High‑precision microscopes for metallographic inspection
A metallographic microscope is a specialised optical instrument designed to reveal the microstructure of metals and alloys, enabling precise analysis of grain size and identification of phases such as ferrite, pearlite and martensite while detecting microscopic defects like inclusions, pores and cracks. Used in industrial quality assurance, these microscopes combine a controlled reflected‑light illumination system, high‑quality objectives with critical numerical aperture and a tube and eyepiece for observation to ensure reliable resolution of fine structural details. Integrated digital camera systems and evaluation software allow norm‑compliant measurement, documentation and reproducible assessment, making them indispensable for material characterisation and process validation.
3x–6x Magnifying Loupe Adjustable, Handheld - Euromex
Take advantage of the combination of adjustable 3×–6× magnification and a sliding adjustment that simplifies close visual inspection; order or request guidance via Metav Werkzeuge for swift supply and specialist advice. Sliding Magnifier 3×–6× — Euromex magnifier with sliding adjustment The Sliding Magnifier 3×–6× is a sliding inspection magnifier offering adjustable 3×–6× enlargement for close visual inspection and detail work. Adjustable 3×–6× magnification Sliding adjustment for quick focus Euromex precision for inspections Precise enlargement for reliable visual checks The Sliding Magnifier 3×–6× provides a clear, variable enlargement range that supports detailed visual assessment in inspection and assembly tasks. The adjustable magnification enables selection of the most suitable enlargement between 3× and 6×, so small features are rendered visibly larger without changing devices. This direct control over magnification reduces handling time and assists in detecting surface defects, markings or assembly misfits; the magnification range is expressed as a simple numeric guide to expected image enlargement. Fast focusing and consistent positioning for routine inspection A sliding adjustment mechanism is used to change magnification smoothly, ensuring quick refocusing when moving between components or assemblies. The sliding adjustment offers repeatable positioning that streamlines repetitive checks and helps maintain a consistent working distance. For workshop and inspection-bench environments, the mechanical simplicity of the sliding action reduces set-up time and lowers the likelihood of misalignment during short, frequent inspections. Integrating simple magnification into everyday workflows This magnifier is suited to a variety of close-visual tasks in laboratories, production lines and repair benches where moderate enlargement is required. By using a single, adjustable unit, inspection workflows can be kept straightforward and compact, avoiding the need for multiple fixed-power lenses. The magnifier’s function supports clearer decision-making at critical control points and can be used alongside other measurement tools to complement dimensional checks. Supportive information and transparent supply from Metav Metav stands for the democratisation of precision, combining extensive product ranges with reliable supply from Emmerich. For technical clarification or to confirm suitability for a specific inspection task, further details can be provided by specialists who understand the requirements of workshop and metrology environments. The magnifier is positioned as a practical visual aid intended for routine inspection rather than as a substitute for precision measuring equipment. Contact Metav Werkzeuge for availability and technical advice on the Euromex Sliding Magnifier 3×–6×; call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored support and order facilitation Technical data Article number: PB.5030 Label: Sliding Magnifier 3×–6× Brand: Euromex Facts Magnification range: 3×–6× SKU / UID: PB.5030 Special features Sliding adjustment mechanism Product type: Magnifier FAQ What magnification range does the magnifier cover? The Euromex Sliding Magnifier covers an adjustable 3×–6× magnification range for variable enlargement during visual inspection. Is this magnifier suitable for bench inspection tasks? Yes, the magnifier is designed as a sliding inspection magnifier and is suitable for bench and close-visual tasks where moderate enlargement is required. Which brand and article number identify this magnifier? This product is supplied by Euromex and is listed under article number PB.5030. Can the magnification be changed quickly between inspections? The sliding adjustment permits fast changes of magnification, enabling rapid refocus between items during routine inspections. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
4 mm Planachromatic PLM 20x/0.40 Long Working Distance Objective IOS - Euromex
Take advantage of a planachromatic optical design combined with a moderate numerical aperture and a compact working distance for consistent, high-contrast transmitted-light imaging. Order the objective directly via Metav Werkzeuge or consult our specialists for integration guidance. Planachromatisch PLM 20x/0.40 LWD IOS Objective — Objective / Lens by Euromex, 20×, NA 0.40 The Planachromatisch PLM 20x/0.40 LWD IOS objective is a planachromatic microscope objective intended for detailed transmitted-light inspection of uncovered or thin samples, offering a long-working-distance design and no cover glass correction. Planachromatic correction for flat field 20× magnification with 0.40 numerical aperture Long working distance 4 mm No cover glass correction for uncovered samples Enhanced flat-field imaging for reproducible results The planachromatic design delivers a flat field across the visual area, reducing edge curvature and ensuring that structures stay in focus from centre to periphery. This optical correction improves image uniformity and simplifies measurement tasks in routine inspection. By lowering field curvature, the lens reduces the need for frequent refocusing during stage scans and supports reliable visual assessment and documentation workflows. Such optical stability is particularly beneficial where consistent documentation and comparative imaging are required. Suited for uncovered samples and close-focus applications With a long-working-distance configuration and omission of cover glass correction, the objective is optimised for samples prepared without a coverslip or for applications where a coverslip would interfere with the specimen. The absence of cover glass correction means optical performance is prioritised for direct sample observation rather than compensated for additional glass thickness. The working distance characteristic allows safer clearance between sample and lens, useful for thicker specimens or for setups requiring additional manipulation space while maintaining optical performance. Practical compatibility and workshop-grade reliability The lens features an IOS optical system and a robust mechanical mount designed for repeated use in laboratory and vocational environments. Its mechanical and optical build supports stable alignment and longevity in busy microscopy suites. Supplied by Euromex and distributed via Metav, the component integrates into typical optical benches and standard microscope turrets when thread and tube-length match; compatibility checks are advised prior to fitting. The compact, purpose-built construction balances handling convenience with reliable optical output for inspection, teaching or light industrial tasks. For precise flat-field imaging with this Euromex objective, contact Metav Werkzeuge to confirm system compatibility and integration details — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: OX.8220 Label: Planachromatisch PLM 20x/0.40 LWD IOS objective Manufacturer: Euromex Microscopen bv Product type: Objective / Lens Facts Magnification: 20× Numerical aperture: 0.40 Working distance: 4 mm Special features Planachromatic correction LWD (long working distance) IOS optical system No cover glass correction FAQ What benefit does a planachromatic objective provide compared with standard optics? A planachromatic objective reduces field curvature and chromatic aberration, so images remain sharp across the field; the Euromex Planachromatisch PLM objective offers consistent edge-to-edge clarity for reliable inspection. Can this objective be used for preparations with a coverslip? This objective has no cover glass correction, so optical performance is optimised for uncovered samples; using a coverslip will alter the imaging plane and may require an objective designed for cover glass compensation. Is the lens appropriate for industrial inspection and teaching laboratories? Yes — the Euromex objective combines flat-field correction and a robust mount suited to repeated use in teaching, inspection and light industrial environments; check mechanical compatibility with the microscope turret before fitting. How can the OX.8220 be integrated into an existing microscope? Integration depends on the microscope’s objective thread and tube specification; confirm compatibility with the Euromex Planachromatisch PLM 20x/0.40 LWD IOS objective and Metav can advise on mounting and system matching. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
4 Slide Mailer Box Cardboard 4-Slide Capacity, Pack Options 50/200 - Globe Scientific
Take advantage of the combination of practical handling, reliable protection and compact storage for a streamlined laboratory workflow; order the slide shipping containers directly via Metav Werkzeuge or ask our consultants for additional information. Slide shipping container for 4 microscope slides 513004 — Cardboard shipping and storage unit, capacity 4 Slide shipping container for 4 microscope slides 513004 is designed for secure transport and compact storage of standard microscope slides in laboratories, clinics and educational facilities. Holds 4 standard microscope slides Made from recyclable cardboard Available in packs of 50 or 200 Secure transport for fragile samples and streamlined handling The slide shipping container provides a simple, robust solution for moving and storing microscope slides. Constructed from cardboard, the carrier is lightweight yet offers physical separation between slides to reduce the risk of chipping and scratching during transport. With an internal capacity specified as capacity: 4 slides, the unit suits sample transfers, external analysis shipments and routine internal logistics where small batches of slides are sent between departments. Consistent workflow and easy inventory management The compact format supports systematic handling: trays can be stacked and stored efficiently, and the packs of 50 or 200 simplify replenishment and stock control. The straightforward design reduces handling time and the likelihood of mix-ups, contributing to a more efficient laboratory workflow. For facilities that process slides in small batches, the container acts as a convenient intermediary between preparation and analysis stages. Material choice that balances economy and responsibility Made from cardboard, the container is a cost-effective option that aligns with common laboratory disposal streams. The material keeps the unit lightweight for shipping while offering a practical level of protection for standard glass slides. Cardboard is widely accepted for recycling, which helps laboratories meet environmental targets without compromising basic containment and transport needs. Packaging options and logistical clarity for purchasing Supplied as packs of 50 or 200, the product adapts to inventory strategies from small clinics to larger laboratory departments. The item is listed under SKU 513004, enabling straightforward ordering and stock tracking. The simple specification—cardboard construction and a fixed four-slide capacity—makes compatibility checks and storage planning effortless when integrating the unit into existing supply chains. For dependable supply and concise product guidance, contact Metav Werkzeuge for ordering and availability — Metav Werkzeuge can advise on packaging quantities and delivery from Emmerich to keep operations running smoothly. Technical Data Article number: 513004 Manufacturer article number: 513004 Label: Objektträger-Versandbehälter für 4 Objektträger 513004 Product type: Slide shipping container Brand: Globe Scientific Material: Cardboard Capacity: 4 microscope slides Packaging unit: 50 or 200 pieces Data Capacity: 4 slides Packaging: 50 or 200 pieces SKU: 513004 Special features Material: Cardboard Use: Shipping and short-term storage of microscope slides Description: Shipping container for 4 microscope slides FAQ How many slides does the container hold? The slide shipping container for 4 microscope slides 513004 by Globe Scientific holds four standard microscope slides per unit. What material is the container made from? The container is made from cardboard; the Globe Scientific slide shipping container 513004 is intended for economical transport and storage rather than sterile preservation. In which pack sizes is the product supplied? The item is supplied in packs of 50 or 200, enabling selection of quantities to match laboratory throughput. Is the container suitable for long-term archival storage? The product is designed for transport and short-term storage of microscope slides; for long-term archival storage, purpose-designed archival materials should be considered. How can the product be identified when ordering? Order using SKU 513004 or the manufacturer article number 513004 to ensure the correct slide shipping container by Globe Scientific is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4/10/S40/S100x MicroBlue Digital Microscope 5 MP Camera, Monocular - Euromex
