Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a rigid 30 mm milling body with internal coolant and compatibility with APKT 1003 indexable inserts to reduce setup time and improve process stability; order directly via Metav Werkzeuge or consult our specialists for application support. Shank milling cutter S150-1TM — 30 mm diameter with internal coolant for APKT 1003 indexable inserts Shank milling cutter S150-1TM is a compact milling body designed for insert-based machining of short to medium axial engagements in industrial production. 30 mm diameter for compact milling bodies Internal coolant for improved chip evacuation Compatible with APKT 1003 indexable inserts 25 mm shank for secure clamping Increased rigidity and consistent cutting performance The combination of a 30 mm diameter cutter head and a 25 mm shank delivers a stiffer tool assembly that minimises vibration and runout during interrupted cuts. With 4 cutting edges and a 40 mm cutting length, the design supports balanced radial engagement while maintaining surface quality and dimensional accuracy. For process planners, the compact overall length of 100 mm reduces overhang and contributes to repeatable results in batch production. Faster tool changes and effective cooling for longer cycles This milling body accepts APKT 1003 indexable inserts (compatible with Korloy grades), enabling rapid insert replacement rather than full-tool regrinds. The integrated internal coolant channel directs lubricant to the cutting zone, enhancing chip flushing and heat control at the insert edge. The clamping system uses a Torx T8 key and M2.5x5.5 screws, simplifying insert retention and ensuring secure fastening under heavy cuts. These features lower machine downtime and streamline shop-floor changeover procedures. Workshop integration and practical handling benefits Weighing 0.411 kg and identified as SKU S150-1TM, the tool is compact to handle and straightforward to store in modular tool cabinets. The moderate overall length and standard 25 mm shank diameter make the cutter compatible with common toolholders, reducing the need for special adapters. Supplied by Teknik Makina, the milling body is suited for production environments seeking cost-effective indexable tooling solutions that combine rigidity, coolant capability and straightforward maintenance. Discuss machining requirements with Metav Werkzeuge in Emmerich — specialists can advise on Teknik Makina’s coolant-through shank milling cutter S150-1TM and recommend the right APKT 1003 insert grade for the application Technical data SKU: S150-1TM Label: 30mm Schaftfräser APKT 1003 L100mm mit Innenkühlung Manufacturer: Teknik Makina Product type: Shank milling cutter Facts Diameter: 30 mm Overall length: 100 mm Shank diameter: 25 mm Cutting length: 40 mm Number of cutting edges: 4 Weight: 0.411 kg Special features Internal coolant: yes Compatible inserts: APKT 1003 Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M2.5x5.5 ECLASS: 21180806 FAQ Which inserts fit this milling body? The Teknik Makina shank milling cutter S150-1TM is designed for APKT 1003 indexable inserts; select the appropriate Korloy grade to match the material and cutting parameters. Does the tool supply coolant through the body? Yes, the S150-1TM features internal coolant, which delivers lubricant to the cutting edge for improved chip control and thermal stability. What fastening hardware is required for insert clamping? Insert clamping uses a Torx T8 key and M2.5x5.5 screws as specified for the S150-1TM, ensuring secure retention of APKT 1003 inserts. Is the shank size compatible with standard toolholders? The cutter has a 25 mm shank, which is compatible with common 25 mm collet and clamping systems used in many milling setups. How compact is the tool for use in limited overhang situations? With an overall length of 100 mm and a cutting length of 40 mm, the S150-1TM is engineered for situations where reduced overhang improves stability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust 30 mm cutting diameter combined with internal coolant and secure 25 mm shank clamping for consistent material removal in CNC milling. Order the shank milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shank milling cutter for R390 17 indexable inserts — 30 mm, internal coolant (Teknik Makina) Shank milling cutter for R390 17 indexable inserts designed for efficient face and peripheral milling in CNC machining centres, compatible with Sandvik R390 17 indexable inserts and engineered for stable, repeatable performance. Internal coolant channel for improved chip evacuation 30 mm cutting diameter for robust material removal Compatible with Sandvik R390 17 indexable inserts 25 mm shank for secure clamping Increase throughput with controlled coolant and chip flow The combination of an integrated internal coolant channel and a Ø 30 mm cutting diameter reduces heat at the cutting zone and promotes reliable chip evacuation, which directly improves tool life and surface finish quality. The internal coolant delivers coolant close to the cutting edges, minimising thermal loads and helping to avoid built-up edge on indexable inserts. For production environments this translates into fewer tool changes and less unplanned downtime, supporting a steady and efficient machining cycle. Secure clamping and consistent cutting performance With a 25 mm shank and a 45 mm cutting length mounted on a 120 mm overall body, the cutter provides the rigidity required for stable milling operations. The three cutting edges are designed to distribute cutting forces evenly, reducing vibrations and improving dimensional accuracy on workpieces. The torque-fixing system uses a T15 Torx key and M3.5x8.5 Torx screws for repeatable insert retention, ensuring each indexable insert seats exactly as intended and maintains concentricity during high-speed or interrupted cuts. Compatibility and workshop integration for versatile use This tool accepts R390 17 indexable inserts from Sandvik, allowing straightforward integration into existing tooling stocks and reducing the need for bespoke inserts. The cutter's dimensions and standardised fixing mean it is readily interchangeable with common holder systems, simplifying tool management on the shop floor. Documentation and labelling—including the SKU S512-1TM—help to keep inventory and set-up clear, while the modest weight supports safe handling and fast tool changes during shift operations. Practical benefits for production planning and procurement Selecting a cutter with built-in coolant and standard insert compatibility reduces logistical complexity and supports cost-effective maintenance cycles. The design allows predictable machining parameters to be established quickly, accelerating process qualification and reducing scrap. For procurement teams, the compatibility with widespread Sandvik inserts and the standardised shank diameter make this cutter a practical choice for mixed-production environments where flexibility and reliability are priorities. For technical advice or to arrange fast supply of Teknik Makina tooling, contact Metav Werkzeuge for tailored guidance and reliable delivery from Emmerich. Technical data Article number: S512-1TM Manufacturer: Teknik Makina Product type: Shank milling cutter Label: 30mm Schaftfräser R390 17 L120mm mit Innenkühlung Facts Cutting diameter: 30 mm Overall length: 120 mm Shank diameter: 25 mm Cutting length: 45 mm Number of cutting edges: 3 Weight: 0.461 kg Design & features Internal coolant: Yes Compatible inserts: R390 17 Compatible insert manufacturer: Sandvik Torx key: T15 Torx screw: M3.5x8.5 FAQ What insert type does this cutter accept? The shank milling cutter accepts R390 17 indexable inserts and is specified for inserts from Sandvik, enabling use of common carbide grades and chipbreakers. Can the cutter be used for both face and peripheral milling? Yes, the tool geometry and 30 mm diameter make the cutter suitable for both face and peripheral milling tasks where the insert style and machining parameters match the application. How is coolant supplied to the cutting zone? Coolant is delivered via an internal coolant channel, feeding the cutting edges directly to support cooling and chip evacuation during machining. Which SKU should be ordered for this tool? Order using SKU S512-1TM to ensure the correct model with internal coolant and Sandvik R390 17 compatibility is supplied. What fastening hardware is required for insert assembly? Insert retention uses a T15 Torx key and M3.5x8.5 Torx screws for repeatable and secure fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of compatibility, secure clamping and efficient cutting: the tool accepts RDMT 1003 indexable inserts, offers a 30 mm cutting diameter with three cutting edges and a rigid 25 mm shank for reduced vibration. Order the shank milling cutter directly via Metav Werkzeuge or ask the consultants for tailored application advice. Shank milling cutter R213TM – 30 mm Ø, three cutting edges (Teknik Makina) The Shank milling cutter R213TM is a purpose-built tool for indexable-insert milling with RDMT 1003 inserts, designed to deliver steady material removal in general workshop and light industrial applications. 30 mm cutting diameter Three cutting edges for smooth milling 25 mm shank for secure clamping Compatible with RDMT 1003 inserts Faster, more consistent material removal for routine milling The combination of a 30 mm diameter and three cutting edges is focused on delivering a reliable metal-removal rate while maintaining a consistent surface finish. The cutter’s 40 mm cutting length provides adequate engagement for many slotting and face-milling tasks without excessive overhang, which helps to keep vibration and runout low. For practical selection, the tool accepts standard RDMT 1003 indexable inserts, enabling predictable tool-life planning and straightforward insert changes. This configuration is intended to reduce cycle times and improve process stability in repetitive production runs. Rigid design that maintains precision under load A 25 mm shank and a 200 mm overall length give the assembly a balance between reach and rigidity, which matters when repeatability and dimensional accuracy are required. The clamping system uses an M3.5 locking screw and a M3.5×8.5 Torx screw, tightened with a T15 key, ensuring secure insert retention and minimised micro-movement at the cutting edge. Reduced tool chatter translates into better surface quality and less wear on inserts, so downtimes for regrinding or replacement are less frequent. The tool’s mass (approx. 0.789 kg) contributes to stable cutting dynamics in many bench and shop-floor setups. Practical compatibility and workshop suitability Engineered for indexable-insert operations, the cutter is particularly suited to workshops that favour interchangeable inserts for quick servicing and cost-effective consumable management. Its acceptance of RDMT 1003 inserts aligns the tool with a wide range of insert geometries and grades, allowing selection according to workpiece material and machining strategy. The robust shank and standard fastening hardware make the cutter a sensible choice for production environments and maintenance shops that require a dependable, easy-to-service milling solution. For procurement and specification checks, Metav’s product information acts as a reliable quality filter for European workshops. Contact Metav Werkzeuge for an application review and secure the Teknik Makina R213TM shank milling cutter for reliable RDMT 1003 insert machining — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: R213TM Manufacturer: Teknik Makina Facts Cutting diameter: 30 mm Shank diameter: 25 mm Cutting length: 40 mm Overall length: 200 mm Number of cutting edges: 3 Weight: 0.789 kg Special features Compatible with RDMT 1003 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 FAQ What insert type does the cutter use? The cutter is designed for RDMT 1003 indexable inserts, enabling straightforward insert replacement and flexible grade selection. Is the tool suitable for general-purpose milling? Yes, the R213TM shank milling cutter is intended for general workshop milling tasks where a 30 mm diameter and three-flute geometry provide efficient material removal. How is the insert secured in the cutter? Insert retention is achieved with an M3.5 locking screw and an M3.5×8.5 Torx screw; the Torx head is tightened using a T15 key for secure clamping of the insert. Can the cutter achieve low-vibration cutting in production use? With its 25 mm shank and balanced overall length, the R213TM is engineered to reduce vibration and support consistent cutting performance in repetitive production settings. