Gibt es einen Hahn und Kolb Online Shop?

Benefit from a robust combination of precise 90° cutting geometry, compatibility with APXT 1003 indexable inserts and a rigid 25 mm shank for stable machining. Order the cutter directly via Metav Werkzeuge or consult our specialists for application advice. Schaftfräser S180-1TM – Indexable milling cutter for APXT 1003 inserts, 90° cutting geometry (Teknik Makina) A Schaftfräser designed for reliable shoulder milling and slotting in CNC environments, compatible with APXT 1003 indexable inserts and optimised for repeatable, square shoulders. Compatible with APXT 1003 inserts 90° cutting geometry for square shoulders Ø30 mm cutting diameter Shank Ø25 mm with 60 mm cutting length Delivering square shoulders and predictable results The tool’s defining feature is its 90° cutting geometry, which produces precise, square faces with minimal need for secondary finishing. Used with standard APXT 1003 indexable inserts, the cutter ensures consistent contact conditions and repeatable results across batches. The combination of rigid design and insert-based cutting reduces the variability associated with single-use cutters, supporting efficient process control and predictable part tolerances in production. Rigidity and chip control for stable machining With a Shank Ø25 mm and a Ø30 mm cutting diameter paired with 4 flutes, the cutter balances stiffness and chip evacuation for both slotting and face milling operations. The 60 mm cutting length and overall length of 150 mm maintain a compact working envelope while allowing sufficient reach where required. These geometric choices limit vibration and deflection, helping to extend insert life and improving surface finish on the workpiece. Fast indexable inserts and practical service features Designed for quick insert changes, the milling tool uses a M2.5x5.5 Torx screw secured with a T8 Torx key, making routine maintenance straightforward and time-efficient. Compatibility with Korloy-manufactured inserts offers flexibility in procurement and proven cutting grades for a variety of machining tasks. The tool’s balanced mass (approx. 0.61 kg) and secure clamping contribute to safe operation and reduced setup time, supporting a higher machine uptime and lower unit production costs. Speak to Metav Werkzeuge for tailored application support and secure supply of this Teknik Cutting Tools indexable milling cutter compatible with APXT 1003 inserts Technical Data Article number: S180-1TM Product: Schaftfräser for APXT 1003 indexable inserts Brand: Teknik Makina Compatible inserts manufacturer: Korloy Facts Cutting diameter: 30 mm Shank diameter: 25 mm Cutting length: 60 mm Overall length: 150 mm Flutes: 4 Cutting angle: 90° Weight: 0.61 kg eClass: 21180806 ETIM: EC011860 Special features Fits APXT 1003 indexable inserts Compatible with Korloy inserts Torx screw: M2.5x5.5 Torx key size: T8 FAQ Which inserts fit this cutter? The cutter accepts APXT 1003 indexable inserts; Korloy-manufactured inserts are compatible and commonly used with this tool. What cutting geometry does the tool provide? The tool offers a 90° cutting geometry, ideal for producing square shoulders and accurate face milling operations. What are the key dimensions to consider for toolholding? Important dimensions are shank Ø25 mm, cutting diameter Ø30 mm, cutting length 60 mm, and overall length 150 mm for proper toolholder selection. How are inserts secured and what tool is needed? Inserts are held by a M2.5x5.5 Torx screw; a T8 Torx key is specified for screw tightening and removal. What is the SKU and who manufactures the cutter? The milling cutter is listed as S180-1TM, manufactured by Teknik Makina and supplied via Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a modular, indexable milling solution that combines fast insert changes, robust shank dimensions and clear compatibility with Korloy APXT 1003 inserts — optimised for steady production cycles. Order directly via Metav Werkzeuge or request tailored advice from our consultants for seamless integration into workshop tooling. Shank Milling Cutter S150TM by Teknik Makina — 30 mm diameter, 4 flutes The Shank Milling Cutter S150TM is an indexable-insert milling tool engineered for medium-duty machining with APXT 1003 inserts, suitable for general industrial and workshop milling tasks 30 mm diameter, 4 cutting edges 25 mm shank for standard toolholders Designed for APXT 1003 indexable inserts Torx M2.5x5.5 clamp with T8 key Faster machining through indexable insert efficiency The S150TM is built around the APXT 1003 concept of replaceable indexable inserts, enabling rapid restoration of cutting performance without full-tool replacement. By using a toolbody with defined dimensions — 30 mm diameter and an overall length 100 mm — workshop throughput can be stabilised: worn inserts are indexed or replaced in minutes, which reduces machine downtime and keeps cycle times predictable. For operations seeking consistent component quality, the modular design delivers a clear productivity advantage. Precision shank and flute geometry for reliable results A firm clamping and correct shaft size are essential for repeatable accuracy. With a 25 mm shank and 4 flutes, the cutter balances rigidity with chip evacuation, making it appropriate for face and shoulder milling where surface finish and dimensional stability matter. The declared cutting length 40 mm gives a defined engagement zone; explained simply, that is the usable cutting portion before the shank, so routines and fixture setups remain consistent across batches. Compatibility with Korloy inserts is specified to ensure users select matching grades and geometries for the required materials. Robust clamping and simple maintenance reduce service time Fast and secure insert retention is provided via a Torx M2.5x5.5 screw and T8 key, a common and reliable fastening combination. This arrangement means insert changes are straightforward and reproducible, improving workshop ergonomics and safety during maintenance. The tool’s balanced specification and modest weight support stable spindle performance, while the standardised fixation helps maintain concentricity — an important factor when tolerances and tool life are considered in the overall cost-efficiency calculation. Practical fit for industry supply chains and workshop fleets This cutter is aimed at production environments and trade workshops that value predictable supply and compatibility. The tool’s standard dimensions and use of widely available APXT 1003 indexable inserts make it straightforward to stock and replace, aligning with procurement routines that favour parts interchangeability. Metav’s distribution approach further supports reliable delivery and acts as a quality filter for European customers, helping to make precision tooling accessible without compromise to performance. Contact Metav Werkzeuge for tailored guidance on integrating Teknik Makina’s S150TM shank milling cutter into existing tool inventories and to arrange dependable supply from Emmerich. Technical Data Article number: S150TM Manufacturer: Teknik Makina SKU: S150TM Compatible inserts: APXT 1003 Facts Diameter: 30 mm Shank diameter: 25 mm Cutting edges: 4 Cutting length: 40 mm Overall length: 100 mm Weight: 0.4 kg Special features For APXT 1003 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M2.5x5.5 Torx key size: T8 FAQ What inserts are compatible with this cutter? The S150TM accepts APXT 1003 indexable inserts; Korloy grades are listed as compatible for this tool body. What are the key dimensions to check for toolholder compatibility? Check the 25 mm shank diameter and the toolholder’s acceptance; the cutter’s 30 mm head diameter and 100 mm overall length are relevant for clearance and setup. How many cutting edges does the tool have and what is the cutting length? The tool features 4 cutting edges and a cutting length of 40 mm, which defines the effective machining zone. Which fastening parts are required for insert changes? Insert retention uses a Torx M2.5x5.5 screw tightened with a T8 key for secure and repeatable clamping. Is this cutter suitable for general workshop and industrial milling? Yes — the S150TM is designed for medium-duty milling tasks in both industrial and workshop environments where indexable inserts and standard shank dimensions are preferred. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, indexable solution that combines reliable clamping, simple insert replacement and material‑versatile performance; the combination of a 30 mm cutting diameter and a 25 mm shank ensures stable machining and predictable tool life. Order the cutter directly via Metav Werkzeuge or consult the Metav team for application advice. S170TM indexable insert milling cutter — compatible with APXT 1003 inserts, 30 mm diameter S170TM is a solid milling cutter designed for use with APXT 1003 indexable inserts; suitable for general milling tasks where fast insert changes and consistent results are required. Compatible with APXT 1003 indexable inserts 30 mm cutting diameter for robust milling 25 mm shank for secure clamping Torx screw M2.5x5.5, T8 key included High productivity through indexable insert technology The body is designed for efficient use of indexable inserts, accepting APXT 1003 plates to reduce downtime and lower per‑cutting‑edge costs. By using replaceable cutting elements rather than solid carbide cutters, the system delivers steady productivity: operators benefit from rapid insert changes and uniform cutting geometry across multiple operations. The four‑edge configuration and 90° cutting angle give a dependable balance between material removal rate and surface finish, making the tool well suited to batch production and finishing passes alike. The S170TM body thus supports a predictable machining workflow and reduced tooling inventory costs. Stable clamping and repeatable runout for accurate milling A 25 mm shank and a compact overall length of 120 mm provide torsional stability in the holder, while the 40 mm cutting length limits overhang to maintain rigidity. Secure insert retention is achieved with the specified M2.5x5.5 Torx screw and matching T8 key, ensuring consistent seat contact and repeatable positioning after each insert change. These features reduce vibration and runout, which directly improves dimensional consistency and extends insert life. The tool weight of 0.487 kg contributes to controlled spindle loading and consistent acceleration/deceleration behaviour on CNC machines. Compatibility and workshop efficiency that lower operational risk Designed to accept inserts from established suppliers — compatible with Korloy APXT 1003 — the cutter integrates easily into existing tooling strategies and simplifies purchasing decisions. The four‑flute layout optimises chip formation for a broad range of workpiece materials where indexable milling is appropriate. With a compact footprint and standard fastening hardware, the cutter supports fast maintenance cycles and predictable changeover times, helping to reduce machine downtime and uphold production targets. The combination of standardised insert format and robust body design positions the product as a pragmatic choice for workshops seeking consistent throughput and lower life‑cycle costs. Contact Metav Werkzeuge for tailored application guidance and a precise quote based on machining requirements; expert advice and supply come directly from Metav Werkzeuge — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S170TM Manufacturer: Teknik Makina Facts Diameter: 30 mm Shank diameter: 25 mm Cutting length: 40 mm Overall length: 120 mm Cutting edges: 4 Weight: 0.487 kg Cutting angle: 90° Torx screw: M2.5x5.5 Torx key size: T8 Special features Compatible with APXT 1003 indexable inserts Suitable for Korloy APXT 1003 insert plates Four‑flute design Standardised fastening for quick insert changes FAQ Which insert type fits this cutter? The S170TM accepts APXT 1003 indexable inserts, making insert procurement straightforward and repeatable. What shank size is required for the tool holder? A 25 mm shank is specified for the cutter; compatible tool holders with a 25 mm bore achieve the intended rigidity. How many cutting edges are available per tool body? The cutter body features 4 cutting edges, offering a balance between material removal and surface quality. What fastening hardware is used to secure the inserts? Inserts are secured with a M2.5x5.5 Torx screw; a T8 Torx key is used for tightening. Is the cutter compatible with Korloy inserts? Yes — the tool is compatible with Korloy APXT 1003 inserts, enabling integration with widely used insert inventories. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of stable clamping, indexable-insert compatibility and a compact overall length for efficient milling cycles; the combination of a 25 mm shank and a 30 mm cutting diameter supports consistent surface quality and reduced vibration — Order the S306TM shank cutter directly via Metav Werkzeuge or ask our consultants if needed. S306TM shank cutter by Teknik Makina — 30 mm diameter, 3 cutting edges The S306TM is an indexable-insert shank cutter designed for machining with ADKT 1505 inserts, suited to general metalworking milling tasks where quick insert changes and stable performance are required Compatible with ADKT 1505 indexable inserts 30 mm cutting diameter for medium cuts 25 mm shank for stable clamping Three cutting edges for efficient metal removal Supplied with M4x10 Torx clamping screw T15 Stable clamping for consistent surface finish and tool life With a 25 mm shank and a compact 120 mm overall length, this cutter delivers reliable concentricity under typical milling conditions. The substantial shank diameter reduces deflection and vibration, which in turn helps to maintain a consistent surface finish and extends insert life. For production environments and busy workshops alike, the resulting decrease in scrap and rework represents a measurable operational advantage and supports shorter cycle times. Fast insert changes and secure clamping for minimal downtime The design accepts ADKT 1505 indexable inserts, enabling rapid reconditioning of the cutting edge without the need to replace the whole tool. Compatibility with ISCAR-type inserts broadens sourcing options. A M4x10 Torx clamping screw paired with a T15 driver ensures a secure, repeatable seat for each insert, simplifying changeovers and reducing the risk of incorrect installation. This arrangement translates into shorter maintenance intervals and predictable machine availability. Efficient material removal with balanced geometry The tool’s 30 mm diameter combined with three cutting edges is tuned for steady metal removal at sensible feed rates. A cutting length of 45 mm affords good engagement for through and face-milling tasks while preserving rigidity. The assembly’s modest mass of 0.466 kg contributes to rotational balance, supporting smoother operation at higher spindle speeds and improving chip evacuation during continuous milling. Practical fit for workshops and production lines Designed to be a pragmatic addition to a tooling set, the cutter supports common milling cycles and reduces the number of full-tool replacements by using indexable inserts. The combination of indexable-insert technology and a stable shank reduces both tooling costs and inventory complexity. For maintenance teams and production planners, this means fewer disruptions and a clearer cost-per-cut calculation, making the cutter a sound choice where uptime and predictable performance matter. For availability, insert compatibility advice or to discuss batch supply options, contact Metav Werkzeuge — Metav Werkzeuge is ready to advise by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: S306TM Manufacturer: Teknik Cutting Tools / Teknik Makina Facts Diameter: 30 mm Shank diameter: 25 mm Cutting length: 45 mm Overall length: 120 mm Cutting edges: 3 Weight: 0.466 kg Special features For ADKT 1505 indexable inserts Compatible with ISCAR inserts Torx clamping screw M4x10 Torx key size T15 Designed for indexable-insert milling FAQ What insert type does the cutter use? The cutter accepts ADKT 1505 indexable inserts; this format enables quick insert replacement and cost-effective edge refresh. Is the tool compatible with ISCAR inserts? Yes, the shank cutter is compatible with inserts from ISCAR, offering broader sourcing and reduced supply risk. What are the key dimensions to check for toolholder compatibility? Important dimensions are the 25 mm shank diameter, 30 mm cutting diameter and 120 mm overall length to ensure correct clamping and clearance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of reliable rigidity and convenient insert compatibility to keep internal turning processes productive; the combination of a 32 mm shank with a 300 mm overall length delivers stable chipping and longer insert life. Order the tool directly via Metav Werkzeuge or consult the Metav team for application-specific advice. Boring bar K183-1TM — S32T ST-CR toolholder for TC-- 16T3 indexable inserts, Ø30 mm cutting diameter (Teknik Makina) The Boring bar K183-1TM is a right-hand toolholder designed for precision internal turning and boring with TC-- 16T3 indexable inserts, suited to workshop and production environments where repeatable bore quality and fast insert changes are required. Boring bar S32T ST-CR for TC-- 16T3 inserts 30 mm cutting diameter, 300 mm overall length 32 mm shank diameter for stable clamping 60° cutting angle, 60 mm cutting height Engineered for stable, high-precision boring This toolholder is built around stable clamping and a robust shank geometry: the 32 mm shank (S32T) increases stiffness at the tool post and reduces resonance during cutting. Less vibration translates directly into higher accuracy and improved surface finish when boring internal diameters. The S32T ST-CR designation denotes the shank size and tool series, making it straightforward to match with compatible toolposts and copyholders. For production contexts this results in fewer reworks and more consistent bore tolerances. Compatibility that speeds up tool changes and reduces downtime Designed for use with TC-- 16T3 indexable inserts, the K183-1TM enables quick insert indexing and replacement without full regrinding or complex set-ups. The right-hand cutting orientation and a 60° cutting angle give predictable chip flow for many internal turning operations. Using standardised inserts shortens changeover times and simplifies inventory management, contributing to measurable gains in throughput for batch or serial production. Robust dimensions for industrial use and prolonged insert life With a 300 mm overall length and a Ø30 mm cutting diameter, this boring bar balances reach with rigidity. The 60 mm cutting height aligns insert positioning for secure clamping, while the tool’s mass (1.961 kg) underlines its industrial weight class — beneficial where stable cutting forces are required. These characteristics help protect inserts from chatter-induced wear and extend insert life, improving cost-efficiency across long runs. The result is a practical toolholder that supports repeatable, productive machining cycles. Contact Metav Werkzeuge today for detailed compatibility checks and fast supply from Emmerich — ask about the K183-1TM boring bar and receive tailored advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: K183-1TM Manufacturer: Teknik Makina Designation: ST-CR for TC-- 16T3 Indexable Inserts ISO designation: S32T ST-CR Core specifications Shank diameter: 32 mm Cutting diameter: 30 mm Cutting height: 60 mm Overall length: 300 mm Cutting angle: 60° Cutting direction: right Weight: 1.961 kg Features & compatibility Compatible with TC-- 16T3 indexable inserts Right-hand cutting orientation Clamping designation: 16 ISO toolholder series S32T ST-CR FAQ Which inserts fit this toolholder? The K183-1TM boring bar from Teknik Makina is designed for TC-- 16T3 indexable inserts, enabling straightforward insert changes and standard tooling management. What does S32T ST-CR mean for the shank? S32T ST-CR denotes the 32 mm shank series and the toolholder type; in practice it indicates compatibility with 32 mm toolposts and the ST-CR mounting standard used by Teknik Makina. Is this a right-hand or left-hand tool? This boring bar is configured for right-hand cutting, making it suitable for standard internal turning directions in most lathes and CNC boring heads. What are the key dimensions to check before ordering? Important dimensions are the 32 mm shank diameter, Ø30 mm cutting diameter and 300 mm overall length; verifying these against the machine’s toolpost and bore access ensures correct fit-up. Will this toolholder reduce insert wear? The K183-1TM’s rigid 32 mm shank, correct cutting height and 60° cutting angle help to reduce vibration and improve insert seating, which contributes to extended insert life and more consistent bore quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust indexable-insert milling solution that combines a 25 mm shank for secure clamping, a compact 30 mm cutter diameter for accessible machining and a 90° cutting angle for square shoulders; order the Teknik Makina S188-1TM via Metav Werkzeuge or consult our specialists for application guidance. S188-1TM – Indexable-insert milling cutter, 30 mm diameter, 25 mm shank (Teknik Makina) The S188-1TM is a shank-mounted milling cutter designed for use with APXT 1003 indexable inserts, suited to operations requiring a square cutting geometry and precise toolholding. Compatible with APXT 1003 indexable inserts 25 mm shank diameter for secure clamping 30 mm cutter diameter for compact operations Four cutting edges for consistent material removal Stable clamping and precision geometry for repeatable results The tool’s 25 mm shank and 30 mm diameter deliver a stable interface with standard tool holders, reducing runout and improving surface consistency during serial runs. The cutter’s 90° cutting angle produces true square shoulders without additional finishing passes, which supports shorter cycle times and predictable tolerances. Built for repeatability, the design helps maintain machine efficiency where consistent, dimensional results are required. Fast insert changes and pragmatic maintenance Designed for indexable-insert workflows, the cutter accepts APXT 1003 inserts and is compatible with Korloy blanks, enabling fast insert replacement and predictable cutting performance. Insert clamping uses a Torx M2.5x5.5 screw and a T8 key for secure, repeatable attachment, simplifying maintenance routines and reducing downtime. Indexable inserts lower running costs by allowing multiple edge changes per insert rather than replacing whole tools. Integration into machine shops and CNC centres With an overall length of 200 mm and a cutting length of 50 mm, the cutter balances reach with rigidity for a variety of set-ups. The tool mass of 0.845 kg contributes to stable cutting dynamics without excess inertia in standard milling spindles. The moderate dimensions and shank standardisation make the tool straightforward to integrate into existing tool lists, helping to streamline inventory while maintaining machining capability. Application fit and operational advantages The cutter’s geometry and insert system make it particularly suitable for operations that call for precise shoulder milling and facing where square edges and quick insert indexing are priorities. The four cutting edges allow even load distribution across the cutting circumference, improving surface quality and extending insert life under comparable cutting conditions. For shops aiming to combine productivity with economical tool usage, this indexable solution offers clear operational benefits. Choose Teknik Makina’s S188-1TM for stable, efficient indexable milling and contact Metav Werkzeuge for tailored supply and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S188-1TM Manufacturer: Teknik Makina Designation: Milling cutter for APXT 1003 indexable inserts Core dimensions Diameter: 30 mm Shank diameter: 25 mm Cutting length: 50 mm Overall length: 200 mm Number of cutting edges: 4 Weight: 0.845 kg Cutting angle: 90° Special features Compatible inserts: APXT 1003 Compatible insert manufacturer: Korloy Torx screw: M2,5x5,5 (M2.5x5.5) Torx key: T8 FAQ Which insert type fits this milling cutter? The cutter uses APXT 1003 indexable inserts; Korloy blanks are specified as compatible with the Teknik Makina S188-1TM. How is an insert fastened and changed? Inserts are secured with a Torx M2.5x5.5 screw; a T8 key is used for tightening and replacement on the S188-1TM. What toolholder size is required for safe clamping? A toolholder or collet suitable for a 25 mm shank is required to ensure proper