Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the combination of precision geometry, secure mounting and broad compatibility to ensure reliable corner turning in series production; order the component directly via Metav Werkzeuge or consult their specialists for integration advice. Corner tool head T902TM – for XNKT 0805 indexable inserts, Ø50, 90°, Teknik Makina The Corner tool head T902TM is a compact turning head engineered for 90° corner operations with XNKT 0805 indexable inserts, intended for integration into medium‑duty CNC and turning setups. Designed for XNKT 0805 indexable inserts 90° cutting angle for accurate cornering Ø50 body with 22 mm shank mounting Torx M4x10 fastener, T15 key size Consistent 90° cornering for repeatable parts The head delivers a 90° cutting angle that stabilises corner cuts and reduces secondary operations. By using standard XNKT 0805 indexable inserts, the component provides predictable chip formation and repeatable edge geometry, which supports tight tolerances in serial production. The design emphasises precision and process stability, making it suitable for batch manufacturing where consistent part quality and minimal setup variance are required. Secure mounting and clear assembly for faster changeovers Engineered with a Ø50 body and a 22 mm mounting diameter, the unit ensures a compact footprint with stable clamping. The Torx M4x10 fastening simplifies clamp force transmission while the specified T15 key size standardises the required tool for assembly and maintenance. With an overall length of 45 mm and a low mass of 0.396 kg, the head minimises overhang vibration and supports repeatable tool positioning, resulting in improved surface finish and longer insert life under comparable cutting conditions. Production-ready compatibility and straightforward spare strategy Compatibility with Korloy XNKT 0805 inserts places the head within a widely available tooling ecosystem, easing procurement and spare-part logistics. The construction supports five effective cutting edges and a compact geometry that integrates into multi‑station turrets and pick‑up toolholders. Backed by Teknik Makina manufacturing standards, this component streamlines tool‑set planning and reduces machine downtime through rapid insert changes and standardised mounting dimensions. For integration advice or to discuss application-specific requirements for the Teknik Makina T902TM corner tool head, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a technical consultation and procurement support. Technical data Article number: T902TM Manufacturer: Teknik Makina Suitable for: XNKT 0805 indexable inserts Dimensions & weight Diameter: 50 mm Overall length: 45 mm Shank diameter: 22 mm Weight: 0.396 kg Cutting angle: 90° Special features Torx screw M4x10 Torx key size T15 Compatible with Korloy XNKT 0805 inserts Five cutting edges FAQ Is the head compatible with Korloy XNKT 0805 inserts? Yes. The T902TM corner tool head is specified for use with XNKT 0805 indexable inserts and is listed as compatible with Korloy plates. What fastening method is used for the insert and head? The design uses a Torx M4x10 screw for secure clamping; the required Torx key size is T15. What are the mounting dimensions for the head? The body diameter is Ø50 mm with a shank mounting diameter of 22 mm and an overall length of 45 mm. How many cutting edges does the unit support? The component specification indicates five cutting edges as part of its design characteristics. For which operations is this head primarily intended? The head is intended for 90° corner turning and related indexable insert applications in CNC lathe and turret setups, providing repeatable geometry for series parts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

A compact 50 mm indexable corner tool head with internal coolant and a robust T15 Torx interface offers reliable 90° cutting and simple changeover; order through Metav Werkzeuge or consult our advisors for application-specific details. Indexable Corner Tool Head (T228-1TM) — 50 mm diameter, internal coolant · Teknik Makina The Indexable Corner Tool Head (T228-1TM) is a compact turning head designed for LNMT 1306 indexable inserts, delivering precise 90° cutting for general turning and shoulder operations in industrial workshops. *50 mm diameter for compact operations *Internal coolant for improved chip evacuation *Compatible with LNMT 1306 indexable inserts *Ready for T15 Torx mounting Compact design for consistent 90° turning results Engineered for stability and repeatable performance, this corner tool head combines a 50 mm diameter with a 40 mm overall length, creating a compact tool that reduces overhang and vibration. The 90° cutting angle ensures reliable shoulder formation and square-edge turning, while the balanced mass of 0.337 kg supports stable spindle behaviour. For production environments where consistent geometry matters, this configuration minimises deflection and helps maintain dimensional accuracy across batch runs. Internal coolant for controlled temperatures and cleaner chips The integrated internal coolant channel directs cutting fluid close to the cutting zone, promoting better heat management and assisting chip evacuation. By keeping temperatures more consistent at the cutting edge, tool wear is moderated and surface finish becomes more reproducible. This feature is particularly relevant when machining challenging materials or running longer cycles; the cooling path supports process reliability without requiring external modification to the toolholder setup. Fast, dependable mounting with industry-standard interfaces Designed to accept LNMT 1306 inserts and compatible with ISCAR insert geometry, the head simplifies inventory and insert sourcing for many workshops. The tool head accepts a T15 Torx key for secure clamping and straightforward insert changes, reducing downtime during indexings. A mounting bore of Ø 22 mm facilitates straightforward integration into standard turret and toolpost clamping systems, allowing quick changeover and efficient tool management in daily shop workflows. Built for industrial workflows and clear supplier support Manufactured by Teknik Makina, this tool head addresses the demands of modern turning shops that require durable components and predictable performance. The design supports routine maintenance and rapid insert replacement, enabling predictable cycle times. Choosing a robust component such as this assists in streamlining tooling lists and concentrating supplier relationships, which aligns with the practical needs of production planners and workshop managers seeking dependable tooling solutions. For ordering, technical clarification or application guidance on the Teknik Makina indexable corner tool head (T228-1TM), contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 for direct assistance and fast supply. Technical Data SKU: T228-1TM Product type: Indexable corner tool head Manufacturer: Teknik Makina Core dimensions Diameter: 50 mm Overall length: 40 mm Weight: 0.337 kg Mounting bore: Ø 22 mm Cutting angle: 90° Number of cutting edges: 5 Features Internal coolant: yes Compatible inserts: LNMT 1306 Compatible insert manufacturer: ISCAR Torx key interface: T15 eClass: 21181015 FAQ Is this head compatible with LNMT 1306 inserts only? The head is specified for LNMT 1306 indexable inserts and is compatible with ISCAR geometry for that insert type. Can the internal coolant be used with standard shop coolant systems? Yes, the internal coolant channel is intended to be fed from standard shop coolant supplies to deliver fluid close to the cutting edge. What toolholder interface is required for mounting this head? The tool head mounts on a bore of Ø 22 mm and uses a T15 Torx interface for secure clamping of the insert. How does the 90° cutting angle affect machining tasks? A 90° cutting angle provides reliable shoulder and square-edge turning, aiding in precise contouring and consistent dimensional control. Which manufacturer produced this tool head and who is responsible for supply? The tool head is produced by Teknik Makina and supplied via Metav Werkzeuge for European distribution Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a 50 mm diameter, internal coolant and a precise 90° cutting angle to achieve stable, repeatable right-angle machining; order this corner tool head directly via Metav Werkzeuge or consult our specialists for compatibility advice. Corner tool head T593TM – 50 mm diameter, internal coolant (Teknik Makina) A compact corner tool head T593TM for turning with TNKT 1606 indexable inserts, designed to deliver controlled chip evacuation and secure clamping in medium‑duty production environments 50 mm diameter for stable cutting performance Internal coolant for improved chip control Compatible with TNKT 1606 indexable inserts Secured with T15 Torx and M4x10 screw Increased process stability for right‑angle turning The design combines a 50 mm diameter body with a 90° cutting angle to provide a rigid interface for right‑angle operations, reducing vibration and deflection during cutting. The compact L40 mm length keeps overhang to a minimum, which improves dimensional consistency and surface finish on turned parts. For production environments where predictable cycle times and consistent tool life matter, this geometry supports steady material removal rates and repeatable tolerances. Coolant delivery and secure fastening reduce downtime Equipped with internal coolant, the head directs cutting fluid close to the cutting edge, improving coolant penetration and chip evacuation. This reduces recutting of chips and helps preserve insert life, particularly in interrupted cuts. Fast replacement and secure clamping are facilitated by the T15 Torx drive and M4x10 fixing screw, enabling quick insert changes and minimising machine downtime. Compatibility with TNKT 1606 indexable inserts from Korloy allows use of established insert grades for different materials. Suitable for mixed workshop and light production use Weighing approximately 0.284 kg, the unit is light enough for manual lathe setups yet robust for use on CNC lathes and multi‑spindle turning centres. The construction supports a variety of turning tasks where a right‑angle approach or external profiling is required. The combination of coolant support and standardised fixing elements makes maintenance straightforward and aligns with common workshop tool inventories, supporting efficient tool management and rapid replacement cycles. Contact Metav Werkzeuge today to discuss Teknik Makina’s 50 mm corner tool head T593TM and confirm suitability for specific TNKT 1606 inserts and machines Technical data Article number: T593TM Manufacturer: Teknik Makina Product type: Corner tool head Suitable for indexable inserts: TNKT 1606 Compatible insert manufacturer: Korloy Eclass: 21181015 Facts Diameter: 50 mm Total length: 40 mm Weight: 0.284 kg Cutting angle: 90° Cutting edges: 5 Special features Internal coolant: yes Fixing screw: M4x10 Torx key: T15 Designed for turning/right‑angle operations FAQ Which inserts fit this tool head? The tool head accepts TNKT 1606 indexable inserts; it is specified as compatible with inserts from Korloy. Is the coolant delivered to the cutting zone? Yes, the head features internal coolant to improve chip evacuation and cooling at the cutting edge. What torque or key is required for securing the insert? A T15 Torx key is used together with an M4x10 fixing screw for secure clamping. Can the head be used on CNC lathes and manual lathes? The head’s compact L40 mm length and 50 mm diameter make it suitable for both CNC lathes and manual setups where right‑angle turning is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

