Gibt es einen Hahn und Kolb Online Shop?

Technical Data: Order Number: TA045TM Item: Shim usable with Brand: Teknik Makina Numerical Representations: Weight: 0.1kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Product Information: Order Number: TA019TM Item: Shim usable with Brand: Teknik Makina Structural Details: Weight: 0.1kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Benefit from a combination of rigid clamping, precise Sandvik 5C insert compatibility and a compact 32 mm shank that promotes stable, repeatable parting operations. Order the parting clamp holder K732TM directly via Metav Werkzeuge or ask our consultants if needed. Parting Tool Clamp Holder K732TM — 32 mm shank, compatible with 5C indexable inserts (Teknik Makina) A Parting Tool Clamp Holder K732TM engineered for secure grooving and parting operations where steady clamping and insert interchangeability matter most. Robust 32 mm shank for turret stability Compatible with 5C indexable inserts (Sandvik) 5 mm maximum cutting width for narrow grooves 250 mm overall length for extended reach Stable clamping that reduces vibration and rejects chatter The holder provides a rigid clamping solution thanks to its substantial 32 mm shank and mass (1.564 kg), which together lower free‑body vibrations during cut‑off and grooving cycles. Reduced vibration directly improves surface finish and tool life; in practical terms, the stable platform shortens cycle times by enabling more consistent cuts and fewer rework passes. The listed 5 mm cutting width and 60 mm cutting height define the working envelope and help planners choose suitable inserts and depths without guesswork. Designed for productivity and easy integration into existing toolsets With a 250 mm overall length and an ISO shank profile S32S, the clamp holder integrates smoothly into standard turret and toolpost arrangements. The designation 5C-R-123 SDV provides an alternative mounting reference for workshop tooling systems, simplifying retrofits and spare‑part planning. The geometry is optimised to keep the cutting edge within the machine’s favourable rigidity zone, which means fewer adjustments at set‑up and more consistent throughput during production runs. Insert compatibility that simplifies inventory and tooling choices Accepting 5C inserts and specified as compatible with Sandvik indexable grades, the holder reduces the need for niche cutters and simplifies stocking. For teams less familiar with insert standards: “5C” denotes the insert form factor and clamping interface; matching the insert size ensures correct seat contact and secure lock‑up of the cutting edge. This interchangeability lowers procurement complexity and helps maintain uptime by using widely available inserts. Practical benefits for workshop efficiency and repeatability The component’s balance of reach, rigidity and insert compatibility supports repeatable results when parting bar stock or machining grooves. The mass and diameter work together to resist deflection during heavy cuts while the compact footprint eases access in crowded setups. The net effect is measurable: fewer rejects, less spindle load variation and a smoother production flow — attributes that matter in jobbing shops and serial production alike. Contact Metav Werkzeuge today to discuss the K732TM parting clamp holder and arrange expert advice or delivery from our Emmerich centre Technical data Article number: K732TM Manufacturer: Teknik Makina Compatible inserts: 5C Compatible insert manufacturer: Sandvik Shank designation: S32S Secondary holder designation: 5C-R-123 SDV Facts Shank diameter: 32 mm Cutting height: 60 mm Cutting width: 5 mm Overall length: 250 mm Diameter: 39 mm Weight: 1.564 kg Special features Parting clamp holder design Sandvik 5C insert compatibility ISO S32S shank profile Reference holder code 5C-R-123 SDV FAQ What insert type fits this clamp holder? The clamp holder accepts 5C indexable inserts; it is specified as compatible with Sandvik inserts and designed to secure that form factor for reliable clamping. Which shank size and profile does the holder use? The holder uses a 32 mm shank with the ISO designation S32S, making it suitable for turrets and toolposts that accept a 32 mm shank profile. What is the maximum cutting width and height supported? The tool supports a 5 mm maximum cutting width and a 60 mm cutting height, defining the practical groove and parting dimensions. Can this holder be used for heavy‑duty parting operations? The combination of a 32 mm shank, substantial mass (1.564 kg) and rigid clamp geometry makes the holder suitable for robust parting tasks; results depend on machine rigidity and cutting parameters. How does the K732TM improve repeatability on serial parts? By providing stable clamping and standardised insert seating for 5C inserts, the K732TM reduces run‑to‑run variation and supports consistent cutting conditions across batches. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise, repeatable parting operations thanks to a compact, square shank and robust clamping mechanism; the combination of a 12 × 12 mm shank, MGMN 300 compatibility and a secure M4x10 fastening delivers short setup times and reliable tool life. Order the holder directly via Metav Werkzeuge or consult the team for specification matching. Parting tool holder MGMN — 12 × 12 mm square shank, Teknik Makina The Parting tool holder MGMN is a compact, secure clamping solution for indexable parting inserts, engineered for short overhangs and consistent cut control in CNC turning applications Secure clamp for MGMN 300 inserts 12 × 12 mm shank for compact setups Includes M4x10 screw and T15 key Consistent parting accuracy for serial production A square 12 × 12 mm shank and a low-profile head deliver stable support for parting and grooving operations, which reduces chatter and increases reproducibility. The toolholder’s overall length of 125 mm and total height of 12 mm create a compact setup that is simple to position close to the workpiece; this minimises unsupported overhang and improves cutting-line stability. The measured cutting width 3 mm and maximum clamping depth of 12 mm are suitable for standard parting tasks where controlled, repeatable material separation is required. These characteristics contribute to predictable cycle times and make the holder particularly useful in small-batch production or mixed-series turning, where maintaining consistent edge engagement is crucial. Fast changeovers and secure clamping for lower downtime Changeovers are straightforward: the insert is clamped with an M4x10 screw secured using a T15 hex key, enabling quick insert replacement and minimal setup interruption. The design focuses on a positive mechanical seat rather than cosmetic finish, so the emphasis is on reliable force transmission and a tight fit between insert and clamp. Reduced setup time and secure fixation support higher machine utilisation and less scrap from misalignment. Where throughput and process stability are priorities, this toolholder’s simple mechanics provide an efficient way to keep machines running and inspection overheads low. Compatibility and integration with workshop tooling Engineered for use with MGMN 300 indexable inserts and listed compatibility with Korloy insert types, the holder conforms to an ISO 1212 style shank designation enabling straightforward integration into existing tool posts and turret stations. The item’s modest weight 0.13 kg and compact head width (12.3 mm) make it suitable for tight-tooling layouts and secondary operations. The holder is identified under SKU D013TM and the boar­d‑bar designation references 3C MGMN 300, which helps when matching clamping components or planning inventory. For workshops seeking a dependable, space-efficient parting solution that pairs with widely available insert stocks, this holder is a pragmatic choice. For procurement or technical matching of Teknik Cutting Tools holders, contact Metav Werkzeuge in Emmerich for specification support and fast supply; email info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance Technical data SKU: D013TM Item name: Parting tool holder MGMN Manufacturer: Teknik Makina Facts Shank width: 12 mm Shank height: 12 mm Cutting head width: 12.3 mm Overall length: 125 mm Total height: 12 mm Maximum clamping depth: 12 mm Cutting width: 3 mm Weight: 0.13 kg ISO designation: 1212 Special features Compatible with MGMN 300 indexable inserts Recommended insert manufacturer: Korloy Fastening screw: M4x10 Required hex key size: T15 Boar‑bar designation: 3C MGMN 300 FAQ Which inserts fit this holder? The holder accepts MGMN 300 indexable inserts; Korloy-manufactured MGMN 300 inserts are explicitly listed as compatible for straightforward procurement. What is the maximum parting depth achievable? The clamping system supports a maximum clamping/parting depth of 12 mm, matching the holder’s designed engagement for controlled separation operations. Which screw and key are required for securing the insert? Insert fastening is performed with an M4x10 socket screw and a T15 hex key, allowing quick and reliable insert changes. Is the holder suitable for compact turret stations? Yes — with a 12 × 12 mm shank, 125 mm overall length and modest weight (0.13 kg), the holder is suited to tight tooling arrangements and short overhang requirements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, robust clamp holder with a 16 x 16 mm cross-section and a 125 mm overall length for stable parting operations; its compatibility with Korloy KGMN 200 inserts ensures quick tool changes and predictable performance. Order the parting tool clamp holder directly via Metav Werkzeuge or ask our consultants if needed. KGMN Parting Tool Clamp Holder — compact 16 x 16 mm clamp for KGMN 200 inserts (Teknik Makina) The KGMN Parting Tool Clamp Holder is a compact clamp holder designed for precise parting and grooving tasks on lathes, engineered to accept KGMN 200 indexable inserts and provide secure clamping with an M4x10 clamping screw. Robust 16 x 16 mm cross-section for rigidity Compatible with Korloy KGMN 200 inserts