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a 30 mm diameter and a 3‑cut geometry for reliable material removal and consistent cycle times; built for indexable insert systems and supplied with a secure Torx fastening, this shank milling cutter streamlines tool changeovers—order via Metav Werkzeuge or consult the technical team for application advice. Shank milling cutter S444TM — indexable cutter, 30 mm diameter, for APKT 1604 inserts (Teknik Makina) Shank milling cutter S444TM designed for medium‑duty milling applications where fast insert changes and robust clamping are required 30 mm cutting diameter for versatile use 3‑cut geometry for balanced cutting performance Compatible with APKT 1604 indexable inserts Secure Torx clamping M4x10, T15 key Improved productivity through engineered cutter geometry The 3‑cut design of this indexable milling cutter favours steady chip formation and reduced cutting forces, which leads to more predictable tool life and shorter cycle times. Because inserts are used instead of solid teeth, reconditioning is simple: worn cutting edges are replaced in seconds, keeping spindle downtime to a minimum. The combination of a 30 mm diameter with a 60 mm cutting length provides a practical reach for pocketing and face milling tasks while maintaining rigidity for consistent surface finish quality. Built for reliable clamping and fast maintenance A Torx clamping screw (M4x10) together with the supplied T15 key ensures a firm insert seat and repeatable torque when inserting APKT 1604 indexable inserts. This fastening arrangement, which is widely adopted in the industry, reduces the risk of insert movement under load and simplifies workshop procedures. The tool’s 25 mm shank is engineered for secure chucking or collet mounting, so spindle concentricity is maintained and vibration is minimised during operation. Material compatibility and application scope Configured for APKT 1604 insert geometry and compatible with Korloy insert types, the cutter is intended for general metalworking tasks where moderate depths of cut and stable feed rates are required. Its 90° cutting angle supports square shoulder milling and effective slotting routines. While designed primarily as an insert cutter for ferrous and non‑ferrous components, final process parameters should be matched to the insert grade and machine capabilities to achieve optimum results. Practical handling and workshop benefits With an overall length of 300 mm and a balanced mass of approximately 1.168 kg, the tool is easy to handle and aligns with common tool‑management workflows. The modular nature of indexable systems means inventory is reduced: fewer complete tools are needed when multiple insert grades and geometries are stocked. Additionally, the standardised Torx fixing and common insert format simplify training and spare‑part logistics across production teams. For procurement, availability checks or application guidance on the Teknik Makina S444TM shank milling cutter—compatible with APKT 1604 indexable inserts—please contact Metav Werkzeuge in Emmerich by e‑mail or phone for fast technical advice and local supply options Technical Data Article number: S444TM Manufacturer: Teknik Makina Product: Shank milling cutter for APKT 1604 indexable inserts Brand SKU: S444TM Diameter: 30 mm Shank diameter: 25 mm Cutting length: 60 mm Overall length: 300 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 1.168 kg Compatible inserts: APKT 1604 Suitable for inserts by: Korloy Torx screw: M4x10 Torx key size: T15 Tool type: Indexable insert milling cutter FAQ What insert format does the cutter accept? The cutter accepts APKT 1604 indexable inserts; compatible Korloy inserts are listed among recommended options for this tool. Which shank diameter is provided for mounting? A 25 mm shank is specified for stable clamping in collets or chucks. Is the Torx fastening included for insert mounting? The tool uses an M4x10 Torx screw and requires a T15 key for secure insert fastening. What cutting operations is the tool suited to? The S444TM is intended for face milling, shoulder milling and light slotting where a 30 mm diameter and 3‑cut geometry deliver reliable material removal. How long is the tool and what is its cutting reach? Overall length is 300 mm, with a cutting length (effective) of 60 mm, offering a practical balance between reach and stiffness. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a rigid 32 mm shank and a long 120 mm cutting length for stable, deep-hole machining; compatibility with Korloy WCM-06T3 inserts keeps tooling costs low and downtime short. Order the drill body directly via Metav Werkzeuge or ask our consultants for application advice. Indexable-insert drill body U628TM — 30 mm diameter, 120 mm cutting length (Teknik Cutting Tools) An indexable-insert drill body designed for medium-deep drilling tasks, compatible with Korloy WCM-06T3 replaceable inserts and engineered for secure clamping in 32 mm toolholders 30 mm cutting diameter 120 mm cutting length 32 mm shank for high rigidity Compatible with Korloy inserts Consistent hole quality through improved rigidity The drill body delivers a stable machining platform thanks to its 32 mm shank, which reduces vibration and runout during drilling. The combination of a wide shank and a 30 mm diameter supports reproducible hole geometry and helps maintain tight positional and size tolerances. For production environments aiming to decrease scrap rates, this stability translates into fewer reworks and consistent cycle times. Economical machining with replaceable inserts Equipped to accept WCM-06T3 indexable inserts from Korloy, the tool reduces running costs compared with solid carbide alternatives. Replaceable cutting tips mean that only the insert needs swapping when worn, not the entire tool body. The 120 mm cutting length enables deeper operations without changing tools, so setups are simplified and tooling inventory can be optimised for lower total cost of ownership. Practical integration into existing tool systems With an overall length of 211 mm and a shank mounting length of 58 mm, the tool fits standard 32 mm holders used across many machining centres. The body’s mass of 0.912 kg balances stiffness with manageable handling during tool changes. The U628TM is supplied as a drill body suited for indexable-insert workflows and is especially useful where fast tip changes and predictable tool life are priorities. For reliable supply and technical guidance on the Teknik Cutting Tools U628TM drill body, contact Metav Werkzeuge in Emmerich — expert advice and fast shipping from the European quality filter: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: U628TM Manufacturer: Teknik Makina Designation: Indexable-insert drill body (Vollbohrer) Facts Diameter: 30 mm Cutting length: 120 mm Overall length: 211 mm Shank diameter: 32 mm Shank mounting length: 58 mm Weight: 0.912 kg Special features Compatible inserts: WCM-06T3 Compatible insert manufacturer: Korloy Files available: 2 FAQ What insert type does this drill body accept? The drill body accepts WCM-06T3 indexable inserts; Korloy is listed as the compatible insert manufacturer for the U628TM. Is the shank size suitable for standard toolholders? Yes, the 32 mm shank is compatible with common 32 mm mounting systems, providing rigidity for stable drilling. How deep can this tool drill effectively? The tool provides a 120 mm cutting length, allowing medium-deep holemaking without additional extensions. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of reliable drilling performance and straightforward maintenance: the tool’s 30 mm diameter and 90 mm cutting length deliver consistent deep-hole results while the 32 mm shank ensures secure clamping in standard toolholders — order the tool directly via Metav Werkzeuge or consult Metav’s specialists for application advice. Solid drill U170TM by Teknik Makina — 30 mm diameter, 90 mm cutting length The Solid drill U170TM is a heavy-duty industrial drilling solution designed for metalworking centres and drilling operations where extended reach and stable clamping are required, compatible with Korloy indexable inserts for efficient reconditioning. 30 mm diameter for consistent hole size 90 mm cutting length for extended reach 32 mm shank for secure clamping Compatible with Korloy WCM-06T3 inserts Consistent hole quality for production runs The design provides predictable results in serial drilling: the 30 mm nominal diameter combined with a 90 mm cutting length keeps the cutting zone stable over long cycles, which reduces dimensional scatter. The tool body and geometry are optimised to ensure repeatable centring and chip evacuation, so the drilling process is maintained under controlled conditions. This stability supports higher first-pass yields and reduced rework in batch production. Quick retrofit and economical reconditioning A main economic advantage is the use of replaceable cutting elements: the tool is specified for Korloy WCM-06T3 inserts, which enables rapid onsite replacement of worn edges without full tool changeover. Insert-based servicing shortens downtime and lowers consumable cost compared with disposable solutions. The 32 mm shank and standard interface make integration into existing tooling systems straightforward, enabling fast retrofitting across compatible toolholders. Built for demanding machining centres and secure clamping With an overall length of 181 mm and a shank length of 58 mm, the assembly balances reach and rigidity for machining centres and heavy-duty drilling machines. The relatively low mass of 0.847 kg helps maintain dynamic balance at typical spindle speeds while the robust shank diameter ensures torque transmission and secure clamping. The specification supports stable machining under higher feed and depth conditions when paired with suitable insert grades and cutting parameters. For supply, dimension checks or technical consultation on the Teknik Makina U170TM solid drill, contact Metav Werkzeuge for precise compatibility guidance and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: U170TM Manufacturer: Teknik Makina Product name: Solid drill (Vollbohrer) Facts Diameter: 30 mm Total length: 181 mm Cutting length: 90 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 0.847 kg Special features Compatible with Korloy WCM-06T3 inserts Designed for indexable insert replacement Suitable for industrial metalworking and drilling centres FAQ What insert type is specified for this drill? The drill is specified for Korloy WCM-06T3 inserts; the insert choice determines material suitability and cutting data for the U170TM. Can the tool be clamped in standard toolholders? Yes, the 32 mm shank and 58 mm shank length are compatible with common clamping systems used in machining centres. What is the maximum drilling reach provided? The effective drilling reach is supported by a 90 mm cutting length within a total tool length of 181 mm. Is the tool suitable for serial production? The geometry and insert-based design make the tool well suited to serial drilling where repeatability and quick edge replacement are required. How does the insert system affect running costs? Using replaceable Korloy inserts reduces downtime and lowers consumable expense by allowing edge changes instead of full-tool replacement, improving cost-efficiency over long production runs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a 