Gibt es einen Hahn und Kolb Online Shop?

Benefit from a compact holder that pairs rigid clamping with precise insert compatibility — ideal for confined turning operations; its S16 shank and 80 mm length support stable setup and repeatable results. Order the Mini Stechklemmhalter directly via Metav Werkzeuge or consult the technical team if required. Mini parting clamping holder (Mini Stechklemmhalter) – S16 shank, compatible with Korloy NFTG 08 (Teknik Makina) The Mini parting clamping holder (Mini Stechklemmhalter) is a compact clamping tool for precise grooving and parting applications, designed to accept Korloy NFTG 08 indexable inserts and to be mounted on S16-compatible tool posts. Compact design for confined spaces S16 shank for rigid mounting Compatible with Korloy NFTG 08 inserts Precise rigidity in a reduced footprint for stable turning results The compact construction delivers rigid clamping despite a small envelope, which reduces chatter in confined setups. With a 16 mm shank (S16) and 80 mm overall length, the holder is dimensioned for tight tool layouts while maintaining the necessary stiffness for accurate groove and part-off cuts. This balance of size and stability supports shorter setup times and consistent workpiece finish. Designed for quick, reliable insert handling to save machining time Insert retention is engineered to secure NFTG 08 indexable tips reliably, enabling repeatable positioning and fast insert change during production. The unit’s cutting height 20 mm aligns insert geometry with common tool lines, so clamping adjustments are minimised and process reproducibility is improved. The lightweight construction (approx. 0.143 kg) eases handling during tool changes without compromising stability. Practical benefits for workshop logistics and tool selection Compatibility with Korloy inserts and a clear ISO shank designation (S16) simplifies procurement and tool planning; the holder reduces the need for multiple full-length tools in compact turning stations. The defined dimensions — diameter 5.9 mm at the cutting interface and specified shank measures — make it straightforward to check fixture fit and to standardise tooling across similar lathes and setups. For compact, high-precision grooving and parting, contact Metav Werkzeuge to secure the Teknik Makina Mini Stechklemmhalter (SKU K801TM) and confirm insert compatibility for specific applications. Technical Data Article number: K801TM Manufacturer: Teknik Makina Product: Mini parting clamping holder (Mini Stechklemmhalter) Suitable insert manufacturer: Korloy Suitable insert type: NFTG 08 Shank designation ISO: S16 Facts Shank diameter: 16 mm Cutting height: 20 mm Overall length: 80 mm Diameter: 5.9 mm Weight: 0.143 kg Features Compatible inserts: NFTG 08 Compatible insert manufacturer: Korloy Clamping rod designation: D5,9 K20 L080 SKU: K801TM Manufacturer brand: Teknik Makina FAQ Which inserts fit this clamping holder? The holder is designed for Korloy NFTG 08 indexable inserts; the geometry and clamp position accommodate the NFTG 08 form for reliable seating. What shank size is required for mounting? Mounting requires an S16 shank-compatible tool post; the holder’s 16 mm shank ensures a tight fit on standard S16 fixtures. Is the holder suitable for confined turning arrangements? Yes — the compact overall length of 80 mm and reduced envelope make this holder appropriate for tight layouts where space is limited. How does the clamping affect repeatability? The clamping concept provides rigid retention of the insert, which supports consistent positioning and repeatable cutting performance across tool changes. What is the product reference for ordering? Order under SKU K801TM; the full product name is Mini parting clamping holder (Mini Stechklemmhalter) by Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, clamp-style holder that combines a 16 mm shank and an 11 mm cutting height for precise grooving and parting on small lathes; order the tool directly via Metav Werkzeuge or contact our consultants for application advice. Mini grooving clamping tool holder K814TM — 16 mm shank, 11 mm cutting height (Teknik Makina) The Mini grooving clamping tool holder K814TM is a compact clamp-type toolholder engineered for accurate grooving and parting operations on small to medium-sized lathes. Compact 16 mm shank for restricted toolposts Compatible with D06 indexable inserts 11 mm cutting height for standard insert seating 78 mm overall length for tight working envelopes Precision performance for tight turning tasks The K814TM delivers focused cutting action through a rigid, clamp-style design that stabilises the insert during grooving and parting. With a 16 mm shank and 11 mm cutting height, the holder aligns standard D06 inserts at the correct datum to reduce vibration and tool chatter. This results in consistent groove geometry and improved surface finish. The technical layout of the holder ensures repeatable positioning, which is particularly valuable when switching inserts or restoring tool setup between jobs. Secure clamping and insert compatibility that saves setup time A simple yet effective clamping mechanism accepts D06 indexable inserts and works with the manufacturer designation D06 K11 L078, ensuring a secure fit and predictable cutting edge height. The clamp action is designed to maintain cutting-edge stability without complex adjustments, lowering setup time between operations. Compatibility with common insert geometries means fewer specialised spares in the tool cabinet and easy replacement during routine maintenance. Space-saving design for workshop efficiency Weighing just 0.082 kg and measuring 78 mm overall length, this compact toolholder is ideal where space is limited — bench lathes, toolposts with small envelopes or multi-station turrets. The 6 mm working diameter and slim profile make it suitable for intricate grooving tasks and for jobs where access is constrained. The reduced mass also minimises centrifugal load at higher spindle speeds, supporting stable cutting when paired with correct inserts and feeds. Practical supply and workshop support from Metav Sourced from Teknik Makina and available through Metav Werkzeuge, the holder benefits from straightforward logistics and a broad catalogue of compatible tools. Metav’s distribution from Emmerich combines a wide product range with dependable fulfilment, making this compact toolholder an efficient addition to production lines and repair shops. The combination of small form factor, standardised insert acceptance and reliable supply contributes to uninterrupted workflow in everyday machining. Contact Metav Werkzeuge for tailored mounting advice and immediate dispatch from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: K814TM Name: Mini grooving clamping tool holder Manufacturer: Teknik Makina Facts Shank diameter: 16 mm Cutting height: 11 mm Overall length: 78 mm Weight: 0.082 kg Working diameter: 6 mm Shank designation (ISO): S16 Special features Compatible with indexable inserts D06 Insert designation reference: D06 K11 L078 Clamp-type grooving/parting holder Compact design for small toolposts FAQ What insert size fits this holder? The holder accepts D06 indexable inserts; the reference designation on the tool is D06 K11 L078, which ensures proper seating and cutting height for typical grooving inserts. Is the toolholder suitable for small lathes and toolposts? Yes — with a 16 mm shank, 78 mm overall length and low weight (0.082 kg), the K814TM is intended for compact toolposts and restricted working envelopes. What cutting height is achieved with this toolholder? The toolholder positions the insert at an 11 mm cutting height, matching standard insert geometries to simplify setup and maintain repeatable tool datum. Can this holder be used for parting as well as grooving? The clamp-style design and insert compatibility make it suitable for both grooving and parting operations where the insert geometry and cutting parameters are selected appropriately. Which brand manufactures the holder and where is it sourced from? The holder is manufactured by Teknik Makina and is supplied via Metav Werkzeuge under article number K814TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact design with secure M6 clamping and a 6 mm shank interface to keep parting and cut‑off operations precise and repeatable; order the item directly via Metav Werkzeuge or consult the specialists for application support. Mini parting tool holder DC334TM — compact 20 mm body, M6 clamping (Teknik Makina) The Mini parting tool holder is a compact clamp intended for precision cut‑off and grooving tasks on smaller lathes, offering a slim 20 mm body for tight toolposts and a standard 6 mm shank interface for common micro tools Compact 20 mm body for tight toolposts 6 mm shank interface for standard micro tools M6 clamping thread for secure fixation 88 mm overall length, weighs 0.227 kg Compact design that preserves toolpost space while improving stability The small footprint of this holder reduces obstruction on the turret and allows closer tool spacing without sacrificing rigidity. Built as a purpose‑made clamp for parting operations, the 20 mm outer diameter and slim profile mean that precision can be maintained even in dense tool arrangements. The holder’s form factor supports accurate alignment, which in turn reduces chatter and extends insert life — a measurable productivity gain for series and single‑piece production. Secure clamping and straightforward mechanical interface for reliable