Gibt es einen Hahn und Kolb Online Shop?

Take advantage of precise compatibility and minimal added mass: the U-plate combines direct fit for KNUX-L precision calipers with a weight of just 0.1 kg to support stable measurement set-ups and consistent repeatability. Order the U-plate directly via Metav Werkzeuge or ask our consultants if needed U-plate — accessory for KNUX-L precision calipers by Teknik Makina The U-plate is an accessory plate for KNUX-L precision calipers, intended to provide a stable mounting surface in measurement fixtures and to simplify repeatable set-ups in workshop and inspection environments Accessory plate for KNUX-L precision calipers Minimal weight: 0.1 kg Secure fitting for workshop use Easy installation and alignment Improved measurement stability with minimal mass The accessory plate is engineered to support precision calipers in fixture applications while minimising added mass. At 0.1 kg, the plate reduces the likelihood of measurement disturbance that can occur when bulky fixtures are introduced; this contributes to consistent repeatability in serial inspections. The compact footprint means the mounting surface can be integrated into confined setups without altering the measurement geometry significantly, and the direct compatibility with KNUX-L calipers streamlines process planning for quality control routines. Quick integration into existing measuring workflows Installation is straightforward and the component is designed for a direct fit to the matching caliper interface, reducing setup time and downtime in the workshop. The plate supports efficient alignment procedures and is intended to be incorporated into measurement jigs where a stable reference plane is required. By simplifying fixture assembly, the accessory plate helps maintain production flow and allows technicians to focus on measurement outcomes rather than complex mechanical adjustments. Consistent supply and suitability for professional use Sourced from Teknik Makina, the plate aligns with professional workshop needs and is suitable where compact, purpose-designed accessories are preferred. Metav Werkzeuge provides reliable distribution and a quality filter for European customers, ensuring that small but critical items such as this accessory plate are available when required. The compact accessory supports long-term operational stability by offering a predictable and compatible mounting option for calibration and inspection tasks. Contact Metav Werkzeuge today for tailored advice on the Teknik Makina U-plate TA048TM and dependable delivery from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TA048TM Name: U-plate Manufacturer: Teknik Makina Suitable for: KNUX-L precision calipers Weight: 0.1 kg eClass: 21189290 Facts Weight: 0.1 kg eClass: 21189290 SKU: TA048TM Special features Accessory plate for precision calipers Suitable for KNUX-L Compact mounting plate design FAQ Which calipers are compatible with this plate? The U-plate TA048TM is specified for use with KNUX-L precision calipers and is designed to match the caliper’s mounting interface. Will the plate affect measurement repeatability? The U-plate TA048TM adds minimal mass (0.1 kg) and is intended to support stable set-ups, helping to preserve measurement repeatability in serial inspection tasks. Is the plate supplied ready to fit? The U-plate TA048TM is supplied as an accessory plate designed for direct fit to compatible caliper mounting points; no bespoke modification is indicated in the available product data. What material is the U-plate made from? The material is not specified in the provided product data for the U-plate TA048TM. Who manufactures the accessory plate? The accessory plate is provided by Teknik Makina (Teknik Cutting Tools) and distributed under the responsibility of Metav Werkzeuge for the European market. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of compatibility with KNUX-R calipers, compact dimensions and lightweight design to improve measurement consistency and speed up workshop routines; order or request technical advice via Metav Werkzeuge for reliable supply and integration. U-Plate TA046TM – U-plate accessory for precision calipers by Teknik Makina The U-Plate TA046TM is an accessory designed to provide a stable reference for precision caliper measurements, primarily intended for use in workshop and inspection settings with compatible calipers Compatible with KNUX-R precision calipers Lightweight construction, approx. 0.1 kg Robust build for workshop use Simple fitting for consistent measurements Improve measurement precision with a stable reference The accessory creates a defined contact surface that supports precise alignment of measuring jaws and reduces small position errors during repeated checks. By combining compatibility with a well-known caliper series and a compact form factor, it promotes repeatability in routine inspection tasks. The compromise between solidity and low mass ensures minimal influence on the measuring instrument while providing a clear mechanical stop. For operations where consistent results matter, this accessory helps to reduce rework and scrap by making each measurement traceable to the same physical reference. Faster set-up and a more efficient measuring routine Fitting the plate is straightforward and intended to integrate with existing workflows, shortening the time from part handling to a verified dimension. The KNUX-R compatibility means adapters or modifications are unnecessary for matching calipers, so machine operators and quality technicians can maintain throughput without extra calibration steps. The compact footprint permits use at a crowded bench or within a dedicated inspection station, contributing to a streamlined workflow and fewer interruptions during batch checks or serial inspections. Practical partner reliability for everyday workshop needs Sourcing through an established distributor ensures steady availability and consistent quality control across deliveries. The accessory suits workshops and small-scale inspection labs that require dependable tools without extensive procurement complexity. Metav’s approach to distribution acts as a quality filter for European customers, pairing practical accessories with straightforward logistics and a wide product range to reduce supplier complexity and secure continuity of supply. For integration advice or to secure stock of the TA046TM U-Plate from Teknik Makina, contact Metav Werkzeuge in Emmerich for prompt technical support and reliable delivery. Technical data Article number: TA046TM Name: U-Plate Manufacturer: Teknik Makina Suitable for: KNUX-R Facts Weight: 0.1 kg eClass: 21189290 UID: TA046TM Special features Article type: U-plate accessory Compatible with KNUX-R calipers FAQ What is the primary purpose of the U-Plate TA046TM? The U-Plate TA046TM serves as a stable reference surface to improve alignment and repeatability when taking measurements with compatible precision calipers. Is the plate compatible with KNUX-R calipers? Yes, compatibility with KNUX-R calipers is specified; the accessory is designed to fit and work with that caliper series. How heavy is the accessory? The U-Plate TA046TM has a weight of 0.1 kg, making it easy to handle and reposition on the workbench. How is the plate installed on the caliper? The plate is intended for straightforward fitting to the measuring setup used with KNUX-R calipers, enabling a consistent mechanical stop without the need for additional adapters. What maintenance is required for long-term use? Routine visual inspection and light cleaning to remove debris are usually sufficient; the accessory is intended for low-maintenance operation in workshop environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact, lightweight and compatible with 22 IR calipers, the U plate TA063TM delivers a simple mounting solution for repeatable measurements; benefit from precise alignment, low mass (0.1 kg) and straightforward integration into existing measuring setups — order directly via Metav Werkzeuge or consult the technical team for application advice. U plate — lightweight mounting plate, compatible with 22 IR calipers (Teknik Makina) The U plate is a compact mounting accessory for precision calipers, intended to stabilise and position measuring jaws in workshop and inspection environments. Compatible with 22 IR calipers Compact, low-weight design Robust mounting for repeatable measurements Suitable for workshop and inspection use Stable mounting for consistent, measurable results A stable mounting base reduces variability in repetitive measurements. The U plate is designed to provide a fixed reference for caliper jaws, improving repeatability and reducing setup deviation in short-cycle inspections. With a nominal mass of 0.1 kg, the plate adds minimal inertia while preserving positional stability; the lightweight construction simplifies handling and repositioning during batch checks. Where traceable, repeatable readings are required, this accessory supports a controlled measuring environment and helps to maintain process quality without complex fixtures. Faster set-ups and fewer adjustment cycles Integrating a dedicated mounting plate into a measuring routine shortens alignment times and lowers the number of manual adjustments. Compatibility with 22 IR calipers ensures direct fitting to a common measuring standard, avoiding adapters or bespoke machining. The straightforward geometry of the plate means fewer setup steps, which translates into measurable time savings across repeated tasks. In practice, this leads to improved throughput in workshop inspection sequences and fewer disruptions to the production flow. Confidence through reliable sourcing and practical support Selected and supplied by an experienced partner, the U plate benefits from the manufacturer’s production standards and Metav’s role as a quality filter for the European market. Metav’s approach to democratising precision ensures access to a wide range of measuring accessories and dependable logistics from Emmerich. This combination supports long-term availability and practical service, helping to keep inspection routines predictable and resilient. For technical advice or to secure supply of the Teknik Cutting Tools U plate (TA063TM), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 — specialists will assist with compatibility checks and order processing. Technical data Article number: TA063TM Product name: U plate Manufacturer: Teknik Makina Weight: 0.1 kg eClass: 21189290 Compatibility: 22 IR calipers UID: TA063TM FAQ What calipers fit this mounting plate? The U plate TA063TM is designed for compatibility with 22 IR calipers and secures the measuring jaws for repeatable positioning. Is the plate suitable for regular workshop use? Yes, the mounting plate is intended as a lightweight workshop accessory for inspection and routine measuring tasks and is supplied by Teknik Cutting Tools under SKU TA063TM. How does the U plate improve measurement repeatability? By providing a stable reference and fixed mounting geometry, the U plate reduces positional variation and the need for repeated manual alignment during successive measurements. Can the U plate be integrated into existing test rigs? The U plate’s compact form and standard compatibility with 22 IR calipers make it suitable for straightforward