Gibt es einen Hahn und Kolb Online Shop?

Taking advantage of a compact design and compatibility with common indexable inserts ensures reliable boring operations and straightforward tooling management; order the cartridge directly via Metav Werkzeuge or consult the specialists for application advice. Cartridge THB03TM — 09–18 mm boring-tool cartridge, compatible with CCMT 0602 (Teknik Makina) A Cartridge THB03TM engineered for boring-tool sets to cover internal diameters from 09–18 mm, designed for use with CCMT 0602 indexable inserts. Suitable for 09–18 mm boring diameters Compatible with CCMT 0602 inserts Retained with M2.5 x 4.7 Torx screw Torx interface: T8 Consistent insert compatibility reduces tooling complexity The Cartridge THB03TM is built to accept CCMT 0602 indexable inserts, a widely used size in metalworking. This compatibility delivers clear operational benefits: interchangeability between toolholders and inserts reduces inventory variety and simplifies reordering. For workshops that fit multiple machines, the result is less idle time due to changeovers and lower overall tooling expenditure. The use of internationally established insert standards also supports predictable machining results and easy sourcing of replacements. Secure clamping for reliable repeatability A small but decisive component is the retaining hardware: the cartridge secures inserts with an M2.5 x 4.7 Torx screw and uses a T8 Torx interface. This configuration provides secure clamping with consistent torque transfer, which improves repeatability of the cutting edge position and reduces vibration during boring passes. For production environments where tolerance and surface finish matter, the result is fewer reworked parts and steadier cycle times. Simple handling that saves workshop time The cartridge’s straightforward design focuses on fast insert changes and uncomplicated maintenance. The Torx screw arrangement is compatible with common torque tools, allowing rapid exchange of inserts without specialised equipment. Fewer, faster tool changes translate into shorter machine downtime and higher effective machining time per shift, which is particularly valuable for small serial runs or mixed-batch production where agility matters. Designed for integration into standard boring systems Engineered for use within established boring-tool sets, this component fits into conventional toolholders and supports a range of internal machining tasks. The compact construction contributes to good accessibility inside bores while maintaining the rigidity required for stable cuts. For engineers and workshop managers, the benefit is a predictable upgrade path: the cartridge brings standardisation and robustness without complex retrofitting. For procurement or to verify fitment in a specific boring setup, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to source the Teknik Makina Cartridge THB03TM and confirm suitability for the intended application. Technical Data Article number: THB03TM Manufacturer: Teknik Makina Designation: Cartridge 09–18mm for Boring Tool eClass: 21041590 Numbers / Core Technical Data Diameter range: 09–18 mm Screw size: M2.5 x 4.7 Torx key size: T8 SKU: THB03TM Special features / Versions Compatible with CCMT 0602 indexable inserts Designed for boring-tool sets Secure clamping via Torx retaining screw Compact design for internal machining accessibility FAQ Which insert type fits the cartridge? The Cartridge THB03TM is designed for CCMT 0602 indexable inserts, enabling use of a common insert geometry for turning and boring tasks. What is the clamping method used? Clamping is achieved with an M2.5 x 4.7 Torx screw; the retaining interface corresponds to a T8 Torx key for tightening and removal. What internal diameters does this cartridge cover? The cartridge covers internal boring diameters from 09–18 mm, making it suitable for a broad range of small to medium bores. Is the cartridge suitable for heavy-duty machining? The cartridge is intended for standard boring-tool systems; its secure screw clamping supports stable performance, while final suitability depends on cutting parameters and machine rigidity. Can this cartridge be used with other insert manufacturers? Yes — any insert manufactured to the CCMT 0602 standard should be compatible, subject to the insert thickness and cutting geometry matching the toolholder setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the set's combination of solid carbide construction, internal coolant and left-hand cutting geometry for consistent chip evacuation and extended tool life; order or consult through Metav Werkzeuge for selection and delivery. Boring bar SCLCL with Coolant IPS31TM — Teknik Cutting Tools, solid carbide set with internal coolant and left-hand geometry A Boring bar SCLCL with Coolant designed for precision turning operations where left-hand cutting and reliable internal coolant supply improve chip control and surface finish. Solid carbide construction Integrated internal coolant supply Left-hand cutting geometry Set 10–16 mm, 3 pieces Faster, more reliable left-hand machining for turning applications The combination of solid carbide construction and a dedicated internal coolant channel delivers measurable gains in process stability for left-hand turning tasks. By supplying coolant directly to the cutting edge the tool reduces heat at the cutting zone, which improves tool life and helps maintain consistent tolerances over longer runs. For shops that include left-handed turning operations in serial production, this configuration reduces rework and minimises unscheduled tool changes. The IPS31TM set supports efficient chip evacuation and a cleaner work area, contributing to steadier cycle times and improved first-pass yield. Precision, versatility and reduced setup time for mixed batches Supplied as a 10–16 mm set of three items, the kit covers common boring diameters without repeated holder changes. Compatibility with CC-- 0602 indexable inserts simplifies inventory management and allows rapid replacement of cutting edges, which shortens downtime during batch changes. The bar geometry and clamping design are geared towards maintaining concentricity and radial stability, so the achievable surface finish and dimensional repeatability are improved compared with conventional holders. This versatility is particularly useful for workshops processing a mix of small to medium diameters where rapid throughput and minimal set-up effort are priorities. Serviceability, lightweight handling and trusted supply chain Maintenance and quick adjustments are facilitated by standard fastenings, including the T8 Torx key and M2.5 x 5.5 fixing screw, enabling replaceable components to be serviced with common tools. At 0.35 kg per set, the lightweight design eases manual handling during tool changes while retaining rigidity where it matters. Backing from Teknik Cutting Tools and distribution via Metav Werkzeuge ensures a reliable supply chain and the kind of product oversight that benefits precision workshops; consistent quality control and European distribution reduce lead times and logistical uncertainty. Contact Metav Werkzeuge for tailored technical advice and secure the Teknik Cutting Tools boring bar set with internal coolant (IPS31TM) for improved cycle stability and tool life Technical Data Article number: IPS31TM Manufacturer: Teknik Makina Material: Solid carbide Internal coolant: Yes Cutting direction: Left Set: 10–16 mm, 3 pieces Included: E08K SCLCL 06, E10K SCLCL 06, E12M SCLCL 06 Compatible inserts: CC-- 0602 Weight: 0.35 kg Facts Weight: 0.35 kg Diameter range: 10–16 mm Pieces per set: 3 Torx key: T8 Torx screw: M2.5 x 5.5 Special features Solid carbide construction Integrated internal coolant channel Left-hand cutting geometry Compatible with CC-- 0602 inserts Supplied as a set of three elements Brand: Teknik Cutting Tools FAQ What materials can this boring bar handle? The boring bar SCLCL with Coolant (IPS31TM) is made of solid carbide and is suitable for standard turning materials; consult Metav Werkzeuge for specific material guidance. Which inserts are compatible with the set? The IPS31TM set accepts CC-- 0602 indexable inserts, enabling quick edge changes and broad application flexibility. How does internal coolant benefit the machining process? Internal coolant in the boring bar SCLCL with Coolant (IPS31TM) delivers coolant directly to the cutting edge, improving chip evacuation and extending insert life. Is the set suitable for left-hand turning centres? Yes, the tool's left-hand cutting geometry is optimised for left-hand turning operations and similar machining setups. What is included in the delivery of this set? Delivery of the IPS31TM set includes three elements (E08K SCLCL 06, E10K SCLCL 06 and E12M SCLCL 06) as listed in the product data. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, workshop-ready solution that pairs adaptable toolholders with an internal coolant option and secure Torx clamping for consistent chip control and repeatable set-up; order or request technical advice via Metav Werkzeuge for a dependable supply from Emmerich. Boring bar set IPS04TM by Teknik Makina — internal coolant, left-hand cutting A Boring bar set IPS04TM engineered for precise internal turning and adaptable coolant-assisted machining across standard workshop and CNC applications. Internal coolant option available Compatible with CC--0602 and CC--09T3 Left-hand cutting for specific operations Includes Torx keys and mounting screws Reliable chip control and stable cutting performance The set is designed to support consistent material removal with improved chip evacuation thanks to the internal coolant capability and a holder geometry optimised for rigidity. Compatibility with indexable inserts (types CC--0602 and CC--09T3) allows flexible selection of grades for finishing or medium cutting tasks, reducing tool-change complexity. As a result, cycle times can be stabilised and surface finish consistency improved, which benefits production planning and quality control. Secure clamping and straightforward maintenance Each toolholder follows the SCLCL-style configuration and is supplied with the required fastenings, including Torx keys (T8, T15) and screws M2.5x5.5 and *M3.5x8.5, to ensure repeatable seating of composite heads and inserts. The compact overall mass (0.464 kg) makes handling and quick set-up easier on the machine turret or toolpost. Clear mechanical attachment and standardised fasteners minimise downtime during insert changes and maintenance, supporting continuous productivity. Adaptable for workshop and CNC toolrooms Left-hand cutting orientation delivers process flexibility where counter-direction operations are required, while the modular holder types listed in the set enable a broad spread of bore diameters and approaches. The configuration suits technicians who prioritise adaptability and stable clamping over single-purpose tooling, and the option to work with coolant-through operation supports better temperature control at the cutting zone for prolonged insert life. Contact Metav Werkzeuge for tailored technical advice and to secure the Teknik Makina IPS04TM boring bar set with internal coolant; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for prompt assistance from Emmerich. Technical data Article number: IPS04TM GTIN: 4061905100024 Manufacturer: Teknik Makina Facts Weight: 0.464 kg Diameter range: 10–20 mm Pieces per set: 4 Special features Contents: A08H SCLCL 06, A10J SCLCL 06, A12K SCLCL 06 and A16M SCLCL 09 Internal coolant: yes Cutting direction: left Compatible inserts: CC-- 0602, CC-- 09T3 Torx keys: T8 and T15 Torx screws: M2.5x5.5 and M3.5x8.5 FAQ Which inserts are compatible with this set? The set is compatible with CC--0602 and CC--09T3 indexable inserts; choose the insert grade to match the workpiece material and desired surface finish for the IPS04TM boring bar set. Is coolant-through capability included? The IPS04TM configuration offers internal coolant to support improved chip evacuation and temperature control during bore machining when coolant-through supply is used. What toolholders are supplied in the set? The set contains the following holders: A08H SCLCL 06, A10J SCLCL 06, A12K SCLCL 06 and A16M SCLCL 09, enabling a range of internal turning applications. Are the required Torx keys and screws provided? Yes — Torx keys T8 and T15 are supplied for mounting and adjustment, together with screws M2.5x5.5 and M3.5x8.5 for secure clamping of insert heads. What is the SKU and where is it sourced from? The SKU is IPS04TM; the tooling is offered by Teknik Makina and available through Metav Werkzeuge for European distribution. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact set that covers a 10–20 mm diameter range, offers the choice of internal coolant, and accepts common indexable inserts for fast set‑ups and predictable results; order the set directly via Metav Werkzeuge or request advice from our consultants for application-specific recommendations. Boring Bar Set IPS20TM — right‑hand holders with optional internal coolant (Teknik Makina) The Boring Bar Set IPS20TM is a compact collection of right‑hand toolholders designed for turning and finishing operations on lathes, offering compatibility with common indexable carbide inserts and the option of internal coolant for improved chip control and tool life Covers diameters 10–20 mm Optional internal coolant supply Compatible with CC-- 0602 and 09T3 inserts Includes Torx keys T8 and T15 Faster changeovers and reliable chip control for turning operations The four‑piece collection supplies a consistent set of right‑hand toolholders that are sized to cover a diameter range of 10–20 mm, simplifying tool selection at the machine. Because the holders accept standard indexable inserts (CC-- 0602 and CC-- 09T3), tool changes are rapid and repeatable, which reduces spindle downtime and increases productive cutting time. Clear interface geometry and standard screw fittings mean insert seating is consistent, yielding repeatable part quality across batches. Coolant option and secure clamping for consistent surface finish Where internal coolant is required, the option with or without coolant improves chip evacuation and can extend insert life when machining prone materials. The clamping system is secured with supplied fasteners, and Torx keys T8 and T15 are provided to ensure correct torque during insert changes and maintenance. This combination of coolant routing and robust clamping promotes stable cutting, reduces rework, and helps achieve a predictable surface finish during routine and finishing passes. Practical contents and workshop ergonomics for everyday use The set is supplied as four holders (S08H SCLCR 06; S10J SCLCR 06; S12K SCLCR 06; S16M SCLCR 09) and is compact enough for efficient handling, with a total weight of approximately 0.96 kg. Right‑hand cutting orientation is specified for standard turning directions and the toolholders suit a wide range of workshop tasks from roughing to light finishing. Sourced from Teknik Makina, the package is intended to be a straightforward, reliable choice for workshops seeking standardised tooling that integrates with existing insert stocks and clamping routines. For tailored advice or to specify the Teknik Makina IPS20TM set with the internal‑coolant option, contact Metav Werkzeuge for direct ordering and application guidance from our Emmerich hub Technical data Article number: IPS20TM Manufacturer: Teknik Makina SKU: IPS20TM Facts Weight: 0.96 kg Diameter range: 10–20 mm Pieces per set: 4 ECLASS: 21189217 Special features Right‑hand cutting direction Option: with or without coolant Compatible inserts: CC-- 0602; CC-- 09T3 Contents: S08H SCLCR 06; S10J SCLCR 06; S12K SCLCR 06; S16M SCLCR 09 Torx keys: T8 and T15 Torx screws: M2.5x5.5 and M3.5x8.5 FAQ What insert types are suitable for the set? The set accepts the specified CC-- 0602 and CC-- 09T3 indexable inserts; these sizes provide a balance between edge strength and profile control for common turning tasks. Is an internal coolant option included? The holders are offered with or without internal coolant; the IPS20TM configuration can be chosen to match the machine’s coolant capability and the workpiece material’s chip‑control needs. How many holders are included and what sizes are they? The set contains four holders: S08H SCLCR 06, S10J SCLCR 06, S12K SCLCR 06 and S16M SCLCR 09, covering the 10–20 mm diameter range for typical lathe operations. Are the necessary clamping screws and keys supplied? Yes, the set includes the Torx keys T8 and T15 and the matching screws (M2.5x5.5 and M3.5x8.5) to ensure correct and repeatable clamping of inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The compact combination of a 4.7 mm pivot and 10.5 mm overall length ensures precise motion control in tight assemblies, while a 0.1 kg mass keeps handling and replacement straightforward. Benefit from a small, reliable toggle component designed for fixture use; order directly via Metav Werkzeuge or consult the technical team for application advice. Knee lever (Kniehebel) — Toggle lever with 4.7 mm pivot, 10.5 mm length by Teknik Makina The knee lever (Kniehebel) serves as a compact toggle component for clamping and actuation tasks in jigs, fixtures and mechanical linkages, offering a small footprint and defined pivot geometry for repeatable movement. Compact overall length 10.5 mm Precision pivot diameter 4.7 mm Lightweight construction, 0.1 kg Suitable for clamping and fixturing assemblies Space-saving design that reduces assembly complexity The small footprint of this toggle lever supports installation where room is limited. With an overall length of 10.5 mm and a pivot diameter of 4.7 mm, the component is intended for compact mechanical linkages and small-scale fixture elements. These dimensional values enable precise placement in confined assemblies, reducing the need for additional adaptors or extended linkages and therefore simplifying the overall assembly process. Fewer interface elements typically translate into lower cumulative tolerances and a more predictable motion response. Precise pivot geometry for consistent actuation A defined pivot diameter is a decisive factor in repeatable motion. The 4.7 mm pivot provides a clearly specified bearing surface that supports consistent kinematics in toggle and clamping sequences. In practical terms, this means improved positional repeatability and reduced play at the joint compared with unspecified or loosely dimensioned pivots. The modest mass (0.1 kg) contributes to controlled inertia during rapid cycles, helping to preserve alignment and reduce dynamic disturbance in small mechanisms. Integration and traceability for workshop and production environments Marked with SKU TL4ATM and produced by Teknik Makina, the lever is suitable for systematic stock-keeping and quick replacement workflows. The compact part size supports straightforward storage and logistic handling. Clear dimensional data (pivot Ø 4.7 mm, length 10.5 mm, weight 0.1 kg) enables rapid compatibility checks during design reviews and maintenance planning. Where repeatable clamping or actuation is required, specifying components with known measurements reduces downtime and simplifies spare-part management. For robust, space-conscious clamping choose the Teknik Makina TL4ATM knee lever — contact Metav Werkzeuge in Emmerich for product availability and engineering advice: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: TL4ATM Manufacturer: Teknik Makina Weight: 0.1 kg Diameter: 4.7 mm Overall length: 10.5 mm Facts Pivot diameter: 4.7 mm Overall length: 10.5 mm Mass: 0.1 kg SKU: TL4ATM Special features Name: Kniehebel Brand: Teknik Makina FAQ What is the pivot diameter of the knee lever? The pivot diameter is 4.7 mm for the Tekniк Makina knee lever (TL4ATM), providing a defined bearing surface for repeatable motion. Can this lever be used in compact jigs and fixtures? Yes, the overall length of 10.5 mm and low mass (0.1 kg) make the TL4ATM suitable for compact jigs and small fixture assemblies where space is constrained. How is the part identified for ordering and stock control? The component is listed under SKU TL4ATM and attributed to Teknik Makina, which helps with traceability and spare-part logistics. Does the specification include weight and dimensions for design validation? Yes, the available specifications are weight 0.1 kg, pivot diameter 4.7 mm and overall length 10.5 mm, which can be used for mechanical integration checks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, insert-compatible drilling solution that combines productive changeover, consistent hole quality and straightforward workshop stocking. With a 10.5 mm cutting diameter and compatibility with Korloy XCMT 050204 inserts, the tool supports efficient cycle times and repeatable results — order the indexable insert drill directly via Metav Werkzeuge or ask our consultants if needed. Indexable insert drill U14TM — Ø 10.5 mm, Korloy XCMT-compatible The indexable insert drill U14TM is a purpose-built drill body for CNC and manual drilling operations, engineered to accept Korloy XCMT 050204 inserts for reliable, repeatable hole production in general engineering environments Diameter 10.5 mm for precise holemaking Compatible with Korloy XCMT 050204 inserts 16 mm shank for secure clamping 90 mm overall length for deep reach Reduce cycle times with standard insert compatibility The U14TM is designed to speed up machining through rapid insert replacement and predictable chip control. With a 10.5 mm nominal diameter and acceptance of the widely used XCMT 050204 insert form, changeovers become a routine task rather than a production interruption. The use of recognised insert formats shortens setup time and simplifies inventory management, delivering a measurable improvement in throughput for small-batch and repeat production alike. Stable clamping and consistent bore quality A robust 16 mm shank and a 45 mm effective shank length combine to provide secure clamping and low runout, which helps maintain concentricity and dimensional accuracy. The 31 mm cutting length balances material engagement with chip evacuation to reduce vibration and improve surface finish. These dimensional choices make the tool a dependable option when consistent hole tolerances and reproducible finishes are required across multiple components. Practical workshop advantages and stock efficiency The compact 90 mm overall length and light construction support flexible fixturing and easier tool handling at the bench or on the machine. Compatibility with Korloy inserts reduces the number of different spare parts carried in stock while preserving cutting performance through reliable insert geometry. For workshops seeking pragmatic solutions, the drill body delivers straightforward maintenance, rapid insert swaps and predictable life cycles — advantages that translate into less downtime and lower indirect costs. For precision drilling backed by Teknik Cutting Tools' engineering and stock handled by Metav Werkzeuge, request availability or tailored advice from Metav Werkzeuge in Emmerich to ensure the U14TM matches specific machine and application requirements Technical data SKU: U14TM Manufacturer: Teknik Makina Designation: Indexable insert drill body Numbers / Core technical data Diameter: 10.5 mm Cutting length: 31 mm Shank diameter: 16 mm Shank length: 45 mm Overall length: 90 mm Weight: 0.111 kg Special features Compatible insert: XCMT 050204 Compatible insert manufacturer: Korloy Designed for indexable insert drilling FAQ What insert does the drill accept? The drill accepts XCMT 050204 indexable inserts; the U14TM is configured for this common insert size. What is the shank diameter and how is it clamped? The U14TM has a 16 mm shank, intended for secure clamping in appropriate toolholders and collets to minimise runout. What hole depth can be reached with this tool? With an overall length of 90 mm and a cutting length of 31 mm, the tool is suitable for moderate-depth drilling within the stated dimensions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable solution for precise steel machining: the combination of a Ø10.5 mm cutting diameter, a 31 mm cutting length and a rigid 16 mm shank ensures stable performance and reduced tool-change time; order this tool directly via Metav Werkzeuge or request advice from the Metav consultants. Indexable-insert drill body U32TM (Ø10.5 mm, compatible with Taegutec inserts) by Teknik Makina A Indexable-insert drill body designed for reliable removal