Gibt es einen Hahn und Kolb Online Shop?

Robust 80 mm corner tool head with internal coolant and compatibility for TNKT 1606 indexable inserts; the rigid design and 90° cutting angle deliver stable turning and long insert life. Order the corner tool head for TNKT 1606 indexable inserts directly via Metav Werkzeuge or ask our consultants if needed. Corner tool head for TNKT 1606 indexable inserts — 80 mm diameter, internal coolant (Teknik Makina) A compact, heavy‑duty corner tool head engineered for external turning and facing operations with TNKT 1606 indexable inserts, combining rigidity and coolant delivery for consistent results on production lathes. 80 mm diameter for stable cutting Internal coolant for efficient chip control Compatible with TNKT 1606 inserts by Korloy Eight cutting edges with 90° cutting angle Increased rigidity and consistent surface quality The wide 80 mm diameter and compact 50 mm overall length reduce overhang and vibration, which directly benefits machining accuracy and surface finish. The larger cross section increases toolholder stiffness, enabling higher feed rates or heavier cuts without compromising the process. For production environments where repeatability matters, this configuration supports reduced scrap rates and longer uninterrupted cycles by keeping cutting forces stable and predictable. Internal coolant for longer insert life and safer chip control Integrated internal coolant supplies cutting fluid directly to the cutting zone, lowering tool temperature and improving lubrication at the interface. This targeted cooling reduces thermal wear on the insert and minimises built‑up edge formation, which in turn extends insert life and maintains dimensional accuracy. In sectors where downtime is costly, the combination of coolant delivery and controlled chip flow helps sustain throughput and reduces the frequency of manual intervention. Compatibility and serviceability for uninterrupted production Designed for TNKT 1606 indexable inserts from Korloy, the toolhead uses M4x10 Torx screws with a T15 drive for secure clamping and straightforward insert changes. The head provides eight cutting edges and a standard 90° cutting angle, facilitating quick indexing and predictable chip geometry. The modest weight (approx. 1.118 kg) and standard interfaces simplify integration into existing turning tool systems, supporting a rapid return to production after maintenance. For application advice or to ensure the best match for a specific turning task, contact Metav Werkzeuge in Emmerich — our specialists can advise on tooling combinations and supply the Teknik Makina corner tool head ready for immediate delivery. Technical Data SKU: T595TM Product type: Corner tool head Brand: Teknik Makina Article name: Corner tool head for TNKT 1606 indexable inserts ECLASS: 21181015 Core data Diameter: 80 mm Total length: 50 mm Weight: 1.118 kg Cutting angle: 90° Cutting edges: 8 Special features Internal coolant Compatible with TNKT 1606 inserts (Korloy) Torx screw: M4x10 Torx key: T15 FAQ Which indexable inserts fit this tool head? The corner tool head is designed for TNKT 1606 indexable inserts, compatible with inserts from Korloy and other manufacturers following the same insert designation. Is there internal coolant and how does it benefit machining? Yes — the head features internal coolant, which directs fluid to the cutting zone to reduce thermal wear, improve lubrication and assist chip evacuation for longer insert life. What fasteners are used for the inserts? Inserts are secured with M4x10 Torx screws, driven with a T15 key for reliable clamping and simple replacement. How many cutting edges does the head provide and what is the angle? The tool head presents eight cutting edges and a 90° cutting angle, enabling consistent chip formation and easy indexing. What are the main dimensions and mass of the component? Key dimensions are 80 mm diameter and 50 mm total length; the mass is approximately 1.118 kg, suitable for standard turning tool posts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust geometry and simple insert compatibility to secure consistent 90° edges and efficient tool changes; benefit from a compact 27 mm shank and straightforward Torx clamping for fast integration into existing CNC tool chains. Order via Metav Werkzeuge or request tailored advice from our specialists. Corner Insert Head by Teknik Makina — for WNMU 0806 Indexable Inserts, 90° Cutting Angle The Corner Insert Head is an indexable cutting head designed for square-edge turning and facing operations with WNMU 0806 indexable inserts, suitable for production and workshop toolholders 90° cutting angle for precise shoulders Compatible with WNMU 0806 indexable inserts 27 mm shank diameter for standard toolholders Torx M5x12 clamping; T20 key required Consistent 90° edges from a purpose-built geometry The head delivers repeatable right-angle results thanks to its 90° cutting angle and a tool face diameter of Ø80 mm, which together promote uniform contact and stable chip control. The geometry minimises secondary finishing work by producing accurate shoulder faces on a variety of components. Designed for indexable systems, the head accepts WNMU 0806 inserts so that cutting performance can be maintained through fast insert indexing or replacement, reducing total machining cycle time. Secure clamping for minimal downtime Clamping and insert retention are engineered for reliability: the unit uses an M5x12 Torx screw and requires a T20 key for positive, reproducible torque. This simple fastening solution ensures blade seating with consistent clamping force, lowering the risk of micro-movement under load. Compatibility with Kyocera inserts provides access to a wide range of grades and geometries, enabling optimisation for finish or roughing tasks without compromising set-up speed. Compact dimensions that enhance rigidity and accessibility With a 27 mm tool shank and an overall length of 50 mm, the head balances reach and stiffness for stable cutting conditions in confined tool bays. The compact mass of 1.016 kg contributes to reduced overhang-induced vibration when compared with longer holders, improving surface finish and tool life. Its modest diameter and layout make it straightforward to fit into multi-station turrets or modular holders, supporting efficient tool population across small-batch and high-volume production. Applications, compatibility and who benefits This indexable head is suited to metal‑turning shops, contract manufacturers and maintenance workshops requiring dependable square-edge operations. The design addresses frequent needs in finishing, shoulder forming and light facing where rapid insert changes and consistent geometry are priorities. As part of a modern toolset, the head integrates into established indexable insert routines and is a practical choice for teams seeking to streamline set-up time while maintaining industrial-level repeatability. Contact Metav Werkzeuge for assistance integrating the Teknik Makina corner insert head into production tooling and to receive bespoke recommendations from our product specialists Technical data Article number: T545TM Manufacturer: Teknik Makina Compatible inserts: WNMU 0806 (indexable inserts) Compatible insert manufacturer: Kyocera Clamping screw: M5x12 Dimensions and weights Diameter: Ø80 mm Shank diameter: 27 mm Overall length: 50 mm Weight: 1.016 kg Cutting angle: 90° Number of cutting edges: 5 Features and fittings Torx key: T20 Indexable insert system compatibility Compact design for turret and holder integration FAQ What inserts fit this corner head? The corner insert head accepts WNMU 0806 indexable inserts; the design is compatible with Kyocera‑specified grades and geometries. Is the head suitable for high‑speed finishing? The indexable head (Teknik Makina, SKU T545TM) is designed for stable finishing when fitted with the appropriate insert grade and correct clamping torque. Which toolholders will accept the 27 mm shank? Holders and turrets designed for a 27 mm shank diameter are suitable; ensure the toolholder offers the correct seating and clamping for the head's compact length. How is the insert secured in the cutting head? Insert retention uses a Torx‑driven M5x12 clamping screw, tightened with a T20 key to provide consistent and secure seating. For which operations is this head optimised? The product is optimised for square‑edge turning, shoulder forming and light facing applications where repeatable 90° geometry is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High-performance machining with direct coolant delivery and proven insert compatibility ensures consistent corner turning results; robust clamping and a compact 50 mm overall length support stable cuts and reduced vibration. Order or request advice via Metav Werkzeuge for seamless supply and workshop integration. Eckmesserkopf — 80 mm corner tool head with internal coolant (Teknik Makina) The Eckmesserkopf is a 90° corner turning head designed for use with XEKT 1904 indexable inserts, ideal for precision turning tasks in production and workshop environments. 80 mm body diameter Integrated internal coolant Compatible with XEKT 1904 Korloy inserts 90° cutting angle for corner turning Enhanced productivity through purpose-built geometry The compact design combines an 80 mm diameter with a 50 mm overall length, delivering a rigid tool carrier that stabilises the cutting process and reduces chatter. This geometry supports repeatable results when performing corner and profile turning operations; the short overhang reduces bending moments and allows higher effective cutting parameters. Paired with XEKT 1904 indexable inserts, the head provides a straightforward route to optimised cycle times and predictable tool life, translating directly into improved throughput on batch and single-piece production. Direct coolant for longer insert life and cleaner chips Equipped with internal coolant, the head channels coolant directly to the cutting edge, improving heat control and evacuation of chips from the cutting zone. This targeted delivery lowers cutting temperatures and often extends insert life while enhancing surface finish on difficult-to-machine materials. The feature is particularly valuable for operations requiring consistent surface quality and reduced rework; maintenance remains simple since coolant access is integrated rather than relying on external nozzles. Secure fastening and practical workshop handling Assembly and insert clamping use a Torx T15 interface and M4x8.5 Torx screw for reliable, repeatable torque settings and quick changeovers. The head’s mass (0.791 kg) contributes to damping during cutting, and the robust clamping arrangement reduces the risk of insert movement under load. For workshops seeking straightforward serviceability, the familiar Torx interface ensures common tool availability and consistent fastening results across teams. Compatibility and application scope Designed for compatibility with Korloy XEKT 1904 inserts, this corner cutting head integrates easily into existing tool inventories that use the same insert family. The 90° cutting geometry is suited to a wide range of turning tasks including facing, profile turning and light shoulder work where a square or corner-type engagement is required. The tool head’s specification supports integration into both dedicated CNC machining centres and flexible workshop turning applications. Choose the Teknik Makina corner tool head with integrated internal coolant for consistent 90° corner turning — contact Metav Werkzeuge for technical guidance and reliable supply from Emmerich. Technical data Article number: T368TM SKU: T368TM Eclass: 21181015 Core dimensions Diameter: 80 mm Overall length: 50 mm Weight: 0.791 kg Cutting angle: 90° Cutting edges: 5 Features & compatibility Internal coolant: yes Suitable for: XEKT 1904 indexable inserts Compatible insert manufacturer: Korloy Fastening: Torx T15 Screw: M4x8.5 Product type: Corner tool head Manufacturer: Teknik Makina FAQ Which inserts fit this corner tool head? The head is designed specifically for XEKT 1904 indexable inserts and is compatible with Korloy inserts of that designation. Does the tool head provide coolant to the cutting zone? Yes, the tool head includes internal coolant to deliver fluid directly to the cutting edge for improved tool life and chip control. What fastening system is used for insert clamping? Insert clamping uses a Torx T15 interface with an M4x8.5 Torx screw to ensure consistent torque and reliable clamping. Is the head suitable for heavy overhangs? The compact 50 mm overall length and 80 mm body diameter favour rigidity; for long overhangs, reduced cutting parameters are recommended to maintain stability. Can the head be used on manual lathes and CNC turning centres? Yes, the corner tool head is suitable for both manual workshop turning and CNC applications where XEKT 1904 inserts are employed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of stable cut geometry, internal coolant and straightforward maintenance for consistent shoulder milling results; order supply or request technical advice via Metav Werkzeuge for quick delivery and expert support. Indexable corner milling head — 80 mm diameter, internal coolant (Teknik Makina) The Indexable corner milling head is a compact cutter body engineered for precise 90° shoulder milling using XNEX 0806 indexable inserts, ideal for production environments that require repeatable edges and fast insert change. 