cuts A dedicated M6 clamping thread provides a consistent clamping force while the 6 mm shank interface ensures compatibility with standard micro tool shanks. This combination of thread and shank dimensions was selected to balance accessibility and holding power, enabling reliable parting actions with reduced risk of slippage. The mechanical simplicity also minimises maintenance requirements and makes the holder suitable for repetitive industrial use. Easy integration into existing setups with clear dimensional data With an overall length of 88 mm and a nominal weight of 0.227 kg, the holder slots into compact turning centres without significant changes to balance or machine dynamics. These specific dimensions allow production planners and tooling engineers to calculate centre‑to‑centre distances and clearance envelopes quickly. The concise geometry supports a rapid tool change routine and helps standardise tooling racks across smaller‑scale turning applications. Purpose and users: where this holder adds measurable value Engineered for workshops, small industrial cells and precision maintenance work, the clamp is ideal where space is limited but cutting quality must remain high. The construction suits repetitive parting and grooving where consistent alignment and firm clamping reduce scrap rates. As a robust, no‑frills component it complements broader clamping systems and supports efficient workflows in trade and light industry environments. Contact Metav Werkzeuge for technical advice on the Teknik Cutting Tools Mini parting tool holder (DC334TM) — Metav Werkzeuge holds stock in Emmerich and can be reached at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DC334TM Manufacturer: Teknik Makina Dimensions & weight Diameter: 20 mm Overall length: 88 mm Shank interface: 6 mm Thread: M6 Weight: 0.227 kg Features Compact parting tool holder Suitable for 6 mm shanks M6 clamping thread for secure fixation ECLASS: 21181005 FAQ Is the holder suitable for standard micro tool shanks? The holder accepts a 6 mm shank interface, so standard 6 mm micro tool shanks are compatible with the DC334TM parting tool holder by Teknik Makina. Which thread is used for clamping and fixation? Clamping is achieved via an M6 thread; the M6 fixation ensures steady clamping forces for cut‑off operations. What are the overall dimensions and mass of the component? The holder has a 20 mm body diameter, an overall length of 88 mm and a weight of 0.227 kg as specified for the DC334TM. Can the holder be used in compact toolposts on small lathes? Yes, the compact 20 mm body is designed to fit tight toolposts and dense tool arrangements typical of small lathe setups. Is the DC334TM suitable for repeated industrial use? The simple, robust design with M6 clamping and a 6 mm shank interface supports repetitive parting work and is intended for workshop and light industrial applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the compact construction and secure M6 clamping for stable, repeatable parting operations — the compact profile and 7 mm shank ensure easy integration into tight toolposts; order the holder directly via Metav Werkzeuge or ask our consultants for machine-specific advice. Mini parting tool holder DC340TM — compact clamp with M6 thread, 20 mm diameter (Teknik Makina) The Mini parting tool holder DC340TM is a compact clamp designed for precise parting and grooving tasks on small lathes and turning centres Compact 88 mm length for tight toolposts 7 mm shank diameter for small toolholders M6 thread for secure clamping 20 mm outer diameter for stable support Save space without sacrificing rigidity The compact 88 mm overall length is engineered to fit tight toolposts and crowded turrets, making the holder especially useful where clearance is limited. Its reduced physical footprint improves access to the workpiece and simplifies multiple-tool setups, while the 20 mm diameter body provides a stable contact surface that minimises lateral play. For workshops seeking efficient layout and faster tool changes, this low-profile design contributes to shorter setup times and a neater workstation. Consistent clamping for repeatable cuts The clamping mechanism, secured via an M6 thread, provides positive axial tightening that translates into reliable tool retention and repeatable cutting results. Paired with the 7 mm shank, the construction ensures a firm bearing in small toolholders and minimises micro-movements during parting operations. This mechanical stability supports consistent cutting depths and surface finishes, reducing scrap rates and the need for frequent rework — a practical efficiency gain for production and prototyping alike. Built for small turning tasks and versatile use Designed with light-duty lathes and fine-turning tasks in mind, the holder is suited to parting and grooving applications where precision matters more than raw cutting force. The low-mass assembly facilitates controlled engagement with the workpiece and helps maintain alignment when working on narrow shoulders or delicate components. As a compact clamping option, it integrates into setups that require accuracy and agility rather than heavy material removal. Lightweight design that curbs vibration and eases handling At approximately 0.219 kg, the holder offers a low-inertia solution that reduces vibrational tendencies compared with bulkier alternatives. Lower mass contributes to calmer tool behaviour during short, precise cuts and helps protect fragile inserts or narrow parting blades. Additionally, the modest weight improves manual handling during tool changes, allowing quicker, safer adjustments when optimising cutting position or replacing consumables. For supply and expert advice on Teknik Makina's DC340TM, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery from our European stock Technical data Article number: DC340TM Designation: Mini parting tool holder Manufacturer: Teknik Makina Weight: 0.219 kg Core dimensions Overall length: 88 mm Diameter: 20 mm Shank diameter: 7 mm Thread: M6 Special features Mini parting tool holder design Compact, low-mass construction Threaded clamping for secure retention FAQ Which machines is this holder suited for? The DC340TM mini parting tool holder by Teknik Makina is intended for small lathes and compact turning centres where space is limited and precise parting or grooving is required. How is the cutting tool secured in the holder? Clamping is achieved via an M6 threaded fastener on the DC340TM, providing a tight axial clamp that ensures secure retention of a parting blade or small cutter. What shank size is required for the toolpost? The holder uses a 7 mm shank, so toolposts and collet systems accepting that diameter are compatible with the DC340TM. Can this holder be used for both parting and grooving? Yes — the mini clamp design is suitable for controlled parting and narrow grooving operations where precision and low interference are essential. Does the weight contribute to tool stability? With a mass of 0.219 kg, the holder has reduced inertia which helps lower vibration during short, precise cuts and improves handling during tool changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact holder that delivers secure clamping with a small footprint: the combination of a 20 mm clamping diameter, M6 thread and an overall length of 88 mm supports stable parting and grooving setups while keeping tool overhang to a minimum; order directly via Metav Werkzeuge or consult their specialists for application advice. Mini parting clamp holder DC316TM — mini parting tool holder, 20 mm diameter, M6 thread (Teknik Makina) A compact Mini parting clamp holder DC316TM engineered for precise clamping of parting inserts in confined turning applications. Compact design for confined machining spaces 20 mm clamping diameter for small tools M6 threaded attachment for secure fixing Lightweight 0.222 kg reduces tool overhang Stable clamping for precise parting operations The mini parting clamp holder is designed to deliver consistent clamping force in delicate turning tasks. With a defined 20 mm clamping diameter and an M6 threaded fixing, the holder secures the insert reliably while keeping vibrations low. The combination of these measurable features supports repeatable cuts and controlled tool engagement, which is particularly relevant in small-lathe production where stability directly affects surface finish and dimensional accuracy. Space-efficient form that simplifies workshop setup A reduced overall length of 88 mm and a small shank diameter of 4 mm enables installation in compact tool posts and limited-tooling environments. This space-saving geometry shortens the distance between the cutting edge and the turret, lowering the bending moment and helping to maintain tool alignment. The relatively low mass of 0.222 kg further minimises dynamic load on the machine carriage, contributing to smoother cuts and reduced risk of chatter in sensitive operations. Clear compatibility for straightforward integration Mounting and mechanical integration are facilitated by the standard M6 thread and a 4 mm shank interface, which match common small-lathe tool posts and adaptors. The SKU DC316TM identifies the exact specification for procurement and inventory management. Where clarity is required for fixture selection, these numeric values provide a verifiable basis for cross-checking fitment with existing tooling and quick adaptation in mixed-equipment shops. Practical handling and maintenance benefits The simple mechanical design focuses