of material in steel applications, offering a compact overall length of 90 mm and straightforward integration into standard toolholders. Compatible with Taegutec XCGT 050204 Ø10.5 mm cutting diameter 31 mm cutting length for deep holes 16 mm shank with 45 mm clamping length Consistent hole quality for production environments The drill body delivers consistent hole quality by combining a defined cutting zone with a stable shank geometry. The specified Ø10.5 mm diameter and 31 mm cutting length are selected to give predictable chip evacuation and reduced run-out in high-volume operations. As an indexable-insert system, the cutting edges are replaced rather than the entire tool, which keeps downtime low and maintains repeatability across batches. Overall rigidity and a compact footprint reduce vibration, so that tolerance retention is supported across repetitive cycles. Simple integration and cost-effective wear management Compatibility with Taegutec XCGT 050204 inserts means the tool is supplied to fit an established insert family, simplifying procurement and stocking. The use of replaceable inserts turns cutting-edge wear into a short service step rather than a full tool change, delivering measurable cost-efficiency over the life of the tool. For workshops evaluating tooling strategies, this indexable approach reduces total tooling spend while preserving cutting performance and surface finish standards expected in industrial steelwork. Secure clamping and practical handling on the shop floor A 16 mm shank diameter with 45 mm clamping length provides secure fixation in standard toolholders, improving concentricity and enabling safer spindle speeds within the machine’s recommended limits. The assembly weight of 0.114 kg contributes to easy handling during set-up and minimises added spindle load. Designed with robust construction for steel machining, the tool body supports stable chip formation and consistent cutting conditions, which in turn aids downstream processes by reducing rework needs and supporting production throughput. For ordering or technical clarification, contact Metav Werkzeuge GmbH: info@metav-werkzeuge.com or +49 2822 7131930 and request the Teknik Makina indexable-insert drill body (U32TM) for efficient steel machining. Technical data Article number: U32TM Manufacturer: Teknik Makina Product: Indexable-insert drill body Data Diameter: 10.5 mm Overall length: 90 mm Cutting length: 31 mm Shank diameter: 16 mm Clamping length: 45 mm Weight: 0.114 kg Special features Compatible with Taegutec XCGT 050204 inserts Suitable for steel machining (shop description) Indexable-insert design for reduced tool replacement FAQ Which inserts fit this drill body? The drill body accepts Taegutec XCGT 050204 inserts; this compatibility is specified to ensure standardised insert stocking and simple replacement. What is the effective cutting length? The effective cutting length is 31 mm, giving sufficient engagement for many through and partial-depth hole operations. Which shank size is required for clamping? Clamping is designed around a 16 mm shank diameter with a 45 mm clamping length for secure fixation in compatible toolholders. Is this tool suitable for machining steel? Yes, the tool body is intended for steel machining, with geometry and construction aimed at stable cutting and reliable chip control. What is the article number for ordering and reference? Order or reference the tool by article number U32TM, Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, M6-threaded fastening solution with reliable fit and straightforward assembly; the combination of precise dimensions and Allen-key compatibility supports efficient workshop processes. Order the Screw for Shim directly via Metav Werkzeuge or consult the technical team for clarification. Screw for Shim – M6 thread, 12 mm overall length, Teknik Makina A Screw for Shim engineered for secure attachment of U-plates and shims in machine assemblies and workshop fixtures. M6 metric thread for standard fastening 12 mm overall length for compact assemblies 10.6 mm diameter for a precise fit Compatible with 4 mm Allen key Reliable fastenings where space is limited The fastening element is provided with an M6 metric thread and a 12 mm overall length, making it suitable for applications that require a compact, repeatable connection. The reduced length supports installations in confined assemblies while the standard thread size ensures compatibility with commonly used threaded holes and inserts. With a nominal head diameter of 10.6 mm, the component offers a precision fit that reduces play and minimises the need for rework during assembly. The design focuses on operational efficiency and predictable mechanical behaviour under normal workshop conditions. Efficient handling and straightforward assembly Assembly is simplified by the requirement for a 4 mm Allen key, a common tool in industrial and maintenance settings. This compatibility shortens assembly time and reduces tool variance across production lines. The fastener’s configuration supports quick engagement with U-plate and shim interfaces, promoting consistent clamping force and ease of replacement when adjustments are necessary. The clear specification of drive interface and thread geometry aids inventory management and streamlines procurement for purchasing teams seeking dependable, standardised components. Suitable for workshop and fixture applications Intended for use in fixture construction and equipment maintenance, this fastening part is optimised for repeatable installation cycles and mechanical stability in smaller-scale assemblies. The compact geometry helps to maintain clearance around moving parts while providing secure retention for shims and U-plates in positional applications. Specified dimensions and drive type enable predictable interchangeability with other M6 fasteners used across the workshop, supporting a reduction in variant stock and simplifying repair procedures. The product is supplied by Teknik Makina and aligns with standardised workshop practices. For reliable M6 fastening from Teknik Makina, request availability or place an order through Metav Werkzeuge — contact the Metav technical team for product matching and delivery from Emmerich. Technical data Article number: TC039TM Manufacturer: Teknik Makina EClass: 21189290 SKU: TC039TM Dimensions & core data Thread: M6 Diameter: 10.6 mm Overall length: 12 mm Weight: 0.1 kg Special features & compatibility For shim / for U-plate Compatible with 4 mm Allen key Suitable for standard M6 threaded holes FAQ What thread specification does this fastener use? The fastener uses an M6 metric thread; the Screw for Shim (Teknik Makina, SKU TC039TM) is specified for standard M6 applications. What are the key dimensions of the part? Key dimensions are a 10.6 mm diameter and 12 mm overall length; the listed weight is 0.1 kg for the item as supplied. Which tool is required for installation? Installation requires a 4 mm Allen key, which matches the internal hex drive specified for the component. Is this component intended for U-plates and shims? Yes; the item is described for use for shim / for U-plate, offering a compact fastening solution for those applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of compatibility, precise geometry and straightforward mounting: the corner tool head is optimised for R390‑1704 indexable inserts, has a 32 mm shank for secure clamping and a 90° cutting angle for consistent entry geometry — order via Metav Werkzeuge or consult our specialists for tailored integration into existing tool turrets. Corner tool head T412TM — for R390‑1704 indexable inserts by Teknik Makina Corner tool head T412TM designed as a heavy‑duty holder for R390‑1704 indexable inserts, suited to turning and facing operations where a 90° cutting geometry and reliable repeatability are required Compatible with Sandvik R390‑1704 inserts 32 mm shank diameter for secure clamping 90° cutting angle for consistent entry geometry Torx M3.5×8.5 screw with T15 key Stable, predictable cutting performance for indexable inserts The T412TM tool head is engineered to deliver consistent cutting geometry, making it easy to predict chip flow and surface finish when used with standard R390‑1704 indexable inserts. The 90° cutting angle provides a neutral engagement that simplifies process planning and reduces the need for angle compensation in CAM programs. With a 32 mm shank and a head diameter of 100 mm, the component provides the rigidity expected in high‑torque operations; this rigidity translates directly into stable cutting conditions and extended insert life. These characteristics make the holder suitable for mixed production runs where reproducibility and quick insert changes are priorities. Quick set‑up, secure fastening and efficient workshop handling Time in set‑up is reduced by a straightforward clamping and fastening concept: the head secures inserts with a Torx M3.5×8.5 screw operated by a T15 key, enabling repeatable torque application and predictable clamp force. The component’s overall length of 52 mm and a mass of 1.665 kg balance accessibility at the turret with sufficient mass to dampen vibration on heavier cuts. The combination of a wide shank and standardised Torx fastening supports fast tool exchanges and routine maintenance, which in turn increases machine uptime and simplifies tool inventory control in the workshop. Compatibility and practical benefits for production workflows Designed to accept Sandvik‑style R390‑1704 inserts, this holder integrates into established tooling systems without the need for bespoke adaptors. The eight cutting faces indicated for the head allow flexible indexing strategies when matched with multi‑edge inserts, helping to reduce downtime between edge changes. The T412TM supports common workshop practices such as pre‑setting and offline inspection, while its standardised dimensions make it straightforward to document in tooling lists and CAM setups. For purchasers looking to reduce supplier complexity, the holder’s compatibility with widely used indexable inserts makes inventory management more predictable and cost‑effective. Contact Metav Werkzeuge for detailed integration advice on Teknik Makina’s Corner tool head T412TM and to arrange prompt supply from our Emmerich warehouse Technical data Article number: T412TM Manufacturer: Teknik Makina Product: Corner tool head for R390‑1704 indexable inserts SKU: T412TM Compatible insert type: R390‑1704 (Sandvik) Fastening: Torx M3.5×8.5 screw, T15 key Core specifications Shank diameter: 32 mm Head diameter: 100 mm Cutting edges: 8 Cutting angle: 90° Total length: 52 mm Weight: 1.665 kg Special features Compatible with Sandvik R390‑1704 indexable inserts Standard Torx fastening for repeatable clamp torque Designed for turning/facing operations requiring 90° geometry Robust construction for reduced vibration and stable cutting FAQ Is this tool head compatible with Sandvik R390‑1704 inserts? Yes. The corner tool head accepts R390‑1704 indexable inserts and is specified for compatibility with Sandvik insert geometries. What shank size is required for mounting the holder? The holder uses a 32 mm shank for clamping; this dimension should be matched to the turret or toolpost receptacle. Which screw and key are needed to secure the insert? Inserts are secured with a Torx M3.5×8.5 screw; a T15 key is used for installation and removal. What are the physical dimensions and weight of the tool head? The tool head has a 100 mm head diameter, total length 52 mm and a weight of 1.665 kg, offering a stable mass for most turning operations. Can the tool head be used for facing and profiling? Yes. With its 90° cutting angle and compatibility with multi‑edge inserts, the holder is suitable for facing and profile turning where a square‑entry geometry is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a secure clamping interface, compact geometry and a defined 90° cutting angle delivers reliable repeatability for turning operations; benefit from precise positioning and straightforward maintenance. Order the clamping holder directly via Metav Werkzeuge or consult the specialists for application advice. Clamping holder L100 mm (D220-2TM) — Right-hand cut, 90° cutting angle (Teknik Makina) The Clamping holder L100 mm (D220-2TM) is a compact tool holder engineered for secure clamping in conventional turning tasks, offering a right-hand cut and a defined 90° approach angle for repeatable results. *100 mm overall length *20 mm cutting height *Right-hand cut, 90° angle *Torx T8 screw, M2.5×5.5 Precision and consistent tool engagement for turning workflows The holder is designed to provide stable engagement during turning thanks to its compact 100 mm body and rigid geometry. The 20 mm cutting height and a 90° cutting angle ensure predictable tool position relative to the workpiece, reducing setup iterations and improving process repeatability. Lightweight at 0.186 kg, the unit minimises additional overhang while still delivering the necessary stiffness for controlled machining. These measurable parameters translate into lower scrap rates and shorter cycle verification times on the shop floor. Practical fastening and service-friendly design Fastening is standardised to a Torx T8 interface with an M2.5×5.5 screw, enabling quick clamp changes and secure retention of the assembly. The ISO designation 1212 identifies the holder’s configuration for compatibility checks in tooling systems and documentation. The accessible screw interface and clear specification simplify spare‑part management and routine checks, helping to maintain uptime without specialised fixtures. Routine maintenance is limited to periodic torque checks and inspection of the clamping face to sustain consistent tool seating. Application scope and workshop advantages Suited to conventional turning applications, the holder’s dimensions — 12 mm shank width and a 16 mm cutting head width — support compact set-ups and narrow toolpost arrangements. The right-hand cutting orientation makes it appropriate for typical external turning operations where a secure, predictable cut direction is required. Implementing this holder supports a pragmatic workflow: straightforward mounting, clear replacement criteria and compatibility with existing tool inventories, which contributes to a more efficient tooling strategy and reduced procurement complexity. Contact Metav Werkzeuge for tailored application advice and stock availability of the Teknik Makina clamping holder D220-2TM; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: D220-2TM Label: Klemmhalter L100mm Product type: Clamping holder ECLASS: 21181004 Manufacturer: Teknik Makina Facts Overall length: 100 mm Weight: 0.186 kg Width: 12 mm Height: 20 mm Cutting head width: 16 mm Cutting height: 20 mm Cutting angle: 90° Cutting direction: right SKU: D220-2TM Special features ISO designation: 1212 Torx key: T8 Torx screw: M2.5×5.5 Label: Klemmhalter L100mm FAQ What is the cutting direction of this holder? The clamping holder L100 mm (D220-2TM) is configured for a right-hand cutting direction and a 90° approach angle. Which fastening hardware is required for assembly? Assembly uses a Torx T8 interface and an M2.5×5.5 Torx screw as supplied for secure clamping. What are the principal dimensions to check for toolpost fitment? Key dimensions include an overall length of 100 mm, a shank width of 12 mm and a cutting height of 20 mm for compatibility checks. Is there an ISO or designation to reference in procurement? Yes — the holder carries the ISO designation 1212, useful for ordering and documentation. For which turning tasks is this holder best suited? The holder is suited to standard external turning operations requiring a fixed 90° cutting angle and right-hand cutting orientation; its compact form supports tight toolpost arrangements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from secure clamping, a compact 16 x 16 mm shank and 100 mm overall length for extended reach; the combination improves tool accessibility and repeatable insert retention. Order the clamp holder directly via Metav Werkzeuge or contact their consultants for specification advice. Klemmhalter VER16 L100mm — 100 mm clamp holder for VER16 indexable inserts by Teknik Makina A Klemmhalter VER16 L100mm engineered as a rigid clamp holder for VER16 indexable inserts, suitable for turning operations where precise insert location and a 100 mm reach are required Clamp holder »VER16 L100« for VER16 inserts Shank 16 x 16 mm for standard toolposts 100 mm overall length for extended reach Torx T15 screw, M3.5×8.5 fastening system Consistent clamp retention for reliable machining results The clamp design delivers predictable and repeatable clamping force, ensuring insert positioning remains stable cycle after cycle. With a defined shank size of 16 x 16 mm and an ISO designation of 1616, the holder integrates with common toolposts and fixtures and reduces set-up variation. The fastening arrangement using a Torx T15 drive and M3.5×8.5 screw provides controlled torque application, which improves repeatability and minimises the risk of insert movement under cutting loads. Engineers and workshop managers will appreciate the clear dimensional data that enables process planning and fixture checks without ambiguity. Compact length and geometry that improve accessibility in tight setups An overall length of 100 mm offers extended reach while keeping overhang manageable for stable turning operations. The reduced overhang lowers bending moment compared with longer holders, which helps maintain surface finish and dimensional accuracy on the workpiece. The cutting-head width of 18 mm and a cutting height of 30 mm are suitable for typical VER16 insert geometries, allowing compatibility with a wide range of indexable grades. This geometry supports efficient toolpaths and can shorten cycle times by allowing closer approach to work features that would otherwise require additional tool changes. Easy maintenance and efficient workshop operation The clamp holder is lightweight at approximately 0.185 kg, which contributes to lower dynamic loads when rotating assemblies are involved and simplifies manual handling during tool changes. The straightforward screw fixation speeds up insert replacement and inspection routines, reducing machine downtime. Supplied as a compact, ready-to-install holder, it supports lean shop workflows and predictable spare-part management. For operations seeking reproducible results and straightforward maintenance, the combination of precise dimensions and standardised fastening ensures the holder performs as part of a consistent tooling strategy. Contact Metav Werkzeuge to discuss Teknik Makina clamp holder options and to confirm compatibility with specific machining set-ups; Metav's team in Emmerich can advise on delivery and technical details. Technical Data Article number: D524TM Manufacturer: Teknik Makina Product type: Clamp holder Facts Overall length: 100 mm Shank width: 16 mm Shank height: 16 mm Cutting head width: 18 mm Cutting height: 30 mm Weight: 0.185 kg ISO designation: 1616 Special features Compatible with VER16 indexable inserts Torx T15 drive for screw tightening Fastening screw: M3.5×8.5 SKU: D524TM FAQ Which inserts are compatible with this holder? The holder is designed for VER16 indexable inserts; the geometry and clamping arrangement suit standard VER16 insert profiles. What are the principal dimensions to check for fixture compatibility? Key dimensions are 16 x 16 mm shank, 100 mm overall length, 18 mm cutting-head width and 30 mm cutting height. Which screw and drive type are required for clamping? Clamping is secured with an M3.5×8.5 screw driven by a Torx T15 key to achieve consistent torque and repeatable clamping. Is the holder suited to standard toolposts and chip-to-chip tooling systems? The 16 x 16 mm shank and ISO 1616 designation make it compatible with many standard toolposts used in turning shops. What is the SKU for ordering and spare-part tracking? The SKU for this clamp holder is D524TM, useful for procurement and inventory control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, stiff clamping solution with a precise 93° cutting geometry and compatibility with VCMT 1103 inserts for reliable left-hand turning; order the component directly via Metav Werkzeuge or consult our specialists for application advice. Clamping Holder SVJC for VCMT Indexable Inserts — SVJCL 1616 by Teknik Cutting Tools The Clamping Holder SVJC is a left-hand toolholder designed for turning operations with VCMT 1103 indexable inserts, providing a compact 100 mm length for confined setups. Left-hand turning orientation Compatible with VCMT 1103 inserts 93° cutting geometry for radial cuts SVJCL 1616 profile, 100 mm overall length Increased process stability through geometry The holder's near-square 93° cutting geometry is engineered to deliver enhanced radial support and reduced deflection during facing and light turning operations. With a 25 mm cutting height and a reinforced cutting-head width of 20 mm, the unit increases stability at the insert interface, which translates into more consistent surface finishes and fewer rejects. The combination of compact form and measured stiffness is particularly suitable for short overhang applications in production or jobbing environments. Reduced setup time and predictable integration Featuring the standard SVJCL 1616 profile and a clear shank/bore designation (H11), the toolholder enables straightforward substitution into existing tool turrets and bar holders. The 100 mm overall length and modest mass (0.204 kg) support rapid tool changes and predictable vibration characteristics, helping to shorten machine downtime. Compatibility with VCMT 1103 inserts means established insert geometries and grades can be used immediately, avoiding lengthy requalification. Practical benefits for workshop workflows Supplied for left-hand cutting direction, the clamping unit simplifies tooling planning for specific turning strategies and complements a workshop stock focused on indexable inserts. The measured dimensions — 16 mm holder width, 16 mm holder height and 20 mm cutting-head width — combine to form a compact package that is easy to index and store while maintaining repeatable positioning. The toolholder is therefore well suited to small- to medium-scale manufacturers seeking consistent, low-complexity tooling solutions without sacrificing machining reliability. For reliable left-hand turning with VCMT inserts, contact Metav Werkzeuge for tailored supply and technical advice — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: D385TM SKU: D385TM ISO designation: SVJCL 1616 Facts Overall length: 100 mm Cutting height: 25 mm Cutting-head width: 20 mm Holder width: 16 mm Holder height: 16 mm Weight: 0.204 kg Cutting angle: 93° Cutting direction: left Compatibility & features Compatible inserts: VCMT 1103 Shank/bore designation: H11 Profile: SVJC for VCMT Brand: Teknik Cutting Tools FAQ Which inserts fit this toolholder? This clamping holder is designed for VCMT 1103 indexable inserts and accepts standard geometries for that insert family. Is the holder suitable for right-hand turning? The unit is specified for left-hand cutting direction; a right-hand version would be required for opposite feed directions. What is the ISO designation for ordering? Order using the ISO code SVJCL 1616 or the article number D385TM for exact matching. How does the 93° cutting angle affect machining? A 93° cutting geometry provides strong radial support for facing and light turning, improving stability and surface quality compared with more acute tool geometries. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precision compatibility, internal coolant performance and robust design to maintain steady production flows; order via Metav Werkzeuge or consult our specialists for application advice. Eckmesserkopf — Corner milling head, 100 mm diameter, internal coolant (Teknik Makina) Eckmesserkopf for XOMX 1204 indexable inserts, a compact corner milling head designed for precise shoulder work and reliable chip control in industrial turning and milling centres 100 mm diameter for stable cutting Internal coolant for improved chip evacuation Compatible with XOMX 1204 indexable inserts Robust build with 10 cutting edges for long runs Stable shoulder finishes through optimised geometry The head delivers consistent results because its 100 mm diameter and 90° cutting angle provide a defined cutting plane that reduces deflection during shoulder milling. With 10 cutting edges distributed for balanced engagement, cycle-to-cycle variation is reduced and surface quality is improved. The design converts insert geometry into predictable machining outcomes, which supports process planning and helps to meet tolerances with fewer reworks. The result is a measurable increase in first-pass yield for repeat operations. Lower process risk thanks to internal coolant and secure clamping Built-in internal coolant channels supply cutting fluid directly to the cutting zone, which reduces thermal load and supports stable chip breaking in continuous runs. This cooling strategy extends insert life and maintains cutting-edge integrity under demanding conditions. The head is secured with a T10 Torx drive and M3.5x8.5 screw, providing reliable clamping that minimises micro-movements and enables reproducible positioning after insert changes. Together, these features reduce unscheduled downtime and contribute to more predictable tool-change intervals. Easy integration with standard indexable systems and compact footprint Engineered for compatibility with XOMX 1204 indexable inserts and noted compatibility with SECO inserts, the component adapts to common tooling systems used in industry, simplifying stock management. The 32 mm mounting diameter and total length of 52 mm enable a compact toolset layout while preserving rigidity; the head’s mass of 1.817 kg contributes to stability under axial loads. These attributes allow integration into existing tooling assemblies without extensive modification, streamlining set-up and reducing fixture complexity. For reliable supply and tailored technical advice on the Teknik Cutting Tools corner milling head, contact Metav Werkzeuge to confirm compatibility and secure stock for upcoming production needs Technical data SKU: T518-1TM Product type: Eckmesserkopf Article name: Eckmesserkopf for XOMX 1204 Indexable Inserts Manufacturer: Teknik Makina Label: 100mm Eckmesserkopf XOMX 1204 L52mm mit Innenkühlung ECLASS: 21181015 Core specifications Diameter: 100 mm Mounting diameter: 32 mm Total length: 52 mm Weight: 1.817 kg Cutting edges: 10 Cutting angle: 90° Torx key: T10 Torx screw: M3,5x8,5 Aufnahme mm D: 32 Special features Internal coolant (yes) Fits inserts: XOMX 1204 Compatible insert manufacturer: SECO Indexable insert system Robust industrial design FAQ Which inserts fit this corner milling head? The corner milling head accepts XOMX 1204 indexable inserts and is noted as compatible with inserts from SECO, enabling use of established grades and geometries for various materials. Is the head suitable for continuous production runs? Yes — the combination of internal coolant and a robust clamping system with 10 cutting edges makes the head well suited to long, uninterrupted cycles and predictable tool life. How is coolant supplied to the cutting zone? Coolant is delivered through integrated internal channels, so the coolant reaches the insert rake face directly, supporting chip control and reduced cutting temperatures during operation. What mounting dimensions and weight should be considered for machine set-up? Take into account the 32 mm mounting diameter, 52 mm total length and mass of 1.817 kg when planning tool overhang and spindle loading to preserve rigidity and avoid unwanted vibration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise face machining with a 100 mm diameter, reliable internal coolant and a compact 52 mm overall length that together reduce cycle times and improve surface quality; order the tool via Metav Werkzeuge or contact our consultants for application advice. Indexable corner head — 100 mm, internal coolant, for ANKX 1706 (Teknik Makina) An Indexable corner head designed for use with ANKX 1706 indexable inserts, optimised for precision face turning and stable operation in production environments. 100 mm cutting head diameter Internal coolant supply Compatible with ISCAR ANKX 1706 inserts Robust 52 mm overall length Delivering consistent precision for face machining The compact cutting head delivers a 100 mm diameter reference surface that stabilises machining forces and contributes to consistent part geometry. Fitted with a 90° cutting angle and seven cutting positions, the design supports repeated index changes to maintain a uniform finish and minimise downtime. The combination of a short 52 mm overall length and solid mass reduces vibration, which improves surface finish and lowers scrap rates—advantages that translate directly into higher process efficiency and reduced rework. Cooling and serviceability for uninterrupted production An integrated internal coolant channel ensures effective heat removal at the cutting edge, extending insert life and preserving cutting-edge geometry during extended cuts. The head uses Torx screws (Torx key T20, screw M5x12) for secure clamping and straightforward replacement of the insert carrier; this reduces tool-change time and simplifies workshop logistics. With a machine-ready weight of 2.029 kg, the unit offers a balance between rigidity and manageable handling, supporting stable spindle loading without excessive inertia. Compatibility that simplifies tooling management Configured for ANKX 1706 indexable inserts and compatible with ISCAR standards, the head integrates smoothly into existing tool families and inventory systems. The modular approach reduces the need for special adapters and shortens setup, while the standardised fixing system promotes secure seating and repeatable positioning. The Teknik Makina unit (SKU T448-1TM) therefore supports streamlined tool planning and predictable cycle times in small-batch and serial production alike. For tailored application advice and rapid supply from Metav Werkzeuge in Emmerich, contact our specialists about the Teknik Makina Indexable corner head (SKU T448-1TM) with internal coolant. Technical data SKU: T448-1TM Product: Indexable corner head for ANKX 1706 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 100 mm Overall length: 52 mm Weight: 2.029 kg Cutting angle: 90° Cutting edges: 7 Features & compatibility Internal coolant: Yes Compatible insert: ANKX 1706 Compatible insert manufacturer: ISCAR Torx key: T20 Torx screw: M5x12 eClass: 21181015 Product type: Indexable corner head FAQ Which inserts does the head accept? The head accepts ANKX 1706 indexable inserts and is compatible with ISCAR-manufactured inserts specified for that geometry. How does the internal coolant improve performance? Internal coolant channels in the head deliver cooling directly to the cutting zone, which reduces thermal distortion and extends insert life for the Teknik Makina indexable head. What screw type secures the inserts and how are they serviced? Inserts are secured with Torx screws (M5x12) using a Torx T20 key for straightforward replacement and reliable clamping. Is the tool suitable for heavy interrupted cuts? The compact 52 mm overall length and substantial mass (2.029 kg) increase rigidity, making the head suitable for demanding face-turning applications where stability is required. What are the main dimensional specifications to check before ordering? Key dimensions are a 100 mm diameter and 52 mm overall length; additionally confirm compatibility with ANKX 1706 inserts and the ISCAR system. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the robust combination of large cutting diameter, integrated cooling and secure Torx fastening for steady, repetitive corner machining; order or request tailored advice from Metav Werkzeuge for reliable supply and fast delivery. Corner tool head T970TM — 100 mm with internal coolant (Teknik Makina) The Corner tool head for BOMT 1304 Indexable Inserts is a precision-cutting solution intended for corner and shoulder machining in CNC and turning operations, combining a large diameter with integrated coolant for consistent surface quality. 100 mm diameter head Integrated internal coolant supply Compatible with BOMT 1304 inserts Eight cutting edges, 90° cutting angle Maximise material removal with stable, large-diameter design The 100 mm diameter of this cutting head increases radial engagement and improves chip load distribution, which in turn raises productivity on repetitive shoulder and corner operations. With an overall length of L50 mm, the assembly balances accessibility and rigidity to reduce chatter. The presence of eight cutting edges means fewer index changes and longer intervals between maintenance, which lowers downtime and keeps cycle times stable. For machining centres and turret lathes requiring repeatable right‑angled faces, the geometry supports consistent results and reduced scrap rates. Repeatable setups through secure clamping and proven compatibility Secure fastening is achieved via a T10 Torx key and M3.5x8.5 Torx screws, providing a positive torque transfer and minimising insert movement during heavy intermittent cuts. The head is designed for BOMT 1304 indexable inserts and is listed as compatible with Ingersoll insert systems, which simplifies procurement and inventory for shops already standardised on those inserts. Clear, standardised hardware reduces setup uncertainty and supports reproducible tool offsets across multiple machines, improving first‑pass yield. Integrated cooling and mass for consistent surface finish An internal coolant channel is built into the head to deliver cutting fluid directly to the insert pocket, aiding chip evacuation and maintaining thermal stability at the cutting edge. This cooling reduces built-up edge and supports consistent finishes on machined shoulders. The unit mass of 1.542 kg contributes to cutting stability and dampens vibration, which helps produce sharp, square corners at a 90° cutting angle with reduced tool deflection. The design therefore supports both short production runs and longer batch processing with minimal compromise on surface integrity. Contact Metav Werkzeuge for a tailored supply proposal from Emmerich — Metav can advise on compatibility, delivery times and order processing to secure this Teknik Makina corner tool head (SKU T970TM) for production use — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical Data SKU: T970TM UID: T970TM ECLASS: 21181015 Product type: Corner tool head Label: 100mm Eckmesserkopf BOMT 1304 L50mm mit Innenkühlung Manufacturer: Teknik Makina Facts Diameter: 100 mm Overall length: 50 mm Weight: 1.542 kg Cutting edges: 8 Cutting angle: 90° Torx key: T10 Torx screw: M3.5x8.5 ECLASS code: 21181015 Special features Internal coolant For BOMT 1304 indexable inserts Compatible with Ingersoll inserts Category path: Zerspanen > Eckmesserkopf SKU/Label as above FAQ Is the head compatible with BOMT 1304 inserts? Yes. The corner tool head (Teknik Makina, SKU T970TM) is designed specifically for BOMT 1304 indexable inserts and mates with standard pocket dimensions for those inserts. Does the tool head provide internal coolant delivery? Yes. The T970TM includes an internal coolant channel to supply fluid directly to the insert pocket, improving chip control and tool life. How many usable cutting edges are available on the head? The head carries eight cutting edges, enabling multiple indexings before insert replacement is required, which extends productive tool life. What fastening hardware is required for assembly? Assembly uses a T10 Torx key and M3.5x8.5 Torx screws as specified for secure clamping of the inserts. What are the dimensional and mass specifications? The head measures 100 mm in diameter with an overall length of 50 mm and weighs 1.542 kg, offering a balance of reach and rigidity for corner machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid 100 mm cutting head with internal coolant and a precise 90° cutting angle to maintain stable cycle times and extend insert life; order the component directly via Metav Werkzeuge or consult our experts for application-specific advice. Corner turning head — 100 mm diameter, internal coolant (Teknik Makina) The Corner turning head for AP-- 1604 indexable inserts is designed for square-shoulder turning and external profiling on lathes, offering coolant-through capability for improved chip control and tool life. 100 mm diameter head Internal coolant supply 90° cutting angle for square shoulders Compatible with AP-- 1604 inserts (Korloy) Improve process stability with a rigid 100 mm design A larger