Gibt es einen Hahn und Kolb Online Shop?

Benefit from reliable compatibility with XC-- 10T304 indexable inserts, a compact 102 mm overall length and a 20 mm nominal diameter for consistent hole quality; these attributes support repeatable drilling and short tool-change times. Order the indexable insert drill body directly via Metav Werkzeuge or ask our consultants if additional technical information is required. Indexable insert drill body U24TM – 20 mm, 102 mm overall length (Teknik Makina) Indexable insert drill body U24TM is a compact, insert-compatible drill body engineered for production drilling with XC-- 10T304 indexable inserts and suited to general metalworking applications 20 mm nominal diameter Compatible with XC-- 10T304 inserts 45 mm cutting length 102 mm total length Reliable chip control and consistent hole geometry The design focuses on repeatability and steady chip evacuation, which in practice means more consistently sized holes and fewer interrupted cycles. Using an insert-based cutting edge arrangement rather than a monolithic tip allows fast insert replacement and constant surface quality. The combination of a 20 mm nominal diameter and a 45 mm cutting length offers a balance between rigidity and accessibility, supporting typical workshop and light-production drilling tasks with stable hole walls and reduced rework. Straightforward compatibility that reduces setup time Compatibility with the XC-- 10T304 insert family and the specified Taegutec insert system simplifies inventory and reduces search time for spare parts. Insert changes are secured with a T15 Torx drive and M4.5×11 retaining screw for a reliable, repeatable clamp; this reduces downtime and the need for specialised tools. For customers less familiar with indexable systems: an indexable insert is a replaceable carbide cutting tip, which means worn geometry is renewed in seconds rather than replacing the whole drill body. Durability engineered for continuous operation Manufactured to support everyday workshop demands, the tool body combines a compact 102 mm overall length with a robust shank and a low mass of 0.33 kg, offering both handling ease and sufficient stability. The compact architecture shortens overhang and improves process reliability, especially when machining standard steels and general engineering materials. With clearly defined insert seats and standard fastening hardware, maintenance cycles are shorter and tool life is determined largely by insert choice and cutting parameters rather than the body itself. Choose the Teknik Makina U24TM indexable insert drill body for reliable, repeatable drilling with XC-- 10T304 inserts — contact Metav Werkzeuge in Emmerich for ordering or technical advice. Technical Data SKU: U24TM Manufacturer: Teknik Makina Product type: Indexable insert drill body Label: 20 mm indexable insert drill body XC-- 10T304 L102mm Core technical data Diameter: 20 mm Total length: 102 mm Cutting length: 45 mm Shank length: 56 mm Weight: 0.33 kg Torx key: T15 Torx screw: M4.5×11 ECLASS: 21180201 Special features Compatible with XC-- 10T304 indexable inserts Suitable inserts manufacturer: Taegutec for XC-- 10T304 indexable inserts (insert system) FAQ Which inserts fit this drill body? The U24TM indexable insert drill body accepts XC-- 10T304 inserts and is compatible with the Taegutec insert system specified for this family. What tools are required for insert changes? Insert fastening uses a T15 Torx drive and an M4.5×11 screw; these standard tools make insert changes quick and repeatable for the drill body. Is the tool suitable for heavy interrupted cuts? The compact 102 mm overall length and 20 mm nominal diameter provide improved rigidity; however, cutting conditions and insert grade should be selected according to the specific application to manage interrupted cuts. How does the indexable design benefit workshop workflows? By replacing only the worn insert rather than the whole tool, the indexable concept reduces tooling cost per hole and minimises downtime, supporting continuous production and easier stock management. What mounting or shank information is relevant for machine setup? The drill body offers a shank length of 56 mm and a compact overall length of 102 mm, enabling short overhang setups that improve stability and hole accuracy. Manufacturer / Responsible: Teknik Cutting Tools; Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Efficient medium‑depth holemaking with a Ø 20 mm cutting diameter and a 60 mm cutting length, paired with a 25 mm shank for stable clamping; this combination supports consistent cycle times and straightforward tool changes. Order the indexable insert drill U018TM directly via Metav Werkzeuge or consult our specialists for application advice. Indexable Insert Drill U018TM — Teknik Makina, Ø 20 mm, 25 mm shank A Indexable Insert Drill U018TM engineered to deliver flexible, high‑precision holemaking in machining and workshop environments. Ø 20 mm cutting diameter 25 mm shank for secure clamping 60 mm effective cutting length Compatible with Korloy SPMT 0702 inserts Consistent performance for repeatable production The U018TM is designed for reliable, repeatable drilling in series and single‑piece production. Its Ø 20 mm diameter combined with a 60 mm cutting length provides a balanced ratio of stiffness and reach, helping to maintain hole quality across batches. Where process stability matters, the geometry minimises vibration and assists in achieving uniform surface finish and concentricity, which reduces rework and scrap. The tool’s 139 mm overall length gives adequate reach for most fixture setups without compromising rigidity. Secure clamping that reduces runout and tool life variation A robust 25 mm shank and a 56 mm shank length ensure secure clamping in standard toolholders, promoting stable clamping and reduced radial runout. Lower runout translates directly to longer insert life and more predictable cycle times. For production environments that demand dimensional accuracy, this design characteristic supports tighter tolerances and fewer interruptions for adjustments, improving overall operational efficiency. Flexible insert system for fast indexability and cost control Compatibility with Korloy SPMT 0702 inserts enables quick index changes and keeps spare‑part inventories manageable. The indexable insert system means cutting edges can be renewed in seconds rather than replacing an entire drill, delivering clear cost advantages for maintenance and minimising machine downtime. The tool’s modest mass (about 0.353 kg) eases handling during tool set‑up and reduces inertia effects during rapid tool changes. Practical design for workshop and manufacturer use Engineered with production realities in mind, this drill combines a compact form with practical features to fit into mixed workshop fleets. The indexable insert concept supports a wide range of materials and reduction of tooling complexity when paired with suitable inserts from Korloy. For small‑series shops and industrial settings alike, the tool offers an efficient path to precise, repeatable holes without excessive inventory or specialised equipment. Contact Metav Werkzeuge for an application review or to request a detailed technical quote for the Indexable Insert Drill U018TM; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: U018TM Manufacturer: Teknik Makina Compatible inserts: SPMT 0702 Compatible insert manufacturer: Korloy Facts Cutting diameter: 20 mm Shank diameter: 25 mm Cutting length: 60 mm Shank length: 56 mm Overall length: 139 mm Weight: 0.353 kg Features Indexable insert drill Compatible with Korloy SPMT 0702 inserts Files available: 62de7dd60f56dbb4de4dbedc, 62de7ec2148ec6b71020ffa4 FAQ Which inserts fit this drill? The Indexable Insert Drill U018TM is specified for Korloy SPMT 0702 inserts; these inserts provide fast indexability and are widely available for varied cutting conditions. What hole size and depth does it support? This tooling delivers a 20 mm hole diameter with an effective 60 mm cutting length, suitable for medium‑depth drilling tasks in production and workshop settings. What shank and clamping requirements apply? A 25 mm shank with a 56 mm shank length is required for secure clamping; this ensures lower runout and stable cutting behaviour for the U018TM from Teknik Makina. Is the tool suitable for small‑series production? Yes, the indexable insert concept of the U018TM supports quick insert changes and economical edge renewal, making it well suited to small‑series and batch production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a secure, quick‑change system and a robust 20 mm shank for consistent milling performance; compatibility with APMT 0903 indexable inserts keeps tooling costs low and maintenance simple — order directly via Metav Werkzeuge or contact our consultants for tailored advice. Shank milling cutter for APMT 0903 indexable inserts — 20 mm shank, 3 cutting edges (Teknik Makina) A Shank milling cutter designed to accept APMT 0903 indexable inserts for versatile workshop milling tasks and quick insert replacement 20 mm shank diameter Compatible with APMT 0903 inserts Three cutting edges for steady cutting M2.5x5.5 Torx screw, T8 key required Stable clamping and reliable insert seating for uninterrupted production The solid 20 mm shank and balanced geometry ensure a stable tool connection to the spindle, reducing chatter and improving surface quality. Designed around the APMT 0903 insert form, the holder provides predictable cutting behaviour and easy insert indexing. The secure fastening with an M2.5x5.5 Torx screw (T8) maintains seating accuracy during step changes and when re‑setting inserts, which helps to reduce setup time and minimise scrap in serial work. Compact dimensions that suit tight tool magazines and workshop shelves With an overall length of 120 mm and a tool weight of 0.26 kg, the cutter combines reach with compactness for flexible tool‑changer compatibility. The 30 mm cutting height and three cutting edges deliver a good balance between material removal and tool life, allowing workshops to consolidate operations with fewer tool types. This compact footprint supports straightforward inventory management and faster tool changes on the shop floor. Cost efficiency through indexable insert technology Using indexable inserts cuts consumable costs and maintenance downtime compared with brazed or solid cutters. When one edge is worn, the APMT 0903 insert can be rotated or replaced without discarding the entire tool body — a practical advantage for repetitive production runs. The holder’s compatibility with inserts from manufacturers such as Korloy extends sourcing options and simplifies replenishment for purchasing teams. Practical workshop integration and handling The cutter’s simple geometry and standardised fixing mean it integrates easily with existing milling setups. The three‑edge configuration promotes even wear and reduces vibration, while the modest weight aids safe manual handling during tool fitting. Technical staff will appreciate the familiar Torx interface (T8) for quick tightening and the clear compatibility list that limits selection errors during tool assembly. For reliable indexable milling solutions from Teknik Cutting Tools, contact Metav Werkzeuge for expert advice and dependable supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S048TM Manufacturer: Teknik Makina (Teknik Cutting Tools) Brand: Teknik Makina Data Shank diameter: 20 mm Diameter: 20 mm Overall length: 120 mm Cutting height: 30 mm Number of cutting edges: 3 Weight: 0.26 kg Special features For APMT 0903 indexable inserts Compatible with Korloy inserts Torx screw M2.5x5.5 (T8 key) Suitable for quick insert indexing SKU: S048TM FAQ Which indexable inserts fit this cutter? The cutter accepts APMT 0903 indexable inserts; compatibility with brands such as Korloy is indicated for the holder (SKU S048TM). How are the inserts secured? Inserts are fixed with an M2.5x5.5 Torx screw and require a T8 key for tightening, providing reliable seating and repeatable clamping. How many cutting edges does the tool use and what is the benefit? The holder is designed for three cutting edges, which promotes balanced cutting forces and even insert wear for more consistent part quality. What are the key dimensions to check when fitting the tool? Check the 20 mm shank diameter, 120 mm overall length and 30 mm cutting height to ensure compatibility with the machine tool and tool magazine. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact holder that combines a 20 mm shank for secure clamping with a 3‑edge cutting geometry and compatibility with APXT 1003 indexable inserts for consistent, repeatable machining. Order the tool via Metav Werkzeuge or consult Metav's specialists for application advice and reliable delivery from Emmerich. Shank milling cutter S166TM — 20 mm shank, for APXT 1003 indexable inserts (Teknik Makina) The Shank milling cutter S166TM is a robust shank holder engineered to accept APXT 1003 indexable inserts for stable face and slot milling in production and workshop environments 20 mm shank diameter for stable clamping 40 mm effective cutting length 3 cutting edges for smooth chip removal Compatible with APXT 1003 indexable inserts Stable clamping and repeatable tool geometry for consistent results The holder is built around a 20 mm shank, which delivers secure clamping in standard toolholders and minimises vibration during cutting. With a three cutting edge arrangement and a defined 90° cutting angle, the tool provides predictable engagement and steady surface finish across repeated cycles. Use of APXT 1003 indexable inserts reduces machining variability because inserts can be indexed or replaced without regrinding; this keeps setup times low and supports stable process capability in series production. Compatibility with Korloy inserts offers broad availability of grades and geometries for matching cutting conditions. Fast insert changes and low downtime through straightforward fastening Insert replacement is facilitated by an accessible clamping system: the unit is secured using an M2.5x5.5 Torx screw tightened with a T8 key, enabling rapid, tool‑room friendly insert changes. The holder’s overall length of 120 mm and a 40 mm cutting length balance reach and rigidity, while a mass of 0.278 kg keeps handling straightforward during tool setup and magazine loading. These features combine to reduce changeover time and support higher machine utilisation without complex maintenance procedures. Practical application benefits and dependable supply chain Designed for operations that rely on indexable inserts, the cutter supports efficient replacement strategies and predictable consumable costs, helping to lower the cost per component in repetitive milling tasks. The compact design is suitable for face milling, shoulder milling and light slotting where APXT 1003 inserts are specified. Procuring the S166TM through Metav Werkzeuge ensures centralised sourcing and a quality filter for the European market, backed by a broad product range and consistent stock handling at the Emmerich site. For technical specification checks or to secure supply of the S166TM from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S166TM Product name: Shank milling cutter S166TM Description: for APXT 1003 Indexable Inserts Manufacturer: Teknik Makina EClass: 21180806 ETIM: EC011860 Facts Shank diameter: 20 mm Cutting length: 40 mm Overall length: 120 mm Diameter: 20 mm Number of cutting edges: 3 Weight: 0.278 kg Cutting angle: 90° Torx screw: M2.5x5.5 Torx key: T8 Special features Compatible inserts: APXT 1003 Suitable insert supplier: Korloy Files: 62de7eecbd24461b3d5f7a7d, 62de7e5c0f56dbb4de4dbf0f FAQ What inserts are compatible with this holder? The holder accepts APXT 1003 indexable inserts; it is listed as compatible with inserts from Korloy and other suppliers offering the same APXT 1003 geometry. How is the insert secured in the tool? Insert clamping is achieved with an M2.5x5.5 Torx screw tightened using a T8 key, allowing quick replacement and secure fixation of cutting tips. What are the key dimensions to consider for machine setup? Key dimensions include a 20 mm shank diameter, 40 mm effective cutting length and an overall length of 120 mm, which determine reach and clamping requirements for the toolholder. Is the S166TM suitable for series production? The S166TM is engineered for repeatable performance with indexable inserts, offering rapid insert changes and stable geometry that support efficient series production workflows. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust tooling geometry, secure insert clamping and straightforward maintenance for uninterrupted milling operations. Benefit from the tool's 20 mm shank, 70 mm effective cutting length and compatibility with APXT 1003 indexable inserts — order or request technical advice via Metav Werkzeuge. Shaft milling cutter S192TM — 20 mm shank, 3 cutting edges (Teknik Makina) A Shaft milling cutter S192TM engineered for indexable-insert milling, designed to accept APXT 1003 inserts for reliable face and slot milling in industrial production. 20 mm shank diameter 70 mm effective cutting length 3 cutting edges for stable machining Compatible with APXT 1003 Korloy inserts High-performance geometry that raises throughput The tool's engineered geometry and 3 cutting edges deliver stable material removal and consistent chip formation. The solid 20 mm shank provides rigid clamping in standard toolholders, which reduces vibration and improves surface finish. With a 70 mm effective cutting length, the cutter supports longer engagement without sacrificing stiffness, helping to maintain cycle times and reduce the need for frequent rework. These characteristics translate directly into measurable productivity gains on the shop floor: fewer tool changes, more predictable cuts and a better utilisation of machine capacity. Secure indexable-insert system for fast maintenance Designed for use with APXT 1003 indexable inserts from Korloy, the cutter uses a Torx clamping screw (M2.5x5.5) secured with a T8 key to ensure repeatable insert seating and quick replacement. Indexable inserts separate the cutting edge from the body, so worn edges are changed in seconds rather than replacing the entire tool. This results in lower tooling inventory costs and shorter downtime. The robust clamping complements the tool's 90° cutting angle, providing solid face engagement and reliable cutting-edge support during heavy passes. Practical benefits for everyday production workflows With an overall length of 250 mm and a tool weight of 0.623 kg, the cutter balances accessibility with handling convenience during set-up. The combination of compact mass and rigid design simplifies tool handling and reduces clamping errors, while the indexed insert approach reduces machining interruptions. For production planners and workshop supervisors, this means improved line stability and easier spare-parts management: one body, simple insert inventory and straightforward replacement routines — all of which contribute to reduced operational complexity and lower total cost of ownership. Why indexable-insert milling is effective for modern workshops Indexable-insert tooling like this shaft cutter is tailored for repeatability and cost-efficiency. The concept separates the consumable cutting edge from the tool body, enabling consistent tool geometry after each insert change and diminishing the need for precision grinding or resharpening. The S192TM tool body keeps capital expenditure predictable while allowing the operator to maintain high cutting performance through standardised insert grades and clamping practice. For facilities aiming to streamline tooling logistics and maintain high machine utilisation, this system provides a practical, scalable solution. Contact Metav Werkzeuge for tailored technical advice or a specification match for Teknik Makina tools and the S192TM shaft milling cutter Technical Data SKU: S192TM Manufacturer: Teknik Makina Compatible inserts: APXT 1003 (Korloy) Numbers / Facts Shank diameter: 20 mm Effective cutting length: 70 mm Cutting edges: 3 Overall length: 250 mm Weight: 0.623 kg Cutting angle: 90° Special features / Versions For APXT 1003 indexable inserts Compatible with Korloy inserts Torx screw M2.5x5.5 Torx key size: T8 FAQ What insert type does the cutter accept? The shaft milling cutter accepts APXT 1003 indexable inserts; the body is matched to Korloy APXT 1003 grades. How is an insert fastened in the tool? Inserts are clamped with a Torx screw (M2.5x5.5) requiring a T8 key for secure and repeatable seating. What are the primary dimensions to check for toolholder compatibility? Key dimensions are the 20 mm shank diameter and the overall length of 250 mm; verify toolholder clamping and reach for safe operation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the tool's compatibility and robust clamping for reduced downtime and consistent machining results; the combination of a 20 mm shank and a 60 mm cutting length supports deeper engagement while maintaining tool stability. Order the component directly via Metav Werkzeuge or consult the Metav team for integration advice. Shank Cutter S176TM — Indexable insert cutter for APXT 1003, Ø20 mm (Teknik Cutting Tools) A Shank Cutter S176TM designed for heavy-duty indexable milling where secure clamping and repeatable geometry are essential; ideal for workshops and production lines using APXT 1003 indexable inserts. Indexable insert shank cutter Ø20 mm Fits APXT 1003 indexable inserts 3 cutting edges for stable machining Torx clamping with M2.5x5.5 screw Deliver consistent material removal with secure insert mounting The S176TM combines a stable Ø20 mm shank with a three-edge configuration to deliver steady cutting forces and predictable tool behaviour, which reduces vibration and improves surface finish. Compatibility with APXT 1003 indexable inserts makes insert changes straightforward and cost-efficient: worn cutting edges are replaced without sending the whole tool for regrinding, lowering lifecycle costs and machine downtime. The result is faster cycle times and fewer process interruptions in serial milling tasks. Built geometry for repeatability and easy clamp replacement With a 60 mm cutting length and a total length of 150 mm, the tool balances reach and rigidity for many common milling operations. The clamping system uses a Torx screw M2.5x5.5 tightened with a T8 key, ensuring repeatable seat pressure and secure insert retention under load. The three cutting edges produce uniform chip loads that support stable feeds and help extend insert life, while the modest tool weight of 0.345 kg contributes to lower spindle stress during prolonged cycles. Designed for workshop integration and straightforward stocking The cutter is specified for APXT 1003 inserts and lists Korloy as a compatible insert manufacturer, simplifying procurement and inventory management for production and maintenance teams. The modular nature of the system supports rapid insert replacement, which lowers throughput risk in mixed-shop environments. For companies seeking consolidated sourcing, Metav Werkzeuge provides supply continuity from its Emmerich hub and technical accompaniment for selecting matching inserts and clamping components. Discuss integration options with Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to specify the Teknik Cutting Tools S176TM for production use Technical Data Article number: S176TM Product name: Shank cutter for APXT 1003 indexable inserts Brand: Teknik Makina Compatible inserts: APXT 1003 Diameter: 20 mm Shank diameter: 20 mm Cutting length: 60 mm Overall length: 150 mm Number of cutting edges: 3 Weight: 0.345 kg Cutting angle: 90° For APXT 1003 indexable inserts Compatible with Korloy inserts Torx screw: M2.5x5.5 Torx key: T8 SKU: S176TM FAQ Which inserts fit this shank cutter? The S176TM is specified for APXT 1003 indexable inserts; Korloy inserts marked APXT 1003 are compatible. How many cutting edges does the cutter have? The cutter uses 3 cutting edges, providing a balance between chip control and feed rate capability. What is the shank diameter and overall reach? The tool has a 20 mm shank diameter and an overall length of 150 mm, with a cutting length of 60 mm. Which clamping hardware is required for insert fixation? Clamping is achieved with a Torx screw M2.5x5.5, tightened using a T8 key, ensuring secure and repeatable insert seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, indexable solution that combines stable clamping and efficient material removal via its three cutting edges; ideal for routine steel machining where quick insert changes reduce downtime. Order the S457TM directly via Metav Werkzeuge or ask our consultants if needed. S457TM Shank milling cutter — 20 mm shank, for WNMU 0403 indexable inserts (Teknik Makina) The S457TM Shank milling cutter is a precision cutting tool designed for reliable steel machining with WNMU 0403 indexable inserts, offering a practical solution for production and repair workshops. Compatible with WNMU 0403 indexable inserts 20 mm shank for stable clamping Three cutting edges for efficient removal Lightweight 0.29 kg for easy handling High-efficiency