Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a large cutting diameter and multiple cutting edges combined with a sturdy 40 mm arbor for stable, high‑throughput milling; order the DF114TM disc milling cutter via Metav Werkzeuge or request a consultation from their technical advisers for availability and cutting recommendations. DF114TM Disc Milling Cutter – Ø160 mm, for SCMT 1204 inserts (Teknik Makina) The DF114TM disc milling cutter is designed for indexable milling applications where a broad cutting circle and straightforward insert replacement support continuous production on industrial milling equipment Ø160 mm diameter for broad contact area Accepts SCMT 1204 indexable inserts 40 mm arbor for stable mounting High-capacity cutting for efficient material removal The Ø160 mm cutting diameter combined with 12 cutting edges provides a large engagement area that reduces the number of passes required for bulk material removal. With an axial depth parameter of 50 mm, the tool supports deeper cuts per pass where the machine and process allow, contributing to shorter cycle times. This configuration is particularly effective when cycle stability and consistent stock removal are priorities, because the distributed cutting load helps to moderate peak forces and maintain steady spindle load. Stable clamping and straightforward maintenance A 40 mm arbor diameter delivers a secure interface to common arbors and holders, enhancing runout control and vibration damping during operation. The assembly uses M5x12 Torx screws and a T20 key for indexable insert retention, a choice that facilitates quick, repeatable insert changes and resists cam‑out under torque. At 2.145 kg, the cutter balances mass for inertia with manageable handling during set‑up and tool changes, supporting efficient shopfloor routines and reduced downtime for maintenance. Fast insert swaps and cost-effective tooling Compatibility with SCMT 1204 indexable inserts enables rapid replacement and straightforward inventory management. Indexable inserts minimise non‑productive time: worn corners are indexed or the insert is replaced without regrinding a tool body, which keeps the cutter in service and lowers per‑cutting‑edge cost. The 20 mm cutting height offers sufficient insert projection for medium engagement depths while keeping insert support stable; this helps to preserve edge life and predictability in finishing passes. Engineered for integration in production workflows The disc milling design is suited to continuous workshop and industrial use where tool change speed and predictable cutting behaviour matter. The combination of a large diameter, multiple edges and robust mounting supports consistent performance on horizontal and compatible vertical milling centres. Supplied through Metav Werkzeuge’s distribution in Emmerich, the tool benefits from an established logistics and quality filter intended to ensure rapid availability and reliable delivery into European production environments Contact Metav Werkzeuge to request detailed availability, recommend suitable inserts and adapters for the DF114TM disc milling cutter, or arrange a technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DF114TM Manufacturer: Teknik Makina Type: Disc milling cutter Core data Diameter: 160 mm Number of cutting edges: 12 Cutting height: 20 mm Arbor diameter: 40 mm Axial depth (ap): 50 mm Weight: 2.145 kg Special features Insert compatibility: SCMT 1204 Torx screw: M5x12 Torx key size: T20 FAQ Which inserts are compatible with this cutter? The DF114TM uses SCMT 1204 indexable inserts; these inserts are compatible with the cutter’s pocket geometry and enable quick indexing or replacement. What arbor or bore is required for mounting? A 40 mm arbor interface is specified; the cutter is intended to be mounted on a matching arbor or adapter with a stable clamping system. How many cutting edges does the cutter provide during operation? The tool presents 12 cutting edges around the circumference, which shares the cutting load and allows higher material removal per revolution. What axial depth can be taken in a single pass? An axial depth parameter of 50 mm is indicated; actual allowable depth depends on machine rigidity and process settings. Are the insert screws and key size standardised for maintenance? Yes, insert fastening uses M5x12 Torx screws and a T20 key, simplifying routine insert changes and torque control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a combination of precise 45° cutting geometry and broad insert compatibility for reliable facing operations; the rigid 40 mm shank and secure M5x12 Torx fastening reduce vibration and setup time. Order the face milling head directly via Metav Werkzeuge or consult their specialists for application advice. Face milling head by Teknik Makina – 160 mm, 45° cutting angle Face milling head for SNKX 1606 and ONHX 0606 indexable inserts, built for stable, high-efficiency facing and light roughing in production environments Face milling head for SNKX/ONHX inserts 160 mm diameter with 45° cutting angle Shank Ø 40 mm for rigid mounting Fixing screw M5x12; Torx T20 key Faster material removal with consistent surface quality The 160 mm diameter and 45° cutting angle deliver an efficient cutting geometry that balances material removal rate and surface finish. With 10 cutting edges, the tool head spreads cutting forces across multiple inserts, which reduces individual insert load and extends usable tool life. The design supports stable chip flow and predictable cutting behaviour, enabling shorter cycle times on facing passes without compromising finish quality. This geometry is particularly suited to medium-duty facing where a combination of productivity and consistent results is required. Stable clamping and quick insert service to cut downtime A 40 mm shank and a total mass of 4.712 kg provide the rigidity needed to keep vibration low during operations, improving tool life and part accuracy. The insert seats are secured with M5x12 screws tightened with a T20 Torx key, ensuring repeatable clamping torque and straightforward replacement. The secure fixing arrangement reduces setup variation and makes insert changes rapid and reliable, helping to maintain throughput on busy shopfloors. The compact overall length of 63 mm assists with clearance in many turret and arbor configurations. Broad compatibility for flexible workshop integration Engineered for SNKX 1606 inserts and compatible with ONHX 0606 (including Palbit ONHX 0606 as an alternative), the head supports a common insert family that is widely stocked, simplifying spare-part management. The combination of robust mounting, proven insert standards and a 45° approach angle makes this cutter head a practical choice for a variety of facing tasks across light and medium machining centres. Supplied as a ready-to-fit unit, the head integrates into standard tool-change routines and is suitable for shops looking to standardise on dependable, indexable-insert tooling. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina face milling head and to arrange supply directly from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T633TM Manufacturer: Teknik Makina Designation: Face milling head for SNKX 1606 and ONHX 0606 indexable inserts Core technical data Diameter: 160 mm Overall length: 63 mm Shank diameter: 40 mm Weight: 4.712 kg Cutting angle: 45° Number of cutting edges: 10 Compatibility and special features Accepts SNKX 1606 inserts Alternative: ONHX 0606 Palbit Fixing screw: M5x12 (Torx T20) 40 mm shank for secure mounting FAQ What inserts fit this cutter head? The Teknik Makina face milling head accepts SNKX 1606 indexable inserts and is also compatible with ONHX 0606, including Palbit ONHX 0606 as an alternative. What are the key dimensions for mounting? Shank diameter is 40 mm, overall length 63 mm and cutter diameter 160 mm, providing a rigid interface for many turrets and arbors. Which fasteners are used for insert clamping? Insert clamping uses M5x12 screws; a T20 Torx key is specified for reliable tightening and repeatable clamping torque. How does the 45° cutting angle affect machining? The 45° cutting angle reduces axial cutting forces and improves surface finish on facing passes while maintaining efficient material removal. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust cutting capacity, secure clamping and proven compatibility for reliable face-milling performance; order the face-milling head directly via Metav Werkzeuge or ask the consultants for application advice Face-milling head T422TM — 160 mm diameter, for HNGX 0906 indexable inserts by Teknik Makina The face-milling head T422TM is designed for heavy-duty surface milling with HNGX 0906 indexable inserts and standard toolholders Face mill Ø160 mm for HNGX 0906 12 cutting edges for high material removal 40 mm shank for secure toolholder fit Compatible with Pramet indexable inserts Shorter cycle times through higher cutting capacity The face-milling head delivers increased material removal thanks to its Ø160 mm diameter and 12 cutting edges, which together allow larger table feed per revolution and fewer passes. The 55° cutting angle reduces cutting forces while maintaining an efficient chip flow; this geometry helps maintain surface quality at elevated feed rates and supports economical machining strategies in production environments. Specifying an indexable system keeps tooling turnover fast and repeatable, reducing non-productive time and supporting a predictable machining cycle. Secure clamping and straightforward maintenance reduce downtime Designed for stable mounting, the unit features a 40 mm shank and is supplied with M4.5x11 Torx screws secured by a T15 key for repeatable insert seating. The solid mass of 3.962 kg balances stiffness and vibration damping, improving tool life and insert performance under load. Quick insert changes and standardised fasteners cut maintenance time; fewer interruptions mean smoother production and lower total cost of operation over the life of the cutter head. Flexible fleet compatibility for mixed-toolshops Built to accept HNGX 0906 indexable inserts and to work with Pramet inserts, the head integrates into existing indexable-insert systems without custom adapters. The T422TM suits face-milling tasks where high stock removal and consistent surface finish are required, supporting standardisation across toolrooms. Supplied documentation and file references simplify tool management and spare-part ordering, enabling straightforward replacement planning and consistent process control. Speak to Metav Werkzeuge to discuss integrating the Teknik Makina face-milling head into the production line and to confirm available inserts and delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T422TM Brand: Teknik Makina Product: Face-milling head for HNGX 0906 indexable inserts Suitable for inserts manufacturer: Pramet Diameter: 160 mm Shank diameter: 40 mm Overall length: 63 mm Weight: 3.962 kg Cutting angle: 55° Cutting edges: 12 Compatible inserts: HNGX 0906 Compatible insert brands: Pramet Torx screw: M4.5x11 Torx key: T15 Files (migration): 62d941bca9cff922f4700ce1, 62d941bc2cb5a5457b1a9eba FAQ Which insert type is required for this cutter head? The T422TM face-milling head is designed for HNGX 0906 indexable inserts and accepts compatible Pramet grades for the application. What shank size and mounting are needed? The face-milling head features a 40 mm shank diameter and is intended for holders that accept a 40 mm tool neck. How many cutting edges does the head provide and what is the angle? The T422TM supplies 12 cutting edges with a 55° cutting angle, optimised for higher feed and stable cutting. Which fasteners are used for insert clamping? Insert clamping on the face-milling head is via M4.5x11 Torx screws, tightened with a T15 key for secure seating and easy replacement. Is the cutter head compatible with Pramet inserts? Yes, the T422TM is compatible with Pramet indexable inserts in the HNGX 0906 format and integrates into standard indexable systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a combination of high material removal capacity and repeatable clamp security for uninterrupted facing operations; the robust 160 mm diameter cutter body with 12 cutting edges and a 45° geometry delivers efficient stock removal and improved surface finish. Order the T801TM directly via Metav Werkzeuge or consult the specialists for configuration advice. Face milling head T801TM for ONMU 0505 indexable inserts — 160 mm, 12 edges (Teknik Cutting Tools) Face milling head T801TM designed for heavy-duty facing applications using ONMU 0505 indexable inserts; suitable for industrial milling where rigidity