CNMG120404-MM5 WMP30G Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Gold coating and the MM5 chipbreaker, this insert ensures stable chip control and reliable edge life when machining rostfreier Stahl; order directly via Metav Werkzeuge or consult our application specialists for optimal cutting data. CNMG120404-MM5 WMP30G — Turning indexable insert, Rhombus 80°, 0° negative rake — Walter Tools CNMG120404-MM5 WMP30G is an indexable turning insert designed for robust performance when machining rostfreier Stahl under medium to demanding conditions. Tiger·tec Gold coated carbide grade WMP30G Optimised MM5 chipbreaker for stable chips Rhombic 80° geometry for versatile turning 0.4 mm corner radius for repeatable edge strength Improved cutting reliability for rostfreier Stahl machining The combination of the Tiger·tec Gold coating with the WMP30G grade provides a balanced wear resistance and toughness necessary for machining rostfreier Stahl, materials that tend to be tough and generate heat. The insert’s MM5 chipbreaker supports controlled chip formation, reducing the risk of built-up edge and simplifying chip evacuation in interrupted or continuous cuts. As a result, cycle times can be stabilised and tool life extended, which contributes directly to more predictable production planning and less scrap. Geometry that delivers consistent surface finish and repeatability The Rhombus 80° shape with a 0° (negative) rake creates a geometry focused on edge strength and stability. The 0.4 mm corner radius helps to spread cutting forces over a larger edge area, which improves resistance to chipping and enables more consistent surface quality across batches. For operations where repeatability and dimensional stability are essential, this insert’s geometry reduces the need for frequent tool changes and rework, supporting higher first-pass yield in serial turning tasks. Process security and productivity in series production Coated carbide construction and the design features of this insert are aimed at providing process security in demanding turning environments. The solidly coated substrate and the Tiger·tec Gold technology aid in maintaining a stable cutting edge under thermal and mechanical stress, making the product suitable for subcontractors and production shops focused on uptime and throughput. Compatibility with standard toolholders and straightforward indexable replacement reduce machine downtime; paired with adapted cutting data, the insert supports efficient, repeatable machining cycles. Contact Metav Werkzeuge for tailored recommendations on Tiger·tec Gold inserts for rostfreier Stahl machining or request cutting-parameter advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: CNMG120404-MM5-WMP30G-WALTER Designation: CNMG120404-MM5 WMP30G Shape: Rhombus 80° Corner radius: 0.4 mm Rake: 0° (negative) Chipbreaker: MM5 Thickness code: 04 Size code: 12 Grade/series: Tiger-tec Gold / WMP30G Facts Coating: Tiger·tec Gold Substrate: coated carbide Material group: rostfreier Stahl Suitable cutting scenario: medium to robust conditions Application ISO group: M Special features Stable chip formation via MM5 chipbreaker Designed for edge strength and repeatable life Robust performance under thermal stress Optimised for rostfreier Stahl machining Walter Tools quality and production focus FAQ What materials is this insert suitable for? The CNMG120404-MM5 WMP30G insert is designed primarily for machining rostfreier Stahl; the WMP30G grade supports stable chip formation and edge life in these materials. How does the MM5 chipbreaker affect machining? The MM5 chipbreaker on this Walter Tools insert promotes controlled chip breakage and evacuation, which improves process stability and reduces the likelihood of built-up edge when turning rostfreier Stahl. What benefits does the Rhombus 80° geometry provide? Rhombic 80° geometry offers versatility in turning operations, combining accessibility for various turning paths with robust edge support to resist chipping during moderate interruptions. Can the insert withstand high thermal loads? The Tiger·tec Gold coating and coated carbide substrate of the WMP30G grade are engineered to maintain process security under elevated temperatures typical for rostfreier Stahl cutting, supporting consistent tool life. Is the corner radius suitable for finishing operations? The 0.4 mm corner radius balances edge strength and surface finish; it is appropriate for many semi-finish and finishing passes where a stable edge and repeatable results are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned solely for explanation; there is no affiliation between Metav Werkzeuge and the referenced manufacturers. Walter Tools is a brand of the Walter AG group.
CNMG120404-MM5 WSM10S WSM10S Wendeplatten - Walter Tools
The combination of a Tiger·tec Silver coating and the WSM10S grade delivers dependable wear resistance and stable chip formation for demanding turning applications; the MM5 chipbreaker and 0.4 mm corner radius further enhance process stability. Order directly via Metav Werkzeuge or request application guidance from the consultants for seamless integration into existing turning processes. CNMG120404‑MM5 WSM10S indexable turning insert, Tiger‑tec Silver – for rostfreier Stahl & superalloys, Walter Tools A CNMG120404‑MM5 WSM10S indexable insert designed for robust turning of rostfreier Stahl and heat‑resistant superalloys, offering a rhombus 80° form and optimised chip control for secure machining. Tiger·tec Silver coating for extended tool life MM5 chipbreaker for consistent chip control Rhombus 80° form for versatile turning operations Suitable for rostfreier Stahl and superalloys Consistent performance when machining tough alloys The combination of the WSM10S grade and the Tiger·tec Silver coating ensures reliable cutting performance in challenging materials such as rostfreier Stahl and high‑temperature superalloys. The coated carbide substrate improves thermal stability and reduces adhesion at the cutting edge, which in turn supports predictable tool life and surface finish. For production environments where repeatability and low downtime are essential, this insert provides a stable basis for process planning and reduces unscheduled tool changes. Geometry and chip control that stabilise the cut With a Rhombus 80° shape and a 0.4 mm corner radius, the insert balances strength and edge precision to withstand interrupted cuts while maintaining acceptable surface integrity. The MM5 chipbreaker has been developed to form manageable chips in sticky, tough materials, lowering the risk of built‑up edge and improving evacuation. The negative 0° (negative) clearance contributes to a robust cutting geometry that resists edge chipping in heavy engagement scenarios, making the insert suitable for medium to heavy roughing as well as finishing passes. Material suitability and economic advantages The insert’s designation targets both rostfreier Stahl (ISO group M) and heat‑resistant alloys (ISO group S), reflecting a grade optimised for difficult‑to‑cut workpieces where heat generation and chip formation are critical. By combining a wear‑resistant coating with a stable chipbreaking geometry, the component reduces the frequency of index changes and supports longer cutting intervals. This leads to improved process economy through reduced tool consumption and more consistent production output. Simple specification and integration into production Available in the standard CNMG size with a plate thickness of 04 and a tolerance class M, the insert fits conventional CNMG toolholders and clamping systems. The standardised dimensions and the clear designation simplify tooling logistics and allow straightforward substitution into existing assortments. For process engineers, the insert provides a predictable platform for developing cutting data and toolpaths when machining corrosion‑resistant and high‑temperature alloys. Contact Metav Werkzeuge for technical matching and order support when specifying the Walter Tools CNMG120404‑MM5 WSM10S insert for rostfreier Stahl and superalloy applications Technical Data SKU: CNMG120404-MM5-WSM10S-WALTER Product type: Drehwendeschneidplatte (indexable turning insert) Designation: CNMG120404‑MM5 Full designation: CNMG120404‑MM5 WSM10S Brand: Walter Tools Core Specifications Plate form: Rhombus 80° Inscribed circle / size: 12 Corner radius: 0.4 mm Plate thickness: 04 Clearance angle: 0° (negative) Tolerance class: M Materials & Special Features Series: Tiger·tec Silver Grade: WSM10S Coating: coated carbide (Tiger·tec Silver) Chipbreaker: MM5 Material suitability: rostfreier Stahl (M), superalloys / titanium (S) Execution: G FAQ What materials is this insert suited for? The CNMG120404‑MM5 WSM10S insert is suited for rostfreier Stahl (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), reflecting the WSM10S grade’s focus on stable chip formation and thermal resistance. What benefit does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating enhances thermal stability and wear resistance on the insert, allowing the WSM10S grade to maintain a sharper edge for longer in high‑temperature cutting conditions. How does the MM5 chipbreaker affect machining? The MM5 chipbreaker produces compact, controllable chips in sticky and tough materials, reducing built‑up edge and improving chip evacuation for safer, more consistent turning operations. Is the geometry suitable for both roughing and finishing? The Rhombus 80° form with a 0.4 mm corner radius offers a compromise between strength and finish capability, making the insert appropriate for medium to heavy roughing and for finishing passes when programmed accordingly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG120404-MM5 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Silver coating and the WSM20S grade for stable cutting edges in the machining of stainless steel and heat‑resistant alloys, plus the MM5 chipbreaker for consistent chip control; order genuine inserts via Metav Werkzeuge or contact our consultants for application advice. CNMG120404‑MM5 WSM20S indexable turning insert, Tiger·tec Silver coating — Walter Tools The CNMG120404‑MM5 WSM20S is a rhombic 80° indexable turning insert designed for demanding turning operations on stainless steel and heat‑resistant superalloys and titanium, offering a balanced combination of thermal resistance and edge stability. Tiger·tec Silver coating for thermal stability MM5 chipbreaker for reliable chip control Rhombic 80° form with 0.4 mm corner radius Optimised for stainless steel and superalloys Consistent edge life through advanced coating technology The combination of the Tiger·tec Silver technology and the WSM20S grade provides enhanced thermal resistance and wear behaviour during the machining of stainless steel and heat‑resistant alloys. The specialised coating reduces adhesive wear and helps to prevent built‑up edge formation, which translates into longer tool life and fewer interruptions for index changes. For production environments where heat generation and material toughness challenge conventional grades, this insert offers a measurable improvement in process stability and repeatable part quality. Geometry and chip control for predictable surface finish The rhombic 80° outline and MM5 chipbreaker are engineered to deliver controlled chip formation and consistent cutting forces. The negative 0° clearance angle and 0.4 mm corner radius support robust edge strength and help to absorb intermittent loads typical of groove entries or interrupted cuts. As a result, surface integrity and dimensional stability improve while tool change frequency is reduced. These geometric choices make the insert particularly suited to applications that prioritise repeatability and low scrap rates. Integration into high‑performance turning processes With tolerance class M and a standardised format (CNMG120404‑MM5), the insert fits established clamping systems and offers predictable performance when paired with appropriate tool holders. The S / M material designation confirms suitability for both superalloys/titanium and stainless steel, enabling consolidation of tooling in mixed‑material production. Using this insert supports process optimisation through fewer tool variants, improved machine uptime and stable cycle times, which together contribute to lower unit costs and higher throughput. For reliable supply and application support for Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 — for availability and tailored recommendations. Technical data Article number: CNMG120404-MM5-WSM20S-WALTER Label: Drehwendeschneidplatte CNMG120404-MM5 WSM20S Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Size (inscribed circle): 12 mm Corner radius: 0.4 mm Thickness: 04 Clearance angle: 0° (negative) Tolerance class: M Special features Grade: WSM20S Chipbreaker: MM5 Form: Rhombic 80° Material suitability: S / M Applicable material: stainless steel (M) Execution: G FAQ What materials can this insert machine effectively? The CNMG120404‑MM5 WSM20S is formulated for machining stainless steel (M) and heat‑resistant superalloys/titanium (S), combining thermal resistance with edge stability. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating on the WSM20S grade reduces adhesive wear and improves heat resistance, which enhances tool life when machining tough, heat‑generating materials. What benefit does the MM5 chipbreaker provide? The MM5 chipbreaker promotes controlled chip formation and evacuation, resulting in more consistent surface finishes and reduced risk of chip entanglement. Is the negative 0° clearance angle suitable for roughing operations? Yes — the negative 0° clearance increases edge robustness and is suitable for heavy or interrupted cuts where edge strength is critical. Which tolerance class applies and why is it relevant? Tolerance class M indicates manufacturing consistency; it supports predictable fitment in tool holders and reliable repeatability in production. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and product names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation. The described article is an original, brand‑new product from the manufacturer Walter Tools.
