CNMG090308-MP3 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and an MP3 chipbreaker for reliable steel machining and reduced tool changes; order the CNMG090308-MP3 WPP10G turning insert directly via Metav Werkzeuge or ask the consultants for application-specific advice. CNMG090308-MP3 WPP10G turning insert — Tiger·tec Gold, for steel — Walter Tools The CNMG090308-MP3 WPP10G is a rhombic 80° negative‑rake indexable insert designed for efficient, high‑productivity turning of steels in ISO P applications. Tiger·tec Gold coating for extended tool life Optimised MP3 chipbreaker for steel applications Rhombus 80° form with 0.8 mm corner radius Negative 0° rake for stable cutting performance High productivity through advanced grade and coating The insert uses the WPP10G grade within the Tiger·tec Gold series, a coated carbide solution designed specifically for steel. This combination brings improved wear resistance and consistent edge stability, so production runs achieve predictable tool life and fewer interruptions. The grade is tuned to handle the typical heat and chip formation encountered when machining ISO P materials, which supports higher cutting speeds and reliable cycle times without sacrificing component quality. Predictable chip control and surface quality Equipped with the MP3 chipbreaker and a Rhombus 80° geometry, the insert promotes controlled chip formation and evacuation in a wide range of turning operations. The 0.8 mm corner radius increases edge strength and contributes to a stable contact zone, helping to maintain surface integrity during moderate to heavy cuts. With a negative 0° rake, the design favours durability and process security in applications where interrupted cuts or variable material batches occur. Easy integration and consistent process results The insert’s size 09 and 3 mm thickness follow common tooling standards, allowing straightforward interchange in compatible toolholders. Tolerance class M ensures manufacturing precision and repeatable positioning, which supports faster set‑ups and less rework. The overall specification aims to reduce total machining costs by extending effective cutting life and delivering consistent part quality, making it a pragmatic choice where throughput and reliability are priorities. Choose Walter Tools' Tiger·tec Gold grade for dependable steel turning — contact Metav Werkzeuge for application advice or to order the CNMG090308-MP3 WPP10G insert at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: CNMG090308-MP3-WPP10G-WALTER Designation: CNMG090308-MP3 WPP10G Manufacturer: Walter Tools Series: Tiger·tec Gold Execution: G Facts Corner radius: 0.8 mm Thickness: 3 mm Rake angle: 0° (negative) Insert size: 09 Tolerance class: M Special features Grade: WPP10G (coated carbide) Coating: Tiger·tec Gold Chipbreaker: MP3 Insert shape: Rhombus 80° Suitable for: Steel (ISO P) FAQ What materials is this insert best suited for? The CNMG090308-MP3 WPP10G insert is optimised for machining steels (ISO P), with the WPP10G grade and Tiger·tec Gold coating tuned to manage the heat and chip characteristics typical of these materials. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WPP10G grade enhances wear resistance and edge stability, which leads to longer usable tool life and steadier process windows when using the CNMG090308-MP3 WPP10G insert. How does the MP3 chipbreaker affect performance? The MP3 chipbreaker is engineered for effective chip formation and evacuation in steel turning, improving surface finish and reducing the risk of chip entanglement during continuous and interrupted cuts with this insert. What is the impact of the 0.8 mm corner radius? A 0.8 mm corner radius increases edge robustness and supports better finish on workpieces; in the CNMG090308-MP3 WPP10G it balances strength and surface quality for typical turning passes. Is this insert suitable for interrupted or heavy cuts? The combination of a negative 0° rake, robust corner radius and Tiger·tec Gold coating gives the CNMG090308-MP3 WPP10G the stability required for more demanding conditions, including moderate interrupted cuts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory‑new goods from the manufacturer.
CNMG090308-MP3 WPP20G G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Gold coating, MP3 chip control and a rhombic 80° geometry for consistent steel turning performance; order original Walter Tools inserts through Metav Werkzeuge or request application advice from our consultants. CNMG090308-MP3 WPP20G — Rhombic 80° indexable insert, Tiger·tec Gold, MP3 chipbreaker, Walter Tools The CNMG090308-MP3 WPP20G is a rhombic 80° turning indexable insert engineered for productive steel machining with the Tiger·tec Gold coated cutting grade. Tiger·tec Gold coating for durable edge Designed for steel (ISO group P) MP3 chipbreaker for reliable chip control Rhombic 80° with 0.8 mm corner radius Increased material removal and surface quality for steel parts The combination of the Tiger·tec Gold coating and the WPP20G cutting grade delivers a reliable tool life and reproducible results when machining steels. The coated carbide substrate reduces flank wear and improves thermal resistance, which translates into longer intervals between index changes and a steadier surface finish. Thanks to the MP3 chipbreaker, chips are formed consistently, which supports uninterrupted machining cycles and reduces secondary finishing time for turned components. Stable cutting action and process security through geometry and relief The rhombic 80° geometry with a 0° negative relief provides a robust cutting edge that resists shock and maintains form under interrupted cuts. The 0.8 mm corner radius contributes to stable edge strength and improved insert life in medium to heavy finishing operations. As a result, the insert supports predictable tool performance, making it suitable for serial production where repeatability and minimal setup adjustments are priorities. Practical selection and handling for workshop efficiency This indexable insert is coded for conventional CNMG toolholders and features a compact thickness class for secure clamping. The MP3 chipbreaker is optimised for chip control when turning unalloyed or alloyed steels (ISO group P), reducing risk of entanglement and improving swarf evacuation. For process planning, pairing the insert with an appropriate positive/negative holder and optimised cutting data increases material removal rates while maintaining surface integrity, supporting shorter cycle times and lower overall machining cost. Contact Metav Werkzeuge for tailored cutting data and to source original Walter Tools Tiger·tec Gold inserts for reliable steel turning applications Technical Data Article number: CNMG090308-MP3-WPP20G-WALTER Designation: CNMG090308-MP3 WPP20G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Execution: G Facts Corner radius: 0.8 mm Relief angle: 0° (negative) Plate form: Rhombus 80° Plate size: 09 Plate thickness: 03 Tolerance class: M Special features MP3 chipbreaker Coated carbide (Tiger·tec Gold) Suitable for steel (ISO group P) Robust cutting edge for stable operation FAQ What materials is this insert suitable for? The CNMG090308-MP3 WPP20G by Walter Tools is specified for machining steel (ISO group P), including unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the CNMG090308-MP3 WPP20G improves thermal resistance and reduces wear, leading to longer tool life and more consistent results in serial machining. What is the purpose of the MP3 chipbreaker? The MP3 chipbreaker on this indexable insert promotes predictable chip control, helping to prevent chip entanglement and easing swarf evacuation during turning. Which geometry features improve edge strength? The rhombic 80° shape combined with a 0.8 mm corner radius and 0° negative relief gives the insert a robust cutting edge, suitable for medium to heavy finishing operations. Is this insert compatible with standard CNMG toolholders? The CNMG090308-MP3 WPP20G follows the CNMG designation and is intended for holders designed for CNMG 09 inserts; verify holder clamping specifications before use. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is original, brand-new goods of the manufacturer.
CNMG090308-MP3 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, reliable chip control and an 80° rhombic geometry for steady steel turning performance; order the CNMG090308-MP3 WPP30G directly via Metav Werkzeuge or request tailored advice from our consultants. CNMG090308-MP3 WPP30G — Indexable turning insert for steel, Rhombic 80°, 0.8 mm by Walter Tools A CNMG090308-MP3 WPP30G indexable turning insert designed for steel machining, combining the Tiger·tec Gold coating with an MP3 chipbreaker to deliver consistent chip control and stable cutting performance in a wide range of turning operations. Tiger·tec Gold coated, high wear resistance WPP30G: optimised for steel machining MP3 chipbreaker for stable chip formation Rhombic 80° insert, 0.8 mm corner radius Boosted productivity through optimised cutting performance The combination of Tiger·tec Gold technology and the WPP30G grade provides a coated carbide substrate engineered for the thermal and mechanical demands of turning steel. This composition reduces flank wear and extends usable tool life, which in practice means fewer index changes and longer uninterrupted production runs. The insert’s robust build and coating strategy improve process stability, enabling higher sustained cutting parameters without premature degradation of the cutting edge. Reliable chip control for safer, uninterrupted turning The MP3 chipbreaker is tuned to promote uniform chip segmentation when machining carbon and alloy steels, reducing chip entanglement and the risk of workpiece damage. Stable chip formation improves operator safety and minimises secondary operations to clear chips. In addition, the Rhombic 80° geometry supports versatile approach angles for shoulder and general turning operations, translating machining stability into predictable surface finish and dimension control. Geometry and edge design that suit demanding applications A 0.8 mm corner radius provides a balance between edge strength and surface quality: it resists chipping in interrupted cuts while delivering acceptable roughness values for many finishing passes. The 0° negative rake characteristic favours heavy-duty cuts and helps maintain a robust cutting edge under variable feed conditions. Together these design choices make the insert particularly suited to medium-to-high depth cuts in unalloyed and alloyed steel grades where repeatable performance is required. Practical handling and tooling considerations The insert’s CNMG form factor is compatible with standard clamping systems and toolholders designed for rhombic inserts; this reduces changeover complexity and supports quick reconditioning in the shop. The coated grade is intended for conventional turning cycles rather than specialised high-speed alloy work; machinists will benefit from tuning feed and speed within recommended ranges to exploit the grade’s wear resistance while avoiding thermal overload. Adopting this insert supports a cost-effective balance between tool life and machining throughput. For high-throughput steel turning applications relying on Tiger·tec Gold technology, contact Metav Werkzeuge for product availability and application advice via info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge will recommend the suitable insert variants and supply options for immediate production integration. Technical data Article number: CNMG090308-MP3-WPP30G-WALTER Designation: CNMG090308-MP3 WPP30G Type: Indexable turning insert (drehwendeschneidplatte) Manufacturer: Walter Tools Numbers / Core technical data Insert size: 09 Thickness: 03 Corner radius: 0.8 mm Insert geometry: Rhombic 80° Rake angle: 0° (negative) Tolerance class: M Special features / Versions Series: Tiger·tec Gold Grade: WPP30G (coated carbide) Chipbreaker: MP3 Application group: P (steel) Execution: G FAQ How does the WPP30G grade perform on different types of steel? The WPP30G grade is formulated for a broad range of steel machining tasks, offering a combination of wear resistance and toughness that is suited to typical carbon and alloy steels encountered in general turning operations. What benefits does the MP3 chipbreaker provide during processing? The MP3 chipbreaker promotes controlled chip segmentation and stable evacuation, which reduces the likelihood of chip jamming and improves process reliability during continuous turning operations. Is the CNMG090308-MP3 compatible with standard CNMG toolholders? Yes, the CNMG form adheres to standard dimensions for rhombic inserts and will fit conventional CNMG toolholders when clamped according to the holder manufacturer’s specifications. Which cutting scenarios favour the 0.8 mm corner radius? A 0.8 mm corner radius is appropriate where a compromise between edge strength and surface finish is required—suitable for medium-depth cuts and occasional interrupted cuts without excessive risk of chipping. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory-new goods from the manufacturer (Walter Tools).