and reproducible results are required Face milling head for ONMU 0505 inserts 160 mm diameter, 12 cutting edges 45° cutting angle for effective facing 40 mm shank diameter, secure M5x12 fixation Consistent removal rate and improved surface quality The robust cutter body offers a 160 mm diameter and a 45° cutting angle, which together reduce cutting forces and spread load across multiple edges. This geometry leads to a steadier feed and a finer finished surface when facing billets or large flanges. With a 12 cutting edges configuration, wear is distributed evenly, allowing longer intervals between indexings and fewer tool changes — a direct benefit for cycle-time critical production. Rigidity and reliable insert clamping for repeatable accuracy A solid 40 mm shank and a secure clamping system that uses an M5x12 Torx screw tightened with a T20 key ensure the cutter maintains position under load. The heavy tool mass contributes to vibration damping, which supports dimensional stability during passes. Clear mechanical fixing reduces the risk of micro-movement at the insert seat and helps preserve cutter geometry, translating into repeatable part accuracy across production batches. Compatibility and practical maintenance for continuous use Engineered specifically for ONMU 0505 indexable inserts and compatible with ISCAR plate types, the head simplifies tooling inventories by standardising on a common insert form. The layout permits quick insert indexing and straightforward screw access for maintenance, lowering downtime. The compact overall length and balanced edge count support both rough facing and semi-finishing tasks while keeping handling and storage straightforward. For procurement of the Teknik Cutting Tools face milling head T801TM and expert advice on integration, contact Metav Werkzeuge for efficient supply from Emmerich and tailored technical support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: T801TM Manufacturer: Teknik Makina Product: Face milling head (Planmesserkopf) Suitable for: ONMU 0505 indexable inserts (ISCAR) Torx screw: M5x12 Torx key: T20 Core dimensions Diameter: 160 mm Cutting edges: 12 Cutting angle: 45° Shank diameter: 40 mm Overall length: 62 mm Weight: 4.863 kg eClass: 21180902 Features Compatible with ISCAR ONMU 0505 inserts 12-edge configuration for extended tool life 45° geometry for improved surface finish Secure clamping via M5x12 Torx screw FAQ What inserts fit the T801TM face milling head? The T801TM is designed for ONMU 0505 indexable inserts and is compatible with ISCAR insert variants specified for that size. How is the insert secured in this milling head? Inserts are clamped using an M5x12 Torx screw; the recommended key for tightening is a T20 to ensure correct torque and repeatable clamping. Which cutting angle does the cutter use and what is the benefit? The head has a 45° cutting angle, which reduces axial forces, improves chip formation and typically yields a better surface finish compared with steeper geometries. What are the main dimensions to check for machine compatibility? Key dimensions are the 160 mm diameter, 40 mm shank diameter and an overall length of 62 mm; the weight is listed as 4.863 kg. Is the T801TM suited for heavy-facing operations? The cutter’s multiple-edge layout and solid shank make the T801TM appropriate for facing and heavy material removal where rigidity and stable clamping are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a high-capacity face milling solution that combines a large 160 mm diameter, 14 cutting edges and compatibility with PNHX 1105 indexable inserts for efficient, repeatable surface machining; order directly via Metav Werkzeuge or ask our consultants if needed. Face milling cutter head (Planmesserkopf) – 160 mm diameter, PNHX 1105 compatible by Teknik Makina The Face milling cutter head for PNHX 1105 indexable inserts is a precision-engineered tool for heavy-duty face milling, offering stable cutting performance and straightforward insert replacement in industrial machining environments 160 mm diameter for large face milling Compatible with PNHX 1105 indexable inserts 14 cutting edges for high material removal Robust build, total length 63 mm Boosted throughput with a large cutting envelope The large 160 mm diameter and a maximum cutting diameter of 165 mm provide an enlarged cutting envelope that reduces the number of passes required for wide faces, increasing throughput on series parts. With 14 cutting edges, each tool change interval is extended, which lowers non-productive time and supports longer uninterrupted runs. The geometry yields stable engagement and, together with the specified 60° cutting angle, promotes efficient chip formation and predictable cutting forces, making this cutter head suitable for production-focused machining where cycle time matters. Reliable insert interface for repeatable accuracy Designed for use with PNHX 1105 indexable inserts and compatible with inserts from Palbit, the head ensures a reproducible seating and clamping condition, which aids dimensional consistency across batches. The Torx fastening system uses a Torx T15 key and M4x10 screws, enabling secure clamp retention and fast serviceability at the machine. This combination reduces setup deviations and simplifies maintenance procedures, so operators and technicians benefit from predictable, repeatable performance without complex alignment tasks. Robust construction that minimises downtime A compact overall length of 63 mm and solid construction, reflected in the unit mass of 3.715 kg, lend the assembly high stiffness for less chatter and better surface finishes on cast and alloy steels as well as general workshop materials. The sturdy design decreases the risk of accidental damage during handling and supports higher material-removal rates without sacrificing stability. Quick insert rotation and the ample number of cutting edges together reduce total tooling consumption and contribute to lower life-cycle costs for high-volume machining. For production environments seeking dependable face-milling performance from Teknik Makina, contact Metav Werkzeuge for tailored advice and a secure supply channel from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: T681TM Label: 160mm Planmesserkopf PNHX 1105 L63mm Manufacturer: Teknik Makina Facts Diameter: 160 mm Cutting diameter (max): 165 mm Total length: 63 mm Weight: 3.715 kg Cutting edges: 14 Cutting angle: 60° Special features Compatible with PNHX 1105 indexable inserts Suitable for inserts by Palbit Torx key: T15 Torx screw: M4x10 ECLASS: 21181015 Product type: Face milling cutter head SKU identifier: T681TM FAQ What insert type does the cutter head use? The cutter head accepts PNHX 1105 indexable inserts; it is compatible with inserts supplied by Palbit for consistent seating and performance. How many cutting edges are available before indexation? The face mill is equipped with 14 cutting edges, extending time between indexations and reducing downtime for insert changes. Which fastening hardware is required for insert clamping? Insert clamping uses M4x10 Torx screws tightened with a Torx T15 key for secure and repeatable attachment. Is the head suitable for wide-face production machining? Yes — the 160 mm diameter (max 165 mm cutting) and robust construction make it suitable for efficient wide-face operations and high material-removal rates. What are the key dimensions to consider for machine clearance? Key dimensions include the 160 mm diameter, 63 mm total length and the unit weight of 3.715 kg, which should be checked against turret or arbor limitations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust construction, internal coolant and compatibility with SNKX 1206 indexable inserts to increase productivity and tool life; order the Teknik Makina face milling head directly via Metav Werkzeuge or request application advice from our consultants. Face milling head SNKX 1206 — 160 mm with internal coolant by Teknik Makina The face milling head for SNKX 1206 indexable inserts delivers rigid, high-performance face milling for industrial CNC operations with integrated coolant for improved chip control. 160 mm diameter with 12 cutting edges Internal coolant for improved chip evacuation Compatible with SNKX 1206 indexable inserts Robust construction, total length 63 mm and 5.38 kg Faster material removal with lower unit costs The combination of a 160 mm body and 12 cutting edges enables high feed rates while spreading wear across multiple cutting edges, which reduces cost per edge and extends service intervals. The 45° cutting angle lowers cutting forces and improves surface finish in face milling operations, allowing consistent removal rates without excessive spindle load. This balance of geometry and edge count is especially suitable for production runs where throughput and predictable tool life are primary concerns. Improved process reliability and temperature control Built-in internal coolant channels support stable cutting temperatures and efficient chip evacuation, which helps maintain edge integrity and reduces thermal distortion on the workpiece. Secure clamping with M4x12.5 Torx screws and a T15 Torx key ensures fast, repeatable insert changes and consistent seat contact. These features promote higher machine uptime and fewer unscheduled stops, delivering measurable benefits to productivity and shop-floor scheduling. Practical handling and maintenance that save time Insert changeover is straightforward thanks to the standardised fastening system; the Torx interface minimises cam-out and makes torque application reliable. The head’s robust construction and accessible screw positions shorten maintenance cycles and simplify inspection routines. Spare insert stock for the SNKX 1206 family is widely available, which keeps replacement times short and supports uninterrupted production. Suited for demanding industrial environments Engineered for industrial face milling, the head tolerates continuous operation in demanding machine-shop settings and integrates with standard toolholders for straightforward installation. Compatibility with Korloy SNKX 1206 indexable inserts ensures access to a broad range of grades and coatings to match specific materials and machining strategies. The result is a versatile solution that supports stable, repeatable results across a wide range of face-milling tasks. Contact Metav Werkzeuge for a detailed specification review of the Teknik Makina face milling head (SKU T334-1TM) and to discuss suitable inserts, machining parameters and delivery from our Emmerich stock — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T334-1TM Manufacturer: Teknik Makina eClass: 21181015 Label: 160mm face milling head SNKX 1206 L63mm with internal coolant Core data Diameter: 160 mm Max cutting diameter: 173 mm Total length: 63 mm Number of cutting edges: 12 Cutting angle: 45° Weight: 5.38 kg Special features Internal coolant Compatible with SNKX 1206 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M4x12.5 Torx key: T15 Product type: Face milling head FAQ Which indexable inserts fit this head? The face milling head accepts SNKX 1206 indexable inserts; Korloy SNKX 1206 inserts are specified for compatibility with the Teknik Makina head. Is internal coolant integrated? Yes. The Teknik Makina face milling head (SKU T334-1TM) features internal coolant to support chip evacuation and temperature control during heavy face-milling operations. What fastening hardware is required for insert changes? Insert retention uses M4x12.5 Torx screws tightened with a T15 Torx key to ensure reliable clamping and repeatable torque application. What production benefits can be expected from this head? With a 160 mm diameter and 12 cutting edges, the head supports higher material removal rates and lowers cost per cutting edge, improving throughput and predictability in batch production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of large-diameter cutting capacity and compatible indexable insert support: the tool delivers steady stock removal with repeatable geometry and straightforward maintenance. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Face milling head T158TM — Ø160 mm, for SPKN 1203 indexable inserts by Teknik Makina The Face milling head T158TM is a heavy-duty cutter head designed for efficient face milling with SPKN 1203 indexable inserts, suited to production work where stability and repeatable cutting geometry are required Ø160 mm diameter for broad material engagement Compatible with SPKN 1203 indexable inserts 12 cutting edges for consistent material removal 40 mm shank diameter for secure mounting Improved material removal with a wide cutting diameter The large Ø160 mm diameter and the arrangement of 12 cutting edges allow higher material engagement per pass while maintaining a predictable chip flow. For production tooling this means fewer passes to reach the required plane, which raises throughput and reduces total machining time. Compatibility with SPKN 1203 inserts ensures simple procurement of cutting edges and reliable cutting performance across common facing tasks. Stable mounting reduces vibration and improves surface finish A 40 mm shank and compact overall length of 62 mm give the tool a low overhang and greater rigidity at the spindle, turning cutter dynamics into a measurable advantage. The 75° cutting angle contributes to a balanced cutting force vector that lowers chatter and promotes a consistent surface finish. These geometric factors combine to reduce rework and enhance part quality on medium‑ to heavy‑duty milling centres. Practical fastening and service features for fast maintenance Insert retention is secured with M8x24‑L fastening screws and a 5 mm Allen key is specified for adjustment, enabling quick insert changes and straightforward maintenance routines. The standardised fasteners and insert type allow predictable servicing intervals and minimise downtime in a busy production environment, which is essential for keeping cycle times tight on batch work. Mass and dimensions that support industrial workloads With a mass of 5.012 kg the cutter head provides inertial stability that helps dampen transient vibrations during interrupted cuts. The measured dimensions and balanced construction make it a dependable choice where machine-tool rigidity and repeatable positioning correlate directly with part tolerances and surface integrity. Designed for straightforward integration into existing tool setups The head is configured for use with common clamping and spindle interfaces and therefore integrates easily into established tool suites. Its specification focuses on pragmatic compatibility—indexable inserts that are widely stocked and a shank diameter that fits standard toolholders—so adaptations to current setups are minimal. Operational benefits that support production planning Selecting a robust cutter head with repeatable geometry and standardised inserts aids in process stabilisation: shorter set‑up times, fewer insert types to manage and a clear route to predictable cycle outputs. For production planners, that translates into improved capacity forecasting and reduced variance in finished parts. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina face milling head T158TM — call +49 2822 7131930 or eMail info@metav-werkzeuge.com to discuss suitability for specific materials and machining centres Technical Data Article number: T158TM Manufacturer: Teknik Makina Product: Face milling head for SPKN 1203 indexable inserts Diameter: 160 mm Facts Diameter: 160 mm Cutting edges: 12 Shank diameter: 40 mm Effective dimension (e): 66.7 mm Cutting angle: 75° Overall length: 62 mm Weight: 5.012 kg Features Suitable for SPKN 1203 indexable inserts Fastening screw: M8x24‑L Allen key size: 5 mm For face milling operations Brand: Teknik Makina FAQ Which insert type fits this milling head? The milling head accepts SPKN 1203 indexable inserts; the toolbody and insert geometry are matched for reliable seating and repeatable cutting performance. What is the shank diameter and why does it matter? The 40 mm shank provides a secure mounting interface that improves rigidity and reduces vibration compared with smaller‑diameter alternatives. How many cutting edges are available per revolution? The head is equipped with 12 cutting edges, arranged to provide steady material removal and consistent chip formation during face milling. What fastening hardware is required for insert replacement? Insert retention uses M8x24‑L screws tightened with a 5 mm Allen key, enabling quick and standardised maintenance. Is the head suitable for heavy interrupted cuts? The combination of mass (≈5.012 kg), short overhang and 75° cutting angle gives the head the rigidity and force distribution needed for many interrupted cutting scenarios in production. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a wide 160 mm cutting diameter, internal coolant and compatibility with XNMX 0606 inserts for consistent face milling performance; order the head directly via Metav Werkzeuge or consult the specialists for application guidance. Planmesserkopf – Face milling head, 160 mm diameter, internal coolant (Teknik Makina) The Planmesserkopf is a 160 mm face milling head designed for heavy-duty and high-precision face milling with XNMX 0606 indexable inserts, featuring internal coolant and a compact 63 mm overall length for stable contact and efficient chip control. 160 mm cutting diameter for wide coverage Internal coolant for improved tool life Compatible with XNMX 0606 indexable inserts 16 cutting positions for consistent surface finish Increase throughput with a wide, stable cutting platform The 160 mm cutting diameter provides a broad machining envelope that reduces the number of passes required for face milling operations, delivering measurable productivity gains on large surfaces. With a robust cutting-angle geometry of 51°, the cutter head enables efficient chip formation while maintaining a smooth surface finish. The unit’s compact 63 mm overall length helps preserve rigidity at the tool tip, which translates into reduced vibration, extended insert life and a more reliable machining process. These technical characteristics are particularly relevant for milling centres and production shops seeking improved cycle times without compromising accuracy. Coolant-fed design that extends insert lifetime Integrated internal coolant channels supply cutting fluid directly to the cutting edge, improving lubrication and heat dissipation at the contact zone. This reduces thermal load on the carbide inserts and minimises built-up edge formation, which prolongs insert life and reduces unplanned tool changes. For operations where consistent finish and dimensional stability are crucial, the coolant-fed arrangement supports longer uninterrupted runs and reduces the frequency of quality-related rework. The cooling provision also aids in chip evacuation, which helps maintain surface integrity across longer workpieces. Fast set-up and broad insert compatibility for flexible production Engineered for XNMX 0606 indexable inserts and compatible with inserts from Korloy, the head simplifies tooling logistics by matching a widely available insert format used across many workshops. The head accepts Torx screws M4x12.5 with a T15 key, allowing straightforward insert clamping and rapid replacement during scheduled maintenance. The 40 mm mounting bore facilitates integration into a range of toolholders and arbors common in milling setups. Together, these features reduce machine downtime during tool changes and support flexible production planning across mixed batches. Reliable finish and consistent geometry for quality-driven work With 16 cutting positions distributed around the cutter body, the head provides multiple indexable edges before full replacement is required, contributing to stable surface quality over longer production runs. The combination of cutting geometry, coolant feed and secure clamping delivers a consistent machining profile that suits both large-scale facing and finishing passes. For shops prioritising repeatability and surface integrity, this face cutter offers a balance of performance and serviceability that supports a dependable production flow. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina face milling head into production and to request detailed technical guidance or compatibility checks; eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical data SKU: T740TM Manufacturer: Teknik Makina Product type: Planmesserkopf Compatible inserts: XNMX 0606 Compatible insert manufacturer: Korloy Numbers / Core technical data Diameter: 160 mm Overall length: 63 mm Mounting bore (aufnahme_mm_d): 40 mm Cutting angle: 51° Cutting positions: 16 Torx key: T15 Torx screw: M4x12.5 eClass: 21181015 Special features / Versions Internal coolant For XNMX 0606 indexable inserts Suitable for face milling applications Compact design for enhanced rigidity FAQ Which inserts fit this face milling head? The Planmesserkopf is designed for XNMX 0606 indexable inserts and is declared compatible with inserts from Korloy. How does the internal coolant benefit machining performance? Internal coolant directs cutting fluid to the cutting zone, improving lubrication and cooling at the edge, which helps extend insert life and stabilise surface finish when using the Teknik Makina face milling head (SKU T740TM). What is the mounting size for this cutter? The cutter features a 40 mm mounting bore, which suits common arbors and toolholders for secure attachment. How many cutting positions are available before full tool reconditioning? This head offers 16 cutting positions, enabling several indexings to maintain cutting performance and postpone full replacement. Which screws and key are required for insert clamping? Insert clamping uses M4x12.5 Torx screws with a T15 key for secure and rapid insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of a 160 mm diameter and a 45° cutting angle for efficient, high-quality face milling with indexable inserts; the secure 40 mm shank and well-distributed 12 cutting edges reduce downtime and support consistent cycle times. Order via Metav Werkzeuge or consult the Metav team for specification support. Face milling head T628TM — 160 mm diameter, 45° cutting angle (Teknik Makina) Face milling head T628TM designed for high-output face and shoulder milling with indexable inserts SNKX 1206 and ONHX 0505 160 mm diameter for broad surface milling 45° cutting angle for smooth chip flow Compatible with SNKX 1206 and ONHX 0505 inserts 40 mm shank for secure spindle mounting 12 cutting edges for reduced machining time Greater productivity through optimised geometry The milling head is engineered around a 160 mm tool body and a 45° cutting angle, a combination that promotes efficient chip formation and a fine surface finish on each pass. With 12 cutting edges distributed around the circumference, the tool reduces the number of interruptions for indexing and provides longer effective cutting periods per tool change. For workshop planning this translates into measurable time savings on large-area finishing tasks while maintaining repeatable results. Fast insert changes and standardised clamping The device accepts SNKX 1206 and ONHX 0505 indexable inserts, including the ONHX 0505 Palbit alternative, enabling use of industry-standard grades for varied materials and workloads. Insert retention uses M4x10 Torx screws driven with a T15 key, so insert replacement is straightforward and reproducible. This standardised approach lowers maintenance complexity and keeps tooling costs predictable by relying on off-the-shelf inserts and fast, tool-room-friendly procedures. Secure mounting and workshop handling A 40 mm mounting bore ensures a firm interface with the spindle or arbor, supporting stable rotation and reliable concentricity across operations. The head’s mass of 4.577 kg and an overall length of 63 mm contribute to a compact yet substantial assembly that resists vibration during heavy passes. These attributes make the unit well suited to production environments where both stability and fast cycle times are required, and where easy handling in mounting and removal is a practical benefit. Practical advantages for production workflows The modular design and compatibility with common insert types enable rapid adaptation to different cutting conditions without the need for special holders. Using standard inserts helps control inventory and streamlines procurement. The combination of the head’s geometry and insert count supports consistent surface quality while reducing indexing frequency, which helps keep machine uptime high and throughput predictable — a clear rational benefit for job shops and in-house production teams aiming to improve OEE. Contact Metav Werkzeuge for a tailored specification or quotation on the Teknik Cutting Tools face milling head T628TM; assistance from the Emmerich team is available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: T628TM Manufacturer: Teknik Makina Facts Diameter: 160 mm Cutting angle: 45° Cutting edges: 12 Shank / bore: 40 mm Weight: 4.577 kg Overall length: 63 mm Special features Compatible inserts: SNKX 1206, ONHX 0505 Alternative insert: ONHX 0505 Palbit Torx screw: M4x10 Torx key: T15 FAQ Is this head compatible with Palbit inserts? Yes. The T628TM accepts ONHX 0505 Palbit as an alternative, alongside the SNKX 