Gibt es einen Hahn und Kolb Online Shop?

Compact, reliable fastening with a secure Torx head and standard M4 metric thread — the small form factor (Ø 5.2 mm, length 11 mm) makes it well suited for precise assemblies and repeatable production processes. Order via Metav Werkzeuge or consult the technical team for batch supply and specification matching. Torx Screw TC079TM — M4 thread, 5.2 mm diameter | Teknik Makina Torx Screw TC079TM — a compact fastening solution for workshop and industrial assemblies, engineered for consistent drive engagement and standardised metric threading. Secure Torx head for positive drive M4 metric thread for standard assemblies 5.2 mm diameter for tight fit tolerances 11 mm overall length for compact applications Consistent drive performance for efficient assembly The Torx head profile delivers a reliable contact surface that reduces cam‑out and allows higher torque transmission compared with conventional recessed drives. For production environments where tool changeover and assembly speed matter, this profile supports repeatable torque application and lowers the risk of damaged fastener heads. Compatibility with a Torx key T15 ensures the component integrates seamlessly into standard driver sets and assembly fixtures. Metric thread stability to maintain joint integrity With an M4 metric thread, the fastener conforms to widely accepted metric systems used across mechanical assemblies. The combination of the M4 thread and the measured shank diameter of 5.2 mm provides predictable engagement and thread pitch behaviour, which simplifies torque settings and quality control. Using standardised components like this screw reduces the need for bespoke fasteners, aiding inventory management and procurement efficiency for production and maintenance teams. Small size, big application range The compact 11 mm overall length and a head angle of 45° (where applicable) make this screw particularly useful where space is restricted or where flush or near‑flush seating is required. Although the material is not specified in the data set, the dimensional accuracy and the Torx drive render the part suitable for precision fastening tasks in general workshop assemblies and light machinery. Batch procurement via an established distributor supports consistent supply and reduces lead‑time variability. Contact Metav Werkzeuge for quantity supply, specification matching or to discuss suitable driver options for the Teknik Makina Torx Screw TC079TM — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: TC079TM Brand: Teknik Makina ECLASS: 21189290 ** Dimensions & measurable data Diameter: 5.2 mm Thread: M4 Overall length: 11 mm Head angle: 45° Weight: 0.1 kg ** Design & special features Torx head profile Suitable for Torx key T15 Metric thread standard Compact length for tight assemblies ** FAQ What driver is required for this Torx screw? A Torx key T15 is specified as the compatible driver for this Torx screw; using the correct T15 driver ensures secure engagement and consistent torque transfer. Is the thread size compatible with DIN standard components? The fastener uses an M4 metric thread, which aligns with common metric component standards and simplifies integration with standard nuts and pre‑tapped holes. Can this screw be used where space is limited? Yes — the 11 mm overall length and compact diameter make it suitable for confined assemblies and applications requiring near‑flush fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the precise compatibility with CCMT 0602 inserts and the compact 11 mm cutting diameter for consistent internal turning results; the compact S08-10J design and secure shank allow efficient tool changes and reduced setup time. Order the boring bar directly via Metav Werkzeuge or consult our specialists for selection assistance. Boring bar S08-10J — 11 mm for CCMT 0602 indexable inserts by Teknik Makina The boring bar S08-10J is a compact internal-turning tool designed for use with CCMT 0602 indexable inserts, offering a stable solution for right-hand finishing and semi-finishing operations. *11 mm cutting diameter for fine boring *Shank Ø10 mm for secure clamping *Compatibility with CCMT 0602 indexable inserts *Overall length 110 mm, right-hand cutting Precision compatibility for consistent finishes The S08-10J is engineered to ensure repeatable accuracy when paired with CCMT 0602 indexable inserts. Its 11 mm cutting diameter provides a narrow footprint that helps to reduce vibration and maintain tight tolerances during internal turning. For workshops aiming to standardise tooling, this configuration reduces the need for special adaptations and shortens set-up times, supporting a more predictable production flow. Stable clamping and reliable cutting geometry A shank Ø10 mm and a cutting-height of 27 mm give the tool a compact yet robust support, improving rigidity at the cutting zone. The 95° cutting angle and right-hand cutting direction are optimised for conventional internal turning cycles; the Torx screw specification (M2.5x5.5) and Torx T8 key interface ensure secure insert fixation, which in turn contributes to a consistent surface finish and extended insert life. Practical integration into workshop inventories With an overall length of 110 mm and a lightweight construction (approx. 0.065 kg), the S08-10J is easy to store and handle on busy benches. The designation S08-10J (SKU: K294TM) simplifies ordering and inventory control. Choosing this compact boring bar streamlines tooling assortments and allows quicker changeovers, which supports higher machine utilisation and lower downtime in mixed-production environments. Designed for internal turning and finishing tasks This tool is intended for internal turning operations where small-diameter boring and fine surface control are required. The combination of a compact diameter, defined cutting geometry and secure fixing makes the tool suitable for finishing and light to medium-duty semi-finishing cycles. Where precision and predictability are priorities, this boring bar provides a balanced solution between rigidity and accessibility. Contact Metav Werkzeuge to confirm suitability of the Teknik Makina S08-10J boring bar for specific applications and to arrange prompt delivery from Emmerich. Technical data SKU: K294TM Model: S08-10J Label: 11mm Bohrstange CCMT 0602 L110mm Manufacturer: Teknik Makina Core specifications Cutting diameter: 11 mm Shank diameter: 10 mm Overall length: 110 mm Cutting height: 27 mm Weight: 0.065 kg Cutting angle: 95° Screw: M2.5x5.5 Torx key: T8 Cutting direction: right Features & compatibility For CCMT 0602 indexable inserts Right-hand cutting direction Cutting-head/clamp width: 6 mm For internal turning / boring operations SKU K294TM, designation S08-10J FAQ Is this boring bar compatible with CCMT 0602 inserts? Yes. The S08-10J boring bar is specifically designed for use with CCMT 0602 indexable inserts and provides the correct seating and clearance for reliable operation. What are the key dimensions for clamping and setup? The tool has a shank diameter of 10 mm, an overall length of 110 mm and a cutting diameter of 11 mm, which should be considered when selecting a holder and setting over the tool. Which screw and key are required for the insert? The insert is secured with a Torx screw M2.5x5.5 using a Torx T8 key for stable fixation and straightforward insert changes. What cutting direction and angle does the tool use? The boring bar is configured for right-hand cutting with a 95° cutting angle, making it suitable for standard right-hand internal turning operations. How is the S08-10J identified for ordering and stock? Order and stock the tool using SKU K294TM or model S08-10J; the label description "11mm Bohrstange CCMT 0602 L110mm" provides a concise identification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise compatibility with CCMT 0602 indexable inserts, effective chip control through internal coolant, and a compact 110 mm overall length that suits restricted setups; order the component directly via Metav Werkzeuge or consult the team for application-specific advice. Drill bar A08-10J for CCMT 0602 indexable inserts — 11 mm, internal coolant (Teknik Makina) The Drill bar A08-10J is a compact drilling bar designed for use with CCMT 0602 indexable inserts, delivering through-tool coolant and reliable left-hand cutting for tight bores and interrupted cuts 11 mm diameter with 10 mm shaft Internal through-tool coolant for chip evacuation Compatible with CCMT 0602 indexable inserts Left-hand cutting, 95° cutting angle Consistent chip control and coolant efficiency for uninterrupted runs The combination of internal coolant and a compact 110 mm overall length provides a controlled coolant flow directly to the cutting edge, improving lubrication and chip evacuation in confined bores. With an 11 mm body and a 10 mm shaft, the holder keeps rigidity while fitting into standard small-tooling set-ups; the reduced overhang and stable shank translate into fewer vibrations and more predictable tool life. The design supports continuous operation in series production where consistent removal of swarf and thermal stability matter for repeatable hole quality. Quick insert changes and standardised clamping for minimal downtime Compatibility with CCMT 0602 indexable inserts enables economical machining by allowing fast insert replacement instead of full-tool swaps. The clamping geometry accepts standard insert sizes and uses a Torx T8 engagement with M2.5x5.5 retention screws for familiar maintenance routines. A 6 mm clamping-head width ensures reliable seating of the insert, simplifying set-up in production cells and reducing fixture adjustment time. This standardisation supports streamlined inventory and lowers the overall cost per hole. Stable cutting geometry for accurate, repeatable holes A 95° cutting angle combined with a left-hand cutting orientation offers a near-orthogonal approach suitable for shoulder-forming and bore finishing where axial location and edge support are required. The 27 mm cutting-edge height and the compact mass (approx. 0.065 kg) contribute to a controlled cutting engagement, reducing chatter and supporting consistent hole diameter. The robust mechanical interface and precise geometry help maintain surface finish and concentricity across batch runs, supporting higher first-pass yield in component production. Contact Metav Werkzeuge for expert application advice and order processing for Teknik Cutting Tools drill bars with internal coolant (KA507TM), available from our Emmerich stock filter Technical data SKU: KA507TM Model: A08-10J Product type: Drill bar Manufacturer: Teknik Makina Core dimensions Diameter: 11 mm Shaft diameter: 10 mm Overall length: 110 mm Cutting-edge height: 27 mm Clamping-head width: 6 mm Weight: 0.065 kg Cutting angle: 95° Materials & features Compatible inserts: CCMT 0602 Internal coolant: yes Cutting direction: left-hand Torx key: T8 Retention screw: M2.5x5.5 eClass: 21180806 FAQ What inserts fit this drilling bar? The drilling bar accepts CCMT 0602 indexable inserts; the clamping geometry and 6 mm head width are prepared for that insert size and standard seating. Is through-tool coolant available on this model? Yes, the A08-10J provides internal coolant to the cutting edge to support chip evacuation and lubrication during drilling. Which cutting direction does the tool use? This drill bar is configured for left-hand cutting operations with a 95° cutting angle for near-orthogonal engagement. What is the correct retention screw and key for insert changes? Insert retention uses M2.5x5.5 screws with a Torx T8 drive for reliable, standardised replacement. Can this bar be used in confined bores and short overhangs? The compact 110 mm overall length and 11 mm diameter make it well suited to limited-access bores where short overhang and rigidity are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compatibility with CCMT 0602 indexable inserts, integrated internal coolant and compact dimensions for reliable metalworking cycles; order the tool directly via Metav Werkzeuge or consult the technical team for tailored advice. Boring bar