80 mm diameter for stable machining Compatible with XNEX 0806 inserts by SECO Internal coolant for effective chip evacuation 90° cutting angle for precise shoulder milling Consistent geometry for repeatable precision The robust body with an 80 mm diameter provides rigidity that reduces vibration and runout, which in turn improves surface finish and tool life. Designed to hold 7 cutting edges, the head distributes cutting forces evenly and supports consistent radial stability during shoulder and face milling. The fixed 90° cutting angle ensures a true right-angled shoulder without the need for secondary finishing, which shortens cycle times and lowers the risk of rework. Such mechanical consistency benefits production workflows where dimensional repeatability is paramount. Enhanced coolant routing for process reliability Integrated internal coolant channels deliver cutting fluid directly to the cutting zone, improving chip breaking and heat dissipation at higher feed rates. This internal supply supports sustained cutting performance and helps maintain tight tolerances over longer tool life. The coolant feed, combined with optimised insert seating, reduces built-up edge and supports stable cutting when machining interrupted surfaces. For maintenance, insert screws use a Torx drive (T15) and standard M4x12.5 fastening, which simplifies scheduled replacement and minimises downtime. Broad compatibility and simple workshop handling Engineered for XNEX 0806 indexable inserts and compatible with inserts from SECO, the head integrates into existing tool inventories without the need for custom tooling. With an overall length of 50 mm and a compact mass of about 1.063 kg, the head fits into tight tool changer envelopes while offering enough mass for stable cuts. The product is supplied as a ready-to-use head compatible with standard clamping hardware, supporting fast insert indexing and straightforward spares management. The designation T844-1TM identifies the exact configuration for procurement and stock control. Contact Metav Werkzeuge for specific cutting data, compatibility checks or to arrange supply of the Teknik Makina indexable corner milling head — call +49 2822 7131930 or email info@metav-werkzeuge.com for prompt technical advice and delivery options. Technical Data SKU: T844-1TM Manufacturer: Teknik Cutting Tools Product type: Indexable corner milling head Label: 80 mm indexable corner milling head XNEX 0806 L50 mm with internal coolant Facts Diameter: 80 mm Overall length: 50 mm Weight: 1.063 kg Cutting angle: 90° Number of cutting edges: 7 Mount diameter: 27 mm Torx key: T15 Torx screw: M4x12.5 ECLASS: 21181015 Special features Internal coolant Compatible with XNEX 0806 indexable inserts Compatible insert manufacturer: SECO SKU/ID: T844-1TM FAQ Which insert type fits this milling head? The head accepts XNEX 0806 indexable inserts; compatibility with SECO-produced XNEX 0806 inserts is confirmed for the Teknik Makina indexable corner milling head (SKU T844-1TM). Is there internal coolant supply? Yes, the tool features internal coolant channels that deliver cutting fluid directly to the cutting zone to aid chip control and temperature management. What is the designated cutting angle for this head? The design provides a precise 90° cutting angle, optimised for right-angled shoulder milling and accurate face finishes. Which fastening hardware is required for insert changes? Insert clamping uses a Torx T15 drive and M4x12.5 screws as supplied; the Torx interface simplifies toolroom maintenance and repeatable torque application. Where does this head best apply in production? The head is intended for shoulder and face milling operations where a firm, repeatable 90° geometry is required; it integrates with existing XNEX 0806 insert toolsets to support continuous production. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable machining results through the combination of an 80 mm tool diameter, internal coolant and compatibility with XNKT 0805 indexable inserts; ideal for consistent shoulder and corner operations. Order the tool via Metav Werkzeuge or consult their specialists for application recommendations. Corner milling head for XNKT 0805 indexable inserts — 80 mm, internal coolant (Teknik Makina) A corner milling head designed for precision shoulder and face machining, optimised for XNKT 0805 indexable inserts and industrial production environments. 80 mm tool diameter, stable runout Integrated internal coolant Compatible with Korloy XNKT 0805 inserts Torx T15 assembly with M4x10 screws High-performance cutting for predictable cycle times The Corner milling head (SKU T906-1TM) delivers stable cutting performance thanks to its 80 mm diameter and seven cutting edges, which together support efficient material removal in shoulder and fillet operations. The internal coolant supply reduces thermal load at the cutting zone, slowing tool wear and helping to maintain dimensional consistency over longer runs. A defined 90° cutting angle provides reliable contact geometry for square shoulders, while the compatibility with XNKT 0805 inserts ensures a wide choice of grades and coatings for specific materials. This configuration is aimed at improving machining stability and lowering unplanned stoppages through predictable tool life. Compact, serviceable design that speeds setup With an overall length of 50 mm and a measured mass of 1.015 kg, the tool head combines rigidity with a compact footprint that eases toolchanger access and magazine space planning. Assembly uses M4x10 fastening hardware with a Torx T15 drive, simplifying repeatable clamping and maintenance tasks. The tool geometry and balanced mass distribution reduce vibration, contributing to better surface finish and longer insert life. Compatibility with Korloy XNKT 0805 inserts also streamlines procurement and inventory management in workshops that already use that insert family. Industrial readiness and straightforward maintenance Built for routine workshop use, the head’s internal coolant routing supports both wet cutting and coolant‑through strategies, improving chip evacuation and cooling efficiency. The indexable insert system reduces overall tooling costs by allowing rapid insert changes without regrinding or reconditioning the head. Routine maintenance is limited to insert changes and periodic inspection of the coolant channels and fasteners; the Torx T15 drive ensures secure assembly and straightforward service intervals. Supplied by Teknik Makina and distributed via Metav Werkzeuge, the tool head is intended to integrate into established production processes with minimal adaptation. For application-specific advice or to request the T906-1TM corner milling head from Teknik Makina, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: T906-1TM Manufacturer: Teknik Makina Product type: Corner milling head Label: 80 mm corner milling head XNKT 0805 L50 mm with internal coolant ECLASS: 21181015 Diameter: 80 mm Overall length: 50 mm Weight: 1.015 kg Internal coolant: Yes Compatible inserts: XNKT 0805 (Korloy) Cutting edges: 7 Cutting angle: 90° Screw type: M4x10 Torx T15 UID: T906-1TM Facts Diameter: 80 mm Length: 50 mm Weight: 1.015 kg Cutting edges: 7 Cutting angle: 90° Screw size: M4x10 Special features Internal coolant Compatibility with Korloy XNKT 0805 inserts Torx T15 assembly Indexable insert system Robust 80 mm tool diameter FAQ Is this tool compatible with Korloy XNKT 0805 inserts? Yes. The corner milling head accepts XNKT 0805 indexable inserts and is listed as compatible with Korloy insert grades. What operations is the head best suited for? The head is optimised for shoulder milling, face work and corner relief tasks where a 90° cutting angle and a stable 80 mm diameter provide repeatable results. How is coolant delivered to the cutting zone? Coolant is supplied via an internal coolant channel within the head, improving cooling at the insert rake face and supporting chip evacuation. What fastening hardware is required for assembly? Assembly uses M4x10 screws with a Torx T15 drive for secure clamping and straightforward maintenance. What is the product designation and supplier for ordering? The tool is supplied as SKU T906-1TM from Teknik Makina and is available through Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a sturdy, precision-designed tool head that combines reliable 90° cutting geometry with fast insert changes and proven compatibility with SECO-style indexable inserts; order the Teknik Makina item directly via Metav Werkzeuge or consult our specialists for integration advice. Indexable corner tool head (T524TM) — 90° cutting geometry, Ø 80 mm (Teknik Makina) Indexable corner tool head (T524TM) for precise turning and facing operations, designed to accept XOMX 1806 indexable inserts and to fit workshop toolholders requiring a 27 mm clamping bore 90° cutting geometry for predictable cuts For XOMX 1806 indexable inserts Compatible with SECO insert systems Body diameter Ø 80 mm for rigidity Torx screw M4.5×11 with T15 key Improved process reliability through consistent 90° geometry The 90° cutting angle delivers repeatable engagement and a defined contact zone that simplifies set-up and reduces the need for frequent repositioning. With this geometry, the holder stabilises insert seating and supports consistent chip formation, which benefits cycle-time and surface quality. The compact head form minimises overhang while the overall design supports a steady cutting path, making it suitable for repetitive production runs where process fidelity is paramount. Fast insert changes and workshop-friendly maintenance Designed for XOMX 1806 indexable inserts, the holder uses a standard Torx screw M4.5×11 with a T15 key to secure the insert, enabling swift replacements and straightforward maintenance. The combination of a common fixing method and compatibility with SECO-type inserts reduces downtime and simplifies stocking of spare parts. Quick-change capability lowers tool-change time and makes the component a pragmatic choice for mixed production environments and job-shop settings. Rigid construction for stable machining and improved finish With a body diameter of 80 mm and a compact overall length of 50 mm, the tool head provides a balance of mass and accessibility; the additional mass (approx. 1.082 kg) helps damp vibration and supports a cleaner surface finish under moderate cutting forces. The holder’s 27 mm clamping bore suits many common toolholders, giving a secure interface that improves repeatability. These attributes make the unit a robust option where stability and repeatable outcomes are required. For specification matching, supply logistics or integration into an existing toolline, contact Metav Werkzeuge for purchasing and technical advice regarding this Teknik Makina indexable corner tool head (SKU T524TM) Technical Data SKU: T524TM Manufacturer: Teknik Makina Designation: Indexable corner tool head for XOMX 1806 indexable inserts Weight: 1.082 kg Fixing screw: M4.5×11 (Torx T15) Core specifications Body diameter: 80 mm Clamping bore / holding diameter: 27 mm Overall length: 50 mm Cutting angle: 90° Number of cutting edges: 7 Features / Compatibility For XOMX 1806 indexable inserts Compatible with SECO-style inserts Torx screw M4.5×11, key T15 Compact design for reduced overhang FAQ Is this tool head compatible with SECO inserts? Yes. The indexable corner tool head (SKU T524TM) is specified as compatible with SECO-style indexable inserts and accepts XOMX 1806 sizes. What screw and key are required for insert retention? Insert retention uses an M4.5×11 Torx screw, tightened with a T15 Torx key as specified for the T524TM holder. What are the main dimensions to check for machine compatibility? Key dimensions are Ø 80 mm body diameter, 27 mm clamping bore and an overall length of 50 mm; these determine fitment and required clearance. Does the holder support quick insert changes for high-mix production? Yes. The standard Torx fastening and compatibility with common insert formats enable efficient insert changes, reducing tool-change time in mixed production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of a stable 80 mm body, integrated internal coolant and direct compatibility with LNMX 1510 indexable inserts for consistent shoulder and facing operations; order the component directly via Metav Werkzeuge or consult our specialists for application advice. Eckmesserkopf — 80 mm 90° indexable turning head with internal coolant by Teknik Makina The Eckmesserkopf is a compact 90° indexable turning head designed for external shoulder and facing operations using LNMX 1510 inserts, providing controlled chip flow and repeatable set-ups for workshop and production environments. 