Gibt es einen Hahn und Kolb Online Shop?

Reliable left-hand clamping holder with SVJCL 2020 ISO designation, a 20 mm shank and 125 mm overall length for secure VCMT insert clamping; order the clamping holder directly via Metav Werkzeuge or ask our consultants if needed. SVJC for VCMT Indexable Inserts — SVJCL 2020 clamping holder, left-hand, 20 mm shank (Teknik Makina) SVJC for VCMT Indexable Inserts is a left-hand clamping holder designed for precision turning operations with VCMT 1103 indexable inserts, offering stable clamping and consistent cutting geometry suitable for production and trade environments SVJCL 2020 ISO designation Left-hand geometry for back turning Compatible with VCMT 1103 inserts Robust 20 mm shank, 125 mm overall length Stable clamping for consistent turning results The SVJC clamping system is engineered to deliver secure insert retention, reducing chatter and improving surface finish. With a cutting height of 33 mm and a cutting angle of 93°, the holder establishes the correct geometry for radial and axial engagement when used with VCMT 1103 inserts. The design concentrates on mechanical stability: the clamping arrangement and shank dimensions are specified to maintain repeatability across batches, which translates into fewer re-setups and more predictable tool life. The modest mass of 0.378 kg helps preserve spindle balance while providing sufficient rigidity for medium-duty turning operations. Designed for workshop efficiency and simple integration The toolholder’s 125 mm overall length and 20 mm shank width make it compatible with common turret and post holders, enabling quick changeovers in small and mid-sized lathes. The left-hand orientation suits rear‑facing and back‑turning applications where cut direction demands a left‑hand geometry. The ISO designation SVJCL 2020 supports straightforward procurement and replacement planning in inventories, while the compact head width of 25 mm keeps overhang to a minimum. These measurable specifications ease integration into existing tool sets and support a streamlined workflow that prioritises uptime and predictable production rates. Built for durability and reliable sourcing Manufactured by a specialist supplier, the holder is produced to machining tolerances that favour longevity under regular use. The combination of a standardised SVJCL 2020 configuration and compatibility with widely used VCMT inserts ensures access to replacement parts and inserts across suppliers. For procurement and technical support, partnering with Metav Werkzeuge brings the advantage of a consolidated supply chain and an experienced distributor that acts as a quality filter for the European market. This alignment supports consistent availability and dependable after-sales guidance for workshop managers and purchasing specialists. For tailored advice on the SVJC clamping holder from Teknik Makina and to arrange specification checks or procurement, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data SKU: D386TM Manufacturer: Teknik Makina Model designation: SVJCL 2020 Product name (EN): SVJC for VCMT Indexable Inserts Dimensions & Key Data Overall length: 125 mm Shank height: 20 mm Holder width: 20 mm Cutting-head width: 25 mm Cutting height: 33 mm Cutting angle: 93° Weight: 0.378 kg Compatibility & Features Suitable for VCMT 1103 indexable inserts Left-hand cutting direction Designed for turning and back-turning operations ISO-compliant holder designation FAQ Which inserts fit this holder? The SVJC for VCMT indexable inserts accepts VCMT 1103 inserts; the clamping geometry is optimised for this insert form. Is the holder left- or right-hand? This clamping holder is a left-hand version, suitable for back-turning and left-direction cutting tasks. What are the key dimensions to check for fitment? Important dimensions include the 20 mm shank height, 125 mm overall length and 25 mm cutting-head width to ensure compatibility with turret fixtures. What is the ISO designation of the toolholder? The holder carries the SVJCL 2020 ISO designation for standardised referencing and procurement. How heavy is the holder and why does that matter? Weight is 0.378 kg; a compact mass helps maintain spindle balance while providing sufficient rigidity for stable machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining the secure DWLNR 2020 toolholder geometry with a 95° cutting angle and direct compatibility with WN-- 0604 indexable inserts delivers repeatable clamping and predictable cutting performance; the 125 mm overall length and solid 0.436 kg mass improve stability in turning operations. Order the holder directly via Metav Werkzeuge or consult Metav's specialists for fitment guidance. DWLNR 2020 clamping holder — DWLN for WN-- indexable inserts, right-hand, 95° cutting angle (Teknik Cutting Tools) A DWLNR 2020 clamping holder designed for right-hand turning applications, suited to WN-- 0604 indexable inserts and engineered to provide stable, repeatable tool positioning in production turning environments Right-hand tool with 95° cutting angle For WN-- 0604 indexable inserts 125 mm overall length; solid 0.436 kg mass Stable clamping for consistent turning precision The toolholder's geometry prioritises rigid clamping and repeatability to reduce setup variability and scrap rates. With an ISO designation DWLNR 2020 and direct fit for WN-- 0604 inserts, the holder provides defined seat locations and axial support, which translates into stable cutting conditions and consistent surface finish. The combination of a 95° cutting angle and a compact head width helps control cutting forces in right-hand turning, lowering vibration and improving tool life. These technical characteristics support efficient batch production where repeatability and predictable tool behaviour are essential. Designed for seamless integration in machining centres Built to integrate with common turning tool assemblies, this clamping holder features an overall length of 125 mm and a head width of 25 mm, offering a balance between accessibility and rigidity. The cutting height of 26 mm and holder dimensions (20 mm width/20 mm height) are specified to match typical fixture setups, which simplifies tool changeovers and reduces alignment effort. The designation of the shank as K06 (where applicable) supports standard mounting interfaces. By focusing on mechanical stability and dimensional clarity, the holder enables higher feed and depth settings within the limits of the chosen insert, improving cycle times without compromising process reliability. Proven supply and technical backing from Metav Sourcing this toolholder through Metav aligns technical quality with dependable supply. Metav positions itself as a precision partner with a broad range of products and an operational base in Emmerich that acts as a quality filter for the European market. With a long-standing customer base and a comprehensive product portfolio, Metav supports consistent availability and straightforward procurement for workshops and production planners. The holder's simple compatibility with WN-- 0604 inserts and its clearly stated dimensions make it straightforward to specify for procurement lists and machine tool setups. Request availability and technical integration advice for the Teknik Cutting Tools DWLNR 2020 clamping holder from Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com for tailored assistance and delivery options Technical data SKU: D177TM Manufacturer: Teknik Makina ISO designation: DWLNR 2020 For indexable inserts: WN-- 0604 Dimensions & weight Overall length: 125 mm Head width: 25 mm Holder width: 20 mm Holder height: 20 mm Cutting height: 26 mm Cutting angle: 95° Mass: 0.436 kg Cutting direction: right Compatibility & features Suited for: right-hand turning Fits inserts: WN-- 0604 Shank designation: K06 Tool family: DWLN for WN-- indexable inserts FAQ What insert sizes are compatible with this toolholder? The DWLNR 2020 clamping holder is compatible with WN-- 0604 indexable inserts as specified, providing a direct seat for that insert geometry. Is the holder suitable for right-hand turning only? Yes, the toolholder is designed for right cutting direction and is intended for right-hand turning applications. What are the key dimensions to check for machine compatibility? Key dimensions include overall length 125 mm, head width 25 mm, holder width 20 mm, holder height 20 mm, and cutting height 26 mm; these determine mounting clearance and reach. Does the product include a shank designation? The holder lists a shank designation of K06, which can be used to confirm mounting compatibility with the lathe or turret interface. What is the mass of the holder and how does that affect stability? The mass is 0.436 kg; the holder's weight combined with its geometry contributes to mechanical stability and reduced vibration during cutting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise, repeatable left‑hand turning with the robust clamping geometry and standard ISO fit; the secure insert seating and 125 mm overall length support stable, vibration‑reduced machining. Order or consult Metav Werkzeuge for advice and supply. Clamping holder D322TM — MWLNL 2020 left‑hand toolholder, 125 mm (Teknik Makina) The Clamping holder D322TM is a left‑hand turning toolholder for WN-- 0804 indexable inserts, engineered to deliver secure insert clamping and reliable performance in turning applications. Left‑hand turning orientation Compatible with WN-- 0804 inserts ISO MWLNL 2020 designation 125 mm overall length 35 mm cutting height Stable clamping for consistent turning results The holder’s clamping design ensures repeatable seating of WN-- 0804 indexable inserts, which reduces micro‑movement at the cutting edge and improves surface finish. With an effective 95° approach angle and a purpose‑shaped head, the assembly promotes controlled chip flow and lowers the risk of chatter during left‑hand turning. For shops that value predictable cycle times, the combination of standardised insert compatibility and solid clamping contributes directly to process stability and fewer rework cycles. Optimised geometry and mechanical rigidity for productivity Dimensioned with a 125 mm overall length, a 35 mm cutting height and a compact head width of 25 mm, this toolholder balances reach and stiffness. The 20 mm holder height and a mass of 0.435 kg provide sufficient inertia to resist deflection in common turning tasks while remaining manageable at tool change. The ISO designation MWLNL 2020 reflects a standard geometry that enables straightforward set‑up and consistent tool projection, which together reduce set‑up time and support higher throughput on series parts. Compatibility that simplifies workshop logistics Designed for standard WN-- 0804 inserts and referenced as MWLN for WN-- Indexable Inserts in technical specifications, the holder fits common insert families and simplifies stock management. The left‑hand cut orientation is clearly marked and the accessory designation K08 indicates the compatible bar or adaptor reference for mounting. By using a holder that adheres to ISO geometry, procurement and tool replacement become more efficient, reducing downtime and making the holder a practical choice for both manual lathes and CNC turning centres. For reliable left‑hand turning with Teknik Cutting Tools’ precision holders, contact Metav Werkzeuge for technical guidance and prompt supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: D322TM Manufacturer: Teknik Makina Product: Clamping holder Designation (EN): MWLN for WN-- Indexable Inserts Dimensions & performance Overall length: 125 mm Holder height: 20 mm Head width: 25 mm Holder width: 20 mm Cutting height: 35 mm Cutting angle: 95° Weight: 0.435 kg Compatibility & features ISO designation: MWLNL 2020 Compatible inserts: WN-- 0804 Cut direction: left‑hand Bar/adapter reference: K08 FAQ Which inserts fit this holder? The D322TM clamping holder accepts WN-- 0804 indexable inserts; the ISO geometry (MWLNL 2020) ensures compatibility with standard WN insert families. Is the holder suitable for left‑hand turning only? Yes, the toolholder is designed for left‑hand cutting direction and is marked for left‑hand turning operations. What are the critical dimensions for set‑up? Key dimensions: overall length 125 mm, cutting height 35 mm and head width 25 mm; these values define projection and clamping requirements for bench or turret mounting. How does the ISO designation help in workshop management? The ISO designation MWLNL 2020 standardises geometry, simplifying reorder processes and ensuring interchangeability across compatible inserts and toolholders Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of stable clamping, broad insert compatibility and compact dimensions for reliable turning operations; order the clamp holder directly via Metav Werkzeuge or consult our specialists for application advice. PCLN Clamp Holder for CNMG Indexable Inserts — Teknik Makina