Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a compact, robust cutter head that combines precise indexing for SNKX 1206 inserts with straightforward fastening and maintenance; the result is dependable throughput and reduced downtime. Order directly via Metav Werkzeuge or consult the team for application advice. Planing cutter head T325TM — 80 mm diameter, for SNKX 1206 indexable inserts (Teknik Cutting Tools) The Planing cutter head T325TM is a dedicated machining head for face and planing operations using SNKX 1206 indexable inserts, delivering repeatable surface quality across batch production. For SNKX 1206 indexable inserts 80 mm cutter diameter Torx fastening M4x12.5, key T15 7 cutting edges, 45° cutting angle Consistent surface quality and reliable throughput The machining head is engineered to provide a steady cutting geometry that supports reproducible results in serial production. With an outer cutter diameter of 80 mm and a maximum cutting diameter of 93 mm, this design keeps cutting forces predictable and helps maintain machine stability. The balanced construction and modest mass support reduced vibration during operation, which improves tool life and lowers scrap rates. These rational performance advantages translate directly into measurable productivity gains on repetitive tasks. Wide compatibility reduces tooling complexity Designed specifically for the SNKX 1206 family of inserts, the head accepts inserts from recognised manufacturers such as Böhlerit, Korloy and Palbit, enabling flexibility in insert selection and supply chains. This interoperability reduces the need for multiple specialised holders and simplifies stock management. For operations that switch between grades or coatings, compatibility with common insert families means quicker adaptation to different materials and cutting conditions without swapping the holder. Fast, secure clamping for reduced downtime Tool changes and clamping are simplified by the proven Torx system: a M4x12.5 fastening screw secured with a T15 key ensures repeatable torque and secure seating of inserts. The head features seven cutting positions and a 45° rake geometry that together deliver a compromise between cutting efficiency and finish quality. Routine maintenance is straightforward; the accessible fastening system and standard key size mean lower tool-change times and fewer specialised consumables. Supplied dimensions and the standardised shank diameter of 27 mm permit predictable integration into existing toolholders and adaptors. Contact Metav Werkzeuge for expert guidance on integrating the Teknik Cutting Tools T325TM into existing setups or to request detailed compatibility checks; Metav's Emmerich team will advise on delivery and configuration Technical data SKU: T325TM Designation: Planing cutter head For inserts: for SNKX 1206 indexable inserts Manufacturer: Teknik Makina Data Cutter diameter: 80 mm Max cutting diameter: 93 mm Number of cutting edges: 7 Overall length: 52 mm Shank diameter: 27 mm Weight: 1.334 kg Cutting angle: 45° Special features Torx screw M4x12.5 Torx key size T15 Compatible with Böhlerit, Korloy, Palbit inserts Suitable for face and planing operations SKU reference T325TM FAQ What inserts fit this cutter head? The T325TM accepts SNKX 1206 indexable inserts; compatible brands include Böhlerit, Korloy and Palbit. What is the cutter diameter and maximum cutting range? The cutter head has an 80 mm diameter with a maximum effective cutting diameter of 93 mm. How are the inserts secured? Inserts are clamped with an M4x12.5 Torx screw, tightened using a T15 Torx key for consistent seating and repeatable torque. Is the head suitable for high-volume production? Yes — the balanced design, standardised shank diameter and straightforward insert changes make the head suitable for serial machining and reduced changeover time. Which supplier provides this product? This item is supplied under the Teknik Cutting Tools range and listed as SKU T325TM; Metav Werkzeuge can advise on delivery and integration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precise geometry and easy maintenance: the facing cutter head delivers consistent surface quality thanks to its 80 mm diameter and six cutting edges, while the standard 27 mm bore and Torx fastening ensure rapid insert changes and high production uptime. Order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Facing cutter head by Teknik Makina — 80 mm diameter, 6‑edge design for SNKX 1606 / ONHX 0606 inserts Facing cutter head designed for heavy‑duty facing and modular toolholder systems, compatible with SNKX 1606 and ONHX 0606 indexable inserts 80 mm diameter cutter head Fits SNKX 1606 and ONHX 0606 inserts 27 mm clamp bore for standard toolholders Six cutting edges with 45° cutting angle Stable surface finish through optimised geometry The toolbody provides a stable cutting platform by combining an 80 mm diameter with six cutting edges, which reduces load per insert and promotes an even material removal rate. The 45° cutting angle softens axial engagement and helps achieve a uniform finish while keeping cutting forces predictable. These characteristics result in repeatable performance on serial facing operations and fewer rejected parts due to surface irregularities. Fast insert changes and secure clamping to maximise uptime A standard 27 mm clamp bore allows straightforward integration into common toolholders, while the M5x12 Torx fastening and supplied T20 key enable secure and fast insert replacement. The compact overall length of 50 mm and weight of 2.013 kg contribute to a low moment of inertia and stable running, which means shorter machine set‑up times and less production downtime for routine maintenance. Broad compatibility for modular machining cells Compatibility with SNKX 1606 and ONHX 0606 indexable insert formats — including Palbit alternatives — offers flexibility when specifying cutting grades or geometries for different job requirements. The modular nature of the cutter head supports quick reconfiguration of machining centres and reduces the need for multiple dedicated toolbodies, delivering cost efficiency in multi‑product environments without compromising cut quality. Discuss specific applications or request a quotation from Metav Werkzeuge — contact our Emmerich office by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to evaluate suitability for the intended machining task Technical data SKU: T630TM Manufacturer: Teknik Makina Article name: Facing cutter head for SNKX 1606 and ONHX 0606 indexable inserts Facts Diameter: 80 mm Cutting edges: 6 Cutting angle: 45° Shank bore: 27 mm Overall length: 50 mm Weight: 2.013 kg Special features Compatible inserts: SNKX 1606, ONHX 0606 Compatible insert manufacturer: Palbit Fastening screw: M5x12 (Torx) Torx key size: T20 FAQ Which inserts are compatible with this cutter head? The facing cutter head accepts SNKX 1606 and ONHX 0606 indexable inserts; Palbit grades are commonly used as compatible alternatives. What effect does the 45° cutting angle have on machining? A 45° cutting angle reduces axial force and distributes load across the six cutting edges, improving surface finish and cutting stability for facing operations. What mounting interface is required for the toolbody? The toolbody requires a toolholder with a 27 mm clamp bore to mount securely and ensure correct concentricity. How are the inserts secured in place? Inserts are retained with an M5x12 Torx screw tightened with a T20 key, allowing controlled clamping torque and quick replacement. What are the physical dimensions and mass of the cutter head? The cutter head has an 80 mm diameter, 50 mm overall length and a mass of 2.013 kg, offering a compact yet stable solution for facing tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust cutting capacity and secure clamping for uninterrupted production: the 80 mm diameter and six cutting edges deliver efficient material removal while the 27 mm shank ensures stable mounting; order the component via Metav Werkzeuge or consult our specialists for technical matching. Face milling head for WNMX 09T3 indexable inserts — 80 mm diameter, 6 edges (Teknik Makina) The Face milling head is a compact cutter head engineered for face milling with WNMX 09T3 indexable inserts, compatible with Korloy inserts and intended for industrial milling applications. 80 mm diameter for broad cutting width Six cutting edges for steady material removal 27 mm shank for secure toolholder clamping Compatible with Korloy WNMX 09T3 inserts High material removal with consistent surface quality The geometry of the tool, featuring an 80 mm diameter and six cutting edges, is designed to increase throughput on repetitive face-milling tasks while maintaining a reliable surface finish. The multi-edge configuration spreads cutting forces across several inserts, which reduces individual insert load and supports stable chip formation. For production environments requiring repeatable passes, this design provides measurable gains in cycle time without sacrificing process stability. Secure mounting and straightforward maintenance A 27 mm shank and standardised fastening details allow confident clamping in common toolholders and contribute to tool rigidity. The head uses M3x7 screws tightened with a T8 Torx key, enabling quick insert changes and routine maintenance with workshop tools. Compatible with Korloy WNMX 09T3 indexable inserts, the system permits fast replacement of cutting edges to keep machine uptime high and maintenance intervals short. Compact design that reduces overhang and vibration With an overall length of 50 mm and a balanced mass of 1.077 kg, the component has been dimensioned to limit overhang and improve dynamic stability at the cutting zone. Reduced projection from the spindle helps to lower the risk of chatter in medium-duty face milling operations, thereby extending effective insert life and improving dimensional consistency across batches. Practical integration into production workflows The head’s interface and proven insert compatibility simplify tool management in mixed-machine workshops. Supplied for indexable insert use, the unit suits setups where fast indexability and minimal downtime are priorities. Technical documentation and compatibility details are available through Metav Werkzeuge to support purchasing decisions and ensure correct selection for specific machining tasks. For secure, high-performance milling with the Teknik Makina face milling head, contact Metav Werkzeuge for specification checks and supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T671-1TM Manufacturer: Teknik Makina SKU: T671-1TM Facts Diameter: 80 mm Overall length: 50 mm Shank diameter: 27 mm Weight: 1.077 kg Number of cutting edges: 6 Screw: M3x7 Torx key: T8 Special features For WNMX 09T3 indexable inserts Compatible with Korloy inserts Indexable insert face milling head Compact 50 mm overall length FAQ What insert type is required for this head? The head is designed for WNMX 09T3 indexable inserts and is compatible with Korloy WNMX 09T3 inserts for straightforward procurement and tool management. Which fastening tools are needed for insert changes? Insert clamping uses M3x7 screws requiring a T8 Torx key; standard workshop Torx tools are suitable for maintenance. How does the 27 mm shank benefit machining? A 27 mm shank provides a secure interface with common toolholders, improving rigidity and reducing vibration during face milling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, production‑oriented solution that combines a broad 80 mm cutting diameter with seven