1206 insert type specified for the face milling head. Which retaining screws and key are required for insert changes? Insert clamping on the milling head uses M4x10 Torx screws and a T15 Torx key for secure and repeatable retention. What is the mounting size for the tool? The face milling head features a 40 mm mounting bore for secure spindle or arbor attachment and stable machining performance. How heavy and compact is the head for handling during tool changes? The cutter head weighs 4.577 kg with an overall length of 63 mm, offering a compact footprint while providing the mass needed to reduce vibration in heavy cuts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust 90° cutting angle, a large Ø160 body and a secure 40 mm shank for stable, repeatable machining; order the angle head directly via Metav Werkzeuge or consult the technical team for integration advice. Angle head T527TM – 90° cutting angle, Ø160, for XOMX 1806 indexable inserts (Teknik Makina) The Angle Head T527TM is an indexable-insert holder engineered for precise shoulder cutting and face operations, designed to accept XOMX 1806 indexable inserts and to match SECO insert geometries for straightforward integration into existing tool sets. 90° cutting angle for precise shoulder cuts Ø160 body with 40 mm shank for secure mounting Compatible with XOMX 1806 inserts and SECO Stable 90° geometry for repeatable finishing The 90° cutting angle delivers consistent right‑angle cuts and is particularly suited to shoulder milling and finishing operations where perpendicularity matters. The squared cutting geometry reduces setup complexity and helps maintain machining tolerances, which translates into fewer reworks and improved batch consistency. As a purpose-built angle head, the unit supports stable cutting conditions and predictable tool engagement. Robust mounting and mechanical security A robust Ø160 mm body combined with a 40 mm shank ensures a secure mount in compatible toolholders and reduces vibration during high‑load passes. The assembly weight of 4.831 kg and a compact overall length of 62 mm provide a low centre of gravity that enhances stability. Clamping is effected with M4.5x11 Torx screws and a T15 key, enabling firm, repeatable fixation and easy on‑machine maintenance when inserts are changed. Designed for indexed insert systems and efficiency The head is configured for XOMX 1806 indexable inserts, allowing the use of economical multi‑edge insert formats; the holder accommodates 10 cutting edges, enabling frequent index changes without replacing the tool body. Compatibility with SECO insert geometries expands tooling options and simplifies spare‑part logistics, improving uptime and reducing inventory complexity for production lines. Operational benefits and serviceability Constructed for workshop resilience, the holder minimises downtime through straightforward insert replacement and standardised fastenings. The combination of a large diameter body and standardised shank reduces chatter and extends insert life, while the clear mechanical design supports predictable maintenance intervals and cleaner tool management on the shop floor. For integration planning or to source the Teknik Cutting Tools angle head T527TM with technical assistance and reliable supply from Emmerich, contact Metav Werkzeuge for personalised advice and prompt processing. Technical data Article number: T527TM Manufacturer: Teknik Makina Facts Diameter: 160 mm Shank/fixture diameter: 40 mm Weight: 4.831 kg Overall length: 62 mm Cutting angle: 90° Number of cutting edges: 10 Design & compatibility For XOMX 1806 indexable inserts Compatible with SECO insert formats Fastening: M4.5x11 Torx screw Torx key size: T15 Brand: Teknik Cutting Tools FAQ Is this angle head suitable for shoulder milling at right angles? The T527TM angle head is configured with a 90° cutting angle specifically to produce precise shoulder and perpendicular cuts in machining operations. Which inserts fit this holder? This holder accepts XOMX 1806 indexable inserts and is compatible with SECO insert geometries, allowing use of standard indexed inserts. What fastening hardware is used for insert clamping? Insert clamping and component fixation use M4.5x11 Torx screws; a T15 Torx key is required for secure tightening. How does the Ø160 body affect machining stability? The Ø160 mm body increases stiffness and reduces vibration, which helps improve surface finish and prolong insert life during heavy or interrupted cuts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, purpose-built solution that combines stable geometry and effective coolant delivery for consistent internal machining results. Order the SDUC boring bar directly through Metav Werkzeuge or consult our specialists for application-specific recommendations. SDUC boring bar A10J SDUCR — 93° cutting angle with internal coolant (Teknik Cutting Tools) The SDUC boring bar A10J SDUCR is a right-hand tool designed for internal turning and boring with DC-- indexable inserts, offering a compact profile for precise bore finishing. 93° cutting angle for secure insert seating Internal coolant for improved chip control Compatible with DC-- indexable inserts Shank Ø12 mm for increased rigidity Consistent bore geometry from a 93° cutting angle A 93° cutting angle provides a reliable cutting geometry that stabilises the insert during engagement, reducing chatter and promoting repeatable bore diameters. The guided cutting edge and modest overhang of the tool support improved concentricity, so the machining result is more predictable. This geometry is particularly beneficial where maintaining a constant bore tolerance is critical and where insert seating accuracy directly influences the finished component. Internal coolant for better chip evacuation and tool life Equipped with internal coolant, the tool directs coolant to the cut zone to assist chip evacuation and reduce thermal loading at the cutting edge. By flushing chips away from the insert pocket and cooling the cutting edge, the feature helps maintain cutting performance over longer cycles. For workshop environments where throughput and tool life matter equally, this cooling option contributes to fewer interruptions for cleaning and reduces the risk of built-up edge. Compact dimensions that enhance rigidity and handling With a shank Ø12 mm, a working Ø16 mm diameter and an overall length 125 mm, the tool combines compact design with the mechanical stiffness needed for stable boring. The cutting height 25 mm and modest mass (weight 0.12 kg) keep the assembly light while ensuring the holder provides sufficient clamping stability. Reduced deflection improves dimensional accuracy and minimises the need for corrective passes, supporting efficient cycle times in batch production. Compatibility and straightforward integration into the workshop Designed for indexable inserts of the DC-- family, the bar simplifies insert changes and allows users to choose grades appropriate for the workpiece and cutting conditions. The right-hand cutting direction and standard ISO-style designation enable straightforward integration with common toolholders and machining setups. For operations that require reliable, repeatable internal machining without complex tool preparation, this bar presents a practical option. Contact Metav Werkzeuge today to discuss the Teknik Cutting Tools SDUC boring bar and specify the correct variant for the application; Metav Werkzeuge can advise on insert selection and delivery — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: KA120TM Manufacturer: Teknik Makina Designation: SDUC for DC-- Indexable Inserts ISO designation: A10J SDUCR Dimensions & weight Diameter: 16 mm Shank diameter: 12 mm Cutting height: 25 mm Overall length: 125 mm Weight: 0.12 kg Cutting angle: 93° Features & compatibility Internal coolant: Yes Compatible inserts: DC-- (indexable inserts) Cutting direction: Right-hand Clamping holder designation: 07 SKU: KA120TM FAQ Which inserts fit the SDUC boring bar? The SDUC boring bar is specified for DC-- indexable inserts; consult insert dimensions for exact match and grade selection when using the SDUC boring bar A10J SDUCR from Teknik Cutting Tools (SKU KA120TM). How does the internal coolant improve performance? Internal coolant on this boring bar directs fluid to the cutting edge to assist chip evacuation and reduce cutting temperatures, extending insert life and stabilising the cutting process. What does the 93° cutting angle mean for machining results? A 93° cutting angle offers secure insert seating and improved stability at the tool tip, which helps achieve consistent bore diameters and reduces the risk of vibration during internal turning. Is the tool suitable for long overhangs? The design of the SDUC boring bar, with a shank Ø12 mm and overall length 125 mm, is optimised for short to moderate overhangs; for extended reach applications, consider a larger-diameter holder to maintain rigidity. What is the cutting direction of this boring bar? The tool is configured for right-hand cutting, matching conventional lathe orientation and ensuring predictable chip flow for standard internal machining operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of internal coolant, reliable left-hand orientation and precise compatibility with CC-- 0602 indexable inserts for consistent turning results. Order the component directly via Metav Werkzeuge or consult our advisors for integration into existing tool setups. Teknik Makina KA236TM Boring Bar (A12K SCLCL) — left-hand holder with internal coolant KA236TM is a left-hand boring bar designed for external turning with CC-- 0602 indexable inserts, offering internal coolant delivery for stable cutting performance in production environments. Left-hand cutting direction Internal coolant delivery Compatible with CC-- 0602 inserts ISO A12K SCLCL holder Consistent geometry for predictable turning results The holder is engineered to deliver a repeatable cutting geometry, which reduces setup time and variation between parts. With the A12K SCLCL ISO designation and a defined 95° cutting angle, the configuration supports stable engagement of CC-- 0602 indexable inserts, meaning fewer adjustments at the machine and a steadier surface finish. This predictability benefits batch production where dimensional consistency across runs determines downstream assembly quality. Improved cooling for longer insert life and process reliability Integrated internal coolant channels focus cutting fluid directly at the cutting edge, aiding heat dissipation and chip control. The targeted coolant flow reduces thermal loading on the insert and workpiece, which can extend tool life and lower the frequency of insert changes. For operations that demand high productivity, this feature delivers a measurable increase in uptime and contributes to a more economical machining cycle. Compact design with robust clamping and dimensional clarity The holder’s compact dimensions — 16 mm diameter, 12 mm shaft, and 125 mm overall length — provide a balance between rigidity and access in confined setups. The 25 mm cutting height and lightweight construction (approx. 