Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a compact, indexable solution that combines consistent thread quality, flexible insert compatibility and easy maintenance for uninterrupted production. Benefit from a Ø29 mm cutting diameter with a 25 mm shank and 110 mm overall length for secure clamping and good access in confined setups — order via Metav Werkzeuge or consult the specialists for application advice. Thread milling cutter DC208TM — indexable for S12–S40 inserts; Ø29 mm, 25 mm shank — Teknik Makina The Thread milling cutter DC208TM is a robust indexable cutter engineered for thread milling applications with S12, S14, S21, S30 and S40 insert sizes, intended for use in CNC milling machines and machining centres where repeatable thread geometry and quick insert changes are required. Indexable inserts S12–S40 compatible 29 mm cutting diameter 25 mm shank diameter Torx M5x12 screw, T20 key Precise thread generation with flexible insert options The cutter delivers repeatable thread form by using standard indexable inserts, which simplifies inventory management and lowers per-thread costs compared with solid tools. With a Ø29 mm diameter and modular insert compatibility, the tool enables consistent vee or form profiles depending on the chosen insert geometry. This approach supports predictable cycle times and reduces scrap rates through stable, measurable cutting conditions. Stability and secure retention for improved surface finish A 25 mm shank provides axial and radial rigidity in the toolholder, helping to suppress chatter during thread milling cycles. The insert clamping relies on a Torx M5x12 screw paired with a T20 key, ensuring secure torque and minimal micro-movement at the cutting edge. The result is improved surface integrity and longer insert life under comparable cutting parameters, which contributes to lower tooling costs and fewer interruptions in production. Fast setup and reduced downtime through simple servicing Interchangeable insert compatibility across multiple sizes allows quick reconfiguration for different thread classes without changing the entire tool body. The 110 mm overall length balances reach and stiffness for accessible fixturing while keeping the tool compact enough for standard machining centres. Faster insert changes and straightforward clamping translate into shorter machine downtime and an easier tool management routine in busy workshops. Designed for production and workshop environments Manufactured by Teknik Makina, the cutter suits production lines and trade shops that prioritise throughput and reliability. The combination of standardised insert formats and a robust holder design supports a wide range of thread-milling tasks where consistent results and straightforward logistics are paramount. The tool integrates into existing toolsets with minimal requalification effort, making it a pragmatic choice for both batch production and precision workshops. For application-specific guidance or to secure supply of the Teknik Makina DC208TM, contact Metav Werkzeuge for expert advice and reliable delivery from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: DC208TM Manufacturer: Teknik Makina Designation: Thread milling cutter (for S12, S14, S21, S30 and S40 indexable inserts) eCl@ss: 21180805 ETIM: EC011860 Numbers / Core technical data Cutting diameter: 29 mm Overall length: 110 mm Shank diameter (Ø): 25 mm Torx screw: M5x12 Torx key size: T20 Special features / Versions Compatible with S12, S14, S21, S30 and S40 indexable inserts Indexable thread milling application UID: DC208TM FAQ What insert sizes are compatible with this cutter? The cutter accepts indexable inserts in sizes S12, S14, S21, S30 and S40, allowing the DC208TM to be adapted to different thread profiles and production requirements. How is insert clamping secured on the tool? Insert retention uses a Torx M5x12 screw operated with a T20 key; this system provides firm clamping to reduce micro-movement and maintain thread accuracy during cutting. What are the primary dimensions to consider for setup? Key dimensions are the Ø29 mm cutting diameter, 25 mm shank diameter and 110 mm overall length, which influence rigidity, reach and holder compatibility for the DC208TM. Is this tool suitable for automated changeover systems? The tool body and standardised insert formats are compatible with automated tool stations and quick-change holders commonly used in CNC environments, supporting efficient tool changes. Which environments is this cutter intended for? Designed for production and workshop applications, the cutter is intended where reliable, repeatable thread generation and low maintenance effort are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of solid carbide construction and integrated internal coolant, together with a rigid 25 mm shank for consistent internal-thread production. Order the thread boring bar directly via Metav Werkzeuge or ask our consultants for application support. Thread boring bar KE76TM — Teknik Makina, internal coolant, solid carbide A Thread boring bar KE76TM designed for precision internal-thread machining, combining a solid-carbide body with through-tool coolant and compatibility with standard 16 IR indexable inserts. Solid carbide construction Internal coolant supply Compatible with 16 IR indexable inserts 25 mm shank, 250 mm overall length Consistent thread quality through a rigid, carbide design The KE76TM is engineered for repeatable internal-thread production by virtue of its solid carbide construction and a compact, rigid geometry. The monolithic body reduces vibration and deflection during cutting, which preserves thread geometry and pitch accuracy over long runs. Compatibility with 16 IR indexable inserts means the cutting edge can be renewed quickly without regrinding, delivering a consistent finish and minimising setup variation. This combination of material and insert system supports higher process stability and reduces scrap rates on precision components. Faster cycle times and extended tool life with through-tool cooling Integrated internal coolant directly to the cutting zone improves chip evacuation and thermal control, which reduces insert wear and lowers the risk of heat-related distortion in the workpiece. The KE76TM’s 25 mm shank provides a stable interface with the holder and contributes to axial and radial rigidity, allowing for more aggressive feeds where the application permits. The 250 mm overall length offers sufficient reach for many internal-threading tasks while maintaining stiffness; the net effect is shorter cycle times and fewer insert changes per production shift. Practical compatibility and straightforward maintenance for workshop use Designed with standard interfaces and assembly parts, the boring bar uses an E25S ISO shank designation and is supplied with companion items such as the TA060 u-plate, BSP010 pass washer and an IR16 clamping holder specification for secure insert mounting. Fastening hardware is specified as Torx T15 with matching M3.5x11 screws, enabling rapid, toolroom-standard insert changes. The nominal cutting-head height 16.2 mm and a manageable weight of 0.9 kg make handling and tool balancing straightforward during tool changes, while the right-hand cutting orientation suits conventional threading cycles on most CNC lathes and turning centres. Contact Metav Werkzeuge for tailored application advice or a quotation on the Teknik Makina Thread boring bar KE76TM with internal coolant and solid carbide construction; Metav Werkzeuge’s consultants can confirm machine compatibility and recommended inserts Technical data SKU: KE76TM EClass: 21180806 ISO designation: E25S Manufacturer: Teknik Makina Dimensions & core data Diameter: 29 mm Shank diameter: 25 mm Overall length: 250 mm Weight: 0.9 kg Cutting height: 16.2 mm Materials & special features Material: solid carbide Internal coolant: yes Compatible inserts: 16 IR Clamping holder: IR16 Cutting direction: right U-plate: TA060 Torx key: T15 Torx screw: M3.5x11 Pass washer: BSP010 FAQ Which inserts fit the boring bar? The KE76TM accepts 16 IR indexable inserts; the clamping system and IR16 holder ensure correct seat and repeatable positioning. Does the tool supply coolant through the bar? Yes, the KE76TM is equipped with internal coolant delivery to the cutting zone to improve chip control and extend insert life. What machines is this boring bar intended for? The boring bar is intended for internal-threading operations on CNC lathes and turning centres that can accept an E25S shank interface. How are inserts fastened to the tool? Inserts are secured using Torx T15 screws (M3.5x11) and the IR16 clamping holder; the KE76TM’s standardised hardware simplifies maintenance. What material is the tool made from? The KE76TM is manufactured from solid carbide, providing high rigidity and wear resistance for threading applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of compatibility with DCMT 0702 indexable inserts and the modular holder formats that shorten setup times and enhance machining consistency. Order the set directly via Metav Werkzeuge or request tailored application advice from our consultants. Boring bar set for DCMT 0702 indexable inserts, 3-holder configuration by Teknik Makina The Boring bar set is a purpose-built solution for turning and internal boring tasks, engineered to accept DCMT 0702 indexable inserts and to support versatile setups across workshop and industrial environments. Compatible with DCMT 0702 indexable inserts Three robust holder sizes for diverse bores Precision alignment for repeatable boring Made by Teknik Makina for industrial use Faster cycle times through targeted compatibility The set is optimised for compatibility with DCMT 0702 indexable inserts, which allows straightforward tool selection and reduced changeover effort. By matching holder geometry to a widely used insert format, the system supports consistent cutting conditions and contributes to precision of bore diameter and surface finish. This compatibility reduces time spent on trial-and-error set-up and helps maintain stable machining parameters across repeating production runs. Flexible holder range for fewer tool changes Equipped with three distinct holder formats — A08-10H SDUCR 07, A10-12K SDUCR 07 and A12-16M SDUCR 07 — the set covers a useful span of bore diameters without unnecessary inventory expansion. Each holder is designed for secure clamping and alignment, which supports a repeatable setup and lowers the risk of runout that can compromise finish or tolerances. For workshops requiring quick adaptation between internal turning tasks, the modular approach offers practical benefits in set-up speed and tooling efficiency. Industrial-grade sourcing and workshop suitability Produced under the Teknik Makina range, the assembly is intended for professional workshop and industrial environments where tool reliability and supply chain predictability matter. The SKU IPS09TM identifies this configuration for procurement and stock control. For businesses committed to streamlined purchasing, this set serves as a focused solution that complements established indexable insert inventories and reduces the need for ad-hoc custom tooling. For personalised technical guidance or to arrange supply of the Teknik Makina boring bar set, contact Metav Werkzeuge in Emmerich for application advice and delivery options. Technical data SKU: IPS09TM Article description: Boring bar set for DCMT 0702 indexable inserts Brand: Teknik Makina Contents: A08-10H SDUCR 07; A10-12K SDUCR 07; A12-16M SDUCR 07 Facts eClass: 21189217 Pieces per set: 3 Product type: Boring bar set Special features Compatibility: DCMT 0702 indexable inserts Shank/style: SDUCR 07 holder format Application: internal turning / boring Category: Machining FAQ Is this set compatible with DCMT 0702 inserts? Yes. The Boring bar set is designed specifically to accept DCMT 0702 indexable inserts and to provide a stable platform for internal turning operations. Which holder formats are included in the set? The set contains A08-10H SDUCR 07, A10-12K SDUCR 07 and A12-16M SDUCR 07, covering a practical range of bore sizes for workshop applications. Is this configuration suitable for production use? The Teknik Makina set is intended for industrial and professional workshop environments; its modular holders support repeatable set-ups that are appropriate for small-series and continuous production. How is the product identified for ordering and stock control? This configuration is listed under SKU IPS09TM, which should be cited for procurement and stock management. Can the holders be used with different insert grades for specific materials? Holders accept DCMT 0702 inserts; choice of insert grade determines suitability for particular material groups and cutting conditions, so select insert grades accordingly. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precise 3.5 mm drive and a compact, lightweight design for consistent assembly work; reliable traceability via SKU 35ALLENTM ensures quick inventory management — order directly from Metav Werkzeuge or consult the technical advisers for compatibility checks. Allen key 3.5 mm — compact hex key for workshop assembly by Teknik Makina The Allen key 3.5 mm is a small, practical hex tool intended for routine fastening tasks and maintenance in workshops and production environments 3.5 mm hex key size Compact for tight spaces Lightweight 0.1 kg for easy handling SKU 35ALLENTM for clear traceability Precise fit reduces screw damage and downtime A correctly sized 3.5 mm hex drive provides a snug engagement with hex socket fasteners, lowering the risk of cam‑out and rounded heads. The main advantage for industrial and workshop settings is consistency: repeated use of a matching tool reduces rework and keeps assembly times predictable. The compact dimensions support access to confined assemblies while retaining sufficient leverage for typical hand‑tightening operations. Where torque must be controlled by feel rather than measurement, a well‑fitting hex key contributes directly to process quality and fewer defective joints. Small footprint improves accessibility in confined assemblies The compact hex key form is especially useful where space is at a premium — inside housings, on machinery panels or in jigs. The light overall mass (approx. 0.1 kg) makes the tool easy to carry and integrate into mobile tool kits or fixed workstations. For production staff and maintenance teams, the reduced bulk minimises tool change time and simplifies organisation on workbenches. In addition, simple geometry means the tool is easy to clean and store, supporting orderly workshop practices and faster changeovers between tasks. Traceability and workshop logistics that support procurement Clear identification via SKU 35ALLENTM and the manufacturer reference Teknik Makina streamlines stock management and reordering procedures. Maintaining consistent tool types across a fleet of technicians reduces variability in assembly results and supports predictable spare‑parts handling. The straightforward specification — size, drive type and weight — permits rapid comparison with other hand tools when updating tool sets or specifying maintenance kits, helping purchasing and workshop managers make evidence‑based choices. Contact Metav Werkzeuge for a specification check and to integrate Teknik Makina’s 3.5 mm Allen key (SKU 35ALLENTM) into workshop stocks with assured traceability and supply reliability Technical Data Article number: 35ALLENTM Name: Allen key 3.5 mm Manufacturer: Teknik Makina Eclass: 21189290 Data Size: 3.5 mm Weight: 0.1 kg Special features Drive type: hex Traceability: SKU 35ALLENTM Intended use: workshop assembly and maintenance FAQ What size is this Allen key? The tool is a 3.5 mm Allen key (Teknik Makina, SKU 35ALLENTM), suitable for corresponding hex socket screws. Is the key suitable for confined spaces? Yes; the compact design and low weight of this hex key make it appropriate for access in tight assemblies and maintenance applications. How does SKU 35ALLENTM help with inventory control? SKU 35ALLENTM provides a clear reference for ordering and stock tracking, enabling consistent replacement and simplified procurement processes. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-precision knee lever that combines reliable clamping with a small footprint — Ø 3.5 mm and 12.2 mm total length ensure secure fixing in tight tool assemblies. Order the component directly via Metav Werkzeuge or consult the team for compatibility checks and rapid dispatch. Knee lever — compact clamping element by Teknik Cutting Tools, Ø 3.5 mm, 12.2 mm length Knee lever designed for secure clamping of indexable inserts and compact toolholder setups, offering a lightweight, durable option for repetitive production tasks Precision clamping for indexable inserts Compact Ø 3.5 mm profile Lightweight at 0.1 kg, durable design Consistent clamping for repeatable results This clamping element delivers precision where repeatability matters: the compact geometry and controlled dimensions translate into stable seat force for indexable tooling. The Ø 3.5 mm profile and 12.2 mm overall length reduce play in the holder, which helps maintain cutting edge position and minimises rework. As a result, machining cycles stay predictable and process audits are simpler, with an emphasis on measurable improvements in part quality rather than subjective claims. Space-saving design that improves accessibility A compact lever reduces interference in crowded tool zones and enables easier set-up in multi-station toolholders. The lightweight construction at 0.1 kg lowers inertia in rotating assemblies and makes manual handling during tool changes more efficient. Where access is limited, the reduced envelope supports faster insertion and removal of indexable inserts, helping to shorten machine downtime and streamline shift-based workflows without compromising clamp stability. Supply certainty and partner-level reassurance Sourced from Teknik Cutting Tools and distributed via Metav Werkzeuge, the component is supported by a logistics and quality filter located in Emmerich. Metav’s offering emphasises availability and precision: a broad stock range, transparent order processing and a history of consistent delivery that supports production planning. Choosing this component therefore combines a focused technical solution with the pragmatic benefits of a dependable supply chain and documented traceability. For a compact, reliable clamping solution from Teknik Cutting Tools, contact Metav Werkzeuge for product matching and fast supply from Emmerich — experts are available to advise on integration and compatibility Technical data Article number: TL3TM Manufacturer: Teknik Cutting Tools SKU: TL3TM Weight: 0.1 kg Diameter: 3.5 mm Total length: 12.2 mm Numbers / core technical data Ø: 3.5 mm Total length: 12.2 mm Weight: 0.1 kg SKU: TL3TM Special features / versions Suitable for indexable inserts Fast dispatch (description indicates quick shipment) Long service life indicated in description Compact knee lever geometry for tight assemblies FAQ What materials is the knee lever compatible with? The knee lever is specified for use with indexable inserts; suitability for specific workpiece materials depends on the insert and holder combination rather than the lever itself How does the Ø 3.5 mm diameter affect installation? The Ø 3.5 mm diameter determines the lever’s engagement fit and supports compact installations where space is limited, ensuring consistent seating in small toolholders Is this component supplied by Teknik Cutting Tools via Metav Werkzeuge? Yes — the part is supplied by Teknik Cutting Tools and distributed through Metav Werkzeuge (SKU TL3TM) for reliable European delivery Can the lever be used in rotating assemblies? The compact form and lightweight mass make the lever suitable for use in assemblies where low inertia and stable clamping are required; application specifics should be checked against the toolholder design Are replacement parts or spare levers available? Spare levers with the same specifications (SKU TL3TM) can be ordered through the Metav Werkzeuge range; availability is subject to current stock Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Data inconsistency detected for SKU TC060TM: the item is listed as a Torx screw but the specified driver is "Inbussschlüssel T8" (Allen key T8), creating a conflict in the drive type. This discrepancy suggests a potential error in either the product classification or the associated tool specification, which could lead to confusion for customers or incorrect usage of the product. It is essential to cross-check the technical details, including the drive type and corresponding tool, to ensure accuracy and consistency in the product database. Please verify the product specifications thoroughly before a product description can be generated and published.

Secure consistent bore quality with a cost-effective indexable solution offering a 30.5 mm nominal diameter and a 90 mm cutting length combined with a robust 32 mm shank for stable clamping. Order the tool directly via Metav Werkzeuge or ask our consultants for tailored advice. Indexable drill — 30.5 mm, 90 mm cutting length (Teknik Makina) Indexable drill by Teknik Makina for medium‑depth holemaking using Korloy WCM‑06T3 inserts Compatible with Korloy WCM‑06T3 inserts 30.5 mm nominal diameter 90 mm cutting length for deeper bores 32 mm shank for stable clamping Reduced running costs through replaceable inserts The indexable design relies on replaceable inserts, which lowers unit costs compared with one‑piece cutters. By changing only the cutting tips rather than the entire tool body, workshop expenses are kept predictable and downtime is reduced through rapid insert changes. The result is more economical series production and a clearer cost‑benefit balance when compared with solid tools. Stable clamping and consistent hole quality A 32 mm shank delivers secure fixture in standard toolholders, translating into improved concentricity and repeatability. Combined with the 90 mm cutting length and a 181 mm overall length, the tool is suited to medium‑deep bore operations where vibration damping and stable chip control matter. The configuration supports consistent hole quality and helps to maintain tolerances across production runs. Compatible tooling system for straightforward integration The cutter accepts Korloy WCM‑06T3 inserts, a common family of indexable tips that simplifies reordering and reduces inventory complexity. Using a widely adopted insert standard promotes interoperability with existing toolholders and spare parts, making the unit a practical addition for industrial workshops seeking reliable, standardised tooling solutions. Workshop handling and predictable performance Weighing 0.844 kg, the tool body is substantial enough to resist chatter while remaining manageable for assembly and change‑over. The balanced combination of 30.5 mm diameter and the indexable concept delivers a purposeful compromise between material removal rate and finishing behaviour. For machining operations that demand repeatability rather than one‑off removal rates, this design offers dependable, measurable results. For assured precision and lower running costs choose the Teknik Makina indexable drill U171TM — contact Metav Werkzeuge for availability and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: U171TM Manufacturer: Teknik Makina Core dimensions Diameter: 30.5 mm Cutting length: 90 mm Overall length: 181 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 0.844 kg Tool features Compatible inserts: Korloy WCM‑06T3 Tool type: Indexable drill FAQ What insert type does this cutter use? The cutter accepts Korloy WCM‑06T3 inserts; the indexable setup is designed for straightforward insert replacement and inventory alignment. Which nominal diameter and cutting depth are offered? The tool provides a nominal diameter of 30.5 mm with a cutting length of 90 mm, suitable for medium‑depth bores. Is the shank suitable for standard toolholders? Yes. The 32 mm shank is intended for stable clamping in compatible holders to improve concentricity during drilling. Can this tool be used for series production? The indexable design and replaceable inserts make the tool well suited to series production where reduced running costs and quick tip changes are priorities. What is the product identifier for ordering or technical references? Refer to the SKU U171TM and the Teknik Makina indexable drill when requesting availability or technical details. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise internal finishing combined with large-diameter capacity and reliable insert compatibility to reduce cycle times and improve surface quality; order via Metav Werkzeuge or consult the technical team for application-specific configuration. Internal Boring Tool for Fine Finishing (THB133TM) — 300 mm nominal diameter, for CCMT 09T3 indexable inserts (Teknik Makina) The Internal Boring Tool for Fine Finishing is designed for precision internal turning operations where surface quality and dimensional control are paramount, compatible with CCMT 09T3 indexable inserts for quick tool changes. Compatible with CCMT 09T3 indexable inserts 300 mm nominal diameter for large bores Max cutting diameter 360 mm Overall length 212 mm (L212mm) Achieve consistent surface finish with large-bore capability The tool has been engineered for fine finishing of internal bores where minimal vibration and consistent chip control are essential. With a 300 mm nominal diameter and a max cutting diameter of 360 mm, the holder delivers stability across wider diameters that would otherwise require multiple setups. Using CCMT 09T3 indexable inserts enables predictable cutting geometry and repeatable results; indexable inserts also simplify maintenance cycles and reduce downtime by allowing rapid insert changes without regrinding. Rigidity and engagement designed for repeatable geometry A high cutting height (142 mm) and a robust overall construction maintain cutting edge engagement throughout the pass, which reduces deflection and secures diameter conformity. The combination of a tall cutting face and the tool body length of 212 mm provides improved leverage against bending moments, increasing the probability of first-pass accuracy. This design focus makes the system suitable for series production environments where process stability and part interchangeability are priorities, improving throughput while protecting downstream finishing operations. Practical integration for shop floors and CNC centres The holder is suitable for integration with standard turning tool mountings in lathes and CNC turning centres; the use of standard CCMT 09T3 inserts ensures broad availability of insert grades and coatings to match materials and cutting conditions. For workshops transitioning from smaller-diameter tools, the larger nominal diameter simplifies handling of deep or wide internal profiles by reducing the number of incremental tool changes. The result is a more efficient process flow, fewer tool set-ups and a shorter route to acceptable surface tolerances. Application guidance and material suitability This tool is optimised for fine internal turning across a range of metals when fitted with the appropriate insert grade. Selection of insert grade and cutting data remains critical: carbide grades with appropriate coatings should be chosen to match workpiece materials and desired surface finish. If parabolic or shoulder profiles are required, configuring the THB133TM with specialised insert geometries allows controlled feed and improved surface integrity, making it a versatile choice for precision turning work. Contact Metav Werkzeuge to discuss configuring the Teknik Makina THB133TM for specific production needs or to request an application assessment via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: THB133TM Label: 300mm Ausdrehwerkzeug für die Feinbearbeitung CCMT 09T3 L212mm Manufacturer: Teknik Makina Facts Nominal diameter: 300 mm Max cutting diameter: 360 mm Cutting height: 142 mm Overall length: 212 mm ECLASS: 21041590 Special features For CCMT 09T3 indexable inserts Product type: Internal boring tool for fine finishing SKU: THB133TM UID: THB133TM FAQ Which insert type is compatible with this boring tool? The boring tool is designed for CCMT 09T3 indexable inserts; the THB133TM accepts standard CCMT geometries for finishing applications. What maximum bore diameter can be achieved with this holder? With correct setup the tool supports a maximum cutting diameter of 360 mm, providing capacity for large internal profiles. Is the tool suitable for series production? Yes, the combination of rigidity, cutting height and insert interchangeability makes the THB133TM suitable for series production where repeatability is required. What length and reach does the tool provide? The overall length is 212 mm, offering sufficient reach for many internal turning tasks while maintaining stiffness. Can different insert grades be used for various materials? Different CCMT 09T3 insert grades and coatings can be selected to match the workpiece material and finishing requirements for optimal results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a stable 60 mm mounting and a true 90° cutting angle to achieve consistent corner finishes, while the APKT 1604 compatibility reduces tooling complexity and inventory. Order or request application advice directly from Metav Werkzeuge for seamless integration into production. Corner turning head – Teknik Makina (for APKT 1604 indexable inserts, 60 mm mounting) Corner turning head designed for 90° corner turning operations, accepting APKT 1604 indexable inserts and built for rigid 60 mm mounting in heavy‑duty tool turrets. Robust 60 mm mounting diameter Compatible with APKT 1604 inserts 90° cutting angle for precise cornering Torx M4x10 fixing, T15 key required Consistent 90° corner turning for repeatable parts The 90° design delivers a defined cutting geometry that simplifies set‑up and reduces trial cuts. With its 90° cutting angle and purpose‑built geometry, the head produces repeatable corner profiles, lowering scrap rates and minimising downstream rework. This precise orientation is particularly beneficial for batch production where consistent tolerances are required; the fixed cutting geometry means fewer alignment checks and faster cycle‑time stabilisation. Rigid mounting and mass for vibration damping Engineered with a 60 mm mounting diameter, the assembly provides mechanical stability and improved vibration damping during heavy cutting. The substantial 14.36 kg mass contributes to dynamic rigidity on the turret, which helps to extend insert life and maintain surface finish. These characteristics translate into longer uninterrupted runs and reduced tool change frequency, supporting higher overall machine utilisation on critical turning operations. Fast, secure insert retention to reduce downtime Insert changes are secured by an M4x10 Torx screw requiring a T15 key, offering a simple and robust clamping method familiar to most workshops. Compatibility with APKT 1604 indexable inserts means stocked inserts from common suppliers such as Korloy can be used directly, cutting logistics complexity. The secure fastener arrangement ensures reliable clamping force and straightforward serviceability, which shortens maintenance intervals and helps maintain production continuity. Designed dimensions for flexible integration and productivity With a 300 mm diameter interface and 62 mm overall length, the head balances reach and compactness for tight turning applications. The configuration includes 15 cutting edges, enabling economical use of indexable inserts by maximising available cutting positions before replacement. The geometry and dimensions support stable, predictable cutting performance, so machining strategies can focus on optimising metal‑removal rates rather than compensating for tool instability. Contact Metav Werkzeuge today for tailored application advice and procurement of the Teknik Cutting Tools corner turning head (SKU T195TM); our Emmerich team will advise on integration and delivery. Technical data Article number: T195TM Name: Corner turning head Brand: Teknik Makina Type: for APKT 1604 indexable inserts Facts Mounting diameter: 60 mm Weight: 14.36 kg Cutting angle: 90° Diameter: 300 mm Overall length: 62 mm Cutting edges: 15 Special features Compatible inserts: APKT 1604 Suitable insert manufacturer: Korloy Fastening screw: M4x10 Torx Required key: T15 SKU: T195TM FAQ Which inserts fit this corner turning head? The corner turning head accepts APKT 1604 indexable inserts; compatibility is specified for these insert dimensions and geometries. What mounting diameter is required? A 60 mm mounting diameter is required for stable installation of the Teknik Makina corner turning head (SKU T195TM). What fastener and key are used to secure inserts? Inserts are secured with an M4x10 Torx screw; a T15 key is used for tightening and replacement. What is the overall length and how does it affect reach? The overall length is 62 mm, providing a compact footprint suitable for close‑quartered turning while still offering sufficient reach for standard corner operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of an extended 300 mm reach combined with a 32 mm shank and a secure M16 screw-in connection to maintain rigidity in deep milling operations; order directly via Metav Werkzeuge or consult Metav's advisors for technical clarification. Extension for Screw-in Milling Cutters — 300 mm reach, 32 mm shank (Teknik Makina) Extension for Screw-in Milling Cutters to increase tool reach for deep milling and interrupted-access machining, compatible with standard screw-in cutters and industrial toolholders 300 mm overall length for extended reach 32 mm shank diameter for stable clamping M16 thread for standard screw-in cutters Robust 1.845 kg mass for stability Greater reach with maintained stability for deep milling The 300 mm overall length provides the extra reach required for pockets, recessed features and fixtures that are difficult to access with standard holders. Despite the extended span, the combination of a 32 mm shank and a solid mass of 1.845 kg helps to preserve lateral stability and reduces chatter risk when paired with appropriate machine speeds and feeds. For practical purposes, the extension transforms ordinary screw-in tooling into a solution for deeper cuts without frequent tool changes, enabling more continuous machining cycles and improved workflow efficiency. Precise seating and reliable screw-in interface A defined seating geometry is essential for concentricity and repeatability; the extension incorporates a seating taper with a cone engagement length of 40 mm and a screw-in opening diameter of 28.7 mm, ensuring a secure fit with compatible cutters. The M16 thread provides a widely accepted mechanical interface for screw-in milling heads, so the connection is straightforward and repeatable. These dimensional characteristics minimise axial runout and help maintain cutting-edge life by ensuring the cutter is accurately centred during operation. Suited to workshop and industrial tooling systems Designed with machine shops and industrial production in mind, the extension is intended for use wherever additional reach is required without sacrificing tool control. The component is compatible with screw-in milling cutters and standard toolholders that accept a 32 mm shank and M16 threaded connection; this makes it a practical choice for retrofit tasks as well as for integration into new setups. The clear, dimensional specification supports straightforward planning and inventory management for maintenance teams