A compact, high-rigidity corner tool head that combines a 50 mm head diameter with a 22 mm shank to deliver repeatable turning performance; compatible with LNMX 1006 indexable inserts from Korloy and secured by an M3x7 Torx clamp for straightforward maintenance. Benefit from stable machining in tight setups and order the corner tool head directly via Metav Werkzeuge or ask our consultants if needed. Corner tool head for LNMX 1006 indexable inserts (Teknik Makina) A compact corner tool head engineered for precise external turning with LNMX 1006 indexable inserts, optimised for short overhangs and high process stability 50 mm head diameter for stable cutting Accepts LNMX 1006 indexable inserts 22 mm shank for standard toolposts 90° cutting angle for square shoulders Includes M3x7 Torx clamp screw Consistent rigidity for repeatable surface quality The shortened overall length and robust construction provide a measurable reduction in tool deflection. With a 45 mm overall length and 22 mm shank, the component keeps the cutting edge close to the support plane, which reduces vibration and improves surface finish on external turning operations. The specified 90° cutting angle is particularly effective for producing square shoulders and shoulder transitions with predictable geometry. These design parameters translate directly into fewer re‑works and higher first‑pass yields on production runs. Plug‑and‑play insert compatibility to speed setup Compatibility with LNMX 1006 indexable inserts from Korloy simplifies tool inventory and shortens changeover times. The head accepts standard indexable inserts and is secured using an M3x7 Torx screw, tightened with a T8 key, allowing fast, repeatable clamping with common workshop tools. Standardised insert handling reduces the need for bespoke fixtures and supports consistent cutting data across multiple machines, improving throughput and lowering process variability. Practical maintenance and installation advantages A total weight of 0.472 kg and a compact profile make handling and toolpost alignment straightforward during routine changes. The Torx clamping system gives a positive, corrosion‑resistant interface that is easy to service; spare clamp screws are industry standard and replacement is quick. The head’s dimensions and form factor are intended to minimise downtime during insert changes, which supports steady productivity in batch and single‑piece manufacturing alike. Designed for production‑orientated workshops The component is suited to workshops and subcontractors requiring a reliable turning solution that balances rigidity and accessibility. Its combination of 50 mm head diameter, short overhang and standardised clamping supports stable feeds at commonly used spindle speeds while keeping the tooling package compact for multi‑tool lathes. The result is a pragmatic tool head that merges established geometry with simple maintenance to support continuous operation on shop floors. For stable, production‑ready turning choose Teknik Cutting Tools' corner tool head — contact Metav Werkzeuge in Emmerich for availability and technical advice at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: T387TM Name: Corner tool head (Eckmesserkopf) Brand: Teknik Makina For inserts: LNMX 1006 indexable inserts Compatible insert manufacturer: Korloy Dimensions & core data Head diameter: 50 mm Overall length: 45 mm Shank / take‑up diameter: 22 mm Weight: 0.472 kg Cutting angle: 90° Number of cutting edges: 6 Torx screw: M3x7 Torx key: T8 Special features Accepts LNMX 1006 indexable inserts Short overhang for increased rigidity Standard Torx clamping for quick service Suitable for external turning and shoulder work FAQ Which inserts fit this corner tool head? The head accepts LNMX 1006 indexable inserts; compatibility with Korloy‑made inserts is stated in the technical specification. What size shank is required for mounting? Mounting requires a toolholder accepting a 22 mm shank diameter as listed for the unit. Is the clamp screw type industry standard? Yes, the tool head uses an M3x7 Torx clamp screw secured with a T8 key for straightforward servicing. What operations is the head best suited to? The design is optimised for external turning and producing square shoulders where a 90° cutting angle ensures consistent shoulder geometry. How compact is the head for tight setups? With a 45 mm overall length and a 50 mm head diameter, the unit is engineered for confined toolpost arrangements while maintaining rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Eckmesserkopf für BOMT 1304 Wendeplatten von Teknik Makina Der Eckmesserkopf ermöglicht präzise Außen- und Innenbearbeitung mit integrierter Innenkühlung und ist für anspruchsvolle Zerspanungsaufgaben konzipiert. Eckmesserkopf »T966-2TM« von Teknik Makina Innenkühlung für bessere Spanabfuhr Kompatibel mit BOMT 1304 Wendeplatten Durchmesser 50 mm für stabile Führung Schnittwinkel 90° und 6 Schneiden für konstante Ergebnisse Hohe Zerspanungsstabilität durch integrierte Innenkühlung Die integrierte Innenkühlung reduziert Wärmeeintrag direkt in der Schneidzone und verbessert so die Werkzeugstandzeit sowie die Oberfläche des Werkstücks. Durch gezielte Kühlung werden Späne sicher aus dem Schnitt gefördert, was Rattermarken und Werkzeugverschleiß minimiert. Dieses Merkmal sorgt insbesondere bei längeren Werkzeugauskraglängen für gleichbleibende Fertigungsqualität und weniger Stillstandzeiten in der Fertigung. Direkte Kompatibilität mit BOMT 1304 und Ingersoll-Systemen Konzipiert für die Aufnahme der BOMT 1304 Wendeplatten, bietet der Halter eine einfache Integration in bestehende Werkzeugkonzepte. Die Auslegung erlaubt den Einsatz von Wendeplatten im Ingersoll-Standard, wodurch sich Umrüstzeiten reduzieren und Bestandswerkzeuge optimal genutzt werden können. Anwender profitieren von der Verfügbarkeit bewährter Schneidengeometrien und einer klaren Schnittstellenkompatibilität. Einfache Montage, sichere Verbindung und wartungsfreundliche Handhabung Die Montage erfolgt mit einer Torx-Verbindung; benötigter Torx Schlüssel T10 und die Torx Schraube M3,5x8,5 gewährleisten eine formschlüssige Befestigung der Wendeplatten. Die Geometrie mit 6 Schneiden und Schnittwinkel 90° erlaubt gleichmäßige Belastungsverteilung und einfache Nachlegung. Die kompakte Bauform mit Durchmesser 50 mm und Gesamtlänge 40 mm unterstützt stabile Einspannverhältnisse und kurze Rüstzeiten. Empfehlung: Der Eckmesserkopf von Teknik Makina ist besonders geeignet für Ingersoll BOMT 1304 Wendeplatten und empfiehlt sich für präzise Eckbearbeitung; bei technischen Fragen erreichen Sie den Metav Kundenservice unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Produktmerkmale Bezeichnung: Eckmesserkopf für BOMT 1304 Wendeplatten Artikelnummer / SKU: T966-2TM Produktart: Eckmesserkopf Marke: Teknik Makina Fakten Durchmesser: 50 mm Gesamtlänge: 40 mm Aufnahme Ø: 22 mm Schneiden: 6 Schnittwinkel: 90° Gewicht: 0,374 kg Besonderheiten Innenkühlung Passend für Wendeplatten: BOMT 1304 Passend für Wendeplatten Hersteller: Ingersoll Torx Schlüssel: T10 Torx Schraube: M3,5x8,5 (Gewinde M3,5, Länge 8,5 mm) FAQ Welche Wendeplatten passen auf den Eckmesserkopf? Der Eckmesserkopf von Teknik Makina ist ausgelegt für BOMT 1304 Wendeplatten und kompatibel mit Systemen des Herstellers Ingersoll, wodurch bewährte Schneidengeometrien genutzt werden können. Wie wirkt sich die Innenkühlung auf die Standzeit aus? Die Innenkühlung sorgt für gezielte Kühlung der Schneidzone, reduziert thermischen Verschleiß und trägt damit deutlich zur Verlängerung der Werkzeugstandzeit bei. Welche Befestigungsteile werden benötigt? Für die sichere Montage werden Torx Schraube M3,5x8,5 und ein Torx Schlüssel T10 verwendet; beides ist technisch im System berücksichtigt. Für welche Anwendungen ist der Eckmesserkopf besonders geeignet? Der Halter eignet sich für präzise Eckbearbeitung und Außenbearbeitung bei Bauteilen, die von stabiler Führung und aktiver Kühlung profitieren, insbesondere bei Serienfertigung und längeren Schnittzeiten. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid design and proven compatibility with APKT 1604 indexable inserts for reliable square-facing and profiling. With a 22 mm shank and a 50 mm head diameter the tool head offers high torsional stability and reduced overhang for improved surface quality. Order via Metav Werkzeuge or ask the consultants for application advice. Eckmesserkopf — Corner turning head for APKT 1604 indexable inserts, 22 mm shank (Teknik Makina) The Eckmesserkopf is a compact corner turning head designed for square-facing and profiling on CNC lathes using APKT 1604 indexable inserts for consistent 90° cuts 90° cutting angle for square profiles Compatible with APKT 1604 indexable inserts 22 mm shank diameter for secure clamping M4x10 Torx screw T15 for reliable assembly Rigidity and process stability for square-facing The corner turning head delivers predictable geometry thanks to its 90° cutting angle and sturdy construction. Fitted for APKT 1604 indexable inserts it provides a controlled cutting edge position that helps to achieve consistent part dimensions and a fine surface finish. The combination of a 22 mm shank and a modest 50 mm diameter reduces cantilever effects, which translates into lower vibration and steadier cutting conditions for demanding finishing passes Secure clamping and simple maintenance for uninterrupted production A robust clamping arrangement, completed with the M4x10 Torx screw (T15), ensures the insert is held firmly during interrupted cuts. The Torx drive offers consistent torque application and quick replacement when inserts are worn, reducing downtime. Routine inspection of the screw and insert seat keeps the tool head performing within tolerance and extends component life, lowering total operating costs in the long run Compact dimensions that free up turret space and increase rigidity The compact overall length of 45 mm and reduced head profile make this tool head suitable where turret space is limited. Shorter overhang improves rigidity, enabling higher feed rates in finishing operations without sacrificing surface quality. The restrained mass (approx. 