High‑precision microscopes for metallographic inspection
A metallographic microscope is a specialised optical instrument designed to reveal the microstructure of metals and alloys, enabling precise analysis of grain size and identification of phases such as ferrite, pearlite and martensite while detecting microscopic defects like inclusions, pores and cracks. Used in industrial quality assurance, these microscopes combine a controlled reflected‑light illumination system, high‑quality objectives with critical numerical aperture and a tube and eyepiece for observation to ensure reliable resolution of fine structural details. Integrated digital camera systems and evaluation software allow norm‑compliant measurement, documentation and reproducible assessment, making them indispensable for material characterisation and process validation.
(For ZE.1624, ZE.1654, ZE.1626) AE.5252 Fuses For ST.1740 Stand Pack Of 10 - Euromex
Take advantage of a precise spare-parts solution that preserves tripod stability and simplifies maintenance: the AE.5252 safety fasteners deliver reliable compatibility with ZE.1624, ZE.1654 and ZE.1626 tripod mounts and ensure fast replacement when components wear. Request supply and expert advice via Metav Werkzeuge for seamless restocking and workshop continuity. ST.1740 – AE.5252 safety fasteners for ST.1740 tripod (Euromex) An ST.1740 accessory designed to secure compatible tripod assemblies in laboratory and workshop environments Compatible with ZE.1624/ZE.1654/ZE.1626 Includes AE.5252 safety fasteners Accessory for ST.1740 tripod Consistent compatibility for stable assemblies The primary benefit of these AE.5252 fasteners is their precise compatibility with a defined range of tripod mounts, reducing uncertainty at procurement. Engineered to match the mechanical interfaces of the associated tripod heads, the components restore or maintain axial and radial fixture security without the need for modification. This predictable fit lowers the risk of misalignment during instrument setup and supports continuous operation in both routine and high-use environments. Quick maintenance to reduce workshop downtime Spare fasteners simplify routine servicing and replacement cycles, delivering a measurable reduction in equipment downtime. When a retaining element shows wear, replacing it with an approved spare avoids prolonged disassembly and preserves alignment tolerances. The role of these safety fastenings is to keep optical or measurement equipment firmly seated on its support, so prompt replacement contributes directly to operational reliability and process repeatability. Traceable sourcing and practical inventory management Sourcing original parts under an established part code like AE.5252 supports traceability and quality assurance across maintenance records. Procuring components from a trusted supplier helps maintain a consistent stock level for critical fixtures; this is particularly important where repeatability of setups is essential. As a recognised supplier to industry and trade, Metav combines broad availability with transparent logistics from Emmerich, supporting predictable replenishment and reduced administrative overhead. Contact Metav Werkzeuge in Emmerich for tailored supply and compatibility confirmation: info@metav-werkzeuge.com | +49 2822 7131930 — reliable spare parts and consultation for workshop continuity Technical Data Article number: ST.1740 UID: ST.1740 Label: (für ZE.1624, ZE.1654, ZE.1626) AE.5252 Sicherungen für ST.1740 Stativ. je 10 Stück Manufacturer: Euromex Facts Product type: Zubehör / Komponente Cross-selling SKUs: AE.5252;ZE.1624;ZE.1626;ZE.1654 Special features Compatible with ZE.1624 Compatible with ZE.1654 Compatible with ZE.1626 Component code AE.5252 Intended for ST.1740 tripod assemblies FAQ What is included in the package? The label indicates AE.5252 safety fasteners supplied for the ST.1740 tripod, provided in sets of 10 as noted in the product description. Which tripod heads are these fasteners compatible with? The fasteners are matched to ZE.1624, ZE.1654 and ZE.1626 interfaces and are intended for use with the ST.1740 assembly from Euromex. How do these components affect instrument stability? Replacing worn or missing AE.5252 fasteners restores the designed mechanical seating for the tripod head, improving alignment stability and reducing the likelihood of slippage during measurements or observations. Can these parts be kept as workshop spares for scheduled maintenance? Yes, stocking the AE.5252 fasteners for the ST.1740 tripod is a practical inventory measure to ensure prompt maintenance and minimise downtime. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Netherlands, info@euromex.com
(für ZE.1624, ZE.1654, ZE.1626) AE.5252 Sicherungen für ST.1740 Stativ, je 10 Stück - Euromex
AE.5252 Sicherungen für ST.1740 Stativ – Zubehör / Komponente AE.5252 Sicherungen entfernen Unsicherheit bei Ersatzteilbedarf, eignen sich als robuste Austauschkomponenten für Werkstatt und Labor Kompatibel mit ST.1740 Stativ und weiteren Modellen Ersatzteile für schnelle Wartung und Reparatur Einfache Montage ohne spezielles Werkzeug Austauschbare Sicherungen für hohe Betriebssicherheit Maximale Verfügbarkeit durch standardisierte Ersatzteile Robuste Sicherungen sind ein wichtiger Beitrag zur Betriebssicherheit von Stativsystemen. Dieses Sortiment wurde als Austauschkomponente konzipiert, um Ausfallzeiten bei Mikroskopie- und Messaufbauten zu reduzieren. Durch die standardisierte Bauweise lässt sich ein defektes Element schnell tauschen, sodass Prüfablauf und Produktionsfluss erhalten bleiben. Der Nutzen zeigt sich vor allem in reduzierten Stillstandszeiten und geringeren Folgekosten durch schnelle Reparatur. Praxisgerechte Handhabung spart Wartungszeit In Werkstatt und Labor kommt es auf einfache, sichere Montage an. Die gelieferten Sicherungen sind so ausgelegt, dass sie ohne aufwendige Demontage getauscht werden können. Dies erleichtert regelmäßige Instandhaltung und reduziert den Schulungsaufwand für Bedienpersonal. Ein weiterer Vorteil liegt in der klaren Austauschbarkeit: Ersatzteilverwaltung und Lagerhaltung werden einfacher, wenn Komponenten modular und kompatibel gestaltet sind. Einsatzbereiche und Zielgruppe Diese Austauschkomponenten richten sich an Techniker, Serviceteams und Laborpersonal, das regelmäßig an Stativaufbauten arbeitet. Besonders in Anwendungsszenarien mit häufigem Aufbau und Abbau wie Messreihen oder wechselnder Versuchsanordnung zahlt sich die unkomplizierte Ersatzteilstrategie aus. Kleine Reparaturen vor Ort verhindern lange Versandwege und tragen zu einem effizienten Arbeitsalltag bei. Qualitätssicherung, Beratung und Logistik Metav steht für Demokratisierung der Präzision und unterstützt mit einem breiten Sortiment und lokaler Verfügbarkeit. Bei Bedarf an Ergänzungsdaten oder Unterstützung bei der Auswahl hilft der Kundendienst gern weiter. Die Kombination aus standardisierten Ersatzteilen und verlässlicher Beratung sorgt dafür, dass Servicezyklen transparent bleiben und Werkstätten ihre Ressourcen besser planen können. Empfehlung: Für schnelle Instandhaltung empfiehlt sich der Einsatz der AE.5252 Sicherungen von Euromex; Bestell- und Beratungsanfragen per E-Mail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: ZE.1626 Marke: Euromex Bezeichnung: (für ZE.1624, ZE.1654, ZE.1626) AE.5252 Sicherungen für ST.1740 Stativ. Je 10 Stück Produktart: Zubehör / Komponente Fakten Besonderheiten Cross-Selling-SKUs: AE.1856;AE.1857;AE.1858;AE.1859;AE.5252;ST.1740;ZE.1624;ZE.1654 Kompatibel mit: ST.1740 Stativ Packungsinhalt: je 10 Stück FAQ Wie werden die AE.5252 Sicherungen montiert? Die AE.5252 Sicherungen von Euromex lassen sich ohne spezielles Werkzeug austauschen; konkrete Montagehinweise finden sich in der jeweiligen Stativdokumentation für das ST.1740 Stativ. Sind die Sicherungen mit anderen Stativmodellen kompatibel? Das Set AE.5252 wurde primär für das ST.1740 Stativ angegeben, die Cross-Selling-Informationen (AE.1856, AE.1857 etc.) geben Hinweise auf weiter kompatible Artikel und mögliche Ersatzteilkombinationen. Wird die Lieferung in einer praktischen Verpackung angeboten? Die Bezeichnung enthält den Hinweis auf den Packungsinhalt; für die AE.5252 Sicherungen sind die Komponenten als Satz verpackt, dadurch sind die Lagerhaltung und der Transport im Servicefall vereinfacht. Für wen sind diese Ersatzteile besonders geeignet? Techniker und Serviceteams in Labor, Werkstatt und Fachhandel profitieren von den AE.5252 Sicherungen, weil sie Wartungsaufwand und Stillstandzeiten reduzieren. Wie erhalte ich weitere technische Details oder Beratung? Für weiterführende technische Daten und Beratung zur Kompatibilität mit dem ST.1740 Stativ steht der Vertrieb von Metav zur Verfügung; Anfragen können an info@metav-werkzeuge.com gerichtet werden. Hersteller: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Nederland; info@euromex.com
+ Ist.DIGI Add Accessory Digital Adapter, Compact - Euromex
Take advantage of Euromex manufacturing quality, clear identification via SKU IS.1152-Pli and the compact role as an accessory/component to secure consistent system integration; procure directly through Metav Werkzeuge or request specification guidance from our consultants. + ist.DIGI -ADD — Accessory / Component, SKU IS.1152-Pli The + ist.DIGI -ADD is presented as an accessory / component intended to support equipment integration and orderly inventory management in technical workshops and service operations. Accessory / Component for equipment integration Euromex manufacture and identification SKU IS.1152-Pli for clear ordering reference Faster integration with clear identification and supply reliability As an accessory-class component, the item provides a straightforward way to keep systems organised and maintain production continuity. Its role as a dedicated component reduces ambiguity in parts lists and spare-part management, supporting compatibility checks and swift replacement planning. The clear SKU reference IS.1152-Pli simplifies procurement and stock control, while the association with Euromex signals a focus on component-level reliability rather than speculative feature claims. Quality assurance and predictable availability for workshop workflows Choosing components that are identifiable and traceable improves operational planning and reduces downtime risk. The accessory benefits from factory-level production oversight and is intended to fit into established supply chains; this contributes to measurable gains in uptime and consistent maintenance scheduling. Metav’s presence in Emmerich acts as a regional quality filter and logistics hub, reinforcing precision in delivery and dependable availability for industry and trade partners. Clear ordering data and specification guidance to aid decision-making The product is catalogued under SKU IS.1152-Pli, enabling precise ordering and inventory tracking. Technical details beyond the basic product classification are available via the distributor’s resources; where additional specifications or compatibility lists are required, Metav provides documentation and procurement advice. For practical planning, note the component status and plan integration steps accordingly, ensuring correct part identification within equipment bills of materials. Contact Metav Werkzeuge for tailored procurement advice and reliable supply of the Euromex + ist.DIGI -ADD (SKU IS.1152-Pli) from Emmerich: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: IS.1152-Pli Name: + ist.DIGI -ADD Product type: Accessory / Component Manufacturer: Euromex Facts SKU / UID: IS.1152-Pli Label: + ist.DIGI -ADD Special features Product category: Accessory / Component Brand: Euromex FAQ What is the intended role of the + ist.DIGI -ADD? The + ist.DIGI -ADD is supplied as an accessory/component intended to serve as a designated part for equipment integration and orderly spare-part management. How should the product be identified when ordering? Specify the SKU IS.1152-Pli and the product name + ist.DIGI -ADD to ensure unambiguous procurement and correct stock allocation. Does the component come with detailed technical specifications? The basic classification is provided with the listing; detailed technical specifications are available through the distributor’s product documentation and ordering channels. Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
