Gibt es einen Hahn und Kolb Online Shop?

Compact indexable design with SPMG 0602 compatibility and a rigid 25 mm shank for stable, repeatable holemaking — order directly via Metav Werkzeuge or request advice from their specialists. Insert drill U816-1TM — indexable insert drill, Ø 16.5 mm, compatible with SPMG 0602 (Teknik Makina) The Insert drill U816-1TM is an indexable-insert drilling solution intended for production and workshop environments where fast insert changes and consistent hole quality are required Indexable design for SPMG 0602 inserts Diameter Ø 16.5 mm for medium holes 25 mm shank for secure toolholding 48 mm effective cutting length Stable drilling with quick insert exchange The tool is presented as an indexable insert drill, engineered to combine process reliability with economical running costs. Compatibility with SPMG 0602 inserts reduces tooling expense because individual edges are replaced rather than the whole body, which shortens downtime and simplifies inventory. The use of established insert types from Taegutec and YG-1 ensures straightforward sourcing and predictable performance for maintenance planners and buyers. Rigidity and repeatability for series work Built with a 25 mm shank, the holder geometry prioritises stiffness and concentricity to maintain hole tolerance across runs. The geometry, paired with an effective 48 mm cutting length, supports deeper engagement where required while the overall tool length of 124 mm offers accessibility without excessive overhang. Together, these dimensions improve repeatability and reduce vibration, which helps extend insert life and stabilise cycle times in batch production. Practical fitments and workshop efficiency Designed for conventional toolholders with the specified shank diameter, the drill is supplied as a compact assembly to streamline handling and storage. The tool’s weight and form factor support rapid changeover; the modular insert concept allows production teams to plan preventative insert changes and avoid scrap. When planning toolsets, note the nominal hole size Ø 16.5 mm and match coolant and feed parameters to the chosen SPMG 0602 insert grade for best results. For procurement of the Teknik Makina insert drill U816-1TM and expert assistance on insert selection, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: U816-1TM Manufacturer: Teknik Makina Key dimensions Diameter: 16.5 mm Shank diameter: 25 mm Cutting length: 48 mm Holder length: 56 mm Overall length: 124 mm Weight: 0.302 kg Compatibility and features Compatible inserts: SPMG 0602 Compatible insert manufacturers: Taegutec; YG-1 FAQ Which insert type is required for this drill? The insert drill U816-1TM uses SPMG 0602 inserts; compatible grades from Taegutec and YG-1 are commonly used for this tool. What is the shank size and how does it affect setup? The tool features a 25 mm shank; this dimension provides rigidity and must match the machine’s collet or holder for correct clamping. What hole diameter and cutting depth does this design support? The geometry is specified for a nominal hole of Ø 16.5 mm with an effective cutting length of 48 mm, suited to medium-depth drilling tasks. Is this drill suitable for production runs? Yes, the indexable concept and robust shank make the U816-1TM appropriate for series production where repeatability and low downtime are priorities. Which manufacturers’ inserts can be used as alternatives? Besides the standard SPMG 0602 format, inserts from Taegutec and YG-1 are listed as compatible suppliers for this drill Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from robust 90° cutting geometry and a large 160 mm diameter for stable corner machining combined with compatibility with WNMU 0806 indexable inserts from Kyocera; this ensures process reliability and straightforward serviceability. Order the 160 mm corner head (SKU T548TM) directly via Metav Werkzeuge or ask our consultants if needed. 160 mm Corner Head T548TM – for WNMU 0806 indexable inserts, 90° cutting geometry (Teknik Makina) 160 mm corner head (T548TM) designed for accurate 90° corner machining with WNMU 0806 indexable inserts in industrial milling and facing operations 160 mm diameter for stable machining 90° cutting geometry for precise corner transitions Compatible with WNMU 0806 Kyocera indexable inserts M5x12 Torx screws; Torx key T20 Maximise stability and reduce vibration for cleaner finishes The 160 mm diameter of this corner head increases mass and stiffness at the cutting zone, which improves stability during interrupted cuts and reduces chatter. With a defined 90° cutting geometry, the tool produces consistent corner transitions that lower the need for secondary finishing, helping to keep cycle times predictable. The head is designed for industrial environments and contributes to repeatable surface quality when paired with properly selected indexable inserts. Designed for compatibility and rapid maintenance Compatibility with WNMU 0806 indexable inserts from Kyocera simplifies procurement and tool management; standardised insert formats mean fast replacement and broad availability. Fastener details such as M5x12 screws and a T20 Torx interface are industry-standard, enabling quick, toolroom-style maintenance without specialised equipment. The compact overall length of 63 mm and a weight of 3.985 kg offer a balanced assembly for stable spindle interaction while remaining easy to handle during tool changes. Productivity gains through efficient cutting geometry and multiple edges Equipped with 12 cutting edges, the head supports multiple index positions, extending service intervals and reducing downtime for insert changes. The combination of a stiff tool body and multiple usable edges drives favourable cost-in-use by spreading tool consumption across more cutting surfaces. As part of Teknik Makina’s product range, this corner head is intended for operators seeking reliable performance in corner and shoulder milling tasks where precision and process stability are priorities. Contact Metav Werkzeuge today to secure the Teknik Makina 160 mm corner head (SKU T548TM) for improved corner machining; specialists at Metav in Emmerich are available to advise on integration and tooling choices via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: T548TM Description: 160 mm corner head for WNMU 0806 indexable inserts Manufacturer: Teknik Makina ECLASS: 21181015 Numbers / Core technical data Diameter: 160 mm Total length: 63 mm Weight: 3.985 kg Cutting angle: 90° Number of cutting edges: 12 Torx screw: M5x12 Torx key: T20 Designs / Special features Product type: Corner head Compatible inserts: WNMU 0806 Compatible insert manufacturer: Kyocera SKU reference: T548TM Category: Machining → Corner head FAQ Which insert type fits the corner head? The corner head accepts WNMU 0806 indexable inserts; compatibility with Kyocera WNMU 0806 inserts is specified for the T548TM. How many usable cutting edges are available? The T548TM is specified with 12 cutting edges, allowing multiple index positions to extend time between insert replacements. What fastening hardware is required for insert clamping? Inserts are secured with M5x12 Torx screws using a T20 Torx key for reliable clamping and quick servicing. What applications is this tool head intended for? This corner head is intended for industrial corner and shoulder milling operations where a defined 90° cutting geometry and process stability are required. What are the key dimensional specifications to consider for tool setup? Consider the 160 mm diameter, 63 mm total length, and a mass of 3.985 kg when planning spindle speed, tool holder balance and fixture clearance. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of a 40 mm shank for rigid clamping, a 90° cutting angle for versatile turning, and direct compatibility with APKT 1604 indexable inserts for consistent production results. Order the Corner tool head directly via Metav Werkzeuge or ask the consultants for tailored advice. Corner tool head – 90° cutting angle, for APKT 1604 indexable inserts (Teknik Makina) The Corner tool head is a compact CNC turning head designed for use with APKT 1604 indexable inserts, offering stable clamping and simple insert changes in machining centres and lathes. For APKT 1604 indexable inserts 90° cutting angle for versatile machining 40 mm shank diameter for stable clamping Torx screw M4x10; T15 key required Maximise process stability and rigidity on the lathe The Corner tool head delivers stable clamping through its solid 40 mm shank and a mass that supports steady cutting forces, which reduces vibration and improves surface finish. The 90° cutting angle provides flexibility across turning, profiling and shoulder cuts, enabling consistent results with a wide range of workpiece geometries. By pairing a robust tool head with industry-standard indexable inserts, the assembly promotes repeatable tool geometry and lowers scrap rates, translating into measurable productivity gains on batch production runs. Fast insert changes and low downtime for shops Designed for practical workshop maintenance, the head secures inserts with an M4x10 Torx screw operated via a T15 key, providing a fast and secure clamping method that shortens service intervals. Compatibility with common supplier inserts such as Korloy means stocked inserts can be swapped quickly without adapter work, helping to keep machines running. The straightforward fastening reduces the risk of incorrect assembly and supports predictable cycle times in mixed-production environments. Consistent geometry for precision machining tasks With a compact overall length and engineered contact surfaces, this turning head maintains cutting geometry across repeated insert indexings. The relatively short 62 mm overall length assists in confined tool positions while the construction supports stable tool overhangs up to the specified diameter, making it suitable for light to medium-duty turning applications. Specifying a dedicated head matched to APKT 1604 inserts simplifies tooling lists and ensures that insert performance is fully exploited for repeatable, high-quality finishes. For reliable delivery from Emmerich and expert advice on integrating Teknik Makina tooling into existing workflows, contact Metav Werkzeuge for tailored guidance and order support. Technical Data SKU: T192TM Name: Corner tool head Brand: Teknik Makina eClass: 21181015 Numbers / Core technical data Shank diameter: 40 mm Diameter: 160 mm Overall length: 62 mm Weight: 4.885 kg Cutting angle: 90° Special features / Compatibility For APKT 1604 indexable inserts Compatible with Korloy inserts Torx screw: M4x10 Torx key: T15 Cuts: 10 FAQ What inserts are compatible with this head? The Corner tool head is designed for APKT 1604 indexable inserts and is compatible with Korloy variants following that designation. Which fastening tool is required for insert changes? Insert clamping uses an M4x10 Torx screw; a T15 Torx key is needed for secure tightening. What shank diameter does the head use for mounting? The head has a 40 mm shank diameter suitable for standard toolholders accommodating that size. Is the head suitable for shoulder and profiling operations? Yes, the 90° cutting angle and rigid construction make it suitable for shoulder turning and general profiling tasks in CNC turning. What is the overall length and how does that affect setup? The overall length is 62 mm, which helps when working in compact setups by limiting tool overhang and improving stiffness. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a 90° cutting geometry and secure 40 mm mounting for precise corner and shoulder machining; the compatibility with LNMT 1306 indexable inserts ensures quick insert replacement and consistent part quality. Order via Metav Werkzeuge or consult the technical advisors for application support. Corner tool head T233TM — 90° cutting angle, 40 mm shank (Teknik Cutting Tools) A durable Corner Tool Head T233TM engineered for accurate cornering and shoulder operations using LNMT 1306 indexable inserts 90° cutting geometry for exact shoulders Compatible with LNMT 1306 indexable inserts 40 mm mounting diameter for secure clamping Supplied Torx screw M4x10 and T15 key Repeatable shoulder accuracy for stable production The design centres on a 90° cutting angle that delivers consistent shoulder faces and right‑angle features across batch production. The straight geometry reduces set‑up variance and simplifies toolpath programming on CNC lathes, while the robust body minimises vibration for improved surface finish. This stability translates directly into fewer reworks and higher first‑pass yields, making the holder a practical choice for precision mechanical workshops and small production lines. Fast insert changes and reliable clamping Equipped for LNMT 1306 style indexable inserts, the holder supports rapid insert replacement with standard fastening: M4x10 Torx screw tightened with a T15 key. The 40 mm mounting diameter provides a secure connection to conventional tool posts and quick‑change adaptors, ensuring repeatable positioning after each change. Compatibility with the specified insert geometry simplifies procurement and reduces inventory complexity for maintenance teams. Engineered for heavy‑duty use and balance The tool head’s overall construction, with a 160 mm head diameter and weighing 5.046 kg, is aimed at robust, stable cutting tasks where rigidity matters. The balanced mass and solid body reduce chatter during interrupted cuts and long, continuous operations. Where applicable, the configuration supports multiple cutting edges — listed as 14 cutting points in the specifications — enabling extended interval times between maintenance checks and insert rotations. Suitable applications and process advantages This tool head is intended for cornering and shoulder turning where repeatability and precise right‑angle profiles are required. Because it accepts LNMT 1306 inserts and matches ISCAR‑type geometries, the holder integrates smoothly into existing tool inventories. Fewer set‑ups, secure clamping and standardised fastening mean shorter changeover times and predictable cycle outputs, helping to maintain throughput in demanding production schedules. For demanding cornering tasks choose the Teknik Cutting Tools solution — contact Metav Werkzeuge in Emmerich for tailored advice and supply (info@metav-werkzeuge.com | +49 2822 7131930) Technical Data Article number: T233TM Manufacturer: Teknik Makina Compatible inserts: LNMT 1306 Matching insert manufacturer: ISCAR Torx screw: M4x10 Torx key: T15 Facts Diameter: 160 mm Shank / mounting diameter: 40 mm Overall length: 63 mm Weight: 5.046 kg Cutting angle: 90° Cutting edges: 14 Features For LNMT 1306 indexable inserts Secure clamping for repeatable positioning Standard Torx fastening for quick replacement Suited for corner and shoulder machining Robust construction for reduced vibration FAQ Is the tool head compatible with other insert types? The Corner Tool Head T233TM is specified for LNMT 1306 indexable inserts; alternative insert types are not listed in the product data and should be verified before use. What fastening hardware is supplied? The delivery includes the M4x10 Torx screw; tightening requires a T15 Torx key as indicated in the technical details. Can the holder be mounted in standard tool posts? The holder uses a 40 mm mounting diameter suitable for conventional tool posts and many quick‑change systems; ensure the lathe or adaptor accepts this shank size. Which insert manufacturer fits best with this head? The holder is matched to ISCAR‑type geometry and is documented as compatible with LNMT 1306 inserts for predictable seating and cutting performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a rigid 90° cutting solution that accepts R390-1806 indexable inserts and a robust 40 mm shank for secure clamping; the design supports repeatable setups and stable machining. Order directly via Metav Werkzeuge or consult the specialists for application guidance. Corner Tool Head T432TM — 90° holder for R390-1806 indexable inserts, 40 mm shank (Teknik Makina) The Corner Tool Head T432TM is a right‑angle turning head engineered for heavy duty lathe operations, designed to accept R390‑1806 indexable inserts and provide reliable shoulder and face turning where stiffness and repeatability are required. 90° cutting angle for square shoulders Compatible with R390-1806 Sandvik inserts 40 mm shank for high rigidity Torx M4x11 screw with T15 key Stable cutting for repeatable shoulder work The head is built for consistent 90° shoulder machining, delivering a defined geometry that simplifies setup and reduces rework. With a 160 mm head diameter and 40 mm shank, the assembly provides increased mass at the contact zone, which improves rigidity and vibration damping. That structural stability translates into more reliable finishes and longer tool life when paired with the appropriate indexable inserts. Simple integration with standard indexable inserts Designed specifically for the R390‑1806 insert family and compatible with Sandvik formats, the holder removes uncertainty at purchase and reduces spare‑parts complexity. The fastening uses a Torx M4x11 screw operated with a T15 key, enabling secure clamping and straightforward insert changes. The straightforward interface supports fast changeovers, helping to keep machine downtime to a minimum. Compact geometry with industrial endurance The compact overall length of 62 mm and a head body weight of 4.411 kg balance manoeuvrability with the mass required for stable cutting. Where tight tool envelopes and clearance are needed, the compact profile helps maintain access without sacrificing performance. The component is suited to workshops seeking a dependable right‑angle turning solution that integrates with established insert systems. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina Corner Tool Head T432TM into production—phone +49 2822 7131930 or email info@metav-werkzeuge.com for technical clarification and order support Technical data Article number: T432TM Designation: Corner tool head Secondary designation: for R390-1806 Indexable Inserts Manufacturer: Teknik Makina Facts Weight: 4.411 kg Shank diameter: 40 mm Head diameter: 160 mm Overall length: 62 mm Cutting angle: 90° Cutting edges: 10 Special features Compatible with R390-1806 indexable inserts Suitable for Sandvik insert formats Fastening: Torx screw M4x11 Required key: T15 ECLASS: 21181015 FAQ What inserts fit this tool head? The T432TM accepts R390‑1806 indexable inserts; it is specified to work with Sandvik formats compatible with that insert family. Is the shank suitable for heavy‑duty turning? Yes, the 40 mm shank and 160 mm head diameter of the corner tool head provide the structural mass and clamping stability required for demanding shoulder and face turning tasks. How is the insert secured and changed? Inserts are retained with a Torx M4x11 screw; a T15 key is used for secure fastening and quick replacement of the cutting insert. Can the tool head be used in compact tool envelopes? With an overall length of 62 mm, the T432TM is designed to fit restricted tool zones while maintaining necessary rigidity for quality cuts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the Ø160 mm diameter and 12 cutting edges for steady, high-volume material removal; the 40 mm holder diameter and M4x10 fixing deliver stable clamping and straightforward reassembly — order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Eckmesserkopf — Corner tool head for SNHU 1206 indexable inserts (Teknik Makina) The Eckmesserkopf is a corner cutting head designed for SNHU 1206 indexable inserts, optimised for robust, repeatable machining in CNC turning and milling tool assemblies. Ø 160 mm diameter for stable cutting 12 cutting edges for high material removal 40 mm holder diameter for secure mounting Compatible with SNHU 1206 inserts (Palbit) Engineered for consistent, high-throughput cutting The cutter head is built around a large Ø160 mm diameter and a set of 12 cutting edges, which together reduce vibration and distribute cutting forces more evenly. This configuration supports higher material removal rates and prolongs tool life by preventing concentrated wear. The design suits production-oriented tool stacks where stability and predictable cycle times matter, making the component a reliable choice for repetitive shoulder and corner operations in steel and alloy workpieces. Secure fastening and straightforward maintenance Fastening is carried out with an M4x10 Torx screw that uses a T15 key, providing a compact, repeatable clamping interface that simplifies changeovers and minimises downtime. The head accepts SNHU 1206 indexable inserts — a common insert format supplied by manufacturers such as Palbit — so replacement inserts are readily available and easy to source. Clear specification of the fixing and insert type helps technicians plan spares and maintenance intervals without ambiguity. Compact integration and machine-ready dimensions With a 40 mm holder diameter and an overall length of 63 mm, this head integrates into standard tool holders while maintaining a compact footprint that supports tool balancing and predictable overhang behaviour. The tool's mass of 4.328 kg contributes to stable cutting dynamics on medium to heavy-duty machines. These measurable characteristics allow process engineers to calculate stiffness, select suitable spindle speeds and feeds, and reduce the risk of chatter — all contributing to higher first-pass yields in series production. Contact Metav Werkzeuge in Emmerich for tailored tooling recommendations and fast specification checks when integrating Teknik Makina cutting heads into existing CNC setups Technical data Article number: T622TM Designation: Corner tool head (Eckmesserkopf) For: SNHU 1206 indexable inserts Manufacturer: Teknik Makina Core measurements Diameter: 160 mm Number of cutting edges: 12 Overall length: 63 mm Shank/holder diameter: 40 mm Weight: 4.328 kg Features & compatibility Compatible with Palbit inserts Fixing screw: M4x10 (Torx) Torx key: T15 FAQ Which insert type fits this head? The head is specified for SNHU 1206 indexable inserts; compatibility with Palbit variants is confirmed for the listed geometry. What is the required holder diameter? A 40 mm holder diameter is required for correct mounting and to ensure rated stiffness. How many cutting edges does the head provide? The tool body carries 12 cutting edges, enabling higher material removal with improved stability. What screw and key are used for fastening? Fastening is by an M4x10 Torx screw driven with a T15 key; these specifications aid planning for spares. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, compatible tool head that combines reliable fit with sturdy mass for improved vibration control; designed for use with SPMT 1204 indexable inserts, a 40 mm shank and 160 mm head ensure stable engagement and consistent machining results. Order the Eckmesserkopf T655TM directly via Metav Werkzeuge or consult our specialists for application guidance. Eckmesserkopf T655TM — Tool head for SPMT 1204 indexable inserts, 160 mm head diameter (Teknik Makina) The Eckmesserkopf T655TM is a precision tool head designed for use with SPMT 1204 indexable inserts, suited to machining tasks that demand repeatable clamping and robust head geometry. Compatible with SPMT 1204 indexable inserts 40 mm shank diameter for stable clamping 160 mm head diameter for deep reach Robust 3.98 kg mass for vibration damping Predictable compatibility for consistent results The holder was developed to deliver consistent fit with SPMT 1204 indexable inserts, ensuring predictable seating and indexed repositioning during insert changes. Compatibility reduces set-up time and supports repeatable tool offsets in the machine control, which in turn lowers scrap rates and increases uptime. The design includes a standard Torx screw M5x12 with a T20 drive, simplifying insert clamping and maintenance without requiring special fasteners. Stability and dynamic performance for cleaner surfaces A 40 mm shank and a 160 mm head diameter provide a balance between rigidity and reach, enabling stable cutting conditions on medium to heavier cuts. The assembly mass of 3.98 kg contributes to natural damping of low-frequency vibration, which improves surface finish and lengthens insert life under comparable cutting parameters. The construction supports operators who prioritise controlled chip formation and dimensional accuracy over extended cycles. Workshop integration and service-friendly handling The component’s compact overall length of 63 mm and straightforward fastening concept make it easy to integrate into existing toolholders and turret stations without complex modifications. The toolhead supports quick insert indexing and routine maintenance procedures, helping to keep toolroom turnaround times short. For procurement and stocking, Metav Werkzeuge provides transparent availability from Emmerich and technical advice for correct selection and installation. For tailored machining advice, stock checks or specification confirmation for the Teknik Makina Eckmesserkopf T655TM, contact Metav Werkzeuge for a specification check and rapid dispatch from Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: T655TM Name: Eckmesserkopf Description: for SPMT 1204 Indexable Inserts Facts Diameter: 160 mm Shank diameter: 40 mm Total length: 63 mm Weight: 3.98 kg Number of cutting edges: 10 Torx screw: M5x12 Torx key size: T20 Special features Compatible with SPMT 1204 indexable inserts Compact overall length for easy integration Robust design for vibration damping FAQ Which inserts fit this tool head? The Eckmesserkopf T655TM is designed for SPMT 1204 indexable inserts and secures them with the supplied Torx clamping screw system. What are the key mounting dimensions? Relevant mounting figures for the tool head are a 40 mm shank diameter and a 160 mm head diameter, with an overall length of 63 mm for integration planning. How does the tool head affect surface quality? The mass of 3.98 kg and the rigid shank geometry improve vibration damping, which helps to produce a more consistent surface finish and extend insert life. Which screw and driver are required for insert clamping? Clamping is performed with a Torx screw M5x12 using a T20 driver for reliable and repeatable tightening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust stiffness, precise compatibility with TPKN 1603–2204 indexable inserts and straightforward clamping for uninterrupted turning operations — order the Eckmesserkopf directly via Metav Werkzeuge or ask our consultants for application advice. Eckmesserkopf — 90° turning head for TPKN 1603–2204, Ø160, D40 shank (Teknik Makina) The Eckmesserkopf is a purpose-built 90° turning head for external turning and facing operations, engineered to accept TPKN 1603–2204 indexable inserts for efficient material removal in CNC and turret lathe applications. 90° cutting angle for reliable facing Compatible with TPKN 1603–2204 inserts D40 shank with Ø160 head diameter Secure M8x24 clamping screw Stable machining from a compact, heavy head A rigid Ø160 head combined with a substantial mass of 4.15 kg provides inherent damping for improved cutting stability. This construction reduces vibration and supports consistent surface quality in interrupted and continuous cuts, delivering the principal benefit of higher process reliability. The 90° geometry produces predictable chip flow and concentricity, which is particularly useful for facing and shoulder operations in serial production or job-shop environments. Rapid, secure insert clamping for predictable changeovers The toolhead accepts standard TPKN 1603–2204 indexable inserts, enabling quick insert replacement with minimal setup time. A M8x24 clamping screw and a 5 mm Allen key interface ensure a secure seat and repeatable clamping force, reducing the risk of insert movement under load. The practical result is less downtime during maintenance intervals and a clear improvement in throughput for medium- to heavy-duty turning tasks. Compatibility that simplifies tooling logistics By supporting common insert formats and featuring a D40 shank, this head integrates cleanly into existing tool systems and holders, reducing the need for special adapters. The design helps centralise tooling stocks and streamlines ordering for production shops that standardise on TPKN inserts, which in turn reduces procurement complexity and supports faster response to varying batch sizes. Built for continual production with clear handling benefits An overall length of 62 mm and an effective measurement e = 66.7 mm deliver compact installation without sacrificing rigidity, while the head’s configuration with seven cutting edges increases utilitarian longevity between interventions. These attributes combine to lower total process interruptions and make the component suited to demanding lathe programmes where predictable tool life and secure clamping are essential. For precise turning applications, choose Teknik Cutting Tools' robust turning head and contact Metav Werkzeuge for tailored procurement guidance and prompt delivery from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: T134TM Manufacturer: Teknik Makina e = 66.7 mm Head diameter: 160 mm Shank diameter (D): 40 mm Overall length: 62 mm Weight: 4.15 kg Cutting angle: 90° Cutting edges: 7 For indexable inserts: TPKN 1603–2204 Compatible insert type: TPKN 2204 Clamping screw: M8x24 Allen key: 5 mm FAQ What insert types are compatible with this turning head? The turning head is compatible with TPKN 1603–2204 indexable inserts, allowing use of both TPKN 1603 and TPKN 2204 sizes depending on the chosen insert specification. Is the toolhead suitable for heavy interrupted cuts? Yes; the Eckmesserkopf benefits from a Ø160 head and a mass of 4.15 kg, which increases damping and supports stable cutting under interrupted conditions. Which shank diameter is required for mounting? The tool requires a D40 shank interface for secure mounting in compatible toolholders and turrets. How is the insert secured in the head? Inserts are fixed using a M8x24 clamping screw; tightening and loosening is performed with a 5 mm Allen key for repeatable clamping. Does the head require long installation space on the turret? Its 62 mm overall length and compact profile are designed for minimal overhang while maintaining rigidity, making it suitable for confined tool stations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a 160 mm large-diameter tool body, 12 cutting edges and a secure Ø40 mm shank to increase material removal rates while maintaining stability in shoulder and face milling operations; order this corner milling head directly via Metav Werkzeuge or consult the specialists for application advice. Corner Milling Head T850TM – 160 mm diameter, 90° cutting angle (Teknik Makina) The Corner Milling Head T850TM is a heavy‑duty milling solution developed for accurate shoulder and face milling with XNEX 0806 indexable inserts. 