30 mm cutting diameter, 120 mm effective cutting length and a 32 mm shank for stable, repeatable holemaking; order directly via Metav Werkzeuge or request consultancy from the Metav team for technical guidance. Indexable drill U730TM – Indexable drill body, Ø 30 mm, 120 mm cutting length (Teknik Makina) A robust Indexable drill U730TM designed for deep-hole machining and flexible insert use in CNC and machining centres Ø 30 mm cutting diameter for robust holemaking 120 mm effective cutting length for deep drilling 32 mm shank diameter for secure toolholding Compatible with SPMG 0904 inserts (Taegutec, YG-1) Precision and stability for demanding drilling The U730TM is engineered to deliver consistent results through a combination of a 30 mm nominal diameter and a reinforced 32 mm shank, which together improve concentricity and minimise tool deflection under load. The solid construction and balanced geometry support stable cutting conditions on machining centres, so that tool life is preserved and bore quality is repeatable. This stability translates directly into fewer rejected parts and more predictable cycle times for production runs. Flexible insert system that lowers operating costs Accepting SPMG 0904 indexable inserts from established suppliers such as Taegutec and YG-1, the tool body enables rapid insert changes and consistent edge geometry without the need to replace the complete tool. The use of standardised inserts reduces inventory complexity and allows shops to select grade and coating combinations that suit specific workpiece materials. The modular approach supports economic tooling strategies and simplifies maintenance planning in busy workshops. Deep-hole capability and efficient setup With an effective cutting length of 120 mm and an overall length of 211 mm, the design is tailored for deeper holemaking where a longer reach is required while keeping rigidity acceptable. The 58 mm shank engagement length provides defined clamping depth for many toolholders, enabling secure retention and straightforward setup. These dimensional characteristics reduce the number of tool exchanges for multi-stage operations, supporting continuous machining and improved throughput. Integration into the workshop and typical applications Built for production environments and jobbing shops, this indexable drill body suits tasks where repeatable hole quality and fast servicing matter. The U730TM works well in component production, fixture manufacturing and series machining where insert-change speed and predictable performance are priorities. Specification-driven procurement benefits from the clear technical parameters, making the tool a reliable choice for planners seeking reduced downtime and simpler tool management. For technical clarification, compatibility checks or to procure the U730TM via Metav Werkzeuge, contact Metav Werkzeuge for a concise product consultation and supply arrangement – info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: U730TM Manufacturer: Teknik Makina Product type: Indexable drill body Core specifications Diameter: 30 mm Cutting length: 120 mm Overall length: 211 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 0.93 kg Compatibility & special features Insert type: SPMG 0904 Compatible with inserts by Taegutec, YG-1 Shank engagement length: 58 mm Designed for CNC and machining centre use FAQ What insert type does this drill use? The U730TM indexable drill body uses SPMG 0904 inserts and is compatible with insert grades from Taegutec and YG-1. Can the tool be used for deep-hole machining? Yes, the U730TM features a 120 mm cutting length and an overall length of 211 mm, making it suitable for deeper holemaking tasks in series production. What are the shank dimensions and why do they matter? Shank diameter is 32 mm with an engagement length of 58 mm; these dimensions ensure secure clamping and reduced runout for consistent bore quality when used with appropriate holders. Which workshops will benefit most from this drill body? CNC production shops and toolrooms that prioritise rapid insert changes, repeatable bore geometry and reduced tooling inventory will find the U730TM particularly advantageous. Is the U730TM supplied with inserts? The U730TM is an indexable drill body; insert supply depends on the chosen configuration—SPMG 0904 inserts from the preferred manufacturers can be sourced separately to match the machining task. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable insert drilling system that combines a stable 30 mm cutting diameter with a 60 mm effective cutting length for consistent hole quality and reduced tool change frequency. Order the tool directly via Metav Werkzeuge or consult the technical team for application-specific advice. Teknik Makina U128TM indexable insert drill — 30 mm, 32 mm shank The U128TM indexable insert drill is a precision drilling solution designed for medium‑depth holemaking in workshop and production environments, offering repeatable results with replaceable inserts. 30 mm nominal diameter for stable holemaking 60 mm cutting length for medium‑deep drilling Compatible with Korloy WCM‑06T3 indexable inserts 32 mm robust shank, 151 mm overall length Reliable hole quality and reduced cycle variation The tool body is engineered to deliver consistently concentric holes, making it suitable where repeatability matters. With a 30 mm diameter and 60 mm cutting length, the geometry maintains rigidity through the cut, which reduces deflection and improves surface finish on successive holes. The design reduces the need for rework and supports higher first‑pass yield rates, translating into measurable process stability on typical machining centres. Fast reconditioning through an indexable insert system Equipped to accept indexable inserts, the drill eliminates lengthy regrinding cycles: worn cutting edges are restored immediately by replacing or indexing inserts. The compatibility with Korloy WCM‑06T3 inserts means cutting edge changes are straightforward and predictable. For production shops this reduces machine downtime and toolroom workload, while preserving consistent cutting performance without complex re‑setting procedures. Secure clamping and machine compatibility for reliable runs A 32 mm shank and a 58 mm shank length provide a secure clamping interface that is suited to common toolholders and adaptors, while the 151 mm overall length balances reach with stiffness. The compact mass of 0.755 kg contributes to stable spindle dynamics and lower vibration during drilling. This combination supports stable chip evacuation and extended insert life when used within recommended spindle speeds and feeds. Practical workshop advantages and supply reassurance The modular nature of the drill makes stocking economical: fewer complete bodies are needed when inserts are used, simplifying logistics and lowering inventory carrying costs. The tool’s robust construction and clear interface for Korloy inserts make it a pragmatic choice for production environments seeking dependable performance and straightforward maintenance routines. Metav Werkzeuge’s European distribution ensures transparent delivery and a consistent quality filter for purchasers. Contact Metav Werkzeuge today for specific application guidance on the U128TM indexable insert drill and to confirm availability from Emmerich for your next production run Technical data Article number: U128TM Manufacturer: Teknik Makina Type: Indexable insert drill (translated from "Vollbohrer") Diameter: 30 mm Cutting length: 60 mm Shank diameter: 32 mm Shank length: 58 mm Overall length: 151 mm Weight: 0.755 kg Core data Nominal diameter: 30 mm Effective cutting length: 60 mm Shank diameter: 32 mm Shank length: 58 mm Overall length: 151 mm Weight: 0.755 kg Special features Compatible insert type: WCM‑06T3 Compatible insert manufacturer: Korloy Indexable insert system for quick edge changes FAQ Which inserts fit the drill? The drill accepts WCM‑06T3 indexable inserts; Korloy is listed as the compatible insert manufacturer for reliable fit and predictable cutting geometry. What are the key dimensions to check for machine compatibility? Check the 32 mm shank and the 58 mm shank length against the toolholder; the 151 mm overall length also determines reach and clearance in the machine setup. Is the tool suitable for deep hole drilling? The tool is optimised for medium‑depth applications with a 60 mm cutting length; for deeper holes, tool extension and rigidity should be evaluated alongside cutting data. How does the indexable design affect workshop logistics? Using indexable inserts reduces the need to replace entire tools; worn edges are replaced quickly, lowering inventory of complete bodies and minimising machine downtime. What is the article number or SKU for ordering? The article number / SKU for ordering is U128TM; reference this when requesting the tool or compatible inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a dependable drilling solution that combines robust shank stability and extended cutting reach: 30 mm cutting diameter with a 90 mm cutting length and a 32 mm shank deliver repeatable hole quality and reduced setup time. Order the solid drill directly via Metav Werkzeuge or ask our consultants if needed Teknik Makina solid drill – 30 mm Ø, 90 mm cutting length The Teknik Makina solid drill is a heavy-duty, indexable-insert drill designed for precise production drilling where tool change speed and repeatability matter 30 mm cutting diameter 90 mm cutting length 32 mm shank diameter Compatible with SPMG 0904 inserts Engineered for precise, repeatable holes and robust clamping This solid drill is built around a stout 32 mm shank and a substantial overall length of 181 mm, providing the stability needed in serial production and machining centres. The 90 mm cutting length allows deeper hole-making without resorting to stepped operations, which reduces handling time and potential alignment errors. Using an indexable insert concept with SPMG 0904 inserts keeps maintenance straightforward: worn inserts are replaced rather than the whole tool, cutting downtime and tool inventory costs. The tool’s mass (approx. 0.823 kg) contributes to vibration damping, which supports consistent hole geometry and prolongs insert life. Designed for efficient workshop and CNC workflows Manufactured for compatibility with mainstream insert suppliers such as Taegutec and YG-1, the drill integrates into common production toolsets with minimal adaptation. The insert-type system ensures rapid cutting-edge renewal and consistent cutting parameters across shifts, improving throughput and reducing scrap rates. The combination of a standard 32 mm holder and the common SPMG 0904 insert form factor simplifies procurement and ensures access to replacement parts. For operations requiring predictable cycle times and low tool-change overhead, this design provides a measurable contribution to process efficiency. Reliability, supply and the Metav promise for practical precision Sourcing through Metav brings the practical advantage of a European distribution node that acts as a quality filter for workshop products. The supply chain reliability and technical consultancy available from Metav support seamless integration of the drill into production processes. By choosing tools that match common insert standards and robust shank geometry, teams gain a pragmatic balance between performance and cost control, backed by proven availability and straightforward logistics from an experienced precision partner Secure production-ready drilling performance with the Teknik Makina solid drill — contact Metav Werkzeuge in Emmerich for personalised technical advice and prompt dispatch at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: U830TM Manufacturer: Teknik Makina Product name: solid drill / Vollbohrer Numbers / Core technical data Diameter: 30 mm Overall length: 181 mm Cutting length: 90 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 0.823 kg Designs / Special features Compatible inserts: SPMG 0904 Compatible with Taegutec, YG-1 inserts Indexable-insert drilling system Solid drill suitable for production environments FAQ Which inserts fit this drill? The solid drill accepts SPMG 0904 indexable inserts; compatible suppliers include Taegutec and YG-1 for a wide range of grades. What are the main dimensions and drilling reach? The tool offers a 30 mm cutting diameter, 90 mm cutting length and an overall length of 181 mm for extended drilling reach. What is the shank size and how is it clamped? Shank diameter is 32 mm with a shank length of 58 mm, providing stable clamping in standard toolholders. Is this drill suitable for CNC serial production? Yes, the indexable-insert concept and robust shank geometry make the tool well suited to CNC production for repeatable, high-throughput operations. How do insert changes affect uptime? Using replaceable SPMG 0904 inserts allows fast edge renewal, which reduces machine downtime compared with regrinding or replacing solid-tip tools. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of reliable internal coolant, a 30 mm cutting diameter and a rigid 25 mm shank for a stable, productive milling process; order the shaft cutter directly via Metav Werkzeuge or consult our specialists for application advice. Indexable Insert End Mill for APKT 1003 (30 mm, internal coolant) – Teknik Makina The Indexable Insert End Mill for APKT 1003 is a 30 mm milling cutter designed for indexable-insert machining, offering internal coolant delivery for improved tool life and use with Korloy APKT 1003 inserts. 30 mm diameter with internal coolant Compatible with APKT 1003 Korloy inserts 25 mm shank for rigid tool holding 40 mm cutting length for deeper passes Greater productivity through coolant-fed cutting The internal coolant channel delivers coolant directly to the cutting zone, reducing heat generation and improving chip evacuation. This results in longer insert life and more consistent cutting performance across batch runs. Combined with the 30 mm cutting diameter and stable geometry, the tool supports higher metal removal rates while maintaining surface quality. The coolant-fed design is particularly beneficial in interrupted cuts and semi-finishing operations where reliable cooling and chip flow matter. Practical savings with indexable inserts and easy servicing Using APKT 1003 indexable inserts allows rapid replacement of worn cutting edges without regrinding the body, reducing downtime and tooling cost. Replacement is straightforward thanks to the accessible fixing hardware (Torx T8 and screw M2,5x5,5), enabling maintenance by trained workshop staff with common tools. The insert system provides the economic advantage of renewing only the cutting edge while keeping clamping accuracy and repeatability at a professional level. Rigid clamping and stable process behaviour The 25 mm shank ensures compatibility with standard holders and collets, delivering the rigidity required for stable milling conditions. With four cutting edges and a 40 mm cutting length, the geometry balances material engagement and torque demand to minimise vibration and tool deflection. This contributes to repeatable tolerances and surface finishes, making the cutter suitable for production environments where consistency between parts is essential. Application guidance and handling recommendations The tool body, identified by SKU S170-1TM, benefits from straightforward handling and secure fastening of inserts; the combination of indexable design and internal coolant reduces thermal distortion during extended cycles. For optimal results, match the shank clamping diameter to the machine tool holder, check insert seating torque, and confirm coolant pressure and flow to exploit the full advantages of the coolant-fed system. Regular inspection of clamping screws and insert seats preserves accuracy and extends service intervals. Contact Metav Werkzeuge to discuss the Teknik Makina indexable insert end mill, confirm the best insert grade for the application, or request a tailored quote for your production needs Technical data SKU: S170-1TM Label: 30mm Schaftfräser APKT 1003 L120mm mit Innenkühlung Manufacturer: Teknik Makina Facts Diameter: 30 mm Total length: 120 mm Shank diameter: 25 mm Cutting length (shank): 40 mm Number of cutting edges: 4 Weight: 0.487 kg Torx key: T8 Torx screw: M2,5x5,5 Internal coolant: yes Special features Compatible with APKT 1003 indexable inserts Suitable for Korloy APKT 1003 insert grades Indexable insert system for quick edge changes Rigid shank for stable toolholding Accessible fastening hardware for maintenance FAQ What inserts are compatible with this end mill? The end mill accepts APKT 1003 indexable inserts and is specified for Korloy APKT 1003 grades; matching the insert grade to the workpiece material ensures optimal performance. How is coolant supplied to the cutting edge? Coolant is delivered through the tool body via the integrated internal channel, enabling direct cooling at the cutting zone and improving insert life and chip evacuation. Which shank holders are required for stable clamping? A holder or collet that accepts a 25 mm shank and provides accurate concentric clamping is recommended to exploit the cutter’s rigidity and maintain repeatable results. How are inserts secured and replaced? Inserts are secured with a Torx T8 screw (M2,5x5,5). Replacement requires the specified Torx key and adherence to the manufacturer’s torque recommendations for consistent seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine high rigidity with coolant-assisted chip control for consistent surface quality and longer insert life; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Milling Cutter S804-1TM for WNMX 09T3 Indexable Inserts — 30 mm, Internal Coolant (Teknik Makina) The Milling Cutter S804-1TM is a precision cutter body designed for indexable milling with WNMX 09T3 inserts, suited to general and finishing machining where controlled coolant delivery and stable clamping are required. 30 mm diameter body for stable cutting Internal coolant for improved chip evacuation Compatible with Korloy WNMX 09T3 inserts 25 mm shank for rigid clamping Three cutting edges for balanced cutting Optimised cutting performance through internal coolant and geometry The cutter body delivers measurable improvements in tool life and process stability by combining an internal coolant channel with a compact cutting geometry. The integrated internal coolant directs lubricant and coolant straight to the cutting zone, reducing temperatures and improving chip evacuation, which in turn extends insert life and lowers the frequency of tool changes. With a 30 mm diameter and an insert system based on WNMX 09T3, the assembly supports repeatable machining results and consistent surface finish, particularly in operations that require close heat management. Rigidity and handling that support precision and productivity A solid 25 mm shank and a total length of 150 mm provide a balance between reach and stiffness, reducing vibration during engagement. The cutter features a 60 mm cutting length and three cutting edges, which distribute cutting forces evenly and enable efficient material removal while maintaining accuracy. The modest mass (approx. 0.591 kg) keeps handling straightforward during tool changes and minimises spindle load, making the tool body suitable for both roughing and semi-finishing passes where controlled deflection is important. Practical assembly and maintenance to reduce downtime The tool uses standard fixing hardware for straightforward service: retention screws are M3x7, tightened with a Torx T8 key, allowing quick insert changes and secure clamping. Compatibility with Korloy WNMX 09T3 indexable inserts ensures a wide choice of grades and chipbreakers for varied applications. For those unfamiliar, “indexable inserts” are replaceable carbide tips that locate into the cutter head; they can be rotated or exchanged without removing the entire cutter body, which simplifies maintenance and keeps production moving. For supply or application guidance on the Teknik Cutting Tools S804-1TM with internal coolant, contact Metav Werkzeuge in Emmerich for tailored advice and fast processing: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: S804-1TM SKU: S804-1TM Manufacturer: Teknik Makina Performance data Diameter: 30 mm Total length: 150 mm Shank diameter: 25 mm Cutting length: 60 mm Cutting edges: 3 Weight: 0.591 kg Special features Internal coolant For WNMX 09T3 indexable inserts Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M3x7 Product type: milling cutter FAQ What are the primary benefits of this milling cutter? The Milling Cutter S804-1TM (Teknik Cutting Tools, SKU S804-1TM) offers improved tool life and thermal control via internal coolant, together with a stiff 25 mm shank and balanced three-edged cutting for consistent machining results. Which inserts fit this cutter body? This cutter is designed for WNMX 09T3 indexable inserts; compatible grades and chipbreakers from Korloy can be fitted to match material and feed requirements. Is the tool suitable for finishing passes? Yes, the combination of a rigid shank, 30 mm body diameter and coolant delivery supports finishing and semi-finishing operations that demand surface quality and dimensional repeatability. How are inserts secured and changed? Inserts are fastened with M3x7 screws and require a Torx T8 key for tightening, enabling rapid indexation or replacement without extensive downtime. What should be expected regarding handling and spindle load? With an overall weight of approximately 0.591 kg and a compact geometry, the cutter offers moderate spindle load and manageable handling during tool changes, while delivering the stiffness needed for accurate cuts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of reliable internal coolant, a 25 mm shank and a 30 mm cutting diameter for consistent T‑slot production; order the item directly via Metav Werkzeuge or consult our specialists for application advice. T-slot cutter for TCMT 1102 indexable inserts — 30 mm, internal coolant (Teknik Makina) T-slot cutter for precision machining of T‑slots and keyways, designed for industrial milling with TCMT 1102 indexable inserts. 