0,7x... 4,5x SLX-4 Binocular stereozoom microscope
0,7x... 4,5x SLX-4 Binocular stereozoom microscope
0,7x...4,5x SLX-2 Cordless binocular stereozoom
0,7x...4,5x SLX-2 Cordless binocular stereozoom
0,7x...4,5x SLX-3 Cordless trinocular stereozoom microscope
0,7x...4,5x SLX-3 Cordless trinocular stereozoom microscope
0,7x...4,5x SLX-5 Trinocular stereozoom microscope
0,7x...4,5x SLX-5 Trinocular stereozoom microscope
0,7x–4,5x Stereozoom Kopf mit 45° geneigten Tuben, SWF 10x/23 Okulare - Euromex
Binokular 0.7x bis 4.5x Z-series Stereozoomkopf Mikroskopkopf Der Binokular 0.7x bis 4.5x Z-series Stereozoomkopf ermöglicht stufenlose Vergrößerung und ergonomisches Sehen für Inspektion, Montage und Ausbildung. Binokularer Stereozoombereich 0,7–4,5× Fest geneigte Tuben im 45°-Winkel SWF 10×/23 Weitfeldokulare integriert Kompatibel mit Z-series Zubehör (AE.1856; AE.1857; AE.1858; AE.1859) Präzise Optik für detailgenaue Untersuchung Der Stereozoomkopf kombiniert einen breiten Zoombereich mit klarer Stereowiedergabe, sodass feine Strukturen leichter erkannt werden. Die integrierten SWF 10×/23 Okulare liefern ein großes Gesichtsfeld, das das Auffinden von Prüfstellen beschleunigt. Diese optische Auslegung reduziert Umrüstzeiten und steigert die Effizienz bei wiederkehrenden Inspektionsaufgaben. Der Mikroskopkopf ist auf dauerhafte Präzision ausgelegt und unterstützt anspruchsvolle Sichtkontrollen. Ergonomie für lange Prüfzyklen Die fest um 45° geneigten Tuben sorgen für eine natürliche Kopfhaltung und verringern Ermüdung bei langen Arbeitszyklen. Die binokulare Konstruktion erlaubt entspanntes Arbeiten ohne ständiges Wechseln der Blickrichtung, was insbesondere bei Serienprüfungen und Montagearbeiten die Produktivität erhöht. Robuste mechanische Anschlüsse gewährleisten gleichbleibende Ausrichtung und hohe Wiederholgenauigkeit bei wiederholten Messungen. Einsatz in Werkstatt, Labor und Lehre Der Stereozoomkopf eignet sich für Qualitätskontrolle, Montage, Forschung und Ausbildung. Anwender aus Werkstatt und Labor profitieren von schneller Sichtanalyse und guter Tiefenwahrnehmung, während Lehrende die klare Darstellung komplexer Strukturen für Demonstrationen schätzen. Durch die Kombination aus einfacher Handhabung und präziser Optik erfüllt das Produkt die Anforderungen unterschiedlicher Anwendergruppen. Modulare Bauweise und kompatibles Zubehör Der Kopf ist Teil der Z-series und lässt sich mit gängigen Adaptern und Zubehör koppeln. Passende Artikel sind unter den SKUs AE.1856; AE.1857; AE.1858; AE.1859; ST.1740; ZE.1626 verfügbar, wodurch individuelle Systemkonfigurationen möglich sind. Die modulare Struktur vereinfacht Nachrüstungen und erlaubt eine kosteneffiziente Anpassung an wechselnde Aufgaben. Empfehlung: Den Z-series Stereozoomkopf von Euromex direkt über Metav Werkzeuge beziehen; bei Bedarf technische Beratung per E-Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 anfordern_ Technische Daten Artikelnummer: ZE.1624 Marke: Euromex Modellserie: Z-series Produkttyp: Mikroskopkopf Bezeichnung: Binokular 0.7x bis 4.5x Z-Serie Stereozoomkopf mit fest um 45° geneigten Tuben mit SWF 10x/23 Okularen Daten (keine numerischen Zusatzwerte in den Rohdaten vorhanden) Besonderheiten Binokularer Stereozoomkopf Zoombereich: 0,7–4,5× Tuben: fest um 45° geneigt Okulare: SWF 10×/23 (Weitfeld, 10× Vergrößerung, 23 mm Feld) Kompatibilität: Z-series Zubehör (AE.1856; AE.1857; AE.1858; AE.1859; ST.1740; ZE.1626) FAQ Welche Vergrößerungsstufen deckt der Stereozoomkopf ab? Der Binokular 0.7x bis 4.5x Z-series Stereozoomkopf bietet einen stufenlosen Zoombereich von 0,7× bis 4,5× und kombiniert damit Flexibilität für Grob- und Feinsichtaufgaben. Sind die Okulare für weites Sichtfeld ausgelegt? Ja, die SWF 10×/23 Okulare des Z-series Stereozoomkopfs sind Weitfeldokulare, die ein großes Gesichtsfeld und komfortables Arbeiten ermöglichen. Für welche Anwendungen ist der Mikroskopkopf besonders geeignet? Der Mikroskopkopf eignet sich besonders für Qualitätskontrolle, Montageinspektion, Laborarbeiten und Unterrichtsdemonstrationen, wo stereoskopische Tiefenwahrnehmung und ergonomisches Arbeiten gefordert sind. Lässt sich der Kopf mit weiterem Zubehör kombinieren? Der Z-series Stereozoomkopf ist modular aufgebaut und kompatibel mit den genannten Zubehörartikeln (AE.1856; AE.1857; AE.1858; AE.1859; ST.1740; ZE.1626) zur individuellen Systemerweiterung. Hersteller: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Nederland; info@euromex.com
0-10 Brix Hand Refractometer 0.1 Resolution - Euromex
Take advantage of a compact, handheld design together with a 0–10 °Brix measuring range and 0.1 °Brix resolution for reliable sugar concentration checks in production and quality control. Order the instrument directly via Metav Werkzeuge or contact our consultants for technical advice and availability. Euromex Hand Refractometer RF.6510 — Handheld refractometer, 0–10 °Brix Euromex Hand Refractometer RF.6510 offers straightforward, on-the-spot determination of sugar concentration in aqueous solutions, suitable for small-scale production, laboratories and quality inspections. Handheld design for field and lab use Measuring range 0–10 °Brix Resolution 0.1 °Brix for precise readings Suitable for sugar concentration checks Precise low-range measurements for process control The instrument provides a measuring range of 0–10 °Brix combined with a resolution of 0.1 °Brix, enabling dependable quantification of low-to-moderate sugar contents. This level of precision supports straightforward process control decisions where slight variations in concentration affect product quality. The optical scale and fine resolution make the device particularly useful for recipes, syrup monitoring and quality inspection where small differences in sweetness or soluble solids are relevant. Compact portability that speeds sampling routines A compact, handheld format allows rapid checks at-line or in the field without tying up bench space. The light-weight design supports fast sampling cycles and reduces the need to return samples to a central laboratory, thus shortening feedback loops during production. The portability of the instrument translates into time savings and more frequent measurement points, which in turn help maintain consistency in everyday production tasks. Clear interpretation of Brix values for non-specialists The refractometer reports results in °Brix, a well-established unit that equates to sugar content by mass in aqueous solutions. For users less familiar with the term, a higher °Brix value indicates a greater proportion of dissolved solids—commonly sugar—in the sample. This clarity aids operators in making rapid, rational decisions based on numeric thresholds rather than subjective judgement, supporting standardised quality checks across shifts. Robust fit into small laboratories and craft production Designed for routine use, the device integrates easily into small laboratory benches and craft-production workflows. Its simplicity reduces the learning curve for operators and allows frequent monitoring without specialised training. When combined with a consistent sampling routine and basic record-keeping, the instrument becomes a reliable element of a quality assurance chain, delivering repeatable readings that feed into production documentation. Contact Metav Werkzeuge for availability of the Euromex RF.6510 and to request technical guidance from the Emmerich team: info@metav-werkzeuge.com — +49 2822 7131930 Technical data Article number: RF.6510 Product: Refractometer Label: Hand Refractometer, 0-10 Brix, Sugar Concentration Manufacturer: Euromex Facts Measuring range: 0–10 °Brix Resolution / accuracy: 0.1 °Brix UID: RF.6510 Special features Handheld instrument Measurement of sugar concentration FAQ What range of concentrations can be measured with this refractometer? The Euromex Hand Refractometer RF.6510 measures sugar concentration within a 0–10 °Brix range, making it suitable for low-to-moderate soluble solids analyses. How precise are the readings from the instrument? Readings are given with a resolution of 0.1 °Brix, so the RF.6510 supports fine distinctions in sugar concentration required for routine quality control. Is the refractometer suitable for handheld field use? Yes. The compact, handheld design of the RF.6510 by Euromex is intended for rapid checks both at-line and in field situations where portability is required. Which types of samples are appropriate for measurement? Aqueous solutions containing dissolved solids—such as juices, syrups and process samples—are typical applications for determining sugar concentration with this refractometer. What basic care is recommended to keep measurements consistent? After each measurement, the prism surface should be wiped clean and dried to avoid residues that could affect subsequent readings; regular visual inspection helps maintain consistent performance of the RF.6510. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
0-100‰ / 0-10 Brix Hand Refractometer 1.00–1.07 RI Salinity And Sugar Concentration - Euromex
