Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the combination of precision compatibility and easy maintenance to keep turning processes efficient and predictable; order the toolhead directly via Metav Werkzeuge or consult their technical team for application-specific advice. Eckmesserkopf T208TM — 90° turning head for ADKT 1505 indexable inserts by Teknik Makina Eckmesserkopf T208TM is a compact 90° turning head designed for heavy-duty edge engagement and reliable clamping in short-overhang turning applications 90° cutting angle for square turning Compatible with ADKT 1505 inserts 40 mm shank for stable clamping Torx screw M4x10, Torx key T15 included Precision and stability for consistent turning results The corner cutting head delivers repeatable geometry thanks to its 90° cutting angle and a sturdy 40 mm shank, which together reduce vibration during engagement and support accurate chip formation. Designed for ADKT 1505 indexable inserts, the toolhead ensures consistent cutting edges and predictable tool life when paired with suitable inserts from ISCAR. The combination of robust shank diameter and compact overall length provides a stable interface with the toolpost, helping to maintain finish quality and dimensional control across production runs. Faster tool change and lower setup complexity Quick and reliable insert clamping is achieved with the supplied M4x10 Torx screw and the matching T15 key interface, allowing rapid insert replacement and minimising machine downtime. The head accepts ADKT 1505 indexable inserts, so spare parts and replacements are standardised for efficient inventory management. Reduced setup time translates into better machine utilisation and a faster return on operational resources, making the head suitable for both small-batch workshops and larger production lines where changeover speed matters. Designed for workshop durability and compact integration With a nominal diameter of 125 mm, an overall length of 62 mm and a weight of 0.272 kg, the component combines compact form with practical handling characteristics. The head features nine defined cutting edges, arranged to support the intended cutting geometry and to balance load distribution across the insert. Constructed for integration into conventional toolholders with a 40 mm mounting interface, the unit fits existing setups with minimal adaptation, delivering a straightforward upgrade path for machining centres and lathes requiring square turning capability. Contact Metav Werkzeuge for application advice or to source this Teknik Makina turning head; Metav’s specialists in Emmerich are available by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss compatibility and delivery options Technical data Article number: T208TM Manufacturer: Teknik Makina Data Diameter: 125 mm Shank diameter (d): 40 mm Overall length: 62 mm Weight: 0.272 kg Cutting angle: 90° Number of cutting edges: 9 Special features For ADKT 1505 indexable inserts Compatible with ISCAR inserts Torx screw M4x10 Torx key T15 FAQ What insert type does this turning head accept? The turning head accepts ADKT 1505 indexable inserts; it is supplied to work with standard ADKT 1505 geometries. Is the head compatible with ISCAR inserts? Yes, the design is compatible with inserts from ISCAR and other manufacturers that follow the ADKT 1505 specification. What is the shank diameter and why does it matter? The shank diameter is 40 mm; a larger shank improves clamping rigidity, which in turn reduces vibration and improves surface finish consistency. Which Torx screw and key are required for insert fastening? Insert fastening uses an M4x10 Torx screw and a T15 Torx key, both referenced in the product data. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of a Ø125 mm tool head, a 90° cutting angle and 8 cutting edges for stable, repeatable turning operations; procure the T450TM via Metav Werkzeuge or consult our specialists for application support. Eckmesserkopf T450TM – Corner tool head Ø125 mm, 90° for ANKX 0706 (Teknik Makina) An Eckmesserkopf T450TM engineered as a corner turning head for external machining, optimised for ANKX 0706 indexable inserts and general turning tasks in production environments Robust corner tool head Ø125 mm 90° cutting angle for precise profiling 8 cutting edges for extended tool life Compatible with ISCAR ANKX insert series Predictable cycle times through geometric stability The head delivers measurable benefits in cycle consistency thanks to its Ø125 mm head diameter and a compact overall length of 63 mm, which together reduce vibration and deflection during turning. The 40 mm shank provides a secure clamping interface, ensuring the clamped assembly remains rigid under cutting forces; this geometric stability translates directly into improved dimensional repeatability and reduced scrap rates for series production. The documented mass of 3.59 kg contributes to damping, enhancing surface finish without complex machine adjustments. Lower tooling cost per part via multiple cutting edges Equipped with 8 cutting edges, the tool head reduces downtime associated with index changes and tool changes, improving productivity and cost-efficiency. The design accepts ANKX 0706 indexable inserts (ISCAR-compatible), enabling economical insert indexing and simplified inventory management. Fast replacement is achieved with the M5x12 Torx screws and a T20 driver, limiting maintenance time and keeping the machine spindle producing rather than waiting for tooling intervention. Clear compatibility and easy integration into tool setups The holder is prepared for ISCAR-style inserts from the ANKX family and is intended for systems that require a 90° approach angle for profiling and shoulder turning. The T450TM suits workshops standardising on indexable turning systems and integrates with existing turret pockets that accept a 40 mm holder seat. This compatibility removes guesswork during procurement and supports process standardisation, allowing purchasing to consolidate supplier lists without sacrificing flexibility on the shop floor. Practical handling, inspection and workshop benefits Maintenance routines are straightforward: insert changes and clamping checks use common workshop tools (Torx T20) and standard screw size (M5x12), so technicians can perform service quickly and with minimal special tooling. The compact overall length of 63 mm reduces interference in multi-tool turret arrangements, and the robust construction supports reliable performance in medium-duty turning operations. These practical aspects reduce machine downtime and simplify spare parts stocking. Rely on Teknik Makina's T450TM corner tool head for stable turning; order through Metav Werkzeuge for secure supply and professional advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T450TM Manufacturer: Teknik Makina Product name: Eckmesserkopf Designation: for ANKX 0706 Indexable Inserts eClass: 21181015 Facts Diameter: 125 mm Cutting angle: 90° Shank / holder diameter: 40 mm Overall length: 63 mm Weight: 3.59 kg Cutting edges: 8 Torx screw: M5x12 Torx key size: T20 Special features Compatible insert system: ISCAR ANKX family Suited for external turning and profiling Compact length for crowded turret setups FAQ Which insert size is the head designed for? The Eckmesserkopf T450TM is specified for ANKX 0706 indexable inserts and is compatible with ISCAR ANKX-style insert geometries as noted for the T450TM holder. What fastening and service parts are required for insert changes? Insert clamping on this corner tool head uses M5x12 Torx screws and a T20 driver; these parts are listed for Teknik Makina T450TM service procedures. What are the main dimensions that affect turret integration? Key dimensions for integration are a 40 mm shank diameter, Ø125 mm head diameter and an overall length of 63 mm; these determine fitment and clearance in turret pockets for the T450TM corner tool head. Is the holder suitable for precision turning and stable finishing? Yes, the 90° cutting angle, robust mass (3.59 kg) and 8 cutting edges make this holder suitable for stable finishing and repeatable turning operations when equipped with appropriate ANKX inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust combination of secure toolholding and insert compatibility for precise, repeatable profiling — the compact design and 40 mm shank ensure stable machining and quick insert changes. Order the corner cutting head directly via Metav Werkzeuge or ask our consultants if needed. Corner cutting head for APKT 1604 indexable inserts (T190TM) — 125 mm diameter, 90° cutting angle Corner cutting head (T190TM) designed for medium‑duty indexable insert operations; suitable for milling tasks that require a stable tool body and fast insert replacement Compatible with APKT 1604 indexable inserts 125 mm cutter diameter for stable machining 40 mm shank diameter for secure toolholding Torx M4x10 fastening; T15 Torx key required Stable cutter geometry for consistent surface quality The robust body and the 125 mm diameter deliver stiffness that reduces chatter and improves surface finish during interrupted or continuous cuts. With a defined 90° cutting angle and 9 cutting edges, the head maintains a predictable cutting behaviour across multiple passes, which supports process reliability and reduces rework. The construction is intended to provide a consistent engagement with the workpiece, translating into measurable time savings on serial production and a reduced scrap rate. Fast insert clamping and straightforward maintenance Designed around the industry standard APKT 1604 format, the head accepts inserts from recognised suppliers such as Korloy, allowing flexible stocking and fast changeover. The inserts are secured by an M4x10 Torx screw and require a T15 key for replacement, enabling rapid, repeatable clamping without special tools. A 40 mm shank diameter ensures firm seating in standard toolholders, contributing to minimal runout and reliable reproducibility for batch work. Compact length for versatile set‑ups and reliable handling With an overall length of 62 mm and a weight of 3.642 kg, the tool head balances compact installation with the mass necessary to dampen vibration in many machining conditions. The combination of a shorter overhang and sturdy shank improves accessibility in confined setups while maintaining cutting stability. This makes the tool head suitable for workshops looking to streamline tool inventories while keeping flexibility for various milling operations. Application advantage: predictable results and efficient workflows Integrating this indexable head into a production line contributes to predictable cycle times: stable geometry and standardised insert interfaces simplify process planning and tool management. The ability to use widely available APKT 1604 inserts reduces procurement complexity and supports quick recovery from tool wear events. For machining centres requiring dependable repeatability, the head provides a practical balance between performance and operational simplicity. Contact Metav Werkzeuge in Emmerich for tailored application advice and supply of Teknik Cutting Tools components — technical consultation available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: T190TM Manufacturer: Teknik Makina Compatible inserts: APKT 1604 Compatible insert manufacturer: Korloy Cutter diameter (mm): 125 Shank diameter (mm): 40 Overall length (mm): 62 Number of cutting edges: 9 Cutting angle: 90° Fastening screw: M4x10 Required Torx key: T15 Weight (kg): 3.642 Core specifications eClass: 21181015 SKU: T190TM Story trigger: eckmesserkopf Materials & features Indexable insert system: APKT 1604 Designed for standard toolholders with 40 mm shank Torx screw fixation for repeatable clamping Compact overall length for close‑quarter machining FAQ What inserts fit this cutting head? The head is made for APKT 1604 indexable inserts; Korloy inserts in that format are a listed compatible option for this tool. Which toolholder dimension is required for mounting? A toolholder that accepts a 40 mm shank is required to mount this corner cutting head (SKU T190TM) securely. How are the inserts fixed in place? Inserts are secured with an M4x10 Torx screw; a T15 Torx key is used for tightening and removal to ensure consistent clamping torque. Is this tool head suitable for heavy interrupted cuts? The 125 mm diameter and compact design provide stiffness that helps manage interrupted cuts, offering improved stability and repeatability for many medium‑duty applications. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust 125 mm corner turning head that combines compatibility with BOMT 1304 indexable inserts and integrated internal coolant for improved chip control and longer tool life. Order directly via Metav Werkzeuge or consult the technical team for application-specific advice. Corner turning head for BOMT 1304 indexable inserts — 125 mm, internal coolant (Teknik Makina) Corner turning head for BOMT 1304 indexable inserts designed for square/shoulder turning operations with built-in coolant supply and a compact 63 mm overall length. 125 mm diameter cutting head Compatible with BOMT 1304 indexable inserts Integrated internal coolant for chip control 90° cutting angle for square shoulder turning Improve machining stability with internal coolant and precise chip control The built-in internal coolant channel ensures directed coolant flow to the cutting edge, supporting consistent chip evacuation and reducing thermal load at the cutting zone. Directed coolant reduces heat-related wear and helps maintain dimensional stability across longer runs, which translates to fewer changeovers and improved process reliability. For jobs requiring repeatable shoulder faces, the combination of coolant feed and rigid geometry supports stable cutting conditions and predictable results. Reliable compatibility for quick tool set-up and consistent results Designed to accept BOMT 1304 indexable inserts (suitable with Ingersoll inserts), the head simplifies insert selection and replacement while maintaining the correct 90° cutting angle for shoulder operations. The compatibility with a common insert family reduces setup complexity and inventory variety, enabling faster changeovers and consistent surface finishes. The Corner turning head retains accurate insert positioning to keep repeatability high, which benefits batch production and fine-tolerance turning tasks. Solid design that supports industrial workloads With a 125 mm diameter and a compact 63 mm overall length, the component offers a balance of rigidity and accessibility for shoulder turning in confined setups. The mass and construction support vibration damping and cutting stability, which helps preserve insert life and reduce unwanted surface irregularities. The result is a robust turning solution suited to demanding shop-floor environments where steady performance and minimal rework are priorities. Practical fastening and maintenance details for reliable operation Fastening uses an M3.5×8.5 torx screw requiring a T10 Torx key, ensuring secure clamping of the insert seat and minimal play during cutting. Clear specification of fastener type simplifies procurement of service tools and replacement parts, while the head’s straightforward design keeps routine inspection and maintenance efficient. Documentation of these details supports predictable downtime planning and reduces the risk of assembly errors during insert changes. Contact Metav Werkzeuge for application guidance or to arrange a technical assessment of the Teknik Makina corner turning head (SKU T972TM) to ensure optimal integration into existing tool cycles Technical data SKU: T972TM ECLASS: 21181015 Manufacturer: Teknik Makina Product type: Corner turning head Label: 125mm Corner turning head BOMT 1304 L63mm with internal coolant Key figures Diameter: 125 mm Overall length: 63 mm Weight: 3.314 kg Cutting angle: 90° Number of cutting edges: 11 Special features Internal coolant: Yes Compatible inserts: BOMT 1304 Compatible insert manufacturer: Ingersoll Torx screw: M3.5×8.5 Torx key: T10 FAQ What inserts fit this turning head? This turning head accepts BOMT 1304 indexable inserts; compatibility is indicated for Ingersoll-made inserts and the head is designed for correct seating of this insert family. Does the head supply coolant to the insert tip? Yes, the head features internal coolant to deliver coolant directly toward the cutting edge, aiding chip control and thermal management during cutting. What is the cutting geometry of the head? The head provides a 90° cutting angle, making it suitable for square shoulder and face-turning operations where a right-angle approach is required. Which fastening hardware is specified for insert clamping? Insert clamping uses an M3.5×8.5 Torx screw, compatible with a T10 Torx key as specified in the technical data. Is the product suitable for heavy-duty industrial use? The head’s 125 mm diameter, compact 63 mm overall length and solid construction are intended for stability in production environments, supporting durable performance under continuous operation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid 40 mm shank and a 90° cutting angle for stable, repeatable machining with Sandvik R390-1704 inserts; order directly via Metav Werkzeuge or consult our specialists for application support. 90° Indexable Insert Head (Eckmesserkopf) — for R390-1704, 40 mm Shank — Teknik Makina The 90° indexable insert head is a compact turning tool holder engineered for precise shoulder and profiling operations using R390-1704 indexable inserts, suited to CNC lathes and turret tool posts. 90° cutting angle for precise shoulder work Compatible with R390-1704 indexable inserts 40 mm shank for high rigidity and stability Torx M3.5x8.5 screw with T15 key for secure clamping Increased stability for consistent surface quality A robust 40 mm shank and a substantial head diameter of 125 mm deliver the rigidity necessary to reduce tool vibration and chatter. The resulting improvement in surface finish and dimensional stability comes from the fixed 90° cutting angle, which concentrates cutting forces and allows predictable chip formation. For production environments that demand repeatability, the construction minimises deflection and extends insert life, lowering overall tooling costs. Faster insert changes and reliable clamping reduce downtime Quick and secure insert replacement is enabled by the Torx M3.5x8.5 fastening combined with a T15 key, which simplifies tool change routines and limits over-tightening. Compatibility with R390-1704 inserts (Sandvik) means commonly stocked inserts can be used immediately, shortening setup time. The straightforward clamping design supports efficient workshop workflows and reduces non-productive time during batch changeovers. Integration with existing turning systems and versatile application Designed to fit tool posts with a 40 mm holder interface, this head integrates easily into established toolsets and supports a range of external turning and profiling tasks. The head’s overall length of 62 mm and a compact footprint help when multiple tools are mounted in close proximity. Weighing 3.68 kg, the assembly offers a balance between mass for dampening and a size that keeps turret loads manageable, making it suitable for both heavy cuts and precise finishing operations. For technical advice or to source the Teknik Cutting Tools 90° indexable insert head (SKU T414TM), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration into existing tooling systems Technical data Article number: T414TM Manufacturer: Teknik Makina Compatible inserts: R390-1704 (Sandvik) Shank diameter: 40 mm Head diameter: 125 mm Overall length: 62 mm Cutting angle: 90° Weight: 3.68 kg Torx screw: M3.5x8.5 Torx key size: T15 Core data Shank diameter: 40 mm Head diameter: 125 mm Overall length: 62 mm Weight: 3.68 kg Cutting angle: 90° Cutting edges: 9 Special features Compatible with R390-1704 indexable inserts (Sandvik) Torx M3.5x8.5 fastening T15 key for clamping SKU T414TM Brand: Teknik Makina FAQ Which inserts fit this head? The head accepts R390-1704 indexable inserts; compatible inserts from Sandvik can be fitted without modification. What is the shank interface size? The tool head uses a 40 mm shank interface suitable for standard 40 mm holder mounts. How is the insert secured? Inserts are clamped with a Torx M3.5x8.5 screw tightened using a T15 key for secure, repeatable clamping. Is the head suitable for heavy roughing cuts? With a 40 mm shank and a solid build, the head provides the rigidity needed for demanding turning operations, improving stability under load. What is the SKU for ordering or referencing? Order or reference SKU T414TM when enquiring about the Teknik Cutting Tools 90° indexable insert head. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact design that combines a 125 mm diameter for stable cutting with a 40 mm bore for straightforward mounting; secure clamping via an M4x10 Torx screw ensures consistent tool positioning and reduced vibration. Order directly via Metav Werkzeuge or consult our specialists for application advice and fast supply. Corner Tool Head for SNHU 1206 Indexable Inserts (Teknik Makina) A robust corner cutting head designed for use with SNHU 1206 indexable inserts, optimised for stable turning and quick insert changes in workshop and production environments For SNHU 1206 indexable inserts 125 mm diameter for solid stability 40 mm bore for standard mounting M4x10 Torx clamping with T15 key Precision and stability that improve cycle consistency The large 125 mm diameter and a 40 mm bore deliver a rigid seating that reduces runout and vibration during turning operations. This stability translates into repeatable surface finish and longer insert life, which supports higher throughput on production runs. By favouring a solid mechanical interface the tool head helps maintain cutting geometry even under heavier radial loads, so setup times are shortened and machining results remain consistent across batches. Faster insert changes and secure clamping minimise downtime Clamping with an M4x10 Torx screw (key size T15) provides a reliable, torque-stable connection that simplifies indexable insert replacement. Compatibility with Palbit-type inserts and the SNHU 1206 format means insert handling is straightforward; interchangeability reduces inventory complexity. A head designed for quick, repeatable clamping supports faster maintenance cycles and less unplanned stoppage, contributing to measurable productivity gains on the shop floor. Built for workshop demands and backed by reliable supply Manufactured by Teknik Makina and supplied via Metav Werkzeuge, the component is intended for everyday use in professional turning applications. The robust construction and clear mechanical interfaces prioritise long-term uptime. Metav’s distribution from Emmerich combines broad availability with industry knowledge — a proven supply chain supported by Metav Werkzeuge’s extensive product range and market experience, which reassures procurement and engineering teams when specifying replacement or upgrade parts. Contact Metav Werkzeuge for tailored technical advice and fast delivery from Emmerich – request consulting on application fit or place a supply enquiry for Teknik Cutting Tools components via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: T621TM Manufacturer: Teknik Makina Product: Corner tool head for SNHU 1206 indexable inserts Suitable for inserts: SNHU 1206 Compatible insert manufacturer: Palbit Torx screw: M4x10 Torx key: T15 Facts Diameter: 125 mm Mount bore: 40 mm Overall length: 63 mm Cutting edges: 10 Weight: 2.708 kg Special features For SNHU 1206 indexable inserts Compatible with Palbit indexable inserts Uses M4x10 Torx clamping screw FAQ Which inserts are compatible with this head? The corner tool head is designed for SNHU 1206 indexable inserts and is compatible with inserts from Palbit as specified for the T621TM tool. What mounting interface is required? A 40 mm bore is required for mounting; the head’s 40 mm mount bore ensures standard installation in compatible toolholders. How is the insert secured? Insert clamping is achieved with an M4x10 Torx screw tightened using a T15 key to provide a secure, repeatable connection. Can this head be used for heavy-duty turning? The 125 mm diameter and robust construction offer improved stability under radial loads, supporting heavier turning operations where a rigid interface is needed. What is the article number for ordering? The article number for ordering and enquiries is T621TM from Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of