cutting edges for consistent face removal; secure clamping via an M4x12.5 Torx screw (T15) reduces changeover time and keeps cycle times predictable — order via Metav Werkzeuge or consult our advisors for integration support. Face Milling Head T345TM by Teknik Makina — Ø 80 mm, 7 cutting edges A Face Milling Head T345TM engineered for efficient face milling using 1206‑size indexable inserts in workshop and production environments Compatible with SNMX 1206 indexable inserts Ø 80 mm cutter head for wide face milling Seven cutting edges for uniform material removal 27 mm mounting diameter for stable arbor fit M4x12.5 Torx clamp screw, T15 key required Faster, more consistent face milling with predictable results The milling head is configured to deliver steady material removal across broad surfaces: the Ø 80 mm diameter and seven cutting edges distribute cutting forces evenly, which reduces vibration and helps maintain surface quality. The specified cutting angle 88° is optimised for face operations, allowing high stock removal rates while preserving insert life. This combination supports shorter cycle times and a more reliable production flow, translating into measurable efficiency gains in repetitive machining tasks. Secure clamping and rapid insert handling to cut downtime Clamping is executed with a M4x12.5 Torx screw tightened with a T15 key and a 27 mm mounting diameter ensures a rigid fit on the arbor. The robust clamping arrangement enables quick insert changes and repeatable seating, so tool changes are completed with minimal disruption. As a result, maintenance intervals are straightforward to plan and machine uptime is increased, which supports tighter production scheduling and reduced unplanned stops. Built for integration in production toolsets Compatibility with 1206‑sized indexable inserts and documented fit to common manufacturers streamlines tool inventory: the head accepts inserts of the 1206 family and is matched to mainstream supplier forms. The design is intended for straightforward adoption in existing setups, allowing the milling head to be mounted on standard spindles and arbors without bespoke adaptors. This reduces procurement complexity and helps centralise stocking of cutting components across the workshop. Clear application fit and dependable specification The cutter is specified for face milling applications where broad contact and consistent finishes are required. The tool body’s dimensions — Ø 80 mm, overall length 50 mm and a compact weight of about 1.213 kg — support stable handling and straightforward mounting. The combination of indexed inserts and a repeatable clamping system yields a cost‑effective solution for series machining and maintenance workshops, while Korloy‑compatible insert options widen sourcing choices. Contact Metav Werkzeuge today to discuss how the Teknik Cutting Tools Face Milling Head T345TM with 1206 insert compatibility can be integrated into an existing toolset or production line; our consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: T345TM Product: Face milling head For: for SNMX 1206 Indexable Inserts Manufacturer: Teknik Makina Facts Diameter: 80 mm Mounting diameter: 27 mm Cutting edges: 7 Overall length: 50 mm Cutting angle: 88° Weight: 1.213 kg Clamp screw: M4x12.5 Torx key: T15 Special features Compatible with Korloy 1206 inserts Designed for indexable insert face milling Robust Torx clamp for repeatable seating Compact, production‑ready format FAQ Which insert size fits this milling head? The milling head is specified for 1206‑size indexable inserts; Teknik Makina’s T345TM accepts standard 1206 forms for face milling. Which clamp screw and key are required for insert changes? Insert clamping uses an M4x12.5 Torx screw; a T15 Torx key is required to secure and release the inserts on the T345TM. What is the mounting diameter for the arbor fit? The tool is designed with a 27 mm mounting diameter to ensure stable seating on compatible arbors and reduce runout during face milling. How many cutting edges does the head provide and what is the benefit? The head features seven cutting edges, which distribute load for smoother material removal and improved surface finish during face operations. Is the cutter compatible with Korloy inserts? Yes, the T345TM is compatible with Korloy 1206‑format indexable inserts, facilitating sourcing from a leading insert manufacturer. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Optimise milling productivity with a robust face milling head that pairs an Ø 80 mm diameter and a 45° cutting angle with compatibility for SNKX 1206 and ONHX 0505 indexable inserts — order directly via Metav Werkzeuge or consult their technical team for integration advice. Face milling head (Planmesserkopf) by Teknik Makina — Ø80 mm, 45° cutting angle The Face milling head (Planmesserkopf) is designed as a compact cutter body for medium-duty roughing and finishing operations using SNKX 1206 and ONHX 0505 indexable inserts, suitable for a wide range of metal-cutting applications where stable chip control and repeatable geometry are required Ø 80 mm cutter diameter 7 cutting edges for even material removal Compatible with SNKX 1206 and ONHX 0505 inserts M4x10 Torx screw, T15 drive High material-removal rate with controlled cutting geometry The cutter body delivers an efficient machining balance by combining a 45° cutting angle with a moderate diameter, enabling higher feed rates with conservative depth-of-cut settings. This geometry reduces cutting forces on the spindle while promoting consistent chip formation; the result is improved tool life of the insert and a reduction in vibration-related surface defects. The combination of angle and cutter size is particularly effective in operations that demand both rapid stock removal and acceptable surface finish in serial production environments. Secure mounting and machine compatibility for reliable cycles Designed with a 27 mm shank, the head offers a compact and rigid interface for many standard toolholders. The solid construction and defined mounting dimensions ensure a secure fit, minimising runout and therefore preserving the insert edge life. The retention system uses an M4x10 Torx screw with a T15 drive, supplying a repeatable clamping torque for each index change. Clear mechanical interfaces reduce set-up time and make the tool suitable for repetitive production runs where reproducibility is essential. Flexible insert options to match workpiece requirements The cutter is specified for SNKX 1206 indexable inserts and is also compatible with ONHX 0505 Palbit-style alternatives, enabling selection between grades and geometries to suit material and process: from general-purpose steels to more demanding alloyed materials. Using standardised insert types simplifies inventory management and allows the machining strategy to be adjusted quickly — for instance, switching to a tougher grade when machining interrupted cuts or to a finer grade for improved surface finish. Robust design for consistent tool performance With seven cutting edges distributed on the periphery and an overall length of 50 mm, the tool body is engineered to deliver homogeneous material engagement and even wear distribution across the insert set. The Ø 80 mm diameter ensures adequate cutting circumference for productivity while keeping the assembly compact. The mass of 1.051 kg contributes to damping during cutting, helping to stabilise the cutting process in medium-duty applications and supporting repeatable tolerances across series components. For reliable supply and expert compatibility advice on the Teknik Makina face milling head (SKU T625TM), contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss tooling configurations and lead times Technical Data Article number: T625TM Designation: Face milling head (Planmesserkopf) Manufacturer: Teknik Makina Compatible inserts: SNKX 1206, ONHX 0505 ECLASS: 21181015 Key Dimensions Diameter: 80 mm Shank diameter (D): 27 mm Overall length: 50 mm Number of cutting edges: 7 Cutting angle: 45° Weight: 1.051 kg Materials & Features Compatible insert make: Palbit Torx screw: M4x10 Torx key drive: T15 Alternative inserts: ONHX 0505 Palbit FAQ What insert types fit this face milling head? The face milling head accepts SNKX 1206 indexable inserts and is compatible with ONHX 0505 Palbit-style alternatives for flexible application choices. Which shank diameter is required for mounting? A toolholder with a 27 mm shank interface is required for secure mounting of the Teknik Makina face milling head (SKU T625TM). How many cutting edges are provided and what is their benefit? The cutter body uses seven cutting edges, which promote even wear distribution and consistent material removal for improved cycle stability. Is a specific screw or driver needed for insert clamping? Insert clamping uses an M4x10 Torx screw with a T15 drive to ensure repeatable clamping torque and secure retention. What are the typical applications for this cutter? The head is intended for medium-duty roughing and finishing on steels and similar alloys where a balance of stock removal and surface quality is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, precisely dimensioned cutter head that combines an 80 mm diameter, a 45° cutting angle and compatibility with SNMU 1305 indexable inserts for smoother faces and reduced tool change frequency; order or request advice via Metav Werkzeuge for reliable supply and application guidance. Face milling head T236TM by Teknik Makina — 80 mm diameter, for SNMU 1305 indexable inserts A face milling head T236TM engineered for efficient face milling operations with SNMU 1305 indexable inserts, delivering stable cutting geometry and straightforward mounting for production and jobbing environments. 80 mm nominal diameter Compatible with SNMU 1305 inserts (ISCAR) Seven cutting edges for long tool life 45° cutting angle for smooth cutting Torx M5x12 screws, T20 key Stable cutting performance with fewer interruptions The cutter head is built to deliver consistent results in face milling: the 45° cutting angle reduces radial cutting forces and supports a finer surface finish, while the arrangement of seven cutting edges extends effective service between index changes. This combination improves cycle-time efficiency and helps maintain dimensional accuracy across batches. The tool geometry is especially suitable where predictable chip flow and steady cutting forces are required to keep milling operations productive and repeatable. Secure mounting and straightforward maintenance Clamping is handled via M5x12 Torx screws that require a T20 key, offering a secure, repeatable fixation of each insert pocket and reducing the risk of loosening under vibration. The head’s 27 mm bore ensures precise seating on compatible toolholders, enabling reliable concentricity and quick setup. Robust fastenings and accessible screwheads translate into shorter maintenance intervals and less downtime for insert changes and inspections. Compact dimensions for versatile machine integration With an 80 mm diameter and an overall height of 52 mm, this head is compact enough for versatile integration yet substantial enough to provide mass for vibration damping; the recorded mass of 1.147 kg indicates a solid build that assists in absorption of cutting dynamics. The compact footprint aids in achieving required clearances on multi-axis machines and reduces collision risk while preserving the cutter’s structural stability during medium-duty face milling. Proven compatibility and supply confidence The design accepts SNMU 1305 format inserts and