Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the combination of robust clamping, narrow 3 mm cutting width and system compatibility for consistent grooving performance. Order directly via Metav Werkzeuge or consult our specialists for integration advice. Grooving Insert Holder D674TM — Right‑hand Grooving Toolholder, 32 mm Head (Teknik Makina) The Grooving Insert Holder D674TM is a right‑hand toolholder designed for precise grooving and parting operations in turning applications, compatible with Korloy 3C MGM inserts 32 mm head for stable clamping 3 mm cutting width for fine grooves 20 mm maximum grooving depth Compatible with Korloy 3C MGM inserts Reliable rigidity for repeatable cuts The holder’s 32 mm head and solid construction deliver the rigidity required for repeatable operations in serial production. Mass and geometry reduce vibration during cut engagement, helping to achieve uniform edge formation and extended insert life. The design supports consistent chip control and improves dimensional stability, which translates into fewer rework cycles and higher effective uptime on the lathe. Precision grooving with a defined cutting width A fixed 3 mm cutting width provides a controlled kerf for narrow groove and parting tasks, while the 20 mm maximum grooving depth allows deeper interruptions of the workpiece where required. In practice, a defined cutting width reduces lateral tool deflection and simplifies process set‑up: the groove width corresponds to the insert geometry, so programming and quality control become more predictable. This results in cleaner part faces and less secondary finishing. Seamless compatibility for fast tool changes The toolholder is specified to accept Korloy 3C MGM inserts and follows the ISO 3232 insert designation format, which makes replacement and stock management straightforward. The shank reference 3C‑R MGM indicates the mating bore/profile for modular lathe toolposts and adaptors, ensuring straightforward mechanical fit‑up. Right‑hand cutting orientation is clearly defined for correct mounting and process planning, reducing set‑up errors and machine downtime. Practical design for workshop efficiency and safety With an overall length of 170 mm and a mass of 1.28 kg, the holder balances reach and stability for common turning centres. The clamping concept secures the insert firmly while allowing controlled, repeatable index changes; this reduces the risk of misalignment during service and supports safe operation under moderate to heavy cut conditions. The compact cutting head and standardised insert interface simplify inventory and make the holder a practical choice for both maintenance shops and small production cells. For production enquiries or integration guidance for the Teknik Makina Grooving Insert Holder D674TM, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: D674TM Brand: Teknik Makina Insert compatibility: Korloy 3C MGM ISO designation: 3232 Numbers / Core technical data Head width: 32 mm Cutting width: 3 mm Maximum grooving depth: 20 mm Overall length: 170 mm Weight: 1.28 kg Cutting direction: right Designs / Special features Shank reference: 3C‑R MGM Right‑hand grooving orientation Suitable for grooving and parting operations FAQ What insert type fits this holder? The holder accepts Korloy 3C MGM inserts; their geometry matches the ISO 3232 seat used by the Grooving Insert Holder D674TM. Is the holder suitable for left‑hand cutting? No, the D674TM is specified for right‑hand cutting direction and must be mounted accordingly. How deep can the holder cut in a single pass? Maximum grooving depth is 20 mm, which is the mechanical depth limit for the D674TM under standard conditions. Does the holder suit modular shank systems? Yes, the shank reference 3C‑R MGM identifies compatibility with corresponding 3C modular toolposts and adaptors. What are the main benefits of the 3 mm cutting width? A 3 mm cutting width gives a defined, narrow kerf for fine grooves and controlled parting, improving edge quality and repeatability with the D674TM. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from precise parting with a compact, clamped design: the holder’s 3 mm cutting width and 16 mm maximum plunge depth enable accurate, low-waste grooves while the sturdy 12 × 12 mm head and a 125 mm overall length ensure stable, repeatable results — order via Metav Werkzeuge or consult our specialists for integration assistance. Parting clamp holder (Stechklemmhalter) – Right-hand, 3 mm cutting width | Teknik Makina The Parting clamp holder (Stechklemmhalter) is a right-hand toolholder designed for precision parting and grooving applications using ISCAR 3C DGN indexable inserts. 3 mm cutting width for narrow parting Compatible with ISCAR 3C DGN inserts Robust 12 mm shank and head dimensions Right-hand orientation, 125 mm overall length Precision parting that reduces waste and rework The holder is engineered for tight, repeatable cuts: the 3 mm cutting width and 16 mm maximum plunge depth allow controlled material separation with minimal overcut. The compact profile — including a 12 mm head width and a short overall length of 125 mm — reduces overhang and improves rigidity, which translates into fewer vibrations and consistent surface finish. Compatibility with standard indexable inserts simplifies tool supply and replacement, and the defined ISO reference helps when matching holders and inserts in a production setting. Secure clamping for stable cutting and extended insert life A clamp-style design provides reliable insert retention and repeatability under cyclic loads, supporting stable cutting forces and reduced chipping. The holder’s ISO designation 1212 and the shank reference 3C-R DGN ensure straightforward pairing with corresponding toolholders and boring-bar systems. The modest mass (approximately 0.16 kg) contributes to quick tool changes and reduced spindle load, while the right-hand orientation is suitable for standard turning and parting directions on conventional lathes and CNC turning centres. Easy integration into existing machining workflows Designed to accept 3C DGN inserts from ISCAR, the toolholder streamlines procurement and inventory by matching a widely used insert format. The combination of compact dimensions and defined cutting parameters supports both rough parting operations and controlled finish cuts where wall integrity matters. For workshops seeking a balance of rigidity and accessibility, this holder offers an efficient option for narrow grooves and parting-off tasks without extensive machine modification. Contact Metav Werkzeuge to request matching inserts, verify machine compatibility or place an order for the Teknik Makina parting clamp holder — our Emmerich-based team will advise on the best setup for a reliable production flow. Technical data Article number: D758TM Manufacturer: Teknik Makina Product name: Stechklemmhalter Cutting direction: Right Facts Overall length: 125 mm Cutting width: 3 mm Maximum plunge depth: 16 mm Weight: 0.16 kg Head height: 12 mm Head width: 12 mm Holder width: 12 mm Special features Compatible inserts: 3C DGN Compatible insert manufacturer: ISCAR ISO designation: 1212 Shank designation: 3C-R DGN FAQ Which inserts fit this holder? The parting clamp holder accepts 3C DGN indexable inserts; it is specified for ISCAR-compatible inserts and the Parting clamp holder (Stechklemmhalter) is optimised for that format. What is the maximum cutting depth? Maximum plunge depth is 16 mm, which makes the holder suitable for most narrow parting and grooving operations within that limit. Is this holder right- or left-hand? This holder is configured for right-hand cutting direction; the orientation is stated in the product specification and suitable for standard right-hand turning operations. How rigid is the toolholder for heavy cuts? The compact geometry (12 mm head dimensions and 125 mm length) improves rigidity and reduces overhang; the secure clamp retention supports stable cutting and helps extend insert life under cyclic use. Can this holder be used on CNC lathes and manual lathes? Yes. The design and ISO references (1212 / 3C-R DGN) facilitate integration on both CNC turning centres and conventional lathes, provided the machine setup matches the holder’s shank and clearance requirements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of a 16×16 mm industry‑standard shank, a 3 mm cutting width and an 18 mm maximum parting depth for reliable, repeatable parting operations; order the parting clamp holder directly via Metav Werkzeuge or consult their advisors for technical specification support. Parting clamp holder D612TM — 16×16 mm square shank, left‑hand parting The parting clamp holder D612TM is engineered for left‑hand parting and grooving on lathes, accepting Korloy 3C MGM inserts to deliver consistent chip control and repeatable results across production runs. 16 × 16 mm square shank for standard tool posts 3 mm cutting width for narrow parting cuts 18 mm maximum parting depth Compatible with Korloy 3C MGM inserts Stable clamping for vibration‑free parting The D612TM combines an ISO 1616 / 16×16 mm shank with a compact overall length to ensure secure mounting in standard tool holders. A robust square shank provides predictable contact with the tool post, which reduces micro‑movement and vibration, leading to improved surface finish and extended insert life. At 125 mm overall length and 0.268 kg weight, the holder balances reach and rigidity without imposing excessive overhang; this makes it suitable for both short‑run workshops and repetitive production environments where stable clamping is essential. Precise narrow cuts and controlled depth Designed for narrow parting operations, the clamp accepts a 3 mm cutting width and permits a maximum parting engagement of 18 mm, allowing accurate slotting and cut‑off work on small to medium diameters. The left‑hand cutting orientation is matched to lathes that present the workpiece rotation for left‑hand inserts, ensuring correct cutting geometry and chip flow. By matching insert size to the cut width, the arrangement minimises deflection and maintains consistent cutting forces, which helps to achieve clean part separation and predictable cycle times. Fast insert changes and shop‑floor reliability Compatibility with Korloy 3C MGM inserts — and the corresponding 3C‑L MGM boring bar designation — means access to commonly stocked carbide inserts and established edge geometries. Standardised inserts simplify inventory management and reduce machine downtime during insert changes. The clamp‑style fixing secures the insert reliably while allowing quick replacement, supporting efficient workflows in production and repair shops. The straightforward design focuses on operational reliability: fewer adjustment steps, repeatable setup and improved uptime. For left‑hand parting tasks that demand consistent accuracy, contact Metav Werkzeuge to specify the D612TM or request tailored technical advice from their specialists via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: D612TM Manufacturer: Teknik Makina ECLASS: 21181005 Data Shank size: 16 mm × 16 mm Cutting width: 3 mm Maximum parting depth: 18 mm Overall length: 125 mm Weight: 0.268 kg Cut direction: left Special features ISO designation: 1616 Compatible inserts: Korloy 3C MGM Boring bar designation: 3C‑L MGM Application: parting / grooving on lathes FAQ Which insert type fits this holder? The holder accepts Korloy 3C MGM inserts; the clamp design secures the standard insert form for quick replacement. What shank size is required for the tool post? A 16 × 16 mm square shank (ISO 1616) is stated for mounting in standard tool posts and carriers. How deep can the holder cut in a single pass? Maximum parting engagement is 18 mm, suitable for controlled deep parting within the limits of the insert geometry. Is the orientation suitable for right‑hand turning machines? This holder is specified for left‑hand cutting; selection should match the machine’s spindle rotation and intended cutting direction. What are the typical applications for this clamp holder? Ideal for narrow parting and grooving operations on lathes where standard insert availability and quick changeover are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, left‑hand parting solution that combines precise 3 mm cutting width with robust 20 mm clamping, ensuring stable parting operations and straightforward integration into existing bar tooling; order directly via Metav Werkzeuge or consult our specialists for application advice. Parting tool clamping holder D875TM — Teknik Makina, left‑hand, 3 mm cutting width The parting tool clamping holder D875TM