M4x10 clamping screw with T15 hex key 125 mm overall length for stable support Stable clamping for consistent parting results A compact holder with a 16 x 16 mm cross-section provides a high stiffness-to-size ratio, reducing vibration during parting and grooving. The internal geometry positions the insert precisely, translating into repeatable cut depth and surface finish. The M4x10 clamping screw combined with the T15 key offers straightforward tightening and secure fixation; this simplicity helps maintain cycle-time efficiency in serial production while limiting setup errors. Compatibility and quick insert changes to keep machines running Designed specifically for KGMN 200 inserts from Korloy, the holder accepts the standard insert format and the 2C shank designation, enabling quick retooling with familiar indexable parts. The clamp head width of 16.2 mm ensures correct seating of the insert and reliable edge support. For workshops standardising on Korloy tooling, the holder reduces inventory complexity and shortens changeover times, which supports higher machine uptime and lower unit costs. Built for workshop practicality and durability With an overall length of 125 mm and a total height of 16 mm, the component balances accessibility at the toolpost with compact overhang to minimise chatter. The unit weighs 0.23 kg, making handling and mounting straightforward during tool set-up. The specified maximum parting depth of 16 mm and a cutting-width capacity of 2 mm mean the fixture is suitable for common parting and grooving tasks across a broad range of turned parts. Materials and finish are chosen to withstand regular use in industrial environments while keeping maintenance simple. Secure supply through Metav Werkzeuge for Teknik Makina tooling and request tailored application advice from our specialists at Metav Werkzeuge in Emmerich Technical data Article number: D017TM Manufacturer: Teknik Makina Brand designation: KGMN SKU: D017TM Fits inserts: Korloy KGMN 200 ISO designation: 1616 Facts Cross-section: 16 x 16 mm Cutting head width: 16.2 mm Overall length: 125 mm Total height: 16 mm Max parting depth: 16 mm Cutting width: 2 mm Weight: 0.23 kg Clamping screw: M4x10 Hex key: T15 Special features Compatible with 2C KGMN 200 toolholder shanks Clamp-style parting holder for grooving and parting Compact design for reduced overhang Quick and secure insert clamping Suitable for standard lathe toolposts FAQ What insert type does this clamp holder accept? The clamp holder is made to accept Korloy KGMN 200 indexable inserts; the geometry matches the KGMN profile for correct seating and support. Which screw and key are required for clamping? Clamping is performed with an M4x10 screw tightened using a T15 hex key, as specified for the unit. What are the maximum parting depth and cutting width? The holder supports a maximum parting depth of 16 mm and a cutting width of 2 mm, suitable for typical grooving and parting operations. Is the holder compatible with a 2C shank toolpost? Yes, the design corresponds to the 2C KGMN 200 shank designation, facilitating direct mounting on compatible tool posts. What is the article number for ordering and reference? Reference article number D017TM when ordering the Teknik Makina KGMN parting tool clamp holder to ensure correct supply. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a combination of precise parting performance, robust clamping and standard insert compatibility that keeps cycle times predictable and workpiece quality consistent; order via Metav Werkzeuge or consult the technical team for application advice. Stechklemmhalter — right-hand parting and grooving clamp holder with 3 mm cutting width The Stechklemmhalter is a right-hand clamp holder designed for parting and grooving tasks in turning operations, suited to shops that require compact tooling with reliable insert retention Right-hand parting and grooving holder Compatible with ISCAR 3C DGN inserts 3 mm cutting width for narrow grooves 125 mm overall length, compact design Precise cuts for consistent production yields The holder is engineered to deliver repeatable parting and grooving results by combining a narrow 3 mm cutting width with a secure clamping geometry. A narrower cutting width reduces material removal per pass, which in turn lowers cutting forces and improves surface finish; this is particularly beneficial for delicate or thin-walled components. Where process stability is critical, the controlled cutting profile reduces vibration and helps maintain dimensional accuracy throughout a production run. Rigidity and compatibility reduce downtime With a 16 mm clamping height and compact 125 mm overall length, the toolholder offers a balance of stiffness and accessibility that supports stable cutting conditions. Compatibility with ISCAR 3C DGN indexable inserts and the shank designation 3C-R DGN simplifies stock management and insert replacement, because widely used inserts can be sourced quickly. The holder’s modest mass (0.253 kg) helps with quick tool changes and minimises centrifugal effects in high-speed turning, contributing to reliable cycle times and reduced machine idle periods. Designed for straightforward integration into turning setups The parting clamp’s right-hand orientation and the ISO-related designation 1616 align with common turret and toolpost arrangements, so mounting and alignment are straightforward. The maximum plunge depth of 19 mm supports effective engagement for both through-parting and grooving operations without compromising clamping security. For workshops aiming to standardise tooling across machines, this holder offers a compact footprint and clear interface with established insert geometries, easing operator training and setup verification. For reliable right-hand parting performance, request the Teknik Makina Stechklemmhalter (SKU D760TM) via Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 for tailored application support and delivery options Technical data Article number: D760TM Manufacturer: Teknik Makina Product name: Stechklemmhalter ECLASS: 21181005 Facts Cutting width: 3 mm Maximum plunge depth: 19 mm Clamping height: 16 mm Head width: 16 mm Overall length: 125 mm Weight: 0.253 kg Special features Compatible with ISCAR Suitable for inserts: 3C DGN Shank designation: 3C-R DGN ISO designation: 1616 Cutting direction: right FAQ Which inserts are compatible with this clamp holder? The Teknik Makina Stechklemmhalter is compatible with ISCAR inserts in the 3C DGN family, using the common 3C-R DGN shank designation for secure seating and repeatable indexing. What is the maximum plunge depth for grooving operations? The holder supports a maximum plunging depth of 19 mm, which accommodates both through-parting and deeper grooving tasks while maintaining clamping stability. Is the cutting direction fixed or interchangeable? This clamp holder is produced for a right-hand cutting direction, suitable for standard right-hand turning and parting setups. What are the key dimensions that affect rigidity? Primary dimensions influencing rigidity are the 16 mm clamping height and the 125 mm overall length; combined with the compact head width, these provide a stiff mounting for stable cutting. Can the holder be used for narrow grooves and finishing cuts? Yes; the 3 mm cutting width is tailored to narrow-groove and finishing operations, reducing cutting forces and improving surface quality when used with appropriate inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from reliable, repeatable parting operations delivered by a compact, square-shank holder and a narrow 2 mm cutting width: precise grooves and stable clamping reduce rework and increase throughput. Order the parting tool holder directly via Metav Werkzeuge or consult our specialists for application advice. Parting Tool Holder D843TM — 16×16 mm shank, 2 mm blade width (Teknik Makina) A compact parting tool holder designed for accurate grooving and parting on CNC lathes and turning centres, offering a stable 16×16 mm mounting and narrow 2 mm cutting capability 16 × 16 mm square shank 2 mm cutting width for narrow grooves Max parting depth 17 mm Compatible with 2C DGM 2 inserts Stable clamping for cleaner parting cuts and longer insert life The holder is built around a standard 16×16 mm shank, giving a rigid connection to common tool posts and minimising vibration during parting operations. With an overall length of 125 mm and a mass of 0.267 kg, the assembly balances compactness and stability — a lighter holder reduces overhang while retaining sufficient support for precise cuts. This construction helps to protect the insert from shock loads, contributing to longer insert life and fewer interrupted cycles, which in turn supports consistent production quality. Narrow cutting width and controlled depth for precision grooves A 2 mm cutting width enables fine, narrow groove and parting operations where material waste must be minimised and tolerance banding is tight. The holder supports a maximum parting depth of 17 mm, allowing effective separation on a broad range of turning tasks without excessive tool overhang. These dimensions are particularly useful in high-mix environments where repeatable, close-tolerance parting is required; the reduced kerf also means less material to finish downstream, improving overall process efficiency. Compatibility and straightforward integration into workflows The toolholder accepts 2C DGM 2 inserts and is compatible with inserts from the TNGLY-OKE family, simplifying inventory and reordering. Its ISO designation 1616 indicates the standard shank interface, easing integration with ISO-style tool posts and existing tool banks. The clear match to standard insert geometries and the concise dimensional data support rapid setup and predictable machining parameters, which reduces setup time and helps maintain machine utilisation. Contact Metav Werkzeuge today to specify the Teknik Makina Parting Tool Holder D843TM for your turning applications and receive tailored guidance from our precision tooling experts. Technical data Article number: D843TM Manufacturer: Teknik Makina Overall length: 125 mm Weight: 0.267 kg ISO designation: 1616 Facts Shank dimensions: 16 × 16 mm Holder width: 16 mm Cutting head width: 16 mm Cutting width: 2 mm Max parting depth: 17 mm Special features Compatible with 2C DGM 2 inserts Compatible with TNGLY-OKE inserts Bohrstange designation: 2C-DGM 2 FAQ Which inserts are compatible with this holder? The parting tool holder accepts 2C DGM 2 inserts and is listed as compatible with TNGLY-OKE insert families, ensuring standard geometries work with the D843TM. What are the key dimensions to check for setup? Key dimensions for the D843TM are a 16×16 mm shank, 2 mm cutting width, 17 mm maximum parting depth and 125 mm overall length; weight is 0.267 kg. Is the holder suitable for ISO-style tool posts? Yes — the holder carries the ISO designation 1616, which aligns with common ISO tool-post interfaces for straightforward mounting. How deep can the D843TM cut in a single pass? The D843TM supports a maximum parting depth of 17 mm, making it suitable for typical parting and grooving tasks within that range. What shank size must the tool post accept? The tool post must accept a 16 × 16 mm square shank to mount the D843TM securely. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact holder that combines precision clamping and narrow-parting capability for efficient turning operations; its compatibility with Sandvik indexable inserts and a robust 20 mm clamp height ensures repeatable results on series production. Order directly via Metav Werkzeuge or contact the sales team for tailored advice and fast delivery from Emmerich. Parting tool holder D900TM — compact, 20 mm clamp height, right-hand cut (Teknik Cutting Tools) Parting tool holder D900TM designed for precise parting and grooving on lathes, compatible with indexable inserts from major manufacturers and optimised for stable, repeatable cuts 20 mm clamp height for stable mounting 20 mm head width for precise positioning 2 mm cutting width for narrow parting Compatible with Sandvik indexable inserts Precision and performance that improve cycle reliability The D900TM is engineered to deliver steady, repeatable results in parting and grooving operations. With a 20 mm clamp height and a 20 mm head width, the holder gives a secure platform that reduces vibration and deflection during cuts. The 2 mm cutting width and a maximum parting depth of 18 mm make this product well suited for tight, space-sensitive operations where minimal material removal is required per pass. Its 125 mm overall length and light 0.4 kg mass aid quick accelerations and minimise tool overhang, contributing to shorter cycle times and less spindle load. Broad compatibility for flexible tooling programmes Compatibility with widely used indexable inserts is a key practical advantage: the holder accepts inserts from Sandvik, and its ISO designation 2020 corresponds to standard insert sizes for parting. The shank reference 2C-123 SDV-R indicates the mounting geometry used on many tool posts, simplifying inventory management for workshops that run mixed tooling. By fitting established insert types, the device allows shops to maintain a lean tooling inventory while benefiting from proven carbide grades and chipbreaker geometries. Reduced set-up time and safer clamping A robust clamping mechanism and a compact head geometry mean quicker insert changes and fewer re‑clamps during batch runs. The design focuses on positive fixation to keep the insert seat stable under cutting forces, which reduces the risk of insert movement and improves edge life. The right-hand cutting orientation supports standard turning directions on most lathes, enabling straightforward integration into existing processes. Operators will notice reduced rework and a more predictable tool life, which supports improved throughput and lower scrap rates. Ideal applications and workshop fit The holder is especially suitable for turning centres and lathe workstations that require precise parting, grooving, and cutoff operations on medium to light-duty production runs. Its compactness and compatibility with standard inserts make it a good match for both small jobbing shops and OEM facilities seeking consistent part quality. For applications where tool change frequency and clamping reliability influence production costs, this holder provides a balanced solution that prioritises stability and straightforward maintenance. For professional advice on integrating the Teknik Cutting Tools parting tool holder into existing tooling systems, or for rapid supply from Metav Werkzeuge in Emmerich, please contact our consultants for specific technical guidance and availability Technical Data Article number: D900TM Manufacturer: Teknik Makina ECLASS: 21181005 SKU: D900TM Facts Clamp height: 20 mm Head width: 20 mm Holder width: 20 mm Cutting width: 2 mm Max parting depth: 18 mm Overall length: 125 mm Weight: 0.4 kg Special features Compatibility: Sandvik indexable inserts ISO designation: 2020 Shank reference: 2C-123 SDV-R Cutting direction: right-hand FAQ What insert types fit this holder? The parting tool holder D900TM is compatible with common ISO 2020 indexable inserts and is specified to work with inserts from Sandvik for reliable cutting performance. Is the D900TM suitable for deep grooves? The holder provides a maximum parting depth of 18 mm; for deeper grooving, a different holder geometry or special tooling should be considered. Can this holder be used on small lathes? Yes, the compact 125 mm overall length and modest 0.4 kg weight make it suitable for small to medium lathe setups that require accurate parting. Which cutting direction does the holder support? This model is configured for right-hand cutting, compatible with standard lathe turning directions on most workshop machines. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise parting and grooving performance with a compact, ISO 2020 tool shank and a narrow 3 mm cutting width for fine grooves; the robust 20 x 20 mm profile and 125 mm overall length ensure stable machining and easy integration into standard toolposts. Order directly via Metav Werkzeuge or consult our specialists for application advice. Stechklemmhalter D860TM — parting and grooving toolholder with 3 mm cutting width and 20 mm max depth (Teknik Makina) Stechklemmhalter D860TM is a compact parting and grooving toolholder designed for turning operations where tight groove control and secure insert clamping are required 3 mm cutting width for precise grooving 20 mm max cutting depth for deeper operations Compatible with GX16 indexable inserts 20 x 20 mm ISO 2020 tool shank for stable mounting Accurate groove control for repeatable results The holder delivers consistent groove dimensions thanks to its narrow 3 mm cutting width and clearly defined 20 mm max cutting depth, which together reduce rework and scrap in series production. By accepting indexable inserts the design separates cutting geometry from the holder body: insert geometry determines the cut while the holder provides rigidity. This separation enables fast insert changes and repeatable cutting performance across batches, making the tool ideal for precision turning tasks where dimensional consistency matters. Stable mounting reduces vibration and improves finish With a 20 x 20 mm shank conforming to ISO 2020 and a compact 125 mm overall length, the toolholder minimises overhang and improves torsional stiffness on the toolpost. The low mass of 0.395 kg contributes to reduced dynamic excitation during parting and grooving, which in turn helps to maintain surface quality and prolong insert life. These dimensional characteristics make the holder suitable for both small workshops and production turning centres that require a reliable, space-efficient holder. Ready for modern indexable inserts and workshop workflows The D860TM is specified for GX16 indexable inserts and is listed as compatible with inserts from Walter, facilitating straightforward procurement of replacement cutting edges. The clamp-style configuration secures the insert for high-force cuts while allowing rapid index or replacement cycles, supporting short tool-change times in mixed-shop environments. Its specification supports efficient operation in both prototype and serial production, where cutting-edge availability and integration into existing tool systems are decisive. For tailored application advice or to reserve the Teknik Makina D860TM through Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss suitability for specific turning tasks and delivery options Technical data Article number: D860TM Manufacturer: Teknik Makina Designation: Stechklemmhalter (parting and grooving toolholder) SKU: D860TM Core dimensions & performance Overall length: 125 mm Shank size: 20 x 20 mm (ISO 2020) Cutting width: 3 mm Max cutting depth: 20 mm Weight: 0.395 kg Cutting head width: 20 mm Shank height: 20 mm Compatibility & features Compatible inserts: GX16 Recommended insert manufacturer: Walter Toolholder type: clamp-type parting/grooving holder Bar designation reference: 3C GX16 FAQ Which insert type fits this holder? The D860TM accepts GX16 indexable inserts; the specification lists compatibility with inserts from Walter for fast replacement and broad availability. What are the maximum groove dimensions achievable? Maximum groove depth is 20 mm and the specified cutting width for a single-edge insert is 3 mm, providing controlled, repeatable parting and grooving. What are the shank size and length for mounting? The holder uses a 20 x 20 mm shank compliant with ISO 2020 and has an overall length of 125 mm, allowing compact mounting in standard toolposts. Is the holder suitable for production turning centres? Yes. The D860TM’s compact length and rigid 20 x 20 mm profile reduce overhang and help maintain stability in both small-batch and series production. How does the holder support quick maintenance? By using indexable GX16 inserts, the holder enables fast insert changes and consistent cutting geometry across shifts, which shortens downtime and simplifies inventory. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Achieve precise parting operations with the combination of a 25 mm shank, 4 mm cutting width and an 18 mm maximum plunge depth for reliable, repeatable groove production; order the D723TM directly via Metav Werkzeuge or consult our advisors for optimal insert pairing. Grooving clamp holder — right-hand parting holder with 25 mm shank (Teknik Makina) Grooving clamp holder designed for right-hand parting and grooving tasks, compatible with Taegutec 4C TD inserts and suitable for precision turning and finishing applications Right-hand cutting operation 25 mm shank height and width 4 mm cutting width for narrow grooves Compatible with Taegutec 4C TD inserts Consistent groove quality through controlled geometry The holder delivers consistent chip control by combining a compact head and a stable clamping design. With a 25 mm shank height and head width, the unit reduces vibration and keeps the insert in a fixed cutting position, which helps to maintain tolerances during repetitive parting operations. For users unfamiliar with tooling terminology: a larger shank cross-section increases rigidity, meaning less tool deflection and cleaner groove walls. This stability directly benefits cycle-time predictability and reduces the need for rework. Fast integration and proven insert compatibility Designed around common industry standards, the clamp accepts inserts of the 4C TD family and matches the bar designation 4C-R TD, simplifying procurement and tool setup. The ISO reference 2525 denotes the holder format, enabling straightforward replacement or pairing with existing tool systems. Using standardised components reduces downtime during changeovers and makes inventory management simpler for production planners and toolroom managers. The right-hand cutting orientation ensures compatibility with conventional lathe set-ups. Practical dimensions for narrow and deep grooving With a 4 mm cutting width and a maximum plunge depth of 18 mm, the tool is optimised for narrow slotting and light parting operations where material removal must be precise rather than aggressive. The 150 mm overall length provides sufficient reach for most toolpost arrangements while the 0.735 kg mass balances rigidity with ease of handling during set-up. For shops moving from general-purpose holders to a dedicated grooving clamp, the reduced setup complexity translates into measurable workflow improvements. Reliable supply and workshop-ready design The compact clamp is built for straightforward mounting and repeated use in industrial environments. The clamping mechanism is compatible with widely used insert geometries, making the holder a pragmatic choice for machining centres and manual lathes alike. Backed by Metav’s distribution, this component fits into a broader strategy of centralised tool supply, helping maintenance and purchasing teams to consolidate vendors without sacrificing quality. For a reliable grooving solution from Teknik Cutting Tools and fast delivery via Metav Werkzeuge, discuss the D723TM with our consultants to confirm insert selection and machine setup. Technical data Article number: D723TM Manufacturer: Teknik Makina Designation: Stechklemmhalter ISO designation: 2525 Compatible inserts manufacturer: Taegutec Compatible inserts: 4C TD Holder/bar designation: 4C-R TD Facts Shank height: 25 mm Head width: 25 mm Shank width: 25 mm Cutting width: 4 mm Maximum plunge depth: 18 mm Overall length: 150 mm Weight: 0.735 kg Cutting direction: right Special features Right-hand cutting operation Compatible with Taegutec 4C TD inserts ISO 2525 holder format Practical for narrow slotting and parting tasks FAQ What insert types fit this grooving clamp holder? The holder accepts 4C TD style inserts and is specified to match the bar designation 4C-R TD, ensuring compatibility with common Taegutec inserts. Is the D723TM suitable for heavy-duty parting? The D723TM is optimised for precision grooving and narrow parting with a 4 mm cutting width and an 18 mm maximum plunge depth; heavy-duty bulk removal is not its primary application. How does the shank size influence performance? A 25 mm shank height and width increase rigidity of the assembly, reducing tool deflection and improving repeatability in groove quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, workshop-ready holder that combines stable clamping with compatibility for Korloy inserts to streamline parting and grooving tasks. With a 25 mm head width and a maximum cutting diameter of 500 mm, this holder supports predictable chip control and reduced setup time — order directly via Metav Werkzeuge or consult our technical team for tailored advice. Parting Tool Holder D819-1TM — left-hand parting holder with 25 mm head width (Teknik Makina) The Parting Tool Holder D819-1TM is a left-hand parting and grooving clamping tool designed for turning centres requiring reliable insert retention and compact tool geometry, suited to medium-duty workshop and production use. Left-hand cutting direction 25 mm head width for stable clamping Accepts Korloy MGM 5 inserts Fits 5C‑L bar holders (350–500 mm) Stable clamping for consistent parting cuts A compact design with a 25 mm head width ensures that the holder provides a steady support platform during parting operations. The clamping arrangement has been engineered so that the insert is held securely, which reduces vibration and improves surface consistency on turned parts. With a mass of 0.713 kg, the holder is light enough for rapid tool changes yet substantial enough to dampen minor chatter, delivering predictable results in repetitive production sequences. Designed for efficient left-hand grooving Optimised for left-hand cutting, the holder accepts Korloy MGM 5 inserts and a cutting width of 5 mm, enabling clean and controlled grooves with minimal insert interference. The defined cutting height of 45 mm and a maximum parting depth of 20 mm translate into straightforward process planning: fewer insert swaps and consistent chip evacuation. This specification is particularly advantageous where cycle time and repeatability are priorities in batch turning. Quick integration with common bar holders The tool is specified to mate with 5C‑L (350–500 mm) bar holders and carries the ISO designation 2525, which allows for rapid integration into existing tool posts and bar setups. A total length of 150 mm keeps the tool footprint compact and simplifies clearance calculations for larger diameters up to 500 mm. The result is reduced set-up time and faster return to production after tool fitting or changeovers. Durable geometry built for routine workshop use Although the tool material is not listed, the geometry — including a shaft/insert projection of 25 mm and a solid clamping concept — has been designed to withstand typical turning forces while maintaining insert alignment. The holder’s specifications support reliable chip control and a straightforward replacement routine for inserts from Korloy, helping workshops sustain uptime and quality across repeated operations. Contact Metav Werkzeuge for more details on the Teknik Makina Parting Tool Holder D819-1TM and to discuss compatibility with existing machines; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: D819-1TM Manufacturer: Teknik Makina Product: Parting tool holder (Stechklemmhalter) ISO designation: 2525 Facts Head width: 25 mm Cutting width: 5 mm Cutting height: 45 mm Max. parting depth: 20 mm Total length: 150 mm Max. cutting diameter: 500 mm Nominal diameter: 350 Shaft/insert projection: 25 mm Weight: 0.713 kg Compatibility & Features Left-hand cutting direction Fits Korloy MGM 5 inserts Compatible with 5C‑L bar holders (350–500 mm) Designed for parting and grooving operations FAQ What inserts are compatible with this holder? The holder accepts Korloy MGM 5 inserts; this compatibility ensures correct seat fit and reliable clamping for parting and grooving operations. Is the cutting direction fixed or reversible? The tool is specified for left-hand cutting, so it is intended for operations that require a left-hand approach. What is the maximum parting depth? The maximum recommended parting depth is 20 mm, as indicated by the holder’s stechschwert depth specification. Can this holder be used on larger diameter workpieces? Yes, the holder supports operations up to a max. cutting diameter of 500 mm, subject to machine and setup constraints. Which bar holders does the tool fit? It is designed to fit 5C‑L bar holders (350–500 mm) and carries the ISO designation 2525 for straightforward integration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, right-hand parting solution with a 5 mm cutting width and a 25 mm head for stable grooves; compatible with Korloy MGM 5 inserts and featuring an ISO 2525 shank — order via Metav Werkzeuge or ask their consultants for application support. Parting Tool Holder D799-2TM — Right-hand parting tool holder, 5 mm cutting width (Teknik Makina) The Parting Tool Holder D799-2TM provides a compact, rigid clamping solution for turning centres, designed for precise right-hand parting and grooving operations with Korloy MGM 5 inserts. Right-hand cutting direction, stable engagement 5 mm cutting width for narrow groove operations Compatible with Korloy MGM 5 inserts ISO 2525 shank, overall length 150 mm Precision where tight grooves matter The holder delivers consistent results in narrow parting and grooving tasks thanks to its defined 5 mm cutting width and a 25 mm head that supports effective clamp contact. The 49 mm cutting height ensures correct clearance for many insert geometries, while a maximum parting depth of 25 mm is supported by the design. These measurable attributes translate into lower setup iterations and repeatable component finish — useful when cycle time and process reliability are priorities. Simple integration and proven compatibility Designed for straightforward toolroom integration, the clamping unit uses an ISO 2525 shank designation and matches the 5C-R (140-600) bar size, which simplifies selection for standard tool posts and bar holders. The holder is specified