CNMG120402-FM5 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, robust FM5 chip control and a compact 80° rhombic form to secure reliable machining of stainless steel and heat‑resistant alloys; order the insert through Metav Werkzeuge or request application advice from our consultants. CNMG120402-FM5 WSM10S turning insert by Walter Tools — Tiger·tec Silver, 0° negative rake A compact CNMG120402-FM5 WSM10S turning insert engineered for stable cutting in stainless steel and superalloys, featuring an 80° rhombic form and FM5 chipbreaker for predictable chip control Tiger·tec Silver coating for heat resistance FM5 chipbreaker for stable chips Rhombic 80° form, 0.2 mm nose radius Suited for stainless steel and superalloys Proven cutting performance in demanding materials The WSM10S grade, based on the Tiger·tec Silver coating technology, is formulated for high thermal load resistance and abrasion control when machining challenging materials. This specification delivers stable chip formation and reduced risk of built‑up edge during interrupted or heavy cuts. For operations where heat dissipation and edge security are critical, the coated carbide substrate ensures consistent cutting behaviour, which in turn supports predictable tool life and process reliability. Geometry and edge stability for reproducible results The insert’s rhombic 80° geometry combined with a 0° negative rake and a 0.2 mm nose radius offers a robust seating for the cutting edge, improving load distribution and minimising chipping under heavy engagement. The FM5 chipbreaker is optimised to break and evacuate chips effectively in medium to heavy cutting conditions, helping to protect the cutting edge and enhance surface finish. These design choices translate into fewer tool changes and more stable cycle times on production machines. Application benefits and economic impact Designed for stainless steel (ISO group M) and materials in the S group (heat‑resistant superalloys and titanium), this insert supports machining strategies that demand repeatable performance under thermal stress. The combination of coating and geometry reduces the likelihood of unplanned downtime and contributes to an improved cost‑per‑part through extended edge life and consistent quality. Specifications such as the compact plate size and standard ISO designation simplify tooling selection and integration into existing toolholders and process setups. Contact Metav Werkzeuge for tailored cutting data, toolholder options and application consulting for Walter Tools inserts and machining of stainless steel and superalloys Technical data Article number: CNMG120402-FM5-WSM10S-WALTER Item: Drehwendeschneidplatte CNMG120402-FM5 WSM10S Walter Tools Type: Turning insert (indexable) Facts Insert size: 12 Thickness code: 04 Nose radius: 0,2 Free angle: 0° (negativ) Grade/Sort: WSM10S Special features Series: Tiger-tec Silver Chipbreaker: FM5 Shape: Rhombus 80° Applicable materials: stainless steel (M), superalloys/titan (S) Coating: coated carbide (WSM10S) FAQ What materials is this insert best suited for? The CNMG120402-FM5 WSM10S insert is optimised for stainless steel (ISO group M) and also performs well on heat‑resistant superalloys and titanium (ISO group S) thanks to the Tiger·tec Silver coating and FM5 chipbreaker. How does the FM5 chipbreaker benefit production? The FM5 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation, which reduces the risk of chip entanglement, protects the cutting edge and supports longer uninterrupted runs. Is the geometry suitable for heavy interrupted cuts? Yes; the 80° rhombic form, 0° negative rake and 0.2 mm nose radius provide enhanced edge support and load distribution, making the insert resilient in heavier or intermittent cutting conditions. Can this insert be used in standard toolholders? The CNMG ISO designation and compact form factor make it compatible with common toolholders designed for CNMG inserts; ensure correct clamping and seat condition for optimal performance. What process improvements can be expected when switching to this grade? Switching to the WSM10S grade can improve edge stability and thermal resistance, often resulting in more consistent surface finish and fewer tool interventions, thereby improving overall productivity. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG120402-FM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of a high-performance combination of Tiger·tec Silver coating and the WSM20S grade for secure chip control and sustained edge stability when machining stainless steels and heat-resistant superalloys; order the insert via Metav Werkzeuge or contact our technical advisors for tailored application advice. CNMG120402-FM5 WSM20S indexable turning insert — Tiger·tec Silver, Rhombus 80° (Walter Tools) The CNMG120402-FM5 WSM20S is an indexable turning insert engineered for reliable chip formation and robust cutting under the thermal and mechanical demands of stainless steels and heat-resistant superalloys. Tiger·tec Silver coated carbide Optimised for stainless steels and superalloys Rhombic 80° geometry for versatile turning FM5 chipbreaker for stable chip control Longer tool life through thermal-resistant coating The applied Tiger·tec Silver technology and the WSM20S grade form a coating/substrate combination that improves wear resistance and reduces flank wear in difficult-to-cut materials. This coated carbide construction is designed to withstand elevated cutting temperatures typical when machining stainless steels and superalloys, so the result is a consistently longer tool life and fewer indexings per workpiece. For industrial production this means reduced tool-change downtime and improved process economy. Predictable chip control and improved surface quality The FM5 chipbreaker is specifically shaped to produce short, manageable chips and to promote a steady material flow away from the cutting zone. Combined with the 0.2 mm corner radius, this geometry supports a fine finish on the workpiece while avoiding unwanted build-up on the edge. The outcome is not only more consistent surface quality but also fewer workpiece rejections — a direct contribution to higher productivity and lower follow-up costs. Robust geometry for demanding operations The Rhombus 80° insert form and 0° negative relief provide a mechanically strong cutting edge that tolerates interrupted cuts and variable engagement angles. This negative-rake arrangement increases edge stability and reduces chipping under shock loads, offering dependable performance in heavy roughing as well as finishing passes. The insert thickness and tolerance class ensure repeatable seating in standard indexable toolholders for a secure clamping interface. Application-focused versatility and process security Specified for the ISO groups M (stainless steels) and S (heat-resistant superalloys and titanium), the insert supports a broad material spectrum encountered in aerospace, energy and demanding general engineering tasks. The grade’s composition and the chipbreaker design together enhance process security by promoting stable cut conditions and reliable chip evacuation, which helps maintain consistent cycle times and repeatable part quality across batches. Discuss the Walter Tools CNMG120402-FM5 WSM20S insert with Metav Werkzeuge to evaluate the best grade and cutting data for the intended stainless steel or superalloy application and to optimise tool life and productivity. Technical data SKU: CNMG120402-FM5-WSM20S-WALTER Product type: indexable turning insert Designation: CNMG120402-FM5 WSM20S Brand: Walter Tools Core specifications Insert shape: Rhombus 80° Corner radius: 0.2 mm Relief angle: 0° (negative) Thickness: 04 Grade: WSM20S Chipbreaker: FM5 Tolerance class: M Designs and special features Coating/series: Tiger·tec Silver Coated carbide cutting material Application groups: M (stainless steels), S (superalloys/titanium) Robust geometry for interrupted cuts Optimised for secure chip formation and surface finish FAQ What materials is this insert suited for? The CNMG120402-FM5 WSM20S insert is specified for stainless steels (ISO group M) and heat-resistant superalloys/titanium (ISO group S), reflecting the WSM20S grade and Tiger·tec Silver coating. How does the FM5 chipbreaker help in machining? The FM5 chipbreaker on the CNMG120402-FM5 promotes short, controllable chips and steady chip flow, reducing the risk of entanglement and improving consistency of surface finish. Is the 0° relief suitable for interrupted cuts? Yes; the 0° (negative) relief increases edge robustness, making the insert appropriate for interrupted cutting and operations with variable engagement. Which toolholders are compatible with this CNMG insert? The CNMG geometry is compatible with standard CNMG-compatible turning toolholders; ensure correct seat and clamping per the toolholder manufacturer's guidance when using the CNMG120402-FM5 WSM20S. What finish quality can be expected with a 0.2 mm corner radius? A 0.2 mm corner radius supports fine finishing passes by reducing micro-chatter while maintaining a sharp cutting edge; it balances surface quality with edge strength for consistent results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CNMG120402-FP5 WEP10C WEP10C Wendeplatten - Walter Tools
A high‑precision cermet insert with a FP5 chipbreaker and a Rhombus 80° form delivers consistent finishing and repeatable edge life for demanding turning tasks; order the CNMG120402-FP5 WEP10C directly via Metav Werkzeuge or consult our specialists for application recommendations. CNMG120402-FP5 WEP10C — Turning insert, Rhombus 80°, 0° negative — Walter Tools The CNMG120402-FP5 WEP10C is a cermet turning insert designed for precision finishing and controlled chip formation in medium‑duty turning operations Walter Cermet grade WEP10C FP5 chipbreaker for controlled chip formation Rhombus 80° insert geometry 0° negative rake with 0.2 mm corner radius Predictable finishing and edge performance The cermet composition of this insert, specified as WEP10C, is engineered for stable cutting edges and improved surface quality during finishing cycles. Combined with the FP5 chipbreaker, the geometry promotes regular chip segmentation and reduces the risk of long, stringy chips that compromise surface integrity. Thanks to tolerance class M, the insert offers consistent fit and repeatability in standard toolholders, which supports process stability across production runs. For definitive material recommendations, the product matrix should be consulted before application. Geometry tailored for secure engagement and fine contours The Rhombus 80° form delivers a compact seating area with access to tight internal profiles while keeping a robust cutting edge. The 0° negative rake increases edge strength and reduces the tendency for edge chipping under intermittent loads, making the geometry suitable where a balance of accessibility and durability is needed. A 0.2 mm corner radius provides a controlled cutting radius for fine turning and helps maintain surface finish without excessive tool pressure. Plate size 12 and thickness 04 ensure compatibility with commonly used CNMG toolholders for finishing operations. Integration into productive machining setups As part of the Walter Cermet series, this insert supports consistent batch processing where predictable edge life and surface finish matter. The CNMG120402-FP5 WEP10C is produced to catalog specifications; material details are catalogue dependent and should be checked against the workpiece requirements. The combination of grade, chipbreaker and geometry is oriented towards finishing and semi‑finishing strategies where controlled chip flow and repeatability translate directly into fewer tool changes and steadier part quality. For specific cutting data and recommended operating windows, refer to the technical sheet or the product matrix. For tailored machining advice on using genuine Walter Tools inserts such as the CNMG120402-FP5 WEP10C and to confirm suitability for a given material or turning strategy, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CNMG120402-FP5-WEP10C-WALTER Designation: CNMG120402-FP5 WEP10C Manufacturer: Walter Tools Series: Walter Cermet Product type: Turning insert (Drehwendeschneidplatte) Core specifications Plate size: 12 Thickness: 04 Corner radius: 0.2 Relief angle: 0° negative Tolerance class: M Execution: G Features and materials Chipbreaker: FP5 Insert shape: Rhombus 80° Grade: WEP10C (cermet) Material: catalogue dependent Series notes: Walter Cermet FAQ What is the main application for this insert? The CNMG120402-FP5 WEP10C is intended primarily for precision finishing and semi‑finishing turning tasks where cermet grades and a controlled chipflow are required. How does the FP5 chipbreaker affect chip behaviour? The FP5 chipbreaker promotes segmented, controllable chips that aid consistent surface quality and reduce interruptions caused by long, stringy chips during turning operations. What advantage does a 0° negative rake provide? A 0° negative rake increases edge stability and robustness, improving resistance to edge chipping under interrupted cuts or tougher cutting conditions. What does tolerance class M indicate for workshop use? Tolerance class M denotes standardised dimensional tolerance for the insert, supporting interchangeability and repeatability when mounted in compatible toolholders. How is the insert specified in ISO terms? The ISO designation is CNMG120402-FP5 WEP10C, reflecting the insert shape, size, chipbreaker and the cermet grade. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used only for explanation. There is no affiliation between Metav Werkzeuge and the named manufacturers. The offered article is an original, factory‑new product of the manufacturer.