30 mm diameter for robust T-slot cutting Internal coolant for improved tool life 25 mm shank for stable spindle clamping Four cutting edges for consistent material removal Increase machining uptime with coolant-through tool design The tool combines a 30 mm diameter cutting head with built‑in internal coolant, enabling uninterrupted evacuation of heat and chips at the cutting zone. This design reduces thermal stress on inserts and the machine spindle, translating into longer intervals between indexings and fewer process interruptions. For production environments that prioritise cycle stability and repeatable slot geometry, the coolant‑through capability supports higher feed consistency and improved surface finish compared with external coolant alone. The result is measurable productivity gains for repetitive T‑slot operations. Robust shank and insert interface for secure clamping Equipped with a 25 mm shank and a dedicated fastening design for TCMT 1102 indexable inserts, the cutter provides a rigid connection to the toolholder and a secure seat for the insert screw (Torx T8, M2.5 x 5.5). The cutter’s four cutting edges and a 55° cutting angle balance chip formation and cutting forces, promoting even wear across the insert and predictable tool life. The specified 50 mm cutting length on the shaft and total length of 150 mm support a range of slot depths while maintaining stability in chucks and collets. These mechanical attributes reduce vibration and enhance dimensional control in series production. Practical application guidance and supply reliability Designed and manufactured by Teknik Makina and stocked by Metav Werkzeuge, the cutter fits into standard production workflows where TCMT inserts are preferred. The tool’s specifications—compact mass (0.521 kg) and standard Torx drive—allow straightforward insert changes on the shop floor. For customers seeking supply continuity and clear procurement, Metav offers consolidated sourcing and expert consultation from Emmerich, ensuring that high‑precision tools arrive traceable and ready for installation. The combination of component robustness and logistical support helps to lower the overall cost of ownership through reduced downtime and predictable replenishment. Contact Metav Werkzeuge for tailored technical advice on Teknik Makina T‑slot cutters with internal coolant and to discuss suitable inserts and clamping options for specific applications. Technical Data Item: T-slot cutter for TCMT 1102 indexable inserts SKU: TKC168TM Manufacturer: Teknik Makina Label: 30mm T-Nut Fräser TCMT 1102 L150mm mit Innenkühlung eClass: 21180605 Facts Diameter: 30 mm Total length: 150 mm Shank diameter: 25 mm Cutting length (shaft): 50 mm Weight: 0.521 kg Cutting edges: 4 Cutting angle: 55° Torx key: T8 Torx screw: M2.5 x 5.5 Special features Internal coolant (coolant‑through) Compatible with TCMT 1102 indexable inserts Designed for stable spindle clamping Four cutting edges for even wear FAQ Which inserts are compatible with this cutter? The cutter is compatible with TCMT 1102 indexable inserts; the geometry and pocket are optimised for these insert types to ensure correct seating and chip control. Does the tool support coolant-through operation? Yes — this T‑slot cutter features internal coolant, enabling direct coolant delivery to the cutting zone for improved tool life and chip evacuation. What shank size and clamping are required for secure use? A 25 mm shank is specified; secure clamping in a matched collet or hydraulic chuck is recommended to maintain stability when using the TKC168TM cutter. How many cutting edges and what angle does the cutter use? The tool has four cutting edges and a 55° cutting angle, a combination that balances cutting force and chip formation for consistent T‑slot machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise compatibility with S14–S40 indexable inserts and a secure Torx mounting for fast insert changes; the combination of a 25 mm shank and Ø30 mm cutting diameter ensures stable clamping and reliable machining reach. Order the cutter directly via Metav Werkzeuge or ask our consultants for tailored selection guidance. Teknik Makina Thread Milling Cutter DC215TM — compatible with S14, S21, S30 and S40 indexable inserts, Ø30 mm The Thread Milling Cutter DC215TM is a compact indexable insert cutter engineered for thread milling applications where fast insert changes and solid clamping are required For S14, S21, S30 and S40 inserts Ø30 mm cutting diameter 25 mm shank diameter Torx M4x10 fastening (T15) High compatibility that reduces tooling complexity The indexable inserts concept allows multiple thread forms to be produced with one holder, which reduces tooling complexity and stock levels. Built to accept S14, S21, S30 and S40 indexable inserts, the tool offers direct interchangeability with established insert families. This compatibility supports a streamlined workflow and simplifies planning for production environments where quick reconfiguration is essential. Secure mounting for repeatable accuracy A robust 25 mm shank promotes rigid clamping in standard toolholders and minimises vibration at the cutting zone, while the Torx M4x10 fastening with a T15 key secures the insert confidently. The secure Torx retention reduces the risk of insert movement under cutting forces and enables fast, repeatable insert changes, which lowers setup time and helps maintain consistent thread quality across batches. Practical dimensions for workshop use With a Ø30 mm cutting diameter and an overall length of 108 mm, the holder offers a balance between reach and rigidity. The geometry provides sufficient clearance for many common thread-milling operations without compromising stiffness. The combination of compact length and standard shank diameter supports compatibility with a wide range of toolholders and turning or milling spindles. Economic advantages through indexable tooling Using indexable inserts with this cutter reduces per-thread consumable costs because inserts are rotated or replaced individually rather than replacing the entire cutter. The design therefore promotes lower inventory costs and faster turnaround when a cutting edge is worn. For operations emphasising uptime and predictable maintenance, the DC215TM delivers a cost-efficient path to consistent thread production. For selection advice on the Teknik Makina thread milling system and to check suitability for specific machine setups, contact Metav Werkzeuge in Emmerich for individual technical guidance: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: DC215TM Product: Thread milling cutter Compatible inserts: S14, S21, S30, S40 Torx screw: M4x10 Torx key: T15 Shank diameter: 25 mm Cutting diameter: 30 mm Overall length: 108 mm Manufacturer: Teknik Makina Core dimensions Cutting diameter Ø: 30 mm Shank diameter: 25 mm Overall length: 108 mm Torx screw: M4x10 Special features For S14, S21, S30 and S40 indexable inserts Torx fastening for secure clamping Indexable insert system for economical edge replacement SKU: DC215TM FAQ What insert types fit this cutter? The cutter accepts S14, S21, S30 and S40 indexable inserts, allowing use of standard insert geometries for varied thread profiles. Which toolholder shank is required? A 25 mm shank diameter is specified; the DC215TM is intended for toolholders compatible with a 25 mm shank to ensure secure clamping. How is the insert secured? The insert is fixed with a Torx M4x10 screw tightened with a T15 key, providing repeatable and secure retention during thread milling. Is the cutter suitable for long-reach operations? With an overall length of 108 mm and a Ø30 mm cutting diameter, the holder balances reach and rigidity for many workshop tasks; longer extensions should be evaluated for rigidity. Can worn inserts be replaced individually? Yes, the indexable design permits replacement of single inserts, reducing consumable waste and operational cost compared with monolithic cutters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from consistent dimensions and dependable fixing performance that streamline assembly operations and reduce rework. Order the U-washer directly via Metav Werkzeuge or ask our consultants if needed. U-washer BSP030TM — U-shaped fastening washer for secure assemblies | Teknik Makina A U-washer for general fastening and retaining tasks in workshop and industrial assembly applications, supplied by Teknik Makina *Consistent dimensional control for repeatable fits *Compact component with low handling weight *Designed for secure retention in standard assemblies *Suitable for integration with common fasteners Secure fixing for routine assemblies The U-shaped fastening element is engineered for reliable fastening where fastener clearance and controlled lateral support are required. Owing to precise stamping and finishing, this component delivers consistent dimensions that reduce variability in repetitive assembly tasks. Where a fastening element must maintain position under vibration or light shear, the shaped washer acts as a low-complexity retention aid, lowering the risk of loosening without altering the primary fastener torque. The part’s modest mass of 0.1 kg supports straightforward handling and predictable performance in pick-and-place workflows. Integration and compatibility within workshop processes Designed as a basic mechanical accessory, the component integrates easily into standard assembly sequences and fixtures. Its U-profile permits quick placement around shafts or studs without full disassembly, which shortens fixture time and simplifies maintenance cycles. For procurement and inventory control, the article is identified as SKU BSP030TM and can be stocked alongside other common washers and retaining parts to streamline replenishment. The uncomplicated geometry makes the element compatible with a wide range of metric fasteners and ensures straightforward interchangeability in mixed-tool environments. Dependable sourcing and quality assurance for daily operations Sourcing the component through an established channel adds an operational layer of confidence. Metav’s model of the democratisation of precision means accessible quality parts are available to workshops and industrial buyers alike, backed by a central quality filter at the Emmerich facility. This approach supports continuity of supply and provides traceability, which is particularly useful for customers who require consistent repeat purchases. The supplier’s track record — reflected in over 48,000 customers — underscores a history of reliable delivery and product conformity that lowers procurement risk. Practical handling, storage and procurement clarity The compact form factor reduces storage footprint and simplifies kitting for assembly lines; the small mass and uncomplicated shape enable efficient packaging and reduced transport bulk. Documentation and labelling use the SKU BSP030TM to ensure accurate part selection in procurement systems and picking lists. For production planners, the element serves as a straightforward, low-complexity component that supports both short-run and continuous manufacturing environments by reducing the need for specialised fasteners or bespoke retainers. For tailored supply and logistics from Metav Werkzeuge — order via the Emmerich hub or consult Metav’s specialists for compatibility guidance and delivery options Technical data Article number: BSP030TM Name: U-washer Manufacturer: Teknik Makina ECLASS: 21189290 Weight: 0.1 kg Facts Weight: 0.1 kg ECLASS: 21189290 Special features U-shaped retaining washer design Intended for fastening and retention tasks Compact handling and storage properties FAQ What is the primary purpose of this retaining element? The U-washer provides lateral retention and simplified placement around shafts or studs; the U-washer BSP030TM is intended for standard fastening and retaining tasks. Is the part compatible with metric fasteners and common assemblies? Yes, the component is compatible with common metric fasteners and is designed for integration into typical workshop and industrial assemblies. How heavy is the part and what does that mean for handling? The single piece weight is 0.1 kg, which means the component is easy to handle and imposes minimal additional load in kitting and transport. Can this component be stocked alongside other standard washers for fast replenishment? Yes, SKU BSP030TM is suitable for catalogue stocking and routine replenishment alongside other fasteners and washers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of an indexable solution that combines quick insert changes, precise 45° and 90° chamfering and a robust 16 mm shank for stable machining — order the tool directly via Metav Werkzeuge or consult the team for application advice. Chamfer Mill S336TM — Indexable chamfer cutter, Ø31 mm, 45°/90° (Teknik Makina) A Chamfer Mill S336TM engineered for economical chamfering with replaceable carbide inserts, ideal for production use where consistent edge preparation is required Indexable inserts TCMT 16T3 Two cutting edges for smooth chamfers 45° and 90° chamfer angles Ø31 mm cutting diameter, 16 mm shank Faster chamfering with economical insert tooling The S336TM is designed around indexable inserts (compatible with TCMT 16T3) to reduce per-edge cost and limit downtime when compared with solid tools. The insert system enables rapid seat changes and predictable wear cycles, which translates into measurable productivity gains on repetitive jobs. With a Ø31 mm cutting diameter and two cutting edges, the tool balances material removal with surface finish, allowing clearer planning of cycle times and tool budgets. Rigidity and repeatability for routine production A solid 16 mm shank and a 35 mm cutting height provide the mechanical stability needed to maintain consistent chamfer geometry across batches. The combination