CNMG120404-MM5 WSM30S WSM30S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating and the MM5 chipbreaker ensures extended tool life and stable chip control for demanding materials; benefit from predictable machining and improved process security by ordering through Metav Werkzeuge or consulting their application specialists. CNMG120404-MM5 WSM30S indexable turning insert for stainless steels and superalloys — Walter Tools The CNMG120404-MM5 WSM30S is an indexable turning insert optimised for machining rostfreie Stähle and heat‑resistant superalloys, offering a robust geometry for reliable production machining. Tiger·tec Silver coating for wear resistance Optimised for rostfreie Stähle and superalloys Rhombic 80° shape with 0.4 mm corner radius MM5 chipbreaker for controlled chips Longer tool life and consistent cutting on demanding alloys The combination of the Tiger·tec Silver coating and the WSM30S carbide grade delivers wear resistance and thermal stability in continuous production environments. Coated carbide provides a hard outer layer that resists abrasion while the substrate retains toughness; this reduces edge breakdown and extends service intervals. For shops working with rostfreie Stähle and heat‑resistant alloys, that means fewer tool changes, less unplanned downtime and improved machine availability. The result is a measurable increase in process reliability and predictable component quality under challenging cutting conditions. Predictable chip control and improved surface finish The Rhombic 80° geometry combined with a 0.4 mm corner radius and the MM5 chipbreaker produces stable chip formation and consistent cutting forces. A negative clearance angle of 0° (negative rake) supports a robust cutting edge, which is particularly advantageous when dealing with sticky materials that tend to build up on the tool. Stable chip control reduces entanglement and improves swarf evacuation, helping to protect the workpiece surface and the toolholder. This geometry is suited to applications where a balance of edge strength and surface integrity is required, giving a reliable finished surface with minimal rework. Seamless integration into productive turning operations Designed to fit ISO CNMG indexable toolholders, the insert’s standard form factor simplifies integration into existing toolsets and fixtures. The MM5 chipbreaker and the coated grade enable versatile use across finishing and more demanding semi‑finishing tasks, supporting higher cutting parameters where process security is essential. Walter Tools’ engineering focus on consistent cutting edge quality promotes repeatable performance across batches, which supports lean production goals. When combined with appropriate toolholder selection and cutting data, this insert contributes directly to higher throughput and lower overall machining costs. For advice on selecting the right grade or to order Walter Tools inserts from Metav Werkzeuge, contact Metav Werkzeuge for tailored application support and recommendations. Technical data SKU: CNMG120404-MM5-WSM30S-WALTER Article designation: CNMG120404-MM5 WSM30S Product type: Indexable turning insert Series: Tiger·tec Silver Grade: WSM30S Manufacturer: Walter Tools Core dimensions & tolerances Insert size: 12 Corner radius: 0,4 Thickness: 04 Clearance/freer angle: 0° (negativ) Tolerance class: M Designs & special features Insert shape: Rhombus 80° Chipbreaker: MM5 Substrate / coating: coated carbide (Tiger·tec Silver) Material suitability: S / M Application focus: rostfreie Stähle and heat‑resistant superalloys (tough‑to‑machine materials) FAQ What materials is this insert suited for? The CNMG120404-MM5 WSM30S insert is specified for rostfreie Stähle and heat‑resistant superalloys, making it suitable where thermal and adhesive tool wear are primary concerns. How does the MM5 chipbreaker affect machining? The MM5 chipbreaker on this Walter Tools insert promotes short, controlled chips and steady cutting forces, which improves swarf evacuation and reduces the risk of workpiece damage. Is the insert compatible with standard CNMG toolholders? Yes, the CNMG120404-MM5 geometry follows ISO CNMG conventions and fits standard CNMG indexable toolholders when the holder matches the insert size. What advantage does the Tiger·tec Silver technology provide? Tiger·tec Silver coating enhances wear resistance and thermal stability on the cutting edge; for the WSM30S grade this means improved tool life and more stable cutting under elevated temperatures. Can this insert be used for finishing and semi‑finishing operations? The combination of the 0.4 mm corner radius and MM5 chipbreaker makes the insert versatile for both finishing and certain semi‑finishing tasks, depending on cutting data and workpiece material. Manufacturer/Responsible: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original factory‑new product of the manufacturer Walter Tools.
CNMG120404-MP3 WPP10G WPP10G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the MP3 chipbreaker delivers extended tool life and reliable chip control, enabling consistent productivity when machining steel. With a rhombic 80° form and a 0.4 mm corner radius, the insert offers versatile turning performance with secure clamping. Order the CNMG120404-MP3 WPP10G directly via Metav Werkzeuge or consult our specialists for machining recommendations. CNMG120404-MP3 WPP10G — Turning insert, Tiger·tec Gold grade for steel | Walter Tools The CNMG120404-MP3 WPP10G is a rhombic 80° turning insert designed for robust steel machining with a coated carbide grade optimised for wear resistance and universal performance. Tiger·tec Gold coating for extended tool life MP3 chipbreaker for reliable chip control 0.4 mm corner radius for versatile turning Rhombic 80° shape with 0° negative relief Longer tool life through advanced coating technology The combination of Tiger·tec Gold coating and a coated carbide substrate provides a measurable improvement in wear resistance for operations on steel. This grade, identified as WPP10G, is formulated to manage the heat and chip formation typical of steel machining, reducing flank wear and extending the interval between indexings. The result is a more stable process with fewer unscheduled interruptions and better repeatability across batches. Consistent chip formation for safer production Thanks to the MP3 chipbreaker, chip control is significantly improved compared with generic geometries. Stable chips reduce the risk of tangling and machine downtime, improving operator safety and allowing for higher feed rates in many applications. The engineered chip groove promotes predictable breakage and evacuation, contributing directly to cycle-time savings and a smoother production flow. Geometry that increases versatility and component quality The rhombic 80° shape combined with a 0° negative relief offers secure clamping and good access in shoulder and general turning operations. The 0.4 mm corner radius strikes a balance between edge strength and surface finish, enabling both finishing and light roughing tasks without frequent insert changes. This geometry supports consistent surface quality while maintaining the robustness needed for shop-floor conditions. Simple specification and integration into existing toolholders The insert conforms to common CNMG designation norms and is provided in tolerance class M, easing changeover and inventory management in industrial environments. The grade’s focus on steel (ISO group P) ensures clear material suitability and reduces the need for trial-and-error selection. For job shops and production lines seeking dependable performance, this insert integrates seamlessly with standard turning toolholders and cutting strategies, supporting predictable output and process security. Contact Metav Werkzeuge for tailored machining advice and to arrange supply of the Walter Tools CNMG120404-MP3 WPP10G turning insert Technical Data Article number: CNMG120404-MP3-WPP10G-WALTER Product: Turning insert Designation: CNMG120404-MP3 WPP10G Manufacturer: Walter Tools Series: Tiger·tec Gold Core dimensions Size: 12 mm Thickness: 4.0 mm Corner radius: 0.4 mm Shape: Rhombic 80° Relief angle: 0° (negative) Features & applications Coating: Tiger·tec Gold Grade: WPP10G (coated carbide) Chipbreaker: MP3 Material application: Steel (P) Tolerance class: M FAQ Which materials is this insert optimised for? The CNMG120404-MP3 WPP10G is optimised for machining steel (ISO group P); the WPP10G grade and Tiger·tec Gold coating are tailored to the heat and chip characteristics of steel cutting. What benefits does the MP3 chipbreaker provide? The MP3 chipbreaker promotes reliable chip formation and evacuation, reducing tangling and downtime while improving process stability for turning operations with this Walter Tools insert. How does the rhombic 80° form influence application? The rhombic 80° geometry offers good access for shoulder and general turning, combined with secure clamping; paired with a 0.4 mm corner radius it suits both finishing and light roughing. Is this insert suitable for heavy interrupted cuts? With a coated carbide grade and a 0.4 mm corner radius, the insert provides enhanced edge strength; however, suitability for heavy interruptions depends on the specific machine and holder setup, so testing under working conditions is advised. What tolerance and interchangeability can be expected? The insert is supplied in tolerance class M, supporting predictable fit and interchangeability with standard CNMG-compatible toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer.