160 mm diameter for broad engagement 90° cutting angle for precise shoulder milling Compatible with XNEX 0806 indexable inserts 12 cutting edges for efficient material removal Maximise throughput with a large-diameter design The large 160 mm tool body together with 12 cutting edges is engineered to increase throughput in batch and serial milling. A higher number of cutting edges reduces chip load per insert and enables more consistent cutting conditions across the tool path, which results in improved cycle times and longer insert life. The configuration is particularly effective where broad face contact and fast material removal are priorities, delivering measurable gains in process efficiency and predictable output for production runs. Achieve exact shoulders and stable machining results A true 90° cutting angle guarantees square, repeatable shoulder geometry without complex compensations. The combination of a Ø40 mm shank and a mass of 5.154 kg improves tool rigidity and dampens vibration, which helps maintain dimensional accuracy and surface finish. These mechanical characteristics translate into lower rework rates and tighter tolerances on machined components, supporting consistent part quality even under demanding cutting conditions. Fast tool changes and secure clamping for industrial use Insert and fastening design focuses on quick maintenance cycles: the head accepts XNEX 0806 indexable inserts and is compatible with inserts from SECO and WINSTAR, reducing stocking complexity. Inserts and the tool body are secured with M4x12.5 Torx screws; an T15 Torx key is specified for safe tightening. This standardised fastening arrangement minimises downtime during insert replacement and simplifies assembly work in machine shops where rapid tool turnover is required. Built for production environments and dependable supply Constructed for robust service life and repeatability, the head is suitable for continuous workshop use and heavy milling tasks. The engineering focus on stable mounting and repeatable clamping supports long production cycles with fewer interruptions. Supplied through Metav Werkzeuge, customers benefit from a European distribution hub that acts as a quality filter, ensuring reliable availability and consistent product provenance for industrial buyers and trade customers. Discuss application requirements with Metav Werkzeuge to match the right Teknik Makina corner milling head to the machining task or to request detailed drawings and compatibility data — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: T850TM Manufacturer: Teknik Makina Name: Corner milling head (Eckmesserkopf) Designation: for XNEX 0806 Indexable Inserts Core data Diameter: 160 mm Shank diameter: 40 mm Overall length: 63 mm Weight: 5.154 kg Cutting angle: 90° Cutting edges: 12 Special features Compatible inserts: XNEX 0806 Compatible insert manufacturers: SECO, WINSTAR Fastening screw: M4x12.5 Torx Torx key size: T15 FAQ Which indexable inserts fit this milling head? The head is designed for XNEX 0806 indexable inserts and accepts equivalent inserts from manufacturers such as SECO and WINSTAR. What shank size is required for mounting the tool? The tool features a Ø40 mm shank, which requires a matching holder or arbor designed for a 40 mm mounting diameter to ensure secure clamping. How many cutting edges does the head provide and what is the diameter? The milling head provides 12 cutting edges and has a 160 mm diameter, making it suitable for broad face engagement and productive material removal. What fastening hardware is used for the inserts? Inserts are secured with M4x12.5 Torx screws; a T15 Torx key is specified for tightening and removal. Is the head suitable for square shoulder milling? Yes — the 90° cutting angle is intended for accurate square shoulder and face milling applications, delivering consistent right-angle profiles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact corner turning head with a 90° cutting angle and support for TPKN 1603–2204 indexable inserts ensures stable clamping and repeatable profiles; ideal where consistent surface finish and fast insert changes matter. Benefit from a 160 mm diameter and robust M8 locking for reduced vibration—order via Metav Werkzeuge or consult our specialists for application matching. Corner tool head T110TM — indexable turning head, 160 mm diameter, for TPKN inserts (Teknik Makina) Corner tool head T110TM designed for precise facing, profiling and external turning with TPKN 1603–2204 indexable inserts, offering a secure clamping solution for medium to heavy machining tasks 160 mm diameter for stable engagement Compatible with TPKN 1603–2204 inserts M8 locking screw and TA012 clamp plate 7 cutting edges for extended tool life Consistent metal removal with a rigid, 90° geometry The tool head delivers a 90° cutting angle and a large-diameter body to maintain cutting stability during demanding turning operations. The combination of a 160 mm diameter and the specified geometry reduces chatter and vibration, which translates into improved surface finish and predictable tool wear. Designed for indexable insert systems, this solution simplifies process planning: the machine operator benefits from predictable cutting forces and a reliable contact area for each machining pass, resulting in fewer scrap parts and steadier cycle times. Fast insert changes and repeatable clamping for uptime Clamping and maintenance are engineered for workshop efficiency: the head uses a TA012 clamp plate secured by an M8x24 locking screw, with hex screws M4x10 for auxiliary fixation and an Allen key size 5 for service. This arrangement ensures that insert seating is repeatable after each change, so setup time is cut and dimensional scatter is minimised. Clear mechanical retention also supports safe high-feed passes and lowers the likelihood of insert movement under load, which is crucial for uninterrupted production schedules. Productivity through extended tool life and straightforward integration With 7 cutting edges and a compact overall profile, the head promotes longer intervals between indexings and lowers consumable turnover. The body weight of 4.22 kg, a mounting bore of Ø40 mm, and an overall length of 62 mm make the unit suitable for a broad range of turret and toolpost interfaces while keeping balance and inertia within acceptable limits for many turning applications. The design prioritises compatibility with the common TPKN family, allowing customers to consolidate insert stocks and reduce logistical complexity — a practical route to greater shop-floor efficiency. Contact Metav Werkzeuge for delivery options, technical matching and specification advice on the Teknik Cutting Tools corner tool head T110TM with 90° cutting geometry Technical Data SKU: T110TM Name: Corner tool head (Eckmesserkopf) Brand: Teknik Makina For inserts: for TPKN 1603–2204 Indexable Inserts Facts Diameter: 160 mm e (measured): 66.7 mm Mounting bore: Ø40 mm Overall length: 62 mm Weight: 4.22 kg Cutting angle: 90° Special features For TPKN 1603–2204 indexable inserts Locking screw: M8x24 Clamp plate: TA012 Hex screw: M4x10 Allen key: size 5 7 cutting edges FAQ Which indexable inserts are compatible with this head? The corner tool head T110TM is specified for TPKN 1603–2204 indexable inserts and is optimised for that insert geometry and seating. What is the cutting angle and what does it suit? The head provides a 90° cutting angle, suitable for facing, shoulder turning and profiling tasks where a square shoulder or right-angled feature is required. How are inserts clamped in the tool head? Insert clamping is achieved via the TA012 clamp plate together with an M8x24 locking screw and additional M4x10 hex screws, ensuring repeatable seating and secure fixation. What mounting interface does the head require? Mounting requires a bore of Ø40 mm and the unit has an overall length of 62 mm; the mass is 4.22 kg, so check turret or toolpost load ratings before fitting. How does the head reduce tooling costs? By supporting 7 cutting edges and a common insert family, the T110TM reduces spare-part variety and extends intervals between indexings, which lowers consumable consumption and administrative effort. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of precise engagement and insert compatibility: the 160 mm diameter and 14 mm cutting height deliver stable material removal, while compatibility with CCMT 09T3 inserts and a 40 mm arbor ensure quick mounting and predictable tool life. Order directly via Metav Werkzeuge or ask the consultants for specification support. DF188TM Disc milling cutter – Ø160 mm, CCMT 09T3 compatible (Teknik Makina) A DF188TM disc milling cutter designed for insert-based milling operations, offering reliable mounting via a 40 mm arbor and a 14 mm cutting height for repeatable material engagement Ø 160 mm cutter body for indexable inserts Compatible with CCMT 09T3 inserts 40 mm arbor for secure mounting 14 mm cutting height for consistent engagement Consistent cut quality through geometry and insert system The disc body, sized at Ø160 mm, is engineered to hold standard CCMT 09T3 indexable inserts, providing a balance between metal removal rate and surface finish. Using indexable inserts means the cutting edges are replaceable rather than the whole tool, which reduces per-cutting-edge cost and simplifies maintenance. The 14 mm cutting height offers a stable engagement depth that helps to maintain constant chip formation and reduces vibration during moderate axial loads. Secure clamping and straightforward reassembly A 40 mm arbor bore is provided for positive seating in common milling spindles; the body is fastened with torx M3,5x9 screws that require a T15 key. This configuration supports secure clamping, reducing the risk of micro-movement under load. With a documented weight of 1.535 kg, the cutter body provides the inertia necessary for steady cutting, which assists in maintaining concentricity and extending insert life when correctly mounted. Defined engagement limits for predictable machining The cutter is specified with an axial engagement parameter of 50 mm, enabling controlled material removal for slotting and face-milling operations within that engagement range. Having a clear engagement figure aids process planning: feeds and speeds can be calculated with greater confidence and cycle times become more predictable. Where a workshop relies on repeatable set-ups, this clarity supports productivity and reduces trial-and-error. Practical workshop advantages and lifecycle considerations Designed for use with widely available CCMT inserts, the cutter body supports quick edge changes and inventory efficiency. The modular approach—body plus indexable inserts—means that wear parts are inexpensive to replace and downtime is minimised. For procurement and maintenance strategies, the cutter offers a pragmatic route to lowering total cost of ownership while preserving performance standards typical of industrial milling setups. Contact Metav Werkzeuge for tailored technical advice on the Teknik Makina DF188TM disc milling cutter and specification guidance from our Emmerich site – eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: DF188TM Manufacturer: Teknik Makina SKU: DF188TM Insert type: CCMT 09T3 Arbor bore: 40 mm Diameter: 160 mm Cutting height: 14 mm Axial engagement: 50 mm Weight: 1.535 kg Torx screw: M3,5x9 Torx key: T15 Core specifications Diameter: 160 mm Cutting height: 14 mm Arbor bore: 40 mm Axial engagement: 50 mm Weight: 1.535 kg Special features Compatible with CCMT 09T3 inserts Torx M3,5x9 fixation Requires T15 key for screw tightening Disc body design for indexable-insert milling FAQ Which inserts fit this cutter? The cutter accepts CCMT 09T3 indexable inserts; the body is configured for the standard CCMT seat and clamp arrangement used with that insert size. What arbor size is required for mounting? A 40 mm arbor bore is specified for the DF188TM, providing a secure fit for spindle adapters and standard arbor systems. What is the maximum axial engagement for the disc? The cutter is specified with a 50 mm axial engagement parameter, which should be used to plan depth-of-cut for stable operation. Which screw and key are needed for assembly? Fastening is achieved with torx screws M3,5x9; a T15 torx key is required for tightening and insert clamping operations. Is the cutter suitable for high-inertia milling operations? With a body weight of 1.535 kg and a 160 mm diameter, the cutter provides the mass and stability that support steady engagement in moderate milling tasks when mounted correctly. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of high material removal, reliable insert clamping and straightforward integration into standard toolholders for efficient milling cycles; order the disc milling cutter directly via Metav Werkzeuge or contact the sales team for application advice. Disc milling cutter DF112TM — 160 mm diameter, for SCMT 1204 indexable inserts (Teknik Makina) A robust disc milling cutter DF112TM designed for heavy-duty facing and slotting operations on CNC milling spindles, compatible with standard indexable inserts for fast insert changes and consistent cutting performance 160 mm diameter for high material removal 12 cutting edges for consistent cutting Compatible with SCMT 1204 indexable inserts 40 mm arbor bore and 16 mm cutting height Higher throughput through larger cutter geometry With a 160 mm diameter and 12 cutting edges, this disc cutter delivers elevated material removal rates that shorten cycle times while maintaining a predictable chip load. The specified 50 mm axial depth allows deeper engagement where permitted by the machining strategy, reducing the need for multiple passes. In practical terms, the larger cutter diameter spreads cutting forces over more edges, which helps to stabilise the process and supports higher productivity on roughing and semi-finishing operations. Secure insert clamping for repeatable accuracy Engineered for indexable inserts of type SCMT 1204, the cutter uses torque-controlled fastenings to ensure repeatable seating of the inserts. The fastener specification M5x12 and matching key T20 provide a robust clamping interface that simplifies replacement and reduces the risk of misalignment. The modular insert system reduces downtime, as worn cutting edges are replaced quickly without removing the whole tool, translating into better machine utilisation and lower tooling costs per part. Straightforward mounting and stable cutting behaviour The cutter is supplied with a 40 mm arbor bore, enabling direct mounting in common arbors or holders and easing tool changeover in standard tool magazines. A 16 mm cutting height is matched to the insert geometry to maintain a stable engagement profile, while the total mass of 1.634 kg contributes to damping of vibrations during interrupted cuts. These features combine to offer a predictable, easy-to-set-up tool that integrates into existing machining centres without complex adaptations. Practical uses and machining approach Designed primarily for facing and slotting tasks, this disc milling cutter performs well in operations that require a balance between stock removal and dimensional control. The use of replaceable inserts means that the cutter body can remain in service while individual cutting edges are rotated or replaced as required, making the system cost-effective for batch production and maintenance-friendly in job-shop environments. For best results, select feed rates and depths of cut that match the chosen insert grade and the machine’s rigidity to exploit the cutter’s geometry. Contact Metav Werkzeuge for tailored application recommendations, availability of technical drawings for DF112TM and assistance with insert selection — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: DF112TM Manufacturer: Teknik Makina Core measurements Diameter: 160 mm Cutting edges: 12 Axial depth (ap): 50 mm Cutting height: 16 mm Arbor bore: 40 mm Weight: 1.634 kg Design & features Compatible with SCMT 1204 indexable inserts Fastening screw: M5x12 Torx key size: T20 Disc milling / indexable insert design FAQ Which insert type fits this cutter? The cutter is designed for SCMT 1204 indexable inserts; Teknik Makina specifies this form for correct seating and cutting geometry. What arbor diameter is required for mounting? Mounting requires a 40 mm arbor bore; adaptors or holders should match this diameter for secure installation of the DF112TM. How many cutting edges does the tool provide? The disc milling cutter uses 12 cutting edges, which spreads cutting forces and supports steady material removal. What tools are needed to change inserts? Insert changes use an M5x12 fastening screw and a T20 Torx key for secure, repeatable clamping of the SCMT 1204 inserts on the DF112TM. Is a technical drawing or CAD file available? Technical drawings and CAD data are often available on request; refer to the DF112TM product documentation when planning holder compatibility and toolpaths. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a Ø160 mm cutting diameter, compatibility with SCMT 09T3 indexable inserts and a 40 mm arbor delivers consistent material removal and straightforward tooling integration; order the DF110TM via Metav Werkzeuge or consult the specialists for application advice. DF110TM – Teknik Makina face milling cutter, Ø160 mm, 40 mm arbor A robust DF110TM face milling cutter designed for efficient face milling and heavy-duty finishing tasks in workshop and production environments Ø160 mm cutting diameter 40 mm arbor for secure mounting Fits SCMT 09T3 indexable inserts 12 mm cutting height, robust design Faster chip removal for higher throughput The large Ø160 mm diameter combined with a recommended axial depth (ap 50 mm) enables a significantly higher material removal rate compared with smaller heads, reducing cycle times on repetitive face milling tasks. By using SCMT 09T3 indexable inserts the tool converts insert technology into predictable performance: the insert geometry controls chip formation and allows repeatable surface quality. This results in fewer tool changes per production shift and a measurable increase in machining efficiency for serial operations. Secure clamping and rapid insert replacement Designed for stability, the head mounts on a 40 mm arbor for positive positioning and reduced flute chatter; the system weight of 1.313 kg contributes to steady cutting even under heavier feeds. Inserts are fixed with an M4x11 Torx screw and accessed with a T15 key, which simplifies service routines and shortens downtime during index or replacement operations. The 12 mm cutting height offers a substantial engagement length for finishing passes while maintaining insert rigidity and predictable wear patterns. Practical workshop use and supply simplicity Engineered for practical deployment in general machining shops, the milling head accepts widely available SCMT 09T3 inserts, easing stock management and ensuring quick access to consumables. The modular approach—separate replaceable inserts and a standard 40 mm arbor—reduces capital tied up in specialised cutters. Operators and procurement benefit from compatibility with common insert ranges and the reliability that comes from straightforward mechanical fixing, making the cutter a pragmatic choice for mixed-production environments. For high-efficiency face milling and reliable insert compatibility, contact Metav Werkzeuge to discuss supply options or request tailored application guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: DF110TM Brand: Teknik Makina Designation: face milling cutter Diameter: 160 mm Arbor diameter: 40 mm Cutting height: 12 mm Recommended axial depth: 50 mm Indexable inserts: SCMT 09T3 Torx screw: M4x11 Torx key size: T15 Weight: 1.313 kg Facts Ø160 mm 40 mm 12 mm ap 50 mm 1.313 kg M4x11 T15 Special features Accepts SCMT 09T3 indexable inserts Torx fixing for insert retention Arbor-mounted design for secure clamping Compact workshop weight for easy handling FAQ What inserts are compatible with this cutter? The cutter is specified for SCMT 09T3 indexable inserts; Teknik Makina supplies the DF110TM as a head designed around that insert format. Which arbor size is required for mounting? Mounting requires a 40 mm arbor bore; this ensures stable seating and reduces run-out during face milling operations with the DF110TM. How is the insert secured and serviced? Inserts are secured with an M4x11 Torx screw; a T15 key is used for tightening and replacement to simplify maintenance cycles. Is the DF110TM suitable for finishing passes? Yes—its 12 mm cutting height and insert geometry provide rigidity and consistency suited to finishing operations in a production setting. What benefits does the larger diameter bring to production? The Ø160 mm diameter increases effective cutting engagement and chip evacuation, supporting higher material removal rates and improved throughput with the DF110TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precise geometry, easy insert handling and measurable performance: the DF182TM disc cutter delivers consistent slotting and face milling with its Ø160 mm diameter and CCMT 0602 compatibility. Order directly via Metav Werkzeuge or consult the technical team for integration advice. DF182TM disc cutter — Ø160 mm, for CCMT 0602 inserts (Teknik Cutting Tools) The DF182TM disc cutter is engineered for industrial slotting and peripheral milling, offering a compact cutter body designed to accept CCMT 0602 indexable inserts for fast, reliable insert changes in production environments. Ø160 mm cutter body Compatible with CCMT 0602 inserts 8 mm cutting height 40 mm arbor bore Faster cycle times through optimised cutter geometry The robust body and tooth arrangement reduce vibration and support stable chip formation, which improves machining efficiency. With a nominal Ø160 mm diameter and 16 teeth, the tool enables smooth engagement and even load distribution across the insert pockets. This results in shorter non-cutting times and more predictable cycle times for repetitive slotting or face operations. The design supports consistent chip evacuation and repeatable surface results, helping to increase throughput in batch production. Straightforward insert system and secure clamping Tool changes and reconditioning are efficient thanks to the use of standard CCMT 0602 indexable inserts and secured fastening. Each insert is held by Torx M2.5x7 screws tightened with a T08 key, offering repeatable clamping torque and minimal setup effort. The cartridge-style pockets allow simple indexing of worn cutting edges, reducing downtime compared with brazed or solid cutters. Clear mechanical fixation ensures reliable seating of the inserts and reduces the need for frequent rework of the cutting geometry. Practical mounting and accessibility for common toolholders The cutter features a central arbor bore of 40 mm, enabling secure mounting to compatible arbors and arbors with standard interfaces. The 8 mm cutting height balances material removal per tooth with insert strength, making the cutter