Take advantage of the combination of portable optical measurement, clear numeric scales and straightforward application for faster in-process checks and consistent quality decisions. Order the instrument directly via Metav Werkzeuge or ask the consultants for technical advice. Hand Refractometer RF.6610 — Portable refractometer for 0–10 °Brix and 1.00–1.07 RI (Euromex) The Hand Refractometer RF.6610 is a compact optical measuring device for rapid determination of salt content and sugar concentration in aqueous solutions, suited to routine checks in production and laboratory environments. Handheld portable refractometer design Measures 0–10 °Brix and 1.00–1.07 RI Range 0–100 ‰ for salinity readings Suitable for sugar and salt concentration tests Rapid, objective measurements for quality control The handheld instrument delivers immediate, numerically comparable readings, enabling quick decisions on-line or at the bench. By using refractive-index measurement and the familiar °Brix scale, the device converts an optical property of the sample into a direct indicator of sugar concentration or salinity, which supports standardised quality checks. This measurable output reduces guesswork and helps to document process stability without elaborate laboratory equipment. Clear scales for reliable interpretation The RF.6610 provides three complementary scales: 0–10 °Brix, 1.00–1.07 refractive index (RI) and 0–100 ‰ for salinity. °Brix expresses approximate grams of sucrose per 100 grams of solution and is widely used in food and beverage testing, while refractive index is a direct optical quantity useful for cross-checking and comparing different sample types. The permille (‰) salinity scale offers a straightforward way to assess salt content. Presenting results on these established scales improves comparability across shifts and suppliers and shortens evaluation times. Fits into production and laboratory workflows Thanks to its compact, handheld format, the device is suitable for spot checks along production lines, incoming‑goods inspection and quick laboratory verification. Readings on standardised scales facilitate process control and traceable record keeping, which contributes directly to operational efficiency. For teams that need fast pass/fail decisions or periodic verification of batches, the optical measurement principle provides repeatable, objective values that are easy to log and interpret. Basic care to preserve accuracy To maintain reliable readings, keep the optical surfaces free from residue and handle the instrument with care to avoid scratches on the measuring prism. Periodic checking against a reference fluid or standard solution ensures continued comparability of results. With routine attention to cleaning and correct sample application, the instrument supports long‑term, consistent performance in everyday use. Choose the Euromex RF.6610 for dependable portable refractometry and contact Metav Werkzeuge for tailored technical advice and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: RF.6610 Product type: Refractometer Brand: Euromex Measurement ranges: 0–100 ‰; 0–10 °Brix; RI 1.00–1.07 Application: Salt content and sugar concentration Core specifications 0–100 ‰ 0–10 °Brix Refractive index range 1.00–1.07 Applications and features Handheld operation Optical refractive‑index measurement Measures salinity and sugar concentration Suitable for routine checks in production and laboratory environments FAQ What measurement ranges does the device cover? The Euromex RF.6610 covers three scales: 0–100 ‰, 0–10 °Brix and refractive index 1.00–1.07, allowing assessment of salinity and sugar concentration from a single instrument. How does °Brix relate to sugar concentration? °Brix is an established scale that expresses the percentage by mass of sucrose in a solution; the RF.6610 reports on this scale so that sugar content can be interpreted directly and compared with standard specifications. Which sample types are suitable for testing with this refractometer? The RF.6610 is intended for aqueous solutions where refractive index and °Brix give meaningful information, for example brines, syrups and dilute fruit juices, providing quick comparative data for production and QC. Is regular calibration required for accurate readings? Periodic calibration checks are recommended to ensure consistent results; users typically verify the instrument against a reference fluid or standard solution to maintain measurement comparability for the RF.6610. How should the instrument be maintained to ensure longevity? Routine cleaning of the optical surfaces and careful handling to avoid scratches or contaminants will help preserve accuracy and extend service life for the Euromex RF.6610. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
0-20 Brix Hand Refractometer 0.1 Resolution - Euromex
Take advantage of a practical combination of portability and reliable measurement: the handheld design paired with a 0–20 Brix range and 0.1 Brix resolution enables fast, reproducible sugar readings for routine quality checks. Order the device directly via Metav Werkzeuge or request application advice from our consultants for an efficient integration into production or laboratory workflows. Hand Refractometer RF.6520 — Hand-held 0–20 Brix, 0.1 resolution by Euromex Hand Refractometer RF.6520 for quick determination of sugar concentration in liquids across food, beverage and field applications Hand-held refractometer for liquids Measurement range 0–20 Brix Resolution 0.1 Brix Quick visual sugar concentration reading Fast, reliable sugar checks with portable precision The Hand Refractometer RF.6520 delivers straightforward determination of sugar concentration on a compact, hand-held instrument. With a 0–20 Brix measurement span and a 0.1 Brix resolution, the device produces decisive numerical information for process control, harvest assessments and routine quality checks. The optical visual scale provides immediate readings without complex electronics, reducing downtime and simplifying operator training. The clear specification supports predictable sampling routines and consistent batch documentation. Practical benefits for production and quality control Designed for simple operation, this compact refractometer converts refractive index into actionable data for pressing decisions in food and beverage production. The moderate measurement range covers common sugar levels in syrups, juices and beverages while the 0.1-step precision enables differentiation between production lots. Readings are immediate and repeatable, assisting in faster adjustments on the line and fewer wasted batches. The instrument’s form factor makes it suitable for bench use or mobile checks at delivery and receiving points. Confidence, support and easy integration Metav’s distribution ensures dependable access and application guidance: the product arrives from a European quality filter with specialist support for integration into existing workflows. For users seeking additional technical detail or verification of suitability, a quick enquiry to Metav Werkzeuge provides clarifying data and practical advice. The combination of a portable optical device and a reliable supplier network helps to establish consistent measurement routines and build trust in everyday quality assurance. Contact Metav Werkzeuge for application guidance and to arrange purchase of the Euromex Hand Refractometer RF.6520 directly from our Emmerich team Technical data Article number: RF.6520 SKU: RF.6520 UID: RF.6520 Measured values Measurement range: 0–20 Brix Accuracy / resolution: 0.1 Brix Features Product type: Refractometer Label: Hand Refractometer, 0-20 Brix, Sugar concentration Manufacturer: Euromex FAQ How is sugar concentration displayed with this instrument? The Euromex Hand Refractometer RF.6520 shows sugar concentration directly on an optical scale calibrated in Brix, giving an immediate visual reading in the 0–20 Brix range. Is the accuracy sufficient for routine quality control? Yes, the stated 0.1 Brix resolution of the RF.6520 is suitable for standard process control and batch comparisons where small differences in sugar content must be detected. Can this refractometer be used outside the laboratory? The compact, hand-held design supports mobile checks in production areas, at receiving docks or in the field, enabling practical on-site measurement of sugar levels. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
0-25% Hand Refractometer 0.2% Accuracy, 0–40 Brix / 0–20 Baumé - Euromex
Compact handheld operation and clear triple-scale reading make routine checks rapid and dependable; the 0–40 °Brix / 0–25% vol. / 0–20 Baumé ranges together with an accuracy of 0.2 support consistent decision-making in production and quality control. Order the Euromex RF.6627 directly via Metav Werkzeuge or consult our advisors for tailored advice. Hand Refractometer RF.6627 — Handheld refractometer with 0–40 °Brix triple-scale (Euromex) Hand Refractometer RF.6627 for quick checks of sugar and alcohol concentrations across Brix, volume percent and Baumé scales Handheld, portable design for on-site readings Triple-scale: °Brix, % volume, Baumé High resolution with 0.2 accuracy Compact instrument for routine quality checks Fast, reliable concentration checks for process control The handheld unit delivers direct readings across three industry-relevant scales, enabling swift decisions on product batches and process adjustments. With visible scales for 0–40 °Brix, 0–25% vol. and 0–20 Baumé, the instrument provides a practical basis for routine quality control in food and beverage contexts. The specified accuracy of 0.2 allows for reproducible results that support traceable checks without the need for complex laboratory equipment, helping to maintain production consistency. Portable design that fits production and testing workflows Designed as a compact measuring instrument, the device is intended for use wherever quick verification is required: at the bench, in-process or at dispatch. The portable format reduces downtime by bringing measurement capability to the point of need and integrates easily into sampling routines. For small-scale producers, craft brewers and laboratory operations, the combination of multiple scales and a handheld form factor supports efficient sampling regimes while keeping handling straightforward. Clear scales and an explanation of what each reading means The °Brix scale indicates sugar concentration by mass, commonly used in fruit, juice and syrup quality assessments. The % volume scale corresponds to alcohol content estimates, useful for fermentation monitoring and beverage checks. Baumé offers an alternative density-based reference still used in several production contexts. Presenting all three scales on one instrument simplifies interpretation and reduces the need for separate devices, allowing staff to compare readings directly and choose the appropriate metric for their application. How this instrument supports quality assurance and routine control Using a single, calibrated handheld refractometer helps standardise spot checks and shortens feedback loops during production. Routine use of the instrument supports trend observation—detecting deviations early and enabling corrective actions. If further technical specifications or integration advice are required for quality management systems, detailed data and assistance are available from our team to ensure the instrument meets the documented requirements of the process. For reliable sugar and alcohol checks, contact Metav Werkzeuge to request technical advice and to order the Euromex RF.6627 directly from our Emmerich warehouse; email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised guidance Technical data Article number: RF.6627 Brand: Euromex Product type: Refractometer Label: Hand Refractometer 0–40 °Brix, 0–25% vol., 0–20 Baumé Data Measurement ranges: 0–40 °Brix Measurement ranges: 0–25% volume Measurement ranges: 0–20 Baumé Accuracy: 0.2 Special features Handheld design For sugar and alcohol concentration measurement SKU: RF.6627 FAQ What measurement scales are provided by this instrument? The Euromex RF.6627 handheld refractometer provides °Brix, % volume and Baumé scales for assessing sugar and alcohol-related concentrations. What accuracy can be expected from the readings? The RF.6627 is specified with an accuracy of 0.2, offering consistent resolution for routine quality control checks. Which applications suit this refractometer best? Typical applications include fruit and juice testing, syrup and sugar checks, fermentation monitoring in breweries and wineries, and general beverage quality control where quick concentration checks are required. Is the instrument suitable for on-site and field measurements? Yes, the RF.6627 is a handheld device designed for portable use and on-site verification within production and sampling routines. How should one interpret differences between °Brix and % volume readings? °Brix measures sugar content by mass, commonly used for product sweetness and concentration; % volume estimates alcohol content, relevant during and after fermentation. Baumé is a density-related scale that provides an alternate reference for specific process contexts. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