0.406 kg) eases handling during tool changes and helps maintain balance in multi-tool setups Compatibility, application scope and practical benefits Designed to work with inserts from established manufacturers—notably Korloy—this turning head supports reliable insert availability and proven cutting geometries. With four cutting edges it allows systematic index changes to keep cycle times low. The head's dimensions and interface make it suitable for general turning, profiling and light shoulder work where a 90° approach is required. For traceability the item is stocked under SKU T182TM For precise 90° finishing with Teknik Makina reliability, contact Metav Werkzeuge in Emmerich for ordering and application support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T182TM Manufacturer: Teknik Makina Name: Eckmesserkopf For: APKT 1604 indexable inserts Compatible insert maker: Korloy Torx screw: M4x10, Torx key T15 Dimensions & weights Head diameter: 50 mm Shank diameter: 22 mm Overall length: 45 mm Number of cutting edges: 4 Weight: 0.406 kg Cutting angle: 90° Special features Designed for APKT 1604 indexable inserts Secure clamping via M4x10 Torx screw (T15) Compact form factor for reduced overhang Suitable for square-facing and profiling on CNC lathes FAQ Is this turning head compatible with standard APKT 1604 inserts? Yes. The turning head is specified for APKT 1604 indexable inserts and has been produced to match the seating geometry usually used with Korloy insert types What shank size is required for mounting the head? The tool head requires a 22 mm shank interface and is designed for conventional tool posts and holders that accept this diameter Which Torx drive is used to secure the insert and how tight should it be? The insert is secured with an M4x10 Torx screw using a T15 bit; follow the insert manufacturer's recommended torque values for secure fastening and to avoid over-tightening Can the head be used for roughing operations or is it intended for finishing only? The compact design and 90° geometry are optimised for finishing and profiling; it can perform light roughing where appropriate clamping and cutting data are observed What is the SKU for ordering and stock reference? The item is stocked as T182TM, which should be quoted when enquiring or placing an order Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Achieve consistent 90° shoulder and face machining with a compact corner tool head that combines a 22 mm shank for standard tool posts and secure M4x10 Torx clamping; compatibility with ADMT 1606 indexable inserts and a lightweight 0.397 kg design support steady cycle times. Order directly via Metav Werkzeuge or consult our specialists for workshop integration advice. Corner tool head – indexable insert holder for ADMT 1606, 90° cutting angle (Teknik Makina) Corner tool head for reliable turning and facing operations using ADMT 1606 indexable inserts, designed for compact mounting and secure Torx clamping Compact tool holder for ADMT 1606 inserts 90° cutting angle for shoulder and face machining 22 mm shank for standard tool posts Supplied with M4x10 Torx screw and T15 key Stable seating and dependable clamping for shorter setup times The compact corner tool head offers a stable seating geometry that reduces vibration during short overhang operations. Compatibility with ADMT 1606 indexable inserts ensures a familiar insert form factor for fast replacement and repeatable positioning. The holder's secure clamping via an M4x10 Torx screw and the supplied T15 key gives a reliable mechanical connection without the need for specialised tightening tools, which leads to lower setup times and fewer interruptions at the machine. Rigidity where it matters: 90° geometry and compact dimensions A true benefit of the tool head is the 90° cutting angle, which is optimised for shoulder cuts and facing tasks where perpendicular tool orientation is required. The combination of a diameter 50 mm head, a total 45 mm length, and a 22 mm shank results in a compact but rigid package that keeps deflection low on short-reach operations. This rigidity translates into improved surface finish and more consistent machining results, especially when paired with suitable indexable inserts and correct feed parameters. Seamless integration into existing fixtures and insert systems Designed for practical workshop use, the holder fits existing tool posts with a 22 mm mounting shank and accepts inserts from established manufacturers such as Walter, simplifying inventory management. The familiar insert interface reduces training effort for the shop floor and helps maintain uptime. At approximately 0.397 kg, the lightweight construction eases handling during insert changes and keeps the assembly balanced on the turret. Practical maintenance benefits and production reliability Maintenance is straightforward: standard Torx hardware and accessible clamping mean insert changes are quick, limiting machine downtime. The compact design supports consistent cycle times and repeatability across batches, contributing to predictable production output. Sourcing through an experienced distributor adds a further layer of assurance — Metav operates a quality filter from Emmerich and supports reliable delivery to the workbench. Secure production continuity with the Teknik Cutting Tools corner tool head — request it from Metav Werkzeuge or consult our specialists for compatibility and integration guidance Technical data Article number: T352TM Manufacturer: Teknik Makina For indexable inserts: ADMT 1606 (for ADMT 1606 Indexable Inserts) Facts Shank diameter: 22 mm Head diameter: 50 mm Total length: 45 mm Weight: 0.397 kg Cutting angle: 90° Torx screw: M4x10 Torx key: T15 Compatible insert manufacturer: Walter Special features Designed for ADMT 1606 indexable inserts Compact, rigid 90° geometry Supplied fixing screw and tool for installation Suitable for turret and tool post mounting FAQ What insert type does the holder accept? The corner tool head is designed for ADMT 1606 indexable inserts and seats those inserts with the standard interface for reliable location and clamping. Is the holder compatible with inserts from other brands? Compatibility is confirmed for inserts from Walter; the holder uses the ADMT 1606 form factor common across multiple manufacturers. What torque tool is required for clamping the insert? Clamping is performed with the supplied M4x10 Torx screw using a T15 key for secure fixation. Can the holder be mounted in standard 22 mm tool posts? Yes, the holder features a 22 mm shank intended for standard tool post and turret interfaces. How does the compact design benefit production? The compact dimensions (50 mm head, 45 mm length) and lightweight construction reduce overhang and deflection, improving surface finish and repeatability in short-reach operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-performance milling solution that combines a 50 mm diameter, internal coolant and seven cutting edges for reliable material removal and improved tool life. Order the face milling head directly through Metav Werkzeuge or consult our specialists for application advice. Face milling head T481-1TM — 50 mm with internal coolant, for BLMP 0603 (Teknik Makina) A face milling head engineered for precision face milling with BLMP 0603 indexable inserts, offering internal coolant for stable cutting conditions and suitability across general finishing and semi-roughing tasks. 50 mm diameter for compact setups Internal coolant for optimised chip evacuation Compatible with BLMP 0603 inserts (Taegutec) Seven cutting edges for efficient material removal Optimised cooling and consistent cutting quality The integrated internal coolant channel directs cutting fluid close to the cutting zone, reducing thermal load and prolonging insert life. With a compact 50 mm diameter and a total length of 50 mm, this milling head maintains rigidity in confined set-ups while ensuring efficient chip evacuation. The result is a reproducible surface finish and lower risk of thermal damage during continuous operation, which translates into fewer tool changes and higher process uptime. Broad compatibility for flexible tooling strategies Designed for use with BLMP 0603 indexable inserts, the head accepts inserts from Taegutec, enabling straightforward integration into existing tool inventories. Fast, secure insert clamping is facilitated by the specified M3 x 6.2 Torx screws and a T8 driver interface, allowing predictable torque and ease of maintenance. This compatibility supports inventory rationalisation and faster changeovers on the shop floor. High productivity through smart geometry The cutter is configured with 7 cutting edges and a cutting angle of 100°, a combination that balances aggressive material removal with controlled cutting forces. The geometry supports high material removal rates while limiting vibration, which helps achieve shorter cycle times and consistent dimensional results. For workshops aiming to boost throughput without sacrificing finish quality, this head offers a measurable productivity gain. Workshop-ready design and practical handling Weighing 0.457 kg and manufactured by Teknik Makina, the head is lightweight enough for safe handling yet robust for repeated use. The design simplifies routine maintenance: replacement of inserts and tightening of the Torx screws is straightforward, and internal coolant reduces manual clearing of chips. For operators seeking reliable, repeatable performance in milling tasks, this head integrates smoothly into standard toolholding systems. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina face milling head T481-1TM — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability, delivery and integration into existing tooling setups. Technical data Article number: T481-1TM Label: 50mm Planmesserkopf BLMP 0603 L50mm mit Innenkühlung eClass: 21181015 Manufacturer: Teknik Makina Facts Diameter: 50 mm Overall length: 50 mm Weight: 0.457 kg Cutting edges: 7 Cutting angle: 100° Torx screw: M3 x 6.2 Torx key: T8 Special features Internal coolant For BLMP 0603 indexable inserts Compatible insert manufacturer: Taegutec Product type: Face milling head FAQ What insert type is required for this milling head? The Teknik Makina face milling head T481-1TM is designed for BLMP 0603 indexable inserts and is compatible with inserts from Taegutec. Is there coolant supply through the tool? Yes, this face milling head features internal coolant to support cooling at the cutting edge and to improve chip evacuation. Which screw and driver are used for clamping the inserts? Insert clamping uses M3 x 6.2 Torx screws and a T8 Torx driver for secure and repeatable tightening. What benefits do the seven cutting edges provide? The configuration with 7 cutting edges offers higher material removal capability and longer time between indexings, improving productivity in serial milling tasks. Can this head be used in compact setups and short overhangs? With a 50 mm diameter and a 50 mm overall length, the head is well suited to compact configurations where rigidity and minimal overhang are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of workshop-ready compatibility, compact design and secure Torx fastening for efficient surface machining; order the tool via Metav Werkzeuge or contact our consultants for tailored advice. Planing cutter head T363TM – compact indexable head, Ø50 mm, for SDMT 09T3 inserts (Teknik Makina) A robust planing cutter head designed for use with SDMT 09T3 indexable inserts, ideal for light to medium-duty face and finishing operations in CNC and turning tool applications. Compatible with SDMT 09T3 indexable inserts Diameter 50 mm for stable cutting 22 mm shank for standard toolholders Torx fastening M3.5x8.5, key T15 Consistent surface quality through compact design The compact head geometry ensures stable cutting and consistent results when machining flat or lightly profiled surfaces. With a nominal diameter of Ø50 mm and a slim overall length of 40 mm, the design minimises overhang and vibration, which in turn supports repeatable finishes. The arrangement of the 5 cutting edges distributes cutting forces to reduce chatter and helps maintain dimensional accuracy during routine production runs. Rapid, secure mounting for predictable set-up times Fast and reliable fastening is achieved with the specified Torx M3.5x8.5 screw and T15 key interface, allowing maintenance teams to change inserts and secure the head quickly. The 22 mm shank diameter fits common toolholders, reducing the need for special adapters and simplifying tool inventory. Compatibility with standard holders shortens machine downtime and streamlines setup procedures, improving throughput without complex adjustments. Designed for workshop durability and balanced performance Engineered with attention