High‑precision microscopes for metallographic inspection
A metallographic microscope is a specialised optical instrument designed to reveal the microstructure of metals and alloys, enabling precise analysis of grain size and identification of phases such as ferrite, pearlite and martensite while detecting microscopic defects like inclusions, pores and cracks. Used in industrial quality assurance, these microscopes combine a controlled reflected‑light illumination system, high‑quality objectives with critical numerical aperture and a tube and eyepiece for observation to ensure reliable resolution of fine structural details. Integrated digital camera systems and evaluation software allow norm‑compliant measurement, documentation and reproducible assessment, making them indispensable for material characterisation and process validation.
114mm 0.75× Objective Lens Attachment, 114 mm Working Distance, Compatible with StereoBlue Series - Euromex
Take advantage of precise low‑magnification inspection with a compact optical enhancement that preserves a large working distance and fits StereoBlue models. The combination of a 0.75× magnification factor and a 114 mm working distance enables clear observation of larger samples while keeping handling space; order directly via Metav Werkzeuge or consult the team for compatibility advice. SB.8907 – 0.75× attachment lens for StereoBlue microscopes (Euromex) The SB.8907 is an attachment lens that reduces native magnification to 0.75× while maintaining a 114 mm working distance, designed for use with StereoBlue stereo microscopes and their P/U variants. 0.75× magnification factor 114 mm working distance Compatible with StereoBlue SB.1902 / SB.1903 Wider visual coverage for routine inspection and assembly An attachment lens with a 0.75× factor reduces the effective magnification, which in turn expands the visual coverage compared with the standard optical configuration. This adjustment is useful for inspection tasks where a broader overview is required rather than the highest possible enlargement. The result is a more efficient overview during component placement, general quality checks or sample sorting, achieved without altering the primary objective optics. Comfortable clearance and handling retained during work The 114 mm working distance provided by this attachment lens preserves tool clearance and hand accessibility beneath the optics, making it suitable for bench work that requires manipulation of parts beneath the objective. Compatibility is declared for the StereoBlue series variants SB.1902‑P, SB.1903‑P, SB.1902‑U and SB.1903‑U; note that for the base SB.1902 and SB.1903 models the maximum object height is 1 cm, which should be considered when planning fixtures or sample holders. This combination of sustained working distance and adapted magnification supports practical workflows in electronics inspection and small‑parts assembly. Simple integration and targeted application benefits The accessory is engineered to integrate with the designated StereoBlue configurations, offering a straightforward optical modification that broadens application possibilities without replacing the main microscope head. For users seeking a balance between field size and resolution, this solution provides a predictable optical change that can be relied on for repeatable inspection setups. Further technical specifics and suitability questions can be clarified with Metav Werkzeuge, where product matching and application advice are provided to ensure the accessory meets the intended use. For extended compatibility checks or to secure the SB.8907 for stereo inspection tasks with Euromex optics, contact Metav Werkzeuge for personalised advice and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: SB.8907 Product: Attachment lens Brand: Euromex Compatible series: StereoBlue Facts Magnification factor: 0.75× Working distance: 114 mm Maximum object height (SB.1902 / SB.1903): 1 cm Special features Compatible with SB.1902‑P, SB.1903‑P, SB.1902‑U, SB.1903‑U Cross‑selling SKUs: SB.1902; SB.1903 Type: Vorsatzlinse (attachment lens) FAQ What does the 0.75× factor change in everyday use? The SB.8907 attachment lens from Euromex reduces the effective magnification to 0.75×, which widens the observable area and makes it easier to inspect larger subjects without losing the practical working distance of the microscope. Which StereoBlue models are supported? Compatibility is specified for the StereoBlue variants SB.1902‑P, SB.1903‑P, SB.1902‑U and SB.1903‑U; the data also notes that the standard SB.1902 and SB.1903 models have a maximum object height of 1 cm. Is the 114 mm working distance beneficial for assembly tasks? Yes, the 114 mm working distance retained with this attachment lens keeps sufficient clearance for tool access and manual handling, which helps maintain ergonomic and safe assembly or repair operations. Will image quality be affected by fitting this attachment lens? Fitting the SB.8907 changes the magnification and the observed field, which is an intended optical trade‑off; the accessory is designed to deliver consistent results when used on the declared StereoBlue configurations. Are there specific application areas where this lens is most useful? The Euromex SB.8907 attachment lens suits inspection and handling tasks where a broader field of view is required while maintaining working distance, for example component inspection, general quality control and sample sorting. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
118mm Stereo Zoom Microscope 7x–45x Binocular Stand LED Illumination, 52–76mm IP - Metav IndustryLine
Take advantage of the combination of a wide 7x–45x zoom range, reliable adjustable LED illumination and a 45° rotatable binocular head for flexible inspection tasks; order the ZS0745+SD2-D directly via Metav Werkzeuge or consult our advisors for application support. Stereo‑Zoom Microscope ZS0745+SD2‑D — Binocular microscope with 7x–45x zoom and adjustable LED illumination (Metav IndustryLine) The Stereo‑Zoom Microscope ZS0745+SD2‑D is a binocular stereo zoom microscope developed for demanding tasks in education, laboratory work and industrial inspection, offering a smooth transition from overview to fine detail Binocular stereo zoom 7x–45x range Adjustable incident and transmitted LED 45° rotatable binocular head Included SWH10 eyepiece and stand Clear magnification from overview to detail The instrument's continuous 7x–45x zoom provides a practical span from broad visual orientation to detailed inspection, reducing the need for multiple objectives. Multi‑coated optics maintain contrast and minimise flare, so structures remain discernible under varying lighting. With a field of view 33–5.1 mm, operators can choose a wide scene or zoom in for local features while keeping the image sharp. The working distance 118 mm gives sufficient room to handle samples and tools beneath the optics, which supports measurement, soldering or minor mechanical operations without frequent repositioning. Ergonomic handling and dependable illumination A 45° rotatable head combined with an interpupillary 52–76 mm range and ±6 diopter adjustment reduces eye and neck strain during long sessions. The integrated, adjustable incident and transmitted LED illumination (3 W) supplies even, controllable light for opaque parts and bright‑field inspection of translucent specimens, improving defect visibility. Built on a stable column (Ø25×240 mm) and a 292×283 mm base, the design keeps the view steady during manipulation; the balance of stability and accessibility supports both teaching environments and routine quality control. Ready for training rooms, laboratories and production control Specifically developed for demanding applications in training, laboratory and industrial contexts, this binocular unit combines solid mechanical quality with practical usability. The delivery contents include an SWH10 eyepiece, a robust stand and an auxiliary lens so the workstation is operational immediately. At about 6.15 kg the assembly is robust yet manageable; materials and finish reflect a focus on repeatable daily performance and straightforward maintenance, making it suitable for shared workbenches and classroom setups. Contact Metav Werkzeuge for tailored advice and secure the ZS0745+SD2‑D from Metav IndustryLine with prompt dispatch from Emmerich. Technical data Article number: M503.211.2 SKU: M503.211.2 GTIN: 4054469144801 eClass: 32130102 ETIM: EC001685 Facts Magnification: 7x–45x Working distance: 118 mm Field of view: 33–5.1 mm Illumination power: 3 W Interpupillary range: 52–76 mm Diopter adjustment: ±6 Footprint: 292 × 283 mm Column: Ø25 × 240 mm Weight: 6.15 kg Special features 45° inclined head, 360° rotatable Adjustable incident and transmitted LED illumination Multi‑coated optics Includes SWH10 eyepiece, stand and auxiliary lens Designed for education, laboratory and industrial use Binocular observation type ZS0745 FAQ What magnification range does the instrument provide? The ZS0745+SD2‑D offers a continuous 7x–45x magnification range suitable for both overview inspections and detailed work. Is the illumination suitable for opaque and transparent samples? Yes; the microscope uses adjustable incident and transmitted LED illumination (3 W) to provide shadow‑free lighting for opaque parts and bright‑field illumination for translucent specimens. Can the head be adjusted for different observers and tasks? Yes; the 45° rotatable head, interpupillary 52–76 mm and ±6 diopter adjustment allow comfortable observation for varied operators and prolonged use. Which accessories are supplied with the unit? Delivery includes an SWH10 eyepiece, a stand and an auxiliary lens so the microscope is ready for immediate use. Is the instrument suitable for teaching and industrial inspection? Designed explicitly for demanding applications in training, laboratory and industrial inspection, the ZS0745+SD2‑D provides the robustness and optical quality required for both educational and production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
119mm Objective 2x, Working Distance 119mm - Euromex
Take advantage of the combination of compact magnification, a long working distance and direct compatibility with the BE.18xx series for safer sample handling and clearer inspection results; order through Metav Werkzeuge or contact our consultants for integration advice. BE.7420 — 2× objective for BE.18xx microscopes (119 mm working distance) by Euromex The BE.7420 objective is designed for the BE.18xx microscope seriesand is intended to improve optical reach and enable comfortable handling of taller specimens and assembly aids during inspection and documentation. 2× magnification for finer detail 119 mm working distance for safer access Compatible with the BE.18xx microscope series Euromex precision optics for reliable imaging Greater working distance reduces handling risks and speeds setup The long working distance of 119 mm gives a clear practical benefit for tasks that require instrument access or manual manipulation of samples. With extra space between the lens and the specimen, there is a reduced risk of tool collisions or accidental contact during alignment and measurement, which in turn minimises downtime for repositioning. For production and laboratory environments where throughput and repeatable handling matter, this extended reach supports more efficient setup procedures while maintaining focus on the sample. Optical refinement that supports inspection and clear documentation Designed as a surgical enhancement to the optical chain, the 2× magnification objective improves detail recognition without dramatically narrowing the field of view. The objective delivers improved image scale for routine evaluation and photographic recording. Combined with Euromex manufacturing standards, the lens contributes to consistent contrast and repeatable imaging results, which benefits quality control and visual documentation workflows where clear, comparable images are required. Practical compatibility for integration into established systems This lens is specified for the BE.18xx family and therefore offers straightforward compatibility with microscopes in that series. The design intent is to provide a direct optical upgrade for users who need slightly higher magnification while preserving the system's working ergonomics. For operators using inspection rigs, educational benches or workshop microscopes, the objective helps bridge the gap between low-power overview optics and higher-magnification objectives without compromising handling space. When to choose this objective and how it adds value Select this objective where expanded reach and a modest magnification increase are priorities: routine component inspection, assembly verification, or any application requiring both hand access and enhanced visual detail. By choosing an optical accessory that maintains a large gap to the specimen while delivering clearer imagery, process reliability improves and delicate samples remain protected. If additional technical data is required, technical queries can be directed to Metav Werkzeuge via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Contact Metav Werkzeuge for tailored advice on integrating the BE.7420 objective into existing BE.18xx setups and to confirm compatibility with inspection configurations Technical Data SKU: BE.7420 Description: 2× objective for BE.18xx, working distance 119 mm Manufacturer: Euromex Product type: Objective / lens UID: BE.7420 Facts Magnification: 2× Working distance: 119 mm Special features Compatibility: BE.18xx series Brand: Euromex Product type: Objective / lens FAQ Is this objective compatible with all BE.18xx microscope models? The BE.7420 objective is specified for the BE.18xx series and is intended to be compatible with models within that family; compatibility should be confirmed against the specific BE.18xx microscope configuration. What practical benefits does the 119 mm working distance offer? A working distance of 119 mm provides additional space for manual handling, tool access and fixturing during inspection, which reduces collision risk and simplifies sample manipulation when using the BE.7420 objective. Can the objective be used for photographic documentation? Yes, the BE.7420 objective supports clearer imaging at modest magnification, which aids visual documentation; camera integration depends on the existing optical path and adapter options of the host microscope. Is the BE.7420 suitable for delicate or tall specimens? The long working distance makes the BE.7420 particularly suitable for taller or delicate specimens where extra clearance is required while maintaining improved visual detail. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