0-28% 0-45 Brix 1.33-1.41 R.I. Digital Hand Refractometer 0.1%/0.0003 R.I. Accuracy - Euromex
Take advantage of precise, repeatable readings for both salinity and sugar concentration thanks to a wide measurement span and fine resolution; the combination of robust measurement ranges and high accuracy supports consistent process control and quality assurance. Order the instrument directly via Metav Werkzeuge or consult our specialists for integration advice. Euromex RD.6728 Digital Hand Refractometer — 0–28% salinity, 0–45 °Brix, 1.33–1.41 R.I. Euromex RD.6728 is a compact digital hand refractometer engineered for rapid checks of salt and sugar concentration in liquids across production, laboratory and field environments. Digital readings for salinity and Brix Measurement range 0–28% salinity, 0–45 °Brix High precision: 0.1% / 0.1 °Brix / 0.0003 R.I. Handheld format for on-site checks Fast, reliable readings that support tighter process control This hand-held instrument delivers clear numeric output across three standard measures: salinity, Brix (sugar concentration) and refractive index. The specified measurement ranges of 0–28%, 0–45 °Brix and 1.33–1.41 R.I., combined with accuracies of 0.1%, 0.1 °Brix and 0.0003 R.I., enable operators to compare batches, confirm targets and detect deviations early. Such quantitative certainty reduces rework, shortens decision cycles and supports reproducible quality results in production and laboratory settings. Clear interpretation of Brix and refractive index for practical decisions The device reports Brix to indicate dissolved sugar content and refractive index for broader optical characterisation of a solution; both metrics are commonly used in food, beverage and laboratory testing. Where formulations or salinity levels determine product behaviour, the numerical readout allows straightforward pass/fail checks against specification limits. The short, unambiguous measurement output simplifies documentation and traceability, making data suitable for quality records or production logs without the need for conversion tables. Portable format to integrate with on-site workflows Designed for quick spot checks, the instrument’s handheld layout supports measurements at the production line, in the lab or beside storage tanks. Mobility reduces sampling time and removes the need to transport samples to a fixed bench instrument, which accelerates corrective action when process parameters drift. The compact design also minimises training requirements: operators familiar with standard refractometers will recognise the workflow and benefit from immediate digital clarity during routine quality control rounds. Typical applications and who benefits most This digital hand refractometer is suitable for food and beverage manufacturers, confectionery producers, breweries, aquaculture operations and laboratories that require regular checks of sugar concentration or salinity. Quality managers and production supervisors gain a practical instrument for spot verification, while technical staff appreciate the repeatability and numerical precision that ease process validation. For smaller workshops or mobile testing needs, the balance of portability and measurement fidelity makes it a pragmatic choice for everyday quality assurance. For a technical discussion about fitting the Euromex RD.6728 into an existing quality workflow or to compare alternative measurement instruments, contact Metav Werkzeuge for expert advice and local supply from Emmerich. Technical data SKU: RD.6728 Label: Digital Hand Refractometer, 0–28%, ±45 Brix, 1.33–1.41 R.I. for salt and sugar concentration Brand: Euromex Product type: Refractometer UID: RD.6728 Facts Measurement ranges: 0–28% ; 0–45 °Brix ; 1.33–1.41 R.I. Accuracy: 0.1% ; 0.1 °Brix ; 0.0003 R.I. Special features Digital numeric output for salinity, Brix and refractive index Handheld, portable form factor Suitable for production, laboratory and field checks Manufacturer: Euromex FAQ What measurements does the instrument provide? The Euromex RD.6728 digital hand refractometer reports salinity (percentage), Brix (°Brix) and refractive index (R.I.) within the stated ranges for quick evaluation of solution composition. How accurate are the readings from the RD.6728? Readings are specified with accuracies of 0.1% for salinity, 0.1 °Brix for sugar concentration and 0.0003 R.I. for refractive index, suitable for routine quality control and process monitoring. Is the instrument suitable for production line spot checks? Yes; the handheld format and direct digital output make the device well suited to on-site spot checks in production, filling and storage areas where rapid verification is required. Which sectors typically use this type of refractometer? Common users include food and beverage manufacturers, confectionery and bakery operations, breweries and aquaculture facilities, as well as testing laboratories conducting routine compositional checks. How should results be used in quality documentation? Numerical outputs from the Euromex RD.6728 can be recorded directly into batch logs or quality records as specified measurement points, allowing clear comparison against specification limits and traceability. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands, info@euromex.com
0-28% Refractometer Salinity And Sugar Concentration 0.2% Accuracy - Euromex
Take advantage of the combination of a 0–28% measuring range, precise 0.2% accuracy and a compact handheld format for fast quality checks in production and field inspections. Order the instrument directly via Metav Werkzeuge or consult our team for application advice. Hand Refractometer RF.6628 — handheld refractometer for 0–28% salt and sugar concentration | Euromex The Hand Refractometer RF.6628 is designed for rapid determination of salt and sugar concentrations in liquidsand for straightforward checks during production, lab sampling and on-site inspections. Measurement range 0–28% for salt and sugar High accuracy 0.2% for reliable readings Robust handheld design for field use Quick, maintenance-free optical measurement Precise measurement where it matters for production control The instrument delivers a clear numerical basis for concentration checks with a 0–28% measuring range and a stated 0.2% accuracy, making it suitable for routine quality assurance and process sampling. This level of precision supports repeatable decisions in product formulation and batch control, reducing rework and variances. By relying on a simple optical reading principle, the device provides an immediate indication of concentration, aiding consistent quality control without complex instrumentation. Portable checks that keep operations moving Designed as a handheld optical instrument, the refractometer enables quick verification at the point of need — on the production line, at the tanker or in the warehouse. The compact format removes the need for bench space and simplifies logistics for mobile teams; measurements are achieved by placing a few drops of sample on the prism and reading the scale. The absence of mains power or elaborate set-up reduces downtime and supports faster decision-making in continuous workflows, so checks become part of the normal production rhythm. Simple principle, straightforward results for salt and sugar applications Based on refractometry, the device translates the bending of light at the sample surface into a readable concentration value. This makes the instrument ideal for monitoring salt and sugar levels in liquid formulations, brines and process streams. Basic calibration with distilled water keeps results consistent; routine care is limited to cleaning the prism and avoiding scratches. The compact optical design means little maintenance is required, while the clear scale and loupe facilitate unambiguous readings even in non-laboratory environments. Integration into procurement and workshop supply with trusted distribution Sourcing through an experienced partner ensures reliable delivery and straightforward integration into existing tool inventories. Metav Werkzeuge combines an extensive product range and long-standing market presence with local stock management from Emmerich, acting as a practical quality gateway for European customers. The handheld refractometer fits workflows where fast, repeatable concentration checks are needed and benefits from Metav’s procurement reliability and broad accessory ecosystem for measurement tasks. Contact Metav Werkzeuge to discuss suitability for specific applications or to order the RF.6628 directly from their Emmerich hub: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data SKU: RF.6628 Item: Hand Refractometer RF.6628 Brand: Euromex Key measurements Measuring range: 0–28 % Accuracy: 0.2 Materials & features Product type: Refractometer Application: Salt and sugar concentration measurement Operation: Handheld optical instrument FAQ What does the 0–28% measuring range indicate? The range denotes the measurable concentration span for the instrument; the RF.6628 covers solutions from 0 up to 28 per cent, suitable for many salt and sugar applications. How precise are the readings from this refractometer? The RF.6628 is specified with an accuracy of 0.2%, which provides repeatable results for routine quality checks and process control. Is this instrument suitable for field use outside the laboratory? Yes, the handheld optical design is intended for mobile and on-site checks, allowing quick concentration verification without mains power. How are measurements performed with this type of refractometer? A small sample is placed on the prism; the optical scale is observed and read directly, translating light refraction into a concentration value for salt or sugar. Does the device require frequent calibration or maintenance? Maintenance is minimal: regular prism cleaning and occasional calibration with distilled water preserve reliable readings for long-term use. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
0-32 Brix Hand Refractometer 0.2 Precision, Portable - Euromex