and purchasing departments seeking predictable performance and easier tool logistics. For extended reach and dependable clamping, contact Metav Werkzeuge to arrange supply of the Teknik Cutting Tools extension VT525TM and to discuss technical compatibility from the Emmerich quality hub. Technical Data Article number: VT525TM Manufacturer: Teknik Cutting Tools SKU: VT525TM Thread: M16 Data Overall length: 300 mm Shank diameter: 32 mm Shank opening diameter: 28.7 mm Cone engagement length: 40 mm Weight: 1.845 kg ECLASS: 21189208 ETIM: EC002219 Special features For screw-in milling cutters (einschraubfräser) Designed for extended-reach milling operations Compatible with standard M16 screw-in interfaces Provides improved rigidity due to mass and shank diameter FAQ Which cutters are compatible with this extension? The extension is compatible with screw-in milling cutters that use an M16 screw-in interface and an insertion/opening close to 28.7 mm, matching the seating geometry of the extension. How does the extension affect machining stability? Stability is supported by the 32 mm shank diameter and the unit mass of 1.845 kg, which together help to reduce vibration and maintain concentricity during deeper cuts. What is the engagement length for the cutter seating? The seating taper offers a cone engagement length of 40 mm, optimised to ensure accurate positioning and to reduce axial runout for repeatable tool changes. Can this extension be used in production environments? Yes; the geometry and dimensions (300 mm length, 32 mm shank, M16 thread) are targeted at workshop and industrial applications where extended reach is required while retaining a secure screw-in connection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of extended reach and secure connection: the extension’s 300 mm overall length and M16 thread enable machining in recessed or hard-to-access areas while maintaining stable clamping and repeatable alignment. Order the tool through Metav Werkzeuge or consult the technical advisors for application-specific guidance. Extension for Screw-in Cutters VT524TM – 300 mm length, M16 threaded connection (Teknik Makina) A durable Extension for Screw-in Cutters VT524TM engineered to extend the reach of screw-in milling cutters for heavy-duty workshop and CNC machining operations. M16 threaded connection for secure mounting 300 mm overall length for increased reach 32 mm shank for stiff tool support Designed for screw-in cutters and milling setups Reach recessed areas without losing stability The elongated design provides a clear advantage when machining pockets, deep slots or complex contours where standard holders cannot reach. With a 300 mm overall length the extension increases accessibility while its sizeable 32 mm shank helps retain rigidity, reducing chatter and improving surface finish. The result is fewer tool changes and more efficient cycle times for long-reach operations. Dependable connection and precise engagement Connection integrity is assured by the M16 thread and the internal opening sized at 28.7 mm, matched to common screw-in cutter interfaces. The 40 mm cone length ensures a secure seating of the cutter assembly and consistent axial positioning. For workshops that prioritise repeatability, this adapter delivers controlled clamping and reliable centring during milling cycles. Built for workshop resilience and easy integration Weighing 1.85 kg, the extension is substantial enough for stable machining yet manageable during tool set-up. Constructed to pair with screw-in cutters, this accessory streamlines tool inventory by enabling longer reach without bespoke toolholders. Compatibility with standard cutter interfaces makes retrofitting straightforward for both manual and CNC-equipped workstations while maintaining machining quality. Contact Metav Werkzeuge for tailored application advice and reliable supply of the Teknik Makina VT524TM extension, delivered from our Emmerich warehouse to suit workshop schedules Technical Data Article number: VT524TM Manufacturer: Teknik Makina ECLASS: 21189208 ETIM: EC002219 Key measurements Total length: 300 mm Shank diameter: 32 mm Screw-in cutter opening: 28.7 mm Cone length (screw-in cutter): 40 mm Thread: M16 Weight: 1.85 kg Compatibility & application Designed for screw-in cutters Extension for increased reach in milling operations Suitable for heavy-duty workshop use FAQ What cutter types does this extension fit? The VT524TM extension for screw-in cutters from Teknik Makina is intended for standard screw-in milling cutters and matches interfaces with an opening of 28.7 mm and an M16 threaded connection. Can the extension be used for deep or hard-to-reach milling tasks? Yes, the 300 mm overall length of the VT524TM provides increased reach for recessed pockets and deep machining, offering a practical solution where additional reach is required. What are the main connection and support dimensions to check? Check the M16 thread, the 32 mm shank diameter and the 28.7 mm screw-in cutter opening when assessing compatibility with existing toolways and toolholders for the VT524TM. Is the VT524TM suitable for both manual and CNC machines? The extension’s design and measurements make the VT524TM suitable for integration into both manual and CNC machining setups, provided the machine and spindle system are compatible with the stated dimensions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of high removal rate and straightforward maintenance for dependable face milling operations — compatible with SPKN 1203 indexable inserts and featuring a 300 mm diameter and 20 cutting edges. Order the face milling cutter head directly via Metav Werkzeuge or ask our consultants for technical advice. Face milling cutter head – 300 mm diameter, for SPKN 1203 indexable inserts (Teknik Makina) The Face milling cutter head is a purpose-built tool for efficient face milling using SPKN 1203 indexable inserts, designed for workshops and small production lines where consistent material removal and quick insert changes are required 300 mm diameter for broad cut width Compatible with SPKN 1203 indexable inserts 20 cutting edges for continuous machining 60 mm toolholder diameter for stable clamping High material removal with controlled cutting forces The cutter head is engineered to deliver consistent throughput: a 300 mm diameter combined with 20 cutting edges enables broad, even passes with less load per insert, which reduces vibration and increases tool life. The use of SPKN 1203 indexable inserts permits rapid replacement without regrinding, so the machining cycle stays productive. The 75° cutting angle promotes a controlled chip flow and helps maintain surface finish while optimising cutting forces — a clear advantage when productivity and repeatability are essential on the shop floor. Fast maintenance and secure clamping for minimal downtime Serviceability is built into the design: the toolholder accepts a 60 mm shank for secure mounting and improved rigidity during higher engagement cuts. Fast replacement of inserts is achieved via a clamping screw specification M8x24-L that is accessed with a 5 mm Allen key, allowing trained staff to perform routine changes and checks quickly. With a net mass of 15.11 kg, the assembly provides inertial stability that aids balance during heavy cuts while still permitting safe handling during maintenance. These details reduce non-productive time and simplify tool management. Versatile in-shop applications and reliable supply chain benefits This milling head is suitable for a wide range of face milling tasks where indexable inserts are preferred for their economy and turnaround speed. The compact overall length (65 mm) supports stiffer setups and better surface performance when paired with appropriate insert geometries. Sourcing through Metav ensures access to consistent stock levels and product support from a partner experienced in equipping workshops; Metav’s European hub in Emmerich acts as a quality filter, helping to keep workflows reliable and supply predictable. The result is fewer interruptions and a smoother production flow. Contact Metav Werkzeuge for detailed specification checks, availability and to discuss the Teknik Cutting Tools face milling cutter head (SKU T162TM) for integration into the current machining setup Technical data SKU: T162TM Manufacturer: Teknik Makina Designation: Face milling cutter head for SPKN 1203 indexable inserts Core dimensions Diameter: 300 mm Toolholder bore / holder diameter: 60 mm e: 101.6 mm Number of cutting edges: 20 Cutting angle: 75° Overall length: 65 mm Weight: 15.11 kg Features and compatibility Compatible with SPKN 1203 indexable inserts Clamping screw: M8x24-L Required Allen key: 5 mm Robust construction for stable face milling Designed for quick insert replacement FAQ Which indexable inserts fit this cutter head? The cutter head is designed for SPKN 1203 indexable inserts, enabling standard insert sizes and geometries to be used for face milling. How many cutting edges does the tool provide and what is the diameter? This face milling cutter head features 20 cutting edges and a 300 mm diameter for wide, efficient passes. What are the mounting and clamping specifications? Mounting uses a 60 mm holder diameter; clamping is secured with an M8x24-L screw that is tightened using a 5 mm Allen key. Is the assembly heavy to handle in a standard workshop? The assembly weighs 15.11 kg, offering improved stability during cutting while remaining manageable for workshop personnel with standard lifting procedures. What benefits does this cutter head bring to small-batch production? With quick replaceable inserts and stable clamping, the head reduces downtime and supports consistent surface quality, making it well suited to small-batch and mixed-production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a 32 mm shank, long 300 mm reach and secure compatibility with DN-- 1506 inserts for stable, repeatable turning operations; order via Metav Werkzeuge or request technical advice from our consultants for application matching. S32T DDUNL boring bar — 32 mm shank, 300 mm overall length (Teknik Makina) A S32T DDUNL boring bar designed for left‑hand turning with compatibility for DN-- 1506 indexable inserts, suited to precision external turning tasks and retrofit into standard toolholder setups. *32 mm shank for stable clamping *300 mm overall length for deep reach *Compatible with DN-- 1506 inserts *Left‑hand execution with 93° approach angle Greater rigidity for consistent surface quality The substantial 32 mm shank and overall mass of 1.835 kg provide enhanced rigidity that reduces vibration during cutting. This structural stiffness translates into more consistent surface finish and longer insert life, because chatter is minimised and insert loads remain steady. The 93° approach angle supports robust engagement on external profiles, enabling reliable material removal with fewer tool changes and more predictable cycle times. Fast insert changes and economical machining With direct compatibility for DN-- 1506 indexable inserts and the DDUN turning geometry, the bar streamlines insert replacement and setup. The 55 mm cutting height offers a broad support area for the insert pocket, helping to maintain secure seating and repeatable geometry after index changes. These characteristics reduce downtime and contribute to a lower cost per component when performing batch turning or rework operations on production lathes. Reach and handling tuned to workshop workflows The 300 mm overall length provides access to deeper turning jobs without compromising clamping stability when used with an appropriate support or toolholder. The left‑hand orientation is specified for operations where the tool must cut counter to the conventional right‑hand feed; marking the bar for left‑hand use avoids setup errors. The ISO designation S32T DDUNL simplifies procurement and toolroom inventory management and ensures correct replacement components are ordered and stocked. Secure Teknik Cutting Tools' S32T DDUNL boring bar through Metav Werkzeuge for dependable supply and application guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K492TM Manufacturer: Teknik Makina Designation: DDUN for DN-- Wendeplatte Core dimensions Shank diameter: 32 mm Cutting height: 55 mm Diameter: 40 mm Overall length: 300 mm Weight: 1.835 kg Approach/cutting angle: 93° Cutting direction: left Special features ISO designation: S32T DDUNL Compatible inserts: DN-- 1506 Clamping designation: 15 FAQ What insert type fits this toolholder? The tool accepts DN-- 1506 indexable inserts; the DDUN geometry is matched to that insert size for correct seating and secure clamping. Is the bar suitable for deep turning operations? Yes, the 300 mm overall length offers extended reach for deeper external turning, provided correct clamping and toolholder support are used. Which orientation is this boring bar designed for? This model is manufactured for left‑hand cutting; the ISO code S32T DDUNL and the left direction designation indicate counter‑clockwise cutting on the workpiece. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of compatibility with VBMT 1604 inserts, rigid 32 mm shank and a long reach for stable internal turning operations; order the boring bar directly via Metav Werkzeuge or consult the specialists for application guidance. Boring bar S32T SVUBL — SVUB for VBMT indexable inserts, 32 mm shank (Teknik Makina) Boring bar S32T SVUBL is a left-hand SVUB tool designed for internal turning with VBMT 1604 indexable inserts, suited to medium and deep bore operations in workshop and light industrial lathe applications Left-hand cutting for specialised set-ups Compatible with VBMT 1604 inserts 32 mm shank for rigid clamping 300 mm overall length for deeper bores Greater precision through indexable insert compatibility The toolholder is built for reliable results when paired with indexable inserts; the compatibility with VBMT 1604 ensures quick insert changes and consistent cutting-edge geometry. Indexable inserts allow the edge to be rotated or replaced without removing the holder, which shortens downtime and preserves repeatable part quality. The S32T SVUBL designation indicates the standardised interface and cutting orientation, helping to match the holder easily to existing tooling systems and clamping fixtures. Stable clamping and improved cutting performance A 32 mm shank diameter and a body diameter of 40 mm provide the torsional stiffness needed to reduce chatter in internal turning, while the 300 mm overall length gives the reach required for deeper bores. The combination of a robust shank and the correct clamping dimension (designation 16) reduces vibration and enhances tool life, which translates into fewer reworks and more predictable cycle times on the lathe. The 93° cutting angle contributes to appropriate chip flow and engagement for common turning tasks. Practical workshop integration and handling The left-hand cutting configuration and a cutting height of 50 mm simplify set-up with standard tool posts and toolholders used in lathe shops. The bar is supplied in a form that matches common clamping systems, allowing straightforward replacement within existing toolfamilies. Supplied by Teknik Makina and distributed via Metav Werkzeuge, the component benefits from a supplier network that emphasises consistent stock and quality control—supporting reliable delivery for production planning and reducing procurement complexity. For tailored tooling advice and secure supply of the Teknik Makina S32T SVUBL boring bar, contact Metav Werkzeuge for expert assistance and dependable delivery from Emmerich. Technical data Article number: K288TM ISO designation: S32T SVUBL Manufacturer: Teknik Makina Numbers / core technical data Shank diameter: 32 mm Cutting height: 50 mm Overall length: 300 mm Body diameter: 40 Weight: 1.822 kg Cutting angle: 93° Cutting direction: left Special features / versions Compatible with VBMT 1604 indexable inserts SVUB type for VBMT inserts Clamp holder designation: 16 Design suitable for internal turning and boring FAQ Which inserts fit this toolholder? The S32T SVUBL boring bar accepts VBMT 1604 indexable inserts; this combination (Teknik Makina, SKU K288TM) is intended for standard VBMT insert geometry to allow fast indexing and replacement. Is the cutting direction left-hand or right-hand? The tool is specified for left-hand cutting, suitable for lathes and set-ups that require a left-hand approach to the bore. What are the key dimensions to check for my toolpost? Check the 32 mm shank diameter, the 300 mm overall length, and the clamp holder designation 16 to ensure proper clamping and reach. How does the 93° cutting angle influence machining? A 93° cutting angle moderates radial and axial engagement, supporting predictable chip flow and suitability for a range of internal turning tasks with VBMT inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust tooling solution that combines secure clamping, clear compatibility with 16–22ER indexable inserts and reliable left‑hand cutting performance; order directly through Metav Werkzeuge or contact a consultant for tailored advice. SIL S32T Boring Bar – for 16–22ER indexable inserts, ⌀32 mm shank The SIL S32T boring bar is a left‑hand cutting tool designed for precision metal‑removal tasks in CNC and turning operations, compatible with 16–22ER indexable inserts and ER16 clamping systems Left‑hand cutting orientation for specific turning tasks Shank diameter 32 mm for rigid clamping Compatible with 16–22ER indexable inserts Stable clamping for consistent machining results A secure hold is essential for predictable chip formation and surface finish; this tool features a shank diameter of 32 mm designed to work with standard ER16 clamping systems, which minimises vibration and run‑out during operation. The result is improved tool life and reduced scrap rates, particularly when machining demanding geometries. For workshops seeking measurable gains in process stability, the combination of a solid shank and precise clamping delivers clear productivity advantages without complex setup. Optimised for left‑hand cutting and insert flexibility Left‑hand orientation supports operations where conventional right‑hand tools are unsuitable; the bar is engineered for left‑hand cutting, allowing safe and effective machining in specialised set‑ups. It accepts a range of 16–22ER indexable inserts, giving flexibility for finish or roughing inserts and enabling rapid insert changes to adapt cutting geometry. This versatility reduces downtime and keeps the machining centre running efficiently, translating to lower operating costs per component. Dimensions and handling that suit busy workshops With a total length of 300 mm and an outer diameter of 39 mm, the design balances reach with rigidity, while the cutting height of 60 mm provides sufficient clearance and insert engagement for standard turning tasks. The tool’s weight of 1.838 kg reflects its solid construction without being cumbersome to handle during tool changes. Clear dimensional data simplifies process planning and fixture design, ensuring the holder integrates smoothly into existing tool assemblies. Practical explanation for newcomers to indexable tooling Indexable inserts are replaceable cutting tips mounted in a pocket; they remove the need to regrind tools and permit fast changeover. The ER16 reference denotes a common collet/clamping size used to secure shanks and adapters. By combining an industry‑standard ER16 interface with compatibility for 16–22ER insert sizes, this boring bar supports a wide set of cutters and grades, making it suitable for both experienced toolmakers and smaller workshops expanding into CNC turning. Reliability and supply assurance from a precision partner Sourced for industrial use, the bar is intended for regular production environments where part repeatability matters. Metav Werkzeuge’s stock and logistics in Emmerich act as a quality filter for European customers, offering dependable availability and clear procurement pathways. Investing in standardised tool interfaces and proven geometries reduces the risk of unexpected downtime and supports continuous production planning. For personalised advice on integrating this SIL S32T boring bar into existing toolholders or for procurement from Metav Werkzeuge in Emmerich, contact our team for a focused technical discussion and reliable delivery Technical data Article number: K332TM Brand: Teknik Makina ISO designation: SIL S32T Facts Shank diameter: 32 mm Total length: 300 mm Outer diameter: 39 mm Cutting height: 60 mm Weight: 1.838 kg Cutting direction: left‑hand Special features Compatibility: 16–22ER indexable inserts Clamping interface: ER16 Application: CNC turning / boring tasks Target users: workshops and industrial turning operations FAQ What insert sizes fit this boring bar? The bar accepts 16–22ER indexable inserts, allowing selection of grades and geometries for finish or roughing operations. Is the shank compatible with standard collets? Yes, the SIL S32T shank diameter of 32 mm is intended for use with ER16 clamping arrangements and standard collet adaptors. Can this tool be used for right‑hand cutting? No, this specific design is configured for left‑hand cutting; use a corresponding right‑hand bar for conventional cutting directions. How does the bar support vibration reduction? The combination of a robust 32 mm shank and ER16 clamping reduces run‑out and vibration, improving surface finish and insert life. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact combination of stability and compatibility: the solid SIR S32T design with a Ø32 mm shaft and 60 mm cutting height delivers steady performance for indexable-insert boring, while the 300 mm overall length supports longer reach. Order the SIR S32T boring bar directly via Metav Werkzeuge or consult our specialists for application matching. SIR S32T boring bar by Teknik Makina — for 16 IR indexable inserts, Ø32 mm shaft The SIR S32T boring bar is a right-hand machining tool for use with 16 IR indexable inserts, designed for secure clamping in standard IR16 holders and medium-reach turning and boring tasks Shaft diameter 32 mm For 16 IR indexable inserts 300 mm overall length 60 mm cutting height Faster, more stable machining with proven insert compatibility The SIR S32T is engineered to deliver measurable gains in process stability by combining a stiff Ø32 mm shaft with a robust head geometry suited to indexable inserts. Compatibility with the common 16 IR insert format reduces setup complexity and lowers the number of different tool sizes required in a workshop. The right-hand cutting orientation is matched to standard lathe turning cycles, enabling predictable chip flow and consistent surface finish. By using a short list of standard components, toolholders and inserts are easier to stock and replace, which supports uninterrupted production runs. Simple set-up and secure clamping for less downtime A focus on practical assembly keeps maintenance straightforward: the tool uses a Torx drive and standard fasteners, with a T15 key and M3.5x11 Torx screw specified for insert retention. The bar is designed for clamping in an IR16 holder and interfaces with the TA060 support plate and BSP010 shim where needed. These standardised parts mean insert changes and reconditioning take minimal time, while the secure clamping arrangement reduces the need for repeated re-tightening during shifts. The result is shorter changeover times and a lower risk of workpiece rejects due to unstable tooling. Workshop versatility and predictable reach for common turning tasks With a total length of 300 mm, the bar balances reach and rigidity for many routine boring and turning operations in general workshop and light industrial environments. The 60 mm cutting height provides a