is a left‑hand clamping unit for grooving and parting operations, designed for compatibility with Sandvik indexable inserts and compact bar tool systems. Left‑hand cutting direction 3 mm cutting width for narrow parting Compatible with Sandvik inserts 20 mm robust clamping width Precision and rigidity for clean parting cuts The D875TM holder was developed to deliver stable parting in production and workshop environments. Its 20 mm clamping dimensions and compact geometry reduce vibration and deflection when cutting narrow parts, which translates into more consistent component diameters and longer insert life. The left‑hand orientation and 3 mm cutting width make it particularly suited to routine grooving and parting tasks where tight kerf control is required. The holder's compact overall length of 125 mm facilitates use in confined turret spaces while maintaining sufficient overhang for accessibility. Fast integration and broad insert compatibility Designed for practical set‑up, the clamping unit accepts commonly used indexable plates and is specified for use with Sandvik inserts and the bar designation 3C‑123 SDV‑L, enabling quick retrofits into existing tool routines. The ISO 2020 interface simplifies selection of matching components and reduces the need for bespoke tooling inventory. This compatibility supports streamlined changeover and minimises machine downtime — a key rational benefit for busy production lines aiming to maintain throughput and reduce tooling complexity. Reliable performance and process stability At an operating weight of 0.397 kg, the holder offers a balance of mass and manoeuvrability that helps stabilise the cutting zone without adding unnecessary inertia during turret indexing. The maximum plunge depth of 19 mm allows secure engagement for many parting depths while the solid clamping design ensures repeatable positioning and cutting height retention. These measurable attributes support predictable cycle times and make process control simpler for programmers and shop floor technicians. Workshop advantages and service confidence Beyond technical figures, this holder brings practical workshop advantages: compactness for tighter set‑ups, standard interfaces for inventory efficiency, and a robust clamping mechanism that reduces the frequency of adjustments. Metav’s presence in Emmerich acts as a quality filter for European customers, offering fast access to spare parts and expert advice. For operations seeking a dependable, easy‑to‑integrate parting solution, this clamping unit represents a rational investment in process reliability and operator confidence. Contact Metav Werkzeuge to discuss the Teknik Makina D875TM parting tool clamping holder for tailored application support and purchasing — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: D875TM Manufacturer: Teknik Makina Facts Overall length: 125 mm Weight: 0.397 kg Clamping height: 20 mm Cutting‑head width: 20 mm Holder width: 20 mm Cutting width: 3 mm Maximum plunge depth: 19 mm Cutting direction: left Special features Compatibility with Sandvik indexable inserts ISO designation: 2020 Bar/toolholder designation: 3C‑123 SDV‑L Compact design for turret integration FAQ What materials is this holder suited for? The Teknik Makina parting tool clamping holder D875TM is designed for standard turning and parting operations; material suitability depends on the chosen Sandvik insert geometry and grade. Can the holder be used for deep parting operations? The holder supports a maximum plunge depth of 19 mm; for deeper cuts, review cut planning and select appropriate insert grades for stability. Which inserts and tool bars fit the holder? The clamping unit is specified for use with Sandvik indexable inserts and is compatible with bar designation 3C‑123 SDV‑L and ISO 2020 interfaces. Is the D875TM suitable for turret use in compact lathes? Yes, the 125 mm overall length and compact 20 mm clamping dimensions make the holder suitable for machines with limited turret clearance. How does the left‑hand orientation affect installation? A left‑hand cutting direction must match the machine's spindle rotation and program direction; the D875TM is supplied for left‑hand parting applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact design that combines a 20 x 20 mm ISO shank with a narrow 3 mm cutting width for controlled, repeatable parting; the 125 mm overall length adds mounting stability while keeping the assembly lightweight and accessible — order via Metav Werkzeuge or consult our specialists for application advice. Parting clamp holder — parting and grooving toolholder, 20 x 20 mm shank, 3 mm cutting width (Teknik Makina) The Parting clamp holder is designed for secure clamping of indexable inserts in lathe parting and grooving operations, offering a compact ISO 2020 shank for stable tool post mounting. 20 x 20 mm shank, ISO 2020 3 mm max cutting width Max parting depth 20 mm Suitable for 3C DGM 3 indexable inserts Stable rigidity for precision parting The holder’s square 20 x 20 mm shank and solid construction deliver enhanced rigidity during cut-off operations, reducing chatter and improving surface finish. Because the clamping arrangement is engineered for small indexable plates, the toolholder promotes consistent chip control and repeatable parting depths. This stability translates directly into reduced rework and predictable cycle times on medium‑duty turning centres, helping maintain throughput without complex setups. Optimised compatibility and efficient tool changes Designed to accept the 3C DGM 3 family of inserts and to match TNGLY‑OKE geometries, the toolholder simplifies insert selection and replacement. The short overall length of 125 mm keeps the assembly compact on the turret, while the 3 mm cutting width allows fine control when separating workpieces or creating narrow grooves. Clear ISO designation (2020) ensures compatibility with standard toolposts, making integration into existing tool systems straightforward and minimizing downtime during changeover. Durable design for workshop use and reliable mounting Weighing approximately 0.395 kg, the holder is light enough for quick handling yet robust where it matters: the clamping mechanism secures the insert reliably for repeated operations. The maximum parting depth of 20 mm and the 20 mm head width provide sufficient engagement for common turning tasks without overcomplicating the toolset. For workshops aiming to standardise fixtures, this toolholder offers a balance of precision, longevity and uncomplicated maintenance that supports daily production demands. Request tailored advice from Metav Werkzeuge — the Teknik Makina parting clamp holder is available from our Emmerich distribution centre; contact info@metav-werkzeuge.com or call +49 2822 7131930 for technical guidance and supply options Technical Data Article number: D849TM Manufacturer: Teknik Makina Facts Shank height: 20 mm Shank width: 20 mm Cutting head width: 20 mm Cutting width: 3 mm Max parting depth: 20 mm Overall length: 125 mm Weight: 0.395 kg ISO designation: 2020 Special features Suitable for indexable inserts: 3C DGM 3 Matching insert manufacturer: TNGLY-OKE Toolholder type: parting / grooving clamp Mounting standard: ISO 2020 FAQ What inserts fit this toolholder? The holder accepts the 3C DGM 3 style indexable inserts and is specified for inserts matching TNGLY‑OKE geometries, ensuring secure seating and predictable cutting behaviour. What shank size does the toolholder use? The parting clamp holder features a 20 x 20 mm ISO 2020 shank suitable for standard toolposts on many lathes. What is the maximum parting depth? The toolholder provides a maximum parting depth of 20 mm, matching typical requirements for medium‑duty turning work. Is the toolholder suitable for narrow grooving? Yes — the 3 mm cutting width makes it appropriate for narrow grooves and precision parting tasks where minimal material loss is required. How heavy is the toolholder and does that affect handling? With a weight of around 0.395 kg, the unit is easy to handle during setup yet substantial enough to contribute to cutting stability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a 3 mm cutting width with a 20 mm clamping profile and a left-hand orientation, this grooving toolholder ensures stable parting cycles and precise insert seating for repeatable production. Order directly via Metav Werkzeuge or consult our specialists for application advice. Teknik Makina D732TM Cut-off Clamping Holder — left-hand grooving toolholder, 3 mm cutting width A D732TM cut-off clamping holder engineered for left-hand parting and grooving operations, compatible with ISCAR 3C DGN indexable inserts and optimised for stable clamping in workshop and production environments Left-hand orientation for controlled parting 3 mm cutting width for narrow grooves 20 mm clamping profile for rigidity Compatible with ISCAR 3C DGN inserts Stable clamping for consistent parting performance The toolholder delivers a mechanically rigid clamping area with a 20 mm clamping height and matching 20 mm head width, which reduces vibration and improves surface finish during parting operations. With a precise 3 mm cutting width, the holder is suited to narrow grooving and finish parting where dimensional accuracy is prioritised. The compact 125 mm overall length and modest mass (approx. 0.394 kg) allow secure mounting without excessive overhang, so runout and chatter are minimised. These measurable design choices translate into fewer rejects and more predictable cycle times on lathes and turning centres. Efficient setup and quick insert changes Designed around established insert systems, the holder accepts 3C DGN indexable inserts from ISCAR and is identified by the ISO-style designation 2020, which simplifies ordering and toolroom logistics. The shank reference 3C-L DGN indicates the connection geometry and assists engineers in matching toolposts and adaptors. Because indexable inserts are replaceable, downtime is limited to the insert change itself; the clamping concept keeps the insert seat aligned, ensuring repeatability. The left-hand cut orientation is specified for operations that require the tool to cut when travelling in a particular direction, so process planners can integrate the holder into existing turning programmes without geometry compromises. Practical benefits for workshop and production use Beyond the dimensional data, the design focuses on long-term usability: a robust clamping interface for secure insert retention, predictable cutting depth up to 20 mm, and compatibility with widely available insert types. The holder’s specifications make it appropriate for medium-duty parting and grooving tasks where stability and repeatability matter more than heavy interrupted cuts. For teams assessing tool kits, the clear numeric values — cutting width 3 mm, clamping dimensions 20 mm, overall length 125 mm — enable rapid comparison and selection, reducing procurement uncertainty and integrating smoothly into tool lists and CAM setups. For technical questions about fitment or process integration, Metav Werkzeuge’s advisers are available to assist with application matching and setup tips. For precision left-hand parting tasks, choose the Teknik Makina D732TM and contact Metav Werkzeuge in Emmerich for tailored advice and procurement support Technical Data Article number: D732TM Manufacturer: Teknik Makina ISO designation: 2020 Suitable for inserts: 3C DGN (ISCAR) Shank reference: 3C-L DGN Facts Overall length: 125 mm Clamping height: 20 mm Head width: 20 mm Shank width: 20 mm Cutting width: 3 mm Max cutting depth: 20 mm Weight: 0.394 kg Special features Left-hand orientation Compatible with ISCAR indexable inserts Designed for parting and grooving operations Compact, workshop-friendly dimensions FAQ Which insert type fits this holder? The D732TM is compatible with 3C DGN indexable inserts from ISCAR; the holder is designed to accept these inserts with secure clamping and correct seating. What is the maximum cutting depth? The maximum recommended cutting depth is 20 mm, as specified for the holder’s parting capability. Is the holder left- or right-hand? This toolholder is specified for left-hand cutting direction and is intended for applications where the cutting motion requires a left-hand orientation. What are the key dimensions to check for mounting? Essential dimensions are 20 mm clamping height, 20 mm head width, 125 mm overall length and a 3 mm cutting width; these determine compatibility with toolposts and setups. Can this holder be used for heavy interrupted cuts? The holder is optimised for stable parting and narrow grooving; heavy interrupted cuts are outside the primary design focus and should be evaluated case by case. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-stability solution for precision parting and grooving: the combination of a sturdy 20 × 20 mm shank, a narrow 3 mm cutting width and a 22 mm maximum cutting depth supports consistent results and efficient changeovers. Order the component directly via Metav Werkzeuge or request tailored advice from our consultants. Teknik Cutting Tools parting tool holder D688TM — right-hand, 3 mm blade, 20 × 20 mm shank The Teknik Cutting Tools parting tool holder D688TM is a right-hand grooving and parting clamp designed for CNC and conventional lathes where compact tool geometry and repeatable clamping are required. Compact 20 × 20 mm shank for stable clamping 3 mm parting/grooving blade width Max cutting depth 22 mm Compatible with Horn indexable inserts Stable clamping for repeatable cuts A 20 × 20 mm shank and a 20 mm head width provide a rigid interface with standard tool posts, reducing vibration and improving surface consistency during parting operations. The compact form factor is intended to be mounted in typical 20 mm tool slots, so the holder is suited for applications where a small footprint and reliable seating are essential. The design supports consistent chip control and predictable tool life when paired with appropriate indexable inserts. Precision for narrow grooves and parting tasks With a 3 mm cutting width and a 22 mm maximum parting depth, the holder is optimised for narrow-groove machining and controlled part-off operations. The narrow blade profile enables fine kerf control and minimised material waste, while the right-hand cutting orientation is specified for conventional lathe setups that require a defined feed direction. The combination of blade width and depth allows for accurate, repeatable separations without unnecessary overcutting. Efficient workshop handling and quick changeover At an overall length of 125 mm and a weight of 0.391 kg, the tool holder is light enough for straightforward handling yet long enough to reach typical workpiece envelopes on the lathe. The compatibility with Horn indexable inserts and the ISO designation 2020 simplify procurement and stocking, allowing quick replacement of cutting edges and faster set-ups. Reduced downtime follows from standardised insert mounting and familiar clamping geometry. Compatibility and application guidance The holder carries the designation 2020 and the bar reference 3C-R S229, which indicates the intended mounting form and bar type for integration into modular tool systems. The specified right-hand cutting direction should be matched to the lathe’s feed orientation. This parting clamp is therefore suitable where precise groove widths and controlled separation are required; pairing it with matching indexable inserts ensures the best combination of cutting performance and maintenance economy. Discuss the Teknik Cutting Tools parting tool holder D688TM with Metav Werkzeuge for expert advice and reliable supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D688TM Manufacturer: Teknik Makina Facts Shank size: 20 × 20 mm Cutting width: 3 mm Max parting depth: 22 mm Cutting head width: 20 mm Overall length: 125 mm Weight: 0.391 kg Cutting direction: right Special features ISO designation: 2020 Compatible with Horn indexable inserts Bar designation: 3C-R S229 FAQ Is the holder suitable for a standard 20 × 20 tool post? The parting tool holder D688TM is designed for a 20 × 20 mm shank and fits standard 20 mm tool posts with matching clamping geometry. What is the maximum parting depth with this holder? The maximum recommended parting depth is 22 mm, corresponding to the holder’s blade reach and clamp design. Which indexable inserts are compatible? This holder is compatible with Horn indexable inserts and is referenced to the ISO 2020 plate form for interchangeability. Is the cutting direction right-hand or left-hand? The tool holder is configured for right-hand cutting and should be used accordingly with the lathe feed direction. What operations is this holder intended for? The D688TM is intended for narrow grooving and parting tasks where a 3 mm kerf and controlled depth are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact geometry, dependable GX16 insert compatibility and a rigid 25 × 25 mm shank for smooth, repeatable parting operations — order via Metav Werkzeuge or consult the technical team for application-specific advice. Teknik Makina Parting Tool Holder (D861TM) — 3 mm cutting width, 22 mm max cutting depth Teknik Makina Parting Tool Holder (D861TM) is designed for precision parting and grooving in turning applications, compatible with GX16 indexable inserts and suited to both single-piece and series production 3 mm cutting width for accurate grooves Compatible with GX16 inserts by Walter Max cutting depth 22 mm for deeper cuts Consistent parting performance for series production The holder delivers a measured balance between rigidity and accessibility. With a 3 mm kerf and a max cutting depth of 22 mm, the unit is engineered to produce repeatable parting results with minimal rework. The ISO designation 2525 is applied, so the component can be integrated into standardised toolbanks. The combination of narrow cutting width and controlled depth reduces material distortion; machining forces are concentrated and managed, which helps to preserve tolerances and achieve consistent finishes across runs. Rigid 25 × 25 mm shank reduces vibration and improves tool life A solid 25 × 25 mm clamping area and a compact 150 mm overall length provide a short overhang that significantly reduces chatter compared with longer tool setups. The reduced deflection is reflected in improved edge life for replacements and stable cutting conditions for GX16 indexable inserts. At 0.74 kg, the toolholder offers a favourable mass-to-rigidity ratio that aids process stability without adding unnecessary bulk to the turret. These design choices promote longer insert life and fewer interventions during production. Fast integration into existing turning cells and straightforward set-up Compatibility with Walter-manufactured indexable inserts and the 3C GX16 bar designation simplifies stock management and reduces set-up time when changing from similar holders. The toolholder is intended for standard parting and grooving tasks and is especially suitable where compact, reliable clamping is required. The ISO-style interface allows straightforward replacement within existing tool magazines and is frequently specified where machine uptime and predictable cycle output are priorities. Contact Metav Werkzeuge for tailored application advice and availability of the Teknik Makina parting tool holder D861TM — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss GX16 insert options and delivery from Emmerich Technical data Article number: D861TM Manufacturer: Teknik Makina Facts Cutting width: 3 mm Max. cutting depth: 22 mm Clamping height: 25 mm Shank width: 25 mm Shank thickness: 25 mm Overall length: 150 mm Weight: 0.74 kg Special features Compatible inserts: GX16 Compatible insert manufacturer: Walter Toolholder ISO designation: 2525 Bar designation: 3C GX16 FAQ What insert type does the holder accept? The holder is designed for GX16 indexable inserts; insert compatibility is specified for Walter-manufactured GX16 grades. What is the maximum workable depth with this toolholder? Maximum parting depth is 22 mm, which is intended for standard parting and grooving operations in turning. Which shank dimensions ensure stable clamping? The toolholder features a 25 × 25 mm clamping profile to provide high rigidity and minimise deflection in the turret. Is the toolholder suitable for series production? Yes, the D861TM is engineered for repeatable performance and easy integration into existing toolbanks, making it suitable for series and batch production. What designation should be used when organising tooling in the toolroom? Use the ISO designation 2525 and the bar designation 3C GX16 for correct classification and replacement ordering. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine the 25 mm shank rigidity with a 3 mm cutting width and a 22 mm maximum cutting depth for dependable parting and grooving performance in small to medium turning operations. Order the parting clamp holder directly via Metav Werkzeuge or ask the consultants for compatible inserts and mounting options. Parting clamp holder D867TM — Parting tool holder, 25 × 25 mm shank, for GX24 inserts (Teknik Makina) The Parting clamp holder D867TM is a compact toolholder designed for precise parting and groove turning with Walter GX24 indexable inserts. 25 mm shank for high rigidity 3 mm cutting width for narrow parting 22 mm maximum cutting depth Compatible with Walter GX24 inserts Stable shank design for consistent parting accuracy A square 25 mm shank and matching toolhead geometry provide the structural stiffness required for repeatable parting cuts. The holder’s standardised interface (ISO 2525) ensures straightforward mounting in common cross slides and tool posts, reducing vibration and improving surface finish on separated components. This mechanical stability translates into fewer scrap parts and more predictable cycle times in batch production. Precise groove and parting performance with GX24 inserts Engineered for use with Walter GX24 indexable plates, the holder accepts a narrow 3 mm cutting width and supports a 22 mm maximum cutting depth, enabling fine-gauge parting and narrow-groove applications. The compatibility with the 3C GX24 bar designation simplifies insert selection and replacement, so tool changes are faster and tool inventory can be standardised for multiple turning tasks. Quick integration and dependable production uptime With an overall length of 150 mm and a compact, balanced layout, the clamp holder integrates easily into established turning setups while remaining robust in daily use. The tool’s listed weight of 0.74 kg facilitates secure clamping without excessive overhang, helping to maintain concentricity and repeatability. Standardised features reduce setup time and support uninterrupted machining, contributing to higher throughput across small-batch and series production. Contact Metav Werkzeuge for tailored advice on inserts, clamping accessories and mounting options — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: D867TM Manufacturer: Teknik Makina Designation: Parting clamp holder ISO designation: 2525 Compatible inserts (manufacturer): Walter Compatible insert series: GX24 Compatible bar designation: 3C GX24 Facts Overall length: 150 mm Shank height: 25 mm Shank width: 25 mm Cutting head width: 25 mm Cutting width: 3 mm Maximum cutting depth: 22 mm Weight: 0.74 kg Special features Accepts Walter GX24 indexable inserts Standardised ISO 2525 interface Suitable for narrow parting and grooving applications FAQ Which insert series fits this holder? The holder accepts GX24 indexable inserts from Walter, matching the GX24 series and the 3C GX24 bar designation. What are the key dimensions for installation? The toolholder measures 150 mm overall length with a 25 mm × 25 mm shank and a 25 mm cutting head width. What cutting width and depth are supported? This parting clamp holder is specified for a 3 mm cutting width and up to 22 mm cutting depth for narrow grooving and parting tasks. Is the mounting standardised for common toolposts? Yes, the holder uses the ISO 2525 designation for straightforward mounting in compatible toolposts and cross slides. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precise combination of stable clamping and compact geometry: the holder’s 25 × 25 mm shank and 3 mm cutting width deliver repeatable narrow-groove performance, while a 20 mm maximum cutting depth expands application range; order directly via Metav Werkzeuge or consult our specialists for integration advice. Parting/grooving clamp holder D876TM – 25 × 25 mm shank, 3 mm cutting width (Teknik Makina) The parting/grooving clamp holder D876TM is a left-hand, compact toolholder engineered for secure clamping of small grooving inserts and for precision external grooving and parting operations on turning centres. 