of shaft stiffness and the tool’s overall length (100 mm) reduces vibration and helps deliver repeatable chamfer dimensions in serial production. This stability supports predictable process control and lowers scrap rates by ensuring each chamfer meets dimensional expectations. Practical maintenance and assembly on the shop floor The clamping system uses a Torx screw M3.5x8.5 secured with a T15 key, allowing straightforward insert replacement without specialised fixtures. Fewer spare tools are required thanks to replaceable carbide tips, which keeps inventory lean and tool management simple. For customers seeking application data or adaptation to specific machines, Metav Werkzeuge provides technical documentation and advice to align the tool’s performance with workshop conditions. Contact Metav Werkzeuge for tailored advice on Teknik Cutting Tools’ Chamfer Mill S336TM — rely on local stock and application expertise from Emmerich; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S336TM Manufacturer: Teknik Makina Insert type: TCMT 16T3 Cutting diameter: 31 mm Shank diameter: 16 mm Total length: 100 mm Cutting height: 35 mm Number of cutting edges: 2 Chamfer angles: 45° / 90° Torx screw: M3,5x8,5 Torx key size: T15 Weight: 0.204 kg Facts Ø31 mm 16 mm shank 100 mm total length 35 mm cutting height 2 cutting edges 45° / 90° angles 0.204 kg Special features For indexable inserts TCMT 16T3 Two cutting edges Chamfer angles 45° and 90° Torx screw M3,5x8,5 (T15) FAQ Which inserts fit the chamfer mill S336TM? The S336TM is specified for TCMT 16T3 indexable inserts; these inserts are the intended fit for Teknik Makina’s chamfer cutter. What chamfer angles can be produced? This chamfer cutter offers fixed 45° and 90° geometries, enabling standard edge preparation and countersink-style chamfers where required. What are the shank and cutting diameter dimensions? The tool has a 16 mm shank and a Ø31 mm cutting diameter, providing a balance of rigidity and cutting capacity for common machining set-ups. How is the insert secured and replaced? Inserts are clamped using a Torx screw M3.5x8.5 tightened with a T15 key, allowing quick replacement and secure retention during machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise chamfer geometry, a robust 16 mm shank and compatibility with standard indexable inserts for consistent results in series production — order the Chamfer cutter S339TM directly via Metav Werkzeuge or ask our consultants if needed. Chamfer cutter S339TM – indexable chamfering cutter, Ø31 mm, 16 mm shank (Teknik Makina) The Chamfer cutter S339TM is a compact indexable cutter designed for accurate chamfering on milling machines; it supports TCMT 16T3 inserts and offers selectable chamfer angles for versatile component finishing. Ø31 mm diameter, 2 cutting edges Shank ø16 mm for secure clamping 35 mm cutting height for deep chamfers Compatible with TCMT 16T3 indexable inserts Delivering precise chamfers with stable clamping The tool is built around a 16 mm shank that ensures secure clamping in standard toolholders, which reduces runout and contributes to repeatable edge quality. With a Ø31 mm cutting body and 2 cutting edges, the design focuses on balance between material removal and surface finish. The combination of diameter and shank dimension makes the cutter suitable for stable setups on vertical and horizontal milling machines, where vibration damping and concentricity are decisive for consistent chamfer geometry. Flexible chamfer angles for application variety Two chamfer geometries—60° and 120°—are available through the cutter's insert arrangement, enabling a choice between sharper and broader chamfers without changing the tool body. The 35 mm cutting height gives scope for deeper chamfers in fewer passes, improving cycle times. Using TCMT 16T3 indexable inserts standardises tool maintenance: worn inserts are replaced quickly, restoring tool performance with minimal downtime and predictable operating costs. Simple serviceability and low downtime The cutter uses a single clamping screw configuration (Torx screw M3.5x8.5 secured with T15) for insert retention, which simplifies changeover and reduces tool-change times on the shop floor. The indexable insert concept avoids grinding or rehoning operations and supports fast, reliable maintenance routines. The modest tool mass of 0.213 kg lowers inertia during spindle acceleration and deceleration, which can contribute to smoother machining cycles and reduced spindle load during frequent stops and starts. Why supply chain reliability matters for production Sourcing the cutter through an established partner brings operational advantages beyond the tool's geometry: central warehousing and a tested quality filter reduce the risk of inconsistent batches and delivery delays. Metav’s provision of technical information and stocked accessories supports planning and ensures the cutter is ready for immediate use in standard setups. Confidence in supply continuity is critical when replacing inserts or scaling production runs. Contact Metav Werkzeuge for tailored technical advice on integrating the Chamfer cutter S339TM into existing toolsets or to arrange a purchase via their Emmerich warehouse; phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: S339TM Manufacturer: Teknik Makina Product name: Chamfer cutter (Fasenfräser) eCl@ss: 21180806 ETIM: EC011860 Core data Diameter: 31 mm Shank diameter: 16 mm Cutting height: 35 mm Overall length: 100 mm Number of cutting edges: 2 Weight: 0.213 kg Chamfer angles: 60° / 120° Special features For indexable inserts: TCMT 16T3 Torx screw: M3.5x8.5 Torx key size: T15 Designed for quick insert replacement Two-angle chamfer capability FAQ What type of inserts does the cutter use? The Chamfer cutter S339TM accepts TCMT 16T3 indexable inserts, enabling rapid replacement and standardised insert sourcing. Which chamfer angles are available with this tool? The cutter provides chamfer geometries of 60° and 120°, allowing selection between narrow and wide chamfers without changing the tool body. What are the key dimensions to check for holder compatibility? Check the 16 mm shank diameter and the overall length of 100 mm when selecting a compatible toolholder for the S339TM. How many cutting edges does the tool have and what is the impact? The tool has 2 cutting edges, which balance material removal rate and surface finish while keeping the design compact for stable machining. Is specialised tooling required to change inserts? Insert changes require a Torx T15 key and the specified Torx screw M3.5x8.5, which simplifies maintenance on the shop floor. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a stable 32 mm shank and an effective 93 mm cutting length that deliver consistent medium‑diameter holes with reduced set‑up time; order the indexable drill body U172TM directly via Metav Werkzeuge or ask our consultants for tailored advice. U172TM indexable drill body — Ø 31 mm, 93 mm cutting length (Teknik Makina) The U172TM indexable drill body is an engineered solution for efficient, repeatable drilling with Korloy insert compatibility, designed for production and workshop environments that demand quick insert changes and stable clamping Indexable system for fast insert change Ø 31 mm for medium‑diameter holes 93 mm effective cutting length 32 mm shank for secure clamping Precision and productivity on the shop floor The U172TM combines a Ø 31 mm cutting diameter with a 93 mm cutting length to balance reach and rigidity, making it suitable for repetitive drilling tasks where consistent hole size and tool life matter. The 32 mm shank provides secure clamping in standard holders, reducing vibration and improving hole quality. Compatibility with industry inserts ensures that the system performs predictably across batches, so setups remain efficient and scrap is minimised. The constructive choices support a higher material‑removal rate while maintaining dimensional stability. Fast insert changes for lower machining costs This indexable design accepts WCM‑06T3 inserts, allowing rapid insert change without the need to regrind solid drills. The insert system reduces tool preparation time and cuts down on downtime between operations; worn cutting edges are replaced in seconds, not hours. Using standard Korloy inserts also simplifies stock management and offers flexibility in selecting grade and coating for different workpiece conditions. The result is a practical route to lower running costs and predictable machining cycles. Consistent integration and robust handling With an overall length of 185 mm and a clamping length of 58 mm, the tool balances accessibility and stiffness for typical production setups. The unit weight of 0.872 kg reflects a robust construction that contributes to steady performance under load. Its design is straightforward to integrate into existing toolholders and machining programmes, supporting efficient tool‑change routines and repeatable pocketing. Clear compatibility with Korloy inserts simplifies procurement and long‑term maintenance planning for the workshop. For reliable indexable‑drilling solutions from Teknik Cutting Tools, contact Metav Werkzeuge in Emmerich for personalised technical advice and rapid supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U172TM Manufacturer: Teknik Makina Designation: Vollbohrer (indexable drill body) Insert manufacturer compatibility: Korloy Compatible insert type: WCM‑06T3 Core technical data Diameter: 31 mm Overall length: 185 mm Cutting length: 93 mm Shank diameter: 32 mm Clamping length: 58 mm Weight: 0.872 kg Special features Indexable insert system Quick insert replacement Designed for secure clamping and repeatable drilling FAQ Which insert type fits this drill body? The U172TM indexable drill body accepts WCM‑06T3 inserts and is specified for Korloy‑type indexable cutting tips. What is the effective cutting length? The tool provides an effective cutting length of 93 mm, giving extended engagement while retaining rigidity. What shank size and clamping length are required? A 32 mm shank diameter with a clamping length of 58 mm is provided to ensure stable mounting in common toolholders. Is the tool compatible with Korloy inserts? Yes — the design is compatible with Korloy inserts, specifically the WCM‑06T3 grade and form. What is the SKU and overall length of the tool? SKU U172TM has an overall length of 185 mm and a unit weight of 0.872 kg for easy planning of tool balances and handling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact design that combines a 31 mm tool diameter with a sturdy 25 mm shank for stable parting operations; precise 4 mm cutting width and a 6 mm maximum plunge depth keep material loss to a minimum. Order the parting clamp holder directly via Metav Werkzeuge or consult our specialists for application advice. Parting clamp holder K906TM — 31 mm diameter, 200 mm overall length (Teknik Makina) Parting clamp holder K906TM designed for secure clamping of parting inserts in left-hand cutting applications, suited to medium-reach turning and controlled parting operations 31 mm tool diameter 25 mm shaft diameter Left-hand cutting direction Compatible with Korloy inserts Precision and rigidity for consistent parting performance The compact parting clamp holder delivers a reliable combination of stiffness and reach thanks to its 25 mm shank and 200 mm overall length, which reduce deflection during cut-off operations. With a clear specification for diameter (31 mm) and a balanced mass (approx. 