Gibt es einen Hahn und Kolb Online Shop?

Combining a compact 50 mm diameter with internal cooling and a secure T15/M4x10 clamping system delivers dependable machining performance and reduced downtime. Take advantage of the efficient use of AP-- 1604 indexable inserts and order the corner head directly via Metav Werkzeuge or consult our specialists for application advice. Corner head – 50 mm indexable head with internal coolant by Teknik Makina Corner head for AP-- 1604 indexable inserts, engineered for precise shoulder turning and compact machining in demanding workshop environments 50 mm diameter for compact machining Internal coolant for improved tool life Compatible with Korloy AP-- 1604 inserts Requires T15 Torx and M4x10 screw Compact design for precise shoulder and profiling work The Corner head combines a small footprint with a stable tool geometry to support accurate shoulder turning and profiling operations in confined setups. With a 50 mm nominal diameter and 45 mm overall length the head is designed to fit tight tool turrets and short overhang situations, reducing vibration and improving surface finish. The 90° cutting angle provides consistent engagement for square shoulders and profile details, while the modest 0.406 kg mass helps maintain toolsetter settings and repeatability across batch runs. Coolant-fed routing to prolong insert life and improve process reliability An integrated internal coolant channel supplies cutting fluid close to the cutting zone, which aids chip evacuation and thermal control. For indexable tooling systems such as AP-- 1604 inserts this means more stable cutting conditions and extended insert life, thereby lowering tooling costs per part. The coolant-fed design also helps maintain a consistent cutting edge temperature, reducing the risk of built-up edge and improving dimensional stability on longer cycles. Fast indexing and secure clamping for minimal downtime The head accepts inserts with 4 cutting edges, enabling quick indexing and longer intervals between insert changes—this reduces machine downtime and increases productive cutting time. Clamping is executed with a T15 Torx key and an M4x10 fixing screw, offering reliable repeatable torque and simple serviceability at the bench. The combination of secure fastening and multiple usable edges supports predictable maintenance intervals and efficient workshop workflows. Compatibility and workshop integration for diverse production needs Engineered for compatibility with Korloy AP-- 1604 indexable inserts, this corner head suits industrial and trade machining contexts where standardised insert families simplify inventory. The head’s compact form factor and coolant capability make it well suited to series turning, profiling, and shoulder finishing tasks in small-batch and mixed-production environments. If further technical data or application guidance is required, Metav’s technical team is available by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Discuss application requirements with Metav Werkzeuge to secure the right Teknik Makina corner head for your workshop and ensure prompt supply from Emmerich. Technical data Article number: T182-1TM Product type: Corner head Manufacturer: Teknik Makina ECLASS: 21181015 Facts Diameter: 50 mm Overall length: 45 mm Weight: 0.406 kg Cutting edges: 4 Cutting angle: 90° Special features Internal coolant Compatible with Korloy AP-- 1604 indexable inserts Torx key: T15 Fixing screw: M4x10 FAQ Which inserts fit this corner head? The corner head is compatible with AP-- 1604 indexable inserts from Korloy and is intended for use with that insert family. Does the head support internal coolant supply? Yes, the head features internal coolant, routed to the cutting zone to assist chip evacuation and thermal control. What are the key dimensions for machine setup? Key dimensions are 50 mm diameter and 45 mm overall length; the cutting angle is 90° which supports shoulder operations. How many usable cutting edges are available per insert? The system is designed for inserts with 4 cutting edges, enabling multiple indexings before replacement. What fastening tools are required for maintenance? Service and clamping use a T15 Torx key and an M4x10 fixing screw as specified. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise 90° cutting geometry combined with internal coolant and a compact 50 mm head for stable shoulder milling and consistent surface finish. The 45 mm overall length and compatibility with APMT 1604 indexable inserts deliver flexible tooling choices and reliable chip control. Order the square shoulder milling head directly via Metav Werkzeuge or ask our consultants if needed. Square shoulder milling head for APMT 1604 – 50 mm, internal coolant (Teknik Makina) The square shoulder milling head for APMT 1604 indexable inserts provides robust 90° cutting geometry and integrated internal coolant for demanding shoulder and face-milling operations 50 mm head diameter for compact set-ups 90° cutting geometry for square shoulders Inner coolant for efficient chip evacuation Compatible with APMT 1604 inserts by Korloy Achieve repeatable square shoulders with controlled cutting forces The compact square shoulder milling head delivers a consistent 90° engagement that reduces rework and simplifies fixture set-up. The combination of a 50 mm head diameter and a short overall length of 45 mm minimises overhang, which in turn lowers bending moments and vibration during milling. This yields a more stable cutting process and higher first-pass accuracy for shoulder faces, particularly in batch production and precision jobbing. Compatibility with APMT 1604 inserts ensures wide availability of grades and edge geometries for various steels and non-ferrous materials. Coolant-through design improves tool life and surface finish Integrated internal coolant directs cutting fluid to the primary cutting edge for improved chip evacuation and quicker heat dissipation, resulting in reduced crater wear and more consistent tool life. Fastener details such as the M4x10 Torx screw and Torx T15 drive allow secure clamping and straightforward insert changes with standard tooling. The head’s design supports efficient chip flow from the cutting zone, which helps maintain surface integrity and reduces the risk of built-up edge when machining demanding alloys. Built for flexible workshop integration and quick insert changes Manufactured by Teknik Makina, this indexable head accepts APMT 1604 inserts produced by Korloy, enabling shops to use readily available insert grades and control inventory. The use of standard Torx fastening simplifies service routines and minimises downtime during insert replacement. For compact milling cells and multi-spindle arrangements, the head’s configuration and standard fixing components support straightforward integration and predictable maintenance intervals. Suitable applications and process advantages Ideal for square-shoulder milling, slotting near shoulders and finishing operations, the head provides a balance of rigidity and accessibility in confined set-ups. The coolant-through capability and standardised insert interface support high-volume production where repeatability and tool-change efficiency are priorities. When paired with suitable insert grades, the head is a practical choice for finishing carbon steels, alloyed steels and many everyday workshop materials, delivering a dependable combination of productivity and predictable tool life. For precise advice on integrating the Teknik Makina square shoulder milling head (SKU T243-1TM) into existing tooling systems and to secure supply via Metav Werkzeuge in Emmerich, contact Metav Werkzeuge by e-mail or phone for tailored recommendations Technical data Article number: T243-1TM SKU: T243-1TM ECLASS: 21181015 Product type: Square shoulder milling head Label: 50mm Eckmesserkopf APMT 1604 L45mm mit Innenkühlung Manufacturer: Teknik Makina Measurements Head diameter: 50 mm Overall length: 45 mm Weight: 0.489 kg Cutting angle: 90° Cutting edges: 5 Torx screw: M4x10 Torx key: T15 Special features Internal coolant (coolant-through) For APMT 1604 indexable inserts Compatible insert manufacturer: Korloy Manufacturer: Teknik Makina FAQ What insert type does the head accept? The head accepts APMT 1604 indexable inserts; insert grades from Korloy are compatible for diverse material ranges. Does the head provide coolant to the cutting edge? Yes, the tool features internal coolant to the cutting zone for improved chip control and cooling. Which fastening components are used for insert clamping? Insert clamping uses an M4x10 Torx screw with a Torx T15 drive for secure and fast insert changes. Is this head suitable for shoulder and face milling? The 90° cutting geometry and compact 50 mm diameter make the head well suited to square-shoulder and face-milling operations. What is the SKU for ordering or referencing the tool? The SKU is T243-1TM, which identifies the Teknik Makina square shoulder milling head with internal coolant. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact design, internal coolant and secure clamping for reliable corner turning operations; order the tool directly via Metav Werkzeuge or consult the technical team for integration advice. Indexable Corner Turning Head T534-1TM — 50 mm diameter, internal coolant, for BDMT 11T3 The Indexable Corner Turning Head T534-1TM is a compact, coolant-fed tool head engineered for precision external turning using BDMT 11T3 indexable inserts, ideal for general workshop and small-batch production environments. 50 mm tool head diameter Internal coolant supply Fits BDMT 11T3 indexable inserts 90° cutting angle, six cutting edges Faster cycle times through directed coolant and cleaner cuts The integrated internal coolant channel supplies cutting fluid directly to the cutting edge, improving chip evacuation and reducing thermal load during machining. By keeping the cutting zone cool and clear, the tool head supports more consistent cutting conditions and longer insert life, which translates into fewer interruptions for tool change and increased production throughput. The combination of targeted coolant and a robust clamping interface helps maintain process stability even in demanding-turning operations. Wide compatibility with common indexable insert standards Designed for BDMT 11T3 indexable inserts and compatible with inserts from Kyocera, this turning head simplifies tooling logistics by matching widely used insert geometries. The secure fixing relies on a Torx fastener system (Torx key size T8, screw M2.5x5.5), ensuring repeatable seating and easy reindexing of inserts. Compatibility with standard inserts reduces stocking variety while ensuring access to a broad range of grades and coatings for different materials and cutting conditions. Compact form factor for rigid mounting and access to tight contours With a 50 mm diameter and an overall length of 40 mm, the tool head balances rigidity and accessibility, allowing close approach to shoulders and small-diameter features without sacrificing stability. The 90° cutting angle provides predictable tool orientation for facing and external corner turning, while the relatively low mass (approx. 0.361 kg) reduces centrifugal stress at higher spindle speeds. The compact design supports rigid clamping and repeatable set-up in common lathe tool holders. Practical workshop handling and maintenance benefits The turning head's straightforward mechanical design keeps maintenance simple: the Torx fixation enables quick insert changes and the internal coolant port can be connected to existing machine coolant lines. By standardising on a coolant-fed corner head that accepts BDMT inserts, workshops reduce changeover time and simplify process documentation. The tool head is supplied by a recognised manufacturer, making spare parts and matched inserts readily available to maintain uptime. For supply, technical matching or to discuss suitable insert grades, contact Metav Werkzeuge for direct procurement and workshop integration support. Technical data Article number: T534-1TM SKU: T534-1TM ECLASS: 21181015 Core data Diameter: 50 mm Overall length: 40 mm Weight: 0.361 kg Cutting edges: 6 Cutting angle: 90° Features Product type: Indexable corner turning head Compatible inserts: BDMT 11T3 Compatible insert manufacturer: Kyocera Internal coolant: Yes Torx key size: T8 Torx screw: M2.5x5.5 Manufacturer: Teknik Makina FAQ Which inserts fit this turning head? The turning head accepts BDMT 11T3 indexable inserts; compatible inserts from Kyocera are suitable for standard applications. Is the coolant connection internal or external? This tool head features internal coolant, delivering fluid directly to the cutting edge for improved chip control and tool life. What are the key dimensions to check for setup? Important dimensions include a 50 mm head diameter and an overall length of 40 mm, which influence toolpost clearance and holder selection. Which fastener is required for the insert? Insert clamping is via a Torx screw, specified as M2.5x5.5, tightened with a T8 Torx key. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a compact 50 mm diameter, integrated internal coolant and standard BDMT 1704 compatibility for reliable square-shoulder turning and reduced cycle times. Order the corner tool head directly via Metav Werkzeuge or ask the consultants for tailored advice. Corner Tool Head for BDMT 1704 Indexable Inserts — 50 mm, Internal Coolant (Teknik Makina) The Corner Tool Head for BDMT 1704 Indexable Inserts is a compact, coolant-fed turning head designed for precise external square-shoulder machining in industrial and workshop environments. 50 mm diameter for compact turning heads Internal coolant for effective chip evacuation Compatible with BDMT 1704 Kyocera inserts 90° cutting angle for square shoulder turning Secure fastening with M4x10 Torx T15 screw Accurate square-shoulder machining with minimal deflection The compact geometry and sturdy design deliver consistent repeatability when producing square shoulders. The 50 mm diameter and robust clamping reduce overhang and vibration, which helps maintain dimensional accuracy across batches. The 90° cutting angle is optimised for shoulder faces, ensuring sharp corner definition and reducing secondary finishing. For production environments where repeatable outcomes matter, the combination of reduced deflection and stable cutting geometry improves first-pass yield and shortens rework time. Coolant-fed design that prolongs tool life and improves finishes An integrated internal coolant channel supplies cutting fluid directly to the insert contact zone, which lowers cutting temperatures and minimises built-up edge formation. The result is an improved surface finish and extended tool life, particularly during continuous operations or when using higher cutting parameters. Enhanced chip evacuation also reduces the risk of recutting and abrasion, supporting longer intervals between insert changes and more predictable maintenance cycles. Standardised insert compatibility and secure fastening for quick changeovers Designed for standard BDMT 1704 indexable inserts and compatible with Kyocera tooling, the head supports commonly available carbide inserts to simplify logistics and inventory. The insert is secured with an M4x10 screw tightened with a Torx T15 key, providing reliable clamping torque and repeatable seating. This standardised approach shortens tool-change procedures and lowers the potential for incorrect insert selection, enabling faster turnaround during shift changes and scheduled maintenance. Compact reach and balanced mass for efficient workshop use With an overall length of L40 mm and a mass of approximately 0.312 kg, the head offers a measured reach that limits cantilever forces while still granting access to typical external turning geometries. The compact footprint facilitates stable cutting conditions, reduces spindle load and supports higher feed rates where appropriate. For workshops seeking to streamline setups, the compact design contributes to shorter changeover times and better machine utilisation without compromising rigidity. Choose the coolant-fed corner tool head from Teknik Makina for robust, repeatable square-shoulder turning and contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for application-specific guidance and reliable supply Technical data SKU: T538-1TM Product type: Corner tool head Name: Eckmesserkopf Description: for BDMT 1704 Indexable Inserts Measurements & weights Diameter: 50 mm Overall length: 40 mm Weight: 0.312 kg Cutting angle: 90° Number of cutting edges: 5 Features & compatibility Internal coolant: yes Compatible inserts: BDMT 1704 Compatible insert manufacturer: Kyocera Fastening: M4x10 Torx T15 screw ECLASS: 21181015 FAQ Which inserts fit this tool head? The head accepts BDMT 1704 indexable inserts; it is specified for standard-size inserts such as those from Kyocera. Is the coolant supply internal or external? This indexable head provides internal coolant, delivering cutting fluid directly to the insert seat for improved cooling and chip control. What fastening hardware is required for secure clamping? The insert is secured with an M4x10 screw and requires a Torx T15 key for reliable tightening. What is the overall length and weight of the head? Overall length is L40 mm and the tool head weighs approximately 0.312 kg, offering a compact reach with reduced overhang. Which operations is this head best suited to? The head is optimised for square-shoulder and external turning where a 90° cutting angle and coolant-fed operation bring benefits in finish quality and tool life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of 50 mm diameter, internal coolant and Sandvik‑compatible insert mounting for dependable corner machining and improved tool life; order the tool directly via Metav Werkzeuge or consult the team for application advice. Corner cutter head T578-1TM — 50 mm diameter, internal coolant (for R390 11 indexable inserts) The Corner cutter head for R390 11 indexable inserts is designed for precise corner and shoulder machining in turning and milling setups, with a compact overall length for close‑quarter operations 50 mm diameter for stable cutting Internal coolant for better chip evacuation Compatible with Sandvik R390 11 inserts 90° cutting angle for corner machining 40 mm overall length, compact design Maximise process stability with targeted coolant delivery The combination of a 50 mm diameter body and internal coolant creates a reliable interface between tool and workpiece, reducing thermal growth and improving repeatability in serial production. Internal coolant channels actively direct cutting fluid to the insert rake face, which supports controlled chip formation and extends insert life. For workshops seeking measurable uptime gains, the application of targeted coolant contributes directly to more consistent component tolerances and fewer unscheduled tool changes. Robust mounting and indexable insert economy Mounting is achieved for R390 11 indexable inserts, a common Sandvik configuration that simplifies supply and inventory. The tool uses a M2.5x7 Torx screw tightened with a T8 Torx key to secure each insert; this proven clamping reduces micro‑movement and maintains cutting geometry under load. With six cutting edges available on the indexable parts and an incorporated 90° cutting angle, the head supports efficient corner engagement and quick insert indexing, which lowers per‑component tooling cost and shortens downtime during maintenance. Compact dimensions for tight applications and machine compatibility The head’s 40 mm overall length and low mass (0.355 kg) make it suitable where access is limited or where minimal overhang is required for rigidity. That compact footprint helps maintain cutting parameters closer to design values and reduces vibration in medium‑duty turning and milling tasks. Delivered as a ready‑to‑mount unit from Teknik Makina, the assembly is aimed at production environments that demand both repeatable performance and straightforward serviceability. Contact Metav Werkzeuge today to confirm suitability for the intended application and to order the Teknik Makina corner cutter head T578-1TM; email info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance Technical data Article number: T578-1TM SKU: T578-1TM ECLASS: 21181015 Facts Diameter: 50 mm Overall length: 40 mm Weight: 0.355 kg Cutting angle: 90° Cutting edges: 6 Special features Internal coolant Compatible with Sandvik R390 11 indexable inserts Torx key: T8 Torx screw: M2.5x7 Manufacturer: Teknik Makina FAQ Is this head compatible with Sandvik R390 11 inserts? Yes. The T578-1TM is designed for R390 11 indexable inserts and is Sandvik‑compatible, enabling straightforward use of common insert grades. Does the tool provide through‑coolant capability? Yes. The corner cutter head includes internal coolant to direct lubricant and coolants to the cutting zone for improved chip control and tool life. What cutting geometry is offered and what is it suited for? The head has a 90° cutting angle, which is ideal for corner machining, shoulder turning and other operations that demand square engagement. How are inserts secured in the head? Inserts are clamped with a M2.5x7 Torx screw; a T8 Torx key is used for tightening to the recommended torque values for secure seating. What are the physical dimensions and the SKU for ordering? Diameter 50 mm, overall length 40 mm, weight 0.355 kg; order reference SKU T578-1TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, machine-ready solution that pairs secure clamping with straightforward insert compatibility: the T116TM combines TPKN 1603 insert compatibility with a 90° cutting geometry for reliable shoulder cuts and reduced setup time. Order via Metav Werkzeuge or request tailored advice from our consultants for optimal integration into existing toolholders. T116TM corner tool head – for TPKN 1603-2204 indexable inserts, Ø50 mm, 90° T116TM corner tool head designed for robust shoulder turning and square-edge operations with TPKN 1603-2204 indexable inserts T116TM corner tool head by Teknik Cutting Tools Compatible with TPKN 1603-2204 indexable inserts 90° cutting angle for precise shoulder turning Ø50 mm head diameter, M6x17 clamp screw Precision shoulder cuts with reliable insert compatibility The T116TM corner tool head is engineered for consistent square-shoulder machining by using standard indexable inserts (TPKN 1603) that simplify inventory and reduce changeover time. The fixed 90° cutting geometry ensures that shoulder faces remain perpendicular to the workpiece datum, which benefits repeatability and reduces secondary operations. For shops converting from brazed or single‑edge tools, this holder offers a familiar workflow while taking advantage of interchangeable insert economics. Secure clamping and repeatable tool setting for stable cycles A robust M6x17 clamp screw combined with the supplied 4 mm Allen key enables secure fixation of the insert and predictable clamping torque, improving positional stability during heavy cuts. The holder’s 22 mm mounting bore matches common toolpost and turret interfaces, while the modest 0.34 kg mass contributes to low inertial effects during rapid indexing. These mechanical decisions translate into fewer vibrational deviations and a measurable increase in first‑pass accuracy for high‑mix production. Compact design that improves accessibility and cycle efficiency With a Ø50 mm head diameter and a total length of 44 mm, this corner head is accessible in confined tool pockets and close‑proximity operations where larger holders would interfere. The compact footprint helps to reduce overhang and thus allows higher feed rates without compromising surface finish. The holder’s three cutting edges design offers balance between edge life and insert cost, enabling predictable replacement scheduling and simplified tool crib management. Easy integration across turning applications and straightforward maintenance Designed for standard machining centres and lathes, the insert holder integrates with existing systems via its 22 mm bore and conventional clamping arrangement. The combination of standard insert format and familiar mounting hardware means minimal retraining for operators and reduced fixture modifications. If specific machining data or compatibility checks are required for atypical setups, Metav’s technical team can advise on optimal insert grades and cutting parameters to match the material and cycle demands. For a reliable corner turning solution from Teknik Cutting Tools, contact Metav Werkzeuge for availability and application guidance — Metav Werkzeuge is ready to advise on integration and supply: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: T116TM Brand: Teknik Makina EClass: 21181015 Description: corner tool head for indexable inserts Core dimensions Head diameter: 50 mm Mounting bore / shank: 22 mm Overall length: 44 mm Weight: 0.34 kg Cutting angle: 90° Cutting edges: 3 Features & compatibility Compatible with TPKN 1603-2204 indexable inserts Clamp screw: M6x17 Allen key: 4 mm Suitable for square-shoulder turning SKU: T116TM FAQ Which insert types fit this tool head? The holder accepts TPKN 1603 format indexable inserts and is described for TPKN 1603-2204 sizes compatible with the 90° geometry. What is the required mounting interface on the turret or toolpost? The holder requires a 22 mm mounting bore; matching toolposts or adapters with a 22 mm interface ensure correct seating and stability. How is the insert secured and replaced? Insert fixation is achieved with an M6x17 clamp screw tightened using the supplied 4 mm Allen key, providing consistent clamping force and straightforward insert changes. Is the head suitable for tight or obstructed tool positions? Yes — the compact Ø50 mm head and 44 mm overall length improve accessibility in constrained pockets while maintaining rigidity for shoulder turning. Can this holder be used for heavy‑duty turning? The secure clamp design and short overhang enhance stability; for heavy roughing, select a suitable insert grade and verify machine rigidity and cutting parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine robust internal coolant, a compact 50 mm diameter and dependable compatibility with TPKT 1003 indexable inserts for controlled chip evacuation and consistent turning results. Order the corner tool head directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. Corner Tool Head for TPKT 1003 Indexable Inserts — 50 mm, internal coolant (Teknik Makina) Corner Tool Head engineered for precision corner turning with TPKT 1003 indexable inserts in CNC turning applications. 