is specified for compatibility with ISCAR grades, enabling selection from a wide range of insert geometries and grades for varied machining tasks. Supplied under the Teknik Makina designation and identified as SKU T236TM, the head suits shops seeking standardised insert systems that simplify tooling inventories. Metav Werkzeuge’s European stock and quality filter provide dependable access to these components and support consistent supply for production planning. Contact Metav Werkzeuge for availability and application advice on Teknik Makina face milling heads with SNMU 1305 compatibility — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored guidance and procurement support Technical data Article number: T236TM Manufacturer: Teknik Makina ECLASS: 21180902 Core dimensions Diameter: 80 mm Overall height: 52 mm Bore / mounting diameter: 27 mm Cutting angle: 45° Cutting edges: 7 Weight: 1.147 kg Features & mounting For SNMU 1305 indexable inserts Compatible insert brand: ISCAR Torx screw: M5x12 Torx key size: T20 Solid, compact construction FAQ Is this head compatible with standard SNMU 1305 inserts? Yes. The head accepts SNMU 1305 indexable inserts and is specified for compatibility with ISCAR insert grades for interchangeability and easy sourcing. What fastening hardware is required for insert clamping? Insert clamping uses M5x12 Torx screws; a T20 Torx key is required for tightening and removal of the screws. What are the key dimensions to check before fitting to a toolholder? Check the 80 mm diameter, 27 mm bore for the mounting interface and the overall height of 52 mm to ensure machine clearance and correct seating. How does the 45° cutting angle affect machining results? A 45° cutting angle reduces radial load on the tool, promoting smoother surface finishes and more even chip formation, which supports steadier machining and longer insert life. Which SKU should be ordered for this Teknik Makina head? Order SKU T236TM for the Teknik Makina face milling head designed for SNMU 1305 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of an 80 mm cutting diameter combined with internal coolant and six cutting edges for reliable chip control and sustained machining performance; order the cutter directly via Metav Werkzeuge or consult our advisors for sizing and application support. Round Insert Milling Cutter T464-1TM — 80 mm, internal coolant, for RCKT 1204 indexable inserts (Teknik Makina) The Round Insert Milling Cutter T464-1TM is a robust machining head designed for industrial face milling and high-stability material removal using RCKT 1204 indexable inserts 80 mm diameter for broader cutting width Internal coolant for improved chip evacuation Six cutting edges for stable material removal Compatible with Sandvik RCKT 1204 inserts Greater throughput thanks to broad cutting geometry The cutter’s 80 mm diameter and six cutting edges produce a wider effective cutting width, which supports a higher material removal rate while maintaining surface quality. The 45° cutting arrangement reduces axial forces, which leads to smoother engagement and less vibration during heavy passes. These geometric characteristics are designed to improve cycle-time efficiency in series production and to provide predictable results for repetitive operations. Reduced downtime through controlled cooling and secure clamping Equipped with internal coolant, the tool channels cutting fluid directly to the insert pockets, which improves chip evacuation and cooling where it is needed most. This targeted supply helps to extend tool life and reduce thermal wear on the inserts. The inserts are secured by a Torx system (Torx key: T15) and Torx screw M3.5x8.5, ensuring a firm seat and quick replacement during maintenance intervals. The cutter’s overall length of 50 mm and mass of 1.088 kg balance rigidity with manageable handling for set-up tasks. Compatibility and practical application features for workshop use Designed for use with RCKT 1204 indexable inserts from Sandvik, the cutter is a practical choice where reliable insert availability and proven insert geometries are required. The T464-1TM is suited to industrial milling operations that demand consistent chip control and repeatable set-up, particularly in face-milling or planing applications. Installation is straightforward and the modular nature of the insert system simplifies inventory management and replacement procedures. Contact Metav Werkzeuge in Emmerich for application advice and to secure the Teknik Makina T464-1TM; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: T464-1TM Manufacturer: Teknik Makina ECLASS: 21180902 Facts Diameter: 80 mm Overall length: 50 mm Weight: 1.088 kg Cutting edges: 6 Cutting angle: 45° Special features Internal coolant For RCKT 1204 indexable inserts Compatible insert manufacturer: Sandvik Torx key: T15 Torx screw: M3.5x8.5 FAQ What inserts fit this cutter? The cutter accepts RCKT 1204 indexable inserts; compatibility with inserts from Sandvik is specified for the T464-1TM. How does internal coolant benefit machining? Internal coolant in the T464-1TM delivers fluid directly to the cutting zone, improving chip removal and helping to prolong insert life under continuous operation. How many cutting edges are active on the tool? The milling head is equipped with six cutting edges, which distributes cutting forces and supports stable material removal. Which fastening system is used for the inserts? Inserts are fastened with Torx screws (M3.5x8.5) using a Torx T15 key for positive clamping and simple replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust indexable design combined with an 80 mm diameter and 8 cutting edges for sustained material removal, plus a secure 27 mm shank that supports stable mounting and repeatable results. For purchasing or technical integration, consult Metav Werkzeuge for lead times and compatibility. Disc cutter DF088TM by Teknik Makina — 80 mm disc cutter with indexable inserts The disc cutter DF088TM delivers a compact, indexable solution for milling operations where repeatability and efficient material removal are decisive, designed for use with triangular inserts in industrial machining environments. 80 mm diameter for high engagement Accepts SCMT 09T3 inserts Secure 27 mm shank mounting Eight indexable cutting edges Faster removal rates with stable machining The tool’s combination of an 80 mm diameter and 8 cutting edges allows higher material removal per spindle revolution while maintaining balanced forces on the tool holder. With an indicated axial depth of cut of 17 mm, the geometry is suited to deeper passes where the process calls for productive roughing. The robust 27 mm shank helps ensure precision clamping and reduces chatter risk in standard milling fixtures, which translates into fewer reworks and shorter cycle times on the shop floor. These attributes emphasise measurable productivity improvements rather than speculative claims. Lower tooling costs and simplified setup through insert compatibility Compatibility with SCMT 09T3 indexable inserts reduces tooling inventory and simplifies replenishment: rotated or replaced inserts restore cutting edges quickly without regrinding solid tools. Fastening is handled by a M4x11 Torx screw and a T15 key, which standardises tightening and replacement procedures in the workshop. The indexable design therefore shortens downtime during tool changeovers and keeps machine utilisation high, supporting a clear cost-benefit argument for production planning and purchasing decisions. Workshop-friendly dimensions and reliable handling At roughly 0.445 kg, the cutter is lightweight for its class, aiding manual handling and safe changeover. A 12 mm cutting height provides sufficient engagement depth for a variety of slotting and face-milling tasks while keeping the tool profile compact. The combination of size and balanced design assists in tool balancing and consistent surface results, helping maintain process stability and reducing inspection rejects. Where precision and repeatability matter, this indexable disc cutter supports routine integration into existing machining setups. For procurement, technical questions or to discuss how the Teknik Cutting Tools DF088TM fits into an existing machining process, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to arrange specifications and availability Technical data Article number: DF088TM Manufacturer: Teknik Makina Product: Disc cutter Suitable for inserts: SCMT 09T3 Torx screw: M4x11 Torx key: T15 Files: 62de7eee33927e49dbf32796, 62de7e60bd24461b3d5f7a33 Core data Diameter: 80 mm Cutting edges: 8 Cutting height: 12 mm Axial depth (ap): 17 mm Shank diameter: 27 mm Weight: 0.445 kg Special features Indexable inserts compatible: SCMT 09T3 Torx fastening system SKU: DF088TM FAQ Which inserts fit this cutter? The disc cutter DF088TM is designed for SCMT 09T3 triangular indexable inserts; insert compatibility enables quick edge renewal. What is the maximum axial depth of cut? The specified axial depth (ap) is 17 mm, which denotes the recommended engagement for productive passes under typical conditions. How is the cutter secured in the holder? Mounting uses a 27 mm shank together with Torx fastening: M4x11 screw tightened with a T15 key for secure clamping. How many cutting edges are available per revolution? The tool features 8 cutting edges, offering increased engagement and distributed cutting forces for improved removal rates. Is the cutter suitable for frequent insert changes? Yes — the indexable design with standard SCMT 09T3 inserts and Torx fastening supports rapid insert replacement and consistent tool set-up. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Characteristics: Order Number: T206TM Item: Face Mill usable with ADKT 1505 Indexable Inserts of ISCAR Brand: Teknik Makina Numbers and Data: Diameter: 80mm Cutting Edges: 7 Weight: 1.152kg Total length: 52mm Diameter Connection: 27mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Product Information: Order Number: T659TM Item: Face Mill usable with ANHX 1004 Indexable Inserts of Palbit Brand: Teknik Makina Numbers and Data: Diameter: 80mm Cutting Edges: 8 Weight: 1.132kg Total length: 50mm Diameter Connection: 27mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust design, secure clamping and easy insert replacement for continuous, high-efficiency milling — order directly via Metav Werkzeuge or consult our specialists for integration advice. Indexable Round Face Mill T464TM — 80 mm, 6‑cutters (Teknik Makina) The Indexable Round Face Mill T464TM is an industrial milling head designed for face milling operations using RCKT 1204 indexable inserts, suitable for production and jobbing environments where reliable tool change and stable cutting are required. 