KA501TM – 11 mm with internal coolant (Teknik Cutting Tools) The Boring bar KA501TM is a compact boring bar for CCMT 0602 indexable inserts, engineered for right‑hand cutting in precision metalworking applications. *11 mm cutting diameter *Internal coolant supply *Compatible with CCMT 0602 inserts *Compact 110 mm overall length Consistent insert compatibility for uninterrupted production The design centres on straightforward use with CCMT 0602 indexable inserts, a widely available carbide grade for general turning and light boring. This compatibility ensures fast insert changes and predictable cutting behaviour, reducing downtime in batch production. The right‑hand cutting orientation and a 95° cutting angle deliver a secure engagement in conventional setups, while the clamp head width 6 mm secures inserts with repeatable positioning. For purchasing and stocking decisions, compatibility with standard inserts supports lean inventory management and lower per‑part tooling costs. Targeted coolant delivery for improved tool life and surface finish Integrated internal coolant channels provide direct coolant flow to the cutting zone, improving heat removal and chip evacuation during interrupted cuts. Direct cooling reduces thermal load at the edge, which contributes to prolonged insert life and more consistent surface quality on workpieces. In practice, this enables higher process reliability when machining steels and common alloys where temperature control matters; inspectors will note fewer edge wear deviations and operators benefit from reduced rework rates. The internal coolant feature also simplifies setup compared with external nozzles and helps to maintain a stable cutting environment. Compact geometry and practical handling for workshop use With a cutting diameter of 11 mm, shank diameter 10 mm and an overall length of 110 mm, the bar is optimised for operations where space and rigidity must be balanced. The tool has a cutting height of 27 mm and is supplied with a Torx T8 drive and M2.5×5.5 Torx screw, facilitating secure assembly and straightforward maintenance. At a mass of approximately 0.065 kg, handling is simple and tool change is rapid, supporting efficient machine setup. The integrated ISO designation A08‑10J and SKU KA501TM make catalogue and stock control transparent for procurement teams and workshop managers. Contact Metav Werkzeuge for procurement and technical guidance on the Teknik Cutting Tools KA501TM — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: KA501TM ISO designation: A08-10J Manufacturer: Teknik Makina Eclass: 21180806 Facts Cutting diameter: 11 mm Shank diameter: 10 mm Overall length: 110 mm Cutting height: 27 mm Cutting angle: 95° Clamp head width: 6 mm Weight: 0.065 kg Special features Internal coolant: yes Compatible inserts: CCMT 0602 Cutting direction: right Torx key: T8 Torx screw: M2,5x5,5 Product type: Boring bar SKU: KA501TM Label: 11 mm boring bar CCMT 0602 L110 mm with internal coolant FAQ Is this tool compatible with CCMT 0602 inserts? Yes. The Boring bar KA501TM is designed for CCMT 0602 indexable inserts and secures them with a 6 mm clamp head for repeatable positioning. Does the bar provide internal coolant supply? Yes. The KA501TM features internal coolant channels to deliver coolant directly to the cutting edge, improving tool life and chip control. What are the main dimensions for mounting? The tool has a cutting diameter of 11 mm, shank diameter 10 mm and overall length 110 mm, data that supports fixture and holder selection. Which screw and key are required for insert clamping? The bar uses a Torx screw M2,5×5,5 and requires a Torx T8 key for insert clamping and replacement. Is the KA501TM suitable for right‑hand machining only? The boring bar is specified for right‑hand cutting and is optimised for conventional right‑hand turning and boring operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, mechanically reliable locking solution that combines a standard M6 thread with easy operation via a 3 mm Allen key for consistent measurement retention; order spares or discuss fitting options through Metav Werkzeuge's consultants. Locking screw TC044TM — M6 thread, Allen key operation (Teknik Makina) Locking screw TC044TM for precision calipers and measuring tools, designed to secure sliding parts and prevent unwanted movement during measurement. M6 thread for secure fastening Operated with 3 mm Allen key 11 mm diameter for compact fit 27 mm total length for standard integration Secure fixation for stable measurements A reliable locking fastener delivers measurable benefits for workshop metrology: the M6 thread ensures a firm connection that resists slippage under normal handling, while the 3 mm Allen key operation enables controlled torque application without specialised tools. By preventing unintended axial movement, the locking screw TC044TM contributes directly to improved repeatability and stable measurement results in routine inspection tasks. In production environments where incremental errors accumulate, a dependable locking fastener reduces rework and supports consistent quality control. Compact dimensions that simplify retrofitting With an external diameter of 11 mm and a total length of 27 mm, the component is engineered for straightforward integration into common caliper designs and measuring fixtures. The modest weight of 0.1 kg minimises added mass to sliding assemblies and helps maintain instrument balance. These compact dimensions mean the part occupies little storage space yet remains accessible as a routine spare, reducing machine downtime during replacement and ensuring measuring instruments return quickly to service with minimal adjustment effort. Workshop-friendly design for dependable upkeep Designed for ease of maintenance and repeatable handling, this locking fastener accepts a standard hex key and is suited for rapid exchange during scheduled checks or ad hoc repairs. The straightforward interface minimises service time and makes inventory management more predictable, which supports operational continuity on the shop floor. For compatibility checks or fitting guidance, Metav Werkzeuge's technical advisors can confirm suitability for specific caliper models and offer practical recommendations to preserve precision and uptime. For reliable measurement retention choose the Teknik Makina M6 locking screw TC044TM — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for ordering and technical advice Technical data Article number: TC044TM Manufacturer: Teknik Makina SKU: TC044TM Allen key size: 3 mm Facts Weight: 0.1 kg Diameter: 11 mm Thread: M6 Total length: 27 mm Special features Product: Locking screw (Verriegelungsschraube) Operation: Allen key (hex) actuation Intended application: Precision calipers and measuring tools Brand: Teknik Makina FAQ What size Allen key is required for installation? The locking screw TC044TM requires a 3 mm Allen key for tightening and removal. Is this locking screw compatible with standard calipers? Yes, the Teknik Makina locking screw TC044TM is designed for use with precision calipers and similar measuring instruments that accept an M6 locking fastener. Which thread specification does the screw use? The component features an M6 thread, providing a secure fastening interface suitable for many workshop measuring assemblies. How compact is the part for retrofitting and spares management? With an 11 mm diameter and a total length of 27 mm, the TC044TM is compact and easy to stock as a spare, supporting rapid replacement and reduced instrument downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compact design and proven insert compatibility to keep setups quick and repeatable; the short overhang and S16 shank combination provides stable clamping and reduced vibration for smooth grooving operations — order directly via Metav Werkzeuge or consult their specialists for application advice Mini grooving clamp holder (K804TM) — S16 shank, Ø11 mm cutting head, L130 A mini grooving clamp holder designed for precision parting and grooving tasks in confined toolposts, compatible with NFTG 16 inserts from Korloy S16 shank for secure toolholding Compatible with Korloy NFTG 16 inserts Ø11 mm cutting head, 30 mm cutting height Compact length L130 for tight spaces Precise, compact design for confined toolposts The Mini grooving clamp holder (K804TM) is engineered to deliver stable clamping in restricted setups where long overhangs are not acceptable. Its S16 shank and short overall length L130 reduce leverage and vibration, which improves repeatability and surface finish during grooving or parting operations. With a compact cutting head of Ø11 mm and a cutting height of 30 mm, the toolholder suits small-batch runs and repair tasks where machine access is limited. The reduced mass and trimmed profile make the holder easier to manoeuvre during quick changeovers while maintaining the rigidity required for repeatable cuts. Proven insert compatibility and dependable clamping principle Compatibility with NFTG 16 inserts by Korloy ensures a wide choice of insert grades for various materials and chip control strategies. The clamp-style seating secures the insert reliably, enabling consistent chip formation and stable edge life under interrupted cuts. Because the insert system is standardised, replacement and inventory management are simplified, minimising downtime. This holder’s geometry supports a direct clamping force that keeps the insert seated during heavy engagement, which translates into predictable tool life and fewer mid-run adjustments. Workflow benefits for production and maintenance environments Designed for quick installation and repeatable positioning, this holder helps reduce setup time across multiple machines. The clear numerical specifications — shaft diameter 16 mm, cutting head Ø11 mm, overall length 130 mm, weight 0.348 kg — allow planners to match the toolholder to toolposts and turret stations with confidence. For workshops aiming to streamline tooling variety, the compact grooving holder lowers the need for longer, specialised holders and facilitates faster tool changes. Its robust construction supports routine industrial use while maintaining cost-effective maintenance cycles. Contact Metav Werkzeuge in Emmerich for application guidance, stock availability and fast dispatch — info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: K804TM Manufacturer: Teknik Makina Item name: Mini Stechklemmhalter Core dimensions Shank diameter: 16 mm Cutting height: 30 mm Cutting diameter: 11 mm Overall length: 130 mm Weight: 0.348 kg Compatibility & features For inserts: NFTG 16 Compatible insert maker: Korloy Shank designation: S16 EClass: 21181005 FAQ What insert types fit this holder? The holder accepts NFTG 16 grooving/parting inserts; Korloy grades in the NFTG 16 format are suitable for a wide range of materials used with this clamp holder (K804TM). Which machines is the holder suitable for? The compact S16 shank and L130 length make the holder appropriate for lathes and turning centres with limited toolpost clearance where short overhang is required. How does clamping affect repeatability? The clamp-style seating in the mini grooving clamp holder secures the insert firmly, providing repeatable positioning and consistent cutting performance across repeated tool changes. Can the holder be used for heavy interrupted cuts? The holder’s short overhang and robust clamping principle increase stability; for severe interrupted cuts, select appropriate insert grades and machining parameters for the application. What are the key dimensions to check before ordering? Verify shank diameter 16 mm, cutting diameter 11 mm, and overall length 130 mm to ensure compatibility with the machine turret and toolpost. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable solution that combines repeatable hole quality and straightforward maintenance: the drill’s Ø11 mm cutting diameter and 33 mm effective cutting length ensure consistent performance, while the 16 mm shank and 45 mm shank length provide rigid clamping and reduced run-out. Order the solid drill directly via Metav Werkzeuge or ask our consultants if needed. Vollbohrer U34TM – Indexable insert drill, Ø11 mm, compatible with Taegutec inserts by Teknik Makina Vollbohrer U34TM is an indexable insert drill designed for stable, repeatable drilling with replaceable inserts, suitable for machining setups that require quick insert changes and consistent hole quality. Ø 11.00 mm cutting diameter 33 mm effective cutting length 16 mm solid shank with 45 mm shank length Compatible with XCGT 050204 inserts by Taegutec Higher repeatability through rigid shank and defined cutting length The U34TM delivers improved hole repeatability thanks to a 16 mm solid shank that reduces deflection under load and a precisely defined 33 mm cutting length that limits contact to the tool’s designed working zone. This configuration supports stable chip formation and consistent tool engagement, which is particularly beneficial in batch production or when tight positional tolerances are required. The reduced risk of run-out translates into fewer rejected parts and lower rework effort, giving a tangible productivity advantage on the shop floor. Cost effectiveness via replaceable indexable inserts By accepting the XCGT 050204 indexable insert, the drill separates cutting geometry from the tool body, enabling quick insert changes without removing the holder from the machine. This design reduces downtime and tooling expenditure over time: worn cutting edges are replaced, not entire drills. The compatibility with Taegutec inserts provides access to a wide range of proven grades and geometries, allowing selection of the insert best suited to the actual machining task. Cleaner inventory management and faster set-up cycles are direct operational benefits of this approach. Practical integration and workshop convenience With an overall length of 92 mm and a modest weight of 0.112 kg, this indexable drill is compact enough for common holder setups while providing the working reach expected from an industrial tool. The Ø11 mm diameter and standard 16 mm shank facilitate mounting in common clamping systems and reduce the need for special adapters. For users who require additional details on mounting or insert selection, Metav’s technical team is available to advise on the optimal insert grade and clamping method for the intended application. For tailored advice or to secure stock from Metav Werkzeuge’s Emmerich warehouse—trusted for rapid supply and technical support—contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss the Teknik Makina U34TM and suitable inserts Technical data Article number: U34TM Manufacturer: Teknik Makina Facts Diameter: 11 mm Overall length: 92 mm Cutting length: 33 mm Shank diameter: 16 mm Shank length: 45 mm Weight: 0.112 kg Special features Compatible inserts: XCGT 050204 Compatible insert manufacturer: Taegutec Product type: Indexable insert drill SKU: U34TM FAQ Which insert type fits this drill? The drill accepts the XCGT 050204 indexable insert; Teknik Makina specified this format for the U34TM to ensure straightforward replacements. What shank size is required for clamping? A 16 mm solid shank is provided on the U34TM, allowing secure clamping in standard 16 mm holders or suitable collet systems. What is the effective cutting length? The effective cutting length is 33 mm, which defines the working zone for repeatable hole production. Is the drill supplied with inserts? The product listing specifies compatibility with XCGT 050204 inserts; check the product offer for whether inserts are included or sold separately. Can the U34TM be used in automated tool changers? With a compact overall length of 92 mm and a standard 16 mm shank, the U34TM is suitable for many tool-changing systems; confirm holder compatibility for the specific machine interface. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise holemaking with the combination of an 11 mm cutting diameter and a 33 mm cutting length, plus secure Torx fastening for fast insert changes; the compatibility with XC-- 050204 indexable inserts and a compact 92 mm overall length supports stable setups and efficient machining. Order the tool via Metav Werkzeuge or contact their consultants for application advice. 11 mm solid drill body U15TM — compatible with XC-- 050204 indexable inserts, L92 mm (Teknik Makina) 11 mm solid drill body U15TM for precision drilling with indexable inserts in milling and turning operations 11 mm cutting diameter Compatible with XC-- 050204 indexable inserts Overall length 92 mm Torx T6 fastening, M2x4.2 screw Precision drilling for consistent hole quality and predictable cycle times The 11 mm drill body is engineered as an indexable-insert solution that turns insert changes into a fast, reproducible routine. With a 33 mm cutting length and 92 mm overall length, the design provides a stable tool projection that reduces vibration and helps maintain concentricity in serial production. Using indexable inserts instead of solid carbide tips simplifies reconditioning: worn edges are replaced rather than the entire tool, saving time and lowering lifecycle costs while preserving process stability. Fast insert changes and secure clamping for reduced downtime Insert retention is handled with a Torx T6 screw (specification M2x4.2) to ensure consistent clamp torque and repeatable seating of each XC-- 050204 insert. The mechanical simplicity of this fastening system supports a quick replacement routine and reduces the chance of incorrectly torqued screws, which improves uptime. For workshops aiming to increase throughput, the combination of tried-and-tested fastening and straightforward geometry translates into measurable reductions in incidental stops for tooling maintenance. Practical workshop advantages: compatibility, handling and stock rationalisation Designed by Teknik Makina and supplied as SKU U15TM, this solid drill body fits holders and tool systems with a 16 mm interface and a 45 mm tool-holder engagement, enabling straightforward integration into existing setups. The modest weight of 0.112 kg makes handling and tool changes ergonomic, while compatibility with Taegutec-produced inserts widens sourcing options. For procurement, the clear specification reduces ambiguity at the point of order and helps consolidate tooling variants across jobs, simplifying inventory management and ensuring readiness for repeat production runs. For direct supply, delivery questions or technical suitability checks for the Teknik Makina U15TM solid drill body, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss machine compatibility and stock availability. Technical data SKU: U15TM Item label: 11 mm solid drill body for XC-- 050204, L 92 mm Manufacturer: Teknik Makina Dimensions & weight Diameter: 11 mm Overall length: 92 mm Cutting length: 33 mm Shank diameter: 16 mm Holder engagement length: 45 mm Weight: 0.112 kg Compatibility & fastening Compatible with XC-- 050204 indexable inserts Suitable for Taegutec inserts Fastening: Torx T6 Screw: M2x4.2 FAQ Which inserts fit this drill body? The drill body accepts XC-- 050204 indexable inserts; Taegutec-manufactured inserts in that designation are compatible with the Teknik Makina U15TM and provide standardised seating and cutting geometry. What is the effective cutting depth of the tool? The effective cutting length is 33 mm, which defines the maximum depth of cut that can be achieved with the U15TM before the non-cutting shank engages. What machine interfaces are required for installation? The tool requires a holder or chuck accepting a 16 mm shank diameter with at least 45 mm engagement; installation into suitably rated milling or turning toolholders is recommended for safe operation. How are inserts secured and replaced? Inserts are secured with a Torx T6 screw (specification M2x4.2), allowing torque-controlled fastening to achieve repeatable clamping during insert changes. What is the SKU and mass of the tool for logistics planning? The product is listed as SKU U15TM and has a mass of 0.112 kg, useful for packing and storage calculations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise drive engagement and predictable seating provided by the Torx screw TC068TM; its Torx T15 drive and M3.5 thread ensure secure fastening and consistent assembly results. Order the fastener directly via Metav Werkzeuge or consult the Metav advisors for technical clarification. Torx screw TC068TM — M3.5 × 11 mm Torx fastener by Teknik Makina The Torx screw TC068TM is a compact fastener for fine mechanical assemblies and light engineering work, designed for reliable torque transfer where controlled clamping and repeatable seating are essential. Torx T15 drive for secure engagement M3.5 thread for fine assemblies 11 mm length with 5.3 mm diameter 60° head angle for reliable seating Reliable torque transfer for precise assemblies The Torx T15 star profile delivers controlled torque transmission and minimises cam‑out risk, which helps maintain screw integrity and reduces the need for rework. Combined with the M3.5 thread and a nominal 11 mm length, this fastener provides predictable clamp force in small assemblies. The specified 5.3 mm diameter and 60° head angle support consistent seating in pre‑prepared holes or countersunk features, making the component suitable for repeatable production tasks where accuracy matters. Compatibility that keeps production moving Designed to operate with standard Torx tooling, the fastener supports efficient manual or semi‑automated fitting processes. The standardised drive and metric thread simplify tool selection and inventory management, reducing downtime between operations. With a listed unit weight of 0.1 kg, handling and storage planning can be integrated into workshop logistics. The dimensional clarity of this component aids quality assurance checks and helps maintain throughput in small‑part assembly lines. Procurement clarity and documentation for workshop use Clear identification by SKU and measurable specifications streamlines procurement and traceability: the item can be referenced directly in bills of materials and maintenance records. The compact geometry and defined head angle make it easy to specify for engineers and buyers when updating assembly drawings or ordering replacement parts. For organisations seeking reliable repeatability from a recognised supplier, this fastener fits standard workshop and light industrial requirements and is accompanied by the technical data needed for process documentation. Secure consistent assembly results with Teknik Makina fasteners — order TC068TM through Metav Werkzeuge for dependable supply and further specification support from Metav Werkzeuge in Emmerich (info@metav-werkzeuge.com, +49 2822 7131930) Technical Data SKU: TC068TM Product name: Torx screw TC068TM Manufacturer: Teknik Makina eClass: 21189290 Facts Thread: M3.5 Overall length: 11 mm Diameter: 5.3 mm Head angle: 60° Weight: 0.1 kg Special features Torx T15 drive compatibility Fine thread for small assemblies Compact 11 mm length Suitable for precision workshop use FAQ What torque tools are compatible with this fastener? The Torx screw TC068TM is compatible with standard Torx T15 drivers and bits designed for small assembly operations. Is the thread size standard metric? Yes, the fastener features an M3.5 metric thread suitable for fine threaded applications. Which applications are typical for this type of screw? This type of fastener is commonly used in light engineering, instrument assemblies and other small‑part mechanical joins where controlled clamping is required. How is the component identified when ordering? Order by SKU TC068TM and specify the Torx screw TC068TM with M3.5 × 11 mm dimensions for unambiguous procurement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Secure assemblies benefit from the combination of a Torx T15 drive and an M4 thread, together with a compact 11 mm overall length for space-conscious installations. For seamless procurement or specification advice, order via Metav Werkzeuge or consult our product specialists. Torx screw — M4 thread, Torx T15 drive (Teknik Makina) Torx screw engineered for reliable fastening in workshop and industrial applications, featuring an M4 metric thread