119mm Stereo Microscope Long Working Distance 0.5x/2x Objectives 5x–20x 1W LED - Euromex
Benefit from the 119 mm working distance, 45° binocular head with dioptre adjustment and the supplied dovetailed 0.5x/2x objectives for flexible 5x–20x inspection — order the Euromex BE.1820 microscope head directly via Metav Werkzeuge or ask our consultants for application advice. Euromex BE.1820 stereomicroscope head — 119 mm working distance, 5x/20x magnification, 1 W LED A Euromex BE.1820 stereomicroscope head designed for inspection and assembly tasks that require a long working distance and precise stereo vision 119 mm long working distance for easy handling 45° binocular head with dioptre adjustment Dovetailed 0.5x and 2x objectives included 5x and 20x total magnification; 1 W LED illumination Improved access and efficient inspection with extended working distance The 119 mm working distance delivers clear practical benefits when handling larger specimens or carrying out assembly and quality-control tasks. A longer working distance increases space for tools and manipulators, reduces the need to reposition components and allows visual inspection without compromising operator comfort. In production environments where parts are handled frequently, the extended clearance helps maintain throughput and reduces handling-related interruptions. Comfortable, fatigue‑resistant observation for sustained use The 45° binocular head with dioptre adjustment provides ergonomic viewing and precise focus correction between eyepieces, which is important during prolonged inspection sessions. The angled optical axis reduces neck strain compared with upright systems, while the dioptre facility permits individual visual correction without affecting overall focus. This combination supports consistent measurement and visual assessment over extended shifts. Rapid optical versatility for diverse tasks Supplied 0.5x and 2x dovetailed objectives enable immediate adaptation between low and higher magnification, producing 5x–20x magnification options suitable for coarse inspection and detailed examination. The dovetail mounting allows quick, repeatable objective changes, saving setup time between different operations. Such flexibility is advantageous in mixed‑product workshops and laboratories where a single optical head must serve multiple inspection roles. Consistent illumination and robust optical function Integrated 1 W LED illumination supplies stable, cool light that supports clear contrast and reduces thermal drift at the observation plane. LED lighting offers long life and reliable output for repetitive inspection tasks. Delivered as an optical head with dovetailed objectives and a binocular viewing tube, the unit is configured to provide dependable stereo imaging for routine quality control, assembly verification and visual research applications. Contact Metav Werkzeuge for tailored advice on integrating the Euromex BE.1820 stereomicroscope head into production; our team in Emmerich will assist with technical fit and delivery arrangements. Technical data Article number: BE.1820 Product type: Microscope head Brand: Euromex Supplied: dovetailed 0.5x and 2x objectives Illumination: 1 W LED Head angle: 45° binocular head with dioptre adjustment Working distance: 119 mm Numbers / Core technical data Working distance: 119 mm Magnification: 5x Magnification: 20x Illumination power: 1 W Head angle: 45° Special features / Versions Dovetailed objectives for quick change Objectives: 0.5x and 2x Long working distance design Binocular viewing tube Dioptre adjustment for individual correction Integrated 1 W LED illumination FAQ What is the working distance of the head? The working distance is 119 mm for the Euromex BE.1820 stereomicroscope head, providing extra space for handling components and inspection tools. Which magnifications are available with the supplied optics? The supplied dovetailed 0.5x and 2x objectives yield total magnifications of 5x and 20x respectively, suitable for both overview inspection and finer detail work. Is there dioptre adjustment on the viewing head? Yes, the 45° binocular head includes dioptre adjustment to equalise focus between the eyepieces for precise, comfortable observation. What illumination is included with the unit? A 1 W LED illumination is included, offering stable, cool lighting that supports consistent visual work and long operating life. How are the objectives exchanged or configured? Objectives are dovetailed for quick, repeatable exchange; the design allows fast reconfiguration of the optical path without lengthy realignment. For which tasks is this optical head best suited? The Euromex BE.1820 microscope head is ideal for visual inspection, assembly checks and quality control where a long working distance and stereo observation are required. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Netherlands, info@euromex.com
11in 250–225mm Digital 4K UHD Autofocus MacroZoom Camera 8.3MP CMOS HDMI Wi‑Fi HD Screen - Euromex
Take advantage of the combination of 4K imaging, 18x optical zoom and flexible connectivity for precise inspection and fast documentation. Order the MacroZoom system directly via Metav Werkzeuge or contact our consultants for tailored advice. Euromex MacroZoom MZ.4700-HDS — 4K UHD Autofocus Digital Camera with 11-inch HD Screen The MacroZoom MZ.4700-HDS is a versatile digital microscope camera designed for inspection, quality control and documentation tasks, featuring a Sony 1/2.8-inch 4K CMOS sensor and a working distance of 250 to 225 mm. 4K Sony 1/2.8" CMOS sensor 18x optical zoom ratio 11-inch HD touchscreen display HDMI, USB and Wi‑Fi connectivity Sharp, reliable imagery for inspection and documentation Equipped with a 4K-resolution camera and an 8.3 MP sensor, the system delivers clear image detail that supports visual inspection and traceable documentation. The integrated Sony 1/2.8-inch CMOS sensor provides improved light sensitivity compared with smaller sensors, which helps when examining fine structures or features under limited illumination. For users unfamiliar with sensor formats: a larger sensor generally means better signal-to-noise ratio and crisper results, making defect detection and reporting more dependable. Flexible handling and connectivity to speed up workflow The built-in 11-inch HD screen and selectable computer or stand-alone mode enable immediate review or direct capture to a workstation. Interfaces include HDMI, USB and Wi‑Fi, allowing image transfer to measurement software or cloud storage without interrupting production. The autofocus function reduces time spent on manual adjustments, while the specified working distance of 250–225 mm leaves sufficient space to manipulate components or tooling beneath the lens, supporting ergonomic, non-contact inspection routines that protect delicate samples. Optical zoom and illumination for precise examination A dedicated 18x optical zoom combined with a dedicated macro design provides variable magnification without loss of native image quality, unlike digital zoom which crops and enlarges pixels. The view is complemented by the standard LED ring light, which supplies uniform illumination for high-contrast imaging and reduces artefacts from reflections. These features together lower rework rates and enable faster decision-making on the shop floor, improving throughput for small-part inspection and assembly verification. For high‑resolution inspection and efficient documentation, choose the Euromex MacroZoom MZ.4700-HDS — contact Metav Werkzeuge for personalised ordering information and expert guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: MZ.4700-HDS Brand: Euromex Product type: Digital camera / digital microscope Model series: MacroZoom Core specifications Resolution: 8.3 MP Sensor format: 1/2.8 inch Working distance: 250 to 225 mm Screen diagonal: 11 inches Special features 4K UHD autofocus MacroZoom with 18x optical zoom ratio Standard LED ring light Computer and stand-alone mode HDMI, USB, Wi‑Fi & internet interface FAQ What image quality can be expected for inspection tasks? The MacroZoom MZ.4700-HDS delivers 4K image quality from an 8.3 MP Sony 1/2.8-inch CMOS sensor, providing the detail required for routine inspection and documentation. Which connectivity options are available for integration? The camera supports HDMI, USB and Wi‑Fi, enabling the MacroZoom MZ.4700-HDS to connect to monitors, PCs or networks for live viewing and image transfer. Can the unit be used without a computer? Yes, the MacroZoom MZ.4700-HDS offers a stand-alone mode with an 11-inch HD screen for direct inspection and capture without a connected computer. How does the 18x optical zoom benefit measurement and inspection? The 18x optical zoom provides variable magnification while maintaining native image quality, allowing close examination of fine details without digital enlargement artefacts. Is lighting included for detailed imaging? A standard LED ring light is supplied, offering even illumination for high-contrast images and consistent inspection results. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com
11in HD Display With Column Mount, Compatible With MZ.4714 - Euromex
Take advantage of a compact 11-inch HD display with an included column attachment for straightforward mounting and reliable use with the MZ.4714 microscope; efficient visual inspection and faster documentation workflows are the result. Order the display directly via Metav Werkzeuge or consult their specialists for compatibility advice. MZ.4716 11-inch HD monitor for MZ.4714 (Euromex) The MZ.4716 is an 11-inch HD monitor intended as a display accessory for the MZ.4714 microscope, supplied complete with a column attachment for secure mounting and straightforward integration into inspection stations. 11-inch HD display Includes column attachment for mounting Compatible with MZ.4714 microscope Compact monitor for tight workspaces Clear imaging that improves inspection and documentation The compact 11-inch HD display delivers sharper on-screen detail than standard low-resolution panels, which assists in identifying fine structures during routine inspections. As a dedicated display unit for inspection setups, the monitor preserves image fidelity from the connected microscope and supports quicker visual decision-making. The result is more reliable documentation and fewer repeat checks, which enhances throughput in repetitive measurement and quality-control tasks. Fast, secure mounting minimises setup time Supplied with a robust column attachment, the display allows secure, repeatable positioning above workspaces and around microscopes. The included mount reduces installation complexity and limits downtime during setup changes or relocation. This practical mounting concept supports a steady working posture for operators and contributes to consistent image framing, which in turn simplifies comparative inspections and saves time across repetitive procedures. Practical design for workshops and laboratory benches Designed as a monitor / computer accessory for bench-top use, the unit occupies a minimal footprint while delivering the visual clarity expected in professional inspection contexts. The Euromex display integrates with existing inspection rigs and is suitable for confined work areas where a full monitor stand would be impractical. For additional technical data or to confirm fitment for specific rigs, operators may request further specifications by email at info@metav-werkzeuge.com Contact Metav Werkzeuge for expert advice on the Euromex 11-inch HD monitor and reliable delivery direct from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MZ.4716 Label: 11-inch HD monitor for MZ.4714 including column attachment Product type: Monitor / computer accessory Manufacturer: Euromex Core specifications Screen diagonal: 11 inches Compatible model: MZ.4714 Special features HD display Column attachment included Designed for integration with microscope MZ.4714 Compact form factor for limited space FAQ Is the monitor compatible with the MZ.4714 microscope? Yes. The MZ.4716 is designed specifically as a display accessory for the MZ.4714 and includes the column attachment required for compatible mounting. Does the package include mounting hardware? The display is supplied with a column attachment for secure positioning; this attachment is intended to simplify integration with microscope rigs. Is the screen suitable for close-up visual inspection tasks? The HD panel of the MZ.4716 provides improved on-screen detail for inspection and documentation, making it suitable for close-up visual work typical in bench-top inspection stations. Can the monitor be used in confined workspaces? The compact form factor and included column mount make the display appropriate for limited bench space and tight workshop layouts. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
11in HD Monitor With Column Mount, 11in Diagonal - Euromex