CNMG120404-MP3 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the MP3 chipbreaker for reliable, high‑productivity steel turning; the rhombic 80° geometry and 0.4 mm corner radius provide consistent edge strength and repeatable results. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. CNMG120404-MP3 WPP20G indexable turning insert — Tiger·tec Gold, MP3 chipbreaker for Steel | Walter Tools The CNMG120404-MP3 WPP20G is a rhombic 80° indexable turning insert engineered for medium to heavy-duty steel machining and designed to deliver stable chip control and long tool life. Tiger·tec Gold coating for improved wear resistance MP3 chipbreaker optimised for steel turning Rhombic 80° form for versatile cutting angles 0.4 mm corner radius for consistent edge strength Increased productivity through optimised coating and grade The combination of the Tiger·tec Gold coating and the WPP20G grade ensures improved wear resistance and stable cutting behaviour when machining steels. This coating technology reduces flank wear and extends tool life, which translates into fewer tool changes and higher machine uptime. By using an indexable insert with a coating optimised for the heat and chip formation typical of steel turning, process stability is maximised and rework is reduced, supporting predictable production cycles and lower unit costs. Precise chip control for safer, uninterrupted machining Built with the MP3 chipbreaker, the insert delivers consistent chip segmentation and evacuation under a wide range of cutting conditions. Reliable chip control minimises chip entanglement and machine downtime, improving operator safety and surface integrity of the workpiece. The chipbreaker geometry is particularly effective in handling the swarf generated from unalloyed and alloyed steels, offering a tangible benefit in automated or batch production where uninterrupted cycles are crucial. Geometry and edge design that support repeatable results The rhombic 80° form combined with a 0.4 mm corner radius offers a balance between strength and versatility: the angle provides access to varied turning contours while the rounded corner improves edge robustness against mechanical and thermal shock. Negative 0° clearance geometry contributes to a stable cutting edge in heavy cut scenarios, resulting in fewer vibrations and a more consistent surface finish. These characteristics make the insert suitable for both roughing and mixed finishing tasks in steel applications. Integration into production and process support This insert is straightforward to integrate into existing toolholders designed for CNMG‑style indexable plates, enabling quick changeovers and consistent positioning. Using a coated carbide grade tuned for steel machining reduces set‑up experimentation: cutting parameters can be aligned with standard recommendations for coated carbide in steel, simplifying process documentation and operator training. For process optimisation or cutting‑data sheets specific to a machine and workpiece combination, Metav Werkzeuge provides technical consultancy to support cycle time and tool‑life improvements. Contact Metav Werkzeuge for application‑specific recommendations on the CNMG120404-MP3 WPP20G by Walter Tools and to request tailored cutting data for steel machining Technical Data Article number: CNMG120404-MP3-WPP20G-WALTER SKU: CNMG120404-MP3-WPP20G-WALTER Designation (no grade): CNMG120404-MP3 ISO designation: CNMG120404-MP3 WPP20G Manufacturer: Walter Tools Core specifications Plate size: 12 Plate thickness: 04 Corner radius: 0.4 mm Clearance angle: 0° (negative) Tolerance class: M Design & special features Coating family: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: MP3 Plate form: Rhombic 80° Application group: Steel (P) Execution: G (negative geometry) FAQ What materials is this insert suitable for? The CNMG120404‑MP3 WPP20G by Walter Tools is designed primarily for steel machining and its grade and coating are tuned for the thermal and chip‑formation behaviour of unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit tool life? The Tiger·tec Gold coating on the WPP20G grade reduces flank wear and improves heat resistance, which together extend the service life of the insert and help maintain stable cutting performance in serial turning operations. Which chipbreaker should be selected for mixed finishing in steel? The MP3 chipbreaker on this insert provides consistent chip segmentation suitable for a range of finishing and semi‑finishing operations in steel, offering good surface quality while ensuring reliable swarf control. Is the insert compatible with standard CNMG toolholders? Yes, the CNMG120404‑MP3 WPP20G is an indexable CNMG‑format insert and is compatible with toolholders designed for CNMG plates, enabling easy integration and repeatable seating. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mention of brand names such as Walter Tools is for identification and explanation only; there is no affiliation implied between Metav Werkzeuge and the trademark owners. The offered article is original and factory‑new from the stated manufacturer.
CNMG120404-MP3 WPP30G G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, a 0.4 mm corner radius and the MP3 chipbreaker for reliable, cost‑effective steel machining; order the insert directly via Metav Werkzeuge or request cutting data from the technical consultants. CNMG120404‑MP3 WPP30G — Turning insert, Tiger‑tec Gold coating, for steel (P) | Walter Tools The CNMG120404‑MP3 WPP30G is a rhombic 80° turning insert designed for productive steel machining, offering a robust coated carbide grade for demanding shopfloor applications Tiger‑tec Gold coating for high durability Rhombic 80° shape for versatile turning 0.4 mm corner radius for reliable edge strength MP3 chipbreaker optimised for steel High productivity through a specialised coating and grade The combination of Tiger‑tec Gold technology and the WPP30G grade provides a balance of wear resistance and toughness that is beneficial for continuous turning operations on steel. The coated carbide substrate reduces flank wear at elevated cutting speeds, which extends tool life and lowers the frequency of insert changes. This results in improved process stability and a favourable cost‑per‑component metric for batch and serial production. Geometry that supports secure machining and consistent accuracy A rhombic 80° geometry paired with a 0.4 mm corner radius delivers a compromise between edge strength and the ability to achieve close tolerances. The negative 0° clearance helps to maintain a stable cutting edge under interrupted cuts and higher feed rates, reducing the risk of edge chipping. These design choices support repeatable dimensional accuracy and a steady surface quality when tackling a range of turning tasks. Controlled chip formation for better surface finish and safety The MP3 chipbreaker is optimised for steel and promotes predictable chip segmentation and evacuation. Controlled chip form reduces the likelihood of long, entangling swarf and contributes to a cleaner working environment and safer tool handling. Improved chip control also aids in achieving a finer surface finish, which can reduce downstream finishing effort and improve overall part quality. Suitable applications and practical recommendations This insert is intended for general steel turning under medium to heavy cutting conditions, where a balance of wear resistance and toughness is required. The combination of WPP30G grade and the MP3 breaker is particularly effective for unalloyed and alloyed steels that exhibit typical heat generation and chip behaviour during machining. For optimal results with specific machine setups and workpiece materials, refer to the toolholder compatibility and cutting data provided by Metav Werkzeuge. For reliable high‑productivity turning with Walter Tools’ Tiger‑tec Gold grade, contact Metav Werkzeuge for tailored cutting data and stock availability Technical data Article number: CNMG120404-MP3-WPP30G-WALTER Designation: CNMG120404-MP3 WPP30G Type: Turning insert (indexable) Brand: Walter Tools Core specifications Geometry: Rhombic 80° Corner radius: 0.4 mm Thickness: 04 Size: 12 Rake/clearance: 0° (negative) Features / Applications Coating/grade: Tiger‑tec Gold / WPP30G Chipbreaker: MP3 Material application: Steel (P) Tolerance class: M FAQ Which materials is this insert designed for? The CNMG120404‑MP3 WPP30G insert is optimised for machining steel (ISO group P), with the grade engineered to handle the heat and chip formation typical of unalloyed and alloyed steels. What does the MP3 chipbreaker provide in practice? The MP3 breaker on this indexable insert promotes controlled chip segmentation and safe chip evacuation, which improves surface finish and reduces downtime for swarf management when turning steel. How does the 0.4 mm corner radius affect machining performance? A 0.4 mm corner radius increases edge strength and resistance to chipping during heavier cuts, contributing to steadier tolerances and longer effective tool life for this Walter Tools turning insert. Is the Tiger‑tec Gold coating suitable for higher cutting speeds? Yes, the Tiger‑tec Gold coating on the WPP30G grade enhances wear resistance, allowing for elevated cutting speeds while maintaining stable flank wear behaviour and consistent component quality. Can this insert be used for finishing operations? The design and grade of the CNMG120404‑MP3 WPP30G are primarily targeted at medium to heavy turning; finishing is possible with appropriate feeds and speeds, but fine‑finish specific grades may offer superior surface results for dedicated finishing passes. The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners and are mentioned solely for explanatory purposes; there is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
CNMG120404-MP5 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the MP5 chipbreaker for extended tool life and dependable chip control; the robust Rhombic 80° geometry and 0.4 mm corner radius ensure consistent surface quality and process stability. Order the insert directly via Metav Werkzeuge or ask the consultants for application support. CNMG120404-MP5 WPP10G indexable turning insert, Tiger·tec Gold coating – for steel | Walter Tools The CNMG120404-MP5 WPP10G is a rhombic 80° indexable turning insert engineered for reliable steel turning with a Tiger·tec Gold coated, MP5 chipbreaker design. Tiger·tec Gold coated for extended tool life Rhombic 80° geometry for versatile turning 0° negative rake for stable cutting action 0.4 mm corner radius for controlled finish MP5 chipbreaker for consistent chip control Greater process reliability through modern coating technology The Tiger·tec Gold coating combined with the WPP10G grade delivers a coated carbide construction that is optimised for the thermal and mechanical demands of machining steel (ISO P). This results in enhanced wear resistance and a more consistent cutting edge over longer production runs. In practice, fewer tool changes are required, leading to uninterrupted machining cycles and improved throughput. The described coating technology also supports improved surface quality by maintaining edge integrity under sustained loads. Precise chip control and surface finish from geometry and chipbreaker The Rhombic 80° form and the MP5 chipbreaker work together to provide controlled chip formation and reliable evacuation during turning operations. A 0.4 mm corner radius affords a balance between strength and finish, helping to reduce vibration and prevent premature edge chipping. The 0° negative rake contributes to cutting stability in heavier cuts and interrupted machining, making the insert suitable for both finishing and more demanding light-roughing tasks where process security and repeatability are priorities. Economical performance and application versatility for steel machining Designed for machining steel, the insert’s specification supports a broad range of applications: the WPP10G sort offers a mix of wear resistance and toughness for versatile use across many steel grades. The combination of coating, chip control and robust geometry reduces tool consumption and can lower overall component cost per part. For production environments seeking consistent component quality and predictable tool life, this insert provides a technically straightforward solution that improves productivity while maintaining surface integrity and dimensional reliability. For application advice or to secure supply of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored recommendations and rapid delivery. Technical data Article number: CNMG120404-MP5-WPP10G-WALTER Designation: CNMG120404-MP5 WPP10G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Insert form: Rhombic 80° Corner radius: 0.4 mm Relief angle: 0° (negative) Chipbreaker: MP5 Plate size: 12 Plate thickness: 04 Grade/sort: WPP10G Tolerance class: M Special features Coating technology: Tiger·tec Gold Material base: coated carbide Primary application: steel (ISO P) Balanced wear resistance and toughness Designed for stable chip formation and process security FAQ Which materials is this insert intended for? The CNMG120404-MP5 WPP10G is primarily intended for machining steel, classified under ISO group P. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WPP10G grade enhances wear resistance and edge stability, extending service life under the thermal stresses typical of steel turning. How does the MP5 chipbreaker influence machining? The MP5 chipbreaker on this insert promotes consistent chip formation and evacuation, improving process reliability and surface finish during continuous turning operations. Is the insert suitable for finishing or roughing operations? Thanks to its combination of a 0.4 mm corner radius, 0° negative rake and robust coating, the CNMG120404-MP5 WPP10G is versatile and can be used for finishing and certain light-roughing tasks where stability is required. Which toolholders accept this geometry? Inserts with the CNMG designation fit toolholders designed for CNMG geometry; the CNMG120404-MP5 WPP10G will work with standard CNMG-compatible turning toolholders. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Mark names and protected trademarks are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