tool head diameter increases stiffness and reduces deflection during heavy cuts, which leads to more consistent part tolerances and fewer reworks. The 100 mm dimension is engineered to stabilise cutting forces and to support repeatable programme times; this contributes to predictable throughput in production environments. By choosing a robust head, downtime from chatter-related quality issues is reduced and cycle reliability is enhanced. Coolant-through routing that extends insert life The built-in internal coolant channel delivers cutting fluid directly to the cutting edge, improving cooling and chip evacuation. This targeted supply reduces temperature peaks at the cutting edge, which slows wear and maintains edge geometry over longer tool life. For materials prone to thermal softening or difficult-to-manage chips, the coolant-through feature supports higher metal removal rates while protecting the insert grade and substrate. Purposeful geometry for accurate shoulder turning With a 90° cutting angle, the head is optimised for square-shoulder operations and facing tasks where perpendicular contact is required. The geometry enables clean transitions between faces and shoulders, reducing burr formation and minimising secondary finishing. The head accepts AP-- 1604 indexable inserts, a common insert family that balances economy and cutting performance for a wide range of steel and non-ferrous applications. Fewer tool variants through broad compatibility Compatibility with Korloy AP-- 1604 inserts and a standard fastening system simplifies inventory management. The head accommodates multiple cutting edges and is secured with an M4x10 Torx screw using a T15 key, making assembly and insert changes straightforward for trained shop staff. Consolidating holders around this interface helps reduce the number of different tool bodies required across turning applications. Practical dimensions and handling for workshop use The compact overall length of 52 mm and a mass of 1.532 kg make the head easy to mount while providing the mass necessary for damping vibrations. The unit features a multi-insert arrangement supporting up to 8 engagement positions, useful for operations requiring distributed cutting forces or sequential indexing. The design balances accessibility for maintenance with the rigidity demanded in production turning. For coolant-capable, square-shoulder turning choose the Teknik Makina T189-1TM corner turning head—contact Metav Werkzeuge in Emmerich for stock information and application guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T189-1TM UID: T189-1TM Manufacturer: Teknik Makina Core specifications Diameter: 100 mm Overall length: 52 mm Weight: 1.532 kg Number of cutting positions: 8 Cutting angle: 90° Torx screw: M4x10 Torx key: T15 Features & compatibility Internal coolant: yes Suitable for: AP-- 1604 indexable inserts Compatible insert manufacturer: Korloy Product type: Corner turning head FAQ Which insert type fits this head? The head is designed for AP-- 1604 indexable inserts and is compatible with Korloy grades suited to the application. Does the tool provide coolant-through capability? Yes, the T189-1TM corner turning head features internal coolant to improve cooling at the cutting edge and assist chip evacuation. What is the nominal diameter and overall length? The tool has a nominal diameter of 100 mm and an overall length of 52 mm, balancing rigidity and accessibility. How is the insert secured and which key is required? Inserts are fastened with an M4x10 Torx screw; a T15 key is required for tightening and loosening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust stability, internal coolant delivery and precise insert compatibility for shorter cycle times and longer tool life; order the component through Metav Werkzeuge or contact our consultants for application advice. Corner milling head by Teknik Makina — 100 mm, internal coolant The Corner milling head for APMT 11T3 indexable inserts is a compact, coolant-fed cutting head engineered for precision face and shoulder milling in production environments. 100 mm diameter, robust construction Internal coolant for stable chip evacuation 90° cutting angle for square shoulder milling Compatible with APMT 11T3 inserts (Korloy) Greater stability for higher material removal rates The large 100 mm body diameter and solid construction deliver enhanced rigidity that reduces chatter and improves surface finish in demanding operations. With an overall length of 63 mm, the head offers a compact overhang that permits higher feed rates while maintaining dimensional accuracy. The result is predictable process behaviour and longer insert life, which reduces unplanned tooling changes and supports continuous production. Coolant-fed cutter for controlled cutting temperatures Integrated internal coolant ensures direct lubrication and cooling at the cutting zone, which lowers thermal load on the insert and workpiece. This feature supports consistent cutting conditions, particularly when machining tougher alloys or when higher cutting speeds are required. By promoting efficient chip evacuation and heat dissipation, the coolant channel contributes to steady tool performance and reduced risk of thermal damage. Quick, secure insert clamping for minimal downtime Designed for APMT 11T3 indexable inserts, the head uses a Torx clamping system (key Torx T8) with screws M2.5x5.5 to secure each insert reliably. The straightforward clamping geometry enables fast index changes and repeatable seating, so setup times are shortened and assembly errors are minimised. Compatibility with Korloy inserts offers availability of proven grades and geometries for a range of materials. Right-angled cutting for precise shoulder and face work With a 90° cutting angle, the tool head excels at square shoulder milling and face operations where perpendicular contact and true shoulders are required. The configuration is suitable for mixed production workshops and small-series manufacturing where flexibility and repeatable accuracy are priorities. The head’s ten cutting positions support extended service intervals and cost-effective operation. For technical planning or to request application-specific recommendations for the Teknik Makina corner milling head (SKU T258-1TM), contact Metav Werkzeuge to discuss suitability, delivery or compatible insert grades via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: T258-1TM ECLASS: 21181015 Product type: Corner milling head Label: 100mm Eckmesserkopf APMT 11T3 L63mm mit Innenkühlung Facts Diameter: 100 mm Overall length: 63 mm Weight: 1.81 kg Cutting edges: 10 Cutting angle: 90° Special features Internal coolant Compatible with APMT 11T3 indexable inserts Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M2.5x5.5 Manufacturer: Teknik Makina FAQ What inserts fit this cutter head? The head accepts APMT 11T3 indexable inserts; Korloy grades are noted as compatible for a range of materials and cutting conditions. Does the head provide internal coolant? Yes, internal coolant is integrated to ensure direct delivery of lubricant and cooling to the cutting edge, improving stability and tool life for the corner milling head T258-1TM. What is the cutting geometry and where is it used? The tool features a 90° cutting angle, making it well suited for square shoulder and face milling operations in production and workshop environments. How are the inserts secured? Inserts are clamped with Torx T8 screws (size M2.5x5.5) for secure, repeatable seating and fast index changes. Is the component suitable for heavy-duty milling? The 100 mm diameter and robust design provide high rigidity; combined with internal coolant and multiple cutting edges, the head supports stable milling in many production tasks (material suitability should be checked against insert grade). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a rigid 32 mm shank, broad compatibility with LNHU 1306 indexable inserts and a true 90° cutting angle for stable, repeatable corner turning; order the tool directly via Metav Werkzeuge or request application advice from the consultants. Eckmesserkopf T583TM — Teknik Makina corner turning head, 32 mm shank, 90° cutting angle The Eckmesserkopf T583TM is a compact corner turning head designed for the use of LNHU 1306 indexable inserts and engineered for precise 90° shoulder and corner machining in turning centres and bar-fed lathes Stable 32 mm shank for secure clamping Compatible with LNHU 1306 indexable inserts 90° cutting angle for accurate corner machining M4x10 Torx fastening, key size T15 Precision and rigidity for consistent corner turning A firm mechanical basis reduces vibration and improves surface finish: the combination of a 32 mm shank and a head diameter of Ø 100 mm provides the necessary stiffness for machining shoulders and external corners. The holder accepts LNHU 1306 indexable inserts, which are widely used in industry; this standard compatibility simplifies tool procurement and reduces changeover complexity. With a nominal cutting angle of 90°, the head ensures true shoulder profiles and reliable dimensional control, while the unit mass of 1.795 kg gives an indication of its robust construction without excessive inertia. Fast changeover and secure clamping for productive cycles Reliable fastening contributes directly to uptime: the holder is secured with an M4x10 Torx screw tightened with a T15 key, offering a repeatable clamping method that minimises setup variables. The design provides 8 cutting edges in its indexable arrangement, enabling multiple index positions and extending effective tool life before regrinding or replacement is required. These engineering choices result in shorter tool-change intervals and fewer interruptions in the production sequence, which improves overall process efficiency and cost per part. Versatile integration into workshop setups and application support The tool is specified for use with inserts from leading manufacturers, notably Walter, which broadens material and grade choices for applications ranging from steel to alloyed materials. Its compact overall length of 50 mm makes the head suitable for turret and fixed-tool post installations where access and clearance matter. For assistance selecting grades, coatings or insert geometries for specific materials, technical consultation is available; Metav Werkzeuge combines wide product choice with practical advice from Emmerich, ensuring supply reliability and fit-for-purpose recommendations. For further technical data or application queries, contact info@metav-werkzeuge.com or call +49 2822 7131930. Discuss specific machining requirements with Metav Werkzeuge to confirm suitability of the Teknik Makina T583TM and to arrange supply and delivery from Emmerich Technical Data Article number: T583TM Manufacturer: Teknik Makina Designation: Eckmesserkopf for LNHU 1306 Indexable Inserts ECLASS: 21181015 Facts Shank diameter: 32 mm Weight: 1.795 kg Head diameter: 100 mm Cutting edges: 8 Overall length: 50 mm Cutting angle: 90° Special features Compatible inserts: LNHU 1306 Compatible insert manufacturer: Walter Torx screw specification: M4x10 Torx key size: T15 Application: corner and shoulder external turning FAQ Can the head be mounted in standard 32 mm turrets? The holder features a 32 mm shank and is intended for mounting in toolholders or turrets accepting a 32 mm diameter shank; check turret clamping specifications for exact fit. Which indexable inserts fit this holder? The head is designed for LNHU 1306 indexable inserts; insert geometry and grade selection should follow the intended material and cutting conditions. What fastening hardware is required for assembly? A Torx screw of specification M4x10 is used with a T15 Torx key for secure fastening of the insert seat. Is the holder suitable for shoulder turning and external corner work? Yes; the 90° cutting angle and compact overall length make the tool appropriate for precise shoulder and corner machining tasks. How heavy is the tool and how does that affect machine balance? The unit weighs 1.795 kg; consideration of dynamic balance and overhang is advised when used on high-speed spindles or bar-fed applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Robust corner turning with a 90° cutting geometry, a 32 mm shank