cutting with predictable tool life The tool is engineered for steady metal removal rates thanks to its three cutting edges and secure insert seating. Using indexable inserts means that cutting geometry can be restored in seconds by replacing just the insert, which keeps process times low and machining quality consistent. The cutter is certified for the WNMU 0403 insert family and is compatible with ISCAR inserts, so material removal for general steel machining tasks is economical and repeatable without complex regrinding. Stable mounting and straightforward insert fastening A rigid connection between the toolholder and spindle is critical for surface finish and dimensional accuracy; the cutter’s 20 mm shank provides a compact, vibration-resistant interface for most toolholders. Insert clamping is secured with a Torx system (key torx T8) and a dedicated screw (M2.5x5.5), ensuring repeatable seating and minimal play. These features support stable clamping and enable a quick insert change, which reduces set-up time and supports lean production workflows. Practical workshop benefits and manageable handling With an overall length of 120 mm overall length and a mass of only 0.29 kg, the cutter balances reach with good tool stability in short to medium overhang applications. The light weight simplifies manual handling and tool changes, while the geometry minimises the risk of chatter in typical workshop setups. Backed by Teknik Makina, the shank milling cutter S457TM is a pragmatic choice for vendors and maintenance engineers looking for a dependable, easy-to-service indexable solution that keeps machines running. For tailored process advice or to order the Teknik Makina S457TM, contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for prompt assistance and reliable delivery Technical data Article number: S457TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 20 mm Shank diameter (D): 20 mm Overall length: 120 mm Number of cutting edges: 3 Weight: 0.29 kg Special features Compatible inserts: WNMU 0403 (ISCAR) Torx key: T8 Torx screw: M2.5x5.5 Brand: Teknik Makina FAQ What inserts fit this milling cutter? The cutter accepts WNMU 0403 indexable inserts; compatibility with ISCAR inserts is specified for the S457TM shank milling cutter. How is the insert secured? Insert fastening uses a Torx screw (M2.5x5.5) tightened with a torx T8 key to ensure secure and repeatable seating on the S457TM. What is the shank diameter and overall length? The tool has a 20 mm shank diameter and a 120 mm overall length, providing a compact, stable mounting for general workshop applications. Is this cutter suitable for steel work? Yes — the geometry and the use of indexable inserts make the tool well suited for routine steel machining where reliable material removal and quick insert changes are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, shank-mounted solution that combines internal coolant and proven APKT 1003 insert compatibility for consistent chip evacuation and extended tool life; order the cutter directly via Metav Werkzeuge or request guidance from our consultants for integration into production. 20 mm indexable milling cutter S767-2TM — internal coolant, for APKT 1003 inserts (Teknik Makina) The 20 mm indexable milling cutter S767-2TM is a shank-mounted milling tool designed for efficient indexable-insert milling with integrated coolant supply, suited to production and jobbing environments. 20 mm shank diameter for rigid clamping Integrated internal coolant for improved chip control Compatible with APKT 1003 indexable inserts Torx T8 clamping screw M2.5x5.5 for secure fastening Productivity gains through coolant-assisted chip control The S767-2TM is engineered for reliable material removal using a compact design that supports consistent chip evacuation via its internal coolant channel. By directing coolant directly to the cutting edge, the tool reduces heat at the cutting zone and helps prevent built-up edge, which in turn preserves insert life and maintains surface finish. This results in lower tooling costs per part and a steadier production rhythm, making the cutter a pragmatic choice where process stability and long runtimes matter. Secure insert interface and standardised compatibility Built to accept APKT 1003 indexable inserts, the cutter provides a familiar interface for shops that rely on this popular insert geometry. Compatibility with Palbit insert supply ensures a wide aftermarket selection for grades and coatings. The use of a Torx T8 clamping system with an M2.5x5.5 screw delivers repeatable clamping torque and straightforward indexability, supporting fast insert changes and minimal downtime during shift changes or batch swaps. Compact design for easy handling and installation With a 20 mm shank diameter and an overall length of 150 mm, the tool balances reach and rigidity for many common milling set-ups. The 80 mm cutting length and three cutting edges provide a predictable engagement per pass, while the modest weight (0.201 kg) simplifies handling during tool changes and reduces spindle load. The cutter’s shank geometry is compatible with standard toolholders, enabling rapid integration into existing toolchains without special adaptations. Practical application focus for production environments This indexable cutter is intended for general milling operations where insert change speed, coolant delivery and process reliability are priorities. The three cutting edges permit even load distribution and smooth cutting action, which is particularly beneficial in repetitive production runs. For operators seeking a compact, coolant-capable solution that pairs with widely available APKT 1003 inserts, this tool offers a balanced combination of serviceability and predictable performance. Contact Metav Werkzeuge for procurement advice on the Teknik Makina S767-2TM indexable milling cutter with internal coolant and secure Torx clamping; our Emmerich specialists can advise on toolholder pairing and logistics Technical data SKU: S767-2TM Label: 20mm Schaftfräser APKT 1003 L150mm mit Innenkühlung Manufacturer: Teknik Makina Core specifications Diameter: 20 mm Overall length: 150 mm Shank diameter: 20 mm Cutting length: 80 mm Cutting edges: 3 Weight: 0.201 kg Special features Internal coolant: yes Compatible inserts: APKT 1003 Compatible insert manufacturer: Palbit Torx key: T8 Torx screw: M2.5x5.5 FAQ Which inserts fit this cutter? The cutter accepts APKT 1003 indexable inserts; matching grades from Palbit are compatible for a range of cutting conditions. How does the internal coolant improve performance? Direct coolant delivery to the cutting zone reduces heat and helps evacuate chips, which extends insert life and supports more consistent component quality with the S767-2TM. What clamping hardware is required for insert changes? Insert retention uses a Torx T8 key with an M2.5x5.5 clamping screw to ensure repeatable and secure fastening. Is the shank compatible with standard toolholders? The 20 mm shank diameter is intended for standard shank holders; the compact 150 mm overall length aids compatibility in common milling setups. How many cutting edges does the tool provide and what is the benefit? The tool has three cutting edges, which distribute cutting forces evenly and help maintain smooth cutting action during continuous production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precise compatibility and secure coolant supply: the tool's internal coolant and support for LNMX 0402 indexable inserts deliver consistent chip control and extended insert life. Order this cutter directly via Metav Werkzeuge or consult our experts for tailored tooling configurations. Shank milling cutter S091TM — 20 mm, LNMX 0402 compatible (Teknik Makina) A compact shank milling cutter designed for indexable LNMX 0402 inserts, delivering stable cutting performance in short-reach milling operations. 20 mm shank diameter for stable clamping Internal coolant for improved chip evacuation Compatible with LNMX 0402 indexable inserts Five cutting edges for steady material removal Greater productivity through stable cutting and coolant-fed control The 20 mm diameter design combines a compact profile with a 100 mm overall length and a 20 mm cutting length, delivering a stiff, vibration-resistant tool for face and slot milling where short overhang is required. With five cutting edges, the tool distributes cutting forces evenly, which reduces load peaks and improves surface consistency. The integrated internal coolant channel supplies cutting fluid directly to the insert pocket, enhancing chip evacuation and reducing thermal stress on the cutting edge for longer insert life and fewer unplanned stops. Fast insert changes with standardised clamping and clear compatibility Indexable inserts of the LNMX 0402 family are used on the head, enabling economical index changes instead of full-tool replacement. The head is designed for easy securing using a T6 Torx key and the corresponding M1.8x4.1 Torx screw, simplifying maintenance routines in production environments. The tool is specified for use with Korloy-manufactured inserts, ensuring predictable fit and repeatable seating. This modular approach reduces downtime and keeps cutter inventory lean while maintaining consistent cutting geometry. Consistent handling, predictable logistics and workshop readiness Weighing approximately 0.22 kg, the cutter is light enough for rapid changeovers yet engineered for reliable balance during operation. Its standard 20 mm shank enables straightforward mounting in common toolholders, while the compact head geometry supports close-tolerance machining in constrained setups. Supplied by a trusted network, the assembly benefits from straightforward spare-part identification and repeatable assembly steps, making it suitable for small-batch production as well as higher-throughput cells where tool change predictability matters. Contact Metav Werkzeuge for application advice or to configure this Teknik Cutting Tools shank milling cutter to specific production needs and ensure the best insert and coolant setup for each machining task. Technical data Article number: S091TM Product type: Shank milling cutter Designation: for LNMX 0402 Indexable Inserts Core dimensions Diameter: 20 mm Overall length: 100 mm Cutting length: 20 mm Shank diameter: 20 mm Number of cutting edges: 5 Weight: 0.22 kg Features & compatibility Internal coolant: yes Compatible inserts: LNMX 0402 Recommended insert manufacturer: Korloy Torx key: T6 Torx screw: M1.8x4.1 Manufacturer: Teknik Makina FAQ Which inserts fit this cutter? The cutter accepts LNMX 0402 indexable inserts; compatibility is specified for Korloy inserts and standard LNMX 0402 geometries. Is coolant supplied through the tool? Yes, the tool has internal coolant channels to deliver fluid directly to the insert zone for improved chip control. What clamping hardware is required for insert changes? Insert retention uses a T6 Torx key with an M1.8x4.1 Torx screw for secure and repeatable clamping. What are the main dimensions of the cutter? The cutter has a 20 mm diameter, 100 mm overall length and 20 mm cutting length, suitable for short-overhang milling tasks. Which manufacturer produced this tool and what is the SKU? This item is supplied by Teknik Cutting Tools and sold under SKU S091TM; it is distributed via Metav Werkzeuge for European supply. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of 20 mm shank stability, internal coolant and secure insert clamping for predictable milling performance; order the cutter via Metav Werkzeuge or consult our specialists for application-specific guidance. Shank milling cutter S849TM for BOMT 1304 Indexable Inserts — 20 mm shank, internal coolant (Teknik Makina) A Shank milling cutter S849TM built for indexable-insert milling with through-tool coolant and compact overall length for versatile workshop use 20 mm shank diameter Internal coolant supply Compatible with BOMT 1304 inserts Ingersoll-compatible clamping system Reliable rigidity for consistent surface quality The 20 mm shank and compact 90 mm overall length deliver a stable toolholder connection that reduces vibration and runout, which in turn improves repeatability and surface finish in serial milling tasks. With a 40 mm cutting length and two cutting edges, this milling body is designed for steady material removal while keeping clamping forces straightforward to manage. The result is a reduction in scrap and rework costs due to fewer dimensional deviations during long production runs. Optimised coolant flow to extend insert life Equipped with internal coolant, the cutter directs cooling fluid close to the cutting zone to support effective chip evacuation and reduce thermal loading on the cutting edges. This targeted coolant delivery helps maintain cutting-edge geometry and can increase indexable-insert longevity under consistent cutting conditions. For applications requiring reliable heat management, the internal supply is a practical means to protect inserts and maintain cutting performance throughout extended cycles. Fast, secure insert changes minimise downtime Insert retention is secured via a T10 Torx screw (M3.5x8.5), enabling precise, repeatable clamping and quick exchange of BOMT 1304 inserts. The straightforward screw-and-pocket arrangement reduces maintenance time on the shop floor and simplifies spare-part logistics. Combined with the cutter’s modest mass (approx. 