on low-maintenance operation: the standard thread connection allows secure fastening without specialised tooling, and the compact size reduces the number of handling steps when setting up a new workpiece. These operational efficiencies shorten changeover times and contribute to a steady workflow in workshops that prioritise throughput and reproducible results. Contact Metav Werkzeuge for tailored application support and fast supply of the DC316TM mini parting clamp holder from Emmerich—technical consultants are available to advise on fitment and compatibility Technical data Article number: DC316TM Product name: Mini-Stechklemmhalter Manufacturer: Teknik Makina Facts Diameter: 20 mm Thread: M6 Overall length: 88 mm Shank / mounting diameter: 4 mm Weight: 0.222 kg Special features Compact parting clamp holder Standard M6 attachment Small shank for confined tool posts FAQ What size of clamping diameter does this holder provide? The holder features a 20 mm clamping diameter, specified for the Mini parting clamp holder DC316TM to support small tooling. Which thread is required for mounting this clamp holder? Mounting uses an M6 thread; the DC316TM is supplied with this standard connection for secure fastening. Is the holder compatible with small-lathe tool posts? Yes, the 4 mm shank and M6 thread make the DC316TM suitable for many compact tool posts and adaptors used in small-lathe environments. How does the overall length affect setup? An overall length of 88 mm reduces tool overhang and helps maintain stiffness during parting operations with the DC316TM. What is the weight of the clamp holder and why is it relevant? The weight is 0.222 kg; lower mass reduces carriage load and can improve dynamic stability in fine-turning applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine compact form factor, secure M6 fastening and easy bench integration to streamline cut‑off operations; the compact dimensions and light weight support tight setups without adding bulk. Order the Mini parting tool clamp holder directly via Metav Werkzeuge or consult our specialists for compatibility questions. Mini parting tool clamp holder (DC318TM) — compact clamp holder with 22 mm body and M6 thread by Teknik Makina The Mini parting tool clamp holder is a compact clamping solution for light parting and cut‑off operations on small lathes and precision turning rigs Compact 22 mm body diameter M6 thread for secure fastening 88 mm overall length for deep reach 4 mm tool shank mounting diameter Lightweight construction, 0.274 kg Space‑saving design that maintains rigidity and accessibility The holder’s compact envelope is engineered for confined toolposts where clearance is limited; a 22 mm body diameter and an 88 mm overall length allow the clamp to be positioned close to the workpiece while still preserving access for coolant and chip evacuation. Reduced bulk does not mean reduced stability — the lightweight nature (0.274 kg) minimises inert mass on the toolpost, which helps to reduce vibration in short‑run and prototype turning operations. For workshops that need a reliable, space‑efficient clamping element, this configuration supports repeatable set‑ups without extensive toolpost modification. Secure fastening and straightforward mounting for consistent results Clamping security is delivered via the M6 thread, which provides a standardised interface for positive fixation in common small‑lathe toolposts. The holder accepts a 4 mm mounting or shank diameter, allowing straightforward insertion of narrow parting blades or compatible adaptors. This combination of M6 thread and precise mounting bore ensures that cutting geometry is held firmly, contributing to predictable parting depths and improved process stability. Where accuracy is required, the mechanical simplicity of the design makes torque checks and routine re‑clamping fast and verifiable. Practical integration for small‑batch production and workshop flexibility Designed for short runs, repair work and specialist prototypes, this mini clamp holder suits compact turning cells and hobby‑pro workshop benches. The small form factor aids quick tool changes and reduces interference with adjacent holders or tailstock operations, helping to maintain cycle times in mixed production. Maintenance is straightforward: keep the clamping surfaces clean and inspect the thread and bore for wear to retain repeatability. For integrators and maintenance teams, the holder is a pragmatic choice where footprint and predictable behaviour matter more than extra complexity. For compact turning tasks, contact Metav Werkzeuge in Emmerich to discuss integrating the Teknik Makina DC318TM into existing tooling; our team can advise on fitting, compatibility and delivery — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DC318TM Manufacturer: Teknik Makina Facts Diameter: 22 mm Overall length: 88 mm Mounting bore: 4 mm Weight: 0.274 kg Special features Type: Mini parting tool clamp holder Thread: M6 Eclass: 21181005 FAQ What tool shank sizes does the holder accept? The Mini parting tool clamp holder accepts a 4 mm mounting bore; the 4 mm dimension is intended for narrow parting shanks and compatible adaptors in compact turning setups. How is the cutting blade secured in the holder? Securing is achieved via the M6 thread interface and the clamp body’s bore; the M6 thread provides a standardised fastening that ensures the blade is held firmly during parting operations with the Mini parting tool clamp holder (DC318TM). Is the holder suitable for reaching deep cross‑section parts? With an overall length of 88 mm the holder provides additional reach compared with very short holders; the compact 22 mm body reduces interference while enabling access to moderately recessed features. What routine maintenance is recommended? Regular cleaning of clamping faces, inspection of the M6 thread and verification of bore integrity will preserve repeatability. Light lubrication of the threaded connection is advised; the Mini parting tool clamp holder should be checked for wear after extended service. Which measurements define the holder’s footprint? Key dimensions are: body diameter 22 mm, overall length 88 mm, mounting bore 4 mm and weight 0.274 kg for handling and toolpost planning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from compact, high-repeatability clamping with clear mechanical specifications: the combination of a 16 mm head diameter, M6 thread and an 88 mm overall length ensures secure mounting and reduced vibration for small turning tools; order directly via Metav Werkzeuge or consult our specialists for fitment advice. Mini tool clamp holder – compact clamping for small turning and grooving tools (Teknik Makina) The Mini tool clamp holder is a compact clamping solution designed for small turning and light grooving duties where space is limited and reliable fixation is required Compact 88 mm overall length 16 mm head diameter for small tools M6 thread for secure mounting Lightweight 0.153 kg for easy handling Precision clamping that reduces vibration and improves finish The compact design delivers focused holding force for small cutting implements. With a 16 mm head diameter and a standard M6 thread, the holder provides secure clamping that reduces micro-movement during light turning operations, which in turn improves surface finish and tool life. The short overall length helps to minimise overhang and consequential vibration, offering a practical route to higher process stability for bench lathes and small CNC toolposts. The emphasis here is on measurable performance: less chatter, better repeatability and predictable results. Fast setup and workshop compatibility for efficient workflows The reduced mass—just 0.153 kg—and a compact footprint mean quicker handling and faster tool changes on busy benches. The 5 mm shank diameter acceptance allows integration with common mini toolholders and adaptors, so set-up time is reduced and changeover routines become more efficient. This translates into improved machine uptime and lower indirect production costs, a tangible efficiency gain for maintenance and operations teams looking to streamline small-part manufacturing tasks without complex retooling. Robust specification for consistent, everyday use The designation and mechanical values indicate a purpose-built clamp for small tooling needs: 88 mm overall length for constrained spaces, a robust M6 thread for repeatable mounting and a modest mass for safe handling. These characteristics make the component suitable where compactness and dependability are priorities. Technical clarity supports procurement decisions: the holder is defined by its measurable dimensions and standard interfaces rather than vague claims, simplifying compatibility checks and inventory planning. For reliable small-tool clamping from Teknik Makina, contact Metav Werkzeuge for tailored advice and swift supply from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: DC324TM Manufacturer: Teknik Makina Facts Diameter: 16 mm Thread: M6 Overall length: 88 mm Shank diameter: 5 mm Weight: 0.153 kg Special features Product name: Mini tool clamp holder eClass: 21181005 Storytrigger: klemmhalter FAQ What thread size does the clamp use? The clamp uses an M6 thread for mounting and secure fixation in compatible toolposts. Which shaft or shank diameter is accepted? The item accepts a 5 mm shank, making it suitable for mini tool adaptors and small-diameter holders. Is the holder suitable for heavy-duty turning? This compact clamp is optimised for small