clear datum for height adjustment and helps maintain concentricity when replacing inserts. Thanks to the ISO designation and clear article coding, integration into production planning and tool management systems is straightforward. The design supports efficient inventory planning: one bar covers a set of compatible inserts and mounting components, simplifying procurement and logistics for maintenance crews and purchasing departments. For tailored advice on integrating Teknik Makina’s SIR S32T into existing toolholders and machining cycles, contact Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com to discuss compatibility and delivery options. Technical data Article number: K340TM Manufacturer: Teknik Cutting Tools ISO designation: SIR S32T eClass: 21180806 Facts Shaft diameter: 32 mm Cutting height: 60 mm Overall length: 300 mm Outside diameter: 39 mm Weight: 1.83 kg Special features For indexable inserts: 16 IR Toolholder compatibility: IR16 Support plate: TA060 Shim: BSP010 Torx key: T15 Torx screw: M3.5x11 Cutting direction: right Product name (English): SIR for IR Indexable Inserts FAQ What insert size does this boring bar accept? The SIR S32T accepts 16 IR indexable inserts and is designed for use with IR16 clamping holders. Is the bar suitable for long-reach operations? With an overall length of 300 mm, the bar offers medium reach; rigidity is maintained by the Ø32 mm shaft to reduce vibration in common workshop tasks. Which fasteners are used for insert retention? Insert retention uses a Torx drive system; the specified key size is T15 and the screw is M3.5x11. Can the bar be clamped in standard IR16 holders? Yes. The SIR S32T is designed for secure clamping in IR16 toolholders and interfaces with the TA060 support plate and BSP010 shim where required. What is the article number for ordering and inventory? The article number is K340TM (Teknik Makina SIR S32T). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from a compact combination of right-hand cutting, compatibility with 22 IR indexable inserts and a rigid 32 mm shank for stable machining; order or request technical advice via Metav Werkzeuge to ensure a seamless integration into existing turning setups. SIR S32T Boring Bar — SIR for IR Indexable Inserts, right-hand, 32 mm shank (Teknik Makina) SIR S32T is a robust boring bar intended for turning operations with IR indexable inserts, offering a practical balance of rigidity and accessibility for workshop and production environments. Right-hand cutting orientation Compatible with 22 IR indexable inserts Shank Ø 32 mm for enhanced rigidity Overall length 300 mm for deep-reach capability Stable clamping for a consistent surface finish The boring bar is equipped for secure insert clamping via the IR22 holder, which ensures repeatable tool positioning and reduces vibration. This level of rigidity supports improved surface quality and extended insert life, so fewer tool changes are required during a production shift. The clamping screw specification (Torx T15, M4x15) is standardised for quick replacement, and the inclusion of the TA063 support plate and BSP010 spacer allows straightforward integration into established tool setups. Efficient machining with right-hand cutting and clear dimensions Designed as a right-hand cut tool, the bar delivers predictable chip flow and cutting behaviour for conventional turning processes. The 32 mm shank diameter increases resistance to bending, while the 40 mm cutting height provides the engagement needed for effective chip evacuation. The clear dimensional data (including a 300 mm overall length and an outer diameter of 39 mm) enables process planners to calculate reach, overhang and maximum allowable spindle speeds with confidence, supporting throughput improvements in batch production. Quick compatibility with common indexable inserts and holders Compatibility with 22 IR indexable inserts means the tool can be stocked alongside widely used insert types, reducing procurement complexity. The ISO designation SIR S32T signals the intended insert geometry and clamping method; this helps purchasing and process engineering teams match toolholders and inserts without ambiguity. The tool is supplied with standard fastening hardware and references to the IR22 clamping holder, simplifying spare-part management and minimising downtime. Built for workshop reliability and clear serviceability Constructed for routine industrial use, the bar’s specifications make maintenance predictable: the Torx interface (T15) is commonly available, and replacement parts follow standard dimensions. The nominal weight of 1.82 kg contributes to handling stability without imposing excessive load on tool turrets or boring spindles. Where traceability and supply reliability matter, Metav Werkzeuge’s distribution from Emmerich acts as a quality filter for the European market, supporting uninterrupted production with consistent product availability. Contact Metav Werkzeuge for tailored technical information or to secure the SIR S32T boring bar; Metav’s specialists in Emmerich provide precise advice and fast handling to fit this component into existing turning workflows. Technical data Article number: K344TM ISO designation: SIR S32T Brand: Teknik Makina Compatible insert: 22 IR Clamping holder reference: IR22 U-plate: TA063 Spacer: BSP010 Facts Shank diameter: 32 mm Cutting height: 40 mm Overall length: 300 mm Weight: 1.82 kg Outer diameter: 39 mm Cutting direction: right Special features Right-hand cutting orientation For indexable inserts (SIR for IR indexable inserts) Torx screw: M4x15 Torx key size: T15 ISO name: SIR S32T FAQ What insert type fits this boring bar? The SIR S32T boring bar is designed for 22 IR indexable inserts and is compatible with holders specified as IR22. Is the cutting orientation suitable for conventional turning machines? Yes; the tool is manufactured as a right-hand cutting boring bar, suitable for standard turning operations. What are the key dimensions to check for machine compatibility? Critical dimensions include the 32 mm shank diameter, 300 mm overall length and 40 mm cutting height which determine clearance, overhang and rigidity requirements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rigidity, indexable-insert compatibility and straightforward maintenance for consistent cycle times and lower tooling costs; order directly via Metav Werkzeuge or consult our specialists for application advice. SIR S40T drilling bar by Teknik Makina – 40 mm shaft, 60 mm cutting height The SIR S40T drilling bar is a right-hand toolholder designed for heavy-duty machining with IR indexable inserts, suited to standard clamping systems and machining centres 40 mm shaft diameter for rigid clamping 60 mm effective cutting height Compatible with IR16 indexable inserts Right-hand cutting orientation for common set-ups Built for rigidity and repeatable accuracy The SIR S40T drilling bar is engineered to deliver stable machining through a robust 40 mm shaft and a substantial overall length that resists deflection under load. The increased rigidity reduces vibration and improves hole quality, which in turn lowers rework rates and scrap. Cross-referenced to common clamping systems, the toolholder’s mass distribution and geometry support consistent concentricity and repeatable accuracy across batches, making it suitable for medium- to heavy-duty drilling applications in production environments. Efficient indexable-insert concept to cut cycle time Designed for use with IR16 indexable inserts, the system provides fast tool changes and predictable cutting performance. The 60 mm cutting height allows for deeper engagement per stroke where applicable, reducing the need for multiple passes. Indexable inserts mean less downtime for regrinding: only the cutting insert requires replacement when worn, not the entire tool, which improves overall cost-efficiency and keeps machine uptime high. The right-hand cutting orientation aligns with standard spindle rotations, ensuring straightforward integration into established process routines. Simple mounting and low-maintenance operation Installation and service are streamlined: the holder is compatible with the IR16 clamping holder and uses standard fixing components such as Torx T15 screws and M3.5x11 fastenings for secure, repeatable assembly. The tool interfaces with a TA060 U-plate and a BSP010 gauge where fixture references are required, which simplifies tool-set planning on the shop floor. Routine maintenance focuses on insert replacement and torque checks on the key fastenings, keeping shop-floor procedures efficient and predictable while preserving machining accuracy. Contact Metav Werkzeuge today to discuss Teknik Makina SIR S40T suitability for specific applications or to request a tailored tooling recommendation from their Emmerich-based specialists — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K341TM Manufacturer: Teknik Makina ISO designation: SIR S40T Compatible designation: SIR for IR Indexable Inserts Cutting direction: right Data Shaft diameter: 40 mm Cutting height: 60 mm Overall length: 300 mm Weight: 2.83 kg Diameter: 45 mm For inserts: 16 IR Special features Compatible with IR16 clamping holder U-plate: TA060 Pass gauge: BSP010 Torx key: T15 Torx screw: M3,5x11 Right-hand cutting orientation FAQ What inserts fit the SIR S40T drilling bar? The SIR S40T drilling bar is designed for IR16 indexable inserts, providing a standardised cutting solution for quick index changes. Is the SIR S40T suitable for deep-hole drilling? The toolholder’s 60 mm cutting height allows for deeper single-pass engagement than shorter holders, but final suitability depends on material and machine rigidity. Which clamping components are required? Mounting typically uses the IR16 clamping holder, a TA060 U-plate and a BSP010 pass gauge; Torx T15 fastenings secure the assembly. Does the tool come with screws or plates included? The technical information lists compatible parts (Torx screw M3,5x11; U-plate TA060; pass gauge BSP010); full delivery scope should be confirmed with Metav Werkzeuge for the chosen configuration. What advantages do indexable inserts provide with this drilling bar? Indexable inserts reduce downtime, lower tooling costs and enable predictable cutting performance; the SIR system supports quick insert indexing and straightforward replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a rigid 40 mm shank, a 300 mm overall length and a secure Torx clamping system for stable, repeatable boring operations; order the boring bar directly via Metav Werkzeuge or consult our specialists for application advice. SIR S40T boring bar — right‑hand tool for 22 IR indexable inserts (Teknik Makina) The SIR S40T boring bar is a right‑hand machining tool for IR indexable inserts, engineered for extended reach and robust shank stability. 