robust compatibility with SPMT 1204 indexable inserts, a stable Ø 125 mm head and secure shank Ø 40 mm mounting ensures reliable external turning performance and reduced setup time; order the indexable angle turning head directly via Metav Werkzeuge or consult our specialists for application advice. Indexable angle turning head T654TM – for SPMT 1204 inserts, Ø 125 mm (Teknik Makina) The T654TM indexable angle turning head for SPMT 1204 indexable inserts, designed for stable external turning and quick insert changes in production and workshop environments Fits SPMT 1204 indexable inserts Ø 125 mm head for stable cutting performance Shank Ø 40 mm for secure toolholder mounting M5x12 Torx screw with T20 key for fast clamping Consistent cutting results and clear compatibility The head delivers repeatable external turning thanks to its compatible interface with SPMT 1204 indexable inserts and a substantial Ø 125 mm body that reduces vibration during cuts. The design focuses on process reliability: the combination of a rigid shank with shank Ø 40 mm and a compact overall length of 63 mm gives a low overhang for improved tool life and consistent dimensional output. For operations that require frequent insert changes, the M5x12 Torx screw and corresponding T20 key enable secure, quick replacement without special tooling, keeping machine uptime high. Faster setup and lower downtime through practical design A secure clamping concept reduces the risk of misalignment and contributes directly to machining efficiency. The head's geometry, with eight cutting positions indicated in the specifications, allows extended service intervals for the cutting edges, while the moderate weight of 2.935 kg supports safe handling and straightforward mounting in standard toolposts. For production planners this translates into shorter setup cycles and predictable machining behaviour — benefits that improve throughput and reduce the potential for scrap. Simple integration and operator-friendly handling Integration into existing turning stations is aided by the standardised mounting dimensions and clear fastening detail: M5x12 Torx screw tightened with a T20 key. The compact overall length of 63 mm reduces interference and simplifies access for tool changes, while the head diameter and robust construction maintain stability under cutting forces. The result is a toolholder that is both workshop-friendly and suitable for industrial machining tasks where reliability and repeatability matter most. Contact Metav Werkzeuge today to discuss how the Teknik Cutting Tools T654TM indexable angle turning head can be integrated into existing tooling fleets; call +49 2822 7131930 or email info@metav-werkzeuge.com to request application guidance from our specialists Technical data Article number: T654TM Manufacturer: Teknik Makina Product name: Indexable angle turning head (translated) Compatible inserts: SPMT 1204 Indexable Inserts eCl@ss: 21181015 Facts Head diameter: 125 mm Shank diameter (aufnahme): 40 mm Overall length: 63 mm Weight: 2.935 kg Cutting edges / positions: 8 Special features Fastening screw: M5x12 Torx Torx key: T20 Application: External turning with SPMT 1204 inserts Files: 2 associated file references (IDs available) FAQ Is this head compatible with SPMT 1204 indexable inserts? Yes. The T654TM is specified for use with SPMT 1204 indexable inserts and supports secure clamping for those insert types. What are the key mounting dimensions for the tool head? The head has a shank diameter of 40 mm, a head diameter of 125 mm and an overall length of 63 mm, suitable for standard turning toolholders that accept a 40 mm shank. Which screw and key are required for insert clamping? Insert clamping uses an M5x12 Torx screw and a T20 Torx key, allowing quick and reliable insert changes. How heavy is the turning head and how does that affect handling? The head weighs 2.935 kg, a balance between robustness and manageability that eases manual handling during tool changes while providing the mass needed for cutting stability. Can the head be used for high-feed roughing operations? The T654TM’s diameter and rigid shank improve stability for demanding external turning tasks; selection of appropriate SPMT 1204 grades and machining parameters is advised for heavy roughing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust stability and rapid insert changes to keep production running with consistent shoulder cuts; the combination of a 90° cutting angle and a Ø125 mm engagement ensures repeatable results while compatibility with XNEX 0806 indexable inserts simplifies tooling choices — order directly via Metav Werkzeuge or contact our consultants for integration advice. Corner Tool Head T848TM — 90° indexable head for XNEX 0806 inserts, Ø125 mm by Teknik Makina The Corner Tool Head is engineered for precise 90° shoulder machining with XNEX 0806 indexable inserts and is compatible with SECO and WINSTAR plate systems, making it suitable for rigid milling and facing operations. 90° cutting angle for precise shoulder cuts Diameter 125 mm for stable engagement Compatible with XNEX 0806 indexable inserts Robust 40 mm shank, 3.155 kg weight Precision for consistent shoulder finishes The holder delivers a 90° cutting angle that is defined to produce consistent shoulder and face geometries while limiting the need for rework. Designed around the XNEX 0806 insert format, the head enables simple plate indexing so that cutting edges are returned to nominal geometry quickly; this improves batch repeatability and shortens setup time. The combination of precise seating and a standardised insert interface reduces positioning variance, which is particularly beneficial in medium- to high-volume machining where cycle-to-cycle consistency is essential. Stable design built for heavy-duty cycles A 40 mm shank and a Ø125 mm head diameter give the assembly the mass and stiffness required for robust engagement at the cut, and the total weight of 3.155 kg contributes to dampening of vibration in demanding conditions. The overall length of 60 mm keeps the overhang compact, improving rigidity. Fast and secure clamping is provided via an M4x12.5 Torx screw (Torx key size T15), enabling quick plate changes with a defined torque interface. These design details mean fewer interruptions and better surface quality when processing shoulders and faces under industrial loads. Compatibility that eases tooling decisions and integration Supplied for use with XNEX 0806 plates, the head is compatible with inserts from SECO and WINSTAR, allowing straightforward procurement and interchangeability across existing tool inventories. The holder’s 90° geometry and standardised mounting ensure it can be integrated into setups that accept a 40 mm receiver without complex adaptation. For production planners, this results in reduced tooling variety and easier spare-part management, while maintenance teams benefit from predictable, standardised service procedures. Discuss integration with Metav Werkzeuge for seamless fitting and spare-part availability; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to review machine compatibility and delivery options for the Teknik Makina corner tool head T848TM Technical data Article number: T848TM Manufacturer: Teknik Makina Measurements Diameter: 125 mm Shank/receiver diameter: 40 mm Overall length: 60 mm Weight: 3.155 kg Cutting angle: 90° Number of cutting edges: 10 Compatibility & features For XNEX 0806 indexable inserts Compatible with SECO and WINSTAR plates Torx screw M4x12.5 Torx key T15 Robust construction for industrial use FAQ What insert type does the head accept? The corner tool head accepts XNEX 0806 indexable inserts; compatibility with SECO and WINSTAR plate variants is supported for flexible sourcing. Which machines will accept this holder? Machines with a 40 mm receiver or an adaptor for a 40 mm shank can accept the holder; the compact 60 mm overall length aids fitment in tight setups. How is the insert secured and indexed? Inserts are clamped using an M4x12.5 Torx screw (Torx key T15); indexing is achieved by rotating the insert to the next edge and re-clamping to restore cutting geometry. Is the holder suitable for heavy milling operations? Yes — the Ø125 mm head diameter, 40 mm shank and 3.155 kg mass provide the stiffness and damping needed for demanding shoulder and face milling tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of stability and compatibility: the 40 mm tool shank and 90° cutting geometry deliver consistent corner turning and reliable insert clamping. Paired with broad compatibility for XOMX 1806 indexable inserts and SECO standards, this head streamlines tooling inventories and reduces setup time. Order via Metav Werkzeuge or consult our specialists for integration advice. Eckmesserkopf — Corner cutting head with 90° geometry for XOMX 1806 indexable inserts (Teknik Makina) A compact, heavy-duty Eckmesserkopf intended for precision turning where stable seating of XOMX 1806 indexable inserts is required in workshop and small-scale production environments *Solid 40 mm tool shank for stable clamping *Compatible with SECO XOMX 1806 inserts *90° cutting angle for precise corner turning *Ø 125 mm diameter for heavy-duty operations Reliable rigidity for consistent turning results The head is engineered to provide high stability during corner turning, reducing vibration and improving surface finish. With a solid 40 mm shank, the assembly delivers secure clamping that translates into repeatable cuts and fewer reworks. This mechanical stability lowers the risk of insert movement under load, which in turn shortens setup times and increases effective machine uptime — a pragmatic advantage for production-focused workshops. Proven compatibility and simple maintenance Designed for use with XOMX 1806 indexable inserts and compatible with the SECO insert form, the tool head simplifies tool procurement and storage. The 90° cutting geometry is optimised for corner and profiling work, making toolpath planning straightforward. Fast fixation is achieved via a Torx M4.5x11 screw with a T15 drive, enabling secure clamping with conventional workshop tooling and swift insert changes to keep operations moving. Built for practical workshop use and durability With an outer diameter of Ø 125 mm and a mass of 3.427 kg, the head is intended for robust, repeatable machining tasks rather than fine micromachining; its weight and construction support heavy cuts and stable thermal behaviour. The design prioritises straightforward handling and predictable performance: fewer surprises at set-up mean fewer interruptions to production. For teams seeking reliable corner-turning capability that integrates with established insert systems, this solution reduces logistical complexity while supporting consistent part quality. For tailored advice on integrating this Teknik Makina corner cutting head into existing toolholders and processes, contact Metav Werkzeuge — Metav’s specialists can provide application guidance and delivery from Emmerich to the workshop floor Technical data Article number: T526TM Brand: Teknik Makina Designation: Eckmesserkopf Additional designation: for XOMX 1806 Indexable Inserts ECLASS: 21181015 Core data Diameter: 125 mm Shank / clamping diameter: 40 mm Weight: 3.427 kg Overall length: 62 mm Cutting angle: 90° Number of cutting edges: 9 Special features Compatible with XOMX 1806 inserts Compatible with SECO insert form Torx screw M4.5x11 Torx drive T15 SKU: T526TM Brand origin: Teknik Makina FAQ What insert type does this head accept? The head accepts XOMX 1806 indexable inserts; the design is matched to that insert geometry for secure seating and consistent cutting. Is the head compatible with SECO inserts? Compatibility with SECO-format XOMX 1806 inserts is indicated; this eases sourcing and toolboard standardisation. What drive is required for the clamping screw? Clamping uses a Torx M4.5x11 screw with a T15 drive, allowing straightforward use of common Torx keys in the workshop. Is this head suitable for heavy cuts? With a diameter of 125 mm and a mass of 3.427 kg, the head is intended for robust corner turning and stable cutting under heavier feeds and depths. Which SKU should be referenced when ordering or inquiring? Please refer to SKU T526TM when requesting stock or technical details for this Teknik Makina corner cutting head. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of secure clamping, precise compatibility and compact design to keep grooving and parting jobs consistent and productive; order the holder directly through Metav Werkzeuge or consult our advisors for application support. Grooving clamp holder PHCR 20 L125mm — 20 mm clamp width, right-hand, Teknik Makina A grooving clamp holder for PHCR 20 indexable inserts, engineered for right‑hand external grooving and parting tasks on lathes and turning centres. For PHCR 20 indexable inserts 20 mm clamp width for stable clamping Overall length 125 mm for turret fitting Right‑hand cutting direction Stable clamping for consistent surface quality The holder’s 20 mm clamp width and compact geometry provide a secure grip on the insert, which reduces micro‑movement during cutting. Reduced vibration leads to improved surface finish and a lower rate of insert wear, making machining cycles more predictable. For industrial turning, this translates into fewer tool changes and less unplanned downtime, which benefits throughput and process reliability. Built for compatibility and straightforward installation Designed to accept PHCR 20 indexable inserts and compatible with ISCAR specifications, the tool is supplied with a standard fastening arrangement: a Torx T20 key interface and M5x12 screw for repeatable, secure assembly. With an overall length of 125 mm and a nominal mass of 0.37 kg, the holder integrates easily on turrets and toolposts without adding unnecessary overhang, supporting stable cutting conditions in right‑hand grooving operations. Workshop efficiency and supplier confidence Routine replacement and maintenance are simplified by the standardised fastener and clear compatibility with established insert lines, allowing faster toolset changes on the shop floor. Backing up the product is Metav’s commitment to accessible precision: a broad range of inventory, central distribution from Emmerich and long‑standing technical support ensure parts and advice are available when required. The combination of practical design and reliable supply assists workshop planning and keeps production moving. Contact Metav Werkzeuge for application advice and to secure the Teknik Cutting Tools grooving clamp holder D970TM with immediate dispatch from Emmerich. Technical Data Article number: D970TM Label: Stechklemmhalter PHCR 20 L125mm Manufacturer: Teknik Makina Specifications Overall length: 125 mm Clamp width: 20 mm Clamp height: 20 mm Weight: 0.37 kg Cutting direction: right Compatibility & Fastening For PHCR 20 indexable inserts Compatible with ISCAR inserts Torx key: T20 Torx screw: M5x12 FAQ What inserts are suitable for this holder? The holder accepts PHCR 20 indexable inserts and is specified for compatibility with ISCAR insert geometries and tolerances for reliable clamping. Is the clamping direction right‑hand or left‑hand? This tool is configured for right‑hand cutting; the geometry and clamp orientation support right‑hand external grooving and parting operations. Which fastener is used to secure the insert? Assembly uses a M5x12 Torx screw operated with a Torx T20 key, providing repeatable and secure fastening for the insert pocket. What are the key dimensions to check for turret fitting? Important mounting dimensions are an overall length of 125 mm, a clamp width of 20 mm and a clamp height of 20 mm, which should be verified against the machine’s toolpost or turret envelope. Where can technical advice and spare screws or keys be obtained? Spare parts and application guidance are available via Metav Werkzeuge; reference the SKU D970TM and the Teknik Cutting Tools holder when enquiring. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact solution that combines a 125 mm overall length, secure Torx fixing and compatibility with PHCR 20 indexable inserts for consistent parting and grooving performance. Order the cut-off clamping holder PHCR 20 L125mm directly via Metav Werkzeuge or ask our consultants if needed. Cut-off clamping holder PHCR 20 L125mm — 125 mm overall length, right-hand cutting A cut-off clamping holder for PHCR 20 indexable inserts, intended for precise parting and grooving tasks on turning centres. Compatible with PHCR 20 indexable inserts 125 mm overall length for stable mounting Right-hand cutting orientation Torx T20 screw with M5x12 fixing Precision and process reliability for parting operations The cut-off clamping holder is engineered to provide steady, repeatable performance during parting and grooving. With an overall length of 125 mm and a compact cross-section of 20 x 20 mm, the design reduces overhang and vibration, which helps maintain tool life and surface finish. Compatibility with PHCR 20 indexable inserts ensures a defined cutting edge geometry for controlled chip formation, while the right-hand cutting orientation matches typical lathe toolpost setups. These characteristics translate directly into shorter cycle times and fewer reworks. Secure clamping and quick indexable insert changeover Fast, reliable fixing is achieved via a Torx T20 retaining screw and an M5x12 fastening screw, offering consistent clamp force and repeatable seating of the insert. The compact mass (approx. 0.37 kg) assists in resisting chatter without adding unnecessary load to the toolpost. The holder accepts PHCR 20 inserts from ISCAR and compatible suppliers, simplifying tool inventory and enabling rapid insert exchanges during scheduled stops. The result is reduced set-up time and improved machine uptime across batch and single-piece production. Practical benefits for workshop efficiency and versatility Installed as part of a clamping system, this toolholder supports standardised tooling routines and lowers the barrier to high-precision turning tasks. The combination of narrow body dimensions and a robust clamping interface suits tight setups on small and medium-sized lathes. For engineers and workshop managers, the main advantages are consistent part quality, predictable tool consumption and simplified maintenance planning. The holder’s straight functionality aligns with lean manufacturing principles and aids in achieving predictable production throughput. Contact Metav Werkzeuge for application advice or to order the Teknik Makina cut-off clamping holder D974TM; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data SKU: D974TM Model: Stechklemmhalter PHCR 20 L125mm Manufacturer: Teknik Makina ECLASS: 21181005 For inserts: PHCR 20 Facts Overall length: 125 mm Weight: 0.37 kg Clamp width: 20 mm Clamp height: 20 mm Cutting direction: right Torx key: T20 Fixing screw: M5x12 Special features Compatible with ISCAR PHCR 20 indexable inserts Category: clamping holders Product type: cut-off / grooving holder FAQ Is this holder compatible with PHCR 20 inserts from ISCAR? Yes. The cut-off clamping holder is designed for PHCR 20 indexable inserts and is compatible with inserts from ISCAR. What are the main dimensions of the holder? Overall length is 125 mm, clamp section measures 20 x 20 mm, and the weight is approximately 0.37 kg. Which cutting direction is supported by this holder? The holder is specified for right-hand cutting operations. Which screw type secures the insert? Insert and clamp are secured with a Torx T20 drive and an M5x12 fixing screw. Can the holder be used on small lathes with limited overhang? Yes. The compact 125 mm length and narrow cross-section make the holder suitable for setups with limited overhang. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; eMail: info@metav-werkzeuge.com

Benefit from a combination of precise left-hand orientation, compatibility with DN-- 1504 indexable inserts and secure clamping for consistent turning performance; order the tool directly via Metav Werkzeuge or consult our specialists for application support. Klemmhalter — DDJNR toolholder for DN-- indexable inserts, left-hand (Teknik Makina) The Klemmhalter is a left-hand turning toolholder designed for DN-- 1504 indexable inserts, engineered to provide secure clamping and consistent form accuracy in workshop and industrial lathe applications. Left-hand turning orientation Compatible with DN-- 1504 inserts ISO DDJNL 2020 designation Robust clamping and compact 125 mm length Precision and stability for demanding turning operations A toolholder with a defined left-hand turning orientation and a 93° cutting angle offers predictable engagement and repeatable tool geometry, which is essential for series production and precision finishes. The combination of a 125 mm overall length and a mass of 0.426 kg contributes to a stable setup that resists vibration without compromising accessibility at the turret edge. Designed to maintain a consistent tool position, the holder supports reduced part variation and improved surface quality through its secure clamping arrangement. Compatibility and faster insert turnover to cut downtime Engineered for indexable turning, the holder accepts DN-- 1504 inserts and follows the DDJNR/DDJNL layout common in industry tooling systems. The clear ISO designation DDJNL 2020 and the shank type K15 help to ensure correct mounting and interchangeability within existing tool inventories. Using standard indexable inserts simplifies changeover procedures: worn edges can be rotated or replaced rapidly, reducing fixture time and improving overall machine uptime while preserving cutting performance across batches. Workshop-ready dimensions and reliable handling for everyday use Compact functional dimensions such as the 25 mm cutting head width, 20 mm holder height and 38 mm cutting height provide a balance of rigidity and manoeuvrability. These proportions make the item suitable for confined tool stations while still offering a secure seating for inserts under moderate cutting forces. The straightforward geometry supports predictable chip flow and stable cutting conditions, which benefits both prototype shops and repetitive production tasks by lowering setup complexity and ensuring repeatable results. For application-specific advice on this Teknik Cutting Tools DDJNR toolholder or to discuss compatibility with existing tooling, contact Metav Werkzeuge GmbH in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for competent, local guidance. Technical data Article number: D313TM Product: Klemmhalter Designation: DDJNR for DN-- Indexable Inserts Manufacturer: Teknik Makina Numbers / Core technical data Overall length: 125 mm Weight: 0.426 kg Cutting head width: 25 mm Holder height: 20 mm Body width: 20 mm Cutting height: 38 mm Cutting angle: 93° Special features / Compatibility ISO designation: DDJNL 2020 Compatible inserts: DN-- 1504 Cutting direction: left Shank designation: K15 Suitable for indexable inserts FAQ Which insert type fits this toolholder? The Klemmhalter is specified for DN-- 1504 indexable inserts and follows the DDJNR layout, ensuring compatibility with commonly stocked geometries for turning. Is the holder suitable for left-hand turning only? Yes, the holder is configured for left-hand turning; its geometry and clamping orientation are optimised for left-hand machining operations. What is the ISO designation and why does it matter? The ISO designation DDJNL 2020 identifies the holder geometry and size, which helps to confirm compatibility with matched inserts and turret stations when integrating the component into existing setups. How does the 93° cutting angle affect machining? A 93° cutting angle provides a slight offset that assists engagement and chip evacuation in many turning tasks; this contributes to stable cutting conditions when used with the appropriate DN-- inserts and machining parameters. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a rigid, workshop-ready toolholder that combines compatibility with DN-- 1506 indexable inserts, a compact 125 mm overall length and a precise 93° cutting angle to support stable right‑hand turning. Order the DDJNR toolholder directly via Metav Werkzeuge or consult our specialists for application guidance. DDJNR 2020 clamping toolholder — DDJNR for DN-- indexable inserts, right‑hand The DDJNR 2020 clamping toolholder is a right‑hand external turning holder designed for DN-- 1506 indexable inserts and compact lathe set-ups. Right‑hand turning configuration For DN-- 1506 indexable inserts 20 mm shank diameter for stable clamping 125 mm overall length for compact reach Stable clamping for consistent turning results A firm clamping system and a 20 mm shank profile deliver a rigid connection to the machine, which reduces vibration and improves surface finish in external turning tasks. The reduced chatter from a stable holder translates into longer insert life and fewer rework cycles. The holder’s mass (approx. 