integration into many established measuring setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact accessory that secures repeatable measurements and integrates cleanly into an existing workshop workflow; the compatibility with SEET 12 and the lightweight construction (0.1 kg) make it a practical choice for precision tasks. Order the part directly via Metav Werkzeuge or ask the consultants for specification details. U-plate TA052TM — Caliper mounting accessory with SEET 12 compatibility by Teknik Makina The U-plate TA052TM is a compact mounting accessory intended to support the SEET 12 precision caliper in workshop and inspection environments Compatible with SEET 12 calipers Compact U-plate accessory Lightweight at 0.1 kg Article number TA052TM Reliable positioning for precision measurement The compact mounting plate delivers a stable reference point for handheld or bench-mounted measuring work, ensuring repeatable readings when using compatible calipers. Designed as an accessory for the SEET 12 system, this U-plate minimises handling variation and supports consistent measurement sequences in production and quality-control routines. The low mass of 0.1 kg reduces inertial effects during repositioning, which preserves accuracy across multiple checks and short measurement cycles. Small footprint, improved process efficiency A small workshop accessory can have an outsized effect on workflow: reduced setup time and straightforward integration help maintain production throughput while safeguarding measurement integrity. The slim profile and straightforward form factor make the component suitable for cramped benches and shared inspection stations, helping to avoid clutter without compromising function. Where tool changeovers are frequent, the accessory supports faster handovers between operators and less incidental error during routine verifications. Assured supply and application guidance from a precision partner Sourcing through an established distributor provides traceability and predictable lead times. As part of the Teknik Makina range and listed under SKU TA052TM, the U-plate benefits from distribution via a partner that combines wide stock coverage with focused metrology expertise. Metav’s role as a European distribution hub offers logistical reliability and additional product context for measurement applications, supported by a large customer base and a broad product portfolio that simplifies procurement for workshops and industry alike. Contact Metav Werkzeuge for technical details and delivery options on TA052TM — Tel +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: TA052TM Designation: U-plate Manufacturer: Teknik Makina Compatible with: SEET 12 eCl@ss: 21189290 Facts Weight: 0.1 kg SKU: TA052TM Special features Suitable for precision calipers Compact accessory design Compatible with SEET 12 FAQ What is the primary purpose of the U-plate TA052TM? The U-plate TA052TM serves as a mounting accessory to provide a stable reference and improved repeatability when using the SEET 12 caliper in measurement and inspection tasks. Is the U-plate compatible with other calipers? Compatibility is specified for the SEET 12 system; the U-plate TA052TM is optimised for that caliper model and its mounting geometry. How heavy is the U-plate TA052TM? The U-plate TA052TM has a weight of 0.1 kg, which helps keep handling light and positioning stable during use. Who manufactures the U-plate TA052TM? The component is offered by Teknik Makina and listed under SKU TA052TM; distribution and further product information are available via Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precise, space-saving clamping solution that reliably mates with WNMG 08 inserts while keeping tool inertia low; the combination of straightforward compatibility and compact mass ensures efficient turning operations with minimal setup time. Order directly via Metav Werkzeuge or consult the team for application advice. U plate — compact clamping plate for indexable inserts by Teknik Cutting Tools U plate is a compact clamping plate intended for secure mounting of indexable turning inserts in industrial turning applications, offering straightforward compatibility with common WNMG 08 geometries Compact U plate design Compatible with WNMG 08 inserts Lightweight: 0.1 kg Suitable for precision tool holding Precision clamping that improves machining consistency A compact clamping plate engineered for repeatable positioning reduces micro-movements at the cutting edge and helps maintain a stable cutting geometry. The plate’s low mass (approx. 0.1 kg) lowers rotating and oscillating inertia, which can improve surface finish and reduce chatter in many turning applications. Designed to accept the widely used WNMG 08 insert family, this component integrates with standard indexable tooling systems, enabling predictable tool behaviour and easier process control. Where tight tolerances matter, a stable insert mount translates directly into fewer reworks and more consistent cycle times. Faster set-up and smoother workshop workflows The simple geometry of this plate supports quick assembly into compatible holders, shortening changeover times and increasing productive machining hours. As part of a rational procurement strategy, selecting an accessory that matches existing insert standards (such as WNMG 08) avoids adaptors or bespoke fixtures and reduces inventory complexity. The modest weight and compact footprint of the plate make handling safer and faster during tool pre-setting and balancing. For organisations seeking dependable supply and consolidated sourcing, Metav Werkzeuge’s offering channels provide technical guidance and dependable logistics from the Emmerich hub. Clear compatibility guidance for practical use Intended as a component in clamping and tool-holding systems, the U plate supports established indexable insert formats and is suitable where a small, robust mounting solution is required. The item’s compatibility with WNMG 08 positioning means it is applicable across a broad range of turning operations using these inserts, from roughing to finishing passes depending on the tool geometry and cutting data chosen. Where material, coating or holder specifics influence performance, pairing this plate with the correct insert grade and holder design is recommended to achieve intended productivity gains. For precise advice on integrating this Teknik Cutting Tools U plate into existing tooling systems or for supply direct from Metav Werkzeuge’s European distribution centre, contact Metav Werkzeuge for tailored recommendations and fast delivery from Emmerich Technical Data Article number: TA020TM Description: U plate Manufacturer: Teknik Makina SKU: TA020TM Facts Weight: 0.1 kg ECLASS: 21189290 UID: TA020TM Special features Compatible with WNMG 08 inserts Compact clamping geometry Intended for indexable turning tool systems FAQ How does this plate improve insert stability? The U plate provides a compact mounting surface that reduces movement at the insert seat, improving stability for WNMG 08 inserts and supporting more consistent cutting forces and surface finish. Is the plate suitable for all WNMG 08 holders? Compatibility is intended for systems that accept standard WNMG 08 insert positioning; verify the holder geometry and clamping method to ensure a correct fit. What weight and handling characteristics does the component have? The component weighs approximately 0.1 kg, making it easy to handle during tool changes and pre-setting while contributing minimal inertia in rotating assemblies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precision-oriented mounting solution that combines compatibility with the VCMT 16 caliper and a low mass of 0.1 kg for easy handling and repeatable set-ups; order supply or request advice via Metav Werkzeuge for quick clarification and reliable delivery. U-plate – compact mounting plate, compatible with VCMT 16 (Teknik Makina) The U-plate is a compact mounting plate that provides a stable locating point for precision measuring with bench or hand calipers, primarily intended for workshop measuring and fixture use. Compact mounting plate for precision measuring Compatible with VCMT 16 calipers Lightweight construction, 0.1 kg Simple integration into measuring setups Stable reference for repeatable measurements The U plate offers a concise and rational solution where consistent reference positioning matters. By matching the geometry required for the VCMT 16 caliper, the plate reduces setup variations and shortens cycle time for routine checks. Its low weight of 0.1 kg supports fast handling without compromising positional consistency, which helps maintain throughput in measuring routines. The clear functional purpose—serving as a repeatable datum—translates into fewer adjustment steps and a more efficient workflow. Practical advantages in everyday workshop use Compactness and straightforward integration are the primary operational benefits. The mounting plate’s small footprint permits placement directly at a bench or within measuring jigs, saving space while enabling quicker part inspection. Where frequent tool changes occur, the plate’s form factor allows simple repositioning and storage. Compatibility with established caliper types simplifies procurement and reduces the need for custom adaptors, supporting a pragmatic approach to workshop organisation and inventory consolidation. Integration into a quality-focussed supply chain Sourcing the plate from a recognised maker such as Teknik Makina supports consistent manufacturing tolerances and traceability. The product’s SKU TA032TM ensures unambiguous identification within procurement processes. For companies aiming to centralise precision equipment, a standardised small part like this mounting plate assists in harmonising measuring set-ups and reduces the risk of measurement variation across different workstations. The result is a measurable improvement in process reliability and easier documentation for quality records. For supply and technical advice on the Teknik Makina U-plate (TA032TM), contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt, reliable fulfilment. Technical data Article number / SKU: TA032TM Name: U plate Manufacturer: Teknik Makina Suitable for caliper: VCMT 16 Weight: 0.1 kg eClass: 21189290 Facts Weight: 0.1 kg eClass: 21189290 Special features Compatible with VCMT 16 calipers Compact U-shaped plate design Lightweight, easy to position FAQ What is the primary purpose of the U-plate? The U-plate functions as a compact mounting plate to provide a repeatable locating point for precision measuring, especially when used with the VCMT 16 caliper. Which calipers are explicitly compatible with this plate? Compatibility is specified for the VCMT 16 caliper; no additional model compatibility is listed for the TA032TM. What is the weight and handling advantage of the plate? The U-plate weighs 0.1 kg, giving easy handling and quick repositioning while keeping a small footprint on the bench. Who manufactures the product and how is it identified? The product is supplied by Teknik Makina and is identified in stock by SKU TA032TM for precise ordering and inventory control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise compatibility with the TPKN 22 caliper and a compact, lightweight design that simplifies