0.105 kg), the design supports efficient handling during tool set-up and replacement, helping to keep machine uptime high and throughput consistent. Compatibility and service advantages for production planning The tool is compatible with BOMT 1304 indexable inserts and the clamping geometry matches Ingersoll specifications, allowing straightforward integration into existing tooling inventories. Sourcing the cutter through Metav Werkzeuge provides the benefits of centralised stock, technical filtering and reliable supply from an established European hub. Clear mechanical specifications and standardised fastening components mean fewer special parts and easier procurement planning for production managers. For tailored advice on integrating the Teknik Makina S849TM into specific machining processes or to confirm lead times and availability from Metav Werkzeuge in Emmerich, please contact our technical consultants by email at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data SKU: S849TM Manufacturer: Teknik Makina Product: Shank milling cutter ECLASS: 21180806 Facts Diameter: 20 mm Shank diameter: 20 mm Overall length: 90 mm Cutting length: 40 mm Cutting edges: 2 Weight: 0.105 kg Torx key: T10 Torx screw: M3.5x8.5 Special features Internal coolant (through-tool) For BOMT 1304 indexable inserts Compatible with Ingersoll insert clamping Compact design for stable clamping FAQ Which inserts fit this cutter? The cutter accepts BOMT 1304 indexable inserts; the clamping geometry is compatible with Ingersoll-style insert systems. Is the coolant internal or external? This shank milling cutter features internal coolant, supplying fluid directly through the tool to the cutting zone. What fastening hardware is required for inserts? Inserts are secured with a T10 Torx screw, size M3.5x8.5, ensuring repeatable and secure clamping. How many cutting edges does the tool provide? The tool body is configured with two cutting edges, optimised for stable material removal and straightforward balancing. Can this cutter be used in existing tool holders? With a 20 mm shank diameter and standard clamping profile, the cutter integrates into holders that accept a 20 mm shank and provide adequate axial support. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a combination of secure clamping and rapid insert changes that keep machining cycles efficient and predictable; the 20 mm shank and 45 mm cutting length deliver stable performance for medium-deep milling. Order the tool directly via Metav Werkzeuge or consult the team for application advice. S212TM insert milling cutter — 20 mm shank, for APKT 0903 indexable inserts (Teknik Makina) The S212TM is an insert milling cutter engineered for efficient side milling and pocketing operations using APKT 0903 indexable inserts. 20 mm shank diameter for stable clamping 45 mm cutting length for medium-deep cuts Compatible with APKT 0903 inserts (Walter) Stable clamping for consistent machining results A solid 20 mm shank and a total length of 150 mm overall length provide the mechanical stability required for repeatable milling runs. The tool’s mass (approx. 0.354 kg) and balanced geometry reduce chatter during intermittent cuts, so process windows remain predictable. For production environments this translates into fewer scrapped parts and smoother cycle times, with one clear benefit per setup: improved surface finish without compromising feed rates. Fast insert changes cut downtime Compatibility with APKT 0903 indexable inserts ensures access to widely available grades and geometries. Inserts are secured with an M2.5x7 Torx screw and released with a T8 key for quick replacement; the simple fastening logic reduces changeover time and minimises handling errors. For shops that run multiple part variants, the consequence is straightforward — faster tool service procedures and lower per-part handling costs. Productivity engineered for productive cuts With a 45 mm cutting length and a 90° cutting angle, the cutter is aimed at efficient face and slot milling where axial engagement is moderate and radial engagement varies. The three-edge design supports steady chip removal and makes it easier to maintain cutting parameters across a batch. In plain terms, the geometry converts into a single operational advantage per pass: consistent material removal while preserving insert life. Clear application fit and operational ease Designed for industrial workshops, job shops and maintenance departments, the cutter matches common machining tasks that require reliable insert performance and straightforward tool handling. Its compatibility with Walter-manufactured inserts widens the choice of grades for differing materials and finishes. If further clarification on mounting or insert grade selection is required, Metav Werkzeuge provides application guidance to align the tool’s characteristics with the production objective. For procurement or technical assistance with the Teknik Cutting Tools S212TM insert milling cutter, contact Metav Werkzeuge in Emmerich for fast supply and expert application support at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: S212TM Manufacturer: Teknik Makina Designation: insert milling cutter for APKT 0903 indexable inserts Compatible inserts: APKT 0903 (Walter) ECLASS: 21180806 ETIM: EC011860 Facts Shank diameter: 20 mm Cutting length: 45 mm Diameter: 20 mm Overall length: 150 mm Number of cutting edges: 3 Weight: 0.354 kg Cutting angle: 90° Torx screw: M2.5x7 Torx key size: T8 Special features Compatible with Walter APKT 0903 inserts Fastening with M2.5x7 Torx screw Three cutting edges Designed for insert change efficiency FAQ Which inserts fit this milling cutter? The S212TM accepts APKT 0903 indexable inserts; Walter-compatible insert geometries are supported for flexible grade selection. How are inserts secured and which tool is required? Inserts are fixed with an M2.5x7 Torx screw; a T8 Torx key is used to tighten and release inserts for the S212TM. What are the main dimensions to consider when setting up the tool? Key dimensions for the S212TM are a 20 mm shank diameter, 45 mm cutting length and 150 mm overall length, which determine clamping and reach. How many cutting edges does the tool have and what is the advantage? The S212TM has three cutting edges, supporting steady chip evacuation and balanced cutting forces for stable material removal. Is the S212TM suitable for quick changeovers in a production setting? Yes, the simple Torx fastening and standard APKT 0903 inserts make the S212TM well suited to rapid insert exchange and streamlined tool servicing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the precise combination of a compact 20 mm shank, integrated internal coolant and compatibility with Sandvik R390 11T3 indexable inserts for reliable small-diameter milling. Order the tool directly via Metav Werkzeuge or consult our specialists for integration into production setups. Shank milling cutter S592-3TM — 20 mm shank, internal coolant, for R390 11T3 indexable inserts (Teknik Makina) The Shank milling cutter S592-3TM is a compact milling body designed for use with R390 11T3 indexable inserts, offering internal coolant delivery and a slim 20 mm shank for precision finishing and light shoulder milling applications. 20 mm shank diameter Internal coolant for chip control Compatible with Sandvik R390 11T3 inserts High-performance small-diameter milling for consistent results The tool delivers repeatable performance in tight-tolerance milling tasks thanks to its 20 mm shank and a total length of 120 mm, which balance accessibility with rigidity. The cutter body accepts the widely used R390 11T3 indexable inserts, enabling quick insert changes and predictable cutting behaviour. With three cutting edges, the tool maintains stable chip load and smooth cutting action, making it suitable for finishing passes or light shoulder operations where vibration must be minimised. The compact geometry reduces overhang while the robust construction supports high-speed machining where appropriate. Effective coolant routing extends tool life and improves surface quality Integrated internal coolant directs cutting fluid to the cutter-to-insert interface, improving chip evacuation, reducing heat at the cutting zone and prolonging insert life. This feature helps to maintain consistent surface finish and reduces the need for frequent index changes during longer runs. For production environments aiming to reduce downtime, the coolant feed lowers thermal stress on the insert and tool body, which contributes to lower tooling costs per component and fewer unscheduled interruptions. Practical compatibility and service-friendly design Designed for compatibility with Sandvik R390 11T3 inserts, the cutter simplifies stock keeping and tool setup across mixed-machine fleets. The tool uses an M2.5x7 fixing screw with a Torx T8 interface, enabling secure clamping and quick replacement with standard workshop tools. The 40 mm cutting length provides sufficient engagement for many common operations without excessive overhang, and the lightweight construction (approx. 0.271 kg) makes handling and presetting straightforward on tool-room equipment. The combination of standard insert format and user-friendly fastening promotes efficient changeovers and predictable process stability. For supply and technical advice on the Teknik Makina S592-3TM with internal coolant and Sandvik R390 11T3 compatibility, contact Metav Werkzeuge for personalised recommendations and reliable dispatch from Emmerich Technical data Article number: S592-3TM Product type: Shank milling cutter Manufacturer: Teknik Makina Core data Diameter: 20 mm Overall length: 120 mm Shank diameter: 20 mm Cutting length: 40 mm Cutting edges: 3 Weight: 0.271 kg ECLASS: 21180806 Special features Internal coolant Compatible with R390 11T3 indexable inserts (Sandvik) Fixing screw: M2.5x7 (Torx T8) Torx key: T8 FAQ Is this cutter compatible with Sandvik R390 11T3 inserts? Yes. The S592-3TM milling body is designed for use with R390 11T3 indexable inserts from Sandvik, ensuring standard insert interchangeability and consistent mounting. Does the tool provide internal cooling? Yes. The cutter includes an internal coolant channel that directs fluid to the cutting zone for improved chip evacuation and thermal control during machining. What are the shank and overall dimensions of the tool? The tool features a 20 mm shank diameter and a 120 mm overall length, with a 40 mm cutting length suitable for many finishing and light shoulder-milling tasks. How many cutting edges does the cutter have and what is the benefit? The cutter has three cutting edges, which helps maintain a stable chip load, smoother cutting action and predictable material removal for fine surface finishes. Which screw and key are required to mount the inserts? Mounting uses an M2.5x7 screw secured with a Torx T8 key, providing secure clamping and straightforward insert changes. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid clamping solution with precise geometry and proven compatibility with RCMT indexable inserts for reliable turning cycles; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. Clamping holder SRGCL 2020 — SRGC for RCMT indexable inserts, left‑hand, 30° lead The Clamping holder SRGCL 2020 is a left‑hand turning holder engineered for use with RCMT 10T3 indexable inserts, combining secure insert retention with predictable chip flow in medium‑duty turning operations. SRGCL 2020 for RCMT 10T3 inserts Left‑hand configuration, 30° lead angle 20 × 20 mm shank, 25 mm cutting head width 125 mm overall length, 0.41 kg mass Reliable clamping for consistent machining results The SRGCL 2020 is designed as a robust toolholder that prioritises secure insert retention and repeatability. The SRGC clamping style keeps the insert firmly seated, reducing micro‑movement under load and lowering the risk of chatter. With a 20 × 20 mm shank and an overall length of 125 mm, the holder balances rigidity and accessibility at the turret. These dimensions make it suitable for general turning operations where tool overhang must be minimised to preserve surface finish and extend insert life. The proven compatibility with RCMT 10T3 inserts ensures straightforward toolset standardisation across batches and reduces setup complexity. Geometry tailored for predictable cutting and chip control A left‑hand orientation combined with a 30° lead angle gives this holder definite cutting characteristics: it encourages controlled cut entry and directs chips away from the workpiece, which is particularly useful in batch turning where cycle stability matters. The 25 mm cutting head width and 25 mm cutting height are optimised to match RCMT geometry so that insert seating and edge projection produce consistent cutting engagement. For operators, this translates into fewer interruptions for tool checks and more dependable cycle times — a rational benefit that improves throughput and reduces scrap rates. Workshop integration and handling benefits Handling and mounting are simplified by the standard ISO designation SRGCL 2020 and the K10 shank style reference. At 0.41 kg, the holder is compact enough for fast turret indexing yet heavy enough to contribute to damping. The left‑hand configuration should be specified at the point of order to ensure turret compatibility. From a shopfloor perspective, the holder supports straightforward insert swaps and predictable tool offsets, which helps maintain setup consistency across operators and shifts. This practical approach supports efficient production planning and reduces machine downtime. Why this choice supports quality and availability Selecting this SRGC‑style holder aligns with a pragmatic production strategy: match the holder to RCMT 10T3 inserts already in use, standardise on the ISO SRGCL 2020 designation, and benefit from a compact, left‑hand geometry that improves chip evacuation. The result is a toolholder that contributes to consistent component quality and easier inventory management. As a trusted distributor, Metav Werkzeuge supplies products that are vetted for the European market and supported by technical advice when required. For workshop integration, request the SRGCL 2020 through Metav Werkzeuge to ensure the correct left‑hand configuration and insert compatibility — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application details and availability Technical data Article number: D283TM Manufacturer: Teknik Makina ISO designation: SRGCL 2020 Compatible inserts: RCMT 10T3 Facts Overall length: 125 mm Shank size: 20 × 20 mm Cutting head width: 25 mm Cutting height: 25 mm Holder height: 20 mm Cutting angle: 30° Weight: 0.41 kg Special features Left‑hand turning configuration K10 shank designation For RCMT 10T3 indexable inserts SRGC clamping mechanism FAQ Which inserts fit this holder? The holder is specified for RCMT 10T3 indexable inserts; the SRGCL 2020 geometry matches that insert form for secure seating and correct edge projection. Is this holder for left or right turning? This unit is a left‑hand configuration with a 30° lead angle, intended for left‑hand turning operations. What shank size and length does it require? The shank is 20 × 20 mm and the overall length is 125 mm, making it suited to turrets that accept square shanks of this size. Can the holder be used for finishing cuts? With its rigid clamping and modest overhang, the holder supports fine finishing passes when combined with the appropriate RCMT 10T3 grades and correct cutting parameters. What are the weight and physical dimensions to consider for turret setup? Weight is 0.41 kg; key dimensions include 20 × 20 mm shank, 25 mm cutting head width and 125 mm overall length, which should be checked against turret clearance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Robust clamping and precise 30° cutting geometry combine to deliver reliable chip control and repeatable turning; the compact SRGCL 2020 form factor (125 mm overall length) and compatibility with RCMT 1204 inserts reduce setup complexity and spare-part variety. Order the clamping holder directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. Klemmhalter — SRGC for RCMT Indexable Inserts (left‑hand, 30° cutting angle) by Teknik Makina The SRGC for RCMT Indexable Inserts is a left‑hand clamping holder engineered for secure turning operations with RCMT 1204 inserts and a 30° cutting geometry, suitable for workshop and production turning. Left‑hand orientation for turning operations Compatible with RCMT 1204 inserts 30° cutting angle for controlled chip formation Compact SRGCL 2020 form, 125 mm overall length Reliable clamping for consistent turning results A firm clamp interface and the designated geometry yield repeatable tool positioning and reduced vibration during operation. The left‑hand orientation combined with the 30° cutting angle supports predictable chip flow and improved surface finish in interrupted and continuous cuts. Compatibility with standard RCMT triangular inserts simplifies tooling logistics and helps maintain cycle times, while the solid construction contributes to dimensional stability across batch runs. Compact form for straightforward integration into toolposts The holder follows the SRGCL 2020 profile so it fits many common post designs and keeps overhang low. Key dimensions—125 mm overall length, 25 mm head width and 20 mm holder height—balance reach and rigidity, and the modest mass of 0.422 kg minimises inertia without compromising stability. The shank/interface reference K12 denotes the connection used for mounting and helps planners match the holder to existing tool systems with little rework. Productivity gains through reduced setup and clear compatibility Designed for practicality, this clamping holder accepts the widely used RCMT 1204 inserts, which lowers inventory diversity and speeds changeovers. The left‑hand configuration means fewer operations require orientation changes, conserving machine time and simplifying programming. For operations seeking a compact, dependable solution for finishing and general turning, the holder’s geometry and SRGCL 2020 form offer a pragmatic combination of rigidity and accessibility that supports higher throughput and consistent component quality. For tailored compatibility checks and to secure supply of Teknik Cutting Tools SRGCL 2020 left‑hand clamping holders, contact Metav Werkzeuge in Emmerich for expert advice and dependable delivery Technical data SKU: D281TM Designation: Klemmhalter — SRGC for RCMT Indexable Inserts ISO designation: SRGCL 2020 Manufacturer: Teknik Makina Facts Overall length: 125 mm Holder height: 20 mm Head width: 25 mm Cutting height: 25 mm Weight: 0.422 kg Cutting angle: 30° Cutting direction: left Materials & compatibility Compatible with RCMT 1204 indexable inserts Shank / mounting interface: K12 Designed for turning operations with left‑hand orientation FAQ Which inserts fit this clamping holder? The clamping holder is specified for RCMT 1204 indexable inserts; the geometry and clamp position are matched to that insert form for secure seating and reliable repeatability. Is this holder suitable for right‑hand turning? This version is produced for left‑hand cutting; for right‑hand applications select the corresponding orientation or a right‑hand variant. What are the key mounting dimensions to check? Check the 125 mm overall length, 25 mm head width and the K12 shank interface when matching the holder to existing toolposts or adaptors. How does the 30° cutting angle affect machining? A 30° cutting angle optimises chip evacuation and cutting forces for many turning tasks, helping to improve surface finish and extend insert life under typical feed and depth conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Precise parting and dependable clamping come together with a compact 16 mm shank and a slim 2 mm cutting width, delivering stable parting performance and repeatable groove quality; order the parting clamp holder directly via Metav Werkzeuge or consult the team for technical clarification. Parting Clamp Holder K679TM — 16 mm shank, compatible with ZCC 2C ZT.D inserts by Teknik Makina The Parting Clamp Holder K679TM is a purpose-built parting tool holder for turning operations, designed for machines accepting a 16 mm shank and optimised for narrow parting and grooving tasks. 16 mm shank for standard toolholders 180 mm overall length for stable reach Compatible with ZCC 2C ZT.D inserts 2 mm cutting width for narrow parting cuts Engineered for stable, repeatable parting results The holder is engineered to provide a rigid mounting with a 16 mm shank and 180 mm overall length, which together reduce deflection during cut-off and grooving operations. A reduced cutting kerf of 2 mm means material waste is minimised while machine forces are kept lower, improving cycle consistency. The combination of compact mass and calculated geometry aids vibration damping and contributes to an even tool life, supporting continuous production where predictable results matter. Compatibility that reduces tooling complexity Designed to work with ZCC 2C ZT.D inserts, the clamp holder simplifies tool inventory and streamlines reorder processes by using a widely available insert format. The holder accepts a shank designated S16Q, aligning with common ISO shank standards and facilitating straightforward integration into existing turret setups. Clear compatibility reduces decision time when configuring turning stations and helps maintain uptime through easy replacement of consumables. Secure clamping and practical workshop handling The clamping design secures the cutting insert reliably for consistent cutting geometry and repeatable finish. The 35 mm cutting height and controlled insert placement ensure stable chip formation in parting operations, while the overall mass of 0.446 kg keeps the tool manageable during mounting and alignment. Where operators require quick set-up, the holder’s form factor and standard dimensions make alignment and repeatability easier on conventional lathes. Where this holder brings value on the shop floor Ideal for workshops that focus on efficient parting-off and grooving in serial turning, the holder supports narrow-section work and reduces cycle scrap through its 2 mm kerf capability and robust support. The compact design is suited to close-quarter machining where space is limited but rigidity remains essential. By pairing established insert systems with a standard shank and clear dimensional data, the holder helps purchasing and production planners make fast, low-risk tooling decisions. For specification checks or to secure supply of the Teknik Makina Parting Clamp Holder K679TM, contact Metav Werkzeuge for tailored procurement and advice from Emmerich’s precision specialists. Technical data Article number: K679TM Brand: Teknik Makina Type: Parting clamp holder Compatible inserts: ZCC 2C ZT.D Shank designation ISO: S16Q Core dimensions Shank diameter: 16 mm Overall length: 180 mm Diameter: 20 mm Cutting height: 35 mm Cutting width: 2 mm Weight: 0.446 kg Features and compatibility Suitable for parting and grooving applications Accepts ZCC 2C ZT.D insert types Shank format aligns with S16Q standard SKU: K679TM FAQ What shank size is required for this holder? The holder requires a 16 mm shank connection; the shank diameter is specified as 16 mm for the K679TM parting clamp holder. Which inserts fit this clamp holder? The clamp holder is compatible with ZCC 2C ZT.D inserts, offering a standard option for parting and grooving. What is the overall length and how does it affect stability? The overall length is 180 mm; this length provides a balance between reach and rigidity for stable parting operations. How wide is the cutting kerf achievable with this holder? The cutting width is 2 mm, enabling narrow parting cuts and reduced material loss. What is the weight of the tool and does it affect handling? The tool weighs 0.446 kg, keeping it light enough for easy handling while retaining sufficient mass for stable mounting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise, space‑saving parting with a combination of 2 mm cutting width and a maximum 18 mm plunge depth for controlled material separation; the compact design and standard ISO 2020 seating ensure reliable clamping and reduced vibration in serial turning, while supply and advice are available directly from Metav Werkzeuge for a smooth procurement process. Parting clamp holder — 2 mm cutting width, right‑hand