Take advantage of the combination of a 5‑MP integrated camera, a monocular head and a broad magnification range to improve inspection speed and image documentation; order the MicroBlue MB.1155-5 directly via Metav Werkzeuge or consult the Metav team for tailored advice. MicroBlue MB.1155-5 digital microscope with integrated 5‑MP camera and versatile magnifications — Euromex The MicroBlue MB.1155-5 is a monocular digital microscope designed for routine visual inspection and image documentation in laboratories, vocational training and quality control environments. Integrated 5‑MP camera for crisp imaging Monocular head for straightforward observation Wide magnification range up to 100× Precise imaging for reliable inspection results The built‑in 5‑MP camera captures detailed images that support consistent visual inspection and documentation. A five‑megapixel sensor corresponds to several million pixels, which preserves structure and contrast when examining small features; this enables clearer defect recognition and faster decision‑making in production and QC processes. The emphasis is on reproducible visual records rather than subjective notes, so photographic evidence can be archived for traceability and process control. Bold, sharp images aid both routine checks and training. Flexible magnification for varied applications A selection of objective magnifications (listed as 4×, 10×, 40×, 100×) provides practical versatility for tasks from coarse overview to fine-detail examination. The available magnification steps reduce the need for multiple instruments and make the instrument suitable for component inspection, educational demonstrations and material surface checks. The monocular configuration keeps operation simple and space‑efficient, while the optical range supports quick switching between overview and detail without complex adjustments. Clear workflow integration and straightforward handling Designed as a digital inspection aid, the instrument focuses on streamlined image capture and rapid visual assessment. The combination of an integrated camera and a compact monocular head means fewer external accessories are required, supporting tidy bench organisation and faster handover between operators. For teams that document findings, the apparatus simplifies image acquisition so records are created in the same session as the inspection, helping to maintain work continuity and auditability. Contact Metav Werkzeuge for expert guidance on the Euromex MicroBlue MB.1155-5 and to arrange supply or specification advice; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: MB.1155-5 SKU: MB.1155-5 Label: MicroBlue Digitalmikroskop MB.1155-5, integrierte 5-MP-Kamera Core data Resolution: 5 MP Magnifications: 4× / 10× / 40× / 100× Features Product type: Digital microscope Model series: MicroBlue Microscope head: monokular Manufacturer: Euromex FAQ What image quality can be expected from the integrated camera? The integrated 5‑MP camera delivers multi‑megapixel images suitable for documentation and detailed visual inspection with the MicroBlue MB.1155-5 digital microscope. Is the magnification range suitable for both overview and fine inspection? Yes, the set of objective magnifications (4×, 10×, 40×, 100×) on the MicroBlue MB.1155-5 supports quick transitions between broad overviews and detailed examinations. Is the monocular head practical for workshop use? The monocular configuration simplifies handling and reduces footprint, making the MicroBlue MB.1155-5 appropriate for busy benches and training environments. Can the device be used for documentation in quality control routines? The integrated camera and straightforward operation make the MicroBlue MB.1155-5 a practical tool for producing photographic records during routine QC inspections. Which sectors benefit most from this type of digital microscope? Laboratories, vocational training, electronics inspection and small‑batch production benefit from the clarity and documentation capabilities of the MicroBlue MB.1155-5. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com
4/10/S40/S60x MicroBlue Digital Microscope 5MP Camera Monocular - Euromex
Take advantage of high-resolution imaging and flexible magnification for reliable inspection and documentation; the integrated 5 MP camera and monocular head deliver consistent results for routine laboratory and quality-control tasks. Order the instrument directly via Metav Werkzeuge or consult the team for tailored advice. MicroBlue digital microscope MB.1655-5 (Euromex) – integrated 5 MP camera, monocular head The MicroBlue MB.1655-5 is a monocular digital microscope engineered for routine inspection and clear image capture in educational, laboratory and quality-control environments *Integrated 5 MP camera for precise imaging *Monocular head for compact, ergonomic inspection *Multi-step magnification: 4x, 10x, 40x, 60x *Ideal for lab documentation and quality control Clear documentation through integrated imaging The combination of an integrated 5 MP camera and precise optics provides image files suited to inspection records and basic digital analysis. High pixel count increases detail capture, so fine features and surface textures are recorded more faithfully than with lower-resolution cameras. This capability shortens documentation time and supports reproducible results for lab reports or quality-traceability procedures. The integrated imaging also removes the need for separate camera adapters, simplifying the workflow. Flexible magnification for diverse inspection tasks With a set of objective magnifications covering 4x, 10x, 40x and 60x, the instrument adapts to a wide range of sample sizes without complex reconfiguration. Low-power settings provide broad field-of-view checks, while higher powers reveal finer detail for defect assessment or educational demonstration. The available magnification steps support both overview work and focused inspection, making the device suitable for routine incoming inspections and basic laboratory microscopy alike. Compact optical design that supports regular use A monocular head keeps the instrument compact and easy to position on crowded benches or teaching tables. The simplified head design reduces setup time and improves accessibility during repetitive tasks. Built to blend into busy work environments, the device offers an ergonomic balance between performance and space efficiency, ensuring steady operation during routine measurement and visual checks without occupying excessive bench area. Practical value and supplier reliability As a member of the MicroBlue series from Euromex, this digital inspection instrument emphasises reliable imaging and straightforward operation rather than high-end research features. For workshops and laboratories seeking consistent documentation capability, the unit combines usable optics with integrated capture functionality to support daily quality tasks. Metav’s distribution ensures dependable supply and access to technical information from Emmerich, reinforcing long-term availability for industrial or educational users. Contact Metav Werkzeuge for personalised technical advice or to secure supply of the Euromex MicroBlue MB.1655-5 directly from Emmerich; advisers can provide datasheets and delivery information tailored to the application Technical data Article number: MB.1655-5 Product type: Digital microscope Brand: Euromex Model series: MicroBlue Key specifications Resolution: 5 MP Objective magnifications: 4x; 10x; 40x; 60x Design and features Monocular head Integrated 5 MP camera Label: MicroBlue digital microscope MB.1655-5 FAQ What image quality can be expected from this digital microscope? The integrated 5 MP camera in the MicroBlue MB.1655-5 records images with sufficient detail for routine inspection and documentation tasks; the higher pixel count improves clarity for surface and feature analysis. Which magnifications are available and how do they help inspection? The instrument offers 4x, 10x, 40x and 60x steps, enabling broad overview checks at low power and detailed observation at higher power for defect detection and educational demonstrations. Is the head type suitable for bench-top laboratories? Yes, the monocular head of the MicroBlue MB.1655-5 is designed for compact bench-top use; it reduces footprint while maintaining an ergonomic access to specimens. Can this unit be used for quality-control documentation? The combination of multi-step magnification and the integrated 5 MP camera makes the MicroBlue MB.1655-5 a practical choice for routine quality-control imaging and basic digital record keeping. Who manufactures this microscope and what is the model designation? The microscope is produced by Euromex and listed as MicroBlue digital microscope MB.1655-5 (SKU MB.1655-5) Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
400mm-670mm Digital 4K UHD Autofocus MacroZoom 18x Optical Zoom, 8.3MP 1/2.8" CMOS, HDMI USB Wi‑Fi - Euromex
Take advantage of 4K UHD imaging and a long working distance to speed up visual inspection and documentation while retaining flexibility for different setups; order the MacroZoom series directly via Metav Werkzeuge or contact our consultants for integration advice. MacroZoom MZ.4702 Digital 4K UHD Autofocus Camera — 18× Optical Zoom, Long Working Distance (Euromex) The MacroZoom MZ.4702 is a digital microscope camera designed for macro imaging and industrial inspection, offering a long working distance and multiple interfaces for seamless integration into inspection and documentation workflows. 4K UHD autofocus with 8.3 MP Sony CMOS Optical 18× zoom ratio for detailed macro imaging Long working distance 400–670 mm for flexible setup HDMI, USB and Wi‑Fi interfaces for easy integration Computer and tripod-alone operating modes Capture fine detail with high-resolution 4K imaging The camera module combines a Sony 1/2.8 inch CMOS sensor with 4K UHD capture and an effective 8.3 MP output, enabling high-detail stills and video for traceable documentation. The autofocus system reduces setup time and keeps images sharp across varying sample heights, which translates into fewer re-shoots and a more efficient inspection routine. This clarity supports visual quality control, archival imaging and post-process analysis without relying solely on subjective observation. Configure setups freely thanks to the long working distance and interfaces A working distance of 400–670 mm provides ample clearance for larger components, manipulation tools or fixtures beneath the lens, allowing inspections to proceed without compromising access. Multiple connection options — HDMI, USB and Wi‑Fi — permit local display, PC capture or networked streaming as required by the workflow. The system supports both direct tripod-alone operation and integration into computer-based inspection stations, making it adaptable to bench-top quality control as well as production-line documentation. Streamline inspection workflows and documentation Operating modes that include computer capture and standalone tripod use simplify daily procedures: the computer mode enables image capture, measurement overlays and file management, while the tripod-alone mode is suited to quick checks and demonstrations. Faster imaging cycles and reliable data output reduce process time and improve traceability in routine checks, saving technician hours and improving throughput. The absence of built-in illumination means the unit is best paired with purpose-fit lighting to achieve consistent results across materials and finishes. Built for industrial inspection, research and training Designed for demanding environments, the MacroZoom system is appropriate for visual inspection, educational demonstration and lab-based observation. The combination of long working distance, high optical magnification and robust connectivity makes it a practical choice for users who require clear macro imaging without complex integration. The Euromex heritage ensures a focus on optical quality and durable construction, supporting repeated use in production and training contexts. Discuss specifications and order options with Metav Werkzeuge: contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and reliable supply from Emmerich Technical Data Article number: MZ.4702 Product type: Digital microscope / digital camera Model series: MacroZoom Brand: Euromex Core specifications Resolution: 8.3 MP Sensor: CMOS Sensor format: 1/2.8 inch Optical zoom ratio: 18× Working distance: 400 to 670 mm Interfaces: HDMI, USB, Wi‑Fi Features Autofocus Sony 1/2.8 inch 4K CMOS sensor Computer mode and tripod-alone mode No integrated illumination FAQ What sensor and resolution does the system use? The MacroZoom MZ.4702 is built around a Sony 1/2.8 inch CMOS sensor and delivers an effective 8.3 MP resolution for 4K UHD imaging. Is there integrated illumination with this camera? No, the MacroZoom MZ.4702 does not include built-in illumination; external lighting is recommended for consistent results under varying material and surface conditions. Can the camera stream to a PC or display in real time? Yes, the device supports HDMI, USB and Wi‑Fi connections for live display, PC capture and networked streaming in inspection setups. What is the usable working distance for inspections? The working distance ranges from 400 to 670 mm, providing clearance for fixtures, tools or larger samples during macro inspection tasks. Is this device suitable for industrial quality control? Yes, the combination of high optical zoom, 4K imaging and robust interfaces makes the MacroZoom MZ.4702 suitable for visual inspection, documentation and educational demonstration in industrial and laboratory environments. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
400mm–670mm Digital 4K UHD Autofocus MacroZoom With 18× Optical Zoom, Sony 1/2.8" CMOS, HDMI USB Wi‑Fi - Euromex