and a Torx T15 drive for consistent torque transfer M4 metric thread for standard fittings 11 mm overall length for compact assemblies Torx T15 drive for secure torque transfer 7 mm head diameter for firm seating Consistent torque and reduced cam‑out for reliable joints The fastener is built around a Torx T15 drive to ensure controlled torque application and to reduce cam‑out compared with slotted or Phillips heads. This geometry transfers force more efficiently to the screw shank, lowering the risk of driver slippage and damage to mating components. The M4 thread offers compatibility with common metric inserts and tapped holes, enabling repeatable clamping forces in production or maintenance tasks while preserving thread integrity over multiple service cycles. Compact dimensions for tight assemblies and neat finishes With an 11 mm overall length and a 7 mm head diameter, this screw suits confined spaces where a secure connection must not intrude on surrounding components. The specified 60° angle contributes to predictable seating behaviour and consistent contact with mating surfaces, which helps maintain alignment in assemblies with shallow countersinks. The compact form factor supports neat, professional finishes in panels, enclosures and small assemblies without sacrificing holding strength. Workshop compatibility and supply stability for production use Designed for efficient workshop workflows, the screw accepts a Torx key T15 as the drive tool and integrates easily into assembly processes that favour Torx interfaces. The part is produced by Teknik Makina and listed under SKU TC075TM, making it straightforward to specify on procurement documents. Sourcing via an established distributor avoids supply interruptions: pairing robust component design with dependable logistics supports uninterrupted production and reduces rework risk. For tailored advice on integrating the Teknik Makina Torx screw TC075TM into production or maintenance routines, contact Metav Werkzeuge in Emmerich—technical specialists are available by email or phone to support specification and delivery. Technical data Article number: TC075TM Manufacturer: Teknik Makina EClass: 21189290 Drive type: Torx T15 Facts Weight: 0.1 kg Diameter: 7 mm Thread: M4 Length: 11 mm Head angle: 60° Special features Drive tool: Torx key T15 Compact head for tight spaces Metric thread for standard fittings Manufacturer SKU: TC075TM FAQ What drive tool is required for this screw? The Torx screw uses a Torx T15 drive; the supplied specification for TC075TM calls for a T15 Torx key for torque application. What are the thread and length specifications? This fastener is supplied with an M4 metric thread and an overall length of 11 mm; head diameter is 7 mm with a 60° head angle. Is this component suitable for compact assemblies? Yes, the combination of an 11 mm overall length and a 7 mm head diameter makes this screw suitable for confined spaces and shallow countersinks. Who manufactures this screw and how is it identified? The screw is manufactured by Teknik Makina and is identified as TC075TM in technical documentation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact three-piece set that combines left-hand cutting capability with an option for internal coolant, delivering consistent chip control and fast tool changes for small-batch and precision turning operations. Order the set directly via Metav Werkzeuge or consult our specialists for specification matching and delivery from Emmerich. Boring bar set IPS25TM – left-hand cutting, coolant option (Teknik Cutting Tools) The Boring bar set IPS25TM is a compact tooling kit for precision turning and internal boring, suitable for indexable inserts and adaptable to operations with or without internal coolant. Left-hand cutting direction Option with or without coolant Set of three holders with included screws Includes Torx keys T8 and T15 Improved process control with left-hand cutting and coolant The combination of a dedicated left-hand cutting design and the option for internal coolant supports stable chip evacuation and thermal management in constrained bores. Left-hand geometry reduces tendency for chatter in specific spindle orientations, while coolant routing maintains cutting edge life and consistent surface finish. For shops seeking reliable repeatability, this configuration reduces rework and shortens cycle times without complex set-up procedures. Fast changeovers and compatibility with common inserts Packed as a three-piece set, the kit contains the holders S10J SDQCL 07, S12K SDQCL 07 and S16M SDQCL 07, together with the required screws and Torx keys. The tooling is prepared for indexable inserts of type DC--0702 and DC--11T3, enabling quick insert changes and broad application across medium-precision turning tasks. Included Torx keys (T8 and T15) and screws (M2.5×5.5 and M3.5×8.5) minimise downtime during maintenance and setup. Compact design for workshop efficiency and reliable handling Weighing only 0.442 kg for the complete set, the solution is easy to handle and store, making it suitable for both workbench use and mobile tool carts. The compact footprint supports flexible fixturing and reduces tooling inventory complexity when paired with standard holders. For production environments that prioritise throughput and predictability, the balanced specification of this tooling set supports consistent results across small to medium series runs. For precise left-hand machining with the coolant option, contact Metav Werkzeuge for tailored advice and to order the Teknik Cutting Tools IPS25TM set directly from our Emmerich warehouse. Technical data Article number: IPS25TM GTIN: 4061905100123 Weight: 0.442 kg Core data Pieces per set: 3 Cutting direction: left Set contents: S10J SDQCL 07; S12K SDQCL 07; S16M SDQCL 07 Special features For indexable inserts: DC--0702 and DC--11T3 Coolant option: with or without coolant Torx keys included: T8 and T15 Torx screws included: M2.5×5.5 and M3.5×8.5 FAQ What exactly is included in the set? The set contains three holders (S10J SDQCL 07, S12K SDQCL 07, S16M SDQCL 07), Torx keys T8 and T15, and the matching screws M2.5×5.5 and M3.5×8.5 for assembly. Which inserts can be used with this tooling? This tooling is designed for indexable inserts compatible with DC--0702 and DC--11T3 types, enabling flexible insert choices for various materials. Is internal coolant supplied or optional? The kit is available with or without internal coolant; the listing indicates the option "with or without coolant" so selection can be made according to machining requirements. Can the set handle common workshop turning tasks? Yes, the compact three-piece configuration and compatibility with standard indexable inserts make the set suitable for a wide range of small to medium turning and boring tasks. What is the cutting direction and how does it affect use? The tooling is configured for left-hand cutting; this influences chip flow and is beneficial in specific spindle orientations or when left-hand tool geometry is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, coolant-fed design and precise compatibility with DCMT 0702 indexable inserts for stable, accurate bore finishing; order directly via Metav Werkzeuge or contact our consultants for application advice. Boring bar A08-10H — 12.5 mm diameter, internal coolant (Teknik Makina) The Boring bar A08-10H is a compact, coolant-fed tool for internal turning and finishing with DCMT 0702 indexable inserts, suited to precise, small-bore machining tasks 12.5 mm outer diameter for tight bores Internal coolant channel to the cutting edge Right-hand cutting orientation for standard setups Compatible with DCMT 0702 indexable inserts Stable bore finishes from a compact design The A08-10H is engineered for stability in confined machining envelopes: a 12.5 mm outer diameter coupled with a 10 mm shank reduces overhang while maintaining the stiffness required for accurate internal turning. The shortened overall length and compact head geometry lower vibration tendency, which in turn improves surface quality and repeatability. For workshops aiming to reduce rework and increase first-pass yield, this configuration delivers a tangible improvement in process reliability. Coolant-fed cutting for better tool life and chip control An integrated internal coolant channel directs lubricant and coolant straight to the cutting zone, promoting efficient chip evacuation and heat control at the edge. This targeted coolant supply reduces thermal loading on the insert and helps maintain cutting-edge geometry for longer, which decreases indexable insert changes and downtime. In practical terms, the coolant-fed design supports consistent cycle times and extends consumable life in demanding production runs. Practical handling and proven compatibility Assembly and maintenance are straightforward thanks to the supplied Torx interface: M2.5x5.5 Torx screw secured with a T8 key enables quick insert clamping and replacement. The tool’s 6.4 mm clamping-head width and 22 mm cutting height match the geometry expectations of DCMT 0702 inserts, ensuring secure seating and correct cutting engagement. The right-hand cutting direction and 95° cutting angle are suitable for standard lathe setups, while the low mass of the bar supports fast acceleration and precise positioning in automated tool changers. Contact Metav Werkzeuge for delivery and technical matching of the Teknik Makina A08-10H boring bar from our Emmerich warehouse Technical data SKU: KA512TM Designation: A08-10H Product type: Boring bar Brand: Teknik Makina For inserts: DCMT 0702 Internal coolant: yes Facts Diameter: 12.5 mm Shank diameter: 10 mm Overall length: 100 mm Cutting height: 22 mm Clamping head width: 6.4 mm Weight: 0.052 kg Cutting direction: right Cutting angle: 95° Torx key: T8 Torx screw: M2.5x5.5 Features ISO designation: A08-10H Product label: 12,5mm Bohrstange DCMT 0702 L100mm mit Innenkühlung Category path: Zerspanen › Bohrstangen Lightweight design for reduced spindle load Compatibility with common DCMT indexable inserts FAQ Which inserts fit this boring bar? The boring bar is designed for DCMT 0702 indexable inserts, ensuring correct seating and cutting geometry for that insert family. Does the bar provide coolant to the insert tip? Yes, the tool features internal coolant that delivers fluid directly to the cutting zone to assist chip evacuation and edge cooling. Is this tool suitable for right-hand turning only? The bar is configured for right-hand cutting and is intended for standard right-hand lathe operations. What fastening hardware is required for insert changes? Insert clamping uses a M2.5x5.5 Torx screw tightened with a T8 key for secure and fast insert replacement. What are the key dimensions to check for machine compatibility? Important dimensions include 12.5 mm outer diameter, 10 mm shank, 100 mm overall length and 22 mm cutting height; these determine clearance and clamping requirements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact solution that combines precision alignment, internal coolant delivery and straightforward insert compatibility to maintain stable chip evacuation and repeatable results on short to medium-length bores. Order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. KA516TM Boring Bar for DCMT 0702 Indexable Inserts — 12.5 mm, Internal Coolant (Teknik Makina) The KA516TM is a 12.5 mm boring bar designed for turning operations with DCMT 0702 indexable inserts; it delivers internal cooling and a robust left-hand cutting geometry for stable metal removal. Internal coolant channel for stable cooling 12.5 mm shank diameter for compact setups Compatible with DCMT 0702 indexable inserts Left-hand cutting, 95° cutting angle Accurate coolant-assisted metal removal for repeatable bores The combination of an internal coolant channel and a compact geometry ensures consistent chip evacuation and tool life in demanding turning tasks. By feeding coolant directly to the cutting edge, heat is reduced locally and built-up edge is minimised, which promotes dimensional stability and surface quality. The left-hand cutting orientation and the 95° cutting angle