CNMG120404-MP5 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WPP20G carbide grade combined with the MP5 chipbreaker for dependable machining of steel; the result is efficient throughput and consistent edge life. Order the insert directly via Metav Werkzeuge or consult our experts for application-specific recommendations. CNMG120404-MP5 WPP20G — CNMG indexable turning insert, Tiger·tec Gold, Walter Tools CNMG120404-MP5 WPP20G is an indexable turning insert designed for reliable steel machining in turning applications Tiger·tec Gold coating for extended tool life Robust MP5 chipbreaker for predictable chip control Suitable for steel (ISO 513) machining Rhombic 80° geometry for stable cutting Durable coating and grade for longer service life The combination of the Tiger·tec Gold coating and the WPP20G coated carbide grade provides improved wear resistance and thermal stability during turning operations on steel. This engineered surface reduces flank and crater wear, so edge integrity is maintained over longer cycles; as a result, operators benefit from fewer tool changes and less downtime. Explaining the term: a coated carbide combines a hard tungsten‑carbide substrate with one or more engineered surface layers to withstand heat and abrasion, which supports consistent component quality in serial production. Predictable chip control and stronger cutting edge Equipped with the MP5 chipbreaker and a 0.4 mm corner radius, the insert balances chip formation and edge strength for a broad range of cutting conditions. The chipbreaker geometry assists in producing short, controllable chips in many steel turning tasks, lowering the risk of entanglement and stabilising the cutting process. The modest corner radius increases resistance to edge chipping while keeping cutting forces manageable, which supports steady surface finish and tool life. Geometry tuned for secure engagement and compatibility The Rhombus 80° form and a 0° (negative) rake angle create a robust cutting geometry that suits heavier engagement and common CNMG toolholder systems. The insert dimensions — 12 mm across the cutting edge with a 4 mm nominal thickness — mean straightforward replacement in standard turning toolblocks, ensuring mechanical stability during interrupted or continuous cuts. Together, these geometric traits promote process reliability and repeatable part quality in workshop environments. Designed for productivity and consistent results With a focus on efficient material removal and repeatable outcomes, the Tiger·tec Gold series and the WPP20G specification deliver a versatile solution for various steels under ISO 513 classifications. The insert’s combination of coating, grade and chipbreaker supports higher uptime and predictable wear behaviour, helping production planners reduce variability and maintain cycle times. From batch work to demanding single‑piece flows, the design intent is to secure machining performance and lower total tooling effort. For technical selection or application advice on Walter Tools CNMG120404-MP5 WPP20G inserts, contact Metav Werkzeuge for expert guidance and rapid supply coordination Technical data SKU: CNMG120404-MP5-WPP20G-WALTER Product designation: CNMG120404-MP5 WPP20G Product type: Drehwendeschneidplatte / indexable turning insert Brand: Walter Tools Series: Tiger‑tec Gold Grade: WPP20G Facts Insert size: 12 mm Thickness: 4 mm Corner radius: 0.4 mm Rake angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: MP5 Shape: Rhombus 80° Material application: steel (ISO 513) Execution: G FAQ Is this insert suitable for general steel turning tasks? Yes. The WPP20G grade and Tiger·tec Gold coating are formulated for steel machining according to ISO 513, and the CNMG120404‑MP5 geometry supports a wide range of turning applications. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the CNMG120404‑MP5 improves wear resistance and thermal stability, extending the service life and maintaining surface quality across longer production runs. How does the MP5 chipbreaker affect machining? The MP5 chipbreaker promotes predictable chip formation and evacuation in steel turning, contributing to safer and more consistent machining cycles with fewer interruptions. Which toolholders are compatible with this insert format? The CNMG form is compatible with standard CNMG indexable turning toolholders; the Rhombus 80° geometry and 12 mm size match common industry toolblocks for secure clamping. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named manufacturers; the offered product is an original, factory‑new item of the stated manufacturer. Walter Tools is a globally recognised brand of precision tooling within the metalworking industry.
CNMG120404-MP5 WPP30G WPP30G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the MP5 chipbreaker for extended tool life and dependable chip control; optimised for steel machining, the insert supports consistent productivity and fewer tool changes. Order the CNMG120404-MP5 WPP30G directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. CNMG120404-MP5 CNMG120404-MP5 WPP30G indexable turning insert for steel — Walter Tools The CNMG120404-MP5 WPP30G is a rhombic 80° indexable turning insert with Tiger‑tec Gold coating, engineered for efficient machining of steel under ISO P conditions. CNMG120404-MP5 WPP30G by Walter Tools Tiger‑tec Gold coating for extended tool life MP5 chipbreaker for reliable chip control Rhombic 80° shape, 0.4 mm corner radius Consistent productivity through advanced coating The round-the-clock demand of production requires tools that last and perform predictably. The Tiger‑tec Gold coating on this insert increases wear resistance and maintains cutting-edge integrity over longer production runs, reducing the frequency of tool changes. For operations focused on throughput, this translates into lower downtime and a better cost-per-part ratio. The grade WPP30G is developed for a wide range of steel turning tasks and balances toughness with hardness to resist abrasive and adhesive wear during continuous cutting. Predictable chips and improved process stability Controlled chip formation is essential to maintain cycle times and avoid interruptions. The MP5 chipbreaker is designed to produce compact, manageable chips when machining steel, improving workplace safety and reducing the need for manual chip handling. By stabilising the cutting process, the insert supports consistent surface quality and fewer interrupted cycles, which is especially important for automated and lights-out machining where unattended reliability is required. Geometry tailored to strength and finish The rhombic 80° form combined with a 0.4 mm corner radius delivers a balance between edge strength and the ability to produce good surface finishes. The moderately sized corner radius increases resistance to edge chipping under interrupted cuts while still allowing acceptable finish levels on general turning operations. The insert’s negative 0° relief design provides robust cutting geometry for heavier cuts and enhances stability on rigid toolholders, making it suitable for a variety of general turning applications in steel. Practical application guidance and compatibility This insert is specified for ISO P materials, covering unalloyed and alloyed steels typically encountered in production environments. The CNMG geometry is widely supported by standard toolholders, and the insert’s tolerance class M ensures consistent seating and repeatability in serial production. For selection of cutting parameters, reference the machine and workpiece rigidity: the coating and chipbreaker support a pragmatic balance of speed and feed that favours productivity without sacrificing tool life. For application-specific parameter suggestions, Metav Werkzeuge can provide tailored recommendations. Contact Metav Werkzeuge today for tailored advice on Walter Tools Tiger‑tec Gold inserts such as the CNMG120404-MP5 WPP30G and secure a reliable supply for ongoing production Technical data SKU: CNMG120404-MP5-WPP30G-WALTER Article name: CNMG120404-MP5 WPP30G Product type: indexable turning insert Series: Tiger‑tec Gold Grade: WPP30G Manufacturer: Walter Tools Core measurements Size designation: 12 Thickness designation: 04 Corner radius: 0.4 mm Relief angle: 0° (negative) Tolerance class: M Special features Coating: Tiger‑tec Gold Chipbreaker: MP5 Insert form: Rhombic 80° Designation without grade: CNMG120404-MP5 Application group: ISO P (steel) Execution: G (negative) FAQ Which materials is this insert suitable for? The CNMG120404-MP5 WPP30G from Walter Tools is specified for ISO P materials and is suitable for machining unalloyed and alloyed steels commonly used in industrial turning. What advantages does the Tiger‑tec Gold coating offer? The Tiger‑tec Gold coating on the Walter Tools insert improves wear resistance and thermal stability, extending tool life and helping to maintain consistent cutting performance across longer production runs. How does the MP5 chipbreaker affect machining behaviour? The MP5 chipbreaker provides reliable chip control, producing compact chips that ease evacuation, reduce the risk of entanglement and support a steadier cutting process, which benefits surface quality and process stability. What does the 0° negative relief mean in practice? A 0° negative relief creates a robust cutting edge that resists deformation and supports heavier cutting conditions; on the CNMG120404-MP5 WPP30G this increases stability for roughing and interrupted cuts. Is the insert compatible with standard CNMG toolholders? Yes, the geometry is a standard CNMG format and is compatible with widely used CNMG toolholders; the tolerance class M ensures consistent seating and repeat accuracy. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; info@walter-tools.com Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for clarification only. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
CNMG120404-MS3 WMP20S WMP20S Wendeplatten - Walter Tools