Take advantage of the combination of 4K imaging, autofocus and a long working distance to speed up visual inspections while protecting delicate samples; order the MacroZoom MZ.4702-HDS directly via Metav Werkzeuge or ask the consultants for integration guidance. MacroZoom MZ.4702-HDS — 4K UHD autofocus digital microscope with 18× optical zoom and 11-inch HD monitor The MacroZoom MZ.4702-HDS is a digital microscope designed for inspection, documentation and assembly control in workshops and production environments, offering high-resolution imaging and a flexible long working distance. 4K Sony 1/2.8-inch CMOS sensor Optical 18× zoom ratio Long working distance 400–670 mm 11-inch HD monitor with multiple interfaces High-detail inspection with true 4K capture for reliable decisions The integrated Sony 1/2.8-inch 4K CMOS sensor and autofocus deliver sharp, high-resolution images that make fine details visible without time-consuming manual focus adjustments. The imaging chain provides 4K UHD output for clear on-screen evaluation and precise documentation, which is particularly beneficial where defect detection or traceability is required. By combining high optical performance and an accurate focus mechanism, the system reduces inspection time while increasing confidence in pass/fail decisions. Flexible display and connection options to fit the workflow An 11-inch HD monitor is supplied for immediate viewing and operator interaction, with the camera offering multiple connections — HDMI, USB, Wi‑Fi and an internet interface — for live streaming, recording or integration with a PC. The device supports both computer mode for direct capture into inspection software and a stand-alone tripod mode for mobile or bench-top work. These options enable straightforward integration into existing documentation chains and remote collaboration without complex retrofit. Long working distance and 18× optical zoom to protect parts and speed setup The optical 18× zoom ratio combined with a working distance of 400–670 mm allows inspection of larger assemblies or awkward geometries without moving parts or risking collision with the lens. This range is useful when working with sensitive electronic assemblies, finished components or tooling that must not be contacted. The zoom provides a broad field of view at low magnification and fine detail at higher magnification, meaning fewer set-ups and a more efficient inspection routine. Practical benefits for production and quality control environments Designed for practical everyday use, the MacroZoom system supports rapid visual verification, training demonstrations and process monitoring. Supplied without lighting, the camera is compatible with existing illumination solutions, allowing selection of the most suitable light for the task—diffuse, coaxial or focused LED sources—to achieve the required contrast. The combination of autofocus, multiple interfaces and the included monitor makes the unit a versatile inspection camera for workshops, laboratories and production lines where reliable visual evidence and repeatable results are needed. Contact Metav Werkzeuge for tailored advice on integrating the MacroZoom MZ.4702-HDS into inspection processes and to arrange delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: MZ.4702-HDS Product type: Digital camera / digital microscope Model series: MacroZoom Manufacturer: Euromex Delivered with: 11-inch HD monitor Supplied without lighting Facts Working distance: 400 to 670 mm Optical zoom ratio: 18× Sensor: Sony 1/2.8-inch 4K CMOS Screen diagonal: 11 inches Resolution: 4K UHD Special features Autofocus Computer mode Stand-alone tripod mode HDMI, USB, Wi‑Fi, internet interface No lighting included FAQ Is external lighting required for reliable imaging? The MacroZoom MZ.4702-HDS is supplied without lighting; suitable external illumination is recommended to achieve optimal contrast and consistent results for different materials and surface finishes. What does the 400–670 mm working distance mean for assembly inspections? A working distance of 400–670 mm allows the inspection camera to view larger assemblies or delicate parts without contact, reducing collision risk and speeding up setup for incoming or final inspections. Can the unit stream images to a PC or a network? Yes; the device supports HDMI, USB and Wi‑Fi connections and includes an internet interface, enabling live streaming, capture to PC and remote viewing for documentation and collaboration. Is the autofocus suitable for mixed magnification tasks? The autofocus function stabilises focus across the zoom range, making it practical to switch between broad overviews and detailed close-ups without lengthy manual refocusing. Which applications benefit most from this inspection camera? The system suits quality control, electronics inspection, assembly verification, training demonstrations and any task requiring high-resolution visual documentation with a safe, long working distance. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
400mm–670mm Digital Autofocus MacroZoom Camera With 32GB SD, HDLI Cable, 76mm Ring Adapter - Euromex
Take advantage of the precise autofocus MacroZoom imaging, the extended 400–670 mm working distance and the ready-to-use accessories such as the 32 GB SD card for fast documentation; order the Euromex MZ.4707 directly via Metav Werkzeuge or ask the consultants for tailored configuration advice. MZ.4707 Digital Autofocus MacroZoom – digital microscope with 400–670 mm working distance and included accessories (Euromex) The MZ.4707 is a digital autofocus MacroZoom camera designed for industrial inspection and documentation at a 400 to 670 mm working distance. Autofocus MacroZoom optics 400–670 mm working distance Includes 32 GB SD card and HDLI cable Compatible with MZ.4714 and NZ.9047 tripods Inspect large assemblies without compromising detail The MacroZoom system delivers a non-contact inspection solution able to image components across an extended 400 to 670 mm working distance, which reduces the need for repositioning delicate or bulky parts. The built-in autofocus mechanism keeps subject detail sharp over the zoom range, shortening cycle times in quality control and enabling rapid visual checks on assemblies that cannot be brought close to the optics. This approach lowers handling risk and increases throughput while maintaining traceable image capture for reporting. Ready for immediate documentation and live review Included delivery items allow quick commissioning on the workbench: a 32 GB SD card for local image storage and an HDLI cable for live feed to a monitor or capture card. The supplied 76 mm ring adapter and the external 100–240 Vac / 12 Vdc-3 A power supply support fast set-up with industry-standard tripods and stands, reducing integration time in lab or production environments. These components mean the system is prepared for immediate use as a digital documentation station, supporting traceability and audit workflows. Flexible illumination and mounting for consistent results The optical head is supplied without an integrated ring light, so lighting can be tailored to the application; an external light source (for example LE.5207 or LE.5212) is required to achieve consistent, repeatable illumination. The 76 mm ring adapter facilitates the use of ring lights or other lighting accessories, while compatibility with the MZ.4714 standard tripod or the NexiusZoom NZ.9047 ensures stable positioning. This modular concept enables optimisation of contrast, shadowing and colour rendering for inspection, assembly control or educational demonstrations. Integration into inspection and documentation workflows As a compact digital microscope camera, the unit supports both snapshot documentation and continuous live observation via the included HDLI interface. The combination of autofocus MacroZoom optics and onboard storage simplifies defect documentation and archive creation, while the extended working distance enables measurements and visual checks on finished parts without dismantling fixtures. The system is suitable for laboratories, workshops and training facilities that require reliable visual records and quick data capture. Contact Metav Werkzeuge for tailored advice on configuring the Euromex MacroZoom system with the lighting and tripod best suited to the application, or to arrange an order via Metav Werkzeuge’s sales team at info@metav-werkzeuge.com / +49 2822 7131930. Technical Data Article number: MZ.4707 Product type: Digital camera / digital microscope Series: MacroZoom Facts Working distance: 400 to 670 mm Power supply: 100–240 Vac / 12 Vdc-3 A SD card: 32 GB Ring adapter: 76 mm Special features Autofocus MacroZoom optics Supplied without integrated ring light Included HDLI cable Compatible with tripods MZ.4714 and NZ.9047 Requires external light source (e.g. LE.5207, LE.5212) Supplied with 32 GB SD card and 76 mm ring adapter FAQ What working distance does the system support? The system provides an extended working distance of 400 to 670 mm, suitable for inspecting larger or fragile assemblies without close proximity. Is lighting included with the camera head? The camera is supplied without an integrated ring light; the MZ.4707 requires an external light source (examples: LE.5207, LE.5212) connected via the 76 mm ring adapter. Which accessories are supplied for immediate use? The delivery includes a 32 GB SD card, an HDLI cable, a 76 mm ring adapter and an external 100–240 Vac / 12 Vdc-3 A power supply for quick commissioning. Can the camera be mounted on a tripod or stand? Yes; the system is compatible with the MZ.4714 standard tripod and the NexiusZoom NZ.9047 for stable mounting during inspection tasks. Is the device suitable for live image review on a monitor? Yes; the included HDLI cable enables live output for on-screen review, recording and integration with documentation workflows. Manufacturer / Responsible: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Netherlands; info@euromex.com
400–700 nm Handheld Spectroscope with 589 nm Reference Marking, Precision Optics - Euromex
Compact handheld spectroscope with a 400–700 nm wavelength scale and a fixed 589 nm reference marker for rapid visual checks; combines simple, reliable spectral identification with robust portability. Order the handheld spectroscope directly via Metav Werkzeuge or ask our consultants if needed. Handheld spectroscope SP.5200 — 400–700 nm wavelength scale, 589 nm marker (Euromex) The handheld spectroscope SP.5200 is a compact visual instrument designed for straightforward identification of emission lines across the visible band, suitable for quick checks in workshops, teaching environments and basic laboratory verification. Compact handheld design for quick checks Wavelength scale 400–700 nm Fixed 589 nm sodium-line marker Portable design for field and teaching use Fast visual verification across the visible spectrum The instrument provides immediate visual reference within the visible spectrum, covering 400–700 nm, which encompasses most common emission and absorption lines encountered in basic material checks and demonstrations. The built-in wavelength scale enables direct reading of spectral positions without complex electronics, so the user can perform a rapid visual verification of sources such as lamps or simple emission samples. This approach reduces process interruptions by offering a quick, low-complexity method for confirming spectral features before committing to more involved analyses. Reliable single-line reference for repeatable checks A clearly marked 589 nm position corresponds to the well-known sodium D line, used here as a stable visual reference. The fixed marker supports repeatable comparisons and simplifies the identification of nearby lines, which is particularly useful when distinguishing closely spaced features in the visible band. By providing a recognisable reference, the device reduces interpretation time and helps maintain consistent results across routine inspections and educational demonstrations. Portable design that supports routine inspection and teaching Designed as a handheld tool, the unit prioritises portability and straightforward handling to suit on-the-spot checks and classroom use. The compact optical arrangement and clear scale make the instrument well suited for quick spectral orientation and basic quality-control tasks, where speed and ease of use matter. Built to accompany everyday workflows, the spectroscope complements more advanced instrumentation by serving as an immediate first-step diagnostic for visible-light spectral characteristics. For technical advice or to reserve the Euromex handheld spectroscope SP.5200 for workshop, teaching or routine inspection purposes, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930; our Emmerich-based team will advise on suitability and availability. Technical data Article number: SP.5200 Name: Handheld spectroscope with wavelength scale 400–700 nm and marker at 589 nm Manufacturer: Euromex Product type: Spectroscope UID: SP.5200 Core specifications Wavelength range: 400–700 nm Reference marker: 589 nm Features and applications Handheld visual spectroscope Wavelength scale for direct reading 589 nm sodium-line reference Portable design for field and teaching use Quick spectral checks and demonstrations FAQ What wavelength range does the instrument cover? The spectroscope covers the 400–700 nm range, allowing visual observation of the main features within the visible spectrum. What is the purpose of the 589 nm marking? The 589 nm marking denotes the sodium D line and serves as a clear visual reference for repeatable identification and comparison of nearby spectral features when using the SP.5200. Is the spectroscope suitable for classroom demonstrations? Yes, the compact, handheld format and direct wavelength scale make the unit well suited to demonstrations and basic teaching exercises where a quick visual representation of spectral lines is required. Can the device identify specific elements by itself? The spectroscope provides visual positions of emission lines and a reference marker; it supports preliminary identification but is not a substitute for quantitative spectrometers when precise element analysis is required. Which manufacturer produced this instrument? This instrument is supplied by Euromex and is sold under the SKU SP.5200 for straightforward ordering and reference. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
40mm Additional 2× Lens Working Distance, Microscope Objective - Euromex