orientation by Teknik Makina The parting clamp holder is designed for precision parting and grooving on lathes, offering a narrow cut profile and robust clamping for repeatable separation operations 2 mm cutting width Max 18 mm plunge depth Compatible with 2C DGN inserts Right‑hand cutting orientation Consistent, economical parting for production workflows The compact toolholder achieves narrow kerfs with a 2 mm cutting width, which reduces material waste and minimises cycle times when parts are parted off. The 18 mm plunge depth provides a controlled maximum engagement, suitable for most light‑to‑medium turning tasks, and the right‑hand cutting geometry matches standard lathe setups for uninterrupted production. These measurable characteristics deliver a quantifiable improvement in throughput and repeatability for shops aiming to optimise scrap and machining time. Stable clamping and clear compatibility for fewer setup issues With a 20 mm clamping height and a 20 mm head width, the holder provides a firm seat for the insert and resists lateral movement during cut‑off operations. The seating is prepared for the ISO 2020 insert size and accepts the 2C DGN indexable plates, including those from ISCAR, simplifying tool sourcing and changeover. The overall length of 125 mm gives a balanced reach while the modest mass of 0.398 kg helps to limit centrifugal forces and chatter on light‑duty spindles. Practical use and application guidance for everyday turning This clamp holder is suited to routine parting, grooving and cut‑off tasks in small to medium workshops and industrial turning centres. The right‑hand orientation means the insert faces the workpiece in a conventional direction for most turning machines; pairing the holder with the recommended 2C DGN plates will ensure predictable chip formation and surface finish. For operators new to indexable parting inserts, the ISO designation identifies the correct insert geometry and thickness for safe, consistent mounting. Reliable supply and workshop support to keep production running Sourced from a specialist tooling supplier, the holder benefits from straightforward stock management and clear technical specifications, reducing the risk of incorrect ordering. Metav’s role as a European quality filter ensures that parts shipped from Emmerich meet inspection criteria before dispatch, supporting uninterrupted workshop operation. For bespoke tool lists or to confirm compatibility with a particular lathe setup, concise technical advice is available to assist specification decisions. For dependable parting performance choose the Teknik Makina parting clamp holder and contact Metav Werkzeuge for procurement and technical clarification via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: D754TM Manufacturer: Teknik Makina Product: Parting clamp holder Facts Cutting width: 2 mm Max plunge depth: 18 mm Overall length: 125 mm Clamping height: 20 mm Head width: 20 mm Holder width: 20 mm Weight: 0.398 kg Cutting direction: right Special features Compatible with 2C DGN inserts Suitable for ISCAR insert types ISO designation: 2020 Bore‑bar designation: 2C‑R DGN FAQ What insert type fits this holder? The holder accepts 2C DGN indexable inserts; the seating corresponds to ISO 2020 dimensions, ensuring compatibility with standard 2C DGN plates. Can this holder be used for left‑hand operations? This specific clamp holder is manufactured with a right‑hand cutting orientation and is intended for conventional right‑hand parting operations. Which manufacturers’ inserts are suitable? The toolholder is compatible with inserts from ISCAR and other suppliers offering 2C DGN plates that conform to the ISO 2020 specification. What is the maximum effective plunge depth? The holder provides a maximum plunge depth of 18 mm, which defines the safe engagement for parting cuts. Is the overall length suitable for small lathes? With an overall length of 125 mm and a modest weight, the holder is suitable for small to medium lathes where compact tool overhang is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact dimensions and accurate clamping for reliable parting operations: the holder's 20 x 20 mm square shank and 3 mm cutting width deliver rigidity and clean separation with minimal chip interference. Order the parting clamping holder directly via Metav Werkzeuge or consult the technical advisors for compatibility and delivery. Parting clamping holder D866TM – 20 x 20 mm shank, 3 mm cutting width (Teknik Makina) The Parting clamping holder D866TM is a compact tool holder designed for precision parting and grooving tasks in turning applications, compatible with GX24 indexable inserts. 20 x 20 mm square shank 3 mm cutting width for narrow grooves Max parting depth 20 mm Compatible with Walter GX24 inserts Increased stability from a compact square shank The holder is built around a 20 x 20 mm square shank with an ISO 2020 designation, providing a rigid interface to standard tool posts and turrets. This compact format reduces overhang and improves torsional resistance, which translates into better surface finish and longer insert life when compared with longer, less rigid set-ups. The modest mass also makes tool changes straightforward while maintaining the clamping stability required for repeatable parting operations. Accurate parting with a narrow cutting width A 3 mm cutting width and a maximum parting depth of 20 mm enable precise separation on small-to-medium turned parts. The narrow kerf reduces material waste and lowers required cutting forces, which helps to limit vibration and heat build-up. For applications where close tolerances and minimal burrs are essential, this holder offers a concentrated capability that improves process reliability without the need for specialised equipment. Seamless integration with GX24 insert systems Designed for use with GX24 indexable inserts and noted as compatible with Walter insert geometries, the clamping system aligns with common industry standards to simplify procurement and inventory. The specification also references a compatible bar designation 3C GX24, which aids in matching the holder with existing boring bars and insert stocks. Integration into a proven insert family reduces tooling complexity and shortens set-up times. Ergonomic length and dependable handling With an overall length of 125 mm and a weight of 0.395 kg, the holder balances accessibility at the tool post with manageable handling during changeovers. The clamping design secures the insert firmly, promoting stable machining even at elevated feed rates appropriate for parting. The compact footprint supports close-fixture work and helps to maintain clearances on multi-tool turrets. For precise parting with Teknik Makina's D866TM, contact Metav Werkzeuge in Emmerich for product advice and reliable supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: D866TM Manufacturer: Teknik Makina Designation: Parting clamping holder Dimensions & weight Shank height: 20 mm Shank width: 20 mm Cutting-head width: 20 mm Cutting width: 3 mm Max parting depth: 20 mm Overall length: 125 mm Weight: 0.395 kg Compatibility & standards Compatible indexable inserts: GX24 Suitable insert manufacturer: Walter ISO designation: 2020 Boring bar designation: 3C GX24 FAQ What is the maximum parting depth for this holder? The holder supports a maximum parting depth of 20 mm as specified for the D866TM parting clamping holder. Which inserts fit this tool holder? This holder is compatible with GX24 indexable inserts and specifically noted as suitable for Walter GX24 styles. What are the shank dimensions and ISO designation? The shank measures 20 x 20 mm and corresponds to an ISO 2020 toolholder format. How long is the holder and how heavy is it? The overall length is 125 mm and the mass is approximately 0.395 kg, offering a compact and manageable tool geometry. Is this holder suitable for precision, small-diameter parting? Yes; the 3 mm cutting width and rigid 20 x 20 mm shank make it well suited to precise parting tasks on small to mid-sized components. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, left‑hand parting solution that combines precise clamping, compatibility with Korloy inserts and compact dimensions to keep changeover times low and production steady. Order the parting holder directly via Metav Werkzeuge or consult our specialists for application advice. Parting clamp holder D614TM by Teknik Cutting Tools — left‑hand cut, for 3C MGM inserts A left‑hand parting clamp holder designed for precise grooving and parting tasks with 3C MGM format inserts Left‑hand cutting orientation Compatible with 3C MGM insert format Shank dimensions 20 x 20 mm 125 mm overall length, 0.407 kg Optimised for reliable left‑hand parting performance The D614TM is a compact parting clamp holder engineered for consistent left‑hand cutting operations. Its clamping concept secures 3C MGM style inserts—common in a wide range of turning applications—so tool retention is stable even under intermittent loads. The holder’s geometry supports controlled chip formation and repeatable positioning, which reduces setup time and contributes to a steady production rate. By using a standard insert format, the toolholder helps streamline spare parts and insert sourcing. Clear specifications that aid planning and setup Critical dimensions are provided to support integration into existing tool posts and tool change routines: a 20 x 20 mm shank profile and 125 mm overall length provide a compact footprint while maintaining sufficient reach for most grooving tasks. The 3 mm cutting width defines the maximum slot size achievable with the fitted insert, and the 18 mm maximum parting depth indicates the maximal engagement of the parting blade before stability or interference becomes a concern. These measurable values assist process planners to determine clearances and machining strategies without guesswork. Compact handling and quick tool changes for efficient workflows Weighing just 0.407 kg, the holder remains easy to handle during tool set‑up and changeovers, while its clamping bar reference 3C‑L MGM ensures compatibility with matched tool bars or adaptors. A standard ISO 2020 designation simplifies the selection of replacement holders or spare parts across suppliers, which supports uninterrupted production and reduces inventory complexity. Stable clamping and defined interfaces contribute to reduced vibration and improved surface finish in many parting operations. Suited to workshop integration and supply confidence The holder is supplied for use with inserts from established manufacturers such as Korloy, enabling users to select grades and geometries appropriate for their material and finish requirements. As part of a broader offering from Metav Werkzeuge, the D614TM benefits from distribution and advisory support that helps workshops consolidate tool choices and maintain predictable supply chains. Choosing standardised tool interfaces helps reduce administrative overhead and fosters reliable machining outcomes. Contact Metav Werkzeuge for tailored application guidance and specify the Teknik Cutting Tools parting clamp holder D614TM to ensure the correct left‑hand solution for your turning operations Technical data Article number: D614TM Manufacturer: Teknik Makina eClass: 21181005 Facts Shank height: 20 mm Shank width: 20 mm Cutting width: 3 mm Max parting depth: 18 mm Overall length: 125 mm Weight: 0.407 kg Special features Compatible inserts: 3C MGM Suitable for inserts by Korloy ISO designation: 2020 Clamping bar designation: 3C‑L MGM Cutting direction: left FAQ What insert format does this holder accept? The holder is designed for the 3C MGM insert format and is compatible with inserts supplied by Korloy. What cutting direction is the D614TM built for? The D614TM is manufactured for left‑hand cutting operations and should be mounted accordingly on the turret. Which shank size is required for mounting? A 20 x 20 mm shank profile is specified for secure mounting in compatible tool posts. How deep can the parting blade engage? The holder supports a maximum parting or engagement depth of 18 mm, defined by the blade and holder geometry. Is the holder suitable for standardised tool setups? Yes. The holder carries an ISO 2020 designation and the clamping bar reference 3C‑L MGM, which aids interoperability with standard tool systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise 3 mm cutting width and 18 mm maximum cutting depth to achieve consistent grooving and parting results, while the compact 20 x 20 mm shank and 125 mm overall length simplify setup and storage; order the tool through Metav Werkzeuge or consult the Metav team for application advice. Grooving clamp holder — 3 mm cutting width, 18 mm max depth (Teknik Makina) A grooving clamp holder engineered for right-hand parting and grooving applications on lathes, designed to accept ISO 2020 indexable inserts from Horn for secure, repeatable cutting. 