for use with Korloy MGM 5 inserts, removing ambiguity at procurement and ensuring insert seating and clamping geometry are aligned. This compatibility reduces downtime during tool changes and supports a consistent tooling strategy across a production cell. Operational range and handling benefits With an overall length of 150 mm and a rated maximum cutting diameter of 600 mm, the assembly is suitable for a broad range of lathe workpieces while remaining compact enough for confined setups. At 0.664 kg, the tool balance supports easy handling during changeovers without sacrificing the mass necessary for vibration damping in many turning scenarios. The right-hand cutting orientation is ideal for standard lathe feed directions and common CNC turning cycles. What the dimensions mean for workshop efficiency Key dimensions such as the 25 mm head width, 25 mm shaft cut length and the 49 mm cutting height are not mere numbers: they determine insert support, clamping leverage and the effective engagement of the cutting edge. Specifying these values allows engineers to predict clearance, assess interference with fixtures and match the insert grade to the application. The result is a toolholder that fits into established setups with minimal additional engineering. Contact Metav Werkzeuge for tailored technical advice and to secure supply of the Teknik Makina Parting Tool Holder D799-2TM — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: D799-2TM Manufacturer: Teknik Makina Product: Parting tool holder (Stechklemmhalter) Specifications Cutting width: 5 mm Head width: 25 mm Cutting height: 49 mm Max cutting diameter: 600 mm Max parting depth: 25 mm Shaft cut length: 25 mm Overall length: 150 mm Weight: 0.664 kg Diameter: 140 mm Shank designation: ISO 2525 Compatible inserts: Korloy MGM 5 Cutting direction: Right-hand Special features Shank/bar compatibility: 5C-R (140-600) Insert manufacturer compatibility: Korloy Application focus: Parting and grooving operations FAQ What inserts fit this tool holder? The parting tool holder is specified for Korloy MGM 5 inserts; the geometry and seating are matched to that insert series to ensure correct clamping and performance. Is the cutting direction fixed or interchangeable? This model is a right-hand parting tool holder, supplied for operations where the cutting action proceeds in the standard right-hand orientation. Which shank standard does the holder use? The shank designation is ISO 2525, and the holder suits bar setups noted as 5C-R (140-600) for straightforward mounting in compatible tool posts. What maximum diameter can be machined with this holder? The holder is specified with a maximum cutting diameter of 600 mm, indicating the envelope for safe engagement in turning operations. How deep can the parting cut be with this holder? The maximum parting depth is specified as 25 mm, which defines the allowable cutting engagement for the mounted insert. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, right-hand parting solution that combines reliable clamping, compatibility with Korloy indexable inserts and a compact 50 mm shank for easy integration into standard lathe toolposts — order the holder directly via Metav Werkzeuge or contact our consultants for machining guidance. Parting clamping holder (D792TM) — right-hand, 50 mm shank by Teknik Makina A versatile right-hand parting clamping holder designed for lathe grooving and parting tasks, compatible with MGM 5 indexable inserts and optimised for controlled chip formation. Right-hand cutting direction Compatible with MGM 5 (Korloy) inserts Max cutting diameter 80 mm Shank Ø 50 mm, overall length 150 mm Precision clamping for reliable parting performance This holder delivers stable clamping and predictable results for repetitive parting operations. The robust shank of 50 mm and overall length of 150 mm provide a steady support platform, reducing vibration during cuts. With a max cutting diameter of 80 mm and a defined cutting height of 45 mm, the toolholder is set up to maintain concentricity and repeatability in series production. The clamping concept suits turning centres that require quick insert changes and consistent alignment, which reduces setup time and rejects. Compatible insert system for controlled chip control Designed for the MGM 5 insert type and optimised for Korloy indexable grades, the holder accepts inserts with a 5 mm effective cutting width, enabling narrow, precise parting cuts. The combination of a slim cutting width and a maximum parting depth of 20 mm helps produce manageable chips and lowers the risk of workpiece restart forces. Explaining the advantage: narrower insert geometry reduces cutting forces for many common steels, improving tool life and surface finish without sacrificing process security. Practical dimensions that simplify integration The toolholder’s nominal designation 2525 and the included bar accommodation 5C-R (50-80) make it straightforward to match with standard clamping systems and bar holders. The cutting-head width of 25 mm and corresponding head height of 25 mm mean that the holder fits into common toolposts while leaving room for coolant lines and chip evacuation. At a mass of 0.721 kg, the assembly remains compact yet heavy enough to dampen minor vibrations — a useful balance for workshop environments where predictable performance matters more than excessive bulk. Benefits for workshop productivity and process reliability Adopting this parting clamp holder enhances cycle consistency and reduces rework by combining rigid geometry with standardised insert interfaces. The right-hand orientation supports conventional lathe setups and the ISO-style designation simplifies procurement and replacement planning. For buyers considering stocking or standardising holders, the compatibility with Korloy inserts and the clear numerical specifications mean fewer surprises at installation and faster tool change routines — contributing to lower downtime and reduced tooling complexity. Contact Metav Werkzeuge for tailored machining advice and to arrange supply of the Teknik Cutting Tools D792TM parting clamping holder; call +49 2822 7131930 or email info@metav-werkzeuge.com for specification matching and delivery options Technical Data Article number: D792TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina Designation: parting clamping holder Direction of cut: right Compatible inserts: MGM 5 (Korloy) Facts Shank diameter: 50 mm Overall length: 150 mm Max cutting diameter: 80 mm Cutting head width: 25 mm Cutting head height: 25 mm Cutting height: 45 mm Effective insert cutting width: 5 mm Max parting depth: 20 mm Weight: 0.721 kg ISO designation: 2525 Bar holder designation: 5C-R (50-80) Special features Right-hand parting and grooving orientation Compatible with Korloy MGM 5 indexable inserts Compact, rigid design for reduced vibration Suited for standard lathe toolposts and bar holders FAQ Which insert type fits this holder? The holder accepts MGM 5 indexable inserts and is specified for Korloy grades, ensuring compatibility with widely available insert geometries. Is the cutting direction fixed? Yes, the toolholder is configured for a right-hand cutting direction as specified in the product data. What is the maximum parting depth? The maximum suggested parting depth for this holder is 20 mm, corresponding to the clamping and insert geometry. Can this holder be used on small bench lathes? The 50 mm shank diameter and 150 mm overall length make it most suitable for standard and medium-sized lathes; compatibility should be verified with the machine’s toolpost and bar holder. What are the key dimensions for tool planning? Relevant dimensions include shank Ø 50 mm, overall length 150 mm, cutting head width 25 mm, cutting height 45 mm, and maximum cutting diameter 80 mm. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, right-hand parting solution that combines a 25 mm cutting head and a 4 mm cutting width for stable clamping and consistent parting performance. Order directly via Metav Werkzeuge or request consultancy for application-specific setup. Parting tool holder by Teknik Makina — right-hand, 25 mm cutting head, for MGM 4 inserts Parting tool holder for turning operations, designed for secure clamping of indexable inserts and reliable parting and grooving in workshop and production environments Right-hand cutting direction 25 mm cutting head width Compatible with MGM 4 inserts Max cutting diameter 80 mm Stable clamping for consistent parting performance The parting tool holder is engineered for mechanical stability: the 25 mm cutting head width and a 4 mm cutting width combine to reduce vibration during cut-off operations, which in turn helps to extend insert life and maintain repeatable results. The holder’s ISO 2525 designation and robust clamping geometry ensure that the indexable insert, such as MGM 4, is held firmly; this leads to more predictable cutting forces and fewer interrupted cycles. The right-hand cutting orientation is integrated into the design, enabling straightforward set-up for standard lathe operations. Compact design that improves workshop throughput With an overall length of 150 mm, a max cutting diameter of 80 mm and a maximum parting depth of 20 mm, the tool holder balances accessibility and cutting capacity. The moderate mass (weight 0.712 kg) supports quick tool changes without compromising rigidity. A cutting height of 45 mm and a shank-related designation of 4C‑R (60‑80) make the holder suitable for common tool posts and bar holders, so changeovers are faster and downtime is reduced. The direct consequence is improved throughput in repetitive parting tasks while keeping process control simple and measurable. Specification-led compatibility and straightforward integration Specification details such as the ISO 2525 interface and compatibility with Korloy‑type inserts (MGM 4) mean the holder integrates into existing tool inventories without modification. The shank designation 4C‑R (60‑80) clarifies mounting needs and simplifies procurement of matching boring bars or adaptors. Because the design focuses