Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a compact tool holder that combines a secure M10 screw-in connection with a 20 mm nominal diameter and compatibility for APMT 0903 indexable inserts to reduce set-up time and simplify inventory. Order the screw-in cutter directly via Metav Werkzeuge or ask the consultants for further advice. Screw-in cutter VT225TM – M10 thread, 20 mm diameter (Teknik Cutting Tools) The Screw-in cutter VT225TM is a compact tool holder for APMT 0903 indexable inserts, designed to provide a secure M10 mounting and a 20 mm nominal diameter for milling operations using standard triangular inserts 20 mm nominal diameter M10 screw-in thread Compatible with APMT 0903 inserts Three cutting edges, 18 mm cutting height Secure clamping and quick insert changes for continuous production The VT225TM combines a robust M10 screw-in interface with a dedicated Torx M2.5x5.5 clamping screw and a T7 key size to ensure reliable seating of APMT 0903 indexable inserts. This arrangement stabilises the insert during cutting and simplifies replacement: the indexable insert can be rotated or exchanged without regrinding, which shortens maintenance intervals and reduces machine downtime. The restrained weight of 0.071 kg supports rapid tool changes and minimal spindle imbalance. Consistent cutting performance and improved surface quality A nominal diameter of 20 mm, a 15° cutting angle and three cutting edges deliver predictable chip formation and balanced cutting forces. The 18 mm cutting height gives adequate support for APMT 0903 inserts while maintaining a low radial overhang, which benefits dimensional stability. Explaining briefly: indexable inserts are replaceable cutting tips fixed to the tool body, enabling repeatable geometry and constant edge condition. This helps to maintain process consistency across serial production runs. Compact geometry that suits workshop inventories and flexible setups With an overall length of 48 mm and a thread engagement height of 30 mm, the cutter offers a compact profile that suits tight toolposts and modular toolholders. Compatibility with Korloy-manufactured APMT 0903 inserts reduces the number of stocked insert types needed for mixed-machine shops. Built for straightforward handling, the tool holder's compact design supports ergonomic assembly and efficient storage, aligning with Metav's focus on accessible precision and dependable supply from Emmerich. For purchasing advice or technical clarification on the Teknik Cutting Tools screw-in cutter VT225TM, please contact Metav Werkzeuge in Emmerich — technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: VT225TM Manufacturer: Teknik Makina Product: Screw-in cutter for APMT 0903 indexable inserts Compatible inserts: APMT 0903 (Korloy) Key dimensions Diameter: 20 mm Thread: M10 Cutting height: 18 mm Thread height: 30 mm Number of cutting edges: 3 Overall length: 48 mm Weight: 0.071 kg Cutting angle: 15° Special features Torx screw M2.5x5.5 Torx key size T7 Suitability: for APMT 0903 indexable inserts ECLASS: 21180806 ETIM: EC011860 FAQ Which indexable inserts fit this cutter? The VT225TM is designed for APMT 0903 indexable inserts; compatibility with Korloy-manufactured APMT 0903 inserts is specified for the Teknik Cutting Tools screw-in cutter. What are the nominal diameter and thread form? The cutter has a nominal diameter of 20 mm and an M10 screw-in thread, as listed for the VT225TM tool holder. How many cutting edges does the tool accept and what is the cutting height? The tool body accommodates three cutting edges with a cutting height of 18 mm for each installed APMT 0903 insert. Which fastening hardware is used for insert clamping? Clamping is effected with a Torx M2.5x5.5 screw; a T7 Torx key is the recommended drive for secure tightening of the VT225TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise mounting, internal coolant and compact 20 mm diameter for consistent machining results; order the screw-in milling cutter directly via Metav Werkzeuge or consult our specialists for application advice. Screw-in milling cutter VT098-1TM – 20 mm diameter, internal coolant (Teknik Makina) A screw-in milling cutter VT098-1TM designed for use with RDMT 1003 indexable inserts, offering compact mounting and integrated coolant for stable material removal in workshop and small-batch production 20 mm diameter for compact milling heads Internal coolant for extended tool life M10 screw-in mount for secure fixing Compatible with RDMT 1003 indexable inserts Boosted productivity through targeted cooling and compact design The combination of a 20 mm cutter body with internal coolant focuses lubricant and coolant directly at the cutting zone, reducing temperatures and improving chip evacuation. This targeted cooling helps maintain cutting edge stability, which in turn lowers the frequency of tool changes and minimises unplanned downtime. The compact form factor supports tight setups and close-tolerance operations without compromising rigidity, delivering a tangible increase in machining throughput for demanding small-batch production runs. Secure clamping and straightforward insert handling for quicker set-ups A robust M10 screw-in mount and a lightweight construction ensure rapid, repeatable mounting while maintaining concentricity during high-speed milling. The tool accepts RDMT 1003 indexable inserts, allowing fast insert changes with the specified Torx fixing (T15) and screw M3,5x7, which simplifies maintenance procedures. Reduced set-up time and the ability to change cutting edges quickly translate into improved shop-floor efficiency and a lower overall cost per part in repetitive machining tasks. Designed for reliable performance and easy integration With a 55 mm overall length, two cutting edges and a compact thread height, this milling head is engineered for stable performance in confined tool magazines and multi-spindle arrangements. The internal cooling channel keeps the interface between insert and workpiece consistently lubricated, supporting predictable surface finish and dimensional repeatability. For production managers seeking a conservative, high-availability solution, the unit’s light weight and proven geometry help maintain cycle consistency across varying workpiece materials and part geometries. For tailored advice on integrating the Teknik Makina screw-in milling cutter into existing toolholders or for procurement via Metav Werkzeuge, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert support Technical data Article number: VT098-1TM Brand: Teknik Makina Product type: Screw-in milling cutter eClass: 21180806 Core dimensions Diameter: 20 mm Overall length: 55 mm Weight: 0.087 kg Cutting-edge height: 35 mm Thread height: 20 mm Number of cutting edges: 2 Special features Internal coolant: yes Thread: M10 Compatible inserts: RDMT 1003 Torx key: T15 Torx screw: M3,5x7 FAQ Which inserts fit this milling head? The milling head accepts RDMT 1003 indexable inserts; the geometry is optimised for that insert family to ensure secure seating and reliable cutting performance. Is the tool equipped for through-coolant supply? Yes, the product features internal coolant, which delivers lubricant directly to the cutting zone for improved tool life and surface quality. What is the mounting thread for the cutter? The cutter is mounted with an M10 screw-in thread designed for secure, repeatable fixation in compatible holders. How many cutting edges does the cutter have? The tool is supplied with 2 cutting edges, balancing material removal rate and surface finish for small to medium-sized operations. What is the article number or SKU for ordering? The SKU for this item is VT098-1TM, which should be quoted when enquiring or ordering. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precision-engineered screw-in cutter with Ø 20 mm and M10 thread that accepts RDMT 1003 indexable inserts; reliable clamping and a lightweight design help keep tool changeovers short and spindle load low. Order the tool directly via Metav Werkzeuge or ask the consultants for compatibility details. Screw-in cutter VT098TM — Ø 20 mm, M10 thread (Teknik Makina) The screw-in cutter VT098TM is a compact milling head designed for systems using RDMT 1003 indexable inserts, offering secure clamping and straightforward integration into standard toolholders. Compatible with RDMT 1003 inserts Ø 20 mm with M10 thread Two cutting edges for stable cuts Secure clamping with M3.5 locking screw High process reliability through standardised dimensions The compact geometry of this milling head ensures consistent performance in repeated operations. With a Ø 20 mm body and an M10 thread, the tool provides a predictable interface for the toolholder, which minimises set-up variation and shortens machine downtime. Designed for insert systems, the head accommodates RDMT 1003 indexable inserts and delivers a stable engagement thanks to its two cutting edges, supporting steady chip evacuation and repeatable surface results. Rapid insert changes and robust clamping reduce downtime Maintenance routines are simplified by the straightforward fastenings: a locking screw M3.5 and a Torx screw M3.5x8.5 secure the insert reliably, while the required T15 Torx key enables quick, safe access. This fastening concept reduces changeover time and lowers the risk of incorrect clamping; the combination of positive seating and screw retention gives a dependable connection between the insert and cutter body, which is particularly useful in production environments where cycle time and process stability are critical. Compact, lightweight design for stable toolpaths At a total length of 55 mm and a mass of just 0.087 kg, the milling head offers low overhang and reduced dynamic loads on the spindle, improving rigidity during transverse cuts. The 35 mm cutting height and 20 mm thread engagement are balanced to give sufficient cutting depth while maintaining the mechanical stiffness required for precise operations. The two cutting edges promote even load distribution and predictable wear, making this head a suitable choice for workshops seeking consistent finishing and dependable repeatability. Contact Metav Werkzeuge for tailored technical advice and to order the Teknik Makina screw-in cutter VT098TM for RDMT 1003 indexable inserts — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: VT098TM Designation: Screw-in cutter for RDMT 1003 indexable inserts Manufacturer: Teknik Makina eClass: 21180806 ETIM: EC011860 Facts Diameter: 20 mm Thread: M10 Total length: 55 mm Cutting edges: 2 Thread height: 20 mm Cutting height: 35 mm Weight: 0.087 kg Locking screw: M3,5 Torx screw: M3,5x8,5 Torx key: T15 Special features Compatible with RDMT 1003 indexable inserts Files: 62de7e4a33927e49dbf32744, 62de7ee2bd24461b3d5f7a69 Lightweight design for low spindle load Compact length for short overhangs FAQ Which insert type fits this cutter? The cutter is designed for RDMT 1003 indexable inserts; the Tek­ni­k Ma­ki­na screw-in cutter (SKU VT098TM) accepts that insert form directly. What is the thread and interface specification? The VT098TM features an M10 thread interface and standardised dimensions that ensure proper seating in M10 toolholders. How many cutting edges does the tool provide? This screw-in cutter from Teknik Makina is equipped with 2 cutting edges, offering balanced load distribution and steady cutting performance. Which fastening hardware is required for insert changes? Insert clamping is secured with a locking screw M3.5 and a Torx screw M3.5x8.5; a T15 Torx key is specified for safe, quick changes. What are the overall length and weight of the milling head? The VT098TM has a total length of 55 mm and a weight of 0.087 kg, characteristics that contribute to reduced overhang and improved rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable left‑hand turning performance with secure clamping and compact dimensions: the combination of a 20 × 20 mm shank, compatibility with DCMT 0702 indexable inserts and a robust Torx clamping screw ensures repeatable cuts and low setup times. Order the SDJC clamping holder directly via Metav Werkzeuge or ask our consultants for advice. Teknik Makina SDJCL 2020 clamping holder — SDJC for DCMT indexable inserts, left‑hand, 20×20 mm The SDJCL 2020 clamping holder is a left‑hand insert holder designed for external turning with DCMT 0702 indexable inserts, offering compact geometry for space‑saving toolpost setups. Compatible with DCMT 0702 inserts 20 × 20 mm square shank Left‑hand turning, 93° cutting angle Secure Torx M2.5x5.5 clamping screw Consistent turning accuracy from a compact toolholder A compact, square 20 × 