CNMG120404-FM5 WMP20G WMP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, a proven WMP20G grade and the FM5 chipbreaker for secure chip formation and prolonged edge life; order the CNMG120404-FM5 WMP20G indexable insert directly via Metav Werkzeuge or contact our consultants for application advice. CNMG120404-FM5 CNMG120404-FM5 WMP20G indexable insert — for stainless steels | Walter Tools CNMG120404-FM5 WMP20G is a rhombic 80° turning insert designed for machining stainless steels in medium to robust conditions Tiger·tec Gold coating for long tool life Optimised chip control FM5 chipbreaker Rhombic 80° form with 0.4 mm nose radius Suited for stainless steels (ISO M) High-performance cutting for stainless steels The insert is engineered to deliver stable performance when machining stainless steels, where material toughness and heat generation demand robust solutions. The combination of the WMP20G carbide grade and Tiger·tec Gold coating provides improved wear resistance and heat protection, reducing the risk of edge build-up and premature failure. With its negative rake and consistent substrate quality, the geometry permits reliable cutting in interrupted cuts and higher feed conditions, supporting a steady production flow and predictable tool life. Precise chip control and consistent surface quality An optimised FM5 chipbreaker promotes controlled chip formation and evacuation, which reduces built-up edge and improves surface finish on challenging alloys. The insert’s chip control characteristics lower the likelihood of entanglement and tool-induced marking, enabling more consistent part quality and fewer rework cycles. This results in measurable gains in process stability and reduces downtime caused by frequent insert changes or manual chip handling. Geometry that supports repeatability and versatile setups The rhombic 80° form with a 0.4 mm nose radius and 0° negative rake offers a balance between strength and precision. The robust cutting edge tolerates heavier cuts while the compact nose radius assists in achieving defined part contours. The standardised ISO-style designation simplifies toolholder selection and repeatable indexation, making fixture changes and tool requalification faster and more reliable across batch runs. Economic benefits through longer service intervals By combining a wear-resistant WMP20G grade with a high-performance coating, the insert extends the time between indexings and replacements. Fewer interruptions for tool changes translate into higher machine uptime and lower tooling consumption per part. For production environments where predictability and throughput matter, the improved life expectancy contributes directly to reduced unit costs and a more efficient machining schedule. Contact Metav Werkzeuge for tailored recommendations on the Walter Tools CNMG120404-FM5 WMP20G insert, supply options and application support — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data SKU: CNMG120404-FM5-WMP20G-WALTER Designation: CNMG120404-FM5 WMP20G Manufacturer: Walter Tools Facts Size: 12 Thickness: 04 Corner radius: 0.4 mm Rake angle: 0° (negative) Chipbreaker: FM5 Materials & Features Grade: WMP20G Coating: Tiger·tec Gold Form: Rhombic 80° Application: stainless steels (ISO M) Series: Tiger-tec Gold Plate type: indexable turning insert FAQ What materials is this insert suitable for? The CNMG120404-FM5 WMP20G insert is designed primarily for stainless steels (ISO M) and performs well under medium to robust machining conditions. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WMP20G grade increases heat resistance and reduces wear, helping the insert maintain a stable cutting edge and extend service life during operations on tough alloys. What is the purpose of the FM5 chipbreaker? The FM5 chipbreaker promotes controlled chip formation and evacuation, improving process reliability and surface finish while reducing the risk of built-up edge on stainless materials. Can the insert be used in interrupted cuts or heavy feeds? Yes — the rhombic 80° geometry and 0.4 mm corner radius, combined with a negative rake, provide robustness suitable for interrupted cuts and heavier feed applications. How is the insert referenced for toolholder selection? Use the ISO-style designation CNMG120404-FM5 WMP20G to identify compatible toolholders and indexation requirements for consistent setup and repeatability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
CNMG120404-FM5 WMP20S FM5 Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver performance, the robust WMP20S grade and a precise 0.4 mm corner radius for dependable machining of stainless steel; order the CNMG120404-FM5 WMP20S through Metav Werkzeuge or consult our advisors for application support. CNMG120404-FM5 WMP20S turning indexable insert — Tiger·tec Silver grade for stainless steel | Walter Tools CNMG120404-FM5 WMP20S is an indexable turning insert engineered for reliable, repeatable performance when machining stainless steel under medium to robust cutting conditions Tiger·tec Silver coated carbide grade WMP20S optimised for stainless steel Rhombic 80° insert geometry FM5 chipbreaker for stable chips Consistent performance on stainless steel The CNMG120404-FM5 WMP20S combines a coated carbide substrate with the Tiger·tec Silver technology to address the specific challenges of machining stainless steel. The tailored WMP20S grade promotes controlled chip formation and a stable cutting edge where heat and stickiness commonly occur. For production environments that demand predictable tool life and fewer interruptions, this insert reduces the risk of build‑up edge and supports higher process stability, translating into fewer reworked parts and improved overall equipment effectiveness. Geometry and chip control that support productivity The rhombic 80° geometry together with the FM5 chipbreaker delivers consistent chip segmentation and evacuation, particularly important when turning ductile stainless alloys. The negative rake of 0° (negative) and the 0.4 mm corner radius balance strength at the cutting edge with the need for a defined contact zone, which helps maintain surface finish and dimensional stability. These design choices enable efficient material removal while lowering the likelihood of unexpected edge failure during intermittent or continuous cuts. Designed for industrial repeatability and process security As part of the Tiger·tec Silver series, this insert emphasises process security and reproducible results across batches. The WMP20S grade has been developed for the specific demands of stainless steel, offering a compromise between toughness and hot‑hardness that supports long runtimes and predictable change intervals. In practice, this means less unplanned downtime and more consistent part quality — advantages that directly affect manufacturing throughput and cost‑of‑ownership calculations. Practical application notes and integration The insert is suitable for use in standard CNMG toolholders and is intended for turning operations where secure chip control and robust edge life are priorities. For stainless steel, consider stable clamping, appropriate feed rates and reliable coolant or lubrication strategies to complement the insert’s performance. The FM5 chipbreaker is particularly effective when paired with moderate to higher feeds at controlled cutting speeds, helping to maintain short, manageable chips and reduce operator intervention. Contact Metav Werkzeuge today for tailored application advice on the CNMG120404-FM5 WMP20S and to arrange procurement or technical queries via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CNMG120404-FM5-WMP20S-WALTER Designation: CNMG120404-FM5 WMP20S Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Insert size: 12 mm Thickness: 4 mm Corner radius: 0.4 mm Insert shape: Rhombic 80° Rake angle: 0° (negative) Tolerance class: M Special features Grade: WMP20S (coated carbide) Chipbreaker: FM5 Suited material group: stainless steel Execution: G Industrial focus: medium to robust cutting conditions FAQ Is this insert suitable for machining stainless steels? The CNMG120404-FM5 WMP20S from Walter Tools is specifically designed for stainless steel and provides optimised chip control and edge stability for such materials. What does the FM5 chipbreaker deliver in practice? The FM5 chipbreaker on the CNMG120404-FM5 WMP20S promotes consistent chip segmentation, reducing long, entangling chips and aiding safe chip evacuation during turning of stainless steel. Which toolholders accept this insert form? The rhombic 80° CNMG geometry fits standard CNMG toolholders; compatibility with specific tool bodies should be confirmed for the intended clamping system before commissioning. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius increases edge strength for interrupted or robust cuts while still allowing a good surface finish when combined with the appropriate cutting parameters for stainless steel. What advantages does the Tiger·tec Silver series provide? Tiger·tec Silver technology, implemented in the WMP20S grade, enhances heat and wear resistance for coated carbide applications, delivering improved process stability and longer tool life in stainless steel turning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned exclusively for explanation; there is no connection between our company and these brands. The offered article is original, factory‑new merchandise of the manufacturer.
CNMG120404-FM5 WSM01 WSM01 Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Silver coating, the WSM01 grade and the FM5 chipbreaker for reliable machining of stainless steel and high‑temperature alloys; improved tool life and stable chip control support consistent production. Order the insert directly via Metav Werkzeuge or consult our specialists for application optimisation. CNMG120404-FM5 WSM01 indexable turning insert – Tiger‑tec Silver for stainless steel and superalloys by Walter Tools A CNMG120404-FM5 WSM01 indexable turning insert engineered to deliver stable cutting performance in stainless steel and heat‑resistant superalloys, combining a robust coated grade with a secure chipbreaker geometry Tiger‑tec Silver coating for heat resistance WSM01 grade for stainless steel and superalloys FM5 chipbreaker for secure chip control Rhombic 80° form with 0.4 mm corner radius Consistent performance in demanding materials The combination of the Tiger‑tec Silver coating and the WSM01 carbide grade ensures resistance to thermal and mechanical wear when turning stainless steel and heat‑resistant alloys. The coated hardmetal composition is optimised for poor heat conduction and tendency to form built‑up edge; this results in a more reliable cutting edge and longer uninterrupted tool life. For production environments where component consistency and predictable tool change intervals matter, this configuration reduces the risk of premature edge failure and supports stable cycle times. Secure chip control for higher throughput Designed with the FM5 chipbreaker and a 0.4 mm corner radius, the insert promotes controlled chip formation and evacuation under tough cutting conditions. The rhombic 80° form gives reliable side clearance and good access to both external and light profiling operations, while the negative 0° clearance provides strength at the cutting edge for interrupted cuts. In practice, better chip control reduces downtime, protects the workpiece surface and improves machine utilisation — tangible gains for process efficiency and cost per part. Practical advantages and machining guidance The insert’s format and geometry make it suitable for a range of turning tasks in automotive, aerospace and energy sectors where durability and repeatability are required. The moderate corner radius and the insert thickness promote a balance between edge robustness and surface finish; the coated grade helps manage heat at higher cutting speeds. When selecting cutting parameters, start with conservative feeds and speeds for stainless steel and increase progressively while monitoring surface integrity and tool wear to find the most economical operating point. For machining problems in stainless steel or superalloys, request tailored advice from Metav Werkzeuge — our team will recommend the optimal Walter Tools Tiger‑tec Silver inserts and cutting data to match the specific application. Technical data Article number: CNMG120404-FM5-WSM01-WALTER Designation: CNMG120404-FM5 Series: Tiger‑tec Silver Grade: WSM01 Chipbreaker: FM5 Manufacturer: Walter Tools Facts Insert size: 12 Thickness: 04 Clearance angle: 0° (negative) Corner radius: 0.4 mm Form: Rhombic 80° Tolerance class: M Special features Coating: Tiger‑tec Silver Material suitability: S / M Suitable for stainless steel Application: Turning, interrupted cuts, high temperature alloys FAQ What materials is this insert suitable for? The CNMG120404-FM5 WSM01 from Walter Tools is intended for stainless steel and heat‑resistant superalloys (S / M), offering thermal stability and effective edge retention in these groups. Which chipbreaker and geometry are used? This insert uses the FM5 chipbreaker with a rhombic 80° shape and a 0.4 mm corner radius to promote secure chip control and robust cutting performance. Is the insert coated and what benefit does the coating provide? The Tiger‑tec Silver coating on the CNMG120404-FM5 WSM01 enhances heat resistance and reduces flank wear, improving tool life under elevated cutting temperatures. Can this insert handle interrupted cuts? Yes, the negative 0° clearance and the sturdy grade design of this Walter Tools turning insert support interrupted cuts and applications with varying engagement. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanatory purposes only and imply no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is original factory‑new goods of the manufacturer Walter Tools.