support snug approach angles in confined bores, reducing vibration and improving centring. These technical properties translate into fewer rejected parts and lower rework rates for precision workshops. Fast set-up and secure insert clamping for efficient throughput Compatibility with DCMT 0702 indexable inserts simplifies inventory management and shortens changeover times. The bar’s 10 mm shank and a 6.4 mm clamp-head width provide a compact interface that fits tight toolposts and turret stations. A Torx T8 interface and M2.5x5.5 fixing screw enable reliable insert retention while allowing quick index or replacement procedures. Together, these aspects reduce downtime during batch changes and help maintain a controlled production pace with predictable results. Robust construction geared to everyday workshop use With an overall length of 100 mm and a low mass of 0.052 kg, this boring solution is optimised for stability without unnecessary overhang. The 12.5 mm diameter and 22 mm cutting height offer sufficient engagement for many common turning tasks while keeping deflection minimal. The compact nature of the tool makes it well suited to small-batch production and repair work where access is restricted. For operations requiring guidance on speeds, feeds or insert grade selection, Metav’s technical advisors can provide application-tailored recommendations to extend tool life and reduce operating costs. For straightforward integration into existing turning programmes, contact Metav Werkzeuge to discuss the Teknik Makina KA516TM and its suitability for specific materials and insert grades; reach out by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: KA516TM Designation: A08-10H Product type: Boring bar Manufacturer: Teknik Makina Facts Diameter: 12.5 mm Overall length: 100 mm Shank diameter: 10 mm Cutting height: 22 mm Clamp-head width: 6.4 mm Weight: 0.052 kg Cutting angle: 95° Special features Internal coolant channel For DCMT 0702 indexable inserts Left-hand cutting orientation Torx key T8 Torx screw M2.5x5.5 FAQ Is the coolant supplied through the bar? Yes. The KA516TM boring bar features an internal coolant channel that delivers fluid directly to the cutting zone to reduce heat and aid chip removal. Which inserts fit this tool? The bar is designed for DCMT 0702 indexable inserts; this compatibility simplifies insert sourcing and inventory for turning applications. What is the shank diameter and overall length? The tool has a 12.5 mm nominal diameter with a 10 mm shank diameter and an overall length of 100 mm, suitable for compact setups and limited overhang. Is the tool suitable for confined or hard-to-reach bores? Yes. Its compact design, combined with a left-hand cutting geometry and a 95° cutting angle, makes it appropriate for restricted access bores where stability is paramount. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precision-focussed design that combines a slim 10 mm shank, a 125 mm overall length and a controlled max parting depth of 2 mm for reliable, repeatable grooving and parting operations. Order the parting clamp holder directly via Metav Werkzeuge or ask the consultants for tailored advice. Parting clamp holder K831TM — 12.5 mm, compact 125 mm length (Teknik Makina) A robust parting clamp holder K831TM engineered for precise grooving and cut‑off tasks in CNC turning, featuring a standard 10 mm shank and a short overall length for restricted toolpost spaces. 12.5 mm cutting diameter compatibility 125 mm overall length for compact setups 10 mm shank for standard toolholders Max parting depth 2 mm with T7 Torx screw Consistent, shop‑floor precision for tight spaces Designed for repeated, dependable parting and grooving cycles, this toolholder delivers consistent results where accessibility is limited. The short 125 mm overall length reduces overhang and helps maintain rigidity, which translates into improved surface finish and reduced tool chatter. The compact design pairs with a 10 mm shank, permitting secure clamping in commonly used toolposts and quick change systems; this ensures minimal set‑up time and steady process control for batch and single‑piece production alike. Efficient material removal with controlled depth and width With a maximum parting depth of 2 mm and a 6.8 mm cutting head width, the holder is tailored for fine, accurate cut‑off operations rather than heavy roughing; this reduces spindle load and extends insert life in finish or semi‑finish passes. The 25 mm cutting height allows correct insert positioning and stable engagement, so the toolholder supports predictable chip formation and easier downstream inspection. For workshops seeking reliable, low‑vibration performance, the geometry focuses on repeatability and economical tool consumption. Practical fastening and straightforward maintenance The clamping system uses a Torx T7 interface and an M2.2x6 fastening screw to secure the insert clamp, providing a compact, low‑profile connection that is simple to access with standard Torx tools. The arrangement simplifies insert changes and maintenance, reducing downtime during shift changes or tool swaps. At a weight of approximately 0.74 kg, the holder balances robustness and manoeuvrability, enabling technicians to handle and position the assembly easily without excessive strain. For expert advice on integrating the Teknik Cutting Tools parting clamp holder K831TM into existing tooling stations, contact Metav Werkzeuge for fast, reliable support and procurement at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: K831TM Product type: Parting clamp holder Brand: Teknik Makina Label: 12,5mm Stechklemmhalter L125mm ECLASS: 21181005 Core specifications Overall length: 125 mm Shank diameter: 10 mm Cutting height: 25 mm Cutting head width: 6.8 mm Compatible cutting diameter: 12.5 mm Max parting depth: 2 mm Weight: 0.74 kg Features and fastening Torx key type: T7 Torx screw: M2.2x6 ISO shank designation: S10K SKU identifier: K831TM FAQ What is the shank size and how does it fit standard toolposts? The holder uses a 10 mm shank diameter, and the parting clamp holder K831TM is designed to clamp securely in standard 10 mm toolposts and quick‑change adaptors. What maximum parting depth can be achieved with this toolholder? The maximum recommended parting depth is 2 mm, enabling the K831TM to perform precise cut‑off and finish grooving operations with stable engagement. Which fasteners are used to secure the clamp and insert? Fastening is by a Torx T7 interface and an M2.2x6 screw; the parting clamp holder K831TM uses this compact fastening to allow quick, accessible insert changes. What overall length should be expected and why does it matter? The overall length is 125 mm; this compact dimension reduces overhang, improving rigidity and repeatability for the K831TM in constrained turret or toolpost arrangements. Is the toolholder suitable for heavy roughing cuts? The geometry and 6.8 mm cutting head width are optimised for precise parting and finishing operations rather than heavy stock removal; the K831TM is best used for controlled, repeatable cuts rather than aggressive roughing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact 100 mm overall length with a 12.5 mm nominal diameter that ensures repeatable internal bores, together with compatibility for DCMT 0702 indexable inserts and a sturdy 10 mm shank for stable seating. Order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. Boring Bar S08-10K (K297TM) – 12.5 mm for DCMT 0702 inserts by Teknik Makina A boring bar designed for use with DCMT 0702 indexable inserts, providing a compact, rigid solution for precision internal turning with right-hand cutting. Compatible with DCMT 0702 indexable inserts 12.5 mm nominal diameter for precise bores 100 mm overall length, 10 mm shaft diameter Right-hand cutting with 95° cutting angle Stable, repeatable internal turning for series production This tool delivers consistent results by combining a 12.5 mm nominal diameter with a 10 mm shaft, reducing deflection during internal turning and improving concentricity on consecutive parts. The compatibility with DCMT 0702 indexable inserts means users can select proven carbide grades and geometries for the application at hand; indexable inserts allow rapid re-indexing or replacement, which reduces downtime compared to regrinding. For those evaluating tooling systems, the compact configuration supports high-precision bores in small to medium diameters while keeping setup straightforward. Secure clamping and defined cutting geometry for process reliability A firm seating and correct clamp dimensions are key to machining stability. The bar’s 100 mm overall length and clamp-related width of 6.4 mm provide a short overhang and a rigid toolholding arrangement, while the 22 mm cutting height secures the insert position for repeatable engagement. The 95° cutting angle combined with right-hand cutting promotes controlled chip flow and consistent surface finish when paired with the appropriate DCMT insert geometry. Fastener specification is clear: the insert is retained with an M2.5x5.5 Torx screw operated with a T8 Torx key, enabling quick, toolroom-standard index changes. Compact handling, clear identification and workshop integration Weighing approximately 0.052 kg and carrying the identifier K297TM, the bar is easy to handle during tool setup and convenient to store in modular tool racks. The compact geometry suits automated and manual setups where short tooling length improves rigidity. As a product from Teknik Makina, the tool integrates into common turning centres and bar-feed applications that accept DCMT 0702 inserts; labelling and standardised fixings simplify inventory management and reordering for production continuity. For reliable compatibility with DCMT 0702 inserts and quick integration into existing turning processes, contact Metav Werkzeuge to discuss the Teknik Makina boring bar K297TM and arrange supply from our Emmerich warehouse. Technical data SKU: K297TM Model: S08-10K Product type: Boring bar Manufacturer: Teknik Makina Core dimensions Nominal diameter: 12.5 mm Overall length: 100 mm Shaft diameter: 10 mm Cutting height: 22 mm Clamp holder width: 6.4 mm Cutting angle: 95° Cutting direction: right Fastener: M2.5x5.5 Torx screw Torx key: T8 Weight: 0.052 kg Features & compatibility For DCMT 0702 indexable inserts Right-hand cutting configuration Compact, short-overhang design Standard Torx screw retention Suitable for internal turning applications FAQ Which inserts fit this boring bar? The boring bar accepts DCMT 0702 indexable inserts; this configuration is specified for the S08-10K (SKU K297TM) from Teknik Makina to ensure correct seating and cutting geometry. Is the cutting direction right-hand or left-hand? This tool is configured for right-hand cutting, and the 95° cutting angle is optimised for standard right-handed internal turning operations. What are the key dimensions to check before ordering? Check the 12.5 mm nominal diameter, 100 mm overall length and 10 mm shaft diameter to ensure compatibility with the machine spindle and toolholder layout; these dimensions are noted for the K297TM boring bar. Which fastener and key are required for the insert? The insert is secured with an M2.5x5.5 Torx screw operated by a T8 Torx key, matching common workshop tooling standards for quick insert changes. Is this bar suitable for automated bar-feed or tool turret mounting? The compact design and short overhang of the S08-10K make it suitable for both turret-mounted and certain bar-feed installations where the machine’s toolholding accepts the stated shaft diameter and length. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precision-engineered clamp that combines secure clamping, compatibility with standard ISO shanks, and compact dimensions for efficient parting operations; order the holder directly via Metav Werkzeuge or consult our technical team for application advice. Parting clamp holder K831-1TM — 12.5 mm diameter, 125 mm length (Teknik Makina) A Parting clamp holder K831-1TM designed for secure parting and grooving tasks on CNC lathes and turning centres, offering precise clamping for narrow-groove applications in workshop and production environments. High clamping stability with Torx T7 screw 12.5 mm diameter for narrow groove operations 125 mm overall length for deep setups Compatible with S10K ISO shank Precision and compatibility for controlled parting The K831-1TM is a compact parting clamp holder engineered for reliable, repeatable clamping in turning operations. With a diameter of 12.5 mm and an overall length of 125 mm, the holder is tailored for installations where space is limited but process control is essential. The shaft Ø 10 mm ensures compatibility with standard tool posts and adaptors, while the ISO designation S10K indicates straightforward interchangeability with common boring-bar and holder systems. These attributes reduce set-up time and simplify inventory, delivering measurable gains in process efficiency. Secure clamping and improved surface results Clamping integrity is central to consistent results; this holder uses a Torx-driven fastening system ( Torx T7 ) with an M2.2x6 screw, delivering firm seat and reduced micro-movement during cutting. The combination of cutting height 25 mm and cutting head width 6.8 mm supports stable engagement of the cutting insert, while the max parting depth 2 mm defines safe operational limits for narrow-groove procedures. Reduced vibration from a stable clamping arrangement improves surface finish and prolongs insert life, translating into lower tooling costs and fewer reworks for production-critical batches. Practical handling and workshop advantages Weighing 0.75 kg, the holder is robust yet easy to handle during tool changes and set-up. The design keeps maintenance straightforward: standard tool keys (Torx T7) and a single screw fixation simplify insert seating and replacement. For workshops aiming to standardise tooling across multiple lathes, the S10K compatibility and compact form factor make the holder suitable for small-batch work, repair tasks and continuous production alike. The construction prioritises repeatability and ease of alignment so that cycle times remain predictable and tool performance stable across shifts. For reliable parting and grooving solutions from Teknik Makina, contact Metav Werkzeuge for ordering and tailored setup advice — call +49 2822 7131930 or eMail info@metav-werkzeuge.com for fast technical guidance and supply from our Emmerich hub. Technical data Article number: K831-1TM Product type: Parting clamp holder Manufacturer: Teknik Makina ECLASS: 21181005 UID: K831-1TM Facts Diameter: 12.5 mm Overall length: 125 mm Shaft diameter: 10 mm Cutting height: 25 mm Cutting head width: 6.8 mm Max parting depth: 2 mm Weight: 0.75 kg Special features ISO shank designation: S10K Torx key: T7 Torx screw: M2.2x6 Label: 12.5 mm parting clamp holder L125 mm SKU: K831-1TM FAQ What machines are suitable for this holder? The K831-1TM parting clamp holder is suitable for CNC lathes and turning centres where a 12.5 mm diameter tool and shaft Ø 10 mm interface are compatible; use with standard tool posts and adaptors that accept S10K-style shanks. Which insert sizes and cutting depths are appropriate? The holder supports a cutting head width of 6.8 mm and a cutting height of 25 mm, with a recommended max parting depth of 2 mm; these limits help ensure secure clamping and reliable cutting performance. How is the clamping secured? Clamping is achieved with a Torx-driven fixation using a Torx T7 key and an M2.2x6 screw, providing firm seating to minimise micro-movement and vibration during parting operations. Is the holder suitable for high-speed parting? The design focuses on stability and repeatability; compatibility with S10K shank standards allows integration into typical production setups where speed is governed by the selected insert and machine capability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of compatibility, compact dimensions and straightforward maintenance for dependable CNC drilling cycles; the compatibility with SPMG 0502 indexable inserts and the compact Ø12.5 mm cutting diameter ensure repeatable results and cost-efficient insert replacement. Order the tool directly via Metav Werkzeuge or consult our team for technical guidance. Insert Drill U812TM – indexable insert drill, Ø12.5 mm, for SPMG 0502 (Teknik Makina) Insert Drill U812TM is a precision drill body designed for indexable SPMG 0502 inserts, intended for workshop and production environments where fast insert changes and reproducible hole quality are required Compatible with SPMG 0502 indexable inserts Suitable for Taegutec and YG-1 inserts Ø12.5 mm drill body with 38 mm cutting length 20 mm shank with 50 mm shank length Consistent hole quality through an indexable insert system The indexable insert concept used by this drill body separates the cutting edge from the toolholder, so wear is addressed by changing small inserts rather than replacing the whole tool. That approach reduces tooling costs and downtime while maintaining repeatable hole quality. With a Ø12.5 mm nominal diameter and a 38 mm cutting length, the design supports consistent chip control and dimensional stability across batch runs, making it suitable for serial production and workshop jobs that demand uniform results. Stable clamping and reduced runout for reliable machining A solid 20 mm shank and a shank length of 50 mm give the tool secure clamping in standard toolholders, improving rigidity and reducing runout. The resulting stability translates into improved surface finish and longer insert life, since the insert experiences lower deflection during cutting. The overall length of 106 mm and a tool weight of 0.158 kg contribute to manageable tool dynamics on milling heads and drilling spindles, ensuring the holder performs predictably in typical CNC setups. Flexible inventory and fast service life management Compatibility with well-known insert manufacturers such as Taegutec and YG-1 simplifies procurement and keeps spare-part stocks compact. Using SPMG 0502 inserts means cutting edges can be rotated or replaced quickly, shortening maintenance intervals and improving machine uptime. The modular nature of the drill body supports cost-effective tooling strategies: invest in robust holders and replenish low-cost inserts as required, which is especially advantageous for shops balancing quality and budget. Applications and operational fit The tool is engineered for environments that favour indexable insert drilling—job shops, subcontractors and production lines where predictable tool behaviour and straightforward insert changes are priorities. The holder's dimensions and compatibility profile permit integration into standard CNC tool magazines and manual drill setups that accept a 20 mm shank. For customers requiring tailored advice on integration or process parameters, technical specification matching can be provided to ensure optimal cutting conditions. For precision drilling and tooling advice on the Teknik Makina U812TM insert drill, contact Metav Werkzeuge for personalised recommendations and fast supply from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U812TM Manufacturer: Teknik Makina Diameter: 12.5 mm Cutting length: 38 mm Shank diameter: 20 mm Shank length: 50 mm Overall length: 106 mm Weight: 0.158 kg For indexable inserts: SPMG 0502 Compatible insert manufacturers: Taegutec, YG-1 Product type: Insert drill body FAQ Which inserts fit this insert drill? The insert drill U812TM accepts SPMG 0502 indexable inserts; it is compatible with inserts from Taegutec and YG-1 for straightforward replacement. What are the key dimensions to check when mounting the tool? Check the 20 mm shank and 50 mm shank length for holder compatibility, and confirm the 106 mm overall length fits the machine setup before use. Can the drill body be used in automatic tool changers? Yes, the geometry with a 20 mm shank and standard overall length is suitable for most CNC tool magazines when clamping and HSK/BT interfaces are compatible. How does insert replacement affect production uptime? Using indexable SPMG 0502 inserts reduces downtime: worn edges are rotated or replaced quickly, so the Teknik Makina U812TM holder remains in service while inserts are serviced. Is the U812TM suitable for small-batch production? The holder's flexibility and low-cost insert changes make the U812TM a practical choice for small-batch and mixed-production environments where quick tool changeovers are beneficial. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High rigidity from the 40 mm shank combined with compatibility for CCMT 1204 indexable inserts ensures stable internal boring across the 120–170 mm diameter range, delivering consistent surface finish and longer insert life; order directly via Metav Werkzeuge or contact the technical consultants for application advice. Teknik Makina Boring Bar for CCMT 1204 Indexable Inserts — 40 mm shank, 120–170 mm range Teknik Makina Boring Bar for CCMT 1204 Indexable Inserts is a compact, heavy‑duty holder designed for precision internal boring with CCMT 1204 carbide inserts, suited to medium and large bore operations. Compatible with CCMT 1204 indexable inserts Diameter range 120–170 mm 40 mm shank for high rigidity Robust 3.281 kg construction Greater repeatability through proven clamping and insert compatibility The holder supports CCMT 1204 indexable inserts and uses a standard T20 Torx key with an M5x12 clamping screw for secure seating and fast insert changes. This configuration reduces set‑up time and minimises run‑out variation, which translates into consistent bore tolerances and fewer rejected parts. The simple, widely used screw and key sizes mean replacement components are easy to source and maintenance can be carried out with standard workshop tools. Reduced vibration and improved surface finish from a rigid tool body A 40 mm shank and a 139 mm overall length create a stiff assembly that resists deflection during heavy cuts. The tool’s mass — 3.281 kg — contributes to damping cutting forces, stabilising the cutting zone and extending insert life. For operations where surface integrity matters, this rigidity delivers measurable improvements, such as reduced need for rework and more predictable tool life, benefiting both batch production and one‑off precision tasks. Wide bore capability and practical workshop advantages Engineered for a diameter range of 120–170 mm, the holder is suitable for a variety of internal boring tasks in medium to large components. The design enables quick insert indexing and repeatable seating, supporting efficient changeovers and shorter cycle times. Backed by Teknik Makina manufacturing and supplied through Metav Werkzeuge, this solution pairs industrial quality with straightforward procurement and reliable European logistics, helping workshops maintain continuous production without complex sourcing overhead. Discuss specific bore requirements with Metav Werkzeuge — Technical data and application guidance are available from Metav Werkzeuge; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: TKB148TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina Product type: Boring bar / holder for indexable inserts Shank diameter: 40 mm Diameter range: 120–170 mm Overall length: 139 mm Weight: 3.281 kg Torx key: T20 Clamping screw: M5x12 For CCMT 1204 indexable inserts Robust construction for reduced vibration Fast insert change with standard Torx fastening Suitable for medium to large internal bores Supplied via Metav Werkzeuge FAQ What insert type does this holder accept? The holder accepts CCMT 1204 indexable inserts; it is specified as a boring bar for CCMT 1204 indexable inserts and is compatible with standard CCMT 1204 geometries. What is the shank diameter and why does it matter? The shank diameter is 40 mm; a larger shank increases rigidity, reduces deflection during cutting and improves surface finish in internal boring operations. Which diameters can be machined with this tool? This holder covers a 120–170 mm bore range, making it suitable for medium to large internal boring tasks where CCMT 1204 inserts are appropriate. What are the fastening details for the insert clamp? Insert clamping uses a