50 mm diameter for compact mounting Internal coolant for improved chip control Compatible with TPKT 1003 indexable inserts 100° cutting angle with six cutting edges Enhanced cooling for consistent results The integrated internal coolant channel directs cutting fluid close to the cutting edge to reduce heat and assist chip evacuation. This targeted cooling helps to preserve insert life and stabilise cutting temperatures, which contributes to a more consistent surface finish and fewer unplanned tool changes. For operations where thermal stability is crucial, the internal coolant is a clear process advantage that supports longer production runs and predictable tool behaviour. Compact form for constrained tool stations With a 50 mm diameter and an overall length of 40 mm, the tool head offers a compact footprint for tight set-ups while maintaining sufficient mass for damping vibrations. The modest mass of 0.345 kg supports controlled dynamic behaviour in small to medium‑sized turning centres. This compact design enables closer approach to workpieces in confined fixturing scenarios without sacrificing the rigidity required for accurate corner turning. Versatile compatibility and secure clamping Designed specifically for TPKT 1003 indexable inserts and compatible with inserts from ISCAR, the head accepts the common triangular insert geometry used for external profiling. The robust 100° cutting angle and provision of six cutting edges deliver flexible indexing options and extended in‑service life per insert. Assembly and indexation use a Torx T15 drive for secure clamping and repeatable tightening torques, aiding quick insert changes and minimal spindle downtime. Practical fit for production and toolroom workflows Manufactured by Teknik Makina and offered under SKU T175TM, the head is suitable for both small batch production and jobbing work where repeatability matters. The geometry and coolant provision support stable cutting in many turning tasks, reducing scrap rates and enhancing process reliability. For purchasers seeking to simplify procurement, Metav’s centralised supply from Emmerich acts as a quality filter and logistics partner for European workshops. For machining applications that require precise corner turning with effective cooling, request the technical data sheet or arrange ordering via Metav Werkzeuge — the team in Emmerich can advise on machine compatibility and delivery options. Technical data Article number: T175TM ECLASS: 21181015 Manufacturer: Teknik Makina Facts Diameter: 50 mm Overall length: 40 mm Weight: 0.345 kg Cutting angle: 100° Number of cutting edges: 6 Shank connection diameter: 22 mm Torx key: T15 Special features Internal coolant (through‑tool) For TPKT 1003 indexable inserts Compatible with ISCAR inserts Product type: Corner tool head SKU label: 50mm Eckmesserkopf TPKT 1003 L40mm mit Innenkühlung FAQ Is this head compatible with ISCAR TPKT 1003 inserts? Yes. The corner tool head accepts TPKT 1003 geometry and is specified as compatible with ISCAR insert variants. What is the required tightening tool for insert clamping? Clamping and indexation use a Torx T15 drive for secure and repeatable fastening. Does the tool head provide internal coolant? Yes. The head features internal coolant to direct fluid to the cutting zone for improved chip control and thermal management. Which machines benefit most from this compact head? Small to medium turning centres and tight fixturing situations benefit from the 50 mm diameter and 40 mm overall length for improved access and stability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact tooling solution that combines rigidity and effective cooling for consistent results in turning operations; the 50 mm diameter head with a 90° cutting angle and internal coolant reduces tool chatter and extends insert life — order directly via Metav Werkzeuge or consult our specialists for fine‑tuning. Eckmesserkopf corner tool head by Teknik Makina — 50 mm, internal coolant Eckmesserkopf is a compact corner tool head designed for precise turning and shoulder operations with WNEX 0806 indexable inserts 50 mm diameter cutting head Internal coolant for improved chip evacuation Compatible with WNEX 0806 indexable inserts Torx T15 screw M4x10 retention Stable cutting geometry for reliable surface finish The robust 50 mm diameter body delivers rigidity where it matters, reducing vibration during shoulder and facing cuts. A defined 90° cutting angle creates consistent contact geometry, which in turn improves repeatability and surface quality on both short and medium‑length overhangs. For workshops aiming to tighten tolerances, the compact head form provides a predictable cutting behaviour and helps maintain machine uptime through fewer reworks. Controlled cooling for longer insert life and cleaner chips Built‑in internal coolant channels direct coolant to the cutting zone, improving heat dissipation and chip control during continuous or interrupted cuts. This cooling strategy lowers thermal load on the insert edges and supports longer tool life, especially when machining challenging materials. Retention is secured via a Torx T15 screw (M4x10), ensuring consistent clamping torque and simple serviceability during index changes. Proven compatibility and flexible tooling options Designed for WNEX 0806 indexable inserts and compatible with YG‑1 inserts, the head simplifies tooling selection and replacement cycles. The 40 mm overall length keeps the cutting point close to the holder body for increased stiffness, while the unit’s modest mass (0.285 kg) makes it suitable for a broad range of lathes and turret configurations. Support for five cutting edges provides efficient use of insert geometry before replacement is required. Practical workshop benefits and application focus This corner tool head suits production and maintenance environments where repeatable shoulder cuts and accurate facing are required. The combination of a compact form, targeted coolant delivery and secure fastenings reduces cycle‑to‑cycle variation and supports higher first‑pass yields. For operations that value predictable tool behaviour and straightforward insert management, the component integrates smoothly into established tooling systems and procedure sheets. Discuss specification details with Metav Werkzeuge to match this Teknik Makina corner tool head to the application requirements — contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored advice and ordering support. Technical Data Article number: T771-1TM Label: 50mm corner tool head WNEX 0806 L40mm with internal coolant Product type: Corner tool head Brand: Teknik Makina Facts Diameter: 50 mm Overall length: 40 mm Weight: 0.285 kg Number of cutting edges: 5 Cutting angle: 90° Special features Internal coolant Compatible with WNEX 0806 indexable inserts Compatible insert manufacturer: YG-1 Torx screw: M4x10 (Torx T15) FAQ What insert standard does this head accept? The corner tool head accepts WNEX 0806 indexable inserts; it is also compatible with inserts from YG‑1, allowing straightforward procurement of replacement edges. How does the internal coolant improve performance? Internal coolant delivers fluid directly to the cutting zone, which helps to reduce heat at the edge, improve chip evacuation and extend insert life under continuous cutting. Which screw and key are required for insert clamping? Insert retention uses a Torx T15 screw (M4x10); a T15 Torx key is recommended for correct clamping torque and repeatable seating. Is the head suitable for long overhangs? The compact 40 mm overall length and 50 mm body diameter favour stiffness and stability; for extended overhangs, review machine and workpiece conditions to ensure acceptable deflection limits. Can this tool head be used for finishing and semi‑finishing operations? Yes — the defined 90° cutting angle and rigid design make the head suitable for both semi‑finishing and finishing when matched with the appropriate insert grade. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precision turning with a 50 mm diameter head and integrated internal coolant for improved chip control and longer tool life; combine rigidity and quick insert changes to keep production steady. Order the corner turning head directly via Metav Werkzeuge or ask our consultants if needed. Corner turning head T775-1TM — 50 mm diameter, internal coolant (Teknik Makina) The Corner turning head T775-1TM is a compact tool head designed for precise external corner turning with WNGX 0806 indexable inserts, suited to production and workshop environments where stability and coolant support are required. 50 mm diameter for stable cutting Integrated internal coolant channel Compatible with WNGX 0806 Korloy inserts Secured with M5x12 Torx T20 screw Precision and stability for consistent part quality The robust geometry of the turning head offers a 50 mm diameter body and a 90° cutting angle, which together reduce deflection and vibration during finishing passes. With an overall length of 40 mm, the compact design keeps the centre of gravity close to the holder and improves tool stiffness, supporting repeatable dimensional results and superior surface finish. The reduced oscillation benefits cycle-time stability in serial production and small-batch runs alike. Coolant-fed design that prolongs tool life A built-in internal coolant channel directs lubricant precisely to the cutting zone, improving chip evacuation and reducing thermal load at the cutting edge. This targeted coolant flow helps preserve the cutting geometry of the insert and extends service intervals, translating into lower tooling costs per part. The coolant-fed configuration is particularly effective when machining demanding alloys or when elevated cutting speeds are required. Fast insert changes and secure clamping for uptime Designed for WNGX 0806 indexable inserts from Korloy, the head enables swift insert replacement while maintaining repeatable clamping accuracy. The insert is fixed by an M5x12 Torx screw (Torx key T20), ensuring a secure fit and straightforward maintenance routines. This combination of compatibility and reliable fastening reduces downtime during tool changes and simplifies workshop logistics. Ready for workshop and production integration The tool head accepts a 22 mm toolholder interface and weighs approximately 0.277 kg, which facilitates handling and mounting while keeping the assembly well balanced. Manufactured by Teknik Makina, the component is engineered for practical durability and consistent fit into standard turning stations. The compact profile and coolant capability make it a practical choice for both precision jobbing and series manufacturing. For reliable high-precision corner turning, request technical advice or place an order for the Teknik Makina T775-1TM via Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: T775-1TM eClass: 21181015 Product: Corner turning head for WNGX 0806 indexable inserts Facts Diameter: 50 mm Overall length: 40 mm Toolholder interface diameter: 22 mm Weight: 0.277 kg Cutting angle: 90° Torx screw: M5x12 Torx key: T20 Special features Internal coolant Compatible with Korloy WNGX 0806 inserts Manufacturer: Teknik Makina FAQ What inserts fit this turning head? The turning head accepts WNGX 0806 indexable inserts; it is compatible with Korloy WNGX 0806 inserts and designed for straightforward indexing and replacement. Does the head support internal coolant? Yes, the T775-1TM features an internal coolant channel that directs fluid to the cutting zone for improved chip control and extended tool life. Which screw secures the insert? Insert clamping is achieved with an M5x12 Torx screw, tightened with a T20 Torx key to ensure a reliable and repeatable connection. What is the toolholder interface size? The head is designed for a 22 mm toolholder interface, facilitating compatibility with common turning tool posts. Is the head suitable for heavy roughing cuts? The compact 50 mm diameter and 90° geometry provide good rigidity for many turning applications, though final suitability depends on material and cutting parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid tool head that delivers repeatable square shoulders and reliable chip control thanks to 50 mm diameter, internal coolant and a short 40 mm overall length — ideal for confined lathe setups; order via Metav Werkzeuge or contact their consultants for tailored advice. Corner tool head for XNKT 0604 indexable inserts — 50 mm, internal coolant (Teknik Makina) The corner tool head for XNKT 0604 indexable inserts is a short-reach turning head designed for precision external turning and shoulder machining in compact setups, offering internal coolant and secure Torx clamping for stable, repeatable results. 