25×25 mm shank for stable clamping 3 mm cutting width for narrow grooves Left-hand cutting direction for specific setups Compatible with Sandvik insert systems Precision and stability for narrow grooving operations A compact design that prioritises process reliability: the holder’s 25 × 25 mm shank and matching 25 mm head width provide a rigid interface with standard toolposts, which reduces vibration and improves surface finish. The clamping concept ensures repeatable insert seating, supporting consistent chip control during short-run and series production. By combining a compact footprint with robust construction, the toolholder helps maintain turning centre uptime and contributes to predictable cycle times. Application scope and machining advantages Designed for constrained work where narrow grooves or parting cuts are required, the toolholder accepts inserts from leading manufacturers and is specified for 3 mm cutting width and a 20 mm maximum grooving depth, enabling deeper cuts than many comparable compact holders. The left-hand cutting direction suits setups where tool approach and workpiece orientation necessitate counterclockwise engagement. Compatibility with common shank standards simplifies toolchange logistics and reduces setup time. Integration, handling and productivity gains With an overall length of 150 mm and a mass of 0.713 kg, the holder balances reach with low dynamic load on the turret. The ISO designation 2525 and the bohrstange reference 3C-123 SDV-L support clear specification in procurement and toolroom documentation. Where standardisation and interchangeability matter, this holder streamlines tooling lists and minimises inventory variants, delivering operational efficiency and easier maintenance planning. For procurement or technical advice on the Teknik Cutting Tools D876TM parting/grooving clamp holder, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: D876TM Manufacturer: Teknik Makina ISO designation: 2525 Compatible insert vendor: Sandvik Facts Shank height: 25 mm Shank width: 25 mm Head width: 25 mm Cutting width: 3 mm Maximum grooving depth: 20 mm Overall length: 150 mm Weight: 0.713 kg Cutting direction: left Special features Parting/grooving application Compatible with 3C-123 SDV-L toolholder interface Designed for narrow-groove and parting cuts Robust clamping for repeatable insert seating FAQ Which inserts fit the holder? The holder is specified for inserts from Sandvik; the D876TM accepts Sandvik-compatible grooving inserts and inserts with the corresponding seating form. Is the cutting direction left or right? This toolholder is configured for a left-hand cutting direction, suitable for setups requiring counterclockwise engagement. What are the shank dimensions and overall length? Shank dimensions are 25 mm × 25 mm and the overall length is 150 mm, giving a compact but stable mounting profile. What is the maximum grooving depth? The maximum specified grooving depth is 20 mm, allowing for deeper external grooves and parting operations within that limit. What is the weight and ISO designation? The toolholder weighs 0.713 kg and carries the ISO designation 2525, facilitating clear specification and ordering. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of stable clamping and a precise 3 mm cutting blade for reliable right-hand parting; the ISO 2525 compatibility and Korloy insert fit reduce setup complexity and spare part variety — order directly via Metav Werkzeuge or ask our consultants for tailored recommendations. Parting tool clamp holder D785TM — Right-hand parting holder with 3 mm blade by Teknik Makina A right-hand parting tool clamp holder engineered for precise parting and grooving on turning centres, compatible with Korloy MGM 3 inserts and designed to minimise setup time. Right-hand cutting direction Compatible with Korloy MGM 3 inserts 3 mm cutting blade width Max cutting diameter 150 mm Stable clamping for consistent parting quality The holder delivers secure clamping through a robust construction that keeps the insert steady during interrupted cuts. With a cutting blade width of 3 mm and a cutting head width of 25 mm, the design limits vibration and ensures repeatable results when parting-off or grooving. The ISO 2525 designation and the bar reference 3C‑R (110‑150) simplify allocation in tool lists and make replacement straightforward, which supports predictable cycle times and reduces scrap rates. Faster setup and reliable production flow Fast, tool-tooled changeovers are supported by the holder’s standardised interface and clear compatibility with Korloy MGM 3 inserts. The overall length of 150 mm and a compact weight of 0.73 kg balance rigidity with accessibility in tight turret stations. These measurable properties translate into shorter downtimes and fewer tool change interruptions, improving throughput without additional machine modifications. The right-hand cut orientation further aligns the holder with common turning programmes, aiding integration into existing processes. Application scope and machining limits explained Designed primarily for right-hand parting operations, the holder accepts a maximum workpiece cutting diameter of 150 mm and a maximum parting depth of 17 mm, permitting controlled separation on medium diameters. The shank and cutting geometry are arranged for stable engagement during conventional turning and parting tasks, keeping the cutting edge positionally secure and enabling consistent finish quality. For operations that require minimal inventory diversity, the compatibility with Korloy inserts reduces the need for multiple insert types and supports efficient tool management. Contact Metav Werkzeuge for expert advice on selecting the Teknik Makina D785TM parting tool clamp holder and to confirm fitment for specific turning applications — info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: D785TM Manufacturer: Teknik Makina Facts Cutting direction: right Compatible inserts: Korloy MGM 3 Cutting blade width: 3 mm Cutting head width: 25 mm Max cutting diameter: 150 mm Max parting depth: 17 mm Cutting height: 40 mm Shank/cutting length: 25 mm Overall length: 150 mm Weight: 0.73 kg Special features ISO designation: 2525 Bar designation: 3C-R (110-150) Right-hand parting orientation FAQ What inserts fit this holder? The holder accepts Korloy MGM 3 inserts; compatibility is stated in the product data for the parting tool clamp holder D785TM. What is the maximum workpiece diameter for parting with this tool? The D785TM supports a maximum cutting diameter of 150 mm, which defines the largest recommended workpiece size for standard parting operations. How deep can the holder cut in a single pass? Maximum parting depth is 17 mm, providing guidance for process planning and the selection of appropriate feeds and speeds. Is the holder suitable for left-hand cutting operations? This model is specified for right-hand cutting direction; left-hand operations require a mirror‑image holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable right‑hand parting performance is delivered by the combination of a 25 mm head width for stable support and a 3 mm cutting width for precise parting; compact 150 mm overall length enables easy integration into tight tool turrets. Order the Stechklemmhalter (D672TM) directly via (Metav Werkzeuge) or ask our consultants if needed. Stechklemmhalter — Parting tool holder, right‑hand, 25 mm head (Teknik Makina) The Stechklemmhalter is a right‑hand parting tool holder designed for precision cut‑off and slotting operations in turning applications, compatible with industry standard inserts and compact turret setups. Right‑hand cutting direction 25 mm head width for stable hold Compatible with Korloy 3C MGM inserts 18 mm maximum cutting depth Stable clamping for repeatable cut‑offs The holder is engineered to provide consistent clamping and minimal vibration during parting operations. With a 25 mm head width, the shank offers a broad support surface that reduces deflection and improves surface finish on cut faces. The 3 mm cutting width is tailored for fine parting lines where space and material waste must be minimised. Because the design concentrates rigidity at the cutting zone, cycle‑to‑cycle repeatability is enhanced, resulting in fewer reworks and a steadier production flow. Quick insert compatibility and predictable performance Compatibility with Korloy 3C MGM inserts and the matching bar designation 3C‑R MGM simplifies tooling logistics and speeds up changeovers. The holder secures the insert reliably via a clamping mechanism designed for positive seating; this reduces the risk of insert movement under load and keeps cutting forces predictable. The ISO designation 2525 points to standardised dimensions that help when replacing or specifying alternative toolholders in multi‑brand environments, allowing planners to maintain consistency across machining cells. Space‑saving design for compact turrets At 150 mm overall length the holder fits into constrained turret pockets and is suitable for machines where reach and clearance are limited. The compact footprint does not compromise on rigidity: the geometry is balanced to deliver effective chip control and repeatable parting depths. The 18 mm maximum cutting depth gives a clear boundary for application planning and ensures the holder is used within its designed capabilities, safeguarding insert life and operator expectations. Practical benefits for workshop and production planners The combination of stable support, standardised mounting dimensions and widespread insert compatibility reduces stocking complexity and speeds procurement cycles. The holder’s right‑hand orientation is compatible with standard turret arrangements and supports common machining strategies for facing and cut‑off operations. Material‑specific guidance should be considered when selecting insert grades; the holder itself is agnostic to workpiece material and focuses on reliable clamping and dimensional accuracy. For precision parting needs with Teknik Makina’s right‑hand holder (SKU D672TM), contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 to discuss availability and application advice Technical data Article number: D672TM Manufacturer: Teknik Makina Designation: Stechklemmhalter Core measurements Head width: 25 mm Cutting width: 3 mm Maximum cutting depth: 18 mm Overall length: 150 mm Weight: 0.727 kg Materials & compatibility Compatible inserts: 3C MGM Compatible insert manufacturer: Korloy Shank designation: 2525 (ISO) Bar designation: 3C‑R MGM Cutting direction: right ECLASS: 21181005 FAQ What insert type fits this holder? The holder accepts 3C MGM style inserts and is specified as compatible with Korloy grades, enabling straightforward matching of insert geometry and grade. Is the holder suitable for left‑hand cutting? This model is configured for right‑hand cutting, so left‑hand operations require the corresponding left‑hand version. What is the maximum parting depth achievable? The design specifies a maximum cutting depth of 18 mm, which should be respected to maintain clamping integrity and insert life. Can this holder be used in compact turrets? Yes; the 150 mm overall length and compact geometry make it suitable for tight turret pockets where space is limited. What shank or ISO designation does the holder follow? The toolholder follows an ISO 2525 shank designation and uses the 3C‑R MGM bar designation for mounting and compatibility checks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, right-hand parting tool holder that combines a narrow 3 mm cutting edge and a robust 25 mm shank for controlled, repeatable parting operations; order the tool directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. Teknik Makina Parting Tool Holder – right-hand, 3 mm cutting width Teknik Makina Parting Tool Holder for precision parting and grooving on lathes; designed for ZCC 3C ZT.D indexable inserts and suited to turret and tool-post installations. Right-hand parting orientation 3 mm cutting width for narrow grooves 25 mm shank height and width Compatible with ZCC 3C ZT.D inserts Consistent parting performance for production environments The holder delivers stable, repeatable cuts thanks to a rigid clamping geometry and a low-profile cutting head. The combination of a 3 mm cutting width and a maximum parting depth of 22 mm enables precise narrow-groove operations while reducing vibration and tool deflection. For workshops that prioritise throughput and component consistency, this construction reduces rework and minimises scrap rates by keeping the insert seated firmly during engagement. Robust shank and secure mounting for turret or tool-post setups A 25 mm shank height and matching width provide a substantial contact surface in the turret pocket, improving rigidity and alignment at the tool post. The 150 mm overall length balances reach and stiffness, while the holder’s mass (approx. 