Benefit from enhanced inspection capability and retained working space thanks to the extended optical reach and compact design; the accessory supports precise handling and integration into existing optical setups. Order the lens directly via Metav Werkzeuge or consult our specialists for application and fit advice. Euromex Additional 2× Objective Lens — 40 mm working distance The Euromex Additional 2× Objective Lens is an auxiliary objective designed to increase magnification for visual inspection and quality checks while preserving a usable clearance between the optics and the specimen. 2× auxiliary magnification 40 mm working distance for manipulation Compact optical accessory Simple mechanical integration Keep access to the sample while increasing magnification The Euromex Additional 2× Objective Lens acts as an auxiliary lens that raises the effective magnification of an optical system without forcing the operator to work at an impractically short distance. The defining characteristic, a 40 mm working distance, ensures that tools or probes can be manoeuvred beneath the objective during inspection or assembly tasks, reducing interference and improving workflow. For users in small-scale production or laboratory inspection, this means improved process reliability and fewer handling constraints. Optical performance aligned with inspection and workshop metrology Engineered as an objective lens accessory, the element emphasises clear imaging for surface inspection and measurement preparation. The optical design maintains optical clarity across the field so that fine edges, solder joints and surface defects remain visible when magnification is increased. This makes the component particularly suitable for routine visual metrology and workshop inspection tasks where clear, repeatable views are required to support decision-making and quality control processes. Practical fit, routine handling and maintenance The accessory is a passive optical component that requires no electricity and integrates mechanically into compatible microscope heads or adapters. Installation is straightforward and reversible, enabling quick changes between inspection magnifications. Cleaning and care follow standard optical procedures to preserve lens coatings and image quality; gentle cleaning with lens-grade tissues and approved solutions is recommended. If further specification or fit confirmation is required, technical advice is available from Metav Werkzeuge and the Euromex product documentation. For precise inspection tasks that demand extra reach and reliable handling, contact Metav Werkzeuge in Emmerich to discuss the Euromex Additional 2× Objective Lens and obtain tailored advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: MZ.4622 SKU: MZ.4622 Name: Additional 2× objective lens Manufacturer: Euromex Facts Working distance: 40 mm Magnification factor: 2× Special features Product type: Objective / lens Passive optical accessory Designed for visual inspection and assembly tasks FAQ What magnification is provided by the accessory? The accessory delivers a 2× magnification factor; the Euromex Additional 2× Objective Lens increases the effective magnification of the host optical system for more detailed inspection. Will the lens allow space to work under the objective? Yes, the specified 40 mm working distance ensures clearance for manipulation and probing during inspection and assembly applications with the Euromex Additional 2× Objective Lens. Is the lens suitable for metrology and workshop inspection? The objective lens accessory is intended for visual inspection and workshop metrology tasks where improved magnification and maintained working distance support repeatable assessments. How should the lens be cleaned and maintained? Clean the optical surfaces with lens-grade tissues and approved cleaning fluids; handle as a precision optical component to preserve image quality and coating performance. Does the product require electrical power or additional components to function? No, the Additional 2× Objective Lens is a passive optical accessory and does not require a power supply; integration relies on mechanical fitting to the host optical system. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
40mm Euromex LED Lighting Station With Dual Flexible Gooseneck Lamps, 6500K, Dimmable 5V DC - Euromex
Take advantage of precise, neutral daylight illumination and fully adjustable positioning to improve inspection accuracy and repeatability; the combination of two dimmable gooseneck LED heads and an LED transmitted light plate reduces preparation time and enhances contrast for both opaque and translucent samples. Order directly via Metav Werkzeuge or consult our specialists for tailored setup advice. Euromex LE.5212 Lighting Station — Two white LED goosenecks, 6500 K The LE.5212 is a compact Euromex lighting station for inspection benches and microscopes, combining two independently adjustable gooseneck LEDs with an LED ring light and a transmitted light plate for versatile sample illumination. Two independently adjustable goosenecks Integrated LED ring light for surface lighting LED transmitted light plate for translucent samples Dimmable output with 6500 K colour temperature Precise, neutral illumination for inspection and imaging The dual-arm configuration delivers controlled, repeatable light positioning for a wide range of inspection tasks. Each top-light is an LED rated at 3 W, producing a neutral 6500 K daylight spectrum that helps render colours consistently under magnification. The dimmable control enables the reduction of glare and the optimisation of contrast without changing the optical setup, which shortens inspection cycles and supports reliable visual or camera-based measurements. Compact dimensions: 40 mm (H) × 200 mm (W) × 65 mm (D) and a modest weight of 1.9 kg make the unit suitable for small benches and portable workstations while preserving steady illumination. Improved contrast and translucency control with ring and transmitted light Built-in illumination options combine to handle both opaque surfaces and semi‑transparent specimens. The ring light provides even, shadow‑free surface illumination ideal for texture and defect detection, while the transmitted light plate ensures backlighting for thin or translucent materials, improving edge definition and internal feature visibility. This combination reduces the need for additional lamps and simplifies workflow for quality control, assembly inspection or documentation tasks. The compact footprint of the unit keeps the workspace clear, enabling easier sample handling and camera alignment. Reliable mains compatibility and efficient operation for continuous use The lighting station accepts a broad mains range (100–240 V AC, 50/60 Hz) and provides a low‑voltage 5 V DC supply for the LEDs, ensuring compatibility with international power supplies and stable operation in busy production environments. The LED technology delivers energy-efficient, low‑heat performance, which prolongs component life and reduces maintenance intervals compared with older halogen systems. The illumination unit is compatible with accessory modules LE.5260–LE.5263, offering straightforward expansion options for tailored inspection setups and integration into existing workstations. Contact Metav Werkzeuge today to specify the Euromex LE.5212 lighting station for a tailored inspection or microscopy setup and to discuss compatible accessories—email info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance Technical data Article number: LE.5212 Product type: Lighting station Brand: Euromex Weight: 1.9 kg Dimensions: 40 mm (H) × 200 mm (W) × 65 mm (D) Facts Frequency: 50/60 Hz Mains voltage range: 100–240 V AC Supply voltage: 5 V DC Number of top-light sources: 2 Top-light power per source: 3 W Colour temperature: 6500 K Special features Two independently dimmable gooseneck arms LED ring light LED transmitted light plate Brightness adjustable LED illumination true Compatible with: LE.5260;LE.5261;LE.5262;LE.5263 FAQ Is this lighting station suitable for stereo microscopes? The Euromex LE.5212 lighting station is designed for close‑range inspection and microscopy use, with ring and transmitted illumination options that support stereo microscope observation and documentation. Can the brightness be adjusted for sensitive samples? Yes, the unit features dimmable control for both gooseneck LEDs, allowing the light level to be reduced to avoid sample heating or glare during delicate inspections. What colour temperature does the illumination provide? The illumination is specified at 6500 K, a neutral daylight spectrum that supports accurate colour rendition for inspection and imaging tasks. What power and mains connections are required? The lighting station accepts 100–240 V AC at 50/60 Hz and operates with a 5 V DC LED supply, ensuring compatibility with standard international power systems. Which accessories are compatible with this lighting station? Compatible items include models LE.5260, LE.5261, LE.5262 and LE.5263, which can expand or adapt the illumination setup for specific inspection requirements. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com
40mm Frosted Glass Filter With Polarisation Accessory - Euromex
Take advantage of a compact frosted glass diffusion element with a precise Ø40 mm diameter and straightforward integration into polarisation accessory sets; order via Metav Werkzeuge or consult our specialists for compatibility advice. Frosted glass filter Ø40 mm — Filter / polarisation accessory by Euromex A frosted glass filter Ø40 mm designed to act as a diffusion element in polarisation and lighting accessory assemblies for microscopy and optical inspection Frosted optical glass for even light diffusion Ø40 mm diameter for standard condenser ports Compatible with polarisation accessory sets Consistent, shadow‑free illumination for precise inspection The frosted surface of this diffusion element scatters incident light to produce a more uniform illumination field, reducing localised bright spots and softening contrast transitions. This makes it easier to inspect delicate surface details under polarised lighting without introducing artefacts from direct light sources. The scattering effect is a simple optical principle that helps maintain image consistency across the field of view, supporting reliable visual assessment in routine laboratory or workshop tasks. Practical integration into optical setups and accessory holders With a defined Ø40 mm diameter, the disc is intended for straightforward placement in compatible accessory mounts and condenser stacks. Its compact format allows rapid insertion and removal during optical alignment or when switching between contrast methods. The component’s uncomplicated form factor supports maintenance workflows and minimises downtime during instrument setup, enabling technicians and educators to adapt illumination conditions quickly for different specimens or inspection jobs. Where this element adds value in everyday workflows For microscopy, polarisation and imaging tasks where controlled illumination matters, the frosted disc improves reproducibility of observations and reduces the need for repeated light adjustments. Laboratories, teaching facilities and quality‑control benches benefit from the predictable diffusion properties when comparing samples or documenting results. The simple function of the disc—diffusing light while retaining the overall beam geometry—means it can be specified as a reliable accessory within broader optical assemblies, aiding workflow standardisation and faster decision making. For applications requiring stable, even illumination, consider the Euromex frosted glass filter Ø40 mm and contact Metav Werkzeuge for procurement or technical clarification; Metav’s consultants in Emmerich can advise on fitment and compatibility Technical data SKU: AE.1897 Article: Frosted glass filter Ø40 mm Manufacturer: Euromex Product type: Filter / polarisation accessory UID: AE.1897 Data Diameter: Ø40 mm Special features Frosted glass surface Designed for diffusion in polarisation accessories Compact disc format suitable for accessory mounts FAQ What is the primary function of this filter? The frosted glass filter functions as a light diffuser, providing even illumination for polarisation and lighting accessories to reduce hotspots and improve visual consistency. Will this disc fit standard microscope condenser ports? The disc has a Ø40 mm diameter and is intended for use in accessory holders and condenser stacks that accept a 40 mm element; check mount dimensions before ordering. How does the filter affect polarised light imaging? By scattering light uniformly, the filter maintains the overall beam path while softening intensity variations, which aids polarised imaging by reducing local glare without disrupting polarisation contrast. Is the material specified for this component? The product is supplied as a frosted glass diffusion element designed for optical accessory use. Can the filter be used outside microscopy, for general lighting diffusion? Yes, the diffusion property of the frosted glass makes it suitable for any application requiring softened illumination within the constraints of the Ø40 mm format. Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com
40mm Objective Turret Lowering Attachment, 0.01mm Resolution - Euromex