80 mm diameter for broad material engagement Six cutting edges for steady material removal Fits RCKT 1204 indexable inserts 27 mm arbor bore for secure mounting Greater productivity through stable cutting geometry The combination of an 80 mm diameter and six cutting edges provides a wide cutting path and a balanced load distribution, which leads to consistent material removal and reduced vibration during operation. With round-style indexable inserts, the cutter delivers a predictable surface finish while spreading cutting forces over multiple edges. This setup lowers the frequency of tool changes and helps maintain cycle-time targets on medium‑ to high‑volume jobs. Fast, reliable clamping and maintenance A 27 mm arbor bore ensures a secure mounting interface that minimises runout and wobble on the spindle, supporting precise engagement in face milling operations. Insert retention is achieved with M3.5x8.5 Torx screws and a T15 key, allowing straightforward, safe insert changes without specialised fixtures. The use of standard Torx hardware shortens maintenance intervals and reduces downtime, contributing directly to shop-floor uptime and throughput. Compatible insert system for supply-chain convenience Engineered for RCKT 1204 indexable inserts and compatible with Sandvik insert types, the tool head lets workshops source proven insert grades for roughing or finishing as required. Indexable inserts permit multiple edge usages per insert, improving cost-efficiency per cutting edge and simplifying inventory compared with solid tools. For operations where repeatability and predictable consumable life are priorities, this arrangement supports both process planning and cost control. Practical integration into workshop workflows The cutter is a pragmatic choice for manufacturers seeking a balance of performance and serviceability. The robust construction and standardised fastening enable quick fitment on compatible toolholders, while the round insert format mitigates the impact of edge damage through rapid indexing. Combined with Metav’s supply and advisory services, the tool can be integrated into established purchasing and maintenance routines to ensure steady availability and technical support when adjusting process parameters. Contact Metav Werkzeuge for tailored technical advice and procurement assistance — request the Teknik Makina T464TM via Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for specification checks and delivery options Technical data Article number: T464TM Manufacturer: Teknik Makina Product name: Indexable Round Face Mill (for RCKT 1204 Indexable Inserts) Core dimensions Diameter: 80 mm Number of cutting edges: 6 Overall length: 50 mm Arbor bore (d): 27 mm Weight: 1.088 kg Special features Compatible inserts: RCKT 1204 Insert brand compatibility: Sandvik Torx screw: M3.5x8.5 Torx key: T15 FAQ Which insert type does this milling head accept? The Indexable Round Face Mill T464TM accepts RCKT 1204 indexable inserts and is specified as compatible with Sandvik insert variants. What is the cutter diameter and how many cutting edges are fitted? The cutter has an 80 mm diameter and is equipped with six cutting edges for balanced material removal. What arbor size is required to mount the tool? A 27 mm arbor bore is required for secure mounting of the milling head. How are the inserts secured and which tool is needed to change them? Inserts are fixed with M3.5x8.5 Torx screws; a T15 Torx key is used for insert replacement. What benefits do indexable inserts provide compared with solid cutters? Indexable inserts on the T464TM allow multiple edge uses per insert, reduce downtime for regrinding, and simplify inventory by using standardised consumables. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-stability cutter that combines an 80 mm diameter and six cutting edges for efficient material removal; order the tool directly via Metav Werkzeuge or contact the consultants for technical advice. Round Insert Milling Cutter T294TM – 80 mm diameter, for RDMT 1003 indexable inserts (Teknik Makina) The Round Insert Milling Cutter T294TM is a robust milling head designed for indexable-insert milling with RDMT 1003 inserts, suited to operations where fast index changes and consistent cutting geometry are required. 80 mm cutting diameter Six cutting edges 27 mm shank diameter For RDMT 1003 indexable inserts High-volume removal with repeatable accuracy The cutter’s 80 mm diameter and six cutting edges deliver a balance between material removal rate and tool life, enabling steady throughput in batch operations. Using RDMT 1003 indexable inserts means cutting edges can be rotated or replaced without regrinding, reducing downtime and keeping process repeatability high. The tool’s mass of 1.033 kg contributes to stable rotation, while the 27 mm shank assists in achieving secure clamping in standard toolholders; together these factors help to lower vibration and maintain a consistent cutting geometry, which in turn promotes reliable surface finish quality. Fast index changes and secure screw clamping The cutter is secured by a locking screw system that uses a locking screw M3.5 and a Torx screw M3.5×8.5 interface, compatible with a Torx T15 driver. This standardised clamping arrangement simplifies insert replacement and repeatable reassembly, supporting short maintenance cycles on the shop floor. The Torx connection provides positive engagement for precise torque transmission, which helps to maintain correct seating of inserts and consistent cutting performance without the need for complex tools. Reduced overhang and workshop benefits from compact design With a total length of 50 mm, the design minimises overhang, improving concentricity and lowering the likelihood of chatter compared with longer holders. That compact footprint makes the cutter well suited to setups where access is limited or where rigidity is critical. The combination of a stout 27 mm shank and a compact body reduces stress on the holder interface and contributes to longer life for both inserts and the cutter body. For production planners and workshop managers, this means fewer interruptions for tool change and steadier production quality across runs. For workshop purchasing and technical enquiries about the Teknik Makina Round Insert Milling Cutter T294TM—including availability of compatible inserts and mounting advice—contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 to request detailed specifications or place an order. Technical data SKU: T294TM Manufacturer: Teknik Makina Product name: Round Insert Milling Cutter (for RDMT 1003 Indexable Inserts) Data Diameter: 80 mm Shank diameter: 27 mm Cutting edges: 6 Total length: 50 mm Weight: 1.033 kg Special features For RDMT 1003 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key interface: T15 SKU repeated: T294TM FAQ Which insert type fits this cutter? The cutter is designed for RDMT 1003 indexable inserts; these inserts match the cutter’s pocket geometry and provide the specified edge count and cutting geometry. What is the shank diameter and what holders are compatible? The tool has a 27 mm shank, suitable for toolholders and collets that accept a 27 mm shank diameter; the compact length also aids rigid clamping. How many cutting edges are on the tool and what does that mean? The cutter has six cutting edges, allowing balanced cutting forces and a higher material removal rate while enabling multiple index positions per insert for extended life. Which screw and driver are used to secure the inserts? Inserts are secured with a locking screw M3.5 and a Torx screw M3.5×8.5; a Torx T15 driver interface is used for tightening to the required seating. What are the main workshop advantages of this cutter? The compact 50 mm total length and solid 27 mm shank reduce overhang and vibration, improving concentricity and repeatability during production with RDMT 1003 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of high material removal rates, internal coolant and compatibility with RDMT 1003 indexable inserts for reliable finishing and reduced downtime; order or discuss application details with Metav Werkzeuge for tailored advice. T294-2TM — 80 mm Round Insert Milling Cutter for RDMT 1003 with Internal Coolant (Teknik Makina) A round insert milling cutter designed for face and finishing operations, compatible with RDMT 1003 indexable inserts and engineered to deliver consistent tool life through integrated coolant delivery 80 mm diameter for broad machining Internal coolant for improved tool life Compatible with RDMT 1003 indexable inserts Six cutting edges for efficient material removal Maximised productivity through geometry and insert choice The tool’s 80 mm diameter and arrangement of six cutting edges produce a stable cutting rhythm that lowers vibration and raises throughput. By using standard RDMT 1003 inserts, the system provides flexibility: grades and chipform geometries can be selected to suit either roughing or finishing tasks, which keeps setup complexity low while improving cycle times. The result is a measurable uplift in productivity and fewer unplanned tool changes, making the cutter an efficient choice for shops that value predictable machining output. Direct coolant delivery to preserve edge integrity Integrated internal coolant channels deliver cutting fluid close to the contact zone, reducing heat build-up and aiding chip evacuation. This targeted cooling reduces thermal wear on the insert edge, extending the time between indexings and replacements. The improved thermal control also helps maintain consistent surface finish on vulnerable components, so operators obtain repeatable part quality even in extended runs. Robust mounting and straightforward indexable insert changes Designed with practical workshop handling in mind, the cutter uses Torx fixation for secure clamping: Torx key T15 and screws M3,5x8,5 ensure fast, reliable insert swaps and repeatable clamping torque. The overall length of 50 mm and a shank interface of 27 mm contribute to stable toolholding and reduced overhang, which together minimise deflection during heavy cuts. Those engineering choices reduce set-up time and make the system easier to integrate into existing tool inventories. Application flexibility and process reliability The head geometry and compatibility with standard RDMT 1003 inserts allow the cutter to be adapted across a range of milling tasks where indexable inserts are preferred. Selecting the appropriate insert grade and geometry lets the tool address both stock removal and final pass requirements, offering a balance between cutting performance and economy. For operations requiring consistent repeatability, the combination of a stable cutter body and targeted coolant makes this a dependable component of a production-focused tooling strategy. For specific application guidance or to secure a reliable supply of the Teknik Makina T294-2TM round insert milling cutter, contact Metav Werkzeuge in Emmerich for technical advice and order support by phone or email. Technical data Article number: T294-2TM Product type: Round insert milling cutter Brand: Teknik Makina Category: Planmesserkopf Facts Diameter: 80 mm Overall length: 50 mm Shank diameter: 27 mm Weight: 1.033 kg Number of cutting edges: 6 ECLASS: 21180902 Special features Internal coolant Compatible with RDMT 1003 indexable inserts Torx key: T15 Torx screw: M3,5x8,5 FAQ Which inserts fit this cutter? The cutter accepts RDMT 1003 indexable inserts; insert grade and geometry should be chosen to match the material and desired surface finish for optimal performance. Does the tool provide internal coolant? Yes — the T294-2TM incorporates internal coolant channels to lower cutting temperatures and improve chip evacuation for longer tool life. How many cutting edges and what are the main dimensions? The tool has six cutting edges, a diameter of 80 mm, an overall length of 50 mm and a shank interface of 27 mm for stable mounting. Which torque system is used for insert clamping? Insert clamping uses Torx fixation; the required key is T15 and the fixing screws are M3,5x8,5, enabling quick and secure insert changes. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-removal-rate solution: the face milling cutter combines an 80 mm cutting diameter with six cutting edges and a robust 27 mm shank for reliable toolholder engagement; order via Metav Werkzeuge or consult our specialists for application advice. Rundplattenfräser face milling cutter by Teknik Makina — 80 mm, for RDMT 12T3 indexable inserts Rundplattenfräser by Teknik Makina is a precision face milling cutter designed for efficient material removal using RDMT 12T3 indexable inserts, suitable for diverse machining tasks in production and job-shop environments 80 mm diameter for efficient face milling Six cutting edges for higher material removal 27 mm shank for secure toolholder fit Compatible with RDMT 12T3 indexable inserts Faster metal removal with predictable cutting performance The cutter’s 80 mm diameter and configuration of six cutting edges deliver a high material removal rate while maintaining stable chip evacuation. This geometry reduces cycle times on interrupted and continuous cuts alike, resulting in measurable productivity gains in series production. Where familiar technical terms appear: an indexable solution means the replaceable insert seats carry the cutting load, minimising downtime because only the inserts are renewed, not the complete toolbody. The combination of cutter diameter and edge count is particularly effective on broad faces and shoulders, offering a balance between surface finish and cutting economy. The design supports consistent tool life and repeatable results across batches. Robust clamping and straightforward insert service for less downtime A 27 mm shank ensures a rigid connection to the toolholder and reduces vibration during heavy cuts, contributing to improved surface integrity and longer insert life. The cutter uses a locking screw (M3.5) and a Torx screw M3.5 x 8.5 with key T15, engineered for quick, repeatable clamp torque while keeping handling simple for workshop teams. The secure fixation minimises the risk of unseating under load and simplifies maintenance routines: when an insert reaches its limit, only the RDMT 12T3 insert needs replacing. This approach lowers consumable costs over the tool’s service life and supports a controlled production schedule with fewer unexpected interruptions. Practical choice for flexible production and reliable results Weighing approximately 0.925 kg, the cutter combines manageable mass with sufficient stiffness for medium-duty face milling operations. Compatibility with RDMT 12T3 indexable inserts enables access to a wide range of grades and chipformer geometries, allowing selection for steel, cast iron or aluminium applications where applicable. The modular nature of the system supports both small-batch flexibility and the repeatability required in larger runs, making it a pragmatic option for subcontractors and in-house workshops alike. In practice, this means fewer tool changes, predictable machining quality and a straightforward route to improved throughput. Discuss your application requirements with Metav Werkzeuge — our consultants in Emmerich will advise on suitable insert grades and machining parameters or arrange supply of the cutter and matching inserts from stock Technical data Article number: T286TM Manufacturer: Teknik Makina Product name: Rundplattenfräser for RDMT 12T3 indexable inserts Measurements Diameter: 80 mm Cutting edges: 6 Overall length: 50 mm Shank diameter: 27 mm Weight: 0.925 kg Special features For RDMT 12T3 indexable inserts Locking screw: M3.5 Torx screw: M3.5 x 8.5 Torx key: T15 FAQ What insert type fits this face milling cutter? The face milling cutter accepts RDMT 12T3 indexable inserts; the design is optimised for this insert size to ensure correct seating and chip control. How is the cutter secured in the toolholder? The cutter uses a 27 mm shank for a rigid fit and is retained on the insert seats by a locking screw (M3.5) and Torx screw (M3.5 x 8.5) requiring a T15 key for insert changes. Is the cutter suitable for series production? Yes, the tool’s combination of six cutting edges and robust shank provides the stability and repeatability required for series production runs. What is the weight and overall length of the tool? The cutter has an overall length of 50 mm and a weight of approximately 0.925 kg, offering a balance between stiffness and manageable handling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Efficient machining is achieved by combining an 80 mm diameter, a seven‑cut configuration and a robust 27 mm shank, delivering stable face milling and predictable chip control; order the tool via Metav Werkzeuge or consult our specialists for technical guidance. Indexable face mill T286-1TM – 80 mm diameter, for RDMT 12T3 indexable inserts (Teknik Makina) The indexable face mill T286-1TM is engineered for precision face milling using RDMT 12T3 indexable inserts, offering a compact overall length for easy integration into standard toolholding systems 80 mm diameter for broad face milling Accepts RDMT 12T3 indexable inserts 27 mm shank for rigid toolholding Seven cutting edges for efficient material removal More productive passes with consistent chip load The combination of an 80 mm diameter and seven cutting edges reduces the number of required passes while keeping the chip load consistent. This design promotes steady metal removal rates and helps maintain surface quality over longer tool runs. For workshops aiming to increase throughput, the multi‑cut layout supports continuous cutting with balanced forces, which lowers vibration and contributes to reliable cycle times. Secure clamping for repeatable results A 27 mm shank and positive clamping elements ensure that the cutter sits firmly in the holder, giving improved runout characteristics and repeatability. The tool uses an M3.5 locking screw and a M3.5x8.5 Torx screw tightened with a T15 Torx key, enabling straightforward, secure insert fixation. The stable interface reduces rework and simplifies setup checks between jobs, which is especially valuable for series production. Fast insert changes and straightforward maintenance Compatibility with RDMT 12T3 indexable inserts makes replacement and inventory management straightforward; common insert formats speed up maintenance and lower tooling costs. The accessible screw arrangement and standard T15 key requirement allow insert swaps to be completed quickly, minimising downtime and keeping the spindle running. Clear, repeatable procedures mean less time at the bench and more productive machining hours. Compact dimensions for easy integration on the shop floor With an overall length of 50 mm and a mass of 0.95 kg, the cutter is compact yet robust enough for typical face milling duties. The modest envelope aids accessibility in constrained setups and reduces interference risk in multi‑tool operations. Supplied as SKU T286-1TM, the tool is ready to be slotted into existing tool chains and tool lists without elaborate modifications. Contact Metav Werkzeuge today to discuss availability of the T286-1TM indexable face mill, check compatibility with existing holders or request personalised advice from our Emmerich‑based specialists. Technical data Article number: T286-1TM Manufacturer: Teknik Makina Product: Indexable face mill Compatible inserts: RDMT 12T3 ECLASS: 21180902 ETIM: EC011860 Facts Diameter: 80 mm Cutting edges: 7 Overall length: 50 mm Shank diameter: 27 mm Weight: 0.95 kg Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Special features For RDMT 12T3 indexable inserts Compact overall length for confined setups Robust shank for stable toolholding FAQ What inserts are compatible with this face mill? Compatibility is based on RDMT 12T3 indexable inserts; the face mill accepts standard RDMT 12T3 geometry for straightforward procurement and replacement. How is the insert secured in the cutter? Inserts are secured with an M3.5 locking screw and an M3.5x8.5 Torx screw; a T15 Torx key is used for tightening to ensure reliable fixation. Which shank size is required for the holder? The cutter uses a 27 mm shank diameter, suitable for holders designed for a 27 mm tool interface. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust combination of high material-removal capacity, internal coolant and secure indexable-insert clamping for stable production cycles; these qualities make the cutter a practical choice in series machining. Order the face milling head via Metav Werkzeuge or consult the team for application guidance. 80 mm face milling head T274-1TM – for RDMT 1604 indexable inserts, internal coolant (Teknik Makina) The 80 mm face milling head T274-1TM is a compact, production-oriented cutter designed for face milling tasks using RDMT 1604 indexable inserts and a through‑tool coolant supply. Face milling head for RDMT 1604 inserts 80 mm diameter for broad contact area Internal coolant for extended tool life Six cutting edges for efficient material removal Efficient cutting performance for repetitive production The milling head is engineered to convert insert geometry into consistent chip removal rates, making it well suited to batch production and tool-change strategies that aim to reduce cycle time. The combination of an 80 mm diameter and six cutting edges provides a balance between surface engagement and feed per tooth, so material removal is distributed evenly across the cutter body. This leads to predictable cutting forces and minimises vibration, contributing to improved process stability and repeatable part quality. Secure clamping and simple maintenance for predictable uptime Clamping is executed via M4x10 screws tightened with a T15 Torx key, giving a repeatable and torsion-resistant connection between insert and cutter body. The use of standardised RDMT 1604 inserts simplifies inventory and replacement logistics, while the mechanical design reduces the risk of insert movement under load. Clear, standardised fasteners and accessible seating mean insert changes are quick and reliable, limiting downtime in busy workshops. Integrated coolant to protect inserts and improve tool life A dedicated internal coolant channel supplies cutting fluid directly to the cutting zone, improving chip evacuation and cooling the cutting edge where thermal loads are highest. The internal coolant reduces built-up edge formation and contributes to more consistent tool wear patterns, which in turn eases tool life monitoring and maintenance planning. For operations where heat management and chip control define process window stability, such a coolant feature is a decisive technical advantage. Compact design for flexible machine-tool integration With an overall length of 50 mm and a measured weight of 0.89 kg, the head is compact and straightforward to integrate into standard milling setups. The relatively short overhang supports higher spindle speeds and minimises deflection, while the mass aids in damping minor vibrations. Compatibility with common mounting diameters ensures the cutter can be introduced without extensive fixturing changes, making it a pragmatic choice for shops seeking to standardise tooling across multiple machines. Contact Metav Werkzeuge for availability of the Teknik Makina T274-1TM face milling head and to discuss suitable RDMT 1604 insert grades for specific materials Technical Data SKU: T274-1TM Manufacturer: Teknik Makina Product type: Face milling head Facts Diameter: 80 mm Overall length: 50 mm Weight: 0.89 kg Number of cutting edges: 6 Shank diameter: 27 mm ECLASS: 21180902 Special features Internal coolant (through-tool) Compatible with RDMT 1604 indexable inserts Torx screw M4x10; Torx key T15 Category: face milling head / plain milling head FAQ What insert type does this milling head accept? The face milling head accepts RDMT 1604 indexable inserts; this standard insert size ensures broad availability and interchangeability. Is the cutter suitable for high-feed operations? With six cutting edges and an 80 mm diameter, the cutter is designed to distribute load and is suitable for higher feed rates within the machine and insert limits of the T274-1TM by Teknik Makina. How is coolant supplied to the cutting edge? Coolant is supplied via an internal channel (through-tool), improving chip control and reducing thermal load at the cutting edge of the RDMT 1604 inserts. Which fasteners are required for insert mounting? Insert clamping uses M4x10 screws tightened with a T15 Torx key, offering a secure and repeatable connection for insert seating. Can this head be used across different machining centres? The compact overall length and standardised shank diameter support integration into a variety of milling machines, subject to spindle and fixture compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from an 80 mm circular face mill tailored for RHKW 1003 indexable inserts with seven cutting edges for sustained throughput and reliable chip evacuation; the 27 mm shank and secure M3.5 clamp screw deliver stable mounting for repeatable results. Order the Rundplattenfräser directly via Metav Werkzeuge or ask our consultants if needed. Rundplattenfräser — 80 mm face mill for RHKW 1003 inserts (Teknik Makina) The Rundplattenfräser is a circular indexable face mill engineered for efficient face and peripheral milling with RHKW 1003 indexable inserts, suitable for industrial and workshop production where fast tool changes and consistent surface finish are required. 