clamping and to maintain the cutter’s stated runout performance. Is the cutter suitable for shoulder milling? Yes; the 90° cutting angle is engineered to produce square shoulders and is appropriate for facing or shoulder operations where perpendicular surfaces are required. What are the tool’s overall length and cutting reach? The S188-1TM has an overall length of 200 mm and a cutting length of 50 mm, providing a balance of reach and rigidity for many milling set-ups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from robust rigidity, precise indexable-insert compatibility and a compact overall length for predictable cycle times; the combination of a 25 mm shank and a Ø30 mm cutting diameter delivers secure clamping and consistent shoulder milling. Order the tool directly via Metav Werkzeuge or ask our consultants if needed. Shank cutter S804TM by Teknik Makina — for WNMX 09T3 indexable inserts, Ø30 mm, 3 cutting edges A Shank cutter S804TM designed for indexable-insert milling with WNMX 09T3 inserts, ideal for operations that demand secure clamping and reliable shoulder cuts in production and job-shop environments. Ø30 mm cutting diameter Compatible with WNMX 09T3 inserts 25 mm shank for rigid clamping Torx M3x7 fixing screw, T8 key High-rigidity geometry for repeatable machining The cutter’s 25 mm shank and compact total length 150 mm ensure minimal deflection during interrupted or shoulder milling, which translates into more predictable tolerances on every part. With a cutting diameter of 30 mm and three cutting edges, the design balances material removal and stability, helping to reduce chatter and improve surface finish. The 90° cutting angle is optimised for square-shoulder work, offering precise face contact and consistent step transitions on milled components. Fast insert changes and low maintenance downtime Designed for indexable-insert workflows, the system accepts WNMX 09T3 inserts and is compatible with Korloy grades, allowing standardisation across existing toolsets. The insert is secured with a Torx M3x7 screw and serviced with a T8 key, enabling quick, tool‑room-friendly changeover. Fewer full-tool replacements are required because worn cutting edges are swapped independently, improving spindle uptime and lowering running costs per edge while maintaining high process reliability. Predictable integration into CNC production lines A clear numerical specification—cutting length 60 mm, total length 150 mm, weight 0.59 kg—assists process planning and tool‑life calculation. The modest mass reduces centrifugal load and helps preserve spindle bearings in high-cadence operations. The combination of standard insert format and compact holder dimensions simplifies fixture layout and toolpath planning, making the cutter suitable for both serial production and smaller batch runs where consistent cycle times and tool-change simplicity are priorities. Practical procurement and compatibility advantages Specifying an indexable-insert holder such as this one helps centralise spare parts and reduces the need for many bespoke solid tools. The acceptance of widely available WNMX 09T3 inserts—plus Korloy compatibility—supports fast replenishment and predictable performance across supply chains. Clear technical details and standard fastening hardware support straightforward stocking decisions and easy replacement of consumable cutting edges, supporting long-term shop-floor efficiency and predictable throughput. For tailored advice on integrating the Teknik Cutting Tools shank cutter into production, contact Metav Werkzeuge in Emmerich for configuration support and supply — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: S804TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Cutting diameter: 30 mm Shank diameter: 25 mm Cutting length: 60 mm Total length: 150 mm Number of cutting edges: 3 Weight: 0.59 kg Cutting angle: 90° Special features For WNMX 09T3 indexable inserts Compatible with Korloy inserts Torx screw M3x7 Torx key size T8 Indexable-insert shank cutter design FAQ Which insert type does this cutter use? The holder is specified for WNMX 09T3 indexable inserts and is compatible with standard Korloy grades for that insert type. What are the key dimensions to plan for in the tool table? Key dimensions include a Ø30 mm cutting diameter, 25 mm shank, 60 mm cutting length and 150 mm total length for spindle‑to‑part clearance calculations. How is the insert secured and what tool is required? The insert is fixed with an M3x7 Torx screw; a T8 key is used for tightening and removal. Is the cutter suitable for shoulder milling? Yes, the 90° cutting angle and three‑edge configuration make the holder well suited to square‑shoulder milling where a defined step is required. Can standard shop tooling be used for replacement parts? Replacement inserts and the Torx M3x7 screws follow standard dimensions, easing procurement and spare‑part stocking for the holder (SKU S804TM). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, indexable solution that combines a 20 mm shank diameter with a 180 mm overall length and proven compatibility with DC-- 11T3 inserts for reliable turning results; order directly via Metav Werkzeuge or contact our consultants for application advice. Boring bar S20Q SDZCR — Indexable-holder for DC-- 11T3 inserts, 20 mm shank (Teknik Makina) The Boring bar S20Q SDZCR is a right-hand indexable toolholder designed for precision external and internal turning operations using DC-- 11T3 indexable inserts, optimised for stable chip control and consistent surface finish. S20Q SDZCR toolholder design 20 mm shank diameter for steady clamping Compatible with DC-- 11T3 indexable inserts 180 mm overall length for extended reach Stable machining through controlled geometry The boring bar is engineered to deliver consistent cutting performance thanks to its balanced geometry and a modest cutting angle (5°). The combination of a 20 mm shank and a 30 mm working diameter improves rigidity at the cutting point, reducing vibration and promoting repeatable tolerances. For workshops facing medium-reach turning tasks, this design lowers scrap rates and reduces the need for secondary finishing, translating into measurable process efficiency. Easy insert handling and versatile insert fitting Designed for standard indexable inserts, the holder accepts DC-- 11T3 plates, enabling quick index changes and minimal downtime. The toolholder’s 32 mm cutting height aligns the insert accurately with the machine centre, simplifying set-up and reducing the risk of misalignment. Clear insert compatibility reduces inventory complexity while allowing established grades and geometries to be used without modification, supporting predictable cycle times. Compact weight and reach for accessible machining With an overall length of 180 mm and a nominal weight of 0.498 kg, the holder combines reach with manageable mass for many lathe set-ups. The moderate mass aids in dynamic stability without overloading tool posts or turret stations, and the balanced proportions help maintain cutting conditions during feed and speed changes. The right-hand configuration is appropriate for conventional turning directions and helps ensure consistent chip evacuation when paired with the correct insert geometry. Practical benefits for production environments The toolholder’s compatibility with industry-standard inserts and its robust shaft dimensions make it suitable for workshops seeking cost-effective upgrades of existing tooling systems. Reduced set-up times, straightforward insert replacement and the ability to use common insert grades support productivity. The bar’s simple specification—20 mm shank, 32 mm cutting height, 30 mm diameter—facilitates rapid integration into tooling lists and CAM databases, supporting maintenance of process documentation and traceability. Contact Metav Werkzeuge for tailored tooling recommendations and request the Teknik Makina S20Q SDZCR boring bar (SKU K194TM) for immediate dispatch from Emmerich. Technical Data Article number: K194TM Manufacturer: Teknik Makina ISO designation: S20Q SDZCR SKU: K194TM Facts Shank diameter: 20 mm Overall length: 180 mm Working diameter: 30 mm Cutting height: 32 mm Cutting angle: 5° Weight: 0.498 kg Cutting direction: right Special features Compatible with DC-- 11T3 indexable inserts Designation for indexable inserts: SDZCR for DC-- indexable inserts Suitable for standard turning operations Balanced geometry for reduced vibration FAQ What inserts fit this boring bar? The S20Q SDZCR boring bar is compatible with DC-- 11T3 indexable inserts and is designed to accommodate that insert form for controlled chip formation. What is the shank size and why does it matter? The toolholder has a 20 mm shank diameter, which provides increased rigidity and reliable clamping in compatible toolholders and turrets. Is this holder right- or left-hand cutting? This holder is configured for right-hand cutting direction as supplied in the product specifications. What working diameter and cutting height are specified? The holder specifies a 30 mm working diameter and a 32 mm cutting height, ensuring the insert sits correctly relative to the machine centre. Will this bar suit extended reach applications? With an overall length of 180 mm, the bar offers extended reach for many machining tasks while maintaining manageable rigidity for standard turning operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a combination of rigidity and precise insert compatibility for steady internal turning; the left‑hand orientation and compact weight ensure stable cuts and easy handling — order the boring bar directly via Metav Werkzeuge or consult our advisors for application support. S20R DDUNL Boring Bar — left‑hand, for DN-- 1104 indexable insert (Teknik Makina) S20R DDUNL is a left‑hand internal turning tool for precision boring applications, designed to accept DN-- 1104 indexable inserts and engineered for repeatable, vibration‑resistant performance. Left‑hand cutting orientation Compatible with DN-- 1104 inserts Shaft Ø 20 mm for secure clamping Overall length 200 mm for deep reach Stable cutting performance for consistent bore quality The bar delivers rigidity through its compact geometry, reducing vibration and promoting a consistent surface finish in internal turning. With a Shaft Ø 20 mm and an external diameter of Ø30 mm, the toolholder offers a robust interface between machine and insert seat. The specified 93° cutting angle stabilises chip flow and helps maintain concentricity, which is especially relevant for repetitive production runs where dimensional consistency is a priority. Efficient insert use and simple rework procedures Designed to accept DN-- 1104 indexable inserts, the tool minimises downtime during insert changes and supports economical cutting strategies. The 50 mm cutting height ensures an adequate contact area for the insert, while the modest mass of 0.508 kg keeps the assembly well balanced on the turret. For workshops running mixed batches, compatibility with a common insert family reduces tooling inventory and simplifies set‑up procedures. Practical integration into workshop workflows The left‑hand orientation and the ISO designation are suited to specific lathe and turret configurations; this makes the bar appropriate for both single‑piece turning and serial production that calls for precise internal features. The 200 mm overall length provides reach into deeper bores without excessive overhang, helping to lower the risk of deflection. Technical advisors at Metav Werkzeuge can advise on clamping options and machining parameters to match machine rigidity and cutting data. Contact Metav Werkzeuge for tailored machining recommendations and to order the S20R DDUNL — call +49 2822 7131930 or email info@metav-werkzeuge.com for quick, professional advice and delivery from Emmerich. Technical data Article number: K487TM Manufacturer: Teknik Makina ISO designation: S20R DDUNL Core dimensions Diameter: 30 mm Shaft diameter: 20 mm Cutting height: 50 mm Overall length: 200 mm Weight: 0.508 kg Cutting angle: 93° Cutting direction: left Design and compatibility Compatible inserts: DN-- 1104 indexable inserts Insert seat geometry: DDUN Clamping holder designation: 11 Application: internal turning / boring FAQ Which inserts fit this boring bar? The bar accepts DN-- 1104 indexable inserts; the S20R DDUNL seat is matched