0.755 kg) contributes to damping without overloading the turret. The holder is manufactured to fit the 3C-R ZT-D shank designation, making it compatible with common lathe tool posts and simplifying changeover in mixed-tool setups. Indexable-insert compatibility for cost-effective machining Designed for ZCC 3C ZT.D indexable inserts and specified under ISO 2525, the holder uses replaceable cutting plates to keep tooling costs predictable and downtime short. Indexable inserts allow quick corner changes and reuse of multiple cutting edges, which is particularly beneficial for batch production. The clamping system secures the insert reliably; the result is consistent chip control and stable cutting forces when parting or grooving. Practical advantages for the workshop and maintenance teams The right-hand orientation is suited to standard turning directions and typical set-ups on conventional and CNC lathes. The holder’s simple clamp mechanism and standard interface reduce set-up time and make tool replacement straightforward for trained operators. Technical advice is available from Metav Werkzeuge if application-specific adjustments are required, ensuring that the tool integrates smoothly into existing workflows and supports a steady production rhythm. For dependable parting and short changeover times, procure the Teknik Makina parting tool holder through Metav Werkzeuge or contact our consultants at Metav Werkzeuge for tailored recommendations. Technical data Article number: D030TM Manufacturer: Teknik Makina Facts Shank height: 25 mm Cutting head width: 25 mm Holder width: 25 mm Cutting width: 3 mm Maximum parting depth: 22 mm Overall length: 150 mm Weight: 0.755 kg Cutting direction: Right Special features Compatible inserts: ZCC 3C ZT.D Shank designation: 3C-R ZT-D ISO designation: 2525 eClass: 21181005 FAQ What insert type fits this holder? The holder accepts ZCC 3C ZT.D indexable inserts; the clamping geometry is tuned for these plates to ensure stable seating and reliable chip formation. Is the toolholder suitable for CNC and manual lathes? Yes, the holder’s 25 mm shank and the 3C-R ZT-D interface make it suitable for standard turret pockets on both CNC and manually operated lathes. What is the maximum parting depth? The maximum recommended parting depth is 22 mm, which is achieved with the holder’s stable clamping and the 3 mm cutting width insert. Does the holder support left-hand cutting? This specific article is configured for right-hand cutting direction; left-hand operations require the corresponding left-hand variant. How does the holder improve tool changeover? Use of indexable inserts and a standard shank designation reduces changeover times and tooling costs, as inserts can be rotated or replaced without changing the entire toolholder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, robust grooving clamping solution that combines repeatable clamping, a 25 mm shank and a narrow 3 mm cutting width to keep cycle times predictable and scrap rates low; order directly via Metav Werkzeuge or consult Metav’s advisors for technical matching and supply. Grooving clamping holder K624TM by Teknik Makina — 25 mm shank, 3 mm cutting width The Grooving clamping holder K624TM is designed for precision grooving and parting operations in turning applications, accepting standard 3C indexable inserts and engineered for stable clamping in light to medium-duty production environments. 25 mm shank for standard toolholders 3 mm cutting width for precise grooves Compatible with 3C indexable inserts 200 mm overall length for reduced deflection Precision grooves with consistent cutting performance The holder delivers a defined cutting geometry thanks to its 3 mm cutting width and 50 mm cutting height, which together enable narrow, repeatable grooves and accurate parting lines. The combination of a compact cutting edge and a stable clamping arrangement reduces chatter and makes it easier to maintain tolerances over multiple cycles. For workshops seeking predictable throughput, the holder’s configuration supports efficient tool change routines with indexable inserts, keeping downtime to a minimum while preserving surface quality. Rigid design that minimises vibration and deflection Built around a 25 mm shank and a body diameter of 34 mm, the toolholder is dimensioned to resist bending in typical lathe settings. The 200 mm overall length provides reach without excessive overhang, so setup rigidity is retained for short-to-mid-length turned parts. The unit’s mass (0.766 kg) contributes to a stable cutting platform; when clamped correctly in a suitable toolblock, the assembly offers dependable edge engagement and longer insert life through reduced dynamic load. Compatibility and simple integration into existing toolchains The holder accepts 3C indexable inserts and is listed with the ISO shank designation S25R, matching common toolpost and turret interfaces. The alternative designation 3C‑R S229 provides a further reference for matching spare inserts and clamp parts. This makes replacement and stocking straightforward: workshops can keep a small inventory of inserts and change components quickly, improving turnaround between jobs and enabling flexible machining of varied component geometries. Production benefits and shop-floor reliability By prioritising stable clamping and standardised interfaces, the holder supports shorter setup times and consistent cycle outputs. The design is particularly suited to environments where repeatability and low scrap rates matter; the controlled groove width and robust mounting reduce rework and aid quality assurance processes. Where routine efficiency and predictable production flow are priorities, this toolholder contributes to leaner machining sequences and reliable part geometry control. Speak to Metav Werkzeuge's specialists to confirm suitability for specific turning operations or to request a technical quotation for the Teknik Makina grooving clamping holder K624TM — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K624TM Weight: 0.766 kg Diameter: 34 mm Data Shank diameter: 25 mm Cutting height: 50 mm Cutting width: 3 mm Overall length: 200 mm Special features For indexable inserts: 3C ISO shank designation: S25R Holder model reference: 3C-R S229 FAQ What insert type fits this holder? The grooving clamping holder K624TM accepts 3C indexable inserts; the designation 3C-R S229 is given as an additional holder reference for matching inserts and clamp parts. Is the holder suitable for long overhangs? With a 200 mm overall length and a 25 mm shank, the K624TM is best used with limited overhang; it is optimised for short-to-mid reach to maintain rigidity and reduce deflection. How does the shank designation affect installation? The ISO shank designation S25R indicates compatibility with toolposts and turrets designed for 25 mm shanks, simplifying integration into common lathe toolholders. What are the main benefits on production lines? Stable clamping, a defined 3 mm cutting width and a compact geometry reduce cycle variability and rework, supporting predictable throughput and consistent groove quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precise, rigid clamping system combined with broad compatibility for reliable grooving operations; the robust design, modest weight and standard shank reduce setup time and support stable parting and grooving. Order or request advice via Metav Werkzeuge for rapid supply and application guidance. Grooving clamping holder K663TM – 20 mm shank, 3 mm cutting width (Teknik Makina) A grooving clamping holder K663TM designed for turning and grooving applications, compatible with Korloy KGEVR‑KGMN 300 indexable inserts and standard toolholders Secure clamping for KGMN indexable inserts 20 mm shank for standard tool posts 3 mm cutting width for narrow groove work 150 mm overall length for stable reach Precision where it matters: guaranteed insert compatibility and alignment The holder is engineered for consistent positioning of KGEVR‑KGMN 300 style inserts, delivering repeatable geometry for groove and parting operations. With a 20 mm shank and an ISO shank designation S20M 3C, the device integrates with common turret and toolpost systems, permitting direct replacement without adapter work. The combination of precise clamping and proven insert interface reduces indexing deviation and supports high repeatability in series production. Stable cutting performance through rigid design and measured dimensions A compact mass of 0.37 kg and a balanced 150 mm overall length limit deflection during interrupted cuts. The 3 mm cutting width and 45 mm cutting height (insert engagement range) allow controlled chip formation in narrow grooves, while a 25 mm nominal diameter contributes to lateral stiffness. This balance of dimensions supports efficient metal removal with reduced chatter, especially on short overhangs and moderate depths of cut. Faster set-up and predictable tool life for shop efficiency Clamping geometry aligned to the KGMN family simplifies insert changes and shortens downtime. The S20M 3C shank designation ensures immediate recognition during tool preparation and inventory management. By using a standardised holder and compatible Korloy inserts, shops benefit from predictable tool life and fewer unforeseen adjustments, supporting steady throughput and lower process variance. Practical suitability for workshop environments and simple maintenance The holder’s straightforward clamping mechanism and accessible interface with KGEVR‑KGMN 300 inserts permit quick maintenance and low-complexity spare-part management. Lightweight construction eases handling during tool changes, while robust mating surfaces maintain alignment over repeated cycles. For operations requiring reliable narrow-groove work, this toolholder offers a pragmatic blend of performance and serviceability, suited to general turning shops and production lines. Contact Metav Werkzeuge for application advice, precise fit checks and reliable delivery from Emmerich – phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: K663TM Manufacturer: Teknik Makina Product: Grooving clamping holder (Stechklemmhalter) Compatible inserts: KGEVR-KGMN 300 (Korloy) Clamping designation: KGMN Shank designation: S20M 3C Numbers / Core technical data Shank diameter: 20 mm Cutting height: 45 mm Cutting width: 3 mm Weight: 0.37 kg Diameter: 25 mm Overall length: 150 mm Special features / Versions Suitable for KGMN indexable inserts Compatible with Korloy insert series Standardised shank for straightforward integration FAQ What inserts fit this holder? The grooving clamping holder accepts KGEVR‑KGMN 300 style indexable inserts; Korloy inserts of that designation are specified for direct compatibility. What shank size is required for installation? The holder uses a 20 mm shank (S20M 3C), designed to fit standard toolposts and turret slots compatible with that shank diameter. Is the holder suitable for narrow groove cutting? Yes, the 3 mm cutting width is intended for narrow grooving and parting tasks where a slim cut width is required. How long is the holder and how does that affect stiffness? With an overall length of 150 mm, the holder provides a balance between reach and rigidity; its modest mass contributes to reduced deflection in short-to-medium overhang setups. Can the same holder be used for different insert manufacturers? The holder is specified for the KGMN family; compatibility with other manufacturers depends on exact insert geometry, but Korloy KGEVR‑KGMN 300 inserts are the intended match. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable solution that combines precise 3 mm cutting width, secure clamping on a 16 mm shank and broad compatibility with ISCAR 3C inserts for reliable groove and parting operations — order directly via Metav Werkzeuge or consult the technical team for tailored advice. Stechklemmhalter K700TM — Parting and grooving clamping holder, 16 mm shank, 3 mm cut width (Teknik Makina) The Stechklemmhalter K700TM is a dedicated parting and grooving clamping holder designed for indexable 3C inserts, suitable for workshop and light industrial turning applications where repeatable, tight grooves and secure cut-off operations are required Precise 3 mm cutting width for tight grooves 16 mm shank compatible with S16Q holders Accepts ISCAR 3C indexable inserts 180 mm total length for secure reach Accurate groove geometry with minimal setup The holder delivers a consistently controlled cutting profile thanks to its defined 3 mm cutting width and elevated 45 mm cutting height, which together establish a reliable datum for groove depth and edge engagement. In practical terms, this reduces setup iterations and scrap rates during serial production because dimensional stability is improved. The combination of a narrow cut and stable cutting height allows predictable chip formation and repeatable parting operations, which directly supports shorter cycle times and more efficient machine use. Rigid mounting and compatibility for improved process stability With a 16 mm shank and ISO designation S16Q, the toolholder is built for secure clamping in standard toolposts and bar holders. The 180 mm total length gives sufficient reach without compromising stiffness when positioned correctly. Compatibility with ISCAR 3C inserts and the 3C-R GRP holder variant ensures a broad selection of indexable cutting edges and geometries, allowing optimisation for materials and finishing requirements. The defined interface guarantees fast insert changes and consistent seating, which cuts downtime and simplifies tool inventory management. Workshop efficiency and low-hassle handling At just 0.308 kg, the assembly is light enough for straightforward handling during tool changes yet engineered for stability in everyday turning tasks. The use of indexable inserts means only the cutting tips require replacement, lowering ongoing tooling costs and making routine maintenance quick. For workshops seeking a pragmatic upgrade path, the holder’s design helps reduce total tool change time and keeps skilled operators focused on production rather than frequent tool rework — a direct contribution to throughput and predictable lead times. For specific machining advice on Teknik Makina’s K700TM and prompt supply from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge by phone at +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com Technical Data Article number: K700TM Name: Stechklemmhalter Manufacturer: Teknik Makina Compatible inserts manufacturer: ISCAR Compatible insert type: 3C Facts Shank diameter: 16 mm Cutting height: 45 mm Cutting width: 3 mm Diameter: 21 mm Total length: 180 mm Weight: 0.308 kg Special features Bohrstange designation (ISO): S16Q Holder variant: 3C-R GRP Suitable for 3C indexable inserts FAQ What insert type fits this holder? The holder is designed for 3C indexable inserts and listed compatibility includes ISCAR as the insert manufacturer for the K700TM. Can the holder be mounted in standard toolposts? Yes. The 16 mm shank with ISO code S16Q enables secure mounting in standard toolposts and bar holders designed for that shank size. What groove width and height does the holder provide? The tool provides a 3 mm cutting width and a 45 mm cutting height, offering a defined geometry for precise parting and grooving operations. Is the K700TM suitable for serial production? The design, combined with indexable inserts, supports repeatable results and reduced setup time, making it suitable for serial production environments where consistent groove quality is required. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Precision parting and secure clamping are offered by a compact toolholder that combines a 3 mm cutting width, 25 mm shank and a 200 mm overall length to deliver stable performance and reach for shop-floor turning operations; order the parting clamp holder directly via Metav Werkzeuge or ask the consultants for a tailored specification. Parting clamp holder K673TM — 3 mm cutting width, 25 mm shank, Teknik Makina The Parting clamp holder K673TM is a robust clamping tool designed for precision parting and grooving with indexable 3C inserts, compatible with ISCAR insert geometries and common S25R shank systems. Compatible with ISCAR 3C inserts 25 mm shank diameter, fits S25R holders 3 mm cutting width for narrow parting 200 mm overall length for deep reach Reliable narrow cuts with consistent chip control The compact clamping head is engineered around a 3 mm cutting width, which enables narrow parting cuts with reduced material waste and improved cycle time compared with wider cutters. This narrow tool geometry, combined with the specified 3C insert format, supports controlled chip formation and easier evacuation in turning operations. The result is a more repeatable cut quality and predictable tool life, which benefits batch production and minimises rework. Stable mounting and extended reach for workshop flexibility A 25 mm shank diameter and S25R-compatible configuration ensure secure mounting in common toolposts and turret systems. The holder’s 200 mm overall length provides additional reach for deeper job setups without sacrificing rigidity. These attributes reduce chatter and enhance surface integrity on the workpiece, allowing the tool to be used across a wider range of lathe applications while keeping set-up times short. Secure clamping and insert compatibility for predictable performance Designed to accept 3C inserts and listed as compatible with ISCAR, the holder features the model designation 3C-R DGN for easy cross-referencing during procurement. The architecture of the clamp and seat delivers firm insert support; the assembly’s mass (approximately 0.798 kg) contributes to vibration damping during cut-off operations, which improves finish and extends insert life. This mechanical stability is especially helpful when working with tougher alloys or longer overhangs. Practical integration into production workflows The toolholder’s 40 mm cutting height and a nominal 31 mm diameter at the head provide clear reference dimensions for programming and fixture planning. Lightweight yet sturdy, the holder simplifies changeovers and inventory management when paired with standard 3C inserts. For manufacturing environments aiming to increase throughput without complex retooling, the holder offers a pragmatic balance of performance, compatibility and straightforward handling that supports dependable daily use. For procurement or application advice on the Teknik Makina K673TM parting clamp holder, contact Metav Werkzeuge for expert guidance and swift delivery from Emmerich. Technical data Article number: K673TM Manufacturer: Teknik Makina Compatible insert manufacturer: ISCAR Insert type: 3C Shank designation: S25R Model designation: 3C-R DGN Core data Shank diameter: 25 mm Cutting height: 40 mm Cutting width: 3 mm Head diameter: 31 mm Overall length: 200 mm Weight: 0.798 kg eCl@ss: 21181005 Features Compatible with ISCAR 3C inserts Suitable for precision parting and grooving Robust clamp design for stable insert support Designed for use in standard S25R toolholders FAQ Which insert type fits this holder? The holder accepts 3C indexable inserts; compatibility with ISCAR insert geometries is specified for the K673TM toolholder. What shank size and holder standard does it use? The toolholder is supplied with a 25 mm shank and is configured for the S25R shank standard. How long is the parting clamp holder and what reach does it provide? The overall length is 200 mm, offering extended reach for deeper parting and grooving tasks. What is the cutting width and why is that beneficial? A 3 mm cutting width allows narrow parting cuts that reduce material loss and can improve cycle time and chip control. What is the mass of the holder and how does that affect performance? The holder weighs approximately 0.798 kg, which helps damp vibrations and contributes to a steadier cut during parting operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact holder that combines secure clamping, narrow-groove capability and robust reach for reliable turning operations; the holder’s 32 mm shank and 3 mm cutting width support precise parting and grooving while the 250 mm overall length simplifies access to recessed workpieces — order via Metav Werkzeuge or consult the specialists for fitment advice. Parting and Grooving Tool Holder K650TM — 32 mm shank, 3 mm cutting width (Teknik Makina) The Parting and Grooving Tool Holder K650TM is a clamping holder engineered for lathe parting and grooving applications, compatible with indexable 3C inserts and intended for secure mounting on standard tool posts. Secure clamping for 3C indexable inserts 32 mm shank for robust toolpost mounting 3 mm cutting width for narrow grooves 250 mm overall length for extended reach Precision performance for repeatable parting and grooving The K650TM combines a 32 mm shank with a stable body to deliver consistent axial alignment and repeatable cut depths on turning centres. The specified 3 mm cutting width is ideal for narrow grooves and parting operations where material separation must be controlled; this dimension reduces parasitic vibration and helps maintain tolerance bands during serial production. Designed around an insert-based system, the holder accepts 3C inserts, which allow quick index changes and predictable cutting geometry for reliable cycle times. Compatibility and reduced setup time through standardised interfaces Compatibility is provided via the ISO-style shank designation S32S and the secondary holder label 3C-R S224, enabling straightforward integration into existing tooling arrays. The 250 mm overall length offers additional reach for operations on larger diameters or when clearance is limited, without compromising mounting stability. The modular nature of the system supports fast insert swaps, which reduces non-productive time and keeps machine uptime high. Stable clamping for improved cutting stability and insert life A securely clamped insert seat and precisely machined contact surfaces give the holder the rigidity required to sustain steady cuts. The 50 mm cutting height (blade to centreline reference) ensures correct tool geometry for consistent engagement with the workpiece, which in turn helps protect insert edges and extend service life. The holder’s mass of 1.633 kg contributes to damping of high-frequency chatter while maintaining a manageable component for handling and fixture changes. Practical integration into workshop processes The holder’s measured 40 mm diameter where applicable and standardised mount dimensions simplify storage and tool-change procedures in production environments. The use of industry-standard 3C inserts keeps spare-part inventories compact and predictable. Technical teams can plan process windows with clear numerical parameters — shaft diameter, cutting width, cutting height and overall length — ensuring compatibility with existing clamping and turret arrangements while supporting consistent cycle-output quality. For application-specific advice or to confirm fitment of the Teknik Makina K650TM in a particular turning cell, contact Metav Werkzeuge for direct consultation and supply coordination — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: K650TM Manufacturer: Teknik Makina Shank designation: S32S Secondary holder designation: 3C-R S224 Shank diameter: 32 mm Cutting height: 50 mm Cutting width: 3 mm Compatible inserts: 3C Diameter: 40 mm Overall length: 250 mm Weight: 1.633 kg Facts Shaft diameter: 32 mm Cutting width: 3 mm Cutting height: 50 mm Overall length: 250 mm Diameter: 40 mm Weight: 1.633 kg Special features Compatible with 3C indexable inserts Shank designation S32S Holder designation 3C-R S224 Intended for parting and grooving applications FAQ What insert type does this holder accept? The K650TM is specified for 3C inserts, allowing indexable insert changes for efficient parting and grooving. Which shank diameter is required for mounting? Mounting is designed around a 32 mm shank, referenced as S32S in the technical designation. What is the maximum recommended cutting width? The holder is set up for a 3 mm cutting width, suited to narrow-groove and parting tasks. How long is the holder and how does that affect reach? With an overall length of 250 mm, the holder provides extended reach for recessed or larger-diameter turning operations. Does the holder include data on cutting height? The specified cutting height for correct geometry alignment is 50 mm, facilitating consistent insert engagement. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of rigidity and precision clamping combined with Sandvik 3C insert compatibility to ensure steady, repeatable grooving and parting cycles; order or discuss application requirements with Metav Werkzeuge for tailored workshop supply and fast delivery from Emmerich. Grooving clamp holder K722TM — 32 mm shank, 3 mm cutting width by Teknik Makina A robust grooving clamp holder designed for precision parting and grooving in turning operations, compatible with Sandvik 3C indexable inserts and built for stable machining with a 32 mm shank. 