CNMG120404-FM5 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of a high‑performance coated carbide grade combined with a controlled FM5 chipbreaker and robust rhombic geometry for consistent productivity in demanding turning operations; order directly via Metav Werkzeuge or consult our specialists for application advice. CNMG120404-FM5 WSM10S indexable turning insert, Tiger‑tec Silver — for stainless steels and heat‑resistant superalloys | Walter Tools The CNMG120404-FM5 WSM10S is a rhombic 80° indexable turning insert engineered for secure chip formation and reliable performance when machining stainless steels and heat‑resistant superalloys. Tiger‑tec Silver coated carbide grade WSM10S Rhombic 80° geometry, 0.4 mm corner radius FM5 chipbreaker for secure chip control Negative rake 0° for heavy interrupted machining Consistent machining of hard‑to‑cut alloys for improved throughput The coated carbide WSM10S grade from the Tiger‑tec Silver family is formulated to support machining of stainless steels and heat‑resistant superalloys with improved edge stability. This composition reduces the tendency for built‑up edge and helps maintain cutting performance over longer tool life. As a result, shorter interruption times and fewer insert changes translate into a more predictable production rhythm and better utilisation of machine time. Stable cutting edge and surface quality under demanding conditions The rhombic 80° shape combined with a 0.4 mm corner radius delivers a favourable balance between robustness and finish. The geometry supports repeatable dimensional accuracy and a consistent surface texture in serial production. Where interrupted cuts or variable engagement occur, the negative relief of 0° increases edge strength, reducing the risk of chipping and maintaining component quality across batches. Precise chip control and thermal resilience for safer processes Equipped with an engineered FM5 chipbreaker and the high‑performance coating, the insert promotes controlled chip formation and evacuation even in sticky or gummy materials. Improved chip control lowers the risk of entanglement and contributes to safer machining conditions. Enhanced thermal stability from the coating also supports higher cutting parameters without compromising edge integrity, enabling efficient material removal rates. Designed for integration into robust production routines The insert’s standard CNMG format and the coated carbide concept make it suitable for automated and semi‑automated manufacturing cells, where repeatability matters. The combination of geometry, grade and chip‑forming features supports consistent results across shifts and operators, helping to reduce rework and increase first‑pass yield. For engineering teams seeking dependable inserts for demanding alloys, this solution offers a practical mix of longevity and performance. Contact Metav Werkzeuge for specialist application support and to discuss Walter Tools Tiger‑tec Silver inserts tailored to specific stainless steel and superalloy tasks — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CNMG120404-FM5-WSM10S-WALTER Designation: CNMG120404-FM5 WSM10S Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Inscribed circle: 12 Corner radius: 0.4 mm Thickness: 04 Relief angle: 0° (negative) Tolerance class: M Grade: WSM10S Special features Coating: Tiger‑tec Silver Chipbreaker: FM5 Geometry: Rhombic 80° Material groups: S / M (heat‑resistant superalloys, titanium; stainless steels) Application focus: heavy‑duty and difficult‑to‑cut materials FAQ Which materials are best suited to this insert? The CNMG120404-FM5 WSM10S insert is optimised for stainless steels and heat‑resistant superalloys (ISO groups M and S), offering improved edge stability when machining these challenging materials. What does the FM5 chipbreaker achieve in practice? The FM5 chipbreaker on this Walter Tools insert creates short, manageable chips and supports reliable evacuation, enhancing process safety and reducing the likelihood of chip‑related interruptions. Is the geometry suitable for interrupted cuts? Yes. The combination of rhombic 80° geometry and a negative relief angle of 0° provides increased edge strength, making the insert resilient under interrupted or irregular cutting conditions. How does the Tiger‑tec Silver coating benefit operation? The Tiger‑tec Silver coating on the WSM10S grade improves thermal resistance and wear behaviour, allowing for more stable cutting parameters and extended edge life in demanding applications. Can this insert be used in series production with automated machines? The standard CNMG format and the robust grade of the insert make it well suited for automated and high‑volume environments where repeatability and tool life are priorities. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
CNMG120404-FM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and a robust FM5 chipbreaker for dependable machining of stainless steels and heat-resistant alloys; benefit from the CNMG120404-FM5 WSM20S insert's stable cutting edge and simple tool management — order directly via Metav Werkzeuge or consult the experts for application matching. CNMG120404-FM5 WSM20S turning indexable insert by Walter Tools — Tiger·tec Silver coated, FM5 chipbreaker A CNMG120404-FM5 WSM20S turning insert designed for secure chip control and edge stability when machining stainless steels and high-temperature alloys, suited to a wide range of turning applications Tiger·tec Silver coated carbide grade WSM20S FM5 chipbreaker for controlled chip formation Rhombic 80° geometry for versatile turning Consistent performance for challenging materials The combination of a Tiger·tec Silver coating and the WSM20S grade provides a balanced response to the demands of stainless steels and heat-resistant superalloys. The coating increases thermal resistance while the substrate supports a stable cutting edge, which results in more predictable tool life under difficult cutting conditions. For production environments this means fewer unscheduled insert changes and a steadier process, contributing directly to improved throughput and lower overall tooling costs. The rhombic 80° geometry further ensures flexibility across finishing and medium-turning operations without sacrificing edge strength. Better chip control and edge security improve cycle times The FM5 chipbreaker is engineered to produce short, manageable chips even when cutting ductile or gummy materials. Controlled chip formation reduces rework, minimises toolholder interference and enhances operator safety at the machine. The 0° negative relief promotes robust support of the cutting edge, making the insert particularly reliable during interrupted cuts and under heavy load. These technical characteristics translate into a practical advantage on the shop floor: fewer stoppages for chip-related faults and a more stable surface quality on the workpiece. Practical benefits for tool management and process reliability With a 0.4 mm corner radius and a standard CNMG profile, the insert integrates into common tooling systems while offering predictable results in repetitive production runs. The tolerance class M underlines consistent dimensional accuracy, which simplifies indexable insert replacements and reduces set-up time. The coated carbide grade supports a broad material coverage (ISO groups M and S) so that one insert type can serve multiple applications, improving inventory efficiency and purchasing simplicity for manufacturing operations. Contact Metav Werkzeuge today for tailored cutting data and order support — Metav Werkzeuge can advise on holder compatibility and process parameters to get the best results from this Walter Tools insert Technical Data Article number: CNMG120404-FM5-WSM20S-WALTER Designation: CNMG120404-FM5 WSM20S Brand: Walter Tools Facts Insert size: 12 Plate thickness: 04 Corner radius: 0.4 mm Relief angle: 0° (negative) Geometry: Rhombus 80° Special features Chipbreaker: FM5 Grade: WSM20S (Tiger·tec Silver) Coating technology: Tiger·tec Silver Suitable for: stainless steels and superalloys Tolerance class: M FAQ Is this insert suitable for stainless steels and high-temperature alloys? Yes. The CNMG120404-FM5 WSM20S insert features the Tiger·tec Silver grade designed specifically for stainless steels (ISO group M) and heat-resistant superalloys (ISO group S), providing thermal resistance and stable cutting edges. What does the FM5 chipbreaker deliver in practice? The FM5 chipbreaker on this Walter Tools insert produces short, controllable chips and supports reliable chip evacuation, which reduces machine downtime and improves surface finish consistency. Can the insert handle interrupted cuts and heavier feeds? The negative relief angle and the robust edge support of the CNMG120404-FM5 make the insert well suited to interrupted cuts and demanding operations where edge stability is essential. How does the Tiger·tec Silver coating affect tool life? Tiger·tec Silver increases heat and wear resistance of the coating system, helping to maintain a sharper edge for longer periods during the machining of tough-to-cut materials, thus enhancing overall productivity. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
CNMG120404-FP5 WEP10C WEP10C Wendeplatten - Walter Tools
Combining a durable cermet grade with a precise FP5 chipbreaker and a compact rhombic 80° geometry delivers stable chip control and consistent finishing results; order the CNMG120404-FP5 WEP10C directly via Metav Werkzeuge or contact our advisers for application guidance. CNMG120404-FP5 WEP10C turning indexable insert — FP5 chipbreaker, rhombic 80° by Walter Tools CNMG120404-FP5 WEP10C is a rhombic 80° turning indexable insert designed for finishing and semi-finishing applications where controlled chips and repeatable surface quality are required Cermet grade WEP10C for finishing FP5 chipbreaker for stable chip control Rhombic 80° geometry for universal turning 0.4 mm corner radius for fine surface finish High-performance finishing with cermet technology The CNMG120404-FP5 WEP10C insert pairs cermet cutting-material properties with a dedicated FP5 chipbreaker to achieve reproducible surface quality in finishing operations. The cermet substrate combines ceramic hardness with metallic toughness, which helps to maintain a sharp cutting edge at finishing speeds and reduces built-up edge formation. For production planners, this means a lower scrap rate and more consistent part inspection results when the insert is used in appropriate operations and feeds. Controlled chip formation and improved process security A key advantage of the design is the FP5 chip control geometry, which promotes short, manageable chips under suitable cutting conditions and coolant strategies. The rhombic 80° shape plus negative 0° relief ensure secure clamping in standard toolholders while enabling predictable cutting forces. Where operators are unfamiliar with cermet behaviour, it is important to check the manufacturer's product matrix for optimal cutting data; the insert is best applied in finishing to semi-finishing cuts to exploit the grade's strength. Economical tool life and predictable surface results With a 0.4 mm corner radius and the Walter Cermet series characteristics, the insert is tuned for fine finishing and repeatable results across batches. The stable edge retention of the cermet grade supports longer intervals between indexings compared with some conventional grades, contributing to lower part-cost and reduced machine downtime. Integration into existing turning systems is straightforward thanks to the standard CNMG form factor and clear ISO designation, assisting planning for tool change intervals and stock management. Arrange an application consultation with Metav Werkzeuge to specify the CNMG120404-FP5 WEP10C for your turning process and to obtain tailored cutting-data recommendations; contact Metav Werkzeuge for immediate technical support. Technical data Article number: CNMG120404-FP5-WEP10C-WALTER Label: Drehwendeschneidplatte CNMG120404-FP5 WEP10C Walter Tools Product type: Turning indexable insert Series: Walter Cermet Sort: WEP10C Facts Insert size: 12 Thickness: 04 Corner radius: 0.4 Relief angle: 0° (negative) Shape: Rhombus 80° Tolerance class: M Special features Chipbreaker: FP5 Execution: G Basic designation: CNMG120404-FP5 Material info: catalogue-dependent Series notes: WEP10C is a Walter cermet grade; verify material suitability via product matrix FAQ What materials is this insert suitable for? The CNMG120404-FP5 WEP10C is a cermet-based insert optimised for finishing and semi-finishing; exact material suitability depends on the manufacturer's product matrix, so check the cutting-data table for the intended workpiece material. What are the benefits of the WEP10C cermet grade? WEP10C combines high hardness for wear resistance with metallic toughness for edge stability, delivering improved surface finish and predictable edge life in finishing operations compared with some carbide grades. How does the FP5 chipbreaker affect machining? The FP5 chipbreaker produces controlled, short chips under appropriate feeds and speeds, reducing chip entanglement and improving process security during continuous turning operations. Can this insert be used in standard CNMG toolholders? Yes; the insert follows the CNMG ISO form factor and fits standard CNMG toolholders, but ensure correct clamping and seat condition to benefit from the negative 0° relief and to maintain cutting stability. What surface quality and tool life can be expected? When used within recommended finishing parameters, the insert yields fine surface finishes and extended edge life thanks to the cermet grade and optimised chip control; validate process data on a sample workpiece before series production. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter brand is referenced for clarification of the offered article. Protected trademarks and trade names remain the property of their respective owners. The article offered is an original, brand-new product from the manufacturer. Walter Tools (Walter AG) is part of the Sandvik Group.