workshop integration and saves bench space. Order the U-Plate directly via Metav Werkzeuge or ask our consultants for tailored advice. U-Plate — mounting plate compatible with TPKN 22 from Teknik Makina The U-Plate is a compact mounting plate designed to accept the TPKN 22 caliper, providing a practical solution for secure attachment in workshop and inspection setups. Compatible with TPKN 22 caliper Lightweight at 0.1 kg Compact mounting solution Reliable compatibility that speeds inspection workflows The first priority for workshops is reproducible, straightforward measurement setups. The U-Plate delivers on that need through its direct compatibility with the TPKN 22 caliper, which removes the guesswork when pairing fixtures and instruments. With a slim profile and purpose-driven form, this mounting plate enables fast assembly and repeatable positioning, reducing setup time and supporting efficient quality control cycles. Easy integration and practical handling on the shop floor A lightweight accessory such as this plate keeps handling simple and reduces strain during repeated use. At just 0.1 kg, the component is easy to manoeuvre and reposition, so assembly tasks remain quick and manageable even in busy environments. The combination of low mass and clear mechanical purpose supports adaptable workstation layouts, helping workshops maintain order while ensuring measuring devices are readily at hand. Sourced for dependable supply and workshop confidence This item is listed under SKU TA012TM and produced by Teknik Makina, a recognised name for workshop fittings. When combined with Metav’s distribution approach—which acts as a quality filter for the European market—buyers benefit from a dependable supply chain and a broad offering of compatible tools and accessories. The clear specification and simple compatibility help purchasing teams standardise equipment without overcomplication. For procurement or product-matching advice on the Teknik Makina U-Plate (SKU TA012TM), contact Metav Werkzeuge GmbH for local support and fast delivery options Technical data Article number: TA012TM Name: U-Plate Manufacturer: Teknik Makina Data Weight: 0.1 kg eCl@ss: 21189290 Special features Suitable for TPKN 22 caliper Category: U-plate mounting solution FAQ What caliper is the plate designed for? The U-Plate (Teknik Makina, SKU TA012TM) is designed specifically for use with the TPKN 22 caliper. Is the material specification provided for the plate? No material is specified in the available data for the U-Plate TA012TM; the manufacturer’s product sheet should be consulted for material details. What is the weight of the U-Plate? The weight of the U-Plate (SKU TA012TM) is 0.1 kg. Can the plate be used for fixed workshop fixtures? The U-Plate is intended as a compact mounting solution compatible with the TPKN 22 caliper, suitable for incorporation into workshop fixtures where that caliper is used. How is the product identified for ordering and stock control? The product is listed under SKU TA012TM and as the U-Plate by Teknik Makina for clear identification in procurement and inventory systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, lightweight fastening solution with clear identification and dependable supply: the BSP031TM combines space-saving design and easy inventory handling for efficient workshop assembly. Order the U washer directly via Metav Werkzeuge or consult our specialists for integration advice. U washer BSP031TM — compact fastening washer by Teknik Makina The U washer offers a compact fastening component intended to improve load distribution in bolted assemblies and to simplify parts handling in workshop and industrial settings. Compact fastening washer, space-saving design Lightweight at 0.1 kg per piece Identified by SKU BSP031TM Manufactured by Teknik Makina Better load distribution for longer-lasting joints A simple washer can make a decisive difference in joint reliability. By increasing the effective bearing area, the washer reduces peak stresses beneath heads and nuts, helping to protect softer contact surfaces and decreasing the chance of local deformation. The documented weight of 0.1 kg indicates a lightweight component that nevertheless contributes to improved load distribution; this is particularly useful where repeated assembly and disassembly require consistent contact conditions. For production planners, a standardised washer saves time during assembly and reduces the need for rework caused by damaged clamping surfaces. Streamlined logistics and assembly efficiency Clear identification by SKU BSP031TM supports stock management and traceability in the workshop. The compact format minimises storage volume and eases handling on the assembly line, which can reduce picking times and improve throughput. Where a high parts count is managed, consistent labelling and small, uniform components help maintain an orderly inventory. The washer’s straightforward geometry allows for quick visual checks during incoming inspection and straightforward placement during bolting operations, contributing to steady, repeatable assembly processes. Proven sourcing and dependable supply chain Sourcing from an established manufacturer brings tangible advantages: consistent production standards and predictable deliveries help avoid supply interruptions. The association with Teknik Makina and the Metav distribution network provides a quality filter for the European market, aligning with workshop needs for reliable, repeatable parts supply. For procurement teams, this translates into lower administrative effort and fewer supplier touchpoints, supporting uninterrupted production and accurate stock forecasting. For procurement or technical guidance on integrating Teknik Makina fastening components into existing assemblies, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 for advice and ordering via our European distribution hub. Technical Data Article number: BSP031TM Manufacturer: Teknik Makina eClass: 21189290 Weight: 0.1 kg Facts Weight (kg): 0.1 eClass: 21189290 Special features Product name: U washer SKU: BSP031TM FAQ What is the unit weight of the U washer BSP031TM? The U washer BSP031TM has a unit weight of 0.1 kg, as specified in the product data. Who manufactures the BSP031TM washer? The BSP031TM washer is manufactured by Teknik Makina and distributed via the Metav supply network. What is the intended function of this washer? The washer is intended as a fastening component to improve bearing area and reduce local stress beneath fasteners in bolted joints. How is the product identified for ordering and inventory? The component is identified by SKU BSP031TM, which should be used for order and stock management. Is material or coating information available for this washer? Material and coating details are not specified in the provided product data; please refer to the manufacturer’s specifications for technical confirmation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a simple, robust component that improves assembly reliability and streamlines stockkeeping: the compact geometry offers secure load distribution while the low mass supports efficient handling and transport. Order directly via Metav Werkzeuge or consult the team for specification matching. U-washer BSP032TM — U-shaped fastening washer, compact and dependable (Teknik Makina) U-washer BSP032TM is a U-shaped fastening washer intended for general assembly and maintenance tasks in workshops and light industrial applications Robust U-shaped geometry for secure fastening Lightweight component, weight 0.1 kg Compatible with common fastening systems Proven reliability for routine fastening tasks The U-washer offers a straightforward mechanical solution where a washer must engage around a shaft or bolt without full enclosure. Its U-shaped geometry distributes clamping forces more evenly than a bare fastener, reducing localised stress and helping to maintain joint integrity during vibration or thermal cycling. This design is particularly useful in repetitive assembly operations where consistent performance is required and downtime must be minimised. The description focuses on the washer's functional contribution to a reliable connection rather than decorative aspects. Practical benefits for workshop workflows With a nominal weight of 0.1 kg, this component is easy to handle and store, making it suitable for lean inventory systems and accelerated pick-and-place assembly lines. The washer's form factor supports rapid fitting and removal, which can contribute to shorter assembly times and fewer interruptions on the production floor. As the piece is compatible with common fastening systems, it fits into existing tool sets and maintenance procedures without extensive adaptation, helping to keep the process efficient and predictable. Supply assurance and traceable origin Manufactured by Teknik Makina, the washer is supplied through Metav's distribution in Emmerich, where every shipment passes a practical quality filter for the European market. Metav's experience in precision tooling and workshop equipment means deliveries are supported by technical advice and reliable logistics. The combination of established production and a dependable supply chain provides a pragmatic basis for specifying this component in standard assemblies or as a recurring replenishment item. For delivery options and application advice on the Teknik Cutting Tools U-washer (SKU BSP032TM), contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss lead times and suitability for the intended assembly. Technical data SKU: BSP032TM ECLASS: 21189290 Weight: 0.1 kg Facts Designation: U-washer Manufacturer: Teknik Makina UID: BSP032TM Special features U-shaped fastening washer Intended for general workshop and assembly use Supplied via Metav Werkzeuge distribution FAQ What is the primary function of this washer? The Teknik Makina U-washer (SKU BSP032TM) serves to distribute clamping force and support secure fastening where a standard flat washer may not fit or where lateral engagement is required. Can this washer be used in vibration-prone assemblies? Yes, the U-shaped geometry of this washer helps to maintain joint stability under vibration by improving load distribution, though final suitability should be judged against the assembly's specific dynamic conditions. How should this washer be stored in a workshop environment? Store the washers in a dry, organised bin system close to the assembly point to benefit from the component’s lightweight nature and to reduce retrieval time during production. Is technical advice available for integrating this washer into a production line? Technical guidance is available through Metav Werkzeuge; discuss the application and assembly requirements to ensure the BSP032TM washer aligns with the intended fastening system. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, CCMT 09‑compatible mounting solution that combines space-saving design with straightforward integration for faster setups; order the U-plate directly via Metav Werkzeuge or consult our specialists for application advice. U-plate – Compact mounting plate with CCMT 09 compatibility by Teknik Makina The U-plate is a compact mounting plate intended for workshop fixture use and designed for compatibility with CCMT 09 turning inserts. Compatible with CCMT 09 inserts Compact, lightweight 0.1 kg Space-saving workshop mounting Easy integration in fixture setups Guaranteed fit with common turning inserts for faster setup The U‑plate is specified for use with CCMT 09, an established turning insert designation, which ensures a standardised interface and predictable alignment in lathe and fixture assemblies. By matching the common insert geometry, the mounting plate reduces adjustment time during tool changes and supports repeatable positioning. For workshops that rely on quick changeovers, this compatibility translates into measurable time savings and fewer alignment checks between operations. Small footprint and low handling weight for efficient workflows Weighing just 0.1 kg, the plate offers a genuinely lightweight solution where every gram and millimetre of bench space counts. The minimal mass simplifies handling during fixture assembly and makes storage and transport less cumbersome between workstations. Its compact form factor is particularly useful in confined setups or mobile tool trolleys, where bulkier components would otherwise impede efficient organisation and access to cutting tools. Integration-focused design that supports practical workshop routines Designed as a simple, reliable element in clamping and mounting arrangements, the U‑plate streamlines the interface between inserts and holding devices. The uncomplicated geometry supports rapid installation into existing setups and reduces the likelihood of assembly errors, promoting steady throughput across repetitive tasks. Where material or coating specifications are required for specialised applications, the available product data does not specify these properties; for such cases consult the technical datasheet or product documentation before specifying for corrosive or high‑wear environments. For a compact, CCMT 09‑compatible mounting solution from Teknik Makina, contact Metav Werkzeuge to arrange supply or technical clarification via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TA015TM Name: U-plate Manufacturer: Teknik Makina Facts Weight: 0.1 kg eCl@ss: 21189290 Special features Suitable for: CCMT 09 FAQ What turning inserts does the U-plate fit? The U-plate is specified for compatibility with CCMT 09, making it suitable for setups that use this standard insert geometry and simplifying insert interchangeability. How much does the plate weigh and what is the practical benefit? With a weight of 0.1 kg, the plate is extremely lightweight, which eases handling, storage and fitting during frequent tool or fixture changes. Is the plate suitable for confined workbench spaces? Yes — the compact design and low mass make the U-plate well suited to small workstations and mobile tool trolleys, where space efficiency is important. Are material and coating details available for the U-plate (TA015TM)? The provided product data for TA015TM does not list material or coating; consult the technical documentation for full construction details before use in specialised environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precision-oriented solution that combines reliable compatibility with CCMT 12 inserts and a very low handling weight for faster set-ups; the compact design supports efficient changeovers and steady workshop routines. Order the U-plate directly via Metav Werkzeuge or consult the technical advisers for application-specific guidance. U-plate TA015-1TM — compact mounting plate, compatible with CCMT 12 inserts (Teknik Makina) The U-plate TA015-1TM is a compact mounting plate intended for use in workshop and light industrial tool setups where compatibility with CCMT 12 inserts is required, providing a simple way to standardise small tooling interfaces. Compact mounting plate for tool holders Compatible with CCMT 12 inserts Lightweight: 0.1 kg for easy handling Durable design for regular workshop use Faster set-ups through precise compatibility The mounting solution has been designed to deliver consistent positioning where repeatability matters. By matching the established CCMT 12 insert form factor, the plate reduces alignment guesswork and supports predictable tool behaviour during short changeovers. This compatibility translates into measurable time savings at the workbench: fewer adjustments, shorter downtime and a clearer process for tool replacement. The emphasis on precision ensures that setups remain stable across multiple cycles, so single-point benefits—reduced set-up time and improved process reliability—are obtained without complex procedures. Light weight that eases handling and reduces cycle interruptions At only 0.1 kg, the component improves manual handling and speeds up routine operations. The low mass reduces the effort required when changing small assemblies, which helps to lower the physical strain on staff during repeated interventions and shortens the time taken per exchange. For production environments where many small adjustments are performed daily, a lightweight solution supports leaner workflows and contributes directly to operator efficiency. The combination of minimal weight and practical form makes the item suitable for tight workspaces where agility and quick reconfiguration are required. Workshop-ready design that integrates into standard tool chains This plate is intended for straightforward incorporation into standard tooling arrangements that accept the CCMT family of inserts, offering a pragmatic option for workshops seeking simple, repeatable interfaces. The product supports routine machining and finishing tasks that depend on predictable insert seating. As part of a broader supply chain, the item complements efforts to reduce vendor complexity by choosing components that align with common industry formats. Where clarity on fit or application is required, the provenance and distribution from established partners lend further assurance of consistent quality. For reliable CCMT 12 compatibility and minimal handling weight, choose the Teknik Makina U-plate TA015-1TM via Metav Werkzeuge — contact Metav Werkzeuge for product availability and procurement details at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TA015-1TM SKU: TA015-1TM Manufacturer: Teknik Makina Facts Weight: 0.1 kg ECLASS: 21189290 Special features Compatible with CCMT 12 Lightweight mounting plate FAQ What inserts is this plate compatible with? The U-plate TA015-1TM is compatible with CCMT 12 insert formats and intended to interface with holders designed for that family. How heavy is the component and how does that affect handling? The item weighs 0.1 kg, a low mass that simplifies manual handling and speeds up changeovers in high-frequency operations. Is the plate suitable for regular workshop use? The plate is designed for regular workshop environments where standard CCMT insert compatibility and repeatable seating are required. Which manufacturer produced this mounting plate? The mounting plate is supplied by Teknik Makina and listed under SKU TA015-1TM for identification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a lightweight, CNMG 12-compatible mounting plate that improves toolholding consistency and reduces fixture mass for faster tool changes; its small form factor and reliable build make it suitable for compact turning setups. Order the U-plate directly via Metav Werkzeuge or ask our consultants if clarification is needed. U-Plate — Compact mounting plate for CNMG 12 inserts by Teknik Makina A U-Plate from Teknik Makina designed for secure mounting of CNMG 12 turning inserts in space‑constrained toolholding applications. Lightweight 0.1 kg mounting plate Compatible with CNMG 12 inserts Robust build by Teknik Makina Compact design for tight toolholders Greater efficiency through lower mass and fast handling The mounting plate reduces rotating or handling mass thanks to its 0.1 kg weight, which supports quicker setup and reduced inertia in fixtures. For production environments where cycle time and repeatability are important, the lightweight construction contributes to faster tool changes and easier positioning. The design focuses on practical benefits: less fixture mass and reliable seating for insert interfaces, improving throughput without introducing complex procedures. Clear compatibility for predictable machining results Compatibility with CNMG 12 inserts is indicated directly in the specification, providing a clear, technical basis for selection in turning tool assemblies. The plate serves as a dedicated adapter in clamping systems where standard triangular inserts of the CNMG geometry are used. Technical teams benefit from simple integration: the known insert format reduces setup questions and streamlines toolholder selection, supporting consistent machining results across batches. Robustness that supports workshop reliability Although compact, the plate is manufactured to withstand regular workshop use; its Teknik Makina origin signals a component intended for industrial service. The emphasis is on stable seating and repeatable alignment rather than decorative finish, so the primary advantages are operational: consistent interface behaviour and durable contact surfaces. This focus on functional durability reduces rework and supports predictable maintenance intervals for tool assemblies. Practical fit for constrained toolholders and retrofits The compact footprint makes the plate suitable where space is limited or when retrofitting existing holders to accept CNMG 12 inserts. The straightforward geometry allows integration without major modifications to the surrounding tooling, enabling an efficient path to upgrade or adapt existing setups. Technical documentation and SKU identification simplify purchasing and inventory tracking for production managers. Confidence with European supply and specialist distribution Sourcing via a specialist distributor provides logistical advantages for industrial customers: stock management, centralised ordering and a quality filter at the regional hub. Relying on established distribution channels ensures a consistent supply of this utility component so production planning remains dependable. The combination of a focused design, clear compatibility and reliable distribution supports effective toolroom operations. For reliable mounting of CNMG 12 inserts, choose the Teknik Makina U-Plate and contact Metav Werkzeuge for procurement and expert supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for guidance and rapid processing Technical data Article number: TA016TM Product name: U-Platte / U-Plate Manufacturer: Teknik Makina Facts Weight: 0.1 kg eCl@ss: 21189290 SKU: TA016TM Special features Compatibility: CNMG 12 Compact mounting plate design Intended for insert mounting applications FAQ Is the plate compatible with CNMG 12 inserts? Yes. The U-Plate (SKU TA016TM) is specified for use with CNMG 12 inserts and is intended to provide a secure mounting interface for that insert geometry. What is the weight of the mounting plate? The Teknik Makina U-Plate has a weight of 0.1 kg, which supports lower fixture mass and easier handling during tool changes. Can the plate be used in tight toolholder spaces? The plate’s compact design is suited to constrained toolholder environments and retrofits where minimal footprint is required for insert mounting. Who supplies this part for European workshops? The U-Plate is distributed via Metav Werkzeuge for the European market, providing centralised supply and warehouse support from Emmerich. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