32 mm shank for stable clamping 3 mm cutting width for narrow grooves Compatible with Sandvik 3C inserts 250 mm overall length for deep cuts Stable clamping for higher productivity The holder delivers rigidity through its 32 mm shank, reducing chatter and enabling higher feeds with consistent tool life. The clamping concept secures the Sandvik 3C style inserts firmly, which translates into improved surface finishes and fewer interrupted cycles. By focusing on mechanical stability and a compact cutting edge, the tool supports continuous production runs where repeatability and minimal rework are decisive. Designed for practical setup and reach With a 250 mm overall length and a body diameter of 39 mm, the design balances reach and stiffness to permit deeper access without excessive overhang. The holder accepts ISO bar designation S32S and mates with support bars such as 3C-R-123 SDV, simplifying retrofits into existing turret layouts. At a mass of 1.567 kg, handling during changeovers is straightforward while maintaining sufficient mass for vibration damping, reducing adjustment time and setup complexity. Precise cutting geometry for narrow grooving The tool is optimised for narrow-slot applications with a 3 mm cutting width, ensuring clean, controlled cuts for parting and groove profiles where accuracy matters. The clamp arrangement allows quick insert replacement and repeatable positioning, helping to minimise downtime and maintain process stability. Suitable for toolrooms and production lathes, the holder supports operations that prioritise repeatable groove dimensions and predictable tool behaviour. Contact Metav Werkzeuge for application advice on the Teknik Makina grooving clamp holder K722TM and to discuss suitable inserts, delivery options and compatibility with existing toolholders from our Emmerich facility Technical data Article number: K722TM Manufacturer: Teknik Makina Compatible with: Sandvik (3C inserts) Insert designation: 3C Facts Shank diameter: 32 mm Cutting height: 60 mm Cutting width: 3 mm Overall length: 250 mm Body diameter: 39 mm Weight: 1.567 kg Special features ISO bar designation: S32S Clamp holder bar reference: 3C-R-123 SDV Suitable for indexable inserts 3C Optimised for parting and grooving tasks FAQ Which inserts fit this holder? The grooving clamp holder K722TM is designed for 3C style indexable inserts and is specified as compatible with Sandvik 3C inserts. What bar or shank standard is required for mounting? Mounting requires a bar with ISO designation S32S; the holder also mates well with bars referenced as 3C-R-123 SDV. Is the holder suitable for deep grooving on long workpieces? Yes — the 250 mm overall length provides additional reach for deeper cuts while the 32 mm shank helps maintain stiffness during extended overhangs. How does the clamp holder improve process reliability? The rigid shank and secure clamping reduce vibration and maintain consistent insert positioning, which improves repeatability and reduces scrap during grooving operations. What is the weight and how does it affect handling? The unit weighs 1.567 kg, offering a balance between dampening and manageable handling during tool changes and installation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rigid clamping, narrow cutting capability and proven insert compatibility to achieve reliable parting and grooving results in production. Order directly via Metav Werkzeuge or consult the technical team for application-specific advice. Parting tool holder D692TM — Right‑hand parting holder, 4 mm cut width, Teknik Makina A Parting tool holder D692TM engineered for precision parting and grooving on conventional and CNC lathes, suited to industrial turning where compact cut widths and stable clamping are required 20 × 20 mm shank for stable clamping 4 mm cutting width for narrow grooves Maximum parting depth 22 mm Compatible with Horn ISO 2020 inserts Rigid clamping for repeatable accuracy The central advantage of this tool holder is its 20 × 20 mm shank that provides a stiff interface to the tool post, reducing vibration and enabling repeatable results on short to medium overhangs. The holder’s 125 mm overall length and modest mass of 0.386 kg balance accessibility and stability, so set‑ups remain compact without compromising cut control. Designed for right‑hand cutting, the construction helps maintain consistent chip formation and surface finish when used within the specified parameters. Narrow cuts and controlled depth for precision work With a 4 mm effective cutting width, the holder is optimised for fine parting and groove profiles where minimal material removal is required. The maximum achievable parting depth of 22 mm allows safe machining of thin to moderate sections without unnecessary tool overhang. Compatibility with Horn inserts and the ISO 2020 seating means interchangeability with widely available insert geometries, simplifying spare part handling and supporting tight tolerance machining in small‑batch or contract turning. Faster set‑ups and broad insert support The D692TM accepts inserts that match the ISO 2020 format and aligns with standard accessory designations such as 4C‑R S229, reducing the need for bespoke components. This compatibility shortens changeover times and lowers stocking complexity for workshops that run multiple turning programmes. The holder’s geometry is arranged to support secure clamp seating and predictable insert indexing, which together contribute to reduced downtime and a more efficient production flow. Practical integration into workshop workflows Suppliers and maintenance teams benefit from a tool that is straightforward to fit and verify. The holder’s clear specification and common insert interface make it suitable for both manual lathes and turretised machines where small cross‑section cuts are frequent. For any uncertainty about fitment or suitability for a specific machine, the Metav Werkzeuge team can provide guidance and application checks to ensure the holder meets process demands while maintaining operational safety and tool life. Contact Metav Werkzeuge for an application review or to confirm insert compatibility; telephone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: D692TM Name: Parting tool holder (Stechklemmhalter) Manufacturer: Teknik Makina ECLASS: 21181005 Facts Shank height: 20 mm Shank width: 20 mm Cutting‑head width: 20 mm Cutting width: 4 mm Maximum parting depth: 22 mm Overall length: 125 mm Weight: 0.386 kg Cutting direction: right Special features Compatible with Horn inserts ISO 2020 designation Bar reference: 4C‑R S229 Designed for parting and grooving applications FAQ Which insert standard fits this holder? The holder accepts inserts to the ISO 2020 seating; Horn‑type inserts specified in the technical data are compatible with the Parting tool holder D692TM. Can the holder be used for both manual and CNC lathes? Yes, the D692TM is suitable for manual and CNC turning centres where its 20 × 20 mm shank and 125 mm length provide adequate rigidity and reach for small parting operations. What maximum parting depth is recommended? A maximum parting depth of 22 mm is specified for the holder; adhering to this limit helps maintain clamp stability and tool life. Is the cutting width adjustable? The tool holder is designed for a 4 mm cutting width; different insert geometries can slightly vary effective cut, but the holder’s seat is optimised for that nominal width. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precision parting, robust compatibility and compact design for reliable lathe operations; the D706TM supports right-hand parting and accepts Horn ISO 2020 inserts. Order the parting clamp holder directly via Metav Werkzeuge or consult Metav's advisors for fitment and procurement. Parting clamp holder D706TM by Teknik Makina — right-hand, 4 mm cutting edge A Parting clamp holder D706TM engineered for right-hand parting and grooving on lathes; designed to accept Horn indexable inserts to enable quick insert changes and consistent axial positioning Right-hand cutting direction 4 mm cutting edge width Compatible with Horn inserts (ISO 2020) Compact 125 mm overall length Accurate parting with defined cutting geometry The D706TM is built for controlled parting and grooving, offering a defined 4 mm cutting-edge that helps maintain a narrow kerf and reduces material waste. The right-hand orientation provides predictable chip flow on standard turning setups, while the ISO 2020 insert compatibility ensures access to widely available indexable grades. For production environments where repeatability matters, the defined insert seat and clamping concept reduce variability between tool changes and support consistent component tolerances. Efficient setup and space-saving installation With a 125 mm overall length and a head width of 20 mm, this clamping holder fits tight toolpost arrangements and minimises interference on multi-tool turrets. The compact dimensions simplify turret layout and shorten overhang, which in turn reduces vibration during cuts and improves surface finish. The toolholder’s modest mass of 0.401 kg balances rigidity with manageable handling during setup, making it suitable for both workshop and small-series production where quick, dependable changeovers are required. Compatibility that simplifies procurement and tooling strategy Compatibility with Horn indexable inserts (ISO 2020) means the holder integrates into common tooling ecosystems, lowering stocking complexity and easing insert selection for varied materials. The holder is also referred to as a clamping holder in many machine shops and pairs with the boring-bar designation 4C-R S224 where relevant. The maximum achievable parting depth of 18 mm allows deeper cuts than typical narrow grooving bars, enabling heavier cross-sections to be parted in fewer passes when process parameters permit. Proven supply chain and workshop support from Metav Sourcing this toolholder through Metav ensures a quality-controlled supply and direct access to tooling advice from a precision partner. Metav’s offering is backed by a broad product range and an experienced logistics hub in Emmerich, combining availability with technical consultation. For purchasers seeking to streamline tool inventories, the D706TM’s standard insert interface and compact footprint contribute to a pragmatic, cost-efficient tooling strategy while preserving machining reliability. For procurement or technical clarification on the D706TM parting clamp holder by Teknik Cutting Tools, contact Metav Werkzeuge for tailored advice and order assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: D706TM Designation: Parting clamp holder Brand: Teknik Makina SKU: D706TM Core technical data Cutting direction: right Cutting-edge width: 4 mm Max parting depth: 18 mm Overall length: 125 mm Head width: 20 mm Width: 20 mm Weight: 0.401 kg Design & compatibility Compatible insert manufacturer: Horn Insert ISO designation: 2020 Boring-bar designation: 4C-R S224 Cutting head width: 20 mm FAQ Which insert format fits this holder? The holder accepts inserts with the ISO 2020 designation; Teknik Cutting Tools' D706TM is designed for standard Horn-format indexable plates. What is the maximum parting depth? Maximum parting depth is 18 mm, specified for the D706TM parting clamp holder by Teknik Makina. Is the D706TM suitable for turret or toolpost mounting? Yes; the compact 125 mm overall length and 20 mm head width make the holder suitable for close-packed turret or toolpost arrangements. Which cutting orientation does this holder use? This toolholder is configured for right-hand cutting, intended for conventional right-hand lathe operations. How heavy is the holder and does its weight affect rigidity? The unit weighs 0.401 kg; the balanced mass contributes to stable clamping while remaining easy to handle during setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise parting operations and secure clamping thanks to the 4 mm cutting width and the robust 25 mm clamp dimensions; the tool supports plunges up to 18 mm for repeatable grooves. Order the holder directly via Metav Werkzeuge or consult our specialists for application advice. Parting clamp holder D910TM — Right-hand parting and grooving holder with 4 mm cutting width (Teknik Makina) The Parting clamp holder D910TM is a right-hand parting and grooving tool holder designed for reliable, repeatable separation cuts in turning applications 4 mm cutting width for precise parting Compatible with Sandvik indexable inserts Max plunge depth 18 mm for deep cuts 25 mm robust shank and 150 mm overall length Precision where process stability matters The holder is configured to deliver consistent parting performance with a narrow 4 mm cutting width, which reduces material waste and minimises cycle variability. Its geometry has been designed for rigidity so that chatter is suppressed and dimensional repeatability is improved. The combination of slim cutting edge and a stable clamping concept means that tight workpiece