T20 Torx key and an M5x12 screw, providing secure, repeatable clamping; replacement screws and keys follow common workshop standards. Who manufactures this holder and what is the SKU? The holder is manufactured by Teknik Makina and sold under SKU TKB148TM; it is distributed via Metav Werkzeuge for European customers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Robust finishing capability with a 40 mm shank and fine-machining accuracy to 0.01 mm ensures stable, repeatable bore results; compatible with CCMT 09T3 indexable inserts for fast insert changes and consistent surface quality. Order the boring tool directly via Metav Werkzeuge or ask our consultants if needed. Boring tool THB100TM — finishing for CCMT 09T3 indexable inserts (Teknik Makina) The boring tool THB100TM is a finishing internal boring bar designed for precision bore machining with CCMT 09T3 indexable inserts in industrial and workshop environments. Compatible with CCMT 09T3 inserts Fine finishing to 0.01 mm tolerance 40 mm shank for rigid mounting Diameter range 120–190 mm Consistent bore quality through controlled finishing The finishing bar is engineered to deliver consistent results when a high surface standard is required. By accepting the widely used CCMT 09T3 indexable inserts, the tool enables rapid insert replacement and predictable cutting geometry, which reduces scrap and rework. The specified 0.01 mm fine-machining capability refers to achievable dimensional stability in controlled conditions; this level of precision supports tight tolerance bores and improves first-pass yield. For operations where repeatability matters, the combination of stable clamping and known insert geometry provides a measurable productivity advantage. Secure clamping and setup for reliable cycle times A sturdy 40 mm shank affords the rigidity needed during finishing passes, reducing chatter and enabling higher feed stability. The overall length of 163.7 mm balances accessibility and stiffness for deep or semi-deep bores, while the tool mass of 5.06 kg contributes to vibration damping on heavier-duty machines. Insert retention is achieved with a Torx fastening system — Torx T15 key and M3.5x9 screw — providing repeatable, toolmaker-friendly clamping. These features accelerate set-up and lower the risk of insert movement during critical finishing cuts, shortening cycle times through reduced adjustments. Practical advantages for workshop and production use Designed for the finishing stage, the tool covers a bore range of 120–190 mm, making it suitable for medium‑sized internal diameters in components that require smooth internal surfaces. The modular nature of indexable inserts keeps long-term tooling costs manageable: only the insert needs replacing when wear occurs, not the entire bar. The product’s specification supports integration into both conventional and CNC turning centres used in metalworking shops. For specialist tasks, the tool’s straightforward geometry and standard fastenings simplify stockkeeping and maintenance, supporting a dependable supply chain when ordered from Metav Werkzeuge. For tailored advice or delivery from Emmerich, contact Metav Werkzeuge — our consultants can confirm suitability for specific machines and workpieces and arrange prompt supply of the Teknik Makina THB100TM. Technical data Article number: THB100TM Manufacturer: Teknik Makina SKU: THB100TM Data Diameter range: 120–190 mm Overall length: 163.7 mm Shank diameter: 40 mm Fine machining: 0.01 mm Weight: 5.06 kg Special features For CCMT 09T3 indexable inserts Torx T15 key; screw M3.5x9 Designed for finishing/bore machining FAQ Which insert type fits this boring tool? The boring tool THB100TM is designed for CCMT 09T3 indexable inserts and uses their standard clamping geometry to secure the cutting edge. What bore diameters can be machined with this bar? This finishing bar covers a diameter range of 120–190 mm, making it suitable for medium internal bores. What level of dimensional accuracy is achievable? Under controlled machining conditions the tool supports fine finishing down to approximately 0.01 mm, depending on machine rigidity and process parameters. How is the insert fastened to the tool? Insert retention uses a Torx system — Torx T15 key and M3.5x9 screw — ensuring repeatable and secure clamping for finishing passes. Is the tool suitable for CNC turning centres? Yes. The THB100TM is intended for industrial workshop use and integrates with conventional and CNC turning equipment for finishing operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of precision finishing, compatibility with CCMT 09T3 indexable inserts and a rigid 40 mm shank ensures consistent surface quality and reliable clamping for high‑accuracy internal turning tasks; order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. Precision boring bar THB110TM by Teknik Makina — for CCMT 09T3, 120 mm The THB110TM is a precision boring bar designed for fine finishing with CCMT 09T3 indexable inserts, engineered to deliver stable cuts and superior surface integrity in medium‑duty production environments. Fine finishing compatible with CCMT 09T3 120 mm nominal diameter for versatile use 40 mm shank diameter for rigid clamping Cutting height 93.7 mm for deeper finishing passes Enhanced surface quality for final passes A focus on repeatable surface finish makes this boring bar ideal where tolerance and appearance matter. By using CCMT 09T3 indexable inserts, the system promotes consistent cutting geometry and uniform chip formation, which reduces the need for subsequent polishing. The tool’s design supports fine finishing operations by maintaining axial and radial stability, thereby decreasing tool marks and lowering scrap rates. The cutting height of 93.7 mm allows controlled engagement for finishing depths common in component manufacture. Rigidity and stability that improve cycle reliability Rigidity is central to repeatable machining results. The 40 mm shank diameter offers secure clamping in standard toolholders, reducing vibration and chatter during finishing cuts. A stiffer tool interface directly contributes to improved dimensional consistency and longer insert life. With a nominal diameter of 120 mm and a maximum cutting diameter noted at 190 mm, the tool accommodates a range of internal diameters while retaining a stable cutting platform for precision operations. Tooling economy through standard insert compatibility Acceptance of CCMT 09T3 inserts means reduced inventory complexity and straightforward replacement cycles. Indexable inserts provide fast changeovers and predictable cutting behaviour, lowering downtime and enabling efficient tool management. The modular concept supports cost‑effective maintenance: worn inserts are replaced rather than the entire holder, improving overall shop economics. Teknik Makina’s holder geometry is optimised to exploit the insert’s rake and clearance for fine turning tasks. Practical integration into workshop workflows Installation and set‑up are straightforward in production layouts that already use standard insert systems. The bar’s dimensions and shank form ensure compatibility with common turret and toolpost arrangements, simplifying retrofitting. For complex specifications or process optimisation, technical consultation is available to align the toolholder with machining parameters and insert grades. Metav Werkzeuge can advise on insert selection and cutting data to match the desired finish and cycle time targets. For tailored advice on integrating Teknik Makina’s THB110TM into production or to secure immediate supply from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: THB110TM Manufacturer: Teknik Makina Product type: Boring bar for fine finishing Numbers Shank diameter: 40 mm Nominal diameter: 120 mm Max cutting diameter: 190 mm Cutting height: 93.7 mm eCl@ss: 21041590 Special features Compatible inserts: CCMT 09T3 Designed for fine finishing applications Label: 120mm Ausdrehwerkzeug für die Feinbearbeitung CCMT 09T3 SKU: THB110TM FAQ Which inserts are suitable for this toolholder? The THB110TM is designed for CCMT 09T3 indexable inserts, which provide the chip control and geometry suited to fine finishing operations. What shank size is required for secure clamping? A 40 mm shank diameter is specified for the holder to ensure rigid clamping in compatible toolholders. What diameters can be machined with this boring bar? The holder has a nominal diameter of 120 mm and supports a maximum cutting diameter of 190 mm, covering a broad range of internal turning dimensions. Is the THB110TM suitable for production environments? Yes, Teknik Makina’s THB110TM is engineered for repeatable fine finishing in production settings, offering indexable insert compatibility and a robust shank for stable cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, insert-based solution that combines precision and extended reach: the rigid tool body and compatibility with CCMT 1204 indexable inserts ensure steady bore quality and reduced downtime. For reliable procurement and advice, order the boring tool directly via Metav Werkzeuge or consult the Metav team for application support. Boring tool TKB159TM – 120 mm diameter, for CCMT 1204 indexable inserts (Teknik Makina) The boring tool TKB159TM is a purpose-built holder for CCMT 1204 indexable inserts, developed for internal turning and bore-finishing tasks in workshop and production settings. For CCMT 1204 indexable inserts 120 mm nominal diameter Overall length 208 mm Max cutting diameter 170 mm Consistent bore quality through stable design The holder’s construction prioritises stability to reduce vibration and tool deflection during internal machining, which translates into repeatable precision and improved surface finish. By using standard CCMT 1204 indexable inserts, the system separates cutting-edge wear from the tool body, enabling quick insert replacement and consistent dimensional results. This design philosophy limits scrap rates and supports predictable process capability in series production. Faster set-ups and longer productive cycles Compatibility with indexable inserts delivers a pragmatic productivity advantage: worn inserts are exchanged in moments, not hours, reducing machine idle time and lowering per-part tooling costs. The combination of a 120 mm nominal diameter and a 208 mm overall length gives sufficient reach for many internal operations while the 170 mm maximum cutting diameter provides margin for bore enlargement tasks. These measurable dimensions enable planners to match the tool to specific cycle-time and accessibility requirements, making production planning more efficient. Clear application scope and operational benefits Designed for conventional and CNC internal turning, the tool body supports routine bore finishing and enlargement tasks without complex tooling conversions. The use of indexable inserts ensures consistent cutting geometry and simplified inventory management: fewer complete tools are needed when inserts cover the wear items. As a result, workshop logistics benefit from reduced stock complexity and faster replenishment cycles, which bolsters overall throughput. Robust supply and workshop integration The straightforward insert interface and standardised geometry make integration into existing tool sets uncomplicated. The tool’s label and SKU facilitate ordering and traceability in procurement systems, supporting a controlled spare-part strategy and predictable lead times. When combined with disciplined insert-change procedures, the holder contributes to sustained machining quality and lower total cost of ownership over time. Contact Metav Werkzeuge today for tailored supply and technical advice on Teknik Makina’s TKB159TM boring tool and for assistance matching the tool to specific machining tasks. Technical data Article number: TKB159TM Label: 120mm Ausbohrwerkzeug CCMT 1204 L208mm Manufacturer: Teknik Makina ECLASS: 21181208 Product type: Boring tool Core dimensions Nominal diameter: 120 mm Max cutting diameter: 170 mm Overall length: 208 mm Features / Compatibility Compatible inserts: CCMT 1204 Category path: Zerspanen SKU: TKB159TM FAQ Which insert