0.113 kg) make the component suitable for tool turrets and small lathes where space is limited but stiffness remains critical. The clamping geometry is designed to secure CC-- series inserts reliably, reducing the risk of movement under load and improving repeatability. Practical deployment and integration into workshop workflows Thanks to its straightforward interface for CC-- 0602 inserts and clear ISO designation, the boring bar is easy to specify for both retrofit and new-tooling scenarios. The left-hand orientation is particularly suited to operations requiring clockwise feed relative to the holder, while the neutral external profile allows straightforward inspection and replacement during scheduled maintenance. Where cutting strategies are being optimised, the holder’s features contribute to reduced cycle times and more consistent part quality. For technical ordering and application support for Teknik Makina tooling, contact Metav Werkzeuge — our consultants will advise on compatibility and delivery: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: KA236TM Manufacturer: Teknik Makina ISO designation: A12K SCLCL Type: SCLC for CC-- indexable inserts Numbers / core technical data Diameter: 16 mm Shaft diameter: 12 mm Overall length: 125 mm Cutting height: 25 mm Weight: 0.113 kg Cutting angle: 95° Design & special features Cutting direction: left-hand Internal coolant: yes Compatible inserts: CC-- 0602 Suitable for indexable inserts FAQ Which inserts fit this boring bar? The boring bar is compatible with CC-- 0602 indexable inserts and is intended for standard CC-- insert geometries. Does the KA236TM provide internal coolant? Yes, the KA236TM boring bar features internal coolant channels to direct fluid to the cutting edge. What is the intended cutting direction? This holder is manufactured for left-hand cutting applications. What are the key dimensions to check for turret fitment? Key dimensions: 16 mm diameter, 12 mm shaft diameter and 125 mm overall length. What is the ISO designation and how does it help specifying the tool? The ISO designation A12K SCLCL clarifies the holder type and geometry for correct matching with toolholders and inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise right‑hand turning with integrated coolant, compact rigidity and straightforward insert compatibility; this combination reduces setup time and supports stable machining cycles. Order the tool directly via Metav Werkzeuge or request consultant assistance for fitment and coolant routing. A12K SCLCR turning bar (SCLC for CC-- indexable inserts) — internal coolant, 12 mm shank The A12K SCLCR turning bar is a right‑hand external toolholder intended for CC-- 09T3 indexable inserts, designed to provide compact rigidity for workshop and small‑series turning operations. Right‑hand cutting with 95° cutting angle Internal coolant for stable chip evacuation Compatible with CC-- 09T3 indexable inserts 12 mm shank, 125 mm overall length Accurate insert seating and secure geometry for repeatable cuts The ISO‑designated A12K SCLCR toolholder is engineered to ensure correct insert positioning through its 95° cutting angle and 25 mm cutting height, which together support consistent cutting geometry over repeated tool changes. The compact 12 mm shank and 125 mm overall length create a short overhang that helps to maintain rigidity at the toolpost; this reduces vibration and contributes to improved surface finish during external turning. The tool’s construction is focused on delivering measurable, repeatable performance rather than vague promises. Cooler cutting, clearer chips and reduced thermal wear Integrated internal coolant channels direct fluid to the cutting edge, improving chip control and helping to evacuate heat from the cutting zone. Better coolant supply slows thermal degradation of the insert, which in turn extends service intervals and lowers tooling consumption over time. With a nominal mass of 0.113 kg, the bar adds minimal dynamic load to the turret while preserving the stiffness required for precise turning, making it suitable for frequent indexable‑insert swaps and short‑setup production tasks. Simplified procurement and dependable supply chain for workshops For buyers seeking accessible precision, the toolholder matches a pragmatic purchasing approach: standardised ISO designation, straightforward insert compatibility and clear mechanical data ease integration into existing tool inventories. Metav’s European quality filter in Emmerich underpins reliable availability and informed procurement. Technical specifications and practical mounting details are provided so that fitting and coolant integration can be planned with confidence rather than guesswork. Contact Metav Werkzeuge for tailored compatibility advice and to secure the A12K SCLCR turning bar with internal coolant for reliable turning performance Technical data Article number: KA106TM Manufacturer: Teknik Makina ISO designation: A12K SCLCR Product type: SCLC for CC-- indexable inserts Specifications Shank diameter: 12 mm Cutting height: 25 mm Overall length: 125 mm Diameter: 16 mm Weight: 0.113 kg Cutting angle: 95° Cutting direction: right Special features Compatible with CC-- 09T3 indexable inserts Internal coolant Right‑hand external toolholder SCLC design for insert clamping FAQ Which insert type fits this toolholder? The toolholder accepts CC-- 09T3 indexable inserts; the A12K SCLCR turning bar (Teknik Makina, SKU KA106TM) is configured to locate and clamp that insert form securely. Is the coolant fed through the tool shank? Yes, the bar features internal coolant channels that deliver cutting fluid directly to the cutting edge to assist chip evacuation and reduce thermal load. What is the shank size and overall length? The turning bar has a 12 mm shank and a 125 mm overall length, dimensions that support a short overhang for improved rigidity. Can this toolholder be used for heavy interrupted cuts? The compact geometry and 95° cutting angle provide stable seating for inserts; however, suitability for heavy interrupted cuts depends on machine rigidity and chosen insert grade—verify application parameters before use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of robust left‑hand cutting geometry, internal coolant and compatibility with DC-- 0702 indexable inserts delivers reliable chip control and extended insert life; secure supply and expert advice are available via Metav Werkzeuge for seamless integration into production. A12K SDQCL (KA272TM) Boring Bar – Left‑hand, internal‑coolant tool by Teknik Makina The A12K SDQCL boring bar is a left‑hand turning tool designed for use with DC-- 0702 indexable inserts, supplying coolant through the bar for optimised chip evacuation in CNC turning and finishing operations Left‑hand cutting orientation Internal coolant feed for chip control Compatible with DC-- 0702 indexable inserts 12 mm shank, 125 mm overall length Improved throughput for left‑hand turning operations The left‑hand configuration and precise 107.5° cutting angle make this boring bar particularly effective where reverse or mirrored turning paths are required. By combining this geometry with a solid 12 mm shank, the tool maintains cutting stability during interrupted cuts and finishing passes. The result is reduced vibration and a consistent surface finish, which supports higher machine feed rates and fewer reworks. These technical choices translate directly into measurable efficiency gains on production runs that need reliable left‑hand tool performance. Coolant‑fed design for longer insert life and cleaner chips With internal coolant supply, the boring bar channels cutting fluid directly to the cutting zone. This design improves cooling efficiency at the cutting edge and assists chip evacuation when using the DC-- 0702 indexable inserts. The consequence is lower cutting temperatures and diminished flank wear, extending the service intervals for inserts and reducing tooling costs per part. For shops that prioritise cycle stability and predictable consumable usage, the coolant‑fed approach supports continuous, trouble‑free operation on both roughing and finishing cycles. Compact form and secure clamping for repeatable accuracy A short overall length of 125 mm combined with a modest weight of 0.11 kg keeps the overhang minimal, improving rigidity at the toolholder interface. The shank diameter of 12 mm is compatible with clamping blocks designated as 07, allowing secure fixation in standard toolholders and reducing micro‑movement under load. For precision turning tasks where concentricity and repeatability are essential, this configuration helps achieve tighter tolerances and consistent part geometry across batches. Application guidance and compatibility This boring bar is specified for indexable inserts of the DC-- 0702 format and is optimised for left‑hand cutting directions. The tool’s 16 mm diameter profile and 25 mm cutting height suit a range of light to medium turning operations typical in engineering, maintenance and small‑batch production. Its balance of compact dimensions and coolant capability makes it a practical choice for workshops seeking an adaptable, low‑mass tool that still delivers the thermal control necessary for longer insert life. Contact Metav Werkzeuge for tailored technical advice and to arrange supply of the Teknik Makina A12K SDQCL boring bar (KA272TM) with internal coolant and DC-- 0702 insert compatibility Technical data Article number: KA272TM Manufacturer: Teknik Cutting Tools / Teknik Makina ISO designation: A12K SDQCL Key dimensions Shank diameter: 12 mm Diameter: 16 mm Cutting height: 25 mm Overall length: 125 mm Cutting angle: 107.5° Weight: 0.11 kg Special features Internal coolant feed Left‑hand cutting orientation For DC-- 0702 indexable inserts Clamping designation: 07 FAQ What insert type is required for this boring bar? The boring bar is designed for DC-- 0702 indexable inserts; use inserts matching that format for correct seating and performance with the A12K SDQCL tool. Can the tool be used for finishing and roughing cycles? Yes. The combination of internal coolant and the bar’s geometry makes the A12K SDQCL suitable for both finishing and light to medium roughing where DC-- 0702 inserts are appropriate. Does the bar require a special toolholder? Standard holders compatible with a 12 mm shank and clamping designation 07 are suitable; secure clamping is recommended to maintain repeatable accuracy. Is this a left‑hand or right‑hand tool? This model is configured for left‑hand cutting, intended for operations where reverse turning direction is required. How does internal coolant benefit machining with this bar? Internal coolant directs fluid to the cutting edge, improving chip evacuation and reducing cutting temperatures, which extends insert life and supports consistent surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, rigid toolholder that combines internal coolant supply and precise indexable-insert compatibility to raise machining stability and shorten tool-change time. Order the A12K SDQCR directly via Metav Werkzeuge or consult the technical advisers for application support. A12K SDQCR – SDQC right‑hand indexable‑insert holder with internal coolant (Teknik Makina) The A12K SDQCR is a right‑hand indexable‑insert holder designed for external turning and light boring applications, providing through‑coolant capability and compact 12 mm shank dimensions for space‑restricted toolposts. Internal coolant channel for reliable chip evacuation Suitable for DC-- 0702 indexable inserts 12 mm shank for compact toolholders Right‑hand orientation with 107.5° cutting angle Improved process stability through internal coolant and rigid shank The holder’s internal coolant route delivers cutting fluid directly to the cutting edge, aiding chip control and reducing thermal load at the insert. Combined with a 12 mm shank and a short 125 mm overall length, the component reduces overhang and vibration, which in turn supports consistent surface finish and longer insert life. For workshops that run series production on small lathes or multi‑turning centres, this arrangement lowers scrap rates and enhances machine uptime by stabilising the cutting process. Broad compatibility with DC-- series inserts for faster tool changes Designed specifically for the DC-- 0702 insert family, the toolholder accepts standard indexable plates and uses a proven clamping geometry to secure the insert reliably. The 107.5° cutting angle and right‑hand orientation suit conventional external turning feeds; the indexable system allows quick rotation of the insert to a fresh edge without reclamping the holder, improving labour efficiency and reducing spindle idle time. This compatibility simplifies inventory: one holder supports a commonly stocked insert format, easing workshop logistics. Practical benefits for workshop organisation and choice Weighing just 0.11 kg and featuring a nominal 16 mm diameter at the cutting zone, the holder is easy to store and handle while remaining compatible with compact toolposts. The ISO designation A12K SDQCR indicates the shank geometry and clamping style, which assists buyers in matching holders to existing toolblocks. Where process parameters are critical, Metav’s application guidance can help select the correct insert grade and cutting data for different materials, ensuring the holder is deployed to best effect. Contact Metav Werkzeuge to discuss application suitability for the A12K SDQCR (KA142TM), to request detailed drawings or to obtain cutting‑data recommendations — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KA142TM Manufacturer: Teknik Makina ISO designation: A12K SDQCR For indexable inserts: DC-- 0702 Facts Shank diameter: 12 mm Cutting height: 25 mm Diameter: 16 mm Overall length: 125 mm Weight: 0.11 kg Cutting angle: 107.5° Special features Internal coolant: yes Cutting direction: right‑hand Clamping holder designation: 07 Suitable for indexable insert system DC-- 0702 FAQ Is this holder compatible with DC-- 0702 inserts? Yes. The A12K SDQCR toolholder is manufactured for use with DC-- 0702 indexable inserts and secures the plates with standard clamping geometry. Does the holder provide through‑coolant delivery? Yes. Internal coolant channels are integrated, supplying fluid directly to the cutting edge to aid chip control and cooling. What shank and overall dimensions should be expected? The holder has a 12 mm shank, a 16 mm cutting‑zone diameter and a 125 mm overall length (KA142TM), suitable for compact toolposts. Is the toolholder suitable for left‑hand turning? No. The A12K SDQCR is a right‑hand orientation holder; left‑hand operations require a left‑hand counterpart. Which manufacturer produces this item and who is the responsible distributor? Teknik Cutting Tools is the manufacturer of this holder; sales and distribution are managed via Metav Werkzeuge for the European market. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