A compact, lightweight mounting solution that combines a precision fit with straightforward integration into existing tool setups; compatibility with CNMG 12 ensures interchangeability with common insert systems and reduces set-up time. The plate's low mass and concise footprint support quicker handling and safer storage. Order the U-Plate directly via Metav Werkzeuge or ask our consultants if needed. U-Plate TA016-1TM – compact mounting plate, compatible with CNMG 12 (Teknik Makina) The U-Plate is a compact mounting plate designed to provide a reliable interface for CNMG 12-compatible applications, offering straightforward integration into workshop fixtures and clamping assemblies Compact U-plate, space-saving design Compatible with CNMG 12 inserts Lightweight: 0.1 kg for easy handling SKU TA016-1TM for quick reference Faster set-ups through precise compatibility The U-Plate was developed to deliver a precision fit with CNMG 12-compatible components, which helps to reduce alignment time during tool changes. A predictable locating interface minimises iterative adjustments and supports consistent positioning in serial operations. For production environments where process time is critical, reliable interchangeability translates into measurable efficiency gains and fewer stoppages caused by misalignment. Easier handling and ergonomic advantages With a mass of just 0.1 kg, the plate is noticeably lightweight, simplifying manual handling during assembly and storage. The low weight reduces strain during repeated tool changes and supports faster fixture reconfiguration on the shop floor. Where operators are required to change components frequently, a compact, low-mass plate improves workflow ergonomics and contributes to a steadier, safer handling routine. Straightforward identification and workshop integration Marked as TA016-1TM, the component is prepared for quick identification in inventory systems and for seamless integration into existing fixtures. Produced by Teknik Makina, the plate suits environments where compact mounting solutions are preferred and where CNMG 12 compatibility is required. Clear SKU labelling and a minimal footprint assist in orderly storage and rapid retrieval, supporting clean, efficient workshop processes. For specification checks, availability or to request order information contact Metav Werkzeuge in Emmerich and quote SKU TA016-1TM for rapid assistance Technical data Article number: TA016-1TM Name: U-Plate Manufacturer: Teknik Makina eClass: 21189290 Facts Weight: 0.1 kg ECLASS: 21189290 Special features Compatible with CNMG 12 SKU: TA016-1TM FAQ What is the primary application of this plate? The U-Plate TA016-1TM is intended as a compact mounting plate for setups that require compatibility with CNMG 12-aligned components and simple fixture integration. What is the weight of the component? The plate has a weight of 0.1 kg, which supports easy manual handling and quick tool changes. Is the plate compatible with insert systems other than CNMG 12? The available product data specifies compatibility with CNMG 12; compatibility with other insert systems is not listed in the provided information. How is the product identified in stock and documentation? Identification is via SKU TA016-1TM and the designation U-Plate, enabling fast lookup in inventory and ordering systems. What material is the plate made from? Material information is not specified in the supplied product data. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact compatibility with CNMG 19 inserts and a featherlight mass of 0.1 kg make this U plate a practical choice for streamlined tool set-ups; its clear SKU reference (TA017TM) simplifies procurement and stock control. Order directly via Metav Werkzeuge or consult their specialists for application advice. U plate – support plate for CNMG 19 inserts (Teknik Makina) U plate designed as a compact support plate for CNMG 19 indexable inserts in turning tool assemblies Compatible with CNMG 19 inserts Lightweight design — 0.1 kg Teknik Makina production quality SKU TA017TM for easy ordering Efficient compatibility for turning applications The U plate is specified for use with CNMG 19 indexable inserts, offering a concise solution for workshops and production lines that standardise on this insert geometry. Compatibility with a recognised insert grade ensures predictable seating and clamping behaviour, which in turn reduces set-up time and minimises unexpected tool changes. By referencing TA017TM at purchase, procurement teams obtain a clear article identifier for inventory systems and reordering. Practical handling and workshop integration At just 0.1 kg, this support plate is simple to position and handle during tool assembly changes, allowing faster tool swaps and less operator fatigue in repetitive processes. The compact mass supports modular toolholder strategies where quick replacement and balanced tool assemblies are priorities. Clear labelling and the SKU help with storage allocation and traceability within a central parts bin at the workbench, contributing to seamless workflow integration. Proven supply and dependable documentation Supplied by Teknik Makina and offered through Metav's distribution, the component benefits from a transparent supply chain and straightforward ordering. The concise technical identity — compatibility, SKU and weight — aids maintenance planning and spare-parts stocking. For specifications not listed in the basic data, Metav Werkzeuge can provide additional technical documentation or clarification to ensure the plate meets the intended turning application. How this part supports production efficiency Using a dedicated support plate for a specific insert type simplifies standardisation across multiple lathes or cellular workstations, reducing the variety of spare components required. A clear article reference (TA017TM) streamlines procurement and reduces the risk of incorrect parts being issued. This focused approach helps maintain uptime and supports consistent component replacement procedures, contributing to reliable output and easier process control. For CNMG 19-compatible tool assemblies from Teknik Makina, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich. Technical Data Article number: TA017TM Manufacturer: Teknik Makina Facts Weight: 0.1 kg eClass: 21189290 Special features Suitable for CNMG 19 inserts Compact support plate for tool assemblies Supplied via Metav Werkzeuge distribution network FAQ What insert type is this plate intended for? This support plate is intended for use with CNMG 19 indexable inserts; the product is listed under SKU TA017TM for clear identification. Is the exact material specified for the plate? The material is not specified in the provided data; for material details and mechanical properties, please request technical documentation from Metav Werkzeuge or Teknik Makina. How does the 0.1 kg weight benefit workshop operations? A weight of 0.1 kg eases manual handling during tool changes and supports faster assembly swaps, improving ergonomic handling and reducing downtime. Can this plate be used across different toolholders? The plate is described as compatible with CNMG 19 inserts; compatibility with specific toolholders depends on the holder design and mounting arrangements—verify fitment with Metav Werkzeuge using SKU TA017TM. Is there a clear article reference for procurement systems? Yes, the article number TA017TM provides a unique identifier for ordering and stock management through Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compact compatibility and lightweight design for seamless integration into precision measuring setups; the combination of dependable TekniK Makina manufacturing and clear SKU identification ensures fast procurement and traceability. Order the U-plate directly via Metav Werkzeuge or ask the Metav consultants for application support. U-plate TA030TM — Caliper accessory, compatible with DCMT 11 by Teknik Makina The U-plate is a compact caliper accessory designed for simple integration into metrology routines, primarily intended for applications where a small, identifiable fitting for DCMT 11 calipers is required. Compact accessory for DCMT 11 calipers Lightweight 0.1 kg for easy handling Teknik Makina manufacturing quality SKU TA030TM for quick identification Faster, more reliable measuring set-ups with compact alignment The compact construction of this caliper accessory reduces handling time and supports consistent measuring workflows. By providing clear compatibility with DCMT 11 calipers and a concise identifier (SKU TA030TM), the accessory simplifies inventory management and tool station layout. The low mass (0.1 kg) reduces inertia when placing or removing the fitting, which means less adjustment time during repetitive measuring tasks. For workshops and inspection benches where efficiency matters, the combination of compatibility and traceability contributes directly to fewer interruptions and a smoother measurement process. Simple integration and clear traceability for workshop logistics Integration into a metrology bench is streamlined by the accessory’s explicit suitability for a defined caliper type. The labelling and SKU make it straightforward to allocate the part within tool cabinets and digital inventories, reducing the risk of misplacement. As an accessory from Teknik Makina, the part benefits procurement channels that value standardised components; replacement and restocking decisions are faster when identification is unambiguous. Clear part identification also assists calibration cycles and internal audits, since the item can be tracked across quality-control records without ambiguity. Built for dependable everyday use in measurement contexts While compact, the fitting is intended for routine use in industrial metrology and workshop environments where repeatability and predictable performance are required. The accessory’s design supports consistent seating with the intended caliper system, helping maintain measurement stability across multiple operations. The practical benefit is reduced rework and fewer measurement-related delays. For buyers seeking components that integrate with established caliper-based processes, the accessory represents a pragmatic choice that balances simplicity with the expectations of professional metrology workflows. For procurement or technical clarification on the Teknik Makina U-plate (SKU TA030TM), contact Metav Werkzeuge for expert advice and delivery from Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: TA030TM Name: U-plate Manufacturer: Teknik Makina Core data Weight: 0.1 kg eClass: 21189290 UID: TA030TM Special features Compatible with DCMT 11 calipers Caliper accessory for metrology use Lightweight design for easy handling FAQ What calipers is this accessory compatible with? The accessory is compatible with DCMT 11 calipers and is supplied as SKU TA030TM by Teknik Makina for straightforward matching. Is the U-plate suitable for workshop use or only laboratory environments? The U-plate was developed for everyday metrology tasks and is suitable for workshop inspection benches as well as controlled lab settings. How does the