suitable for stable slotting depths up to the indicated engagement. At a mass of approximately 0.996 kg, the body is easy to handle during tool changes yet substantial enough to support vibration damping and maintain alignment under load. This combination reduces setup complexity and supports rapid tool replacement in the workshop. Reliable service life and workshop convenience The use of off-the-shelf CCMT 0602 inserts keeps running costs predictable and simplifies inventory management, since replacement inserts and screws are widely available. The cutter’s multiple cutting edges allow incremental re-indexing rather than full regrinding, extending the time between consumable purchases. For purchasers seeking dependable supply and technical guidance, Metav presents a consolidated sourcing option and technical consultancy to ensure the cutter integrates seamlessly into existing tool chains. Choose Teknik Cutting Tools' DF182TM disc cutter for dependable slotting performance and contact Metav Werkzeuge for tailored technical support and order coordination at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DF182TM Manufacturer: Teknik Makina Product: disc cutter Facts Diameter: 160 mm Cutting edges: 16 Cutting height: 8 mm Arbor bore: 40 mm Max recommended engagement (ap): 50 mm Weight: 0.996 kg Special features For indexable inserts: CCMT 0602 Fastening screw: Torx M2.5x7 Torx key size: T08 Body type: disc cutter FAQ What inserts does this cutter accept? The DF182TM accepts CCMT 0602 indexable inserts; the pocket design is optimised for that insert geometry for quick indexing and secure clamping. What arbor size is required to mount the cutter? The cutter has a 40 mm arbor bore and requires a matching arbor or adaptor to ensure correct concentricity and secure mounting. How many cutting edges are fitted to the cutter body? The tool is supplied for 16 cutting edges, providing a balance between material removal rate and surface smoothness. What is the cutting height and its practical implication? The cutting height is 8 mm, which defines the maximum vertical engagement of the insert and is suitable for moderate slot depths while maintaining insert stability. Which torque tool is used to secure the inserts? Inserts are fastened with Torx M2.5x7 screws tightened using a T08 Torx key, giving repeatable clamping performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high‑performance milling solution that combines robust mounting with broad insert compatibility for reliable productivity. The combination of a 40 mm bore, a 45° cutting angle and compatibility with SNKX 1206 indexable inserts supports efficient surface milling and low downtime — order via Metav Werkzeuge or request technical advice from the team. Face-milling head T334TM — for SNKX 1206 indexable inserts, 160 mm body (Teknik Makina) A Face-milling head T334TM engineered for heavy-duty surfacing and finishing applications using SNKX 1206 indexable inserts across a range of carbide manufacturers Compatible with SNKX 1206 indexable inserts Ø160 mm body with Ø173 mm max cutting 45° cutting angle for controlled chip formation 40 mm mounting bore for rigid clamping Increased throughput through optimised cutting geometry The milling head's 45° cutting angle and substantial cutting radius deliver steady material removal with reduced impact loads per tooth, which results in smoother surfaces and extended insert life. With an effective Ø173 mm max cutting diameter, the tool covers wide swarf paths while the body diameter of Ø160 mm maintains tool stability. This geometry is particularly suitable for medium to large face milling tasks where a balance of surface quality and productivity is required. The use of SNKX 1206 inserts allows for rapid indexation and minimal interruption during production. Stable mounting and vibration reduction for consistent results A solid 40 mm bore and the compact design help to reduce run-out and vibration during machining, supporting reproducible tolerances even under elevated cutting forces. The assembly weight of 5.38 kg and the overall length of 63 mm contribute to a low centre of gravity and predictable dynamic behaviour. These mechanical attributes lower the risk of chatter and promote longer tool life, enabling higher feed rates and improved cycle times without sacrificing finish quality. Fast servicing and wide inserts compatibility to minimise downtime Insert clamping utilises an M4x12.5 Torx screw with a T15 key, enabling quick, secure changes and straightforward maintenance routines. The head is specified for SNKX 1206 indexable inserts and is compatible with major carbide suppliers such as Böhlerit, Korloy, Palbit, facilitating supply chain flexibility. The combination of standardised fixation and widespread insert availability reduces stock complexity and helps maintain production continuity when regrinding or replacement inserts are required. For tailored configuration and supply of Teknik Makina face‑milling heads, contact Metav Werkzeuge for expert technical advice and prompt delivery from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: T334TM Manufacturer: Teknik Makina Designation: Face-milling head for SNKX 1206 indexable inserts Core dimensions Cutting diameter max: 173 mm Body diameter: 160 mm Mounting bore: 40 mm Overall length: 63 mm Weight: 5.38 kg Cutting angle: 45° Cutting edges: 12 Features Compatible with SNKX 1206 indexable inserts Compatible insert brands: Böhlerit, Korloy, Palbit Torx screw: M4x12.5, key T15 ECLASS: 21181015 FAQ Which indexable inserts fit this milling head? The face‑milling head accepts SNKX 1206 indexable inserts; compatibility with brands such as Böhlerit, Korloy, Palbit is confirmed for the T334TM. What mounting interface is required? A rigid mounting with a 40 mm bore is required; the specified 40 mm mounting shank provides the stable clamping interface for the T334TM. What is the maximum effective cutting diameter? The head offers an Ø173 mm maximum cutting diameter while the tool body measures Ø160 mm, suitable for broad surface passes. How are the inserts secured and serviced? Inserts are fastened with an M4x12.5 Torx screw using a T15 key, allowing quick replacement and secure clamping to reduce downtime. For which machining tasks is the head most suitable? The milling head is intended for face milling and surfacing operations where a combination of removal rate and surface finish is required; the 45° cutting angle supports controlled chip formation and improved surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the robust combination of high material removal capacity and straightforward insert compatibility for reliable production cycles; the 160 mm diameter and 12 cutting edges ensure consistent chip flow, while the compact 40 mm arbor and 20 mm cutting height simplify handling and setup. Order the tool directly via Metav Werkzeuge or consult our specialists for application guidance. Disc milling cutter DF192TM by Teknik Cutting Tools — 160 mm, 12 cutting edges The disc milling cutter DF192TM is a high-capacity face milling tool engineered for indexable-insert cutting in industrial machining and CNC operations. 160 mm diameter for broad face coverage 12 cutting edges for steady stock removal Compatible with CCMT 1204 inserts Robust 40 mm arbor and compact 2.65 kg mass Increase throughput with reliable cutting performance This milling assembly delivers predictable material removal thanks to its 160 mm diameter and 12 cutting edges, which together provide an even distribution of cutting load and reduced vibration. With an axial engagement capability of 50 mm, the tool is suited for heavier passes where cycle time reduction matters. The result is a measurable improvement in machining efficiency and less frequent rework, helping maintain production schedules and reduce per-part machining time. Precise compatibility and straightforward insert handling Designed for CCMT 1204 indexable inserts, the cutter supports a widely available insert format that balances cost and longevity. Indexable inserts allow rapid replacement without regrinding, lowering downtime and consumable management complexity. The 20 mm cutting height offers a secure pocket depth for insert clamping, while the supplied screw specification (M5x12) and T20 key size standardise maintenance tasks and spare-part procurement. Secure mounting and service-friendly design The tool’s 40 mm arbor interface provides a robust connection to the spindle, reducing runout and improving repeatability of cut geometry. At a weight of 2.65 kg, the assembly remains manageable for handling and fixturing while offering mass to dampen harmonic excitation. Fastening details such as the Torx screw arrangement simplify insert changes and reduce the risk of improper torque—essential for maintaining cutting-edge stability and tool life. Built for workshop integration and predictable supply This cutter integrates readily into typical workshop tool lists and is compatible with standard CCMT inserts, easing inventory consolidation. The unit’s specifications support both small-batch jobbing and higher-volume runs, making it suitable for general machining, component facing and bulk material removal. For purchasing and application advice Metav’s Emmerich hub acts as a quality filter and logistical partner, ensuring dependable delivery and technical backup. Choose Teknik Cutting Tools’ DF192TM disc milling cutter for consistent face-milling performance — contact Metav Werkzeuge for stock checks, application support or to request a cutting-parameter recommendation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DF192TM Manufacturer: Teknik Makina Product: Disc milling cutter Core data Diameter: 160 mm Cutting edges: 12 Cutting height: 20 mm Axial depth of cut (ap): 50 mm Arbor / shank diameter: 40 mm Weight: 2.65 kg Special features Compatible insert type: CCMT 1204 Torx screw: M5x12 Torx key size: T20 FAQ What materials is the cutter suitable for? The DF192TM is designed for general face-milling tasks; compatibility with specific materials depends on the chosen insert grade and machine parameters, with the cutter accepting CCMT 1204 inserts for a wide range of steels and castings. How many inserts does the tool accommodate and how are they fixed? The cutter uses 12 cutting edges supplied as indexable CCMT 1204 inserts; each insert is secured with an M5x12 Torx screw tightened with a T20 key. What spindle or arbor size is required for mounting? A robust 40 mm arbor interface is specified for stable mounting and reduced runout during operation. Can the unit handle heavy axial engagements? Yes, the specified axial depth of cut of 50 mm supports deeper passes; actual values should be adjusted according to insert grade and machine capability. Is the cutter heavy to handle during tool changes? With a mass of 2.65 kg, the