The combination of a Tiger·tec Silver coated grade and an MS3 chipbreaker provides stable chip control and extended edge life for stainless steel turning; this results in reliable, productive machining with predictable regrinds. Order directly via Metav Werkzeuge or request expert advice if required. CNMG120404-MS3 WMP20S – Indexable turning insert, Tiger·tec Silver coating, for stainless steel (Walter Tools) The CNMG120404-MS3 WMP20S is an indexable turning insert engineered for dependable machining of stainless steel under medium to robust cutting conditions, combining a wear-resistant coated grade with a controlled chipformer. Tiger·tec Silver coated carbide grade WMP20S Optimised MS3 chipbreaker for stable chips Rhombic 80° form with 0.4 mm corner radius Negative 0° relief for robust cutting Consistent chip control for stainless steel machining The combination of the WMP20S grade and the Tiger·tec Silver coating focuses on maintaining a stable cutting edge when machining rostfreier Stahl. Coated carbide improves surface hardness and heat resistance, which reduces edge breakdown and supports continuous production runs. The integrated MS3 chipbreaker is designed to produce short, controlled chips during turning, lowering the risk of built-up edge and improving process reliability. For operations where material ductility and heat generation challenge tool life, this insert provides a technical solution that translates directly into fewer interruptions and steadier throughput. Geometry that balances strength and precision The rhombic 80° insert form and 0.4 mm corner radius deliver a balance between a robust cutting edge and acceptable surface finish. The rhombic geometry enables flexible tool approach angles while the modest corner radius supports dimensional stability on interrupted cuts and roughing passes. The negative 0° relief offers a stronger cutting wedge for heavier or less predictable conditions, making the insert suitable where durability is prioritised. These geometric choices reduce vibration and help maintain consistent component tolerances in serial turning. Durable coating and grade for longer edge life The insert’s coated grade, part of the Tiger·tec Silver series, brings layered protection that resists abrasive and adhesive wear typical of stainless-steel turning. The coating system supports thermal stability at the cutting edge and helps prevent rapid flank wear when temperatures rise. Together with a modern carbide substrate, this technology extends the useful life of the insert and increases the interval between indexings or regrinds. The net effect is improved process economy: more components per index and fewer tool changes over a production shift. Practical handling and application notes for the workshop The ISO designation CNMG120404 indicates an industry-standard insert form that fits commercially available CNMG toolholders; this simplifies stocking and toolholder management. The insert is intended primarily for turning applications on rostfreier Stahl in medium to robust cutting regimes and pairs well with stable setups that exploit its MS3 chip control. When selecting cutting parameters, prioritise steady feed and controlled depth of cut to make the most of the insert’s wear resistance and chipforming characteristics. For revised cutting strategies or unusual alloys, consult process data to adapt speeds and feeds to the specific stainless-steel grade being machined. For precise stainless-steel turning with Walter Tools’ Tiger·tec Silver inserts, contact Metav Werkzeuge for availability and tailored machining advice via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: CNMG120404-MS3-WMP20S-WALTER Designation: CNMG120404-MS3 WMP20S Product type: Indexable turning insert Manufacturer: Walter Tools Grade/Sort: WMP20S Facts Size: 12 Thickness: 04 Corner radius: 0.4 mm Relief angle: 0° (negative) Plate form: Rhombus 80° Chipbreaker: MS3 Tolerance class: M Special features Series: Tiger·tec Silver Coated carbide grade Optimised for rostfreier Stahl (stainless steel) Stable chip formation and wear resistance Suitable for medium to robust cutting conditions FAQ What materials is this insert designed for? The CNMG120404-MS3 WMP20S insert is designed primarily for machining rostfreier Stahl (stainless steel) and is optimised for medium to robust cutting conditions. How does the MS3 chipbreaker benefit production? The MS3 chipbreaker on the WMP20S grade promotes controlled, short chips that reduce the risk of built-up edge and help maintain uninterrupted machining cycles. What does the Tiger·tec Silver series provide? The Tiger·tec Silver coating increases thermal and abrasive resistance of the coated carbide, supporting longer edge life and consistent performance during stainless-steel turning. Is the CNMG120404-MS3 compatible with standard toolholders? Yes, the CNMG form is an industry ISO standard and the CNMG120404-MS3 insert fits typical CNMG toolholders used for turning operations. What advantage does the negative 0° relief offer? The negative 0° relief strengthens the cutting edge and improves robustness under heavier cuts or unstable cutting conditions, prioritising durability over extreme shear cutting. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG120404-MS3 WPP20G WPP20G Wendeplatten - Walter Tools
Rely on the combination of Tiger‑tec Gold coating and the MS3 chipbreaker for consistent chip control and extended tool life; the negative 0° geometry supports robust cutting in steel. Order the CNMG120404‑MS3 WPP20G directly via Metav Werkzeuge or consult our specialists for tailored application advice. CNMG120404-MS3 WPP20G turning insert for steel — Walter Tools CNMG120404‑MS3 WPP20G is a rhombic 80° turning insert designed for dependable and productive steel machining with Tiger‑tec Gold coating Tiger‑tec Gold coated carbide Optimised chip control MS3 breaker Rhombic 80° form, 0.4 mm corner radius Negative 0° rake for robust cuts Durable coating for longer tool life and stable productivity The combination of Tiger‑tec Gold technology and a coated carbide grade delivers a measurable improvement in wear resistance and heat management during turning operations in steel (ISO P). The chosen coating morphology reduces flank wear and helps retain a sharp cutting edge under thermal stress, which translates into higher productivity and fewer insert changes. For production environments where process stability is crucial, the coated grade supports longer tool life and more predictable maintenance cycles. Accurate chip control and surface consistency The MS3 chipbreaker is engineered to produce short, controllable chips when machining steels, reducing the risk of chip entanglement and improving operator safety. Combined with the Rhombic 80° geometry and a 0.4 mm corner radius, the insert enables consistent engagement and stable cutting forces, which help achieve repeatable component dimensions and a fine surface finish. The negative 0° rake angle enhances robustness for heavier interrupted cuts and hard-to-machine sections, making the insert suitable for mixed-production tasks where a balance of toughness and precision is required. Application range and practical guidance for steel turning This insert is classified for work in the ISO group P, meaning it is optimised for unalloyed and alloyed steels where typical heat development and chip formation occur. The designation CNMG120404‑MS3 WPP20G combines a proven insert geometry with a universal, wear‑resistant grade to suit general turning operations. Tolerance class M underlines the dimensional consistency expected from the product. For specific cutting parameters, feed‑rates and speed recommendations, technical consultation is advised to match machine capability and component requirements; Metav Werkzeuge can supply cutting data tailored to the application. Contact Metav Werkzeuge for tailored cutting data and application advice on Walter Tools' Tiger‑tec Gold CNMG120404‑MS3 WPP20G inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: CNMG120404-MS3-WPP20G-WALTER Designation: CNMG120404-MS3 WPP20G Product type: Turning insert Series: Tiger‑tec Gold Manufacturer: Walter Tools Core data Insert size: 12 mm Thickness: 4 mm Corner radius: 0.4 mm Rake angle: 0° (negative) Insert form: Rhombic 80° Tolerance class: M Features Grade: WPP20G (coated carbide, Tiger‑tec Gold) Chipbreaker: MS3 Material application: Steel (ISO P) Geometry: Negative 0° for robust cutting Execution: G FAQ What materials is this insert suited for? The CNMG120404‑MS3 WPP20G turning insert by Walter Tools is designed primarily for steel (ISO P), covering both unalloyed and alloyed steels in typical turning applications. How does the MS3 chipbreaker affect machining? The MS3 chipbreaker on the Walter Tools insert improves chip control, producing short, manageable chips that reduce entanglement and support safer, more reliable cutting cycles. What are the dimensional specifications of the insert? The insert has a 12 mm size, 4 mm thickness and a 0.4 mm corner radius; these dimensions make the insert suitable for standard CNMG toolholders and general turning operations. Is the grade suitable for high productivity applications? Yes, the WPP20G grade (Tiger‑tec Gold) provides enhanced wear resistance and thermal stability, supporting higher productivity and longer tool life in steel machining. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
CNMG120404-MS3 WS10 MS3 Wendeplatten - Walter Tools
Take advantage of a balanced combination of stability and predictable chip control provided by the WS10 coated-carbide grade and the MS3 chipbreaker in a CNMG 12 insert; the 0° negative relief and 0.4 mm corner radius support robust cutting in interrupted or heavy-turning scenarios. Order the insert directly via Metav Werkzeuge or request application advice from our consultants. CNMG120404-MS3 WS10 (CNMG120404-MS3) — Indexable Turning Insert, Rhombus 80° by Walter Tools A CNMG120404-MS3 WS10 indexable turning insert engineered for universal external turning and finishing operations, featuring a rhombic 80° geometry with MS3 chip control and a negative 0° relief for stable edge behaviour. Coated carbide grade WS10 for broad applications MS3 chipbreaker for controlled chip formation Rhombic 80° geometry for universal turning 0° negative relief for robust edge stability Robust cutting performance with consistent results The insert delivers a reliable balance between edge strength and surface finish. The WS10 coated-carbide grade, combined with the MS3 chipbreaker, is designed for stable chip formation and reduced risk of built-up edge. The 0° negative relief increases edge support and is beneficial for interrupted cuts or when toolholder rigidity is limited. The 0.4 mm corner radius helps to distribute cutting forces and improves tool life while still enabling good surface quality. For engineers assessing process stability, these design choices translate into fewer tool changes and more predictable component quality. Predictable chip control and machining efficiency Controlled chips mean fewer stoppages and safer machining. The MS3 chipbreaker is shaped to produce short, manageable chips across a range of common turning conditions; this reduces cycle interruptions and supports uninterrupted production. The coated-carbide formulation provides wear resistance and thermal stability; however, material suitability should be checked against the product matrix since grade performance is catalog dependent. When optimising feeds and speeds, expect improved repeatability and a reduced need for manual chip management when using this insert in standard tool-holder setups. Practical selection advice and application notes The rhombic 80° form offers versatility for external turning and light profiling. The insert’s codes indicate geometry and size—use holders compatible with CNMG inserts and confirm clamping seat and tolerance class M for best fit. A higher corner radius like 0.4 mm favours tool life under heavier cut depths, while the negative relief supports edge security in unstable setups. If the correct grade for a specific alloy is unclear, consult the product matrix or contact technical support for recommended cutting data. Technical guidance and order information are available via Metav Werkzeuge; product matching ensures optimal performance and tool life. Contact Metav Werkzeuge to request cutting data, availability and application guidance for Walter Tools indexable inserts via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data SKU: CNMG120404-MS3-WS10-WALTER Designation: CNMG120404-MS3 WS10 Product type: Indexable turning insert (drehwendeschneidplatte) Series: Walter Schneidstoffsorte - Serie offen Core Dimensions Size code: 12 Thickness code: 04 Corner radius: 0.4 mm Geometry: Rhombus 80° Relief angle: 0° (negative) Tolerance class: M Chipbreaker: MS3 Features & Grade Grade: WS10 (coated carbide, catalogue dependent) Base designation: CNMG120404-MS3 Execution: G Applicable for universal external turning Notes: Verify material suitability with product matrix FAQ What types of turning is this insert best suited to? The CNMG120404-MS3 WS10 insert is aimed at universal external turning tasks where a combination of edge strength and good chip control is required; its rhombic 80° form supports a variety of profiles. Which chip control behaviour can be expected from MS3? The MS3 chipbreaker on this insert promotes short, controllable chips under typical turning conditions, improving efficiency and reducing machine stoppages compared with uncontrolled chip formation. Is the WS10 grade suitable for stainless or alloy steels? WS10 is a coated-carbide grade; material suitability depends on the specific alloy and application—consult the product matrix or Metav Werkzeuge for confirmed recommendations. How does the 0° negative relief affect machining? A 0° negative relief increases edge support and stability, particularly useful in interrupted cuts or when clamping rigidity is less than ideal, helping to reduce edge chipping. What does the 0.4 mm corner radius influence in practice? A 0.4 mm corner radius provides improved tool strength and heat distribution for longer tool life while still delivering acceptable surface finish for many finishing and semi-finishing operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is part of the Sandvik group and is a recognised manufacturer of precision metalworking tools. Protected trademarks and trade names belong to their respective owners. The offered item is an original, factory-new product from the manufacturer.