on a secure clamp and clear dimensional references, inspection and setup procedures can be standardised, which supports predictable production planning and reduces the need for frequent adjustments. Contact Metav Werkzeuge for application advice and to arrange purchase of this Teknik Makina parting tool holder; technical consultants are available at Metav Werkzeuge to confirm fitment and tooling compatibility Technical data Article number: D788TM Manufacturer: Teknik Makina Product name: Parting tool holder (translated) Facts Weight: 0.712 kg Overall length: 150 mm Cutting head width: 25 mm Cutting width: 4 mm Max cutting diameter: 80 mm Max parting depth: 20 mm Cutting height: 45 mm Shank/cutting length: 25 mm Diameter: 60 mm Special features Compatible inserts: MGM 4 Compatible insert manufacturer: Korloy ISO designation: 2525 Shank designation: 4C‑R (60‑80) Cutting direction: right FAQ Which inserts fit this holder? The holder accepts MGM 4 indexable inserts and is specified for Korloy‑type inserts, as noted in the holder’s compatibility data. What is the maximum cutting diameter for the holder? The maximum cutting diameter is 80 mm, which defines the largest workpiece diameter for safe parting operations with this holder. How deep can the parting cut be with this tool? The maximum parting or engagement depth is 20 mm, determined by the holder’s stech‑sword geometry. Which shank or bar sizes are compatible? The tool uses a 4C‑R (60‑80) shank designation; this should be matched to compatible bar or tool post adaptors for secure mounting. Is the cutting orientation fixed or reversible? This holder is designed for right‑hand cutting and is manufactured for use in right‑hand parting/grooving applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a 2 mm cutting width, a 16 mm maximum grooving depth and a compact 16 x 16 mm shank delivers precise, repeatable grooving with minimal setup time; ideal for short-run production and toolroom work. Order the grooving clamping holder directly via Metav Werkzeuge or consult our specialists for application guidance. Grooving Clamping Holder D660TM — right‑hand, 16 x 16 mm shank, 2 mm cutting width (Teknik Makina) A Grooving Clamping Holder D660TM engineered for right‑hand external grooving and profiling on lathes, compatible with Korloy 2C MGM inserts. Right‑hand cutting direction 2 mm cutting width for narrow grooves 16 mm maximum grooving depth 16 x 16 mm shank ISO 1616 Compatible with Korloy 2C MGM inserts Accurate groove control for compact components This holder provides consistent groove geometry thanks to its narrow 2 mm cutting width and defined clamping arrangement. The compact design and modest mass contribute to reduced tool overhang and improved stability, which in turn lowers the risk of chatter and dimensional drift during short, precise cuts. The result is repeatable groove profiles with less secondary finishing, making the holder suited to small shafts, collars and turned features where tolerances matter. Quick integration with common insert systems Designed to fit a standard 16 x 16 mm tool shank (ISO designation 1616) and to accept Korloy 2C MGM type inserts, the clamping system enables straightforward insert changes and straightforward stock management. The accessory designation 2C‑R MGM for the mounting bar aids selection of matching boring bars and holders. Reduced changeover time and standardised insert compatibility translate into higher spindle utilisation and simpler tooling logistics for mixed production environments. Stable performance and gentle handling of the workpiece With a total length of 125 mm and a low mass of 0.25 kg, the tool holder balances compactness with clamping security, allowing for controlled chip formation and steady cutting forces over the permitted 16 mm grooving depth. The right‑hand cutting orientation is optimised for conventional external grooving operations, and the robust clamp interface keeps the insert firmly positioned to maintain edge life and repeat accuracy across short production runs. For reliable right‑hand grooving solutions, contact Metav Werkzeuge for supply and technical advice on the Teknik Cutting Tools Grooving Clamping Holder D660TM — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: D660TM Product name: Grooving clamping holder Manufacturer: Teknik Makina Facts Overall length: 125 mm Weight: 0.25 kg Cutting width: 2 mm Maximum grooving depth: 16 mm Special features Shank designation: 1616 (16 x 16 mm) Cutting direction: right Compatible inserts: 2C MGM Compatible insert manufacturer: Korloy Boring bar designation: 2C‑R MGM FAQ What insert types fit this holder? The grooving clamping holder accepts 2C MGM style inserts and is specified for compatibility with Korloy 2C MGM parts; confirm the exact insert geometry before ordering. Is the holder suitable for left‑hand cutting? This holder is configured for right‑hand cutting only; left‑hand operations require the corresponding left‑hand holder. What is the maximum groove depth achievable? The holder supports a maximum grooving depth of 16 mm, as indicated in the technical data. What shank size is required in the tool post? The shank follows ISO 1616 (16 x 16 mm); ensure the tool post or quick‑change system accepts this profile. How long is the tool holder and how heavy is it? Total length is 125 mm and the weight is 0.25 kg, helping to minimise overhang and vibration in short‑reach operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a rigid clamp design combined with compact dimensions and proven insert compatibility to achieve consistent parting and reduced setup time; the robust construction and compatibility with Walter GX16 inserts make it a practical choice for workshop and production turning. Order or request advice directly via Metav Werkzeuge if further consultation is required. Parting Clamp Holder D858TM — compact 20 mm holder, 2 mm cutting width (Teknik Makina) The Parting Clamp Holder D858TM is a clamp-style toolholder engineered for precision parting and grooving in lathe operations, optimised for use with Walter GX16 indexable inserts. Compact clamp holder, 20 mm height and width Compatible with Walter GX16 indexable inserts Max parting depth 18 mm, 2 mm cutting width Lightweight: 0.267 kg for reduced tool overhang Precision parting with a compact, rigid holder The D858TM is designed for precise, repeatable parting tasks: the 2 mm cutting width and 18 mm parting depth enable narrow slotting and effective cut-off operations while the square cross-section (20 mm) provides a low-profile, rigid support that reduces vibration. This combination translates into improved surface finish and predictable tool life. The compact form factor supports tight setups where space on the turret or toolpost is limited, allowing shops to maintain throughput without compromising accuracy. Standard insert compatibility simplifies tooling management Compatibility with the Walter GX16 insert family and the GX16 insert size means the holder integrates into common tooling systems used across industry. Using a holder that accepts widely available indexable inserts reduces inventory variety and simplifies reordering and replacement. The holder's designation aligns with typical shank standards, which aids interchangeability and ensures predictable performance with established insert grades and geometries. Robust construction with low mass for efficient machining Manufactured for durable metalworking environments, the clamp mechanism provides a secure grip on the insert, while the overall mass of 0.267 kg keeps overhang loads low. Lower tool mass and a firm clamp reduce the risk of chatter during parting operations, which contributes to longer insert life and fewer rework cycles. The holder's build supports steady cycle times, particularly in high-volume or batch turning where consistency matters. Easy integration and quick changeover to reduce downtime Featuring an ISO-compatible holder designation (2020) and an overall length of 125 mm, the toolholder is straightforward to install on standard toolposts and turret systems. The simple clamping principle facilitates rapid insert changes and minimal alignment time, helping to keep machine downtime to a minimum. For production environments where every minute counts, the combination of standard interface and secure clamping supports lean setups and predictable changeover procedures. For procurement or technical advice on the Teknik Makina parting clamp holder, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss suitability for specific turning applications Technical data Article number: D858TM Manufacturer: Teknik Makina Product: Parting clamp holder (Stechklemmhalter) Core technical data Clamp height: 20 mm Clamp width: 20 mm Cutting width: 2 mm Max parting depth: 18 mm Overall length: 125 mm Weight: 0.267 kg ISO designation: 2020 Materials & special features Compatible with Walter GX16 indexable inserts Insert family: GX16 Holder designation / shank: 2C GX16 Intended use: parting and grooving in lathe operations FAQ Which inserts fit this holder? The holder accepts Walter GX16 indexable inserts; the designation GX16 is specified for insert compatibility. What are the maximum parting depth and cutting width? Maximum parting depth is 18 mm and the cutting width is 2 mm as stated for the D858TM. What are the holder dimensions and interface standard? Clamp height and width are both 20 mm with an overall length of 125 mm; the holder carries the ISO 2020 designation. Is the holder lightweight for reduced overhang? Yes, the holder weighs 0.267 kg, which helps to limit overhang mass and reduces potential vibration. Which manufacturer produced this item and who is the distributor? The toolholder is produced by Teknik Cutting Tools and distributed/responsible via Metav Werkzeuge GmbH; see manufacturer details below Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining high‑precision geometry with compact dimensions, this toolholder delivers stable parting and grooving performance while keeping changeover simple. Benefit from the 2 mm cutting width and 18 mm maximum