CNMG120404-FP5 WKP01G WKP01G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating and the WKP01G grade for reliable, high‑productivity turning of steel and cast iron; the FP5 chipbreaker and a 0.4 mm corner radius ensure stable chip control and consistent edge life. Order directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. CNMG120404-FP5 WKP01G turning insert — Tiger·tec Gold coating, FP5 chipbreaker (Walter Tools) The CNMG120404-FP5 WKP01G is a rhombic 80° indexable insert designed for general turning operations, optimised for machining steel and cast iron with a focus on process security and long tool life. Tiger·tec Gold coating for high process security WKP01G grade for steel and cast iron FP5 chipbreaker for stable chip control 0.4 mm corner radius for consistent edge strength Reliable performance from Tiger·tec Gold for consistent production The combination of Tiger·tec Gold coating and the WKP01G carbide grade delivers improved resistance to abrasive wear and thermal loading when machining steel and cast iron. This coating technology is formulated to maintain a stable cutting edge under continuous operation, which reduces tool changes and supports uninterrupted production. The result is a more predictable machining process and reduced downtime, making the insert an economical choice for busy turning centres. Stable chip control and reduced machining interruptions The FP5 chipbreaker is engineered to promote short, controllable chips when cutting common ferrous materials, which simplifies chip evacuation and reduces the risk of entanglement. Stable chip formation lowers the incidence of workpiece surface damage and tool vibration, contributing to improved cycle times and fewer rejects. For operations where chip control is critical, the insert’s geometry supports safer, more efficient handling of swarf and a cleaner working environment. Geometry that protects the cutting edge and widens application scope The rhombic 80° form combined with a 0° (negative) rake angle increases edge robustness for heavier cuts and interrupted work. A 0.4 mm corner radius balances edge strength with achievable surface finish, offering durability without sacrificing part quality. The insert is manufactured to tolerance class M, ensuring repeatable seating and predictable cutting behaviour in modular toolholders. These geometric choices make the insert suitable for a broad range of turning tasks where stability and repeatability are priorities. Practical advantages for workshop efficiency and tool management Using an indexable insert reduces per‑part tooling costs compared with brazed or solid carbide alternatives: only the small plate is replaced when worn, while the rigid holder is retained. The CNMG‑style shape supports both roughing and finishing passes depending on cutting data and machine stability. Clear material classification (P/K) simplifies tool selection for operators and process engineers, while the robust coating and chipbreaker support longer intervals between tool changes, lowering operating complexity and supporting sustainable production practices. Discuss application requirements with Metav Werkzeuge to confirm fitment and optimise cutting data for the Tiger·tec Gold WKP01G inserts; contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice Technical data Article number: CNMG120404-FP5-WKP01G-WALTER Designation: CNMG120404-FP5 WKP01G Product type: Drehwendeschneidplatte Facts Plate size: 12 Thickness: 04 Corner radius: 0,4 mm Free cutting angle: 0° (negativ) Tolerance class: M Special features Series: Tiger-tec Gold Grade: WKP01G Chipbreaker: FP5 Plate form: Rhombus 80° Material compatibility: P / K (steel and cast iron) Execution: G FAQ Which materials is this insert suitable for machining? The CNMG120404-FP5 WKP01G insert from Walter Tools is designed for steel and cast iron applications, corresponding to the ISO groups P and K. What effect does the 0.4 mm corner radius have on machining? A 0.4 mm corner radius increases edge strength and wear resistance for the CNMG120404-FP5 WKP01G, supporting higher feed rates and better durability while maintaining a good surface finish. How does the FP5 chipbreaker influence production? The FP5 chipbreaker on this turning insert promotes short, controlled chips that ease chip evacuation, reduce vibration and help maintain consistent cycle times. Is the insert suitable for interrupted cuts or heavy roughing? The rhombic 80° form with a 0° negative rake angle gives the CNMG120404-FP5 WKP01G enhanced edge stability, making it appropriate for interrupted cuts and more robust turning operations. How to choose the right insert variant for a specific workpiece? Match the workpiece material to the insert’s ISO application (P for steel, K for cast iron), consider required surface finish and cutting forces, and consult Metav Werkzeuge for cutting‑data recommendations and holder compatibility. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The item offered is an original, factory‑new product of the manufacturer. Walter Tools is part of the Walter AG group.
CNMG120404-FP5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, a proven FP5 chipbreaker and stable rhombic 80° geometry for reliable steel turning; order directly via Metav Werkzeuge or consult the technical team for application advice. CNMG120404-FP5 WPP10G indexable turning insert – Tiger·tec Gold, FP5 chipbreaker (Walter Tools) CNMG120404-FP5 WPP10G is a negative-rake, rhombic 80° turning insert optimised for ISO P steel machining and continuous production tasks Tiger·tec Gold coating for wear resistance Suitable for steel (ISO P) machining FP5 chipbreaker for controlled chip formation Rhombic 80° geometry with 0.4 mm corner radius Maximum productivity with a wear-resistant grade The combination of Tiger·tec Gold coating and the WPP10G grade delivers extended tool life in steel turning applications. The coated carbide construction provides enhanced resistance to abrasion and built-up edge formation, which translates into longer uninterrupted cutting times and fewer tool changes. The coating technology is designed to sustain elevated cutting temperatures typical for ISO P materials, helping to preserve edge integrity and maintain consistent cycle times in serial production. Reliable chip control and consistent surface finish The FP5 chipbreaker and the rhombic 80° geometry provide predictable chip formation and evacuation when machining a wide range of steels. The negative clearance angle of 0° and the 0.4 mm corner radius produce stable cutting conditions that reduce vibration and improve surface integrity. Stable chips and reduced edge wear support higher feed rates where appropriate, resulting in improved process stability and a more repeatable component finish across batch runs. Easy integration into existing tool systems The CNMG form is widely accepted in standard turning toolholders, allowing straightforward retrofitting without special adaptors. The insert’s nominal size 12 and plate thickness 04 conform to common toolholder dimensions, while the tolerance class M supports reproducible seating and repeatable index positions. These characteristics reduce set-up time and help to keep machine downtime to a minimum, supporting lean production practices and consistent parts quality. Targeted for production-focused steel machining Designed for professional workshops and high-volume turning operations, this grade is most effective on unalloyed and alloyed steels as defined by ISO P. The balance of wear resistance and toughness in the cutting material makes it suitable for a range of applications from medium to demanding cutting conditions. The geometry and chip control strategy contribute to productive material removal, making the insert a pragmatic choice where uptime and predictable tool life are priorities. Contact Metav Werkzeuge for a tailored recommendation on holder compatibility and cutting data or request assistance for optimisation with Walter Tools Tiger·tec Gold inserts Technical data Article number: CNMG120404-FP5-WPP10G-WALTER Designation: CNMG120404-FP5 WPP10G Brand: Walter Tools Series: Tiger·tec Gold Core specifications Size: 12 Thickness: 04 Corner radius: 0.4 mm Clearance angle: 0° (negative) Tolerance class: M Features Chipbreaker: FP5 Plate form: Rhombus 80° Grade: WPP10G (coated carbide) Suitable material group: Steel (ISO P) Application focus: Turning / indexable insert FAQ Is this insert suitable for stainless steel? The CNMG120404-FP5 WPP10G is specified for ISO P (steel) applications; stainless steel is not listed among the intended material groups for this grade. Which toolholders accept CNMG120404-FP5 inserts? Standard toolholders designed for CNMG indexable inserts accept CNMG120404-FP5; compatibility depends on holder seat geometry and clamping style. How does the Tiger·tec Gold coating affect cutting performance? The Tiger·tec Gold coating on the WPP10G grade improves wear resistance and thermal stability in steel turning, which helps to extend edge life and maintain consistent cutting performance. What benefits does the FP5 chipbreaker provide? The FP5 chipbreaker promotes controlled chip formation and evacuation during steel machining, aiding process stability and surface finish consistency. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and brand names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
CNMG120404-FP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the FP5 chipbreaker for stable chip formation, and a robust rhombic 80° geometry to keep turning operations productive and repeatable; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CNMG120404-FP5 WPP20G indexable turning insert – Tiger·tec Gold, FP5 chipbreaker (Walter Tools) The CNMG120404-FP5 WPP20G is an indexable turning insert designed for steel turning applications, combining a coated carbide grade with an FP5 chipbreaker to ensure reliable chip control in general machining. Tiger·tec Gold coating WPP20G Rhombic 80° insert form FP5 chipbreaker for stable chip control Corner radius 0.4 mm for precision Higher productivity through optimised grade and chip control The coated-carbide WPP20G grade from the Tiger·tec Gold family delivers a balance of wear resistance and toughness tailored for ISO group P (steel). The FP5 chipbreaker is engineered for consistent chip formation across a wide range of cutting parameters, which reduces interruptions from chip-related issues and helps maintain cycle-time targets. This combination supports sustained cutting speeds with lower flank wear, improving overall process economy and reducing the need for frequent tool changes. Robust geometry for flexible turning applications The rhombic 80° insert form and negative 0° clearance provide a sturdy cutting edge suited to both medium and heavier machining tasks. The CNMG designation reflects a universal geometry that fits standard toolholders, while the code elements (size 12, thickness 04) indicate the insert’s nominal dimensions used for tool selection. A 0.4 mm corner radius gives a compromise between edge strength and surface finish, enabling stable cuts and repeatable part tolerances in series production. Application benefits and operational reliability Optimised for machining steels, the insert supports wide material coverage within group P, including unalloyed and alloyed steels where thermal and chip-formation behaviour is typical of steel cutting. The coated grade and insert design contribute to consistent tool life and predictable performance, which simplifies process planning and inventory management. As a Walter Tools product, the insert benefits from established quality control and manufacturing consistency, helping to secure reproducible results in production environments. For reliable, high-productivity steel turning, contact Metav Werkzeuge for availability and tailored recommendations on Walter Tools inserts. Technical data Article number: CNMG120404-FP5-WPP20G-WALTER Designation: CNMG120404-FP5 WPP20G Product type: Indexable turning insert Brand: Walter Tools Series: Tiger·tec Gold Numbers / Core technical data Insert size: 12 Thickness code: 04 Corner radius: 0.4 mm Clearance angle: 0° (negative) Tolerance class: M Designs / Special features Coating / grade: WPP20G (Tiger·tec Gold) Chipbreaker: FP5 Insert form: Rhombic 80° Applicable material group: Steel (ISO P) Execution: G FAQ What materials is this insert suited for? The CNMG120404-FP5 WPP20G insert is formulated for ISO group P, which covers a broad range of steels including unalloyed and alloyed steels. What role does the FP5 chipbreaker play? The FP5 chipbreaker on the CNMG120404-FP5 helps produce controllable chips and reduces interruptions from chip entanglement, improving process stability. How does the Tiger·tec Gold grade benefit production? Tiger·tec Gold (WPP20G) provides a balanced coating technology that increases wear resistance while retaining sufficient toughness for repeatable performance in steel turning. Which holder geometry is compatible with this insert form? The rhombic 80° CNMG form fits standard CNMG-compatible toolholders and is suitable for a variety of turning setups requiring an 80° cutting geometry. What does the 0.4 mm corner radius affect in machining? A 0.4 mm corner radius increases edge strength for durable cutting while still allowing acceptable surface finish and dimensional control for many turning operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes; there is no association between our company and the named brands. The offered article is an original, factory-new product of the manufacturer. The Walter AG (brand presentation: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group.