Take advantage of a compact 11-inch HD display combined with an integrated column mount to streamline visual inspections and workstation layout. Order the monitor directly via Metav Werkzeuge or consult our specialists for tailored integration with existing inspection systems. MZ.4712 — 11-inch HD monitor with column mount (Euromex) The MZ.4712 is an 11-inch HD monitor designed as an accessory for the MZ.4710 series, supplied with a column mount for stable positioning in laboratory and workshop inspection setups. *11-inch HD display for clear imagery *Included column mount for secure fixing *Compact monitor for tight bench spaces *Designed for MZ.4710 integration Sharper inspection with a compact, high-definition display The 11-inch HD panel delivers a clear image area that helps operators identify fine detail without occupying excessive bench space. For microscopy and visual inspection tasks, a defined display size improves workflow speed and reduces eye strain during repeated measurements. The screen’s HD classification indicates enhanced clarity for visual evaluation and documentation, supporting more consistent assessment of samples and components in industrial or laboratory environments. Stable column mount improves repeatability and ergonomics A monitor supplied with a column mount enables exact positioning and simple vertical adjustment, which supports repeatability across inspection sessions. Stable fixation reduces accidental movement and helps maintain a constant viewing angle during measurements or demonstrations. Ergonomic placement of the display can lower operator fatigue and standardise procedures, making the accessory suitable for quality-control benches where reproducible visual conditions are essential. Compact footprint for simple integration into inspection workflows Designed as a dedicated accessory for inspection equipment, the screen offers a compact footprint that fits crowded workstations and small laboratories. Being compatible with MZ.4710, the monitor integrates with existing setups without extensive reconfiguration, allowing quick set-up on stands or benches. The restrained dimensions make it easier to position alongside tools, microscopes or measurement instruments while keeping the display within the operator’s optimal field of view. Proven supplier quality and practical availability for workshops Supplied by a recognised microscopy brand, this screen functions as a reliable accessory for visual inspection tasks and bench-top applications. Metav Werkzeuge’s philosophy of democratising precision ensures that products are selected for dependable performance and broad accessibility. The combination of established supplier quality and Metav’s logistics and product range supports consistent supply and compatibility for industrial customers and trade professionals. Contact Metav Werkzeuge for advice on integrating the Euromex MZ.4712 monitor into inspection equipment and arrange delivery from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: MZ.4712 Description: 11-inch HD screen for MZ.4710 including column mount Product type: Screen / Computer accessory Brand: Euromex Facts Screen diagonal: 11 inches Special features Includes column mount Compatible with MZ.4710 Intended for laboratory and workshop inspection setups HD display FAQ Is this monitor compatible with the MZ.4710 microscope? The monitor is supplied specifically for integration with the MZ.4710 and is identified as an accessory for that model, enabling straightforward attachment and use. What is the visible screen size of the monitor? The accessory provides an 11-inch HD display, offering a compact viewing area suitable for bench-top inspection and documentation. Does the delivery include a mount for bench or column fixing? Yes, the product description specifies that the screen is supplied including a column mount for secure and repeatable positioning. Who manufactures this screen and accessory? The screen is a Euromex accessory and is distributed under that brand for microscopy and inspection applications. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
12 mm 20× HWF Eyepiece Pair for NexiusZoom, Wide Field - Euromex
Take advantage of precise, high-magnification inspection with a wide visual field and ergonomic HWF design for reduced eye strain; order the Euromex pair HWF eyepieces 20×/12 mm for NexiusZoom directly via Metav Werkzeuge or ask our consultants for application advice. Euromex pair HWF eyepieces 20×/12 mm for NexiusZoom — 20× magnification, 12 mm field number A pair of HWF eyepieces 20×/12 mm for NexiusZoom designed to deliver high-magnification observation for routine laboratory inspection and quality control tasks. High 20× magnification Wide 12 mm field of view Ergonomic HWF design for comfort Compatible with NexiusZoom series Greater detail with reliable optics The 20× magnification of these eyepieces increases the apparent size of small structures, enabling more precise visual inspection and quicker detection of defects. Combined with the 12 mm field number, the result is a wide field that balances magnification and context: more of the specimen remains visible without frequent repositioning. This balance improves throughput in repetitive tasks and reduces the time required for initial assessments, while the optical design maintains contrast and image clarity for consistent evaluation. Comfortable viewing for extended sessions The HWF eyepieces are optimised for comfortable viewing, offering an eyepoint and geometry that reduce eye fatigue during long inspection cycles. Ergonomic design features support natural head posture and help maintain a stable viewing position, which is especially beneficial during continuous measurements or documentation work. Compatibility with both standard and ESD variants of the NexiusZoom series ensures that these optics integrate smoothly into environments where electrostatic discharge protection is required. Practical integration into inspection workflows These eyepieces are supplied as a matched pair and are straightforward to install on compatible zoom microscope heads, improving consistency between stereo channels and simplifying calibration. The optical terms used—magnification and field number—translate directly into measurable benefits: higher enlargement for finer detail and a larger field for better situational awareness. The combination of performance and mechanical compatibility supports reliable daily use in laboratories, inspection benches and quality-control stations where consistent visual results are essential. Contact Metav Werkzeuge today to source the Euromex HWF eyepieces (NZ.6020) for NexiusZoom and secure tailored advice from our specialists in Emmerich to match the optics to the application Technical Data Article number: NZ.6020 Label: Pair HWF eyepieces 20×/12 mm for NexiusZoom Manufacturer: Euromex Product type: Eyepiece pair Core specifications Magnification: 20× Field number: 12 mm Eyepieces: 2 Compatibility & features Type: HWF eyepieces Compatible with: NexiusZoom, NexiusZoom ESD Cross-selling SKUs: NZ.1902-A; NZ.1902-AP; NZ.1902-B; NZ.1902-B-ESD; NZ.1902-P; NZ.1902-P-ESD; NZ.1902-PG; NZ.1902-S; NZ.1902-S-ESD; NZ.1902-U; NZ.1902-U-ESD; NZ.1903-A; NZ.1903-AP; NZ.1903-B; NZ.1903-B-ESD; NZ.1903-M; NZ.1903-P; NZ.1903-P-ESD; NZ.1903-PG; NZ.1903-S; NZ.1903-S-ESD; NZ.1903-U; NZ.1903-U-ESD; NZ.5302; NZ.5303 FAQ What magnification do these eyepieces provide? The eyepiece pair offers 20× magnification, providing enlarged observation for detailed inspection when used with compatible zoom objectives. How large is the visible field with these eyepieces? The eyepieces have a 12 mm field number, which delivers a relatively wide visible field at high magnification to reduce the need for frequent repositioning. Are these eyepieces compatible with ESD-protected microscopes? Yes, the eyepieces are compatible with the NexiusZoom series and the NexiusZoom ESD variant for use in electrostatic-sensitive environments. Can these eyepieces be used for prolonged inspection sessions? The HWF design is intended for comfortable viewing and supports extended use by reducing eye strain through optimised eyepoint and geometry. What is the SKU for ordering or cross-reference? The product is listed as NZ.6020 and can be referenced when enquiring about the Euromex HWF eyepieces for NexiusZoom. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.0 MP Digital USB-2 Colour Camera 1/2.3" CMOS, 12.0 Megapixel - Euromex
High-resolution colour capture combined with a compact 1/2.3‑inch CMOS sensor and straightforward USB‑2 connectivity delivers dependable documentation for routine microscopy tasks; order via Metav Werkzeuge or request compatibility advice from our consultants. CMEX-12f 12.0 MP Colour USB‑2 Camera — Digital microscope camera by Euromex CMEX-12f is a compact digital camera for microscopes, engineered for high-resolution colour documentation in laboratories, teaching and quality assurance. 12.0 MP colour imaging 1/2.3 inch CMOS sensor USB‑2 connectivity for PCs Designed for microscopy documentation Consistent, high-detail imaging for routine analysis The 12.0 MP resolution combined with a 1/2.3 inch CMOS sensor provides a balance of image detail and manageable file sizes, enabling clear visual records without excessive data handling. This configuration supports documentation, simple measurements and visual inspection workflows where repeatability matters. The sensor’s characteristics promote accurate colour rendering and fine detail capture, which reduces the need for repeated imaging and speeds up throughput in busy labs and teaching rooms. Straightforward connectivity and workflow compatibility A USB‑2 interface ensures direct connection to most desktop PCs and capture systems commonly used in educational and industrial settings. The camera is suitable for integration into established imaging setups and basic capture software, facilitating rapid image transfer for lab reports and digital archives. This practical connectivity supports efficient data handling and reduces setup time, so microscope-based tasks proceed with minimal interruption to standard processes. Built for documentation, education and audit trails Engineered as a microscopy documentation tool, the device is well suited to classrooms, inspection benches and bench-top laboratories that require reliable visual records. The camera’s colour fidelity and resolution help preserve sample detail for later review, presentation or audit. For users seeking cost-effective imaging without complex system requirements, this camera offers a robust compromise between performance and simplicity, backed by a supplier network experienced in microscopy solutions. For tailored advice on the CMEX-12f and to confirm availability, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our Emmerich team will advise on compatibility and delivery. Technical Data Article number: DC.12000f Product: CMEX-12f 12.0 MP digital USB-2 colour camera Category: Digital camera / digital microscope Manufacturer: Euromex Core specifications Resolution: 12.0 MP Sensor format: 1/2.3 inch Interface: USB-2 Features / Applications Sensor type: CMOS Colour imaging for documentation Suitable for microscopy imaging and teaching Ideal for routine documentation and quality control FAQ What resolution does the camera deliver? The camera delivers 12.0 MP resolution, suitable for detailed visual records and documentation with the CMEX-12f digital microscope camera (SKU DC.12000f) from Euromex. Which sensor type is used and what does it mean for image quality? The device uses a CMOS sensor in a 1/2.3 inch format; this sensor type provides a good compromise of sensitivity and detail for routine laboratory and teaching imaging. Is the camera compatible with standard PCs? Yes; the CMEX-12f connects via a USB‑2 interface, enabling straightforward attachment to most desktop PCs and capture setups commonly used in laboratories. Can the camera be used for measurement and documentation tasks? The camera is designed for microscopy documentation and supports visual inspection, presentation and basic measurement workflows when combined with appropriate capture software. Who supplies and supports this camera in Europe? Euromex supplies the camera, and Metav Werkzeuge can provide purchase and compatibility advice for integration into existing microscopy setups. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
12.1in LaboPad Tablet With 12 MP Microscope USB-2 Camera, 12.0 MP Resolution - Euromex