SKU help with procurement and inventory? SKU TA030TM provides clear identification for ordering and stock management, enabling fast procurement via Metav Werkzeuge and simple traceability in quality systems. Can the accessory affect measurement accuracy? When used with the specified caliper type, the U-plate supports stable seating and consistent handling, which contributes to repeatable measuring outcomes. Who manufactures the accessory and where can it be sourced? The accessory is manufactured by Teknik Makina and can be procured through Metav Werkzeuge with the SKU TA030TM referenced in orders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compact U-profile, proven compatibility with DNMG 15 inserts and a featherlight design to simplify tool holding and minimise setup time; order directly via Metav Werkzeuge or consult our specialists for application advice. U-plate — Compact U-profile mounting plate for insert tooling, compatible with DNMG 15 The U-plate is a small mounting plate for workshop and toolroom applications, designed to support insert-based tooling systems and to integrate smoothly into existing clamping arrangements Compatible with DNMG 15 inserts Lightweight at 0.1 kg Compact U-profile for secure mounting Manufactured by Teknik Makina Precise compatibility reduces setup time and rejects The principal benefit of the U-plate is its clear specification for DNMG 15 compatibility, which streamlines tool selection and reduces guesswork when assembling holders and adapters. Specified compatibility means that the plate, which functions as a support and locating element, can be combined with standard DNMG indexable inserts without requiring bespoke adaptors. This rational, standards‑based approach shortens changeover times and contributes to a predictable machining process by avoiding mismatched interfaces that would otherwise require rework or adjustment. Lightweight design for quick handling and safe storage At roughly 0.1 kg, the component is extremely light, which gives tangible ergonomic advantages in the workshop environment. The reduced mass allows for faster manual handling during set-up and replacement cycles, and contributes to less strain when components are moved frequently across benches or between tool cabinets. The compact nature of the U-profile also means minimal storage footprint, enabling tidier organisation of tool kits and faster retrieval—factors that improve overall shopfloor efficiency. Robust integration into clamping assemblies Although compact, the plate is conceived to work as a stable clamping element within a tooling stack; its U-profile provides secure seating and repeatable orientation for the supported insert or holder. In practical terms, a reliable seating interface reduces micro-movements during cutting operations, which helps maintain consistent chip formation and surface finish. Where process stability is a priority, choosing components with clear mechanical fitment criteria ensures predictable behaviour under load and simplifies quality assurance procedures. Practical information for procurement and workshop use The minimalist specification of this item makes it straightforward to manage in procurement systems and spare parts lists: the small dimensions and single-purpose design mean fewer variants are required, lowering inventory complexity. The plate’s manufacturer, Teknik Makina, supplies it under SKU TA014-1TM, which can be cited when ordering or checking compatibility. For workshop planners seeking to rationalise tooling—linking insert types to fixed mounting plates—this component supports a compact, modular approach that reduces downtimes associated with mismatched parts. For supply and technical advice regarding the Teknik Makina U-plate, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com to confirm suitability for specific tooling systems and delivery options. Technical data Article number: TA014-1TM Manufacturer: Teknik Makina Compatible with: DNMG 15 Weight: 0.1 kg ECLASS: 21189290 Facts Mass: 0.1 kg ECLASS code: 21189290 Special features U-profile mounting plate Designed for use with DNMG 15 inserts Compact, low-mass component FAQ Is the plate suitable for standard DNMG 15 turning inserts? Yes. The U-plate is specified for compatibility with DNMG 15 inserts and is intended to provide a stable seating for such insert-based tooling. What is the weight and how does that affect handling? The component weighs 0.1 kg, which makes handling and replacement rapid and ergonomically favourable in repetitive setup tasks. Who manufactures this mounting plate? This mounting plate is produced by Teknik Makina and supplied under SKU TA014-1TM for clear identification in procurement. Can this plate be used as a direct replacement in existing toolholders? Where holders accept the DNMG 15 interface, the plate functions as a compact support element; verification against the specific holder geometry is recommended before replacement. How should the plate be referenced when ordering or checking stock? Refer to SKU TA014-1TM and the designation U-plate when enquiring or placing orders to ensure accurate supply. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, workshop-ready accessory that improves repeatable measurements and integrates seamlessly with standard calipers; the lightweight design and clear compatibility make it a practical addition to precision toolsets. Order directly via Metav Werkzeuge or consult our advisors for application advice. U-plate — compact caliper accessory, compatible with 16 ER calipers (Teknik Makina) U-plate is a small, purpose-built mounting plate designed for workshop measuring setups and compatible with 16 ER calipers, providing a stable support for repeatable dimension checks. Compact U‑shaped support for measuring setups Compatible with 16 ER calipers Lightweight at 0.1 kg for easy handling Ideal for tight workshop spaces Stable mounting that improves measurement repeatability A compact mounting accessory designed to reduce handling variation and support consistent readings. The U-plate offers a simple interface for standard calipers, making it easier to achieve precision in repetitive checks. By providing a fixed reference geometry the accessory reduces the risk of lateral movement during measurement, which benefits quality control processes where small tolerances matter. The clear compatibility with 16 ER calipers ensures straightforward integration into existing inspection routines. Small footprint that speeds up workshop workflows The compact form and lightweight construction contribute to faster handling and reduced setup time on the shop floor. At 0.1 kg the support is easy to position and reconfigure, so technicians can keep inspection points close to production with minimal disruption. This space-conscious solution supports lean working practices and helps maintain throughput without sacrificing accuracy. Its unobtrusive profile means it fits on benches and portable measurement stations where space is limited. Reliable integration for trade and industrial use Built as a practical workshop accessory, the plate is suitable for routine use in trade and light industrial contexts. The straightforward design simplifies inventory and tool planning for buying departments, while the clear SKU reference TA061TM makes reordering transparent. As an accessory from Teknik Makina, the component complements precision toolsets by enabling consistent caliper positioning and repeatable measurement cycles, thereby supporting process stability in everyday operations. For tailored advice or to request TA061TM for your measurement setup, contact Metav Werkzeuge for a recommendation and delivery from Emmerich; eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 Technical data Article number: TA061TM Name: U-plate Manufacturer: Teknik Makina Suitable for calipers: 16 ER Weight: 0.1 kg ECLASS: 21189290 Facts Weight: 0.1 kg ECLASS: 21189290 Versions / Features Compatible with 16 ER calipers SKU TA061TM Brand: Teknik Makina FAQ What is the primary purpose of this accessory? The plate is a compact mounting accessory that supports repeatable caliper measurements by providing a stable, U-shaped reference for dimension checks. Which calipers are compatible with the plate? Compatibility is specified for 16 ER calipers; the accessory is designed to interface with these standard models for reliable positioning. Is the plate suitable for mobile inspection setups? Yes. With a weight of 0.1 kg, the plate is lightweight and suited to portable or bench-top measuring stations where frequent repositioning is required. Can the plate be identified for reordering? Yes. The item is listed under SKU TA061TM, which can be used for straightforward reordering and inventory management. Who manufactures this accessory? This component is supplied by Teknik Makina and intended as a practical workshop accessory for trade and light industrial inspection tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

A compact U plate for DNMG 15 indexable inserts provides stable seating and a light replacement part (0.1 kg), supporting consistent turning performance and long service intervals; order the part via Metav Werkzeuge or consult the in-house advisors for specification checks. U plate for DNMG 15 indexable inserts by Teknik Makina — lightweight, precise seating U plate for secure seating of DNMG 15 indexable inserts in turning holders, suitable for routine workshop and industrial applications Compatible with DNMG 15 inserts Lightweight at 0.1 kg Robust seating for precise machining Long service life and reliable fit Secure seating for consistent turning quality The U plate is engineered to provide stable seating for DNMG 15 indexable inserts, reducing micro-movements that can affect surface finish and dimensional consistency. By ensuring a repeatable and accurate insert position, the carrier contributes to shorter set-up times and fewer rejects. The design focuses on mechanical reliability rather than decorative elements, so the key outcome is predictable machining performance and minimal adjustment during tool changes. Compact, low-mass design for efficient tool handling A low mass of 0.1 kg makes this component easy to handle and replaces with minimal disturbance to the tool assembly's balance. The compact footprint supports quick exchange of cutting edges in production environments where uptime matters. Lightweight components simplify manual changes and can reduce strain on clamping systems, which in turn supports steady tool behaviour and consistent cutting conditions across shifts. Durable construction for workshop continuity Specified as an accessory for indexable inserts, the plate is intended to assist in delivering long service life and dependable seating over repeated cycles. Reliable seating reduces the frequency of re-adjustments and supports predictable tool life for DNMG 15 inserts. For procurement and inventory planning, the component is a straightforward spare part that helps maintain productive turning operations and supports continuous output in small and medium workshops alike. For reliable spare-part supply and fast technical clarification from Metav Werkzeuge in Emmerich, request a detailed specification or a quote via info@metav-werkzeuge.com or call +49 2822 7131930 to confirm fitment and availability Technical