0.783 kg), the tool provides a dependable baseline for repeatable process parameters. The robust construction minimises chatter and contributes to predictable tool life, aiding planners who prioritise process stability and consistent cycle times over frequent rework. Minimal material loss and controlled plunge for efficient throughput A narrow 4 mm cutting width and a 6 mm maximum plunge depth make this holder particularly efficient where material conservation and precise parting are important. The slender cutting edge reduces swarf volume and cutting forces, while the 18.2 mm cutter-head width offers secure insert support for clean separation. Supplied fixing components — M5x16 clamping screw and 4 mm Allen key — simplify setup and reduce auxiliary tooling requirements, helping workshops accelerate machine changeovers and maintain throughput. Compatibility, procurement ease and workshop reliability Compatibility with Korloy turning inserts simplifies procurement and provides access to a broad range of cutting grades and geometries for different workpiece materials. The item is identified as K906TM and is produced by Teknik Makina, making it straightforward to specify in procurement lists and ERP systems. Sourcing through Metav Werkzeuge ensures centralised ordering, quick clarification of technical questions and the benefit of a European distribution hub that supports reliable delivery and inventory transparency. Discuss application suitability and secure supply via Metav Werkzeuge — reference Teknik Makina parting clamp holder K906TM when enquiring by email at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Article number: K906TM Product: 31 mm parting clamp holder Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY Facts Diameter: 31 mm Shank diameter: 25 mm Overall length: 200 mm Cutting height: 40 mm Cutting width: 4 mm Max plunge depth: 6 mm Tool head width: 18.2 mm Weight: 0.783 kg Special features Left-hand cutting direction Compatible with Korloy inserts Clamping screw: M5x16 Allen key: 4 mm FAQ Which inserts fit this holder? The holder is compatible with Korloy parting inserts; specify the parting clamp holder K906TM by Teknik Makina when selecting the matching insert geometry. Is the cutting direction left or right? This tool is manufactured for left-hand cutting operations and is marked accordingly to ensure correct mounting and chip flow. What is the maximum parting depth? The maximum plunge depth is 6 mm, suitable for typical slotting and parting-off tasks that require limited engagement. What accessories are supplied with the tool? The delivery includes the M5x16 clamping screw and a 4 mm Allen key for secure insert clamping and straightforward setup of the K906TM holder. What are the shank and overall length dimensions? Shank diameter is 25 mm and the overall length is 200 mm, offering a balance of reach and rigidity for medium-reach turning applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Characteristics: Order Number: K612TM Item: Groving Holder usable with 4C MGM Indexable Inserts the Hersteller's Korloy Brand: Teknik Makina ISO Code: S25R 4C-R MGM Metric Information: Diameter: 31mm Weight: 0.783kg Total length: 200mm Cutting Height: 40mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Combining a stable 31 mm cutting diameter with a 124 mm effective cutting length and a 32 mm shank yields a reliable drill solution that reduces tool change frequency and maintains hole quality; order directly via Metav Werkzeuge or consult the technical advisors for specification matching. Indexable insert drill body U631TM — 31 mm diameter, 32 mm shank (Teknik Makina) Indexable insert drill body U631TM for precision holemaking in CNC applications, designed for use with industry-standard indexable inserts and rigid toolholders 31 mm cutting diameter 124 mm effective cutting length 32 mm shank diameter Compatible with Korloy WCM-06T3 inserts 216 mm overall length Precision that reduces rework and preserves cycle time The U631TM drill body combines a large cutting diameter with an extended cutting length to deliver consistent results across longer holes. The 31 mm nominal diameter and 124 mm cutting length mean fewer tool passes on deep holes, which helps to reduce set-up time and minimises the risk of cumulative errors. As an indexable insert system, only the worn insert requires replacement when cutting edges dull; the body remains in service, lowering consumable costs and simplifying maintenance logistics. The result is measurable process stability and a reduced incidence of rework in serial production. Rapid insert changes and standardised clamping for minimal downtime Maintenance routines are simplified by the compatibility with WCM-06T3 inserts from Korloy and a standardised 32 mm shank. The 58 mm mounting length secures the tool reliably in common holders, supporting repeatable concentricity and faster set-up. Spare-part inventories benefit from this standardisation: keeping a small stock of replacement inserts allows immediate edge renewal without the need for full-tool replacement. Overall, the modular concept promotes throughput continuity and lowers the effective cost per hole in medium-volume production environments. Robust dimensions and stable cutting behaviour for predictable tool life With an overall length of 216 mm and a mass of approximately 0.981 kg, the tool exhibits a balance between reach and rigidity that helps to control runout and vibration in ordinary machining conditions. The distinction between cutting length and total length ensures the active zone is optimised while the shank provides secure clamping. These dimensional details are crucial: correct clamping and appropriate holder selection preserve the geometry of the cutting edge, which in turn supports consistent surface quality and longer insert life. Technical teams unfamiliar with insert tooling will find the terms straightforward once the benefits of replaceable cutting edges are considered. Streamlined procurement and technical backing from Metav Sourcing the U631TM through Metav Werkzeuge links the tool to a distribution partner that stands for dependable supply and domain expertise. Metav’s Emmerich location acts as a quality filter for the European market, supporting a broad offering that reduces supplier complexity. The commercial advantage is practical: centralised procurement from a partner with decades of industry experience and a wide product range simplifies stocking decisions and ensures faster replenishment. For complex specifications or integration into existing toolsets, Metav’s technical advisors can offer application-focused guidance and help align the drill body with production goals. Contact Metav Werkzeuge today for tailored technical advice on the Teknik Makina U631TM indexable insert drill body and reliable supply from Emmerich – eMail info@metav-werkezeuge.com or call +49 2822 7131930 Technical data Article number: U631TM Manufacturer: Teknik Makina Designation: Indexable insert drill body (Vollbohrer) eClass: 21180201 Core measurements Cutting diameter: 31 mm Effective cutting length: 124 mm Shank diameter: 32 mm Mounting length: 58 mm Overall length: 216 mm Weight: 0.981 kg Special features Compatible insert type: WCM-06T3 Compatible insert manufacturer: Korloy Indexable insert system for edge replacement Files linked for reference: 2 items FAQ Which insert type fits this drill body? The drill body accepts WCM-06T3 indexable inserts; Korloy is the specified insert manufacturer for this configuration. What are the key dimensions to check for holder compatibility? Check the 32 mm shank diameter and the 58 mm mounting length to ensure secure clamping in the chosen toolholder. How does the indexable system reduce operating costs? With the indexable concept used in the U631TM, only the worn insert needs replacement, which reduces consumption of complete tools and lowers cost per hole over time. Is the drill body suitable for deep-hole applications? The 124 mm effective cutting length and 216 mm overall length offer extended reach; suitability for a specific deep-hole task should be validated against machine and holder rigidity. How is runout and hole quality maintained? Consistent clamping on the 32 mm shank and correct holder selection help control runout; replacing inserts when edge wear appears keeps hole quality stable. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Engineered for reliable indexable holemaking: robust shank stability and simple insert replacement ensure predictable tool life and lower running costs. Order via Metav Werkzeuge for assured European stock and consult their specialists for application guidance. Teknik Makina indexable drill body U831TM – Ø31 mm, 32 mm shank The Teknik Makina indexable drill body U831TM is a heavy-duty indexable drilling solution for industrial holemaking, designed for use with SPMG 0904 inserts in production and workshop environments. Ø31 mm drilling diameter, 93 mm cutting length 32 mm shank for secure clamping Compatible with SPMG 0904 indexable inserts Robust 185 mm overall length, industrial weight 0.884 kg Consistent hole quality for production runs The indexable drilling concept delivers repeatable results and cost efficiency by allowing the cutting edges to be replaced independently of the tool body. Built around the SPMG 0904 insert format, this indexable drill body provides a predictable cutting cycle and reduced per-hole tooling expense compared with solid-carbide alternatives. In many batch and continuous operations the modular design leads to lower inventory value of cutting edges and simpler tool management, while maintaining the dimensional accuracy required for industrial components. Secure clamping and dimensional stability Critical dimensions are provided for machine setup and process planning: Ø31 mm nominal diameter, 93 mm cutting length, 32 mm shank, 58 mm shank length, and 185 mm overall length, with a mass of 0.884 kg. The 32 mm shank is intended for rigid fixture in standard toolholders and is clamped to minimise runout; the specified cutting length supports extended reach without compromising stability. The indexable design is engineered so that the insert pocket and clamping interface are the primary wearing elements, enabling cost-effective maintenance and predictable tool offsets for CNC programmes. Workflow advantages, compatibility and supply Compatibility with leading insert manufacturers such as Taegutec and YG-1 widens the choice of grades and geometries, allowing optimisation for materials and cutting conditions. The indexable drill body supports rapid insert changes, reducing downtime and easing maintenance routines in busy workshops. Supplied from Metav Werkzeuge’s European stock, the tool is positioned for reliable availability and straightforward procurement within industrial supply chains, supporting stable production planning and timely replenishment of cutting edges. For tailored technical advice or to secure supply of the Teknik Makina U831TM indexable drill body from Metav Werkzeuge, contact the Emmerich team by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to request a quotation or application recommendation. Technical data SKU: U831TM Manufacturer: Teknik Makina Product type: Indexable drill body Insert type: SPMG 0904 Compatible insert makers: Taegutec, YG-1 Numbers / Core technical data Diameter: 31 mm Cutting length: 93 mm Shank diameter: 32 mm Shank length: 58 mm Overall length: 185 mm Weight: 0.884 kg Special features Indexable design for replaceable cutting edges Compatible with SPMG 0904 indexable inserts Suitable for industrial drilling applications FAQ Which insert format does this tool use? The Teknik Makina U831TM indexable drill body is designed for SPMG 0904 inserts and accepts compatible grades from insert makers such as Taegutec and YG-1. What are the key dimensions for machine setup? For setup, note the U831TM features a 31 mm diameter, 93 mm cutting length, 32 mm shank diameter and a total length of 185 mm. Is the shank suitable for standard toolholders? The tool is supplied with a 32 mm shank intended for secure clamping in standard industrial toolholders and collet systems. How does the indexable design benefit workshop operations? The indexable drill body reduces running costs and downtime by allowing inserts to be changed independently of the tool body, which simplifies inventory and maintenance for repetitive drilling tasks. Can the tool be used with different insert grades? Yes, the U831TM supports a range of insert grades available for SPMG 0904, enabling