CNMG120404-FW5 WKP01G FWK01G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coated grade and the FW5 chipbreaker to achieve stable chip formation and consistent productivity in steel and cast iron turning; order the inserts directly via Metav Werkzeuge or contact the consultants for application advice. CNMG120404-FW5 WKP01G turning indexable insert — Tiger·tec Gold coating, for steel and cast iron | Walter Tools The CNMG120404-FW5 WKP01G is a rhombic 80° turning insert with a 0° negative clearance, designed for robust and predictable performance in steel (P) and cast iron (K) machining. Tiger·tec Gold coated carbide grade WKP01G Rhombic 80° insert, 0° negative clearance FW5 chipbreaker for controlled chip formation Optimised for steel and cast iron machining High, consistent productivity for steel and cast iron turning The combination of the Tiger·tec Gold coating and the WKP01G grade provides a reliable baseline for high-volume production where consistent tool life and predictable results matter. As a coated carbide solution, this insert manages the thermal and abrasive stresses typical when machining unalloyed and alloyed steel as well as abrasive cast iron, aligning with ISO 513 group designations P and K. The wear-resistant coating helps maintain a stable cutting edge, reducing the frequency of tool changes and supporting a smoother production flow. For job shops and production lines seeking fewer interruptions, this grade delivers improved process stability and repeatable component quality. Geometry engineered for strength and surface quality The rhombic 80° geometry balances accessibility and edge strength, allowing a broad range of turning operations while maintaining a secure cutting edge. The 0° negative clearance increases insert robustness, which is particularly advantageous in interrupted cuts and heavy roughing passes where edge strength is critical. Combined with the 0.4 mm corner radius, the geometry supports improved surface finish without sacrificing edge stability; the modest radius reduces risk of edge chipping while allowing acceptable contouring in finishing passes. These design choices translate into fewer rejects and a steadier tool-change cadence in mixed-production environments. Controlled chip formation and process security The FW5 chipbreaker is tuned for dependable chip control in both long-chipping steels and the shorter, more brittle chips of many cast irons. Effective chip management reduces the need for additional operator intervention, lowers the risk of workpiece damage, and supports automated or lights-out operations. The insert’s tolerance class M and standardised form make it straightforward to integrate into existing toolholders and programming routines, helping to shorten setup times and keep machining parameters consistent across production batches. For specialist applications or uncertain process windows, technical advice is available to select optimal cutting data and coolant strategies to extend tool life and secure surface quality. For process-focused results with Walter Tools’ Tiger·tec Gold grade, contact Metav Werkzeuge for tailored application support and delivery: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CNMG120404-FW5-WKP01G-WALTER Designation: CNMG120404-FW5 WKP01G Product type: Turning indexable insert Series: Tiger·tec Gold Grade: WKP01G Manufacturer: Walter Tools Facts Size: 12 Thickness: 04 Corner radius: 0.4 Clearance angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: FW5 Shape: Rhombic 80° Material application: Steel (P), Cast iron (K) FAQ Which materials is this insert suitable for? The CNMG120404-FW5 WKP01G is specified for steel (P) and cast iron (K) in accordance with ISO 513 classifications, making it suitable for a wide range of turning tasks in those material groups. What does the WKP01G grade offer? WKP01G is Walter Tools’ coated carbide grade within the Tiger·tec Gold technology, offering a balance of wear resistance and thermal stability for sustained cutting performance. How does the FW5 chipbreaker affect machining? The FW5 chipbreaker promotes controlled chip formation for both long-chipping steels and shorter cast-iron chips, improving process security and reducing manual chip handling. Is the insert robust for interrupted cuts? Yes, the combination of the 0° negative clearance and rhombic geometry delivers enhanced edge strength, making the insert suitable for interrupted and heavy cutting conditions. Can this insert be used in standard CNMG toolholders? The insert follows standard CNMG geometry conventions and the tolerance class M, facilitating straightforward integration into corresponding toolholders and existing setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanatory purposes only. There is no association between our company and the mentioned brands. The offered item is original, factory-new merchandise of the stated manufacturer.
CNMG120404-FW5 WPP10G G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WPP10G grade and the FW5 chipbreaker to achieve stable chip control and predictable tool life in steel turning; order directly via Metav Werkzeuge or ask the consultants for tailored cutting data. CNMG120404-FW5 WPP10G indexable turning insert – Tiger·tec Gold, FW5 chipbreaker (Walter Tools) The CNMG120404-FW5 WPP10G is a rhombic 80° indexable turning insert designed for high-performance steel machining with a negative 0° rake angle and a 0.4 mm corner radius for reliable finishing and medium-duty turning Tiger·tec Gold coating for extended tool life Grade WPP10G optimised for steel machining FW5 chipbreaker for stable chip formation Rhombic 80° shape with 0.4 mm corner radius Consistent chip control for efficient steel turning The insert’s FW5 chipbreaker is engineered to produce predictable, short chips when machining steel, reducing the risk of entanglement and downtime. The combination of a coated substrate and a defined chip geometry converts cutting forces into a controlled chip flow, which improves process stability on lathes and reduces the need for frequent operator intervention. For workshops aiming to increase uptime, the reliable chip break behaviour supports longer unmanned runs and more consistent surface quality. Durable, high-performance carbide grade for productivity The WPP10G grade, part of the Tiger·tec Gold family, is a coated carbide that balances wear resistance and toughness for general steel applications. This grade is specified for typical heat generation and chip formation encountered in steel turning, offering a compromise between long tool life and resistance to chipping. The result is a cost-efficient tool that maintains edge integrity across a range of cutting conditions, supporting higher productivity without sacrificing component tolerances. Precision geometry for predictable finishing and repeatability The rhombic 80° geometry with a 0.4 mm corner radius and a 0° (negative) rake angle provides a stable cutting edge suited to both semi-finish and finish operations. This geometry minimises vibration and ensures consistent contact with the workpiece, delivering repeatable dimensions and good surface finish. When tight tolerances and reliable batch-to-batch consistency are required, the insert’s geometry contributes directly to predictable machining results and simpler process planning. Process support and application suitability This indexable insert is configured specifically for steel machining (material group P) and is supplied in the CNMG format for broad toolholder compatibility. The coated surface and grade selection make it appropriate for a wide spectrum of turning tasks, from general-purpose roughing through to precision finishing, depending on cutting data and machine rigidity. For customers seeking tailored cutting parameters or validation in specific set-ups, technical consultation is available to align the insert selection with the intended application and machine capabilities. Contact Metav Werkzeuge for cutting data, application recommendations and to request the CNMG120404-FW5 WPP10G insert from Walter Tools Technical Data Article number: CNMG120404-FW5-WPP10G-WALTER Designation: CNMG120404-FW5 WPP10G Product type: Drehwendeschneidplatte / indexable turning insert Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP10G Core figures Insert size: 12 Insert thickness: 04 Corner radius: 0.4 mm Relief / rake angle: 0° (negative) Tolerance class: M Materials & special features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: FW5 Shape: Rhombic 80° Grade family: WPP10G Suitable for: Steel (material group P) Execution: G FAQ What applications is this insert best suited for? The CNMG120404-FW5 WPP10G insert from Walter Tools is best suited for machining steel in turning operations, offering a balance between wear resistance and toughness for both semi-finish and finish tasks. How does the FW5 chipbreaker improve production? The FW5 chipbreaker on this Walter Tools insert produces stable, short chips for steel, which enhances process reliability and reduces interruptions caused by chip handling. Can the CNMG120404-FW5 WPP10G be used for finishing passes? Yes, the rhombic 80° geometry and 0.4 mm corner radius provide the stability and edge strength required for finishing when combined with appropriate cutting parameters. What makes the WPP10G grade different from standard grades? WPP10G, part of the Tiger·tec Gold family, is a coated carbide grade optimised for steel machining that balances tool life and toughness for consistent performance across various cutting conditions. Is technical support available for selecting cutting data? Technical consultation is available through Metav Werkzeuge to align machining parameters, toolholder choice and feed/speed recommendations with the CNMG120404-FW5 WPP10G insert and the intended application. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer Walter Tools.
CNMG120404-FW5 WPP20G WPP20G Wendeplatten - Walter Tools
CNMG120404-FW5 WPP20G offers a balance of wear resistance and reliable chip control thanks to the Tiger·tec Gold coating and the FW5 chipbreaker; use this combination to improve productivity and tool life on P materials and order directly via Metav Werkzeuge or contact their consultants for tailored cutting data. Drehwendeschneidplatte CNMG120404-FW5 WPP20G – indexable insert for general turning with Tiger·tec Gold coating CNMG120404-FW5 WPP20G is a rhombic 80° turning insert designed for versatile steel turning, combining a coated carbide grade and an FW5 chipbreaker for stable machining. Tiger·tec Gold coated carbide grade WPP20G FW5 chipbreaker for consistent chip control Rhombic 80° geometry for versatile turning Negative 0° rake with 0.4 mm corner radius High productivity through wear-resistant cutting performance The combination of coated carbide in the Tiger·tec Gold family and the WPP20G grade delivers improved wear resistance and a longer effective tool life when machining ISO group P (Stahl) materials. The coating technology reduces flank wear and thermal load at the cutting edge, which translates into fewer indexings and a smoother production flow. For operations where consistent edge life and process stability matter, this insert offers a measurable productivity gain while maintaining machining reliability. Controlled chip formation and surface quality The FW5 chipbreaker is engineered for stable chip control during turning; it actively shapes chips for reliable evacuation and reduces the risk of built-up edge. The rhombic 80° form, together with the negative 0° rake, helps to moderate cutting forces while enabling robust engagement in general turning tasks. The corner radius 0.4 mm contributes to an improved surface finish by supporting a stronger edge, especially in finishing and general-purpose applications where balanced geometry improves part consistency. Application range and compatibility with standard toolholders Designed according to common CNMG specifications, the insert fits standard CNMG toolholders and is intended primarily for machining P (Stahl)—covering unalloyed and alloyed steels that generate typical heat and chip conditions in turning. The CNMG120404-FW5 WPP20G is therefore suitable for a wide range of workshop and production tasks, from roughing operations under controlled conditions to light finishing where surface integrity is valued. Selection of carbide grade and chipbreaker helps to match the cutting conditions without overcomplicating holder or machine setup. Economic advantages and selection guidance Using a coated grade such as WPP20G can reduce the total cost per component by extending index life and lowering downtime for insert changes. The modest corner radius and neutral rake provide a compromise between edge strength and surface quality, reducing the need for multiple specialised inserts. For optimal results, pair the insert with appropriate feed and speed parameters for the workpiece class and consider the Tiger·tec Gold benefits where longer runs or variable batch sizes demand consistent performance. For specific cutting data or to discuss suitability for a particular application, contact Metav Werkzeuge directly — Metav Werkzeuge can advise on recommended feeds, speeds and compatible holders for this Walter Tools turning insert. Technical Data Article number: CNMG120404-FW5-WPP20G-WALTER Designation: CNMG120404-FW5 WPP20G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP20G Numbers / Core Technical Data Inscribed circle: 12 mm Corner radius: 0.4 mm Thickness code: 04 Relief / rake: 0° (negative) Tolerance class: M Designs / Special Features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: FW5 Shape: Rhombus 80° Material suitability: P (Stahl) Execution: G FAQ What workpiece materials is this insert best suited to machine? The CNMG120404-FW5 WPP20G insert is optimised for ISO group P, i.e. a range of Stahl materials such as unalloyed and alloyed steels, providing stable performance under typical steel turning conditions. How does the FW5 chipbreaker affect chip formation? The FW5 chipbreaker on the CNMG120404-FW5 WPP20G shapes chips for reliable evacuation and reduced risk of entanglement, improving process stability in continuous turning operations. Can this insert be used for finishing operations? Yes; the rhombic 80° geometry combined with a corner radius of 0.4 mm on the CNMG120404-FW5 WPP20G supports acceptable surface quality for light finishing, while maintaining edge strength. Is the Tiger·tec Gold coating suitable for high-temperature cutting? The Tiger·tec Gold coating on the WPP20G grade enhances resistance to thermal wear and oxidation, making the insert appropriate where heat generation is a factor during continuous cutting of Stahl. Which toolholders are compatible with this insert designation? The CNMG format follows standard industry dimensions and therefore fits common CNMG toolholders designed for rhombic 80° inserts; verify holder clamping type and insert seat for exact compatibility. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are used here for explanatory purposes only. The referenced article is an original, factory-new product of the stated manufacturer. The Walter Tools brand is mentioned to clarify origin and product characteristics.