PCLNL 2020, left-hand, 125 mm The PCLN clamp holder provides a left-hand turning solution for workshops and production lines, designed specifically for the secure use of CNMG 1204 indexable inserts in general machining and finishing applications. PCLNL 2020 ISO designation Compatible with CNMG 1204 inserts Left-hand cutting orientation 125 mm overall length Consistent clamping for predictable turning performance The PCLN clamp holder delivers a secure clamping geometry that stabilises the insert during cutting, reducing vibration and promoting repeatable surface quality. With a 95° cutting angle and a 30 mm cutting height, the toolholder aligns insert geometry precisely for predictable chip flow and reduced tool chatter. The holder body dimensions — 20 mm height, 25 mm head width and 20 mm shank width — are optimised to combine rigidity with compact envelope, enabling access in confined setups while maintaining cutting stability across standard turning cycles. Broad compatibility that reduces tool change complexity Designed for use with CNMG 1204 indexable inserts, the clamp holder supports widely available insert formats to simplify stocking and reduce machine downtime. The ISO designation PCLNL 2020 indicates a standardised interface for cartridge-style clamping, while the bar designation K12 identifies the compatible tool shank. The left-hand configuration suits counter-directional turning operations and is particularly useful where combined toolsets require mirrored holders. Using common inserts improves logistical efficiency and allows quick regrips or tool changes without special adapters. Workshop-ready build for reliable daily use Engineered for everyday production environments, the holder’s 125 mm overall length and modest mass (0.421 kg) deliver a balance between reach and low centrifugal load on the turret. The clamp mechanism secures inserts firmly, so replacement is straightforward while maintaining the repeatability of the cutting edge position. Material and coating data are not specified; however, the mechanical dimensions and ISO conformity make the unit straightforward to integrate into existing tool programmes and fixture layouts. The product supports efficient setup routines and consistent part tolerances across serial runs. Discuss specific machine fitment and order through Metav Werkzeuge — Metav’s consultants provide tailored advice from Emmerich to ensure the right toolholder choice for each turning application Technical data Article number: P140TM Manufacturer: Teknik Makina Core dimensions & mass Overall length: 125 mm Cutting height: 30 mm Holder height: 20 mm Head width: 25 mm Shank width: 20 mm Weight: 0.421 kg Cutting angle: 95° Cutting direction: left Compatibility & designation Suitable for CNMG 1204 indexable inserts ISO designation: PCLNL 2020 Bar designation: K12 Application: turning / clamping for indexable inserts FAQ What insert type does this holder accept? The clamp holder is specified for CNMG 1204 indexable inserts and is designed to maintain the correct cutting geometry for that insert format. Is this holder for left- or right-hand turning? This toolholder is a left-hand configuration, suitable for counter-directional turning operations. What are the key dimensions to check for turret compatibility? Important dimensions are the overall length (125 mm), holder height (20 mm), head width (25 mm) and shank width (20 mm); verify turret clearance and toolpath before installation. How does the PCLNL 2020 designation affect interchangeability? The PCLNL 2020 ISO designation standardises the interface and clamping style, which helps with interchangeability and ensures consistent insert positioning across compatible holders. Can this holder be used with other CNMG sizes? The holder is specified for CNMG 1204; using other sizes may change cutting geometry and is not recommended without verification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact holder that combines precise insert compatibility, controlled coolant delivery and a short overall length for easier tool set-up; the result is steady turning performance and predictable chip control. Order the clamping holder directly via Metav Werkzeuge or consult their specialists for application-specific guidance. PWLN for WNMG Indexable Inserts — Teknik Makina PWLNR 2020 clamping holder, right‑hand, internal coolant The PWLN for WNMG Indexable Inserts is a right‑hand clamping holder designed for secure mounting of WNMG 0604 inserts in general turning applications, offering internal coolant and a compact 125 mm overall length. Right‑hand clamping for turning operations Internal coolant for reliable tool performance Compatible with WNMG 0604 indexable inserts Cutting height 30 mm and 95° cutting angle Steady clamping for repeatable turning quality The holder provides secure clamping through a robust ISO‑designated seat (PWLNR 2020) and a dedicated TH617 clamping screw, ensuring consistent insert positioning during interrupted cuts and continuous turning. Consistent insert seating reduces vibration-related wear and supports repeatable component tolerances; this contributes directly to process reliability on both short and long production runs. Assembly and replacement routines are simplified by standardised components, keeping machine downtime to a minimum while maintaining geometric stability. Controlled coolant and improved chip evacuation Equipped with internal coolant, the tool delivers cutting fluid close to the cutting edge to manage heat and help evacuate chips efficiently. The provision of directed coolant reduces thermal distortion of the cutting edge and prolongs insert life when machining steels and common alloys. Combined with the 95° cutting angle, the coolant path supports stable cutting conditions, which frequently translates into higher feed rates and longer tool life under comparable cutting parameters. Compact dimensions for versatile machine set‑ups At an overall length of 125 mm and a weight of 0.415 kg, the holder balances reach and rigidity for confined toolposts and turret pockets. The cutting height of 30 mm and head dimensions (head width 25 mm, holder width 20 mm, holder height 20 mm) enable straightforward alignment with existing tool lines and reduce the need for time‑consuming adapter changes. Compatibility with common indexable inserts is achieved without sacrificing the stiffness required for stable turning, making it suitable for batch work and flexible job shop environments. Practical components for fast maintenance The system uses standard fitments—TA021 shim plate, TS3 dowel pin, TL3 lock lever and a 2.5 mm Allen key for routine operations—so replacement parts and maintenance actions are quick and repeatable. The holder accepts the K06‑IKG1/8 drill‑rod designation for secure shank engagement. These standardised parts reduce the variety of spares required in the tool crib and support predictable service intervals, helping to streamline workshop logistics and sustain throughput. For robust right‑hand turning with Teknik Makina PWLNR 2020 clamping holders and tailored technical advice, contact Metav Werkzeuge — Metav Werkzeuge supplies from Emmerich and can advise on insert compatibility, set‑up and delivery options Technical Data SKU: AP160TM Item: PWLN for WNMG Indexable Inserts Manufacturer: Teknik Makina Core specifications Overall length: 125 mm Cutting height: 30 mm Holder height: 20 mm Head width: 25 mm Holder width: 20 mm Cutting angle: 95° Weight: 0.415 kg Materials & features Compatible inserts: WNMG 0604 Clamping screw: TH617 Shim plate: TA021 Dowel pin: TS3 Lock lever: TL3 Allen key size: 2.5 mm ISO designation: PWLNR 2020 Shank drill rod: K06‑IKG1/8 Cut direction: right Internal coolant: yes FAQ What inserts fit this clamping holder? The holder is designed for WNMG 0604 indexable inserts and will seat the insert securely when used with the ISO‑specified PWLNR 2020 configuration (Teknik Makina, SKU AP160TM). Is the holder suitable for right‑hand turning only? Yes, the tool is manufactured for right‑hand cutting direction and is specified as a right‑hand PWLN clamping holder from Teknik Makina. Does the tool support internal coolant? Internal coolant is provided to the cutting zone, supporting temperature control and chip evacuation for improved insert life and process stability. Which components are supplied for assembly and maintenance? Standard service items include the TH617 clamping screw, TA021 shim plate, TS3 dowel pin and the TL3 lock lever; an Allen key of 2.5 mm is required for routine tightening. What are the main dimensional constraints for setup? Key dimensions are an overall length of 125 mm, a cutting height of 30 mm and head/holder widths of 25 mm and 20 mm respectively, which should be checked against turret pocket and toolpost clearances. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust clamping, proven compatibility with CCMT inserts and a compact, service-friendly design to keep turning operations consistent and predictable. Order the Klemmhalter SCLC for CCMT Indexable Inserts directly via Metav Werkzeuge or ask our consultants if needed. Klemmhalter — SCLC for CCMT Indexable Inserts, right-hand (SCLCR 2020) by Teknik Makina A Klemmhalter configured as an SCLC tool holder for turning with CCMT indexable inserts, engineered for right-hand cutting in general workshop and light industrial turning applications. Rigid SCLC clamping design Compatible with CCMT 09T3 inserts Right-hand cutting orientation ISO SCLCR 2020 shank profile Consistent clamping for repeatable turning quality The SCLC holder delivers rigid clamping and stable tool support to reduce vibration and maintain a constant cutting geometry across series production. The SCLC design is particularly effective where repeatability matters: the 95° cutting angle and defined seating ensure that insert positioning is consistent part to part. This translates into fewer setup checks, less scrap and a more reliable output when machining common turning tasks. Proven insert compatibility and precise geometry Designed for CCMT-type inserts, the holder accepts CCMT 09T3 plates and secures them with a compact, serviceable clamping interface. The shank reference SCLCR 2020 and carrier designation K09 define a familiar mounting and orientation for workshop tooling systems. The combination of 25 mm cutting head width and 25 mm cutting height supports standard insert geometries while the right-hand cut direction suits conventional lathe turning routines, enabling straightforward integration into existing toolsets. Practical dimensions and workshop advantages With an overall length of 125 mm and a mass of 0.425 kg, the holder balances accessibility and stiffness for medium-reach turning. The modest 20 mm body width and 20 mm height allow close-in operations on compact workpieces, while the robust clamping keeps insert seating secure during interrupted cuts. The compact design eases storage and tool change routines, supporting efficient shop workflows and predictable tool life. For operations requiring verification or specification matching, technical details are straightforward to compare and validate against machining plans. For workshop procurement and technical guidance on Teknik Makina SCLC clamping holders, contact Metav Werkzeuge for tailored advice and supply options via info@metav-werkzeuge.com or call +49 2822 7131930 — orders and consultations handled from Emmerich with European logistics reliability Technical data Article number: D402TM Manufacturer: Teknik Makina Product name: Klemmhalter — SCLC for CCMT Indexable Inserts SKU: D402TM Facts Weight: 0.425 kg Overall length: 125 mm Cutting head width: 25 mm Cutting height: 25 mm Holder width: 20 mm Holder height: 20 mm Cutting angle: 95° Special features Suitable for CC-- 09T3 inserts ISO designation: SCLCR 2020 Shank designation: K09 Right-hand cutting direction Compact clamping interface Robust clamping design FAQ What inserts fit this clamping holder? The Klemmhalter (SCLC for CCMT indexable inserts, SKU D402TM) accepts CCMT 09T3 style inserts and is intended for the corresponding chipbreaker geometries. Is the holder suitable for right-hand turning only? Yes, the SCLC tool holder is configured for right-hand cutting; its geometry and clamping orientation support conventional right-hand lathe operations. What are the key dimensions to check for toolpost clearance? Check the overall length (125 mm), holder width (20 mm) and holder height (20 mm) to ensure compatibility with the toolpost and turret clearances in the intended machine setup. How does the SCLCR 2020 profile affect mounting? The ISO SCLCR 2020 shank profile provides a standard reference for positioning and repeatable seating, simplifying replacement and integration into established tooling systems. Can this holder withstand interrupted cuts and moderate depths of cut? The holder’s rigid clamping and compact mass (0.425 kg) make it suitable for typical turning