to balance and weight, the head is lightweight at 0.355 kg, which helps preserve spindle life and contributes to overall machine stability at typical operating speeds. The construction supports repeated insert indexing and straightforward maintenance, making the component suitable for job shops and light production environments. Compatibility with inserts from ZCC further broadens sourcing options and eases procurement. Practical integration and target applications This cutter head is aimed at workshops and production facilities that require a compact, dependable solution for face machining and finishing tasks. The configuration supports quick insert changes and predictable process control, which is particularly useful in small-batch production and workshop retrofit projects. Operators and toolroom managers benefit from the balance of simplicity and precision that this head offers, and planners will appreciate the straightforward compatibility with SDMT 09T3 indexable inserts. For reliable workshop performance and precise compatibility with SDMT 09T3 inserts, request the Teknik Makina planing cutter head T363TM via Metav Werkzeuge — contact Metav Werkzeuge for technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T363TM Product name: Planing cutter head Manufacturer: Teknik Makina Core specifications Diameter: 50 mm Overall length: 40 mm Shank diameter: 22 mm Cutting edges: 5 Weight: 0.355 kg Features and compatibility Compatible with SDMT 09T3 indexable inserts Compatible insert manufacturer: ZCC Torx screw: M3.5x8.5 Torx key: T15 ECLASS: 21181015 FAQ Which inserts fit this cutter head? The head is specified for SDMT 09T3 indexable inserts and accepts inserts from manufacturers such as ZCC for standard applications. What is the shank diameter and why does it matter? The 22 mm shank diameter ensures compatibility with common toolholders, providing secure clamping and minimising the need for adaptors when integrating the head into existing tool systems. How many cutting edges does the head support? The tool accommodates 5 cutting edges, arranged to distribute cutting forces evenly and support smoother surface finishing operations. Is the fastening system industry-standard? Yes. The head uses a Torx M3.5x8.5 screw with a T15 key, a robust and repeatable fastening solution for workshop maintenance routines. Can this head be used for heavy roughing operations? This component is optimised for light to medium-duty face and finishing work; for heavy roughing, a dedicated heavy-duty head is recommended. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-stability face milling head that combines precise insert compatibility with robust fastening; the 50 mm diameter unit accepts SDMT 1204 indexable inserts and secures them with an M4x10 Torx screw (T15). Order the face milling head directly via Metav Werkzeuge or consult our specialists for application guidance. Face milling head T358TM — 50 mm diameter, 4-edge design (Teknik Makina) Face milling head for SDMT 1204 indexable inserts, designed for stable face milling in turning and machining setups. 50 mm head diameter Secure clamping with Torx M4x10 Compatible with SDMT 1204 inserts 22 mm shank for stable mounting Stable cutting for consistent surface finishes The compact head offers a 50 mm diameter and a balanced 4 cutting edges, delivering consistent chip formation and reduced vibration during face milling operations. Built around a 22 mm shank for reliable seating, the cutter head provides secure clamping via an M4x10 Torx screw and a T15 key interface, which together reduce setup time and help maintain concentricity. The combination of a short overall length and defined mounting diameter supports repeatable tool position and predictable machining results. Efficient insert handling and downtime reduction Designed specifically for use with SDMT 1204 indexable inserts, the head simplifies tool changes: inserts are located and fixed with a single Torx screw, enabling rapid replacement and minimising machine downtime. The four-edge configuration spreads wear across multiple cutting edges, extending the interval between tool changes. For workshops prioritising throughput, this cutter head translates compatibility and quick maintenance into measurable production continuity. Practical integration into existing toolchains With its standard 22 mm holder reception and a compact overall length of 40 mm, the head fits common arbors and adaptors used in ISO-style tool systems, supporting straightforward integration into existing setups. The light weight (0.315 kg) facilitates handling and reduces inertia on the turret, while the simple mechanical design supports easy inspection and service. Supplied specifications and the known insert format allow planning for stocking and replacement without ambiguity, ensuring procurement and tooling strategies remain efficient. For procurement or application advice regarding the Teknik Cutting Tools face milling head T358TM, contact Metav Werkzeuge in Emmerich for direct supply and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T358TM Manufacturer: Teknik Makina Product: Face milling head for SDMT 1204 indexable inserts eClass: 21181015 Facts Diameter: 50 mm Overall length: 40 mm Shank / holder diameter: 22 mm Weight: 0.315 kg Cutting edges: 4 Torx screw: M4x10 Torx key: T15 Special features Compatible with SDMT 1204 indexable inserts Suitable for inserts from ZCC Compact design for easy integration FAQ Which inserts fit this milling head? The face milling head accepts SDMT 1204 indexable inserts; compatibility is specified for inserts from ZCC. How is the insert fixed to the head? Inserts are secured with an M4x10 Torx screw tightened using a T15 key; follow the insert manufacturer's torque recommendation for final clamping. What mounting diameter is required? The head uses a 22 mm shank/holder reception and a 50 mm cutter diameter for seating and clearance. What are the key dimensions and weight? The cutter head has a 50 mm diameter, 40 mm overall length and weighs 0.315 kg (SKU T358TM). Is the head suitable for quick tool changes on multi-spindle machines? The single-screw clamping of SDMT 1204 inserts and the compact design support short changeover times and straightforward replacement procedures. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a compact 22 mm mounting with a 63 mm maximum cutting diameter and four cutting edges, this tool body delivers precise, repeatable face milling with fast indexable-insert changes; order the Planmesserkopf directly via Metav Werkzeuge or ask our consultants for process alignment. Planmesserkopf T320TM – face milling head for SNKX 1206 indexable inserts (Teknik Makina) The Planmesserkopf is a compact face milling head engineered for light to medium finishing and trimming operations using SNKX 1206 indexable inserts. Compatible with SNKX 1206 indexable inserts Ø63 mm maximum cutting diameter 22 mm mounting diameter for compact spindles Four cutting edges for continuous finish Compact mounting for versatile machine integration The head's reduced profile and short overall length make it suitable for setups with limited clearance. With a 22 mm mounting, a 44 mm overall length and a mass of 0.593 kg, the design minimises overhang and helps to contain vibration during light finishing cycles. The compact footprint allows installation on smaller milling heads and fixtures while maintaining the rigidity required for predictable metal-removal performance. Stability here translates into fewer reworks and steadier surface quality across batches. Consistent finishing and efficient material removal Equipped with four cutting edges and a 63 mm maximum cutting diameter, the cutter is configured for steady, economical finishing passes. The 45° cutting angle produces balanced axial and radial cutting forces, which assists in achieving uniform surface finish and reduces tool chatter in common applications. Compatibility with SNKX 1206 indexable inserts and recognised insert brands like Böhlerit, Korloy and Palbit simplifies procurement and keeps running costs transparent — fewer unexpected changeovers and a predictable tool-life budget. Secure clamping and straightforward serviceability Clamping is effected with a standard M4x12.5 Torx screw and requires a T15 key, enabling quick insert replacement with familiar workshop tools. The Torx interface reduces cam-out and ensures repeatable seat pressure on every change, contributing to consistent cutting geometry and longer insert life. The cutter body’s balanced layout and straightforward fastenings minimise set-up time and make routine maintenance rapid, which supports higher machine uptime and more efficient shift planning. Supplied from Metav’s quality-filtered stock in Emmerich, the component arrives inspected and ready for integration. For reliable finishing with compact toolholders, contact Metav Werkzeuge to discuss the Teknik Makina face milling head T320TM and confirm compatibility with specific machines and inserts. Technical Data SKU: T320TM Manufacturer: Teknik Makina Article name: Planmesserkopf For inserts: for SNKX 1206 Indexable Inserts ECLASS: 21181015 Core specifications Max cutting diameter: 63 mm Mounting diameter: 22 mm Body diameter: 50 mm Overall length: 44 mm Number of cutting edges: 4 Cutting angle: 45° Weight: 0.593 kg Design and features Compatible insert manufacturers: Böhlerit, Korloy, Palbit Insert type: SNKX 1206 Torx screw: M4x12.5 Torx key size: T15 FAQ What insert type does the milling head accept? The milling head accepts SNKX 1206 indexable inserts and is compatible with inserts from Böhlerit, Korloy and Palbit. What is the maximum cutting diameter for this tool? The maximum cutting diameter is 63 mm, suitable for light to medium finishing passes. Which mounting diameter is required for installation? A 22 mm mounting diameter is required for the tool holder or arbor. How many cutting edges are fitted and what is the cutting angle? The head is arranged with four cutting edges and a 45° cutting angle to balance forces and improve surface finish. Which screw and key are needed for insert clamping? Insert clamping uses an M4x12.5 Torx screw and a T15 Torx key for secure and repeatable fixing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of reliable five cutting edges and a secure 22 mm shank for stable facing cycles and reduced changeover times; order the face-milling head directly via Metav Werkzeuge or consult our specialists for application advice. Planing cutter head T670TM – face-milling head for WNMX 09T3 indexable inserts (Teknik Makina) The Planing cutter head T670TM is a compact face-milling head engineered for secure insert clamping and precise facing on small to medium-sized machining centres. For WNMX 09T3 indexable inserts Ø50 mm head diameter Five cutting edges for longer runs Secure 22 mm shank mounting Precise facing with consistent chip control The compact face-milling head delivers repeatable surface results by combining a rigid body with five cutting edges, which spreads cutting load and extends uninterrupted operating time. The tool's Ø50 mm head diameter and optimised seat geometry help maintain consistent radial engagement, reducing vibration during light to medium facing operations. For machining centres where process stability is essential, this construct allows predictable tool behaviour and improved part-to-part consistency under standard conditions. Fast insert changes and secure clamping reduce downtime Designed for WNMX 09T3 indexable inserts, the insert pocket accepts commonly available grades and is