turning and light grooving tasks; its dimensions and weight indicate suitability for light-duty applications rather than heavy roughing. How does the compact length benefit the machining process? A reduced overall length of 88 mm lowers overhang, which helps to minimise vibration and improves repeatability during small-part machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compact 88 mm design, secure M6 fastening and an 8 mm shank for stable, space-saving parting and grooving operations; order the item via Metav Werkzeuge for dependable supply and specialist advice. Mini parting clamp holder DC346TM — compact clamp holder with M6 thread The Mini parting clamp holder DC346TM is a compact clamp solution for parting and grooving in confined turning setups, designed to integrate with standard small toolholders. Compact 88 mm overall length for tight spaces 8 mm shank diameter for standard toolholders M6 thread for secure fastening Lightweight 214 g for minimal overhang Stable clamping in confined tool zones improves process reliability The compact construction with an overall length of 88 mm and a reduced shank diameter of 8 mm allows this clamp holder to be mounted where space is limited without compromising rigidity. Reduced overhang diminishes vibration and run-out, which supports stable cutting conditions and contributes to more consistent part geometry. For routine shop-floor applications, the design translates directly into fewer rejects and steadier cycle times when performing parting or narrow-groove operations. Secure fastening and straightforward integration with existing setups A standard M6 threaded clamping interface and a head diameter of 20 mm make the component compatible with many small toolposts and adaptors. The secure thread engagement ensures the clamp block remains fixed during axial loads encountered in cut-off work, improving repeatability. The holder’s modest mass (214 g) reduces centrifugal and inertia effects on smaller lathes, helping to preserve tool alignment and reducing the need for frequent re-adjustment. Efficiency gains from a no-frills, purpose-built clamp Engineered as a minimalist clamping solution, this holder focuses on the essentials: compact footprint, reliable mechanical connection and low mass for reduced dynamic load. These attributes decrease setup time and help maintain cutting-edge condition for mounted tools, which in turn supports longer intervals between maintenance and tool change. Specified as DC346TM and supplied by Teknik Makina, the unit is suited to workshops seeking pragmatic solutions for tight-turning or parting tasks where standard, bulky holders would be impractical. For compact, reliable parting performance, choose the Teknik Makina Mini parting clamp holder DC346TM and contact Metav Werkzeuge for tailored supply and expert advice from Emmerich: info@metav-werkzeuge.com • +49 2822 7131930 Technical data SKU: DC346TM Manufacturer: Teknik Makina Data Shank diameter: 8 mm Head diameter: 20 mm Thread: M6 Overall length: 88 mm Weight: 0.214 kg ECLASS: 21181005 Special features Product type: clamp holder Application: parting / grooving (turning) Compact design for tight spaces Standard thread interface for easy mounting FAQ What materials is the clamp holder compatible with? The Mini parting clamp holder DC346TM is a mechanical clamping component; suitability for specific materials depends on the cutting tool and insert chosen rather than the clamp itself. Which shank and thread sizes does this holder use? This holder accepts an 8 mm shank and secures using an M6 thread as specified for DC346TM by Teknik Makina. Can the DC346TM be used on small bench lathes? Yes, the compact 88 mm overall length and lightweight construction make the holder suitable for smaller lathes where reduced overhang is important. Is the holder supplied with mounting screws or accessories? Only the core product information is provided here; refer to Metav Werkzeuge for details on delivery scope and available accessories for the DC346TM. How does the design affect tool life and finish? By reducing overhang and improving clamping stability, the holder helps to lower vibration and run-out, which can extend insert life and improve surface finish during parting operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compact dimensions (Ø16 mm, 75 mm overall) and M6 threaded fastening to secure small turning and parting tools with consistent repeatability; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Mini parting clamp holder – compact clamp for parting and grooving, Ø16 mm, M6 thread (Teknik Makina) The Mini parting clamp holder is a compact clamping solution designed for light-duty parting and grooving tasks on small lathes and fixtures, offering a space-saving profile for restricted tool posts Compact 75 mm overall length Secure M6 thread fastening Accepts 4 mm tool shanks Light weight for reduced overhang Space-saving design for tighter tool posts The holder’s 75 mm overall length and slim Ø16 mm body provide a clear advantage where access is limited or several tools must be arranged close together. The short profile reduces overhang and allows closer tool-to-workpiece positioning, which helps to maintain rigidity in smaller setups. For workshops that value efficient use of the tool post and minimal interference with tailstock or steady rests, this compact format translates into fewer changeovers and improved cycle consistency. Positive clamping and reliable repeatability A standard M6 thread secures the clamp to the tool post and ensures consistent seating after each operation. The internal 4 mm bore is intended for small-diameter cutting or parting blades and enables a tight mechanical grip without requiring complex adapters. Because the fastening is straightforward and mechanically positive, the result is repeatable axial positioning and reduced micro-movements during cut, contributing to more uniform component faces and longer tool life. Low mass for dynamic stability Weighing just 0.139 kg, the unit minimises centrifugal loads on rotating assemblies and lowers the static moment on the tool post. This light construction supports smoother acceleration and deceleration in short-cycle turning and reduces the risk of chatter when paired with suitable inserts or blades. The reduced mass also makes manual handling and quick set-ups faster, which benefits small-batch production and rapid prototyping environments. Simple integration into workshop workflows The design follows common workshop conventions to allow fast fitment and exchange. The clamp function is intuitive: secure the parting blade in the bore, tighten the M6 fastening and verify alignment. For inspection and maintenance routines, the straightforward geometry permits quick cleaning and reinstallation without special tools. The compact clamp is therefore well suited to training workshops, maintenance bays and smaller production cells where straightforward, low-maintenance tooling is preferred. Application focus and procurement clarity Intended primarily for light-parting and grooving on small turning centres, the item provides a pragmatic combination of precision clamping and footprint efficiency. The unit is identified as SKU DC312TM and is offered by Teknik Makina; for complex fixtures or non-standard tool shanks, consult Metav Werkzeuge to confirm compatibility and mounting options before specification. For tailored procurement or technical clarification on the Teknik Cutting Tools mini parting clamp holder (SKU DC312TM), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and reliable supply. Technical data Article number: DC312TM Product name: Mini parting clamp holder Manufacturer: Teknik Makina Facts Diameter: 16 mm Thread: M6 Overall length: 75 mm Bore for tool shank: 4 mm Weight: 0.139 kg Special features Compact, space-saving design Positive threaded fastening Suited to parting and grooving tasks Lightweight for reduced overhang FAQ What tool shank diameter does the holder accept? The holder accepts a tool shank of 4 mm, enabling secure clamping of small parting blades and inserts in the internal bore. Which thread is used to fasten the clamp to the tool post? Fastening is by M6 thread, providing a standard, mechanically positive connection for consistent seating. Is the clamp suitable for heavy-duty parting? This compact clamp is intended for light to moderate parting tasks; its 75 mm length and light weight prioritise accessibility and rigidity in small setups rather than heavy industrial cutting. How does the short overall length benefit set-up? The 75 mm profile reduces overhang, allows closer tool placement, and improves rigidity on small lathes, which can enhance finish and dimensional control. What is the product identifier for ordering? Order reference: DC312TM (Mini parting clamp holder by Teknik Makina) Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Product Technical Specifications: Order Number: K472TM Item: Boring Bar usable with DC-- 11T3 Indexable Inserts Brand: Teknik Makina ISO Code: S20Q SDXCR 11 Numbers and Data: Diameter: 25mm Weight: 0.435kg Total length: 180mm Cutting Height: 40mm Additional Informattion Cutting Direction: rechts Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Detailed Technical Data: Order Number: K320TM Item: Boring Bar usable with VCMT 1103 Indexable Inserts Brand: Teknik Makina ISO Code: S20Q SVQCL 11 Numbers and Data: Diameter: 25mm Weight: 1.762kg Total length: 180mm Cutting Height: 30mm Additional Informattion Cutting Direction: links Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Characteristics: Item: Boring Bar ISO Code: S20R MTUNL 16 Brand: Teknik Makina Order Number: K519TM usable with TNMG 1604 Indexable Inserts Diameter: 25mm Angle: 93° Total length: 200mm Cutting Height: 50mm Cutting Direction: links Weight: 0.513kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Technical Information: Order Number: P310TM Item: Boring Bar usable with DNMG 1506 Indexable Inserts Brand: Teknik Makina ISO Code: S25S PDUNL 15 Numbers and Data: Diameter: 32mm Weight: 0.93kg Total length: 250mm Cutting Height: 50mm Additional Informattion Cutting Direction: links Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Technical Information: Order Number: K432TM Item: Boring Bar usable with WN-- 0804 Indexable Inserts Brand: Teknik Makina ISO Code: S40T MWLNR 08 Numerical Representations: Diameter: 50mm Weight: 2.841kg Total length: 300mm Cutting Height: 60mm Additional Informattion Cutting Direction: rechts Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Take advantage of a compact tooling solution that blends process reliability, straightforward compatibility and flexible coolant options; the set’s diameters 10–20 mm range and right-hand cutting ensure consistent chip control, while availability with or without internal coolant lets production cells be adapted to existing coolant circuits — order via Metav Werkzeuge or consult the specialists for an application match. Bohrstangen-Set (Drill Rod Set) by Teknik Makina — right-hand, optional internal coolant, diameters 10–20 mm A Bohrstangen-Set intended for turning operations and indexable insert holders, available with or without coolant supply for flexible machine integration Right-hand cutting direction Compatible with CC--0602 & CC--09T3 inserts Set covers diameters 10–20 mm Stable process performance through controlled chip evacuation The set was created to provide consistent cutting behaviour in standard turning tasks where reproducibility matters. The option to specify internal coolant supports directed lubrication and cooling at the cutting zone, reducing heat build-up and improving tool life; combined with the right-hand cutting geometry this leads to predictable chip flow and stable surface finishes. These characteristics translate into fewer tool changes and less downtime in routine production runs. Versatile compatibility that reduces tooling complexity Supplied as a 4-piece set, the holders in this package accept common indexable inserts (notably CC--0602 and CC--09T3) and correspond to the toolholder types listed in the content (e.g. A08H SCLCR 06, A16M SCLCR 09). This compatibility allows consolidation of insert stocks and simplifies reconditioning routines. Fast mechanical fastening is achieved using the specified Torx standards (Torx T8/T15) and the matching screws (M2.5x5.5 and M3.5x8.5), facilitating reproducible clamp forces and reliable repeatability at changeover. Practical design for quick set-up and reliable handling The set’s compact mass (0.464 kg) and clear diameter range (10–20 mm) make it suitable for small to medium-sized turning centres where handling and storage efficiency are priorities. The holders are designed for straightforward insert replacement and secure clamping, which reduces set-up time. Documentation and part references are streamlined so maintenance teams can identify the correct insert geometries and fastening components without prolonged trial and error. Contact Metav Werkzeuge for an application check and rapid supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the Teknik Makina drill rod set and compatibility with existing tooling systems Technical Data Article number: IPS01TM Manufacturer: Teknik Makina Content: A08H SCLCR 06, A10J SCLCR 06, A12K SCLCR 06, A16M SCLCR 09 Facts Weight: 0.464 kg Set: yes Pieces per set: 4 Diameter range: 10–20 mm Cutting direction: right Special features Internal coolant: yes (with or without coolant option) Compatible inserts: CC--0602, CC--09T3 Torx keys: T8 and T15 Screws: M2.5x5.5 and M3.5x8.5 FAQ What insert types fit this set? The Bohrstangen-Set accepts indexable inserts of the CC--0602 and CC--09T3 types; the holders listed in the content correspond to these insert geometries. Is internal coolant included or optional? The drill rod set is available with or without internal coolant; specify the coolant option when ordering to ensure compatibility with existing machine coolant circuits. How many holders are supplied in one set? One set contains four holders, as stated under pieces per set; the set covers diameters from 10 to 20 mm. Which fastening tools and screws are relevant for assembly? Assembly and clamping reference Torx keys T8 and T15 and the screws M2.5x5.5 and M3.5x8.5 to achieve the required clamp forces and repeatable positioning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the left-hand cutting geometry and the internal coolant option to streamline internal turning operations while maintaining tool life and chip control; order the set directly via Metav Werkzeuge or ask the consultants for application advice. Boring Bar Set IPS21TM – left-hand cutting, with or without coolant (Teknik Makina) The Boring Bar Set IPS21TM supplies left-hand boring bars suitable for CNC turning and internal machining, available in variants with or without internal coolant to match different process requirements Left-hand cutting direction for specific turning tasks Compatible with CC-0602 and CC-09T3 indexable inserts Set covers diameters 10–20 mm for internal boring Option for internal coolant or non-coolant use Engineered for precision in internal turning The set is designed around a left-hand cutting geometry that is optimised for particular internal turning tasks where tool orientation and chip flow are critical. The bars accept common indexable inserts, specified for this range as CC-0602 and CC-09T3, which allows the machining strategy to be aligned with existing workshop tooling and inventory. Because the toolholders are made to secure indexable inserts reliably, tool changeovers are simplified and clamping repeatability is improved, which reduces downtime during batch production. The configuration is intended to support stable metal removal and to be suitable for integration into established CNC turning cycles. Control of cutting environment with optional internal coolant Available in a version with or without coolant, the set lets process planners choose coolant-fed holders where improved lubrication and chip evacuation are required. When the internal coolant option is selected, coolant is delivered close to the cutting zone, which can support longer insert life and more consistent cutting temperatures. The variant without coolant is provided for dry machining or for applications where external coolant is already optimised. Mounting and coolant interfaces are designed to fit common lathe toolpost arrangements, and the left-hand orientation is retained across both variants to maintain programme consistency. Practical range and workshop benefits for efficient production The assortment covers a diameter range of 10–20 mm, providing a compact but versatile selection for internal boring operations. The composition of the set is geared towards everyday turning tasks and is presented to integrate with standard insert geometries, enabling quick adaptation to part-specific demands. Assembly and fastening use familiar hardware sizes, including Torx T8/T15 keys and the matching Torx screws M2.5×5.5 and M3.5×8.5, which are included in the technical specification to facilitate maintenance and reconfiguration. The complete set weighs 0.96 kg, making it manageable for handling and storage while still robust enough for industrial use. Teknik Makina's design emphasis on compatibility and process flexibility supports efficient workshop workflows and predictable results. Contact Metav Werkzeuge in Emmerich for tailored technical advice on Teknik Makina's IPS21TM boring bar range or to discuss the coolant variant that best suits the production requirement: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: IPS21TM Manufacturer: Teknik Makina ECLASS: 21189217 Facts Diameter range: 10–20 mm Weight: 0.96 kg Pieces per set: 4 Special features Left-hand cutting direction Variants: with or without internal coolant Compatible inserts: CC-0602, CC-09T3 Torx keys: T8 and T15 Torx screws: M2.5×5.5 and M3.5×8.5 Content designations: S08H SCLCL 06, S10J SCLCL 06, S12K SCLCL 06, S16M SCLCL 09 FAQ What insert types fit this boring bar set? The boring bar set accepts CC-0602 and CC-09T3 indexable inserts, enabling compatibility with common insert geometries and simplifying inventory alignment for the workshop. Is there a coolant-fed option for the bars? Yes, the IPS21TM is available with or without internal coolant, allowing selection of a coolant-fed holder where closer lubrication and improved chip evacuation are required. Which cutting direction is provided by these bars? These toolholders feature a left-hand cutting orientation, which is maintained across both coolant and non-coolant variants for consistent programme setup. What diameter range does the set cover? The set covers a 10–20 mm range suitable for a variety of internal boring tasks and for integration with standard lathe setups. Are the necessary fastening tools specified? The technical specification lists Torx T8/T15 keys and the matching Torx screws M2.5×5.5 and M3.5×8.5 to support secure assembly and straightforward maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust internal coolant capability, secure Torx T8 clamping and broad compatibility with DC--0702 indexable inserts to streamline turning operations. The three-piece set covers diameters from 12–20 mm, enabling quick size selection and reduced tool changeover. Order directly via Metav Werkzeuge or consult our technical team for application matching. Boring Bar Set IPS03TM — right‑hand boring bars with internal coolant option (Teknik Makina) The Boring Bar Set IPS03TM is a three-piece right‑hand set of turning boring bars for indexable inserts, offered with or without internal coolant for metal‑cutting workshops and production environments. Internal coolant option for stable chip evacuation Compatible with DC--0702 indexable inserts Set of three bars, diameters 12–20 mm Torx T8 fastening with M2.5×5.5 screws Improved thermal control and consistent tool life The inclusion of an internal coolant pathway in the holders helps to remove heat directly at the cutting edge, which reduces built-up edge and lengthens tool life. In practice, coolant delivery through the shank promotes stable cutting temperatures and better chip breaking during continuous turning operations. The right‑hand cutting geometry ensures predictable chip flow and repeatable results when machining common materials; this improves process stability and reduces the need for frequent rework. The set therefore supports higher uptime and a smoother production flow. Secure clamping and broad insert compatibility Designed for use with DC--0702 indexable inserts, the holders provide a reliable seating geometry that aligns insert position and rake consistently for uniform surface finish. Fastening is achieved with a Torx T8 drive and M2.5×5.5 screws, delivering a secure clamp that minimises vibration transfer and maintains cutting geometry under load. The precise pocket and clamp arrangement simplify insert changes and reduce setup time, making the set suitable for both skilled machinists and busy workshop teams seeking reproducible accuracy. Versatile set for quick machine changeovers The set contains the three holder types A10J SDQCR 07, A12K SDQCR 07 and A16M SDQCR 07, covering a practical diameter range of 12–20 mm in a compact grouping. At a combined weight of approximately 0.434 kg, the collection is lightweight to handle yet rigid enough for routine turning tasks. Supplied as a coordinated trio, the holders reduce inventory complexity and speed selection for varied jobs — from finishing passes to semi‑roughing — offering a pragmatic solution for shops aiming to consolidate tooling without sacrificing performance. For application advice, availability or to request supply from Metav Werkzeuge, contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt local assistance and stock information Technical Data Article number: IPS03TM Manufacturer: Teknik Makina Designation: Boring Bar Set (with or without coolant) Facts Weight: 0.434 kg Diameters: 12–20 mm Pieces per set: 3 Torx key size: T8 Torx screw: M2.5×5.5 Cutting direction: right‑hand Special features Internal coolant option Compatible with DC--0702 indexable inserts Includes A10J SDQCR 07; A12K SDQCR 07; A16M SDQCR 07 Right‑hand turning boring bars Supplied as a coordinated set FAQ Which inserts fit these holders? The holders in the Boring Bar Set IPS03TM are designed for DC--0702 indexable inserts; this alignment ensures correct seating and reliable cutting geometry for turning operations. Is the set supplied with internal coolant lines fitted? The IPS03TM is offered with or without coolant; specify the coolant option when ordering to receive holders with internal coolant channels. What diameters are covered by the set? The trio covers a diameter range of 12–20 mm, delivered as three coordinated holders A10J SDQCR 07, A12K SDQCR 07 and A16M SDQCR 07 for flexible size selection. How are the inserts secured in the pocket? Insert clamping uses a Torx T8 drive with M2.5×5.5 screws, giving secure fixation and minimised movement under cutting loads. Can these holders be used in standard turning tool posts? Yes; the holders are intended for common turning setups and provide a standard interface for indexable inserts compatible with DC--0702 geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable machining performance with an optional internal coolant channel and a right-hand cutting configuration ensures stable chip evacuation and consistent turning accuracy; supplied as a compact set of SDUCR 07 shank types. Order the Boring Bar Set directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. Boring Bar Set IPS02TM – internal coolant option, right-hand cutting (Teknik Makina) The Boring Bar Set is engineered for right-hand turning and is available with or without internal coolant to support improved chip control and prolonged tool life in a variety of turning setups. Internal coolant option available Right-hand cutting configuration Compatible with SDUCR 07 holders Practical set for turning operations Consistent turning quality through controlled coolant flow The set is built for stable metal removal where chip evacuation and coolant delivery matter. The availability of an internal coolant option guides lubricant directly to the cutting zone, reducing heat and improving reproducible surface finish. Combined with a right-hand cutting geometry and SDUCR-compatible shanks, stability at the cutting edge is increased, which translates into fewer tool changes and a better cycle-time profile in production turning. Fast insert changes and straightforward maintenance Maintenance is kept efficient thanks to standardised clamping and replaceable inserts. The tooling is compatible with the DC-- 0702 insert family, allowing quick swaps and predictable cutting performance. Service operations are simplified by the included Torx key specification and screw size for secure fixation, supporting a low-downtime workflow. The compact set construction helps reduce tool inventory while maintaining readiness for common turning tasks. Application flexibility and process reliability Designed for workshop and industrial turning tasks, this kit combines practical versatility with reliable repeatability. The set includes SDUCR 07 shank variants to suit different overhangs and setups, enabling secure mounting and consistent results. By focusing on predictable coolant management and standardised interfaces, the solution supports a controlled machining environment and improved part-to-part consistency without complex adjustments. For procurement or tailored technical advice on the Teknik Makina boring bars and coolant options, contact Metav Werkzeuge in Emmerich for expert support and reliable supply Technical Data SKU: IPS02TM GTIN: 4061905100031 Eclass: 21189217 Weight: 0.45 kg Set contents: A10J SDUCR 07, A12K SDUCR 07, A16M SDUCR 07 Facts Set diameters: 12–20 mm Pieces per set: 3 Cutting direction: right Internal coolant: yes Special features Insert type: DC-- 0702 Torx key: T8 Torx screw: M2,5x5,5 Manufacturer: Teknik Makina FAQ What shank types are included in the set? The set contains SDUCR 07 shank types listed as A10J SDUCR 07, A12K SDUCR 07 and A16M SDUCR 07 for flexible mounting and overhang options. Is internal coolant available for these bars? Yes, the IPS02TM kit offers an internal coolant option to direct lubricant to the cutting zone and improve chip evacuation. Which insert family fits the tooling? The tooling is designed for the DC-- 0702 insert family, enabling quick replacement and consistent cutting behaviour. Is the cutting geometry right-hand or left-hand? These bars are supplied in a right-hand cutting configuration suitable for standard turning directions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable machining performance arises from the combination of left-hand cutting, the option for internal coolant, and a compact three-piece configuration for small bore work; this delivers steadier cuts and improved tool life. Order the set directly via Metav Werkzeuge or request technical advice from our consultants for fitment and application support. Boring Bar Set IPS06TM — left-hand cutting, internal-coolant option (Teknik Makina) Boring Bar Set IPS06TM is a compact indexable boring bar set designed for precision bore machining and turning operations, supplied for use with DC-- 0702 indexable inserts and offering an internal-coolant option for improved chip control. Left-hand cutting direction Internal coolant option available Set of three bars for Ø12–20 mm Compatible with DC-- 0702 inserts Improved cooling and chip evacuation for longer tool life The option for internal coolant channels fluid directly to the cutting zone, reducing heat build-up and flushing chips away from the cutting edge. For interrupted cuts and bore finishing, this direct coolant supply stabilises cutting temperatures and reduces the risk of built-up edge, which in turn extends insert life and lowers regrind frequency. The combination of coolant routing and stable bar geometry supports repeatable results in serial production and prototyping alike. Consistent results in left-hand turning applications Built for left-hand cutting, the tooling geometry and clamping orientation ensure reliable engagement and accurate chip formation when reversing spindle rotation or performing specialised left-hand operations. The left-hand orientation reduces deflection where appropriate and helps maintain bore tolerances without changing feed strategies. This makes the set particularly suitable for workshop environments that handle