Data Article number: TA014TM Manufacturer: Teknik Makina Facts Weight: 0.1 kg eClass: 21189290 UID: TA014TM Special features Compatible with DNMG 15 indexable inserts Designed for precise seating and consistent machining Compact format for easy exchange and minimal balance impact FAQ Is this plate suitable for DNMG 15 inserts? The U plate from Teknik Makina is specified for DNMG 15 indexable inserts and is intended to provide accurate seating for that insert designation (SKU TA014TM). How heavy is the component and what does that mean for handling? The plate weighs 0.1 kg, which keeps handling simple and reduces impact on tool balance during manual exchange operations. Can the plate extend insert life by improving seating stability? Improved seating reduces micro-movement and can contribute to more consistent cutting conditions; the U plate is designed to support reliable positioning of DNMG 15 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, workshop-ready caliper accessory that combines precise compatibility with lightweight handling — ideal for routine measuring setups. The plate fits TPKN 16 calipers, weighs just 0.1 kg and can be ordered via Metav Werkzeuge or discussed with their consultants for specification checks. U plate — caliper accessory compatible with TPKN 16 (Teknik Makina) The U plate is a compact caliper accessory intended to interface with TPKN 16 calipers, providing a stable contact point for repetitive measuring tasks in small workshops and inspection benches. Compatible with TPKN 16 calipers Lightweight: 0.1 kg Compact design for tight setups Reliable fit for existing measuring systems The accessory delivers a predictable mechanical interface for the specified caliper model, ensuring straightforward integration into established measuring routines. Designed as an attachment for the TPKN 16 caliper family, the component reduces setup variability by providing a consistent contact geometry. This focus on compatibility helps to shorten inspection preparation and supports repeatable measurement sequences in production environments where traceability of results matters. Space-efficient and easy to handle on the workbench With a low mass of 0.1 kg, the unit minimises added load on holders and carriers, making it suitable for compact benches and portable measurement stations. Its small footprint allows close placement to parts under test without obstructing workflow, supporting faster handling and reduced repositioning time. For workshops seeking compact solutions, the accessory contributes to a tidier measuring area while maintaining the mechanical stability required for reliable comparative checks. Procurement and technical identification for ordering The accessory is supplied by Teknik Makina under the SKU TA010TM and is identified by eClass code 21189290, which simplifies parts lists and procurement workflows. Compatibility with TPKN 16 calipers is the defining selection criterion; compatibility information should be verified against existing instruments before purchase. The clear identification data supports integration into purchasing systems and inventory, reducing the risk of ordering mismatched items. For ordering or specification advice on the Teknik Makina U plate (SKU TA010TM), contact Metav Werkzeuge in Emmerich for direct assistance and data confirmation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TA010TM Manufacturer: Teknik Makina Suitable for: TPKN 16 Facts Weight: 0.1 kg eClass: 21189290 Special features Caliper accessory for repeatable contact Compact form factor for workshop use FAQ What calipers is this plate compatible with? The U plate is compatible with TPKN 16 calipers and is specified to interface mechanically with that model family. How heavy is the accessory and how does that affect handling? Weighing 0.1 kg, the TA010TM is lightweight and easy to manoeuvre on a bench without significantly loading fixtures or holders. How is the product identified for procurement? The accessory is supplied by Teknik Makina under SKU TA010TM and eClass code 21189290 for straightforward ordering and inventory management. Is the plate suitable for compact workspaces? Yes—the compact design makes the accessory suitable for tight setups and portable measurement stations where space is limited. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compact compatibility and reliable build to integrate the component into existing turning and milling setups. With clear compatibility for WNMG 06 inserts and a lightweight design of 0.1 kg, this part supports stable mounting and straightforward stock management — order directly via Metav Werkzeuge or consult the Metav team for specification advice. U-plate TA021TM — Compact U-plate compatible with WNMG 06 (Teknik Makina) A compact U-plate designed for secure mounting of WNMG 06 indexable insert assemblies, suited to workshop and CNC tool-holding applications. Compact U-profile for tight spaces Compatible with WNMG 06 inserts Lightweight at 0.1 kg Precision production by Teknik Makina Seamless tool integration for faster setup times The compact profile ensures efficient placement in constrained toolholders and adapters, delivering clear compatibility with the common WNMG 06 insert family. This reduces the need for customised shims or adapters and streamlines changeovers. By specifying a component that matches industry-standard inserts, the assembly process becomes more predictable and measurable, improving setup repeatability and lowering the likelihood of downtime caused by misalignment. The emphasis is on measurable benefits: consistent interfacing, reduced preparation time and easier inventory handling. Stable performance with a lightweight design A low mass of 0.1 kg contributes to simpler handling without compromising positional stability when correctly mounted. The light weight assists in rapid fixture changes and minimises added inertia on assemblies where mass matters. Combined with precise production tolerances from Teknik Makina, the component supports stable mounting and improved repeatability across multiple tool changes. For operations where cycle consistency and predictable tool behaviour are priorities, this design element supports process reliability and helps maintain machining tolerances. Optimised for workshop efficiency and stock clarity Specifying a standardised U-profile plate simplifies procurement and warehouse management: one compact part fits established insert types, cutting the variety of bespoke solutions. The combination of cross-compatible design and recognised manufacturer origin reduces sourcing uncertainty. Metav’s positioning as a precision partner means customers gain access to centralised supply and expert clarification, helping to democratise high-precision components for small and large workshops alike. This approach supports long-term operational planning and fosters confidence in component selection. For compact, WNMG 06‑compatible mounting with proven Tek­nik Makina quality, request availability and technical details from Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: TA021TM SKU: TA021TM Manufacturer: Teknik Makina eCl@ss: 21189290 Weight: 0.1 kg Suitable for: WNMG 06 Facts Weight: 0.1 kg eCl@ss: 21189290 Special features Suitable for WNMG 06 Compact U-profile plate Lightweight design Manufacturer: Teknik Makina FAQ Is the U-plate TA021TM compatible with standard WNMG 06 inserts? Yes — the U-plate TA021TM is specified for compatibility with WNMG 06 inserts and intended for direct integration into matching tool assemblies. What is the mass of the component and how does it affect handling? The plate weighs 0.1 kg, which keeps handling simple for quick tool changes while maintaining stability once mounted. Can this plate be used in both manual and CNC setups? The U-plate is designed for general workshop and CNC tool-holding applications and functions where WNMG 06 insert compatibility is required. Who manufactures the part and where can technical details be verified? The plate is produced by Teknik Makina (TA021TM); further technical clarification can be obtained through Metav Werkzeuge’s product advisors. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact mounting solution that pairs low weight and direct compatibility with 16 IT precision calipers to streamline set-up and repeatable measurements; order the TA060TM through Metav Werkzeuge or consult the Metav team for procurement advice. U-plate TA060TM – compact mounting plate, compatible with 16 IT calipers The U-plate TA060TM is a compact mounting plate intended for precision caliper use in workshop and metrology contexts, designed to facilitate stable positioning of measuring instruments. Lightweight 0.1 kg for easy handling Compatible with 16 IT precision calipers Compact mounting plate for workshop metrology Predictable alignment for repeatable measurements The compact U-plate delivers a straightforward means of stabilising a precision caliper during routine checks and repetitive measurements. By combining a minimal mass of 0.1 kg with a simple mounting geometry, the plate reduces unwanted movement and helps secure a consistent reference position for the measuring tool. This stability is particularly useful when taking comparative measurements or when an operator needs to maintain a fixed datum while inspecting multiple workpieces, thus improving throughput without adding complex fixtures. Streamlined integration into everyday workshop processes Designed with workshop efficiency in mind, the plate’s compatibility with 16 IT calipers minimises set-up time and tool changes. The lightweight nature of the component makes handling and repositioning quicker, which supports faster inspection cycles and reduces operator fatigue during repetitive tasks. Where speed and reliability are essential, the U-plate provides a low-friction way to integrate a caliper into a measurement routine, supporting smoother workflows and fewer interruptions to production or inspection lines. Clear sourcing and traceability for procurement Supplied under the SKU TA060TM by Teknik Makina, the plate is intended as a straightforward accessory for precision measurement equipment. Specifying the SKU in procurement documentation simplifies reorders and ensures correct compatibility with existing calipers. Sourcing via Metav Werkzeuge brings additional assurance through a European supply point that acts as a quality filter and logistics hub, which helps maintain consistent availability and simplifies stock management for maintenance and inspection departments. For secure procurement and compatibility confirmation of the TA060TM U-plate from Teknik Makina, contact Metav Werkzeuge for tailored ordering and advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TA060TM Name: U-Platte Manufacturer: Teknik Makina ECLASS: 21189290 Weight: 0.1 kg Facts Weight: 0.1 kg ECLASS: 21189290 SKU: TA060TM Special features Compatible with 16 IT precision calipers Compact U-plate format for mounting and stabilisation FAQ What calipers are compatible with this mounting plate? The U-plate TA060TM is compatible with 16 IT precision calipers and designed to interface with that size/type for stable measurement set-ups. How much does the U-plate weigh and what does that mean for handling? The U-plate TA060TM weighs 0.1 kg, which makes it easy to handle