20 mm shank combined with a cutting height of 20 mm and a cutting head width of 25 mm delivers a stiff setup that reduces vibration and improves surface finish. The 93° cutting angle positions the insert for stable chip formation during external turning, which helps to maintain dimensional accuracy across repeated passes. For workshop planners and production engineers, the main benefit is predictable performance: less rework and more consistent cycle times when swapping between turning operations. Fast insert changes and secure clamping reduce downtime The clamping system uses a Torx M2.5x5.5 screw tightened with a T8 key, enabling quick, repeatable insert clamping without specialised tools. The ISO designation SDJCL 2020 identifies the holder size and guarantees compatibility with common DCMT inserts, simplifying inventory management. Faster insert swaps and a robust clamping interface translate directly into reduced machine downtime and straightforward maintenance, supporting efficient shopfloor workflows. Designed for practical workshop integration With a total length of 125 mm and a nominal mass of 0.4 kg, this toolholder balances reach and rigidity for medium‑duty external turning tasks. The left‑hand orientation makes it suitable for specific lathe set‑ups where tool direction is critical; matching toolpath programmes to the holder orientation avoids unexpected tool interference. The holder’s compact footprint eases installation in constrained toolposts and supports modular tooling strategies without sacrificing stability. For reliable left‑hand turning with DCMT 0702 inserts choose the Teknik Makina SDJCL 2020 — contact Metav Werkzeuge for delivery and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D361-1TM Manufacturer: Teknik Makina Type designation: SDJCL 2020 Product name: SDJC for DCMT indexable inserts Facts Shank width: 20 mm Shank height: 20 mm Cutting head width: 25 mm Cutting height: 20 mm Total length: 125 mm Total height: 20 mm Weight: 0.4 kg Cutting angle: 93° Special features Compatible inserts: DCMT 0702 Cutting direction: left Clamping screw: M2.5x5.5 Torx Torx key size: T8 Shank designation: K07 FAQ What insert types fit this holder? The holder accepts DCMT 0702 indexable inserts; the SDJCL 2020 designation confirms mechanical compatibility with standard DCMT inserts. Is the clamping screw a common size? Yes, the clamping screw is M2.5x5.5 and is operated with a T8 Torx key for consistent torque and quick changes. What does the 93° cutting angle mean in practice? A 93° cutting angle positions the insert slightly past perpendicular, improving clearance and chip flow for many external turning tasks while maintaining tool strength. Can this holder be mounted in a compact toolpost? The 20 × 20 mm square shank and 125 mm total length make the holder suitable for compact toolposts where space is limited yet rigidity is required. Is this a left‑hand or right‑hand holder? This is a left‑hand clamping holder designed for left‑hand turning operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, left‑hand clamping toolholder that combines precise compatibility with DCMT 11T3 indexable inserts, a 93° cutting approach and a slim 20 mm shank for stable turning. Order directly via Metav Werkzeuge or consult the team for tailored application advice. SDJCL 2020 clamping toolholder by Teknik Makina — left‑hand, for DCMT 11T3 inserts, 125 mm overall length The SDJCL 2020 clamping toolholder is a left‑hand turning holder engineered for use with DCMT 11T3 indexable inserts, providing a compact 125 mm profile for space‑saving external turning setups. For DCMT 11T3 indexable inserts Left‑hand cutting orientation 125 mm overall length Robust 20 mm shank height Maximum rigidity with a compact profile The holder is designed to deliver rigidity in a compact form: an overall length of 125 mm and a 20 mm shank height combine to reduce overhang while maintaining stability during external turning. A cutting angle of 93° helps position the insert for predictable engagement, which reduces vibration and supports consistent surface finish. The holder’s modest mass (approximately 0.404 kg) balances inertial damping with ease of handling, making it suitable for short‑run changeovers and repetitive production tasks where tool stability is critical. Quick, repeatable insert clamping for efficient production Clamping systems determine how reliably an insert holds its geometry under load. This toolholder is specified for DCMT 11T3 indexable inserts and the ISO designation SDJCL 2020 identifies the shank form and mounting interface. The design emphasises repeatable seating and secure fixing, which minimises index‑to‑index variation and accelerates tool changes. Reduced downtime and fewer adjustments translate into tangible productivity benefits: more consistent cycle times and less part rework in series turning. Predictable cutting geometry for consistent results Using a standard insert size like DCMT 11T3 allows for predictable approach and chip control across different machines and operators. The toolholder’s head width (25 mm) and cutting height (25 mm) align the insert at the intended datum height, ensuring the correct engagement angle without additional shims. For engineers and machinists who depend on repeatable set‑ups, this stability simplifies process planning and supports consistent part tolerances over extended runs. Built for workshop reliability and straightforward integration The clamping toolholder’s ISO coding (SDJCL 2020) and its direct compatibility with common indexable inserts make it easy to integrate into existing tool stations and turret configurations. The left‑hand orientation suits operations where tool path and lathe set‑ups require a reversed approach. Combined with Metav’s logistical and quality oversight, the holder is presented as a dependable component for both independent workshops and production departments seeking a dependable supply chain and consistent product quality. For secure delivery and application guidance, contact Metav Werkzeuge — the partner for democratised precision and reliable European supply: eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific turning tasks and machine interfaces. Technical data Article number: D366TM Manufacturer: Teknik Makina ISO designation: SDJCL 2020 Compatible inserts: DCMT 11T3 Cutting direction: left SKU: D366TM Facts Overall length: 125 mm Shank height: 20 mm Shank width: 20 mm Head width: 25 mm Cutting height: 25 mm Cutting angle: 93° Weight: 0.404 kg Special features SDJC design for DCMT indexable inserts Left‑hand cutting orientation Compact, space‑saving profile Repeatable clamping interface Teknik Makina product FAQ What inserts fit this holder? The holder is compatible with DCMT 11T3 indexable inserts; the SDJCL 2020 interface secures the DCMT geometry for predictable cutting performance. Is this holder suitable for right‑hand turning? This specific toolholder is manufactured for left‑hand cutting orientation; a right‑hand version is required for conventional right‑hand turning. What is the overall length and shank size? The toolholder has an overall length of 125 mm and a shank height/width of 20 mm, balancing reach with rigidity for external turning. How does the clamping system affect productivity? The clamping interface on the SDJCL 2020 minimises index‑to‑index variation, enabling faster insert changes and more consistent cycle times when used with DCMT 11T3 inserts. Can the holder be integrated into existing turrets? Yes — the ISO designation and standard shank dimensions facilitate integration into common turret mounts and lathe tool stations provided the turret accommodates a 20 mm shank. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine the 62.5° cutting angle and the SDNCN 2020 clamping concept for consistent turning results; compatible with DC-- 11T3 indexable inserts and offering a 125 mm overall length for secure reach. Order the tool directly via Metav Werkzeuge or ask our consultants if needed. Clamping holder SDNCN 2020 — SDNCN toolholder for DC-- 11T3 indexable inserts (Teknik Makina) Clamping holder SDNCN 2020 for external turning operations, designed to accept DC-- 11T3 indexable inserts and to provide a balance of reach and rigidity in precision workshops SDNCN 2020 ISO designation Compatible with DC-- 11T3 inserts 20 mm clamping height 62.5° cutting angle for precise cuts 125 mm overall length Consistent cutting performance for industrial turning The SDNCN 2020 design delivers a predictable cutting geometry thanks to its defined 62.5° cutting angle, which supports stable chip formation and consistent surface finish. As a clamping-style toolholder for indexable inserts, it removes the need for regrinding; replaced inserts restore original geometry instantly, reducing setup variation. This reliability translates directly into improved process stability on production runs, enabling higher first-pass yields and fewer in-process adjustments. Dimensions and rigidity explained for reliable setups Key dimensions influence rigidity and accessibility: a 20 mm clamping height combined with a 125 mm overall length gives a measured compromise between reach and stiffness, while the 10 mm cutting-head width and 20 mm body width concentrate mass where support is most effective. The modest mass of 0.39 kg reduces inertial load on turrets and tool posts, making the holder suitable for medium-duty turning where controlled vibration and accurate positional repeatability matter. Faster insert handling and standardised fit for workshop efficiency The SDNCN form factor is a standardised external turning interface that accepts DC-- 11T3 indexable inserts, simplifying stock management and reducing tool-change time. The holder’s K11 shank designation facilitates correct engagement with compatible tool posts and bores, while the clamping concept enables secure retention of the insert during moderate cutting forces. The resulting benefit is shorter downtime during insert changes and predictable clamp performance across batches. Where this holder adds value in daily production This toolholder suits general turning and finishing tasks in metalworking shops that rely on indexable tooling for quick turnaround. Its measured geometry supports consistent surface quality and repeatable cutting conditions, which is especially beneficial in small to medium production runs. Paired with quality inserts and stable turret setups, the holder contributes to efficient machining cycles and easier process documentation for quality control. Contact Metav Werkzeuge to discuss how the Teknik Makina SDNCN 2020 clamping holder fits specific turning tasks and to confirm current availability from Emmerich; consultants are reachable at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: D122TM Manufacturer: Teknik Makina Product name: Clamping holder SDNCN 2020 ECLASS: 21181004 Facts Clamping height: 20 mm Cutting-head width: 10 mm Width: 20 mm Cutting height: 25 mm Cutting angle: 62.5° Overall length: 125 mm Weight: 0.39 kg Special features ISO designation SDNCN 2020 Compatible inserts: DC-- 11T3 Shank designation: K11 Design for indexable inserts SDNCN for DC-- indexable inserts FAQ Which indexable inserts fit this holder? The holder is specified for DC-- 11T3 indexable inserts; the SDNCN geometry secures these inserts in the correct cutting position. What are the key dimensions affecting rigidity and reach? Primary dimensions are the 20 mm clamping height and 125 mm overall length, with a 10 mm cutting-head width and 0.39 kg mass influencing stiffness and dynamic behaviour. Is the cutting angle suitable for finishing passes? The 62.5° cutting angle provides a geometry geared towards controlled cutting forces and predictable chip flow, which supports high-quality finishing when combined with appropriate inserts and cutting parameters. How is the insert retained and changed? The SDNCN clamping concept secures the insert with a dedicated clamp geometry, enabling fast index changes and stable retention during typical turning operations. Which holder interface does this product use? The toolholder carries the K11 shank designation for mounting; matching the shank interface to the turret or tool post ensures stable seat and correct alignment. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable solution that combines proven compatibility with AXMT 0602 and APKT 0903 inserts, a robust Ø20 mm shaft and a 60 mm effective cutting length for reliable milling performance — order via Metav Werkzeuge or contact our consultants for technical advice. Shaft milling cutter S022TM — indexable inserts AXMT 0602 / APKT 0903, Ø20 mm (Teknik Makina) A Shaft milling cutter S022TM designed for indexable-insert milling with AXMT 0602 and APKT 0903 inserts, suitable for a wide range of general machining operations Compatible with AXMT 0602 & APKT 0903 inserts Ø20 mm shaft for standard toolholders 60 mm effective cutting length Secured by M2.5x5.5 Torx screw (T8) Precision and compatibility that reduce setup time The S022TM is engineered as an indexable-insert milling solution that accepts AXMT 0602 and APKT 0903 styles, simplifying inventory management by using widely available insert geometries. With a Ø20 mm shaft and a total length of 150 mm, the holder provides a compact, rigid connection to standard toolholders; the 60 mm cutting length allows extended engagement without compromising stiffness. The design utilises a Torx clamping screw M2.5x5.5 (Torx key T8) for reproducible insert retention, which contributes to consistent tool runout and predictable component quality. These objective specifications support efficient machine cycles and predictable tool-change intervals. Stable cutting performance and operational benefits Equipped with three cutting edges, the tool body balances chip load and cutting forces to enable higher feed rates in many indexable milling tasks. The combination of a short overhang and the measured mass (approx. 0.37 kg) reduces vibration potential, improving surface finish and extending insert life. The secure screw fastening and standard insert interfaces make insert replacement quick and safe, reducing downtime and logistical complexity. In practical terms, the holder's geometry and fastening method translate into fewer interruptions on the shopfloor and a more reliable production rhythm. Practical procurement and workshop integration The design focuses on maintenance friendliness and workshop compatibility: common APKT 0903 inserts (also compatible with Taegutec inserts) are easy to source, and the standard shaft size ensures broad clamping options. For purchasing and supply, Metav Werkzeuge acts as a quality filter for the European market from Emmerich, offering robust logistics and industry-grade fulfilment. As a compact, purpose-built milling holder, it supports repeatable setups and straightforward spare-part planning, helping to lower process risk and maintain throughput. Contact Metav Werkzeuge for availability and tailored technical advice on Teknik Makina's S022TM shaft milling cutter and to ensure seamless integration into existing toolsets Technical data SKU: S022TM Brand: Teknik Makina Suitable for indexable inserts: AXMT 0602, APKT 0903 Compatible insert manufacturer: Taegutec Torx screw: M2.5x5.5 Torx key: T8 Core data Shaft diameter: 20 mm Effective cutting length: 60 mm Overall length: 150 mm Number of cutting edges: 3 Weight: 0.37 kg Design & special features Indexable-insert holder configuration Secured by Torx screw for reproducible clamping Fits standard toolholders with Ø20 mm shank SKU S022TM FAQ Which insert types fit this milling holder? The S022TM accepts AXMT 0602 and APKT 0903 indexable inserts; it is also compatible with inserts from Taegutec that follow these ISO forms. How many cutting edges does the tool body provide? This milling holder is designed for three cutting edges, which helps balance chip load and supports higher productive feeds. What are the key dimensions to check before ordering? Check the Ø20 mm shaft diameter, the 60 mm effective cutting length and the overall length of 150 mm to ensure compatibility with existing toolholders. Which screw and key are used to retain the insert? The insert is secured with an M2.5x5.5 Torx screw; a T8 Torx key is required for tightening and removal. Is this tool suitable for standard toolholders? Yes — the 20 mm shank and compact overall length make the holder compatible with many standard clamping systems used in milling machines. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine robust clamping and quick insert changes with the S500TM for continuous production: the 20 mm shank and 55 mm cutting length deliver rigidity and reach, while indexable ADMT 1204 inserts reduce downtime. Order the cutter directly via Metav Werkzeuge or consult the technical team for tailored machining advice. Shank milling cutter S500TM by Teknik Makina — for ADMT 1204 indexable inserts, 20 mm shank Shank milling cutter S500TM designed for reliable indexable-insert milling in industrial applications Compatible with ADMT 1204 inserts 20 mm shank diameter 55 mm cutting length Secured by M3x7 Torx screw, T8 key Increased uptime through indexable inserts and fast changeovers The S500TM is built for production environments where tool change time directly affects output. By accepting ADMT 1204 indexable inserts, the cutter enables rapid repositioning or replacement of cutting edges without removing the holder from the spindle, reducing non-productive time. The use of replaceable inserts means less frequent full-tool replacement and a predictable cost structure per cutting edge. With 2 cutting edges and a 90° cutting angle, the system is optimised for stable material removal and consistent surface results, supporting higher throughput on batch and single-piece production alike. Rigidity and reach for consistent chip control A firm connection between toolholder and spindle improves surface finish and tool life. The 20 mm shank provides a compact, rigid interface for secure clamping, helping to reduce chatter when taking moderate depths of cut. Combined with the 55 mm cutting length, the geometry offers a good balance between working reach and stiffness for peripheral and shoulder milling tasks. The cutter’s modest mass (0.348 kg) aids spindle balance and reduces dynamic load on high-speed setups, while the M3x7 Torx fastening, used with a T8 key, ensures reliable insert retention and straightforward maintenance. Compatibility and workshop integration This tool integrates into established machining workflows: it is designed for ADMT 1204 inserts and listed as compatible with Walter insert systems, allowing straightforward stocking and replacement strategies. The indexable concept suits mixed-production shops and OEMs that require flexibility across materials and part geometries. Technical consultants can advise on optimal insert grades and cutting parameters for specific steels or aluminium alloys, helping to translate the cutter’s technical attributes into measurable productivity gains on the shop floor. For tailored cutting recommendations or delivery options for the Teknik Makina S500TM, contact Metav Werkzeuge in Emmerich for expert technical guidance and rapid supply: phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: S500TM Manufacturer: Teknik Makina Designation: Shank milling cutter for ADMT 1204 indexable inserts eClass: 21180806 ETIM: EC011860 Core specifications Shank diameter: 20 mm Cutting length (shank): 55 mm Overall length: 150 mm Diameter: 20 mm Cutting edges: 2 Cutting angle: 90° Weight: 0.348 kg Special features For indexable inserts: ADMT 1204 Compatible insert manufacturer: Walter Torx screw: M3x7 Torx key: T8 FAQ Which inserts fit this cutter? The cutter accepts ADMT 1204 indexable inserts; the S500TM is specified for these insert geometries and is compatible with Walter-manufactured inserts. How is the insert secured? Inserts on the S500TM are fastened with an M3x7 Torx screw; use a T8 key for correct tightening and replacement. What are the shank and cutting dimensions? The S500TM features a 20 mm shank diameter, a 55 mm cutting length, and an overall length of 150 mm as core dimensions. For which operations is this cutter suitable? The indexable design makes the S500TM suitable for peripheral and shoulder milling where a 90° cutting angle and replaceable edges support efficient material removal and predictable edge life. Is the tool balanced for high-speed spindles? With a compact mass of 0.348 kg and a short shank profile, the S500TM provides a balance-friendly solution for many machining setups; specific balancing requirements depend on spindle speed and machine specification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise indexable-insert milling combined with stable clamping and straightforward servicing for consistent workshop throughput; order supply and technical advice through Metav Werkzeuge for seamless integration into production. Shank milling cutter S501TM — 20 mm shank, for ADMT 1204 indexable inserts (Teknik Makina) The Shank milling cutter S501TM is a robust shank-mounted milling tool intended for operations with ADMT 1204 indexable inserts, designed to deliver repeatable chip control and fast insert changes in industrial machining environments 20 mm shank diameter For ADMT 1204 indexable inserts 60 mm effective cutting length Secured with M3x7 Torx screw (T8) High-efficiency indexable milling for predictable output The S501TM is engineered as an indexable-insert milling solution that combines replaceable cutting edges with a compact shank form. With a 20 mm shank and a 60 mm cutting length, the tool provides a predictable contact zone that supports consistent material removal rates and easier tool set-up. Using replaceable ADMT 1204 inserts reduces overall tooling cost and shortens maintenance downtime compared with solid-end alternatives; insert indexing allows the cutting edge to be renewed in seconds, maintaining process stability on repetitive runs. Secure clamping and quick insert changes for stable machining A stable clamping system reduces vibration and extends insert life. The tool uses an M3x7 Torx screw (drive size T8) to fasten the insert pocket reliably, ensuring repeatable seating and torque values across tool changes. The combination of a 20 mm shaft and a 200 mm overall length keeps the center of mass close to the spindle, enhancing rigidity during slotting or light facing. For production environments where machine time is valuable, this translates into fewer reworks and a steadier surface finish from one batch to the next. Practical versatility for common milling tasks Designed around standard ADMT 1204 geometries and approved for use with Walter inserts, the cutter is suited to general milling operations where indexable inserts are preferred: intermittent cutting, slotting and light face milling are typical applications. The two-edge configuration and 90° cutting angle deliver predictable chip evacuation and straightforward programming for CAM routines. Where operators require an uncomplicated, repeatable toolset, this type of shank-mounted cutter supports consistent cycle times and straightforward supply-chain management. Maintenance, integration and predictable cost-efficiency Replacement inserts simplify inventory control and lower the total cost of ownership when measured across lifetime cutting hours. The S501TM’s design supports rapid on-machine insert replacement, cutting non-productive time and preserving spindle availability. Combined with Metav’s supply and quality filter in Emmerich, customers benefit from a dependable sourcing route that complements in-house tool management practices and reduces the risk of mismatched specifications in serial production. For procurement or technical integration, contact Metav Werkzeuge in Emmerich for detailed advice and reliable supply — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the S501TM and its compatibility with existing tool holders Technical data Article number: S501TM Manufacturer: Teknik Makina For inserts: ADMT 1204 Compatible insert manufacturer: Walter Torx screw: M3x7 Torx key: T8 Facts Shank diameter: 20 mm Cutting diameter: 20 mm Effective cutting length: 60 mm Total length: 200 mm Number of cutting edges: 2 Weight: 0.498 kg Cutting angle: 90° Special features For ADMT 1204 indexable inserts Secured with M3x7 Torx screw Compatible with Walter inserts Brand: Teknik Makina FAQ What inserts are compatible with this cutter? The S501TM shank milling cutter accepts ADMT 1204 indexable inserts; insert geometry must match ADMT 1204 specifications for secure seating and correct cutting geometry. How is the insert fixed in the pocket? Inserts are clamped with an M3x7 Torx screw and require a T8 driver; this arrangement ensures consistent torque and repeatable seating for the S501TM. Which operations suit this shank-mounted cutter? Typical uses include slotting, light face milling and intermittent cuts where an indexable-insert approach is preferred; the two-edge layout and 90° cutting angle give predictable chip control. Is the tool suitable for production environments? Yes — the S501TM is designed for repeatable performance and quick insert replacement, making it appropriate for series production where uptime and consistent output are priorities. Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact solution that pairs reliable indexable inserts with a sturdy Ø 20 mm shank and five cutting edges for consistent machining results; order directly via Metav Werkzeuge or contact our consultants for tailored advice. Teknik Makina S761TM shaft cutter — for ADMX 0702 indexable inserts, Ø 20 mm Teknik Makina S761TM shaft cutter is designed for milling with ADMX 0702 indexable inserts, offering a compact total length and robust shank for repeatable setups in production and workshop environments. *Suitable for ADMX 0702 inserts *Ø 20 mm shank diameter *Five cutting edges for high material removal *Total length 125 mm Precise compatibility with ADMX 0702 indexable inserts for efficient production The tool is optimised for ADMX 0702 indexable inserts, giving a straightforward interface between cutter and insert that reduces set-up time and minimises downtime. Using a dedicated insert format simplifies inventory management and makes tool replacement predictable. For users migrating from different systems, the clear specification for the insert format and manufacturer compatibility ensures the machining process stays consistent and measurable. The focus is on reliable repeatability rather than experimental setups. Stable shank geometry for consistent tool life and accuracy A Ø 20 mm shank and a balanced total length of 125 mm provide dimensional stability during milling operations. The cutter’s design keeps deflection low at typical spindle speeds for indexable tooling, supporting consistent surface quality and dimensional tolerance. The 17 mm cutting length and a 90° cutting angle are suited to general facing and shoulder milling tasks, enabling controlled metal removal without unnecessary tool movement. Secure clamping and quick insert handling to lower cycle time Fast, secure clamping is achieved with a Torx M2x4.2 screw and a matching T6 key specification, enabling safe fixation of the insert and straightforward servicing at the machine. The use of a standard Torx fastening reduces the risk of incorrect torque and helps maintain insert seat integrity, which in turn extends the effective life of the indexable inserts. Fewer tool-change interruptions translate directly into higher effective machining time per shift. Practical workshop advantages and application scope Well suited to general milling operations that call for indexable-insert tooling, the cutter supports a variety of metals when matched with appropriate inserts from the specified manufacturer. The compact weight of 0.3 kg and the robust shank make it a practical choice for production lines and jobbing workshops that prioritise predictable, repeatable results. The specification encourages modular tool management and enables better planning for tool rotation and insert stock. Contact Metav Werkzeuge today to discuss application fit and secure the Teknik Makina S761TM shaft cutter for ADMX 0702 inserts; our team in Emmerich provides practical advice and fast dispatch for production-ready tooling. Technical Data SKU: S761TM Manufacturer: Teknik Makina Compatible insert: ADMX 0702 Compatible insert manufacturer: Pramet Torx screw: M2x4,2 Torx key: T6 Weight: 0.3 kg Core dimensions Shaft diameter: 20 mm Cutting length: 17 mm Diameter: 20 mm Number of cutting edges: 5 Total length: 125 mm Cutting angle: 90° Materials & features For ADMX 0702 indexable inserts Compatible with Pramet inserts Secure Torx fastening system Designed for repeatable set-ups and quick insert changes FAQ Which inserts fit this cutter? The cutter is built for ADMX 0702 indexable inserts; compatibility with Pramet inserts is specified for straightforward replacement and stock planning. What are the key dimensions to check before ordering? Important dimensions include the Ø 20 mm shank diameter, 17 mm cutting length, 125 mm total length and a 90° cutting angle to ensure correct machine and holder fit. How is the insert secured in the cutter? The insert is fastened using a Torx M2x4.2 screw; the specified drive size is T6, which helps achieve consistent clamping torque. Is the cutter balanced for higher spindle speeds? The robust shank diameter and compact total length support reduced deflection and balance appropriate for indexable-insert milling; specific balancing for high-speed applications should follow machine and spindle recommendations. Can this cutter be used for heavy stock removal? With the correct insert grade and cutting parameters, the design supports effective material removal; the five cutting edges and shank stability favour productive milling cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable solution that combines reliable insert compatibility and stable shaft geometry: the cutter’s 20 mm shaft diameter and 45 mm cutting length deliver consistent results in serial production, while straightforward clamping reduces changeover time — order via Metav Werkzeuge or consult our specialists for application advice. Schaftfräser — indexable insert milling cutter with 20 mm diameter for APKT 0903 inserts by Teknik Makina A robust milling cutter for indexable inserts, designed for face milling and shoulder operations where secure insert clamping and predictable chip control are required. 20 mm shaft diameter for stable machining Compatible with APKT 0903 indexable inserts Three cutting edges for smooth material removal Optimised compatibility for indexable inserts and applications This tool is designed specifically for APKT 0903 indexable inserts, ensuring dependable seating and predictable cutting performance when combined with compatible insert grades. The holder accepts inserts from leading manufacturers such as Walter, which permits flexible selection of coating and substrate according to workpiece requirements. By using a purpose-built insert holder rather than solid tooling, spare-part logistics are simplified and tool costs can be controlled through economical insert replacement rather than full-tool exchange. Stable geometry for repeatable cut quality and efficient chip control The cutter’s 20 mm shaft diameter and 45 mm cutting length provide a balance between rigidity and reach: the stiff shaft reduces vibration while the specified cutting length supports a variety of shoulder and face milling tasks. The tool has three cutting edges and a 90° cutting angle, which helps to produce consistent surface finish and dimensional stability on interrupted and continuous cuts. Secure clamping is achieved via an M2.5x7 Torx screw (Torx key T8), enabling quick, repeatable insert changes and minimising downtime during production shifts. Practical integration into machining workflows and maintenance With an overall length of 120 mm and a net weight of 0.278 kg, the holder is compact enough for tight setups yet long enough for standard toolholder systems. The design supports straightforward insert replacement and inspection, limiting machine idle time and facilitating lean operations on the shop floor. For production environments that prioritise predictable throughput and easy inventory management, the S206TM cutter integrates with existing insert stocks and tooling strategies while maintaining the advantages of indexable tooling. Contact Metav Werkzeuge for tailored recommendations on cutting data, insert grades and mounting options for this Teknik Makina indexable cutter — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S206TM Manufacturer: Teknik Makina Designation: Milling cutter for APKT 0903 indexable inserts Numbers / Core technical data Shaft diameter: 20 mm Cutting length: 45 mm Overall length: 120 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.278 kg Torx screw: M2.5x7 Torx key: T8 Compatible inserts: APKT 0903 Compatible insert manufacturer: Walter Design / Special features Indexable insert holder for APKT 0903 Three-flute configuration for balanced removal Secure Torx clamping system Compact 120 mm length for versatile mounting FAQ Which insert type is required for this cutter? The cutter accepts APKT 0903 indexable inserts; choosing the correct insert grade for the workpiece material is recommended for optimal wear life. Is the clamping screw a standard size and which key is needed? Clamping is via an M2.5x7 Torx screw; a T8 Torx key is used for secure tightening and repeatable insert changes. Can this holder be used with inserts from other manufacturers? Yes — the design is compatible with standard APKT 0903 geometry; inserts from Walter and other suppliers with the same geometry fit the holder. What are the main benefits of using an indexable holder over a solid cutter? Indexable holders reduce tooling costs through replaceable inserts, shorten changeover times and simplify inventory management compared with full-tool replacement. Which operations suit this tool best? The holder is suitable for face milling and shoulder milling tasks where a 20 mm shaft provides the required rigidity and the three-edge configuration delivers steady material removal. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid Ø20 mm shank, 3 cutting edges and a 30 mm cutting length for consistent milling performance; the compact 100 mm overall length keeps setups precise. Order the S032TM directly via Metav Werkzeuge or ask our consultants if needed. S032TM indexable milling cutter — for APKT 1003-1604 indexable inserts, Ø20 mm shank (Teknik Makina) S032TM is an indexable milling cutter designed to accept APKT 1003–1604 inserts and to deliver stable material removal in CNC and production milling applications Ø20 mm shank diameter for standard toolholders Compatible with APKT 1003 indexable inserts 3 cutting edges for balanced material removal 30 mm effective cutting length for deeper passes Torx screw M2.5x5.5; T8 key for secure clamping Enhanced rigidity for repeatable production results The solid Ø20 mm shank and compact 100 mm overall length reduce deflection during high-speed milling, which results in more predictable toolpaths and consistent part quality. With 3 cutting edges, the tool body balances chip load across the circumference, lowering vibration and promoting even wear across inserts. The geometry — a 90° cutting angle — supports perpendicular face milling and stable engagement, so cycle times can be kept tight without sacrificing finish quality. These mechanical properties translate directly into measurable production benefits: improved surface consistency and fewer reworks. Fast insert changes and secure clamping to cut downtime Insert retention is handled by a Torx system ( M2.5x5.5 screw) operated with a T8 key, enabling repeatable clamp torque and quick insert swaps on the shop floor. The cutter accepts APKT 1003 indexable inserts and is compatible with inserts from YG-1, allowing use of common insert grades and geometries for different materials. Indexable inserts mean only the cutting insert is replaced when worn, not the whole tool body, supporting cost-effective tooling management and straightforward maintenance procedures in busy production environments. Practical fit for workshop and industrial milling tasks This indexable cutter is specified for applications where a moderate depth of cut and reliable toolholding are priorities: the 30 mm cutting length provides ample engagement for pocketing, face milling or slotting passes within its diameter range. The compact mass (approx. 