80 mm diameter body for stable machining Internal coolant for improved chip evacuation Designed for LNMX 1510 indexable inserts 90° cutting angle for shoulder and facing operations Stable design for predictable machining results The angular turning head features an 80 mm diameter body that increases rigidity during interrupted cuts and heavy cross-sections. This higher mass and contact area translate into reduced vibration and improved surface finish, meaning fewer rework cycles and more predictable cycle times. The component’s 50 mm overall length keeps overhang low, which further enhances stability in serial production and toolroom applications. Integrated coolant to extend tool life and improve quality The head is furnished with internal coolant, which directs cutting fluid close to the cutting edge to aid chip evacuation and temperature control. For many turning tasks this reduces thermal loading on the insert, preserving edge integrity and reducing flank wear. In practice, optimised coolant supply supports longer insert life and more consistent tolerances, particularly during prolonged runs or when machining difficult-to-cut materials. Fast servicing and secure clamping for efficient workflows Maintenance and insert changes are straightforward thanks to the Torx drive specification T15 and the supplied screw dimension M4x12.5, enabling secure clamping with standard workshop tools. The head accommodates LNMX 1510 indexable inserts from Korloy, allowing quick index changes without complex set-up procedures. This configuration reduces machine downtime and keeps spindle utilisation high in batch production. Focused application: shoulder turning, facing and light profiling Configured with a 90° cutting angle and multiple effective cutting positions, this turning head is particularly suited for shoulder turning, facing and light profiling work where repeatability and surface integrity are required. The combination of a compact body and coolant routing makes it an efficient choice for small- to medium-batch operations in general engineering and subcontract machining. Discuss integration options and matching inserts with Metav Werkzeuge — contact our specialists at Metav Werkzeuge to ensure optimal set-up and fast supply from Emmerich Technical data SKU: T376-1TM Product type: Eckmesserkopf Label: 80mm Eckmesserkopf LNMX 1510 L50mm mit Innenkühlung Manufacturer: Teknik Makina eClass: 21181015 Facts Diameter: 80 mm Overall length: 50 mm Weight: 1.087 kg Cutting angle: 90° Cutting positions: 7 Torx drive: T15 Torx screw: M4x12.5 Special features Internal coolant For LNMX 1510 indexable inserts Compatible insert manufacturer: Korloy Suitable for shoulder turning and facing FAQ Which inserts fit this turning head? The Eckmesserkopf is designed for LNMX 1510 indexable inserts and is compatible with Korloy LNMX 1510 grades for a range of materials. Does the head include internal coolant? Yes, the turning head features internal coolant to support chip evacuation and temperature control at the cutting edge. What is the overall length and diameter of the head? The tool head has an 80 mm diameter and an overall length of 50 mm, giving a compact, rigid set-up. Which Torx key and screw size are required for insert clamping? Insert clamping uses a T15 Torx drive with screw size M4x12.5 for secure fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine the advantages of internal coolant and an 80 mm head with proven compatibility for ADKT 1706 indexable inserts to secure consistent turning accuracy and longer insert life; order the corner tool head directly via Metav Werkzeuge or consult our specialists for application advice. Corner tool head T592TM — 80 mm, internal coolant (Teknik Makina) A corner tool head designed for turning operations using ADKT 1706 indexable inserts, offering internal coolant and a compact 50 mm overall length for stable shoulder machining. Internal coolant supply 80 mm head diameter 90° cutting angle Compatible with ADKT 1706 inserts Improved tool life and thermal control for high-volume turning The integrated internal coolant channel directs fluid close to the cutting edge, reducing thermal load and improving chip evacuation. This leads to noticeably longer insert life and fewer tool changes in continuous production. By combining a robust 80 mm head with controlled coolant delivery, the assembly enhances precision and repeatability on critical shoulder and profile cuts, lowering downtime and increasing throughput. Secure clamping and simple maintenance for production workflows Designed for ADKT 1706 indexable inserts from Korloy, the toolhead uses a secure clamping screw (M4x10) tightened with a T15 Torx key to ensure rigid fixation and accurate seating. The 90° cutting angle provides true square shoulders with minimal setup. Routine service is straightforward: replace worn inserts and check the coolant passage for debris, preserving consistent cutting conditions and predictable maintenance intervals. Compact dimensions with industrial stability and clear specifications With an overall length of 50 mm and a mass of 0.735 kg, the head balances compact installation with sufficient mass for vibration damping during interrupted cuts. The design provides seven cutting edges, allowing extended operation before reindexing, and is suitable where consistent surface quality and repeatable geometry are required. The assembly suits both small batch manufacture and continuous shop-floor applications that demand reliable, high-precision toolholding. Contact Metav Werkzeuge for tailored application advice or to reserve the Teknik Makina corner tool head T592TM and benefit from our reliable supply from Emmerich. Technical Data SKU: T592TM Product type: Corner tool head Suitable for: ADKT 1706 indexable inserts Compatible insert manufacturer: Korloy Internal coolant: Yes Facts Head diameter: 80 mm Overall length: 50 mm Weight: 0.735 kg Cutting edges: 7 Cutting angle: 90° Screw: M4x10 Torx key: T15 Special features Internal coolant channel Designed for ADKT 1706 inserts 90° corner machining capability Manufacturer: Teknik Makina Label: 80mm Eckmesserkopf ADKT 1706 L50mm mit Innenkühlung FAQ Is this tool head compatible with ADKT 1706 inserts from Korloy? Yes. The corner tool head T592TM is specified for ADKT 1706 indexable inserts and is compatible with inserts supplied by Korloy. How does the internal coolant improve performance? Direct coolant delivery to the cutting zone reduces heat and improves chip control, which extends the life of ADKT 1706 inserts when used with this corner tool head. What torque tool is required for the clamping screw? A T15 Torx key is required to tighten the M4x10 clamping screw supplied for this tool head. Can the tool head deliver consistent square shoulders? Yes. The 90° cutting angle and rigid clamping deliver repeatable square shoulder cuts suitable for precision turning operations. What are the main dimensions and mass for mounting considerations? The head measures 80 mm in diameter, has an overall length of 50 mm, and weighs 0.735 kg, offering a compact footprint with good damping for machining stability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the 80 mm diameter, internal coolant and compact 50 mm length to ensure stable turning and reliable chip control; order the angle tool head directly via Metav Werkzeuge or ask our consultants if needed. Angle tool head T556-1TM – 80 mm diameter with internal coolant, for APKT 1705 indexable inserts Angle tool head T556-1TM for APKT 1705 indexable inserts, designed for CNC turning operations where compact, coolant-fed tooling is required 80 mm diameter for stable cutting performance Internal coolant for improved chip evacuation Compatible with APKT 1705 inserts (Taegutec) 50 mm overall length for compact setup Consistent stability from a larger head diameter A larger tool head reduces deflection and improves surface finish during demanding turning tasks. The 80 mm diameter provides a solid support platform, which translates into repeatable dimensional accuracy and longer insert life. Combined with the 90° cutting angle, the design allows straightforward shoulder and face turning while maintaining rigidity. For workshops aiming to reduce rework and increase first-pass yield, the robust geometry of the head directly contributes to predictable cutting results. Controlled cooling and chip clearance for reliable cycle times Built-in internal coolant channels direct cutting fluid to the insert seat to cool the cutting edge and aid chip evacuation. This targeted fluid delivery reduces thermal load on the insert, stabilising tool life and helping to maintain cutting data for longer periods. The internal coolant capability therefore supports higher productivity and lower tooling change frequency, which is especially beneficial in serial production environments that demand consistent cycle times and minimal downtime. Precision fitment and practical assembly for efficient tool changes The head is prepared for APKT 1705 indexable inserts from Taegutec, giving access to widely available insert grades and geometries. Fast, secure clamping is achieved using M4x10 screws paired with a Torx T15 key, simplifying insert replacement and reducing maintenance intervals. The unit incorporates seven cutting edges, offering multiple repositions before a full insert replacement is required, which contributes to reduced tooling costs per part and improved process economy. Compact footprint for versatile machine integration With an overall length of 50 mm and a weight of roughly 1.047 kg, the design suits confined turrets and compact setups where space is at a premium. The combination of a compact profile and a robust 80 mm head delivers the balance between accessibility and stiffness needed in modern CNC turning centres. Where accessibility and process reliability are priorities, this head offers a practical route to improved machining consistency without extensive fixture changes. Contact Metav Werkzeuge to secure the Teknik Makina angle tool head T556-1TM with internal coolant and discuss the optimal insert grades for the application Technical data SKU: T556-1TM ECLASS: 21181015 Product type: Angle tool head Brand: Teknik Makina Diameter: 80 mm Overall length: 50 mm Weight: 1.047 kg Cutting angle: 90° Number of cutting edges: 7 Screw: M4x10 Torx key: T15 Internal coolant For APKT 1705 indexable inserts Compatible insert manufacturer: Taegutec Suitable for CNC turning applications FAQ What insert type does the head accept? The angle tool head accepts APKT 1705 indexable inserts; the geometry is prepared for standard APKT seats supplied by brands such as Taegutec. Is internal coolant available and how does it help? Yes, the tool head features internal coolant, which cools the cutting zone and assists chip evacuation to extend insert life and improve process reliability. Which screw and key are required for insert clamping? Insert clamping uses M4x10 screws and a Torx T15 key for secure and quick insert changes. Can this head be used in compact turrets? The compact 50 mm overall length and 80 mm head diameter make it suitable for confined turrets while maintaining rigidity for stable cuts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise 90° geometry, secure 27 mm shank mounting and quick Torx fastening for repeatable shoulder turning. The robust 80 mm head and compatibility with LNXT 1306 indexable inserts ensure reliable productivity in batch and workshop operations — order via Metav Werkzeuge or consult our technical advisors for application support. Corner toolholder T675TM — 90° angle head for LNXT 1306 indexable inserts (Teknik Makina) A compact angle toolholder T675TM designed for shoulder turning and finishing with LNXT 1306 indexable inserts, optimised for stable clamping and fast insert changes on conventional and CNC lathes 90° cutting angle for precise shoulder cuts Compatible with LNXT 1306 indexable inserts 27 mm shank diameter for secure mounting Supplied with M4x10 Torx screw, T15 80 mm head diameter and 7 cutting edges Consistent shoulder accuracy through defined 90° geometry The 90° cutting angle of this angle head delivers