tolerances can be achieved on serial runs with fewer tool changes. This translates into measurable gains in throughput and a reduction in rework rates on the shop floor. Built for secure clamping and durable use With a 25 mm clamp height and matching 25 mm shank dimensions, the tool provides a stable platform for the insert and is well balanced across its 150 mm overall length. The clamping mechanism is engineered for secure clamping, ensuring the insert remains seated during heavy engagement and interrupted cuts. Constructed for workshop resilience, the holder is weight-optimised at 0.724 kg, which aids machine dynamics while maintaining the robustness required for daily production use. The tool is supplied to the ISO profile 2525, facilitating standardised setup and predictable performance. Compatibility that reduces downtime Designed to accept Sandvik indexable inserts, the holder is compatible with widely used carbide grades, enabling machining strategies that combine tool life with efficient chip control. The bores bar designation 4C-123 SDV-R is referenced for mounting and adapter matching on compatible toolposts. Quick insert replacement is supported by a straightforward clamping sequence, which shortens changeover time and keeps spindle hours productive. The capacity for a maximum plunge depth of 18 mm makes the holder suitable for deeper parting tasks without compromising stability. Practical handling and application guidance The right-hand cutting direction and the compact cutting-head geometry make the holder straightforward to programme and set up in standard turning cycles. The ISO conformity and compatibility with established insert suppliers reduce qualification time for new applications. Routine inspection and torque checks of the clamping screw are recommended to retain optimal seating and cutting performance; where higher demands are present, pairing the holder with the correct insert grade will extend service intervals and enhance surface finish quality. For reliable parting operations with Teknik Makina technology, contact Metav Werkzeuge to secure the D910TM holder and to discuss compatible Sandvik inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: D910TM Brand: Teknik Makina Compatible inserts: Sandvik ISO designation: 2525 Cutting direction: right Weight: 0.724 kg Facts Cutting width: 4 mm Max plunge depth: 18 mm Clamp height: 25 mm Cutting-head width: 25 mm Shank width: 25 mm Overall length: 150 mm Special features Right-hand cutting direction Compatible with Sandvik indexable inserts Boreshank designation: 4C-123 SDV-R Designed for parting and grooving applications FAQ What materials is this holder suited for? The holder is intended for conventional turning materials when used with appropriate inserts; pairing the D910TM with the right Sandvik carbide grade determines suitability for steels, stainless steels or non-ferrous alloys. Which insert forms fit the D910TM? Sandvik indexable inserts that match the ISO 2525 profile and a 4 mm cutting edge are suitable for use in this holder; use of the correct insert geometry is recommended for optimal chip control. How deep can the tool plunge in one pass? The holder supports a maximum plunge depth of 18 mm, enabling deeper parting operations when machine rigidity and insert selection permit. Is the D910TM right-hand or left-hand? This tool is configured for right-hand cutting direction and should be mounted accordingly for standard right-hand turning operations. What is the overall length and mounting size? The tool measures 150 mm overall and features a 25 mm clamp/shank profile for stable mounting and reduced vibration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of sturdy clamping, precise insert geometry and straightforward integration into CNC turning setups for consistent groove and parting results. Order the grooving clamp holder directly via Metav Werkzeuge or consult the specialists for machining recommendations. Grooving clamp holder K678TM — grooving clamp holder with 32 mm shank and 4 mm cutting width (Teknik Cutting Tools) The Grooving clamp holder K678TM is a purpose-built grooving and parting clamping device intended for CNC turning applications, offering standardised compatibility with indexable inserts and stable toolholding for repetitive production tasks. ISCAR 4C insert compatibility 32 mm shank for stable clamping 4 mm cutting width for narrow grooves 250 mm overall length for extended reach Consistent groove quality through engineered rigidity The grooving clamp is engineered to deliver repeatable results in high-volume turning operations. With a 32 mm shank and a substantial mass of 1.648 kg, the holder reduces vibration and improves dimensional consistency during cut-off and grooving processes. The compact 4 mm cutting width is suited to narrow-slot requirements and fine-details in workpieces, while the design maintains chip control and insert seating accuracy. Using a holder designed for indexable inserts means faster insert changes and predictable cutting geometry, which lowers setup time and increases throughput. Secure clamping and precise insert positioning for longer tool life A key advantage of this clamping device is its attention to insert support: the 55 mm insert height provides a solid contact surface and reliable locking that prevents micro-movement under cutting forces. Secure seating improves surface finish and extends insert life by promoting even wear. The clamping arrangement, compatible with ISCAR 4C inserts, ensures that cutting forces are transmitted into the body of the holder rather than into the insert seat, which reduces the risk of chipping and accidental loosening during interrupted cuts. The result is a stable process that benefits both accuracy and tool economy. Straightforward integration and workshop benefits Specified for compatibility with common turning toolposts, the holder accepts the S32S shank designation and matches the 4C-R DGN clamping style for easy retrofitting into existing setups. The 250 mm overall length and a tip diameter of 37 mm provide reach for moderately deep grooves while keeping the centre of gravity close to the toolpost for stability. Clear, standardised dimensions simplify tool selection and inventory: one holder covers a set of 4C insert styles from ISCAR, reducing the number of special tools required at the bench and streamlining procurement and maintenance processes. For reliable grooving with proven ISCAR 4C compatibility, request machining advice or source the Teknik Cutting Tools Grooving clamp holder K678TM via Metav Werkzeuge — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: K678TM Manufacturer: Teknik Makina Facts Shank diameter: 32 mm Overall length: 250 mm Cutting width: 4 mm Insert height: 55 mm Weight: 1.648 kg Tip diameter: 37 mm Special features Compatible insert type: 4C Compatible insert manufacturer: ISCAR Shank designation: S32S Clamping designation: 4C-R DGN Suitable for grooving and parting operations FAQ Which insert type fits this holder? The Grooving clamp holder K678TM accepts 4C indexable inserts and is specified for use with ISCAR 4C insert geometries to ensure correct seating and cutting geometry. What shank size and toolpost compatibility are required? This clamping device uses a 32 mm shank with the S32S designation and is designed for standard turning toolposts that accept that shank size. For which operations is the holder intended? The holder is optimised for grooving and parting operations on CNC lathes and turning centres, providing stable support for narrow-slot machining and controlled parting cuts. How does the clamping design protect insert life? Secure seating and the 55 mm insert-contact height minimise micro-movement and distribute cutting forces into the holder body, reducing chipping and promoting uniform insert wear. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust left-hand design, a 25 mm clamp height and a narrow 4 mm cutting width for precise, repeatable parting operations; the compact 150 mm overall length keeps setups tidy and reduces overhang. Order the (parting tool holder) directly via (Metav Werkzeuge) or ask our consultants if needed. Parting tool holder (Stechklemmhalter) – left-hand parting tool holder by Teknik Makina, ISO 2525 compatible A parting tool holder designed for left-hand cut orientation, offering secure clamping for precision parting and grooving in production and repair workshops, compatible with ISO 2525 tool bars and Sandvik indexable inserts Left-hand cut orientation 25 mm clamp height for stable holding 4 mm cutting width for narrow parting Compatible with Sandvik inserts ISO 2525 bar designation Consistent clamping that keeps production aligned The holder delivers stable clamping through a 25 mm clamp height, providing a secure hold that reduces vibration and runout during parting. Tight, consistent clamping translates into improved surface finish and fewer rejects, especially in repetitive operations where repeatability is critical. The measured mass of 0.724 kg contributes to rigid support without excessive toolpost load, making the holder practical for most lathes with standard tool posts. By focusing on repeatable mechanical stability, the design supports up-time and predictable cycle times for high-frequency parting tasks. Narrow cutting geometry for precise grooves and minimal waste Engineered for fine parting tasks, the tool accommodates a 4 mm cutting width, enabling narrow kerfs and conserving material while allowing controlled chip formation. The configuration permits a maximum stech depth of 18 mm, balancing capacity with stiffness to avoid deflection in through-parting or deep grooving operations. The left-hand cut orientation is optimised for machining where tool approach and workholding demand that directionality. This combination of narrow width and controlled depth is suitable where accuracy and minimal material loss are priorities. Quick integration with ISO tool bars and reduced set-up times Compatibility with ISO 2525 tool bar standards and the bar designation 4C-123 SDV-L simplifies mounting and changeover in modular tooling systems. The standardised interface reduces adjustment time and the need for bespoke adapters, which shortens machine downtime during tool changes. Being Sandvik-compatible for indexable inserts eases procurement and stocking, enabling the use of widely available insert geometries and grades. The result is a more efficient tool management process and simpler spare parts handling across workshop operations. Practical workshop dimensions and handling for everyday use With a compact 150 mm overall length and a head width of 25 mm, the holder minimises overhang and improves accessibility in confined setups. The robust head geometry and straightforward clamping mechanism facilitate fast insert seating and reliable retention, promoting safer, cleaner cycles. Materials and surface treatments focus on wear resistance and repeatability rather than cosmetic finish, prioritising long-term function. For operations that require dependable parting with minimal fuss, the construction supports stable tool life and predictable maintenance intervals. For tailored advice on Teknik Makina's parting tool holder and to confirm compatibility with existing tool bars or inserts, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and order support Technical data Article number: D878TM Manufacturer: Teknik Makina Overall length: 150 mm Clamp height: 25 mm Head width: 25 mm Width: 25 mm Cutting width: 4 mm Maximum cutting depth: 18 mm Weight: 0.724 kg Left-hand cutting direction Compatible with Sandvik indexable inserts ISO designation: 2525 Bar designation: 4C-123 SDV-L FAQ Which cutting direction does the holder support? The holder is designed for a left-hand cutting direction, which suits setups where the tool approaches the workpiece from the left. What insert manufacturers are compatible with this holder? This holder is compatible with Sandvik indexable inserts and accepts commonly used insert geometries for parting. What are the key dimensional limits for use? The holder has a 4 mm cutting width, a maximum parting depth of 18 mm and an overall length of 150 mm, guiding selection for specific parting tasks. Does the holder fit standard ISO tool bars? Yes. The interface follows ISO 2525 standards and matches the 4C-123 SDV-L bar designation for straightforward mounting. How heavy is the tool and what does that mean for setup? At 0.724 kg, the holder provides a balance of rigidity and manageable mass, reducing overhang while maintaining stability in typical lathe tool posts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com