parts requiring mirrored toolpaths or left-handed thread and bore operations. Quick insert changes and secure fastening for production uptime The set is specified for DC-- 0702 indexable inserts and includes standardized fastening details for rapid maintenance cycles. Fastening uses a Torx T8 key and M2.5x5.5 screws, enabling quick, repeatable insert clamping with minimal setup time. The clearly defined interface between bar and insert simplifies inventory management and spare-part selection, reducing downtime during tool changes and supporting efficient shift handovers. Compact three-piece set optimised for small diameters Supplied as a set of three (A10J SDQCL 07, A12K SDQCL 07 and A16M SDQCL 07), the package covers a useful small-diameter range and is light enough for easy handling at the machine, with a total weight of 0.434 kg. The set format streamlines selection for common bore sizes and allows shops to standardise on one insert family. The compact nature of the set supports cramped setups and multi-axis spindles where space is at a premium. For fast procurement and tailored technical guidance on the Teknik Makina IPS06TM, contact Metav Werkzeuge in Emmerich for expert advice and reliable supply from our European warehouse Technical Data Article number: IPS06TM Weight: 0.434 kg Contents: A10J SDQCL 07, A12K SDQCL 07 and A16M SDQCL 07 Diameter: Satz 12-20m Pieces per set: 3 Torx key: T8 Torx screw: M2.5x5.5 Compatible inserts: DC-- 0702 Cut direction: left Internal coolant: yes Facts SKU: IPS06TM eClass: 21189217 Set: yes Pieces: 3 Weight (kg): 0.434 Special features Left-hand cutting orientation Internal-coolant option (with or without coolant) Designed for DC-- 0702 indexable inserts Compact three-piece configuration for small-bore work Supplied by Teknik Makina, distributed via Metav Werkzeuge FAQ What insert type does the set accept? The IPS06TM set is specified for use with DC-- 0702 indexable inserts, allowing standardised insert sourcing and straightforward replacement. Is internal coolant fitted as standard? The tooling offers an internal coolant option; the product is available with or without coolant routing depending on the chosen version. Which cutting direction is intended for this tooling? This set is manufactured for left-hand cutting, suitable for applications that require reversed spindle rotation or mirror-image operations. How many components are included in the set? The set comprises three bars: A10J SDQCL 07, A12K SDQCL 07 and A16M SDQCL 07, covering a compact bore range. What fastening hardware is required for insert mounting? Insert clamping uses a Torx T8 key and M2.5x5.5 screws, ensuring secure and repeatable insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact combination of compatibility with common indexable inserts, an optional internal coolant path and a three-piece configuration for efficient turning operations; order the set directly via Metav Werkzeuge or consult the Metav team for tailored selection and supply. IPS22TM Boring Bar Set (with or without coolant) — Teknik Makina The IPS22TM Boring Bar Set is a three-piece collection of right-hand indexable turning holders, supplied with fastening screws and Torx keys and available with or without internal coolant for chip control in external turning applications. Indexable holders S10J, S12K, S16M Option for internal coolant Right-hand cutting direction Includes Torx keys and fastening screws Reduce setup time with standardised holders and inserts The IPS22TM is designed around indexable inserts, enabling fast insert changes and predictable cutting behaviour. Compatibility with DC-0702 and DC-11T3 insert types means the toolset uses widely available carbide grades and geometries, which reduces procurement complexity and keeps downtime to a minimum. The modular holder sizes support quick interchange between small and larger diameters, so setup time and tool inventory are both reduced. Improved chip control and tool life through coolant option Choosing the version with internal coolant improves chip evacuation and cutting stability, particularly on continuous turning cycles. Internal coolant channels help to direct lubricant precisely to the cutting edge, aiding surface finish and extending insert life. The right-hand cutting orientation provides consistent chip flow for standard lathe configurations, helping to maintain predictable process windows and repeatable results. Workshop-ready delivery to simplify commissioning Delivered as a 3-piece set with the most common shank sizes, the package includes Torx keys T8 and T15 and fastening screws M2.5x5.5 and M3.5x8.5, which allows immediate mounting and commissioning on existing tool posts. The compact set weight (approx. 0.446 kg) and consolidated selection make it suitable for service departments and small series production where space and stock rationalisation are priorities. The holders support common clamping practices and reduce the need for multiple single-item orders. Contact Metav Werkzeuge to specify the required coolant variant of the Teknik Makina IPS22TM and arrange supply directly from Emmerich for fast, reliable delivery Technical Data Article number: IPS22TM GTIN: 4061905100093 Manufacturer: Teknik Cutting Tools Weight: 0.446 kg Pieces per set: 3 Shank designations: S10J, S12K, S16M Compatible inserts: DC--0702 and DC--11T3 Cutting direction: right-hand Scope of delivery: Torx keys T8, T15; screws M2.5x5.5, M3.5x8.5 Versions: with or without internal coolant FAQ What insert types fit these holders? The holders accept standard indexable inserts of types DC--0702 and DC--11T3, ensuring compatibility with common carbide grades and geometries. Is an internal coolant option available? Yes, the set is offered with or without internal coolant; the coolant variant directs lubricant to the cutting edge for improved chip control. What is included in the set for mounting? The IPS22TM set includes fastening screws (M2.5x5.5 and M3.5x8.5) and Torx keys T8 and T15 for immediate installation. Which cutting direction is specified for the holders? The holders are configured for right-hand cutting, matching standard external turning setups. How many pieces are delivered per set? The set is a 3-piece set comprising S10J, S12K and S16M holder sizes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a modular tooling concept that combines indexable insert compatibility and an optional internal coolant option for improved chip control and longer tool life; benefit from straightforward maintenance and clear compatibility with DC--0702 and DC--11T3 inserts. Order the set directly via Metav Werkzeuge or consult the team for application-specific advice. Boring Bar Set IPS24TM — modular internal turning bars with optional coolant, by Teknik Makina The Boring Bar Set IPS24TM is a modular kit for internal turning operations, designed for workshops and production environments that require flexible, reliable tooling with the choice of internal coolant. Modular boring bars for quick change Optional internal coolant provision Compatible with DC--0702 and DC--11T3 inserts Includes Torx keys and mounting screws Increase uptime with a modular design The modular boring bars concept reduces set‑up time and simplifies inventory management. The kit contains holders in typical internal turning sizes and accepts indexable inserts such as DC--0702 and DC--11T3, enabling rapid recovery from minor tool wear by a quick insert change rather than full tool replacement. This approach leads to measurable efficiency gains on the shop floor — fewer stoppages, easier tool management and lower per‑cutting‑edge cost. The solid mounting hardware and standardised interfaces support repeatable positioning and consistent bore quality. Better process control through coolant and secure fixing Where chip evacuation and heat control are critical, the option to fit internal coolant channels offers a direct benefit to cutting stability and tool life. Internal coolant improves chip evacuation in deep boring operations and helps maintain cutting temperatures, which in turn preserves insert performance. The set also includes required fastenings and Torx keys for secure insert clamping: this reduces the risk of slippage and ensures consistent cutting behaviour during interrupted cuts or hard turning tasks. Simple handling and reliable serviceability Routine maintenance and insert changes are straightforward: the supplied mounting screws and keys match the kit’s clamping interfaces, which shortens maintenance cycles and empowers operators to perform quick, reliable swaps at the machine. The design minimises the number of unique holders required for common internal diameters, supporting leaner toolrooms and faster setup. Clear compatibility with standard insert geometries reduces the need for special‑order parts and keeps replacement lead times low. Suits workshops and production lines alike This tooling kit is suitable for general machining, repair workshops and small series production where flexibility and process reliability matter. The combination of a modular holder system and recognised insert standards offers a practical balance between precision and economy, making it a sensible choice for engineering teams seeking robust tooling without excessive complexity. For customers preferring a single supplier relationship, Metav’s platform provides convenient procurement and a tested quality filter for European distribution. Speak to Metav Werkzeuge for a tailored specification review of the IPS24TM kit and to check