predictable shoulder faces and square corners on turned components. Designed for use with LNXT 1306 indexable inserts (Palbit compatible), the holder transmits cutting forces directly through a 27 mm shank, reducing vibration and improving surface finish. For workshops aiming to standardise processes, the defined geometry shortens setup times and reduces scrap by producing repeatable datum faces on every cycle. Fast, secure insert changes minimise downtime Tool change and clamping have been simplified: the head is secured with an M4x10 Torx screw and requires a T15 driver for reliable torque application and quick exchange. The moderate overall length and weight contribute to easy handling during tool changes while maintaining rigid support in the turret. These properties deliver a measurable reduction in machine downtime and support efficient workflow in production or jobbing environments. Built for everyday robustness and compatibility With an 80 mm head diameter and seven cutting surfaces, the design balances cutting stability with accessibility when indexing inserts. The holder accepts standard LNXT 1306 plates and is suitable for a wide range of turning tasks where a square shoulder or facing operation is required. Manufactured to industrial tolerances, this angle head supports consistent tool life and predictable performance across repeated operations. For application advice and to procure the T675TM angle toolholder from Teknik Cutting Tools, contact Metav Werkzeuge — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for tailored support and fast delivery Technical data SKU: T675TM Product: Corner toolholder Brand: Teknik Makina Facts Weight: 1.029 kg Shank diameter: 27 mm Cutting angle: 90° Head diameter: 80 mm Overall length: 50 mm Cutting edges: 7 Special features Compatible inserts: LNXT 1306 (Palbit) Torx screw: M4x10 Torx key size: T15 Suitable for shoulder turning and facing Manufacturer SKU available: T675TM FAQ What inserts fit this angle toolholder? The angle toolholder accepts LNXT 1306 indexable inserts; it is specified for Palbit-style LNXT 1306 plates and geometry. Is the holder suitable for CNC turret use? Yes. The 27 mm shank and compact profile of the T675TM provide stable clamping suitable for both CNC turret and conventional lathe turrets. Which screw and driver are required for insert clamping? Clamping is performed with an M4x10 Torx screw and a T15 driver for secure and repeatable fastening. How does the 90° geometry help production? The 90° orientation produces consistent shoulder faces and right-angle features, reducing setup time and ensuring repeatable part tolerances in batch production. What are the main dimensions to check for turret compatibility? Key dimensions are the 27 mm shank diameter, 50 mm overall length, and 80 mm head diameter; confirm turret clearance accordingly. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the precise 90° cutting angle and robust 32 mm shank for stable shoulder turning; the compact design and secure M8x24 locking screw ensure reliable insert clamping and consistent surface finish. Order the part directly via Metav Werkzeuge or consult the technical team for compatibility and delivery. Corner turning head T104TM – 90° tool holder for TPKN 1603–2204 indexable inserts, 32 mm shank The Corner turning head T104TM is a compact 90° tool holder engineered for turning and shoulder operations with TPKN 1603–2204 indexable inserts; designed for rigid mounting in small to medium turning setups Compact 90° cutting geometry Compatible with TPKN 2204 inserts 32 mm shank for rigid mounting Precise shoulder turning with 90° cutting geometry The head is engineered around a 90° cutting angle, providing a defined cutting line for shoulder and face turning. This geometry reduces setup complexity and delivers repeatable dimensions when machining shoulders. The tool accepts TPKN 2204 indexable inserts, enabling rapid replacement and predictable tool life. Since the insert form is industrially standard, tool changes are simple and downtimes are minimised, which supports higher machine utilisation and a reliable production rhythm. Rigid fixation and controlled vibrations for improved surface finish A 32 mm shank and a dedicated M8x24 locking screw ensure a rigid connection to the holder, which reduces vibration and improves surface integrity. The clamping arrangement is completed with an M4x10 socket screw and requires a 5 mm Allen key for adjustments. The mass of 0.81 kg contributes to damping during operation without compromising manoeuvrability. Together, these features lower the risk of chatter and support consistent tolerances on turned components. Space-saving dimensions for tight machining envelopes Compact overall dimensions mean the head fits where larger holders cannot: the tool has an 80 mm diameter and an overall length of 52 mm, allowing access to confined work areas and short overhangs. Reduced projection lowers bending moments and enables higher feed rates under stable conditions. In restricted setups, the small footprint simplifies toolpath planning and often permits additional operations without a tool change, enhancing workflow efficiency. Efficient insert handling and workshop compatibility Designed to work with industry-standard indexable inserts, the head makes insert swaps quick and precise. The use of TPKN 1603–2204 indexable inserts keeps tooling costs predictable and simplifies inventory management. The clamping plate reference TA012 is used for mounting, which standardises replacement parts across compatible holders. Together, these aspects help to reduce non-productive time and make the component suitable for routine production and repair work in metalworking shops. For technical specification, ordering or to discuss application suitability for Teknik Makina T104TM, contact Metav Werkzeuge for expert advice and prompt delivery from Emmerich – eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 Technical data Article number: T104TM Designation: Corner turning head Compatible inserts: for TPKN 1603–2204 indexable inserts Manufacturer: Teknik Makina Key measurements Shank diameter: 32 mm Diameter: 80 mm Overall length: 52 mm Weight: 0.81 kg Cutting angle: 90° Number of cutting edges: 4 Features Locking screw: M8x24 Socket screw: M4x10 Allen key size: 5 mm Clamping plate reference: TA012 FAQ Which inserts are compatible with this turning head? The T104TM is compatible with TPKN 1603–2204 indexable inserts; Teknik Makina’s design accepts the standard TPKN form for quick replacement. What is the shank diameter and why does it matter? The shank diameter is 32 mm, which provides a rigid connection and helps to reduce vibration during turning with the T104TM. Is this holder suitable for shoulder turning at 90°? Yes — the tool head is designed around a 90° cutting angle, making it suitable for precision shoulder turning applications with TPKN inserts. How are inserts and the head secured? Inserts are secured using the designated clamping arrangement; the head uses an M8x24 locking screw and an M4x10 socket screw, adjusted with a 5 mm Allen key for reliable clamping. What are the physical dimensions and mass of the head? The head measures 80 mm in diameter with an overall length of 52 mm and weighs 0.81 kg, offering a compact and stable solution for confined machining spaces. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of 90° cutting geometry, internal coolant and compact 80 mm diameter for improved turning accuracy and extended tool life; order the corner turning head directly via Metav Werkzeuge or ask our consultants if needed. Corner turning head – 80 mm diameter, internal coolant (Teknik Makina) Corner turning head for 3PKT 1505 indexable inserts, designed for precise 90° corner turning and coolant-assisted machining in lathe operations 80 mm head diameter for stable turning Internal coolant for improved tool life 90° cutting geometry for precise corner cuts Compatible with 3PKT 1505 Taegutec inserts Precision and rigidity for accurate corner turning The compact head combines a short overhang with a wide contact area to deliver high rigidity during machining. The 90° cutting geometry means corners are produced with predictable toolpaths, reducing setup iterations and rework. With an 80 mm diameter and reduced projection, this tool head minimises vibration and delivers consistent repeatability across batch runs, supporting reliable cycle times in medium-duty turning tasks. Coolant-fed design to extend insert life and improve machining consistency Integrated internal coolant channels supply fluid directly to the cutting zone, improving heat dissipation and swarf evacuation. This targeted coolant delivery promotes more stable cutting temperatures, which conserves coating properties and extends tool life. Better chip control also reduces the need for manual cleaning between operations, increasing uptime and lowering overall production costs through fewer unscheduled tool changes. Compatibility and secure mounting for efficient changeovers Engineered for use with 3PKT 1505 indexable inserts and optimised for Taegutec grades, the head accepts standard fastening hardware for straightforward assembly. The clamping screw specification (M4x10) and drive (T15) are industry-standard, enabling fast, reproducible insert changes and reducing fixture complexity. Standardised interfaces mean the head integrates smoothly into existing tooling pools and shortens operator training time. Practical advantages for workshop productivity With an overall length of L50 mm and a measured mass of 1.105 kg, the component balances compact size with sufficient mass to dampen cutting forces. The head is configured with seven cutting edges, allowing extended service intervals before replacement. Supplied by Teknik Makina, this head is suited to jobbing shops and production cells seeking a robust, coolant-capable solution that reduces inventory complexity while maintaining machining quality. For a reliable upgrade to coolant-fed corner turning, contact Metav Werkzeuge to discuss the Teknik Makina corner turning head and receive tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: T400-1TM Label: 80mm Corner turning head 3PKT 1505 L50mm with internal coolant ECLASS: 21181015 Facts Diameter: 80 mm Overall length: 50 mm Weight: 1.105 kg Cutting angle: 90° Cutting edges: 7 Screw: M4x10 Torx key: T15 Special features Internal coolant For 3PKT 1505 indexable inserts Compatible with Taegutec inserts Product type: Corner turning head Manufacturer: Teknik Makina FAQ What insert type fits this turning head? The head is designed for 3PKT 1505 indexable inserts and is compatible with Taegutec insert grades for optimal performance. Does the head supply coolant to the insert? Yes, the head features internal coolant channels that deliver cutting fluid directly to the cutting edge for improved tool life and chip control. Which fastening hardware is required for mounting inserts? The insert is secured with an M4x10 screw driven by a T15 Torx key, allowing standardised, repeatable clamping. Is this head suitable for high-speed turning? The combination of a short projection and solid 80 mm diameter provides rigidity suitable for medium to higher-speed turning, with coolant assistance helping to manage cutting temperatures. Who supplies this corner turning head and who is responsible for distribution? The head is supplied by Teknik Makina and distributed via Metav Werkzeuge for the European market Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the robust combination of 90° cutting geometry and stable mounting for repeatable shoulder turning; the clear compatibility with ADMT 1204 indexable inserts reduces set-up time and inventory complexity. Order or request technical advice via Metav Werkzeuge for reliable supply and application guidance. 90° Indexable Turning Head T219TM by Teknik Makina — Ø80 mm, shank Ø27 mm The turning head T219TM is a purpose-built 90° toolhead for turning operations using ADMT 1204 indexable inserts, engineered for precision shoulder cuts and compact toolstations. 