held by an M3x7 Torx screw, tightened with a T8 key, ensuring both rapid changeover and secure retention. The combination of quick fastening and repeatable seating minimises set-up time and reduces the risk of incorrect indexing. This results in shorter non-cutting times and a smoother production rhythm when multiple inserts are required across a batch. Robust mounting for reliable toolholding The head is engineered with a 22 mm shank for positive, concentric mounting in standard toolholders. A compact overall length of 40 mm limits overhang, which helps reduce bending moments and improves stability during facing passes. The modest weight and balanced design contribute to lower spindle loads and predictable dynamic behaviour on typical shop-floor equipment, helping to extend both insert life and machine component longevity. Compatibility and straightforward maintenance Compatibility with Korloy-manufactured WNMX 09T3 inserts broadens grade options for specific materials and cutting conditions. The straightforward construction supports simple maintenance routines: regular inspection of the seat and torque control of the M3x7 fixing screw are sufficient to maintain performance. Where higher wear is expected, selecting an appropriate insert grade will extend service intervals and maintain surface quality. Discuss application requirements or request a tailored quote from Metav Werkzeuge for Teknik Makina's face-milling head T670TM to ensure optimal integration into existing tooling systems Technical data Article number: T670TM Name: Planing cutter head for WNMX 09T3 indexable inserts Manufacturer: Teknik Makina ECLASS: 21180902 Files: 62de7eb8148ec6b71020ff9c; 62de7dc7bd24461b3d5f79f6 Facts Diameter: 50 mm Cutting edges: 5 Overall length: 40 mm Shank diameter: 22 mm Weight: 0.329 kg Special features Compatible with WNMX 09T3 indexable inserts Compatible insert brand: Korloy Torx screw: M3x7 Torx key size: T8 FAQ How is the insert secured in the head? The insert is secured with an M3x7 Torx screw tightened using a T8 key; the T670TM's pocket and screw arrangement ensure positive clamping for WNMX 09T3 inserts. Which insert types are supported? This face-milling head is specified for WNMX 09T3 indexable inserts; compatibility with Korloy grades allows selection according to material and cutting parameters. What are the critical dimensions for mounting? Key mounting dimensions include a 22 mm shank diameter and an overall length of 40 mm; these values aid in selecting the correct toolholder and judging overhang. Is the head suitable for production runs? The T670TM's design—five cutting edges and a robust shank—supports longer runs with fewer interruptions, provided inserts and cutting data are matched to the application. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of high material‑removal capability and straightforward insert replacement for efficient face milling operations; the face milling head offers a stable Ø50 mm cutter body with a 22 mm shank and a 100° cutting angle — order directly via Metav Werkzeuge or ask our consultants for tailored advice. Face milling head T764TM — for 100° ENMX 0604 indexable inserts, Ø50 mm, Teknik Makina A face milling head T764TM engineered for reliable face milling with 100° ENMX 0604 indexable inserts, suitable for workshop and light production applications. 100° cutting angle for stable face milling Compatible with ENMX 0604 indexable inserts Ø50 mm head with 22 mm shank diameter Secured with M2.5×7 Torx screw, T8 key High‑throughput face milling with controlled cutting forces The head’s 100° cutting angle is designed to direct cutting forces favourably, which reduces axial load and enables consistent metal removal across the cutting arc. With 6 cutting edges distributed around the tool body and a compact Ø50 mm diameter, the assembly improves chip evacuation and promotes a stable cutting process. These mechanical characteristics translate into a measurable increase in throughput and a lower tendency for chatter, meaning more predictable cycle times on both benches and production machines. Secure clamping and quick insert changes for minimal downtime A precise 22 mm shank interface ensures repeatable mounting and alignment in standard toolholders; the insert seat accepts ENMX 0604 cartridges from YG-1 families, allowing fast indexable insert swaps without regrinding. The cutting insert is retained with an M2.5×7 Torx screw and serviced with a T8 key, which simplifies maintenance and reduces fixture time. Indexable inserts provide the benefit of quick edge renewal and consistent geometry, so downtime is shorter compared with regrindable cutters. Practical design that supports shop and production needs The compact design and clear mechanical interface make this head appropriate for shops requiring robust, repeatable face finishing. Built for routine handling and straightforward service, the component helps to standardise tooling sets and streamline inventory management. The use of established insert formats reduces the need for bespoke tooling stocks, and the stable cutter geometry supports consistent surface quality — a practical advantage when batch repeatability matters. Fit‑for‑purpose application and supplier support Intended for conventional face milling tasks where insert exchangeability and secure clamping are priorities, the head combines durable mechanics with easy servicing. For customers with specific material or process requirements, technical clarifications are available: Metav’s team can advise on insert grades, holder compatibility and machining parameters to match the production context. The component is manufactured by Teknik Makina and is supplied through Metav Werkzeuge to ensure controlled quality and timely delivery. For expert advice on integrating the Teknik Makina face milling head into existing tooling systems, contact Metav Werkzeuge for technical consultation at info@metav-werkzeuge.com or phone +49 2822 7131930 — our specialists will recommend the optimal insert grades and mounting options Technical data Article number: T764TM Manufacturer: Teknik Makina Product: Face milling head for 100° ENMX 0604 indexable inserts Torx screw: M2.5×7 Torx key size: T8 Core dimensions Head diameter: 50 mm Shank / mounting diameter: 22 mm Overall height: 50 mm Number of cutting edges: 6 Cutting angle: 100° Compatibility & features Compatible insert format: ENMX 0604 Recommended insert grade: YG1 (YG-1) Securing method: Torx screw M2.5×7 Key for servicing: T8 FAQ Which insert type fits this milling head? The milling head accepts ENMX 0604 indexable inserts; YG-1 grades are listed as compatible with the T764TM assembly. How is the insert secured and serviced? An M2.5×7 Torx screw fixes the insert; servicing is performed with a T8 key, enabling rapid insert changes without special tools. What are the main dimensions to check for holder compatibility? Check the Ø50 mm head diameter and the 22 mm shank diameter to ensure the head fits the intended holder and interface. How many cutting edges are available on the head? The head distributes cutting load over 6 cutting edges, supporting steady material removal and even wear. Who manufactures this face milling head and what is the SKU? The tool is produced by Teknik Makina and listed under SKU T764TM; supply and distribution are handled via Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high‑efficiency face cutter head that combines a 50 mm head diameter and eight cutting edges for consistent material removal; secure Torx clamping (T8 / M3x7) ensures reliable retention and short service times — order via Metav Werkzeuge or consult our specialists for application advice. Face cutter head for LNMX 0603 indexable inserts — Ø 50 mm, 8 cutting edges — Teknik Makina The face cutter head for LNMX 0603 indexable inserts is a compact milling solution designed for efficient face cutting and reliable chip evacuation across small to medium workshop milling tasks Suitable for LNMX 0603 indexable inserts Compact Ø 50 mm head profile Robust T8 Torx screws (M3x7) Eight cutting edges for steady material removal Improve cycle times with a compact Ø 50 mm head and stable cutting geometry The compact design of this face milling head delivers a high metal removal rate in a small footprint. With a 50 mm diameter and eight cutting edges, the tool distributes cutting forces evenly, which helps to reduce vibration and produce a consistent surface finish on flat faces. The result is fewer reworks and more predictable cycle times in series or single‑part production, making the head a practical choice where space and process repeatability are priorities. Minimise downtime through secure clamping and simple maintenance Clamping is executed with T8 Torx drive screws and M3x7 fixings, which allow for repeatable tightening without cam‑out. The solid retention system is matched to a shank 22 mm connection for stable mounting in standard toolholders. Quick, tool‑friendly maintenance reduces non‑productive time: worn indexable inserts are replaced rapidly, while the head itself requires minimal intervention, supporting continuous machine availability. Flexible sourcing and clear indexable insert compatibility Designed for LNMX 0603 indexable inserts and compatible with inserts from Korloy, the cutter head offers flexibility in procurement and tool planning. Using indexable inserts simplifies inventory management and enables selective geometry choices for different materials. The modular approach also allows for targeted cost control: facing operations can be optimised by selecting the right LNMX 0603 grade for aluminium, steel or harder workpieces. Practical advantages for everyday workshop use Built for straightforward integration, the head combines a compact profile with robust construction suited to the demands of everyday machining. The balanced design reduces the need for excessive fixturing while still delivering dependable cutting performance. Paired with the supply and quality assurance behind Teknik Makina, this tool head supports reliable process setups and long‑term productivity in a production environment. Contact Metav Werkzeuge for application guidance and supply from Emmerich; specialists will advise on fitting the Teknik Makina face cutter head (SKU T837TM) to specific machining tasks Technical data SKU: T837TM Product: Face cutter head for LNMX 0603 indexable inserts Manufacturer: Teknik Makina Core dimensions Diameter: 50 mm Overall height: 40 mm Shank diameter (connection): 22 mm Cutting edges: 8 Special features Compatible with LNMX 0603 indexable inserts Compatible with Korloy inserts Torx key: T8 Torx screw: M3x7 Suited for face milling operations FAQ Which insert size is required for this cutter head? The head accepts LNMX 0603 indexable inserts; the geometry and clamping are specified for that insert size and compatible Korloy equivalents. How is the cutter head mounted to the toolholder? Mounting uses a 22 mm shank connection and the head is secured with T8 Torx driven screws (M3x7) for repeatable retention. How many cutting edges does the head provide and what is the benefit? The head is equipped with eight cutting edges, which evens out cutting forces and improves surface finish while extending time between index changes. Are replacement inserts widely available? Yes, LNMX 0603 indexable inserts are common in the market and the head is compatible with Korloy inserts, simplifying procurement and reducing lead times. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Product Technical Specifications: Order Number: T196TM Item: Face Mill usable with ZDEW 1204 Indexable Inserts the Hersteller's Pramet Brand: Teknik Makina Structural Details: Diameter: 50mm Cutting Edges: 4 Weight: 0.256kg Total length: 40mm Diameter Connection: 22mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Take advantage of the combination of high process reliability through internal coolant, straightforward insert replacement with RDMT 1003 indexable inserts and a compact 50 mm diameter for consistent surface results — order directly via Metav Werkzeuge or consult our specialists for application advice. Round insert face mill by Teknik Makina — 50 mm diameter with internal coolant Round insert face mill for efficient face milling in indexable-insert tooling applications 50 mm diameter for stable surface finishing Internal coolant for improved chip evacuation Compatible with RDMT 1003 indexable inserts Five cutting edges for continuous material removal Higher throughput from indexable insert technology The combination of a 50 mm cutter body and compatibility with RDMT 1003 indexable inserts turns interrupted cuts and programme changes into manageable tasks. Using replaceable carbide inserts reduces downtime because individual cutting edges are exchanged instead of replacing the whole tool, which improves machine utilisation. The five cutting edges configuration supports steady material removal and helps maintain feed rates without frequent tool changeovers, contributing directly to predictable production rhythms. Process stability and cooling where it matters Built with internal coolant, the tool ensures coolant delivery close to the cutting zones, which reduces heat build-up and promotes reliable chip control. This targeted cooling supports longer insert life and more consistent surface quality under continuous operation. For workshops aiming to improve cycle consistency, the internal coolant feature also decreases the risk of edge chipping in heavy or interrupted cuts, translating into fewer rejects and a more stable manufacturing process. Compact, workshop-ready design for versatile use With an overall length of L40 mm and a compact mass of 0.302 kg, the cutter body offers a practical balance between rigidity and handling ease. The compact format is advantageous for shallow face milling and constrained setups where overhang must be minimised. The robust construction from Teknik Makina is intended for everyday industrial use; the tool’s dimensions and mass help reduce vibration and support fine surface finishes while fitting into standard toolholders used in milling centres. Practical handling, assembly and maintenance Assembly and maintenance are straightforward: fixing screws are M3.5x8.5 and the prescribed Torx driver size is T15, which simplifies insert changes and routine checks. Keeping the coolant channels clear and using the correct torque when fitting inserts ensures optimal performance and longevity. If additional technical parameters are required for integration into bespoke setups, Metav Werkzeuge’s technical team can provide data or application guidance to ensure compatibility with existing fixtures and machines. Contact Metav Werkzeuge for tailored application advice and secure supply of Teknik Makina round insert face mills with internal coolant — expert guidance from our Emmerich hub is just a call or e‑mail away. Technical data Article number: T291-1TM SKU: T291-1TM ECLASS: 21180902 Manufacturer: Teknik Makina Facts Diameter: 50 mm Overall length: 40 mm Weight: 0.302 kg Cutting edges: 5 Torx key: T15 Torx screw: M3.5x8.5 Special features Internal coolant Compatible with RDMT 1003 indexable inserts Product type: Round insert face mill FAQ Which inserts are compatible with this face mill? The face mill accepts RDMT 1003 indexable inserts; the cutter body is designed to locate and clamp those inserts securely for reliable operation. Is the coolant internal or external on the cutter? Internal coolant is integrated into the cutter body to deliver cooling directly to the cutting zone, improving chip control and insert life. How many cutting edges does the cutter provide? The tool is supplied with a design that accommodates five cutting edges, enabling continuous cutting performance before insert rotation or replacement is required. What torque and driver size are needed to change inserts? Use a T15 Torx driver with the M3.5x8.5 fixing screws; proper torque and clean screw threads are important for secure clamping and consistent tool behaviour. Is this cutter suitable for compact setups with limited overhang? Yes, with an overall length of L40 mm and a compact mass of 0.302 kg, the design helps to reduce overhang and vibration in confined tool arrangements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine robust cutting performance with straightforward maintenance: the 50 mm diameter milling head, compatible with RDMT 1204 indexable inserts, and its five cutting edges enable efficient face milling with predictable tool changes; order directly via Metav Werkzeuge or consult their specialists for technical advice. Round insert milling head for RDMT 1204 indexable inserts — 50 mm, L40 mm (Teknik Makina) The Round insert milling head provides a compact, indexable solution for face milling applications where quick insert changes and consistent surface finishes are required. 50 mm diameter for broad face milling Compatible with RDMT 1204 indexable inserts Five cutting edges for improved productivity Secured with M3.5x8.5 Torx T15 screws Achieve higher throughput with proven indexable technology The design focuses on measurable productivity gains: with a 50 mm diameter and five cutting edges, material removal can be distributed across multiple cutting edges, reducing the load per edge and allowing predictable wear cycles. Compatibility with RDMT 1204 indexable inserts means inserts can be rotated or replaced without regrinding the tool body, so downtime is minimised and spindle utilisation is improved. This technical approach supports efficient batch processing and repetitive face milling tasks in production environments. Secure fastening and compact geometry for stable machining A compact overall length of 40 mm overall length and a mass of 0.311 kg yield a stable, low‑overhang setup that reduces vibration in face milling operations. The cutting head is fastened with M3.5x8.5 Torx screws and requires a T15 Torx key, ensuring repeatable clamping torque and secure insert retention. These mechanical details translate into consistent cutting conditions, easier tool handling during insert changes and predictable seating of each insert, which in turn supports consistent surface quality on workpieces. Versatile application scope and simplified tool management Designed as a face milling head (Planmesserkopf), this component is suited for producing flat surfaces and light planing operations when fitted with appropriate inserts. Using indexable inserts reduces the number of tool bodies required on the shop floor, as multiple wear positions are available per insert type. The product labelled 50mm Rundplattenfräser RDMT 1204 L40mm and listed as T140TM integrates into established tooling systems and supports standard maintenance routines—spare inserts and the specified Torx screws are straightforward to source and replace, keeping process continuity high. For tailored procurement or advice on integrating this Teknik Makina face milling head into existing setups, contact Metav Werkzeuge — their consultants can advise on insert selection and delivery from Emmerich. Technical Data Article number: T140TM Label: 50mm Rundplattenfräser RDMT 1204 L40mm Manufacturer: Teknik Makina Facts Diameter: 50 mm Overall length: 40 mm Weight: 0.311 kg Number of cutting edges: 5 eClass: 21180902 Special features Compatible with RDMT 1204 indexable inserts Securing screw: M3.5x8.5 Required Torx key: T15 Product type: face milling head (Planmesserkopf) FAQ Which inserts are compatible with this milling head? The head accepts RDMT 1204 indexable inserts, which are specified for this round insert milling head and allow indexable replacements when wear is reached. How many cutting edges does the cutter provide? The milling head is configured with five cutting edges, enabling distributed wear and longer service intervals before insert rotation or replacement. What fasteners are used to secure the inserts? Inserts are retained with M3.5x8.5 Torx screws tightened using a T15 Torx key to ensure consistent clamping. What are the primary applications for this tool? This face milling head is intended for producing flat surfaces and light planing operations in workshop and production settings when equipped with the correct inserts. What is the product SKU and who manufactures it? The cutter is listed under SKU T140TM and is manufactured by Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from a compact, high-stability cutter that combines a Ø50 mm cutting diameter with a 22 mm shank and four cutting edges for efficient tool changes; order the tool directly via Metav Werkzeuge or ask the consultants for application advice. Indexable Face Mill T282TM – for RDMT 12T3 indexable inserts, Ø50 mm, 4 cutting edges A robust Indexable Face Mill T282TM engineered for precise milling tasks using RDMT 12T3 indexable inserts, suitable for compact set-ups and standard toolholders. Suitable for RDMT 12T3 indexable inserts Ø50 mm cutting diameter for compact machining Four cutting edges for stable material removal 22 mm shank for standard toolholders Greater cutting stability from a compact design The cutter delivers consistent engagement thanks to its Ø50 mm diameter and four cutting edges, which combine to spread cutting forces and reduce vibration during face milling. This design reduces the need for frequent tool corrections and supports steady metal removal, leading to improved process reliability. The presented geometry supports predictable performance in short-reach machining tasks where rigidity and balance are essential, making the tool a pragmatic choice for repetitive operations that demand minimal setup time and consistent component quality. Quick insert changes and secure fastening for reduced downtime Insert retention is achieved with a M3.5 locking screw and a M3.5×8.5 Torx screw, secured with a T15 key for straightforward maintenance. This fastening combination enables rapid indexable insert replacement with reproducible clamping, which shortens maintenance cycles and helps maintain stable cutting conditions. The clear mechanical interface allows operators to replace worn inserts with minimal adjustment, translating into measurable savings in machine idle time and making the cutter a practical asset in production-focused toolrooms. Smooth integration into standard toolholders and tight assemblies With a 22 mm shank and a total length of 40 mm, the tool is sized for compatibility with common toolholders and compact machining envelopes. The modest weight of 0.311 kg contributes to balanced spindle behaviour and is advantageous in applications where reduced overhang is required. Designed around standard indexable inserts, the cutter eases inventory management by using the widely available RDMT 12T3 grade, supporting streamlined logistics and quicker changeover in busy workshops without the need for specialised adaptors. For secure procurement and application support for the T282TM, contact Metav Werkzeuge to discuss suitability for specific setups and to arrange delivery — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: T282TM Manufacturer: Teknik Makina ECLASS: 21180902 ETIM: EC011860 Facts Diameter: 