optimisation for various workpiece materials and cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the U130TM’s combination of a 31 mm cutting diameter, a 32 mm precision shank and a 62 mm cutting length to keep drilling cycles stable and predictable; order the tool via Metav Werkzeuge or consult the specialists for application advice. U130TM Indexable Drill Body (31 mm / 32 mm shank) by Teknik Makina The U130TM indexable drill body provides a compact, high‑stability solution for insert drilling where consistent hole quality and quick insert changes are required Robust 31 mm body for industrial drilling 32 mm precision shank for secure clamping 62 mm cutting length for deeper holes Compatible with Korloy WCM-06T3 inserts Consistent hole quality through rigid design and measurable stability The U130TM is engineered with a focus on precision and repeatability: a 31 mm cutting diameter combined with a 32 mm shank reduces deflection under load and keeps runout low. The 62 mm effective cutting length gives a controlled engagement for many common drilling tasks while the tool’s mass and geometry contribute to stable chip formation. For production environments this translates into fewer rejects and a predictable hole finish, which supports planning and quality control in the workshop. Faster production cycles thanks to the indexable insert concept The modular, indexable system accepts WCM-06T3 inserts and is listed as compatible with Korloy indexable plates, allowing worn edges to be restored instantly by indexing or replacing a small insert rather than regrinding a complete tool. Reduced tool change time and lower maintenance complexity lead to improved machine uptime and simplified logistics for tooling inventories. The insert interface is designed to maintain positional accuracy so process stability is retained after each service action. Simple integration with common toolholding and machining setups Measured dimensions support easy integration: a 32 mm shank diameter and 58 mm holder engagement length ensure secure clamping in standard holders, while the total length of 154 mm provides the reach required for many spindle or turret arrangements. The compact footprint and defined mass help to balance dynamic behaviour during acceleration and deceleration phases, which is beneficial for high‑speed machining centres and turret lathes that demand steady tool performance. Workshop supply, expertise and reliable sourcing from Metav Selection of the right tool is supported by Metav’s technical know‑how and supply chain: the company operates a quality filter from Emmerich and offers a broad range of workshop tooling alongside pragmatic logistics. For complex applications, technical documentation, or to verify insert availability for a specific material or cycle, Metav’s team can provide measured assistance and documented specifications to aid process planning and procurement. Contact Metav Werkzeuge for a tailored technical consultation on the U130TM indexable drill body — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: U130TM Manufacturer: Teknik Makina Product type: Indexable drill body Compatible insert type: WCM-06T3 Compatible insert manufacturer: Korloy Key measurements Cutting diameter: 31 mm Shank diameter: 32 mm Cutting length: 62 mm Holder engagement length: 58 mm Overall length: 154 mm Weight: 0.775 kg Materials & compatibility Indexable insert system Korloy insert compatibility Designed for standard 32 mm shank holders FAQ Which inserts are required for the U130TM? The U130TM accepts WCM‑06T3 inserts; Korloy WCM‑06T3 plates are confirmed compatible with this drill body. What shank size must the holder accept? The holder must accept a 32 mm shank; the U130TM has a 32 mm precision shank for secure clamping. How deep can the U130TM cut effectively? The U130TM provides a 62 mm cutting length with a total length of 154 mm for sufficient reach in many setups. Is the U130TM suitable for short‑cycle production runs? Yes — the indexable insert concept on the U130TM supports quick insert changes, reducing downtime in short‑cycle and batch production. What machines is the U130TM intended for? The U130TM is designed for integration in machining centres and turret lathes that accommodate a 32 mm shank and require indexable insert solutions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable solution that combines quick insert changes, proven compatibility with major insert brands and a compact, rigid design for steady holemaking; order directly via Metav Werkzeuge or request tailored advice from our consultants. Indexable Insert Drill U931TM – Ø 31 mm, 62 mm cutting length (Teknik Makina) The Indexable Insert Drill U931TM is a precision drill body intended for industrial holemaking with replaceable SPMG 0904 inserts, suited to production environments requiring fast tool changes and consistent results Compatible with SPMG 0904 inserts Ø 31 mm cutting diameter 62 mm cutting length 32 mm shank, 58 mm clamping length Faster production through indexable inserts and reduced downtime The use of indexable inserts means only the cutters need replacement, reducing tool-change time and inventory costs while maintaining process stability. Compatibility with well-known insert families such as SPMG 0904 and support for brands from Taegutec and YG-1 ensures access to a wide range of grades and chipbreakers. This configuration is particularly effective in medium-to-high volume drilling operations where quick recovery after wear is crucial for keeping cycle times low and output consistent. Stable holemaking with a compact, rigid design A robust drill body with a Ø 31 mm cutting diameter and 62 mm cutting length provides a balance between reach and rigidity for repeatable hole quality. The 32 mm shank and 58 mm clamping length contribute to secure mounting and reduced vibration, while the overall length of 154 mm offers a practical working envelope for many machining centres. The relatively low mass (approx. 0.766 kg) supports rapid spindle acceleration and stable cutting dynamics, which together help to improve hole tolerances and surface finish. Simple maintenance and predictable tool life Replacing worn cutters rather than the complete tool body simplifies workshop logistics and cuts tooling costs over time. The drill body accepts standard triangular inserts, allowing the machining process to be tuned by selecting grades for different materials or cutting conditions. With its straightforward clamping arrangement and proven insert format, the tool is suited for systematic preventive maintenance strategies and reduces unplanned production stops, supporting a smoother manufacturing flow. For availability, technical matching or delivery from Teknik Cutting Tools components, contact Metav Werkzeuge for personalised advice and supply coordination — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U931TM Manufacturer: Teknik Makina Product name: Indexable insert drill (Vollbohrer) Model reference: U931TM Weight: 0.766 kg Core specifications Diameter: 31 mm Cutting length: 62 mm Overall length: 154 mm Shank diameter: 32 mm Shank/clamping length: 58 mm Features / Compatibility Suitable for indexable inserts type SPMG 0904 Compatible with inserts from Taegutec and YG-1 Designed for industrial drilling with replaceable cutters FAQ Which insert type fits this drill body? The drill body accepts SPMG 0904 indexable inserts, offering a common triangular format for flexible grade selection. Is the shank compatible with standard holders? The 32 mm shank diameter and 58 mm clamping length are designed for common toolholders used in machining centres and lathes. What is the effective cutting reach of the tool? The tool provides a cutting length of 62 mm within an overall length of 154 mm, suitable for medium-depth holemaking. Which brands of inserts can be used? Insert compatibility includes grades and manufacturers such as Taegutec and YG-1, enabling selection according to material and cutting conditions. How does this tool reduce workshop downtime? By using replaceable inserts, only the cutters are exchanged when worn, which shortens maintenance time and lowers spare-part inventory requirements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a tool that combines dependable insert compatibility, a substantial 31 mm cutting diameter and a long 124 mm cutting length to keep machining cycles productive and predictable; order the Indexable Insert Drill directly via Metav Werkzeuge or consult our specialists for application-specific advice. Indexable Insert Drill U731TM – Ø 31 mm, SPMG 0904 compatible (Teknik Makina) The Indexable Insert Drill U731TM is a production-oriented drilling solution for machining centres and toolholders that accept a 32 mm shank, offering extended cutting reach and secure clamping for repeatable bore quality. SPMG 0904 insert compatibility 31 mm cutting diameter for deep holes 124 mm effective cutting length 32 mm shank, 58 mm clamping length Efficient material removal with indexable inserts The use of indexable inserts delivers a cost-effective approach to repeated drilling tasks: the replaceable SPMG 0904 inserts minimise downtime compared with solid-carbide alternatives and allow quick reconditioning of the cutting edge. With a 31 mm diameter and a 124 mm cutting length, this tool is optimised for longer bores where sustained chip removal and thermal management are essential. The insert system also enables straightforward changeover of grades for different materials, supporting consistent cycle times and predictable tool life in a high-volume production environment. Compatibility that protects uptime Compatibility with major insert manufacturers such as Taegutec and YG-1 reduces supply-chain friction and simplifies toolroom logistics; matching insert stocks can be sourced from multiple suppliers without changing the holder. The combination of standard insert formats and a robust shank arrangement reduces setup complexity and the risk of extended downtime. For operations seeking predictable throughput, the ability to use widely available inserts delivers a clear economic advantage while keeping maintenance cycles short and controlled. Stable clamping for repeatable bore accuracy A 32 mm shank with a 58 mm clamping length provides secure retention in conventional toolholders, improving concentricity and minimising runout during drilling operations. The substantial overall length of the tool gives flexibility for deeper operations while the balanced design supports steady chip evacuation and stability, which in turn preserves insert life and reduces scrap rates. The tool’s near 1 kg mass contributes to steadiness in the cut without excessive inertial load on the machine spindle, aiding consistent bore quality across serial production runs. For precision drilling applications with Teknik Cutting Tools quality, contact Metav Werkzeuge for tailored insert recommendations, availability checks and technical guidance from our Emmerich-based team. Technical details SKU: U731TM Brand: Teknik Makina Insert type: SPMG 0904 Core technical data Diameter: 31 mm Cutting length: 124 mm Shank diameter: 32 mm Shank clamping length: 58 mm Overall length: 216 mm Weight: 0.974 kg Design & features Indexable inserts compatible Compatible with Taegutec and YG-1 inserts For machining centres and standard holders Robust shank for improved concentricity FAQ Which inserts fit this drill? The U731TM accepts SPMG 0904 indexable inserts; insert grades from Taegutec and YG-1 are compatible. What are the key dimensions to check for toolholder fit? Shank diameter 32 mm and clamping length 58 mm are the critical dimensions for holder compatibility. How deep can this drill cut effectively? The tool offers a cutting length of 124 mm with an overall length of 216 mm, suitable for extended bore operations. Is the insert included with delivery? Insert supply is not specified in the product data; confirmation of included items should be obtained via the product listing or Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com