Take advantage of the combination of an integrated tablet display and a high‑resolution microscope camera for fast, reliable inspections and documentation. Order directly via Metav Werkzeuge or consult the Metav team for tailored advice. LaboPad-12 — 12.1‑inch tablet with 12.0 MP microscope camera (Euromex) The LaboPad-12 is an all‑in‑one digital microscope tablet designed for immediate visual inspections and documentation in workshops, education and light production environments 12.1-inch integrated tablet display 12.0 MP microscope camera sensor USB‑2 interface for broad compatibility Portable all-in-one digital inspection station Faster inspection with a built‑in large display The 12.1-inch integrated tablet turns the microscope into a ready-to-use inspection station without a separate computer. Large, clear imaging reduces the need to squint at eyepieces and speeds up decision cycles in quality checks. An on‑device display allows instant comparison of parts and faster documentation workflows, which supports measurable efficiency improvements in routine checks and training sessions. The compact footprint keeps bench space free while maintaining clear visual feedback for repetitive tasks. High detail capture and straightforward connectivity A 12.0 MP sensor provides detailed still images suitable for documentation, visual measurement and defect analysis; larger pixel counts translate into clearer crop and zoom results for small features. The USB‑2 connection offers broad compatibility with existing PCs and laptops as a standard interface, simplifying integration into established workflows. For customers unfamiliar with imaging terminology: megapixels indicate image resolution and USB‑2 denotes a widely supported physical connection rather than an indicator of image quality itself. The result is reliable image capture for records and reports. Practical uses across workshop, education and inspection This tablet microscope functions as a portable, all-in-one station for a range of tasks: component and solder joint inspection, surface defect checks, teaching demonstrations and simple quality assurance procedures. The combination of a large display and a high‑resolution sensor helps present findings clearly to colleagues or trainees and supports reproducible visual checks in small series production. The device is particularly suited to teams that require immediate results without complex setup or additional peripherals. Contact Metav Werkzeuge GmbH in Emmerich for personalised advice on integrating the LaboPad-12 into existing inspection routines – call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: LP.12000f Model series: LaboPad Product type: Digital camera / digital microscope Manufacturer: Euromex Facts Resolution: 12.0 MP Screen diagonal: 12.1 inches Camera interface: USB‑2 Special features Integrated tablet display All-in-one inspection station 12 MP microscope camera sensor USB‑2 connectivity FAQ What kind of images does the device capture? The LaboPad-12 captures high‑resolution still images at 12.0 MP, suitable for detailed visual inspection and documentation in reports and training materials. Is the tablet compatible with standard PCs? The USB‑2 interface enables broad compatibility with many PCs and laptops; actual plug‑and‑play behaviour depends on the host operating system and available drivers. Can the system be used in education and training? Yes, the large integrated display and clear imaging make the tablet ideal for demonstrations, student observation and guided practical sessions in technical teaching environments. Is the LaboPad-12 suited for production quality checks? The LaboPad-12 functions well for visual quality assurance tasks such as surface inspection and component checks where high‑resolution documentation and rapid review are required. Which industries benefit most from this all‑in‑one device? Workshops, small manufacturing lines, electronics repair and vocational training centres benefit from the portable inspection capabilities and straightforward setup. Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
12.1in LaboPad-5 Digital Microscope Tablet 5.0 MP USB-2 Camera - Euromex
Take advantage of the blend of a large 12.1-inch integrated display and a 5.0 MP microscope camera for quick visual inspection and reliable documentation. The tablet-based format with a USB 2.0 interface streamlines imaging tasks and reduces the need for additional hardware; order directly via Metav Werkzeuge or contact their consultants for tailored advice. LaboPad-5 — tablet-integrated digital microscope with 12.1-inch display & 5.0 MP camera (Euromex) The LaboPad-5 is a compact tablet-based digital microscope solution that combines a generous display with a high-resolution 5.0 MP imaging sensor for inspection, education and light laboratory work 12.1-inch integrated display for clear viewing 5.0 MP microscope camera for detailed images USB 2.0 interface for standard connectivity Tablet-based workflow for immediate documentation Clear, large display for efficient inspection and documentation The integrated 12.1-inch display delivers a noticeably larger working image than typical handheld viewers, which supports faster visual assessment and reduces eye strain during extended use. The screen size benefits routine quality checks and training sessions by presenting a high-resolution live image that simplifies measurement orientation and immediate decision-making. As a tablet-based instrument, the system reduces setup time and the need for a separate monitor, improving throughput in small labs and classrooms. High-resolution imaging made accessible for routine analysis A 5.0 MP microscope camera provides sharp still images that reveal surface details and contrast necessary for basic material inspection. The camera’s resolution permits clearer documentation of defects and features than lower-megapixel alternatives, making record keeping and reporting more precise. The imaging module is suited to capturing inspection photos for traceable archives; for advanced image processing or specialised metrology, supplementary software options can be discussed to match specific requirements. Reliable, standardised connectivity for effortless integration The device incorporates a USB 2.0 interface, enabling straightforward connection to common laboratory computers and networked workstations without specialised ports. USB 2.0 supports stable transfer of high-quality still images and typical live-view tasks; this standard connection helps integrate the instrument into existing workflows and simplifies data transfer to archive systems. The compact system design minimises peripheral needs, facilitating use in training rooms, service benches and small production cells. Suitable for education, inspection and light laboratory tasks Designed as an accessible digital microscope solution, the system assists in visual teaching, rapid inspection and documentation tasks where a balance of image quality and simplicity is required. The tablet format encourages immediate feedback during demonstrations and short inspection routines, while the 5.0 MP sensor supports detailed photographic records. For installations where continuous high-frame-rate video or advanced metrology is necessary, technical consultation is recommended to verify compatibility with specific procedures. Contact Metav Werkzeuge for personalised advice and reliable supply from Emmerich — experts will help match this Euromex tablet microscope system to the intended application and delivery requirements Technical Data Article number: LP.5000f Product name: LaboPad-5 mit 12.1 Zoll Tablet mit 5.0 MP Mikroskop USB-2 Kamera SKU: LP.5000f Facts Resolution: 5.0 MP Display diagonal: 12.1 inches Camera interface: USB 2.0 Special features Model series: LaboPad Product type: Digital camera / digital microscope Manufacturer: Euromex FAQ What image quality can be expected from this tablet microscope? The LaboPad-5 offers a 5.0 MP camera module that produces detailed still images suitable for inspection and documentation; the result is well suited to education and routine quality checks. Is the unit compatible with standard computers? Yes, the system uses a USB 2.0 interface, allowing connection to most lab PCs and workstations for image transfer and basic archiving tasks. Can the device be used for classroom demonstrations? The large 12.1-inch integrated display and tablet format make the system particularly convenient for demonstrations and group viewing during training sessions. Does the LaboPad-5 support advanced metrology or high-speed video capture? The instrument is intended for inspection, education and documentation; specialised metrology or high-frame-rate video requirements should be discussed to confirm suitability. Where can more technical details or compatibility advice be obtained? Technical and application questions about the LaboPad-5 can be directed to Metav Werkzeuge, who can advise on integration and supply options. Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
12.1in Tablet Digital Microscope 2.0MP USB-2 Camera, 12.1in Display - Euromex
Take advantage of the integrated 12.1-inch tablet and the 2.0 MP microscope camera for immediate visual documentation and streamlined classroom or laboratory workflows. Order the unit directly via Metav Werkzeuge or consult our advisors for application-specific guidance. LaboPad-2 — Digital microscope camera with 12.1-inch tablet and 2.0 MP sensor (Euromex) The LaboPad-2 is a compact digital microscope camera system with an integrated 12.1-inch tablet, designed for straightforward visualisation and documentation in teaching, routine inspection and laboratory environments 12.1-inch integrated tablet display 2.0 MP microscope camera sensor USB-2 connection for easy data transfer Ideal for classroom and lab documentation Faster documentation with reliable image quality The combination of a 2.0 MP sensor and an integrated tablet delivers clear images for routine documentation and reporting. A 2.0-megapixel camera captures sufficient detail for general inspection tasks, educational demonstrations and non-critical quality checks; pixel count here indicates the image resolution rather than optical magnification. The result is a dependable visual record that reduces the time spent on image capture and basic archiving, helping to increase throughput in busy teaching labs or production benches. Large screen for group viewing and efficient workflows A 12.1-inch display provides a generous viewing area that supports collaborative work and immediate assessment. The sizeable screen eliminates the need for separate monitors during demonstrations, enabling a whole class or a small team to view the specimen at once. This direct visual access improves decision-making speed and simplifies training scenarios, so small teams can discuss findings without having to transfer files to additional devices. Simple connectivity that fits existing setups Equipped with a USB-2 interface, the system integrates smoothly into standard IT environments and laboratory workstations. USB-2 ensures a stable connection to PCs and peripherals for image transfer and peripheral control without complex setup. For facilities that prioritise uncomplicated operation and compatibility over high-speed data transfer, this connection type offers predictable, low-friction integration into established workflows. Practical design for education and routine inspection The unit is presented as a ready-to-use digital microscope camera with an integrated tablet, making it particularly suited to schools, vocational training and routine laboratory inspection where ease of use and immediacy matter more than ultra-high resolution. The form factor reduces the number of separate devices required, simplifying handling and storage while supporting consistent visual documentation practices across multiple users and shifts. For classroom-ready imaging and reliable documentation from Euromex, contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: LP.2000f Label: LaboPad-2 with 12.1-inch tablet and 2.0 MP microscope USB-2 camera Brand: Euromex Product type: Digital camera / digital microscope Model series: LaboPad Facts Resolution: 2.0 MP Screen diagonal: 12.1 inches Special features USB-2 camera interface Integrated 12.1-inch tablet display Suitable for classroom and laboratory documentation Compact digital microscope camera design FAQ What image resolution does the system provide? The unit delivers a 2.0 MP image sensor, which is suitable for clear visual documentation and teaching demonstrations with the LaboPad-2 digital microscope camera. How does the device connect to other equipment? Connection is via USB-2, offering a stable and widely compatible interface for image transfer and integration with standard PCs and peripherals. Is the system suitable for classroom demonstrations? Yes, the integrated 12.1-inch tablet display makes the device well suited to classroom and training environments, supporting group viewing and immediate discussion. Can the unit be used for routine inspection in a workshop or lab? The LaboPad-2 is designed for routine inspection tasks and documentation workflows where ease of use and quick visual records are the priority rather than ultra-high-resolution imaging. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com
12.5x/17.5mm Widefield Eyepiece Ø30mm Tubus, 17.5mm Field - Euromex