assembly remains practical for manual handling while providing sufficient mass to aid vibration damping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Detailed Technical Data: Order Number: T269TM Item: Face Mill usable with OFCR 0704 Indexable Inserts Brand: Teknik Makina Quantitative Specifications: Diameter: 160mm Cutting Edges: 12 Weight: 5.112kg Total length: 62mm Diameter Connection: 40mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Available Technical Details: Item: Face Mill Brand: Teknik Makina Order Number: T416TM usable with R390-1704 Indexable Inserts the Hersteller's Sandvik Diameter: 160mm Angle: 90° Total length: 62mm Diameter Connection: 40mm Cutting Edges: 10 Weight: 5.01kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Characteristics: Order Number: T570TM Item: Face Mill usable with SEET R245 12T3 Indexable Inserts the Herstellers Sandviks, XTCs und ZCCs Brand: Teknik Makina Quantitative Specifications: Diameter: 160mm Cutting Edges: 10 Weight: 4.59kg Total length: 63mm Diameter Connection: 40mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precise cutting geometry and economical maintenance: the replaceable insert system reduces downtime while the 160 mm diameter body delivers stable, high-performance side milling; order directly via Metav Werkzeuge or request application advice from our consultants. Disc milling cutter by Teknik Makina — 160 mm diameter, 12 cutting edges The Disc milling cutter is a purpose-built indexable cutter for side milling and profiling on CNC and conventional machines, designed for fast insert changes and consistent surface finish 160 mm diameter for stable milling 12 cutting edges for fine pitch cutting Compatible with SCMT 09T3 inserts 40 mm arbor for secure attachment 10 mm cutting height for robust engagement Stable machining that increases throughput With a 160 mm diameter body and 12 cutting edges, this milling head provides a stable cutting platform that reduces vibration and promotes a consistent finish. The larger diameter contributes to improved tool rigidity, which in turn supports higher metal removal rates without sacrificing accuracy. The balanced design and modest overall mass ensure predictable behaviour in both high-speed and moderate-feed operations, helping production processes run more smoothly and reliably. Faster service life and lower process costs through indexable inserts The cutter accepts SCMT 09T3 indexable inserts, allowing worn edges to be rotated or replaced instead of changing the entire tool. Insert retention relies on M4x11 Torx screws tightened with a T15 key, enabling secure fastening and straightforward service procedures. This configuration reduces machine downtime and simplifies spare-part logistics. Economically, replaceable inserts convert cutting-edge changes into quick maintenance steps, improving uptime and lowering overall tooling costs. Precise set-up and dependable compatibility with machine spindles Engineered for straightforward integration, the tool features a 40 mm arbor for rigid mounting and a 10 mm cutting height that supports substantial engagement when profiling. The axial capacity indicated by ap 50 mm suits a wide range of side-milling passes while the compact 1.28 kg mass facilitates handling and rapid tool changes. Together these dimensions make the cutter suitable for batch production and series work where repeatability and setup speed are priorities. For a tailored recommendation on Teknik Cutting Tools’ disc milling cutter DF108TM and to arrange supply from Metav Werkzeuge, contact Metav Werkzeuge GmbH in Emmerich by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com to discuss application specifics and delivery options Technical data Article number: DF108TM Brand: Teknik Makina Insert type: SCMT 09T3 Facts Diameter: 160 mm Cutting edges: 12 Axial depth (ap): 50 mm Cutting height: 10 mm Arbor / attachment diameter: 40 mm Weight: 1.28 kg Special features Torx screw: M4x11 Torx key: T15 For indexable inserts Replaceable cutting edges FAQ What insert type does this cutter use? The cutter accepts SCMT 09T3 indexable inserts, specified for the Teknik Cutting Tools disc milling cutter DF108TM to allow quick rotation or replacement of cutting edges. How many cutting edges are available on the tool? The milling tool is equipped with 12 cutting edges, which helps to distribute cutting forces and achieve a fine pitch for improved surface quality. What arbor size is required for mounting? The tool uses a 40 mm arbor diameter for secure attachment to the spindle when installing the DF108TM disc milling cutter. What is the recommended method for changing inserts? Replace or index the SCMT 09T3 inserts using the M4x11 Torx screws and a T15 key; this ensures secure fastening and straightforward maintenance. Is the cutter suitable for CNC operations? Yes, the robust design and standard arbor interface make the cutter suitable for CNC machining as well as conventional milling setups, delivering repeatable performance for series production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust cutting solution that combines efficient indexable inserts, a broad 160 mm cutting diameter and straightforward maintenance for uninterrupted milling operations. Order the disc milling cutter directly via Metav Werkzeuge or consult their specialists for application guidance. Disc milling cutter DF186TM — 160 mm indexable cutter for CCMT 09T3 inserts (Teknik Makina) The disc milling cutter DF186TM is an indexable tool engineered for medium-depth milling operations where rapid insert changes and consistent cutting geometry are required. 160 mm diameter for broad coverage 14 cutting edges for stable material removal Accepts CCMT 09T3 indexable inserts Ø40 mm arbor with 12 mm cutting height Faster material removal with reliable insert technology The cutter is designed to deliver consistent throughput by using indexable inserts; the CCMT 09T3 designation indicates a common, easily sourced insert format that permits quick rotation or replacement when edges wear. With a 160 mm diameter and 14 cutting edges, the tool spreads cutting forces across multiple seats, which reduces instantaneous load per edge and helps maintain feed rates. A maximum cutting depth of 50 mm allows for deeper, more productive passes where component geometry and machine capacity permit, reducing the number of required tool changes and improving cycle efficiency. Secure mounting and predictable running for precision results Mounting and serviceability are simplified by the tool’s Ø40 mm arbor interface and standardised fastenings: M3.5 x 9 Torx screws and a T15 key. The 12 mm cutting-edge height ensures compatibility with the specified CCMT inserts and supports adequate chip evacuation for many workshop tasks. At a mass of 1.36 kg, the assembly balances rigidity with manageable inertial load, contributing to a stable spindle interaction and reduced vibration during passes. These attributes translate into more predictable surface finishes and repeatable component tolerances when the cutter is integrated into a controlled machining setup. Practical benefits for workshop and production environments Using an indexable disc cutter such as this reduces tooling downtime: worn edges can be swapped without removing the entire tool from the spindle, and insert inventories are typically smaller and less costly than complete solid-head replacements. The cutter’s configuration is suited to operations that prioritise tool life economy and rapid turnaround. When configured correctly on compatible machinery, the result is improved process reliability and a lower total cost of ownership for milling tooling over time — a pragmatic advantage for production shops and jobbing environments alike. Contact Metav Werkzeuge today to discuss how the Teknik Makina DF186TM can be integrated into current production lines and to request tailored advice from their precision tooling specialists Technical specifications Article number: DF186TM Manufacturer: Teknik Cutting Tools (Teknik Makina) Facts Diameter: 160 mm Number of cutting edges: 14 Maximum cutting depth (ap): 50 mm Arbor / bore diameter: Ø40 mm Cutting-edge height: 12 mm Weight: 1.36 kg Special features Indexable inserts: CCMT 09T3 Torx screw: M3.5 x 9 Torx key size: T15 Designed for straightforward insert replacement FAQ Which inserts are compatible with this cutter? The cutter is made for CCMT 09T3 indexable inserts; these inserts fit the available seats and match the specified 12 mm cutting-edge height. What arbor size is required for mounting? Mounting requires an arbor or adapter with a bore of Ø40 mm, matching the cutter’s standard internal diameter for secure fitting. How many cutting edges does the cutter provide? The tool offers 14 cutting edges, which helps distribute cutting forces and supports stable machining at suitable feed rates. Which screws and key are needed to secure the inserts? Insert clamping uses M3.5 x 9 Torx screws and a T15 Torx key for assembly and replacement. Is the cutter suitable for deep cuts? The disc milling cutter supports a maximum cutting depth of 50 mm, enabling deeper passes where machine capacity and workpiece setup allow. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of high cutting capacity, quick insert changes and secure clamping for consistent milling results; order the tool via Metav Werkzeuge or consult the Metav team for specification advice. DF190TM — Indexable disc milling cutter, 160 mm diameter, CCMT 1204 compatible (Teknik Makina) The DF190TM is an indexable disc milling cutter designed for CNC and milling centre applications that require efficient material removal with CCMT 1204 indexable inserts. *160 mm diameter for wide material engagement *12 cutting edges for efficient material removal *Compatible with CCMT 1204 indexable inserts *40 mm shank for secure toolholder clamping Faster metal removal with broad cutting engagement The large 160 mm diameter and 12 cutting edges deliver a high engagement per revolution, reducing cycle times on wide faces and shoulders. Combined with the specified axial depth of 50 mm, the tool supports deeper cuts where the machine and process allow, increasing throughput without compromising stability. The use of indexable CCMT 1204 inserts avoids full-tool regrinding: when an insert edge is spent, it can be rotated or replaced rapidly, restoring cutting performance and lowering machining downtime. Stable clamping and predictable run-out for repeatable precision A robust 40 mm shank diameter and well-defined mounting interfaces ensure secure clamping in standard toolholders, reducing vibration and run-out. The cutter’s cutting height of 16 mm provides sufficient insert support for axial loads, while the supplied fastening hardware specification (M5x12 Torx screws, T20 key) simplifies maintenance and insert