and reposition during routine inspection tasks without adding significant bulk to the measurement station. Who manufactures the TA060TM and how is it identified for reorders? The TA060TM is supplied by Teknik Makina and can be reordered using the SKU TA060TM to ensure the correct mounting plate is obtained. Is the U-plate suitable for both production and laboratory inspection use? Yes, the U-plate TA060TM is intended as a compact stabilising accessory suitable for workshop and metrology environments where repeatable positioning of a precision caliper is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precise fit for SNMG 12 indexable inserts and the lightweight design that keeps toolholder load to a minimum; combine these attributes with reliable supply from Metav Werkzeuge for smooth integration into existing tooling. Order the part or consult Metav Werkzeuge for specification support. U-plate (compatible with SNMG 12) by Teknik Makina — compact, precise A versatile U-plate by Teknik Makina designed to accept SNMG 12 indexable inserts, suitable for integration into machining setups where a compact, predictable interface is required Compatible with SNMG 12 inserts Lightweight at 0.1 kg for minimal load Tekniк Makina manufacturing quality Secure compatibility with common indexable inserts for predictable set-up times The U-plate (TA050TM) provides a clear mechanical interface for SNMG 12 indexable inserts, offering a precision fit that reduces variability during tool setup. In practical terms, a dedicated mating surface for a defined insert geometry speeds repeatable installation and decreases downtime for retooling. For engineers and buyers, this means fewer adjustments on the machine, shortened set-up sequences and a reduced risk of misalignment affecting part quality. The component is intended as a simple, reliable element in a broader clamping and turning system rather than a stand-alone tool. Minimal mass for lower centrifugal and handling impact in machining environments Weighing just 0.1 kg, this plate is deliberately light to keep rotating assemblies balanced and to limit additional inertia where small mass changes matter. Lower mass contributes to reduced load on the toolholder and spindle, which can help maintain surface finish and dimensional stability in sensitive operations. The compact footprint and light weight also make manual handling and fixture changes quicker and less strenuous, supporting efficient workshop workflows without altering established machining parameters. Clear sourcing and traceability for dependable workshop supply Sourced from Teknik Makina and listed under SKU TA050TM, the plate is delivered with clear identification for inventory and quality tracking. Metav Werkzeuge acts as the European supply point, offering reliable availability and documentation that supports procurement processes. For procurement and quality assurance teams, the straightforward labelling and manufacturer link simplify stock control and conformity checks, helping to ensure consistent toolroom standards and uninterrupted production runs. Contact Metav Werkzeuge for precise product matching and delivery from Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the Teknik Makina U-plate compatible with SNMG 12 Technical data Article number: TA050TM UID: TA050TM Manufacturer: Teknik Makina Measurements Weight: 0.1 kg eClass: 21189290 Compatibility and features Suitable for: SNMG 12 SKU: TA050TM Manufacturer name: Teknik Makina FAQ Which insert type is this plate designed for? The U-plate is designed for use with SNMG 12 indexable inserts and provides a matching interface to ensure a secure seating of that insert geometry. What is the weight of the component and why does it matter? The component weighs 0.1 kg, which helps to limit additional inertia on the toolholder and supports easier handling during fixture changes. Is the U-plate traceable to a manufacturer? Yes, the plate is produced by Teknik Makina and listed under SKU TA050TM, enabling straightforward traceability for stock and quality procedures. Can this plate be used to reduce setup time in production? A dedicated plate for SNMG 12 inserts provides a consistent mounting interface, which contributes to shorter retooling and alignment times in repetitive production tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the compact, SNMG 19-compatible design and lightweight 0.1 kg construction for efficient set-up and reliable positioning. Order the U-plate directly via Metav Werkzeuge or consult our specialists for integration advice. U-plate — compact mounting plate, compatible with SNMG 19, by Teknik Makina The U-plate provides a compact mounting solution for indexable insert toolholders and small turning fixtures in workshop and CNC environments. Compact U-plate for indexable insert systems Compatible with SNMG 19 inserts Lightweight at 0.1 kg for easy handling Manufactured by Teknik Makina Faster set-up through precise compatibility The U-plate is designed for direct compatibility with SNMG 19 indexable inserts, which simplifies tooling choices and reduces alignment time. By offering exact seating geometry and repeatable locating features, the plate supports consistent precision across serial production runs. The compact format shortens tool-change procedures and helps maintain cutting accuracy without complex adjustments, delivering measurable process stability in turning operations. Practical benefits for workshop efficiency Constructed to be lightweight at 0.1 kg, this mounting plate reduces handling effort during tool changes and minimises inertia on small tool assemblies. The product, identified as TA051TM, integrates smoothly into existing tool inventories and helps standardise setups when SNMG-type inserts are used. The simplicity of the solution translates into less downtime for set-up and inspection, contributing to a leaner production flow and predictable machining outcomes. Sourcing and supply that fit the production chain As a standardised component from Teknik Makina, the plate supports streamlined procurement and inventory planning for maintenance and toolrooms. Clear product identification allows rapid reordering and stock checks, while a concise specification list aids compatibility verification across toolholders and adaptors. The focus on repeatable performance and compact design makes this plate a practical choice for workshops seeking reliable, easy-to-manage tooling components. For procurement enquiries, stock verification or technical clarification on the Teknik Makina U-plate (TA051TM), contact Metav Werkzeuge for reliable supply and professional advice. Technical data SKU: TA051TM Name: U-plate Manufacturer: Teknik Makina Core data Weight: 0.1 kg eClass: 21189290 Special features Suitable for SNMG 19 Compact mounting plate design FAQ What insert types is this mounting plate compatible with? The U-plate is compatible with SNMG 19 indexable inserts and is intended for use where that insert form is specified; the product is listed as TA051TM by Teknik Makina. Can the U-plate be used in small CNC turning applications? Yes, the plate’s compact format and low weight make it suitable for small turning and workshop CNC applications where SNMG-compatible insert seating is required. How does the U-plate improve set-up time? By providing a standardised seating for SNMG 19 inserts, the U-plate reduces alignment and adjustment time, helping to speed up tool changes and maintain consistent positioning. Is the U-plate identified for reordering and inventory control? The component is identified as TA051TM and supplied by Teknik Makina, which simplifies reordering and inventory management for maintenance and toolroom staff. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact mounting plate that ensures quick, repeatable positioning and is compatible with SNMG 25 tooling; its lightweight construction streamlines handling and set‑up. Order the component directly via Metav Werkzeuge or consult the Metav team for compatibility advice. U-Plate TA053TM — compact mounting plate for SNMG 25, Teknik Makina The U-Plate by Teknik Makina is a compact mounting plate designed to provide secure, repeatable positioning for SNMG 25 tooling in workshop fixtures and small production cells Compact mounting plate for inserts Compatible with SNMG 25 tooling Very low weight 0.1 kg Precise alignment for fixture set‑ups Faster set-up through precise compatibility The mounting plate is engineered for straightforward integration with SNMG 25 tooling, reducing alignment effort during changeovers. By matching the indexing and seat geometry of the insert family, the plate supports faster clamping cycles and lowers downtime. This rational design improves process efficiency and supports steady production throughput without complex adjustments. Easier handling thanks to very low weight At only 0.1 kg, the component enables quick manual positioning and easier handling during fixture assembly. The lightweight profile reduces operator fatigue when mounting or removing plates and supports safe, ergonomic workflows in busy assembly areas. Fewer handling constraints mean faster fixture changes and a smoother preparation phase for machining operations. Consistent positioning for reliable results The plate promotes precision alignment and repeatability in repetitive setups, which helps to stabilise machining outcomes and reduce rework. With a focus on mechanical fit rather than electronics, the design gives a direct, verifiable basis for quality control and predictable performance in the production environment, enhancing part consistency over time. Practical choice for workshops and small plants As a compact solution from Teknik Makina, the plate fits into mixed workshop environments where flexibility and quick adaptation matter. Combined with Metav Werkzeuge’s supply chain and advisory services, the component becomes part of a dependable workflow: straightforward stock availability, clear product data and practical assistance for integration into existing jigs and fixtures. Contact Metav Werkzeuge for procurement and technical guidance on the Teknik Makina U-Plate TA053TM; the Metav team in Emmerich can confirm compatibility with SNMG 25 tooling and arrange delivery or further specification details. Technical data Article number: TA053TM Product name: U-plate Manufacturer: Teknik Makina ECLASS: 21189290 Facts Weight: 0.1 kg Compatibility: SNMG 25 Special features Compact design Lightweight handling Precise alignment for fixture set‑ups FAQ What tooling is the plate compatible with? The U-Plate TA053TM is compatible with SNMG 25 tooling and is intended for use where that insert family is specified. Is the plate suitable for repetitive fixture set-ups? Yes, the plate supports consistent positioning and improved repeatability in repeated fixture assemblies, helping to reduce set‑up variation. How does the low weight benefit workshop workflows? The 0.1 kg mass makes manual handling and rapid changeovers easier, reducing operator strain and accelerating set‑up times in busy workshops. Can Metav Werkzeuge advise on integration into existing fixtures? Metav Werkzeuge provides procurement and advisory services to assist with compatibility checks and practical integration of the U-Plate TA053TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com