90° cutting angle for accurate shoulder turning Ø80 mm head diameter for stable cutting Compatible with ADMT 1204 indexable inserts Ø27 mm shank mounting with Torx M3x7 fixing Stable 90° cutting for precise shoulder work The T219TM delivers a consistent 90° cutting angle, which is ideal for shoulder and face-turning tasks where accuracy and repeatability matter. The relatively large Ø80 mm head diameter provides mass and rigidity at the cutting zone, reducing chatter and improving surface finish on interrupted cuts. Operators benefit from a predictable cutting geometry: the right-angle orientation makes setting tool offsets straightforward on CNC lathes and reduces the need for complex fixture adjustments. Secure clamp and quick insert changes reduce downtime Insert retention is implemented with a Torx M3x7 fixing and is serviceable using a T8 key, enabling fast, repeatable clamp torque and eliminating ambiguous assembly steps. Because the head is configured for ADMT 1204 indexable inserts, spare parts and insert rotation procedures are standardised, which shortens maintenance intervals and lowers process variation. The straightforward clamping concept supports consistent seating of inserts, translating into more predictable tool life and fewer scrap parts. Compact mounting that fits common toolholders and machines The toolhead is supplied with a Ø27 mm mounting interface, suitable for many BMT and turret toolholders designed for intermediate shank diameters. With an overall length of 52 mm and a mass of 1.176 kg, the unit balances stiffness and compactness to keep overhang low while maintaining sufficient inertia for stable cutting. This balance helps maintain nominal cutting parameters and supports integration into existing tooling setups without major spindle or turret modifications. Workshop compatibility and application scope Designed for turning applications with ADMT 1204 inserts and proven compatibility with Walter-manufactured inserts, the head is suited to light-to-medium production turning jobs, particularly where shoulder definition and surface quality are priorities. The combination of standardised inserts and a robust head diameter makes the component appropriate for job-shop environments and production lines seeking repeatable results with minimal set-up complexity. The toolhead supports established workshop workflows and simplifies stockkeeping by using a widely recognised insert family. For ordering, technical evaluation or to discuss integration of Teknik Makina's 90° turning head into existing tooling setups, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 for fast, reliable support and delivery Technical data Article number: T219TM Manufacturer: Teknik Makina Product: 90° indexable turning head for ADMT 1204 inserts Core data Head diameter: 80 mm Shank mounting diameter: 27 mm Overall length: 52 mm Weight: 1.176 kg Cutting angle: 90° Cutting edges: 7 Features Compatible with ADMT 1204 indexable inserts Compatible with Walter inserts Fixing screw: Torx M3x7 Torx key: T8 Designed for shoulder turning and face operations FAQ What inserts fit this turning head? The turning head T219TM is designed for ADMT 1204 indexable inserts and is also compatible with inserts supplied by Walter, ensuring straightforward insert sourcing and interchangeability. What is the required mounting diameter for the toolholder? Mounting requires a tool shank or adapter with a Ø27 mm reception to ensure correct seating and clamping of the turning head T219TM. Which screw and key are used for insert clamping? Insert clamping uses a Torx M3x7 screw and a T8 Torx key for controlled torque and fast insert changes on the T219TM head. Is the head suitable for heavy roughing operations? The head's Ø80 mm diameter and 1.176 kg mass provide good rigidity for many production tasks, but suitability for heavy roughing depends on machine power, setup stiffness and the chosen insert grade. How does the 90° cutting angle aid in workshop processes? A 90° cutting angle simplifies offset programming and is particularly effective for precise shoulder finishes, reducing rework and set-up complexity when using the T219TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact, stable and built for repeatable turning: the corner tool head combines an 80 mm diameter, 90° cutting geometry and internal coolant to maintain cutting-edge life and process reliability; order directly via Metav Werkzeuge or consult our specialists for application checks. Corner tool head T356-1TM — 80 mm, internal coolant (Teknik Makina) The Corner tool head is a purpose-built indexable turning head for light to medium-duty turning operations, designed for ADMT 1606 indexable inserts and short overhang applications. 80 mm diameter for stable turning Internal coolant for extended insert life Compatible with ADMT 1606 indexable inserts Fastening with T15 torx, M4x10 screw Consistent cutting performance through compact rigidity The turning head delivers repeatable results by combining a compact 80 mm diameter body with a short overall length of 52 mm, which reduces overhang and increases stiffness during cutting. The integrated 90° geometry and the provision for seven cutting positions allow efficient cornering operations and accurate profile control. As a result, cycle times remain predictable and tool life improves, while spindle and machine loads stay within expected limits. Operators and production planners benefit from clear machining parameters when using ADMT 1606 indexable inserts in a rigid holder suited to short-reach turning. Internal coolant and secure clamping reduce downtime Equipped with internal coolant, the head channels lubricant directly to the insert seat, improving heat control at the cutting edge and assisting chip evacuation in interrupted cuts. The assembly uses a T15 Torx drive and M4x10 fastening screw for reliable clamping and straightforward maintenance. These features simplify insert changes and minimise setup time, translating into fewer interruptions on the shop floor. Compatibility with Walter-manufactured inserts ensures access to widely available cutting grades, helping maintenance teams plan consumable stock and reduce lead times for replacements. Supply reliability and workshop-level precision Sourced from Teknik Makina and distributed via Metav Werkzeuge, the component combines manufacturer-grade production with a European quality filter in Emmerich. The compact design and cooled cutting interface suit jobbing shops and production cells seeking a durable, space-saving solution for groove and corner turning tasks. Metav’s supply chain experience and broad portfolio support integration into existing tooling families, while technical data and compatibility notes help purchasing and engineering colleagues make informed decisions. Contact Metav Werkzeuge for a tailored compatibility check or a supply proposal — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the T356-1TM corner tool head and suitable ADMT 1606 inserts. Technical data SKU: T356-1TM Manufacturer: Teknik Makina eClass: 21181015 Label: 80mm Eckmesserkopf ADMT 1606 L52mm mit Innenkühlung Core dimensions Diameter: 80 mm Overall length: 52 mm Weight: 1.254 kg Number of cutting positions: 7 Cutting angle: 90° Special features Internal coolant For ADMT 1606 indexable inserts Compatible insert manufacturer: Walter Torx key: T15 Torx screw: M4x10 Product type: Corner tool head FAQ Is this head compatible with ADMT 1606 inserts from other suppliers? Compatibility is specified for ADMT 1606 indexable inserts; the T356-1TM head accepts inserts of that geometry and is often compatible with equivalent offerings from major manufacturers such as Walter. Does the tool head have through-tool coolant? The T356-1TM corner tool head features internal coolant, which delivers coolant to the insert seat to improve heat management and chip control during cutting. What fastening hardware is required for insert clamping? Clamping is performed with a Torx T15 drive and an M4x10 screw, providing secure and serviceable insert fixation. What are the key dimensions to consider for setup? Key dimensions are a diameter of 80 mm and an overall length of 52 mm; the compact form reduces overhang and increases rigidity for turning operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of 90° cutting geometry and secure Torx clamping for repeatable shoulder turning with ANHX 1206 indexable inserts. Order the corner turning head via Metav Werkzeuge or consult their specialists for application matching and integration into existing toolholders. Corner turning head — for ANHX 1206 indexable inserts, 90° cutting angle (Teknik Makina) A corner turning head engineered for precise shoulder turning and facing operations using ANHX 1206 indexable inserts, offering a compact profile for versatile lathe and CNC toolholder setups. 90° cutting geometry for square shoulders Accepts ANHX 1206 indexable inserts 27 mm holder interface diameter Torx M3.5×8.5 retention with T15 key Consistent square shoulders through defined geometry The compact design delivers a 90° cutting geometry that is optimised for producing square shoulders and clean faces with minimal secondary machining. The use of ANHX 1206 indexable inserts means insert changes are fast and reproducible, reducing setup time and keeping cycle times predictable. Compatibility with Palbit-manufactured inserts guarantees a wide choice of grades and geometries for different materials. For users unfamiliar with insert nomenclature: ANHX 1206 denotes the insert shape and size standard for this series, enabling straightforward selection of cutter grades for finishing, semi-finishing or general turning. Secure clamping and interface for reduced vibration A dedicated 27 mm interface provides a rigid connection to compatible toolholders, helping to reduce runout and vibration in typical turning operations. Insert retention is achieved via a Torx M3.5×8.5 screw operated with a T15 key, which gives high repeatability at each re-index and lowers the risk of loosening under intermittent loads. The head’s measured proportions — a head diameter of 80 mm and a total length of 50 mm — suit confined setups where tool overhang must be controlled. These mechanical details translate into more consistent surface finish and tool life when paired with appropriate cutting data. Where this head adds most value in the workshop The turning head is intended for precise external turning, shoulder creation and facing in batch production or small-series work where setup consistency is important. By using indexable inserts, the process becomes more economical: only the insert needs replacing when worn, rather than the whole cutter, which supports efficient operation across multiple shifts. The head’s compatibility with Palbit inserts and the standardised Torx clamping system make it straightforward to integrate into established tooling systems. If geometry or grade selection is uncertain, technical consultation is recommended to match insert grade and cutting parameters to the material and machining objectives. For specification matching or to secure the Teknik Makina corner turning head T644TM for a workshop setup, contact Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: T644TM Product: Corner turning head Application: for ANHX 1206 indexable inserts Manufacturer: Teknik Makina Torx screw: M3,5x8,5 Torx key: T15 Compatible insert maker: Palbit Numbers / Core technical data Holder interface diameter: 27 mm Head diameter: 80 mm Total length: 50 mm Cutting angle: 90° Cutting edges: 8 Weight: 1.209 kg Special features For ANHX 1206 indexable inserts Palbit-compatible Torx clamping M3.5×8.5 (T15) SKU T644TM FAQ Which inserts fit this turning head? The head accepts ANHX 1206 indexable inserts; compatible inserts from Palbit are supported and recommended for straightforward integration. What is the benefit of the 90° cutting angle? A 90° cutting angle enables true square shoulders and reliable facing; the geometry minimises the need for secondary finishing when used with the correct insert grade. What is the mounting interface size? The turning head uses a 27 mm holder interface diameter, providing a rigid connection that helps reduce runout during turning cycles. How are inserts secured in the head? Inserts are retained with a Torx M3.5×8.5 screw tightened with a T15 key, offering repeatable clamping and easy re-indexing. Is this head suitable for heavy-duty roughing? The head is optimised for precise shoulder turning and general external turning; suitability for heavy-duty roughing depends on machine rigidity, cutting data and insert grade selection, which should be verified prior to heavy-duty use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precise fitment and straightforward maintenance for dependable toolholding in production environments; the compact design and compatibility with APKT 1604 inserts ensure efficient index life and reduced changeover time — order or consult through Metav Werkzeuge for reliable supply and technical advice. Corner tool head T769TM — Indexable insert head by Teknik Makina, 80 mm diameter Corner tool head (Eckmesserkopf) T769TM for secure mounting of APKT 1604 indexable inserts in milling and lathe toolholders, designed for stable, repeatable operations 80 mm diameter for stable cutting Compatible with APKT 1604 inserts (YG-1) 27 mm shank diameter for secure mounting M4x10 Torx screw specification, T15 key Improved process stability with a compact cutting head The