80 mm diameter for high material removal rates Accepts RHKW 1003 indexable inserts Seven cutting edges for extended productivity 27 mm shank with M3.5 clamp screw and M4x10 Torx Improve cycle times with high‑efficiency geometry The circular milling head is designed to maximise metal removal while maintaining process stability. With a bold 80 mm cutting diameter and seven cutting edges, the tool reduces the number of passes required, which shortens cycle times and increases output. Using indexable inserts minimises downtime: worn edges are changed quickly without regrinding, while consistent insert seating supports repeatable tolerances. For procurement managers and production engineers this combination translates into measurable throughput gains and predictable tool consumption. Secure clamping and simple servicing for reliable runs Reliable clamping is essential for repeatable results; the cutter features a 27 mm shank and a positive clamping arrangement that includes an M3.5 clamp screw and an M4x10 Torx screw for the insert seat. The supplied Torx key size T15 ensures straightforward torque application during insert changes. These design choices reduce the chance of seating errors, lower vibration and protect insert life — benefits that help maintain surface quality across series production and support lean maintenance routines. Designed for workshop supply and compatibility With an overall length of 50 mm and a mass of 1.08 kg, this circular milling cutter integrates easily into existing tool holders and storage systems while offering robust handling on the machine. It is configured for RHKW 1003 inserts and listed as compatible with Ingersoll insert variants, which provides flexible sourcing options and simplifies logistics. The item is supplied under SKU T608TM, making stock management and reordering straightforward for purchasing teams and toolroom staff. For reliable, high‑throughput face milling choose the Teknik Makina cutter and contact Metav Werkzeuge in Emmerich for tailored advice and stocking options: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: T608TM Manufacturer: Teknik Makina Product name: Rundplattenfräser Designation: for RHKW 1003 Indexable Inserts Core specifications Diameter: 80 mm Number of cutting edges: 7 Overall length: 50 mm Shank diameter: 27 mm Weight: 1.08 kg Special features Compatible inserts: RHKW 1003 Compatible insert manufacturer: Ingersoll Clamp screw: M3.5 Torx screw: M4x10 Torx key size: T15 FAQ Which inserts does this cutter use? The cutter is designed for RHKW 1003 indexable inserts; compatible Ingersoll variants are listed for flexible sourcing. How many cutting edges are available per head? The tool runs with seven cutting edges, which supports higher material removal rates and longer intervals between indexings. What is the shank diameter and how is the insert fixed? The shank is 27 mm and inserts are secured using an M3.5 clamp screw and an M4x10 Torx screw; the Torx key is T15. Is the cutter suitable for existing tool holders? The 27 mm shank and the overall length of 50 mm mean the cutter integrates with standard holders compatible with that shank size; check holder clearance and clamping specs. What is the SKU for reorders and stock management? The article is listed under SKU T608TM for straightforward reordering and inventory control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine efficient material removal with reliable coolant-fed stability: the 80 mm diameter head, its internal coolant and compatibility with RPMT 1204 inserts deliver stable cycle times and consistent surface quality — order the cutter directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. Round indexable milling cutter T713-1TM — 80 mm, internal coolant (for RPMT 1204 indexable inserts) by Teknik Makina The Round indexable milling cutter T713-1TM is a compact face milling head engineered for high-efficiency finishing and roughing operations with RPMT 1204 indexable inserts in production and repair workshops. *80 mm diameter for broad cutting engagement *Internal coolant for reliable chip evacuation *Compatible with RPMT 1204 Korloy inserts *Six cutting edges for consistent surface finish Faster material removal with predictable cycle times The combination of an 80 mm diameter cutting head and six cutting edges raises the material removal rate per revolution while keeping radial engagement balanced. This design reduces the number of passes required for a given stock removal, resulting in shorter cycle times and more predictable throughput on CNC machining centres. The use of standard RPMT‑format inserts simplifies tooling procurement and changeover, maintaining process continuity on the shop floor. Coolant-fed stability for improved surface finish and tool life Built-in internal coolant channels deliver cutting fluid directly to the cutting zone, improving chip evacuation and reducing heat at the insert edge. This targeted cooling lowers flank wear and helps maintain a consistent cutting geometry over longer tool life, so fewer insert changes are needed and surface finish variance is minimised. The coolant-fed design also supports heavier feeds and more aggressive cutting where the machine and component allow. Straightforward integration and reliable handling in production The head features workshop-standard fixing hardware and dimensions for uncomplicated installation and maintenance: 50 mm overall length, balanced mass of 0.584 kg, and secure fixing with T15 Torx seating and M4x8.5 screws. Compatibility with Korloy-specified RPMT 1204 inserts ensures wide availability of grades and geometries for different materials and cutting conditions. Together, these characteristics make the tool a practical choice for job shops and production lines seeking consistent, repeatable milling performance. Contact Metav Werkzeuge for application advice and to reserve the Teknik Makina T713-1TM for your next production batch — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T713-1TM Label: 80mm Rundplattenfräser RPMT 1204 L50mm mit Innenkühlung Manufacturer: Teknik Makina Core specifications Diameter: 80 mm Overall length: 50 mm Weight: 0.584 kg Number of cutting edges: 6 ECLASS: 21180902 Special features Internal coolant: yes Insert type: RPMT 1204 Compatible insert supplier: Korloy Torx key: T15 Torx screw: M4x8.5 Category: Planmesserkopf FAQ Which inserts fit this milling head? The Round indexable milling cutter T713-1TM accepts RPMT 1204 indexable inserts; Korloy grades are specified for compatibility and provide a wide range of chipforms and grades. Does the tool support coolant through the body? Yes. The T713-1TM is equipped with internal coolant channels to improve chip evacuation and edge cooling during milling. How many cutting edges does the cutter provide per revolution? The cutter uses six cutting edges, allowing multiple engagements per revolution for a smoother material removal pattern and improved surface quality. What fixing hardware is required for mounting? The head secures with Torx fastening: a T15 key and M4x8.5 screws are used for insert clamping and replacement. Is the milling head suitable for integration into existing toolholders? With an overall length of 50 mm and standard mounting dimensions, the head is designed for straightforward integration into common face milling setups and toolholders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of high material removal, straightforward insert handling and secure machine clamping for uninterrupted production. The design reduces tool change times and stabilises cutting forces thanks to multiple cutting edges and a compact 27 mm shank. Order the round insert face mill directly via Metav Werkzeuge or ask our consultants if needed. Round Insert Face Mill for RPMW 10T3 Indexable Inserts — 80 mm, 7 cutting edges (Teknik Makina) The Round Insert Face Mill for RPMW 10T3 indexable inserts is engineered for efficient face milling and straightforward integration into industrial machining setups *80 mm cutting diameter *Seven cutting edges for smooth chip flow *Compatible with RPMW 10T3 indexable inserts *27 mm tool shank for secure machine clamping Higher material removal with stable cutting results With an 80 mm cutting diameter and 7 cutting edges, this face mill increases productivity by distributing the cutting load across multiple inserts, which reduces vibration and improves surface finish. The combination of many small cutting engagements and balanced geometry maintains consistent chip evacuation and heat distribution, allowing longer stretch between maintenance intervals. The result is a measurable improvement in effective machining time and a more predictable process window when compared with single-edge alternatives. Quick insert changes and dependable retention The cutter accepts RPMW 10T3 indexable inserts and is compatible with Korloy plate types, enabling broad sourcing options for replacement inserts. Insert retention is provided by M3.5x8.5 screws tightened with a T15 Torx key, a common and reliable fixation method that reduces the risk of cam‑out and ensures repeatable clamping force. Fast, repeatable insert changes mean shorter downtime during tool servicing, while the standard screw and key sizes simplify workshop logistics and spares management. Compact mounting and long-term workshop benefits A 27 mm tool shank and 50 mm overall height enable compact installation in many standard arbor systems and milling holders, delivering high rigidity close to the spindle. The cutter body geometry and multiple cutting edges help to lower per‑edge load, extending insert life and contributing to predictable tool costs over longer production runs. Provided by Teknik Makina, this tool is designed to blend robust mechanical integration with serviceable features that support continuous, economical machining in professional workshops. For reliable face milling solutions from Teknik Makina or for precise technical advice, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and sourcing Technical data SKU: T709TM Name: Round Insert Face Mill for RPMW 10T3 indexable inserts Manufacturer: Teknik Makina eClass: 21180902 ETIM: EC011860 Core technical dimensions Cutting diameter: 80 mm Overall height: 50 mm Number of cutting edges: 7 Shank / mounting diameter: 27 mm Design and special features Compatible insert type: RPMW 10T3 Compatible insert manufacturer: Korloy Fastening screw: M3.5x8.5 Required Torx key: T15 FAQ Which inserts fit this cutter? The cutter is designed for RPMW 10T3 indexable inserts; Korloy‑type RPMW inserts are listed as compatible with the T709TM. How many cutting edges are installed and what is the benefit? The face mill uses seven cutting edges, which spreads the load, reduces vibration and improves surface finish compared with fewer‑edged alternatives. What are the key mounting dimensions? Key dimensions: 80 mm cutting diameter, 50 mm overall height and a 27 mm shank for secure machine clamping; these values indicate integration requirements for holders and arbors. Which screw and key are required for insert replacement? Insert retention uses M3.5x8.5 screws that are tightened with a T15 Torx key, ensuring secure and repeatable fixation. Is the cutter easy to integrate into standard milling setups? The T709TM's 27 mm shank and compact profile permit installation in many standard arbors and holders; final compatibility should be checked against the machine tool’s clamping interface and speed/torque limits. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust mounting, quick indexable‑insert changes and a compact 80 mm cutter diameter for stable, productive milling. Order the component directly via Metav Werkzeuge or consult our specialists for setup recommendations. Rundplattenfräser — indexable insert milling cutter, 80 mm diameter, 6 cutting edges (Teknik Makina) The Rundplattenfräser is a circular indexable insert milling cutter designed for medium‑duty face and peripheral milling tasks using RPMW 1204 indexable inserts. 80 mm diameter for reliable machining Six cutting edges for efficient chip division 27 mm shank for rigid spindle mounting Compatible with RPMW 1204 Korloy inserts, Torx T15 Faster cycle times through optimised cutting geometry The cutter is engineered as an indexable insert milling solution that prioritises productivity. With an 80 mm diameter and six cutting edges, the tool delivers a high effective cutting circumference while keeping individual insert loads moderate; this reduces thermal peaks and extends insert life. Using standard RPMW 1204 inserts means quick, repeatable tool refurbishments: worn faces are returned to service by rotating or replacing inserts rather than regrinding, which shortens downtime and improves overall machine utilisation. These characteristics translate into measurable savings on cycle time for repeated profiling and face‑milling operations. Stable mounting for consistent surface quality A substantial 27 mm shank and a total head height of 50 mm provide a rigid connection to the spindle. The resulting reduction in chatter stabilises the cutting process and supports a predictable surface finish, even at higher feed rates. The balance achieved by the six‑edge arrangement promotes smoother spindle loads and reduces vibration‑induced tolerances. For production environments where repeatability matters, this mechanical stability helps maintain component accuracy across longer runs and reduces the need for rework. Straightforward maintenance and standardised consumables Serviceability is simplified by common fastening hardware: Torx T15 key interface and M4x7 screws ensure familiar workshop procedures. Insert seat geometry accepts KRLY‑type indexable inserts from major suppliers such as Korloy, enabling straightforward stocking of consumables and rapid changeovers. Standard screw and key sizes mean fewer specialised tools at the bench and faster servicing between shifts, which supports uninterrupted throughput and predictable maintenance intervals. Integration into workshop workflows and procurement The tooling is suitable where compact cutters are preferred for closer access or where tool inventory rationalisation is a priority. Compatibility with widely used insert standards reduces inventory complexity and helps procurement teams consolidate suppliers. Metav’s position as a precision partner adds an additional layer of quality assurance: products are sourced and distributed from a central Emmerich facility that acts as a quality filter for the European market, supporting reliable supply and consistent specifications. Contact Metav Werkzeuge for tailored recommendations on integrating the Teknik Makina T713TM cutter into existing setups or to request insertion and balancing guidance — reach our Emmerich team at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: T713TM SKU: T713TM Brand: Teknik Makina Designation (EN): for RPMW 1204 Indexable Inserts Core data Diameter: 80 mm Overall height: 50 mm Number of cutting edges: 6 Shank diameter (D): 27 mm Features Compatible inserts: RPMW 1204 Insert type/form: KRLY Compatible insert manufacturer: Korloy Torx key: T15 Torx screw: M4x7 eClass: 21180902 ETIM: EC011860 FAQ Which insert size fits this cutter? The cutter accepts RPMW 1204 indexable inserts; the seat is specified for KRLY form inserts and is compatible with Korloy RPMW 1204 parts. How many cutting edges are active on the tool? The tool uses six cutting edges arranged around the head to provide balanced chip removal and improved tool life. What fastening hardware is required to secure the inserts? Inserts are secured with M4x7 screws that use a Torx T15 key for mounting and removal. Is the shank suitable for rigid spindle applications? Yes—the 27 mm shank provides a stable connection to the spindle for reduced vibration and consistent results in production use. Can common workshop staff perform insert changes? Insert changes are designed to be straightforward using the Torx interface; standard workshop tools and basic training are sufficient for routine replacement and indexing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust stability, internal coolant and precise insert compatibility for consistent face-milling results; order the Teknik Makina unit directly via Metav Werkzeuge or consult our specialists for application advice. Planmesserkopf — Face milling head with internal coolant, 80 mm diameter (Teknik Makina) The Planmesserkopf is a compact face milling head designed for ONMU 0505 indexable inserts and short-reach face-milling operations where coolant-fed cutting and secure clamping are required. Internal coolant for improved chip evacuation and tool life 80 mm diameter for efficient face coverage Compatible with ONMU 0505 ISCAR indexable inserts Secure fixation with M5x12 Torx screws Faster metal removal with stable 80 mm diameter performance The compact face milling head delivers a high workrate through its 80 mm diameter and a 45° cutting geometry that balances cutting forces and surface finish. The configuration with seven cutting positions reduces vibration during interrupted cuts and increases material removal rates on flat surfaces. This translates into shorter cycle times on facing operations while maintaining repeatable dimensional accuracy, especially in medium-duty production runs. Secure clamping and service-friendly mechanics for uptime A robust clamping concept using M5x12 Torx screws (Torx key T20) ensures repeatable seat integrity for every insert change. The head accepts ONMU 0505 indexable inserts from ISCAR, enabling straightforward replacement and predictable cutting performance. The internal coolant channel supports directed cooling to the cutting edge, which reduces thermal wear and prolongs insert life — a practical advantage in continuous shift work and in tougher material mixes. Industrial-grade design that supports workshop reliability Constructed for demanding shop-floor conditions, the cutter head’s mass (approx. 1.202 kg) and compact 50 mm overall length give the assembly rigidity without excessive projection, lowering bending moments and improving tool life. The result is a stable cutter that suits repetitive facing tasks and provides consistent surface quality. The compatibility with established indexable inserts simplifies inventory: standard ONMU 0505 inserts can be stocked for multiple machine setups. Straightforward integration and maintenance planning Installation and service require only common workshop tools thanks to the Torx interface and standard screw dimensions. The internal coolant connection reduces the need for secondary coolant routing modifications while improving chip control at the cutting edge. For process planners, this cutter head offers an uncomplicated exchange routine and predictable maintenance intervals, aiding production planning and reducing unplanned downtime. Order the Teknik Makina face milling head with internal coolant via Metav Werkzeuge in Emmerich to benefit from central European supply and application advice; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations. Technical data Article number: T796-1TM Label: 80 mm face milling head for ONMU 0505 indexable inserts, L50 mm, internal coolant Product type: Face milling head eClass: 21181015 Manufacturer: Teknik Makina Key figures Diameter: 80 mm Overall length: 50 mm Shank diameter: 27 mm Weight: 1.202 kg Cutting angle: 45° Number of cutters: 7 Features & compatibility Internal coolant Compatible with ONMU 0505 indexable inserts Suitable for ISCAR inserts Torx screw: M5x12 Torx key: T20 FAQ What insert type does this face milling head accept? The face milling head is configured for ONMU 0505 indexable inserts; compatible inserts from ISCAR provide standardised performance and easy replacement. Is the tool suitable for coolant-through operation? Yes — the cutter head features internal coolant, supplying lubricant and cooling directly to the cutting zone to improve insert life and chip control. Which screw and key are required for insert replacement? Insert and seat fixation use M5x12 Torx screws tightened with a T20 Torx key for secure, repeatable clamping. What benefits does the 45° cutting angle provide? A 45° approach reduces radial cutting loads while improving surface finish and distributing wear across the insert, which helps prolong service intervals. Can this head be used on short overhang setups? The compact 50 mm overall length and 1.202 kg mass make the head well suited to short overhang configurations, increasing stiffness and dimensional stability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of an 80 mm diameter cutting face, six cutting edges and a secure 27 mm shank for steady, repeatable face milling. Order the face milling head directly via Metav Werkzeuge or ask our consultants if needed. Face milling head T419TM – 80 mm diameter, for HNGX 0906 indexable inserts (Teknik Makina) A face milling head engineered for efficient face milling and finishing operations using HNGX 0906 indexable inserts. *80 mm diameter for broad contact area *Six cutting edges for smooth surface finish *Compatible with HNGX 0906 indexable inserts *27 mm shank diameter for secure mounting Greater contact area for consistent surface quality With an 80 mm cutting face and six cutting edges, this cutter head increases the engagement area per pass, which helps to produce a more uniform finish on the workpiece. The larger contact diameter reduces the need for multiple overlapping passes, improving throughput while maintaining surface integrity. The design suits medium‑duty face milling applications where surface consistency and operational steadiness influence the