Take advantage of fast, reliable on-site sugar checks with precise readings and compact handling for streamlined quality control. Combine the 0–32 Brix measurement range with ±0.2 Brix accuracy to secure consistent process monitoring; order or request advice via Metav Werkzeuge for swift support and supply. Hand refractometer RF.6532 — 0–32 Brix, ±0.2 Brix accuracy (Euromex) The Hand refractometer RF.6532 provides portable measurement of sugar concentration on the Brix scale for basic quality checks in food and beverage production. Handheld design for quick field checks Measurement range 0–32 Brix Accuracy ±0.2 Brix Suitable for sugar concentration testing Rapid, measurable control for production processes The RF.6532 is designed for straightforward, repeatable checks of sugar concentration where quick decisions matter. Its 0–32 Brix range covers typical applications in juices, syrups and other liquid formulations; the stated ±0.2 Brix accuracy allows objective comparison between batches and supports process control decisions. By converting a physical property into a numeric value on the Brix scale, the instrument supplies a verifiable quality parameter that can be logged and tracked to detect drift or variation in production. Portable format that reduces downtime and accelerates sampling A compact hand refractometer simplifies in-line sampling routines and removes the need to transport samples to a laboratory for routine checks. The portable format enables immediate results at the production line, which shortens feedback loops and helps maintain consistent product specifications. This practical approach to testing supports tighter operational cycles and fewer interruptions while preserving the traceability of measurements for quality records. Clear reading and Brix interpretation for non-specialists The Brix scale expresses dissolved solids as a percentage by mass; a higher Brix value typically indicates greater dissolved sugar content. The RF.6532 provides a direct reading on this scale, making interpretation accessible even for operators with minimal training. Reliable measurement precision of ±0.2 Brix reduces ambiguity in pass/fail checks and supports informed adjustments to recipes or process parameters without demanding advanced metrology expertise. Contact Metav Werkzeuge for tailored advice on implementing the RF.6532 in routine quality control and to arrange supply from our Emmerich hub — eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930 Technical data Article number: RF.6532 Product type: Refractometer Brand: Euromex Label: Hand refractometer, 0–32 Brix, sugar concentration Core data Measurement range: 0–32 Brix Accuracy: ±0.2 Brix Applications and features Portable, handheld operation For sugar concentration checks in liquids Quick on-site quality checks FAQ How is the Brix value read with this device? The RF.6532 displays a direct reading on the Brix scale; place a sample on the prism and read the value where the boundary line meets the scale to obtain the sugar concentration. Which liquids can be measured with this refractometer? The RF.6532 is intended for basic sugar concentration testing of aqueous liquids such as fruit juices, syrups and similar solutions where Brix is a relevant quality parameter. How accurate are readings from the RF.6532? The instrument provides readings with an accuracy of approximately ±0.2 Brix, suitable for routine process checks and comparative measurements across production batches. Is specialised training required to use the refractometer? No intensive metrology training is necessary; the RF.6532 offers a straightforward sampling and reading routine that can be performed by production staff after brief instruction. Can readings be used for formal quality documentation? Yes, readings from the RF.6532 can be recorded and used as part of internal quality control records to monitor trends and support corrective actions. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
0-360° Rotatable Slide Analyzer 0.1° Graduation, - Euromex
Benefit from precise polarisation control and repeatable angular indexing: the combination of full-range rotation and fine 0.1° graduations supports consistent microscopy measurements and simplified orientation analysis. Order the DX.9608-R directly via Metav Werkzeuge or ask our consultants for application advice. DX.9608-R Rotating Analyser Slide (0–360°, 0.1° Graduations) — Euromex Accessory The DX.9608-R is a rotating analyser slide designed for polarisation microscopy and fine angular orientation tasks in laboratory and inspection environments. *360° rotation with 0.1° graduations *Rotating analyser slide for microscopy applications *Accessory SKU DX.9608-R by Euromex Accurate angular indexing for reproducible polarisation measurements The DX.9608-R provides 0.1° graduation steps across a full 360° rotation, enabling exceptionally fine angular adjustments. This level of precision reduces operator-dependent variance and makes quantitative comparisons between samples straightforward. In practical terms, the fine indexing supports consistent alignment of polarisation directions and repeatable orientation measurements, which is particularly valuable for birefringent specimen analysis and materials characterisation. Improved workflow through simple rotation and clear readout A continuous 360° rotating mechanism simplifies the process of scanning sample orientations without the need to remount or reposition the specimen. The rotating analyser slide is configured for straightforward integration with polarising microscope setups, helping to streamline inspection routines. Clear 0.1° graduations permit quick visual confirmation of settings and accelerate routine checks, saving time during serial examinations and reducing measurement uncertainty. Designed for microscopy accessory compatibility and reliable handling As a dedicated analyser accessory, the rotating slide is intended to complement standard polarisation stages and illumination arrangements. The construction and indexing system focus on repeatability and stable adjustments under regular laboratory use. Supplied as an accessory/component, the unit supports controlled polarisation analysis in teaching, research and light-inspection tasks where small angular changes must be tracked precisely. Contact Metav Werkzeuge for tailored advice or to secure the DX.9608-R rotating analyser slide for immediate integration into the inspection bench; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: DX.9608-R Product: Rotating analyser slide (0–360°; 0.1° graduations) Manufacturer: Euromex Numerical data Rotation range: 0–360° Indexing resolution: 0.1° graduations Special features Rotating analyser for polarisation microscopy Accessory / Component Label translated from original: slide with rotatable analyser and 0.1° graduations FAQ How precise is the angular control on the analyser slide? The DX.9608-R features 0.1° graduations across a 360° rotation, allowing very fine adjustments for polarisation experiments. Can the rotating analyser be used on standard polarising microscope stages? Yes, the rotating analyser slide is designed as a microscopy accessory and is compatible with common polarising stage arrangements when mounted appropriately. How is repeatability ensured when recording orientations? The clear 0.1° indexing and continuous 360° rotation of the analyser slide help ensure repeatable positioning and reliable comparison between successive measurements. Is the analyser suitable for routine inspection and teaching labs? The rotating analyser slide is intended for laboratory use, including teaching and routine inspection, where controlled angular changes and reproducible settings are required. What is the exact product designation for ordering and reference? Refer to the SX SKU DX.9608-R and the description "rotating analyser slide (0–360°; 0.1° graduations)" when ordering or specifying the accessory. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands, info@euromex.com
0-45 Brix 1.33-1.41 R.I. Digital Hand Refractometer 0.1 Brix / 0.0003 R.I. Accuracy - Euromex
Take advantage of compact portability and laboratory-level accuracy to speed up routine quality checks. The combination of a broad measurement range and fine resolution ensures reliable sugar concentration readings for production sampling and in‑field verification. Order the device directly via Metav Werkzeuge or consult our specialists for tailored application advice. Euromex RD.6645 Digital Hand Refractometer — 0–45 Brix, 1.33–1.41 RI A Digital Hand Refractometer 0–45 Brix, 1.33–1.41 RI designed for fast, handheld determination of sugar concentration in liquids for laboratory and process control Compact handheld digital refractometer Measurement range 0–45 Brix / 1.33–1.41 RI High accuracy 0.1 Brix / 0.0003 RI Fast one‑button readings Precise concentration checks that support process control The instrument provides accurate quantitative measurement across a wide working span, enabling confident decisions in production and quality control. With a 0–45 Brix scale and corresponding 1.33–1.41 RI range, the device allows direct correlation between refractive index and sugar content, reducing the need for conversion tables. The stated resolutions — 0.1 Brix and 0.0003 RI — mean small changes in concentration are detectable, supporting consistent product quality and fewer rejected batches. Readings made understandable and reliable Built for straightforward use, the unit converts optical readings into standard concentration units automatically and displays results on a clear digital screen. Brix represents the mass percentage of sucrose in an aqueous solution and is widely used in food and beverage quality control; refractive index (RI) indicates how light is bent by a sample and is useful when temperature compensation or RI‑based comparison is required. The combination of both scales in one handheld instrument simplifies interpretation and reduces calculation errors during routine checks. Designed for swift checks in the lab and on site The handheld format and rapid one‑button operation make this device suitable for both bench work and field sampling, shortening inspection cycles and increasing throughput. Its compact digital handheld design supports mobility between production lines or sampling points while maintaining laboratory‑grade repeatability. Portable measurements mean faster corrective actions, so production downtime is minimised and process control is tighter. For specific application guidance or to order the Euromex RD.6645 through Metav Werkzeuge, contact our consultants in Emmerich for prompt delivery and expert support Technical data SKU: RD.6645 UID: RD.6645 Label: Digital Hand Refractometer 0-45 Brix, 1.33-1.41 R.I. für Zucker Konzentrationen Product type: Refractometer Manufacturer: Euromex Facts Measurement range: 0–45 Brix Refractive index range: 1.33–1.41 RI Accuracy (Brix): 0.1 Accuracy (RI): 0.0003 Special features Digital handheld design Rapid sugar concentration determination Suitable for laboratory and field checks FAQ What measurement ranges are covered by this refractometer? The Euromex RD.6645 covers 0–45 Brix and 1.33–1.41 RI, allowing direct determination of common sugar concentrations and corresponding refractive index values. How accurate are the readings from this device? The device offers an accuracy of 0.1 Brix for sugar measurements and 0.0003 RI for refractive index, providing the resolution needed for routine quality control with the Euromex handheld refractometer. Is the unit suitable for use outside the laboratory? Yes, the portable digital handheld design of the RD.6645 enables reliable measurements at production sites or in the field while maintaining laboratory‑level resolution. What does a Brix value indicate for product testing? A Brix value from the RD.6645 quantifies the mass percentage of dissolved sucrose in an aqueous sample, a standard metric for assessing sweetness and process consistency in food and beverage applications. Can the instrument report refractive index as well as Brix? The Euromex RD.6645 displays both Brix and RI values, allowing selection of the most appropriate parameter for documentation and process control. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
0-80 Brix Hand Refractometer 0.5% Accuracy - Euromex