CNMG120404-FW5 WSM10S WSM10S Wendeplatten - Walter Tools
Reliable productivity and consistent edge life from the WSM10S grade and Tiger·tec Silver coating, combined with the CNMG 80° geometry and FW5 chipbreaker, ensure stable machining of stainless steel and superalloys; order directly via Metav Werkzeuge or request application advice from our consultants. CNMG120404-FW5 WSM10S — Indexable turning insert, Tiger·tec Silver (Walter Tools) A robust CNMG120404-FW5 WSM10S indexable turning insert engineered for demanding stainless steel and superalloy turning applications Tiger·tec Silver coated carbide grade WSM10S Designed for stainless steel and superalloys Rhombic 80° CNMG insert, 0.4 mm corner radius 0° negative relief for stable cutting Performance tailored for difficult-to-machine materials The WSM10S grade, realised within Tiger·tec Silver coating technology, delivers enhanced thermal resistance and stable cutting-edge behaviour during the machining of stainless steel and heat-resistant superalloys. Coated carbide construction provides a consistent balance between wear resistance and toughness, reducing the risk of edge build-up and unexpected tool failure. As a result, cycle times remain predictable and component quality stays consistent, which supports higher throughput in series production and small-batch specialist jobs. Geometry and chip control that improve surface quality The CNMG rhombic 80° format with a 0.4 mm corner radius and the FW5 chipbreaker combine to promote controlled chip formation and reduced vibration at the cutting zone. The 0° (negative) relief angle increases edge robustness for interrupted or heavy cuts, making the insert suitable where process stability is critical. These geometric choices translate into fewer tool changes and a more reliable surface finish, allowing machining strategies to favour productivity without compromising part accuracy. Integration, economy and predictable tool life As a coated-carbide insert from Walter Tools' Tiger·tec Silver family, this indexable insert is compatible with standard CNMG toolholders and clamping systems, enabling straightforward integration into existing turning operations. Predictable wear characteristics and dependable chip evacuation reduce unplanned downtime and tooling costs over time. For production environments that demand reproducible results when machining stainless steel or titanium alloys, the combination of grade, geometry and chipbreaker offers a practical route to improved process reliability. Choose the Walter Tools Tiger·tec Silver grade WSM10S for robust stainless steel machining — contact Metav Werkzeuge for tailored cutting data, availability and rapid delivery: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: CNMG120404-FW5-WSM10S-WALTER Designation: CNMG120404-FW5 WSM10S Product type: Indexable turning insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM10S Core data Insert size: 12 mm Thickness: 04 Corner radius: 0.4 mm Relief angle: 0° (negative) Chipbreaker: FW5 Plate form: Rhombus 80° Tolerance class: M Special features Coating/technology: Tiger·tec Silver Cutting material class: coated carbide Material suitability: stainless steel (M), Superalloys / Titanium (S) Execution: G Bezeichnung without grade: CNMG120404-FW5 FAQ What materials is this insert suitable for? The CNMG120404-FW5 WSM10S indexable turning insert by Walter Tools is optimised for stainless steel and heat-resistant superalloys (ISO material groups M and S), providing secure chip control and edge stability. What distinguishes the WSM10S grade within Tiger·tec Silver? WSM10S is a coated carbide grade within the Tiger·tec Silver range that emphasises thermal resistance and consistent edge life, especially useful when machining tough, heat-generating materials. Which geometry and chipbreaker are used for this insert? The insert features CNMG (rhombic 80°) geometry, a 0.4 mm corner radius and the FW5 chipbreaker, combined with a 0° negative relief to enhance cutting robustness and chip evacuation. Is the insert compatible with standard CNMG toolholders? Yes, the CNMG120404-FW5 WSM10S follows industry-standard CNMG dimensions and fits conventional holders; correct seating and clamping are recommended to ensure process security. How does this insert support production efficiency? The coated-carbide grade and Tiger·tec Silver coating reduce wear and support stable chip formation, which decreases tool-change frequency and improves overall equipment uptime; use the SKU CNMG120404-FW5-WSM10S-WALTER when ordering. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools: Walter AG (brand appearance: Walter Tools) is a leading manufacturer of precision tools for metalworking and is part of the Sandvik group. Trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only; there is no affiliation between our company and the mentioned manufacturers. The offered article is original factory-new goods from the manufacturer.
CNMG120404-FW5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the WSM20S grade with Tiger‑tec Silver coating and the FW5 chipbreaker for stable chip control and extended cutting edge life; the insert is optimised for stainless steel and heat‑resistant alloys and ensures consistent surface quality and fewer tool changes. Order directly via Metav Werkzeuge or consult our technical advisors for cutting‑parameter setup. CNMG120404-FW5 WSM20S Drehwendeschneidplatte by Walter Tools — Tiger‑tec Silver, FW5 chipbreaker for stainless and superalloys A CNMG120404-FW5 WSM20S turning insert engineered for productive machining of stainless steels and heat‑resistant alloys, combining robust geometry with Tiger‑tec Silver coating for reliable tool life. Tiger‑tec Silver coating for excellent wear resistance FW5 chipbreaker for controlled chip formation Suited for stainless steel and heat‑resistant alloys Rhombic 80° CNMG insert with 0.4 mm corner radius Consistent cutting performance on demanding materials The combination of the WSM20S cutting grade and the Tiger‑tec Silver coating provides a resistant cutting edge that copes well with materials that generate heat and tend to build up on the tool. In practice, this means improved process security when turning stainless steel (ISO group M) and heat‑resistant superalloys (ISO group S). The coating increases thermal stability and reduces flank wear, which translates into fewer interruptions for tool changes and more consistent part quality across production runs. For shops moving between stainless and high‑temperature alloys, the reliable behaviour of this grade reduces setup time and eases machining parameter selection. Geometry and chip control that reduce rework The rhombic 80° CNMG form with a 0.4 mm corner radius and 0° (negative) clearance angle delivers a robust cutting edge that resists chipping during interrupted cuts. The FW5 chipbreaker is optimised to produce shorter, more manageable chips when machining sticky or gummy materials, lowering the risk of surface damage and eases chip evacuation in turning operations. By combining a compact corner radius with a stable insert body, the design improves surface finish and reduces the likelihood of rework caused by build‑up edge or heat‑induced surface distress. Shops benefit from reduced cycle variability and a more predictable tool life. Productivity gains from coating and grade selection The Tiger‑tec Silver technology offers a balance of wear resistance and toughness that supports productive machining at higher cutting speeds for many difficult‑to‑cut alloys. The coated WSM20S grade is designed to maintain a stable edge under thermal load while still delivering repeatable performance, which supports longer intervals between indexings and inserts changes. For production environments where uptime and consistent dimensional quality matter, this insert helps to lower tooling consumption and maintain steady throughput. The result is improved overall machining economy through fewer interventions and stable part output. Contact Metav Werkzeuge for tailored machining advice on Walter Tools Tiger‑tec Silver inserts and to secure optimal cutting parameters for specific stainless steel and superalloy applications Technical data SKU: CNMG120404-FW5-WSM20S-WALTER Designation: CNMG120404-FW5 WSM20S Manufacturer: Walter Tools Facts Plate size: 12 mm Thickness: 4 mm Corner radius: 0.4 mm Clearance angle: 0° (negative) Shape: Rhombic 80° Special features Chipbreaker: FW5 Coating: Tiger‑tec Silver Grade: WSM20S Suitable for: stainless steel (M), heat‑resistant alloys / titanium (S) Execution: G Tolerance class: M Series: Tiger‑tec Silver Product type: Turning insert (drehwendeschneidplatte) FAQ What materials is this insert best suited for? The CNMG120404-FW5 WSM20S insert and its WSM20S grade are optimised for stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering reliable chip control and thermal stability. How does the FW5 chipbreaker influence machining? The FW5 chipbreaker on this Walter Tools insert produces controlled, short chips that improve evacuation and reduce surface damage risk during turning of sticky or gummy materials. Can the insert be used for interrupted cuts? Yes; the rhombic 80° geometry with a 0.4 mm corner radius and negative clearance angle provides a robust edge that resists chipping in interrupted turning operations. How does Tiger‑tec Silver coating benefit tool life? The Tiger‑tec Silver coating enhances wear resistance and thermal stability, helping to maintain a sharp cutting edge under higher temperatures and prolonging effective tool life. Is this insert compatible with standard CNMG toolholders? The CNMG120404-FW5 form conforms to the CNMG geometry and is intended for use in toolholders designed for rhombic 80° CNMG inserts; confirmation of seat compatibility with the specific holder is recommended. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mention of brand names is for identification purposes only; the offered item is original, brand‑new merchandise from the manufacturer. The referenced brand is Walter Tools. Marked names and registered trademarks are used solely to describe product compatibility and origin.
CNMG120404-MK5 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the insert’s combination of high wear resistance, reliable chip control and a geometry optimised for cast-iron turning; order the original insert directly via Metav Werkzeuge or consult the team for technical guidance. Indexable turning insert CNMG120404-MK5 WKK10S for cast iron | Walter Tools CNMG120404-MK5 WKK10S is a negative-geometry turning insert designed for efficient machining of cast iron components in serial and single-part production. Tiger-tec Silver coating boosts wear life WKK10S grade tuned for cast iron machining MK5 chipbreaker for stable chip control Rhombic 80° form with 0.4 mm nose radius Increased productivity through optimised wear resistance The CNMG120404-MK5 WKK10S insert delivers predictable performance by combining the Tiger-tec Silver coating with a coated carbide base, providing high wear resistance under the intermittent, abrasive conditions typical of cast-iron machining. The engineered coating reduces flank wear and adhesion, which translates into longer tool life and fewer index changes on the lathe. With a negative cutting geometry and a robust edge preparation, the insert supports consistent surface finish levels while maintaining stable cutting forces, allowing higher metal removal rates without compromising component quality. Reliable chip formation and machining stability Equipped with the MK5 chipbreaker and a rhombic 80° shape, this insert fosters controlled chip breaking and evacuation when turning grey and ductile cast irons (ISO group K). The chipbreaker geometry prevents long, stringy chips and reduces the risk of re-cutting, which enhances process security and protects the workpiece and toolholder. The negative 0° clearance and the 0.4 mm nose radius together create a strong cutting edge that withstands interrupted cuts and part variances, making the insert suitable for both finishing and medium-depth turning operations where stable tool contact matters. Application-focused grade and series benefits The WKK10S grade, part of the Tiger-tec Silver series, is specifically formulated for abrasive cast-iron applications: it balances hardness and toughness to cope with short, breaking chips and hard inclusions. This targeted grade selection reduces the need for frequent tool changes and supports predictable process windows, which is especially beneficial for batch production and production parts where repeatability is essential. The insert’s specification and ISO designation permit straightforward integration into standard toolholders and programming practices, facilitating quick setup and reproducible results across work shifts. Contact Metav Werkzeuge to discuss integration of Walter Tools inserts into the production process or to order the CNMG120404-MK5 WKK10S; Metav Werkzeuge can be reached at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: CNMG120404-MK5-WKK10S-WALTER Designation: CNMG120404-MK5 WKK10S Series: Tiger-tec Silver Grade: WKK10S Manufacturer: Walter Tools Numbers / Core technical data Size: 12 Thickness code: 04 Corner radius: 0.4 mm Clearance angle: 0° (negative) Tolerance class: M Special features / Versions Coating: Tiger-tec Silver Chipbreaker: MK5 Shape: Rhombic 80° Material grade: coated carbide Application: cast iron (ISO group K) FAQ Is this insert suitable for all types of cast iron? The WKK10S grade is tailored for cast-iron machining (ISO group K) and performs well on grey and many ductile cast irons; selection should consider specific alloy and hardness. What benefits does the Tiger-tec Silver coating provide? The Tiger-tec Silver coating on the CNMG120404-MK5 WKK10S reduces abrasive wear and improves edge stability, extending tool life in abrasive cast-iron conditions. How does the MK5 chipbreaker influence machining? The MK5 chipbreaker delivers predictable chip control and reduced risk of long chips, enhancing process security during continuous turning operations. Can the insert handle interrupted cuts and roughing? With its negative geometry and sturdy 0.4 mm nose radius, the insert offers robust edge strength suitable for intermittent cuts and medium-depth roughing passes. Which toolholders are compatible with this ISO insert? The insert follows standard CNMG ISO geometry and interfaces with toolholders designed for CNMG inserts; ensure the holder supports negative inserts and the required clamping method. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original factory-new merchandise of the manufacturer.