0.425 kg) contributes to damping while remaining light enough for quick tool changes, enabling efficient production without sacrificing stability. Optimised compatibility speeds set-up and changeover Designed specifically for DN-- 1506 indexable inserts and carrying the DDJNR 2020 ISO designation, the holder ensures predictable insert seating and secure locking. The 93° cutting angle produces a robust cutting geometry that supports reliable chip formation and consistent machining forces during right‑hand operations. Compatibility with a common insert format reduces inventory complexity and speeds changeover, making the holder suitable for mixed-batch and continuous turning processes. Compact geometry for accessible machining and tool clearance The toolholder’s 125 mm overall length and 25 mm cutting‑head width provide a compact footprint that improves access to tight workpiece features and reduces overhang. A cutting height of 35 mm ensures correct insert projection for standard tool post setups, while the K15 shaft designation identifies the connection style for secure mounting. The combination of compact reach and controlled geometry supports predictable tool paths and easier integration into existing turning stations. Confidence in supply and practical workshop benefits Supplied by Teknik Makina and available through Metav Werkzeuge, this holder is backed by a distribution approach focused on practical workshop reliability. Metav’s European quality filter and broad product range simplify sourcing and reduce lead times, which is particularly valuable for production environments that demand continuity. The straightforward design reduces training needs for operators while maintaining the technical precision required for repeatable turning results. Contact Metav Werkzeuge for specification support and procurement of the DDJNR 2020 clamping toolholder from Teknik Makina; our specialists assist with selection to match the machining task and insert choice Technical data Article number: D170TM Manufacturer: Teknik Makina Facts Shank height: 20 mm Shank width: 20 mm Cutting head width: 25 mm Cutting height: 35 mm Cutting angle: 93° Overall length: 125 mm Weight: 0.425 kg Cutting direction: right Special features ISO designation: DDJNR 2020 Compatible with DN-- 1506 indexable inserts Shank designation: K15 FAQ Which inserts fit this holder? The DDJNR 2020 clamping toolholder is compatible with DN-- 1506 indexable inserts and is intended for standard DN-- insert geometry. What machining tasks is the holder intended for? This holder is designed for right‑hand external turning and is appropriate for medium‑duty lathe operations where compact reach and stable cutting geometry are required. What are the key dimensions to check before ordering? Key dimensions are a 20 mm shank height, 125 mm overall length and a 35 mm cutting height; these determine fitment in the tool post and the correct insert projection. How does the 93° cutting angle affect performance? The 93° cutting angle provides a sturdy cutting edge orientation that supports consistent chip formation and improves insert life under typical turning loads. Is this holder suitable for small‑diameter work or tight setups? Yes; the 125 mm overall length and moderate head width allow improved access in confined areas compared with longer overhang holders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust combination of 125 mm cutting diameter, compatibility with CCMT 09T3 inserts and a 40 mm arbor for stable mounting to maintain throughput and minimise changeover time; order directly via Metav Werkzeuge or request specialist advice from our consultants for precise application support. Scheibenfräser DF176TM – 125 mm disc milling cutter with CCMT 09T3 insert compatibility (Teknik Makina) A Scheibenfräser DF176TM disc milling cutter engineered for indexable-insert milling, offering medium cutting heights and reliable mounting for production and workshop machining. 125 mm cutting diameter Compatible with CCMT 09T3 inserts 40 mm arbor for secure mounting 32 mm maximum axial depth of cut High material removal with controlled stability The DF176TM is designed to deliver efficient material removal thanks to its 125 mm diameter and 32 mm axial cutting depth, enabling longer passes and reduced cycle times where medium-depth milling is required. The combination of multiple cutting edges and a robust cutter body provides a predictable cutting rhythm and helps to maintain dimensional stability during longer runs. Using indexable inserts reduces downtime for regrinds, which translates into measurable process efficiency. Secure mounting and straightforward indexability Mounting and serviceability are simplified by the 40 mm arbor interface and Torx fastenings. The cutter uses M3.5×9 Torx screws with a T15 key for positive clamping of the indexable inserts, ensuring repeatable seating and quick insert changes. A cutting edge height of 14 mm accommodates the recommended CCMT 09T3 geometry, so insert indexing is rapid and repeatable while keeping setup time short and consistency high across batches. Versatile role in workshop and small-batch production Built for indexable-insert milling tasks, the tool accepts CCMT 09T3 inserts, allowing selection of grades and chipbreakers appropriate to specific operations. The modular nature of the cutter head supports economical maintenance: worn inserts are replaced rather than the entire tool, lowering cost-per-cut. For material-specific recommendations and optimal insert grades, consult Metav Werkzeuge to match cutting grades with application requirements and machine capability. Practical handling and operational advantages At approximately 0.871 kg, the cutter body is light enough for easy handling while remaining rigid in-clamp, reducing operator fatigue during tooling changes and inspection. Twelve cutting edges provide frequent indexing intervals, supporting continuous production with minimal interruption. The modular screw-and-insert system also supports predictable inventory management: standard CCMT 09T3 inserts are widely available from multiple suppliers, simplifying supply chains and ensuring rapid replacement when needed. Contact Metav Werkzeuge in Emmerich for tailored guidance on integrating the Teknik Makina DF176TM disc milling cutter into production, or to arrange supply and specification matching by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: DF176TM Manufacturer: Teknik Makina Designation: Scheibenfräser ECLASS: 21180704 ETIM: EC011860 Core technical data Diameter: 125 mm Cutting edges: 12 Cutting height: 14 mm Maximum axial depth of cut: 32 mm Arbor / shank diameter: 40 mm Weight: 0.871 kg SKU: DF176TM Special features Compatible with CCMT 09T3 indexable inserts Torx screw: M3.5×9 Torx key size: T15 Ideal for indexable-insert milling operations FAQ What insert type does this cutter accept? The DF176TM accepts CCMT 09T3 indexable inserts; the cutter body is configured for their seating and clamping. What is the maximum axial depth of cut? The cutter offers a maximum axial cutting depth of 32 mm, enabling medium-depth milling operations. Which arbor size is required for mounting? A 40 mm arbor or suitable adapter is required for secure mounting of the cutter body. How many cutting edges are available before indexing? The tool body provides 12 cutting edges, allowing frequent indexing and extended tool life through insert changes. Is specialised tooling required to change the inserts? Insert clamping uses M3.5×9 Torx screws with a T15 key, providing straightforward and secure insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a robust Ø125 mm cutting diameter with compatibility for CCMT 1204 indexable inserts, this tool delivers consistent material removal and straightforward insert changes. The secure 40 mm arbor and 20 mm cutting height give stable operation and predictable results; order the disc cutter directly via Metav Werkzeuge or ask our consultants if needed. Indexable Disc Cutter DF180TM – Ø125 mm, for CCMT 1204 inserts (Teknik Makina) An indexable disc cutter DF180TM designed for industrial slotting and face milling, offering simple insert replacement and secure mounting for production use Ø125 mm cutting diameter Compatible with CCMT 1204 inserts 10 cutting edges for smooth removal 40 mm arbor, 20 mm cutting height High productivity through optimised geometry The DF180TM delivers reliable chip evacuation and steady cutting performance thanks to its balanced geometry and multiple cutting edges. With a Ø125 mm diameter and 10 cutting edges, the tool reduces vibration and distributes wear, which maintains surface finish over longer runs. The axial allowance of 32 mm (ap) enables deeper passes where process planning permits, increasing throughput while preserving dimensional consistency. This makes the cutter suitable for batch production and repetitive milling tasks where predictable cycle times matter. Quick maintenance and shorter machine downtime Designed for efficient service, the disc cutter accepts common CCMT 1204 indexable inserts and secures plates with M5x12 Torx screws operated by a T20 key. This standardised approach simplifies toolholding logistics on-site: replacement inserts are widely available and clamping is straightforward, reducing refit times. The 40 mm arbor interface provides a rigid connection to many toolholders, improving run-out stability and lowering the risk of premature insert wear — a direct benefit to workshop productivity and process reliability. Robust mounting and practical handling for production environments With a 20 mm cutting height and a compact overall mass of 1.43 kg, the cutter combines rigidity with manageable handling during tool changes. The indexable design permits targeted use of individual inserts until wear demands replacement, minimising consumable costs compared with full-bodied cutters. Built for integration into standard milling setups that accept a 40 mm mounting, this disc cutter supports both face and slotting operations where a secure arbor and repeatable clamping are prerequisites for consistent quality. Discuss procurement and tooling optimisation with Metav Werkzeuge — contact our Emmerich team by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for technical advice and to arrange supply of the Teknik Cutting Tools indexable disc cutter. Technical Data Article number: DF180TM Manufacturer: Teknik Makina Product designation: Disc cutter Facts Diameter: 125 mm Cutting edges: 10 Arbor / mounting diameter: 40 mm Cutting height: 20 mm Axial depth (ap): 32 mm Weight: 1.43 kg Compatible inserts: CCMT 1204 Torx screw: M5x12 Torx key: T20 Special features Indexable insert design Accepts CCMT 1204 inserts Balanced 10-edge geometry for reduced vibration Secure clamping with M5x12 Torx screws 40 mm arbor for rigid mounting FAQ Which inserts are compatible with this cutter? The DF180TM is designed for CCMT 1204 indexable inserts; these standard inserts are suited to straightforward replacement and are widely available. What arbor size is required for mounting? This disc cutter uses a 40 mm arbor connection, providing a rigid interface for many common toolholders. How many cutting edges does the tool have and why that matters? The cutter has 10 cutting edges, a configuration that balances load distribution, reduces vibration and helps maintain surface quality during longer cycles. What fasteners are used for insert clamping and which key is required? Insert plates are secured with M5x12 Torx screws and require a T20 Torx key for changing inserts. Is the tool suitable for deeper axial cuts? With an axial allowance of 32 mm, the cutter supports deeper passes where the machine capability and process parameters permit, enabling higher material removal when needed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a 125 mm cutting diameter with a 40 mm arbor interface and compatibility with SCMT 09T3 