and secure M4x10 Torx fastening ensures dependable repeatability and minimal set-up time; combined with compatibility for LNXT 1306 indexable inserts this head supports high uptime and consistent part quality. Order the corner tool head directly via Metav Werkzeuge or ask our consultants if needed. Corner Tool Head T676TM — Teknik Makina (90°) for LNXT 1306 Indexable Inserts Corner Tool Head T676TM offers a compact turning solution for CNC applications that require accurate right‑angle cuts using LNXT 1306 indexable inserts 90° cutting angle for precise corner turning 32 mm shank for secure toolholder mounting Compatible with LNXT 1306 indexable inserts M4x10 Torx fastening with T15 key required Achieve consistent corner geometry and shorter cycle times The right‑angle 90° cutting geometry is engineered to deliver repeatable corner profiles, reducing the need for rework and secondary operations. With a 32 mm shank and a compact overall length of 50 mm, the assembly stabilises the cutting motion and reduces vibration, which in turn prolongs insert life. The result is measurable production efficiency: fewer tool changes, predictable tolerances and a steady surface finish that supports lean machining workflows. Fast, secure clamping for improved process reliability A simple, robust fastening system — M4x10 Torx screw secured with a T15 key — enables quick insert seating and a firm mechanical connection between head and holder. Compatibility with Palbit‑manufactured inserts of type LNXT 1306 means replacement parts are widely available, and insert indexing is rapid, keeping machine downtime to a minimum. The head’s design prioritises clear access to the screw and predictable clamping force, which contributes directly to process stability and operator confidence. Built for integration into production environments Weighing 1.733 kg and featuring a 100 mm diameter contact profile, this turning head is designed for robust mounting while remaining compact enough for constrained toolstations. The eight cutting edges accommodate diverse cutting tasks and support a cost‑effective tool philosophy: multiple edges per insert extend service intervals and reduce per‑part tooling cost. Compatibility with standard indexable inserts simplifies inventory and helps maintain continuous throughput on mixed‑model production lines. Select the Teknik Makina corner tool head (T676TM) for reliable right‑angle turning and contact Metav Werkzeuge for tailored supply and application advice from their Emmerich facility Technical data Article number: T676TM Manufacturer: Teknik Makina Product name: Corner tool head For inserts: LNXT 1306 (for LNXT 1306 Indexable Inserts) Core measurements Shank diameter: 32 mm Overall length: 50 mm Diameter: 100 mm Cutting angle: 90° Number of cutting edges: 8 Weight: 1.733 kg Features & compatibility For LNXT 1306 indexable inserts Compatible with Palbit inserts Torx screw: M4x10 Torx key size: T15 Cutting geometry: corner (90°) FAQ Which insert type fits this turning head? The turning head accepts LNXT 1306 indexable inserts; compatibility with Palbit‑made LNXT 1306 inserts is specified for the Teknik Makina corner tool head (SKU T676TM). What fastening hardware is required for insert clamping? Clamping uses an M4x10 Torx screw; a T15 Torx key is required to achieve the specified clamping torque and secure the insert. Is this head suitable for heavy roughing operations? The head is designed for stable corner turning and repeatable right‑angle cuts; while robust, suitability for heavy roughing depends on machine rigidity and cutting parameters — the Teknik Makina head performs best where secure mounting and correct insert selection are observed. How does the weight affect toolholder dynamics? At 1.733 kg, the head adds mass to the tool assembly that helps damp vibration and stabilise cutting, which can improve surface finish and extend insert life when mounted correctly. Can the head be used with other insert manufacturers? The product is specified for LNXT 1306 inserts and listed as Palbit‑compatible; alternative manufacturers offering the same LNXT 1306 geometry are typically interchangeable, provided inserts match the LNXT 1306 specification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of robust compatibility, built-in coolant management and precise clamping to keep turning cycles stable and tool changes fast; order the tool via Metav Werkzeuge or contact their consultants for specification advice. Corner tool head T412-1TM — 100 mm diameter, internal coolant (Teknik Makina) A compact corner tool head engineered for lathe and turning operations, designed to accept R390-17 indexable inserts for efficient face and profile turning. 100 mm diameter tool head Internal coolant supply Compatible with R390-17 inserts (Sandvik) 90° cutting angle, 8 cutting edges Greater process reliability through proven compatibility and coolant control The tool head delivers consistent results thanks to its internal coolant channel and standardised interface. With a 100 mm diameter and support for R390-17 indexable inserts, the component is optimised for stable face and corner turning tasks in production environments. Internal coolant reduces heat at the cutting edge and improves chip evacuation, which extends insert life and stabilises cycle times. Designed for compatibility with Sandvik inserts, the unit minimises set-up complexity and supports predictable machining windows, ensuring reliable throughput for workshops and industrial cells. Secure clamping and serviceable fastenings for predictable maintenance Mechanical details focus on quick, repeatable tightening and straightforward maintenance: the clamping hardware uses a Torx T15 key and M3.5x8.5 screws for reproducible torque and secure insert retention. The compact overall length of 52 mm and a mount diameter of 32 mm provide a rigid connection to the toolholder, while the assembly mass of 1.665 kg contributes to vibration damping in demanding turning jobs. These attributes reduce the frequency of corrective adjustments and support a straightforward spare-parts strategy in a busy workshop. Designed to lift productivity and simplify tooling choices With 8 cutting edges and a 90° cutting angle, the head supports efficient material removal on shoulders and profiles while maintaining dimensional control. The standardised insert family and robust coolant routing enable longer uninterrupted runs and help to lower overall tooling cost per part through extended insert life. Built for repetitive industrial use, the component suits metalworking shops that require dependable tooling interfaces and clear performance expectations in both small-batch and continuous turning operations. Contact Metav Werkzeuge for expert advice on integration, delivery from Emmerich and specification support for the T412-1TM corner tool head with internal coolant Technical data Article number: T412-1TM SKU: T412-1TM Product type: Corner tool head Name: Corner tool head for R390-17 indexable inserts Brand: Teknik Makina Key measurements Diameter: 100 mm Total length: 52 mm Mount diameter: 32 mm Weight: 1.665 kg Cutting edges: 8 Cutting angle: 90° Torx key: T15 Torx screw: M3.5x8.5 Features & compatibility Internal coolant Compatible inserts: R390-17 Compatible insert manufacturer: Sandvik Intended use: Turning / face and corner operations Manufacturer: Teknik Makina FAQ Which insert type fits this tool head? The corner tool head accepts R390-17 indexable inserts; the design is compatible with inserts from Sandvik for straightforward procurement and tooling standardisation. Is coolant delivered to the cutting edge? Yes, the T412-1TM features internal coolant routing to the insert zone to improve cooling and chip evacuation during turning operations. What is the required tightening tool for the clamping screws? Screws use a Torx T15 key with fasteners sized M3.5x8.5, providing repeatable torque and secure insert retention. Which mounting interface does the head use? The head is specified with a 32 mm mount diameter for integration into compatible toolholders and turret systems. For which machining tasks is this head best suited? The component is designed for face and corner turning where a 90° cutting angle and multiple cutting edges support efficient material removal and dimensional control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a combination of high rigidity and proven insert compatibility to increase cycle stability and reduce tool changes; the compact design and secure 32 mm shank ensure reliable clamping and consistent results — order via Metav Werkzeuge or consult the technical team for process matching. Corner milling head by Teknik Makina — 100 mm diameter, 8 cutting edges A robust corner milling head engineered for milling operations with SNHU 1206 indexable inserts, designed to deliver stable cutting performance in roughing and profile work. 100 mm diameter for heavy material removal Eight cutting edges for longer tool life 32 mm shank for secure toolholder clamping Compatible with SNHU 1206 Palbit inserts Maximised machining efficiency with a rigid cutting geometry The compact cutter body and substantial 100 mm diameter provide improved engagement stability, which directly translates into reduced vibration and more predictable cutting forces. With eight cutting edges, the tool head spreads wear over multiple edges, extending service intervals and lowering cost per cut. The 32 mm shank guarantees a secure clamping interface, reducing micro‑movement during heavy cuts and enabling higher material removal rates without sacrificing surface quality. Serviceability and insert compatibility reduce downtime Designed for SNHU 1206 indexable inserts, the tool accepts widely available Palbit plates for flexible grade selection and rapid replacement. The fixing uses an M4x10 Torx screw with a T15 key, allowing fast, repeatable insert changes and straightforward maintenance routines. This simplicity shortens tool changeover times on the shop floor and supports a lean production flow, while the modest overall length and balanced mass contribute to handling ease and predictable dynamic behaviour. Proven supply and application support for process reliability Sourced and dispatched through Metav’s European distribution hub, this machining head benefits from stringent quality checks and consistent stock handling to avoid last‑minute interruptions. As a component in a broader tooling strategy, the cutter head integrates into reliable setups that favour throughput and reproducibility. For application pairing, Metav’s specialists can advise on insert grades and holder selection to match material and cutting data, securing consistent part quality and repeatable cycle times. Contact Metav Werkzeuge for tailored application advice on Teknik Cutting Tools components — call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm the right holder, insert grade and delivery options Technical Data Article number: T620TM Brand: Teknik Makina Product: Corner milling head For indexable inserts: SNHU 1206 Facts Diameter: 100 mm Cutting edges: 8 Shank diameter: 32 mm Total length: 50 mm Weight: 1.459 kg ECLASS: 21181015 Special features Torx screw: M4x10 Torx key size: T15 Compatible insert manufacturer: Palbit Suitable for: SNHU 1206 indexable inserts FAQ What insert type does this cutter accept? The cutter accepts SNHU 1206 indexable inserts; it is designed for standard SNHU geometries and is compatible with inserts from Palbit. What is the shank diameter and why is it important? The tool features a 32 mm shank, which ensures a secure fit in appropriately sized toolholders and improves rigidity during machining. How many cutting edges are available and what is the benefit? With eight cutting edges, wear is distributed across multiple edges, increasing the effective tool life and reducing frequency of changeovers. Which fastener and key are required for insert fastening? Insert clamping uses an M4x10 Torx screw tightened with a T15 wrench for quick and repeatable insert changes. What is the SKU for ordering and identification? The article number for ordering is T620TM, manufactured by Teknik Cutting Tools and distributed via Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of 100 mm diameter rigidity, internal coolant, and compatibility with WNGX 0806 inserts for steady shoulder turning and reduced downtime; order the tool directly via Metav Werkzeuge or consult the team for specification support. Eckmesserkopf — 100 mm square-head with internal coolant (Teknik Makina) The Eckmesserkopf for WNGX 0806 indexable inserts is a 90° square-shoulder turning head designed for precision facing and shoulder operations in industrial turning applications. 