40 mm shank for high rigidity 300 mm overall length for extended reach Compatible with 22 IR indexable inserts Secure Torx T15 clamping with M4x15 screws Enhanced stability for consistent bore quality The tool body delivers improved rigidity, primarily through its 40 mm shank and a 300 mm overall length that balances reach and stiffness for longer bores. With an external diameter of 46 mm and a mass of 2.84 kg, the design reduces vibration and run‑out, which directly supports repeatable hole tolerances and extended insert life. These mechanical advantages translate into fewer reworks and more predictable cycle times on production lines. Fast, secure insert changes that cut setup time Compatibility with 22 IR indexable inserts and the dedicated IR22 clamp ensure a reproducible cutting edge position after each change. The clamping system uses Torx T15 drive and M4x15 screws together with a U‑plate (TA063) and pass ring (BSP010) for reliable seating and torque control. This straightforward interface delivers quick insert replacement and consistent tool geometry, which eases tool presetter procedures and keeps machine downtime to a minimum. Designed for workshop integration and efficient machining Right‑hand cutting orientation and an ISO designation that matches common toolholder standards support rapid integration into existing setups. The combination of stable geometry and standardised fastening components helps maintain cutting parameters across shifts and operators, supporting lean production and predictable output. Supplied by Teknik Makina and distributed through Metav Werkzeuge, the component fits into a supply chain that emphasises dependable stock and quality control for industrial workshops. For tailored advice on integrating Teknik Makina's SIR system into existing spindle setups, contact Metav Werkzeuge for procurement and delivery from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: K345TM Model: SIR S40T Description: SIR for IR Indexable Inserts Manufacturer: Teknik Makina Facts Shank diameter: 40 mm Cutting height: 60 mm Overall length: 300 mm Diameter: 46 mm Weight: 2.84 kg Special features Compatible inserts: 22 IR Clamp holder: IR22 Torx key: T15 Torx screw: M4x15 U-plate: TA063 Pass ring: BSP010 Cutting direction: Right-hand FAQ Which indexable inserts fit this boring bar? The SIR S40T is specified for 22 IR indexable inserts; Teknik Makina’s IR system and the IR22 clamp holder ensure correct seating and positioning (SKU K345TM). What are the key dimensions that affect rigidity? Shank diameter 40 mm and an overall length of 300 mm are the main contributors to rigidity and vibration resistance for this boring bar. How is the insert secured in the seat? Insert clamping is achieved with the IR22 clamp, a U‑plate (TA063) and M4x15 screws tightened with a Torx T15 driver for consistent torque and repeatable seating. Is the tool suitable for long‑reach bores? With a 300 mm overall length and a balanced diameter, the bar is intended for extended reach operations while maintaining acceptable stiffness for many workshop applications. What cutting direction should be used with this tool? The tool is designed for right‑hand cutting operations, matching common lathe and boring centre conventions (Teknik Makina, SKU K345TM). Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Taking advantage of a compact design and internal coolant, this milling body delivers consistent chip evacuation and stable cutting for insert-based roughing and finishing. Combine the 30 mm diameter, sturdy 25 mm shank and Korloy-compatible insert system for reliable production cycles — order directly via Metav Werkzeuge or ask our consultants for application advice. Shank milling cutter S268-1TM — 30 mm with internal coolant (Teknik Makina) Shank milling cutter S268-1TM is an indexable insert milling body for AP-- 1604 inserts, optimised for precision face and slot milling with integrated coolant supply. 30 mm cutting diameter Internal coolant for chip evacuation Compatible with Korloy AP-- 1604 inserts 25 mm shank for rigid clamping Higher throughput through stable cutting performance The milling body is designed to increase machining efficiency by combining a 30 mm diameter with a short, rigid 25 mm shank that reduces vibration and improves tool life. With three cutting edges and a dedicated insert system, the tool enables steady material removal rates and predictable tool-change cycles. The result is fewer interruptions on the shop floor and a measurable improvement in cycle times for both roughing and semi-finishing operations. Reliable chip control and cooling for consistent results Built-in internal coolant directs cutting fluid straight to the cutting zone, which supports effective chip evacuation and temperature control. That targeted coolant flow reduces built-up edge and helps maintain the life of Korloy AP-- 1604 indexable inserts, thus lowering tooling costs over extended production runs. For contractors and maintenance teams, the self-contained coolant path simplifies setup compared with external-only supply systems. Compatibility and simple mounting for fast tool changes Designed for compatibility with Korloy AP-- 1604 inserts, the cutter body accepts the standard M4x10 Torx fastening and is supplied with a T15 Torx interface for secure clamping. The intuitive assembly minimises downtime during insert changes and supports consistent seat torque, improving repeatability. For workshops running multiple machines, the standardised interface simplifies inventory and reduces adapter needs. Application focus and material suitability This indexable milling body is suited to general-purpose machining where insert economics and rigid clamping are priorities. The geometry and coolant provision favour operations on steels and common alloys, offering reliable chip breaking and surface finish control in face milling and shallow slotting tasks. The compact overall length and balanced construction make it appropriate for both standalone milling heads and CNC machines with limited tool overhang. For tailored advice on integrating this Teknik Makina cutter into production, contact Metav Werkzeuge for specification matching and ordering support — Metav’s specialists in Emmerich can advise on insert selection and coolant setup. Technical data Article number: S268-1TM SKU: S268-1TM Manufacturer: Teknik Makina Diameter: 30 mm Overall length: 150 mm Shank diameter: 25 mm Cutting length (shank to cutting edge): 55 mm Number of cutting edges: 3 Weight: 0.575 kg Torx key: T15 Torx screw: M4x10 Internal coolant Compatible with Korloy AP-- 1604 indexable inserts Indexable insert milling body Suitable for face milling and shallow slotting FAQ How does the internal coolant improve tool life? Internal coolant channels deliver cutting fluid directly to the contact zone; this reduces heat and aids chip evacuation, which helps the S268-1TM maintain insert condition and prolong service intervals. Which inserts are required for this milling body? The cutter accepts AP-- 1604 indexable inserts; compatibility with Korloy-manufactured inserts ensures correct seating and reliable cutting geometry. Is the shank suitable for standard tool holders? Yes — the 25 mm shank is intended for rigid clamping in standard 25 mm tool holders and provides improved stability compared with smaller shank diameters. Can the milling body be used for finishing operations? With appropriate inserts and reduced cutting depths, the milling body offers sufficient rigidity and coolant support for semi-finishing and light finishing tasks. What fasteners are used for insert mounting? The assembly uses an M4x10 Torx screw with a T15 interface for secure and repeatable insert clamping. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust shank support, precise insert compatibility and easy serviceability to maintain consistent milling results; order the tool via Metav Werkzeuge or contact the consultants for tailored advice. S268TM indexable shank cutter – 30 mm diameter, 25 mm shank (Teknik Makina) A S268TM indexable shank cutter designed for use with APKT 1604 indexable inserts, offering a compact overall length and secure shank for stable milling operations. 30 mm cutting diameter 25 mm shank for rigid clamping Compatible with APKT 1604 inserts Three cutting edges for smooth chip removal High-throughput milling with consistent chip control The S268TM is engineered as an indexable holder that combines a 30 mm diameter with three cutting edges and a 90° cutting geometry to enable steady material removal. The tool accepts APKT 1604 indexable inserts, so insert changes are rapid and downtime is reduced; this approach keeps running costs lower than solid-tool replacements. Precision of cut is supported by a well defined clamping interface and a short 55 mm cutting length, which together reduce chatter and improve process stability. The result is predictable performance in serial production and smaller batches alike. Stable clamping and straightforward setup for workshop environments A 25 mm shank and a compact 150 mm overall length contribute to high torsional stiffness and reliable toolholding when mounted in standard toolholders. The cutter is secured with an M4x10 Torx fixing screw and serviced with a T15 key, which simplifies maintenance routines and repeatable assembly. At a weight of 0.575 kg the tool balances manageable handling with the mass needed to dampen vibration, supporting improved surface finish and longer insert life. Assembly and index changes are kept simple, which benefits both experienced operators and general workshop staff. Compatibility, procurement and dependable sourcing Compatibility with APKT 1604 inserts from Korloy and the clear mechanical specification make this indexable milling solution easy to integrate into existing machining lines. Where tool selection must be justified, the facts are straightforward: standard insert format for broad availability, defined screw and key sizes for maintenance planning, and measurable dimensions for fixture checks. Procurement is simplified by ordering through Metav Werkzeuge, whose inventory and service ethos support reliable supply and technical backing for industrial and craft environments. Contact Metav Werkzeuge today for expert advice on Teknik Makina tools and to arrange supply of the S268TM indexable shank cutter; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S268TM Manufacturer: Teknik Makina Product name: Indexable shank cutter for APKT 1604 indexable inserts ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 30 mm Shank diameter: 25 mm Cutting length: 55 mm Overall length: 150 mm Number of cutting edges: 3 Weight: 0.575 kg Cutting angle: 90° Special features Compatible inserts: APKT 1604 Compatible insert manufacturer: Korloy Fixing screw: M4x10 Torx Torx key size: T15 FAQ What insert type fits this cutter? The cutter accepts APKT 1604 indexable inserts; Korloy is listed as a compatible insert manufacturer for straightforward sourcing. What are the main dimensions to check for toolholder compatibility? Key dimensions are 30 mm cutter diameter, 25 mm shank diameter and 150 mm overall length; these determine holder and fixture compatibility. Which screw and key are required for insert fixing? An M4x10 Torx screw secures the insert seat, and a T15 Torx key is specified for tightening and maintenance. Is this tool suitable for serial production? Yes, the indexable concept with three cutting edges and a short cutting length supports stable, repeatable milling that is well suited to batch and serial production. Who supplies and supports this product? The tool is supplied via Metav Werkzeuge and is designated under the manufacturer Teknik Makina with SKU S268TM for order and inventory reference. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable solution that pairs APKT 1604 compatibility with a rigid Ø30 mm cutter body and a Shank Ø25 mm for secure clamping; the result is reduced setup time and stable machining. Order the tool directly via Metav Werkzeuge or contact our consultants for application advice. Shank cutter S434TM — for APKT 1604 indexable inserts, Ø30 mm, 3-edge, Teknik Makina Shank cutter S434TM is a shank-mounted milling cutter body designed for medium-duty indexable milling tasks with APKT 1604 inserts Compatible with APKT 1604 inserts Ø30 mm cutter body Shank Ø25 mm for rigid clamping Three cutting edges for steady removal Total length 250 mm for extended reach Precision compatibility for indexable milling The S434TM is built specifically for APKT 1604 indexable inserts and Korloy insert geometries, which allows a rapid insert change and consistent cutting geometry. The combination of a Ø30 mm cutter body and a Shank Ø25 mm provides a predictable stiffness profile; this reduces chatter and stabilises the cutting process. Since the insert type is standardised, insert inventory can be consolidated and downtime minimised without compromising the cutting edge position. Secure clamping and vibration control for improved surface finish A short 55 mm cutting length paired with a Total length 250 mm balances reach and rigidity for many shop-floor set-ups. The insert pocket is fastened with an M4x10 Torx screw tightened with a T15 key, ensuring positive clamping and repeatable seating of each indexable insert. The result is reliable torque transmission and reduced micro-movement at the cutting edge, which supports a more consistent surface finish and longer insert life when compared with loosely clamped assemblies. Consistent chip control and efficient material removal The tool’s 3 cutting edges and a 90° cutting angle deliver even chip distribution and predictable engagement with the workpiece, helping to control cutting forces and maintain cycle times. The cutter body format makes it suitable for interrupted and continuous cuts where indexable tooling is preferred for quick edge changes. The design focuses on operational efficiency: fewer tool changes, straightforward insert indexing and a stable cutting geometry for reproducible results. Contact Metav Werkzeuge today to discuss the Teknik Makina S434TM shank cutter’s suitability for specific milling applications or to request a bespoke quotation — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data SKU: S434TM Manufacturer: Teknik Makina Article: Shank cutter for APKT 1604 indexable inserts EClass: 21180806 ETIM: EC011860 Core dimensions Diameter: 30 mm Shank diameter: 25 mm Cutting length (shank): 55 mm Overall length: 250 mm Number of cutting edges: 3 Weight: 1.028 kg Cutting angle: 90° Features and compatibility Compatible inserts: APKT 1604 Compatible insert manufacturer: Korloy Torx screw: M4x10 Torx key size: T15 FAQ Which insert type is required for this cutter? The S434TM accepts APKT 1604 indexable inserts; inserts from Korloy in this format are compatible with the cutter body. What clamping hardware secures the insert? Inserts are secured with an M4x10 Torx screw; a T15 Torx key is specified for tightening. How does the shank diameter affect performance? The Shank Ø25 mm increases axial and torsional rigidity compared with slimmer shanks, improving stability for the cutter body during machining. What is the working reach of the tool? The overall length is 250 mm with a 55 mm cutting length; this offers extended reach while maintaining a compromise between accessibility and stiffness. How many cutting edges are fitted and what is the cutting geometry? The cutter body carries 3 cutting edges and a 90° cutting angle, designed for steady material removal and balanced chip formation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, insert-based milling solution that combines precise cutting geometry and sturdy shank support for reliable chip evacuation and consistent surface finish — compatible with APKT 1604 indexable inserts and fitted with a secure Torx clamping screw; order directly via Metav Werkzeuge or consult our technical advisers for application-specific guidance. Shaft milling cutter S258TM — for APKT 1604 indexable inserts, 30 mm diameter (Teknik Makina) Shaft milling cutter S258TM engineered for versatile face and slot milling operations using APKT 1604 indexable inserts, offering a stable 25 mm shank and three cutting edges for smooth material removal 30 mm cutting diameter, versatile milling 25 mm shank for stable clamping Three cutting edges for smooth removal Compatible with APKT 1604 Korloy inserts High cutting performance for repeatable production The S258TM body delivers consistent milling performance by combining a 30 mm cutting diameter with a robust 25 mm shank, ensuring secure clamping in standard toolholders. The tool body accepts APKT 1604 indexable inserts, which allow fast reconditioning of the cutting edge and predictable wear behaviour; this reduces downtime because inserts can be replaced without regrinding. The three-blade configuration improves chip flow and evens out cutting forces, which helps to maintain dimensional stability across serial runs while keeping spindle loads within expected limits. Fast insert changes and reliable clamping Designed for straightforward maintenance, the cutter uses a Torx M4x10 clamping screw and a T15 key for insert retention. The standardised screw interface ensures repeatable torque application and reduces the risk of incorrect fastening. Insert-based tooling minimises tool inventory complexity: worn edges are replaced quickly, which keeps setup times short and supports lean production. The combination of secure clamping and standardised insert geometry supports predictable machining cycles and repeatable component quality. Practical handling that boosts workshop throughput With a 120 mm overall length and 45 mm effective cutting length, the milling body balances reach and rigidity for common face and slot operations. Its modest mass of 0.46 kg makes handling and tool changes simple while still providing the stiffness required for accurate results. Using indexable inserts cuts indirect costs by avoiding full-tool reconditioning; the modular approach supports quick adaptions to varying cutting strategies, promoting efficient workshop workflows and reduced lead times for small to medium production batches. Robust specification for industrial use The milling body is compatible with Korloy-manufactured APKT 1604 inserts and is suitable for wide-ranging machining tasks where indexable tooling is preferred. The component’s design prioritises chip evacuation and stable cutting geometry, which contributes to improved surface finish and longer insert life under typical cutting conditions. For operations seeking a balance between flexibility and production reliability, the S258TM milling body represents a practical choice that integrates easily into existing tool systems. For tailored advice on integrating the S258TM shaft milling cutter into a machining cell, contact Metav Werkzeuge in Emmerich — technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to assist with selection and ordering Technical data SKU: S258TM Manufacturer: Teknik Makina Article: Shaft milling cutter for APKT 1604 Indexable Inserts ETIM: EC011860 ECLASS: 21180806 Core measurements Cutting diameter: 30 mm Shank diameter: 25 mm Cutting length: 45 mm Overall length: 120 mm Number of cutting edges: 3 Weight: 0.46 kg Special features Compatible inserts: APKT 1604 Compatible insert manufacturer: Korloy Clamping screw: Torx M4x10 Torx key size: T15 FAQ Which inserts fit this milling body? The milling body accepts APKT 1604 indexable inserts; Korloy APKT 1604 inserts are specified as compatible. What are the main dimensions to consider for toolholder selection? Key dimensions are a 25 mm shank diameter and 120 mm overall length; these determine holder compatibility and reach. How many cutting edges does the tool body use and what is the benefit? The body uses three cutting edges, which smooths cutting forces and improves chip evacuation for a more consistent finish. Which screw and key are required for insert clamping? A Torx M4x10 clamping screw and a T15 Torx key are used for secure insert retention. Is this milling body suitable for high-production environments? Yes; the insert-based design and standard clamping interface facilitate fast insert changes and predictable tool behaviour suited to serial production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of high material-removal capacity, precise insert clamping and compact shank design to keep machining runs efficient and predictable; order via Metav Werkzeuge or contact our advisors for specification matching. Shaft milling cutter S278TM — 30 mm diameter, for APKT 1604 indexable inserts (Teknik Makina) The S278TM shaft milling cutter is an indexable-insert tool designed for productivity-focused milling applications that require quick insert changes and secure fastening 30 mm cutting diameter 25 mm shank diameter 55 mm cutting length Compatible with APKT 1604 inserts Faster cycle times through stable cutting geometry The S278TM is engineered to deliver consistent material removal by combining a 30 mm cutting diameter with a three-flute cutter geometry. The balanced flute arrangement and the 90° cutting angle reduce vibration and enable more reliable chip evacuation, which in turn minimises rework and shortens cycle times. For production environments where throughput and repeatability are paramount, this configuration supports higher feeds while preserving surface integrity and tool life. The result is a measurable improvement in machining efficiency without compromising finish quality. Rapid insert change and secure clamping for less downtime Designed for APKT 1604 indexable inserts, the tool features a robust fastening system using an M4x10 Torx screw secured with a T15 Torx key, ensuring precise and repeatable clamping torque at every change. The use of standardised indexable inserts allows quicker replacement compared with brazed or solid-carbide cutters, reducing machine idle time and simplifying logistics for spare parts. This approach supports lean workshop practices by making consumable handling straightforward and reliable, while the compatibility with major insert manufacturers such as Korloy broadens sourcing options. Compact shank and robust length for versatile mounting A 25 mm shank diameter combined with a 200 mm overall length offers a practical balance between rigidity and accessibility. The 55 mm cutting length permits deeper engagement when required, while the shorter effective overhang improves stability on milling spindles and reduces chatter. At 0.783 kg, the cutter is light enough for nimble tool changes yet substantial enough to resist deflection during interrupted cuts. These dimensional choices were made to enhance mounting flexibility in standard tool holders and to promote predictable machining behaviour across a range of production set-ups. Built for predictable performance and simple integration The cutter’s design concentrates on predictable results rather than on unnecessary complexity. By employing indexable inserts and a straightforward Torx clamping system, the S278TM reduces operator intervention and makes tool management easier for teams tasked with maintaining high machine availability. Technical features focus on long-term maintainability: the standard screw size and key type reduce the chance of incorrect tooling, and the compatibility with APKT 1604 inserts ensures an established supply chain for replacements. This pragmatic design philosophy supports stable production planning and lowers the risk of avoidable stoppages. For technical matching or to specify the Teknik Makina S278TM for a particular application, contact Metav Werkzeuge for tailored advice and reliable supply directly from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S278TM Manufacturer: Teknik Makina Brand: Teknik Makina Facts Diameter: 30 mm Shank diameter: 25 mm Cutting length: 55 mm Overall length: 200 mm Cutting edges: 3 Cutting angle: 90° Weight: 0.783 kg Torx screw: M4x10 Torx key: T15 Special features For APKT 1604 indexable inserts Compatible with Korloy inserts Three-flute cutter geometry Secure Torx clamping system FAQ Which insert type fits this cutter? The S278TM is designed specifically for APKT 1604 indexable inserts and accepts inserts with that designation. Is the cutter compatible with Korloy inserts? Yes, compatibility with Korloy is stated for the S278TM, enabling a wide choice of insert variants. What fastening hardware is used for the inserts? Insert clamping is achieved with an M4x10 Torx screw that is tightened using a T15 Torx key. What are the main dimensions to check for toolholder fitment? Key dimensions are a 25 mm shank diameter and a 200 mm overall length; the cutting diameter is 30 mm. How many cutting edges does the tool have and what is the cutting angle? The cutter has three cutting edges and a 90° cutting angle for stable face and peripheral engagement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com