Take advantage of a precise optical upgrade that combines a wide-field optical design with reliable compatibility for Delphi‑X Inverso microscopes; this eyepiece delivers a broader observation area and straightforward integration. Order the component directly via Metav Werkzeuge or consult our specialists for alignment and selection advice. Wide-field WF eyepiece — 12.5× magnification, 17.5 mm field number — Euromex Delphi‑X Inverso A wide-field WF eyepiece designed for Delphi‑X Inverso microscopes with a Ø 30 mm tube, optimised to expand the effective field of view for inspection and documentation tasks. Wide-field WF optical design 12.5× magnification, intermediate power 17.5 mm field number for broader view Compatible with Ø 30 mm microscope tube Broader visual field for faster inspection and analysis The wide-field optical concept provides a noticeably larger apparent view compared with standard eyepieces, which reduces the need for frequent stage movement during inspection. By increasing the usable visual area, this eyepiece enables more efficient scanning of specimens and components, translating into faster throughput in routine checks. The design maintains sharpness across the field, so critical details remain visible towards the edge — a practical advantage for quality control and metallographic review tasks. The combination of a wide-field eyepiece and controlled optical correction reduces operator fatigue during extended use. Optical compatibility and what the specifications mean in practice Built to fit a Ø 30 mm tube and matched to the Delphi‑X Inverso series, the eyepiece ensures mechanical and optical alignment without additional adapters. The stated 17.5 mm field number describes the diameter of the image circle produced by the eyepiece and directly determines how much of the specimen can be seen at once; a larger field number means more area is visible. The intermediate power level supports both detail work and overview inspection, making the component a versatile choice for microscopy benches that handle diverse tasks from solder inspection to biological sample screening. Durability and routine use in workshop and laboratory environments Constructed to industrial standards expected from Euromex optics, the ocular combines robust mechanical tolerances with simple handling. The wide-field design is compatible with common microscope photo and observation setups used in workshops and teaching labs, and it integrates into existing instrument chains without compromising calibration. Reduced handling and the wider view contribute to fewer retakes during imaging workflows, which supports operational efficiency and repeatable results. Practical guidance for selection and deployment For installations into an existing Delphi‑X Inverso system, confirm the tube diameter and the eyepiece seating to ensure optimal image plane alignment. If additional optical matching is required for camera coupling or specialised illumination, Metav Werkzeuge consultants can advise on adapters and configuration options. The eyepiece complements inspection rigs where a balance between magnification and viewing area is a priority, particularly in quality assurance and component evaluation settings. Contact Metav Werkzeuge for tailored advice on integrating this Euromex wide-field eyepiece into existing workflows and to verify compatibility with specific Delphi‑X Inverso setups Technical Data Article number: DI.6012 Label: Wide-field WF 12.5× / 17.5 mm eyepiece for Ø 30 mm tube for Delphi‑X Inverso Manufacturer: Euromex Product type: Eyepiece Model series: Delphi‑X Inverso Facts Magnification: 12.5× Field number: 17.5 mm Tube compatibility: Ø 30 mm Special features Wide-field (WF) design Designed for Delphi‑X Inverso series Ocular type: WF eyepiece FAQ What is the main advantage of a wide-field eyepiece? A wide-field eyepiece provides a larger apparent field of view; the Euromex WF eyepiece expands the observable area, reducing stage movement and increasing inspection speed. Will this eyepiece fit my Delphi‑X Inverso microscope? Yes, the eyepiece is specified for a Ø 30 mm tube and is compatible with the Delphi‑X Inverso model series when standard eyetube dimensions are used. How does the 17.5 mm field number affect observation? The 17.5 mm field number determines the diameter of the usable image circle; a larger value means more of the specimen is visible at once with the same magnification. Is the magnification suitable for both overview and detail work? The twelve-and-a-half-fold magnification provides an intermediate power level that balances overall view and detail, making it suitable for many inspection and laboratory tasks. What should be checked before installation? Confirm the tube internal diameter and seating for the eyepiece; ensure the Delphi‑X Inverso optical train is correctly aligned for best results. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands, info@euromex.com
120 x 78 mm Mechanical X-Y Stage Precision Stage for Inverted Microscopes, Metal Construction - Euromex
Taking advantage of a compact mechanical X–Y stage with precise manual control and a 120 x 78 mm travel area ensures reliable slide positioning and straightforward integration into Oxion Inverso systems; order the stage directly via Metav Werkzeuge or consult the team for tailored advice. OX.9500 Mechanical X–Y Stage for Oxion Inverso – 120 x 78 mm, mechanical control (Euromex) OX.9500 is a mechanical microscope stage designed for inverted applications, delivering smooth manual positioning for routine and demanding sample work Precision mechanical X–Y movement Stage platform 120 x 78 mm Compatible with Oxion Inverso series Robust manual control knobs Smooth, accurate positioning for everyday microscopy The mechanical X–Y stage combines a compact footprint with precise adjustment mechanics to enable consistent sample alignment. The 120 x 78 mm platform provides sufficient room for standard slides and small specimens while keeping the optical path unobstructed. The solid mechanical controls translate fine knob rotations into predictable motion, which reduces the need for repeat repositioning and shortens inspection cycles. For laboratories and workshops that prioritise reproducible measurements, the stage’s precision movement supports high repeatability when focusing and navigating samples, making manual tasks more efficient and less error-prone. Easy integration with inverted optics and robust manual handling Designed specifically for the Oxion Inverso series, the table interfaces with inverted microscope stands without requiring complex modifications. The mechanical drive system is engineered for long-term reliability and straightforward maintenance, meaning fewer service interventions and lower downtime. The stage’s construction ensures stable sample support during handling and coarse adjustments, while the fine control allows delicate centring of regions of interest. This combination of compatibility and durability suits educational labs, routine inspection benches and production control stations where dependable manual operation is essential. Practical procurement and quality assurance for peace of mind Sourcing the stage through Metav Werkzeuge aligns with a supply chain focused on availability and verified quality. The product is a clear choice where functional reliability and simple, mechanical operation are preferred over electronic complexity. The robust mechanical design reduces the risk of unexpected failures and simplifies replacement parts management. For buyers seeking a compact, serviceable stage that integrates with inverted microscopes, this solution balances practical workshop needs with the high standards expected in precision microscopy. Contact Metav Werkzeuge today to discuss compatibility and ordering for the Euromex OX.9500 mechanical X–Y stage and benefit from expert guidance and dependable delivery from Emmerich. Technical data Article number: OX.9500 Brand: Euromex Product type: Microscope stage (mechanical X–Y) Model series: Oxion Inverso Platform size: 120 x 78 mm Core specifications Travel area: 120 x 78 mm Drive type: Mechanical X–Y control Compatibility: Oxion Inverso inverted microscopes SKU / UID: OX.9500 / OX.9500 Special features Manual fine and coarse adjustment knobs Compact footprint for inverted stands Solid construction for routine use Suitable for standard slides and small specimens FAQ What compatibility can be expected with Oxion Inverso microscopes? The OX.9500 stage is built for direct compatibility with the Oxion Inverso series; the mechanical interfaces and plate dimensions match the inverted stands for straightforward installation. Is the stage suitable for precision measurements and repeated positioning? Yes, the mechanical X–Y movement on the OX.9500 offers reliable repeatability and fine control, making it appropriate for inspection tasks that require consistent sample positioning. Can the mechanical stage support non-standard specimens or larger sample holders? The 120 x 78 mm platform on the OX.9500 accommodates standard slides and many small specimens; for larger holders, check the mounting envelope of the Oxion Inverso stand to ensure clearance. Does the product include any electronic components that require power? No electronic components are part of the OX.9500 mechanical stage; operation relies entirely on manual mechanical controls. How does the stage improve workflow on an inverted microscope? By providing smooth manual translation and a stable platform, the OX.9500 reduces time spent searching for regions of interest and decreases repositioning errors, which streamlines routine inspection and documentation. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com
126mm Plan Apochromatic Common Main Objective, 0.5x Magnification - Euromex
Combine the plan apochromatic optical correction with 0.5× magnification and a 126 mm working distance for precise, low-magnification inspection of large or fixtured parts; order the Euromex objective via Metav Werkzeuge or consult our specialists for integration advice. Plan apochromatic 0.5× common main objective for DZ-series (Objective, 126 mm working distance) – Euromex The Plan apochromatic 0.5× common main objective for DZ-series is a low-magnification, highly corrected objective intended for industrial and laboratory microscopes that require a long 126 mm working distance for handling fixtured components. Plan apochromatic correction 0.5× low magnification for wide field 126 mm long working distance Designed for DZ-series microscopes Wider field for fast visual inspection and assembly A 0.5× objective increases the field of view, enabling faster visual inspection and assembly tasks without sacrificing image integrity. The larger image area reduces stage moves and accelerates throughput in production environments, while the plan apochromatic design maintains edge-to-edge sharpness. This means fewer manual adjustments and more consistent results when inspecting larger components or multi-part assemblies. High optical correction for reliable measurement and documentation The plan apochromatic correction addresses chromatic and spherical aberrations across the whole image plane, so colours remain true and fine details stay sharp. For basic metrology and visual documentation, this leads to improved repeatability and clearer photographic records. The optical correction reduces the need for post-processing and supports more reliable comparisons between images taken under different conditions. Long working distance for real-world industrial setups A 126 mm working distance provides substantial clearance between the sample and the objective, allowing for tools, probes and fixtures to be used beneath the lens without risk of collision. This clearance is particularly beneficial for inspection of assembled parts, soldered electronics and components mounted in jigs. The long working distance therefore supports safer handling and easier integration into bench-top production and quality-control stations. Robust compatibility and integration into inspection systems Designed as a common main objective for the DZ-series, this lens integrates smoothly into existing Euromex DZ microscope heads and compatible optical systems. The objective’s specification simplifies part selection and reduces setup complexity when replacing or upgrading optics. Its compatibility with a range of DZ-system accessories supports modular workflows in both laboratory and industrial environments. For precise, long-working-distance inspections select the Euromex plan apochromatic 0.5× main objective and contact Metav Werkzeuge for customised advice and prompt supply from Emmerich. Technical data Article number: DZ.4005 Product: Objective / Lens Model series: DZ-series Brand: Euromex Core specifications Magnification: 0.5× Working distance: 126 mm Compatibility & features Plan apochromatic objective Common main objective for DZ-series Cross-sale: DZ.1100; DZ.1105; DZ.1600; DZ.1605; DZ.1800; DZ.1805 FAQ What optical advantages does a plan apochromatic objective provide? The plan apochromatic correction delivers reduced chromatic and spherical aberration across the field, so images from the Euromex objective remain sharp and colour-accurate for reliable inspection and documentation. Is the long working distance suitable for fixtures and probes? Yes, the 126 mm working distance of the Euromex objective offers substantial clearance for fixturing, probes and tool access beneath the lens without risking contact. Can this objective be used for basic measurements and photographic records? The high correction and flat field of the Euromex 0.5× objective support consistent visual measurement and photography, improving repeatability for routine metrology tasks. Which microscope systems is this objective compatible with? This objective is designed as the common main lens for the DZ-series and integrates directly with compatible DZ optical heads and accessories. Are there recommended accessories to pair with this objective? Pairs commonly include DZ-series eyepieces and camera adapters; compatible SKUs listed include DZ.1100, DZ.1105, DZ.1600, DZ.1605, DZ.1800 and DZ.1805 for various system configurations. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
1280×1080 2.0MP High-Speed HD Colour Camera Standalone With 4GB SD HDMI Output - Euromex