plunge depth for accurate narrow cuts, and order the D728TM directly via Metav Werkzeuge or ask our consultants if needed. D728TM Parting and Grooving Toolholder — left‑hand, 2 mm cutting width (Teknik Makina) The D728TM is a left‑hand parting and grooving toolholder designed for precision narrow cuts in turning operations and for use with 2C DGN indexable inserts. Compact 20 mm toolholder height Precision 2 mm cutting width Supports 2C DGN indexable inserts Left‑hand cutting orientation Precision where narrow cuts matter The holder is optimised for operations that demand repeatable, narrow cuts: the 2 mm cutting width and 18 mm plunge depth allow secure, controlled parting and groove formation with minimal vibration. Intended for production runs and workshop use alike, the componentry provides a reliable clamping interface that maintains insert position under cut forces. Compatibility with standard indexable inserts simplifies inventory and reduces downtime compared with dedicated one‑piece cutters. Compact, stiff design for stable performance With a 20 mm nominal height, 20 mm head width and an overall length of 125 mm, the holder combines a small footprint with rigid support. The modest mass of 0.398 kg contributes to fast dynamics on the turret without compromising stability during parting. These dimensional choices reduce overhang and help maintain concentricity and surface finish, making the holder suitable for medium‑precision turning centres and smaller lathes where space and tool clearance are critical. Practical compatibility and easy integration The toolholder accepts 2C DGN indexable inserts and is specified for inserts from ISCAR, matching common workshop standards and simplifying procurement. The ISO designation 2020 and bore‑bar reference 2C‑L DGN ensure straightforward interchangeability with existing insert families. The left‑hand cutting orientation is stated clearly so the holder can be fitted to turrets and tool posts with confidence, avoiding costly setup errors and shortening the path to productive cuts. Why this holder suits a busy workshop Designed for repeatable efficiency, the holder reduces tool change frequency by using widely available inserts and offers straightforward clamping for quick insert replacement. Sourcing through Metav Werkzeuge gives access to a broad product range and a trusted supply chain; the supplier’s experienced distribution from Emmerich supports consistent availability for production schedules. The result is a compact, dependable option for accurate parting and grooving tasks in everyday machining. For precise parting and grooving, choose the Teknik Makina D728TM — contact Metav Werkzeuge for ordering or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: D728TM Manufacturer: Teknik Makina Product: Parting and grooving toolholder Facts Toolholder height: 20 mm Cutting head width: 20 mm Overall width: 20 mm Cutting width: 2 mm Max plunge depth: 18 mm Overall length: 125 mm Weight: 0.398 kg eCl@ss: 21181005 Special features Compatible inserts: 2C DGN Compatible insert manufacturer: ISCAR ISO designation: 2020 Bore‑bar designation: 2C‑L DGN Cutting direction: left FAQ What insert type fits this holder? The holder is designed for 2C DGN indexable inserts; the specification references standard inserts compatible with ISCAR families. Is the cutting orientation left‑hand or right‑hand? This toolholder is supplied in a left‑hand orientation, suitable for operations that require a left‑hand approach. What is the maximum plunge depth for grooving or parting? The maximum plunge (stech) depth is 18 mm, enabling deep groove or parting operations within that limit. Will the holder fit on compact lathes and large machines alike? With a 20 mm height and 125 mm overall length, the holder is compact enough for many small lathes while providing the stiffness required for larger turning centres when mounted correctly. What ISO designation does the holder follow? The holder uses the ISO designation 2020, referenced together with the bore‑bar marking 2C‑L DGN for consistent insert selection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, right-hand parting solution that combines precise 2 mm cutting width, a maximum parting depth of 16 mm, and compatibility with Korloy 2C MGM inserts for consistent cycle times and reduced rework. Order the tool via Metav Werkzeuge or consult the team for integration advice. Parting Tool Clamp Holder D662TM — right-hand, 20 mm head width by Teknik Makina A Parting Tool Clamp Holder D662TM designed for right-hand parting operations on lathes, compatible with Korloy 2C MGM indexable inserts and optimised for fine parting tasks. Right-hand cutting direction Supports Korloy 2C MGM inserts 2 mm cutting width for fine parting Max parting depth 16 mm, 125 mm overall length Predictable parting quality for repeatable production The holder is engineered to deliver consistent parting with a narrow 2 mm cutting width, which reduces material loss and simplifies subsequent finishing. Thanks to the defined maximum engagement of 16 mm, set-up parameters can be standardised and repeated across batches, so cycle times become more predictable and scrap rates are lowered. The ISO 2020 designation ensures that insert seating and seating angles are compatible with established toolholder standards, enabling reliable cutting geometry without guesswork. Stable geometry that reduces vibration and touch-ups Built with an overall length of 125 mm and a compact head width of 20 mm, the design balances reach and rigidity to keep chatter to a minimum. The comparatively low mass of 0.404 kg contributes to a stable assembly when mounted close to the workpiece, which improves surface finish and reduces the need for manual rework. These mechanical attributes are selected to support industrial turning environments where repeatability and tool life influence productivity. Fast integration with existing insert systems and lathe setups Compatibility with 2C MGM inserts and direct suitability for Korloy indexable parts simplifies inventory management and changeover routines. The bar designation 2C-R MGM aligns the holder with common tooling systems, so replacing inserts or switching between holders is straightforward. The right-hand cutting orientation matches standard lathe configurations, enabling quick installation into existing toolposts and immediate use in production turning tasks. The result is minimal downtime during tooling changes and a smoother workflow for machinists. For secure, production-ready parting with Korloy 2C MGM inserts, contact Metav Werkzeuge for ordering and tailored technical guidance — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: D662TM Manufacturer: Teknik Makina Designation: Stechklemmhalter ISO designation: 2020 Compatible inserts: 2C MGM (Korloy) Core technical data Overall length: 125 mm Head width: 20 mm Cutting width: 2 mm Max parting depth: 16 mm Weight: 0.404 kg Cutting direction: right Special features Compatible insert manufacturer: Korloy Insert type: 2C MGM Bar designation: 2C-R MGM FAQ What maximum parting depth does this holder allow? The maximum parting depth for the D662TM holder is 16 mm, with a defined cutting width of 2 mm for precise parting operations. Which inserts are compatible with this tool holder? The holder accepts 2C MGM indexable inserts and is specified for use with Korloy inserts meeting the ISO 2020 seating standard. Is the cutting direction right-hand or left-hand? This toolholder is configured for right-hand cutting direction in standard lathe setups. Is the D662TM suitable for series production in a workshop? Yes, the D662TM from Teknik Makina is designed for workshop and production use where repeatability and fast changeover are required Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact holder that combines precision parting, secure clamping and broad insert availability; the D865TM delivers consistent groove quality with a 2 mm cutting width and up to 18 mm cutting depth. Order the parting and grooving tool holder directly via Metav Werkzeuge or consult the technical advisors for application support. Parting and Grooving Tool Holder D865TM — 2 mm Cutting Width, GX24 Compatible (Teknik Makina) A parting and grooving tool holder D865TM engineered for stable, repeatable parting and grooving tasks in turning applications, compatible with GX24 indexable inserts and designed for reliable shop-floor performance Robust clamp design, 25 mm body width 2 mm cutting width for fine grooving Compatible with Walter GX24 inserts 150 mm overall length for reach and stability Reduce cycle variation with consistent parting performance The D865TM is designed to keep cycle times predictable by combining a rigid clamping system with a precisely defined tool geometry. The 2 mm cutting width and 18 mm maximum cutting depth allow for controlled chip formation on narrow grooves, while the 25 mm body dimensions provide lateral stability during engagement. For shops aiming to shorten set-up time and reduce rework, the result is improved process reliability and a lower scrap rate. Compatibility with established insert systems also simplifies inventory management and repeat orders. Fast insert changes and secure holding reduce downtime Equipped with a proven clamping concept and the ISO 2525 designation for the holder interface, this solution supports GX24-style inserts from established manufacturers, ensuring interchangeability and quick replacement. The holder’s 150 mm overall length and mass of 0.739 kg contribute to steady cutting behaviour without excessive vibration, which benefits surface finish and tool life. Using standardised insert types enables rapid tool swaps and consistent repeatability, so machining interruptions are minimised and throughput is maintained. Practical integration into workshop workflows The design focuses on straightforward integration into existing tool chains: the holder accepts the GX24 insert system and matches Walter insert geometries where indicated, reducing the need for custom tooling. Its compact footprint and standardised interface make