0.342 kg) simplifies handling and reduces spindle load during tool changes. As a component in a coordinated tooling strategy, the body complements standard toolholders and is suited to machine shops and production lines seeking dependable repeatability with indexable insert systems. For buyers prioritising procurement certainty, Metav’s European distribution ensures a practical supply route and technical consultation where required. For technical advice or to arrange supply of the Teknik Makina S032TM from Metav Werkzeuge — including availability and interchange options for APKT 1003 inserts — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for prompt, workshop-focused support. Technical data SKU: S032TM Manufacturer: Teknik Makina Product: Indexable milling cutter for APKT 1003-1604 indexable inserts Shank diameter: 20 mm Cutting length (shank): 30 mm Number of cutting edges: 3 Cutting angle: 90° Overall length: 100 mm Diameter: 20 mm Weight: 0.342 kg Compatible inserts: APKT 1003 Compatible insert manufacturer: YG-1 Torx screw: M2.5x5.5 Torx key: T8 FAQ Which inserts fit this cutter? The cutter accepts APKT 1003 indexable inserts; compatible insert grades from YG-1 are commonly used with this body. What is the shank diameter and overall length? Shank diameter is 20 mm and overall length is 100 mm, suited to standard toolholders for compact setups. How many cutting edges does the tool body provide? The body is built for 3 cutting edges, which helps balance chip load and reduce vibration during milling. What fixing hardware is used for insert clamping? Insert clamping uses a M2.5x5.5 Torx screw tightened with a T8 key to ensure repeatable clamp torque. For which machining tasks is this cutter intended? The design is aimed at milling operations utilising APKT 1003 inserts where a 30 mm cutting length and stable perpendicular engagement (90°) are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of reliable clamping and proven insert compatibility to maintain steady chip evacuation and cycle times; the 20 mm shank and 70 mm cutting length provide rigidity and reach for medium-depth milling. Order via Metav Werkzeuge or consult their specialists if further process optimisation is required. Shank milling cutter S186TM – for APXT 1003 indexable inserts, Ø20 mm (Teknik Makina) The Shank milling cutter S186TM is a robust shank tool engineered for machining operations with APXT 1003 indexable inserts, offering stable clamping and consistent chip control for CNC and manual milling stations Ø20 mm shank for stable clamping 70 mm cutting length for deep passes Compatible with APXT 1003 indexable inserts Torx screw M2.5x5.5 and T8 key included Stable removal rates and dimensional consistency for production The S186TM combines a Ø20 mm shank with a 70 mm cutting length to deliver a balance of rigidity and reach that supports repeatable material removal. With three cutting edges, the tool reduces vibration when subjected to moderate radial loads, improving surface finish and extending insert life. The specified geometry supports predictable tool life, which in turn lowers setup frequency and contributes to steady cycle times on serial workpieces. Fast insert changes and secure clamping to reduce downtime Tool changeover is simplified by a practical fastening system: the cutter uses a Torx screw M2.5x5.5 secured with the supplied T8 key, enabling quick, repeatable insert seating without additional fixtures. This configuration permits secure indexable insert clamping while allowing operators to perform service tasks at the machine, cutting internal handling times and keeping production flow uninterrupted. Versatile compatibility and material handling for mixed workloads Designed for APXT 1003 indexable inserts and tested for compatibility with Korloy grades, the cutter supports a variety of insert grades and chipbreaker types. This flexibility makes the tool suitable for aluminium, non-ferrous alloys and many steels when appropriate inserts are selected. The combination of indexable inserts and the shank tool approach provides economical edge changes versus solid-carbide alternatives, helping to manage tooling budgets without compromising performance. Integration into CNC toolsets and handling considerations With an overall length of 200 mm and a balanced mass of 0.5 kg, the shank cutter fits most standard toolholders while minimising centrifugal imbalance at moderate spindle speeds. The 90° face geometry delivers conventional shoulder milling behaviour, aiding in perpendicular wall generation and accurate step features. Where fixture rigidity and spindle power are adequate, the cutter supports efficient shoulder passes and pocketing with predictable forces and consistent surface results. Discuss specific machining scenarios with Metav Werkzeuge to align the S186TM with the right APXT 1003 insert grade and machining parameters for optimal throughput Technical data SKU: S186TM Manufacturer: Teknik Makina Article name: Shank milling cutter for APXT 1003 indexable inserts Dimensions & measurable data Shaft diameter: 20 mm Cutting length: 70 mm Overall length: 200 mm Diameter: 20 mm Cutting edges: 3 Weight: 0.5 kg Cutting angle: 90° Compatibility & fittings For APXT 1003 indexable inserts Compatible with Korloy inserts Torx screw: M2.5x5.5 Torx key: T8 ECLASS: 21180806 ETIM: EC011860 FAQ What insert type does this cutter accept? The cutter accepts APXT 1003 indexable inserts; insert geometry selection should match the intended material and surface finish requirements. Is a torque tool supplied for the fastening screw? A T8 key is supplied and the shank cutter uses a Torx screw M2.5x5.5 for insert clamping. What shank diameter and cutting length are available? The tool features a 20 mm shank diameter and a 70 mm cutting length, suitable for medium-depth milling operations. Can the tool be used with Korloy inserts? Yes, compatibility with Korloy insert grades is stated; confirm the chosen grade matches the machining task. What is the overall length and weight of the tool? Overall length is 200 mm and weight is approximately 0.5 kg, enabling straightforward toolholder integration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, high‑stability milling holder that combines reliable clamp security and proven insert compatibility for efficient production. Benefit from the 20 mm shank and 45 mm cutting length to maintain process stability and reduce changeover time; order directly via Metav Werkzeuge or consult the technical team for integration advice. Shaft cutter S016TM — indexable‑insert milling holder with 20 mm shank and 3 flutes (Teknik Makina) The Shaft cutter S016TM is an indexable‑insert milling holder designed for machining tasks that require stable clamping and quick insert changes; suitable for holders using AXMT 0602 and APKT 0903 inserts. 20 mm shank diameter for stable clamping 45 mm cutting length for deeper cuts Compatible with APKT 0903 and AXMT 0602 inserts Torx M2.5 fixing screw, T8 key required Reliable stability for repeatable machining results The milling holder delivers consistent rigidity thanks to its 20 mm shank and robust construction, which together reduce vibration and improve surface finish. Rigidity is a decisive factor when aiming for repeatable tolerances on batch workpieces; using a larger shank diameter improves load distribution in the toolholder and stabilises the cutting process. The measured weight of 0.296 kg contributes to a balanced assembly, while an overall length of 120 mm allows comfortable reach into typical clamping setups without compromising control. Fast insert changes and broad tooling compatibility Designed for indexable inserts such as APKT 0903 and AXMT 0602, the holder ensures rapid tool replacement and minimal downtime. The clamping is secured by a Torx M2.5 screw—engaged with a T8 key—so insert exchange is straightforward and repeatable. Clear compatibility with recognised insert standards simplifies procurement and tool planning, enabling efficient inventory management and the option to use inserts from multiple suppliers where appropriate. Productivity through focused cutting geometry Equipped with 3 flutes, the cutter holder suits operations where chip evacuation and balanced cutting action are priorities. The specified 45 mm cutting length permits deeper axial engagement while retaining cutter stability for slotting and face milling operations. For production environments requiring predictable tool life and consistent cycle times, the combination of the holder geometry and compatible indexable inserts supports higher feed rates and steady metal removal rates, contributing to improved throughput. Practical handling, assembly and maintenance The holder is supplied with defined fastening specifications to ensure safe mounting and servicing: the fixing screw dimension and torque key specification facilitate correct assembly and controlled clamping force. Clear labelling of the shank and cutting lengths simplifies selection for programming and setup. Routine checks of the Torx fixing and periodic inspection of insert seatings are recommended to maintain performance; simple maintenance keeps the holder ready for continuous use and reduces unplanned downtime. Contact Metav Werkzeuge for availability and tailored advice on Teknik Cutting Tools shaft cutters — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S016TM Manufacturer: Teknik Makina Product: Shaft cutter for AXMT 0602 and APKT 0903 Indexable Inserts Facts Shank diameter: 20 mm Cutting length (shank): 45 mm Number of cutting edges: 3 Overall length: 120 mm Weight: 0.296 kg Diameter: 20 Special features Compatible with APKT 0903 Also for AXMT 0602 indexable inserts Torx screw: M2.5x5.5 Torx key size: T8 Suitable insert manufacturer: Taegutec FAQ Which insert types fit this holder? The holder accepts APKT 0903 and AXMT 0602 indexable inserts; the product is specified for these geometries to ensure correct seating and optimal cutting performance. What is the shank diameter and why does it matter? A 20 mm shank diameter is provided; a larger shank improves rigidity and helps maintain machining accuracy under load for repeatable results. How deep can the cutter engage axially? The cutter offers a 45 mm cutting length, which permits deeper axial engagement for slotting and face milling within the limits of machine and clamping setup. Which screw and key are required for insert clamping? Insert clamping uses a Torx M2.5x5.5 screw and requires a T8 key for proper fastening and repeatable seating. Is the holder suitable for high‑feed operations? With 3 flutes and a stable shank, the holder supports productive feeds where chip evacuation and balanced cutting are required; final parameters depend on insert grade and workpiece material. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of a 20 mm shank and a 130 mm overall length together with compatibility for LNMX 0603 indexable inserts; order directly via Metav Werkzeuge or consult our experts for guidance. S285TM — Shank milling cutter for LNMX 0603 indexable inserts (20 mm shank, 130 mm overall length) The S285TM is a robust shank milling cutter intended for industrial milling operations using LNMX 0603 indexable inserts, designed to deliver consistent chip control and reliable toolholding in production environments. 20 mm shank for secure toolholding Compatible with LNMX 0603 indexable inserts Three cutting edges for efficient material removal Torx M3x7 retention screw; T8 key Stable toolholding for repeatable accuracy A rigid toolholder begins with a stable interface. The 20 mm shank and matched tool taper provide a firm connection between spindle and cutter, reducing chatter and improving surface finish. With an overall length of 130 mm, the assembly balances reach with rigidity, lowering the risk of deflection during interrupted cuts. For workshops aiming to maintain tight tolerances, the emphasis on stable clamping reduces rework and keeps cycle times predictable. Efficient cutting courtesy of LNMX 0603 indexable inserts Designed for use with LNMX 0603 indexable inserts from Korloy, the cutter accepts small, easily rotated inserts that restore cutting performance without replacing the whole tool body. The cutter’s three cutting edges provide a good compromise between chip evacuation and feed stability, enabling steady material removal rates while extending the interval between indexings. For production runs where tool-change speed and predictable output matter, this design supports consistent throughput. Practical retention and quick insert handling Retention is handled by a Torx fastening system that uses a M3x7 retention screw and a T8 key, ensuring a secure seat for each insert. The straightforward fastening geometry simplifies service procedures at the machine, shortening downtime when inserts are changed. Clear mechanical engagement and proven fastener sizes keep maintenance predictable and allow trained technicians to perform safe, repeatable insert replacements. Workshop fit and operational advantages Manufactured by Teknik Makina, the tool is engineered for integration into standard milling setups that accept a 20 mm shank interface. The combination of a compact cutter body and indexable inserts supports flexible tooling strategies: keep a small inventory of tool bodies while stocking a range of inserts for different materials and operations. This approach reduces storage complexity and helps maintain production readiness across diverse machining tasks. Discuss integration of the Teknik Makina S285TM with Metav Werkzeuge — contact the Emmerich team for a tailored tooling recommendation or technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: S285TM Name: Shank milling cutter (translated) Manufacturer: Teknik Makina Article type: Shank milling cutter for indexable inserts ECLASS: 21180806 ETIM: EC011860 Numbers / Core technical data Shank diameter: 20 mm Cutting diameter: 20 mm Overall length: 130 mm Number of cutting edges: 3 Designs / Special features Compatible with LNMX 0603 indexable inserts Suited to Korloy LNMX 0603 inserts Retention screw: M3x7 Required key: T8 Manufacturer SKU / ID: S285TM FAQ Which inserts are compatible with this cutter? The cutter is compatible with LNMX 0603 indexable inserts; it is specified to accept Korloy LNMX 0603 types. What is the shank diameter and overall length? Shank diameter is 20 mm and overall length is 130 mm for the S285TM shank milling cutter. How many cutting edges does the tool have? The tool body is specified with three cutting edges to balance feed stability and chip control. Which retention screw and key are required? Retention uses an M3x7 Torx screw and the corresponding T8 key for secure insert clamping. Who manufactures this tool? This tool is manufactured by Teknik Makina and supplied under the SKU S285TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the tool's 20 mm shank, integrated internal coolant and compatibility with XEKT 1904 indexable inserts to reduce downtime and maintain consistent milling quality. Order the tool directly via Metav Werkzeuge or contact their specialists for tailored application advice. 