The compact design and HD functionality combine to deliver clear inspection images, fast live view and convenient standalone recording; the integrated mouse-controlled software and HDMI output ensure quick integration into inspection benches. Order the VC.3024-HDS directly via Metav Werkzeuge or request a technical consultation from the Metav team. VC.3024-HDS — HD mini camera for digital microscopes, 2 MP with HDMI output A VC.3024-HDS is a high-speed, colour digital camera for microscope inspection and documentation, featuring an integrated HD screen and standalone recording via SD card. High-resolution 2 MP sensor for clear imaging Standalone recording with 4 GB SD card HDMI output for direct live display Integrated mouse-controlled recording software Precise images for routine inspection and documentation The 2 MP sensor with a native resolution of 1280 × 1080 delivers high-detail colour images suitable for visual inspection, documentation and basic measurement tasks. The relatively high pixel count paired with a high-speed capture capability reduces motion blur during live observation, which supports consistent visual assessment in production control and laboratory routines. Clear image reproduction shortens evaluation cycles and helps maintain traceable records of inspection outcomes. Standalone capture that simplifies workflow Equipped for standalone recording, the unit accepts a 4 GB SD card for direct image and video storage without a permanent PC connection. Recording and playback are operated via the integrated mouse-controlled recording software, enabling fast capture and easy review at the bench. The built-in HD screen offers immediate visual feedback, so captured sequences can be reviewed on site. This configuration reduces setup complexity and speeds up routine documentation tasks in quality control and education environments. Direct integration with monitors and microscopes With an HDMI interface the camera provides a stable live view feed to any compatible monitor or capture device, facilitating seamless integration into existing inspection stations and microscopes. As a compact digital microscope camera, it supports real-time observation on larger displays for group inspection, teaching or collaborative quality checks. The straightforward interface minimises downtime during installation and helps to standardise visual inspection across multiple workstations. Consistent supply and expert backing for long-term use The camera is designed for reliable everyday use in workshops, laboratories and technical education settings where repeatable inspection results are essential. Backed by Metav’s experience in precision equipment supply, the product benefits from a transparent supply chain and warehouse support in Emmerich. Metav’s market presence and wide product range aim to reduce procurement complexity and provide dependable availability for workshop essentials. Contact Metav Werkzeuge for a technical consultation or to request detailed datasheets and compatibility advice for the VC.3024-HDS, available from stock in Emmerich. Technical data Article number: VC.3024-HDS SKU / UID: VC.3024-HDS Manufacturer: Euromex Microscopen bv Facts Resolution (pixels): 1280 × 1080 Resolution (megapixel): 2.0 MP Interface: HDMI Special features Colour HD mini camera Integrated HD screen Standalone operation with SD card Includes mouse-controlled recording software High-speed capture for live inspection FAQ What image resolution does the VC.3024-HDS provide? The VC.3024-HDS produces images at a native resolution of 1280 × 1080 pixels (2.0 MP), suitable for routine inspection and documentation. Can the camera record without a PC connection? Yes, standalone recording is supported via a 4 GB SD card and the integrated mouse-controlled recording software included with the camera. Which output is available for live display? The unit offers an HDMI output for direct connection to monitors and capture devices for real-time live view. Is this camera compatible with microscopes? The VC.3024-HDS is designed as a compact digital camera for microscopes and inspection setups, providing live view and recording options for laboratory and workshop applications. Does the camera include any capture software? Yes, the camera includes integrated mouse-controlled recording software for straightforward capture and playback at the bench. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
128mm Additional 0.7x Lens Working Distance, Objective Lens - Euromex
Take advantage of the combination of a wider field of view and a long working distance to improve inspection speed and handling precision; benefit from a compact optical accessory from Euromex and order directly via Metav Werkzeuge or consult our specialists for model compatibility. Additional 0.7× Lens — Auxiliary Objective for Inspection with 128 mm Working Distance (Euromex) The Additional 0.7× Lens is an auxiliary objective designed to reduce magnification while maintaining a generous working distance, ideal for hands-on inspection and assembly under magnification. 0.7× magnification reduction for larger field of view Extended working distance of 128 mm for easier handling Designed for Euromex optical systems Compact, lightweight optical attachment Inspect larger areas with controlled magnification and space to work The 0.7× auxiliary objective delivers a deliberate reduction in nominal magnification, which results in a substantially larger field of view without sacrificing core image clarity. With a working distance of 128 mm, operators benefit from additional space between the lens and the specimen, enabling precise manipulation, tool access and easier component placement during inspection or assembly. The optical adaptation reduces the need for frequent stage movement, which streamlines workflows and shortens inspection cycles. Integrates into optical setups while preserving image performance Engineered as an auxiliary lens for Euromex optical assemblies, the unit is intended to be fitted where a lower magnification and longer working distance are required. The adapter nature of this component means it modifies the overall optical train to prioritise overview and accessibility. For users with mixed equipment, compatibility checks are recommended to confirm mechanical mount and parfocality; Metav Werkzeuge can advise on integration and matching to existing microscopes or stereomicroscopes. Practical benefits for workshop and bench inspection tasks By trading some magnification for a wider viewing area and increased clearance, this lens reduces the risk of accidental contact between tools and optics, which is especially valuable in repetitive production inspection or delicate repair tasks. The accessory supports faster orientation of components and reduces handling errors, contributing to improved throughput and consistent quality control. The unit’s compact form factor keeps the optical path simple and unobtrusive on a busy workbench. Simple upkeep keeps optics reliable over time Routine care — dust-free storage, lens cleaning with appropriate solvent and microfibre wipes, and careful mounting — preserves the optical quality and extends service life. The design aims for straightforward assembly and minimal adjustment after fitting; periodic inspection of seating and cleanliness maintains stable imaging performance and reliable repeatability for measurement and visual inspection tasks. Contact Metav Werkzeuge for precise fitment advice and to order the Euromex Additional 0.7× Lens (MZ.4627) for enhanced inspection clearance and operational ease; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MZ.4627 Label: Additional 0.7x Linse Arbeitsabstand 128 mm Manufacturer: Euromex Facts Working distance: 128 mm Magnification factor: 0.7× Special features Type: Auxiliary objective / lens Product type: Objektiv / Linse Brand: Euromex FAQ What change in magnification does the lens provide? The Euromex Additional 0.7× Lens reduces nominal magnification to 0.7×, increasing the observable area for inspection tasks. Will the lens give more room for hands and tools during inspection? Yes; the specified working distance of 128 mm creates additional clearance, making tool access and manipulation easier while inspecting components. Is this lens suitable for Euromex microscopes only? The accessory is designed for Euromex optical systems; compatibility with other microscopes depends on mechanical mount and optical coupling, so confirm fitment before purchase. How should the lens be cleaned and stored? Clean with a microfibre cloth and appropriate optical cleaner, avoid abrasive materials, and store in a dust-free container to maintain image quality. What is the SKU for ordering and reference? The product is listed as MZ.4627 — Euromex Additional 0.7× Lens. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
12mm 15x Widefield Eyepiece Pair WF, 12mm Field - Euromex
Take advantage of the combination of wide-field optics, precise 15× magnification and a 12 mm field number for faster visual inspection and reduced repositioning during routine work. Order the Pair WF 15x/12 mm eyepieces directly via Metav Werkzeuge or ask our consultants if needed. Euromex Pair WF 15x/12 mm Eyepieces — Wide-field optics for clearer, more efficient viewing Pair WF eyepieces for laboratory and educational microscopes, offering a wide apparent field for comfortable, context-rich observation Wide-field WF design for larger field of view 15× magnification for detailed observation 12 mm field number for broader image area Pair configuration for binocular heads Faster inspections through a larger visible area The wide-field design delivers a noticeably broader apparent field compared with standard eyepieces, which means fewer stage movements when scanning samples. With 15× magnification combined with a 12 mm field number, fine details remain visible while more of the specimen stays in view, improving efficiency during repetitive measurements and visual checks. The optics reduce the need for frequent refocusing and repositioning, enabling a smoother workflow in lab and educational settings. This results in time savings for routine tasks and less interruption to inspection cycles. Designed for straightforward integration and consistent results These WF eyepieces are supplied as a pair, matching the demands of binocular heads and ensuring symmetrical optical performance. The construction supports consistent image alignment across both channels, which helps to minimise visual fatigue during prolonged sessions. Basic optical terms: the field number indicates the diameter of the useful image circle (here 12 mm), and a larger value means more of the specimen is visible without moving the slide. Compatibility with standard eyetube dimensions is typical for this class of eyepiece, allowing easy replacement or upgrade of existing microscope heads without complex adjustments. Comfortable viewing that supports careful analysis A wider field and balanced magnification improve observation comfort, particularly during extended examinations or teaching demonstrations. The combination of magnification and field size encourages more natural eye movement and reduces strain when comparing features across a sample. Manufactured by Euromex, these eyepieces are intended as practical optical accessories that support reliable visual assessment rather than experimental imaging; they provide a clear improvement in day-to-day handling and visual ergonomics for technicians and students alike. Contact Metav Werkzeuge for tailored advice on integrating the Euromex WF eyepiece pair BE.6015 into existing microscope systems or for procurement and delivery from Emmerich Technical Data Article number / SKU: BE.6015 Label: Pair WF 15x/12 mm eyepieces Key Specifications Magnification: 15× Field number: 12 mm Eyepiece type: WF (wide-field) Features and Identifiers Manufacturer: Euromex Product type: Eyepiece Configuration: Pair UID: BE.6015 FAQ What magnification do these eyepieces provide? The Pair WF 15x/12 mm eyepieces deliver 15× magnification, offering a balance between detail and field of view for general laboratory observation. What does the 12 mm field number mean in practice? A 12 mm field number denotes the diameter of the usable image circle; in practical terms, it provides a wider visible area so less stage movement is required during specimen scanning. Are these eyepieces supplied as a matched set? Yes, the product is a pair, supplied to ensure matched optical performance for binocular microscope configurations and consistent visual alignment. Which brand manufactures these eyepieces? The eyepieces are produced by Euromex and are listed under SKU BE.6015, representing a standard accessory class for laboratory and educational use. Can these eyepieces improve comfort during long observation sessions? The wide apparent field together with moderate magnification is designed to reduce eye strain and improve observation comfort, making them suitable for extended use in routine inspection and teaching. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
12mm 20x Wide Field Eyepiece for 30mm Tube Delphi-X Inverso - Euromex
Take advantage of the 20× magnification and 12 mm field number to inspect fine detail with a noticeably wider field of view; the eyepiece is compatible with a Ø30 mm tube and the Delphi‑X Inverso series. Order this optic directly via Metav Werkzeuge or contact the consultants for tailored advice. Weitfeld WF 20×/12 mm eyepiece for Ø30 mm tube – Delphi‑X Inverso (Euromex) The Weitfeld WF 20×/12 mm eyepiece is a wide-field ocular designed to deliver high magnification and an expanded viewing area for microscopy tasks on the Delphi‑X Inverso series with a Ø30 mm tube Wide-field WF optics for extended view 20× magnification for detailed inspection 12 mm field number for broader field coverage Greater inspection precision with concentrated magnification The 20× magnification combines with a wide-field optical design to deliver a detailed image while preserving a substantial field of view. For tasks that demand close visual analysis—such as component inspection, fine assembly checks or material evaluation—the increased magnification enhances detection of small defects without sacrificing situational awareness. The eyepiece’s optical specification is a direct factor in faster decision-making during quality control, because finer details become discernible under the same working setup. Wider viewing area for more efficient workflows A 12 mm field number denotes the eyepiece’s apparent field diameter and translates to a visibly broader observation area at high magnification. In practice, this means fewer stage movements and a reduced need to reframe subjects, which can shorten inspection cycles and lower the risk of missing peripheral defects. The optical terms are straightforward: field number correlates to the usable visual area through the eyepiece, and a larger figure supports a more efficient visual workflow in laboratory and production environments. Clear compatibility and straightforward integration Engineered for a Ø30 mm tube, the ocular fits the Delphi‑X Inverso microscope series and integrates without adaptation when the correct tube diameter is present. The wide-field WF format maintains image uniformity across the view, preventing vignette effects that can hinder fast visual checks. This eyepiece is suitable for educational laboratories, industrial inspection benches and service facilities where a balance of high magnification and a broad