operations, including intermittent cutting, when used with appropriate insert grades and machining parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Choose the combination of precise compatibility with CCMT 09T3 inserts, a compact 20 mm head and the recognised SCLCR 2020 designation for stable, repeatable right‑hand turning. Order the clamping holder directly via Metav Werkzeuge or consult the Metav specialists for configuration assistance. Klemmhalter SCLC for CCMT Indexable Inserts — SCLCR 2020 Right‑hand Turning Holder (Teknik Makina) The Klemmhalter SCLC for CCMT Indexable Inserts is a right‑hand turning holder tailored for CCMT 09T3 inserts, engineered for compact external turning and reliable clamping in workshop and production environments. Right‑hand configuration for turning Compatible with CCMT 09T3 inserts 20 mm head and shank width ISO SCLCR 2020 designation Predictable machining performance through proven insert compatibility The holder is designed around the widely used CCMT 09T3 indexable insert, which ensures consistent chip control and predictable surface finish when paired with appropriate grades. With a 95° cutting angle and a right‑hand orientation, the assembly promotes stable cutting forces and reduced chatter. For users less familiar with insert geometry: indexable inserts permit rapid replacement without regrinding, so cycle time is minimised and process stability is enhanced. The SCLCR 2020 designation indicates the holder geometry and clamping arrangement, which is compatible with common lathe toolposts and simplifies tool inventory planning. Compact dimensions for flexible fixturing and short overhangs A modest head height and widths of 20 mm combine with an overall length of 125 mm to reduce unsupported overhang and improve rigidity in confined setups. The reduced mass—approximately 0.426 kg—lowers centrifugal load at higher spindle speeds and contributes to steadier cutting conditions. For operations where space and accessibility are critical, the compact form factor enables closer toolholder placement and more effective multiple‑tool arrangements. The result is less vibration, longer insert life and more consistent part quality. Robust integration and straightforward workshop adaptation Supplied under the Teknik Makina designation and carrying the ISO SCLCR 2020 code, this toolholder suits standard turning applications where CCMT inserts are preferred. The shank is identified as K09‑F, which aligns the holder with common mounting options and simplifies replacement across compatible toolposts. Assembly and changeover are supported by the familiar clamping concept of indexable insert holders, so downtime for tool changes is reduced. For buyers seeking a dependable, easy‑to‑manage turning solution, this holder delivers practical interchangeability and fast return to production. Contact Metav Werkzeuge today for bespoke advice on configuring Teknik Cutting Tools' SCLC holders — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance and product availability. Technical data Article number (SKU): D430TM Manufacturer: Teknik Makina Product designation: SCLC for CCMT Indexable Inserts ISO designation: SCLCR 2020 Cutting direction: right Core specifications Head height: 20 mm Head / cutting‑head width: 20 mm Holder width: 20 mm Overall length: 125 mm Weight: 0.426 kg Cutting angle: 95° Compatible inserts: CCMT 09T3 Special features Compatible with CCMT 09T3 indexable inserts Shank designation: K09‑F Right‑hand turning holder ISO SCLCR 2020 designation SKU: D430TM Brand: Teknik Makina FAQ Which inserts are compatible with this holder? The holder accepts CCMT 09T3 indexable inserts; the assembly is engineered to provide secure clamping and repeatable positioning for that insert format. Is the toolholder suitable for right‑hand or left‑hand turning? This model is a right‑hand turning holder, designed and specified as such under the ISO SCLCR 2020 code for correct cutting orientation. What are the main dimensions to check for fixture compatibility? Key dimensions include a head height and width of 20 mm, an overall length of 125 mm and a weight of 0.426 kg; these determine rigidity and fit in the toolpost. Which shank designation is provided for mounting? The holder is listed with the K09‑F shank designation, which should be matched to the corresponding toolpost or quick‑change block. What cutting angle does the holder provide and what is the intended application? The toolholder features a 95° cutting angle and is intended for external turning operations using CCMT 09T3 inserts with repeatable clamping and straightforward insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a right-hand SCLC clamping holder that combines a compact 125 mm overall length with a secure design for CCMT inserts; order directly via Metav Werkzeuge or consult the Metav team for application support. Klemmhalter — SCLC for CCMT Indexable Inserts (SCLCR 2020, right-hand, 95°) The Klemmhalter SCLC for CCMT Indexable Inserts is a right-hand clamping holder for external turning applications, built for use with CC--1204 indexable inserts and engineered for repeatable, rigid clamping. Right-hand orientation for standard turning ISO SCLCR 2020 designation Compatible with CC--1204 indexable inserts 125 mm overall length, compact design Stable engagement for repeatable cuts The holder offers a 95° cutting angle and an ISO SCLCR 2020 form factor, delivering stable engagement during turning operations and a predictable balance of radial and axial loads. The compact 125 mm overall length and a mass of 0.421 kg ensure reduced overhang and improved vibration resistance compared with longer tools, which supports consistent surface finish and dimensional accuracy in serial production. For machining planners and toolroom managers this translates into fewer setup corrections and more predictable cycle times. Broad compatibility that reduces tooling complexity Designed specifically for CC--1204 indexable inserts, the clamping device accepts widely available standard inserts for fast replacement and inventory simplicity. The 25 mm cutting head width, 20 mm holder width and 25 mm cutting height are matched to common insert geometries, enabling straightforward integration into existing tool families and minimising the need for special adapters. Where productivity and uptime matter, compatibility with standard inserts helps to reduce procurement complexity and keeps maintenance operations efficient. Compact robustness for workshops and CNC centres The SCLC-style clamping holder is intended for demanding external turning tasks where secure clamping and repeatability are essential. The right-hand orientation is optimised for conventional turning directions and the robust clamping concept promotes secure insert retention under varying cutting conditions. Toolroom and production engineers will value the combination of compact dimensions and mechanical stability, which supports reliable, repeatable performance on lathes and CNC turning centres without excessive overhang or unnecessary tool changes. Contact Metav Werkzeuge for a tailored recommendation on Teknik Makina clamping holders and application guidance; reach the Metav team at info@metav-werkzeuge.com or +49 2822 7131930 to confirm fitment and availability Technical Data Article number: D418TM Manufacturer: Teknik Makina SKU: D418TM Designation ISO: SCLCR 2020 Suitable for inserts: CC--1204 Brand: Teknik Makina Core dimensions Overall length: 125 mm Cutting head width: 25 mm Holder width: 20 mm Cutting height: 25 mm Cutting angle: 95° Weight: 0.421 kg Features Right-hand cutting direction For CCMT indexable inserts Compact SCLC clamping configuration Suitable for external turning applications ISO-based toolholder form FAQ Which inserts fit this clamping holder? The Klemmhalter SCLC for CCMT Indexable Inserts accepts CC--1204 indexable inserts; compatibility is based on the CCMT insert form and the SCLCR 2020 holder geometry. Is the holder right-hand or left-hand? This toolholder is manufactured as a right-hand holder, designed for standard right-hand turning operations. What are the key dimensions to check for machine integration? Key dimensions are 125 mm overall length, 25 mm cutting head width, 20 mm holder width and 25 mm cutting height; these determine clearance and overhang in the machine setup. What is the ISO designation and why is it relevant? The ISO designation SCLCR 2020 identifies the holder form and clamping style, ensuring compatibility with tooling systems and simplifying selection for standard turning programmes. Which applications is this holder best suited for? The Klemmhalter SCLC for CCMT Indexable Inserts is best suited for external turning tasks in workshop and production environments where a compact, rigid holder is required for repeatable results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust clamping solution with a 20 x 20 mm clamping profile, compatibility with 22 ER inserts and a 125 mm overall length for stable external-thread turning; order directly via Metav Werkzeuge or request advice from our consultants. Clamp holder D265TM (AL 2020) – for outside thread, compatible with 22 ER inserts, 20 x 20 mm The Clamp holder D265TM is a right-hand clamping tool designed for external-thread turning in industrial lathe and turning-centre applications, offering a compact 20 x 20 mm profile for secure insert seating. 20 x 20 mm clamping profile Compatible with 22 ER inserts 125 mm overall length for stability Right-hand cutting direction Precise clamping to reduce rework and cycle time The clamping solution delivers repeatable positioning by combining a defined clamping profile with standard insert compatibility. Designed for use with 22 ER turnable inserts, the holder stabilises the cutting edge and reduces micro‑vibration, which in turn lowers the risk of tool chatter and the need for rework. The compact 20 x 20 mm block ensures a secure grip while keeping tool overhang low, so cycle times remain efficient without compromising component quality. For shops aiming to increase throughput, this means fewer rejects and more consistent batch output. Sturdy construction for consistent shop-floor performance With an overall length of 125 mm and a mass of 0.46 kg, the clamping tool strikes a balance between rigidity and manageable weight. The defined cutting‑head width and cutting height contribute to a stable contact surface for inserts, minimising deflection under load. The inclusion of a Torx M4x11 fastening screw ensures secure clamp tightening and straightforward maintenance. As a consequence, setups remain consistent across multiple shifts and operators, supporting production reliability and predictable machining results. Easy integration with common turning systems The holder is supplied in the AL 2020 clamping profile and is compatible with the K22-ER22 tool shank designation, simplifying retrofit into existing tool posts and turret stations. Compatibility with standard ER22 insert systems reduces the need for special tooling inventories and shortens changeover times. The right-hand cutting direction fits standard threading operations, and the universal mounting concept means the holder can be adopted across a range of turning centres without bespoke adaptation, helping to reduce downtime during tooling changes. Applications and workshop suitability Intended for industrial turning environments, the clamp holder suits shops that require reliable external-thread forming and finishing on conventional lathes and CNC turning centres. The robust design supports repetitive tasks and frequent insert changes, making it suitable for medium to high-volume production runs. By focusing on a compact, standardised interface and proven fastening methods, the holder delivers a pragmatic solution for workshops seeking to streamline tooling logistics and maintain steady output quality. Contact Metav Werkzeuge for tailored technical advice or to reserve the Teknik Makina clamp holder from our Emmerich stock, ensuring rapid supply and expert guidance for integration into production. Technical Data SKU: D265TM Model designation: AL 2020 Type: Clamp holder for outside thread Brand: Teknik Makina Torx screw: M4x11 Core technical data Overall length: 125 mm Weight: 0.46 kg Clamping width: 20 mm Clamping height: 20 mm Cutting head width: 20 mm Cutting height: 30 mm Special features Compatible with 22 ER inserts Compatible with K22-ER22 tool shanks Right-hand cutting direction AL 2020 clamping profile FAQ Which insert type fits this holder? The clamp holder accepts 22 ER turnable inserts; the design supports standard ER22 insert geometry for external-thread applications. Is the holder suitable for left-hand threading? This item is produced with a right-hand cutting direction; left-hand applications require a corresponding left-hand holder variant. What is the fastening method for the insert clamp? A Torx M4x11 screw secures the clamp, providing reliable tightening and easy replacement procedures. Can the holder be mounted in standard tool posts? The AL 2020 profile and compatibility with K22-ER22 shanks allow integration into common tool posts and turret stations without special adapters. How does the holder improve thread quality? By reducing overhang and stabilising the insert via the defined 20 x 20 mm clamping surface, the holder lowers vibration and helps maintain a consistent cutting geometry for cleaner thread profiles. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, ISO‑designated tool holder that secures RCMT 1204 indexable inserts with consistent cutting height and straightforward compatibility; procure the holder via Metav Werkzeuge or consult our advisors for application guidance. Klemmhalter SRDCN 2020 — Tool holder for RCMT 1204 indexable inserts, neutral cutting The Klemmhalter SRDCN 2020 is a compact turning tool holder for RCMT 1204 indexable inserts, designed for neutral cutting tasks in confined machining setups. Compatible with RCMT 1204 indexable inserts ISO designation SRDCN 2020 Cutting height 38 mm for correct geometry Compact 125 mm length for confined turning Consistent clamping for repeatable turning results The SRDCN design delivers consistent clamping and repeatable tool geometry, which supports predictable machining outcomes. Built to the SRDCN 2020 ISO designation, the holder matches the seat and locating features of RCMT 1204 indexable inserts so that insert positioning and tool angles remain stable part-to-part. The specified cutting height 38 mm ensures the insert sits at the intended centreline, reducing setup adjustments and minimising the need for trial cuts. These attributes translate into shorter setup time and improved first-pass accuracy on production turns. Compact form factor that enhances access and rigidity A compact overall length of 125 mm combined with a modest head width of 10 mm and a holder width of 20 mm provides access into tighter bores and close‑spaced fixtures while maintaining sufficient support. The moderate mass (approx. 0.372 kg) contributes to a stable assembly without excessive overhang, helping to reduce chatter during conventional turning operations. The shank designation K12 indicates the connection interface for compatible tool posts and adapters, enabling straightforward integration into existing tool stations and standard turret fittings. Neutral cutting orientation and workshop continuity Specified for neutral cutting, this holder is suitable for general turning tasks where side‑specific geometries are not required, simplifying inventory and tool planning. As part of the Teknik Makina range, the component is designed for pragmatic workshop deployment, offering straightforward insert changes and predictable performance in repetitive operations. Backed by Metav Werkzeuge’s distribution and quality filtering, the holder benefits from reliable supply channels and product selection processes that support continuous production with minimal administrative overhead. For reliable compatibility with RCMT 1204 inserts and assistance selecting the correct mounting for a specific lathe or turret, contact Metav Werkzeuge — the precision partner for workshops: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: D276TM Designation: Klemmhalter SRDCN 2020 Manufacturer: Teknik Makina Eclass: 21181004 Facts Total length: 125 mm Cutting height: 38 mm Holder height: 20 mm Holder width: 20 mm Cutting head width: 10 mm Weight: 0.372 kg Cutting direction: neutral Special features ISO designation SRDCN 2020 Shank designation K12 For RCMT 1204 indexable inserts Compact geometry for confined turning FAQ What inserts are compatible with this holder? The Klemmhalter SRDCN 2020 accepts RCMT 1204 indexable inserts and is designed to match the seat geometry and locating features of that insert type. Which dimensions determine installation and reach? Key dimensions are total length 125 mm, cutting height 38 mm, holder width 20 mm and head width 10 mm; the weight is approximately 0.372 kg. Is the holder suitable for left‑ or right‑hand turning? The holder is specified for neutral cutting, making it suitable for standard turning applications without a side‑specific geometry requirement. How is the holder mounted to typical tool posts? The shank designation K12 indicates the interface type for mounting; compatibility with a given tool post depends on matching the shank and adapter standards. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid design with precise 30° cutting geometry and broad compatibility with RCMT 10T3 indexable inserts for consistent turning results; order the clamping holder directly via Metav Werkzeuge or ask our consultants if needed. SRGCR 2020 clamping holder — SRGC for RCMT indexable inserts, right-hand, Teknik Makina The SRGCR 2020 clamping holder is a right-hand turning toolholder engineered for stable, repeatable operations with RCMT 10T3 indexable inserts, offering a compact shank and a short overall length for minimal overhang. Precise 30° cutting angle for stable cuts Compatible with RCMT 10T3 inserts 20 x 20 mm shank for standard toolposts 125 mm overall length for rigid support Predictable cutting performance through rigid geometry The holder's 30° cutting angle and compact dimensions deliver a predictable cutting direction and improved chip control, reducing chatter in many turning scenarios. With a 20 x 20 mm shank and a 125 mm overall length, the assembly keeps overhang low and stiffness high, which translates into more consistent surface finish and longer insert life. The modest weight of 0.41 kg eases handling during changeovers while maintaining the mass needed to dampen vibrations. Wide insert compatibility to reduce tooling complexity Designed specifically for RCMT 10T3 indexable inserts and carrying the ISO designation SRGCR 2020, the holder supports established insert geometry and grades, enabling straightforward stocking strategies and quick reconditioning of tool rooms. The SRGC clamping concept secures the insert reliably, allowing economical use of indexable cutters and predictable tool life—benefits that add up in repetitive production environments and support lean tooling management. Faster set-up and straightforward integration into workshops The toolholder's 25 mm head width and 25 mm cutting-edge height match common lathe setups, so insertion height and toolpost fittings are easier to align. The unit's right-hand orientation and clear ISO marking simplify selection at the workstation, cutting set-up time and minimising adjustment iterations. Where operators rotate between jobs, the consistent geometry reduces set-up errors and supports quicker changeovers across similar machining tasks. Practical application: where this holder adds value This clamping holder is suited to deterministic turning operations where RCMT-style inserts are preferred for facing, light turning and semi-finishing work. The combination of ISO-standard form, compact shank and robust clamping geometry delivers a practical balance of rigidity, compatibility and ease of use. For workshops seeking to rationalise tooling while maintaining flexibility, this holder provides a dependable component to standardise on. Contact Metav Werkzeuge for Teknik Makina SRGCR 2020 holders and expert advice on RCMT compatibility and workshop supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: D284TM Manufacturer: Teknik Makina Article designation ISO: SRGCR 2020 Product: SRGC for RCMT Indexable Inserts Suitable for inserts: RCMT 10T3 Cut direction: right Core technical data Overall length: 125 mm Shank width: 20 mm Shank height: 20 mm Head width: 25 mm Cutting edge height: 25 mm Cutting angle: 30° Weight: 0.41 kg Special features ISO designation SRGCR 2020 K10 shank designation Right-hand orientation Compatible with RCMT 10T3 inserts SRGC clamping geometry FAQ Which inserts fit this holder? The holder accepts RCMT 10T3 indexable inserts; it is configured specifically for the SRGC clamping geometry to match those insert dimensions. Is the toolholder right- or left-hand? This turning toolholder is a right-hand orientation, suitable for conventional right-hand turning operations. What are the shank dimensions and overall length? Shank dimensions are 20 x 20 mm and the overall length is 125 mm, offering a compact footprint for improved rigidity. What is the ISO designation for this holder? The ISO designation is SRGCR 2020, which identifies the holder form and helps ensure correct matching with inserts and toolposts. Can this holder reduce set-up time in a multi-operator workshop? Yes—consistent geometry, ISO marking and compatibility with RCMT inserts make set-up and tool changes faster and more repeatable across operators. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of secure, repeatable clamping and integrated coolant delivery to keep cycle times stable and tool life predictable; order the clamping holder directly via Metav Werkzeuge or consult our specialists for application-specific advice. Clamping holder — SVJB for VBMT indexable inserts, right‑hand with internal coolant by Teknik Makina The Clamping holder is a right‑hand turning toolholder for VBMT 1604 indexable inserts, offering internal coolant supply and a compact cutting head for reliable medium‑duty turning applications. Right‑hand holder with internal coolant Designed for VBMT 1604 indexable inserts Cutting head 25 mm × 20 mm for rigid support Torx M3.5×11 clamp screw and T15 key included Precision and stability for repeatable turning results A machined, compact clamping solution delivers predictable performance on short to medium overhangs. The holder’s cutting head 25 mm × 20 mm and rigid clamping geometry reduce chatter and maintain insert position under load, which supports tighter tolerances and fewer reworks. The cutting angle 93° is optimised for secure engagement of VBMT‑style inserts and helps distribute cutting forces evenly; this results in more consistent surface finish and less vibration across batch runs. Clear mechanical seating and the SVJBR 2020 ISO designation simplify insert orientation and replacement, cutting setup time in the workshop. Faster cycle times through targeted cooling and tool management Integrated internal coolant channels direct lubricant to the cutting edge, decreasing built‑up edge and improving chip control for interrupted or continuous cuts. That targeted cooling extends insert life and supports higher material removal rates without sacrificing finish quality. The toolholder is specified for VBMT 1604 inserts and fits standard back‑plate arrangements such as TA034, enabling straightforward retrofitting into existing tool posts. As a result, process engineers benefit from an improved cost‑per‑component ratio and predictable tool change intervals — essential for lean machining and small‑batch production environments. Workshop friendly design for maintenance and integration Routine service and exchange are simplified by standard fastenings: a Torx M3.5×11 clamp screw and T15 key are used for secure locking and rapid insert swaps. With an overall length of 125 mm and a low mass of 0.192 kg, the holder minimises inertia on the turret while remaining robust enough for medium turning tasks. The supplied parts and ISO‑compatible bore references assist maintenance teams in stocking the correct spare components. Documentation of the clamping interface and the K16‑IK boring‑bar reference supports interchangeability across machines, reducing downtime and improving workshop throughput. For application advice on the Teknik Makina clamping holder with internal coolant, contact Metav Werkzeuge to discuss machine compatibility and delivery from our Emmerich stock. Technical Data Article number: AP545TM Manufacturer: Teknik Makina Product: Clamping holder SVJB for VBMT indexable inserts (right‑hand) Data Holder height: 20 mm Holder width: 20 mm Cutting head width: 25 mm Cutting height: 40 mm Overall length: 125 mm Weight: 0.192 kg Cutting angle: 93° Clamp screw: M3.5×11 Torx key: T15 Special features Internal coolant Right‑hand orientation For VBMT 1604 indexable inserts ISO designation SVJBR 2020 Compatible with U‑plate TA034 Boring‑bar reference K16‑IK FAQ What insert type is this holder designed for? The clamping holder is specified for VBMT 1604 indexable inserts and uses the SVJBR 2020 seating for correct orientation and clamping. Does the holder provide internal coolant? Yes, the holder features internal coolant channels to deliver cutting fluid directly to the tool tip for improved chip control and tool life. Which fasteners are required for insert clamping? Clamping is secured with a Torx M3.5×11 screw; a T15 key is used for tightening and loosening. Is the clamping holder right‑hand or left‑hand? This model is a right‑hand turning holder, optimised for conventional toolpost arrangement on lathes. What are the physical dimensions and weight of the holder? The holder measures 125 mm in overall length, has a cutting head 25 mm × 20 mm, holder height 20 mm, and weighs 0.192 kg. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a secure clamping system, internal coolant and precise compatibility with CNMG 1204 inserts for consistent turning performance; order directly via Metav Werkzeuge or consult our specialists for application advice. Klemmhalter PCLN for CNMG Indexable Inserts — Right-hand turning holder with internal coolant (PCLNR 2020) by Teknik Makina The Klemmhalter PCLN for CNMG Indexable Inserts is a right-hand turning holder engineered for external turning with CNMG 1204 inserts; it combines secure clamping and coolant feed to support reliable production runs Right-hand turning holder for CNMG 1204 Internal coolant for improved chip evacuation ISO designation PCLNR 2020 for standardised fit 125 mm overall length with 28 mm cutting height Consistent clamping for repeatable turning results The holder's ISO designation PCLNR 2020 signifies a standardised fit and makes insert changes straightforward. The PCLN-style clamp secures CNMG 1204 indexable inserts via a robust clamp screw (TH821) together with the matching U‑plate (TA016-1) and locating pin (TS-4), which ensures repeatable seating and reduces set-up time. This precise clamping reduces insert micro-movement under cutting forces, translating into stable tool life and fewer interruptions during batch production. Cooler cutting and improved surface finishes Built-in internal coolant supplies coolant directly to the cutting zone, helping to control temperature and evacuate chips more effectively. By reducing thermal load and swarf contact at the cutting edge, the holder can extend insert life and promote a more consistent surface finish on turned components. For operations that prioritise cycle-time reliability and dimensional repeatability, the coolant provision supports higher feeds and steady metal removal rates without sacrificing quality. Compact, rigid design for versatile turning operations With an overall length of 125 mm, a cutting height of 28 mm and a cutting head width of 25 mm, the toolholder balances reach and rigidity for general external turning tasks. The holder's right-hand orientation and a specified cutting angle of 95° make it suitable for facing and general-purpose turning where access and clearance are factors. Weighing 0.428 kg, the tool is easy to handle during mounting yet substantial enough to damp vibrations, supporting precise machining results across small to medium batches. Discuss application requirements with Metav Werkzeuge—our specialists can advise on the PCLN holder, mounting components and compatible CNMG 1204 inserts; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: AP130TM Manufacturer: Teknik Makina Facts Holder height: 20 mm Cutting head width: 25 mm Holder width: 20 mm Cutting height: 28 mm Overall length: 125 mm Weight: 0.428 kg Cutting angle: 95° Internal coolant: yes Special features ISO designation: PCLNR 2020 Suitable for: CNMG 1204 inserts Cutting direction: right Clamp screw: TH821 U‑plate: TA016-1 Locating pin: TS-4 Knee lever: TL4 Allen key: 3 Allen FAQ Is this holder compatible with CNMG 1204 inserts? The PCLN holder is designed for CNMG 1204 indexable inserts and secures them in the standard PCLNR 2020 seat. Does the holder provide coolant to the insert? Yes, the turning holder features internal coolant, supplying fluid to the cutting zone for improved chip control and temperature management. Which cutting direction is supported by the holder? This toolholder is specified for right-hand turning operations. What mounting components are included or required? The design pairs with the TH821 clamp screw, TA016-1 U‑plate and TS-4 locating pin; the knee lever is TL4 and an Allen key (3 Allen) is referenced for assembly. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust compatibility, a wide 125 mm working diameter and a defined 100° cutting angle for reliable, high-throughput facing operations; order this facing head directly via Metav Werkzeuge or consult our specialists for integration advice. Facing head T705TM — Teknik Makina for 100° ENMX 0905 indexable inserts, 125 mm diameter The Facing head T705TM is a precision-engineered facing tool intended for industrial turning and finishing where ENMX 0905 indexable inserts are specified 100° cutting angle for efficient facing Compatible with ENMX 0905 inserts (YG-1) 125 mm diameter for broad surface coverage 40 mm shank bore for secure mounting Consistent high-removal capacity with stable surface results The T705TM facing head combines a 125 mm diameter with a 100° cutting angle and twelve cutting edges to deliver steady material removal on large-diameter faces. The geometry favours a balance between chip control and surface finish: a wider diameter increases the contact area for uniform passes, while the defined cutting angle helps moderate cutting forces and reduce chatter. In practice, this means fewer passes and a more predictable cycle time for batch production, improving throughput without sacrificing the finished surface quality. Secure insert mounting and reduced setup variability Designed for the common ENMX 0905 indexable inserts and compatible with YG-1 grades, the unit employs a Torx retention system (Torx T10 with M3.5x8.5 screws) to ensure consistent clamping force and repeatability. The 40 mm mounting bore delivers rigid connection to standard toolholders, lowering vibration and improving dimensional stability. For users unfamiliar with insert nomenclature: ENMX 0905 denotes the insert shape and size, while the supplier code (YG-1) identifies preferred grades; matching both ensures optimum wear behaviour and life. Workshop-ready design that integrates with existing setups With an overall height of 63 mm and a shank-ready diameter suitable for common toolposts, this facing solution is engineered for straightforward integration into production lines. The modular insert concept reduces downtime — worn edges are indexed or replaced rather than regrinding — and the head’s configuration supports routine maintenance with standard Torx tooling. The combination of replaceable cutting edges and a robust body yields predictable lifecycle costs and supports planned preventive maintenance schedules in industrial workshops. For a reliable upgrade to facing performance, contact Metav Werkzeuge for tailored advice on Teknik Makina tooling and to arrange supply of the T705TM through our Emmerich facility Technical data Article number: T705TM Manufacturer: Teknik Cutting Tools ECLASS: 21181015 Facts Diameter: 125 mm Overall height: 63 mm Shank bore / holder diameter: 40 mm Cutting angle: 100° Cutting edges: 12 Torx key: T10 Torx screw: M3.5x8.5 Special features Suitable for ENMX 0905 indexable inserts Compatible with YG-1 insert grades Facing head design for industrial turning and finishing Brand: Teknik Makina FAQ What insert type is required for this facing head? The facing head requires ENMX 0905 indexable inserts; YG-1 grades are listed as compatible for typical facing applications. How is the insert secured in the tool? Inserts are clamped using a Torx system (Torx T10) with M3.5x8.5 screws to provide repeatable and secure fastening. Which holder or shank diameter fits this head? The tool is designed for a 40 mm shank bore / holder diameter to ensure a rigid mount in standard toolholders. Can this head be used for roughing and finishing passes? Yes — the 100° cutting angle and twelve cutting edges support high-removal roughing followed by controlled finishing passes when the appropriate insert grade is selected. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from stable, high‑quality face milling thanks to a robust cutter head with a 125 mm diameter and eight cutting edges that shorten cycle times and reduce indexing frequency. Order the face milling head via Metav Werkzeuge or consult the advisors for application-specific guidance. Face milling head T421TM – 125 mm diameter, 8 cutting edges (for HNGX 0906 indexable inserts) by Teknik Makina The Face milling head T421TM is a compact cutter head engineered for efficient surface machining with HNGX 0906 indexable inserts, intended for production and jobbing environments requiring predictable surface finish and rapid insert changes 125 mm diameter for broad surface coverage Eight cutting edges for stable material removal 55° cutting angle for consistent chip formation 40 mm shank for secure toolholding Higher output through consistent cutting geometry The large 125 mm diameter combined with eight cutting edges allows for increased table feed per revolution while maintaining a uniform cut pattern. The 55° cutting angle reduces impact on the tool and helps smooth chip flow, which frequently leads to a more consistent surface finish and fewer rework passes. This geometry is particularly effective where surface evenness and repeatability are required, enabling a measurable improvement in process stability without modifying downstream processes. Faster set-up and secure clamping reduce downtime A rigid 40 mm shank provides reliable toolholding in standard toolholders, while the fastening system uses M4.5x11 Torx screws tightened with a T15 key for straightforward maintenance and repeatable torque application. Compatibility with HNGX 0906 indexable inserts simplifies logistics by allowing use of commonly stocked insert types. Together these details shorten tool change and service intervals, improving overall equipment effectiveness in busy workshops. Designed for repeatability and easy handling With an overall length of 63 mm and a mass of 3.314 kg, the cutter head balances compactness with sufficient mass to dampen vibration during operations that demand steady engagement. The construction supports reproducible indexing of inserts and straightforward replacement procedures, which helps reduce variability between shifts and operators. The product is identified as T421TM, facilitating clear documentation within tooling lists and procurement systems. Straightforward integration with existing tooling systems The head accepts indexable inserts in the HNGX 0906 format and is listed as compatible with insert manufacturer Pramet, enabling integration into established tooling families and allowing workshops to continue using preferred insert grades. The combination of a standardised insert form and conventional screw sizes keeps the number of special tools and spare parts low, simplifying inventory and supply-chain planning while maintaining machining performance. For advice on integrating the Teknik Makina face milling head (T421TM) into production, contact Metav Werkzeuge in Emmerich for prompt, expert support. Technical data Article number: T421TM Product: Face milling head for HNGX 0906 indexable inserts Manufacturer: Teknik Makina Key dimensions Diameter: 125 mm Cutting edges: 8 Overall length: 63 mm Shank diameter (clamping): 40 mm Weight: 3.314 kg Cutting angle: 55° Special features Compatible with HNGX 0906 indexable inserts Compatible insert manufacturer: Pramet Torx screw: M4.5x11 Torx key size: T15 Suitable for standard toolholders with 40 mm clamping FAQ Which insert format is required for this milling head? The face milling head requires HNGX 0906 indexable inserts; this is the designated insert format for the T421TM cutter head. Is the head compatible with Pramet inserts? Yes, the cutter head has been specified to be compatible with inserts from Pramet in the HNGX 0906 format. What fastening hardware is used for the inserts? The inserts are secured using M4.5x11 Torx screws; a T15 Torx key is recommended for tightening and service. What shank size is required in the toolholder? The head has a 40 mm shank diameter for clamping in appropriately rated toolholders. How is the T421TM identified in ordering and documentation? The cutter head is listed under SKU T421TM, which should be used for procurement and internal tooling records. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of a Ø125 mm head and eight cutting edges that deliver consistent material removal and improved surface finish; the secure 40 mm shank ensures stable toolholding under load. Order the face milling head directly via Metav Werkzeuge or consult the Metav specialists for integration advice. Face milling head T786TM — Face milling head by Teknik Makina (Ø125 mm, 8 cutting edges) The Face milling head T786TM is a heavy-duty cutter head designed for high-efficiency face milling with ONMX 0806 indexable inserts in industrial CNC applications. Ø125 mm head diameter Compatible with ONMX 0806 inserts Eight cutting edges for high removal rates 40 mm shank for secure toolholding Stable clamping and vibration reduction for consistent finishes The cutter head has a 40 mm shank and a substantial mass of 3.574 kg, which together increase inertia and reduce chatter during machining. This results in a more consistent surface finish and fewer toolmarks, especially when removing material across wide faces. Operators and planners will notice improved repeatability on long runs, as the stable mounting reduces the need for frequent readjustment and rework. Higher throughput through multiple cutting edges and geometry Equipped with eight cutting edges and a Ø125 mm head, the tool is optimised for efficient face milling where material removal rate matters. The 45° cutting angle balances entry forces and chip formation to allow smoother engagement with the workpiece, delivering steady metal removal while lowering peak loads on each insert. The result is higher productivity per tool change and predictable machining cycles for production planning. Flexible insert sourcing and straightforward maintenance The head is supplied for ONMX 0806 indexable inserts and is compatible with inserts from ISCAR, Korloy, LMN and YG-1, simplifying supply-chain choices and reducing procurement friction. Insert retention uses a M5x12 Torx screw and a T20 key, enabling rapid replacement and minimal downtime. This compatibility supports a pragmatic maintenance routine: quick insert swaps and standardised fastening tools keep machines running with minimal interruption. Built for workshop integration and reliable operation With a compact overall length of 63 mm and a design that supports balanced cutting across its Ø125 mm diameter, the milling head integrates easily into existing toolholders and machine setups that accept a 40 mm shank. The combination of balanced geometry and indexable inserts means less tool inventory complexity while maintaining high-quality face milling and reduced cycle time. For production environments seeking predictable performance, this design offers a pragmatic route to improved throughput. Contact Metav Werkzeuge today to specify the Teknik Makina face milling head T786TM for your production line; Metav’s specialists will advise on holder compatibility and delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T786TM Manufacturer: Teknik Makina Description: Face milling head for ONMX 0806 Indexable Inserts Torx screw: M5x12 Torx key: T20 Facts Shank diameter: 40 mm Head diameter: 125 mm Overall length: 63 mm Weight: 3.574 kg Number of cutting edges: 8 Cutting angle: 45° Special features Compatible inserts: ONMX 0806 Compatible manufacturers: ISCAR, Korloy, LMN, YG-1 Fastening: Torx screw M5x12, Torx key T20 FAQ Which inserts are suitable for this milling head? The face milling head T786TM is designed for ONMX 0806 indexable inserts and accepts inserts from ISCAR, Korloy, LMN and YG-1, allowing flexible sourcing for the cutter head by Teknik Makina (SKU T786TM). What holder or shank size is required for installation? Installation requires a toolholder that accepts a 40 mm shank; the 40 mm shank ensures secure clamping and stable operation for the Teknik Makina face milling head T786TM. How many cutting edges and what head diameter does it have? The cutter features eight cutting edges and a 125 mm head diameter, a combination that provides high material removal capacity for face milling tasks with the T786TM. Which screw and key are needed to change the inserts? Insert retention uses an M5x12 Torx screw and requires a T20 Torx key for safe and easy replacement on the Teknik Makina head (T786TM). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from high-capacity planing with a 125 mm diameter head, 8 cutting edges and a precise 45° cutting angle; the 40 mm shank secures stable mounting and consistent surface finish. Order the planing cutter head directly via Metav Werkzeuge or consult the team for application-specific advice. Planing cutter head T568TM — 125 mm, for SEET 12T3 R245 indexable inserts (Teknik Makina) Planing cutter head T568TM designed for heavy-duty face and planing operations using SEET R245 12T3 indexable inserts, suitable for a wide range of production environments Compatible with SEET R245 12T3 inserts 125 mm diameter for broad coverage Eight cutting edges for continuous machining 40 mm shank for secure tool-holding Consistent surface finish from a rigid, high-capacity design The robust construction of this cutter head delivers a reliable machining platform: the 125 mm diameter provides broad contact area for efficient planing, while the 40 mm shank reduces vibration and improves runout stability. With 8 cutting edges, tool life is spread across multiple cuts, lowering downtime for indexable insert changes. These mechanical choices result in predictable component surfaces and fewer rework cycles, which is advantageous for batch production and repeatable processes. Fast insert replacement and straightforward compatibility Compatibility with SEET R245 12T3 indexable inserts simplifies logistics and speeds tool changes. The tool accepts inserts from established manufacturers such as Sandvik, XTC and ZCC, supporting common supply chains in industrial workshops. Fixing hardware is standardised — M3.5x11 Torx screws and M5x7 hex screws are employed, with assembly and removal aided by a T15 Torx key and U plate TA052 — enabling efficient maintenance routines and consistent clamping forces for repeatable cutting results. Stable mounting and predictable handling for demanding operations Measured handling values support use in heavier setups: the cutter head weighs 3.39 kg and has a compact overall length of 63 mm, yielding a solid centre of mass and restrained overhang. The 45° cutting angle balances shearing action and chip control for planing and facing operations, reducing edge wear on inserts and improving surface integrity. The combination of these specifications promotes a lower risk of chatter and delivers higher-quality finishes on a range of commonly machined materials. Engineered for workshop flexibility and production reliability This cutter head suits machining environments where changeovers and uptime matter. The designed interface and standard fastenings align with existing tool-holding practices, so line integration is straightforward. Compatibility with multiple insert brands, together with the tool’s geometric choices, supports both one-off and serial production tasks. As a product from Teknik Makina, the unit prioritises durable construction and practical serviceability to maintain output consistency over long production runs. Discuss the cutter head application with Metav Werkzeuge or request a technical drawing to verify fitment and insertion strategy — Metav Werkzeuge provides product expertise and supply from Emmerich. Technical Data Article number: T568TM Product name: Planing cutter head for SEET 12T3 R245 Manufacturer: Teknik Makina Dimensions & Core Data Diameter: 125 mm Cutting edges: 8 Overall length: 63 mm Weight: 3.39 kg Shank diameter: 40 mm Cutting angle: 45° Special features Compatible inserts: SEET R245 12T3 Compatible manufacturers: Sandvik, XTC, ZCC Screws: M3.5x11 (Torx), M5x7 (Hex) Torx key size: T15 U plate: TA052 FAQ What inserts does this cutter head accept? The planing cutter head T568TM accepts SEET R245 12T3 indexable inserts and is compatible with inserts from Sandvik, XTC and ZCC. Which shank diameter is used for mounting? Mounting is via a 40 mm shank, designed to fit standard toolholders requiring a solid clamping interface for reduced runout. How many cutting edges are available per head? The head is configured with 8 cutting edges, allowing for extended service life between insert changes. What fixing hardware is required for insert fastening? Insert clamping uses M3.5x11 Torx screws and M5x7 hex screws; a T15 Torx key and U plate TA052 are used for assembly and maintenance. Is the cutter head suitable for heavy-duty planing operations? Yes — the combination of 125 mm diameter, 40 mm shank and 45° cutting angle provides stability and effective chip control suited to demanding planing tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust machining solution that combines precise compatibility with common indexable inserts, low downtime through fast insert changes, and a compact, rigid design for repeatable surface finishes — order directly via Metav Werkzeuge or consult our specialists for tailored tooling recommendations. Planing cutter head T632TM — 125 mm diameter, 8 cutting edges, Teknik Makina The Planing cutter head T632TM is a compact milling head designed for face and planing operations with SNKX 1606 and ONHX 0606 indexable inserts 125 mm diameter for broad coverage 8 cutting edges for high material removal Compatible with SNKX 1606 and ONHX 0606 inserts Secure clamping with M5x12 Torx screws Consistent surface quality through robust design The milling body is engineered to deliver a stable cut and reliable surface finish even under cyclical production demands. With a 125 mm outer diameter and 8 cutting edges, the geometry distributes cutting forces to reduce vibration and tool deflection — a direct benefit for shops seeking repeatable tolerances. The 45° cutting angle provides a balanced mix of axial and radial cutting action, which reduces load peaks and extends insert life. In practice, this means fewer interruptions for regrinds and a steadier output quality across batch runs. Flexible tooling via widespread insert compatibility Designed for indexable cartridges, the head accepts SNKX 1606 and ONHX 0606 inserts, allowing quick changes and access to a wide range of grades from established suppliers such as Palbit. The compatibility with these insert types permits optimisation for different materials and cutting conditions without replacing the cutter body. The tool features a 40 mm bore for secure mounting and uses M5x12 Torx screws tightened with a T20 key, enabling efficient replacement of inserts while maintaining accurate seat location and clamping force. Workshop efficiency and serviceability At 4.026 kg the cutter body offers a good balance between rigidity and manageable handling for setup and tool changeovers. The compact overall length of 63 mm reduces overhang in many toolholders, supporting reduced runout and improved concentricity. Maintenance is streamlined by standard screw sizes and widely available insert formats, which shortens downtime and keeps production moving. For operations that rotate tooling across different machines, the consistent interface helps to standardise tooling setups and spare-part inventories. For tailored advice on integrating the Teknik Makina T632TM into machining cells or to request technical drawings and availability, contact Metav Werkzeuge in Emmerich — specialists are available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to support ordering and application decisions. Technical details Article number: T632TM Manufacturer: Teknik Makina SKU: T632TM Product type: Planing cutter head Facts Diameter: 125 mm Number of cutting edges: 8 Overall length: 63 mm Bore / mounting diameter: 40 mm Weight: 4.026 kg Cutting angle: 45° Torx screw: M5x12 Torx key: T20 Special features Compatible inserts: SNKX 1606, ONHX 0606 Suitable insert supplier: Palbit Compact design for reduced overhang Indexable inserts for fast replacement FAQ What inserts does this cutter accept? The planing cutter head T632TM accepts SNKX 1606 and ONHX 0606 indexable inserts; Palbit grades are listed as a suitable option for varied materials. Which mounting diameter does the tool require? The milling head has a 40 mm bore for mounting and is intended for toolholders that accommodate a 40 mm interface. How many cutting edges are fitted and what is the diameter? The cutter is configured with 8 cutting edges and a 125 mm diameter to deliver broad, efficient material removal. Are the fastening screws proprietary? Standard M5x12 Torx screws are used and require a T20 key, facilitating straightforward insert clamping and service. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the head's robust design and insert compatibility to secure steady surface finishes and short maintenance times; the assembly combines a 125 mm diameter, a 40 mm shank and a 75° cutting geometry for reliable milling cycles — order via Metav Werkzeuge or consult our technical team for integration advice. Face milling head (Planmesserkopf) T156TM – 125 mm diameter, for SPKN 1203 inserts (Teknik Makina) A compact face milling head Face milling head (Planmesserkopf) T156TM designed for use with SPKN 1203 indexable inserts, engineered to deliver consistent face milling on CNC milling spindles and modular toolholders *Compatible with SPKN 1203 indexable inserts *125 mm diameter for broad cutting width *40 mm shank for secure mounting *75° cutting angle for stable cuts *M8x24 clamping screws, 5 mm Allen key Stable cutting geometry for consistent surface quality The milling head’s 125 mm diameter and 75° cutting angle combine to provide a stable engagement with the workpiece, reducing chatter and improving finish on machined faces. The indexed-insert approach means the cutting edge geometry is repeatable: when inserts are rotated or replaced, the geometry is restored quickly, so consistent part quality can be maintained across production runs. The unit’s mass and construction contribute to reduced vibration, which directly benefits tool life and surface integrity. Fast maintenance and predictable uptime Designed for efficient servicing, the cutter uses standard clamping hardware — M8x24 clamping screws tightened with a 5 mm Allen key — so insert changes are straightforward and repeatable. Because SPKN 1203 inserts are widely available, stocking spares is simple and turnaround times are short. The result is a predictable maintenance rhythm and lower unplanned downtime, which supports higher machine availability and better throughput in job-shop and production environments. Mounting compatibility and application suitability With a 40 mm shank and a total length of 62 mm, the head integrates with common toolholders and spindle interfaces found in general machining and CNC departments. The tool’s mass (approximately 3.4 kg) and the configuration with ten cutting edges enable broad-face milling and efficient material removal on steels and similar materials where indexable inserts are preferred. Before ordering, confirm that the machine spindle or holder accepts a 40 mm shank and that the intended cutter diameter fits the fixture envelope for safe operation. Contact Metav Werkzeuge for availability and assistance integrating Teknik Makina’s T156TM face milling head into existing tooling setups — Metav’s technical advisors in Emmerich can provide compatibility checks and delivery information via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T156TM Manufacturer: Teknik Makina Designation: Face milling head (Planmesserkopf) for SPKN 1203 indexable inserts Facts Diameter: 125 mm Shank / mounting diameter: 40 mm Overall length: 62 mm Weight: 3.4 kg Cutting angle: 75° Cutting edges: 10 Special features Suitable for SPKN 1203 indexable inserts Clamping screws: M8x24-L Required tool: 5 mm Allen key SKU: T156TM FAQ Which insert type fits this milling head? The T156TM face milling head is designed for SPKN 1203 indexable inserts, enabling quick replacement and consistent cutting geometry. What is the cutter diameter and how does it affect machining? The 125 mm diameter provides a broad cutting width for face milling, improving material removal per pass while maintaining surface quality. Which shank size is required for mounting? Mounting requires a 40 mm shank holder; the face milling head’s dimensions (62 mm overall length) should be checked against the toolholder envelope. How many cutting edges are available and what does that mean for productivity? The head uses 10 cutting edges, allowing multiple indexed positions per insert and extended production intervals between full insert replacements. What fastening hardware is used for insert changes? Insert clamping is performed with M8x24-L screws, tightened using a 5 mm Allen key, for quick and repeatable insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a secure clamping system, internal coolant and compact dimensions delivers reliable left-hand turning with reduced vibration and consistent surface finish; the robust TH617 clamping screw and standardised interfaces simplify integration into existing toolposts. Order the PWLN holder directly via Metav Werkzeuge or consult the advisers for tailored application support. PWLN for WNMG Indexable Inserts (PWLNL 2020) — Left-hand clamping holder with internal coolant A PWLN for WNMG Indexable Inserts clamping holder engineered for left-hand turning on lathes, offering internal coolant supply and a compact 125 mm overall length for enhanced rigidity and process stability Left-hand turning orientation Internal coolant supply Compatible with WNMG 0604 inserts Compact 125 mm overall length Precision clamping for stable turning and tool life The toolholder delivers secure clamping via the specified TH617 clamping screw and an ISO-compatible seat (PWLNL 2020), designed to accept WNMG 0604 indexable inserts. The holder geometry, with a 95° cutting angle, a head width of 25 mm and a nominal holder height of 20 mm, is arranged to reduce radial runout and minimise chatter. This rigidity translates into improved surface finish and longer insert life, meaning fewer interruptions for tool changes and a more predictable production flow. Coolant-through design to improve chip control and machining reliability Equipped with internal coolant, the holder channels cutting fluid close to the cutting edge, which enhances cooling and optimises chip evacuation. For processes where consistent temperature control matters, this feature helps maintain edge integrity and reduces thermal wear on the insert. The net effect is higher process reliability and the possibility of maintaining stable cutting parameters for longer machining cycles, supporting efficient batch production and repeatable component quality. Compact footprint that reduces overhang and eases integration With an overall length of 125 mm and a weight of 0.415 kg, this clamping holder reduces overhang and increases stiffness at the tool tip compared with longer assemblies. The compact dimensions allow closer positioning to the workpiece and a lower lever arm, which helps prevent deflection during heavy cuts. Standard accessory fitments — such as the U-plate TA021, roll pin TS3, knee lever TL3 and compatibility with shank type K06-IKG1/8 — make installation straightforward and ensure rapid repeatability when replacing holders or reconfiguring turret stations. Practical details that simplify workshop use The holder is supplied with the standard hex key size 2.5 Allen for adjustment and maintenance, and it supports a cutting height of 30 mm to match common turret setups. Its design focuses on compatibility and quick assembly: the standardised interface and accessory list reduce setup time and support consistent clamping force across tooling changes. For users seeking predictable machining cycles and reduced downtime, this configuration supports a pragmatic balance of performance and maintainability. Contact Metav Werkzeuge for application advice and request the Teknik Makina PWLN holder (AP165TM) to evaluate left-hand turning with internal coolant and compact rigidity Technical data Article number: AP165TM Manufacturer: Teknik Makina ISO designation: PWLNL 2020 Suitable for inserts: WNMG 0604 Cutting direction: left Overall length: 125 mm Holder height: 20 mm Head width: 25 mm Holder width: 20 mm Cutting height: 30 mm Cutting angle: 95° Internal coolant: yes Weight: 0.415 kg Clamping screw: TH617 U-plate: TA021 Roll pin: TS3 Knee lever: TL3 Hex key: 2.5 Allen Compatible shank: K06-IKG1/8 Numbers / Core technical data Overall length: 125 mm Holder height: 20 mm Head width: 25 mm Holder width: 20 mm Cutting height: 30 mm Cutting angle: 95° Weight: 0.415 kg Design / Special features Internal coolant supply Left-hand turning orientation ISO seat: PWLNL 2020 Compatible with WNMG 0604 inserts Standard accessory list (TA021, TS3, TL3) TH617 clamping screw Supplied hex key: 2.5 Allen FAQ What inserts does this holder accept? The holder accepts WNMG 0604 indexable inserts and uses the standard ISO seat designation PWLNL 2020 for secure seating. Is the holder suitable for left-hand turning only? Yes, the toolholder is configured for left-hand turning operations as specified in the product data. Does the toolholder provide internal coolant? Internal coolant is integrated into the holder to support improved chip evacuation and edge cooling at the cutting zone. Which accessories are compatible for assembly? Assembly and clamping reference parts include the TA021 U-plate, TS3 roll pin and TL3 knee lever; the clamping screw specified is TH617. What is the overall length and how does it affect rigidity? The overall length is 125 mm; the compact footprint reduces overhang, increasing rigidity and lowering the risk of deflection during heavier cuts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precise left‑hand clamping solution with a DWLNL 2020 profile and compatibility for WN-- 0804 indexable inserts; its 125 mm length and 95° cutting angle deliver consistent tool engagement and predictable chip flow. Order directly via Metav Werkzeuge or consult the technical team for integration support. Klemmhalter (DWLNL 2020) — clamping holder for WN-- 0804, left‑hand, Teknik Makina A sturdy Klemmhalter (DWLNL 2020) engineered as a left‑hand clamping holder for turning operations using WN-- 0804 indexable inserts, suited to precision workshop and production environments. DWLNL 2020 ISO holder for WN-- 0804 inserts Left‑hand orientation, 95° cutting angle 125 mm overall length for secure reach Compact 20 mm height and 25 mm head width Consistent turning performance through defined geometry The clamping holder is designed to provide repeatable tool positioning and reliable chip control in turning applications. With an ISO designation DWLNL 2020, the holder accepts WN-- 0804 indexable inserts and locates them at a 95° cutting angle, which helps maintain a stable cutting edge engagement and predictable cutting forces. The combination of standardised geometry and a firm clamping arrangement reduces set‑up time and supports higher process repeatability on series work. Easy integration into existing toolposts and bar setups A 125 mm overall length and a compact shank make this holder straightforward to fit into common toolposts or boring bar arrangements; the bores and profile correspond with standard bar designation K08, simplifying retrofits or replacements. The left‑hand orientation is specified for operations where the tool must cut in a counter‑clockwise direction; this specification removes ambiguity at ordering and during machine set‑up, shortening downtime and improving process planning. Compact form with practical dimensional benefits Key dimensions such as a 20 mm shank height, 25 mm head width and a 32 mm cutting height are balanced to provide a low‑profile but rigid solution. The holder’s modest mass (0.442 kg) contributes to lower centrifugal loads when used on rotating boring bars, while still offering the stiffness required for moderate turning tasks. These features support stable cutting performance without requiring oversized toolholders or adapters. Compatibility and handling explained for purchase decisions Compatibility with WN-- 0804 indexable inserts means insert selection governs achievable surface finish and cutting parameters; the holder itself provides the correct seat and clamping geometry to exploit the insert’s capability. The ISO DWLNL 2020 designation standardises expectations for seat angle and clamping location, aiding purchasing decisions and ensuring interchangeability with other DWLNL‑specification components. Practical note on application planning When specifying tooling for a machine line, note the left‑hand cutting direction and the holder’s 95° cutting angle to match insert geometry and spindle rotation. If a mirror‑image operation is required, select the corresponding right‑hand variant. The clear dimensional data and ISO labelling allow planners to check for interference, reach and clearance in CAM setups or on‑machine trials before production runs. For precise left‑hand turning with standard WN-- 0804 inserts, contact Metav Werkzeuge for tailored technical advice and secure supply of the Teknik Cutting Tools clamping holder D316TM; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application specifics and availability Technical data Article number: D316TM Description: DWLN for WN-- Indexable Inserts ISO designation: DWLNL 2020 Cutting direction: left Cutting angle: 95° Overall length: 125 mm Shank height: 20 mm Head width: 25 mm Holder width: 20 mm Cutting height: 32 mm Compatible inserts: WN-- 0804 Bar designation: K08 Weight: 0.442 kg Manufacturer: Teknik Makina Numbers Overall length: 125 mm Cutting angle: 95° Shank height: 20 mm Head width: 25 mm Holder width: 20 mm Cutting height: 32 mm Weight: 0.442 kg Special features ISO DWLNL 2020 Compatible with WN-- 0804 indexable inserts Left‑hand orientation Bar designation K08 DWLN holder type for turning applications Teknik Makina production FAQ Which inserts fit this holder? The clamping holder accepts WN-- 0804 indexable inserts; compatibility follows the DWLNL seating standard. What does the 95° cutting angle mean for machining? A 95° cutting angle positions the insert close to radial, providing a compromise between clearance and cutting edge support for stable turning. Is this holder right‑ or left‑hand? This tool is a left‑hand holder, specified for counter‑clockwise cutting directions relative to the workpiece. Which ISO designation applies? The holder conforms to DWLNL 2020 ISO designation, ensuring standardised seat geometry and interchangeability. What are the key dimensions to check before fitting? Confirm the 125 mm overall length, 20 mm shank height and 25 mm head width for reach and clearance in the machine setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, right-hand