compact corner tool head is engineered to deliver consistent clamping and low run-out where precise orientation matters. With an 80 mm diameter and a 27 mm mounting bore, the component provides a firm interface to the toolholder that reduces vibration and enhances surface finish. The presence of six index positions extends the effective service life of the cutting system, allowing multiple reindexes before replacement is required. These design choices lower scrap rates and support predictable cycle times on medium- to high-volume batches. Faster set-up and simple mechanical retention A focus on practical workshop routines is reflected in the straightforward fixation method: retention via an M4x10 Torx screw with matching T15 key specification simplifies replacement and routine checks without specialised tools. The nominal overall length of 52 mm keeps the assembly compact, aiding access in tight fixtures and reducing interference in multi-axis arrangements. Features such as a standardised shank diameter and clear insert compatibility reduce the number of bespoke components held in stock, speeding up maintenance and contributing to leaner inventory management. Compatibility and serviceability for mixed-shop environments Designed to accept APKT 1604 indexable inserts and validated for use with inserts from YG-1, this head suits shops that combine turning and milling operations or that standardise on common ISO insert types. With a weight of 1.125 kg, the unit balances rigidity and handling convenience during tool changes. The clear technical specifications enable planners to verify fitment quickly and to incorporate the head into existing workflows with minimal trial-and-error. The result is a dependable toolholding option that supports sustained throughput while preserving component tolerances. For procurement or detailed machining advice on the Teknik Makina corner tool head T769TM, contact Metav Werkzeuge in Emmerich for expert assistance, transparent supply and fast delivery — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: T769TM Manufacturer: Teknik Makina Designation: Corner tool head for APKT 1604 indexable inserts Compatible insert standard: APKT 1604 (YG-1) Torx screw specification: M4x10, key T15 Dimensions & core figures Diameter: 80 mm Shank / mounting bore: 27 mm Overall length: 52 mm Cutting edges / index positions: 6 Weight: 1.125 kg Features & compatibility Compatible with APKT 1604 indexable inserts Compatible insert supplier: YG-1 Fastening: Torx M4x10 (T15) Suitable for standard toolholders with 27 mm mounting FAQ Which insert format fits this head? The head accepts APKT 1604 indexable inserts and is specified for inserts compatible with YG‑1. How is the head secured to the toolholder? Retention is achieved using an M4x10 Torx screw, operable with a T15 key, providing straightforward fixation. How many index positions does the head provide? The component features six cutting edges / index positions, enabling multiple reindexes before replacement. What are the key mounting dimensions to check? Verify a 27 mm mounting bore/shank and clearance for an 80 mm head diameter and 52 mm overall length. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from stable 90° geometry and simple Torx clamping for fast indexable insert changes; the head’s Ø80 mm size and 27 mm mounting give predictable positioning for repeatable results. Order directly via Metav Werkzeuge or consult our specialists for matching inserts and delivery options. Teknik Makina Corner Tool Head — 90° for APKT 1604 Indexable Inserts, Ø80 mm The Corner Tool Head is a 90° turning head designed for use with APKT 1604 indexable inserts, offering a compact footprint for shoulder turning and profiling in general workshop and light industrial turning applications 90° cutting geometry for square operations Compatible with APKT 1604 indexable inserts Ø80 mm head with 27 mm mounting diameter Secured by M4x10 Torx screw (T15) Consistent 90° geometry for repeatable shoulders The 90° cutting angle delivers a predictable tool path for shoulder and face turning where perpendicular faces are required. Manufactured to provide stable seating and repeatable insert location, the head minimises setup variance and reduces rework. The Ø80 mm head diameter combines rigidity with good access to workpieces, while the proven clamping method ensures that insert position does not shift under typical cutting forces. Such mechanical consistency supports process stability on short production runs and prototype work alike. Fast insert changes and workshop practicality Designed for quick maintenance, this tool head accepts APKT 1604 indexable inserts and is secured with an M4x10 Torx screw operated with a T15 key. The straightforward fastening system shortens downtime for insert changes and tool rotation, which in turn improves machine uptime. A 27 mm mounting diameter gives a clear mechanical interface to compatible holders and reduces the need for adapters. Compatibility with Korloy inserts is indicated, allowing selection from a wide market of cutting grades and geometries for different materials and cutting conditions. Reliability and productivity in everyday turning By combining a compact overall length (52 mm) with a robust fixing concept and multiple cutting edges, the head supports productive workshop routines. The inclusion of seven usable cutting edges increases the effective lifetime of the consumable before replacement is required, yielding cost-efficient tool use in intermittent turning tasks. The head’s mass (approx. 1.249 kg) contributes to dampening of vibration when mounted correctly, which helps to maintain surface finish and dimensional repeatability. Where reliable shoulder control and fast tool servicing are priorities, this solution provides a practical balance of durability and accessibility. For procurement or technical advice on this 90° Corner Tool Head from Teknik Makina, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability, available inserts and delivery lead times Technical Data Article number: T187TM Manufacturer: Teknik Makina Product name: Corner Tool Head for APKT 1604 indexable inserts Brand SKU: T187TM Facts Head diameter: 80 mm Overall length: 52 mm Mounting diameter: 27 mm Cutting angle: 90° Cutting edges: 7 Weight: 1.249 kg Special features Compatible inserts: APKT 1604 Compatible insert brand: Korloy Fastening: M4x10 Torx screw Torx key size: T15 FAQ What insert type fits this tool head? The head is designed for APKT 1604 indexable inserts; Korloy grades are indicated as compatible for a range of materials. Which fastening hardware is supplied for the insert? Fixing is by an M4x10 Torx screw, tightened with a T15 key for secure clamping of the insert. What is the required mounting diameter for the holder? The tool head uses a 27 mm mounting diameter for direct attachment to compatible holders. How does the head support workshop efficiency? The combination of quick Torx clamping and multiple cutting edges reduces downtime and extends consumable life, helping to keep machines productive. Is this head suitable for shoulder and profiling operations? Yes, the 90° geometry is specifically intended to produce square shoulders and accurate profiles in general turning tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precise, compact turning solution that combines compatibility with APKT 1705 indexable inserts and a rigid 90° cutting geometry to streamline shoulder and profile machining. Benefit from the robust 80 mm body and 27 mm shank for stable setup, and consult Metav Werkzeuge for application support or procurement. 90° Corner Turning Head – indexable insert holder for APKT 1705 by Teknik Makina The 90° Corner Turning Head is an indexable insert holder engineered for external shoulder turning and profiling with APKT 1705 inserts, delivering repeatable geometry and straightforward insert changes. For APKT 1705 indexable inserts 90° cutting angle for shoulder operations 80 mm body diameter, 27 mm shank Torx M4x10 screw; key T15 specified Reduced setup time through standardised insert compatibility The holder accepts APKT 1705 indexable inserts, a widespread form factor that simplifies tooling management in mixed fleets. Using a standard insert size reduces the need for multiple tool families, cutting inventory complexity and changeover time. The adapter design supports positive seating and controlled clamping via the specified M4x10 Torx screw, ensuring stable engagement of the cutting edge and consistent part geometry across batches. Stable cutting performance for shoulder and profiling cuts A true 90° turning geometry provides a defined contact angle for shoulder work and accurate shoulders without additional operations. The 90° cutting angle combined with the substantial 80 mm body diameter yields improved rigidity and vibration damping, which in turn extends insert life and promotes a consistent surface finish. The holder’s 27 mm shank is optimised for common turret and boring bar mounts, enabling a secure fit that maintains cutting parameters under medium to heavy interrupted cuts. Practical design that supports workshop efficiency Assembly and maintenance are simplified thanks to the clear fastening specification: Torx M4x10 screw and T15 key. This specification streamlines service routines and reduces toolroom guessing when replacing inserts or performing adjustments. Compatibility with Taegutec inserts is indicated, widening the choice of grades for different materials and allowing selection of coatings and substrates that best match specific component alloys or cycle-time objectives. Why this head benefits process reliability and planning Integrating a standard indexable holder reduces process variance and shortens setup planning. The compact overall length and balanced mass lead to predictable overhang and deflection data for CAM programming and machine setup. When paired with the right insert grade, this holder supports a cost-efficient combination of productivity and reproducible quality, valuable for both single-shift workshops and serial production lines that require consistent results. Contact Metav Werkzeuge for tailored application advice and reliable supply from Emmerich — please quote SKU T556TM for a precise recommendation Technical data Article number: T556TM Manufacturer: Teknik Makina Product: 90° corner turning head Dimensions & measurable data Diameter: 80 mm Overall length: 50 mm Shank diameter (mount): 27 mm Weight: 1.047 kg Cutting angle: 90° Number of cutting edges: 7 Features & compatibility Compatible with APKT 1705 indexable inserts Compatible insert manufacturer: Taegutec Torx screw: M4x10 Torx key: T15 SKU: T556TM FAQ Which inserts fit this turning head? The holder is designed for APKT 1705 indexable inserts; the geometry and clamping method match that insert form. Is the turning head compatible with Taegutec inserts? Yes, compatibility with Taegutec APKT 1705 inserts is specified for this turning head. What is the required fastening hardware? The clamping is specified with a Torx M4x10 screw and a T15 key for secure insert retention. Can this head be used for heavy interrupted cuts? The 80 mm body diameter and 27 mm shank improve rigidity for demanding turning tasks; suitability depends on machine setup and selected insert grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust mounting, internal coolant and compatibility with BOMT 1304 indexable inserts to improve cycle times and reduce tool-change frequency; order directly via Metav Werkzeuge or consult the team for specification advice. Corner turning head T969TM – 80 mm diameter, internal coolant (Teknik Makina) Corner turning head T969TM for BOMT 1304 indexable inserts, designed for precision turning operations where stable clamping and coolant-through performance increase productivity 80 mm diameter for stable tool engagement Internal coolant for improved chip control Compatible with BOMT 1304 indexable inserts Six cutting edges and 90° cutting angle Greater throughput from a compact 80 mm design The 80 mm diameter body provides a rigid interface between machine turret and cutting edge, which reduces vibration and delivers consistent surface finish across serial production. Fitted for BOMT 1304 indexable inserts, the holder’s layout with six cutting edges permits efficient indexing and lowers downtime for insert replacements. The result is measurable cycle-time improvement and fewer interruptions to production, which supports lean machining strategies in small-batch and series manufacturing alike. Coolant-through architecture that protects inserts and workpieces A coolant-through channel is integrated to supply lubricant directly to the cutting zone. This internal coolant feature cools the cutting edge, aids chip evacuation and helps prevent