CNMG120404-MS3 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of cost-effective, stable cutting performance and optimised chip control for consistent turning of resistant materials; order directly via Metav Werkzeuge or consult our specialists for tailored application advice. Drehwendeschneidplatte CNMG120404-MS3 WSM01 — Tiger‑tec Silver for rostfreier Stahl and heat‑resistant superalloys by Walter Tools CNMG120404‑MS3 WSM01 is a coated carbide indexable insert designed for demanding turning applications in rostfreier Stahl and high‑temperature alloys, offering robust edge stability and reliable chip formation for industrial production. Tiger‑tec Silver series coating WSM01 grade for difficult‑to‑cut materials MS3 chipbreaker for controlled chips Rhombic 80° geometry 0.4 mm corner radius Consistent edge life and economical production The Tiger‑tec Silver series and the WSM01 grade combine a coated carbide substrate with a geometry tuned for heavy duty turning, which leads to stable cutting edges and predictable tool life. For machining rostfreier Stahl and superalloys, the material’s tendency to form built‑up edge and generate heat is mitigated by the insert’s composition and chipformer design, reducing unscheduled downtime and contributing to a more economical process. This results in fewer insert changes and a smoother production flow while maintaining component tolerances. Geometry engineered for precision and chip control A rhombic 80° shape with a 0.4 mm corner radius and MS3 chipbreaker yields repeatable surface finishes and controlled chip breakage during semi‑finishing and finishing operations. The negative 0° rake supports stability under interrupted cuts and heavy depths of cut, which is advantageous when facing variable material properties in rostfreier Stahl batches. Explaining this simply: the combination of insert geometry and chipbreaker turns problematic swarf into short, manageable chips and helps protect the cutting edge during tough cuts. Application flexibility and process security Coated and graded for the S / M material classes, the insert suits both rostfreier Stahl (M) and heat‑resistant superalloys or titanium (S) in accordance with ISO material grouping. The MS3 chip control geometry supports reliable chip evacuation in higher temperatures, while the coating reduces wear mechanisms common in these alloys. For production environments prioritising repeatability, the insert offers a balanced compromise between machining performance and tool economy, making it suitable for series production as well as demanding single‑part jobs. Practical selection and integration advice When integrating this insert into an existing turning cell, match the insert designation and clamping system to ensure correct seating and coolant delivery. The CNMG form supports a wide range of toolholders and turning operations; selecting the appropriate feed and cutting speed for rostfreier Stahl and superalloys will maximise the benefits of the WSM01 grade. For guidance on cutting data or holder compatibility, refer to tooling documentation or consult a technical adviser to reduce trial‑and‑error and accelerate ramp‑up time. Contact Metav Werkzeuge for an expert recommendation on the Tiger‑tec Silver CNMG120404‑MS3 WSM01 insert and ensure optimal performance when machining rostfreier Stahl and superalloys Technical Data Article number: CNMG120404-MS3-WSM01-WALTER Designation: CNMG120404-MS3 WSM01 Product type: Drehwendeschneidplatte Series: Tiger‑tec Silver Grade: WSM01 Chipformer: MS3 Core dimensions Size: 12 Corner radius: 0.4 mm Free angle: 0° (negativ) Thickness code: 04 Tolerance class: M Special features Rhombus 80° plate form Coated carbide (beschichtetes Hartmetall) Suitable for rostfreier Stahl (M) and S class materials Robust edge design for poor heat conductivity alloys Designed for stable chip formation and reliable cutting performance FAQ What materials is this insert suitable for? The CNMG120404‑MS3 WSM01 insert is specified for rostfreier Stahl (ISO group M) and high‑temperature alloys/titanium (ISO group S), with the WSM01 grade tailored to ensure secure chip formation and edge stability. How does the MS3 chipbreaker affect machining? The MS3 chipbreaker creates short, controlled chips even under elevated temperatures, which improves swarf management and reduces the risk of surface damage during turning operations. Can the rhombic 80° geometry be used for finishing? Yes, the 80° rhombic form combined with a 0.4 mm corner radius supports semi‑finishing and finishing operations, delivering consistent surface quality when matched with appropriate feeds and speeds. Is the CNMG120404‑MS3 compatible with standard toolholders? The CNMG indexable form is widely supported by common turning toolholders; ensure the correct clamping and seat geometry is used to maintain insert stability and repeatability. What advantages does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating improves wear resistance and thermal stability of the coated carbide substrate, contributing to longer tool life and predictable performance in demanding materials such as rostfreier Stahl. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
CNMG120404-MS3 WSM10S WSM10S Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Silver technology and the MS3 chipbreaker, this indexable insert ensures stable chip formation and reliable performance when turning demanding materials; order directly via Metav Werkzeuge or consult our specialists for application support. CNMG120404-MS3 WSM10S — Indexable turning insert (rhombic 80°), Tiger·tec Silver, Walter Tools The CNMG120404-MS3 WSM10S is a rhombic 80° indexable insert designed for productive turning of stainless steels and heat‑resistant superalloys in industrial machining applications. Tiger·tec Silver coating for thermal resistance Designed for stainless steels and superalloys Rhombic 80° geometry for flexible turning MS3 chipbreaker for secure chip control Greater cutting reliability when machining tough alloys Equipped with the WSM10S grade of the Tiger·tec Silver series, this insert is engineered to improve process reliability in operations that demand thermal stability and edge strength. The coated carbide formulation supports consistent performance during interrupted cuts and heavier engagement, which reduces the risk of built‑up edge and premature flank wear. For production environments handling a mix of austenitic stainless steels and high‑temperature alloys, this solution offers a predictable tool life that contributes to lower downtime and fewer insert changes. Consistent chip control and surface quality The MS3 chipbreaker and rhombic 80° shape combine to provide controlled chip formation and evacuation, lowering the likelihood of tangling or re‑cutting chips. With a corner radius 0.4 mm and a negative rake (0°) geometry, the insert delivers a good compromise between edge strength and achievable surface finish. Explaining the terms: a negative rake increases cutting edge robustness under high mechanical load, while a modest corner radius helps to maintain dimensional stability and reduce vibration on slender workpieces. The result is improved component consistency and fewer rejects. Seamless integration into production workflows This indexable solution matches standard toolholders for CNMG‑format inserts and is classified for ISO material groups M (stainless steels) and S (heat‑resistant superalloys and titanium), offering broad applicability across industries such as aerospace, energy and medical device manufacturing. The insert’s design supports both heavy roughing passes and finishing operations when parameters are adapted, allowing shops to standardise on one grade for several steps in the machining sequence. For shops seeking to streamline tooling inventories, the combination of a universal geometry and a versatile grade reduces stock complexity and simplifies procurement. Process benefits, lifecycle and supplier reliability Beyond immediate cutting performance, the use of a coated hardmetal grade from Walter Tools contributes to reproducible results and extended edge life, which in turn improves overall equipment effectiveness. The insert’s tolerance class M and the proven series technology help to secure a stable cutting edge over repeated indexings, yielding predictable replacement intervals and easier process planning. For procurement and technical teams, the clear specification reduces setup variation and supports consistent productivity gains across shifts. Contact Metav Werkzeuge for tailored application advice on Walter Tools inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for machining recommendations and fast supply. Technical data Article number: CNMG120404-MS3-WSM10S-WALTER Description: Drehwendeschneidplatte / indexable turning insert CNMG120404-MS3 WSM10S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM10S Core data Inscribed circle / plate size: 12 Corner radius: 0.4 mm Rake angle: 0° (negative) Plate thickness code: 04 Tolerance class: M Special features Chipbreaker: MS3 Plate shape: Rhombus 80° Execution code: G Material suitability: S / M (heat‑resistant superalloys, titanium / stainless steels) Ideal for demanding turning and mixed finishing/roughing applications FAQ What materials is this insert suited for? The CNMG120404-MS3 WSM10S from Walter Tools is designed for ISO groups M and S, specifically stainless steels and heat‑resistant superalloys (including titanium), offering stable chip formation in these demanding materials. How does the MS3 chipbreaker improve machining? The MS3 chipbreaker promotes predictable chip segmentation and evacuation; in practice this reduces re‑cutting of chips and improves surface consistency when using the CNMG120404-MS3 WSM10S in medium to heavy turning operations. Is the negative rake suitable for interrupted cuts? Yes — the negative rake (0°) increases cutting edge strength and resistance to mechanical shock, making the insert well suited for interrupted cuts and tougher turning conditions. What does the corner radius mean for surface finish and strength? A corner radius of 0.4 mm offers a balance between improved edge robustness and achievable surface finish; it reduces the risk of edge chipping while allowing acceptable surface quality in many turning tasks. Can the grade be used for both roughing and finishing? The WSM10S grade is versatile: it performs reliably in heavier passes thanks to its coated hardmetal properties, while also producing satisfactory finishes when feeds and speeds are adjusted appropriately. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, brand‑new product from the manufacturer.
CNMG120404-MS3 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance, the WSM20S carbide grade and the MS3 chipbreaker for reliable chip control and stable cutting-edge life; order the CNMG120404-MS3 WSM20S insert directly via Metav Werkzeuge or request consultancy for application matching. CNMG120404-MS3 WSM20S Tiger·tec Silver indexable insert – Rhombic 80°, 0° negative rake (Walter Tools) The CNMG120404-MS3 WSM20S is an indexable turning insert engineered for machining stainless steels and heat‑resistant superalloys, offering a robust coated‑carbide grade within the Tiger·tec Silver series. Tiger·tec Silver coating WSM20S For stainless steels & superalloys Rhombic 80° form, negative 0° rake MS3 chipbreaker for controlled chips High-performance grade for challenging materials The WSM20S grade, part of the Tiger·tec Silver family, is a coated carbide engineered for difficult‑to‑cut materials. Its coating system and substrate combination deliver improved thermal stability and wear resistance, which results in longer tool life and fewer indexings in serial production. Because the grade supports secure chip formation, process stability is increased when turning tough stainless steels and heat‑resistant alloys, helping to maintain component quality during sustained runs. Geometry and chip control for consistent turning results The rhombic 80° plate shape with a 0° negative rake and a 0.4 mm corner radius provides a balance between edge strength and achievable surface finish. The MS3 chipbreaker is designed to support controlled chip segmentation under moderate cutting depths, which reduces the risk of entangling swarf and improves evacuation in confined toolpaths. When mounted in compatible toolholders, the CNMG geometry enables repeatable seating and predictable cutting forces, translating into consistent dimensional accuracy and reduced vibration. Practical benefits for workshop productivity With a tolerance class of M and execution G, this insert is produced for reliable interchangeability and stable mounting in standard tool assemblies. The combination of the coated WSM20S grade and the MS3 chipbreaker reduces downtime from premature edge failure and supports steady production rates, especially on components made from stainless steels or superalloys. Application guidance and cutting‑parameter recommendations are advised for optimising feed and speed; matching insert geometry to the turning task will maximise economy and surface quality. For tailored selection of Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge for technical matching and order support at info@metav-werkzeuge.com or by phone on +49 2822 7131930; consultants will advise on the optimum grade and geometry for the machining task. Technical Data Article number: CNMG120404-MS3-WSM20S-WALTER Designation: CNMG120404-MS3 WSM20S Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Series: Tiger·tec Silver Facts Size: 12 Thickness: 04 Corner radius: 0.4 mm Relief angle: 0° (negative) Plate form: Rhombus 80° Tolerance class: M Execution: G Chipbreaker: MS3 Special features Coated carbide grade WSM20S Material classes: S / M (superalloys, stainless steels) Stable chip formation Optimised for heavy‑duty materials Indexable turning geometry CNMG120404-MS3 Series: Tiger·tec Silver FAQ What materials is this insert suitable for? The CNMG120404-MS3 WSM20S insert is suitable for stainless steels and heat‑resistant superalloys (material classes S and M), as indicated by the WSM20S grade properties. What advantage does the Tiger·tec Silver series provide? The Tiger·tec Silver treatment combines a resilient coating and substrate to improve thermal stability and wear resistance, which extends edge life under demanding turning conditions. How does the MS3 chipbreaker affect machining? The MS3 chipbreaker promotes controlled chip formation and easier evacuation, reducing the likelihood of swarf buildup and supporting stable cutting forces in turning operations. Is the CNMG120404-MS3 geometry compatible with standard toolholders? Yes, the CNMG120404 geometry is a standard indexable insert form; correct seating and clamping in a compatible holder are required to ensure the rated performance and tolerance class M. What cutting parameters are recommended for best results? Cutting parameters depend on the workpiece material and machine rigidity; for the WSM20S grade, moderate speeds with steady feeds and appropriate coolant or dry‑cutting strategy are typically advised—Metav Werkzeuge can provide tailored recommendations. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, brand‑new product from the manufacturer Walter Tools.