replacement. Together these details promote consistent surface quality and dimensional repeatability in serial production. Practical handling and straightforward serviceability The indexable design prioritises maintainability: individual CCMT inserts are changed in situ using the T20 key, which shortens service intervals compared with brazed or solid tools. The tool’s moderate weight of 1.727 kg balances rigidity with manageable handling for workshop staff, making it suitable for rapid changeovers in job- and batch-production environments. Technical clarity around fastening and insert type reduces setup errors and expedites reconditioning. Designed for industrial workflows and reliable supply Engineered as a dedicated cutting solution for CNC milling tasks, the disc cutter integrates easily into existing tool inventories that use standard CCMT insert geometries. Its construction supports process stability and predictable tool life when paired with appropriate insert grades and cutting parameters. For buyers seeking dependable delivery and technical backup, Metav’s European supply and advisory services help bridge specification to shop‑floor use. Speak to Metav Werkzeuge in Emmerich for tailored tooling advice and reliable supply — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: DF190TM Manufacturer: Teknik Makina eClass: 21180704 ETIM: EC011860 Facts Diameter: 160 mm Cutting edges: 12 Shank diameter: 40 mm Cutting height: 16 mm Axial depth (ap): 50 mm Weight: 1.727 kg Fastening: M5x12 Torx screws, key T20 Special features Compatible with CCMT 1204 indexable inserts Indexable design for quick insert changes Indexable insert type specified for predictable serviceability Suitable for CNC and milling centre use FAQ Which insert type does the cutter use? The DF190TM is designed for CCMT 1204 indexable inserts; the cutter accepts standard CCMT geometries for economical edge changes. How many cutting edges are available per tool body? The tool body features 12 cutting edges, allowing multiple insert corners to be used per indexable plate for extended life. What shank size is required for the toolholder? A 40 mm shank diameter is specified for secure clamping in compatible toolholders. Which screw and key are needed for insert fastening? Fastening is achieved with M5x12 Torx screws; a T20 Torx key is indicated for safe tightening and replacement. Is the cutter suitable for deep cuts? The cutter specification lists an axial depth value of 50 mm, which supports deeper passes where machine rigidity and process parameters permit. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust indexable‑insert design with 160 mm diameter and 16 cutting edges to maintain cycle times and reduce downtime; combine this with a rigid 40 mm mounting and 50 mm ap for stable heavy engagement — order the disc milling cutter directly via Metav Werkzeuge or consult our specialists for application advice. Disc milling cutter DF184TM — 160 mm, 16 cutting edges, Teknik Makina The Disc milling cutter DF184TM is a high‑performance side cutter designed for medium to heavy machining, accepting CCMT 0602 indexable inserts for economical resurfacing and slotting operations. 160 mm diameter for high material removal 16 indexable cutting edges for even load distribution 40 mm mounting for rigid clamping Compatible with CCMT 0602 inserts for economy Consistent productivity through high engagement and stable cutting With a large 160 mm cutter body and 16 cutting edges, this tool is engineered to sustain high material removal rates while keeping individual insert loads low. The combination of many edges and a substantial cutter diameter supports longer tool life and fewer insert changes, which increases machine uptime and lowers per‑part machining cost. The specified 50 mm radial engagement (ap) enables more aggressive passes where the machine and workpiece setup permit, translating into shorter cycle times and improved throughput. Secure clamping and simple insert change for reliable operation A 40 mm mounting diameter gives the cutter excellent rigidity in the arbor, reducing vibration and improving surface finish consistency. Insert retention uses M2.5x7 Torx screws matched to a T08 key, allowing straightforward and repeatable clamp torque during maintenance. The modest cutter weight of 1.228 kg balances handling convenience with the mass needed for cutting stability; clear torque and screw size specifications simplify workshop procedures for insert replacement and reassembly. Optimised cutting geometry for orderly chip formation Accepting CCMT 0602 inserts, the cutter’s geometry supports efficient chip formation and evacuation across multiple cuts. A cutting height of 10 mm ensures sufficient material engagement for common faces and slots without compromising insert clamping. The distributed cutting pattern helps to avoid concentrated thermal loads on individual inserts, which benefits dimensional stability on long batches and helps maintain consistent component tolerances during extended runs. Practical advantages for everyday workshop use Designed for compatibility with standard indexable inserts, the disc milling cutter reduces inventory complexity and supports cost‑effective tool management. The clear, documented specifications — including screw type, key size, mounting diameter and cutting height — allow quick integration into existing tool systems. For technical queries or confirmation of suitability for a specific machining task, Metav Werkzeuge provides application guidance and can supply matching inserts and accessories. Contact Metav Werkzeuge for tailored cutting solutions with the DF184TM — discuss suitable insert grades, clamping setups or batch strategies directly with Metav Werkzeuge; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: DF184TM Manufacturer: Teknik Makina Numbers / Core technical data Diameter: 160 mm Cutting edges: 16 Mounting diameter: 40 mm Cutting height: 10 mm Depth of cut (ap): 50 mm Weight: 1.228 kg Special features / Design For indexable inserts: CCMT 0602 Torx screw: M2.5x7 Torx key: T08 Disc milling cutter design for side/face operations FAQ What insert type does this cutter use? The DF184TM is designed for CCMT 0602 indexable inserts, enabling economical replacement and broad material coverage with the appropriate insert grade. What is the maximum radial engagement recommended? A radial engagement of 50 mm (ap) is specified for the cutter and allows high material removal when machine power and fixturing are adequate. Which mounting diameter is required for secure clamping? The cutter requires a 40 mm mounting bore to ensure rigid clamping and minimise vibration during machining. How are the inserts secured and which tool is required? Inserts are fastened with M2.5x7 Torx screws using a T08 key for repeatable clamp torque and simple maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust milling solution that combines dependable compatibility with HNHX 1006 indexable inserts and a generous Ø160 mm cutting diameter for consistent stock removal; order the tool directly via Metav Werkzeuge or request advice from our consultants. Face milling head — Ø160 mm milling cutter head for HNHX 1006 indexable inserts (Teknik Makina) A compact, heavy‑duty face milling head engineered for stable finishing and medium‑duty roughing on conventional and CNC milling spindles Ø 160 mm machining diameter Compatible with HNHX 1006 indexable inserts 55° cutting angle for improved surface quality Torx M5x12 fastening, T20 key required Reliable capacity and precise balancing for efficient material removal The milling cutter is built around a Ø 160 mm head that offers a broad engagement zone while keeping vibration low; this allows a steady material removal rate and improved tool life. The 12 cutting edges configuration spreads cutting forces, which results in less stress per edge and a smoother load profile. The solid 40 mm shank diameter ensures stable clamping in standard toolholders, while the measured mass of 4.724 kg contributes to consistent spindle dynamics. These characteristics translate into predictable cycle times and reproducible part quality in serial production. Quick insert changes and straightforward assembly reduce downtime Designed for use with HNHX 1006 indexable inserts from Taegutec, the head uses M5x12 Torx screws secured with a T20 key for repeatable seating and simple maintenance. Indexable inserts enable rapid edge changes without regrinding — worn edges are replaced rather than resharpened, lowering turnaround time. The 55° cutting angle promotes a favourable chip flow for machined faces, which helps achieve improved surface finish with fewer passes. Clear mechanical connections and standardised fixing hardware make the assembly process transparent for workshop technicians. Versatile compatibility for workshop and industrial environments This tool is suited to general workshop and light industrial use where flexibility and ease of handling are valued. Compatibility with Taegutec insert geometries provides access to a wide range of grades for steel, stainless steel and cast iron applications (select inserts according to material). The robust construction and standard interface allow integration into existing toolsets without special adapters. The item is identifiable as SKU T478TM and carries the Teknik Makina designation, offering a recognised mechanical solution where durable mounting and repeatability are priorities. For procurement or technical advice on the Teknik Makina face milling head with Ø160 mm capacity, contact Metav Werkzeuge for detailed guidance and ordering support — info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T478TM Manufacturer: Teknik Makina Designation: Face milling head for HNHX 1006 indexable inserts Compatible insert type: HNHX 1006 Facts Diameter: 160 mm Shank / mounting diameter: 40 mm Overall length: 62 mm Weight: 4.724 kg Number of cutting edges: 12 Cutting angle: 55° Special features Torx screw: M5x12 Torx key size: T20 Compatible insert manufacturer: Taegutec SKU: T478TM FAQ What inserts fit this milling head? The face milling head accepts HNHX 1006 indexable inserts; compatible insert grades from Taegutec are commonly used for varied materials. Which fastening hardware is required for mounting the inserts? Insert clamping is achieved with M5x12 Torx screws tightened using a T20 key, as specified for secure and repeatable seating. Is the tool suitable for standard toolholders? Yes — the 40 mm shank diameter is designed for conventional toolholder systems, offering stable clamping for routine milling operations. What is the SKU and who manufactures the head? The product is listed as T478TM and is produced by Teknik Makina; Metav Werkzeuge can provide procurement and compatibility advice. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com