workpiece heat distortion during prolonged cuts. For operations that demand repeatable surface quality, coolant-through holders reduce flank wear and extend tool life, translating into fewer insert changes and lower consumable costs over time. Precision fit and industry-standard fastening for straightforward integration Compatibility with common insert systems and tooling standards simplifies setup. The turning head accepts Ingersoll compatible BOMT 1304 inserts and is secured with T10 Torx screws (M3.5x8.5), making replacement and reassembly fast and reliable. The 90° cutting angle provides a true shoulder-cut geometry for square shoulders and profiling tasks, ensuring predictable cutting forces and repeatable part geometry in turning centres and CNC lathes. Workshop-ready construction for reliable daily use With an overall length of 50 mm and a mass of 1.052 kg, the holder balances compact footprint with sufficient mass to dampen chatter in demanding cuts. The unit’s compact dimensions ease tool changer programming and storage while the robust construction supports continuous shifts. Supplied under SKU T969TM, this insert holder suits production environments that prioritise uptime and straightforward maintenance routines. For coolant-through turning solutions from Teknik Makina and tailored application support, contact Metav Werkzeuge for a technical consultation or to reserve the T969TM corner turning head compatible with BOMT 1304 inserts. Technical data SKU: T969TM Manufacturer: Teknik Makina Product type: Corner turning head Label: 80mm Eckmesserkopf BOMT 1304 L50mm mit Innenkühlung eClass: 21181015 Core data Diameter: 80 mm Shank interface diameter: 27 mm Overall length: 50 mm Weight: 1.052 kg Number of cutting edges: 6 Cutting angle: 90° Aufnahme_mm_d: 27 Special features Internal coolant: yes Fits indexable inserts: BOMT 1304 Compatible insert manufacturer: Ingersoll Torx key: T10 Torx screw: M3.5x8.5 Product SKU: T969TM FAQ What inserts fit this turning head? The turning head accepts BOMT 1304 indexable inserts and is compatible with Ingersoll-style inserts specified for that pocket. Does the holder provide coolant to the cutting edge? Yes, the unit features internal coolant that delivers fluid directly to the cutting zone to improve chip control and reduce insert wear. Which fastening is used to secure the inserts? Inserts are fastened with T10 Torx screws, specification M3.5x8.5, ensuring secure clamping and quick reassembly. What is the body diameter and why does it matter? The 80 mm body diameter increases rigidity at the tool interface, reducing vibration and helping to achieve consistent surface finishes in series production. Can this turning head be used for shoulder and profiling cuts? Yes—the 90° cutting angle and stable holder geometry make it suitable for square shoulders and profiling where accurate 90° faces are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a combination of precise 90° cutting geometry, rigid 27 mm mounting and broad compatibility with LNMT 0804 indexable inserts for reliable turning performance. Order the tool directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. Corner tool head T225TM – 90° angle tool head for LNMT 0804 indexable inserts (Teknik Makina) The Corner tool head T225TM is a compact 90° turning head designed for stable profiling and facing operations with LNMT 0804 indexable inserts in industrial CNC turning applications 90° cutting geometry for reliable profiling Compatible with LNMT 0804 indexable inserts 27 mm mounting shank for rigid clamping Torx M2.5 clamping; T8 key required Consistent component quality through defined 90° geometry The T225TM angle toolholder provides a 90° cutting angle that ensures predictable chip flow and consistent surface profiles on turned parts. Fitted to accept LNMT 0804 indexable inserts, the head supports rapid insert changes and repeatable seating accuracy, which reduces setup variation in series production. Indexable inserts are replaceable carbide plates that restore cutting performance without the need to regrind the holder; this results in stable cycle times and fewer reworks. The compatibility with ISCAR inserts adds flexibility when matching grade and geometry to the workpiece material. Faster changeovers and reduced tooling inventory With a 27 mm mounting shank, the unit is compatible with standard tool posts and offers a secure interface for heavy cuts. The Torx clamping arrangement (Torx screw M2.5x7) allows quick insert retention with a T8 key, shortening maintenance intervals and minimising machine downtime. Fewer specialised holders are required when a single head accepts a common insert size, so overall tooling stock is simplified. The practical result for production planning is improved throughput and lower logistical overhead. Stability engineered for minimal chatter and accurate finishes A compact form factor — 80 mm diameter with a 50 mm overall length — contributes to a low overhang and high rigidity; the measured mass (approximately 1.145 kg) further dampens vibration during machining. These physical characteristics help maintain dimensional accuracy and surface quality when performing facing or profiling operations. The specification lists 10 cutting edges, allowing predictable index changes and uninterrupted production runs. The combination of short projection and mass reduces the risk of chatter, preserving both tool life and workpiece finish. Supply reliability and partner advantages for production teams Sourcing the T225TM through Metav brings practical benefits beyond the component itself. Metav operates a quality‑filtered European distribution hub in Emmerich, offering a broad assortment for workshops and industry together with dependable logistics. The partnership translates into consistent availability, traceable sourcing, and a single point of contact for related tooling. For procurement and production managers, this means fewer supply interruptions and streamlined vendor management while retaining access to technical advice and matching accessories. Contact Metav Werkzeuge for a tailored tooling recommendation and availability check — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T225TM Name: Eckmesserkopf Brand: Teknik Makina Facts Diameter: 80 mm Overall length: 50 mm Mounting shank: 27 mm Weight: 1.145 kg Cutting angle: 90° Cutting edges: 10 Special features For LNMT 0804 indexable inserts Compatible with ISCAR inserts Torx clamping screw M2.5x7 Torx key size T8 FAQ Which inserts fit this toolhead? The T225TM corner tool head is designed for LNMT 0804 indexable inserts, enabling quick replacement and standardised machining performance. Is the head compatible with ISCAR inserts? Yes, the toolhead supports inserts from ISCAR, giving flexibility to choose grades and geometries from that supplier. What is the mounting shank diameter? The holder uses a 27 mm mounting shank for rigid clamping in standard tool posts. Which Torx size secures the insert? The clamp uses a Torx screw M2.5x7 and requires a T8 key for insert fastening. What are the key dimensions that affect rigidity? Critical dimensions are the 80 mm diameter and 50 mm overall length; the combination of these with the 1.145 kg mass provides the stability needed for accurate turning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, coolant-capable angle tool head that is compatible with LNMX 1006 indexable inserts and designed to improve process stability and reduce downtime; order directly via Metav Werkzeuge or consult the Metav team for application advice. Eckmesserkopf T389-1TM – Angle tool head with internal coolant, 80 mm The Eckmesserkopf is an angle tool head engineered for use with LNMX 1006 indexable inserts, offering a compact 50 mm overall length for tight setups in turning and finishing operations. 80 mm diameter for stable cutting Internal coolant for improved chip evacuation Compatible with LNMX 1006 indexable inserts Robust design by Teknik Makina, SKU T389-1TM Improved process stability through compact design The combination of a wide 80 mm diameter and a short 50 mm overall length delivers a stable cutting platform that reduces vibration and supports consistent surface finish. A compact head profile is particularly advantageous in constrained toolposts or multi-tasking lathes where axial and radial clearance are limited. The reduced deflection achieved by the robust geometry contributes directly to longer insert life and fewer tool offsets during production, which in turn supports predictable cycle times and lower scrap rates. Enhanced cooling and chip control for extended tool life Equipped with internal coolant, the head channels cutting fluid close to the cutting edge to improve lubrication and temperature control at the cutting zone. This reduces thermal shock and wear on the insert, enabling more consistent cutting performance over extended runs. The unit features 7 cutting edges, which, when paired with suitable LNMX 1006 inserts, allows for effective material removal while maintaining control over chip formation and evacuation — a clear efficiency gain in medium- to high-volume turning operations. Straightforward mounting and serviceability The head is supplied to mate with a mounting bore of Ø27 mm, simplifying installation into compatible toolholders. Fastening is executed using a T8 Torx key and M3x7 Torx screw for secure clamping of the insert seat and easy replacement during maintenance. The measured mass of 0.731 kg strikes a balance between rigidity and manageable handling for setup personnel. Clear, standardised fastening reduces downtime during insert changes and supports predictable maintenance intervals in production schedules. Versatile compatibility for demanding workshop tasks Designed for use with LNMX 1006 indexable inserts from Korloy, the head is suitable for a range of turning and finishing applications across steel and alloy components where a precise square or angled approach is required. Manufactured by Teknik Makina, the component complements modern CNC turning centres and manual lathes alike, providing a reliable option for workshops seeking to consolidate tooling with robust, coolant-fed solutions. The compact dimensions and compatibility reduce the need for multiple specialised holders, supporting a leaner tooling inventory and faster job changeovers. Discuss application suitability with Metav Werkzeuge’s specialists — mention the Teknik Makina T389-1TM angle head and internal coolant option when enquiring to ensure optimal integration into the machining process. Technical data SKU: T389-1TM Product type: Angle tool head Manufacturer: Teknik Makina EClass: 21181015 Core data Diameter: 80 mm Overall length: 50 mm Mounting bore: Ø27 mm Weight: 0.731 kg Cutting edges: 7 Cutting angle: 90° Torx key: T8 Torx screw: M3x7 Special features Internal coolant Compatible with LNMX 1006 indexable inserts Insert manufacturer compatibility: Korloy Category: Eckmesserkopf (angle tool head) FAQ Is this head compatible with LNMX 1006 inserts from Korloy? Yes. The T389-1TM angle tool head is designed for use with LNMX 1006 indexable inserts and is specified to work with Korloy-manufactured inserts. How does the internal coolant affect performance? The internal coolant supply reduces cutting temperatures and improves chip evacuation at the cutting edge, which typically extends insert life and enhances surface finish in continuous operations. What mounting size is required for installation? The head mounts into a holder with a Ø27 mm bore and is secured using the provided M3x7 Torx screw tightened with a T8 key. Can this head be used for finishing as well as roughing? Yes. The combination of a rigid 80 mm diameter body and internal coolant makes the head suitable for both finishing passes and moderate roughing, depending on insert grade and cutting parameters. Who supplies this angle tool head and what is the SKU for ordering? The tool head is produced by Teknik Makina and is listed as SKU T389-1TM for procurement and reference. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust stability and reliable cooling: the combination of an 80 mm body, a 90° cutting angle and integrated internal coolant ensures consistent surface quality and longer insert life in repetitive turning operations. Order this cutting solution directly via Metav Werkzeuge or consult our specialists for application advice. Angle tool head T411-1TM – 80 mm, internal coolant (for R390 17 indexable inserts) by Teknik Makina An Angle tool head engineered for precision turning with R390 17 indexable inserts, designed to deliver stable shoulder cuts and enhanced chip evacuation in workshop and light production environments. 