clamping solution that combines secure insert retention and straightforward integration into standard turning setups; the holder’s PSSNR 2020 design and compatibility with SNMG 1204 inserts support consistent cycle times and repeatable results. Order the clamping holder directly via Metav Werkzeuge or consult the Metav team for application-specific advice. PSSN for SNMG indexable inserts (P171TM) — PSSNR 2020 clamping holder, right-hand, 45° A right-hand PSSN clamping holder for turning with SNMG 1204 indexable inserts, engineered for stable clamping and compact toolsetting in general workshop and production turning applications. PSSNR 2020 shank design for stable clamping Compatible with SNMG 1204 indexable inserts Right-hand cutting at a 45° approach angle Compact dimensions: 20 x 20 mm shank, 125 mm overall Stable clamping that reduces vibration and improves repeatability The holder’s PSSNR 2020 geometry provides a rigid interface between toolholder and insert, reducing chatter and improving surface finish on turned parts. With a defined 45° approach angle and right-hand orientation, the component is optimised for conventional turning operations where predictable chip flow and consistent tool projection are required. The compact shank footprint (bold values below) keeps overhang low, which helps to maintain cutting stability and extend insert life while also simplifying toolpost arrangement in multi-tool setups. Quick set-up and clear compatibility for efficient workflows Designed for rapid integration into existing turning stations, the toolholder accepts SNMG 1204 indexable inserts and matches common clamping practices to reduce set-up time. The overall length of 125 mm and a shank section of 20 x 20 mm allow straightforward mounting in standard toolposts; the cutting head width of 25 mm and a cutting height of 30 mm deliver the necessary support for medium-duty turning operations. The nominal mass of 0.416 kg gives a balanced feel during handling and contributes to predictable dynamic behaviour at typical spindle speeds. Practical workshop use and flexible application range This clamping tool is suitable for right-hand finishing and light-to-medium roughing where SNMG inserts are preferred for their indexable versatility. The holder’s compatibility with a K12-style boring bar designation supports integration into modular tooling systems. As a compact, mechanically simple solution, the unit helps shops streamline tooling choices and maintain repeatable set-ups across batches. The product’s SKU P171TM identifies the specific holder model for ordering and stock control, and the Teknı̇k Makina design focus ensures the holder meets common industrial expectations for robustness and ease of use. Contact Metav Werkzeuge for tailored application advice or to request availability of the PSSN clamping holder (P171TM) for your turning operations; technical consultants in Emmerich will support specification and dispatch. Technical data Article number: P171TM Manufacturer: Teknik Makina ISO designation: PSSNR 2020 Facts Shank height: 20 mm Shank width: 20 mm Cutting-head width: 25 mm Cutting height: 30 mm Overall length: 125 mm Weight: 0.416 kg Cutting angle: 45° Cutting direction: right Suitable for inserts: SNMG 1204 Special features Compatible with SNMG 1204 indexable inserts ISO designation PSSNR 2020 Boring bar designation: K12 Right-hand clamping holder for turning FAQ Which indexable inserts fit this holder? The PSSN clamping holder is designed for SNMG 1204 indexable inserts; this compatibility enables rapid index changes and standardised insert sourcing. Is the holder suitable for heavy roughing? The PSSNR 2020 design offers good rigidity for light-to-medium turning; for heavy roughing, selection should be based on machine rigidity and insert grade rather than the holder alone. What are the key dimensions to check for mounting? Important dimensions include the shank 20 x 20 mm, overall length 125 mm, cutting-head width 25 mm and cutting height 30 mm, which determine fit in the toolpost and clearance for the workpiece. How is the product identified for ordering? Order using the SKU P171TM and the model designation PSSNR 2020; the holder is listed under Teknik Makina tooling lines. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise clamping, integrated internal coolant and a 95° cutting angle for consistent chip control and repeatable turning results; the compact 125 mm design reduces interference in tight set-ups. Order the clamping holder directly via Metav Werkzeuge or consult the Metav team for application advice. Klemmhalter PWLN for WNMG Indexable Inserts — left-hand clamping holder with internal coolant (Teknik Makina) The Klemmhalter PWLN for WNMG Indexable Inserts is a left-hand clamping holder intended for turning operations with WNMG 0804 inserts, offering integrated coolant delivery and a rigid PWLNL 2020-style mounting *Left-hand turning holder for WNMG 0804 inserts *Internal coolant for improved chip evacuation *95° cutting angle for stable facing and turning *125 mm overall length, robust 20 mm shank Increased process stability through precise geometry The clamping tool is engineered for repeatable performance: compatibility with WNMG 0804 inserts and the PWLNL 2020 mounting ensure a standardised fit across common indexable insert systems. The 95° cutting angle reduces radial forces during facing and roughing, which contributes directly to longer tool life and more predictable component tolerances. Because the toolholder is designed for left-hand orientation, it is immediately suitable for lathes and turning centres configured for left-hand operations, preventing setup ambiguity and minimising changeover time. Reliable chip evacuation and cooling for higher productivity Integrated internal coolant channels deliver cutting fluid close to the cutting edge, which aids chip control and heat dissipation during demanding cuts. The result is improved surface finish and reduced thermal wear on the insert, translating into fewer interruptions for regrinding or insert changes. Combined with the holder’s compact 125 mm overall length and a cutting height of 30 mm, the design balances rigidity and access, enabling higher material removal rates where stable clamping is required. Practical fastening and compact handling for workshop efficiency Clamping is secured using the designated TH821 clamping screw together with the matching U-plate TA020-1, dowel TS-4 and lever TL4, providing a secure, repeatable seat for inserts. The holder’s modest mass (0.425 kg) and a shank dimension of 20 × 20 mm make tool changes straightforward and reduce spindle load during acceleration. Basic maintenance and setup require only the supplied 3 Allen key sizes, so downtime for assembly or replacement is kept to a minimum. Application benefits and suitability This holder excels in turning tasks that demand consistent chip flow and coolant at the cutting zone: facing, light roughing and finishing on steel and alloy components where WNMG geometry is appropriate. The compact head width (25 mm) and robust shank provide a balance between accessibility and stiffness, which is particularly useful in confined tool pockets or multi-tool turrets. The result is fewer rejects, steadier surface quality and a predictable machining cycle time. For application recommendations or to secure the Teknik Cutting Tools clamping holder AP155TM, contact Metav Werkzeuge in Emmerich for tailored technical advice and prompt supply via e‑mail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: AP155TM Manufacturer: Teknik Makina Designation: Clamping holder PWLN for WNMG indexable inserts ISO designation: PWLNL 2020 Core specifications Overall length: 125 mm Head width: 25 mm Holder width: 20 mm Holder height: 20 mm Cutting height: 30 mm Cutting angle: 95° Weight: 0.425 kg Insert size compatibility: WNMG 0804 Cutting direction: left-hand Internal coolant: yes Special features Clamping screw: TH821 U-plate: TA020-1 Dowel: TS-4 Knee lever: TL4 Allen key set: 3 Allen Compatible boring bar: K08-IKG1/8 FAQ Is this holder compatible with standard WNMG inserts? The clamping holder PWLN for WNMG indexable inserts is specified for WNMG 0804 inserts and uses the PWLNL 2020 mounting style to ensure a standardised fit. Can the holder be used with through‑coolant systems? Yes, the holder features internal coolant channels to deliver cutting fluid close to the cutting edge for improved chip control and cooling. Which cutting direction is supported by this toolholder? This toolholder is configured for left‑hand cutting direction, suitable for left‑hand turning set-ups or specific machining arrangements requiring left‑hand orientation. What fastening parts are required for installation? Installation uses the TH821 clamping screw, U‑plate TA020-1, dowel TS‑4 and knee lever TL4; the product specification AP155TM lists these matching components. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, right-hand turning solution with DCMT 11T3 compatibility and a 90° cutting angle for reliable, repeatable machining; the holder’s 20 mm head dimensions and 125 mm overall length ensure easy integration into existing setups. Order or request advice directly via Metav Werkzeuge for assured supply and technical support. Clamping holder SDACR-F for DCMT indexable inserts (right-hand) – Teknik Makina A robust SDACR-F clamping holder designed for right-hand turning with DCMT 11T3 indexable inserts, suitable for workshop and production turning tasks. Right-hand turning, 90° cutting angle Compatible with DCMT 11T3 indexable inserts ISO designation SDACR 2020 20 mm head height and 125 mm overall length Consistent cutting results through rigid clamping and geometry The holder’s design delivers rigid clamping and stable tool presentation, which reduces chatter and improves surface finish during turning operations. With a 90° cutting angle and accommodation for DCMT 11T3 inserts the tool promotes predictable chip formation and repeatable toolpaths, translating into fewer scrapped parts and reduced rework. The arrangement is particularly beneficial when consistent axial positioning and reliable insert seating are required for batch production or precision jobbing. Simple compatibility for fast tool changes and setup Designed to the ISO SDACR 2020 shank standard, the clamping solution integrates smoothly with conventional toolposts and boring-bar systems identified as K11-F. The standardised interface enables quick mounting and exchange of indexable inserts, so changeovers are faster and machine downtime is reduced. At a weight of 0.397 kg and a compact 125 mm overall length, the unit balances rigidity with manageable mass for routine workshop handling. Economical tooling and suitability for mixed workshops By accepting replaceable indexable inserts, the holder reduces consumable costs compared with solid-tool alternatives: only the cutting edge is replaced while the main body remains in service. The compact dimensions—20 mm head height and 20 mm widths—make it suitable for confined setups where space and access matter, while the right-hand orientation supports standard turning directions. This combination of economy, straightforward maintenance and compact form factor suits both small specialist workshops and larger production environments seeking consistent turning performance. For precision right-hand turning solutions from Teknik Makina, rely on the SDACR-F clamping holder—contact Metav Werkzeuge for product availability and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D444TM Product name: SDACR-F for DCMT Indexable Inserts Model designation: SDACR 2020 Brand: Teknik Makina Weight: 0.397 kg Dimensions & core data Head height: 20 mm Head width: 20 mm Shank width: 20 mm Overall length: 125 mm Cutting angle: 90° Cutting direction: right Compatibility & special features For DCMT 11T3 indexable inserts ISO designation SDACR 2020 Boring bar designation: K11-F Right-hand turning tool FAQ Which inserts fit the clamping holder? The SDACR-F clamping holder is designed for DCMT 11T3 indexable inserts and secures them for standard turning operations. Is the holder suitable for left-hand turning? This holder is configured for right-hand turning with a 90° cutting angle; left-hand operations require a corresponding left-hand tool variant. What does ISO SDACR 2020 mean for mounting? ISO SDACR 2020 denotes the shank and head geometry standard, ensuring compatibility with toolposts and holders designed for that format. Can the holder be used in small jobbing shops? Yes, the compact 125 mm overall length and modest weight make the holder practical for both small workshops and larger production environments. How does the design help reduce tooling costs? By using replaceable indexable inserts, only the cutting edges are renewed when worn, extending the service life of the holder and lowering per-edge costs. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com