3 mm cutting width for fine grooves Max 18 mm cutting depth Right-hand holder, ISO 2020 insert fit 20 x 20 mm shank, 125 mm overall length Precision and reliable cutting for turn-milling tasks This compact toolholder is designed to deliver predictable performance where tight tolerances matter. With a defined 3 mm cutting width and 18 mm maximum cutting depth, the holder enables controlled material removal for narrow grooves and parting operations. The right-hand cutting orientation and the ISO 2020 insert interface provide a standardised solution that integrates with established insert families, reducing the need for custom tooling. Engineers benefit from a predictable cutting geometry that supports process planning and repeatability, while production managers gain a tool that helps reduce scrap and rework in repetitive turning tasks. Secure clamping and compact design for stable machining Clamping stability is essential for groove accuracy; the holder’s 20 x 20 mm shank and robust clamp arrangement deliver the rigidity required for consistent chip formation. At an overall length of 125 mm and a mass of 0.407 kg, the design balances reach with vibration control, improving surface finish and tool life. Compatibility with Horn insert geometries (ISO 2020) simplifies insert procurement and replacement, enabling quick changeovers and minimal downtime. The compact profile also makes integration straightforward on small to mid-sized lathes where space and clearance are constrained. Practical benefits for workshop efficiency and setup Adoption of a standardised clamp holder streamlines set-up and inventory. The use of common ISO inserts and a right-hand cutting direction reduces the variety of spares needed, and the repeatable clamp mechanism shortens changeover times. For workshops focused on throughput, the holder’s measured dimensions and familiar insert interface support reproducible set-ups and fewer interventions at the machine. Additionally, the clear numerical specifications—3 mm width, 18 mm depth, 20 x 20 mm shank—allow straightforward programming of process parameters and easier documentation for quality records. Compatibility, mounting and recommended applications The holder is specified to work with the tool shank designation 3C-R S224, ensuring mechanical match to common boring-bar adaptors and tool posts. Its ISO 2020 insert seat accepts a variety of Horn-part inserts suitable for grooving and parting operations, enabling selection of chipbreaker and grade according to the workpiece material and cutting conditions. The compact geometry and right-hand orientation make the holder particularly suitable for fine grooving, narrow-slot cutting and controlled parting-off where a narrow kerf is required. For reliable grooving operations from a trusted precision partner, contact Metav Werkzeuge for tailored advice and swift supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: D704TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina Cutting direction: right Cutting width: 3 mm Max cutting depth: 18 mm Shank height: 20 mm Cutting head width: 20 mm Holder width: 20 mm Overall length: 125 mm Weight: 0.407 kg Compatible insert manufacturer: Horn ISO insert designation: 2020 Mounting/bores bar designation: 3C-R S224 Facts Cutting width: 3 mm Maximum cutting depth: 18 mm Shank size: 20 x 20 mm Overall length: 125 mm Weight: 0.407 kg Special features Right-hand cutting orientation ISO 2020 insert interface Compatible with Horn indexable inserts Compact 125 mm overall length Design optimised for grooving and parting FAQ What insert size does the holder accept? The grooving clamp holder accepts ISO 2020 indexable inserts; compatible inserts from Horn are recommended for correct seat fit and secure clamping. What is the maximum cutting depth for this tool? The holder is specified for a maximum cutting depth of 18 mm, enabling deeper grooving where required while maintaining stability. Which shank dimensions should the toolpost support? The tool requires a 20 x 20 mm shank seat and the overall length is 125 mm; ensure the toolpost or adaptor accommodates these dimensions. Is the holder suitable for left-hand cutting applications? This specific model is configured for right-hand cutting; for left-hand operations a corresponding left-hand variant should be selected. How does the holder improve set-up times? Standardised ISO 2020 inserts and a compact clamp design reduce insert variety and permit faster replacements, helping to shorten machine downtime and set-up cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, right-hand parting and grooving solution that combines secure clamping, Korloy insert compatibility and a 4 mm cutting width for consistent production results — order via Metav Werkzeuge or ask their consultants for application support. Parting tool holder D676TM – right-hand grooving holder with 4 mm cutting width A compact parting tool holder D676TM designed for right-hand turning operations; suited to standard lathe setups and compatible with Korloy 4C MGM inserts for efficient parting and narrow-groove work Right-hand cutting direction 4 mm cutting width for narrow grooves Compatible with Korloy 4C MGM inserts 20 mm cutting-head width for stable support Stable clamping for precise grooving A robust clamping concept delivers stable clamping and repeatable results in parting and grooving tasks. The 20 mm cutting-head width and ISO 2020 shank format translate into reduced chatter and improved surface finish, which benefits cycle-time consistency on serial production runs. Built with a compact 125 mm overall length and a weight of 0.408 kg, the design keeps the centre of mass close to the toolpost, lowering dynamic loads on the lathe and helping maintain tool life and insert integrity during high-frequency operations. Reduced tooling complexity through insert compatibility Compatibility with Korloy 4C MGM inserts simplifies tooling management and cuts down on spare-part variety. The holder’s 4 mm cutting width is aimed at narrow groove and parting operations where precise chip control matters; using a standard insert family means faster changeovers and predictable cutting performance. For production environments that place a premium on uptime, the ability to accept widely available inserts reduces procurement overhead and shortens maintenance intervals. Designed for efficient, right-hand machining on modern lathes The holder supports a right-hand cutting direction and offers a maximum grooving depth of 18 mm, allowing confident engagement in routine to moderately deep parting tasks. The 125 mm overall length provides good reach without excessive overhang, while the unit’s modest mass contributes to low vibration transmission. Together these attributes help deliver consistent chip breakage and smoother operation on CNC and conventional lathes, improving throughput and lowering rejects in repetitive workflows. Contact Metav Werkzeuge for tailored advice on the D676TM parting tool holder and to secure reliable supply — Metav Werkzeuge can advise on inserts, toolpost setup and compatibility; eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical Data Article number: D676TM Manufacturer: Teknik Makina Brand: Teknik Cutting Tools Facts Weight: 0.408 kg Overall length: 125 mm Cutting-head width: 20 mm Cutting width: 4 mm Maximum grooving depth: 18 mm Cutting direction: right Special features ISO shank designation: 2020 Compatible inserts: 4C MGM Compatible insert manufacturer: Korloy Shank/holder designation: 4C-R MGM Compact design for reduced overhang FAQ Which inserts fit this holder? The D676TM accepts Korloy 4C MGM inserts; the compatibility enables straightforward replacement with standard Korloy parting/grooving plates. Is the holder for right- or left-hand cutting? This grooving holder is configured for right-hand cutting, matching the specified cutting-direction parameter for typical lathe setups. What is the maximum grooving depth? The maximum stech (grooving) depth for the D676TM is 18 mm, enabling confident engagement for many parting and grooving tasks. What are the key dimensions to check for toolpost mounting? Important mounting references are the ISO 2020 shank format and the 125 mm overall length; these determine clearance and overhang for the toolpost. Can the holder be used for repeated production runs? Yes — the holder’s stable clamping and compatibility with standard Korloy inserts support repeatable performance suitable for serial production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Efficient internal turning and reliable insert clamping result from the combination of a compact 16 mm shank diameter and compatibility with VCMT 1103 indexable inserts; the 107.5° cutting angle and 180 mm reach support stable machining with reduced vibration. Order the S16Q SVQCR boring bar directly via Metav Werkzeuge or consult the Metav team for technical guidance. S16Q SVQCR Boring Bar – SVQC for VCMT 1103 Inserts, 16 mm Shank (Teknik Makina) The S16Q SVQCR is a right-hand SVQC boring bar designed for internal turning with VCMT 1103 indexable inserts, offering a compact 16 mm shank for standard toolholders. Right-hand SVQC geometry for secure clamping Compatible with VCMT 1103 indexable inserts 16 mm shank diameter for standard toolholders 180 mm overall length for deep internal reach Improved stability and repeatable accuracy for internal turning The S16Q SVQCR combines a 16 mm shank diameter with a balanced, lightweight design to reduce overhang-induced vibration and enhance surface finish in turning operations. The SVQC clamping arrangement secures the insert reliably, which translates into consistent tool life and fewer adjustments on the machine. The 107.5° cutting angle is optimised to support predictable chip flow and modest cutting forces, making the tool a pragmatic choice where repeatability and process stability are priorities. Fast insert changes and broad workshop compatibility Designed to accept VCMT 1103 indexable inserts, the bar simplifies insert replacement and set-up times, enabling quicker changeovers and reduced downtime in batch production. The SVQC clamping geometry ensures a firm seat for the insert, diminishing play and improving dimensional stability. With a right-hand cutting orientation, integration into existing turning programmes and tool stations is straightforward, supporting standard machining routines without the need for special adapters. Practical dimensions for medium-depth boring tasks A 20 mm tool diameter and 180 mm overall length provide sufficient reach for many internal operations while keeping rigidity high. At just 0.281 kg, the bar is light enough to limit centrifugal and inertial effects at speed yet robust in construction for everyday workshop use. These dimensions favour shorter set-ups and make the tool suitable for small-batch work as well as serial production where compact, rigid tooling improves cycle consistency. Applications and handling considerations This SVQC boring bar is geared towards indexable turning tasks where quick insert indexing and dependable clamping are required. The S16Q SVQCR is a pragmatic option for turning and facing within bore diameters compatible with a 20 mm tool body and for operations that benefit from a 107.5° cutting angle. Proper mounting in a compatible toolholder and adherence to recommended insert selection will ensure the expected balance of tool life and machining quality. For reliable supply and personalised advice on the Teknik Makina S16Q SVQCR boring bar, contact Metav Werkzeuge—email info@metav-werkzeuge.com or call +49 2822 7131930 for detailed technical consultation and ordering assistance. Technical Data Article number: K221TM Brand: Teknik Makina Designation: Boring bar – SVQC for VCMT Indexable Inserts ISO designation: S16Q SVQCR Dimensions & core data Shank diameter: 16 mm Cutting height: 30 mm Tool diameter: 20 mm Overall length: 180 mm Weight: 0.281 kg Cutting angle: 107.5° Features & compatibility Compatible with VCMT 1103 indexable inserts Right-hand cutting direction SVQC clamping geometry ISO designation S16Q SVQCR FAQ What inserts fit this boring bar? The bar is compatible with VCMT 1103 indexable inserts; the SVQC clamping format secures the insert for indexable turning tasks. Is the cutting direction fixed or reversible? The tool is specified as right-hand, so it is intended for right-hand cutting operations. What is the shank size and why does it matter? The shank diameter is 16 mm, which determines compatibility with standard toolholders and affects rigidity during internal machining. How long is the bar and what reach does that provide? The overall length is 180 mm, offering medium internal reach while maintaining a balance between accessibility and stiffness. Does the bar have an ISO designation for ordering? Yes, the ISO designation is S16Q SVQCR, which simplifies ordering and ensures correct specification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable T-slot machining with a 20 mm shank and internal coolant ensures precise slot production and improved chip evacuation; order the T-slot cutter directly via Metav Werkzeuge or consult our experts for application-specific advice. T-slot cutter for CCMT 0602 indexable inserts — 20 mm shank, internal coolant (Teknik Makina) The T-slot cutter is a specialised milling tool for producing T-slots using CCMT 0602 indexable inserts, designed for workshop and CNC machining environments. 