For reliable internal machining, the combination of a 16 mm diameter, the S12Q shank and precise left‑hand cutting at a 95° cutting angle ensures stable entry and consistent bore quality; order directly via Metav Werkzeuge or consult our specialists for application guidance. Boring bar S12Q — 16 mm, left‑hand cutting — Teknik Makina The Boring bar S12Q is a compact tool holder for CC-- 0602 indexable inserts, built for precise internal machining and controlled chip flow in confined bores S12Q shank for secure tool holding 16 mm diameter for narrow bores 95° cutting angle for precise entry Compatible with CC-- 0602 indexable inserts Stable clamping for consistent bore quality The S12Q designation denotes a standardised shank geometry that provides secure clamping and repeatable concentricity, which translates into stable bore finishes and reduced vibration. With a 16 mm body and a shaft 12 mm profile, the construction minimises deflection during internal passes; the result is consistent diameter control even on extended reaches. This mechanical stability supports higher process reliability and fewer rework cycles in precision drilling and light boring tasks. Designed for productive internal machining Optimised for indexable tooling, the bar accepts CC-- 0602 inserts and delivers a controlled cutting action thanks to the 95° cutting angle and left‑hand cutting orientation. The combination of insert geometry and toolholder alignment ensures predictable chip formation and efficient material removal in serial production. A nominal overall length of 180 mm provides a practical balance between reach and rigidity for typical workshop bores, improving cycle times without compromising surface quality. Fast tool changes and low maintenance Tool changes are simplified by the accessible Torx fixing system. The insert is retained with a T8 Torx key and an M2.5x5.5 screw, enabling quick replacement and repeatable clamp force. At a net weight of 0.145 kg the assembly is lightweight for hand‑ling and rapid tool magazine cycles, while the 25 mm cutting height secures the insert pocket to resist edge movement under load. These service features reduce downtime and keep production lines moving. Practical applications and workshop integration This tool is particularly suited to confined‑space machining where narrow diameter boring and controlled chip evacuation are required, for example in hydraulic components, small housings and precision fixtures. The robust feature set supports use in both single‑piece flow and short to medium production runs. Where specification checks are necessary, the clear ISO designation (S12Q) and SKU (K235TM) enable unambiguous ordering and inventory control for procurement and toolroom management. For reliable left‑hand boring with CC-- 0602 inserts, contact Metav Werkzeuge for the Teknik Makina S12Q boring bar (SKU K235TM) available from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: K235TM Manufacturer: Teknik Makina Product type: Boring bar Label: 16mm Bohrstange CC-- 0602 L180mm Eclass: 21180806 Core specifications Diameter: 16 mm Overall length: 180 mm Weight: 0.145 kg Shaft diameter: 12 mm Cutting height: 25 mm Clamp/head width: 9 mm Special features ISO designation: S12Q Compatible inserts: CC-- 0602 Cutting direction: left‑hand Cutting angle: 95° Torx key: T8 Torx screw: M2.5x5.5 SKU: K235TM FAQ Which inserts fit this tool? The K235TM boring bar is designed for CC-- 0602 indexable inserts and is optimised for their geometry and chipbreaker types. Is the cutting direction left‑hand or right‑hand? This bar features left‑hand cutting; the orientation is specified as left in the product data. What are the key dimensions to check for toolholder compatibility? Check the 16 mm body diameter and shaft 12 mm to ensure the toolholder accepts the S12Q shank and provides adequate clamping. How is the insert secured and what tool is required? Inserts are fastened with an M2.5x5.5 screw using a T8 Torx key, enabling rapid and repeatable insert changes. What is the SKU for ordering and stock identification? The product is listed under SKU K235TM for inventory and procurement purposes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise internal turning with a robust indexable-insert boring tool offering a 16 mm shank and 52 mm cutting length for stable machining; order directly via Metav Werkzeuge or consult our specialists for application advice. Boring tool TKB088TM — 16 mm shank, compatible with WCMX 0302 inserts (Teknik Makina) the boring tool TKB088TM provides a compact, rigid solution for internal turning tasks in production and workshop environments 16 mm shank diameter 52 mm cutting length Compatible with WCMX 0302 inserts 100 mm overall length Rigidity and repeatability for internal machining The design focuses on stability and predictable performance. A 16 mm shank diameter reduces deflection during cuts, while the 52 mm cutting length keeps the centre of cutting forces close to the holder, which improves dimensional repeatability. Where indexable inserts are used, a secure seat and simple clamp mechanism mean fast insert changes and consistent tool geometry; this reduces downtime and contributes to a steady production rhythm. The relatively lightweight construction at 0.176 kg also simplifies handling during tool changes without compromising stiffness. Clear compatibility and practical handling This boring bar is specified for use with WCMX 0302 indexable inserts, which are widely available and easy to fit. The compatibility with standard insert formats enables cost-effective reconditioning of the cutting edge and straightforward inventory management. The tool’s 100 mm overall length and measured dimensions suit many internal turning setups on lathes and CNC turning centres; the maximum cutting diameter of 20 mm defines the working envelope and helps with machine setup and cycle planning. Technical users will appreciate the concise, measurable values that support reliable process planning. How the tool supports workshop productivity By combining a compact form with standard insert compatibility, this boring bar helps maintain cycle times and tool life across batch runs. The indexable-insert system lowers total machining cost by separating the cutting edge from the tool body, while the defined shank and cutting lengths ease repeatable clamping and calibration in toolholders. For procurement and production departments, the tool offers straightforward specification: clear numerical data enables quick comparison and integration into existing tool assortments, supporting efficient workshop logistics and consistent results on steel and similar turning applications. For application-specific advice or to secure supply from our Emmerich location, contact Metav Werkzeuge for expert guidance on using the 16 mm shank boring tool TKB088TM Technical data Article number: TKB088TM Manufacturer: Teknik Makina Designation: Ausbohrwerkzeug (boring tool) Facts Shank diameter: 16 mm Cutting length: 52 mm Maximum cutting diameter: 20 mm Overall length: 100 mm Weight: 0.176 kg Special features Compatible inserts: WCMX 0302 Indexable-insert concept Compact, rigid construction FAQ What insert types fit this boring bar? The boring tool TKB088TM is specified for WCMX 0302 indexable inserts, ensuring compatibility with widely available insert stocks. What is the effective cutting length of the tool? The tool provides a 52 mm cutting length, which determines the depth of internal machining and helps when planning tool reach and clearances. Which shank diameter is required for the toolholder? A 16 mm shank diameter is required; the shank size delivers the rigidity necessary for stable internal turning. What is the maximum bore diameter this tool can machine? The stated maximum cutting diameter is 20 mm, defining the recommended working range for internal turning operations. Is the tool suitable for automated insert changes? The indexable-insert design of the TKB088TM supports rapid insert replacement and repeatable clamping, which is compatible with standard workshop procedures for efficient changeover. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, purpose-built boring solution that pairs precision compatibility with robust clamping for uninterrupted production. With a 16 mm shank and a 170 mm overall length, the tool reduces set-up complexity and ensures predictable insert performance — order or request advice directly via Metav Werkzeuge for tailored recommendations. S16P boring bar for SCMT 09T3 indexable inserts – 16 mm, L170 by Teknik Makina The S16P boring bar is a right-hand, ISO-design tool holder engineered for SCMT 09T3 indexable inserts, suitable for standard turning and finishing operations in workshop and light industrial CNC environments 16 mm shank diameter 170 mm overall length Compatible with SCMT 09T3 inserts Right-hand cutting, 3° cutting angle Consistent insert performance through matched geometry The S16P design focuses on repeatable cutting conditions by matching the geometry of SCMT 09T3 inserts to a compact 16 mm shank. This combination reduces vibration and improves surface finish compared with mismatched holders, delivering a measurable improvement in process stability. For operations where tool change frequency and reproducibility matter, the smaller shank and standardised mounting reduce set-up time and simplify inventory management while maintaining the benefits of indexable-carbide cutting solutions. Secure clamping and quick insert changes to limit downtime Fast, reliable clamping is achieved with a Torx-driven screw system that ensures stable insert retention during heavy engagement. The Torx T15 interface and M3.5x8.5 screw specification provide a defined torque path for repeatable tightening, lowering the risk of insert movement and breakage. A 13 mm cutter-head width and a 20 mm cutting height support common SCMT insert profiles, allowing straightforward replacement without special adapters — a design choice that translates into fewer interruptions on the machine shop floor. Compact length and controlled cutting angle for efficient turning With a total length of 170 mm and a balanced mass of 0.28 kg, this boring bar is optimised for confined setups and multi-tasking machining centres. The right-hand cutting direction and a modest 3° cutting angle produce predictable chip flow and reduced radial forces, which helps to protect spindle bearings and extend insert life. Supplied by Teknik Makina, the holder is suitable for serial production where repeatability and ease of maintenance are priorities, enabling operators to concentrate on cycle time and part quality rather than frequent tool adjustments. Choose the Teknik Makina S16P boring bar for reliable indexable-insert turning and contact Metav Werkzeuge for expert ordering support and prompt delivery from Emmerich. Technical data SKU: K200TM Model designation: S16P Type: Boring bar Brand: Teknik Makina Label: 16mm Bohrstange SCMT 09T3 L170mm Facts Shank diameter: 16 mm Overall length: 170 mm Cutting height: 20 mm Cutter-head width: 13 mm Weight: 0.28 kg Cutting angle: 3° Cutting direction: right Special features Compatible inserts: SCMT 09T3 Torx key: T15 Torx screw: M3.5x8.5 ISO designation: S16P FAQ Which insert type fits this tool holder? The S16P boring bar accepts SCMT 09T3 indexable inserts; the holder geometry is aligned to standard SCMT seating. What is the shank diameter and overall length? Shank diameter is 16 mm and the overall length is 170 mm, ideal for compact assemblies. How is the insert secured in the cutter head? Insert clamping uses a Torx T15 screw with specification M3.5x8.5 to provide consistent torque and secure retention. Is this holder suitable for finishing passes? The modest 3° cutting angle and stable head width make it well suited to finishing and semi-finishing tasks with SCMT inserts. What is the product SKU for ordering and spare parts reference? The product is listed as SKU K200TM for order and inventory purposes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise internal machining with an indexable boring solution that combines a 16 mm shank and a maximum cutting diameter of 20 mm for reliable, repeatable results; order directly via Metav Werkzeuge or consult the team for application advice. Boring Bar TKB092TM — Indexable internal boring bar, 16 mm shank, Ø up to 20 mm (Teknik Makina) The Boring Bar TKB092TM is an indexable internal cutting tool designed for precision bore enlarging and finishing in CNC turning and lathe operations *Indexable for WCMX 0302 inserts *16 mm shank diameter *Cutting diameter up to 20 mm *152 mm effective cutting length Accurate internal finishing with indexable inserts The TKB092TM delivers controlled internal cutting by using widely available WCMX 0302 indexable inserts, which simplify tool setup and spare-part logistics. The combination of an exchangeable insert system and a solid tool body reduces downtime: when an insert is worn, replacement is fast and repeatability is restored immediately. This approach lowers overall machining cost per bore while maintaining consistent surface quality and diameter tolerance in series production. Rigidity and chip control for stable performance A 16 mm shank and a 152 mm cutting length provide a balance between accessibility and rigidity to reduce vibration during machining. The tool geometry supports predictable chip evacuation when used with the recommended insert type, which improves tool life and keeps cycle times steady. Specifying suitable clamping and minimising overhang enhances stability, leading to fewer reworks and more reliable batch throughput for production workshops. Simple integration into existing turning workflows Compatibility with WCMX 0302 inserts makes the tool straightforward to integrate into standard toolholders and changeover procedures. The bar’s overall length of 200 mm keeps reach adequate for common internal operations while remaining compatible with typical turret clearances. Choosing this indexable solution reduces inventory complexity compared with full solid-tool options and streamlines maintenance routines for shop-floor teams. Practical applications and productivity gains Optimised for internal boring and light finishing passes, the bar is suited to applications in general engineering, automotive subassemblies and any production requiring precise internal diameters up to 20 mm. The indexable system enables rapid adaptation between roughing and finishing by altering insert grades or geometries, delivering measurable cycle-time savings and consistent part quality across runs. Contact Metav Werkzeuge for tailored advice on deploying the Teknik Cutting Tools boring bar TKB092TM and to confirm stock availability from the Emmerich warehouse Technical Data Article number: TKB092TM Manufacturer: Teknik Makina Facts Cutting diameter max: 20 mm Shank diameter: 16 mm Cutting length (shaft cutting length): 152 mm Overall length: 200 mm Weight: 0.362 kg Special features Indexable boring bar design Compatible with WCMX 0302 inserts Intended for CNC turning/lathe internal operations FAQ What maximum bore diameter can be machined with this bar? The TKB092TM machines up to a 20 mm cutting diameter when fitted with the correct insert geometry and held with adequate rigidity. Which insert type is specified for the tool? Compatibility is provided for WCMX 0302 indexable inserts; the TKB092TM is designed to use this standard for easy replacement and a wide choice of grades. What shank diameter and reach does the bar offer? The boring bar has a 16 mm shank and a total length of 200 mm with a 152 mm effective cutting length, balancing reach and stiffness for internal operations. Is the tool suitable for finishing passes? Yes, the indexable configuration and available insert grades allow the TKB092TM to perform light finishing passes with consistent surface results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, versatile chamfering tool that combines precise angle control and indexable-insert efficiency for consistent edge preparation; the 16 mm shank and 35 mm cutting height deliver reliable stability and capacity for deeper chamfers. Order directly via Metav Werkzeuge or consult our specialists for application advice. Fasenfräser S334TM — Chamfer cutter with 16 mm shank and dual-angle capability Fasenfräser S334TM is a compact chamfer cutter designed for precise edge preparation and flexible chamfer angles in CNC and workshop settings. 16 mm shank for secure clamping Compatible with TCMT 1102 inserts Dual-angle 45° and 90° capability 35 mm cutting height for deeper chamfers Consistent chamfering performance for production use The chamfer cutter is engineered to provide reliable edge preparation with a sturdy 16 mm shank that ensures stable fixation in the tool holder and reduces runout. With a 35 mm cutting height and a single cutting edge, the tool maintains a compact footprint while allowing deeper chamfers where required. Compatibility with TCMT 1102 indexable inserts reduces downtime: worn inserts are replaced in seconds, restoring cutting performance without regrinding, which keeps cycle times predictable and maintenance straightforward. Flexible angle options to simplify setup and part handling Two defined chamfer geometries—45° and 90°—are available on the same tool body, enabling quick switching between common edge preparations without a different cutter per angle. This flexibility shortens set-up routines and minimises tool inventory. The dual-angle design supports standard deburring and assembly-facing preparations, delivering repeatable results across batches and reducing the need for secondary operations. Fast insert changes and low toolmass for reduced spindle load Insert retention uses a Torx M2.5x5.5 screw operated with a T8 key, allowing fast, secure replacement of the TCMT inserts. This straightforward clamping reduces changeover time and the risk of incorrect seating. The tool’s lightweight 0.14 kg construction minimises additional mass on the spindle, helping to maintain machine dynamics and improving acceleration between cuts; the result is efficient machining with predictable forces and stable finishing. Built for integration in standard tool systems With a nominal diameter 16 mm and total length 100 mm, this chamfer cutter integrates easily into conventional tool holders and modular setups. The cutter’s single cutting edge and insert format are widely available, simplifying spare-part stocking. Compatibility with a common TCMT insert type ensures access to varied grades and coatings for specific workpiece demands without changing tool geometry. Contact Metav Werkzeuge for tailored application guidance and to discuss the Teknik Cutting Tools chamfer cutter S334TM; our Emmerich team can advise on insert grades, clamping options and delivery logistics. Technical data Article number: S334TM Manufacturer: Teknik Makina Eclass: 21180806 ETIM: EC011860 Designation: Chamfer cutter (Fasenfräser) Facts Shank diameter: 16 mm Diameter: 16 mm Cutting height: 35 mm Total length: 100 mm Cutting edges: 1 Angles: 45° / 90° Weight: 0.14 kg Special features Compatible with TCMT 1102 indexable inserts Torx screw: M2.5x5.5 Torx key: T8 Single-cutting-edge design FAQ What insert type fits this chamfer cutter? The chamfer cutter S334TM is specified for TCMT 1102 indexable inserts, allowing rapid replacement and broad choice of insert grades. Can the tool produce both 45° and 90° chamfers without replacement? Yes. The cutter is designed with defined geometries for 45° and 90° chamfering, enabling flexible edge preparation within one tool. What is the shank size and why does it matter? Shank diameter is 16 mm, which ensures secure clamping in standard collets and holders and contributes to consistent concentricity during chamfering. How long is the active cutting length? The tool provides a 35 mm cutting height, suitable for deeper chamfers and yielding greater material engagement where required. Is the screw type for insert clamping easy to service on the shop floor? Yes. Insert clamping uses a Torx M2.5x5.5 screw operated with a T8 key, enabling quick and reliable insert changes during routine maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the robust combination of precise geometry and secure clamping to reduce rework and keep cycle times reliable; the 45° chamfer and generous cutting height deliver consistent results in serial production. Order via Metav Werkzeuge or consult the team for fitment questions and rapid dispatch. S770TM Chamfer Cutter — 45° chamfering tool for SOMT 11T3 indexable inserts (Teknik Makina) The S770TM chamfer cutter is a compact tool designed to produce repeatable 45° chamfers with SOMT 11T3 indexable inserts, suited to workshop and light production use where consistent edge preparation and short set-up times are required. 45° chamfer angle for consistent bevelling 20 mm precision shank for stable clamping 50 mm cutting height for deeper chamfers Compatible with SOMT 11T3 indexable inserts Consistent 45° chamfers that cut set-up time and rework The S770TM is built around a defined 45° chamfer geometry that produces uniform bevels across batches. That predictable geometry reduces the need for manual finishing and inspection, which in turn lowers scrap rates and shortens rework cycles. The tool is optimised for a single cutting edge configuration, offering a simple cutting action that is easy to understand and reproduce on manual and CNC equipment. The clear geometry also makes it straightforward to programme for automated machining or to verify with a process-controlled workflow. Stable mounting and extended cutting reach for higher throughput A 20 mm shank provides high rigidity in the holder, reducing chatter and improving surface quality; this stability is particularly important when taking deeper chamfers. With a 50 mm cutting height and an overall length of 110 mm, the cutter offers an extended reach that accommodates larger workpieces and set-ups where clearance is limited. The tool’s modest mass (approx. 0.26 kg) helps maintain balance at typical spindle speeds while keeping handling comfortable during tool changes. Together, these mechanical attributes support faster feeds and consistent cycle times without sacrificing finish quality. Indexable insert system for fast maintenance and predictable economics This cutter is designed for SOMT 11T3 indexable inserts, a standard format that allows rapid replacement of the cutting edge without regrinding the body. Compatibility with Palbit inserts means a wide choice of grades and chipbreaker geometries for different operational requirements. The insert is secured with an M4x11 Torx screw, tightened with a T8 key, which simplifies exchange and repeatable clamping torque. Using indexable inserts reduces tooling cost per edge and shortens downtime compared with solid tools, delivering a clear cost-benefit in serial production environments. Practical fit for workshops and production-focused toolrooms Designed for machine shops, maintenance departments and small production lines, this chamfering tool balances accessibility with industrial capability. The S770TM’s format makes it easy to integrate into existing tool inventories and to standardise chamfering across several machines. Combined with rapid dispatch and the broad catalogue available from Metav Werkzeuge, the cutter is a pragmatic choice for purchasers who prioritise reliable supply and a wide spare-part network. Clear technical specifications also make process qualification straightforward and support traceable, repeatable machining outcomes. For reliable 45° chamfering choose the Teknik Cutting Tools S770TM — contact Metav Werkzeuge in Emmerich for tailored advice and fast dispatch: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: S770TM Manufacturer: Teknik Makina Core Dimensions Diameter: 16 mm Shank diameter: 20 mm Cutting height: 50 mm Overall length: 110 mm Cutting edges: 1 Weight: 0.26 kg Chamfer angle: 45° Design & Features For SOMT 11T3 indexable inserts Compatible insert manufacturer: Palbit Torx screw: M4x11 Torx key size: T8 SKU: S770TM FAQ Which insert type fits this chamfer cutter? The S770TM accepts SOMT 11T3 indexable inserts; compatibility with Palbit grades broadens the choice of cutting materials and chip control solutions. How is the insert secured in the cutter? The insert in the S770TM is clamped with an M4x11 Torx screw, which is tightened using a T8 key to achieve repeatable clamping. What are the key dimensions to consider for toolholder selection? Key values for the S770TM are a 20 mm shank diameter, 16 mm cutter diameter, and 110 mm overall length — match those to the machine holder and available clearance. Is this tool suitable for deep chamfers? With a 50 mm cutting height, the S770TM accommodates deeper chamfering tasks while maintaining stable clamping for consistent results. What is the SKU and who manufactures this cutter? The tool is listed as S770TM and is produced by Teknik Makina (Teknik Cutting Tools), marketed via Metav Werkzeuge for European supply. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, 16 × 16 mm clamping profile combined with 16 ER indexable insert compatibility and a 100 mm overall length for consistently accurate external threading; order the clamping holder directly via Metav Werkzeuge or consult our specialists for application advice. Clamping holder AL 1616 — for outside threading, 16 mm profile — Teknik Makina The clamping holder AL 1616 is a compact toolholder engineered for secure external threading on lathes and turning centres, optimised for standard 16 ER indexable inserts and right-hand cutting. Compact 16 × 16 mm clamping profile Compatible with 16 ER indexable inserts 100 mm overall length for stable set-up Right-hand cutting for external threads Precise alignment for consistent thread quality The holder’s 16 mm clamping profile and AL 1616 ISO designation provide a defined seating that reduces radial run-out and ensures repeatable part tolerances. By accepting 16 ER indexable inserts the system permits fast insert changes without resetting the tool position, which shortens set-up time and keeps cycle times predictable. The stated 22 mm cutting height aligns the insert edge with common lathe centres; this feature aids in achieving consistent thread profiles even when operators have differing levels of experience. Stiffness and vibration control that extend insert life A rigid toolholder contributes directly to tool life. The 100 mm overall length balances accessibility with stiffness to limit deflection during thread turning, while the modest mass (approx. 0.25 kg) minimises unwanted dynamic loading. These attributes reduce chatter and promote a finer surface finish on external threads, so the insert life of the 16 ER tooling is optimised and downtimes for tool changes are reduced. Right-hand cutting geometry is provided for external thread turning on conventional and CNC lathes. Straightforward integration with common tool systems Designed to mate with H16-ER16-style holding systems, the toolholder simplifies installation into existing boring-bar or toolpost arrangements. The H16-ER16 designation refers to the compatible bar / shank interface, facilitating rapid retrofit into standard setups without special adaptors. As an ISO-compatible clamping solution, this holder supports rapid changeovers and predictable positioning, making it suitable for small-batch production and larger manufacturing runs alike. For detailed machine compatibility or to confirm insert seat heights, Metav Werkzeuge’s technical team can provide specification guidance and drawings. For order placement, specification confirmation, or to discuss integrating the Teknik Makina clamping holder AL 1616 into a production line, please contact Metav Werkzeuge in Emmerich via e‑mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 — reliable supply from stock is available. Technical data Article number: D259TM Brand: Teknik Makina ISO designation: AL 1616 ECLASS: 21181004 Facts Height: 16 mm Head width: 16 mm Width: 16 mm Cutting height: 22 mm Overall length: 100 mm Weight: 0.25 kg Special features Compatible inserts: 16 ER Shank / bar designation: H16-ER16 Cutting direction: right-hand Application: for outside thread (external threading) FAQ Which insert format fits this holder? The clamping holder AL 1616 accepts 16 ER indexable inserts; this format provides quick change capability and stable clamping for external threading tasks. Is the cutting direction specified for the holder? Yes, the holder is configured for right-hand cutting suitable for external threading operations on standard lathes and turning centres; this is recorded for the Teknik Makina holder (SKU D259TM). What does the ISO designation AL 1616 indicate? The AL 1616 designation describes the toolholder’s 16 × 16 mm clamping profile, ensuring compatibility with standard toolposts and fixtures and predictable insert line-up. Can this holder be used in CNC turning centres? The holder’s robust geometry and H16-ER16 shank compatibility make it suitable for both manual lathes and CNC turning centres, provided the machine accepts the stated shank interface. How does overall length affect performance? The 100 mm overall length is a compromise between accessibility and stiffness; it offers stable machining for external threads while allowing reach into typical component geometries. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust clamping and precise geometry — a compact 16 x 16 mm shank and compatibility with TCMT 16T3 indexable inserts ensure stable turning and quick insert changes. Order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Klemmhalter TCMT 16T3 – 16 x 16 mm indexable insert holder by Teknik Makina A Klemmhalter for TCMT 16T3 indexable inserts, built for right-hand turning with a compact 16 x 16 mm square shank for reliable mounting in standard toolposts. Square 16 x 16 mm shank Accepts TCMT 16T3 indexable inserts Right-hand holder with 91° cutting angle Consistent clamping for reliable production Stable clamping is central to predictable machining results. The 16 x 16 mm square shank and ISO 1616 designation deliver a compact footprint with secure seating in the toolholder, reducing micro‑movement and preserving tool life. Because the insert pocket is dimensioned for TCMT 16T3 inserts, insert seating is repeatable and regrinding cycles are simplified. Reduced vibration translates into improved surface finish and consistent cycle times, which benefits production planning and cost efficiency. Geometry that supports accurate toolpaths A defined cutting geometry makes process planning straightforward: the 91° cutting angle and 22.5 mm cutting height position the insert for typical turning profiles while maintaining chip control. The holder’s right-hand orientation is matched to standard turning directions, ensuring predictable radial engagement. The clamping screw specification (M3.5x8.5) and T15 Torx key compatibility enable fast insert changes and secure fixation, which minimises downtime during tool changes and maintenance. Compact design for easy integration and workshop resilience With a low mass of 0.194 kg, the holder offers a good stiffness‑to‑weight ratio that suits both benchtop lathes and larger CNC turning centres without adding unnecessary overhang. The 1616 ISO marking and concise dimensions aid repeatable set-up and tool-data entry in CAM systems. Manufactured by Teknik Makina to meet industrial tolerances, this toolholder supports a broad range of general turning tasks and is straightforward to store and handle in busy workshops. Metav’s distribution ensures dependable delivery and an established quality filter for European operations. Contact Metav Werkzeuge for tailored advice on Teknik Makina toolholders and to secure the D473TM for reliable turning performance Technical data SKU: D473TM ECLASS: 21181004 Product type: Klemmhalter Manufacturer: Teknik Makina Facts Shank width: 16 mm Shank height: 16 mm Cutting head width: 16 mm Cutting height: 22.5 mm Cutting angle: 91° Weight: 0.194 kg Torx screw: M3.5x8.5 Torx key: T15 Direction: right Special features For TCMT 16T3 indexable inserts ISO designation: 1616 SKU: D473TM Right-hand orientation FAQ What inserts fit this holder? The holder accepts TCMT 16T3 indexable inserts; the pocket and clamping geometry are matched to that insert format. Is the holder suitable for automated tool changers? Yes, the compact 16 x 16 mm shank and standard ISO designation facilitate integration into automated tool systems where a matching toolpost or turret seating is used. Which screw and key are required for insert clamping? Insert clamping uses an M3.5x8.5 Torx screw tightened with a T15 Torx key for secure fixation. Can the holder be used for heavy roughing cuts? The holder is designed for general turning operations; for heavy roughing, assess the machine stiffness and insert grade. The D473TM’s robust clamping helps reduce movement, supporting moderate roughing when correctly specified. What is the product code for ordering? Order using SKU D473TM, which identifies this Teknik Makina clamping holder for TCMT 16T3 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, robust toolholder that combines secure clamping with fast indexable-insert replacement; the compatibility with Taegutec 4NKT06 inserts and the 16 mm shank ensure reliable repeatability and short tool-change times. Order directly via Metav Werkzeuge or contact the specialists for consultation. Shank milling cutter for 4NKT 0603 indexable inserts — 16 mm shank, 2 cutting edges (Teknik Makina) A shank milling cutter designed for use with 4NKT 0603 indexable inserts, offering precise insert clamping and a compact overall length for efficient machining in small to medium CNC setups Compatible with Taegutec 4NKT06 inserts 16 mm shank diameter for secure clamping 2 cutting edges for efficient material removal 120 mm overall length with 25 mm cutting length Precision and fast reconditioning for indexable-insert workflows This shank milling cutter is engineered for efficient indexable-insert machining: by using indexable inserts such as the Taegutec 4NKT06, the cutter permits rapid insert changes and consistent cutting performance. The insert-based concept keeps tooling costs predictable while minimising downtime because individual cutting edges can be rotated or replaced without removing the entire toolholder. The result is measurable improvement in uptime and process stability, which supports higher productivity in serial production and jobbing environments. Stable clamping and predictable runout for repeatable results With a 16 mm shank and a compact 120 mm overall length, the design prioritises secure clamping and reduced overhang. The combination of a rigid shank and 2 cutting edges provides balanced cutting forces and helps to limit vibration during operation; this leads to improved surface finish and longer insert life. The cutting length of 25 mm offers sufficient engagement for common shoulder and face milling operations on multi-axis mills and machining centres. The insert is secured by a Torx screw M3x6,5, tightened with a T8 key, ensuring repeatable clamp torque and safe retention under typical cutting loads. Practical handling, supply and qualification for production The holder’s modest mass (approx. 0.2 kg) and standardised fixing elements make it straightforward to integrate into existing tool assemblies. Spare Torx screws and replacement inserts are standard procurement items, and the holder’s compatibility with widely used 4NKT06 inserts simplifies inventory management. For purchasers seeking assurance, the tool is available via Metav Werkzeuge, which combines broad stock availability with technical advice and reliable European distribution. The combination of standardised fastenings and an industry-recognised insert form supports efficient maintenance cycles and predictable production output. Contact Metav Werkzeuge to secure Teknik Makina shank milling cutters compatible with Taegutec 4NKT06, discuss suitable insert grades and delivery options by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: S471TM Manufacturer: Teknik Makina Compatible inserts: Taegutec 4NKT06 SKU: S471TM Dimensions & weight Shank diameter: 16 mm Cutting length: 25 mm Overall length: 120 mm Diameter: 16 mm Number of cutting edges: 2 Weight: 0.2 kg Mounting & special features Torx screw: M3x6,5 Torx key size: T8 Suitability: for 4NKT 0603 indexable inserts Practical for quick insert replacement FAQ Which inserts fit this holder? The holder accepts Taegutec 4NKT06 indexable inserts; the cutter was specified for the 4NKT 0603 insert format to ensure correct seating and clamping. What secures the insert in the cutter? The insert is clamped with a Torx screw M3x6,5, tightened using a T8 key, which provides consistent clamp torque and secure retention during machining. Which machines is the tool suitable for? The compact form and 16 mm shank make the tool suitable for small to medium CNC milling machines and machining centres where limited overhang and rigid clamping are required. How does this holder support production efficiency? By using indexable inserts such as the 4NKT06, the holder reduces tool-change times and tooling costs because worn cutting edges can be rotated or replaced independently of the toolholder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com