to the DDUN insert geometry for secure mounting. What are the key dimensions to consider for setup? Key dimensions are Ø30 mm external diameter, Shaft Ø 20 mm, 50 mm cutting height and 200 mm overall length to assess reach and clamping requirements. Is this tool for left‑hand turning only? Yes, the tool is specified for left‑hand cutting and is intended for operations where the cutting direction corresponds to a left‑hand orientation. How heavy is the boring bar and how does that affect balance? The tool weighs 0.508 kg; its modest mass contributes to balanced turret mounting and reduced dynamic loads at typical spindle speeds. Who manufactures this product and what is the SKU? The manufacturer is Teknik Makina and the article is listed under SKU K487TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact design that combines a 20 mm shank for secure clamping and a 200 mm overall length for extended reach; compatibility with DN-- 1104 indexable inserts and a 93° cutting angle supports accurate internal turning. Order via Metav Werkzeuge or consult our technical advisors for application guidance. S20R DDUNR Boring Bar – 20 mm Shank, 93° Cutting Angle (Teknik Makina) The S20R DDUNR is a precision boring bar designed for internal turning with DN-- 1104 indexable inserts, optimised for right-hand cutting applications 20 mm shank for stable clamping Compatible with DN-- 1104 indexable inserts 93° cutting angle for internal precision 200 mm overall length for extended reach Stable clamping and reliable machining results The combination of a 20 mm shank and a balanced tool body gives high stability during internal turning operations. Reduced vibration from a correctly sized shank improves repeatability and contributes to consistent bore quality. With a mass of 0.508 kg, the tool maintains good balance in the turret, which supports smoother feeds and predictable tool life. The ISO-style designation simplifies replacement and stock management for production environments. Accurate bore finishing with standard inserts A 93° cutting angle and compatibility with DN-- 1104 indexable inserts make this tool suitable for tight internal geometries and finishing passes. The 50 mm cutting height ensures secure insert engagement and predictable chip control. Indexable inserts are replaceable carbide tips clamped to the cutter body, allowing quick restoration of cutting performance without regrinding; this reduces machine downtime and keeps process capability high for series production. Seamless integration into workshop tooling systems The 200 mm overall length provides the reach required for deeper bores while maintaining rigidity when combined with the correct holder. The nominal 30 mm body diameter and the ISO-style specification support straightforward matching with standard tool holders. Labelled with an S20R ISO designation, the bar integrates into existing tool inventories without special adapters, helping to streamline tool changes and procurement. For specification clarifications or application recommendations, Metav’s advisors are available to advise on the correct holder and insert grade for the task. For application recommendations and rapid supply of Teknik Makina turning tools, contact Metav Werkzeuge via +49 2822 7131930 or email info@metav-werkzeuge.com — our specialists will advise on the best configuration for workshop requirements. Technical Data Article number: K408TM ISO designation: S20R DDUNR Manufacturer: Teknik Makina Facts Shaft diameter: 20 mm Overall length: 200 mm Cutting height: 50 mm Body diameter: 30 mm Weight: 0.508 kg Cutting angle: 93° Cutting direction: right-hand Special features Compatible with DN-- 1104 indexable inserts Designed for internal turning / boring ISO-format boring bar designation Right-hand cutting orientation FAQ Which insert type fits this boring bar? The bar accepts DN-- 1104 indexable inserts; the S20R DDUNR geometry is designed specifically for that insert format. Is the cutting direction right-hand or left-hand? This boring bar is configured for right-hand cutting. What are the main dimensions of the tool? The tool features a 20 mm shank, 200 mm overall length and 50 mm cutting height, with a body diameter of 30 mm. Can this bar be used for finishing internal bores? Yes — the 93° cutting angle and secure insert clamping make it suitable for finishing and precise internal turning operations. How is the tool designated for ordering and stock? Order by SKU K408TM or ISO designation S20R DDUNR to ensure the correct boring bar is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High rigidity from the 25 mm shank and a 30 mm cutting diameter delivers stable milling and reduced vibration; compatibility with ADMT 1204 indexable inserts enables fast insert changes and economical tool life. Order directly through Metav Werkzeuge or consult our specialists for application support and supply. Schaftfräser S503TM — 30 mm indexable-insert shank cutter by Teknik Makina The Schaftfräser S503TM is a robust insert milling cutter designed for medium- to heavy-duty face and slot milling using ADMT 1204 indexable inserts. *Insert shank cutter for ADMT 1204 inserts *30 mm cutting diameter, 4 cutting edges *25 mm shank diameter, 60 mm cutting length *Torx M3x7 clamp screw, T8 key size Engineered for efficient, stable milling with high repeatability This insert milling tool is built around a 25 mm shank and a 30 mm cutting head to provide stiffness and improved run-out stability. The combination of a solid shank and a short overhang reduces chatter and extends insert life, which translates into fewer tool changes and higher uptime. The cutter's geometry—featuring 4 cutting edges—is optimised for continuous material removal, delivering consistent removal rates while maintaining surface finish. Operators unfamiliar with insert tooling will appreciate the straightforward explanation: the cutting edges are replaceable inserts, so the expensive tool body is retained while only the small indexable inserts require replacement when worn. Fast, secure insert changes and reliable clamping for production environments Changeovers are simplified by the tool's compatibility with ADMT 1204 indexable inserts and the defined clamping interface. The clamp uses a Torx M3x7 screw tightened with a T8 key size, ensuring predictable torque and secure seating of the insert during heavy cuts. This straightforward mechanical fixation reduces the risk of misalignment and supports predictable machining results across shifts. As a result, workshop planners gain a repeatable process step that lowers scrap risk and shortens set-up time; the cutter body performs as a durable carrier for multiple insert life cycles. Recommended applications and material guidance for sound process selection This shank cutter is intended for face and slot milling where indexable inserts are preferred for economy and turnaround. The tool’s robust design suits operations where productivity and tool-change efficiency are priorities. For compatibility: the cutter accepts ADMT 1204 inserts and is specified to work with inserts from established suppliers such as Walter. When selecting cutting parameters, favour conservative entry feeds for deep slotting and increase speed gradually while monitoring surface finish. Where a different cutting diameter or shank size is required, match the toolholder and clamping system to the 25 mm shank to preserve rigidity and accuracy. For procurement and technical support with Teknik Makina insert tooling, contact Metav Werkzeuge GmbH — supply and expert advice from Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for seamless integration into existing workflows Technical Data Article number: S503TM Manufacturer: Teknik Makina Product name: Schaftfräser Description: for ADMT 1204 Indexable Inserts SKU: S503TM eClass: 21180806 ETIM: EC011860 Facts Diameter: 30 mm Shank diameter: 25 mm Cutting length: 60 mm Overall length: 150 mm Number of cutting edges: 4 Weight: 0.558 kg Cutting angle: 90° Special features For ADMT 1204 indexable inserts Compatible with Walter inserts Torx clamp screw: M3x7 Torx key size: T8 Brand: Teknik Makina FAQ Which inserts fit this cutter? The cutter is designed for ADMT 1204 indexable inserts; use inserts specified for ADMT 1204 geometry to ensure correct seating and cutting performance. What shank diameter is required for the toolholder? The tool has a 25 mm shank diameter and should be mounted in a holder or collet rated for 25 mm to maintain rigidity and accuracy. How many edges does the cutter use and what does that mean for productivity? The cutter features 4 cutting edges, which balances chip evacuation and feed rate capability to deliver steady material removal and extended insert life. Is a special screw or key needed for the inserts? Insert clamping uses a Torx M3x7 screw; the appropriate key size is T8 for correct tightening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, indexable-insert solution that combines stable clamping, precise dimensions and straightforward maintenance for reliable machining cycles; order the shank milling cutter directly via Metav Werkzeuge or ask the consultants for application support. Shank cutter S381TM by Teknik Makina – for P32 indexable inserts, 30 mm cutting diameter The Shank cutter S381TM is a shank milling tool designed for use with P32 indexable inserts, suited to CNC milling applications that require quick insert changes and consistent tool performance. 30 mm cutting diameter for stable cuts 32 mm shank diameter for secure mounting Compatible with P32 indexable inserts (Walter) M8 torx screw and Allen key 4 mm for clamping Rigidity and secure clamping for consistent machining The S381TM is engineered with a 32 mm shank and a 30 mm cutting diameter, which together provide a rigid connection to the spindle and reduce vibration during cutting. The insert is fastened with an M8 torx screw, clamped using an Allen key 4 mm, allowing for repeatable seating that minimises runout. For production environments where cycle-to-cycle consistency matters, the resulting reduction in part variation supports predictable tolerances and less downstream rework. Long cutting reach with compact handling to boost productivity With a 66 mm cutting length and a 200 mm overall length, this indexable-insert tool offers an extended engagement for deeper operations while keeping handling manageable. The comparatively modest mass of 1.148 kg keeps tool inertia low for controlled acceleration and deceleration on modern CNC machines. Using replaceable P32 inserts reduces tool-change time and lowers tooling costs per part, improving the cost-efficiency of serial machining without sacrificing surface quality. Straightforward compatibility and practical workshop use The holder is supplied for use with P32 30 inserts and is noted as compatible with Walter insert variants, simplifying procurement and inventory management. The combination of standardised insert formats and common clamping hardware makes maintenance predictable: worn cutting edges can be replaced in minutes, which reduces machine downtime and streamlines shift changeovers. This approach supports reliable throughput for job shops or production lines that require fast tool serviceability. Contact Metav Werkzeuge today for application advice or to confirm insert compatibility and mounting requirements for this Teknik Makina shank cutter S381TM Technical data SKU: S381TM Manufacturer: Teknik Makina Type: Shank cutter for P32 indexable inserts ECLASS: 21180806 ETIM: EC011860 Core measurements Cutting diameter: 30 mm Shank diameter: 32 mm Cutting length: 66 mm Overall length: 200 mm Weight: 1.148 kg Compatibility & features For P32 indexable inserts (P32 30) Compatible insert manufacturer: Walter Torx screw: M8 Torx/Allen key: Allen key 4 mm FAQ What insert type fits this shank cutter? The shank cutter S381TM is designed for P32 indexable inserts (designation P32 30), and it is compatible with inserts from Walter as stated in the product data. Which clamping tool is required for insert changes? Insert clamping is achieved with an M8 torx screw; an Allen key 4 mm (as listed) is used for tightening and loosening during insert replacement on the S381TM. What are the main dimensional advantages of this tool? The combination of a 32 mm shank and a 30 mm cutting diameter, together with a 66 mm cutting length, offers a balance of rigidity and reach suitable for a wide range of milling tasks with the S381TM. Is the tool suitable for heavy-duty machining? The toolholder’s dimensions and secure M8 clamping provide robust seating for indexable inserts; the S381TM is intended for stable milling operations where insert-based tooling is appropriate. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, indexable shaft cutter configured for efficient metal-removal with reliable insert clamping and quick serviceability; order directly via Metav Werkzeuge or request tailored advice from our consultants. Shaft Cutter S522TM – 30 mm cutting diameter, 3‑edge indexable cutter by Teknik Cutting Tools Shaft Cutter S522TM is a solid, indexable milling solution designed for heavy-duty slotting and face-milling operations using R390‑1704 indexable inserts For R390-1704 indexable inserts 30 mm cutting diameter with 3 cutting edges 25 mm shank diameter, 150 mm overall length Torx M3.5 screw fastening, T15 key required High compatibility for standardised indexable milling Engineered for seamless integration with R390‑1704 indexable inserts, this shaft cutter provides a dependable platform for insert-based milling. The Sandvik-compatible interface ensures access to a broad range of grades and geometries, allowing process engineers to select the best insert for each material and cutting condition. By using standardised inserts, tool inventory is simplified and tool changes are more predictable, which supports continuous production planning and cost control. Built for stable cutting and consistent part quality With a 30 mm cutting diameter and 3 cutting edges, the tool balances material removal rate and surface finish. The 90° cutting angle delivers a square shoulder capability suited to face milling and slotting, while the 25 mm shank diameter improves axial and radial stiffness in the chuck or collet. These features combine to reduce chatter and dimensional deviation, enabling reliable tolerances in series production and improving throughput per machining hour. Fast insert clamping and straightforward maintenance Insert retention is secured by a Torx M3.5×8.5 screw that is accessed with a T15 key, providing a repeatable, torqueable fastening method. This design shortens planned maintenance windows: insert replacement and indexation are quick and require only simple tools, which reduces downtime and simplifies operator training. The cutter’s moderate weight (0.582 kg) and compact overall length (150 mm) make handling and storage practical in most toolrooms. Process advantages and operational efficiency The indexable configuration delivers an advantageous cost-per-cut relationship: inserts can be rotated or replaced without discarding the body, lowering tooling costs for high-volume runs. The combination of three cutting edges and standardised inserts supports flexible machining strategies—balanced for both roughing and semi-finishing—helping production teams hit cycle-time targets while controlling tool spend. Purchase confidence and supply reliability Metav’s position as a precision partner ensures that this shaft cutter is supported by reliable logistics and technical guidance. The product benefits from tested compatibility and distribution through an experienced supplier network, offering traceable sourcing and consistent availability for workshop planning. For bespoke cutting strategies or to confirm the correct insert grade for an application, Metav Werkzeuge’s consultants are available to advise. Secure a dependable supply of high-precision milling tools: contact Metav Werkzeuge to discuss the S522TM’s suitability for specific operations or to arrange procurement via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: S522TM Manufacturer: Teknik Makina Description: Shaft cutter for R390 1704 Indexable Inserts Facts Cutting diameter: 30 mm Shank diameter: 25 mm Cutting length: 55 mm Overall length: 150 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.582 kg Special features Compatible inserts: R390-1704 Compatible insert manufacturer: Sandvik Fastening screw: Torx M3.5×8.5 Required Torx key: T15 FAQ Which inserts fit this cutter? The cutter accepts R390‑1704 indexable inserts; compatibility with Sandvik inserts is indicated for a wide choice of grades and chipbreakers. How many cutting edges does the tool have? The tool features 3 cutting edges, which support balanced material removal and improved surface consistency. What are the key dimensions to check before ordering? Relevant dimensions are: 30 mm cutting diameter, 25 mm shank diameter and 150 mm overall length; these determine fixture compatibility and reach. Which fastening method secures the inserts? Inserts are secured with a Torx M3.5×8.5 screw accessed by a T15 key for repeatable clamping and simple service. Is this cutter suitable for both face milling and slotting? Yes; the 90° cutting angle and solid indexable design make it appropriate for square-shoulder face milling and moderate slotting tasks when used with the correct insert grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust milling body that combines precise compatibility with quick insert changes and strong clamping stability for reliable production runs. The design supports Sandvik R390-1704 indexable inserts and features a rigid 25 mm shank and Ø30 mm cutter diameter for consistent cutting performance; order directly via Metav Werkzeuge or consult their specialists for setup guidance. Schaftfräser S532TM – indexable insert milling body, Ø30 mm with 25 mm shank (Teknik Makina) The Schaftfräser S532TM is a milling body engineered for use with R390-1704 indexable inserts, intended for industrial facing and peripheral milling operations where fast insert changes and repeatable set-ups are required Compatible with R390-1704 Sandvik inserts Ø30 mm cutter body with 3 cutting edges 25 mm shank for rigid clamping 200 mm overall length, 55 mm cutting length High productivity through smart insert compatibility The main asset of this milling body is its compatibility with R390-1704 indexable inserts from Sandvik, which allows familiar insert selection and quick replacement without complex regrinding. With a standardised insert interface, tooling changeover times are reduced and process predictability is increased. The cutter body is supplied with a M3.5×8.5 Torx screw secured by a T15 key, ensuring a repeatable and secure insert clamp; this fastening method is industry-standard and simplifies maintenance procedures while enabling fast replacement under production conditions. Rigidity and dimensional control for consistent results Built with a 25 mm shank and a Ø30 mm body diameter, the design prioritises rigidity and vibration damping to improve surface finish and tool life. The tool provides a 55 mm cutting length within a 200 mm overall length, and the geometry includes a 90° cutting angle and 3 cutting edges, which are balanced to deliver even material removal and stable chip formation. These dimensional choices ensure that the milling body can be mounted securely in standard holders and will maintain run-out tolerances expected in serial manufacturing. Practical advantages in workshop and production environments The modular nature of an indexable milling body reduces total tooling cost by separating the durable body from the consumable inserts. The milling body is suitable for tasks where indexed inserts are preferred for economical roughing and finishing cycles and where minimal setup time is critical. Maintenance is straightforward thanks to standardised fixing screws and a familiar insert family; traceability is simplified by the clear SKU marking. For procurement and inventory planning, the combination of a reusable body and widely available inserts supports lean tooling strategies and predictable operating expenses. For procurement or technical advice on the Teknik Makina S532TM milling body and its use with Sandvik R390-1704 inserts, please contact Metav Werkzeuge for personalised consultation and reliable delivery from Emmerich Technical data Article number: S532TM Manufacturer: Teknik Makina Compatible inserts: R390-1704 (Sandvik) Torx screw: M3.5×8.5, Torx key: T15 Key dimensions Diameter: 30 mm Shank diameter: 25 mm Cutting length: 55 mm Total length: 200 mm Number of cutting edges: 3 Weight: 0.773 kg Design & features 90° cutting angle Indexable insert milling body Supplied for Sandvik R390-1704 inserts Secure insert clamping with M3.5×8.5 Torx screw FAQ Which inserts fit this milling body? The milling body is designed for R390-1704 indexable inserts; compatibility with Sandvik inserts is specified for straightforward procurement and replacement. What are the critical dimensions for holder selection? Key dimensions include a 25 mm shank diameter, Ø30 mm body, 55 mm cutting length, and 200 mm overall length, which should be matched to the machine holder and setup. How are the inserts fixed to the body? Inserts are secured with a M3.5×8.5 Torx screw tightened using a T15 key, providing a stable and repeatable clamp for production use. Is this milling body suitable for finishing as well as roughing? The combination of a rigid 25 mm shank, three cutting edges and a 90° geometry supports both roughing and medium finishing operations when used with appropriate inserts. What is the article number for ordering and reference? The article number (SKU) for ordering and stock management is S532TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise compatibility with proven indexable inserts, a 30 mm cutting diameter and a rigid 25 mm shank to achieve stable, repeatable milling results; the design reduces tool change time and supports consistent surface quality. Order the S512TM directly via Metav Werkzeuge or consult our specialists for integration advice. S512TM Insert Milling Cutter — 30 mm diameter, for R390‑1704 indexable inserts (Teknik Makina) The S512TM is an indexable insert milling cutter designed for medium‑duty facing and slotting operations, compatible with the R390‑1704 insert system and intended for use where fast insert indexing and reliable clamping are required 30 mm cutting diameter 25 mm shank for rigid clamping Compatible with R390‑1704 Sandvik inserts Three cutting edges for balanced cutting Stable insert system for predictable performance The tool is built around the R390‑1704 insert interface, a widely used standard that simplifies stocking and index changes; the use of indexable inserts ensures constant cutting geometry without full regrinding. Fast securement is achieved with an M3.5x8.5 Torx screw and a T15 key interface, which keeps setup times low and repeatability high. These characteristics translate into fewer interruptions on the shop floor and predictable cycle times, supporting tighter production planning. Rigidity and geometry tuned for consistent metal removal A 25 mm shank paired with a 30 mm cutter body gives improved clamping stability and reduced chatter in many fixture arrangements. The cutter features three cutting edges and a 90° cutting angle, with a 45 mm effective cutting length and 120 mm overall length; the balanced geometry promotes even load distribution across inserts and a uniform surface finish. The assembly weight of approximately 0.461 kg contributes to controlled spindle load while maintaining sufficient mass for damping, making the tool suitable for stable milling operations where dimensional consistency matters. Easy handling, controlled life‑cycle and workshop integration Changeover is simplified by standardised insert geometry and the Torx fastening solution, lowering maintenance time and inventory complexity. The modular concept of indexable tooling encourages economical replenishment: only the worn inserts are replaced rather than the entire cutter body. Combined with Metav’s logistical reliability and broad product range, the cutter supports efficient workshop management and reduces supplier fragmentation, enabling longer production runs with consistent quality and less administrative overhead. Speak with Metav Werkzeuge for detailed drawings, delivery options and technical matching of the Teknik Cutting Tools S512TM insert milling cutter to current production setups Technical data Article number: S512TM Brand: Teknik Makina Product name: Insert milling cutter for R390‑1704 indexable inserts ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 30 mm Shank diameter: 25 mm Cutting length: 45 mm Overall length: 120 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.461 kg Special features Compatible with R390‑1704 indexable inserts (Sandvik) Torx screw: M3.5x8.5 Torx key: T15 SKU: S512TM FAQ Which inserts fit this cutter? The cutter accepts R390‑1704 indexable inserts; replacement inserts from the R390‑1704 family match the pocket geometry and clamping method used on the S512TM. How are the inserts secured? Inserts are fastened with an M3.5x8.5 Torx screw; a T15 key is specified for secure tightening on the S512TM. What clamping diameter is required? A 25 mm shank is specified for the S512TM, so holders or collets that accept a 25 mm shank are required for proper mounting. How many cutting edges are available on the tool body? The S512TM is equipped with three cutting edges, providing a balance between material removal rate and surface finish. Is the cutter suitable for rapid insert indexing? Yes, the standard R390‑1704 interface and Torx fastening enable quick insert changes and straightforward indexing on the S512TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of secure clamping and insert versatility: the cutter’s 25 mm shank and 30 mm diameter deliver improved rigidity and stable chip evacuation, while compatibility with RDMT 1003 inserts reduces downtime for edge changes. Order directly via Metav Werkzeuge or consult the specialists for application advice. R203TM insert milling cutter — 30 mm diameter, for RDMT 1003 indexable inserts (Teknik Makina) The R203TM insert milling cutter is a shank-mounted, indexable milling tool engineered for reliable face and shoulder operations where fast insert changes and stable clamping are priorities. 