grade and size fits this holder? The holder uses CCMT 1204 indexable inserts; insert grade and geometry should be chosen according to the workpiece material and cutting conditions for the TKB159TM boring tool. What reach does the tool provide for internal operations? The tool offers an overall length of 208 mm, providing extended reach for many internal turning and bore-finishing applications while maintaining rigidity. What is the maximum cutting diameter achievable with this tool? The tool supports a maximum cutting diameter of 170 mm, allowing for bore enlargement tasks within that envelope. Is the tool suitable for CNC and manual lathes? Yes, the design of the holder is appropriate for both CNC and conventional lathe applications where CCMT 1204 inserts are used and the dimensional envelope fits the machine setup. How does the insert system affect workshop logistics? Using indexable CCMT 1204 inserts reduces the need for multiple dedicated cutters, simplifies spare-part management and shortens downtime during insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, right-hand clamping solution that accepts PHCR 12 indexable inserts and delivers secure fixation via an M5x12 Torx screw. Order the holder directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Parting clamp holder for PHCR 12 indexable inserts — right-hand, 120 mm — Teknik Makina Parting clamp holder designed for precision parting and grooving operations with PHCR 12 indexable inserts; compact shank for straightforward mounting in standard tool posts. Right-hand holder for PHCR 12 inserts 120 mm overall length 12 x 12 mm shank for standard toolposts Compatible with ISCAR PHCR 12 inserts Reliable clamping for consistent parting performance The holder is engineered to provide a stable clamping interface for parting operations, reducing vibration and improving surface finish. Acceptance of PHCR 12 indexable inserts allows use of established carbide grades from recognised manufacturers, while the 12 x 12 mm shank ensures secure seating in common tool posts. The compact 120 mm overall length supports close machining on lathes with limited turret travel. These characteristics combine to reduce scrap rates and increase process repeatability in production and jobbing environments. Quick tool changes and secure fastening Fast and repeatable tool changes are enabled by the defined clamping geometry and the M5x12 Torx fastening screw. The use of a T20 Torx key provides reliable torque transmission without damaging the head, delivering consistent clamping force cycle after cycle. As a result, setup times are shortened and downtimes are reduced, supporting lean machine utilisation. The holder’s right-hand orientation is clearly specified to match the required cutting direction and avoid operational ambiguity during tool allocation. Built for workshop integration and long service life Constructed for routine industrial use, the holder balances rigidity and accessibility for maintenance. The modest 0.13 kg mass simplifies handling and reduces load on the turret when multiple tools are mounted. Compatibility with inserts from ISCAR expands retrofit options for existing insert stocks, helping to centralise procurement and streamline tool kits. When employed in standard parting and grooving applications, the holder contributes to predictable cycle times and straightforward inventory management. For technical advice on integrating the Teknik Makina parting clamp holder into existing toolsets and for prompt supply from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D966TM Label: Stechklemmhalter PHCR 12 L120mm Product type: Parting clamp holder Manufacturer: Teknik Makina eClass: 21181005 Dimensions & weight Overall length: 120 mm Shank width: 12 mm Shank height: 12 mm Weight: 0.13 kg Compatibility & fastening Compatible inserts: PHCR 12 indexable inserts Suitable insert manufacturer: ISCAR Cutting direction: right Fastening screw: M5x12 Torx key: T20 FAQ Which inserts fit this holder? The holder accepts PHCR 12 indexable inserts; compatibility with ISCAR PHCR 12 inserts is specified for straightforward replacement and procurement. Is the holder for right-hand or left-hand cutting? The unit is specified for right-hand cutting direction and should be selected accordingly for the intended machining orientation. What fastening hardware is required? Fixing is via an M5x12 Torx screw tightened with a T20 Torx key to ensure consistent clamping torque. Can the holder be mounted in standard tool posts? The 12 x 12 mm shank is designed for standard tool posts and supports secure mounting in common turret and toolholder systems. What is the SKU for ordering and reference? The article is listed under SKU D966TM and is labelled Stechklemmhalter PHCR 12 L120mm for quick identification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of secure clamping, a compact 120 mm overall length and compatibility with PHCR 16 indexable inserts for reliable right-hand grooving performance; order directly via Metav Werkzeuge or consult our specialists for application advice. Grooving toolholder PHCR 16 L120 mm – right-hand, 120 mm (Teknik Makina) Grooving toolholder PHCR 16 for right-hand parting and grooving operations, designed to accept PHCR 16 indexable inserts for stable and repeatable machining in compact setups. Right-hand cutting direction Compatible with PHCR 16 indexable inserts Width and height 16 mm for compact setups Robust 120 mm overall length Consistent clamp performance for repeatable grooves A precise clamp design provides secure clamping and repeatable insert positioning, which reduces setup variation and scrap rates. The holder accepts PHCR 16 indexable inserts, a common geometry for narrow grooving and parting tasks, allowing standardised tooling across machines. The Torx T20 interface and M5x12 screw ensure a firm connection that is simple to torque to specification, translating into consistent cutting conditions and extended insert life. Space-saving form that improves machine integration With an overall length of 120 mm and a compact 16 mm cross-section (width and height), this toolholder integrates easily into tight tool layouts while maintaining rigidity under load. The reduced overhang lowers vibration and improves surface finish in grooving operations, especially on small lathes or multispindle machines. The low mass of the assembly contributes to quicker acceleration and deceleration, supporting shorter cycle times and higher throughput. Practical compatibility and clear machining orientation Designed for right-hand cutting, the holder matches applications that require material removal towards the operator’s right. Compatibility with inserts from established manufacturers such as ISCAR simplifies procurement and tool management. The item is identified as SKU D968TM and is suitable where a compact, reliable clamping solution is needed for repeatable grooving and parting operations. For procurement and application support on this Teknik Makina grooving toolholder, contact Metav Werkzeuge — direct supply from Emmerich with technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: D968TM Manufacturer: Teknik Makina Product type: Grooving toolholder Facts Overall length: 120 mm Weight: 0.23 kg Clamp width: 16 mm Clamp height: 16 mm Cutting direction: right Torx key size: T20 Torx screw: M5x12 Special features Compatible with PHCR 16 indexable inserts Suitable for inserts by ISCAR Compact 16 × 16 mm cross-section Right-hand orientation SKU D968TM FAQ Which inserts fit this toolholder? This grooving toolholder accepts PHCR 16 indexable inserts; inserts from ISCAR with the PHCR 16 geometry are compatible. What does right-hand cutting mean for installation? Right-hand cutting indicates the holder is set up for cuts made in the right-hand direction; the grooving toolholder PHCR 16 must be mounted accordingly for correct chip flow and tool clearance. Which screw and key are required for clamping? Clamping is secured with an M5x12 Torx screw driven by a T20 Torx key, providing reliable torque and repeatable clamp force. Is this holder suitable for tight tool layouts? Yes. The compact 16 mm width and height and the 120 mm overall length make the holder well suited to constrained setups where rigidity and a small footprint are essential. Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Stechklemmhalter Stechklemmhalter von Teknik Makina Der Stechklemmhalter bietet präzise Klemmeigenschaften für Stech- und Innenbearbeitung an Drehmaschinen und ist kompatibel mit ISO 2020 Schneidköpfen. Kompakte Gesamtlänge 120 mm für beengte Räume Passend für ISO 2020 Schneidköpfe Breite 20 mm, Höhe 20 mm für stabile Klemme Geeignet für Tungaloy Wendeplatten Torx Schraube M5x12 für sichere Befestigung Präzise Klemmung für konstant hohe Wiederholgenauigkeit Der Stechklemmhalter wurde für stabile Klemmkräfte und geringe Vibrationen konstruiert. Durch die ISO 2020 Schnittstelle lässt sich der Halter mit standardisierten Schneidköpfen kombinieren, was die Umrüstzeiten reduziert und die Wiederholgenauigkeit erhöht. Mit einer Gesamtlänge von 120 mm sowie einer Breite von 20 mm und einer Höhe von 20 mm sorgt der Halter für einen sicheren Sitz der Schneide, was wiederholte, saubere Schnitte ermöglicht und Ausschuss reduziert. Schnelle Montage und werksorientierte Handhabung Die Befestigung erfolgt über die beigefügte Torx Schraube M5x12, die mit einem Torx Schlüssel T20 einfach und sicher angezogen werden kann. Diese Kombination ermöglicht eine zügige Montage und Demontage, reduziert Rüstzeiten und vereinfacht den Werkzeugwechsel in der Werkstatt. Für Anwender ohne tiefe Fachkenntnis: ein Torx Schlüssel ist ein Schraubendreher mit sternförmiger Spitze, der Kraftübertragung und festen Sitz gewährleistet, die Torx Schraube M5x12 ist die passende Befestigungsschraube für diesen Halter. Kompatibilität mit Schneidplattenherstellern und wirtschaftlicher Vorteil Der Klemmhalter ist ausdrücklich geeignet für Tungaloy Wendeplatten, wodurch die Auswahl an verfügbaren Schneidgeometrien und Beschichtungen erweitert wird. Diese Kompatibilität erlaubt es, bewährte Plattentypen zu nutzen und Kosten für Sonderplatten zu vermeiden. Die robuste Konstruktion macht den Halter besonders geeignet für Serienfertigung und kleine Losgrößen, in denen schneller Werkzeugwechsel und konstante Schnittqualität wirtschaftlich entscheidend sind. Starke Empfehlung: Für gezielte Beratung und Bestellung den Stechklemmhalter D855TM von Teknik Makina bei Metav Werkzeuge anfragen; technische Rückfragen per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: D855TM Marke: Teknik Makina Produktart: Stechklemmhalter ISO-Bezeichnung: 2020 Gesamtlänge: 120 mm Klemmhalter Breite: 20 mm Klemmhalter Höhe: 20 mm Fakten Gesamtlänge: 120 mm Breite: 20 mm Höhe: 20 mm Torx Schraube: M5x12 Besonderheiten Passend für Wendeplattenhersteller: Tungaloy (geeignet für Tungaloy Wendeplatten) Torx Schlüssel: T20 (für Montage) Torx Schraube: M5x12 (Befestigung) ISO 2020 (Schnittstellenstandard für Wendeplatten) FAQ Welche Wendeplatten passen auf den Halter? Der Halter ist kompatibel mit Wendeplatten des Herstellers Tungaloy; in Verbindung mit der ISO 2020 Schnittstelle lassen sich gängige Tungaloy Platten sicher aufnehmen. Welche Abmessungen hat der Klemmhalter? Die Gesamtlänge beträgt 120 mm, die Klemmhalter Breite 20 mm und die Klemmhalter Höhe 20 mm; diese Maße bieten eine kompakte Lösung für beengte Anwendungen. Wie wird der Halter befestigt? Die Befestigung erfolgt mit einer Torx Schraube M5x12, die mit einem Torx Schlüssel T20 angezogen wird; diese Kombination ermöglicht eine sichere und schnelle Montage. Für welche Art von Bearbeitung ist der Halter geeignet? Der Halter eignet sich primär für Stech- und Innenbearbeitung an Drehmaschinen, bei denen stabile Klemmeigenschaften und standardisierte Plattenanschlüsse gefragt sind. Welche Vorteile bringt die ISO 2020 Schnittstelle? Die ISO 2020 Schnittstelle ermöglicht die Nutzung standardisierter Schneidköpfe, reduziert Rüstzeiten und vereinfacht den Austausch von Wendeplatten verschiedener Anbieter wie Tungaloy. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com