50 mm head diameter for compact setups Internal coolant for stable chip evacuation Compatible with XNKT 0604 Korloy inserts Short overall length L40 mm for tight spaces Consistent square shoulders through compact rigidity A reduced head diameter paired with a robust geometry ensures a stable cutting platform: the 50 mm dimension and 90° cutting angle deliver true square shoulders and minimise deflection during finishing passes. This rigidity translates into lower scrap rates and higher first-pass accuracy, which is particularly valuable when machining small batches or precision components where dimensional repeatability matters. The combination of compactness and stiffness supports higher feed rates without sacrificing surface integrity. Directed coolant flow and reliable clamping extend insert life Built-in internal coolant supplies cutting fluid close to the cutting edge, improving chip evacuation and reducing thermal load on the insert. The design uses an M3x7 Torx screw and a T8 Torx key for repeatable, secure clamping, so indexable inserts remain seated under variable cutting forces. Less insert wear and better chip control lower tooling costs and reduce unplanned downtime, providing measurable efficiency gains on the shop floor. Fast changeovers and broad compatibility for production flexibility Engineered for XNKT 0604 indexable inserts, the head is compatible with Korloy inserts for straightforward sourcing and rapid changeovers. The L40 mm overall length and 22 mm shank interface make the head suitable for tight toolpost geometries, enabling machines with limited overhang to achieve productive cutting conditions. The compact footprint supports flexible tool layouts and easier access to workpieces in fixtures and chucks. Practical benefits for workshops and production lines This turning head is aimed at workshops and industrial users who value straightforward, reliable tooling: fewer setups, predictable clamping and improved coolant delivery all contribute to smoother production flow. Procurement through Metav brings the advantage of centralised supply and technical guidance from a partner experienced in precision tooling, helping to ensure that the tooling choice aligns with machining strategy and throughput requirements. For secure, compact turning with Teknik Makina quality, contact Metav Werkzeuge GmbH in Emmerich for ordering or technical matching — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific machines and applications. Technical Data SKU: T854-1TM Product: Corner tool head (Eckmesserkopf) Insert type: XNKT 0604 Compatible insert manufacturer: Korloy Brand: Teknik Makina Core specifications Diameter: 50 mm Overall length: 40 mm Shank diameter: 22 mm Weight: 0.348 kg Cutting angle: 90° Cutting edges: 7 Special features Internal coolant Torx screw M3x7 Torx key: T8 ECLASS: 21181015 Label: 50mm Eckmesserkopf XNKT 0604 L40mm mit Innenkühlung FAQ What inserts fit this tool head? The corner tool head accepts XNKT 0604 indexable inserts and is specified for Korloy XNKT 0604 grades; the head (SKU T854-1TM) uses the M3x7 Torx screw for secure clamping of those inserts. Does the head provide coolant to the cutting edge? Yes — internal coolant is integrated to direct lubricant to the cutting zone, improving chip control and helping to extend insert life when using the corner tool head. What are the mechanical dimensions relevant for installation? Key installation dimensions are a 50 mm head diameter, 22 mm shank diameter and an overall length of 40 mm (L40), which should be checked against the machine toolholder and toolpost envelope. How does the 90° cutting angle affect machining? The 90° cutting angle produces true square shoulders and simplifies finishing operations, reducing the need for secondary facing passes and supporting consistent surface quality. Which tools are required for insert changes? Insert clamping is by an M3x7 Torx screw tightened with a T8 Torx key, ensuring repeatable clamping torque and quick, secure insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Efficient machining is achieved by combining a compact 50 mm tool head with internal coolant and a 90° cutting geometry, delivering stable corner cuts and extended insert life; order the component directly via Metav Werkzeuge or consult our specialists for application advice. Corner tool head T512-1TM — 50 mm diameter, internal coolant, for XOMX 1204 indexable inserts (Teknik Makina) The corner tool head for XOMX 1204 indexable inserts is a compact, coolant-fed turning solution designed for precise 90° corner machining in CNC turning and light milling applications 50 mm diameter for compact setups Internal coolant for enhanced tool life 90° cutting angle for corner machining Compatible with XOMX 1204 SECO inserts Precision and stability for tight tolerances The 50 mm body combined with a 90° cutting angle provides a stable interface for corner-facing and profiling operations. With internal coolant directed to the cutting zone, heat is managed at the source which reduces thermal deformation and supports consistent tolerances over long cycles. Designed for indexable inserts of the XOMX 1204 format, this tool head enables rapid insert replacement while keeping runout and vibration to a minimum, which is particularly valuable in high-precision batch production. Faster changeovers and predictable maintenance A straightforward clamping concept and common fixing hardware reduce setup time. The head is secured with a T10 Torx drive and a M3.5x8.5 fastening screw, allowing quick insert changes with minimal downtime. The provision for five cutting positions supports flexible cutting strategies and economical use of inserts. Compatibility with SECO indexable inserts simplifies procurement and inventory management for workshops already standardising on that supplier. Compact build that keeps production reliable With an overall length of L40 mm and a mass of 0.351 kg, the unit suits confined tool posts and multi-station turrets without introducing excessive overhang. The compact dimensions and internal coolant routing extend insert life and reduce peak cutting forces, promoting a steady production flow and fewer unplanned tool changes. Manufactured by Teknik Makina, the head is aimed at shops seeking a balance of rigidity, serviceability and integration into existing CNC systems. Contact Metav Werkzeuge for ordering the Teknik Makina corner tool head T512-1TM or for tailored cutting recommendations; technical enquiries can be directed to info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: T512-1TM Product type: Corner tool head Brand: Teknik Makina Compatible inserts: XOMX 1204 ECLASS: 21181015 Key measurements Diameter: 50 mm Overall length: 40 mm Weight: 0.351 kg Cutting angle: 90° Number of cutting edges: 5 Features Internal coolant: yes Torx key: T10 Torx screw: M3.5x8.5 Compatible insert manufacturer: SECO SKU / UID: T512-1TM FAQ What inserts fit this tool head? The corner tool head accepts XOMX 1204 indexable inserts; compatibility with SECO inserts is specified to support common shop standards. Is the coolant routed through the tool head? Yes, the unit features internal coolant to deliver cutting fluid directly to the tool–workpiece interface, improving tool life and surface quality. What is the fixing method for the insert? The insert is clamped with a Torx-mounted screw (drive T10, screw M3.5x8.5), enabling fast and repeatable insert changes on the T512-1TM head. Can this head be used in compact turrets? The compact dimensions (50 mm diameter, L40 mm) and low weight (0.351 kg) make the head suitable for confined tool posts and multi-station turrets where reduced overhang is required. Who manufactures this tool head? The component is produced by Teknik Makina and supplied as the corner tool head T512-1TM for industrial cutting applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact combination of 50 mm diameter, internal coolant and compatibility with LNMX 1006 indexable inserts for stable corner turning and extended insert life; order the component directly via Metav Werkzeuge or consult the technical team for integration advice. Corner tool head T387-1TM — 50 mm diameter, internal coolant (Teknik Makina) A corner tool head designed for precision external turning with LNMX 1006 indexable inserts, optimised for rigid setups and reliable coolant delivery. 50 mm diameter for stable machining Internal coolant for improved chip evacuation Compatible with LNMX 1006 Korloy inserts 45 mm overall length with 90° cutting angle Consistent rigidity and repeatable cutting performance The robust 50 mm diameter and 45 mm overall length deliver high rigidity in short overhang applications, reducing chatter and improving surface finish. The head is engineered to accept LNMX 1006 indexable inserts, ensuring repeatable tool geometry and consistent cutting behaviour. Where spindle or turret space is limited, the compact design maintains process stability; the specified 90° cutting angle is particularly effective for facing and shoulder operations, enabling precise, square corners with predictable tool engagement. Targeted cooling that extends insert life Internal coolant supply is routed directly to the cutting zone, so cooling and lubrication are delivered where they matter most. This reduces edge temperature, improves chip evacuation and can prolong the service life of indexable inserts. The head is supplied with a Torx T8 fastening system and an M3x7 Torx screw for secure clamping, which supports precise seat contact and simple maintenance procedures. Improved thermal control along with correct clamping reduces the likelihood of premature wear and contributes to consistent cycle times. Workshop integration and handling advantages Designed for straightforward integration into existing toolholders, the head is light at 0.472 kg, facilitating rapid tool changes and minimising turret load. Compatibility with Korloy-produced LNMX 1006 inserts simplifies procurement and stockkeeping for operations that standardise on that insert family. The construction allows for predictable balancing and handling during set-up, while the compact form factor supports versatile use across turning centres where space and accessibility are key considerations. Contact Metav Werkzeuge today for tailored procurement and rapid delivery from Emmerich — request the T387-1TM corner tool head and receive expert guidance on implementation and tooling choices. Technical data Article number: T387-1TM ECLASS: 21181015 Label: 50mm Eckmesserkopf LNMX 1006 L45mm mit Innenkühlung Facts Diameter: 50 mm Overall length: 45 mm Weight: 0.472 kg Number of cutting edges: 6 Cutting angle: 90° Torx key: T8 Torx screw: M3x7 Special features Internal coolant Compatible with LNMX 1006 indexable inserts Suitable for Korloy inserts Product type: Corner tool head Manufacturer: Teknik Makina FAQ Which inserts fit the head? The head accepts LNMX 1006 indexable inserts and is listed as compatible with inserts from Korloy; the interface matches the LNMX 1006 geometry specified for the tool head. Is the coolant internal or external? This model features internal coolant, routed to the cutting zone to support chip evacuation and thermal control at the insert edge. What is the recommended application for the head? The tool head is intended for precision corner turning and facing operations where a 90° cutting angle and compact overhang contribute to improved surface quality and repeatability. How is the insert clamped? Clamping is secured with an M3x7 Torx screw, operated with a T8 Torx key, ensuring firm seating of the insert and straightforward maintenance. Can the head be used on compact turrets? Yes; with a 50 mm diameter, 45 mm overall length and a mass of 0.472 kg, the head is suited to compact turret systems where rigidity and low overhang are required. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of a compact 90° cutting angle, secure Torx clamping and precise fitment for WNMU 0806 indexable inserts to streamline turning operations; order genuine components via Metav Werkzeuge or consult our experts for seamless integration and supply. Corner Tool Head T543TM — 90° Turning Head for WNMU 0806 Indexable Inserts (Teknik Makina) The Corner Tool Head T543TM is a 90° turning head designed for turning and facing applications that accept WNMU 0806 indexable inserts, offering a compact interface for toolholders with a 22 mm shank. 90° cutting angle for compact set-ups Compatible with Kyocera WNMU 0806 inserts 22 mm shank diameter for standard holders Secured by M5x12 Torx screw with T20 key Accurate right‑angle cutting that keeps setups compact and predictable The 90° geometry of this turning head delivers a dependable orientation for corner and face turning tasks. By using a dedicated interface for WNMU 0806 inserts, the head ensures repeatable seating and chip control appropriate to the insert geometry; this reduces trial adjustments during tool changes and supports a consistent machining routine. The compatibility with Kyocera insert standards simplifies procurement and reduces the need for adapters, which in turn shortens machine downtime between jobs. Secure clamping and straightforward insert replacement for efficient workshops Clamping is achieved via an M5x12 Torx screw tightened with a T20 key, providing a robust connection between insert and head. The clear mechanical fastening means indexable inserts can be replaced rapidly while maintaining axial and radial positional stability. The head’s 22 mm mounting diameter is compatible with common toolholder systems, enabling fast tool swaps and predictable engagement with existing turning fixtures. Designed to cut changeover time and protect production throughput With three cutting edges and a dedicated insert pocket, the tool head supports quick rotation or replacement of the insert to present a fresh cutting edge without replacing the entire tool assembly. This feature contributes to lower per‑piece tooling costs and fewer interruptions on the shop floor. The standardised interface reduces setup variability, so cycle times remain stable across repeat batches and shift changes. Built to withstand workshop handling while keeping mass low A compact form with a 50 mm head diameter and an overall length of 46 mm balances stiffness with accessibility in confined toolstations. At 0.36 kg, the component is light enough to be handled easily during tool changes yet substantial enough to contribute to cutting stability in routine turning tasks. The robust metalwork and precise machining of locating surfaces preserve repeatability even after multiple insert changes. Clear fitment and application guidance for procurement and planning This turning head is intended for operations specifying WNMU 0806 indexable inserts from Kyocera or equivalent plate designs. It is suitable for general turning and facing where the insert geometry and toolholder compatibility match; specific material suitability depends on the selected insert grade and machining parameters. The standardised shank diameter simplifies inventory planning for workshops using modular tool systems. Simple maintenance and practical handling recommendations Routine maintenance is limited to cleaning seating surfaces and checking the M5x12 Torx screw for correct clamping after initial run‑in. Use the specified T20 key for consistent torque application and inspect the insert pocket for chips or damage before fitting a fresh cutting plate. Correct handling and timely replacement of worn inserts maintain cutting performance and extend the service life of the tool head. For technical advice, genuine Teknik Cutting Tools components or supply of the Corner Tool Head T543TM, contact Metav Werkzeuge GmbH — info@metav-werkzeuge.com or +49 2822 7131930; our specialists will assist with application matching and delivery. Technical data Article number: T543TM Manufacturer: Teknik Makina SKU: T543TM Facts Shank diameter: 22 mm Head diameter: 50 mm Overall length: 46 mm Weight: 0.36 kg Cutting angle: 90° Special features For WNMU 0806 indexable inserts (Kyocera) Number of cutting edges: 3 Torx screw: M5x12 Torx key: T20 Precision metal construction FAQ Which indexable inserts fit this turning head? The Corner Tool Head T543TM accepts WNMU 0806 indexable inserts; Kyocera‑compatible plates are specified for exact seating. What shank diameter is required for mounting? Mounting requires a 22 mm shank interface; ensure the tooling system accepts a 22 mm holder for correct fit. How is the insert secured in the head? An M5x12 Torx screw secures the insert; use the specified T20 key for tightening to maintain stable clamping. Can the head be used on all lathes and toolholders? The head is suitable for holders that accept a 22 mm shank and the standard indexable insert geometry; verify holder compatibility before installation. What maintenance is recommended to preserve accuracy? Keep seating surfaces clean, inspect for chips before insert replacement and tighten the Torx screw with the T20 key as required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precision-minded milling solution that combines secure mounting, compatibility with SNHU 1206 indexable inserts and straightforward maintenance for uninterrupted production. Choose a tool that balances robust build and easy replacement of cutting edges — order directly via Metav Werkzeuge or consult our specialists for application guidance. Corner milling head T616TM – indexable insert holder for SNHU 1206, 50 mm (Teknik Makina) A precision corner milling head engineered for SNHU 1206 indexable inserts, suitable for facing and profiling operations in workshop and light production environments. 50 mm diameter head Four cutting edges for steady cuts 22 mm holder diameter for secure fit Torx screw M4x10, T15 drive Secure mounting for repeatable set-ups The corner milling head delivers a reliable fitting interface that reduces setup variation. Its 22 mm holder diameter provides a robust connection to the toolholder, while the specified Torx M4x10 fastening with T15 drive ensures a repeatable clamp every time. These measurable attributes contribute to reproducible positioning and reduced run-out, which in turn lowers scrap rates and shortens set-up intervals. For workshops focused on predictable throughput, the combination of a defined shank size and a standardised screw drive supports quick tool changes and stable machining cycles. Consistent cutting with predictable material removal With a 50 mm head diameter and four cutting edges, this insert holder is optimised for balanced material removal across each revolution. Compatibility with SNHU 1206 indexable inserts means users can select grades and geometries appropriate to the workpiece and feed strategy, enabling either higher metal removal rates or improved surface finish as required. The design translates technical values into operational benefits: fewer insert changes for longer runs, and steadier cutting forces for improved tool life of both insert and holder. Where process consistency matters, choosing the right insert grade for the application will unlock the holder’s performance potential. Practical workshop design for serviceability and workflow Maintenance and handling were considered in the choice of fastening and geometry. The Torx drive simplifies tightening torque control during insert changes, and the compact overall length aids access in crowded setups. At approximately 0.298 kg, the head is easy to handle when preparing tool assemblies or changing over machines. These practical details reduce downtime and make the holder well suited to both manual toolrooms and busy CNC cells. For workshops aiming to reduce supplier complexity, sourcing this item through a supplier with an extensive product range and established logistics can simplify procurement and ensure continuity of supply. For application-specific advice or to purchase this Teknik Makina corner milling head (SKU T616TM) directly from Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for rapid assistance Technical data SKU: T616TM Manufacturer: Teknik Makina Diameter: 50 mm Holder/shank diameter: 22 mm Total length: 40 mm Weight: 0.298 kg Number of cutting edges: 4 Compatible with SNHU 1206 indexable inserts Fastening screw: M4x10 (Torx) Torx drive size: T15 FAQ Is this milling head compatible with SNHU 1206 inserts? Yes. The corner milling head is designed for use with SNHU 1206 indexable inserts and accepts their chipbreaker and geometry options. What shank diameter is required for mounting? The tool requires a 22 mm holder/shank diameter for secure mounting. How many cutting edges are available per revolution? The head offers four cutting edges, providing balanced material removal. Which fastening is used for the insert pocket? Fastening is by an M4x10 Torx screw with a T15 drive for secure and repeatable clamping. Is the head suited for quick insert changes in a workshop environment? Yes. The Torx fastening and compact geometry facilitate fast and controlled insert replacement during changeovers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, precision-driven solution that combines a 90° cutting geometry, compatibility with XNEX 0806 indexable inserts and a robust 22 mm shank for stable mounting; order the corner turning head directly via Metav Werkzeuge or consult our specialists for tailored advice. Corner turning head — for XNEX 0806 indexable inserts, 90° cutting angle (Teknik Makina) A durable corner turning head designed for accurate lathe operations using XNEX 0806 indexable inserts, optimised for repeatable corner cuts and secure toolholding 90° cutting geometry for accurate corner turning Compatible with XNEX 0806 indexable inserts 22 mm shank for secure toolholder mounting Torx M4x12.5 fastening with T15 drive Precise corner machining that preserves component tolerances The head delivers a consistent 90° cutting angle, which ensures repeatable corner forms and predictable tool engagement. When used with XNEX 0806 inserts the assembly provides a defined cutting edge position, reducing set-up iterations and minimising finish variation. This characteristic is especially useful where tight right-angle features are required; the controlled geometry helps maintain surface quality and dimensional accuracy while simplifying process planning. Secure mounting and vibration-resistant performance A 22 mm shank offers a compact but stable connection to standard holders, supporting steady cutting forces without excessive overhang. The tool head’s Ø50 mm head diameter and 45 mm overall length balance accessibility with stiffness, while the modest mass of 0.394 kg keeps centrifugal loads low during higher-speed operations. Fastening is achieved via Torx M4x12.5 hardware with a T15 drive, supplying reliable clamping torque and straightforward maintenance when insert changes are required. Broad compatibility for flexible workshop use This corner tool head is specified for XNEX 0806 indexable inserts and is compatible with insert manufacturers such as SECO and WINSTAR, enabling choice of geometries and grades to match workpiece materials. The head features five cutting edges, which supports economical tool use through multiple repositions or indexing. For shops seeking to standardise on compact turning solutions, the component integrates cleanly into existing toolholder systems and supports a variety of finishing or profiling operations with minimal retooling. For application advice or to secure supply from Teknik Cutting Tools via Metav Werkzeuge — including delivery and technical guidance from our Emmerich site — contact Metav Werkzeuge for personalised support and procurement. Technical data Article number: T841TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina For inserts: XNEX 0806 Facts Cutting angle: 90° Shank diameter: 22 mm Head diameter: 50 mm Overall length: 45 mm Weight: 0.394 kg Number of cutting edges: 5 Special features Compatible with SECO, WINSTAR inserts Torx screw: M4x12.5 Torx drive: T15 Designed for indexable insert turning FAQ Which inserts fit this