30 mm cutter diameter 25 mm shank diameter for secure clamping Compatible with RDMT 1003 inserts Greater rigidity and consistent surface quality The tool’s 25 mm shank and compact overall length of 150 mm reduce overhang and increase stiffness at the spindle, which directly improves cutting stability and repeatable surface finish. With a 30 mm diameter and a cutting length of 40 mm, the design balances material removal rate and control; this makes the cutter suitable for medium‑duty milling where dimensional consistency matters. The mass of 0.586 kg helps dampen vibration without compromising agility during tool changes. Economical insert system and straightforward maintenance Designed for RDMT 1003 indexable inserts, the cutter allows rapid insert rotation or replacement, limiting non‑productive time. Indexable tooling reduces edge change costs compared with solid‑carbide solutions because worn edges can be indexed or replaced individually. The tool’s three cutting edges provide an even cutting load distribution, which reduces insert wear and extends service intervals. A clear maintenance routine combined with the insert system supports predictable production planning and lower lifecycle cost. Secure fastening and simple assembly Insert retention uses a Torx screw M3.5x8.5 with a locking screw M3.5, tightened with a T15 Torx key, ensuring reliable clamping of each insert under cutting forces. This standardised fastening arrangement simplifies workshop logistics and toolroom procedures, because common Torx tools are compatible with routine maintenance. The straightforward screw geometry also permits precise torque application and safe insert seating for repeatable performance. Practical dimensions for diverse toolholders The shank profile and dimensions make the cutter compatible with typical toolholders that accept a 25 mm shank, providing broad machine compatibility without special adaptors. The combination of 30 mm diameter, 40 mm cutting length and a balanced three‑edge geometry supports operations such as shoulder milling, light slotting and face milling where insert tooling offers quick serviceability. The compact geometry helps reduce cycle times by enabling higher permissible feed rates while keeping vibration in check. Why this solution supports shopfloor productivity By pairing durable mechanical design with the flexible RDMT insert system, the tool supports continuous production with fewer interruptions for tool changes. The straightforward fastening method and widely available Torx key reduce toolroom complexity, while the robust shank improves tool life and part quality in repetitive machining tasks. For workshops aiming to streamline tooling inventories, this cutter represents a pragmatic option that emphasises uptime and ease of use. For tailored recommendations on integrating the Teknik Cutting Tools R203TM insert milling cutter into specific machining setups, contact Metav Werkzeuge for expert consultation and fast supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: R203TM Manufacturer: Teknik Makina Compatible inserts: RDMT 1003 Indexable Inserts Facts Cutter diameter: 30 mm Shank diameter: 25 mm Cutting length: 40 mm Overall length: 150 mm Number of cutting edges: 3 Weight: 0.586 kg Torx screw: M3.5x8.5 Locking screw: M3.5 Torx key size: T15 Special features For RDMT 1003 indexable inserts Torx screw M3.5x8.5 fastening T15 Torx key required Shank-mounted milling cutter design FAQ Which inserts are compatible with this cutter? The R203TM insert milling cutter accepts RDMT 1003 indexable inserts; this compatibility allows quick insert changes and straightforward stocking of spare edges. What clamping diameter is required for the toolholder? A toolholder that accommodates a 25 mm shank is required to clamp the cutter securely and benefit from its designed rigidity. How many cutting edges does the cutter use and what is the benefit? The cutter features three cutting edges, providing balanced cutting forces and improved insert life through even wear distribution. Which fastening hardware and key are needed for insert changes? Insert retention uses a Torx screw M3.5x8.5 with a locking screw M3.5; a T15 Torx key is required for secure assembly and repeatable torque. Is this tool suitable for short overhang applications? Yes, the 150 mm overall length combined with a 25 mm shank reduces overhang and increases stiffness, making the cutter a good choice for operations that prioritise rigidity and repeatability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable solution that combines precise insert compatibility with secure clamping — the 30 mm cutting diameter and 25 mm shank ensure stable milling and uninterrupted cycles. Order the tool directly via Metav Werkzeuge or consult our specialists for integration advice. Shank milling cutter for RDMT 12T3 indexable inserts — 30 mm diameter, 25 mm shank (Teknik Makina) Shank milling cutter for RDMT 12T3 indexable inserts designed for robust, indexable milling operations in production and workshop environments For RDMT 12T3 indexable inserts 30 mm cutting diameter 25 mm shank for secure clamping M3.5 locking screw, Torx T15 key Consistent performance for stable production This indexable milling tool is built to deliver predictable cutting behaviour across repeated cycles. The 30 mm cutting diameter and two cutting edges provide a balance between material removal and surface finish, while the 25 mm shank reduces deflection through a secure connection to the tool holder. With a compact 200 mm overall length and a weight of 0.784 kg, the cutter offers a stable mass distribution that supports steady spindle dynamics and lower vibration. The result is improved component repeatability and fewer interruptions for rework, which benefits throughput and quality control. Fast insert changes and reliable clamping Engineered for efficient maintenance, the design accepts RDMT 12T3 indexable inserts and secures them with an M3.5 locking screw. The supplied Torx configuration (Torx screw M3.5x8.5, key T15) enables quick, repeatable insert replacement with minimal downtime. A consistently torqued fastener prevents micro-movement at the cutting edge, preserving insert life and maintaining cutting accuracy. For production environments where fast tool exchange matters, this configuration reduces non-productive time and simplifies inventory by standardising on a common insert type. Economic milling through indexable tooling Using an indexable insert system reduces per-part tooling costs compared with solid cutters because only the insert is replaced when worn. The holder’s compatibility with the widely used RDMT 12T3 family makes it straightforward to source replacement inserts, reducing lead times and stock pressure. The cutter’s geometry supports both roughing passes and light finishing cuts, providing a cost-effective compromise between lifetime performance and initial investment. For workshops and small production lines, this translates into lower operating expenses and more predictable maintenance cycles. Safe installation and practical handling Practical design elements assist safe use and long service life: the 25 mm shank ensures compatibility with standard collets and chucks, while the 55 mm cutting length on the shank gives sufficient reach for common setups. With an overall length of 200 mm, users should verify holder clearance and ensure correct clamping depth to maintain balance. The tool (SKU R245TM) is lightweight relative to its size, but correct tightening of the M3.5 locking screw with a T15 Torx key is essential to prevent insert loosening. Regular inspection of the screw and seat before operation supports consistent performance and safer machining. For Teknik Makina reliability and efficient indexable milling solutions, contact Metav Werkzeuge in Emmerich for tailored advice and fast supply — info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: R245TM Manufacturer: Teknik Makina For inserts: RDMT 12T3 Weight: 0.784 kg Facts Cutting diameter: 30 mm Shank diameter: 25 mm Overall length: 200 mm Cutting length (shank): 55 mm Cutting edges: 2 Special features M3.5 locking screw Torx screw M3.5x8.5 Torx key: T15 Indexable insert system FAQ Which inserts fit this cutter? The cutter is designed for RDMT 12T3 indexable inserts; use inserts specified for that ISO format to ensure correct seating and performance. What size holder is required for the shank? A holder or collet system accepting a 25 mm shank is required; ensure correct clamping depth and concentricity for best results. How is the insert secured and changed? Inserts are fastened with an M3.5 locking screw; the Torx screw specification is M3.5x8.5 and a T15 key is used for secure, repeatable tightening. Is the tool balanced for high-speed milling? The tool’s 200 mm overall length and 0.784 kg weight provide a stable balance for typical indexable milling operations; confirm machine speed and holder compatibility before high-speed use. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine robust cutting geometry with secure clamping and fast insert changes for steady production performance; the compatibility with RDMT 12T3 indexable inserts reduces downtime while the solid 30 mm diameter ensures consistent material removal. Order via Metav Werkzeuge or request specialist advice for application pairing. Shank milling cutter R255TM — 30 mm cutting diameter, for RDMT 12T3 indexable inserts (Teknik Makina) A Shank milling cutter R255TM designed for indexable insert milling where stability and quick insert replacement are required 30 mm cutting diameter for robust material removal Accepts RDMT 12T3 indexable inserts Two cutting edges for stable chip formation 25 mm shank diameter for secure clamping High-performance cutting with proven insert compatibility The R255TM is engineered around a 30 mm cutting diameter and a cutter body that accepts RDMT 12T3 indexable inserts, combining productivity with serviceability. The use of standard indexable inserts allows fast edge changes and repeatable cutting parameters, which reduces machine downtime and inventory complexity. With two cutting edges, the cutter provides a focused, stable cutting action that helps maintain process consistency on medium-duty milling operations. The design supports repeatable insert seating and predictable chip flow, which benefits cycle times and tool life. Secure clamping and dimensional control for stable passes A firm connection to the spindle is essential for accurate milling; the tool features a 25 mm shank and an extended body geometry to ensure rigid support in the toolholder. The 55 mm cutting length and 300 mm overall length balance reach and stiffness for many common setups, while the tool’s mass helps dampen vibration during engagement. These dimensional parameters translate directly into improved surface quality and reduced rework—advantages that feed into more predictable production planning and lower scrap rates. Practical handling and maintenance that save time The cutter uses a M3.5 locking screw and a M3.5x8.5 Torx screw secured with a T15 Torx key, enabling fast and reliable insert changes with commonly available tooling. Indexable inserts remove the need for regrinding and simplify maintenance routines: worn edges are replaced in seconds, not hours, restoring cutting geometry without specialised reconditioning. The straightforward screw and key combination reduces the risk of incorrect fastening and keeps the changeover process safe and efficient for shop-floor staff. Designed for industrial use and flexible workshop workflows Built for compatibility with established insert systems, this tool is appropriate where indexable insert solutions are preferred for their economy and repeatability. The R255TM’s configuration supports applications requiring quick edge replacement and stable cutting behaviour, such as series production and maintenance milling tasks. Its robust construction and standard fastening hardware make it straightforward to incorporate into existing toolsets, while the compatibility with widely used inserts helps keep spare-part inventories compact and cost-efficient. Contact Metav Werkzeuge for tailored application advice and supply of the Teknik Makina R255TM — our Emmerich team will assist with toolholder pairing and delivery options Technical Data Article number: R255TM Manufacturer: Teknik Makina Facts Cutting diameter: 30 mm Shank diameter: 25 mm Cutting length: 55 mm Overall length: 300 mm Number of cutting edges: 2 Weight: 1.168 kg Special features For RDMT 12T3 indexable inserts Locking screw M3.5 Torx screw M3.5x8.5 Torx key T15 Compatible with standard insert clamping systems FAQ Which insert type fits this cutter? The cutter is designed for RDMT 12T3 indexable inserts; the seating and clamping geometry match that insert family for secure and repeatable mounting. How many cutting edges does the tool provide and what is the benefit? The tool features two cutting edges, which deliver a stable cutting action and predictable chip formation, supporting consistent surface finish and tool life. What are the key dimensions to consider for toolholder selection? Key dimensions include a 30 mm cutting diameter and a 25 mm shank diameter; toolholders and collets should be chosen to accommodate the 25 mm shank for secure clamping. Which fastening hardware is required for insert changes? Insert clamping uses a M3.5 locking screw and a M3.5x8.5 Torx screw, tightened with a T15 Torx key, facilitating quick and secure insert replacement. Is the cutter suitable for quick production changeovers? Yes; the indexable insert system and simple screw fastening enable rapid edge replacement, making the tool well suited to workflows that require short changeover times and reliable repeatability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of high material removal capability, rigid clamping and coolant-fed tool stability to keep machining cycles consistent and reduce downtime; order the cutter directly via Metav Werkzeuge or consult the team for application matching. Shank milling cutter — 30 mm diameter, internal coolant, for AP-- 1604 indexable inserts (Teknik Makina) The Shank milling cutter is a coolant-fed indexable tool designed for medium to heavy milling operations using AP-- 1604 inserts, combining a compact 30 mm diameter with a rigid 25 mm shank for stable machining in demanding setups. 30 mm cutting diameter Internal coolant for secure chip evacuation Fits AP-- 1604 indexable inserts 25 mm shank for rigid clamping High-efficiency cutting for shorter cycle times This coolant-fed indexable design focuses on reproducible metal removal and machining economy. With a 30 mm diameter and three cutting edges, the tool increases material removal rate while reducing the number of passes required. The internal coolant channel directs cutting fluid precisely to the cutting zone, improving heat dissipation and reducing flank wear, which translates into longer insert life and fewer tool changes. These performance attributes support higher throughput on batch and serial production runs without compromising surface quality. Stable clamping and vibration-resistant operation A 25 mm shank and 120 mm overall length deliver a compact yet rigid setup that reduces tool deflection during interrupted cuts. The cutter’s 45 mm cutting length provides a measured balance between reach and stiffness, allowing secure clamping in conventional toolholders. Combined with the indexed insert system, this results in consistent axial and radial run-out characteristics, so setups remain predictable and rework is minimised. The robust mechanical interface keeps processes steady even under elevated cutting forces. Practical compatibility and simple maintenance Compatibility with AP-- 1604 inserts from Korloy ensures broad availability of grades and geometries for steels, aluminium alloys and general workshop materials. The technical connection uses M4x10 Torx screws (T15), which simplifies insert changes and minimises downtime using common workshop tools. The design supports rapid replenishment cycles: worn inserts are swapped quickly and indexing restores cutting performance without regrinding, helping to keep maintenance routines efficient and cost-effective. Contact Metav Werkzeuge for technical matching and ordering of the Teknik Makina coolant-fed indexable shank milling cutter (SKU S258-1TM); call +49 2822 7131930 or email info@metav-werkzeuge.com for application advice and supply options Technical data Article number: S258-1TM Product: Shank milling cutter (Schaftfräser) Manufacturer: Teknik Makina Core specifications Diameter: 30 mm Overall length: 120 mm Shank diameter: 25 mm Cutting length: 45 mm Number of cutting edges: 3 Weight: 0.46 kg Special features Internal coolant Fits AP-- 1604 indexable inserts Compatible with Korloy inserts Torx key: T15 Torx screw: M4x10 FAQ What insert type does the cutter use? The tool is designed for AP-- 1604 indexable inserts; grades and geometries from Korloy are compatible for a wide range of materials. How does the internal coolant improve performance? Internal coolant directs fluid to the cutting zone, reducing heat and improving chip evacuation; this preserves insert life and enhances surface quality for the Teknik Makina shank milling cutter (SKU S258-1TM). Which shank diameter is required for clamping? A 25 mm shank ensures a rigid clamp interface, suitable for standard toolholders that accept this diameter and provide stable machining. What cutting length and reach does the tool provide? The tool offers a 45 mm cutting length within a 120 mm overall length, balancing reach and stiffness for typical milling operations. How many cutting edges are fitted and what is the benefit? Three cutting edges increase material removal per revolution while keeping chip loads manageable, which supports efficient machining cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of stable cutting performance and rapid indexable-insert changes thanks to a compact Ø30 mm cutting diameter and compatibility with RDMT 1003 inserts; combine high rigidity with straightforward maintenance to keep production moving. Order the shank milling cutter directly via Metav Werkzeuge or ask our consultants for tailored advice. Shank milling cutter R193TM — indexable-insert cutter, Ø30 mm, 3‑edge (Teknik Makina) The Shank milling cutter R193TM is a purpose-built indexable-insert tool for versatile metalworking, engineered for stable machining with compact machines and standard 25 mm shank holders Ø30 mm cutting diameter 3 cutting edges for robust material removal Shank Ø25 mm; 40 mm cutting length Compatible with RDMT 1003 indexable inserts Outstanding stability for consistent surface quality The combination of a Ø30 mm cutting diameter and 3 cutting edges delivers predictable chip load and reduced chatter during interrupted cuts. Thanks to a shank Ø25 mm and the cutter’s balanced design, the tool offers improved run-out characteristics that make repeatable, high-quality faces and slots achievable on smaller machining centres. This stability directly reduces rework and supports consistent cycle times across batch runs, helping to protect process reliability. Fast insert changes minimise downtime Designed for indexable inserts RDMT 1003, the holder accepts standard inserts for quick replacement. The insert is secured with an M3.5 locking screw and an auxiliary M3.5x8.5 Torx screw; a T15 Torx key is required for service. These features enable rapid changeovers with limited tooling effort, shortening overall maintenance time and keeping machine availability high. The modular insert system means only the cutting edges need replacing, not the whole tool body, improving cost-efficiency per cut. Compact dimensions that integrate with existing workflows With a 40 mm cutting length and 120 mm overall length, the cutter fits neatly in compact tool magazines and short-reach setups while still providing sufficient machining engagement for common operations. The tool’s modest mass (0.468 kg) aids spindle balance and reduces dynamic loads at higher spindle speeds, helping to maintain tool life and surface finish. This compact form factor supports easy integration into existing toolchains and simplifies clamping in standard 25 mm toolholders. For detailed specification matching, procurement or application advice on Teknik Makina milling cutters, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to arrange supply or technical consultation. Technical Data Article number: R193TM Manufacturer: Teknik Makina Name: Shank milling cutter for RDMT 1003 indexable inserts SKU: R193TM Facts Diameter: 30 mm Number of cutting edges: 3 Shank diameter: 25 mm Cutting length (shank): 40 mm Overall length: 120 mm Weight: 0.468 kg Special features Compatible with RDMT 1003 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key size: T15 FAQ Which indexable inserts fit this cutter? The cutter is compatible with RDMT 1003 indexable inserts; the clamping system is designed to secure those inserts reliably for repeatable machining. What toolholder fits the shank? A standard toolholder for a 25 mm shank is suitable; the shank diameter of 25 mm ensures secure clamping and good rigidity for the intended applications. How are the inserts secured and changed? Inserts are fastened with an M3.5 locking screw and a secondary M3.5x8.5 Torx screw; use a T15 Torx key for removal and installation, enabling fast, tool-based changeovers. Is the cutter suitable for compact machining centres? Yes, the 120 mm overall length and 40 mm cutting length make the tool well suited to compact machines and short-reach setups while maintaining sufficient engagement for productive milling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining rigidity, precise insert compatibility and a compact profile, this boring bar supports stable internal turning and reduces tool-change downtime; order directly via Metav Werkzeuge or consult our specialists for application matching. Bohrstange (SIL S25R) – Boring bar for 16–22ER indexable inserts, 25 mm shank (Teknik Makina) The Bohrstange is a left-hand boring bar designed for use with 16–22ER indexable inserts, intended for internal turning and medium-duty CNC operations requiring reliable clamping and straightforward integration. *Left-hand cutting direction *25 mm shank diameter *Compatible with 22 ER indexable inserts *200 mm overall length Greater process stability through insert compatibility This boring tool is engineered to accept standard 16–22ER indexable inserts, enabling fast regrinding cycles and keeping machine uptime high. The ER22 clamping compatibility ensures a secure fit in common toolholders and collets, which reduces micro-movement at the cutting edge. By matching a standard insert form to a robust holder geometry, the tool lowers vibration and produces more consistent surface finishes — a clear efficiency gain for production environments where repeatability and short setup times matter. The left-hand orientation permits machining strategies that require