overall production quality. Fast, dependable insert changes and secure clamping The milling head accepts HNGX 0906 indexable inserts and is compatible with Pramet insert geometries, which simplifies logistics when standardising tooling across machines. Insert retention uses M4.5x11 Torx screws; a T15 key is required for tightening. This fastening approach delivers reliable clamping force with predictable torque behaviour, so changeovers are quick and repeatable and tool runout is minimised — essential when repeat accuracy matters on batch production. Cutting geometry that lowers forces and improves finish The cutter’s 55° cutting angle is chosen to balance cutting force and chip formation. A steeper approach angle disperses load across multiple inserts, reducing vibration and allowing each edge to deliver a cleaner cut. For users unfamiliar with cutter geometry: this means lower stress on the holder and toolbody, improved tool life for the inserts and a better first‑pass surface — particularly useful when finishing cast or machined faces where appearance and dimensional control are needed. Robust mounting and workshop compatibility Engineered with a 27 mm shank diameter and an overall length of 50 mm, the tool body offers secure mounting in standard toolholders while keeping the setup compact. The unit weight of 1.067 kg contributes to a stable rotary mass that resists chatter during interrupted cuts. Supplied compatibility with widely used insert formats and established fasteners ensures the head integrates easily into existing tooling systems and maintenance routines, supporting predictable production uptime. For availability, tooling advice or to arrange a volume supply, contact Metav Werkzeuge in Emmerich — our specialists will advise on setup and compatibility for your application Technical data Article number: T419TM Manufacturer: Teknik Makina Product: Face milling head (Planmesserkopf) For indexable inserts: HNGX 0906 Facts Diameter: 80 mm Overall length: 50 mm Shank diameter (mount): 27 mm Weight: 1.067 kg Cutting angle: 55° Number of cutting edges: 6 Special features Compatible with Pramet inserts Torx screw M4.5x11 for insert clamping Torx key size T15 required Designed for HNGX 0906 indexable inserts Brand association: Teknik Cutting Tools FAQ What insert type does this cutter head accept? The cutter head accepts HNGX 0906 indexable inserts; it is specified for that insert format and aligns with Pramet geometries. Which screw and key are needed for clamping the inserts? Insert clamping uses M4.5x11 Torx screws and requires a T15 Torx key for correct tightening. What benefits does the 55° cutting angle provide? A 55° cutting angle reduces peak cutting forces and improves chip flow, helping to achieve a smoother finish and longer insert life in typical face milling operations. Is the shank size suitable for standard holders? The tool uses a 27 mm shank diameter, which is compatible with standard toolholders designed for that dimension and offers stable mounting for moderate cutting loads. What is the SKU and who manufactures the tool? The SKU is T419TM and the item is supplied by Teknik Makina (Teknik Cutting Tools) as specified in the product data. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine broad coverage and insert flexibility with the 80 mm diameter, compatibility with RDMT 1204 indexable inserts and seven cutting edges for steady material removal. Order the cutter directly via Metav Werkzeuge or consult our specialists for application advice. Round Face Milling Cutter T144TM — 80 mm diameter, for RDMT 1204 Indexable Inserts (Teknik Makina) A Round Face Milling Cutter engineered for efficient face milling using RDMT 1204 indexable inserts, ideal for general shop and production use. 80 mm diameter for broad coverage Accepts RDMT 1204 indexable inserts Seven cutting edges for efficient removal Compact 50 mm overall length for tight setups Maximised productivity with an insert-based system The combination of RDMT 1204 compatibility and an indexable design allows for rapid insert changes and consistent cutting geometry, reducing downtime and improving cycle times. By accepting standard indexable inserts, the toolhead supports predictable tool life and simplified inventory management. The result is a measurable improvement in throughput while maintaining surface quality across a range of face milling tasks. Secure clamping and balanced stability for reliable cuts Clamping integrity is ensured by a dedicated fixing system that uses a T15 Torx key and M3.5x8.5 screws, providing repeatable torque and secure insert retention. The tool’s mass—0.925 kg—and compact profile contribute to stable running at typical cutting conditions, lowering vibration and enabling consistent chip formation. These attributes translate into fewer edge failures and more consistent component tolerances. Compact design for flexible workshop integration With an 80 mm diameter and an overall length of 50 mm, the milling head is dimensioned to fit confined fixtures and multi-axis turrets while still offering substantial cutting engagement. The seven cutting edges increase effective cutting cycles between indexings, which supports sustained material removal rates in batch production. Built for compatibility with standard face-milling setups, the head integrates easily into existing tool chains without the need for extensive adaptation. For procurement guidance or technical clarification on Teknik Cutting Tools' 80 mm round face milling cutter (SKU T144TM), contact Metav Werkzeuge for tailored advice and dependable supply from Emmerich. Technical Data SKU: T144TM Label: 80mm Rundplattenfräser RDMT 1204 L50mm Product type: Rundplattenfräser Manufacturer: Teknik Makina eCl@ss: 21180902 Facts Diameter: 80 mm Overall length: 50 mm Weight: 0.925 kg Cutting edges: 7 Shank diameter: 27 mm Special features Compatible with RDMT 1204 indexable inserts Torx screw M3.5x8.5 Torx key T15 Category: Planmesserkopf FAQ Which insert type is required for this milling head? The milling head uses RDMT 1204 indexable inserts; the cutter (SKU T144TM) is configured to accept that insert family for straightforward replacement and indexing. How many effective cutting edges are available between indexings? The toolholder features seven cutting edges distributed across the head, extending productive machining time before insert changes are necessary. Is the head suitable for compact machine turrets? Yes. The compact overall length of 50 mm and 80 mm diameter make the cutter appropriate for constrained setups and multi-axis turrets in standard shop environments. What fastening hardware is specified for insert retention? Insert retention uses a T15 Torx key with M3.5x8.5 screws to ensure consistent clamping torque and secure seating of inserts. Can this cutter be used with existing indexable insert stocks? If RDMT 1204 inserts are already stocked, the cutter (Teknik Makina, SKU T144TM) integrates directly; compatibility reduces the need for additional insert varieties. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of an 80 mm cutting diameter and internal coolant for steady face milling and improved insert lifetime; compatibility with RDMT 12T3 indexable inserts keeps tooling costs predictable. Order the cutter via Metav Werkzeuge or consult the specialists for application-specific recommendations. Rundplattenfräser (Indexable Insert Face Mill) – 80 mm, internal coolant by Teknik Makina The Rundplattenfräser is an indexable insert face milling head designed for efficient material removal in general machining and shop-floor milling applications where stability and coolant-fed cutting are required 80 mm diameter for broad material engagement Internal coolant for improved chip control Compatible with RDMT 12T3 indexable inserts Six cutting edges for steady material removal rates High removal rates with consistent surface quality The 80 mm cutter body, paired with six cutting edges, delivers balanced cutting forces and stable chip loads for face milling operations. By spreading the cutting action across multiple edges, the tool reduces vibration and helps maintain a reliable surface finish while enabling higher feed rates. The body geometry is optimised for repeatable chip formation, which translates into predictable cycle times and a reduced need for secondary finishing. The overall result is a tool that supports productivity gains on batch and single-part runs alike. Coolant-fed design to extend insert life and reduce thermal loads The integrated internal coolant supply directs cutting fluid close to the cutting edge, improving heat dissipation and aiding chip evacuation. This focused coolant flow reduces thermal wear on the insert grade and decreases the risk of built-up edge, extending effective tool life and stabilising cutting performance. For operations that push feed or depth limits, the coolant-fed design helps preserve cutting geometry and minimises unplanned changeovers, supporting a more consistent production output. Fast insert changes and standardised clamping for less downtime Designed for RDMT 12T3 indexable inserts, the milling head accepts established insert geometries for a wide choice of grades and chipbreaker options. The clamping uses a T15 Torx key interface and M3.5x8.5 Torx screw fixation, enabling secure seating and quick, repeatable insert replacement. This standardisation lowers inventory complexity and simplifies maintenance routines on the shop floor, reducing downtime during insert rotations and set-up procedures. Compact dimensions and straightforward workshop integration With a total length of 50 mm and a mass of 0.925 kg, the cutter balances rigidity with compact installation space requirements. The design suits many milling spindles and modular toolholding arrangements, making it straightforward to integrate into existing tool sets. Supplied under SKU T286-2TM, the component from Teknik Makina combines a pragmatic form factor with serviceable features, supporting a seamless transition into production processes without extensive fixture changes. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina T286-2TM face mill with internal coolant, available from our Emmerich centre. Technical data Article number: T286-2TM Label: 80mm Rundplattenfräser RDMT 12T3 L50mm mit Innenkühlung ECLASS: 21180902 Product type: Rundplattenfräser Manufacturer: Teknik Makina Facts Diameter: 80 mm Total length: 50 mm Weight: 0.925 kg Cutting edges: 6 Special features Internal coolant Compatible with RDMT 12T3 indexable inserts Torx key: T15 Torx screw: M3.5x8.5 SKU: T286-2TM FAQ What insert type does this face mill use? The cutter is designed for RDMT 12T3 indexable inserts, allowing selection of grades and chipbreakers suited to the workpiece material. Does the tool provide internal coolant supply? Yes, the milling head features internal coolant, which improves chip evacuation and helps extend insert life. Which fastening hardware is required for insert replacement? Insert clamping uses a T15 Torx interface and M3.5x8.5 Torx screws for secure and repeatable replacement. What are the key dimensions to check for machine compatibility? Relevant dimensions are the 80 mm diameter and 50 mm total length; mass is 0.925 kg—use these when verifying spindle clearance and toolholder suitability. Is the T286-2TM suitable for high-feed face milling? The combination of six cutting edges and internal coolant supports stable cutting at elevated feeds; select inserts and machining parameters appropriate to the material and machine rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com