Take advantage of a compact, reliable instrument that provides fast sugar concentration readings across a wide 0–80 Brix range with 0.5 Brix accuracy; the handheld design enables immediate on-site checks in production and lab settings. Order the hand refractometer directly via Metav Werkzeuge or ask our consultants for tailored advice. Hand Refractometer RF.6580 — Portable 0–80 Brix sugar tester (Euromex) A Hand Refractometer RF.6580 is for rapid measurement of sugar concentration in liquids, ideal for quality checks in food production, brewing and laboratory spot testing. 0–80 Brix measuring range 0.5 Brix accuracy Handheld for on-site sugar testing Dependable, measurable results for production control The instrument delivers precise readings across a broad 0–80 Brix span, ensuring consistent process control where sugar concentration matters. The specified 0.5 Brix accuracy offers a reliable quantitative basis for decisions such as batch adjustments or quality validation. Using a refractometer reduces guesswork by translating refractive index into a clear Brix value, a standard unit in food and beverage manufacturing that correlates directly with soluble solids and sugar content. Simple routine checks without complex setup Designed as a portable optical tester, the device requires minimal preparation and is well suited to spot checks on the production floor or at lineside. The handheld format supports quick samples and immediate readings, which helps to maintain throughput and reduces downtime for laboratory processing. The optical scale is straightforward to interpret, so routine sampling can be integrated into existing quality workflows without specialised training. Clear suitability across common food and beverage uses The refractometer is particularly appropriate for measuring sugar concentration in syrups, juices and fermentation broths. Its measuring range and accuracy make it useful for recipe control, incoming material inspection and product release checks. The instrument complements digital laboratory equipment by offering a fast, low-complexity method for frequent checks, allowing higher-precision instruments to be reserved for detailed analyses. Integration into a reliable supply and service network Sourcing the instrument through an established supplier ensures dependable delivery and access to practical advice. Metav combines technical experience with a broad product range to support workshops, laboratories and production sites across Europe. For customers seeking pragmatic precision tools, this handheld refractometer represents an accessible way to bring standardised measurement closer to the workbench and into daily routines. For purchasing guidance or technical clarification on the Euromex Hand Refractometer RF.6580, contact Metav Werkzeuge for competent advice and local supply from Emmerich — eMail info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical Data Article number: RF.6580 Name: Hand Refractometer, 0–80 Brix, sugar concentration Type: Refractometer Manufacturer: Euromex Measurements Measuring range: 0–80 Brix Accuracy: 0.5 Brix Special features Handheld design for on-site checks Intended for sugar concentration measurement FAQ How wide is the measuring range of the refractometer? The measuring range of the Euromex Hand Refractometer RF.6580 is 0–80 Brix, suitable for common sugar concentration measurements in food and beverage samples. What accuracy can be expected from this handheld instrument? The device offers an accuracy of 0.5 Brix, providing consistent readings for process control and routine quality checks with the RF.6580 refractometer. Is the instrument suitable for brewery and juice quality checks? Yes, the handheld refractometer is designed for sugar concentration testing in liquids such as fruit juices and brewing wort and is practical for on-site sampling. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
0-90mm Universal Refractometer Brix 0–90% 0.2 Resolution - Euromex
Take advantage of the combination of a wide 0–90 °Brix measuring range, three integrated scales and 0.2 °Brix accuracy for reliable sugar-concentration control in production and QC. Order the instrument directly via Metav Werkzeuge or consult our technical advisers for application-specific guidance. Universal Refractometer RF.6190 — Euromex refractometer, 0–90 °Brix, 3 scales The Universal Refractometer RF.6190 is a compact optical instrument for fast determination of sugar concentration in liquids, suited to food processing and laboratory quality checks. Wide measuring range 0–90 °Brix Three integrated scales for sugar concentration Accuracy of 0.2 °Brix for reliable readings Precise concentration control for production and laboratory use The optical measuring principle provides rapid numerical results within the 0–90 °Brix range, making the device ideal for monitoring sugar content during processing and quality control. The combination of a broad measuring range and a fine 0.2 °Brix resolution allows detection of small concentration changes that can affect product texture, consistency and taste. For readers unfamiliar with the unit: °Brix indicates the percentage by mass of sucrose in an aqueous solution, so a reading of 20 °Brix corresponds to roughly 20% sugar by weight. The instrument’s three scales enable direct interpretation across common concentration bands without manual conversion, streamlining workflows in canning, confectionery, beverage production and laboratory sampling. This supports rational decision-making by transforming optical measurements into actionable numeric targets for process control. Practical application, readability and supplier support Designed for routine checks and batch verification, the instrument facilitates quick acceptance sampling and in-process control where fast throughput matters. Clear scale markings and straightforward handling reduce operator time while improving repeatability of results; the unit therefore serves as a pragmatic tool for small production lines, craft producers and laboratory benches that require consistent sugar analysis. Where process integration or interpretation of readings is required, Metav Werkzeuge provides tailored advice and a European supply chain that emphasises availability and traceability. The Euromex instrument combines established measurement practice with accessible operation, helping teams make evidence-based adjustments during mixing, heating or dilution steps without disrupting production tempo. Contact Metav Werkzeuge in Emmerich for personalised advice on using the RF.6190 in specific production settings: info@metav-werkzeuge.com or +49 2822 7131930 — expert guidance and reliable supply from our European distribution hub Technical data Article number: RF.6190 Product type: Refractometer Product name: Universal refractometer for sugar concentration, 3 scales Brand: Euromex Facts Measuring range: 0–90 °Brix Accuracy: 0.2 °Brix UID: RF.6190 Special features Three measurement scales for sugar concentration Suitable for sugar concentration measurement Optical refractometer principle Euromex brand FAQ What is the measuring range of the refractometer? The refractometer measures sugar concentration across a 0–90 °Brix range, allowing coverage of most food and beverage applications. How precise are the readings from the RF.6190? Readings from the RF.6190 offer an accuracy of 0.2 °Brix, enabling detection of small changes in sugar concentration during process control. Can the instrument be used for industrial quality control? Yes, the RF.6190 is suitable for routine quality checks and in-process monitoring where sugar concentration must be verified quickly and reliably. What do the three scales on the device indicate? The three scales provide direct readings across different concentration bands for sugar solutions, simplifying interpretation without manual conversions. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
0.33x Photo Port Adapter for 1/3" C-Mount Cameras, Revision 2 - Euromex
Take advantage of precise optical coupling and a wider field of view while keeping installation and camera compatibility straightforward; order the adapter directly via Metav Werkzeuge or consult our specialists for system integration. Photo port adapter OX.9833 — 0.33x lens, C‑mount interface (Euromex) A Photo port adapter OX.9833 that allows a 1/3‑inch C‑mount camera to be attached to Oxion revision 2 microscopes, providing a 0.33x relay lens for a wider viewing area 0.33x relay lens for wider field of view C‑mount interface for 1/3‑inch cameras Compatible with Oxion revision 2 microscopes Optimised imaging with a wider field of view The 0.33x relay lens reduces the microscope image to match 1/3‑inch camera sensors, resulting in a noticeably broader field of view without compromising central detail. This optical reduction is particularly useful when documentation or overview images are required, as it enables more of the specimen to be captured in a single frame. The optical behaviour is simple to understand: the relay lens adjusts image scale so common industrial cameras record a correctly framed image, reducing the need for extensive repositioning. Secure mechanical coupling for repeatable results A dedicated C‑mount interface ensures a robust mechanical connection between the camera and the microscope photo port, supporting repeatable optical alignment and stable imaging over repeated sessions. The solid mount reduces play and vibration, which benefits time‑lapse documentation and measurement workflows where consistency matters. Where applicable, the mounting design also simplifies swapping cameras or eyepieces, so laboratory and workshop throughput is improved with minimal setup time. Practical compatibility for diverse inspection tasks Designed for use with Oxion revision 2 microscopes, this adapter integrates with inspection benches, teaching setups and routine quality checks. The combination of a relay lens and standard C‑mount enables the use of a wide range of machine vision and consumer cameras, allowing teams to select the most appropriate sensor for resolution and sensitivity requirements. For facilities equipping multiple stations, the adapter provides a pragmatic route to harmonise imaging standards across microscopes and cameras. Contact Metav Werkzeuge for tailored advice on system compatibility and supply of the OX.9833 photo port adapter; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: OX.9833 Name: Photo port adapter with 0.33x lens for Oxion revision 2 microscopes and 1/3‑inch camera with C‑mount Product type: Adapter Brand: Euromex Facts Optical reduction: 0.33x Camera sensor compatibility: 1/3‑inch Interface: C‑mount Special features Compatible with Oxion revision 2 microscopes Relay lens for wider field of view Manufacturer: Euromex FAQ What camera sizes are supported with this adapter? The adapter is configured for 1/3‑inch cameras and uses a C‑mount interface suitable for the majority of industrial and consumer 1/3‑inch camera modules. Will the adapter fit Oxion revision 2 microscopes only? The mechanical interface and optical design are specified for Oxion revision 2 models; compatibility with other revisions or brands requires verification of the photo port dimensions. Does the relay lens change image quality or resolution? The 0.33x relay lens changes image scale to expand the field of view; central resolution is preserved but final image resolution depends on the chosen camera sensor. Can the adapter be used for measurement or only documentation? When combined with a calibrated imaging camera, the adapter supports documentation and measurement workflows; ensure the camera and microscope calibration procedures are followed for metrological use. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
0.33x Projection Objective C-Mount, Low Magnification - Euromex