inverted cutting directions without modifying the machine or programme. Rigidity and reach for repeatable internal turning A solid 25 mm shank paired with a 200 mm overall length gives a balance between reach and stiffness, while the 30 mm body diameter contributes to radial stability during internal cuts. The specified cutting height of 45 mm accommodates typical insert seating and clearance demands, and the measured weight of 0.764 kg supports predictable tool dynamics. Together, these dimensional attributes translate into reduced chatter and better tool life, which benefits cycle-time predictability and lowers scrap rates in workshop and small-series production. Easy integration into existing setups and secure identification Labeled with the ISO designation SIL S25R, this holder simplifies inventory management and ordering. The modular nature of the design means the bar readily integrates into ER22 clamping systems and is intended specifically for 22 ER insert formats, streamlining procurement and stocking decisions. For engineers and buyers this reduces the need for bespoke holders, enabling faster tool changes and consistent cutting results across different machines. The combination of standard dimensions and a clear ISO code supports traceability and rapid replacement when tool wear requires intervention. For fast availability from our Emmerich stock and technical matching of Teknik Makina SIL S25R boring bars, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and supply options. Technical data SKU: K334TM Brand: Teknik Makina ISO designation: SIL S25R Product description: SIL for 16–22ER indexable inserts Cutting direction: left Suitable insert size: 22 ER Clamping holder: ER22 ECLASS: 21180806 Dimensions Shank diameter: 25 mm Body diameter: 30 mm Overall length: 200 mm Cutting height: 45 mm Weight: 0.764 kg Applications & features For 16–22ER indexable inserts Left-hand cutting orientation ER22 compatibility for secure clamping ISO: SIL S25R FAQ Which insert sizes are compatible with this boring bar? The boring bar is designed for 16–22ER indexable inserts, specified for 22 ER seating; the SIL S25R designation confirms compatibility. What clamping system is required to mount the tool? Mounting is achieved via an ER22 clamping interface; the shank and holder geometry are matched to ER22 toolholders. Is the cutting direction left- or right-handed? This model is specified for left-hand cutting direction, suitable when the machining programme or toolpath requires inverted orientation. What are the key dimensions to check for machine setup? Key values are a 25 mm shank, 30 mm body diameter, 200 mm overall length and a 45 mm cutting height, which inform reach and clearance planning. How is the product identified for reordering or stock? Identification is by ISO designation SIL S25R and SKU K334TM, both of which simplify replacement and inventory control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact combination of rigidity and insert compatibility for precise internal turning: the SIR S25R offers a 25 mm shank with a 45 mm cutting height and secure M4x15 clamping. Order the boring bar directly via Metav Werkzeuge or consult our advisors for integration into existing toolholding systems. SIR S25R Boring Bar (SIR for IR Indexable Inserts) — 25 mm shank, 45 mm cutting height | Teknik Makina The SIR S25R is a right-hand boring bar designed for use with IR22 indexable inserts, intended for precision internal turning and boring operations in CNC and turning centres. Right-hand cutting direction 25 mm shank diameter for stable clamping Compatible with 22 IR indexable inserts 45 mm cutting height for extended engagement Stable performance for internal turning operations The tool body is engineered to deliver high rigidity during internal machining, which reduces chatter and improves surface finish on bores. The combination of a 25 mm shank and a 200 mm overall length produces a controlled balance between reach and stiffness, making the bar suitable for medium-depth boring where repeatable accuracy is required. Reduced vibration is achieved through a compact profile, and the low mass of 0.76 kg contributes to easier tool changes without compromising stability. Secure clamping and simple insert handling A robust clamping interface is provided for IR22 inserts, using an M4x15 Torx screw (Torx key T15) to ensure consistent seat pressure. Indexable inserts are fixed mechanically so that the cutting edge position is repeatable after each index, which means less downtime for edge changes and a predictable dimensional outcome. The concept of an indexable insert—an independently replaceable cutting tip—allows costs to be concentrated on consumable tips rather than the entire tool, improving cost-efficiency in serial production. Optimised for right-hand cutting in CNC workflows Designed for right-hand cutting, this bar integrates smoothly into standard turning and boring programmes. The nominal diameter of 30 mm and the 45 mm cutting height permit stable chip evacuation when paired with appropriate inserts and cutting parameters. Because programming and tool offsets are simplified by standardised geometries, setup times at the machine are reduced and throughput can be increased while maintaining the required tolerances. Practical compatibility with holders and accessories The shank and seat geometry are matched to common clamping systems: compatible clamp holder designation IR22, support U-plate TA063 and shim BSP010 are indicated for assembly. These parts work together to maintain positional accuracy and to facilitate quick replacement cycles. Where toolholders are standardised on the shopfloor, this modular approach allows the boring bar to be swapped in without extensive rework of fixtures. Reliability, sourcing and supply for production continuity Supplied by Teknik Makina and distributed via Metav Werkzeuge, the tool benefits from a secure logistical chain that aims to keep workshop downtime to a minimum. The compact design and familiar fastenings (Torx T15, M4x15) mean routine maintenance and consumable replenishment are straightforward, supporting ongoing production demands and predictable tool costs. Contact Metav Werkzeuge for specification matching and procurement from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration and lead times Technical data SKU: K343TM ISO designation: SIR S25R Article description: SIR for IR Indexable Inserts Brand: Teknik Makina Facts Shank diameter: 25 mm Cutting height: 45 mm Overall length: 200 mm Diameter: 30 mm Weight: 0.76 kg Cutting direction: right ECLASS: 21180806 Special features For indexable inserts: 22 IR Clamping screw: M4x15 (Torx key T15) Compatible clamp holder: IR22 U-plate: TA063 Shim: BSP010 FAQ What type of inserts does this boring bar accept? The SIR S25R is designed for IR22 indexable inserts; insert geometry must match the IR22 seat for correct clamping and alignment. Is the cutting direction right-hand or left-hand? The bar is specified for right-hand cutting, suitable for standard right-hand boring and turning cycles. What are the key dimensions for setup and programming? Use a shank diameter of 25 mm, an overall length of 200 mm and a cutting height of 45 mm when entering tool offsets and reach calculations for the machine. Which clamping components are recommended for assembly? Recommended parts include clamp holder IR22, U-plate TA063 and shim BSP010, secured with the supplied M4x15 Torx screw (Torx T15) for reliable seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Inconsistent product data: the item is listed as "Vollbohrer" (solid drill) but also specifies compatibility with indexable inserts (SPMG 0904); please verify the product information to ensure accuracy and avoid potential confusion, as this discrepancy could lead to misunderstandings regarding the intended use or functionality of the product, particularly for customers who rely on precise specifications when making purchasing decisions, and it is crucial to confirm whether the tool is indeed a solid drill or if it is designed to accommodate indexable inserts, as this distinction impacts its application in various machining processes and could affect performance, usability, and overall customer satisfaction.

Take advantage of the combination of quick insert changes, a compact Ø30 mm cutting diameter and a rigid shank Ø25 mm for precise, repeatable milling operations; order the tool directly via Metav Werkzeuge or consult the specialists for configuration advice. Teknik Makina indexable milling cutter R229TM — Ø30 mm, for RDMT 12T3 inserts The R229TM is an indexable milling cutter designed for machining operations with RDMT 12T3 indexable inserts, suited to CNC and workshop milling where compact diameter and fast insert replacement matter. Indexable design for RDMT 12T3 inserts Ø30 mm cutting diameter Shank Ø25 mm for rigid clamping Quick insert change with Torx T15 Precision milling with compact diameter for consistent results The indexable milling cutter concept provides a cost-effective route to maintain cutting performance: with a Ø30 mm cutting diameter and a cutting length 40 mm, the tool offers a predictable cut zone that supports consistent surface finish and dimensional control. The two-edge geometry reduces radial load variation, which helps to stabilise the cut and minimise vibration during pocketing and shoulder milling. For production environments where part-to-part repeatability counts, this setup lowers scrap rates and reduces rework. Secure clamping and rapid insert replacement to reduce downtime A shank Ø25 mm provides a rigid interface for standard toolholders, ensuring runout remains low under normal machining forces. Insert retention is handled via an M3.5 locking screw and a Torx T15 drive, with the supplied M3.5x8.5 Torx screw dimension allowing straightforward, tool-assisted replacement of the RDMT inserts. The result is faster scheduled service and shorter tool-change cycles, translating directly into higher machine utilisation and improved throughput. Compatibility and easy integration with existing tooling systems Designed specifically for RDMT 12T3 indexable inserts, the cutter integrates with established insert ranges to make re-supply and inventory management simpler. The overall length of 120 mm balances accessibility in tight fixtures with sufficient reach for depth-critical operations, while the tool’s weight of 0.456 kg keeps dynamic loads predictable for most milling spindles. Where a compact, indexable solution is required to combine economy and performance, this cutter is a practical addition to mixed-production toolsets. Contact Metav Werkzeuge for tailored advice on Teknik Makina indexable milling cutters such as the R229TM — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss exact configurations and availability Technical data Article number: R229TM Manufacturer: Teknik Makina Product: Indexable milling cutter for RDMT 12T3 indexable inserts Facts Cutting diameter: 30 mm Shank diameter: 25 mm Cutting length: 40 mm Overall length: 120 mm Number of cutting edges: 2 Weight: 0.456 kg Torx screw: M3.5x8.5 Torx key: T15 Locking screw: M3.5 Special features For RDMT 12T3 indexable inserts Designed for quick insert changes Balanced two-edge configuration SKU: R229TM FAQ What insert type does this cutter accept? The R229TM indexable milling cutter accepts RDMT 12T3 indexable inserts; the cutter is configured specifically for that insert family to ensure correct seating and chip control. What are the shank and cutting diameters? The tool has a shank diameter of 25 mm and a cutting diameter of 30 mm, providing a rigid clamping interface and a compact cutting envelope. How are the inserts secured and changed? Inserts are secured with an M3.5 locking screw using a Torx T15 key; the provided screw dimensions (M3.5x8.5) support quick, repeatable insert replacement. Is the overall length suitable for tight fixtures? With an overall length of 120 mm, the cutter offers a balance between reach and rigidity for most fixture layouts while keeping tool overhang moderate. Can this cutter support high-volume production? The balanced two-edge configuration and indexable insert system of the R229TM are designed to reduce downtime and support production runs where predictable tool changes and consistent performance are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com