indexable inserts, this disc cutter provides stable material removal and straightforward insert changes for medium batch production. Order the tool via Metav Werkzeuge or consult the specialists in Emmerich for machining recommendations. DF100TM Disc cutter – 125 mm diameter, SCMT 09T3 compatible (Teknik Makina) The DF100TM is a precision indexable disc cutter designed for medium-duty milling tasks, offering a 125 mm diameter and a compact form factor suited to CNC milling stations and production tooling applications 125 mm cutting diameter for medium milling Accepts SCMT 09T3 indexable inserts 40 mm arbor mounting for rigid clamping 10 mm effective cutting height Maximised productivity through measured cutting capacity Engineered for repeatable milling in production environments, the tool combines a 125 mm cutting diameter with an axial allowance of ap 32 mm to support robust material removal on medium-sized workpieces. The greater diameter increases the chip engagement per revolution, which can shorten cycle times while maintaining process stability. This geometry is advantageous where predictable chip load and consistent surface quality are required across several parts, enabling reliable planning of machining cycles and tool life. Faster insert changes and predictable operating costs On the DF100TM, tool life and changeover efficiency are supported by SCMT 09T3 indexable inserts and a 10 mm cutting height that allow flexible use between finishing and semi‑roughing passes. Insert clamping is achieved with M4x11 Torx screws tightened via a T15 key, providing standardised, repeatable fixation that reduces variation in clamping torque and minimises downtime. The indexable-insert concept lowers per-part tooling cost by permitting multiple re‑indexes before replacement, improving overall cost efficiency in serial production. Secure mounting, improved surface quality and process reliability The cutter’s 40 mm arbor interface and compact mass of 0.612 kg promote rigid clamping and reduced vibration when mounted correctly, which contributes directly to better surface finishes and longer insert life. The tool’s dimensions and standardised fasteners support straightforward set-up on common toolholders and predictable runout characteristics. For planners and operators, these attributes translate into fewer unexpected interruptions and a more consistent production output. For tailored machining recommendations or to procure the Teknik Cutting Tools DF100TM disc cutter with SCMT 09T3 compatibility, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: DF100TM Brand: Teknik Makina eClass: 21180704 ETIM: EC011860 Numeric data Diameter: 125 mm Cutting height: 10 mm Arbor bore: 40 mm Axial capacity: 32 mm Weight: 0.612 kg Special features Compatible with SCMT 09T3 indexable inserts Torx screw M4x11 for insert fixation Torx key T15 for tightening Related files available (2) Brand: Teknik Makina FAQ Which insert type fits the cutter? The cutter is designed for SCMT 09T3 indexable inserts; these inserts provide multiple cutting edges for economical re‑indexing in the DF100TM. What arbor size is required for mounting? A 40 mm arbor bore is specified for correct mounting of the DF100TM to ensure stable clamping and predictable runout. How does the tool support surface quality? The DF100TM’s combination of diameter, axial allowance (ap 32 mm) and compact mass (0.612 kg) promotes rigid clamping and reduced vibration, which helps achieve consistent surface finishes. How are the inserts secured? Inserts are fixed with M4x11 Torx screws and tightened using a T15 key, providing standardised, repeatable clamping for reliable insert retention. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-performance indexable disc cutter that pairs CCMT 0602 inserts with a 125 mm diameter and a 32 mm axial cutting depth for reliable milling throughput; order directly via Metav Werkzeuge or contact the consultants for application advice. Disc milling cutter DF172TM — indexable disc cutter, Ø125 mm, CCMT 0602 (Teknik Makina) A Disc milling cutter DF172TM engineered for indexable CCMT 0602 inserts, offering medium-depth milling capability for a wide range of workshop and production processes. Ø125 mm cutting diameter Compatible with CCMT 0602 inserts ap 32 mm axial cutting depth 14 cutting edges for sustained material removal 40 mm mounting diameter for solid clamping Increased productivity through optimised cutting geometry The first benefit of this tool is its focus on efficient material removal: with a Ø125 mm cutter body and 14 cutting edges, the design spreads cutting forces across multiple teeth to maintain a steady chip load and reduce vibration. The ap 32 mm axial depth enables deeper passes than comparable small-diameter cutters, which can cut cycle times and reduce the number of tool changes. This configuration suits repetitive milling tasks where process stability and throughput are priorities, delivering a measurable productivity improvement without complex setup changes. Quick maintenance and secure mounting to reduce downtime Maintenance and insert replacement are straightforward thanks to standard fastenings and a robust holder interface. The tool uses Torx screws (M2.5x7) secured with a T08 key and a 40 mm mounting diameter that mates with common tool holders for a secure fit. The cutting height 10 mm ensures enough insert projection for economical indexing and straightforward chip control. These features translate into lower downtime during routine service and predictable maintenance intervals, supporting continuous operation on the shop floor. Familiar indexable system for flexible tooling strategies Accepting CCMT 0602 inserts, the cutter ties into an established insert family that is widely available and offered in multiple grades. This compatibility enables flexible choices between grades and coatings to match cutting conditions, while the modest weight 0.703 kg keeps handling easy for manual tool changes and reduces centrifugal load during high-speed rotation. Backed by a reputable manufacturer and supplied through Metav’s logistics, the unit provides a practical balance of flexibility and reliability for milling operations where standardisation and rapid replenishment matter. Contact Metav Werkzeuge GmbH in Emmerich for tailored technical advice or to arrange supply of the Teknik Makina DF172TM disc milling cutter with CCMT 0602 compatibility; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: DF172TM Name: Disc milling cutter Manufacturer: Teknik Makina Eclass: 21180704 ETIM: EC011860 Core specifications Diameter: 125 mm Axial cutting depth (ap): 32 mm Mounting diameter: 40 mm Cutting height: 10 mm Number of cutting edges: 14 Weight: 0.703 kg Materials & special features Compatible inserts: CCMT 0602 Torx screw: M2.5x7 Torx key size: T08 File references: 62de7eeebd24461b3d5f7a83, 62de7e5f33927e49dbf32752 FAQ What insert type does the cutter accept? The cutter is designed for CCMT 0602 indexable inserts, a common format that offers a variety of grades for different materials and cutting conditions. How deep can the tool cut in a single pass? The tool supports an axial cutting depth of 32 mm (ap 32 mm), enabling deeper passes than many small-diameter cutters while maintaining controlled chip engagement. What is the mounting interface for the cutter? The body has a 40 mm mounting diameter to fit standard holders and clamping systems, providing a rigid connection for stable milling. How are the inserts secured and serviced? Inserts are fastened with Torx screws M2.5x7 tightened using a T08 key, allowing quick insert changes and consistent clamp torque for minimal setup time. Is the cutter heavy to handle for manual tool changes? The cutter weight is approximately 0.703 kg, making it easy to handle during manual tool changes while remaining robust in operation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a combination of high material removal and easy maintenance: the DF170TM delivers stable machining with its Ø125 mm diameter and 14 indexable inserts, while the compact 40 mm arbor minimises run-out. Order the cutter directly via Metav Werkzeuge or consult our specialists for application advice. DF170TM Indexable Disc Cutter — Ø125 mm, for CCMT 0602 inserts (Teknik Makina) A DF170TM indexable disc cutter engineered for efficient slotting and side milling in industrial CNC applications. Ø125 mm cutter diameter 14 indexable CCMT 0602 inserts 40 mm arbor / toolholder diameter 8 mm cutting height Maximise throughput with predictable cutting performance The cutter head is designed to provide consistent chip evacuation and steady material removal, making it suitable for medium-duty milling operations. With a Ø125 mm diameter and 14 indexable inserts, the tool distributes cutting forces evenly, which reduces vibration and supports higher feed rates. This results in improved cycle times and a more stable surface finish compared with single-point tooling. The combination of insert count and geometry is intended to balance productivity and tool life, offering a predictable machining window for series production. Fast servicing and cost-efficient tooling changeovers Indexable inserts of the CCMT 0602 format allow economical reconditioning: worn inserts are replaced quickly without removing the body from the spindle. Secured by M2.5x7 Torx screws (Torx key T08), the clamping system is straightforward and repeatable, reducing downtime during tool changes. The modular approach separates consumable costs from the cutter body, which is beneficial for workshops aiming to lower per-part tooling expenses while maintaining consistent component quality. Rigidity and accurate mounting for precise results A precise 40 mm arbor interface provides secure seating in compatible toolholders and minimises run-out for improved concentricity. The cutter’s 8 mm cutting height and axial capacity (ap 32 mm) are matched to the insert size and cutter geometry to deliver stable cutting conditions. The compact mass (approx. 0.512 kg) eases handling during set-up while the robust construction supports repeatable positioning, which is essential for geometric accuracy in serial milling operations. Practical applications and integration into the workshop This disc milling head is suitable for integration into CNC milling centres and production machines that accept a 40 mm arbor. The tool is adapted for indexable CCMT 0602 inserts, which are widely available in different grades to suit varied materials and cutting conditions. As an industrial partner, Metav Werkzeuge provides reliable supply from Emmerich, offering a consistent sourcing route for replacements and spares to keep production running without interruption. For tailored application support and reliable supply from our Emmerich hub, contact Metav Werkzeuge for a specification review and to place an order for the Teknik Makina DF170TM — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: DF170TM Manufacturer: Teknik Makina For indexable inserts: CCMT 0602 Torx screw: M2,5x7 Torx key: T08 Facts Diameter: 125 mm Cutting height: 8 mm Axial depth (ap): 32 mm Arbor / toolholder diameter: 40 mm Number of cutting edges: 14 Weight: 0.512 kg Special features Indexable insert system Compact mass for easy handling Securing with Torx screws Compatible with standard CCMT 0602 inserts FAQ What insert type does the cutter accept? The cutter accepts CCMT 0602 indexable inserts; the DF170TM is configured for this standard insert format for straightforward sourcing and replacement. Which arbor or toolholder size is required? A 40 mm arbor or toolholder interface is required for correct seating and minimal run-out with this disc milling head. How many inserts are used on the cutter? This model is equipped with 14 cutting positions, enabling distributed cutting forces and steady chip formation. What securing hardware is supplied for the inserts? Inserts are fixed with M2.5x7 Torx screws and require a T08 Torx key for tightening and removal. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a 125 mm diameter and 12 mm cutting height with compatibility for CCMT 09T3 indexable inserts, this disc milling cutter offers efficient material removal and straightforward insert changes; order the tool through Metav Werkzeuge or request technical advice from our consultants to ensure optimal integration into production. Disc milling cutter DF174TM by Teknik Makina — Ø125 mm, for CCMT 09T3 inserts The Disc milling cutter DF174TM is a robust indexable tool for general milling operations and slotting, designed for rigid mounting with a 40 mm bore and focused material removal in workshop and light-production environments. Ø125 mm diameter for stable cutting 12 mm cutting height for deep engagement Accepts CCMT 09T3 indexable inserts 40 mm bore for rigid toolholding Fast, stable cutting for consistent cycle times The DF174TM combines a Ø125 mm body with a 12 mm cutting height and a nominal 32 mm depth of cut, delivering a balance between engagement and stability that supports predictable cycle times. The relatively large 40 mm bore improves clamping rigidity in standard toolholders, reducing vibration and promoting consistent edge life for indexable inserts. This results in measurable production gains where predictable stock removal and repeatability are required, particularly for short-series and batch production environments. Flexible insert concept reduces downtime and tooling cost Designed for CCMT 09T3 indexable inserts, the cutter allows quick insert replacement without disturbing the toolbody, so edge changes are straight forward and downtimes are minimised. The compatibility with a common insert family means spare parts are widely available, helping to contain operating costs. By separating the cutting geometry from the tool body, maintenance tasks become simpler and service intervals are easier to plan, which supports continuous operation on mixed-machining schedules. Practical mounting and service details for workshop integration Key assembly elements are engineered for practical workshop use: torx screws M3.5×9 (Torx key T15) secure the inserts, and the total tool mass of 0.75 kg contributes to controlled balancing in many spindle systems. These mechanical details help shorten setup times and improve repeatability when the cutter is integrated into existing tool cycles. The robust construction and standardized fixing method make the milling head suitable for retrofit into conventional holders that accept a 40 mm arbor. Productivity benefits that matter on the shop floor With its combination of diameter, cutting height and insert strategy, the cutter supports higher material removal rates while keeping tooling expenditure predictable. The modular insert approach provides a clear cost-benefit through longer usable toolbody life and faster on-machine service. For production managers seeking to increase throughput without extensive process changes, the DF174TM delivers a pragmatic upgrade path that balances performance and maintainability while aligning with established workshop practices. For procurement or application advice on the Teknik Makina DF174TM disc milling cutter, contact Metav Werkzeuge for tailored recommendations and reliable supply — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: DF174TM Manufacturer: Teknik Makina eClass: 21180704 ETIM: EC011860 Core technical data Diameter: 125 mm Cutting height: 12 mm Depth of cut (ap): 32 mm Bore / holder diameter: 40 mm Weight: 0.75 kg Number of cutting edges: 12 Special features For indexable inserts CCMT 09T3 Torx screws M3.5×9 Torx key T15 FAQ What type of inserts does the DF174TM use? The DF174TM is configured for CCMT 09T3 indexable inserts, which allow rapid edge changes and consistent cutting geometry. How is the cutter mounted to the arbor? Mounting is via a 40 mm bore, enabling rigid clamping in compatible toolholders for improved stability during milling. What is the maximum cutting engagement for this cutter? Technical data indicates a cutting height of 12 mm and a depth of cut of 32 mm, offering substantial engagement for robust material removal. Are the screws and tools for insert replacement standard? Insert fixation uses torx screws M3.5×9 with a T15 key, providing a standard, workshop-friendly service routine. What weight should be expected for handling and balancing? The milling head has a mass of 0.75 kg, which supports controlled balancing in typical spindle setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precise indexable cutting, a generous 20 mm cutting height and a secure 40 mm arbor interface for reliable slotting and face-milling operations; order directly via Metav Werkzeuge or consult the Metav team for application advice. Scheibenfräser DF106TM — disc milling cutter with 125 mm diameter, for SCMT 1204 inserts (Teknik Makina) The Scheibenfräser DF106TM is an indexable disc cutter designed for efficient slotting and peripheral milling on CNC milling machines and machining centres Disc milling cutter 125 mm diameter Accepts SCMT 1204 indexable inserts 20 mm effective cutting height 40 mm tool holder diameter Accurate slotting with indexable inserts for consistent part quality The DF106TM delivers repeatable slotting and profiling thanks to its compatibility with SCMT 1204 indexable inserts. The use of proven insert geometry reduces downtime for regrinding and enables a predictable tool life, which in turn stabilises process capability. With a 125 mm outer diameter and 10 cutting edges, the cutter is suited to medium‑duty milling where consistent edge condition and easy indexability are priorities. The modular design translates into straightforward maintenance and predictable replacement cycles, supporting continuous production schedules with minimal variation. Secure clamping and stable engagement for higher material removal rates A solid connection to the spindle is provided by the 40 mm arbor interface and the included Torx fixing hardware (M5x12, T20), which together ensure rigid clamping and accurate concentricity during heavy cutting. The cutter offers a 20 mm cutting height and is specified for a 32 mm depth of cut capacity, making it effective for deep slotting or substantial face passes when paired with appropriate inserts. The resulting combination of rigidity and engagement stability reduces vibration, enhances surface finish and allows operators to exploit higher feeds and depths where the machining setup permits. Practical application scope and productivity features for the workshop Intended for production and jobbing shops, this indexable disc cutter supports efficient changeover and stock management through common insert formats. The use of SCMT 1204 inserts simplifies inventory and provides access to a wide range of grades for steel, stainless and non‑ferrous materials as process needs demand. At a tool weight of approximately 1.167 kg, the assembly is balanced for stable spindle running without imposing excessive load on toolholders. The modular nature of the toolholder and standardised screws enables rapid on‑bench servicing and fast return to production, improving overall throughput. For reliable high‑performance slotting with Teknik Makina quality, contact Metav Werkzeuge in Emmerich for tailored advice and dependable supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DF106TM Designation: Scheibenfräser Manufacturer: Teknik Makina ECLASS: 21180704 ETIM: EC011860 Facts Diameter: 125 mm Cutting height: 20 mm Depth of cut (ap): 32 mm Arbor/holder diameter: 40 mm Number of cutting edges: 10 Weight: 1.167 kg Special features Compatible inserts: SCMT 1204 Torx screw: M5x12 Torx key size: T20 Indexable insert system for fast replacement Balanced disc design for high spindle speeds FAQ What insert type does the cutter use? The cutter accepts SCMT 1204 indexable inserts; this format facilitates quick indexing and a broad choice of grades for different materials. Can the DF106TM perform deep slotting passes? Yes, the DF106TM has a 20 mm cutting height and is specified for up to 32 mm depth of cut, enabling significant material removal in a single pass when set up correctly. Which arbor diameter is required for mounting? A 40 mm tool holder or arbor seat is required to mount the DF106TM securely in the spindle or arbor system. Are the fixing screws and key included with the tool? The tool is specified with Torx fixing hardware M5x12 and a T20 key size; these items are listed in the technical data for correct assembly and maintenance. Is the disc suitable for high‑speed machining? The balanced design and standardised mounting make the cutter compatible with higher spindle speeds typical in CNC machining, subject to insert grade and cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Eckmesserkopf für ANKX 1706 Wendeplatten Eckmesserkopf für präzise Außenbearbeitung mit Innenkühlung, geeignet für ANKX 1706 Wendeplatten und schnelle Werkzeugwechsel 125 mm Durchmesser für stabile Aufnahme Innenkühlung verbessert Spanabfuhr und Standzeit Geeignet für ANKX 1706 Wendeplatten von ISCAR 8 Schneiden für wirtschaftliche Zerspanung Montage mit Torx Schlüssel T20 Hohe Produktivität durch durchdachte Konstruktion Der Eckmesserkopf kombiniert robuste Mechanik mit praxisorientierten Funktionen, die direkt auf Effizienz abzielen. Die 8 Schneiden verteilen die Schnittlast und reduzieren Ausfallzeiten durch schnelleres Umstechen, während der Schnittwinkel 90° eine präzise Flächenbearbeitung ermöglicht. Der Einsatz von ANKX 1706 Wendeplatten sorgt für eine bewährte Schneidstofflösung; das Werkzeug ist ausdrücklich geeignet für Wendeplatten des Herstellers ISCAR, was die Versorgung mit Verbrauchsmaterial vereinfacht und Lagerprozesse optimiert. Innenkühlung und Prozesssicherheit für längere Standzeiten Die integrierte Innenkühlung führt das Kühlmittel direkt zum Schneidspalt und verbessert dadurch Spanbruch und Wärmeabfuhr erheblich. Das Resultat ist eine stabilere Schnittkante und eine verlängerte Lebensdauer der Wendeplatten, was die Gesamtkosten pro Bauteil senkt. Durch die gezielte Kühlmittelzufuhr lassen sich zudem Schnittkräfte reduzieren und Oberflächenqualität steigern, was besonders bei anspruchsvollen Werkstoffen von Vorteil ist. Einfache Montage und geprüfte Kompatibilität Der Werkzeugkopf ist für schnelle Wechsel und sichere Spannvorgänge ausgelegt. Die Montage erfolgt mit dem mitgelieferten Torx Schlüssel T20, der sich in der Praxis bewährt hat und wiederholgenaues Anziehen der Schrauben ermöglicht. Mit einem Durchmesser von 125 mm und einer Gesamtlänge von 63 mm bietet der Kopf eine stabile Auflage, die sich in verschiedenen Spannaufnahmen einsetzen lässt. Die konstruktive Abstimmung auf ANKX 1706 Wendeplatten macht den Einsatz planbar und reduziert Einrichtzeiten. Empfehlung: Direkt über Metav Werkzeuge bestellen oder technische Beratung anfragen per eMail info@metav-werkzeuge.com bzw. Telefon +49 2822 7131930 Produktmerkmale Bezeichnung: Eckmesserkopf für ANKX 1706 Wendeplatten SKU: T450-1TM Hersteller: Teknik Makina Produktart: Eckmesserkopf Fakten Aufnahme Ø: 40 mm Durchmesser: 125 mm Gesamtlänge: 63 mm Schneiden: 8 Schnittwinkel: 90° Gewicht: 3.591 kg Torx Schlüssel: T20 Besonderheiten Innenkühlung: ja (Kühlmittelzufuhr durch Werkzeugkörper) Passend für Wendeplattenhersteller: ISCAR (geeignet für ANKX 1706) Für Wendeplatten: ANKX 1706 FAQ Wie wird der Eckmesserkopf montiert? Die Montage des Eckmesserkopfs erfolgt über die definierte Aufnahme mit 40 mm Aufnahme Ø; die Schrauben werden mit dem Torx Schlüssel T20 angezogen. SKU T450-1TM ermöglicht eine schnelle Einbindung in bestehende Spannsysteme. Für welche Wendeplatten ist das Werkzeug ausgelegt? Der Eckmesserkopf ist ausgelegt für ANKX 1706 Wendeplatten und wurde kompatibel zu Wendplatten des Herstellers ISCAR konstruiert, um eine einfache Beschaffung und hohe Verfügbarkeit zu gewährleisten. Welchen Vorteil bietet die Innenkühlung? Die Innenkühlung verbessert Spanabfuhr und Wärmeabfuhr direkt am Schneidspalt, was zu längeren Standzeiten der ANKX 1706 Wendeplatten und besserer Oberflächenqualität führt. Wie trägt die Anzahl der Schneiden zur Wirtschaftlichkeit bei? Mit 8 Schneiden verteilt sich die Schnittlast auf mehrere Zähne, wodurch Umstechzyklen reduziert werden und die produktive Laufzeit pro Werkzeug erhöht wird. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a 125 mm diameter with a 43° cutting angle and eight cutting edges, this tool delivers robust material removal and consistent surface quality for facing operations. Order the Planing Cutter Head directly via Metav Werkzeuge or consult the technical team for further specification support. Planing Cutter Head T213TM — 125 mm diameter, for ODHT 0605 indexable inserts (Teknik Makina) The Planing Cutter Head is engineered for industrial facing and planing work, offering reliable insert clamping and optimised chip flow for efficient metal removal in production environments 125 mm diameter for broad stock removal Compatible with ODHT 0605 indexable inserts 8 cutting edges for steady material engagement 40 mm shank for secure toolholder mounting High-efficiency material removal with predictable results The head combines a 125 mm diameter with a 43° cutting angle to balance aggressive cutting with controlled chip formation, which reduces machining time while preserving surface integrity. Fitted with eight cutting edges, the design distributes load over multiple teeth, lowering peak forces and extending insert life. The result is a measurable improvement in cycle time and tool-change intervals, making the head particularly suitable for repetitive facing operations where throughput and repeatability are priorities. Technical buyers and production planners will appreciate the clear link between geometry and process efficiency, with documented gains in stability and reduced vibration during heavy cuts. Secure clamping and straightforward workshop handling Mounting and maintenance follow a practical, workshop-friendly concept: the tool uses a 40 mm shank for stable connection to standard holders, while the insert is fastened with a Torx M5x12 screw driven by a T20 key for reproducible torque and quick serviceability. Such details ensure that downtime for insert changes is minimal and that clamping forces remain consistent across shifts. The overall length of 62 mm and a mass of 3.528 kg give the assembly the rigidity required for precision-facing tasks, helping to maintain tolerances on critical surfaces. Clear mechanical interfaces mean compatible holders and changeover procedures can be standardised across a shopfloor, lowering training time and process variance. Compatibility, integration and workshop benefits Designed for the ODHT 0605 insert family, with compatibility noted for Walter-manufactured inserts, the cutter head integrates seamlessly into existing toolsets. The specification "for ODHT 0605 indexable inserts" simplifies procurement and inventory planning: the same inserts can be used across multiple toolholders, reducing SKUs and stocking complexity. The configuration supports consistent chip control and predictable wear patterns, helping maintenance teams to plan preventive insert rotation. Built by Teknik Makina and supplied via Metav Werkzeuge, the component is intended for industrial users who prioritise precision, compatibility and operational reliability across medium- to high-volume machining applications. For enquiries about suitability in a specific machining setup or to request detailed drawings, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 for precise specification support and procurement assistance. Technical Data Article number: T213TM Description: Planmesserkopf Secondary description: for ODHT 0605 Indexable Inserts Manufacturer: Teknik Makina Facts Diameter: 125 mm Shank diameter (d): 40 mm Overall length: 62 mm Weight: 3.528 kg Cutting angle: 43° Cutting edges: 8 Special features Compatible with ODHT 0605 indexable inserts Compatible inserts manufacturer: Walter Torx screw: M5x12 Torx key: T20 FAQ Which inserts fit this cutter head most effectively? The Planing Cutter Head T213TM is specified for ODHT 0605 indexable inserts; Walter-manufactured ODHT 0605 inserts are directly compatible and recommended for predictable performance. What are the mounting requirements for the toolholder? Mounting requires a toolholder accepting a 40 mm shank diameter; the head’s geometry and mass (3.528 kg) should be matched to holders rated for heavy-duty facing. How does the cutting geometry affect surface finish? The 43° cutting angle of the head reduces cutting forces and improves chip evacuation, which helps to achieve a consistent surface finish during facing operations with the ODHT 0605 inserts. How many cutting edges are engaged and what is the operational benefit? The head has eight cutting edges, distributing load across multiple inserts to lower individual insert stress and extend service life while maintaining steady material removal. Which fasteners are used for insert clamping? Insert clamping is secured with a Torx M5x12 screw, tightened using a T20 key to ensure reproducible torque and fast insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust face milling solution that combines a 125 mm diameter, 8 cutting edges and a 45° cutting angle to deliver consistent material removal and smooth surface finishes. Order the Planmesserkopf directly via Metav Werkzeuge or consult our specialists for application-specific recommendations and stock information. Planmesserkopf T305TM — Face milling head, Ø125 mm, 8 cutting edges (Teknik Makina) The Planmesserkopf is a face milling head engineered for heavy-duty machining with SDHT 1204 indexable inserts, ideal for workshop and production environments requiring reliable tool life and quick insert changes. Diameter 125 mm for broad coverage Eight cutting edges for high material removal 45° cutting angle for smooth finishing Engineered for efficient and predictable face milling The T305TM is designed as a high-efficiency face milling head: its 125 mm body and 8 cutting edges provide a balance between cutting capacity and surface quality, while the 45° cutting angle reduces axial load and promotes smoother chip evacuation. The result is faster cycle times and more consistent dimensional results compared with smaller heads. The solid Ø40 mm clamping bore ensures secure mounting in standard toolholders, supporting stable cutting forces and repeatable set-ups. Fast insert changes and straightforward workshop handling Compatibility with SDHT 1204 indexable inserts enables rapid index and replacement of cutting edges, reducing machine downtime and simplifying inventory logistics. The head is secured using a M4,5x11 Torx screw operated with a T15 key, which is a commonly available interface in toolrooms and minimises changeover complexity. This practical assembly approach supports lean production workflows and makes the tool suitable for both series production and flexible job-shop applications. Robust construction for dependable service life and supply security Built for everyday industrial use, the milling head’s mass (approx. 4.095 kg) and overall length of 62 mm reflect a sturdy design that resists vibration and wear during sustained operation. A maximum cutting diameter of 139 mm allows effective engagement on broader faces where required. Sourcing through Metav adds a layer of supply reliability and quality assurance, backed by a broad product range and an experienced distribution hub in Emmerich that streamlines procurement for workshops and industrial buyers. Contact Metav Werkzeuge for precise application advice on Teknik Cutting Tools face milling heads such as the Planmesserkopf T305TM and secure reliable delivery and stock information from Emmerich. Technical data SKU: T305TM Manufacturer: Teknik Makina Product name: Planmesserkopf for SDHT 1204 indexable inserts Facts Diameter: 125 mm Max cutting diameter: 139 mm Number of cutting edges: 8 Clamping bore: Ø 40 mm Overall length: 62 mm Weight: 4.095 kg Cutting angle: 45° Special features Compatible with SDHT 1204 indexable inserts Torx screw M4,5x11 Torx key size T15 Designed for face milling applications FAQ Which inserts fit this milling head? The Planmesserkopf accepts SDHT 1204 indexable inserts, enabling standardised insert handling and simple replacement. What is the mounting interface for the head? Mounting is via a 40 mm clamping bore, compatible with toolholders designed for Ø40 mm shanks. What maximum cutting diameter does the head support? The head supports a maximum cutting diameter of 139 mm, allowing wider face passes when required. How many cutting edges are available on the cutter? The tool features 8 cutting edges, optimised for effective material removal and improved surface finish. Which fastening hardware is required for insert clamping? Insert clamping uses a M4,5x11 Torx screw and requires a T15 Torx key for secure and repeatable fixing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, productivity‑focused face milling solution that combines stable cutting geometry and wide compatibility with common indexable inserts; order directly via Metav Werkzeuge or consult our specialists for application advice. Face milling head T438TM — for SEET 12T3 R245 indexable inserts, Ø125 mm, 8 cutting edges (Teknik Makina) The Face milling head T438TM is a heavy‑duty cutter head for high‑efficiency face milling with SEET R245 12T3 indexable inserts, ideal for industrial and workshop CNC applications Ø125 mm diameter for stable cutting 8 cutting edges for high productivity 40 mm shank for secure mounting Compatible with Sandvik, XTC, ZCC inserts High throughput and consistent surface quality from optimised geometry The milling head is engineered to deliver stable metal removal through a combination of a large Ø125 mm body and a 45° cutting angle that balances profile control with chip evacuation. This geometry reduces chatter and supports uniform tool engagement, which translates into predictable cycle times and improved surface finish. Using eight cutting edges spreads cutting loads, enabling longer cutting lengths per tool change and fewer interruptions to production, which helps maintain flow on milling centres and vertical machining centres. Secure clamping, quick service and straightforward spare parts A 40 mm shank provides a rigid connection to suitable toolholders, improving runout resistance and positional stability when taking heavier cuts. Fast replacement of indexable inserts is supported by a M3.5x8.5 Torx screw and a T15 key, allowing maintenance teams to exchange inserts quickly with standard hand tools. Fewer and faster tool changes reduce downtime and simplify workshop logistics, while robust fastening reduces the risk of unexpected loosening under load. Wide compatibility reduces tooling complexity and increases flexibility The cutter head accepts SEET R245 12T3 inserts and is compatible with well‑known insert manufacturers such as Sandvik, XTC and ZCC, which widens the choice of grades and geometries for varied materials and cutting strategies. This flexibility supports economical tooling strategies: abrasive or tougher grades can be applied for cast and hardened workpieces, while tougher substrate or sharper grades can be selected for aluminium and general steel operations. The result is a single cutter head that adapts to multiple jobs, simplifying kit lists and purchasing. Contact Metav Werkzeuge for tailored application support and to check local stock and delivery from our Emmerich hub — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: T438TM Product: Face milling head for SEET 12T3 R245 indexable inserts Brand: Teknik Makina Diameter: 125 mm Cutting edges: 8 Overall length: 62 mm Shank (mount) diameter: 40 mm Weight: 3.427 kg Cutting angle: 45° Compatible inserts: SEET R245 12T3 Compatible insert manufacturers: Sandvik, XTC, ZCC Fixing screw: M3.5x8.5 Torx Torx key: T15 FAQ What insert type is required for this cutter head? The cutter head is designed for SEET R245 12T3 indexable inserts and accepts standard sizes from recognised manufacturers such as Sandvik, XTC and ZCC. Which shank diameter and toolholders are compatible? The tool uses a 40 mm shank diameter; pairing with a matching 40 mm toolholder or arbor ensures correct clamping and runout performance. How many cutting edges does the head carry and what are the benefits? This milling head carries 8 cutting edges, which spreads cutting forces for smoother operation and extends time between insert changes. Is the mounting hardware included for replacement inserts? Fixing is by M3.5x8.5 Torx screws; the head is compatible with standard Torx maintenance procedures using a T15 key. Can the head be used for heavy roughing and finishing passes? With its 45° cutting angle and robust body, the head is suitable for a range of operations from bulk material removal to semi‑finishing, depending on insert grade and machine capability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com