20 mm Shank Milling Cutter S383TM — indexable cutter for XEKT 1904 inserts with internal coolant (Teknik Makina) A 20 mm Shank Milling Cutter S383TM engineered for reliable indexable-insert milling with through-tool coolant for improved process stability. 20 mm shank for stable toolholding Internal coolant for improved chip evacuation Compatible with Korloy XEKT 1904 inserts Stable connection for consistent surface quality Engineered to provide a rigid interface with CNC toolholders, the 20 mm shank delivers lower run-out and reduced vibration, which directly improves finish and repeatability. With an overall length of 130 mm, the tool balances reach and stiffness to suit many machining set-ups. Compatibility with XEKT 1904 indexable inserts from Korloy simplifies stocking and replacement, enabling predictable cutting performance across batches. Coolant delivered where it matters to extend tool life The integrated internal coolant channels cutting fluid directly to the engagement zone, lowering temperatures and improving chip control during high-duty cycles. This feature helps maintain insert edge integrity and reduces the frequency of regrinds or replacements, supporting longer uninterrupted production runs. Secure clamping via a Torx T15 screw (M4x8.5) ensures repeatable positioning after insert changes. Fast insert changes and compact handling Designed for a single-insert head, the cutter keeps service times short and spare-part complexity low. The 61 mm cutting length provides sufficient engagement for a wide range of milling tasks while the modest mass (0.251 kg) makes handling and set-up straightforward on the shop floor. The straightforward clamp design supports efficient turnover during batch or toolpath changes. Practical productivity gains in everyday machining Suited to workshops and production cells that rely on indexable tooling, this shank cutter enables efficient material removal for roughing and light finishing when paired with the appropriate insert grades. The tool’s balance of rigidity and reach cuts set-up time and contributes to higher machine uptime. Standardised Torx fixation and Korloy compatibility allow smooth integration into established tooling systems, so the focus remains on output rather than fitment. For reliable indexable milling with through-tool coolant, contact Metav Werkzeuge for technical advice and availability of the Teknik Makina S383TM—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S383TM Product type: Shank milling cutter Brand: Teknik Makina Compatible inserts: XEKT 1904 (Korloy) Facts Diameter: 20 mm Shank diameter: 20 mm Overall length: 130 mm Cutting length: 61 mm Weight: 0.251 kg Number of cutting edges: 1 Special features Internal coolant: yes Clamping screw: M4x8.5 Torx key: T15 Suitable for Korloy inserts FAQ Which indexable inserts are compatible with this cutter? The 20 mm Shank Milling Cutter S383TM is designed for XEKT 1904 indexable inserts and is compatible with the Korloy XEKT 1904 series. Does the tool provide through-tool coolant? Yes, the cutter features internal coolant to supply fluid directly to the cutting zone and improve chip evacuation. What clamping hardware is used for the insert? Clamping is secured with an M4x8.5 screw tightened via a Torx T15 key for consistent retention of the insert. How long is the cutting length and what is the overall length? The tool has a cutting length of 61 mm and an overall length of 130 mm, offering a balance of reach and stiffness for general milling tasks. Is this cutter suitable for quick retooling in batch production? The single-insert configuration and Torx clamping enable rapid insert replacement and straightforward handling, supporting efficient retooling between batches. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable-insert system that combines compatibility with SECO inserts, a compact 20 mm shank and a 60 mm cutting length to keep cycle times low and tooling costs predictable — order through Metav Werkzeuge or request advice from our technical team. Shank milling cutter S641TM – holder for XOMX 0602-1204 indexable inserts, 20 mm shank The Shank milling cutter S641TM is a precision toolholder designed for indexable-insert milling in CNC and manual operations, suitable for shoulder and face milling with XOMX 1204 inserts. Compatible with SECO indexable inserts 20 mm shank diameter for standard toolholders 60 mm cutting length for deep milling Two cutting edges, 90° shoulder angle Faster machining with proven indexable-insert economy The holder is engineered to make the most of indexable inserts, reducing downtime for resharpening and lowering cost per part. With a 60 mm cutting length and a compact design, the toolholder enables longer cuts without frequent changeovers, which improves throughput on repetitive operations. The economic advantage is clear: replace only the insert rather than the entire cutter, while maintaining consistent precision across batches. Compatibility with established insert systems keeps tooling procurement straightforward and helps standardise production. Simple fit-up and maintenance for steady production A 20 mm shank matches common toolholder interfaces, delivering secure clamping and repeatable concentricity in milling spindles and adaptors. The insert is secured with a Torx screw M3.5x8.5, tightened with a T10 key, allowing quick changeovers and reliable clamping torque. This straightforward maintenance reduces operator time spent on tool swaps and limits process variation. The toolholder’s balanced geometry and modest weight (0.504 kg) support stable cutting conditions, contributing to consistent surface quality and longer insert life. Practical advantages on the workshop floor The toolholder’s 90° cutting angle and two cutting edges are optimised for robust shoulder milling and contouring where square faces and sharp steps are required. Use of XOMX 1204 indexable inserts provides a versatile cutting edge for a range of materials when matched to the appropriate insert grade. For procurement and process planning, the compact overall length (200 mm) and the defined shank and cutting lengths simplify fixture clearance checks and toolpath programming. Combined with Metav’s quality control and supply reliability, this holder supports predictable production cycles and repeatable results. For tailored technical matching or to source Teknik Cutting Tools components via Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance and fast delivery Technical Data Article number: S641TM Manufacturer: Teknik Makina Designation: Shank milling cutter for XOMX 0602-1204 Indexable Inserts Compatible inserts manufacturer: SECO Facts Shank diameter: 20 mm Cutting length: 60 mm Total length: 200 mm Number of cutting edges: 2 Cutting angle: 90° Weight: 0.504 kg Special features Torx screw M3.5x8.5 Torx key T10 For XOMX 1204 inserts Suitable for indexable-insert milling applications FAQ Which inserts are compatible with this holder? The holder accepts XOMX 1204 indexable inserts and is specified for XOMX 0602-1204 insert types; compatibility with SECO-standard inserts is stated for the Teknik Cutting Tools shank milling cutter S641TM. How is the insert fastened? An M3.5x8.5 Torx screw secures the insert; use a T10 Torx key to tighten or release the screw when changing inserts on the S641TM. What applications suit this cutter holder? The 90° cutting angle and two cutting edges make the holder well suited to shoulder milling, face milling and operations requiring square shoulders in CNC and manual milling centres. Does the shank fit standard toolholders? The 20 mm shank diameter is compatible with standard 20 mm toolholder interfaces and adaptors commonly used in milling setups for stable clamping. What should be considered when programming for this tool? Account for the total length of 200 mm and the 60 mm cutting length when setting tool offsets and collision clearances; the defined geometry simplifies pathing and fixture checks for the S641TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Taking advantage of an internal coolant supply, a 20 mm shank and three cutting edges delivers stable, efficient milling with predictable tool life; order the milling cutter directly via Metav Werkzeuge or consult our specialists for application-specific advice. Schaftfräser for BLMP 0603 Indexable Inserts — 20 mm shank, internal coolant (Teknik Makina) A Schaftfräser designed as an insert-holder milling cutter for BLMP 0603 indexable inserts, suited for precision face and slot milling on CNC machines. 20 mm shank diameter Internal coolant supply Fits BLMP 0603 indexable inserts Three cutting edges for stable cuts Reliable stability for precision milling The holder is engineered around a 20 mm shank and a total length of 150 mm, providing a compact tool geometry that minimises vibration and runout in demanding operations. The three-flute configuration delivers a balance between material removal rate and stability: fewer flutes reduce cutting forces and enable better chip evacuation, while the trio of cutting edges ensures consistent surface finish and dimensional repeatability. The relatively low mass (approximately 0.335 kg) contributes to reduced spindle load and improved concentricity, which in turn supports tighter tolerance work on production parts. Controlled coolant routing reduces heat and extends insert life Integrated internal coolant channels deliver cutting fluid directly to the insert seat, improving cooling at the primary cutting zone and flushing chips away from the insert pocket. This targeted coolant supply lowers thermal load on the insert and reduces built-up edge, which helps to prolong indexable insert life and maintain consistent cycle times. The holder is compatible with BLMP 0603 style inserts from Taegutec, facilitating quick insert changes and predictable performance across a range of ferrous and non-ferrous milling tasks commonly found in job shops and production cells. Service-friendly fastening and compact design for efficient workflows Maintenance and insert replacement are simplified by the Torx T8 drive and the specified M3x6.2 screw, allowing fast, repeatable clamping with standard workshop tools. The design features a 40 mm cutting-length section for effective engagement in slotting and face milling while keeping the tool overhang moderate for enhanced rigidity. The combination of a compact profile, straightforward screw access and standardised insert compatibility supports quick set-ups and reduces machine downtime, making the tool a practical choice for high-mix, low-to-medium-volume production runs. For reliable high-performance milling with Teknik Makina tooling, request this insert-holder from Metav Werkzeuge — Metav’s technical team in Emmerich can advise on the right BLMP 0603 inserts and supply options to suit production needs. Technical data Article number: S481-1TM Eclass: 21180806 Label: 20mm Schaftfräser BLMP 0603 L150mm mit Innenkühlung Manufacturer: Teknik Makina Facts Diameter: 20 mm Overall length: 150 mm Weight: 0.335 kg Shank diameter: 20 mm Cutting length (shank): 40 mm Cutting edges: 3 Special features Internal coolant: yes Compatible inserts: BLMP 0603 Compatible insert manufacturer: Taegutec Torx key: T8 Torx screw: M3x6.2 SKU: S481-1TM FAQ What inserts fit this holder? The holder accepts BLMP 0603 indexable inserts; compatibility is confirmed with inserts from Taegutec and the tool is supplied under SKU S481-1TM. Is coolant-through capability included? Yes — the holder features internal coolant channels to direct fluid to the insert seat and the primary cutting zone. What are the key dimensions for tool set-up? Key dimensions: 20 mm shank diameter, 150 mm overall length and a 40 mm cutting-length section; these values support compact set-ups and moderate overhangs. How is the insert secured and serviced? Inserts are secured with a Torx drive (T8) and an M3x6.2 screw for quick, repeatable replacement and straightforward maintenance. Which manufacturer produced this tool? The tool is supplied by Teknik Makina; full identification appears with SKU S481-1TM for ordering and inventory. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of a 20 mm shank, compatibility with ENMX 0604 indexable inserts and three cutting edges for steady material removal and repeatable set-up. Order direct via Metav Werkzeuge or consult our specialists for integration into existing toolholders. Shank cutter S109TM — for ENMX 0604 indexable inserts, 20 mm shank, 3 cutting edges (Teknik Makina) The Shank cutter S109TM is a compact shank milling tool designed to accept ENMX 0604 indexable inserts and to serve precision milling tasks on CNC machines and workshop spindles. Compatible with ENMX 0604 indexable inserts 20 mm shank for secure clamping Three cutting edges for stable material removal Torx M2.5x7 screw with T8 key for straightforward maintenance Precise compatibility speeds set-up and repeatability The tool is built for reliable interfacing with ENMX 0604 indexable inserts, a standard insert format that simplifies stocking and replacement. With a 20 mm shank and an overall length of 160 mm, the cutter provides a familiar form factor for many toolholders and collets, enabling quick changeovers and repeatable clamping. The combination of standard insert geometry and a consistent shank diameter helps to reduce set-up time and to keep machining tolerances stable across batches. Stable cutting action and reduced process interruptions Equipped with three cutting edges, the cutter balances cutting forces to deliver steady chip evacuation and smoother feeds compared with more asymmetric designs. The tool secures its inserts with a M2.5x7 Torx screw, serviced with a T8 key, which streamlines insert changes and reduces downtime. This design focus on mechanical simplicity yields an efficient tool life cycle: fewer surprises during production, easier maintenance routines and predictable performance during longer runs. Integration into workshop workflows with recognised supply reliability As a branded component from Teknik Makina, this shank milling tool fits into professional workflows where standardisation and availability matter. Compatibility with inserts from YG-1 supports interchangeability in specialist tooling stores and reduces logistics complexity. The compact dimensions and industry-standard fixing method make the cutter suitable for small-batch precision work as well as series production where tool change speed and consistent results are priorities. For technical clarification or to discuss suitability for specific machines, contact Metav Werkzeuge to arrange a tailored recommendation or ordering plan — Metav Werkzeuge will advise on toolholder matching and delivery from Emmerich. Technical data Article number: S109TM Name: Shank cutter / Schaftfräser Designation: for ENMX 0604 Indexable Inserts Manufacturer: Teknik Makina Facts Diameter: 20 mm Overall length: 160 mm Shank diameter (clamping): 20 mm Number of cutting edges: 3 Torx screw: M2,5x7 Torx key: T8 Compatible insert family: ENMX 0604 Special features Compatible insert manufacturer: YG-1 Indexable insert retention by Torx screw Suitable for standard 20 mm toolholders FAQ What insert type does the cutter use? The cutter accepts ENMX 0604 indexable inserts; the retention system uses a M2.5x7 Torx screw as supplied with the S109TM. What is the shank size and overall length? The S109TM features a 20 mm shank and an overall length of 160 mm, making it compatible with common 20 mm collets and holders. How many cutting edges does the tool have and what is the benefit? The shank milling tool has three cutting edges, which balance cutting forces for stable removal and improved surface consistency in many milling operations. Is the cutter compatible with inserts from other manufacturers? The tool is specified for ENMX 0604 inserts and is compatible with inserts from YG-1, ensuring interchangeability with that supplier's geometry. Which screw and key are required for insert changes? Insert clamping is achieved with a M2.5x7 Torx screw and the corresponding T8 key, enabling quick and secure insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of stable clamping and internal coolant for consistent cycle times, plus compatibility with LNMX 1006 indexable inserts for rapid insert changes; order the tool directly via Metav Werkzeuge or ask the technical consultants for application advice. Shank cutter for LNMX 1006 indexable inserts by Teknik Makina — 20 mm shank, internal coolant Shank cutter for use in heavy-duty indexable milling applications, designed to accept LNMX 1006 indexable inserts and to maintain performance under continuous production conditions Internal coolant for improved chip evacuation 20 mm shank for stable clamping Compatible with LNMX 1006 indexable inserts 25 mm cutting length for precise engagement Consistent machining performance and reduced set-up time The 20 mm shank and substantial overall length deliver a rigid connection to the spindle, which stabilises cutting forces and reduces vibration-driven rejects. With a 120 mm overall length and a 25 mm cutting length, the tool is optimised for typical profiling and shoulder operations where repeatability matters. The presence of internal coolant supports consistent cutting temperatures and efficient chip evacuation, which in turn helps to extend insert life and reduce unscheduled tool changes. These technical characteristics focus on throughput and predictable cycle times, making the cutter a pragmatic choice for production work where process stability is critical. Rapid insert changes, clear fastening and service-friendly design Compatibility with LNMX 1006 indexable inserts — from manufacturers such as Korloy — allows familiar insert geometries and grades to be used without altering machine set-ups. The cutter uses an M3x7 securing screw tightened with a Torx T8, a standardised fixing that simplifies routine maintenance and minimises downtime during insert replacement. By employing replaceable cutting edges rather than solid carbide tips, the system reduces consumable costs per cutting edge and streamlines workshop logistics. The design emphasises straightforward serviceability while retaining industrial robustness. Built for the workshop and the production line Produced by Teknik Makina, this shank cutter combines a measured mass with practical handling: at 0.292 kg it is light enough for fast tool changes yet engineered to retain stiffness where it matters. The tool’s two cutting edges provide a balance between material removal rate and surface finish consistency for many indexable milling tasks. Supplied under SKU LN099-1TM, the cutter is intended for users who require reliable, indexable tooling that integrates with standard insert ranges and conventional fastening systems. For machining cells where internal coolant lines are available, this cutter supports sustained operation with fewer interruptions. For reliable indexable milling with internal coolant, request a technical quote or application consultation from Metav Werkzeuge — contact +49 2822 7131930 or info@metav-werkzeuge.com and reference the Teknik Makina shank cutter (SKU LN099-1TM) Technical Data SKU: LN099-1TM Manufacturer: Teknik Makina Product type: Shank cutter Label: 20mm shank cutter LNMX 1006 L120mm with internal coolant Core specifications Diameter: 20 mm Overall length: 120 mm Shank diameter: 20 mm Cutting length: 25 mm Cutting edges: 2 Weight: 0.292 kg Design & special features Internal coolant: yes Compatible inserts: LNMX 1006 Compatible insert manufacturer: Korloy Securing screw: M3x7 Torx key size (for tightening): T8 FAQ Can this cutter be used with Korloy LNMX 1006 inserts? Yes. The Teknik Makina shank cutter is compatible with LNMX 1006 indexable inserts and is routinely used with Korloy grades for a range of machining tasks. What fixing system secures the inserts on the tool? The inserts are secured with an M3x7 screw requiring a Torx T8 for tightening; the fastening method is standard for this insert format. Does the tool supply internal coolant to the inserts? Yes. The cutter features internal coolant to support chip evacuation and temperature control at the cutting zone. What are the shank and overall dimensions? The tool has a 20 mm diameter shank and a 120 mm overall length, with a 25 mm effective cutting length. Which SKU should be referenced for ordering or specification checks? Reference SKU LN099-1TM for ordering, spare-part queries or tool management records. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of reliable insert compatibility, compact 20 mm shank design and a 56 mm cutting length for efficient, repeatable milling. Order directly via Metav Werkzeuge or contact their consultants for tailored advice and assured supply. Shank milling cutter S378TM by Teknik Makina — for P32 indexable inserts, 20 mm diameter The S378TM is a shank milling cutter designed for machining with P32 indexable inserts, suited to light and medium-duty milling in standard toolholders. Precision 20 mm shank diameter 56 mm cutting length for deep operations Designed for P32 indexable inserts Torx M5 screw, T20 key interface Faster, more economical machining with insert technology The use of indexable inserts reduces downtime and tooling costs by allowing rapid insert changes instead of full-tool replacements. With a compact 20 mm shank and a 56 mm cutting length, this cutter offers a balance between accessibility and reach, enabling efficient side and face milling on small to medium components. The insert system suits standard insert sizes such as P32, which simplifies stock management and speeds up production runs while maintaining consistent cutting geometry. Secure mounting and straightforward integration into existing setups The clamp is secured with a Torx M5 screw requiring a T20 key, providing reliable insert retention and reproducible clamping torque for predictable results. The shank diameter and overall dimensions make the tool compatible with common collets and holders, and its design aligns with established insert manufacturers like Walter, ensuring straightforward integration into current tool inventories. This reduces setup complexity and supports fast tool changes on the shop floor. Predictable results and less inventory complexity By using an indexable-insert cutter rather than solid-carbide variants, maintenance becomes a matter of replacing inserts when worn rather than the entire tool, which lowers ongoing costs and simplifies stockkeeping. The cutter’s specifications — including a 20 mm diameter and a total length of 200 mm — aid in planning toolpaths and fixture design, contributing to stable machining and consistent surface quality. Metav’s selection process and supply chain support mean reliable availability for production continuity. For dependable performance with Teknik Cutting Tools’ S378TM, contact Metav Werkzeuge in Emmerich for personalised procurement advice and guaranteed supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S378TM Manufacturer: Teknik Makina Product: Shank milling cutter for P32 indexable inserts Compatible with: Walter inserts Core data Shank diameter: 20 mm Cutting length: 56 mm Diameter: 20 mm Overall length: 200 mm Weight: 0.505 kg Torx screw: M5 Torx key size: T20 Features For P32 indexable inserts (P32 20) Torx clamp screw interface SKU S378TM FAQ Which insert type fits this cutter? The cutter is designed for P32 indexable inserts and accepts inserts specified as P32 20. What is the shank diameter and overall length? Shank diameter is 20 mm and the total length is 200 mm for the S378TM. How is the insert secured? Inserts are clamped with a Torx M5 screw; a T20 key is used to apply the correct torque. Is the cutter compatible with inserts from other manufacturers? The S378TM is compatible with standard P32 geometry and is listed as fitting Walter inserts; interchangeability depends on matching insert form and size. What advantages does an indexable-insert cutter provide? Indexable inserts allow rapid replacement, reduced downtime, and lower tooling inventory compared with solid tools, improving cost-efficiency for repetitive production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise tool geometry and secure clamping for dependable milling results; the combination of a 20 mm shank and a 60 mm cutting length provides a stable cutting stance with long reach. Order the S218TM shaft cutter directly via Metav Werkzeuge or consult the team for application advice. S218TM shaft cutter — 20 mm shank, for APKT 0903 indexable inserts (Teknik Makina) The S218TM is a robust shaft cutter designed for use with APKT 0903 indexable inserts, intended for general face and shoulder milling in industrial and workshop environments. 