20 mm shank for stable clamping Internal coolant for improved tool life Compatible with CCMT 0602 indexable inserts Two cutting edges for smooth slotting Precision compatibility for indexable-insert machining The T-slot cutter is engineered for reliable incorporation of CCMT 0602 indexable inserts, enabling rapid insert changes and predictable cutting behaviour. Indexable inserts separate the cutting edge from the tool body: worn inserts are replaced rather than the entire tool, reducing tooling costs and downtime. With a 20 mm shank and a 110 mm overall length, the design balances reach and rigidity to support accurate slot geometry in repeated production runs. The result is consistent slot form and repeatability across batches. Internal coolant and cutting stability that reduce interruptions Equipped with internal coolant, this tool channels coolant directly to the cutting zone, which lowers cutting temperature and improves chip evacuation. Better cooling diminishes thermal deformation at the cutting edge and contributes to longer insert life, while efficient chip removal reduces the risk of re-cutting. The cutter’s two cutting edges provide stable engagement and predictable load distribution during slotting operations, and the Torx fastening system (Torx T7, screw M2.2x5) ensures secure insert clamping for repeatable performance. Workshop handling and maintenance focused on uptime Practical features support fast maintenance and safe handling: the 20 mm shaft diameter offers robust clamping in standard tool holders, the tool’s modest mass (approx. 0.218 kg) makes manual handling straightforward, and the Torx interface simplifies insert changes. For procurement and supply reliability, the tool is manufactured by Teknik Makina and distributed via Metav for central stock availability in Europe. Clear compatibility with CCMT 0602 inserts and a compact footprint help workshops reduce tool inventory while keeping flexibility for various slotting tasks. Order Teknik Makina’s T-slot cutter via Metav Werkzeuge for dependable T-slot production — contact Metav Werkzeuge for application advice or to request additional technical information at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TKC152TM Manufacturer: Teknik Cutting Tools Product type: T-slot cutter Facts Diameter: 20 mm Shank diameter: 20 mm Overall length: 110 mm Cutting length (shaft): 40 mm Cutting edges: 2 Weight: 0.218 kg ECLASS: 21180605 Special features Internal coolant Compatible with CCMT 0602 indexable inserts Torx key: T7 Torx screw: M2.2x5 SKU: TKC152TM Manufacturer label: Teknik Makina FAQ Is this cutter compatible with CCMT 0602 inserts? Yes. The tool is designed specifically for CCMT 0602 indexable inserts and provides the correct seat and clamping interface for these grades. Does the cutter provide internal coolant delivery? Yes. Internal coolant is integrated to supply coolant directly to the cutting zone, improving insert life and chip evacuation. What shank diameter is required for the tool holder? The cutter has a 20 mm shank diameter; a tool holder with a suitable 20 mm bore and secure clamping is required. Which fastening tool is used to change the inserts? A Torx T7 key is used and the retaining screw specification is M2.2x5 for secure insert fastening. What is the SKU and who makes the cutter? The SKU is TKC152TM and the cutter is manufactured by Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise T‑groove machining, the compatibility with SCMT 0602 indexable inserts and a compact 12 mm shank for easy integration into standard toolholders; order the tool directly via Metav Werkzeuge or contact our consultants for application advice. T-slot cutter for SCMT 0602 indexable inserts — 20 mm diameter, 80 mm overall length (Teknik Makina) T-slot cutter for SCMT 0602 indexable inserts, engineered for accurate T‑groove milling in general workshop and production environments. 20 mm diameter for standard T-slots Compatible with SCMT 0602 indexable inserts 80 mm overall length, 32 mm cutting shank Two cutting edges with 55° cutting angle Precise T‑grooves with minimal setup time The 20 mm diameter body combined with a 12 mm shank yields repeatable positioning and consistent groove profiles, reducing setup iterations on the machine. Designed to accept SCMT 0602 indexable inserts, the cutter provides a reliable cutting geometry that keeps tolerances tight across series production. The compact 32 mm cutting shank allows focused material removal while maintaining good access in confined fixtures, translating directly into shorter cycle times and less rework for routine T‑slot operations. Consistent performance through a secure insert system A dual‑edge configuration and a 55° cutting angle ensure stable chip formation and predictable tool behaviour under variable feeds. Insert clamping relies on a Torx T6 screw (specification M1.6x3.4), which gives a secure, repeatable fixation that is straightforward to service during tool changes. The cutter’s geometry and clamping concept provide low vibration and extended insert life in many milling tasks, so machining cycles remain consistent and quality control is simplified during batch production. Designed for workshop efficiency and straightforward maintenance Weighing just 0.062 kg, the cutter is light enough for easy handling yet robust in operation, enabling fast tool exchanges and reduced downtime. The standard 12 mm shank integrates smoothly with common collet and holder systems, avoiding the need for special adaptors. Service routines are simplified by the accessible Torx fastening and standard indexable inserts, allowing maintenance teams to replace cutting edges quickly and resume production with minimal interruption. Contact Metav Werkzeuge for tailored technical guidance on Teknik Makina cutters and to request supply details for the TKC190TM from our Emmerich stock. Technical data Article number: TKC190TM Product type: T-slot cutter Brand: Teknik Makina Compatible inserts: SCMT 0602 Facts Diameter: 20 mm Overall length: 80 mm Shank diameter: 12 mm Cutting shank length: 32 mm Cutting edges: 2 Cutting angle: 55° Weight: 0.062 kg Special features Torx screw: M1.6x3.4 Torx key: T6 Indexable insert compatibility: SCMT 0602 SKU: TKC190TM Product label: 20mm T-Nut Fräser SCMT 0602 L80mm FAQ Which insert type is required for this cutter? The cutter accepts SCMT 0602 indexable inserts; the geometry is matched to the SCMT 0602 form to ensure correct seating and cutting clearance. What are the key dimensions to consider for integration? Critical measures are 20 mm diameter, 80 mm overall length, and a 12 mm shank with a 32 mm cutting shank; these determine holder compatibility and reach. How are the inserts secured in the cutter? Inserts are clamped with a Torx T6 screw specified as M1.6x3.4, providing repeatable and secure fixation for the cutting edges. How many cutting edges are available and what is the cutting angle? The tool features two cutting edges and a 55° cutting angle, designed for stable chip control and consistent groove quality. What is the SKU and manufacturer of the tool? The item is supplied as SKU TKC190TM, manufactured by Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine the tool's internal coolant, a 20 mm shank and compatibility with CCMT 0602 indexable inserts for consistent T‑slot production and improved chip control. Order the T‑nut cutter directly via Metav Werkzeuge or ask our consultants if needed. T‑Nut Cutter TKC154TM — 20 mm shank, internal coolant (Teknik Makina) The T‑Nut Cutter TKC154TM is engineered for producing precise T‑slots using CCMT 0602 indexable inserts, ideal for industrial milling and fixture work. Internal coolant for improved chip evacuation Suits CCMT 0602 indexable inserts 20 mm shank for rigid clamping Two cutting edges for efficient material removal Enhanced rigidity for accurate T‑slot machining The tool’s 20 mm shank and balanced geometry provide noticeably improved rigidity, reducing vibration during plunge and peripheral milling of T‑slots. Greater stability directly benefits surface finish and repeatability, which in turn reduces rework and downtime in production. For operators working with fixture plates and machine tables, the result is consistent slot geometry and longer insert life through stable cutting conditions. Optimised cooling and controlled chip flow Built with internal coolant, the cutter routes cutting fluid directly to the cutting zone for better chip evacuation and thermal control. The TKC154TM’s internal coolant channel helps flush chips away from the insert pockets, lowering the risk of built‑up edge and improving insert wear behaviour. For machining cycles where heat and chip packing can compromise tolerances, this targeted cooling supports sustained performance and predictable tool life. Compatibility with CCMT 0602 inserts lowers tooling cost By taking CCMT 0602 indexable inserts, the cutter allows rapid insert changes rather than full‑tool replacement, which cuts tooling expenditure and shortens maintenance intervals. The configuration with two cutting edges balances material removal and chip size control for many common steels and non‑ferrous materials. Using standard insert types also simplifies logistics and keeps spare‑part inventories compact for efficient workshop management. Practical design for production workflows With a 150 mm overall length and a 38 mm cutting length, the tool suits standard toolholders while keeping reach and rigidity in balance. The compact mass (approx. 0.312 kg) and the use of a Torx T7 key with M2.2x5 fixing screws make routine insert changes straightforward and reliable. Designed for repeatable setups, the cutter integrates into automated tool racks and manual tool change processes alike, helping operations maintain throughput without sacrificing precision. For tailored setup advice, Metav’s technical advisers provide practical support from the Emmerich facility. Contact Metav Werkzeuge for a technical consultation or to secure the Teknik Makina TKC154TM T‑nut cutter with internal coolant from our Emmerich warehouse. Technical data SKU: TKC154TM Product: T‑nut cutter for CCMT 0602 indexable inserts ECLASS: 21180605 Manufacturer: Teknik Makina Core technical data Diameter: 20 mm Shank diameter: 20 mm Overall length: 150 mm Cutting length (shank): 38 mm Cutting edges: 2 Weight: 0.312 kg Internal coolant: yes Special features Internal coolant Suits CCMT 0602 indexable inserts Torx key: T7 Torx screw: M2.2x5 SKU: TKC154TM Manufacturer brand: Teknik Makina FAQ Which insert type fits this cutter? The T‑nut cutter TKC154TM is designed for CCMT 0602 indexable inserts, allowing straightforward insert replacement and broad material adaptability. Is the tool suitable for serial production? Yes — the combination of a 20 mm shank and internal coolant makes the cutter suitable for continuous production, improving insert life and process stability. What are the mounting and clamping requirements? A rigid clamping system matching a 20 mm shank is recommended; the TKC154TM’s shank size supports secure fixation and minimal run‑out under load. How does the coolant supply work with this tool? Coolant is delivered through the tool body to the cutting zone; the internal coolant on the TKC154TM improves chip evacuation and reduces local temperature spikes. Which screw and key are required for insert fastening? Insert fastening uses a Torx T7 driver with an M2.2x5 screw for reliable clamping and quick serviceability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com