tool head? The corner turning head is specified for XNEX 0806 indexable inserts and fits inserts from manufacturers such as SECO and WINSTAR, offering flexibility in grade and geometry selection. What shank size is required for mounting? Mounting requires a 22 mm shank holder; the 22 mm diameter delivers a secure connection and stable cutting performance. How is the insert secured to the head? Insert clamping is achieved using a Torx M4x12.5 fastener driven with a T15 tool, providing consistent torque for reliable seating. What cutting geometry does the head provide? The head provides a precise 90° cutting angle, optimised for accurate corner turning and repeatable right-angle features. Is the head suitable for high-speed applications? The compact dimensions (Ø50 mm head, 45 mm overall length) and low mass (0.394 kg) support stable operation; matching insert grade and machine parameters is recommended for high-speed use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, 90° corner tool head that offers stable clamping for accurate corner turning and fast insert changes; its compatibility with SPMG 0904 indexable inserts and compact Ø50 mm head ensure high productivity in small turning operations—order directly via Metav Werkzeuge or contact our consultants for application advice. Eckmesserkopf — 90° corner tool head for SPMG 0904 indexable inserts, Teknik Makina The Eckmesserkopf is a compact 90° corner tool head designed for turning operations with SPMG 0904 indexable inserts, suitable for precise corner and shoulder machining in industrial workshops Corner tool head with 90° cutting angle Compatible with SPMG 0904 indexable inserts 50 mm head diameter, lightweight 0.239 kg 22 mm shank diameter, Torx screw M3.5x8.5 Accurate corner turning with consistent tool geometry The 90° configuration provides a defined cutting direction that simplifies set-up and reduces machining steps. By using a standard SPMG 0904 insert format from Taegutec, the holder delivers repeatable edge position and a reliable cutting face, which leads to predictable surface finish and dimensional control. The compact Ø50 mm head minimises overhang while the modest mass (0.239 kg) helps to reduce vibration in shorter-reach turning applications, improving both cycle time and component consistency. Fast changeover and robust fastening for workshop efficiency A secure clamping system with a Torx fastening (M3.5×8.5, T15) ensures stable insert retention and quick replacement when cutting edges are indexed. This reduces downtime during batch changes and supports higher machine uptime. The holder’s 22 mm shank diameter provides a standard machine interface for many tool turrets and boring bars, enabling direct mounting without adapter work—streamlining tool preparation and inventory management in production environments. Designed for dependable performance in routine turning tasks Built for repetitive turning and shoulder profiling, the tool head supports five cutting edges and a precise 90° angle to handle a variety of cornering tasks. The compact overall length (45 mm) offers a balance between access and rigidity, making the unit a pragmatic choice for workshops seeking reliable, easy-to-source tooling. Compatibility with established insert standards lowers procurement friction and helps maintain consistent process quality across shifts and operators. For tailored advice on integrating the Teknik Makina corner head into existing tool setups or for fast supply from Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements and delivery options. Technical data Article number: T338TM Manufacturer: Teknik Makina Product name: Eckmesserkopf Application: for SPMG 0904 Indexable Inserts Diameter: 50 mm Shank diameter: 22 mm Overall length: 45 mm Cutting angle: 90° Number of cutting edges: 5 Weight: 0.239 kg Torx screw: M3.5x8.5 Torx key size: T15 Compatible inserts manufacturer: Taegutec Compatible insert type: SPMG 0904 FAQ Which inserts fit this corner tool head? The corner tool head accepts SPMG 0904 indexable inserts; inserts from Taegutec are specified for this holder and ensure correct seating and cutting geometry. What is the shank diameter for mounting? The holder features a 22 mm shank diameter suitable for standard turret or bar holders that accept a 22 mm interface. How heavy is the tool head and does it affect vibration? The unit weighs 0.239 kg; its compact mass and Ø50 mm head reduce overhang and help to limit vibration in short-reach turning tasks. Which fastening method secures the insert? Insert retention is achieved via a Torx screw (M3.5×8.5) tightened with a T15 key for secure clamping and quick insert changes. Is the cutting angle suitable for shoulder machining? Yes, the fixed 90° cutting angle is optimised for accurate corner and shoulder machining where a defined right-angle cut is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust compatibility with ADKT 1505 indexable inserts, an optimised 90° cutting geometry and integrated coolant for consistent cycle times and longer tool life; order the component via Metav Werkzeuge or consult our specialists for tailored application advice. Corner tool head — 50 mm diameter, internal coolant, for ADKT 1505 indexable inserts (Teknik Makina) The Corner tool head is a compact cutting head designed for shoulder and face-turning applications using ADKT 1505 indexable inserts, offering internal coolant routing and a 45 mm overall length for secure, rigid mounting 50 mm cutting head diameter Internal coolant supply Fits ADKT 1505 indexable inserts 90° cutting angle for shoulder operations Improve cycle stability through reduced vibration and rigid geometry The robust design with a 50 mm head diameter and a 45 mm overall length provides a solid interface to the toolholder, reducing chatter and improving surface finish. A stiffer assembly results in fewer interruptions and consistent part tolerances, which translates directly into higher first-pass yield and reduced rework. By choosing a tool head engineered for stable clamping and precise alignment, shops benefit from predictable machining times and lower total production cost per part. Extend insert life with directed internal coolant Integrated internal coolant channels deliver cutting fluid close to the cutting edge, reducing flank wear and temperature peaks at the insert edge. This targeted cooling extends the life of ADKT 1505 indexable inserts and helps maintain cut quality on demanding materials. For operations where thermal control matters, the internal coolant feature reduces the frequency of insert changes and contributes to a more reliable production rhythm. Broad compatibility and straightforward maintenance The head is specified for ADKT 1505 inserts and is compatible with the matching systems from ISCAR, simplifying inventory management when standardising on this insert family. Fixing hardware is standardised to a M4x10 torx screw requiring a T15 key, which makes replacement fast and repeatable. The accessible fastening and standardised insert seat allow technicians to perform quick swaps and maintain production continuity without specialised tooling. Practical application advice and measurable advantages Configured with a 90° cutting angle and five effective cutting edges, the component is optimised for shoulder cuts and face-turning where square shoulders and defined corner radii are required. The modest mass of 0.394 kg helps keep dynamic loads predictable while the compact form factor supports closer centre-line approaches in tight setups. These measurable characteristics make the head suitable for job-shop turning, medium-batch production and mixed-material machining where setup flexibility and repeatability are priorities. Contact Metav Werkzeuge today for expert advice and procurement of the Teknik Makina corner tool head with internal coolant (SKU T202-1TM) to ensure the correct configuration for the intended application. Technical data SKU: T202-1TM Manufacturer: Teknik Makina Product type: Corner tool head Core specifications Diameter: 50 mm Overall length: 45 mm Weight: 0.394 kg Cutting angle: 90° Cutting edges: 5 Torx screw: M4x10 Torx key: T15 Materials & features Internal coolant For ADKT 1505 indexable inserts Compatible with ISCAR inserts Manufacturer: Teknik Makina FAQ What inserts are compatible with this corner tool head? The corner tool head is designed for ADKT 1505 indexable inserts and is compatible with the matching insert systems from ISCAR, ensuring straightforward replacement and inventory alignment. Does the head provide internal coolant and what is the benefit? Yes — internal coolant is integrated into the design; this directs coolant to the cutting edge, lowering temperatures and extending insert life for more reliable production. Which fastening hardware is required for insert fixation? Insert fixation uses an M4x10 torx screw operated with a T15 key, allowing fast and repeatable insert changes on the shop floor. Is this component suitable for shoulder turning and face operations? The 90° cutting geometry and compact form make the head well suited to shoulder and face-turning tasks where defined corners and square shoulders are required. What is the product SKU for ordering and reference? Reference SKU T202-1TM when enquiring or ordering the Teknik Makina corner tool head to ensure the correct configuration is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable chip control and a robust 50 mm body deliver consistent turning results, while the internal coolant port helps extend insert life and reduce rework. Order the corner tool head directly via Metav Werkzeuge or consult our advisors for specification support. Corner tool head T352-1TM — 50 mm, internal coolant, for ADMT 1606 indexable inserts (Teknik Makina) A corner tool head intended for precision external turning and facing operations with ADMT 1606 indexable inserts, engineered for stable machining and straightforward integration into existing tool posts. 50 mm diameter for stable cutting Internal coolant for improved chip evacuation Compatible with ADMT 1606 indexable inserts (Walter) 90° cutting angle for square-shoulder turns Faster cycle times through coolant-fed rigidity The combination of a 50 mm body and a coolant channel means the head keeps the insert cooler and the cutting zone clearer. The integrated internal coolant reduces heat at the cutting edge and promotes better chip breaking, which in turn contributes to longer insert life and fewer unplanned tool changes. For production environments where uptime and consistent cycle time matter, this design delivers measurable efficiency gains without complex adaptations. Plug-and-run compatibility to shorten setup Designed for ADMT 1606 style inserts and compatible with inserts from Walter, the head eases inventory and setup complexity. The rotary geometry provides a reliable 90° cutting angle suitable for square-shoulder and facing cuts, reducing the need for special inserts. Because the component accepts the standard fixing arrangement, adoption is quick and repeatable across multiple machines, helping to reduce changeover time on the shop floor. Secure clamp and maintenance-friendly fastenings The cutter head secures its insert with a M4x10 Torx screw and is driven with a T15 key, a common specification that simplifies maintenance and replacement procedures. The compact overall length of 45 mm and modest weight of 0.397 kg make handling and tool change straightforward, while the standard fasteners ensure repeatable clamping torque and positional accuracy. These practical design choices reduce handling errors and support stable cutting conditions. Practical benefits and recommended applications This indexable corner head is best suited to external turning, shoulder work and light facing tasks where coolant supply is available. Its combination of size, coolant capability and standard interface makes it a good fit for small-batch production as well as medium-series machining where repeatability and tool life are priorities. The robust construction supports consistent surface finish and dimensional stability, meaning fewer inspection reworks and a smoother production flow overall. For reliable, coolant-capable turning heads from Teknik Cutting Tools, contact Metav Werkzeuge for a tailored recommendation and prompt delivery from Emmerich. Technical data SKU: T352-1TM Product type: Corner tool head Brand: Teknik Makina Label: 50mm Eckmesserkopf ADMT 1606 L45mm mit Innenkühlung UID: T352-1TM Facts Diameter: 50 mm Overall length: 45 mm Weight: 0.397 kg Cutting angle: 90° Number of cutting edges: 5 Special features Internal coolant: yes Compatible inserts: ADMT 1606 Compatible insert manufacturer: Walter Fixing