observational window is needed for repetitive or prolonged inspection tasks. Practical use and procurement guidance As a single-component accessory, the eyepiece supports modular equipment strategies: it can be specified to complement existing microscope bodies or deployed as part of a standard configuration for new set-ups. Handling and maintenance remain straightforward—regular optical cleaning and careful mounting preserve performance—while the combination of 20× power and wide-field design yields a reliable optical upgrade for precision-focused environments. Metav’s offering philosophy emphasises dependable supply and technical clarity to support workshop and industrial buyers. For expert purchasing and supply of Euromex optics, contact Metav Werkzeuge for personalised consultancy and reliable delivery from Emmerich to the workbench. Technical data Article number: DI.6020 Label: Weitfeld WF 20×/12 mm eyepiece for Ø30 mm tube (Delphi‑X Inverso) Product type: Eyepiece Brand: Euromex Facts Magnification: 20× Field number: 12 mm Tube diameter compatibility: Ø30 mm Special features Wide-field (WF) optical design Compatible with Delphi‑X Inverso series Intended for microscopy observation FAQ What magnification does the eyepiece provide? The eyepiece delivers 20× magnification, allowing detailed visual inspection when used with a suitable microscope body. What does a 12 mm field number mean for inspection work? A 12 mm field number indicates a wider apparent field of view at the given magnification, reducing the need for frequent repositioning during inspection. Will the eyepiece fit any microscope? This eyepiece is designed for a Ø30 mm tube and is compatible with the Delphi‑X Inverso series; fitting to other microscopes requires the same tube diameter. Is this optic suitable for industrial quality control? Yes, the combination of 20× magnification and wide-field optics makes the eyepiece well suited to industrial inspection, component analysis and detailed assembly checks. Which brand manufactures this eyepiece? The eyepiece is produced by Euromex and supplied as part of optical accessories for the Delphi‑X Inverso microscopy range. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Nederland; info@euromex.com
12mm 20x Widefield Eyepiece for Ø30mm Tube, Delphi-X Observer - Euromex
Take advantage of the combination of wide-field optics, 20× magnification and a compact 30 mm tube fit for improved visual throughput in routine inspection tasks; secure consistent results by ordering through Metav Werkzeuge or consulting the technical team for application advice. Wide-field WF 20× / 12 mm eyepiece for Ø30 mm tube — Euromex Delphi‑X Observer Wide-field WF eyepiece for Ø30 mm tube (Delphi‑X Observer) that extends the observable field for more efficient visual inspection and documentation in laboratory and industrial settings Wide-field WF optics for greater field of view 20× magnification with 12 mm field number Compatible with Ø30 mm tube systems Broader view for faster, more reliable inspections The wide-field design expands the usable field of view, reducing the need for frequent stage movements and speeding up repetitive inspection tasks. Optimised geometry and a 12 mm field number allow operators to keep larger sample areas in view, which translates into fewer repositioning steps and a measurable gain in throughput. For industrial quality control and detailed laboratory observation alike, the improved coverage reduces inspection time while maintaining clarity, supporting a more efficient workflow and better decision-making. Optical performance that supports precise measurements With 20× magnification, the eyepiece delivers a high level of detail while preserving visual comfort for extended use. The optical formulation minimises peripheral distortion and keeps contrast high across the image, which helps when assessing fine surface features or reading scale marks on measuring stages. As an eyepiece engineered for the Delphi‑X Observer line, it pairs with standard objective assemblies to maintain accurate image scale and reproducible observation conditions—important when results are compared across shifts or between instruments. Easy integration and durable compatibility with existing systems Designed for a Ø30 mm tube mount, the ocular installs quickly into compatible observers and microscopes commonly used in routine inspection rigs. The straightforward mechanical interface reduces downtime during instrument set-up and ensures a secure fit for repeatable alignment. Built to match professional inspection environments, the eyepiece supports continuous use in workshop and laboratory contexts and integrates into established documentation routines, enabling faster handoffs between inspection, measurement and reporting steps. Contact Metav Werkzeuge for tailored advice on integrating the Euromex Delphi‑X Observer wide-field eyepiece into existing inspection systems, or request further technical details by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: DX.6020 Label: Wide-field WF 20×/12 mm eyepiece for Ø30 mm tube for Delphi‑X Observer Product type: Eyepiece Model series: Delphi‑X Observer Manufacturer: Euromex UID: DX.6020 Facts Magnification: 20× Field number: 12 mm Tube diameter: Ø 30 mm Eyepiece type: WF (wide-field) Special features Wide-field optics Compatibility with Delphi‑X Observer series Designed for routine inspection and documentation FAQ What magnification does this eyepiece provide? The eyepiece offers 20× magnification, providing enhanced detail for visual inspection and documentation with the Delphi‑X Observer. Is this ocular compatible with standard 30 mm tube mounts? Yes, the eyepiece is designed for a Ø30 mm tube and fits standard mounts used in the Delphi‑X Observer series. What advantage does the 12 mm field number bring? A 12 mm field number increases the observable area through the eyepiece, reducing stage movement and increasing inspection efficiency. Can this eyepiece be used for long inspection shifts? The wide-field design and optical optimisation support prolonged use by maintaining comfortable viewing and minimising peripheral distortion. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands, info@euromex.com
12mm 20× HWF Eyepiece With 10/100 Micrometer Scale And Reticle, Compatible With NexiusZoom - Euromex
Combine 20× magnification with an integrated 10/100 eyepiece micrometer and reticle for fast, traceable measurements; benefit from a robust HWF design and order the eyepiece directly via Metav Werkzeuge or consult our specialists for system integration. HWF eyepiece 20×/12 mm with eyepiece micrometer 10/100 and reticle (NZ.6020-CM) — Euromex measuring eyepiece for NexiusZoom HWF eyepiece with eyepiece micrometer and reticle designed for straightforward measurement tasks on stereo microscopes in quality control and production environments High wide-field HWF design 20× magnification precision 12 mm field number for wide view Integrated 10/100 eyepiece micrometer Reticle compatible with NexiusZoom Precise optical performance that speeds inspection The 20× magnification combined with a 12 mm field number delivers a wide, bright image that supports rapid visual assessment and micrometric measurement. The integrated eyepiece micrometer (10/100) converts visual graduations into reproducible measurement steps, reducing interpretation time during component inspection. For users who require repeatable measurement routines, the optical combination minimises the need for stage movements and accelerates throughput while maintaining traceable results. Designed for reliable measurement workflows Built as a measuring eyepiece for laboratory and workshop environments, the HWF design offers an enlarged field of view that improves sample orientation and reduces operator fatigue. The fixed reticle provides stable reference lines for alignment and quick dimensional checks, while the micrometer scale supports comparative measurements without additional software. Where series compatibility matters, the eyepiece is engineered for direct integration with the NexiusZoom and NexiusZoom ESD families, ensuring straightforward retrofitting into existing inspection benches. Practical handling and inspection benefits Optical clarity and mechanical simplicity translate into lower training requirements and consistent results across operators. The eyepiece’s configuration prioritises ergonomics and measurement clarity: a wide apparent field makes locating features faster, and the calibrated micrometer improves confidence in pass/fail decisions. For bench environments with mixed tasks, the eyepiece allows quick transitions between visual inspection and semi-quantitative checks, supporting a smoother production flow and fewer measurement backlogs. Where this eyepiece delivers most value The accessory is particularly suited to precision workshops, component assembly lines and small-lot quality assurance where compact, accurate measuring tools are required. The combination of HWF optics, a calibrated 10/100 micrometer and a clear reticle supports applications such as electronics assembly checks, small mechanical part inspection and educational laboratories that demand both visual clarity and simple measurement capability. For more complex metrology needs or to confirm fitment in a specific instrument, technical consultation is available. Discuss specifications and compatibility with Metav Werkzeuge’s specialists to ensure the eyepiece integrates seamlessly into the inspection setup; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: NZ.6020-CM Label: HWF eyepiece 20×/12 mm with eyepiece micrometer 10/100 and reticle for NexiusZoom Manufacturer: Euromex Product type: Measuring eyepiece Ocular type: HWF Core specifications Magnification: 20× Field number (FN): 12 mm Micrometer scale: 10/100 SKU: NZ.6020-CM Compatibility and features Reticle: yes Eyepiece micrometer: integrated Compatible series: NexiusZoom; NexiusZoom ESD Cross-selling SKUs: NZ.1902-A, NZ.1902-AP, NZ.1902-B, NZ.1902-B-ESD, NZ.1902-P, NZ.1902-P-ESD, NZ.1902-PG, NZ.1902-S, NZ.1902-S-ESD, NZ.1902-U, NZ.1902-U-ESD, NZ.1903-A, NZ.1903-AP, NZ.1903-B, NZ.1903-B-ESD, NZ.1903-M, NZ.1903-P, NZ.1903-P-ESD, NZ.1903-PG, NZ.1903-S, NZ.1903-S-ESD, NZ.1903-U, NZ.1903-U-ESD, NZ.5302, NZ.5303 FAQ How accurate are measurements taken with this eyepiece? Measurements with the eyepiece micrometer (10/100) provide repeatable visual graduations suitable for comparative and semi-quantitative checks; absolute accuracy depends on calibration against a stage micrometer and the overall optical setup. Is this eyepiece compatible with all NexiusZoom microscopes? The eyepiece is compatible with the NexiusZoom and NexiusZoom ESD series; compatibility with specific microscope configurations should be confirmed if unusual adapters or accessories are installed. Can the reticle be replaced or customised? Reticle options vary by production batch; for custom reticles or replacement parts, specify the eyepiece SKU NZ.6020‑CM when enquiring with the supplier or reseller. What cleaning and handling procedures are recommended? Handle the ocular by its barrel, clean lenses with lens tissue or a suitable optical cleaner, and avoid abrasive materials; regular, careful maintenance preserves the micrometer calibration and reticle visibility. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12mm Halogen Replacement Lamp 12V 50W, Spare Lighting - Euromex
Combining stable 12 V / 50 W output with straightforward compatibility, this halogen spare lamp keeps inspection and task lighting reliable; order the replacement lamp SL.3679 directly via Metav Werkzeuge or consult our specialists for advice. Halogen replacement lamp 12 V 50 W — replacement lighting by Euromex A Halogen replacement lamp 12 V 50 W is intended as a direct spare for compatible 12 V lighting fixtures, restoring original illumination quickly and reliably Reliable 12 V, 50 W halogen output Direct replacement for compatible fixtures Standard SKU for quick reorder SL.3679 Suitable for inspection and task lighting Consistent illumination for precise work The lamp delivers a constant 50 W of halogen light at 12 V, providing steady brightness for inspection and short‑range task lighting. Consistent luminous performance reduces visual fatigue during repetitive checks and detailed work, and the incandescent nature of halogen gives a continuous spectrum that aids colour rendering compared with many LED replacements. The SL.3679 acts as a direct replacement option, avoiding recalibration of light housings and preserving the original optical behaviour of the fitting. For technicians seeking predictable lamp behaviour, the straightforward electrical rating simplifies inventory and maintenance planning. Easy compatibility and safe handling This halogen unit is designed for use in fixtures that accept a 12 V / 50 W halogen capsule, so replacement is typically a matter of matching the voltage, wattage and base type. When installing, allow the lamp to cool before handling and use suitable gloves or a clean cloth to avoid oil deposits on the glass, which can shorten service life. The simple electrical specification supports rapid on‑site replacement and minimal downtime, which benefits production or laboratory workflows. Where dimming is required, compatibility depends on the existing dimmer and transformer; ensure the control equipment is rated for halogen loads. Practical considerations and responsible use Halogen lamps offer reliable light output but require attention to thermal and disposal aspects. The lamp generates heat in normal operation, so maintain adequate clearance in the fitting and avoid enclosed housings that exceed the fixture’s thermal rating. At end of life, dispose of the used lamp according to local regulations for electrical components; check local guidance for recycling or special waste collection. Keeping a small stock of Euromex replacement lamps simplifies logistics and supports uninterrupted operations, while clear labelling of SKU SL.3679 helps avoid mismatches in busy workshops. For availability and expert advice on the Euromex Halogen replacement lamp SL.3679, contact Metav Werkzeuge for prompt stock information and technical guidance Technical data Article number: SL.3679 Label: Halogen replacement lamp 12 V 50 W Manufacturer: Euromex Product type: Replacement lighting Facts Voltage: 12 V Power: 50 W Special features Halogen lamp Replacement lighting Brand: Euromex FAQ Is this lamp compatible with all 12 V fixtures? Compatibility depends on the fixture's accepted lamp base and power rating; the Euromex Halogen replacement lamp SL.3679 is specified for 12 V, 50 W applications and fits fixtures designed for that rating. Can the lamp be used with a dimmer? Dimming depends on the existing transformer and dimmer in the lighting circuit; many halogen systems are dimmable when paired with a suitable dimmer and transformer, but confirm the fixture's specifications before use with the SL.3679. How should the lamp be handled during replacement? Handle the lamp with a cloth or gloves to avoid skin oils on the glass, allow it to cool fully before replacement, and ensure the fixture is disconnected from power prior to installation. What are the main advantages of choosing this replacement lamp? The Euromex SL.3679 provides predictable 50 W halogen output at 12 V, preserving the original light quality of compatible fixtures and simplifying stock management through a standard SKU. How should a used lamp be disposed of? Follow local regulations for disposal of electrical components; used halogen lamps are typically collected as special waste or recycled where facilities exist. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