CNMG120404-MS3 WSM30S WSM30S Wendeplatten - Walter Tools
Take advantage of the combination of high thermal resistance, consistent chip control and robust geometry for reliable turning of rostfreier Stahl and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult our specialists for process optimisation. CNMG120404-MS3 WSM30S indexable turning insert – Tiger‑tec Silver, for rostfreier Stahl and superalloys, Walter Tools The CNMG120404-MS3 WSM30S is a rhombic 80° indexable turning insert with a negative 0° rake, designed for demanding turning of rostfreier Stahl and heat‑resistant superalloys. Tiger‑tec Silver coating for heat resistance Suitable for rostfreier Stahl (ISO M) Rhombic 80° geometry for versatile turning MS3 chipbreaker for stable chip control Increased process reliability through thermal stability and wear resistance The Tiger‑tec Silver technology combined with the WSM30S grade delivers a coated carbide chemistry optimised for applications where heat generation and built‑up edge are critical. The coating improves thermal resistance and reduces flank wear, which means longer tool life and fewer insert changes during production. With the negative 0° rake and a stable chipbreaker, the insert provides consistent cutting forces and reduced vibration, supporting a steady machining process when working with rostfreier Stahl and other hard‑to‑machine alloys. Geometry tuned for consistent surface quality and edge life The rhombic 80° form and the 0.4 mm corner radius give a balance between form accuracy and edge strength. This geometry is suited to general turning operations where a robust cutting edge is needed without compromising on surface finish. The insert’s size and thickness deliver predictable contact conditions at the tool tip, contributing to repeatable results and simplified tool set‑up. Clear geometry choices like these reduce the need for frequent parameter adjustments and improve first‑pass yield on serial production. Practical benefits for productive turning operations By combining an advanced coating with a defined chipbreaker (MS3) and a strong cutting edge, this insert supports higher stability and predictable chip formation under mixed cutting conditions. That leads to fewer interruptions for manual clearing of chips and more continuous cutting times, increasing throughput. The result is measurable efficiency gains in component output and lower overall tooling consumption, which contributes to a better return on tooling investment in the medium term. Recommended applications and material scope This insert is particularly intended for turning of rostfreier Stahl (ISO M) and is also suitable for certain heat‑resistant superalloys and titanium (ISO S) depending on cutting strategy and machine capability. The combination of coating and geometry is aimed at operations where thermal loads and material toughness challenge the cutting edge. For specific machine‑and‑workpiece combinations, Metav Werkzeuge’s technical advisers can help determine the optimal cutting data and holder selection to exploit the insert’s strengths. Contact Metav Werkzeuge for tailored advice on integrating Walter Tools Tiger‑tec Silver inserts into the production line, or request assistance on recommended holders and cutting data at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: CNMG120404-MS3-WSM30S-WALTER Article designation: CNMG120404-MS3 WSM30S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM30S Product type: Indexable turning insert Facts Insert shape: Rhombus 80° Free cutting angle: 0° (negative) Corner radius: 0.4 mm Insert size: 12 Thickness designation: 04 Chipbreaker: MS3 Tolerance class: M Special features Coated carbide grade (Tiger‑tec Silver) Designed for rostfreier Stahl (ISO M) and superalloys/titanium (ISO S) Stable cutting edge for heavy cutting and high temperatures Reliable chip control via MS3 chipbreaker Negative rake for robust cuts FAQ What materials is this insert best suited for? The CNMG120404‑MS3 WSM30S indexable turning insert from Walter Tools is optimised for rostfreier Stahl (ISO M) and can also be applied to heat‑resistant superalloys and titanium (ISO S) with suitable machining parameters. How does the Tiger‑tec Silver coating improve performance? Tiger‑tec Silver on the WSM30S grade increases thermal resistance and reduces wear at the cutting edge, helping the insert maintain a consistent profile and longer life when machining tough, heat‑generating materials. Which geometry features support surface finish and edge strength? The rhombic 80° form and the 0.4 mm corner radius give the insert mechanical robustness while enabling a good surface finish; the negative 0° rake enhances edge stability under high loads. Is the MS3 chipbreaker suitable for continuous turning operations? Yes, the MS3 chipbreaker is engineered for controllable chip formation in a range of cutting scenarios, making the insert well suited to semi‑continuous and continuous turning processes. Can Metav Werkzeuge advise on cutting data and holders for this insert? Metav Werkzeuge provides application advice for integrating the Walter Tools CNMG120404‑MS3 WSM30S into production, including recommended holders and cutting parameters tailored to the workpiece and machine. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG120404-MU5 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a robust WMP20G grade and a controlled MU5 chipbreaker for reliable machining of rostfreier Stahl; this results in stable chip form and prolonged edge life. Order the CNMG120404-MU5 WMP20G directly via Metav Werkzeuge or ask our consultants if needed. CNMG120404-MU5 WMP20G — Turning indexable insert for rostfreier Stahl by Walter Tools CNMG120404-MU5 WMP20G is a rhombic 80° indexable turning insert designed for medium to heavy machining of rostfreier Stahl with a Tiger·tec Gold coating for enhanced wear resistance Tiger·tec Gold coating technology WMP20G grade for rostfreier Stahl Rhombic 80° shape, 0.4 mm nose radius Negative 0° relief angle, MU5 chipbreaker Boosted edge stability for demanding rostfreier Stahl operations The combination of the WMP20G grade and Tiger·tec Gold coating provides a measurable improvement in wear resistance and edge life when machining rostfreier Stahl. These features lead to fewer insert changes and more predictable tool-life intervals, which supports higher uptime and lower production cost per part. The MU5 chipbreaker is engineered to promote stable chip formation, reducing the risk of built-up edge and improving surface finish under medium to robust cutting conditions. Geometry that supports versatile turning tasks The insert’s rhombic 80° form and 0.4 mm nose radius balance strength and accessibility for different turning profiles. The geometry enables secure corner strength for interrupted cuts while still allowing entry into tight radii. The negative 0° relief angle provides a robust cutting edge that is less prone to chipping in heavier cuts, making the insert suitable for operations where stability and repeatability are priorities rather than ultra-fine finishing. Process security through controlled chipbreaking and coating synergy The MU5 chipbreaker works in concert with the coated carbide substrate to control chip flow in rostfreier Stahl, a material group known for toughness and heat sensitivity. The indexed insert’s construction reduces tendencies for stringing or welding on the cutting edge, which supports consistent cycle times and reduces secondary operations for chip management. This tangible process security benefits production environments that demand repeatable outcomes and minimal operator intervention. Practical advantages for workshop integration and productivity With a standard ISO designation and compact dimensions, this insert integrates smoothly with common toolholders and turning systems, facilitating rapid replacement and straightforward inventory management. The insert’s attributes—coating, grade and chipbreaker—are chosen to deliver a pragmatic balance between performance and cost-effectiveness, helping maintain throughput without compromising component quality. For tailored cutting data or holder recommendations, technical advice is available to match the insert to specific turning tasks. For an expert recommendation or to secure supply of the Walter Tools CNMG120404-MU5 WMP20G insert for rostfreier Stahl, contact Metav Werkzeuge today for application-oriented advice and reliable delivery Technical data SKU: CNMG120404-MU5-WMP20G-WALTER Item designation: CNMG120404-MU5 WMP20G Product type: Turning indexable insert (Drehwendeschneidplatte) Facts Insert size: 12 mm Thickness: 4 mm Corner radius: 0.4 mm Relief/clearance angle: 0° (negative) Insert shape: Rhombus 80° Special features Series: Tiger·tec Gold Grade: WMP20G (coated carbide) Chipbreaker: MU5 Intended material group: rostfreier Stahl Execution code: G FAQ What materials is this insert suited for? The CNMG120404-MU5 WMP20G from Walter Tools is intended primarily for machining rostfreier Stahl and is optimised for medium to robust cutting conditions. How does the MU5 chipbreaker affect machining? The MU5 chipbreaker on the CNMG120404-MU5 WMP20G promotes controlled chip formation and reduces the likelihood of built-up edge when machining rostfreier Stahl. What benefits does the Tiger·tec Gold series offer? The Tiger·tec Gold coating enhances wear resistance and edge stability, extending the service life of the insert under demanding rostfreier Stahl applications. Is the insert compatible with standard toolholders? The CNMG120404-MU5 geometry and ISO designation are compatible with common turning toolholders designed for CNMG inserts. What is the significance of the negative 0° relief angle? A negative 0° relief angle increases cutting-edge robustness and reduces the risk of chipping in heavier cuts, favouring stable machining in tougher material groups. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG120404-MU5 WMP20S WMP20S Wendeplatten - Walter Tools
Die Kombination aus der Tiger·tec Silver-Beschichtung und der WMP20S-Sorte liefert stabile Schneidkanten und sichere Spanbildung bei der Bearbeitung von rostfreiem Stahl; die negativen Geometrien begünstigen sichere Ausbruchsvermeidung und reproduzierbare Ergebnisse. Bestellen Sie die CNMG120404-MU5 WMP20S direkt über Metav Werkzeuge oder fragen Sie bei Bedarf unsere technischen Berater. CNMG120404-MU5 WMP20S indexable turning insert, Tiger·tec Silver – Walter Tools CNMG120404-MU5 WMP20S is a rhombic 80° indexable insert designed for turning operations on rostfreier Stahl under medium to robust conditions and benefits from Walter Tools' Tiger·tec Silver coating technology Tiger·tec Silver coating for edge stability WMP20S grade optimised for rostfreier Stahl Rhombic 80° geometry for versatile turning Negative 0° clearance for secure cutting Reliable chip control and consistent edge life The coated carbide composition from the Tiger·tec Silver series ensures stable chip formation when machining rostfreier Stahl, a group of materials known for toughness and a tendency to form built-up edges. The WMP20S grade combines coating and substrate properties that promote reproducible cutting edges and reduced edge breakdown. For production environments, this means fewer interruptions for insert changes and a more predictable tool management cycle, supporting increased uptime and process reliability. Geometry that supports secure cutting and process stability The CNMG-style rhombic 80° shape with a 0.4 mm corner radius and negative 0° free angle delivers robust support at the cutting edge, reducing the risk of chipping during interrupted cuts or heavy cross-sections. The insert thickness and form provide mechanical stability, which translates into reliable surface finishes and dimensional repeatability in serial turning operations. This geometry suits operations where tool life and consistent performance are decisive. Clear benefits for workshop productivity With the integrated MU5 chipbreaker, chip control is enhanced across typical turning feeds used on rostfreier Stahl. The chip former promotes short, controllable chips which ease evacuation and protect the insert nose and workpiece from secondary damage. As a result, cycle times remain stable and downstream cleaning or rework is reduced, contributing to a more economical production process without sacrificing component quality. Material suitability and application focus This insert is specified for use on rostfreier Stahl according to the ISO grouping indicated for the grade. The coated carbide construction addresses the high heat and adhesiveness typical of these alloys by improving thermal resistance at the cutting edge and lowering the tendency for built-up edge formation. In practice, the CNMG120404-MU5 WMP20S is suitable for turning operations that demand a balance between tool life and surface integrity under moderate to robust cutting conditions. Contact Metav Werkzeuge today to discuss the CNMG120404-MU5 WMP20S for specific rostfreier Stahl applications or to arrange a tailored cutting strategy with the technical team Technical data SKU: CNMG120404-MU5-WMP20S-WALTER Designation: CNMG120404-MU5 WMP20S Product type: Drehwendeschneidplatte Series: Tiger·tec Silver Grade: WMP20S Facts Insert shape: Rhombus 80° Insert size: 12 Thickness: 04 Corner radius: 0.4 mm Free angle: 0° (negative) Special features Chipbreaker: MU5 Material class: M (rostfreier Stahl applications) Coating: Tiger·tec Silver Execution: G ISO designation: CNMG120404-MU5 WMP20S FAQ What materials is this insert best suited for? The CNMG120404-MU5 WMP20S is optimised for rostfreier Stahl and performs reliably under medium to robust turning conditions. How does the Tiger·tec Silver technology benefit production? Tiger·tec Silver coating increases thermal and wear resistance, improving edge life and supporting consistent chip control with the WMP20S grade. Is the geometry suitable for interrupted cuts? Yes; the rhombic 80° form with a negative 0° free angle and 0.4 mm corner radius enhances mechanical stability for interrupted and heavy cuts. Which chipformer is fitted and what is the result? The MU5 chipbreaker promotes short, controllable chips, reducing the risk of tangling and aiding process stability during rostfreier Stahl turning. Can this insert be used for finishing operations? The combination of grade and geometry supports good surface integrity; however, finishing performance depends on the specific cutting parameters and machine setup. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, factory-new goods of the manufacturer (Walter Tools).