screw: M4x10 (Torx T15) FAQ What inserts fit this head? The corner tool head accepts ADMT 1606 indexable inserts and is specified as compatible with inserts from Walter for straightforward replacement. Is coolant supply required for optimal performance? The head features internal coolant, which improves cutting performance and insert life; while not strictly required, coolant use is recommended for best results. Which screw and key are used to secure the insert? Insert clamping uses an M4x10 Torx screw, tightened with a T15 key to ensure repeatable clamping torque. Can this head be used for shoulder turning and facing? Yes, the 90° geometry and rigid 50 mm body make it suitable for square-shoulder turning and facing operations in both single-piece and small-series production. What are the handling dimensions and weight? Overall length is 45 mm and the weight is approximately 0.397 kg, supporting easy tool changes and stable mounting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact right‑angle design with internal coolant and a precise 50 mm diameter for reliable shoulder machining; take advantage of fast insert changes and robust clamping for uninterrupted production. Order the tool directly via Metav Werkzeuge or consult our specialists for application support. Right‑angle indexable head T398‑1TM by Teknik Makina — 50 mm with internal coolant A Right‑angle indexable head designed for accurate shoulder turning and facing in confined setups, compatible with 3PKT 1505 indexable inserts Compact 50 mm diameter for tight setups Internal coolant for better tool life 90° cutting geometry for square shoulders Taegutec‑compatible insert clamping Precise geometry that reduces cycle time and setup complexity The Right‑angle indexable head delivers a stable cutting platform with a 90° cutting angle and 50 mm tool body, which together reduce vibration and maintain consistent edge engagement during shoulder and face cuts. The compact 40 mm overall length helps to reach confined bores and tight fixtures without sacrificing rigidity. Designed for use with 3PKT 1505 indexable inserts, the head supports fast insert indexing and repeatable seating, so cycle times are reduced and rework is minimised. The result is a dependable tool life and predictable process capability for production and jobbing environments. Coolant‑through design for longer insert life and improved surface finish Equipped with internal coolant, the tool head directs cutting fluid close to the cutting zone to lower temperatures and improve chip control. This coolant‑through approach reduces thermal wear on the insert and supports better surface integrity on the workpiece, especially in continuous machining tasks. Secure clamping is achieved with the supplied M4x10 torx screw, tightened with a T15 key, ensuring repeatable insert retention and safe operation at elevated cutting parameters. For workshops seeking consistent finishes and fewer insert changes, the coolant feed and robust clamping together provide tangible process benefits. Built for integration and dependable sourcing in production workflows Weighing 0.325 kg and supplied under SKU T398‑1TM, the head is manufactured by Teknik Makina and tuned for compatibility with standard toolholders and Taegutec‑compatible inserts. Its five cutting edges arrangement supports multiple index positions where applicable, increasing productive cutting life per insert. The compact form factor allows straightforward integration into existing turret or milling setups while preserving access for automatic tool changers or manual changeovers. For procurement, Metav combines wide availability with technical screening from its Emmerich hub to ensure reliable supply and quality control across the European market. Contact Metav Werkzeuge to discuss Teknik Makina's T398‑1TM right‑angle head with internal coolant and confirm the ideal configuration for the workshop environment Technical data SKU: T398-1TM Manufacturer: Teknik Makina ECLASS: 21181015 Core dimensions Diameter: 50 mm Overall length: 40 mm Weight: 0.325 kg Cutting angle: 90° Cutting edges: 5 Features & compatibility Coolant through: yes For indexable inserts: 3PKT 1505 Compatible insert manufacturer: Taegutec Torx screw: M4x10 Torx key: T15 FAQ Which inserts fit this head? The head is designed for 3PKT 1505 indexable inserts and is compatible with Taegutec‑type inserts specified for that geometry. Is the coolant delivered through the tool body? Yes; the tool head has internal coolant that supplies cutting fluid directly to the cutting zone to support chip evacuation and thermal control. What size and angle does the tool support? The body has a 50 mm diameter with a 90° cutting geometry suitable for square shoulder and facing operations. How is the insert secured? Inserts are retained with a torx screw (M4x10) tightened using a T15 key for repeatable and secure clamping. Can this head be used in tight fixtures or short overhangs? The compact 40 mm overall length and robust body make the head suitable for applications with limited space while maintaining rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Taking advantage of a compact 90° corner cutting head that accepts APMT 0602–0903 indexable inserts and a robust Ø 50 mm head with a 22 mm shank ensures stable turning, quick insert changes and consistent surface quality — order directly via Metav Werkzeuge or consult the specialists for optimal integration into production. Corner tool head – 90° turning head for APMT 0602–0903 indexable inserts by Teknik Makina The Corner tool head is a compact turning head designed for 90° finishing and profiling operations with APMT 0602–0903 indexable inserts in metalworking and precision turning applications. Turning head for APMT 0602–0903 indexable inserts Precisely set 90° cutting angle for finishing cuts Ø 50 mm head with 22 mm shank diameter Secured with M2.5×5.5 Torx screw (T8 key) Consistent geometry for dependable turning performance The holder features a defined 90° cutting angle, which delivers a repeatable approach geometry for interrupted or continuous cuts. By fixing the cutting direction, the tool head reduces vibration influences and delivers a predictable contact zone between insert and workpiece; this helps to improve surface finish and extend tool life. The design is especially suitable for parts where axial alignment and a flat shoulder are required, such as short-run production, component profiling and fine finishing passes. The controlled geometry aids process planning and reduces the need for extensive rework. Fast insert changes and secure clamping for reduced downtime Changeovers are facilitated by a standardised Torx screw M2.5×5.5 and the matching T8 key, allowing rapid insert replacement without complex fixtures. The indexable insert pocket is compatible with APMT 0903 forms and is suited to Korloy-manufactured inserts, enabling interchangeability with common industry grades. Quick, repeatable clamping reduces set-up time and supports productivity improvements on multi-shift lines. Furthermore, the compact mass (approx. 0.35 kg) and sturdy attachment contribute to stable cutting conditions even at moderate feed rates. Compact footprint that suits confined toolposts and stable setups With a Ø 50 mm head and a 22 mm shank, the tool head is engineered for a balance between accessibility and rigidity in tight toolpost arrangements. The overall height of 40 mm and the provision for multiple cutting edges (6) support economical use of the insert body and permit indexing for continued operation without interrupting production flow. The combination of compact dimensions and robust mounting delivers consistent repeatability, which is essential for small-run precision turning and batch work where tool accessibility and machine clearance are limiting factors. For precision 90° turning operations, specify the Teknik Makina corner tool head (SKU T240TM) via Metav Werkzeuge — for tailored advice and integration support contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T240TM Manufacturer: Teknik Makina Shank diameter: 22 mm Head diameter: 50 mm Overall height: 40 mm Weight: 0.35 kg Cutting angle: 90° Number of cutting edges: 6 Compatible inserts: APMT 0903 (APMT 0602–0903) Compatible insert manufacturer: Korloy Torx screw: M2.5x5.5 Torx key: T8 Application: 90° turning / finishing / profiling FAQ Which insert types fit this turning head? The corner tool head is compatible with APMT 0602–0903 indexable inserts, including Korloy grades specified for APMT 0903 forms. What is the required shank diameter for mounting? A 22 mm shank is required for installation; this dimension ensures correct seating and rigidity for the holder. How is the insert fastened and which tool is needed? Inserts are secured with an M2.5×5.5 Torx screw using a T8 key, enabling fast and repeatable clamp action. Is the tool head suitable for precision finishing? Yes — the fixed 90° cutting angle and stable head geometry are optimised for finishing cuts and high repeatability in profiling tasks. What are the main dimensions and mass of the head? Key dimensions are Ø 50 mm head diameter, 40 mm overall height and approximately 0.35 kg mass, which suits compact toolpost arrangements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact toolholder that combines 90° geometry, secure Torx clamping and compatibility with SECO LOEX 1207 indexable inserts for reliable shoulder machining and fast insert changes; order directly via Metav Werkzeuge or consult their specialists for specifications and fast dispatch from Emmerich. Corner insert head 90° for LOEX 1207 indexable inserts — Teknik Makina The corner insert head is a 90° toolholder designed for LOEX 1207 indexable inserts, engineered for precise shoulder cuts and robust steel machining. *90° geometry for precise shoulder machining *Compatible with SECO LOEX 1207 indexable inserts *22 mm shank diameter for secure mounting *M4x10 Torx clamping screw, T15 key required Consistent 90° geometry for accurate shoulder faces The 90° geometry of this toolhead ensures repeatable shoulder and face cuts, reducing set-up time and minimising secondary operations. Built for compatibility with LOEX 1207 indexable inserts, the design delivers a predictable cutting position and chip flow that benefits mid- and high-volume turning. Precision of the cutting angle is translated into consistent part tolerances, so the toolholder supports efficient production runs and fewer reworks. Secure clamping and fast indexable insert changes Clamping is executed with an M4x10 Torx screw and requires a T15 key, providing firm fixation with simple torque control. The head accepts inserts with five usable edges, allowing multiple indexing steps before replacement and extending usable life per insert. The 22 mm shank provides stable seating in the turret or holder, helping to reduce vibration and improve surface finish on workpieces when machining steel. Compact dimensions for flexible workshop use With an outer diameter of 50 mm, an overall height of 40 mm and a weight of 0.36 kg, the head is compact yet rigid — suitable where space on the turret is limited but sturdiness is required. The combination of small footprint and robust construction makes the head a pragmatic choice for general workshop and subcontracting environments that demand reliable performance without complex handling. Choose the Teknik Makina corner insert head for dependable 90° shoulder machining and contact Metav Werkzeuge for tailored advice or to arrange immediate dispatch from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T586TM Brand: Teknik Makina Product: Corner insert head for LOEX 1207 indexable inserts Compatible inserts manufacturer: SECO Facts Cutting angle: 90° Shank diameter: 22 mm Diameter: 50 mm Overall height: 40 mm Weight: 0.36 kg Number of cutting edges: 5 Special features Torx clamping screw: M4x10 Torx key size: T15 Compatible inserts: LOEX 1207 SKU: T586TM FAQ Which indexable inserts fit this head? The head is designed for LOEX 1207 indexable inserts; compatibility is specified for SECO-type LOEX 1207 inserts. What is the clamping method for insert retention? Retention is by an M4x10 Torx clamping screw; the head requires a T15 key for secure tightening. Is the head suitable for heavy-duty steel machining? The corner insert head offers a robust shank and firm clamping, making it suitable for demanding steel turning where a 90° shoulder is required. How many times can an insert be indexed? The accepted LOEX 1207 inserts provide multiple usable edges; the head accommodates inserts with five cutting edges before replacement or reconditioning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust clamping, precise 90° cutting geometry and simple tool change for uninterrupted turning operations — order the component via Metav Werkzeuge or consult our technical team for integration advice. Eckmesserkopf T202TM — 90° corner turning head for ADKT 1505 indexable inserts (Teknik Makina) The Eckmesserkopf is a compact 90° turning head optimised for external shoulder and facing operations with ADKT 1505 indexable inserts, engineered for reliable integration into workshop and CNC tool systems. Corner head »Eckmesserkopf« for ADKT 1505 inserts 90° cutting angle for square and facing operations Ø50 mm body with 22 mm shank diameter Torx M4x10 fastening, T15 key required Accurate 90° geometry for repeatable shoulder machining The corner turning head delivers a defined 90° cutting geometry, which ensures consistent shoulder faces and square corners on turned parts. By accepting standard ADKT 1505 indexable inserts, the head provides a quick-change solution that reduces set-up time and supports predictable tool life. The design promotes a stable cutting position that reduces chatter and contributes to improved surface finish, making it suitable for batch production where dimensional repeatability is critical. Stable mounting and secure fastenings for vibration control Constructed with a compact Ø50 mm body and a 22 mm shank, the tool head offers a rigid interface to the toolholder, limiting deflection under load. The insert is retained by a Torx M4x10 screw tightened with a T15 key, ensuring a secure clamp and consistent seat pressure every change. The component’s modest mass of 0.394 kg and a total length of 45 mm facilitate rapid tool changes while maintaining the stiffness required for fine turning and facing tasks. Designed for compatibility with common inserts and systems This indexable insert head is specified for ADKT 1505 inserts and is listed as compatible with ISCAR insert types, enabling use of widely available cutting grades and geometries. The standardised insert format simplifies inventory management and makes the head a practical choice for workshops looking to harmonise tooling across multiple lathes. The head’s configuration supports straightforward conversion between roughing and finishing inserts to match material and process requirements. Practical handling that reduces downtime With a clear fastening method and compact dimensions, maintenance and insert replacement are fast and repeatable. The head features five dedicated cutting-edge positions for efficient indexing, reducing the need for spare tool bodies and lowering overall tooling costs. Its balanced design aids handling during set-up, and the standardised mounting dimensions make it straightforward to integrate into existing tool posts or turret systems without elaborate adapters. For precise corner turning with proven ADKT 1505 compatibility, contact Metav Werkzeuge GmbH for ordering and technical guidance — info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T202TM Manufacturer: Teknik Makina Core specifications Diameter: 50 mm Shank diameter: 22 mm Overall length: 45 mm Weight: 0.394 kg Cutting angle: 90° Cutting edges: 5 Features & compatibility For ADKT 1505 indexable inserts Compatible with ISCAR inserts Torx screw M4x10 Torx key T15 required 22 mm shank for standard holders FAQ What insert type does the turning head accept? The corner turning head accepts ADKT 1505 indexable inserts, offering compatibility with common chipbreaker and grade variants. Is the head compatible with ISCAR inserts? Yes, the head is listed as compatible with ISCAR insert types for ADKT 1505, enabling use of widely available cutting grades. What fastening hardware is required for insert clamping? Insert clamping uses a Torx M4x10 screw tightened with a T15 key to ensure secure and repeatable retention. What are the mount dimensions for the tool head? The tool head has a 22 mm shank diameter and a body diameter of Ø50 mm, facilitating integration into standard holders. How many indexing positions are available on the head? The component provides five cutting edges, allowing multiple indexings before insert replacement is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-rigidity turning solution with a 50 mm head diameter and a 22 mm shank for stable set-ups; the 90° cutting angle ensures precise square-shoulder cuts while compatibility with ANHX 1004 indexable inserts keeps tooling costs predictable. Order directly via Metav Werkzeuge or ask our consultants for application advice. Eckmesserkopf T657TM – corner turning head, 50 mm diameter, 90° cutting angle (Teknik Makina) The Eckmesserkopf is a corner turning head for ANHX 1004 indexable inserts, engineered for precision shoulder and facing operations in turning applications 50 mm head diameter for rigid set-up 90° cutting angle for square shoulder cuts Compatible with ANHX 1004 Palbit inserts Fast clamping with M3x7 Torx screw Accurate shoulder cuts and reliable rigidity The turning head delivers a compact solution for repeatable square-shoulder machining thanks to its 50 mm head diameter and 90° cutting angle, which combine to reduce deflection during interrupted cuts. The unit’s 22 mm shank contributes to a stable clamping interface in standard toolholders, improving surface finish and dimensional consistency. Designed for indexable insert technology, the head accepts ANHX 1004 inserts, translating indexable insert benefits—fast edge changes and consistent cutting geometry—into lower process downtime and predictable tool costs. Secure clamping and straightforward insert changes A robust clamping design with the supplied M3x7 Torx screw and matching T8 key enables quick insert replacement while maintaining repeatable seat location and torque. The tool’s modest overall length of 40 mm and mass (approx. 0.347 kg) help balance the assembly, decreasing vibration at higher spindle speeds and extending insert life. Practical maintenance is supported by a simple fastener system; correct use of the Torx key ensures consistent clamping force and reduces the risk of misalignment during production. Practical benefits in production workflows Suitable for general turning and finishing tasks where square shoulders and precise depths are required, this corner turning head provides a reliable mechanical interface for Palbit-compatible indexable inserts. The presence of five cutting edges on compatible inserts (per insert specification) provides multiple resharpen-equivalent edges before replacement, delivering cost efficiency. Specified dimensions and repeatable clamping aid programming accuracy and shorten set-up times, making the head a pragmatic choice for batch production and mixed-job workshops seeking consistent results. For expert advice on integrating this Teknik Makina corner turning head into an existing toolchain or to place an order, contact Metav Werkzeuge for tailored recommendations and reliable supply from Emmerich; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T657TM Manufacturer: Teknik Makina Facts Head diameter: 50 mm Overall length: 40 mm Shank diameter: 22 mm Weight: 0.347 kg Cutting angle: 90° Torx key: T8 Torx screw: M3x7 Number of cutting edges: 5 Special features For ANHX 1004 indexable inserts Compatible with Palbit inserts Corner turning / square-shoulder application Compact, rigid design FAQ What insert type does this turning head accept? The turning head accepts ANHX 1004 indexable inserts; compatibility with Palbit variants is indicated for flexible tooling choices when using the T657TM corner head from Teknik Makina. What are the critical dimensions for setting up the tool? Relevant dimensions include a 50 mm head diameter, 22 mm shank diameter and 40 mm overall length for correct insertion and clamping in compatible toolholders. Which fastener and key are required for insert clamping? Clamping is achieved with an M3x7 Torx screw, tightened with a T8 Torx key to ensure secure, repeatable seat location on the T657TM head. Is the head suitable for heavy roughing or finishing? The compact, rigid design and 90° cutting angle are optimised for precise shoulder and finishing operations; suitability for heavy roughing depends on machine power, insert grade and cutting parameters. How does the head contribute to shorter set-up times? Standardised dimensions and a simple Torx clamping system allow fast insert changes and consistent positioning, reducing downtime during tool changes and enabling quicker return to production. Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precision engineering, integrated coolant capability and compact design for reliable shoulder machining. The 50 mm diameter head with internal coolant ensures stable cutting conditions and reduced chip build-up; order the Eckmesserkopf directly via Metav Werkzeuge or ask our consultants if needed. Eckmesserkopf (T177-1TM) – 50 mm head with internal coolant for APKT 1003 indexable inserts by Teknik Makina The Eckmesserkopf is a 90° shoulder cutting head designed for turning and facing operations, compatible with APKT 1003 indexable inserts and intended for precision components in CNC production environments. 50 mm head diameter Internal coolant channel For APKT 1003 indexable inserts 40 mm overall length Compatible with Korloy inserts Precision and process stability for shoulder turning Engineered for repeatable right‑angle cuts, this indexable insert head provides a 90° cutting angle and a compact 40 mm overall length, delivering consistent shoulder faces and reduced vibration in short overhang applications. The integrated internal coolant channel supplies cooling directly to the cutting edge, improving chip evacuation and prolonging insert life. Such features translate into predictable cycle times and fewer secondary operations when machining shoulders and steps. Fast setup and secure clamping for production use The design allows quick mounting and secure fastening: the cutting heads use a T8 Torx key and M2.5x5.5 Torx screws for reliable clamping of the insert seats. The construction supports six indexed positions where applicable, which helps to extend service intervals and reduces tool change frequency. For workshops and production lines requiring efficient tooling changeover, this head minimises downtime while maintaining machining accuracy. Compatibility and tooling strategy Designed specifically for APKT 1003 indexable inserts and optimised for compatibility with Korloy insert grades, the head integrates seamlessly into established tooling setups. Using standard insert geometries simplifies logistics and enables the selection of grades for finishing or more aggressive stock removal without altering the holder. The compact 50 mm diameter and modest mass suit machines with limited clearance or short‑reach tool posts. Practical benefits for workshop reliability Beyond machining performance, the head’s compact form and robust fastening deliver straightforward maintenance and inspection. The internal coolant reduces thermal load at the cutting zone, which contributes to dimensional stability over a production run. Where repeatable shoulders and clean part finishes are required, this tool head supports consistent quality with minimal adjustment. For ordering, technical clarification or to request matching inserts, contact Metav Werkzeuge — Manufacturer / Responsible: Teknik Cutting Tools; for assistance email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T177-1TM Manufacturer: Teknik Makina Product type: Eckmesserkopf Weight: 0.398 kg Core dimensions Diameter: 50 mm Overall length: 40 mm Cutting angle: 90° Number of cutting edges: 6 Torx screw: M2.5x5.5 Torx key: T8 Features & compatibility Internal coolant channel For APKT 1003 indexable inserts Compatible with Korloy inserts SKU: T177-1TM FAQ What insert type fits this tool head? The head accepts APKT 1003 indexable inserts; the design and seat geometry are matched for those inserts and for Korloy grades where applicable. Is there internal coolant supply? Yes, the Eckmesserkopf features an internal coolant channel that directs cutting fluid to the insert vicinity for improved chip control and tool life. Which key and screws are required for assembly? Assembly and insert clamping use a T8 Torx key and M2.5x5.5 Torx screws as supplied for the clamping system. Is the tool suitable for machines with limited overhang? The compact 50 mm diameter and 40 mm overall length make the head well suited to short‑reach applications and machines with restricted clearance. How many active cutting positions are available? The toolhead accommodates indexed inserts and provides multiple cutting edges to extend service intervals under normal operating conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com