suitability for the intended machining tasks Technical data Article number: IPS24TM GTIN: 4061905100116 Manufacturer: Teknik Makina Facts Weight: 0.442 kg Pieces per set: 3 Set diameters: 12–20 mm Cutting direction: right Special features Insert compatibility: DC--0702 and DC--11T3 Content: S10J SDQCR 07; S12K SDQCR 07; S16M SDQCR 07 Coolant option: with or without Coolant Torx keys included: T8 and T15 Screws included: M2.5x5.5 and M3.5x8.5 FAQ Which inserts fit this boring bar kit? The kit is compatible with indexable inserts DC--0702 and DC--11T3, allowing use of common insert geometries for internal turning tasks. Is internal coolant supplied with the set? The set is available with or without coolant provision; the product description notes the option for internal coolant routing depending on the chosen configuration. What tools are included for assembly and maintenance? The package includes Torx keys T8 and T15 and the corresponding screws (M2.5x5.5 and M3.5x8.5) for secure insert clamping and straightforward servicing. Does the kit cover different bore diameters? The tooling set covers a range of internal diameters (Set diameters: 12–20 mm) with holders designed for typical internal turning operations. Who supplies the IPS24TM and who is responsible for distribution? The IPS24TM is supplied by Teknik Makina; distribution and responsibility for the European market are managed by Metav Werkzeuge GmbH Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of internal coolant, solid carbide construction and simple insert compatibility to keep small-diameter turning processes consistent and productive; order the boring bar set directly via Metav Werkzeuge or ask our consultants if needed. Bohrstange SDUC with Coolant – Solid carbide boring bar set, internal coolant (Teknik Makina) The Bohrstange SDUC with Coolant is a left-hand, solid carbide boring bar set with through-coolant for precision turning tasks using indexable DCMT 0702 inserts Solid carbide construction for high rigidity Internal coolant for stable cutting conditions Compatible with DCMT 0702 indexable inserts Left-hand orientation for specialised turning tasks Precision and consistent cutting performance The combination of solid carbide construction and internal coolant ensures stable machining at small diameters. Rigidity from the tool material reduces chatter and vibration, which in turn improves surface finish and repeatability on short-turning operations. The through-coolant channel directs coolant close to the cutting edge, helping to control temperatures and reduce thermal distortion; this is particularly useful where continuous chip evacuation is required. The design supports left-hand toolpaths and is optimised for small, precise turning work where consistency matters. Faster set-up and predictable tool handling Delivered as a compact set covering 13–16 mm diameters, the package includes E10K and E12M SDUCL 07 variants and two pieces per set, simplifying inventory and changeover. Insert retention uses a Torx assembly (key size T8) with M2.5x5.5 screws for secure and repeatable clamping; this reduces downtime during insert changes. With a nominal weight of 0.15 kg per item, the toolholder is easy to handle during set-up while remaining rigid enough for reliable cutting. The compatibility with DCMT 0702 inserts provides a broad choice of grades and geometries for finishing or light roughing tasks. Where this holder fits in the workshop This SDUCL-style toolholder is intended for precision turning operations that require a left-hand orientation and a coolant-through capability. It is well suited to compact lathes and CNC turning centres handling small-diameter workpieces where machining stability and chip control are priorities. The set format covering two diameters reduces the need for multiple single holders and supports efficient tool management in production or jobbing environments. For straightforward integration, the holder matches common indexable insert standards and standard Torx fastenings. For tailored technical advice or to secure the Teknik Makina SDUC boring bar set (SKU IPS33TM), contact Metav Werkzeuge GmbH in Emmerich by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com — our consultants will advise on integration into existing toolchains and variant selection Technical data Article number: IPS33TM Manufacturer: Teknik Makina SKU: IPS33TM Includes: E10K SDUCL 07 and E12M SDUCL 07 Set: 13–16 mm, 2 pieces per set Data Weight: 0.15 kg Diameter range: 13–16 mm Screws: M2.5x5.5 Torx key: T8 ECLASS: 21180806 Special features Material: solid carbide Internal coolant: yes Insert compatibility: DCMT 0702 Cutting direction: left-hand Package type: set FAQ Which insert type is required for this toolholder? The IPS33TM boring bar accepts DCMT 0702 indexable inserts; this type is compatible with the holder geometry and clamping method. What diameters are included in the set? The set covers the 13–16 mm range and includes two pieces (E10K SDUCL 07 and E12M SDUCL 07) for small-diameter turning. Is the coolant routed through the tool? Yes, the holder is equipped with internal coolant, delivering coolant directly to the cutting zone. What is the cutting orientation of the holder? The holder is designed for left-hand cutting direction and is intended for operations that require that orientation. Which torx key is needed for insert clamping? Insert clamping and screw replacement use a T8 Torx key and M2.5x5.5 screws. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-rigidity design with internal coolant and solid-carbide construction to improve cycle times and extend tool life; order directly via Metav Werkzeuge or consult the specialists for technical matching and delivery. Boring bar SDUC with Coolant – solid carbide set 13–16 mm (Teknik Makina) A Boring bar SDUC with Coolant designed for precision small-diameter turning where internal coolant and rigid construction reduce vibration and improve surface finish Internal coolant for reliable chip evacuation Solid carbide construction for maximum rigidity Compatible with DCMT 0702 indexable inserts Set with 13–16 mm diameters for workshop flexibility Precision for small-diameter boring that reduces rework The SDUC design combines a solid carbide shank with a compact geometry that stabilises the cutting zone during small-diameter operations. This increased stiffness minimises chatter and results in a more consistent surface finish, which reduces downstream reworking and scrap. The supplied set covering 13–16 mm diameters matches common small-bore ranges, allowing straightforward changeover between sizes. As a consequence, process reliability is improved and cycle times can be shortened where tight tolerances are required. Controlled cooling and chip evacuation to extend tool life Integral coolant feed is routed through the tool body to the cutting edge, which ensures efficient heat removal and directed chip flow. The internal coolant capability lowers thermal load on the insert seat and cutting edge, so wear is reduced and edge life is extended. For operations where surface integrity and repeatability matter, this design offers measurable gains in tool life and stable cutting conditions. The right-hand cutting orientation is intended for standard lathe cycles and is compatible with common turning strategies in production environments. Workshop compatibility and ease of maintenance The boring bar set is configured for DCMT 0702 indexable inserts and includes the items E10K SDUCR 07 and E12M SDUCR 07 in the kit, simplifying inventory and tooling planning. Fastening uses a Torx system (Torx key T8, Torx screw M2.5 x 5.5) for secure and repeatable clamping of inserts; replacement and adjustment are therefore quick and can be performed at the bench with standard tooling. The compact weight (0.15 kg per component) and set format (2 pieces per set) support ergonomic handling and efficient storage. Should any uncertainty arise regarding process fitment, technical advice is available from the Metav specialists to align the toolholder with machine capabilities and insert selection. Contact Metav Werkzeuge to discuss the Teknik Makina IPS32TM boring bar set, confirm suitability for specific turning tasks, and arrange supply from Emmerich with tailored delivery options Technical data Article number: IPS32TM Manufacturer: Teknik Makina Content: E10K SDUCR 07 and E12M SDUCR 07 Set: yes SKU: IPS32TM Facts Weight: 0.15 kg Diameter range: 13–16 mm Pieces per set: 2 Torx screw: M2.5 x 5.5 ECLASS: 21180806 Special features Internal coolant Solid carbide material Compatible with DCMT 0702 inserts Right-hand cutting direction Torx key T8 required FAQ What sizes are included in the set? The set contains diameters covering 13–16 mm and is supplied as two pieces per set. Is coolant-through capability available? Yes, the tool features internal coolant routing for improved heat control and chip evacuation. Which inserts fit this holder? This holder is designed for DCMT 0702 indexable inserts and is supplied with E10K SDUCR 07 and E12M SDUCR 07 components. What fastening hardware is required for insert installation? Insert clamping uses a Torx screw M2.5 x 5.5 and the corresponding Torx key T8. Is the design suitable for heavy interrupted cuts? The solid-carbide construction increases rigidity and provides resistance to vibration, making the assembly appropriate for many small-diameter interrupted turning tasks when matched with the correct insert grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com