50 mm Cutting edges: 4 Shank diameter: 22 mm Total length: 40 mm Weight: 0.311 kg Special features for RDMT 12T3 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key size: T15 FAQ Which inserts are compatible with this cutter? The cutter is designed for RDMT 12T3 indexable inserts; these inserts fit the T282TM mounting and can be indexed or replaced as required. What fastening tools are required to change inserts? Insert retention uses an M3.5 locking screw and an M3.5x8.5 Torx screw; a T15 Torx key is used for secure tightening. Which shank size is required for mounting? The tool has a 22 mm shank diameter and is intended for standard holders that accept a 22 mm taper or collet. Is the cutter suitable for compact machining set-ups? Yes. The modest total length of 40 mm and a weight of 0.311 kg make it appropriate for tight assemblies and short overhang conditions. How many cutting edges are available per tool? The tool features four cutting edges, enabling balanced cutting action and stable engagement during face milling operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact 50 mm diameter and built‑in coolant deliver consistent chip control and improved tool life, while compatibility with RDMT 12T3 indexable inserts and four cutting edges ensure stable material removal in CNC operations. Order directly via Metav Werkzeuge or consult our application specialists for tailored machining advice. Round insert milling cutter RDMT 12T3 (T282-1TM) – 50 mm, internal coolant | Teknik Makina Round insert milling cutter for indexable‑insert face and shoulder milling with internal coolant, designed for reliable performance in CNC machining centres 50 mm diameter for compact machining Internal coolant for improved chip evacuation Compatible with RDMT 12T3 indexable inserts Four cutting edges for stable material removal High productivity from a compact cutter The 50 mm tool diameter combined with four cutting edges offers a balanced mix of rigidity and material removal rate. Using an indexable system reduces downtime: inserts can be changed without regrinding, so cycle time is minimised and splice‑to‑splice accuracy is maintained. For operations that require predictable tool behaviour, the combination of compact dimensions and repeatable insert seating delivers consistent surface finish and dimensional stability on each pass. Coolant through the body for thermal control and chip management Built‑in internal coolant channels direct cutting fluid close to the cutting zone for efficient cooling and flushing. This reduces heat build‑up at the cutting edge and helps prevent built‑up edge, extending insert life and preserving edge geometry. Improved chip evacuation lowers the risk of recutting and minimises downtime caused by chip packing, which is especially beneficial in pocketing and trochoidal milling strategies on multi‑axis machines. Serviceable clamping and workshop convenience Assembly and maintenance are straightforward thanks to the T15 Torx key interface and M3.5x8.5 Torx screws, enabling secure clamping and quick insert changes with standard workshop tools. The 40 mm overall length and modest mass of 0.311 kg support stable spindle dynamics and simple handling during set‑up. Using standardised fasteners and a familiar key type reduces training needs and keeps maintenance predictable across the tool fleet. Suitable integration and supply reliability Designed for compatibility with RDMT 12T3 indexable inserts, this cutter fits established insert inventories and grinding cycles, simplifying stock management. Manufactured by Teknik Makina and supplied via Metav Werkzeuge, the tool benefits from a European supply chain that emphasises dependable delivery and consistent quality control. For operations seeking a compact, coolant‑equipped solution for face and shoulder milling, this cutter represents a pragmatic choice that balances productivity and serviceability. For application advice or to secure supply of the Teknik Makina 50 mm round insert milling cutter (T282-1TM) with internal coolant, contact Metav Werkzeuge GmbH at +49 2822 7131930 or info@metav-werkzeuge.com to discuss suitability for specific machining tasks. Technical data Article number: T282-1TM Manufacturer: Teknik Makina Product type: Round insert milling cutter Compatible inserts: RDMT 12T3 Internal coolant: Yes Torx key: T15 Torx screw: M3.5x8.5 Core specifications Diameter: 50 mm Overall length: 40 mm Cutting edges: 4 Weight: 0.311 kg eClass: 21180902 Special features Internal coolant Compatibility with RDMT 12T3 indexable inserts Requires T15 Torx key Torx screw M3.5x8.5 Compact design for CNC machining centres FAQ Which inserts fit this milling cutter? The cutter is compatible with RDMT 12T3 indexable inserts; their standardised geometry allows quick replacement and predictable seating. Does the tool have internal coolant? Yes, the internal coolant channels are incorporated to improve cooling and chip evacuation during milling. What key and screws are required for insert changes? Insert clamping uses a T15 Torx key and M3.5x8.5 Torx screws for secure fastening. Is the cutter suitable for multi‑axis CNC machines? The compact 50 mm diameter and 40 mm overall length make the cutter well suited to many multi‑axis CNC setups where accessibility and spindle dynamics matter. How heavy is the tool and how does that affect handling? At 0.311 kg, the tool is lightweight for its class, aiding rapid handling and reducing inertia effects during rapid repositioning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compact Ø50 mm head, five cutting edges and secure M3.5 clamping for efficient, low-downtime milling; order supply or request technical advice via Metav Werkzeuge for fast delivery and expert support. Indexable round cutter T604TM — 50 mm diameter, 5 cutting edges, by Teknik Makina The Indexable round cutter T604TM is a compact indexable round cutter designed for use with RHKW 1003 indexable inserts, suited to precise finishing where a small, robust milling head is required. Indexable cutter for RHKW 1003 inserts Ø50 mm diameter for compact milling heads Five cutting edges for prolonged tool life Secure M3.5 clamping with M4x10 Torx screw Increased productivity from a compact 50 mm head The compact Ø50 mm diameter paired with five cutting edges delivers a favourable balance between material removal and tool life. By distributing wear across multiple edges, the cutter reduces the frequency of index changes and supports longer uninterrupted runs. This design is particularly relevant where compact tool envelopes or close-tolerance features are involved, as the smaller head minimises overhang while maintaining effective cutting engagement. Reliable clamping and rapid insert changes A secure clamping concept, featuring an M3.5 clamping screw and an M4x10 Torx screw tightened with a T15 key, ensures repeatable insert seating and consistent cutting geometry. The combination of standard fasteners and a defined torque procedure reduces the risk of insert movement under load and shortens maintenance interventions. Compatibility with RHKW 1003 indexable inserts, including those from Ingersoll, simplifies inventory and replacement logistics. Stable mounting for consistent accuracy With a 22 mm shank diameter and an overall length of 40 mm, the tool offers a compact yet rigid interface that helps to reduce runout and vibration at the toolholder. The low mass (approx. 0.289 kg) contributes to dynamic stability and can improve surface finish by lowering chatter tendencies. These attributes support repeatable results across batches and make the cutter suitable where dimensional consistency is required. Support and supply through the Metav network Sourced from Teknik Makina and distributed via Metav Werkzeuge, the T604TM benefits from an established supply chain and parts availability. Technical documentation and replacement fasteners are readily accessible, and the Metav network provides pragmatic purchasing and delivery options from Emmerich. This combination of manufacturer engineering and distributor support helps to reduce procurement complexity and ensures reliable replenishment of consumables. Contact Metav Werkzeuge for tailored technical advice on the T604TM, availability and fast delivery from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: T604TM Diameter: 50 mm Cutting edges: 5 Overall length: 40 mm Shank diameter: 22 mm Weight: 0.289 kg Compatible inserts: RHKW 1003 Compatible insert manufacturer: Ingersoll Torx screw: M4x10 Torx key: T15 Clamping screw: M3.5 Facts Ø50 mm 5 cutting edges 40 mm overall length 22 mm shank 0.289 kg weight Special features Indexable design for RHKW 1003 inserts Secure clamping with standard fasteners Compact tool envelope for tight spaces Supplied by Teknik Makina via Metav Werkzeuge FAQ Which inserts fit the T604TM? The T604TM is designed for RHKW 1003 indexable inserts and accepts inserts compatible with the Ingersoll geometry specified for this cutter. How are inserts secured in the cutter? Inserts are retained using an M3.5 clamping screw and an M4x10 Torx screw; tightening is performed with a T15 key to ensure consistent seating. What interface does the cutter use for mounting? The cutter has a 22 mm shank diameter and a 40 mm overall length, giving a compact, rigid interface suitable for standard toolholders that accept a 22 mm shank. How does the five-edge configuration benefit production? The five-edge arrangement spreads wear across multiple cutting edges, extending time between indexing operations and reducing tool change frequency for improved uptime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust cutting solution that combines quick insert changes, compact dimensions and dependable clamping. Compatible with Palbit RNHX 1204 indexable inserts and featuring a Ø 50 mm cutter body with a 22 mm shank, this tool streamlines tool changeover and keeps cycles efficient — order directly via Metav Werkzeuge or consult our specialists for application advice. Round insert milling cutter for RNHX 1204 indexable inserts – Ø 50 mm, Teknik Makina The Round insert milling cutter designed for RNHX 1204 indexable inserts delivers precise peripheral milling in compact setups and is suitable for machines with a 22 mm tool holder. Compatible with Palbit RNHX 1204 inserts Ø 50 mm cutter body for compact machining Secure Torx fixing M4x10, key size T15 Five cutting edges for stable material removal High-precision cutting with a proven insert system This cutter is built around the RNHX 1204 insert form, allowing users to exploit the economy of indexable tooling while maintaining consistent geometry. Using standardised indexable inserts reduces setup time and tooling costs: worn edges are restored by a simple index or replacement of the insert rather than regrinding a tool. The compatibility with Palbit inserts ensures a broad selection of grades and chipbreakers for different workpiece materials, so the cutter performs reliably across varied daily production tasks. Secure clamping and straightforward serviceability Clamping is executed via an M4x10 Torx screw and requires a T15 key, guaranteeing repeatable seating and fast servicing. The central Torx fixation gives clear torque points, which lowers the risk of insert movement under cutting forces and keeps vibration to a minimum. Routine maintenance is simple: the Torx interface enables quick access to the insert seat for inspection or replacement, reducing machine downtime and supporting continuous production. Compact form for versatile machine integration With a Ø 50 mm cutting diameter, 22 mm shank diameter and a 40 mm overall length, this cutter is tailored to confined tool stations and machines that prioritise rigidity. The design with 5 cutting edges balances material removal rate and vibration damping; the modest mass (approx. 