100 mm diameter for stable cutting Internal coolant supply Compatible with Korloy WNGX 0806 inserts 90° cutting angle for square shoulders Greater stiffness for consistent machining results A larger-diameter tool body translates directly into reduced deflection and steadier cuts. With a 100 mm diameter and an overall length of 52 mm, this turning head offers improved rigidity, which helps maintain dimensional accuracy on shoulder faces and stepped parts. The 90° geometry ensures a true square shoulder finish, reducing the need for secondary operations and shortening cycle times. The relatively compact mass at 1.58 kg contributes to a stable rotating assembly without unnecessary overhang. Targeted cooling and fast insert maintenance Internal coolant delivery channels the cutting fluid precisely to the cutting edge, reducing thermal load and flushing chips away from the contact zone. The result is extended insert life and more consistent surface quality over long production runs. Designed for WNGX 0806 indexable inserts, with compatibility specified for Korloy inserts, the head supports changeovers with a standard M5x12 insert screw and a Torx T20 key interface, enabling quick and reproducible insert seating. The head accommodates eight indexed cutting positions, which provides economical use of each insert before replacement is required. Robust workflow integration and straightforward upkeep This tool head is intended for production environments where uptime and predictable performance matter. The combination of repeatable clamping via the M5x12 screw and Torx drive, together with internal coolant, reduces maintenance intervals and helps operators keep machines running longer between interventions. The design simplifies stocking and tool management by using a common insert format (WNGX 0806), ensuring readily available consumables. The SKU T778-1TM and the Teknik Makina build quality support integration into existing turret or toolblock setups with minimal rework. Contact Metav Werkzeuge for tailored application advice and to arrange supply directly from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for specification assistance and ordering support. Technical data SKU: T778-1TM Manufacturer: Teknik Makina ECLASS: 21181015 Product type: Eckmesserkopf Facts Diameter: 100 mm Overall length: 52 mm Weight: 1.58 kg Cutting angle: 90° Number of cutting positions: 8 Special features Internal coolant For WNGX 0806 indexable inserts Compatible insert manufacturer: Korloy Insert screw: M5x12 Torx key: T20 FAQ Which inserts are compatible with this head? The head accepts WNGX 0806 indexable inserts; Korloy-manufactured inserts are listed as compatible for this turning solution. Does the tool provide through-tool coolant? Yes — the Eckmesserkopf features internal coolant, which supplies cutting fluid directly to the tool tip to lower cutting temperatures and aid chip evacuation. What is the cutting geometry and its advantage? A 90° cutting angle delivers true square shoulders and clean faces, reducing secondary finishing and improving assembly fit where perpendicular surfaces are required. What fastening hardware is required for insert changes? Insert clamping uses an M5x12 screw with a Torx T20 drive for secure and repeatable seating. Can this head be used for heavy shoulder cutting? The 100 mm diameter body and compact 52 mm length increase stiffness for demanding shoulder operations; suitability will depend on machine rigidity and machining parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, 90° corner insert head that combines compatibility with WNMU 0705 indexable inserts and a compact 32 mm arbor for reliable integration into existing tool setups; order the component directly via Metav Werkzeuge or consult the Metav specialists for application advice. Corner Insert Head – 90° cutting angle, Ø100 mm head, Teknik Makina The Corner Insert Head is an angled insert holder designed for precision corner and facing operations using WNMU 0705 indexable inserts. Compatible with WNMU 0705 indexable inserts 90° cutting angle for precise corner work Ø100 mm head diameter for stable cutting Clamped by M4x10 Torx screw, T15 key Stable, repeatable cuts with a 90° geometry The 90° cutting geometry delivers consistent cornering and facing, reducing setup variability on serial and single-part jobs. With a head diameter of Ø100 mm and a 32 mm shank, the assembly provides mass and rigidity where it matters, which helps to lower vibration and improve surface quality. This stability is particularly beneficial in mixed-production workshops that switch between short runs and medium batches, allowing predictable tool performance and fewer reworks. Fast insert changes and secure clamping to minimise downtime Designed for WNMU 0705 indexable inserts, the tool uses an M4x10 Torx screw secured with a T15 key, providing a compact, reliable clamping method that speeds up index and replacement cycles. Compatibility with ISCAR-style inserts simplifies stocking and reduces the number of special items required in the tool crib. Faster tool changes translate into higher effective machine availability and a clearer cost-per-part picture for production planning. Compact integration for flexible workshop use With a total length of 50 mm, a head diameter of 100 mm, and a weight of 1.342 kg, the holder is sized for straightforward integration into standard tool turrets and holders that accept a 32 mm arbor. The unit features eight cutting edges, enabling staged rotation of inserts to extend service intervals and reduce consumable waste. The compact form factor supports both constrained setups and retrofit scenarios where space and tool-overlap must be managed. For tailored advice on incorporating the Teknik Makina corner insert head into existing machining cells, contact Metav Werkzeuge — Metav’s consultants can review compatibility, recommend inserts, and arrange supply from Emmerich; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 to discuss SKU T395TM and application requirements. Technical Data SKU: T395TM Manufacturer: Teknik Makina Product: Corner insert head for WNMU 0705 indexable inserts Brand designation: for WNMU 0705 Indexable Inserts Dimensions & Core Data Head diameter: 100 mm Total length: 50 mm Shank / arbor diameter: 32 mm Weight: 1.342 kg Cutting angle: 90° Cutting edges: 8 Compatibility & Features For WNMU 0705 indexable inserts Compatible with ISCAR inserts Torx screw: M4x10 Torx key size: T15 SKU reference: T395TM FAQ Which insert type fits this head? The corner insert head is designed for WNMU 0705 indexable inserts and is compatible with ISCAR-style WNMU plates, making insert sourcing straightforward for standard machining tasks. What clamping hardware is required for insert changes? Inserts are secured with an M4x10 Torx screw, tightened or released using a T15 key for reliable, repeatable clamping during changeover. Which arbor or holder accepts this head? The tool requires a holder or turret accepting a 32 mm shank, enabling direct mounting in systems designed for that arbor diameter and ensuring stable, concentric clamping. Is this head suitable for tight installation spaces? Yes; the compact 50 mm total length and relatively small footprint allow integration into constrained tool layouts while maintaining a Ø100 mm cutting face for stable engagement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the 90° cutting geometry, internal coolant and proven compatibility with LNMX 1510 indexable inserts to improve cycle stability and reduce setup time; order the tool head directly via Metav Werkzeuge or request tailored advice from our consultants. 90° Corner Insert Holder Ø100 mm — for LNMX 1510 Indexable Inserts by Teknik Makina A robust 90° Corner Insert Holder engineered for precision turning with LNMX 1510 indexable inserts, combining compact dimensions and internal coolant for reliable chip control in industrial turning operations. Ø100 mm cutting head diameter Internal coolant for improved tool life Compatible with Korloy LNMX 1510 inserts Compact L52 mm overall length Consistent 90° geometry for repeatable turning The holder’s fixed 90° cutting angle yields predictable engagement and stable cutting forces, which improves process repeatability on serial components. Built around a Ø100 mm head and a short 52 mm overall length, the design reduces overhang and increases rigidity, translating into fewer vibrations and more consistent surface finish. This geometry is particularly beneficial when precise shoulder and face turning are required on medium-duty turning centres. Productivity gains through internal coolant and secure clamping Integrated internal coolant directs fluid close to the cutting edge, lowering cutting temperatures and extending insert life for longer unmanned runs. The clamping system uses M4x12.5 torx screws with a T15 drive for secure, repeatable insert fixation, enabling fast and reliable index changes. Together these features reduce non-productive time and help maintain stable cutting parameters across batch production. Compatibility and straightforward tool replacement Designed specifically for LNMX 1510 indexable inserts and optimised for Korloy grades, the tool head fits into established turning tool portfolios and is suited for workshops standardising on that insert family. The 32 mm shank interface provides a compact footprint while the unit’s weight of 1.644 kg gives a solid feel that aids damping during interrupted cuts. This balance of compatibility and mass supports easier integration into existing setups without complex adjustments. Serviceability and industrial-grade manufacturing The component is manufactured by Teknik Makina to industrial tolerances and keeps maintenance straightforward: insert changes are executed with common torx tooling and coolant channels can be flushed during routine service. The holder’s construction focuses on longevity and low-maintenance operation, which supports continuous production schedules and reduces the frequency of unscheduled interventions. For technical procurement or to source Teknik Cutting Tools components, contact Metav Werkzeuge for a tailored quotation and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s specialists will assist with compatibility checks and fast supply. Technical data Article number: T378-1TM SKU: T378-1TM UID: T378-1TM ECLASS: 21181015 Numbers / Core technical data Head diameter: 100 mm Overall length: 52 mm Shank diameter: 32 mm Weight: 1.644 kg Cutting edges: 8 Cutting angle: 90° Torx screw: M4x12.5 Torx key: T15 Internal coolant: yes Special features / Compatibility For LNMX 1510 indexable inserts Compatible insert manufacturer: Korloy Product type: Corner insert holder Label: 100mm Eckmesserkopf LNMX 1510 L52mm mit Innenkühlung Manufacturer: Teknik Makina FAQ Which insert type fits this tool head? The holder is designed for LNMX 1510 indexable inserts, ensuring correct seat geometry and stable clamping for that family of inserts. Is internal coolant incorporated and how does it help? Yes — the internal coolant channel supplies cutting fluid close to the edge, which reduces temperature, improves chip control and extends insert life in continuous operations. What fastening hardware is required for insert clamping? Insert clamping uses M4x12.5 torx screws tightened with a T15 torx key to ensure secure and repeatable fixation. Can this holder be used with Korloy inserts? Compatibility with Korloy LNMX 1510 grades is confirmed; the seat and clamping geometry are matched for reliable use with those inserts. What are the key dimensions that affect rigidity? The Ø100 mm head and L52 mm overall length minimise overhang, improving rigidity and damping compared with longer tooling extensions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak. No:9, Selcuklu/KONYA/TURKEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com