Take advantage of a compact solution that combines precise optical alignment and straightforward installation to adapt existing microscope setups with an additional 40 mm clearance; order the 40 mm objective turret lowering directly via Metav Werkzeuge or contact the consultants for tailored advice. 40 mm objective turret lowering — Accessory / Component by Euromex, 40 mm reduction for objective turret A compact lowering accessory for microscope objective turrets that creates 40 mm additional clearance for optical and mechanical attachments. 40 mm lowering for objective turret Accessory / Component for microscope setups Stable design for precise alignment Straightforward installation with secure fixing Create space without compromising optical alignment The 40 mm lowering unit provides a defined reduction of the objective turret height to regain clearance for auxiliary devices or customised setups. By lowering the nosepiece by a fixed amount, the accessory enables maintenance of the original optical axis while creating room for camera adapters, illumination modules or other attachments. The design prioritises precision and repeatable positioning to avoid changes in focus or field alignment when components are added or removed. Minimise downtime with predictable integration Integrating the lowering component into an existing bench saves adjustment time: the hardware is intended as a modular accessory for standard microscope assemblies and is presented as a compact, mechanical solution rather than an electronic modification. The result is a reliable way to adapt instrument geometry without complex recalibration, delivering consistent performance across routine tasks and reducing interruption to inspection or documentation workflows. Simple mechanical fit for workshop convenience Engineered for practical handling, the unit is conceived as a component that attaches to the existing turret mounting. Installation focuses on secure fastening and stable seating of the turret at the lowered position, so that mechanical play is minimised and optical reproducibility is preserved. Clear mechanical interfaces and defined mounting points support a fast assembly process and predictable repeatability during daily use. Professional assurance and dealer support for specification checks As a Euromex accessory the lowering element is positioned for professional microscopy applications where controlled optical geometry is required. For customers uncertain whether this component meets a specific instrument configuration or measurement need, technical verification is available from the dealer. The emphasis is on dependable adaptation and documented dimensional change rather than speculative compatibility claims, ensuring a pragmatic route to integration. Contact Metav Werkzeuge for a specification check or order assistance regarding this Euromex accessory and benefit from direct delivery from Emmerich and expert guidance at every stage Technical data Article number: DX.9887 SKU: DX.9887 UID: DX.9887 Label: 40 mm objective turret lowering Product type: Accessory / Component Manufacturer: Euromex Facts Lowering distance: 40 mm Special features Accessory for microscopes Euromex accessory / component Compact mechanical lowering unit FAQ What exactly does the lowering accessory do? The lowering accessory reduces the objective turret height by 40 mm to create clearance while maintaining the optical axis, as specified for the Euromex accessory DX.9887. Is this unit compatible with all microscope brands? Compatibility varies by turret design; the Euromex DX.9887 is an accessory component intended for microscope systems with compatible turret interfaces—technical matching is recommended prior to installation. Will the lowered turret affect image focus or alignment? When correctly mounted, the lowering unit preserves the optical axis and ensures repeatable alignment; the Euromex component is designed to maintain focus and field reproducibility during routine use. Can the unit be removed if a different configuration is needed? Yes, the accessory is a modular component intended for reversible installation; the Euromex DX.9887 supports straightforward removal and reinstallation without permanent modification of the microscope turret. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com
40X Handheld Microscope With Switchable LED Illumination, 50 x 23 x 138 mm - Metav IndustryLine
Benefit from the combination of 40× magnification, consistent LED illumination and a robust polyamide housing to make precise visual checks faster and more reliable; order the Metav IndustryLine M503.111 directly via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine M503.111 — 40× handheld inspection microscope with LED The Metav IndustryLine M503.111 is a compact 40× handheld inspection microscope designed for quick visual checks in optics, electronics and laboratory bench work. High-power 40× magnification for detailed inspection Switchable LED illumination for consistent lighting Polyamide housing, impact-resistant and lightweight Compact 50 × 23 × 138 mm footprint for tight workspaces Faster, more reliable visual inspection with higher magnification The focus of this inspection tool is performance under routine use: the 40× magnification delivers a visibly enlarged image that speeds defect detection and reduces rework. A coated lens improves contrast and reduces stray reflections, which is particularly helpful when examining reflective surfaces or fine structures. Combined with the field of view 4.4 mm, the optical performance balances detail and context—enough scope to inspect a component area without losing the surrounding reference. This consistency supports reproducible quality checks and simplifies documentation of inspection outcomes. Built for portability and daily workshop use At just 0.1 kg and with a compact design (50 × 23 × 138 mm), the inspection microscope is easy to carry between workstations and quick to position over a part. The polyamide housing offers chemical resistance and mechanical robustness while keeping weight low; the result is a handheld tool that feels secure in the hand and tolerates everyday workshop conditions. For operators who must carry tools across inspection benches or use a scope for spot checks on the production line, this combination of low mass and durable material reduces fatigue and improves throughput. Consistent lighting and straightforward integration into inspection routines Reliable illumination is central to visual quality control. The integrated LED illumination provides steady, focused light that reduces shadows and reveals surface texture more clearly than ambient lighting alone. That steadiness supports objective assessments and speeds decision-making during incoming inspection, assembly checks or final visual audits. As part of Metav’s pragmatic range of inspection aids, this handheld scope fits into existing workflows without extensive setup — a practical choice for workshops and labs aiming for dependable, repeatable visual verification. Contact Metav Werkzeuge for tailored advice on how the Metav IndustryLine M503.111 fits specific inspection tasks and to arrange procurement directly from our Emmerich facility Technical data Article number: M503.111 GTIN: 4054469144474 Tariff number: 90111090 Brand: Metav IndustryLine Facts Magnification: 40× Field of view: 4.4 mm Dimensions: 50 × 23 × 138 mm Weight: 0.1 kg Special features Coated lens Housing: polyamide LED illumination Category: Optics Image type: handheld inspection microscope FAQ What magnification does the microscope offer? The Metav IndustryLine M503.111 provides 40× magnification, suitable for detailed checks of small components and surface features. Is the lens treated to reduce reflections? Yes, the inspection microscope is fitted with a coated lens to improve contrast and minimise stray reflections during inspection. How large is the visible area at high magnification? The instrument offers a field of view of 4.4 mm, which balances close detail with sufficient context for practical component inspection. Is the scope suitable for bench and mobile inspections? Its compact dimensions (50 × 23 × 138 mm) and light weight (0.1 kg) make the M503.111 well suited to both bench-top work and quick mobile checks across the workshop. What materials are used for the housing? The housing is made from polyamide, chosen for its mechanical robustness and low mass, supporting frequent handling in workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40x Measuring Microscope LED Illumination 0.05mm Scale Plate - Euromex
Precise optical measurement with 40× magnification and integrated LED illumination supports repeatable visual checks and basic dimensional reading; a fine reticle with 0.05 mm divisions enables comparative measurement on small parts. Order this inspection solution directly via Metav Werkzeuge or request specialist advice from their consultants. PB.5010 measuring microscope – 40× magnification, LED illumination (Euromex) The PB.5010 is a compact measuring microscope designed for bench-top inspection and small-part dimensional checks in workshop and quality-control environments 40× optical magnification Integrated LED illumination Reticle with 0.05 mm divisions Bench-top inspection microscope Reliable detail recognition for routine quality checks The high-magnification optical arrangement delivers clear, enlarged images that simplify visual inspection and comparative measurement tasks. With 40× magnification, the instrument makes small features and surface details accessible without complex setup, which reduces time spent on initial part assessment. The built-in reticle, graduated at 0.05 mm, offers a straightforward reference for quick dimensional estimation and pass/fail checks. For operators who carry out frequent inspections, this level of optical detail supports faster decision-making and fewer measurement cycles, contributing to smoother production workflows. Consistent lighting that improves measurement repeatability Integrated LED illumination ensures steady, shadow-reduced lighting across the field of view, which is essential for repeatable observation and accurate interpretation of the reticle marks. LEDs provide a uniform light source with low thermal output, helping to preserve delicate samples during inspection. Even without advanced lighting controls, the stable illumination enhances contrast and edge definition, so features aligned with the 0.05 mm divisions are easier to read and document. This practical lighting choice supports routine quality-control tasks where visibility and consistency are prime concerns. Practical bench-top use and straightforward integration into inspection routines Designed as a compact inspection tool, the instrument suits workshops, maintenance benches and small laboratories where space and speed matter. The optical setup specifically aids visual comparison and simple dimensional checks without requiring specialised metrology training; operators familiar with standard inspection microscopes will recognise the routine of aligning the specimen to the reticle and reading off divisions. The combination of clear optics and dependable lighting facilitates a rapid transition from visual assessment to further measurement methods if higher precision instruments are required. Supplied as a focused inspection solution, it complements a broader metrology fleet by handling quick checks and initial part sorting efficiently. For procurement or technical clarification regarding the Euromex PB.5010, contact Metav Werkzeuge in Emmerich for ordering and expert advice: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: PB.5010 Product type: Measuring microscope Brand: Euromex Facts Magnification: 40× Reticle division: 0.05 mm Features LED illumination Bench-top inspection microscope Reticle for comparative measurement FAQ What magnification does the instrument offer? The instrument provides 40× magnification, suitable for detailed visual inspection and comparative measurement of small features. How fine is the measurement scale on the reticle? The integrated reticle is graduated with 0.05 mm divisions for straightforward comparative readings. Is the lighting suitable for repeatable inspections? Yes; the LED illumination delivers consistent, low-heat lighting that improves contrast and repeatability during observations with this measuring microscope. Can this device be used for quick quality-control checks on a workshop bench? The PB.5010 is intended as a bench-top inspection microscope for routine checks and initial dimensional assessments in workshop or small-lab environments. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
40x Plan Phase Contrast PLPHi Objective 0.65 NA 0.5mm Working Distance - Euromex
Plan optics and a specialised phase‑contrast design deliver consistently higher image contrast and a flat field across the visual plane; combined with an NA of 0.65 and a precise 0.5 mm working distance, this objective supports demanding cellular and micro‑structural observation. Order the lens directly via Metav Werkzeuge or request technical advice from their consultants. Plan PLPHi S40x/0.65 — Euromex phase‑contrast objective for iScope systems, 40×, NA 0.65 The Plan PLPHi S40x/0.65 is an infinity‑corrected phase‑contrast objective for iScope microscopes, engineered to enhance contrast in transparent specimens while maintaining planarity across the field of view. Phase contrast for enhanced sample contrast Infinity‑corrected optics for system compatibility High numerical aperture 0.65 for resolution Short working distance of 0.5 mm for close observation Precision imaging with improved contrast and resolution The phase‑contrast construction combines a dedicated phase ring with Plan optics to produce higher contrast from weakly scattering specimens; this is especially useful for live cells, thin tissue sections and unstained preparations. With a numerical aperture of 0.65, the objective enables greater light‑gathering ability and improved resolving power compared with lower‑NA alternatives. The optical design is infinity‑corrected, meaning the lens is compatible with modern microscope tubes and objective turrets that rely on an infinity optical path; this simplifies system integration and preserves image quality when intermediate optics or camera adapters are used. Compact working distance and practical handling for lab workflows A working distance of 0.5 mm places the focal plane close to the specimen, supporting high‑magnification observation without significant loss of numerical aperture. Although this short working distance requires careful slide handling and stage control, it delivers an optical advantage by keeping aberrations low and maximising resolution at 40×. The objective is built as a Plan lens, so field curvature is reduced and specimens remain sharp from centre to edge, reducing the need for frequent refocusing and improving throughput in routine inspection tasks. Integration, compatibility and gentle treatment of samples The objective has been designed specifically for the iScope series and is well suited to microscopy set‑ups where phase contrast is required alongside transmitted light techniques. Because it is infinity‑corrected, the lens can be combined with a variety of tube lenses and camera adapters without introducing focal shift, which is important when integrating digital imaging for documentation or measurement. The phase‑contrast mode allows details to be observed without staining, preserving live samples and reducing preparatory steps. What the technical specifications mean in practice Numerical aperture (NA) is a measure of an objective’s light‑gathering capacity and directly affects achievable resolution; a higher NA yields finer detail. The Plan correction minimises field curvature so that a larger usable field remains in focus. The 40× designation indicates the nominal magnification of the optical system when used with the standard tube length or tube lens specified by the microscope manufacturer. These combined attributes make the objective a reliable choice for biology labs, educational facilities and quality control applications where contrast and flatness are essential. Contact Metav Werkzeuge for a tailored recommendation on the Euromex phase‑contrast objective and to arrange delivery or technical consultation from the Emmerich distribution hub Technical Data Article number: IS.8940 UID: IS.8940 Label: Plan PLPHi S40x/0.65 Phasenkontrast IOS unendlich korrigiert Objektiv für iScope. Arbeitsabstand 0.5 mm Facts Magnification: 40× Numerical aperture (NA): 0.65 Working distance: 0.5 mm Special features Product type: Objective / lens Model series: iScope Brand: Euromex Optical correction: Plan optics Imaging mode: Phase contrast FAQ What is the primary application of this objective? This objective is optimised for phase‑contrast imaging of transparent specimens and is commonly used for live cell observation and thin tissue sections; the Plan PLPHi S40x/0.65 provides improved contrast without staining. Is the objective compatible with existing infinity microscope systems? Yes, the lens is infinity‑corrected, so it is compatible with iScope systems and other microscopes that employ an infinity optical path, maintaining correct focal relationships when intermediate optics are used. How does the numerical aperture affect image quality? A higher numerical aperture, such as 0.65, increases light collection and resolution, enabling finer detail to be resolved compared with lower‑NA objectives while improving contrast in phase‑contrast mode. Can the objective be used with digital cameras and adapters? The infinity‑corrected design of the lens supports integration with camera adapters and tube lenses; when paired correctly, imaging performance is preserved and digital capture is facilitated. Does the short working distance require special handling? The 0.5 mm working distance demands careful stage and specimen handling to avoid contact, but it also contributes to higher resolution and reduced aberrations at 40×. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com