0.284 kg) contributes to lower spindle load and improved balance at higher speeds. These dimensions make the cutter a practical choice where space is limited but repeatable, accurate milling is required. Practical benefits for procurement and workshop planning Selecting tools that match existing insert systems simplifies stock keeping and reduces the number of unique spares required. The combination of standardised inserts and a compact cutter body supports predictable tooling costs and faster turnaround on minor repairs. For operations seeking consistent throughput and easy serviceability, this TekniK Makina tool offers a focused solution that integrates into common CNC tool holders with minimal adaptation. Arrange a specification check for the Teknik Makina round insert milling cutter with Metav Werkzeuge in Emmerich for tailored fitment guidance and assured supply from our European distribution hub. Technical data Article number: T661TM ECLASS: 21180902 ETIM: EC011860 Brand: Teknik Makina Suitable for inserts: Palbit RNHX 1204 Fixing screw: M4x10 Torx key size: T15 Data Cutter diameter: 50 mm Shank diameter: 22 mm Overall length: 40 mm Cutting edges: 5 Weight: 0.284 kg Special features Compatibility: RNHX 1204 indexable inserts Fixing system: Torx screw M4x10, T15 key Intended use: indexable insert milling Manufacturer SKU: T661TM FAQ What insert type does the cutter accept? The cutter accepts RNHX 1204 indexable inserts produced by Palbit and other compatible manufacturers designed to that geometry. Which toolholder diameter is required for safe mounting? A toolholder with a 22 mm bore or collet is suitable for mounting this cutter; the 22 mm shank ensures a secure fit and good rigidity. How are the inserts secured in place? Inserts are clamped with an M4x10 Torx screw; the screw is accessed and tightened using a T15 Torx key for repeatable seating. How many cutting edges does the cutter provide and what is the benefit? The cutter has 5 cutting edges, which helps distribute cutting forces and provides smoother material removal compared with fewer-edge variants. Is the cutter suitable for compact machining setups? Yes, the compact Ø 50 mm body and 40 mm overall length make it well suited to restricted tool stations and machines where space and rigidity are critical. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precision-focused cutter that combines a 50 mm diameter with a secure 22 mm shank for reliable face milling; the compatibility with RPMW 10T3 indexable inserts and standard Torx fastenings keeps downtime to a minimum. Order direct via Metav Werkzeuge or consult the technical team for application advice. Rundplattenfräser — Face mill for RPMW 10T3 indexable inserts, Ø50 mm | Teknik Makina The Rundplattenfräser is a compact face milling cutter engineered for precise finishing and short-run production, designed to accept RPMW 10T3 indexable inserts for efficient material removal in workshop and light industrial environments Ø50 mm cutting diameter for compact operations 22 mm shank for secure toolholder fit 6 effective cutting edges for smooth finishes Compatible with RPMW 10T3 inserts (Korloy) Compact diameter that increases accessibility and cycle efficiency With a Ø50 mm cutting diameter the tool is ideal where space is limited but consistent performance is required. The small footprint enables shorter overhangs and reduced vibration, which directly contributes to improved surface finish and longer insert life. The 22 mm shank provides a stable connection to common toolholders, reducing chatter and ensuring repeatable results across batches. This balance of compact size and rigidity supports productive machining on vertical and horizontal milling machines where accessibility is a priority. Secure clamping and standardised insert handling to reduce downtime Clamping is simplified by the use of standard fastenings: a T15 Torx key is used with M3.5x8.5 screws for quick, repeatable insert replacement. Compatibility with widely used Korloy RPMW 10T3 inserts means readily available cutting grades and geometries, lowering logistics complexity and expense. The standard tooling interface cuts maintenance time and helps keep the production line moving, delivering a measurable improvement in machine uptime and process economy. Predictable finishes and economical cutting with indexable inserts Equipped for six indexable cutting edges, the cutter offers multiple effective edges before a regrind or replacement is required, which improves cost per cutting edge versus brazed tools. Using indexable inserts allows the user to select grades tailored to the application—whether the priority is long tool life or improved edge stability for finer finishing. The result is a consistent workpiece appearance and repeatable dimensional control across production runs, especially in small-batch or mixed-material environments. Practical integration into workshop workflows and toolrooms The tool is intended for light to medium face milling tasks and integrates into existing tooling systems without complex adaptation. Its compact design and standardised insert type support straightforward inventory management and rapid tool change procedures. Technical teams will value the familiar RPMW 10T3 format and the straightforward Torx fastening, while purchasing benefits from predictable reordering and compatibility with common insert suppliers. For applications requiring clear material guidance, the cutter’s designation and insert choice should be matched to the workpiece material and cutting conditions. For application-specific advice or to place an enquiry for the Teknik Makina face mill, contact Metav Werkzeuge for tailored guidance and supply from Emmerich—eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and lead times Technical data SKU: T707TM Manufacturer: Teknik Makina Article name: Rundplattenfräser for RPMW 10T3 Indexable Inserts Facts Cutting diameter: 50 mm Shank diameter (D): 22 mm Overall height: 40 mm Number of cutting edges: 6 Special features Compatible with RPMW 10T3 indexable inserts Suitable insert supplier: Korloy Torx key: T15 Torx screw: M3.5x8.5 FAQ Which insert type fits this cutter? The cutter accepts RPMW 10T3 indexable inserts; standard RPMW geometry from Korloy is suitable and widely available. How many inserts are mounted on the cutter? The design provides six cutting positions, giving multiple effective edges for economical operation. What shank diameter is required for the toolholder? A 22 mm shank diameter is specified for secure mounting in compatible toolholders. Which Torx key size is needed for insert changes? Insert clamping uses a T15 Torx key with M3.5x8.5 screws for repeatable fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Detailed Technical Data: Order Number: T423TM Item: Face Mill usable with R390-1806 Indexable Inserts the Hersteller's Sandvik Brand: Teknik Makina Numbers and Data: Diameter: 50mm Cutting Edges: 4 Weight: 0.303kg Total length: 45mm Diameter Connection: 22mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Benefit from precise material removal, integrated internal coolant and broad compatibility with RDMT 12T3 indexable inserts for reliable face milling performance. Order the cutter directly via Metav Werkzeuge or consult our technical advisers for application-specific guidance. Indexable face mill T283-1TM — 50 mm, internal coolant (Teknik Makina) Indexable face mill T283-1TM engineered for compact, high-efficiency face milling with RDMT 12T3 inserts and through-coolant for stable metalworking across a range of steels and non-ferrous materials 50 mm diameter for compact face milling Internal through-coolant for improved chip control Compatible with RDMT 12T3 indexable inserts Five cutting edges for high material removal rates High productivity from a compact cutter head The compact 50 mm diameter head delivers a high removal rate in confined setups while keeping cycle times low. Fitted for RDMT 12T3 indexable inserts, this cutter enables quick insert changes and consistent geometry across operations, reducing setup time and improving run-to-run repeatability. The combination of a short 40 mm overall length and a balanced cutter body supports stable cuts on vertical milling heads and smaller machining centres, translating into higher throughput without compromising surface finish or dimensional accuracy. Coolant-fed design for longer tool life and cleaner process An integrated internal coolant channel directs fluid to the cutting zone, improving temperature control and stable chip control during interrupted cuts. This feature reduces thermal wear on the insert edges and helps maintain consistent cutting conditions, which lowers the frequency of regrinds and insert changes. In practice, the coolant-fed design contributes to predictable tool life and fewer scrap parts, making the head especially suitable for more demanding production runs where process stability is essential. Serviceable fastenings and robust connection details Mechanical details are designed for straightforward maintenance: the cutter uses T15 Torx fastening and M3.5x8.5 screws for secure clamping of the inserts, facilitating safe and fast replacement. The body mass of approximately 0.309 kg and the balanced layout minimise vibration at moderate spindle speeds, supporting repeatable surface quality. For shops standardising on indexable systems, this head adds a compact option that pairs efficient chip evacuation with reliable mechanical interfaces for day-to-day workshop use. For machining applications requiring compact, coolant-fed face milling heads, contact Metav Werkzeuge to discuss the Teknik Makina indexable face mill T283-1TM and its suitability for specific materials and setups; reach us at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: T283-1TM Product type: Indexable face mill Brand: Teknik Makina ECLASS: 21180902 Core specifications Diameter: 50 mm Overall length: 40 mm Weight: 0.309 kg Number of cutting positions: 5 Features & compatibility Internal through-coolant Compatible with RDMT 12T3 indexable inserts Fastening: T15 Torx key Screws: M3.5x8.5 Category: Face milling head (Planmesserkopf) FAQ Which insert type fits the cutter? The head is designed for RDMT 12T3 indexable inserts; this compatibility ensures standard insert geometries and simple clamping for the Teknik Makina T283-1TM. Is the cutter suitable for use with coolant-through spindles? Yes — the integrated internal coolant channel on the face mill supports coolant delivery from the tool body into the cutting zone, improving chip control and tool life. How many inserts are used and how does that affect productivity? The cutter accepts five inserts; the multiple cutting positions increase material removal capacity per revolution and help maintain surface finish in interrupted or heavy cuts. What fastening tools are required for insert changes? Insert clamping uses a T15 Torx drive and M3.5x8.5 screws, enabling quick and secure replacement of RDMT 12T3 inserts on the T283-1TM. Can the head be used on smaller machining centres? The compact 50 mm diameter and 40 mm overall length make this face milling head suitable for smaller machining centres and tight fixturing arrangements while preserving stable cutting performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com