CNMG120404-MK5 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance, precise MK5 chip control and a Rhombic 80° geometry for reliable, productive cast-iron turning; order the CNMG120404-MK5 WKK20S insert directly via Metav Werkzeuge or consult our specialists for integration advice CNMG120404-MK5 WKK20S indexable turning insert — Rhombic 80° for cast iron, Walter Tools The CNMG120404-MK5 WKK20S is a rhombic 80° indexable turning insert engineered for productive machining of cast iron, combining the Tiger·tec Silver coating and an MK5 chipbreaker for optimised chip formation in demanding turning operations Tiger·tec Silver coating for wear resistance Optimised for cast iron machining Rhombic 80° geometry for versatile turning MK5 chipbreaker for controlled chip formation Increased throughput through optimised grade and geometry The combination of the WKK20S carbide grade with the Tiger·tec Silver coating delivers measurable benefits for cast-iron turning: enhanced wear resistance and reduced flank wear lead to longer intervals between index changes and fewer interruptions in the production flow. The Rhombic 80° form and a corner radius 0.4 mm provide flexible cutting engagement for a wide range of turning tasks, reducing setup complexity while maintaining consistent dimensional results. With the MK5 chipbreaker, the insert fosters predictable, short chips that simplify evacuation and protect the tool life, contributing directly to improved cycle times and lower unit costs. Reliable performance for cast iron (ISO group K) Designed specifically for abrasive, short-chip materials, this insert is tuned for the challenges of cast-iron machining. The substrate and coating address the common causes of rapid wear when cutting grey and nodular cast irons by combining toughness with surface protection. The result is stable cutting behaviour even under interrupted cuts and variable depths, which in practice reduces rework and improves surface quality. For workshops seeking consistent repeatability in series production, the engineering focus on cast iron makes this insert a dependable choice for process stabilisation. Coating technology and process advantages The Tiger·tec Silver coating technology enhances thermal resilience and reduces adhesive wear at the cutting edge, supporting higher cutting data where machine rigidity and workholding permit. When paired with the MK5 chipbreaker and a 0° negative relief angle, the insert offers a controlled cutting action that balances edge strength with chip formation. These technical characteristics translate into tangible shop-floor advantages: extended index life, fewer tool changes, and a better first-pass surface finish. For production planners, the insert’s properties help to predict tool consumption more accurately and to optimise tooling budgets. For machining cast iron with consistent productivity and predictable tool life, contact Metav Werkzeuge for tailored advice on Walter Tools Tiger·tec Silver inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CNMG120404-MK5-WKK20S-WALTER Product type: Indexable turning insert Designation: CNMG120404-MK5 WKK20S Manufacturer: Walter Tools Core specifications Insert size: 12 Thickness: 04 Corner radius: 0.4 mm Relief angle: 0° (negative) Tolerance class: M Shape: Rhombic 80° Features & suitability Grade: WKK20S (Tiger·tec Silver) Chipbreaker: MK5 Suitable for: cast iron (ISO group K) Coating technology: Tiger·tec Silver Series: Tiger-tec Silver Material code: K FAQ Which materials can be machined with this insert? The CNMG120404-MK5 WKK20S insert is optimised for cast iron (ISO group K) and provides controlled chip behaviour and wear resistance when turning grey and nodular cast irons. What does the MK5 chipbreaker provide? The MK5 chipbreaker ensures predictable, short chips and improved chip evacuation; when used with the Tiger·tec Silver grade it supports stable tool life and consistent surface finish. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating increases thermal and abrasive resistance, allowing higher cutting parameters where conditions permit and reducing the frequency of index changes. Is the insert suitable for interrupted cuts or heavy-duty turning? The combination of a 0° negative relief angle and robust grade composition gives the insert good edge strength for many interrupted-cut scenarios typical in cast-iron turning. What is the meaning of the designation CNMG120404-MK5? The designation describes the insert geometry and size (CNMG 12 04 04) with the MK5 chipbreaker; CNMG120404-MK5 WKK20S is the full ISO-style identifier used for ordering. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany. The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, brand-new product from the manufacturer.
CNMG120404-MM5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and the MM5 chipbreaker to improve stability and surface finish when machining stainless steels, while the CNMG 80° geometry and 0.4 mm corner radius deliver robust edge life for reliable production; order directly via Metav Werkzeuge or consult their specialists for cutting-parameter recommendations. CNMG120404-MM5 WMP20G — Turning insert (CNMG, Tiger·tec Gold) by Walter Tools for stainless steel The CNMG120404-MM5 WMP20G is a rhombic 80° indexable turning insert designed for productive machining of stainless steels under medium to robust conditions Tiger·tec Gold coating for improved wear resistance Optimised chip control with MM5 breaker geometry Rhombic 80° CNMG insert, negative 0° rake Corner radius 0.4 mm for robust edge strength Greater process reliability when machining stainless steels The Tiger·tec Gold coating combined with the WMP20G carbide grade provides enhanced resistance to abrasive and adhesive wear, which is particularly important when working with stainless steel grades that tend to generate heat and sticky chips. By stabilising the cutting edge and reducing flank wear, the insert supports longer tool life and fewer interruptions for index changes. This leads to measurable productivity gains and more consistent part quality in serial production. Better surface finish and reduced built-up edge risk The MM5 chipbreaker is optimised for reliable chip formation in tough-to-machine materials. Its geometry promotes short, controlled chips and prevents entanglement, helping to avoid built-up edge on the cutting zone. Combined with the 0.4 mm corner radius and a 0° negative rake, the insert balances edge strength and cutting force to reduce vibrations and enhance surface integrity, decreasing the need for rework and finishing passes. Robust geometry for versatile turning applications The CNMG 80° format offers a stable seating in standard toolholders and good access for external and light internal turning operations. The insert thickness (code 04) and the rhombic geometry support secure clamping and consistent repeatability. For workshops seeking predictable results on stainless steel, this insert delivers a dependable compromise between economy and performance, helping to maintain cycle times even under tougher machining conditions. Practical use and setup guidance for operators When using this insert, select cutting speeds and feeds appropriate for the specific stainless grade; the coated grade performs best when thermal conditions are controlled and coolant strategies are applied consistently. The CNMG120404-MM5 WMP20G insert fits common CNMG toolholders and is suited to medium to heavy engagement where chip control and edge life are priorities. For parameter optimisation and selection of matching toolholders, consult the technical team at Metav Werkzeuge. Contact Metav Werkzeuge for tailored advice on integrating the Walter Tools Tiger·tec Gold CNMG insert into production and for information on availability and cutting-parameter support — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: CNMG120404-MM5-WMP20G-WALTER Designation: CNMG120404-MM5 WMP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WMP20G Product type: Turning insert (indexable) Facts Plate size: 12 mm Corner radius: 0.4 mm Thickness code: 04 Geometry angle: 80° Rake angle: 0° (negative) Special features Chipbreaker: MM5 Coating / carbide class: Tiger·tec Gold / coated carbide Execution: G Tolerance class: M Applicable material group: stainless steel FAQ Is the CNMG120404-MM5 WMP20G suitable for all stainless-steel grades? The CNMG120404-MM5 WMP20G is designed for a broad range of stainless steel alloys and performs well under medium to robust machining conditions, though optimal cutting data should be adjusted to the specific alloy composition. How does the MM5 chipbreaker affect chip control? The MM5 breaker promotes short, controlled chips and consistent evacuation, which reduces the risk of chip entanglement and supports stable cutting when machining stainless steels with the Walter Tools CNMG insert. Can the insert be used in standard CNMG toolholders? Yes, the CNMG 80° format is compatible with standard CNMG toolholders; correct clamping and seat cleanliness are important to ensure repeatable performance. What are the primary benefits of the Tiger·tec Gold coating on this insert? The Tiger·tec Gold coating improves wear resistance and edge stability under the higher heat and adhesive tendencies of stainless steel, resulting in longer tool life and a more consistent surface finish. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany The Walter AG (brand: Walter Tools), headquartered in Tübingen, is among the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Trademark and trade names are the property of their respective owners. The item offered is an original, brand-new product from the manufacturer.
CNMG120404-MM5 WMP20S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, a proven MM5 chipbreaker and the rhombic 80° geometry for stable chip formation and consistent results — order directly via Metav Werkzeuge or consult our specialists for machining advice. CNMG120404-MM5 WMP20S Turning indexable insert, Rhombic 80°, Walter Tools The CNMG120404-MM5 WMP20S is a turning insert engineered for machining stainless steels under medium to robust cutting conditions. Tiger·tec Silver coating Designed for stainless steels (ISO M) Rhombic 80° geometry MM5 chipbreaker for stable chips Consistent cutting performance for stainless steel production The coated carbide grade delivers a predictable trade-off between tool life and cutting reliability, particularly on stainless steels (ISO M) that are prone to work‑hardening and built‑up edge. The combination of the Tiger·tec Silver technology and the specified WMP20S grade supports a stable cutting edge under fluctuating conditions, which helps to reduce rework and unscheduled tool changes. This results in improved throughput and a more stable process capability in batch and continuous turning operations. Geometry and chip control that minimise disruptions The rhombic 80° insert form with a 0.4 mm nose radius and a 0° negative rake provides mechanical robustness and versatility between finishing and semi‑finishing cuts. The MM5 chipbreaker is optimised to promote reliable chip formation when machining tough, adhesive materials, reducing the risk of chip entanglement and machine stoppages. Fewer interruptions and better chip control translate into higher machine utilisation and lower indirect production costs. Coating and grade advantages — why WMP20S pays off The combination of the WMP20S coated carbide and the Tiger·tec Silver series offers enhanced oxidation resistance and edge stability at elevated cutting temperatures typical for stainless steel turning. This technical pairing supports longer periods between indexings and consistent surface quality, which can shorten downstream finishing steps. For practical questions on cutting data or toolholder compatibility, Metav Werkzeuge provides application advice by email or phone: info@metav-werkzeuge.com · +49 2822 7131930. For reliable machining of rostfreie Stähle with Walter Tools' Tiger·tec Silver grade, contact Metav Werkzeuge for tailored recommendations or place an order through Metav Werkzeuge's sales team. Technical data Article number: CNMG120404-MM5-WMP20S-WALTER Label: Drehwendeschneidplatte CNMG120404-MM5 WMP20S Walter Tools Product type: Drehwendeschneidplatte (turning indexable insert) Series/grade: Tiger·tec Silver / WMP20S Chipbreaker: MM5 Numbers / Core technical data Insert designation: CNMG120404-MM5 WMP20S Insert size: 12 Thickness code: 04 Nose radius: 0.4 mm Relief / rake: 0° (negative) Insert shape: Rhombus 80° Special features Coating: Tiger·tec Silver Carbide grade: WMP20S (coated carbide) Application group: ISO M (rostfreie Stähle) Intended use: medium to robust cutting conditions Execution/design: G FAQ What materials is this insert intended for? The CNMG120404-MM5 WMP20S insert is designed primarily for machining stainless steels (ISO M) and provides stable performance where adhesion and heat generation are critical factors. How does the MM5 chipbreaker influence machining? The MM5 chipbreaker promotes predictable chip formation and evacuation in demanding stainless steel cuts, reducing chip entanglement and improving process stability for the CNMG120404-MM5 WMP20S. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating enhances oxidation resistance and edge stability at raised temperatures, helping the WMP20S grade to maintain a consistent cutting edge and prolong usable life. Which cutting conditions suit the rhombic 80° geometry best? The rhombic 80° form with a 0.4 mm nose radius and 0° negative rake is well suited to mixed operations between finishing and semi‑finishing, where mechanical strength and predictable chip behaviour are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Markenhinweis: Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com