20 mm shank diameter 60 mm cutting length 3 cutting edges Compatible with APKT 0903 inserts by Walter Consistent metal removal through proven insert geometry The tool relies on proven insert seating for predictable chip formation and repeatable results. With a 90° cutting angle and 3 cutting edges, the design optimises material removal per pass while maintaining surface integrity. This geometry reduces the need for frequent rework and supports reliable batch processing — an important advantage where cycle times and part quality must be controlled. Stable clamping and extended reach for versatile setups A 20 mm shank combined with a 200 mm overall length delivers reach without compromising stiffness. The 60 mm cutting length gives the necessary overlap for shoulder and face milling tasks, while the secure fixation using a M2.5x7 Torx screw tightened with a T8 key ensures the insert seat remains stable under load. The result is reduced vibration, longer insert life and fewer interruptions for re-tightening. Quick insert changes and broad compatibility to reduce downtime Designed specifically for APKT 0903 indexable inserts and compatible with Walter-manufactured inserts, the cutter simplifies logistics and tooling management. Indexable inserts allow rapid replacement of the cutting edge without regrinding, which shortens maintenance intervals and keeps production lines moving. The modular approach also makes it straightforward to adapt cutting grades for different machining tasks. Built for industry and workshop demands with dependable handling Weighing in at approximately 0.502 kg, the cutter balances manoeuvrability and robustness for routine handling and fixture changes. The combination of a standard shank, common Torx clamping and compatibility with widely used insert formats supports integration into existing tool inventories. For procurement and service, Metav’s supply chain provides centralised access and reliable fulfilment to keep workshops supplied. For procurement, technical clarification or to arrange delivery of the Teknik Makina S218TM shaft cutter, contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for professional assistance and fast supply. Technical data Article number: S218TM Manufacturer: Teknik Makina Description: Shaft cutter for APKT 0903 indexable inserts Facts Shank diameter: 20 mm Cutting length: 60 mm Cutting edges: 3 Cutting angle: 90° Overall length: 200 mm Weight: 0.502 kg Torx screw: M2.5x7 Torx key: T8 Special features Designed for APKT 0903 indexable inserts Compatible with Walter inserts Indexable insert system for fast edge change Balanced weight for handling and stability FAQ Which inserts fit this cutter? The S218TM shaft cutter is designed for APKT 0903 indexable inserts and is compatible with Walter-manufactured inserts. What are the main dimensions of the tool? Key dimensions for the S218TM are a 20 mm shank, 60 mm cutting length and 200 mm overall length; weight is approx. 0.502 kg. How is the insert secured? Inserts are fixed with a M2.5x7 Torx screw; a T8 Torx key is required for tightening. How many cutting edges does the cutter provide? The cutter uses 3 cutting edges, enabling balanced cutting forces and steady chip evacuation. For which operations is the cutter intended? The S218TM is intended for face and shoulder milling where APKT 0903 indexable inserts are specified, offering quick edge replacement and integration into standard tooling systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of robust shank design, compatibility with APKT 1003 indexable inserts and secure Torx clamping for uninterrupted production. Order the indexable milling cutter directly via Metav Werkzeuge or consult the team for application-specific advice. Indexable milling cutter S767TM – 20 mm shank, 3 cutting edges by Teknik Makina Indexable milling cutter S767TM designed for efficient face and shoulder milling with APKT 1003 indexable inserts, suitable for general-purpose machining in workshop and light production environments. 20 mm shank diameter 90 mm overall length For APKT 1003 indexable inserts 3 cutting edges for stable cutting Torx screw M2.5×5.5, Torx key T8 Consistent performance through solid shank and secure clamping The combination of a 20 mm shank and a compact 90 mm overall length provides a stable toolholder interface and reduced overhang, which directly improves stiffness and repeatability in milling operations. With a rigid connection between tool and spindle, vibration is minimised and the achievable surface finish is improved. The supplied Torx screw M2.5×5.5 with T8 drive ensures positive clamping of the insert seat, lowering the risk of insert movement under load and extending productive tool life. Optimised cutting behaviour with three cutting edges Featuring three cutting edges, the cutter balances chip load and feed per tooth to deliver efficient material removal while keeping cutting forces moderate. The design is tailored for indexable inserts in the APKT 1003 format, enabling quick index changes and consistent geometry across edges. Using standardised inserts from Palbit simplifies supply logistics and reduces set-up time, making the tool a pragmatic choice for batch runs and mixed-material jobs where insert rotation and replacement are preferred over regrinding. Seamless integration into workshop workflows and maintenance The tool’s geometry and fastening system support fast insert replacement and straightforward maintenance, contributing to shorter tool-change times and higher machine uptime. Compatibility with widely available APKT 1003 inserts means stock management is simplified, while the defined Torx fastening keeps consumables consistent across the production line. For production planners and maintenance teams, this results in fewer interruptions and predictable tool performance, which supports stable cycle times and easier process standardisation. Contact Metav Werkzeuge for tailored technical advice on Teknik Makina indexable milling cutters and to request further specifications by e‑mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: S767TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Core measurements Shank diameter: 20 mm Cutting diameter: 20 mm Overall length: 90 mm Number of cutting edges: 3 Torx screw: M2.5×5.5 Torx key: T8 Compatibility & features For APKT 1003 indexable inserts Compatible with Palbit inserts Indexable insert type: APKT 1003 Fastening: Torx screw M2.5×5.5 FAQ Which inserts fit this cutter? The cutter accepts APKT 1003 indexable inserts; Palbit-manufactured APKT 1003 inserts are compatible with the S767TM from Teknik Makina. What are the key dimensions to check for toolholder compatibility? Check the shank diameter of 20 mm and the overall length of 90 mm to ensure correct fitment in the intended toolholder and sufficient clearance for the application. How many cutting edges does the tool provide and what is the benefit? The S767TM has three cutting edges; this geometry balances material removal rate and cutting forces to deliver stable machining and improved surface quality. What fastening hardware is supplied and which key is required? Fastening uses a Torx screw M2.5×5.5 and requires a T8 Torx key for secure insert clamping and straightforward replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise indexable-insert compatibility, a compact 20 mm shank and a 60 mm cutting length for consistent milling performance — order directly via Metav Werkzeuge or consult the Metav team for application advice. Shank milling cutter S036TM by Teknik Makina — 20 mm diameter, for APKT 1003–1604 indexable inserts The Shank milling cutter S036TM is a compact indexable-insert milling tool engineered for reliable shoulder and face milling with APKT 1003–1604 inserts 20 mm diameter shank 60 mm cutting length 3 cutting edges for stable milling Compatible with APKT 1003–1604 inserts Productivity through proven insert compatibility The S036TM is built around the proven economy of indexable inserts. Accepting APKT 1003–1604 types and matching common suppliers such as YG‑1, the tool reduces downtime associated with regrinding: worn cutting edges are replaced in seconds rather than hours. This approach yields a clear operational advantage — consistent geometry across changes preserves cycle times and contributes to a predictable production process. For procurement and production planners, the combination of insert interchangeability and a compact tool body contributes to lower lifecycle costs and simplified tooling logistics. Stable cutting performance and predictable results With a 20 mm shank diameter and a 60 mm cutting length, the tool provides a balance between rigidity and reach. The 3 cutting edges and a 90° cutting angle are optimised for shoulder milling and facing tasks where square corners and flat surfaces are required. Engineers benefit from reduced vibration and improved surface finish because the cutter geometry maintains cutting forces within predictable ranges. For teams unfamiliar with insert terminology: indexable inserts are replaceable carbide tips mounted to the cutter body, combining the affordability of consumable tips with the accuracy of a solid tool system. Secure clamping and simple maintenance The insert clamping is executed with a Torx screw (M2.5×5.5) tightened with a T8 key, ensuring a repeatable and robust seat for each insert change. This standardised fastening minimises the risk of incorrect torque and supports safe operation under typical milling loads. Maintenance routines are therefore straightforward: inspect, loosen the Torx screw, replace the insert and retorque to specification. The light overall mass and compact footprint make handling simple on the shop floor while supporting frequent insert changes without special equipment. Application fit and workshop efficiency Designed as an insert milling solution, the cutter suits workshops seeking flexibility between roughing and finishing by varying insert grades and geometries. The tool’s compatibility with a common insert family allows rapid adaptation to different materials and cutting strategies without replacing the entire cutter body. For production managers, the core benefit is clear: fewer toolholders to stock, faster tool changes, and the ability to scale cutter performance through insert selection. The S036TM therefore functions as a practical building block in modular tooling systems. Contact Metav Werkzeuge today for tailored application advice and to secure the Teknik Cutting Tools shank milling cutter S036TM — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific operations Technical data SKU: S036TM Type: Shank milling cutter for APKT 1003–1604 indexable inserts Brand: Teknik Makina Core measurements Diameter: 20 mm Shank diameter: 20 mm Cutting length: 60 mm Overall length: 150 mm Cutting edges: 3 Cutting angle: 90° Weight: 0.368 kg Compatibility & special features Compatible inserts: APKT 1003–1604 Suitable insert manufacturer: YG‑1 Torx screw: M2.5×5.5 Torx key: T8 FAQ Which insert types fit this cutter? The shank milling cutter S036TM is designed for APKT 1003–1604 indexable inserts and is compatible with inserts from manufacturers such as YG‑1 What are the main dimensions to check for machine setup? Key dimensions are 20 mm diameter, 60 mm cutting length and 150 mm overall length; these determine tool clearance and holder compatibility How is the insert secured and which key is required? Inserts are secured with a Torx screw (M2.5×5.5) using a T8 key for reliable clamping on the S036TM How many cutting edges are available and what do they offer? The cutter provides 3 cutting edges, offering a balance of cutting stability and efficient chip evacuation for shoulder and face milling Is the S036TM suitable for rapid insert changes on the shop floor? Yes — the design and standard Torx fastening enable quick, repeatable insert changes to support efficient shop‑floor workflows Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com