40x Plan Stress-Free PLPOLi Objective 0.65 NA, 0.17 mm Cover Glass Correction, 0.54 mm Working Distance - Euromex
Take advantage of the combination of flat-field plan optics, high 0.65 numerical aperture, and precise 0.17 mm cover-glass correction for reliable polarisation imaging; order the objective directly via Metav Werkzeuge or consult our specialists for technical advice. IS.7940-T Plan PLPOLi 40×/0.65 Transmitted-Light Polarisation Objective for iScope (Euromex) The IS.7940-T is a plan, strain-free 40× objective optimised for transmitted-light polarisation work on the iScope series, featuring a 0.17 mm cover-glass correction and a 0.54 mm working distance. Plan, strain-free optics for flat-field correction 40× magnification with 0.65 numerical aperture 0.17 mm cover-glass correction for accurate imaging 0.54 mm working distance for transmitted polarisation Consistent flat-field images for polarisation analysis The objective delivers flat-field plan correction, which keeps the focal plane even across the field of view and reduces curvature that can complicate measurements. The strain-free design avoids internal stress birefringence, making the lens particularly suited to transmitted-light polarisation techniques where artificial stress patterns must be minimised. With a 40× magnification combined with a 0.65 NA, the optic balances resolving power and light-gathering ability, enabling clearer contrast in polarised specimens while maintaining practical depth of focus for routine inspection and documentation tasks. Precise cover-glass correction and practical working clearance A dedicated 0.17 mm cover-glass correction means the optical train compensates for the refractive effects introduced by standard cover slips, preserving image sharpness at the specimen plane. The 0.54 mm working distance gives controlled clearance between the specimen and the front lens, useful for thin-mounted samples and polarising accessories in transmitted-light setups. In practice, this correction and clearance reduce the need for repeated refocusing and ensure that measurements and photo documentation remain consistent across sample batches. Designed for reliable integration into laboratory workflows The lens is engineered for compatibility with the iScope modular objective mount and intended for routine laboratory and educational environments as well as industrial optical inspection. The combination of plan optics, 0.65 NA, and polarisation capability supports applications ranging from materials observation to biological thin sections where reproducible contrast and minimal artefacts are crucial. The construction emphasises optical stability and repeatable performance, which helps maintain throughput in inspection routines and reduces downtime for recalibration. Contact Metav Werkzeuge for personalised guidance on integrating the Euromex IS.7940-T objective into existing microscope setups; consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: IS.7940-T Product name: Plan PLPOLi 40×/0.65 objective Product type: Objective / Lens Brand: Euromex Model series: iScope Facts Magnification: 40× Numerical aperture: 0.65 Cover-glass correction: 0.17 mm Working distance: 0.54 mm UID: IS.7940-T Special features Plan, strain-free optical design Transmitted-light polarisation capability Optimised for iScope microscopes Suitable for polarisation imaging and precise transmitted-light inspection FAQ What cover-glass thickness does the objective compensate for? The IS.7940-T objective is corrected for a 0.17 mm cover glass, ensuring sharp focus and minimal spherical aberration when used with standard cover slips in transmitted-light polarisation work. Is this objective suitable for polarisation techniques? Yes. The IS.7940-T is a plan, strain-free polarisation objective designed expressly for transmitted-light polarisation, reducing internal stress birefringence that can interfere with accurate analysis. Which microscopes is this objective compatible with? The lens is optimised for the Euromex iScope series and interfaces with the iScope objective turret and optical path for straightforward integration. What does a 0.65 numerical aperture mean in practice? A 0.65 NA indicates a balance between resolution and light collection; higher NA improves resolving power and contrast in polarised images while maintaining sufficient depth of field for routine inspection. For which applications is this objective most appropriate? This objective is ideal for transmitted-light polarisation tasks such as thin-section examination, materials inspection requiring minimal stress artefacts, and any application demanding consistent flat-field imaging. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
420nm 1pc Replaceable Self-Supporting Goose-Neck Light Guide Violet LED, Compatible NZ.9018 - Euromex
Robust, replaceable self-supporting gooseneck illumination with a high-performance 420 nm violet LED provides stable, concentrated light for inspection tasks; supplied as a single replacement unit. Order the replacement directly via Metav Werkzeuge or contact the consultants for compatibility advice. LE.5263 – Euromex LED gooseneck light guide with 420 nm violet LED The LE.5263 is a replaceable LED gooseneck light guide offering focused violet illumination for microscopes and inspection stations, designed for use with compatible Euromex units. Replaceable self-supporting gooseneck High-performance 420 nm violet LED Compatible with NZ.9018, LE.5207, LE.5212 Supplied as a single replacement unit Enhanced contrast through precise 420 nm illumination The unit delivers 420 nm emission via a high-performance violet LED, producing a narrow spectral output that enhances contrast in many inspection tasks. This wavelength is particularly effective where fluorescence contrast or heightened surface detail is required, creating clearer visual separation between features without adding heat to the sample. The concentrated beam from the light guide reduces stray light and helps maintain consistent illumination across the field, which supports reproducible inspection results and makes visual measurement work more reliable. Flexible positioning with secure, hands-free operation Designed as a self-supporting gooseneck, the connector provides stable, adjustable positioning so the light source can be directed precisely where needed and stay firmly in place during inspection. The flexible shaft permits fine-tuned alignment without auxiliary clamps, enabling a neat work area and faster set-up. For environments where frequent repositioning is necessary, this solution improves workflow efficiency and reduces time spent re-adjusting external fixtures. Replaceability that minimises downtime As a replaceable module supplied as a single unit, the design simplifies maintenance and keeps spare-part management straightforward. The modular approach shortens repair cycles: a worn or faulty light guide can be swapped without lengthy disassembly of the microscope assembly. Note that Euromex documents show both current and earlier plug versions; before fitting a replacement, the connector type should be matched to the instrument to ensure correct electrical and mechanical fitment and to avoid interruption to inspection routines. Clear compatibility and everyday applications The light guide is explicitly compatible with the listed Euromex items NZ.9018, LE.5207 and LE.5212, making it a direct replacement part for these models. Typical applications include visual inspection under microscopes, quality-control stations, electronics inspection, dental-laboratory work and small-part assembly, where precise, stable illumination improves defect detection and visual decision-making. The compact, single-unit supply format supports straightforward inventory control for workshops and laboratories. For connector checks, spare-part requests or technical advice, contact Metav Werkzeuge for expert guidance and secure the correct Euromex gooseneck replacement for your inspection setup FAQ What wavelength does the light guide emit? The unit emits at 420 nm, a violet LED output that enhances contrast and fine-detail visibility in inspection and microscopy tasks. Which models are compatible with this replacement light guide? Compatibility is specified for NZ.9018, LE.5207 and LE.5212; the LE.5263 is intended as a direct replacement for these Euromex items. Is the gooseneck self-supporting and adjustable? Yes, the component features a self-supporting gooseneck construction that allows secure, hands-free positioning and fine adjustment of the illumination angle. Are there installation considerations for replacement? Euromex documents show current and earlier plug versions; before replacing, match the connector version to the instrument to ensure correct fit and function. How is the product supplied? The item is supplied as a single replacement unit suitable for immediate fitment into compatible Euromex assemblies. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
42mm 0.35x C-Mount Adapter for Olympus Microscopes Eloxated Aluminium - Euromex
Take advantage of precise image scaling and broad compatibility for reliable documentation: the adapter combines a 0.35× optical reduction, compatibility with 42 mm photoports and 1/3‑inch C‑mount cameras, and a robust anodised‑aluminium construction for dependable routine use. Order the adaptor directly via Metav Werkzeuge or consult the team for system matching. 0.35x C‑Mount Adapter for Olympus Microscopes — Adapter with 42 mm photoport and 1/3‑inch camera interface (Euromex) the 0.35x C‑Mount Adapter for Olympus Microscopes is an optical interface designed to link Olympus microscope photoports with standard 1/3‑inch C‑mount cameras while reducing image magnification for a wider field of view 0.35× optical reduction factor Fits 42 mm Olympus photoport Compatible with 1/3‑inch C‑mount cameras Anodised aluminium construction Capture a wider field of view with controlled magnification The 0.35× reduction supplied by this optical adaptor provides a clear, measurable way to increase the field of view when attaching a camera to a microscope. By reducing the microscope image delivered to the camera sensor, the adaptor enables larger sample areas to be recorded without changing objective lenses, which is particularly valuable for documentation and routine inspection. The optical effect is achieved by the integrated lens group; this alters the image scale while preserving the optical axis, so image geometry remains predictable. For practical system planning, the reduction factor and the camera sensor size — in this case 1/3‑inch cameras — determine the final image coverage and effective pixel sampling. Durable mechanical design for laboratory and inspection environments Constructed from anodised aluminium, the adaptor offers resistance to routine handling and provides a stable mechanical fit between the microscope and camera. The metal body minimises flex and preserves optical alignment during repeated mounting cycles, which supports consistent image quality over time. The finish reduces glare and surface wear, assisting long‑term reliability in industrial and educational settings. Compatibility with the Olympus 42 mm photoport and listed microscope ranges ensures a snug, repeatable interface that contributes to streamlined bench workflows. Straightforward compatibility with Olympus microscope lines This adaptor lists direct fitment for major Olympus microscope families, including the CX, CX2, BX, BX2, IX, MX, GX, SZX and STM series, enabling straightforward integration into existing imaging setups. The C‑mount interface accommodates commonly used camera threads, and the presence of both 35 mm and 25.4 mm C‑mount references indicates its alignment with standard thread sizes and optical formats referenced in the product label. When paired with the appropriate camera sensor, the adaptor simplifies system configuration by matching mechanical and optical interfaces without requiring custom machining or additional spacers. Practical imaging considerations and application outcomes In applications such as quality control, routine documentation and educational microscopy, the adaptor reduces the need for frequent objective changes by expanding the observable area at camera level. The change in magnification also affects effective resolution: with the 0.35× factor, pixel sampling increases across a larger area, which is useful for overview imaging but worth considering when fine detail resolution is critical. For process documentation where traceability and consistent framing are priorities, the adaptor supports repeatable imaging conditions and predictable scaling between captures. Contact Metav Werkzeuge today to confirm compatibility with an existing Olympus setup and to secure this Euromex 0.35× C‑Mount adapter (SKU AE.9835‑O); enquiries can be directed via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: AE.9835-O Product type: Adapter Brand: Euromex Short description: 0.35x C‑Mount adapter for Olympus microscopes Data Reduction factor: 0.35× Photoport diameter: 42 mm Camera interface: 1/3‑inch C‑mount Thread sizes referenced: 35 mm, 25.4 mm Special features Material: anodised aluminium Fits Olympus models: CX, CX2, BX, BX2, IX, MX, GX, SZX, STM Designed for use with C‑mount cameras for image documentation FAQ What does the 0.35× reduction mean for image capture? The 0.35× figure indicates the optical scaling applied by the adaptor; it reduces the microscope image delivered to the camera sensor, increasing the visible area per frame when using the AE.9835-O adaptor from Euromex. Which cameras are compatible with this adaptor? The adaptor is specified for 1/3‑inch C‑mount cameras; any camera with a standard C‑mount thread and a 1/3‑inch sensor format will match the mechanical and optical interfaces described for this Euromex adapter. Which Olympus microscope series are supported? The adaptor is listed as compatible with Olympus series CX, CX2, BX, BX2, IX, MX, GX, SZX and STM, allowing integration with a broad range of upright and stereo microscope models. Is the adaptor suitable for routine industrial use? Yes, the anodised‑aluminium construction of the AE.9835‑O supports repeated mounting and handling typical of laboratory and inspection environments, providing mechanical stability for consistent imaging. Will image resolution be affected when using this adaptor? Applying a 0.35× reduction increases the field of view at the camera sensor but decreases the effective sampling density per unit area; this is beneficial for overview imaging but should be considered if capturing very fine detail is essential. Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com
42mm 0.50x C-Mount Adapter for Olympus Microscopes, Eloxated Aluminium - Euromex
Take advantage of the 0.50x optical reduction, broad compatibility with Olympus 42 mm photoports and a robust anodised aluminium body for dependable image capture and long service life; order the adapter directly via Metav Werkzeuge or ask our consultants if needed. AE.9850-O 0.50x C‑Mount adapter for Olympus microscopes — 42 mm photoport, 1/2" C‑Mount An AE.9850-O adapter engineered to couple Olympus microscopes with 1/2‑inch C‑mount cameras, delivering a wider field of view and stable camera alignment for imaging and documentation. 0.50x optical reduction for wider field Fits 42 mm microscope photoport Compatible with 1/2" C‑mount cameras Anodised aluminium construction Capture a larger field with controlled reduction The 0.50x optical element reduces the effective magnification, allowing a larger field of view on standard C‑mount sensors while maintaining image sharpness. This reduction is particularly useful when pairing industrial or laboratory cameras with smaller sensors, as it prevents excessive cropping and preserves the observable area. The optical design therefore supports consistent image scale for documentation tasks and simplifies setup for comparative imaging across multiple samples. For clarity: C‑Mount denotes the standard camera bayonet interface used on many scientific cameras. Positive mechanical fit and corrosion-resistant construction Designed for a 42 mm photoport, the adapter provides a secure mechanical interface with a range of Olympus stands and bodies, including common series used in professional settings. The body is made from anodised aluminium, which combines light weight with enhanced surface hardness and corrosion resistance, reducing the risk of mechanical wear during repeated mounting. Robust construction helps to maintain optical axis alignment, reducing artefacts and the need for frequent recalibration during daily use. Practical workflow benefits and application scope As a straightforward camera coupling solution, this adapter supports rapid integration into existing imaging chains for routine documentation, quality control and educational demonstrations. The unit facilitates reliable attachment of 1/2" C‑mount cameras and accommodates the stated 35 mm to 25.4 mm adaptation requirements where applicable, enabling use with a variety of camera formats. For detailed application matching or confirmation of compatibility with specific camera models and objectives, technical advice is available at info@metav-werkzeuge.com or by telephone on +49 2822 7131930; consultation ensures the chosen configuration meets measurement and imaging requirements. Contact Metav Werkzeuge to arrange purchase of the AE.9850-O adapter or to request application advice—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: AE.9850-O Product type: Adapter Brand: Euromex Numbers / Core technical data Magnification: 0.50x Photoport diameter: 42 mm Camera mount: 1/2" C‑Mount C‑Mount adaptation: 35 mm to 25.4 mm Special features Anodised aluminium Compatible with Olympus CX, CX2, BX, BX2, IX, MX, GX, SZX, STM For 35 mm to 25.4 mm C‑Mount cameras FAQ What magnification change does this adapter provide? The adapter provides a 0.50x optical reduction, which increases the field of view on standard C‑mount sensors and reduces effective microscope magnification for wider scene capture. Which microscopes are compatible with this adapter? Compatibility is stated for a range of Olympus models; the adapter fits microscope photoports with a 42 mm interface and is compatible with the listed CX, CX2, BX, BX2, IX, MX, GX, SZX and STM series. Which cameras can be used with the adapter? The adapter is made for 1/2" C‑mount cameras and supports the specified C‑mount adaptations for cameras that require 35 mm to 25.4 mm interfacing. What material is the adapter made from and why does it matter? The housing is anodised aluminium, chosen for its combination of light weight, surface hardness and corrosion resistance, which helps maintain alignment and longevity in workshop and laboratory environments. Is the adapter suitable for imaging documentation and routine quality control? Yes — the adapter is intended for imaging workflows where a reliable mechanical and optical coupling to Olympus microscopes is required, supporting consistent documentation and inspection tasks. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
42mm 0.63x C-Mount Adapter for Olympus Microscopes Anodised Aluminium - Euromex
High-precision optical adaptation with 0.63× reduction for a wider image circle and reliable mechanical fit to Olympus 42 mm photoports. Robust anodised aluminium construction ensures long service life and stable alignment. Order the AE.9863‑O directly via Metav Werkzeuge or ask our consultants for integration advice. AE.9863-O 0.63× C‑Mount Adapter for Olympus microscopes — anodised aluminium, 42 mm photoport An AE.9863‑O C‑mount adapter designed to link 2/3" C‑mount cameras to Olympus microscopes with a 42 mm photoport for consistent imaging and simplified camera integration. 0.63× optical reduction for wider field Fits 42 mm Olympus microscope photoport Compatible with 2/3" C‑mount cameras Anodised aluminium, corrosion resistant Optimised imaging scale for broader field capture The adapter provides a reliable 0.63× reduction, which increases the usable field of view on cameras with smaller sensors while maintaining image quality. By adapting the optical path to C‑mount cameras with a 2/3" sensor, the interface reduces the need for additional optics and preserves the microscope’s imaging characteristics. This technical approach improves throughput in documentation and inspection tasks by delivering larger image coverage per frame, which is particularly useful in routine laboratory imaging and metrology applications. Seamless Olympus integration for predictable setup Designed specifically for Olympus microscopes with a 42 mm photoport, the adapter ensures mechanical and optical compatibility with a broad range of models, including common series used in industry and education. The C‑mount interface aligns standard camera threads and flanges, enabling direct attachment of industrial cameras without custom modification. This reduces setup time and risk of misalignment during camera swaps, supporting a stable imaging chain that is easy to reproduce across multiple workstations. Durable construction for consistent alignment and low maintenance Constructed from anodised aluminium, the adapter resists corrosion and maintains a stable fit under regular laboratory conditions. The robust material choice supports repeated camera mounting and demounting while keeping optical alignment within tight tolerances. For precision tasks and long-term installations, the sturdy build minimises drift and contributes to consistent measurement or inspection results, which helps maintain confidence in daily workflows. Contact Metav Werkzeuge for tailored advice on camera compatibility and integration of the AE.9863‑O adapter — our Emmerich team will support selection and delivery. Technical Data Article number: AE.9863-O Product type: Adapter Brand: Euromex Facts Magnification: 0.63× Photoport diameter: 42 mm Sensor compatibility: 2/3" cameras Mount standard: C‑mount Special features Compatibility: Olympus CX, CX2, BX, BX2, IX, MX, GX, SZX, STM Material: anodised aluminium Designed for 35 mm to 25.4 mm C‑mount transition Robust mechanical fit for repeatable alignment FAQ Which cameras are compatible with this adapter? The adapter accepts 2/3" C‑mount cameras, making it suitable for a wide range of industrial and scientific cameras that use the C‑mount interface. Will the adapter fit my Olympus microscope with a 42 mm photoport? Yes; the AE.9863‑O is specifically designed for Olympus microscopes featuring a 42 mm photoport, providing a secure and precise mechanical connection. Does the material resist laboratory wear and corrosion? The adapter is made from anodised aluminium, chosen for durability and resistance to corrosion under typical laboratory conditions. Can this adapter change the effective magnification of my imaging system? Yes; by providing a 0.63× optical reduction, the adapter increases the effective field of view on cameras with smaller sensors while preserving optical integrity. Is any additional optical component required to use a C‑mount camera? In most cases no additional optics are required when using a compatible C‑mount camera and a 42 mm photoport; the adapter is intended to provide direct mechanical and optical coupling. Manufacturer/Responsible: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Netherlands, info@euromex.com
42mm 1.0x C-Mount Adapter for Olympus Microscopes, Anodised Aluminium - Euromex
Take advantage of a precision-engineered C‑Mount adapter that aligns Olympus photoports with 1‑inch cameras while offering a durable, anodised aluminium body for stable imaging; order the adapter via Metav Werkzeuge or consult our specialists for integration advice. AE.9810-O — C‑Mount adapter for Olympus microscopes with 42 mm photoport, 1‑inch C‑Mount AE.9810-O is a precision adapter designed to connect Olympus microscopes featuring a 42 mm photoport to 1‑inch C‑Mount cameras for reliable microscopy imaging. Olympus 42 mm photoport compatibility Fits 1-inch C‑Mount cameras Anodised aluminium for stable alignment Broad model fit: CX, BX, IX, MX, GX, SZX, STM Consistent alignment for reproducible imaging The adapter is engineered to preserve the optical axis between microscope and camera, ensuring consistent image position across sessions. A stable mechanical interface reduces the need for repeated recalibration, which supports efficient workflows in inspection and documentation tasks. The connection to the 42 mm photoport is designed to maintain concentricity, while the C‑Mount side provides the standard threading for most industrial cameras. This results in repeatable images that are easier to measure and compare. Durable construction that minimises drift and wear Constructed from anodised aluminium, the adapter offers a rigid yet lightweight solution that resists corrosion and surface wear during repeated mounting. The finish increases the hardness of the outer surface and helps to prevent micro‑movements that can degrade focus over long measurement sequences. Mechanical stability is especially important in metrology and routine imaging where even minute shifts affect traceability; the chosen material and finish contribute directly to longer-term reliability. Broad compatibility that simplifies system setup Compatibility with Olympus models such as CX, CX2, BX, BX2, IX, MX, GX, SZX and STM allows the adapter to be deployed across mixed installations, reducing the variety of accessories required. The interface accommodates the 1‑inch (25.4 mm) C‑Mount standard and, as indicated, supports formats associated with 35 mm and 25.4 mm adaptations, enabling the use of a wide range of cameras and optics. This flexibility shortens procurement cycles and streamlines camera selection for inspection, research and quality control environments. Straightforward installation and measurable benefits Mounting is carried out directly to the microscope’s photoport and the C‑Mount camera thread, so the adapter integrates with existing cabling and imaging setups without the need for further mechanical modification. By maintaining a secure coupling and controlled spacing, the adapter helps to preserve field flatness and reduces vignetting risks with typical microscope objectives. For laboratories and workshops seeking consistent documentation, the result is fewer retakes, clearer images for analysis and more efficient use of personnel time. The AE.9810-O is suitable where optical repeatability and mechanical stability are priorities. For precise camera integration on Olympus microscopes, request the Euromex AE.9810-O via Metav Werkzeuge for tailored advice and reliable delivery from Emmerich. Technical data Article number: AE.9810-O Product type: Adapter Brand: Euromex Facts Photoport diameter: 42 mm C‑Mount thread size: 1 inch (25.4 mm) Compatibility formats: 35 mm and 25.4 mm C‑Mount Special features Material: Anodised aluminium Compatible microscope models: CX, CX2, BX, BX2, IX, MX, GX, SZX, STM Application: Camera coupling for microscopy imaging FAQ What microscopes is this adapter compatible with? The adapter fits Olympus models listed in the technical data; the Euromex AE.9810-O adapter is made for microscopes such as CX, CX2, BX, BX2, IX, MX, GX, SZX and STM. Does the adapter accept standard C‑Mount cameras? Yes. The AE.9810-O provides a 1‑inch (25.4 mm) C‑Mount interface compatible with standard industrial cameras that use C‑Mount threading. How does the anodised aluminium body benefit long‑term use? Anodised aluminium gives the adapter surface hardness and corrosion resistance, which helps to maintain mechanical stability and reduce wear during repeated mounting and alignment tasks. Will the adapter affect optical alignment or image quality? The adapter is designed to preserve the optical axis and minimise mechanical drift; when correctly installed, the AE.9810-O supports consistent imaging and reduces the need for frequent recalibration. Can the adapter be used for both documentation and measurement tasks? Yes. By ensuring stable coupling between microscope and camera, the adapter supports reproducible imaging suitable for documentation, inspection and basic metrology workflows. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands, info@euromex.com