12mm WF 20x Eyepiece For iScope 30mm Tube, Wide Field Optics - Euromex
Combining reliable optical performance with straightforward integration into iScope systems, this eyepiece delivers sharper detail and a broader viewing area for faster sample inspection. Benefit from the pairing of 20× magnification and a 12 mm field number to improve throughput and reduce observation time — order directly via Metav Werkzeuge or consult our specialists for tailored advice. WF 20×/12 mm eyepiece for iScope (30 mm tube) by Euromex A WF 20×/12 mm eyepiece for iScope is designed for wide-field observation and routine laboratory or teaching applications, optimised for microscopes with a 30 mm tube diameter Wide-field WF design for broader visual field 20× magnification for detailed specimen examination 12 mm field number for consistent image coverage Compatible with 30 mm tube iScope systems Faster identification through increased detail The 20× magnification of this eyepiece raises the level of observable detail, making it easier to distinguish fine structures during routine inspection or teaching demonstrations. The optical configuration prioritises an even image across the field, so minor contrasts and small features become clearer without excessive refocusing. By combining stronger magnification with an optimised ocular layout, the accessory supports quicker visual decisions and more efficient workflows in laboratories and classrooms alike. Wider apparent field to reduce scanning time A WF wide-field design paired with a 12 mm field number provides a noticeably broader apparent field of view compared with standard eyepieces. This wider visual area means fewer stage movements to cover the same specimen region, which accelerates sample scanning and reduces operator fatigue during extended sessions. For users performing repetitive checks or comparative observations, the expanded field translates directly into time savings and more consistent results. Simple mechanical fit and consistent alignment Engineered for a 30 mm tube, this ocular ensures a secure fit and stable optical alignment with the iScope series. The consistent tube interface minimises vignetting and maintains a reliable pupil position, which is particularly useful when switching between objectives or different users. Compatibility with the iScope line reduces setup time and helps preserve calibration across instruments, supporting reproducible observations in applied and educational settings. Built for everyday use with clear supplier support Produced by Euromex, the eyepiece is intended as a pragmatic upgrade that enhances usability without requiring complex adjustments. The optical characteristics support both novice operators and experienced technicians by combining clarity with ease of use. If further technical data or application-specific guidance is required, Metav Werkzeuge provides direct assistance and additional specifications on request — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt advice. For a reliable Euromex eyepiece that integrates smoothly with iScope microscopes, contact Metav Werkzeuge to request technical guidance or arrange supply from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: IS.6220 Label: WF 20×/12 mm eyepiece for iScope, 30 mm tube Manufacturer: Euromex Product type: Eyepiece Model series: iScope Type: WF Core specifications Magnification: 20× Field number: 12 mm Tube diameter: 30 mm Features Wide-field (WF) design Compatible with iScope series Eyepiece / ocular for routine observation FAQ What magnification does the WF 20×/12 mm eyepiece for iScope provide? The WF 20×/12 mm eyepiece for iScope delivers 20× magnification, suitable for enhanced detail work and routine inspections in laboratory or educational contexts. Is the eyepiece compatible with standard tube sizes? Yes, the WF 20×/12 mm eyepiece for iScope is designed for a 30 mm tube, ensuring correct fit and alignment with iScope microscopes. What does WF mean and how does it help during observation? WF denotes wide-field; the WF 20×/12 mm eyepiece for iScope offers a larger apparent field, which reduces stage movements and speeds up sample scanning. Can this eyepiece be used in teaching environments? The WF 20×/12 mm eyepiece for iScope from Euromex is well suited to teaching and demonstration use thanks to its broad field and clear image, promoting easier orientation for learners. How should the eyepiece be maintained for best results? For the WF 20×/12 mm eyepiece for iScope, clean lenses with a soft lens tissue and appropriate cleaning fluid, store in a dust-free case, and avoid touching optical surfaces to maintain consistent image quality. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
12MP 1/1.6in sCMOS Scientific Digital Camera USB‑3, Sony Exmor Sensor - Euromex
Take advantage of a compact, science-grade imaging solution that pairs 12 MP resolution with a high-quality sCMOS Sony Exmor sensor for reliable low-noise results; order directly from Metav Werkzeuge or consult our specialists for integration support. SCMEX-12 — Scientific-quality 12 MP USB‑3 digital camera (sCMOS Sony Exmor, 1/1.6-inch) by Euromex The SCMEX-12 is a compact digital camera for microscopy and laboratory imaging, designed to deliver high-resolution captures from a 1/1.6-inch sensor for inspection, documentation and measurement tasks Scientific 12 MP sCMOS imaging Sony Exmor sensor for low-noise capture 1/1.6‑inch sensor format for high detail USB‑3 interface for fast data transfer Improved measurement confidence through higher resolution A higher pixel count directly increases the level of observable detail; the 12 MP sensor enables finer delineation of edges and features, which supports more accurate measurements and clearer documentation. Using a larger 1/1.6-inch sensor format provides an improved field of view compared with smaller sensors, reducing the need for excessive stitching or repeated captures. For inspection routines and laboratory records, this translates into fewer retakes and a more efficient imaging workflow. Science-grade sensor technology for low-noise imaging The integration of sCMOS technology with a Sony Exmor readout delivers a low-noise signal and a broad dynamic range. This combination preserves detail in both bright and dark regions, which is particularly beneficial for contrast-sensitive applications such as microscopy imaging or materials inspection. Explaining terms: sCMOS refers to scientific CMOS sensors that combine low read noise with high sensitivity, providing cleaner images at moderate exposure levels and making subtle defects easier to detect without sacrificing speed. Faster workflows with USB‑3 connectivity Reliable data transfer is essential when handling large image files; the USB‑3 interface reduces transfer times and supports near real-time image review, which speeds up sample throughput and shortens feedback loops in lab or production environments. Integration into existing capture software and imaging suites is straightforward thanks to the standardised interface, enabling immediate use for documentation, analysis or quality control tasks without lengthy system changes. For tailored advice on integrating the Euromex SCMEX-12 scientific-quality camera into existing workflows, contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: DC.12000s Product name: SCMEX-12 scientific-quality 12 MP USB-3 camera Brand: Euromex Data Resolution: 12.0 MP Sensor type: sCMOS Sensor format: 1/1.6 inch Interface: USB-3 Special features Sony Exmor sensor Scientific-quality imaging Product type: Digital camera / digital microscope UID: DC.12000s FAQ What sensor technology does this camera use? The camera employs an sCMOS sensor with a Sony Exmor readout, providing low noise and wide dynamic range for scientific imaging. What resolution and sensor format are supported? The device records at 12 MP on a 1/1.6-inch sensor format, suitable for detailed microscopy and inspection tasks. Which interface is required for connection? Data transfer and control are handled via USB‑3, enabling fast file transfer and responsive live view. Is the camera suitable for microscopy documentation? Yes; the SCMEX-12 is specified as a digital camera / digital microscope and is intended for laboratory and inspection documentation. What is the manufacturer and SKU for ordering? The camera is supplied by Euromex and listed under SKU DC.12000s. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands, info@euromex.com
See microstructure clearly for decisive quality control
A metallographic microscope (also referred to as a metallurgical microscope or inspection microscope) is an indispensable optical precision instrument in metallography. It renders the microstructure of metals and alloys visible at high magnification and forms the essential link between physical sample preparation and materials‑science assessment.
How the system works in the lab
Metals are opaque to transmitted light, so inspection is performed using reflected‑light techniques. The setup comprises an illumination system that directs light through a beam splitter onto the prepared surface, a high‑quality objective that provides the primary magnification and resolution, and a tube with an eyepiece for visual inspection. Image quality is governed primarily by the objective’s numerical aperture, which determines the resolving power for fine structural details. Integration with a digital camera and specialised evaluation software enables accurate imaging, documentation and norm‑compliant measurement of grain size, phase fractions and microdefects.
Practical benefits for production and quality assurance
In industrial quality control the microscope provides measurable outcomes that reduce risk and save time:
- improved detection of inclusions, pores and micro‑cracks, lowering the chance of in‑service failure
- reproducible grain‑size and phase analysis (ferrite, pearlite, martensite) through calibrated imaging and software tools
- faster throughput in inspection routines, reducing sample turnaround and non‑productive downtime
- enhanced traceability by saving images and measurement reports to support audits and batch acceptance
Why Metav is the pragmatic partner for microscopes
Metav combines decades of metrology expertise with a broad range of inspection solutions, acting as a quality filter for the european market from its base in Emmerich. With over 48,000 customers and more than 250,000 products, Metav offers a single, reliable source for microscopes, camera systems and evaluation software, ensuring consistent supply and professional advice for industry and workshops.
FAQ
Which inspection tasks are best suited to a metallographic microscope?
A metallographic microscope is ideal for analysing grain size, identifying microstructural phases such as ferrite, pearlite and martensite, and detecting microscopic defects like inclusions, pores or cracks that may affect mechanical integrity.
How does numerical aperture affect image quality?
The objective’s numerical aperture directly influences resolution and contrast; higher numerical aperture allows the microscope to resolve finer features in the sample microstructure, which is critical for accurate phase identification and defect sizing.
Can I connect a camera and perform automated measurements?
Yes. Modern metallographic microscopes can be paired with a digital camera and evaluation software to capture images, perform calibrated measurements and generate reproducible, norm‑compliant reports for documentation.
What should I consider when choosing objectives for metallurgical work?
Select objectives with appropriate magnification and high numerical aperture, compatible with reflected‑light illumination and the intended measurement standards; quality optics minimise artefacts and improve repeatability of results.
Does Metav supply complete inspection solutions for workshops?
Metav supplies microscopes, camera systems and software as part of a comprehensive product range, backed by decades of expertise and a commitment to reliable delivery from Emmerich.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com