Filterseite H1
300mm Thickness Caliper With Microcomputer, Colour 1.5" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of fast data export and assured traceability through an ISO 17025-calibrated workflow combined with a 1.5" colour touchscreen and Wireless + USB connectivity for uninterrupted production measurement. Order the thickness caliper directly via Metav Werkzeuge or ask our consultants if needed. Thickness Caliper by Microtech Metrology — Digital caliper with 1.5" colour touchscreen and Wireless + USB Thickness Caliper is a digitally equipped measuring tool for precise 2D thickness and profile checks across workshop and quality‑control processes, designed for standard workshop ranges up to 300 mm. ISO 17025-calibrated with certificate 1.5" colour touchscreen for clear readouts Wireless and USB data transfer options 0.03 mm accuracy for reliable repeatability Accurate measurement that fits the workshop routine The digital thickness gauge combines mechanical robustness with an integrated microcomputer to deliver repeatable thickness and 2D measurements across its X/Z range of 0–300 / 0–150 mm. The device’s rated accuracy of ±0.03 mm makes it suitable for general machine‑shop QC tasks where dependable tolerances are required. As a Standard class caliper, it balances reach and stiffness — the 300 mm maximum range covers the most common workshop needs while preserving good handling and one‑hand operation. The 1.5" colour touchscreen provides immediate numeric and graphical feedback, reducing interpretation errors and accelerating routine inspection cycles. Modern data flow for faster process control Connectivity is configured for contemporary production environments: Wireless transmission and USB output enable direct logging into SPC systems or temporary data capture without interrupting measurement throughput. The integrated microcomputer supports 2D measurement modes, so dimensional checks and thickness profiles can be recorded and exported with minimal manual transcription. This practical data handling reduces administrative time and supports faster decision‑making on the shopfloor, improving overall process efficiency and traceability. Calibrated readiness and documented traceability Delivered fully ISO 17025 calibrated, the instrument comes with a traceable calibration certificate, meeting the documentation requirements of quality departments and audits. This calibrated status removes the initial calibration step from procurement to operation, enabling immediate use in inspection routines and guaranteeing a known uncertainty that can be entered directly into quality records. The combination of certified calibration and digital data output simplifies compliance and supports reliable measurement history for batch reports. Designed for everyday robustness and usability Built as a digital caliper for routine industrial use, the construction favours durability and repeatable operation. The measurement system is optimised for thickness and profile inspection, and the touchscreen interface reduces menu complexity for repeat tasks. Wireless and USB options offer flexibility: local logging during benchwork, or networked transfer for centralised quality control. Combined, these features cut cycle time and increase measured parts throughput while maintaining consistent results. For procurement or technical advice on Microtech Metrology’s calibrated thickness caliper, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss delivery and integration into existing inspection routines Technical data Article number: 149020307 GTIN: 4061905045462 Manufacturer: Microtech Metrology Core specifications Measurement range X: 0–300 mm; Z: 0–150 mm Maximum range: 300 mm Accuracy: ±0.03 mm Display: 1.5" colour touchscreen Data output: Wireless, USB Digital: yes Special features Digital caliper with integrated microcomputer for 2D measurements ISO 17025 calibration with certificate included Wireless and USB connectivity Suitable for standard workshop and machine‑shop QC FAQ What measurement range does the caliper cover? The instrument’s measurement range is specified as X: 0–300 mm and Z: 0–150 mm, providing the standard workshop reach for most component thickness checks. Is the caliper supplied calibrated? Yes — the caliper is delivered fully calibrated according to ISO 17025 and includes a calibration certificate for immediate use in documented quality procedures. How is measurement data exported from the device? Measurement values can be transferred via Wireless connection or USB, enabling integration with statistical process control or simple data logging workflows. What accuracy can be expected in routine use? The device is specified with an accuracy of ±0.03 mm, suitable for general machine‑shop quality control tasks within the standard caliper category. Which applications suit this instrument best? The caliper is optimised for thickness and 2D profile measurements in manufacturing and inspection areas where the 300 mm range and 0.03 mm accuracy meet production tolerances. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500mm Thickness Caliper With Colour 1.5" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Benefit from high-resolution readout and factory traceability: the calliper combines a 0.001 mm reading resolution with a stated accuracy of 0.05 mm and wired/wireless data transfer to support efficient quality checks. Order the Thickness calliper directly via Metav Werkzeuge or ask our consultants if needed. Thickness calliper – Microtech Metrology; 500 mm medium-range with touchscreen The Thickness calliper is a digital measuring instrument for thickness and profile checks, designed for medium-range workshop and toolroom applications with clear touchscreen readout and flexible data export. Colour 1.5" touchscreen display Wireless and USB data output ISO 17025 calibration certificate included 500 mm medium-range for workshop use High-resolution readout that boosts throughput and confidence The instrument offers a 0.001 mm reading resolution combined with a specified accuracy of 0.05 mm, which allows for reliable pass/fail decisions during routine inspections. This combination delivers practical precision: the fine display resolution supports exact positioning and repeatable readings, while the declared accuracy defines the measurement uncertainty to be used in reports. For production control, the result is fewer re-measures and faster cycle times—thanks to the precise digital readout and stable mechanical guidance. The calibration status and traceability reduce uncertainty in acceptance criteria and support documented quality routines. Medium-range design for workshop versatility With a maximum measuring length of 500 mm, the device sits in the medium-range class that balances reach and stiffness for general machine‑shop tasks. This dimension is ideal for components such as housings, fixtures and medium-sized assemblies where single-hand operation and rigidity are required. The stroke layout X:0–500 and Z:0–150 mm enables direct thickness checks and limited profile measurements without switching instruments, reducing handling and the risk of measurement error. The instrument’s construction keeps deflection low across the working span, ensuring consistent results across the full measuring range. Modern display and flexible data transfer for smoother workflows The 1.5" touchscreen presents readings and menus clearly, while the combined Wireless and USB data outputs allow direct logging into inspection software or portable data collectors. This removes manual transcription, shortens reporting time and lowers the likelihood of clerical mistakes. The touchscreen simplifies unit selection and zeroing operations, which speeds up repeated measurement tasks on the shop floor. Where traceable records are required, wireless transfer or a USB export streamlines integration with statistical process control and quality documentation systems. Calibrated delivery and supplier reliability for audit-ready use The instrument is supplied fully calibrated to ISO 17025, and a calibration certificate is included with delivery to document traceability and conformity. Such factory calibration supports internal audits and simplifies initial deployment into inspection procedures. The product is manufactured by Microtech Metrology and is distributed through Metav Werkzeuge’s European supply network, which provides consistent availability and a practical quality filter at the Emmerich site. This combination of traceable calibration and dependable distribution minimises downtime and supports continuous quality assurance in production. Contact Metav Werkzeuge for tailored advice and to arrange purchase of the Microtech Metrology Thickness calliper calibrated to ISO 17025 and ready for immediate dispatch from Emmerich Technical data Article number: 149020507 GTIN: 4061905045875 Manufacturer: Microtech Metrology Digital: yes Display: Colour 1.5" touchscreen Data output: Wireless + USB Accuracy: 0.05 mm Reading resolution: 0.001 mm Measuring range: X: 0–500 mm / Z: 0–150 mm Calibration: ISO 17025 certificate included Numbers Accuracy: 0.05 mm Resolution: 0.001 mm Display size: 1.5 inches Measuring range (max): 500 mm Special features Medium-range calliper construction for reduced deflection 2D-capable thickness and profile checks Dual data interface: wireless and USB Supplied calibrated with certificate for traceability Manufacturer: Microtech Metrology FAQ What calibration documentation is supplied with the instrument? The Thickness calliper from Microtech Metrology is delivered fully calibrated to ISO 17025 and includes a calibration certificate documenting traceability. Which measurement range is covered by this calliper? The device covers a measuring range up to 500 mm (X: 0–500 mm; Z: 0–150 mm), making it suitable for medium-range workshop and toolroom tasks. How precise are the readings and what is the stated accuracy? Readings are displayed to 0.001 mm resolution, with a stated accuracy of 0.05 mm; use the accuracy value when assessing measurement uncertainty for quality documentation. How can measurement data be exported from the instrument? Data can be transferred either wirelessly or via USB, enabling direct logging to inspection software or portable data collectors without manual entry. Is this instrument suitable for integration into production quality control? Yes; the combination of precise readout, dual data output and ISO 17025 calibration makes the calliper appropriate for routine production control and traceable documentation (SKU 149020507). Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
MGMN 200-02 Indexable Insert for Cast Iron - MetavCUT
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Product specifications for MGMN 200-02 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: MGMN200-02-CastIron Facts for the tool: ISO-Code: MGMN200-02 Clearance Angle: 30° Angle: 86° Radius: 0.2 Features Material: cemented carbide Usage for: Cast steel without hole Form: rhombic Chip Breaker: without Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-MGMN-200-02-Cast Iron-MetavCUT 40END
VBGW 110306 CBN Indexable Insert for Stahl - MetavCUT
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Design details indexable inserts VBGW 110306 from MetavCUT Brand: MetavCUT Manufacturer Order Number: VBGW110306-CBN-Steel Figures for the tool: ISO-Code: VBGW110306 Clearance Angle: 5° Angle: 35° Thickness: 3,18mm Radius: 0.6 Features Material: CBN Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: without Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-VBGW-110306-Stahl-MetavCUT 40END
Textblock unten 1
aosihfopiafh ohfoiahf oeiwhfoajasölmc woijf ajfoiaj aoijfüoijf
Textblock unten 2
aspjfdoasjfpasjhfopi oiehfoiaesh aoseifhoasdnfopiaeshf shfosadj hhweofih oawef h