Combine precise 0.33× projection scaling with a standard C‑mount interface to capture larger specimen areas while maintaining straightforward camera integration; ideal for inspection and documentation workflows. Order the lens directly via Metav Werkzeuge or consult their specialists for system matching and installation advice. Projection 0.33x lens with C‑mount — Euromex projection lens for microscope imaging The Projection 0.33x lens with C‑mount is a low‑magnification projection lens designed to reduce the image scale from microscope optics to a size suited for C‑mount cameras, enabling larger fields of view for visual inspection and image capture 0.33× projection ratio for larger fields of view Standard C‑mount interface for camera compatibility Optimised for microscope projection imaging Compact optical design for easy integration Capture larger inspection areas without swapping optics A low projection ratio like 0.33× reduces the magnification delivered to the camera sensor, which results in a significantly wider field of view from the same objective. For quality inspection, production control and sample documentation this means fewer image stitches and shorter cycle times. The reduced image scale allows standard industrial cameras to record more of the specimen in a single frame, improving throughput while retaining sufficient detail for many metrology tasks. The optical adaptation also simplifies camera selection by aligning microscope image size with common sensor formats. Fast integration with standard camera systems for efficient workflows The C‑mount interface is an industry standard for compact imaging systems, providing mechanical stability and repeatable mounting for cameras. This compatibility reduces setup time when integrating the projection lens into an existing microscopy or inspection station. Calibration and alignment procedures become more predictable, permitting quicker validation of imaging parameters. For inspection lines and documentation stations, the result is a reliable optical connection that supports consistent image capture across batches, helping maintain traceable visual records. Practical benefits for documentation and routine inspection Designed as an optical accessory for projection imaging, the lens assists in producing consistent images for visual assessment and digital archiving. Its compact form factor eases mechanical integration into camera stacks or inspection rigs, and the simplified optical scaling supports straightforward image processing and measurement routines. When paired with robust camera hardware, the arrangement serves repetitive inspection tasks and documentation workflows, reducing handling time and improving reproducibility across production runs. Contact Metav Werkzeuge to match the Euromex projection 0.33× lens with the right camera and mounting solution for the application; Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: DC.1326 Label: Projection 0.33x lens with C‑mount Product type: Lens / Optical component Manufacturer: Euromex Core specifications Projection ratio: 0.33× Mount: C‑mount SKU: DC.1326 Features and applications Intended use: Projection imaging Application: Microscope camera integration Compatibility: C‑mount cameras Typical use: Inspection and documentation FAQ Is this lens compatible with standard C‑mount industrial cameras? Yes. The Euromex projection 0.33x lens with C‑mount is designed for direct mounting on standard C‑mount cameras (SKU DC.1326) to provide a stable optical connection for inspection imaging. What practical effect does a 0.33× projection ratio have on imaging? A 0.33× projection ratio reduces the image scale projected onto the sensor, increasing the usable field of view from the same objective and allowing larger specimen areas to be captured in a single frame. Can this projection lens be used with microscopes for documentation? Yes. The lens is intended for projection imaging and is suitable for microscope camera integration to support routine documentation and quality inspection tasks. Is an adapter required for cameras without a C‑mount? For cameras or optical systems that do not feature a C‑mount, an appropriate mechanical adapter or mounting solution will be required to interface with the Euromex projection lens. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
0.35x C-Mount Adapter for Zeiss PrimoStar 3 Microscopes and 1/3" C-Mount Cameras, 1/3" Format - Euromex
Take advantage of the combination of precise optical reduction, robust C‑mount compatibility and straightforward integration for clearer images and faster setup. Order the adapter directly via Metav Werkzeuge or consult the technical team for confirmation of fit and delivery options. 0.35× C‑mount adapter for Zeiss PrimoStar 3 microscope — C‑mount camera interface (AE.9835‑ZP3) The 0.35× C‑mount adapter for Zeiss PrimoStar 3 provides a reliable optical interface that adapts the microscope’s output to 1/3‑inch C‑mount cameras, enabling wider fields of view for documentation and inspection *Precision 0.35× optical reduction *Compatible with Zeiss PrimoStar 3 *Fits 1/3‑inch C‑mount cameras *Robust microscope camera interface Wider field of view for small‑sensor cameras The 0.35× optical reduction lowers the effective magnification delivered to the camera while preserving image geometry, so compact 1/3‑inch sensors capture a considerably larger field of view than without the adapter. For laboratories and inspection benches this translates into fewer image mosaics and faster sample documentation. The optical reduction is a passive glass assembly that modifies the projection from the trinocular port; operators familiar with camera coupling will recognise that the result is an increased usable image area without changing the microscope’s eyepiece magnification. Reliable mechanical fit and straightforward installation Designed as a C‑mount interface, the accessory provides a standard screw connection familiar to industrial cameras and many laboratory imaging systems. The adapter mates to the Zeiss PrimoStar 3 trinocular output with secure alignment, reducing mechanical play and easing repeatable camera positioning. The simple mechanical fit minimises the need for additional spacers and streamlines the integration process for imaging systems, making setup and replacement less time consuming in routine workflows. Practical benefits for teaching, quality control and documentation For teaching laboratories, routine quality checks and production inspection the adapter supports faster capture of overview images and accelerates visual record keeping. The accessory reduces the number of required image captures for large specimens and simplifies image comparison across sessions. By converting the microscope output to a camera‑friendly format, the interface helps standardise documentation procedures and supports traceable visual records in training and compliance contexts. Supply assurance and technical clarification available Metav’s distribution ensures fast access to imaging accessories from stock in Emmerich, combined with technical guidance for customers seeking clarity on compatibility or imaging performance. If additional technical specifications or fitting measurements are required, the distributor’s technical advisors can supply the necessary data and advise on optimal camera sensor selection. The adapter’s documented compatibility and the availability through an established supplier support predictable procurement and project planning. Contact Metav Werkzeuge for compatibility checks and secure delivery from Emmerich to the bench Technical Data Article number: AE.9835‑ZP3 Label: 0.35x C‑Mount Adapter for Zeiss PrimoStar 3 microscope and 1/3 inch C‑mount cameras Manufacturer: Euromex Product type: Adapter UID: AE.9835‑ZP3 Facts Optical factor: 0.35× Sensor compatibility: 1/3‑inch C‑mount cameras Intended system: Zeiss PrimoStar 3 Mount: C‑mount Design & Features Optical reduction for larger field of view Standard C‑mount mechanical interface Compact form for easy installation Designed for camera documentation and inspection FAQ What does a 0.35× reduction mean for captured images? The 0.35× factor reduces the microscope’s projected image to approximately one third of its linear magnification, so a 1/3‑inch C‑mount camera records a wider area on the sample; the AE.9835‑ZP3 adapter is specified to produce this effect on the Zeiss PrimoStar 3 output. Which cameras are compatible with this adapter? Cameras that use a 1/3‑inch C‑mount mechanical interface are compatible; the adapter converts the microscope output to the standard C‑mount thread size and optical format expected by such cameras. Will the adapter work with other Zeiss microscopes? The adapter is specified for the Zeiss PrimoStar 3 trinocular output; use with other models should be checked against the microscope’s camera port dimensions and imaging tube specification before procurement. Does the adapter change image quality or resolution? The accessory alters the effective magnification and field of view; resolution on the sensor depends on pixel size and the optical path. The AE.9835‑ZP3 preserves image geometry while enabling wider coverage for small sensors. Is installation reversible without modifying the microscope? Yes, the adapter mounts to the camera port using standard connections and can be removed without permanent change to the microscope, supporting flexible use across different imaging setups. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
0.4x C-Mount Adapter for 1/3" C-Mount Camera, 0.4x Magnification - Euromex
Compact optical adapter combining 0.4× magnification and native compatibility with 1/3‑inch C‑mount cameras for broader inspection coverage and straightforward integration. Benefit from a widened field of view and simplified system setup that supports efficient imaging workflows — order this adapter directly via Metav Werkzeuge or consult the technical team for specification matching. C‑Mount 0.4× Adapter for 1/3‑inch C‑Mount Cameras (Euromex) The C‑Mount 0.4× Adapter for 1/3‑inch C‑mount cameras is a purpose-designed optical accessory that reduces image magnification to expand the usable field for industrial inspection and imaging applications. 