45 × 105 × 23 mm Handheld Spectroscope Adjustable Slit 0–1 mm, 60 mm Linear Dispersion C–F 7° - Euromex
Take advantage of the combination of adjustable slit control and clear dispersion characteristics for reliable, repeatable spectral comparison in the workshop or classroom; order via Metav Werkzeuge or request advice from our consultants for selection and delivery. Handheld Spectroscope SP.5155 — adjustable slit, comparison prism and mirror by Euromex The Handheld Spectroscope SP.5155 is a compact optical instrument designed for quick spectral comparison and basic laboratory analysis, combining an adjustable slit with a comparison prism and integrated mirror for direct visual reference. Adjustable slit 0–1 mm for precise resolution Linear dispersion 60 mm for clear spectral bands Angular dispersion C–F 7° for chromatic separation Compact 45 × 105 × 23 mm, lightweight 125 g Measurable optical performance for routine inspection The SP.5155 delivers measurable performance where reproducibility matters. With an adjustable slit (0–1 mm) the instrument allows a controlled trade-off between light intensity and spectral resolution, enabling users to emphasise either brightness or line separation depending on the task. The stated linear dispersion of 60 mm and angular dispersion C–F 7° quantify how widely the visible spectrum is spread across the viewing scale, which facilitates clearer identification of emission or absorption lines without extensive calibration. These technical parameters form a reliable basis for comparing samples under consistent conditions, supporting routine material checks and educational demonstrations with quantifiable results. Practical design that supports field and classroom use Designed for portability, the unit’s compact dimensions (45 × 105 × 23 mm) and lightweight construction (approx. 125 g) make it straightforward to carry between stations or bench-top setups. The integrated comparison prism and mirror permit simultaneous viewing of a reference spectrum alongside the sample, reducing the need for additional optical accessories and speeding up comparative analysis. The casing and optical alignment encourage quick set-up and low-maintenance operation, which benefits workshops and teaching labs that require dependable instruments that are simple to handle and store. Clear results and straightforward interpretation for non-specialists Interpretation is simplified by the device’s direct visual output: adjusting the slit alters band sharpness, while the dispersion values indicate expected separation of key spectral features, so even operators with limited spectroscopy experience can obtain meaningful observations. The prism-based comparison method assists in recognising characteristic lines without relying on digital processing. For more technical workflows, the instrument functions as a fast pre-screening tool ahead of more sophisticated spectrometers, reducing analytical throughput time and focusing subsequent measurements where they matter most. Contact Metav Werkzeuge for tailored advice on integrating the SP.5155 into existing quality routines or for assistance with ordering and delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SP.5155 Product type: Spectroscope Label: Handspektroskop mit einstellbarem Spalt, Vergleichsprisma und Spiegel Manufacturer: Euromex Facts Dimensions: 45 × 105 × 23 mm (H × L × T) Weight: 0.125 kg Slit: adjustable, 0–1 mm Linear dispersion: 60 mm Angular dispersion: C–F 7° Special features Comparison prism Mirror for reference viewing Handheld / portable format FAQ What range does the adjustable slit cover and why is it useful? The adjustable slit on the Handheld Spectroscope SP.5155 ranges from 0 to 1 mm; narrowing the slit increases spectral resolution, while widening it improves brightness for faint sources. How do the dispersion values affect what is seen through the instrument? Linear dispersion of 60 mm and angular dispersion of C–F 7° determine how far spectral lines are separated in the viewing plane, so the specified figures indicate the instrument’s capacity to distinguish adjacent wavelengths. Is the spectroscope suitable for classroom demonstrations? Yes, the portable format and integrated comparison prism make the instrument well suited for educational use, allowing quick side-by-side observation of sample and reference spectra. Can this unit replace a laboratory spectrometer for material identification? The SP.5155 is best used as a comparative and screening tool; it provides immediate visual cues but does not replace high-resolution laboratory spectrometers for detailed quantitative analysis. Who is responsible for this product and where is it based? The spectroscope is supplied by Euromex and is distributed via Metav Werkzeuge for delivery and advice in Europe. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
45mm Blue Filter for iScope Lamp Housing - Euromex
Take advantage of a compact, purpose-built blue filter that fits the iScope lamp housing and helps to refine illumination for clearer observations. The combination of a precise 45 mm diameter, straightforward mounting and genuine Euromex quality ensures reliable integration into existing illumination setups. Order the accessory directly via Metav Werkzeuge or consult the team for compatibility details. Blue Filter 45 mm for iScope lamp housing — Euromex filter / polarisation accessory The Blue Filter 45 mm for iScope lamp housing is a dedicated illumination accessory designed to alter light characteristics in iScope lamp housings, supporting improved colour rendition and visual contrast in microscopy applications. 45 mm diameter for standard lamp housings Blue tint to refine illumination colour Compatible with iScope lamp housing Clearer observation through refined illumination A targeted change in light quality can make a measurable difference in visual inspection. The blue filter modifies the lamp output to produce a cooler tonal range, which often enhances perceived contrast and improves the visibility of fine details under transmitted or reflected light. With a nominal 45 mm diameter, the accessory aligns with common lamp housings used on the iScope series, enabling consistent optical behaviour across sessions. This results in more reproducible observations and a reduction in visual fatigue during repeated inspections. Simple integration with iScope lamp housings Designed for direct fitting to the iScope lamp housing, the filter functions as a compact, low-maintenance accessory that requires no electrical or optical recalibration of the light source. The geometry and sizing focus on mechanical compatibility, making the changeover straightforward in routine workflows. As an illumination accessory from Euromex, it supports existing instrumentation without altering the core optical path, preserving calibration while delivering the targeted colour adjustment. Practical advantages for workshop and laboratory use A small, robust filter can deliver big benefits in everyday tasks: enhanced colour balance aids material contrast assessment and sample differentiation, while the modest form factor keeps storage and replacement simple. For procurement and stocking, the part represents a low-complexity option to upgrade lighting characteristics across multiple microscopes. Combined with Metav’s quality assurance and supply chain reliability, the accessory contributes to steady operational performance in both technical workbenches and controlled laboratory environments. For precise compatibility checks and to secure genuine Euromex parts, contact Metav Werkzeuge for ordering and technical clarification via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: IS.9700 Label: Blau Filter 45 mm für Lampenhaus von iScope Product type: Filter / polarisation accessory Model series: iScope Manufacturer: Euromex UID: IS.9700 Data Diameter: 45 mm Special features Colour: blue Compatibility: for iScope lamp housing Series: iScope Accessory type: filter / polarisation accessory FAQ What does the blue filter change in the illumination? The blue filter shifts the lamp’s emitted light toward a cooler spectrum, improving perceived contrast and supporting clearer detail recognition when used with the iScope lamp housing. Is this filter compatible with all iScope lamp housings? The filter is specified for the iScope series and the Blue Filter 45 mm for iScope lamp housing is produced to match standard 45 mm lamp apertures; confirm exact lamp-housing variants if unusual adapters are fitted. How is the filter mounted and removed? Mounting is mechanical and intended for direct insertion into the dedicated aperture of the iScope lamp housing; the design avoids the need for tools or electrical changes to the light source. Can the filter be used with other microscope brands? Compatibility depends on the lamp housing diameter and mounting arrangement; the filter’s 45 mm dimension and form are typical, but physical fit should be checked against any non-iScope lamp housing prior to use. Does the filter require special cleaning or maintenance? Routine cleaning with a lint-free cloth and appropriate optical cleaning fluid is recommended; handle the filter by its rim to avoid smudging the optical surface. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com
See microstructure clearly for decisive quality control
A metallographic microscope (also referred to as a metallurgical microscope or inspection microscope) is an indispensable optical precision instrument in metallography. It renders the microstructure of metals and alloys visible at high magnification and forms the essential link between physical sample preparation and materials‑science assessment.
How the system works in the lab
Metals are opaque to transmitted light, so inspection is performed using reflected‑light techniques. The setup comprises an illumination system that directs light through a beam splitter onto the prepared surface, a high‑quality objective that provides the primary magnification and resolution, and a tube with an eyepiece for visual inspection. Image quality is governed primarily by the objective’s numerical aperture, which determines the resolving power for fine structural details. Integration with a digital camera and specialised evaluation software enables accurate imaging, documentation and norm‑compliant measurement of grain size, phase fractions and microdefects.
Practical benefits for production and quality assurance
In industrial quality control the microscope provides measurable outcomes that reduce risk and save time:
- improved detection of inclusions, pores and micro‑cracks, lowering the chance of in‑service failure
- reproducible grain‑size and phase analysis (ferrite, pearlite, martensite) through calibrated imaging and software tools
- faster throughput in inspection routines, reducing sample turnaround and non‑productive downtime
- enhanced traceability by saving images and measurement reports to support audits and batch acceptance
Why Metav is the pragmatic partner for microscopes
Metav combines decades of metrology expertise with a broad range of inspection solutions, acting as a quality filter for the european market from its base in Emmerich. With over 48,000 customers and more than 250,000 products, Metav offers a single, reliable source for microscopes, camera systems and evaluation software, ensuring consistent supply and professional advice for industry and workshops.
FAQ
Which inspection tasks are best suited to a metallographic microscope?
A metallographic microscope is ideal for analysing grain size, identifying microstructural phases such as ferrite, pearlite and martensite, and detecting microscopic defects like inclusions, pores or cracks that may affect mechanical integrity.
How does numerical aperture affect image quality?
The objective’s numerical aperture directly influences resolution and contrast; higher numerical aperture allows the microscope to resolve finer features in the sample microstructure, which is critical for accurate phase identification and defect sizing.
Can I connect a camera and perform automated measurements?
Yes. Modern metallographic microscopes can be paired with a digital camera and evaluation software to capture images, perform calibrated measurements and generate reproducible, norm‑compliant reports for documentation.
What should I consider when choosing objectives for metallurgical work?
Select objectives with appropriate magnification and high numerical aperture, compatible with reflected‑light illumination and the intended measurement standards; quality optics minimise artefacts and improve repeatability of results.
Does Metav supply complete inspection solutions for workshops?
Metav supplies microscopes, camera systems and software as part of a comprehensive product range, backed by decades of expertise and a commitment to reliable delivery from Emmerich.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com