it suitable for diverse lathe setups, from general maintenance to small-series production. For procurement and maintenance, sourcing via a dedicated distributor ensures spare parts and replacements are readily available, supporting uninterrupted production. Choose the Teknik Makina D865TM for precise, low-variance grooving operations and contact Metav Werkzeuge for tailored advice and fast delivery — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D865TM Manufacturer: Teknik Makina E-class: 21181005 Facts Overall length: 150 mm Body width: 25 mm Head width: 25 mm Body height: 25 mm Cutting width: 2 mm Max cutting depth: 18 mm Weight: 0.739 kg Special features Compatible insert system: GX24 Compatible insert manufacturer: Walter ISO designation: 2525 Boring bar designation: 2C GX24 FAQ What maximum cutting depth is possible with this holder? The D865TM supports a maximum cutting depth of 18 mm, allowing for deep parting and grooving operations within its geometric limits. Which insert system fits the holder? The tool holder is designed for the GX24 indexable insert system and is compatible with inserts produced by Walter where indicated. Is the holder suitable for quick insert changes? Yes, the clamping concept and ISO 2525 interface enable secure holding and efficient insert replacement to reduce machine downtime. How does the holder affect machining stability? With a 25 mm body width and a mass of 0.739 kg, the holder gives good lateral stability, which helps to minimise vibration and improve surface finish. Can the holder be used in different lathe setups? The 150 mm overall length and standardised insert interface permit integration into a wide range of lathe tool posts and boring bar arrangements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust left‑hand parting with precise clamping and narrow cutting performance for consistent cycle times on turning centres; order directly via Metav Werkzeuge or ask our consultants for application advice. Teknik Makina D874TM Parting and Grooving Tool Holder — left‑hand, 25 mm head width The Teknik Makina D874TM parting and grooving tool holder is a left‑hand clamping holder designed for precision parting and grooving operations on lathes, compatible with standard indexable inserts for economical tool changes Left‑hand cutting orientation 25 mm head width for high rigidity 2 mm cutting width for fine parting Compatible with Sandvik indexable inserts Engineered for stable parting and grooving The holder is engineered to deliver stable clamping and vibration dampening thanks to its 25 mm head and matching body dimensions. With an overall length of 150 mm and a compact mass of 0.732 kg, the assembly provides a low moment of inertia that supports repeatable parting cuts and consistent surface finish on short to medium overhangs. The left‑hand configuration reduces set‑up complexity for leftward feed directions and is particularly suited to conventional and CNC lathes where predictable chip flow and tool life extension are priorities. Narrow‑width cutting with proven insert compatibility Designed for narrow groove creation, the tool holder accepts a 2 mm cutting width and supports a maximum parting depth of 18 mm, enabling fine separation without excessive material engagement. Clamping accepts inserts specified to ISO 2525 and is listed as compatible with Sandvik indexable plates, which simplifies procurement and replacement. The secure clamping mechanism allows quick insert swaps and repeatable seat positioning, a practical advantage when minimising downtime and maintaining dimensional accuracy on batch production. Practical mounting and workshop integration Mounting to standard bore bars such as the 2C‑123 SDV‑L is straightforward, supporting fast integration into existing tool posts and bar systems. The holder’s compact footprint and standardised ISO designation make it a flexible choice across small to mid‑sized turning centres. Routine maintenance is limited to periodic torque checks on the clamping screw and inspection of insert seats; these simple procedures support long service intervals and predictable component throughput, reinforcing workshop efficiency and process stability. For precision left‑hand parting with reliable insert compatibility, contact Metav Werkzeuge for stock status and tailored advice — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: D874TM Manufacturer: Teknik Makina Eclass: 21181005 Compatible inserts: Sandvik ISO designation: 2525 Data Overall length: 150 mm Head width: 25 mm Holder width: 25 mm Holder height: 25 mm Cutting width: 2 mm Max parting depth: 18 mm Weight: 0.732 kg Special features Left‑hand cutting direction Clamping for indexable inserts Bore bar designation: 2C-123 SDV-L Suitable for precision parting and grooving FAQ What insert types fit this tool holder? The Teknik Makina D874TM parting and grooving tool holder is compatible with indexable plates to ISO 2525, and the product specification lists compatibility with Sandvik inserts. Can the holder perform full‑depth parting to 18 mm? Yes, the holder is specified with a maximum parting depth of 18 mm, enabling substantial separation cuts when used with suitable machine rigidity and insert choice. Is the cutting orientation left or right? The tool holder is configured for left‑hand cutting direction to suit leftward feed applications on lathes. Which bore bar or shank does the holder mount to? The holder is designed to mount to bar systems, referenced as 2C‑123 SDV‑L in the technical details for straightforward integration. How does the narrow 2 mm cutting width benefit production? A 2 mm cutting width permits narrow grooves and fine parting with reduced material waste and improved control of chip formation, which is beneficial for precision components and close‑tolerance separations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of a compact 20 × 20 mm clamping shank, a precise 2 mm cutting width and a 125 mm overall length to achieve stable, repeatable parting operations; order the parting tool holder directly via Metav Werkzeuge or ask our consultants if needed Teknik Cutting Tools Parting Tool Holder D844TM – 2 mm cutting width, 20 × 20 mm shank A parting tool holder D844TM intended for secure clamping of 2C DGM 2 indexable inserts, designed for precision parting and grooving on lathes 20 × 20 mm clamping shank 2 mm cutting width for fine parting 125 mm overall length for stability Compatible with 2C DGM 2 indexable inserts Precision clamping for consistent parting results The holder’s 20 × 20 mm shank and ISO 2020 designation provide a predictable interface with standard tool posts, reducing lateral play and vibration for cleaner cuts. Designed with a narrow 2 mm cutting width, the tool minimises material waste while maintaining accurate kerf dimensions, which is particularly beneficial for batch production or parts with tight tolerances. With a maximum plunge depth of 17 mm, deeper parting operations remain controlled, and the moderate mass of 0.403 kg provides sufficient inertia to steady the cut without overloading the turret. The result is consistent surface finish and reduced rework. Fast integration and reliable insert compatibility Compatibility with 2C DGM 2 indexable inserts makes set-up straightforward and repeatable: the insert pocket and clamping arrangement accept the specified insert format, enabling quick changes and predictable cutting geometry. The holder’s 125 mm overall length balances reach and rigidity, allowing use on standard lathe configurations while keeping the cutting point close to the machine centre for stability. Designed for use with inserts from manufacturers such as TNGLY-OKE, the system reduces tooling complexity and shortens downtime for insert changes, supporting efficient cycle times in production environments. Robust handling and workshop practicality Constructed for everyday lathe operations, the holder offers a secure clamping mechanism and a compact form factor that simplifies handling and storage. The moderate weight and compact dimensions reduce the load on the tool post during high-speed indexing, while the clear specification of cutting width and plunge depth helps technicians select feeds and speeds with confidence. Supplied under the Teknik Cutting Tools range and distributed via Metav Werkzeuge, the product is backed by a logistics and quality filter located in Emmerich, ensuring dependable delivery and consistent product standards for workshop and industrial use. Contact Metav Werkzeuge today for a compatibility check and secure the Teknik Cutting Tools D844TM parting tool holder to improve parting precision and operational reliability — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D844TM Manufacturer: Teknik Makina Product: Parting tool holder Facts Clamping height × width: 20 × 20 mm Cutting width: 2 mm Maximum plunge depth: 17 mm Overall length: 125 mm Weight: 0.403 kg Cutting head width: 20 mm Special features Compatible with 2C DGM 2 indexable inserts Recommended insert type: 2C DGM 2 Compatible insert manufacturer: TNGLY-OKE ISO designation: 2020 Bohrstange designation: 2C-DGM 2 FAQ Which insert type fits this holder? The holder is designed for 2C DGM 2 indexable inserts; the D844TM accepts that format and is compatible with inserts from TNGLY-OKE. What are the key dimensions to check for machine compatibility? Check the 20 × 20 mm clamping shank and the 125 mm overall length; these determine fit on the tool post and available reach. How deep can the holder cut during parting operations? The maximum plunge depth is 17 mm, which is suitable for most standard parting and grooving tasks on lathes. Is the holder suitable for quick insert changes in a production setting? Yes, the D844TM is built for repeatable insert seating and straightforward replacement, supporting fast changeovers with 2C DGM 2 inserts. Does the weight affect stability during cutting? At 0.403 kg, the holder provides enough mass to dampen minor vibrations while remaining easy to handle and mount in typical lathe tool posts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com