0.4× magnification for wider field of view Compatible with 1/3" C‑mount cameras Precision optical reduction for inspection systems Compact design for easy integration Capture a wider scene without changing optics The 0.4× magnification reduces the effective magnification of an attached lens, providing a noticeably larger field of view on a 1/3‑inch sensor without altering the camera or objective. This optical reduction keeps the imaging chain simple: instead of swapping to a shorter focal length lens, the adapter delivers a broader overview while preserving alignment and focus characteristics. For applications where coverage and context are as important as detail — such as visual inspection, quality control, or process monitoring — this accessory streamlines setup and reduces downtime. Plug‑and‑play integration into existing imaging lines Designed for the standard C‑mount, the adapter mounts directly to cameras and lenses that conform to that interface, enabling rapid installation and repeatable positioning. The mechanical compatibility ensures that lens registration and sensor distance remain consistent, minimising the need for recalibration after fitting. By maintaining the C‑mount form factor, the accessory supports modularity in machine vision setups and speeds up system changes in production or laboratory environments, improving throughput and operational efficiency. Practical effects explained for non‑specialists Applying a 0.4× optical reduction means each point in the scene is recorded at lower magnification on the 1/3‑inch sensor, so more of the object fits into the frame. In practical terms, this results in fewer images needed to inspect a part and less mechanical movement for scanning systems. The optical principle is straightforward: the adapter alters the effective focal length seen by the sensor. This explanation helps users without extensive optics training understand why the adapter improves coverage and how it interacts with existing lenses. Suitable for inspection benches and compact imaging systems The accessory is tailored for compact camera setups where space and simplicity matter. Its compact design and C‑mount interface make it well suited to benchtop inspection, medical imaging auxiliaries, and laboratory documentation where a larger field of view reduces handling and speeds evaluation. As an Euromex‑branded adapter, the component is an option for teams seeking consistent imaging performance from a recognised supplier in microscopy and imaging accessories. Contact Metav Werkzeuge for a technical consultation and to request a tailored procurement proposal for the Euromex C‑Mount 0.4× Adapter (DI.9840) directly from our Emmerich hub Product details Article number: DI.9840 Name: C‑mount with 0.4× magnification for 1/3‑inch C‑mount camera Product type: Adapter Manufacturer: Euromex Core technical data Magnification: 0.4× Sensor compatibility: 1/3‑inch Mount: C‑mount Features C‑mount adapter For 1/3‑inch C‑mount cameras Optical reduction 0.4× Brand: Euromex FAQ What does the 0.4× magnification change on my camera? The 0.4× reduction reduces the effective magnification seen by the sensor, so a C‑Mount 0.4× Adapter yields a wider field of view on a 1/3‑inch camera and captures more of the scene per image. Is this adapter compatible with all C‑mount lenses? Compatibility is achieved via the standard C‑mount interface; the adapter is intended for lenses and cameras using that mount, specifically to expand coverage on 1/3‑inch sensor systems. Will image quality deteriorate after fitting the adapter? When used within its design parameters, the adapter preserves the optical path while altering magnification; any effect on sharpness depends on the lens and sensor combination rather than the adapter alone. For which applications is this adapter most suitable? The accessory is particularly useful for inspection, documentation and laboratory imaging where a larger field of view reduces scanning time and simplifies process monitoring. Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
0.50x C-Mount Adapter 30mm Photoport, 1/2" C-Mount Cameras - Euromex
Take advantage of a precise 0.50x optical reduction and a robust C‑Mount interface to capture a wider field of view on Zeiss microscopes with a 30 mm photoport; the adapter delivers consistent mechanical fit and straightforward camera attachment. Order or request advice directly via Metav Werkzeuge for reliable supply and compatibility checks. 0.50x C‑Mount Adapter AE.9850‑ZA – 30 mm photoport to 1/2″ C‑Mount for Zeiss Axio series (Euromex) 0.50x C‑Mount Adapter AE.9850‑ZA converts a 30 mm Zeiss photoport to accept 1/2″ C‑Mount cameras, engineered for use with Axio and Stemi microscope series. 0.50x optical reduction for broader field of view Fits 30 mm Zeiss photoports including 60N series Secure 1/2" C‑Mount interface for industrial cameras Compatible with Axio and Stemi microscope series Capture larger areas without loss of alignment The 0.50x optical reduction adapts the optical path to expand the field of view, making it easier to record larger specimens or assemblies without excessive stitching or sensor cropping. By halving the effective magnification, the mounting adapter simplifies image composition for medium and small sensors while preserving the optical axis alignment. This approach reduces the need for additional optics and helps maintain consistent image scaling across routine documentation and inspection tasks. Reliable mechanical fit for Zeiss 30 mm ports Designed for direct integration with Zeiss 30 mm photoports, the adapter provides a stable mechanical interface for the Zeiss 60N‑C and 60N‑T2 ports found on Axio examiner, Axio Imager, Axio Lab, Axio Observer, Axio Scope, Axio Zoom, Stemi 508 and SteREO Discovery microscopes. The precise fit minimises play and reduces repositioning errors, which supports reproducible results in inspection workflows and photographic documentation. Compatibility is stated for these models to ensure correct application in laboratory and industrial environments. Robust camera interface for industrial imaging The adapter offers a standard 1/2″ C‑Mount connection, enabling straightforward camera attachment and firm retention during extended use. The mechanical design prioritises concentric alignment and secure locking to prevent rotation and misalignment when mounting cameras for measurement, documentation or live imaging. This stable camera integration reduces the risk of image shift between captures and supports integration with a wide range of C‑Mount imaging sensors commonly used in education, research and quality assurance. Clear specification and dependable sourcing for workshop use For purchasing and supply, the product is offered via established distribution channels with an emphasis on consistent availability and quality assurance. Metav acts as a practical supply partner and quality filter for the European market, combining a broad catalogue with local stock management from Emmerich. Where precise compatibility or additional technical details are required, buyers have access to informed advice and documented specifications to support procurement decisions. Contact Metav Werkzeuge for compatibility checks and secure supply from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 for detailed advice on the AE.9850‑ZA adapter Technical Data Article number: AE.9850‑ZA Type: Adapter Manufacturer: Euromex Short description: 0.50x C‑Mount adapter for Zeiss AxioStar 30 mm photoport Core technical data Optical factor: 0.50x Photoport diameter: 30 mm Camera interface: 1/2″ C‑Mount SKU / UID: AE.9850‑ZA Special features Compatibility with Zeiss 60N‑C and 60N‑T2 photoports Suitable for Axio examiner, Axio Imager, Axio Lab, Axio Observer, Axio Scope, Axio Zoom Also compatible with Stemi 508 and SteREO Discovery microscopes Designed for stable mechanical alignment and secure camera mounting FAQ What does the 0.50x factor change in captured images? The 0.50x factor reduces the effective magnification, expanding the field of view so larger areas can be imaged with the same camera; the AE.9850‑ZA adapter achieves this without additional relay optics. Which Zeiss photoports are supported by this adapter? The adapter is specified for Zeiss 30 mm photoports, including the 60N‑C and 60N‑T2 variants typically found on Axio and related series; this compatibility ensures secure mechanical fit. Can standard 1/2″ C‑Mount cameras be used directly with the adapter? Yes, the AE.9850‑ZA provides a standard 1/2″ C‑Mount interface intended for direct camera mounting and stable integration in imaging setups. Is the adapter suitable for stereo and compound microscopes? The adapter is compatible with both stereo models such as Stemi 508 and SteREO Discovery and with compound systems in the Axio family, enabling versatile use across microscopy workflows. How does the adapter support reproducible imaging in an inspection process? By providing a precise mechanical interface and consistent optical reduction, the AE.9850‑ZA reduces repositioning errors and maintains image scaling, which supports repeatable documentation and comparison tasks. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com
See microstructure clearly for decisive quality control
A metallographic microscope (also referred to as a metallurgical microscope or inspection microscope) is an indispensable optical precision instrument in metallography. It renders the microstructure of metals and alloys visible at high magnification and forms the essential link between physical sample preparation and materials‑science assessment.
How the system works in the lab
Metals are opaque to transmitted light, so inspection is performed using reflected‑light techniques. The setup comprises an illumination system that directs light through a beam splitter onto the prepared surface, a high‑quality objective that provides the primary magnification and resolution, and a tube with an eyepiece for visual inspection. Image quality is governed primarily by the objective’s numerical aperture, which determines the resolving power for fine structural details. Integration with a digital camera and specialised evaluation software enables accurate imaging, documentation and norm‑compliant measurement of grain size, phase fractions and microdefects.
Practical benefits for production and quality assurance
In industrial quality control the microscope provides measurable outcomes that reduce risk and save time:
- improved detection of inclusions, pores and micro‑cracks, lowering the chance of in‑service failure
- reproducible grain‑size and phase analysis (ferrite, pearlite, martensite) through calibrated imaging and software tools
- faster throughput in inspection routines, reducing sample turnaround and non‑productive downtime
- enhanced traceability by saving images and measurement reports to support audits and batch acceptance
Why Metav is the pragmatic partner for microscopes
Metav combines decades of metrology expertise with a broad range of inspection solutions, acting as a quality filter for the european market from its base in Emmerich. With over 48,000 customers and more than 250,000 products, Metav offers a single, reliable source for microscopes, camera systems and evaluation software, ensuring consistent supply and professional advice for industry and workshops.
FAQ
Which inspection tasks are best suited to a metallographic microscope?
A metallographic microscope is ideal for analysing grain size, identifying microstructural phases such as ferrite, pearlite and martensite, and detecting microscopic defects like inclusions, pores or cracks that may affect mechanical integrity.
How does numerical aperture affect image quality?
The objective’s numerical aperture directly influences resolution and contrast; higher numerical aperture allows the microscope to resolve finer features in the sample microstructure, which is critical for accurate phase identification and defect sizing.
Can I connect a camera and perform automated measurements?
Yes. Modern metallographic microscopes can be paired with a digital camera and evaluation software to capture images, perform calibrated measurements and generate reproducible, norm‑compliant reports for documentation.
What should I consider when choosing objectives for metallurgical work?
Select objectives with appropriate magnification and high numerical aperture, compatible with reflected‑light illumination and the intended measurement standards; quality optics minimise artefacts and improve repeatability of results.
Does Metav supply complete inspection solutions for workshops?
Metav supplies microscopes, camera systems and software as part of a comprehensive product range, backed by decades of expertise and a commitment to reliable delivery from Emmerich.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com