80 mm diameter body for stable machining Integrated internal coolant for improved chip control 90° cutting angle for precise shoulder cuts Compatible with Sandvik R390 17 indexable inserts Consistent dimensional accuracy for repetitive machining The T411-1TM angle head is built to maintain positional stability during repetitive cycles. Its 80 mm diameter mass dampens vibration, which translates into improved surface finish and reduced tool chatter. The defined 90° cutting angle ensures accurate shoulder formation and predictable cutting geometry, reducing setup times and minimising rework. These properties support higher first-pass yields and smoother downstream processes. Controlled cooling and extended insert lifetime Equipped with internal coolant, the tool head channels cutting fluid directly to the cutting edge for efficient heat dissipation and targeted lubrication. This focused coolant delivery reduces thermal load on the insert and workpiece, slowing wear and helping to preserve cutting-edge geometry. Compatibility with Sandvik R390 17 indexable inserts allows the use of widely available grades for varied materials, improving uptime and simplifying inventory management. Serviceable design and workshop compatibility Maintenance requires only common workshop tools: Torx key T15 and Torx screw M3.5 x 8.5 simplify insert changes and reassembly. The compact overall length of 52 mm supports installations in limited overhang setups while the modest mass (approx. 1.168 kg) balances rigidity with handling ease during tool changes. For businesses aiming to reduce supplier complexity, this tool head integrates seamlessly with standard turning stations and existing insert stocks, supporting efficient shop-floor logistics. For dependable high-precision turning, choose the Teknik Makina T411-1TM angle tool head and secure supply and expert advice through Metav Werkzeuge — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations and stocking options. Technical data SKU: T411-1TM Label: 80 mm angle tool head R390 17 L52 mm with internal coolant E-class: 21181015 Product type: Angle tool head Brand: Teknik Makina Facts Diameter: 80 mm Overall length: 52 mm Weight: 1.168 kg Cutting edges / positions: 7 Cutting angle: 90° Torx key: T15 Torx screw: M3.5 x 8.5 Designs / Special features Internal coolant present For R390 17 indexable inserts Compatible with Sandvik inserts SKU T411-1TM FAQ Which inserts fit this angle head? The angle tool head accepts R390 17 indexable inserts; compatibility with Sandvik grades allows selection of appropriate chipbreaker and grade for the application. Is coolant supplied to the cutting edge? Yes — the tool head features internal coolant that delivers fluid directly to the cutting zone to reduce heat and improve insert life. What is the cutting angle and how does it affect machining? The 90° cutting angle provides precise shoulder formation and predictable cutting geometry, which is beneficial for accurate step and face turning operations. Which fasteners are used for insert retention? Insert clamping and service use a Torx T15 and M3.5 x 8.5 Torx screws for reliable, repeatable assembly. Can this head be used in tight overhang conditions? The compact overall length of 52 mm and a balanced mass of approximately 1.168 kg make this head suitable for constrained setups where rigidity and clearance are both required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, robust turning solution that combines 80 mm diameter stability, internal coolant and proven compatibility with R390 18 indexable inserts for reliable square-shoulder machining; order the component directly via Metav Werkzeuge or consult our specialists for integration advice. Angle Tool Head for R390 18 Indexable Inserts — 80 mm, Internal Coolant (Teknik Makina) The Angle Tool Head is a compact turning head engineered for square-shoulder and face-turning operations with R390 18 indexable inserts, offering a short overall length and integrated coolant supply for controlled machining. 80 mm diameter for stable machining Internal coolant for improved chip control Compatible with R390 18 Sandvik inserts 90° cutting angle for square-shoulder work Increased rigidity for consistent shoulder quality A substantial 80 mm diameter body combined with a 52 mm overall length reduces overhang and vibration during heavy shoulder cuts, delivering consistent surface finish and repeatable geometry. The component’s mass (approx. 1.081 kg) and compact design support higher process stability, which translates into fewer rejects and less rework. By reducing chatter and deflection, cycle times become more predictable and tool life for the indexable inserts is preserved, making the head suitable for demanding batch production environments. Targeted cooling to protect inserts and process reliability The integrated internal coolant directs lubricant and coolant precisely to the cutting zone, improving heat dissipation and chip evacuation. For indexable systems this means extended flank and crater life on the insert, reduced thermal deformation and more reliable tool performance over longer cycles. Explaining the term: internal coolant supplies fluid through the tool body to the insert seat, unlike external flushing which can miss the contact zone; this focused supply often enables higher stable cutting parameters and cleaner chips at the point of contact. System compatibility and quick maintenance Designed for the R390 18 insert format and specified to accept Sandvik supplier inserts, the head simplifies tooling inventory where common insert standards are used. Fast insert changes are supported by the supplied screw specification (M4x10) and the required Torx T15 key interface, enabling rapid service intervals and minimal downtime. The head accommodates six cutting edges in its system architecture and a 90° cutting angle, which is particularly effective for square shoulders and external chamfering tasks. Workshop integration and production benefits Manufactured by Teknik Makina, this turning head is intended for easy integration into existing turret and toolpost arrangements, providing a compact footprint and industry-standard interfaces. The combination of a short overall length and targeted coolant reduces the need for elaborate fixture changes while improving process repeatability. For procurement and operations managers the head represents a pragmatic choice where predictable performance, reduced cycle variability and simplified maintenance routines are priorities. Contact Metav Werkzeuge today to discuss integration of the Teknik Makina angle tool head with internal coolant for optimised shoulder machining — Metav Werkzeuge in Emmerich provides expert advice and supply coordination for seamless deployment. Technical Data Article number: T426-1TM Manufacturer: Teknik Makina ECLASS: 21181015 Product type: Angle tool head Facts Diameter: 80 mm Overall length: 52 mm Weight: 1.081 kg Number of cutting edges: 6 Cutting angle: 90° Internal coolant: Yes Compatible inserts: R390 18 Torx key: T15 Fixing screw: M4x10 Special features Suitable for R390 18 indexable inserts Interface compatible with Sandvik inserts Compact design for reduced overhang Targeted coolant supply to the insert seat SKU: T426-1TM FAQ Is this head compatible with all R390 18 insert variants? The Angle Tool Head accepts the R390 18 insert geometry; specific insert grades and chipformers from Sandvik should be checked against process requirements for best results. Does the head provide internal coolant to every insert position? Yes, the internal coolant channel supplies fluid to the cutting zone, improving thermal control and chip evacuation for the insert seat on this Teknik Makina turning head. What tool is required to change the insert screws? Insert retention uses an M4x10 screw with a Torx T15 interface; a T15 Torx key is specified for secure and quick insert replacement. Can the head be used for square-shoulder machining on small lathes? The compact 52 mm overall length and 80 mm body are designed for reduced overhang; suitability for a particular turret or toolpost should be confirmed against machine envelope and clamping specifications. Where is the product manufactured and how is it identified? The component is produced by Teknik Makina and is supplied under SKU T426-1TM for order and inventory tracking. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a tool head that combines rigid clamping and precise geometry: the T426TM offers a 27 mm shank and a 90° cutting angle, ensuring stable shoulder turning with R390‑1806 indexable inserts; order via Metav Werkzeuge or consult the team for application guidance. Corner tool head T426TM — turning tool head with 90° cutting angle for R390‑1806 indexable inserts (Teknik Makina) The Corner tool head T426TM is a compact, purpose‑built turning tool head for shoulder turning and finishing operations, designed to accept R390‑1806 indexable inserts for reliable, repeatable performance in CNC turning centres. 90° cutting angle for precise shoulder turning 27 mm shank diameter for rigid tool clamping Compatible with R390‑1806 Sandvik indexable inserts Torx screw M4x11, T15 key for secure fixing Rigidity and geometry for stable machining The T426TM is engineered to provide a stable platform for shoulder turning, combining a 27 mm shank with a compact overall length of 52 mm to reduce deflection in cantilevered set‑ups. The 90° cutting angle produces square shoulders with minimal side force, which helps maintain dimensional accuracy and surface finish. The tool head’s mass of 1.081 kg contributes to vibration damping, translating into longer insert life and fewer reworks on production components. Fast insert changes and secure clamping Designed specifically for R390‑1806 style indexable inserts, the head features a Torx M4x11 screw secured with a T15 key, enabling quick and consistent insert replacement with minimal downtime. Compatibility with Sandvik insert geometries ensures a wide selection of grades and edge preparations for roughing or finishing. The combination of a positive clamping seat and robust fixing prevents insert movement under interrupted cuts, improving process reliability. Clear application benefits for production environments This corner tool head excels in operations that demand defined shoulder faces and repeatability on turning centres. The configuration with six cutting edges and a standard interface supports efficient tool set‑up and inventory management in batch and series production. The tool head’s compact diameter of 80 mm and its defined geometry simplify integration into standard tool posts, allowing consistent results across multiple machines without complex re‑engineering. Simple set‑up, lower lifecycle costs Installation requires only the specified shank seat and the supplied Torx screw, so changeovers are straightforward and reproducible. The robust design reduces the frequency of unplanned maintenance and the need for special adaptors, supporting steady production flow and predictable tooling costs. For detailed compatibility checks or special insert grade recommendations, Metav Werkzeuge provides technical advice and access to a broad range of insert options and spare parts. For applications requiring precise shoulder turning with a secure, fast‑change solution, specify the Teknik Cutting Tools corner head T426TM and contact Metav Werkzeuge for tailored guidance and prompt supply from Emmerich — eMail info@metav-werkzeuge.com, tel +49 2822 7131930 Technical data SKU: T426TM Manufacturer: Teknik Makina Type: Corner tool head for R390‑1806 indexable inserts Torque screw: M4x11 Torx key size: T15 Compatible insert manufacturer: Sandvik Key figures Diameter: 80 mm Shank diameter: 27 mm Total length: 52 mm Cutting edges: 6 Weight: 1.081 kg Cutting angle: 90° Features Compatible with R390‑1806 indexable inserts Torx screw M4x11 for insert fixation Designed for shoulder turning and finishing Compact design for standard tool posts FAQ Which inserts fit this tool head? The corner tool head accepts R390‑1806 indexable inserts; compatibility with Sandvik grades offers selection for roughing and finishing applications. What shank diameter is required for mounting? Mounting requires a toolholder seat suitable for a 27 mm shank diameter as specified for the T426TM head. How is the insert secured in the head? Insert retention is via a Torx M4x11 screw tightened with a T15 key, providing secure and repeatable clamping. What is the primary application for this head? The head is intended for shoulder turning and operations where a true 90° face is required, delivering stable performance in CNC turning centres. Is the head suitable for interrupted cutting? The robust fixation and geometry of the T426TM minimise insert movement, making it well suited to interrupted cuts and demanding turning cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com