CNMG120404-MU5 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of a coated-carbide grade that balances wear resistance and toughness together with an MU5 chipbreaker for reliable chip control during steel turning; this combination improves uptime and process stability. Order the CNMG120404-MU5 WPP10G directly via Metav Werkzeuge or consult our specialists for application support. CNMG120404-MU5 WPP10G indexable turning insert – Tiger·tec Gold, MU5, Walter Tools A CNMG120404-MU5 WPP10G indexable turning insert engineered for steel machining, featuring a Tiger·tec Gold coated carbide grade and an MU5 chipbreaker for predictable chip formation. Tiger·tec Gold coating for extended tool life Optimised MU5 chipbreaker for reliable chip control CNMG 80° rhombic shape with 0.4 mm corner radius Designed for steel machining (ISO P) with negative 0° Stable chip control for consistent turning performance The insert’s MU5 chipbreaker is designed to produce short, controllable chips in a wide range of turning conditions, reducing interruptions and scrap. Combined with a rhombic CNMG geometry and a 0.4 mm corner radius, the system stabilises the cut and supports continuous productivity on steel (ISO P). This leads to fewer tool changes and more consistent cycle times, which is particularly valuable in high-mix and medium-volume production environments. Coated carbide for longer operating intervals and reliability The Tiger·tec Gold coated carbide grade WPP10G provides a balance between wear resistance and toughness tailored to steel machining. The coating improves resistance to abrasive wear while the substrate maintains edge stability under intermittent cutting. The result is a measurable improvement in tool life and predictable performance, helping to reduce tooling costs per component and increase overall equipment effectiveness in the turning process. Negative clearance and geometry for secure edge engagement With a 0° (negative) clearance angle and robust geometry, the insert offers secure engagement at varying depths of cut and interrupted cuts. The negative arrangement contributes to a stronger cutting edge and stable clamping in the toolholder, which enhances repeatability and reduces the risk of edge chipping under heavy or interrupted cuts. This predictability is crucial when processing unalloyed and alloyed steels where thermal and mechanical loads vary. Practical application advice and process benefits The grade and chipbreaker combination suits standard turning operations on components made from steels classified under ISO P. The insert’s design supports a productive balance between finishing and medium stock removal, delivering a good surface quality while maintaining economical cutting parameters. For customers evaluating process improvements, this insert can help shorten machining cycles and reduce unplanned downtime by lowering the frequency of insert replacements. Contact Metav Werkzeuge for tailored application advice, availability and delivery options for the Tiger·tec Gold CNMG120404-MU5 WPP10G insert; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: CNMG120404-MU5-WPP10G-WALTER Designation: CNMG120404-MU5 WPP10G Product type: indexable turning insert Facts Inscribed circle: 12 mm Corner radius: 0.4 mm Thickness: 04 Clearance angle: 0° (negative) Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Insert shape: Rhombus 80° (CNMG) Chipbreaker: MU5 Grade: WPP10G (for steel, ISO P) Series: Tiger-tec Gold FAQ What materials is this insert intended for? The CNMG120404-MU5 WPP10G insert is specified for machining steels (ISO P); the WPP10G grade is optimised for the heat and chip characteristics typical of steel turning. How does the MU5 chipbreaker affect machining? The MU5 chipbreaker on this Tiger·tec Gold grade promotes short, controlled chips and improved evacuation, which reduces interruptions and supports stable turning operations on steel. Is the insert suitable for interrupted cuts or heavy engagement? Yes; the negative 0° clearance and robust insert geometry provide secure edge support and improved resistance to chipping under interrupted or heavy cutting conditions. Can this insert be used for finishing as well as medium stock removal? The combination of WPP10G coating and the CNMG geometry offers a compromise between surface quality and material removal rate, making it suitable for finishing and moderate roughing tasks on steel. What are the defining dimensions to check for toolholder compatibility? Key dimensions include the 12 mm inscribed circle, 0.4 mm corner radius and the thickness code 04; ensure the toolholder supports a CNMG 80° rhombic insert with these specifications. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, factory-new product from the manufacturer.
CNMG120404-MU5 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating, the universal WPP20G grade and the precise 0.4 mm nose radius to improve tool life and process stability in steel turning; order the insert directly via Metav Werkzeuge or consult our tooling specialists for the ideal cutting parameters. CNMG120404-MU5 WPP20G — Indexable Turning Insert, Tiger·tec Gold (Walter Tools) A CNMG120404-MU5 WPP20G indexable turning insert engineered for versatile steel machining with a Tiger·tec Gold coated substrate and MU5 chipbreaker geometry Tiger·tec Gold coated for longer edge life Universal WPP20G grade optimised for steel 0.4 mm nose radius for dimensional control Rhombic 80° form for versatile turning Negative 0° rake for robust edge stability Consistent productivity when machining steel The Tiger·tec Gold coated grade delivers a measurable balance between wear resistance and toughness, which translates into longer tool life and fewer insert changes during production. With a universal WPP20G composition, the insert is designed specifically for machining steel (P) grades, accommodating the heat and chip formation typical of these materials. The MU5 chipbreaker promotes controlled chip flow and reduced risk of built-up edge, so cycle times become more predictable and overall process efficiency improves. For operations aiming to reduce downtime and secure repeatable results, this geometry supports a stable cutting regime and easier process windows. Geometry and coating that reduce costs and increase reliability The rhombic 80° shape combined with a 0.4 mm nose radius provides good dimensional control on finishing and semi-finishing passes while remaining robust enough for moderate depths of cut. The 0° (negative) rake angle gives a stronger cutting edge and improved resistance to edge chipping under interrupted cuts or unstable workholding. The Tiger·tec Gold coating, applied to a coated carbide substrate, reduces flank wear and maintains sharpness across longer production runs. Taken together, these features cut down on regrinds and insert replacements, improving cost-per-part and supporting higher throughput in small-batch and continuous-turning environments. Practical application notes and setup guidance For reliable results, select feeds and speeds aligned with steel machining recommendations and use coolant strategies consistent with the material and machine capabilities; the insert’s design supports conventional turning operations and performs well under typical industrial feeds. The MU5 chipbreaker is effective across a range of cutting conditions, so fewer tool variants are needed for mixed production. Tolerance class M ensures consistent fit and repeatable clamping in standard toolholders. When integrating this insert into existing tool systems, check holder compatibility for a CNMG 1204 form and ensure clamping achieves the specified seat contact to exploit the insert’s full accuracy potential. For tailored cutting data, availability or batch supply of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for personalised tooling advice and rapid delivery options Technical data SKU: CNMG120404-MU5-WPP20G-WALTER Designation: CNMG120404-MU5 WPP20G Label: Drehwendeschneidplatte CNMG120404-MU5 WPP20G Walter Tools Manufacturer: Walter Tools Core data Inscribed circle: 12 mm Nose radius: 0.4 mm Thickness: 4.0 mm Rake angle: 0° (negative) Insert form angle: 80° Design / Special features Grade: WPP20G Series: Tiger·tec Gold Chipbreaker: MU5 Suitable for: steel (P) Execution: G Tolerance class: M FAQ What materials is this insert intended for? This insert is specified for machining steel; the WPP20G grade and MU5 chipbreaker are tuned to handle unalloyed and alloyed steel under typical cutting conditions. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the CNMG120404-MU5 WPP20G increases wear resistance while maintaining edge toughness, resulting in longer service life and more predictable tool change intervals. Can this insert be used for finishing and semi-finishing? Yes; the rhombic 80° form and 0.4 mm nose radius make the insert suitable for both finishing and semi-finishing operations on steel components. Is the negative 0° rake suitable for interrupted cuts? The negative 0° rake and robust edge geometry improve resistance to chipping, making the insert well suited to interrupted cuts or less stable workholding scenarios. Which chipbreaker should be chosen for mixed production? The MU5 chipbreaker offers versatile chip control across a range of steel grades and cutting conditions, reducing the need for multiple chipbreaker types in mixed-production environments. The Walter brand and other mentioned trademarks are the property of their respective owners and are used here for identification and explanation only. There is no affiliation implied between Metav Werkzeuge and the trademark owners. The offered article is an original, factory-new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
CNMG120404-MU5 WSM20S WSM20S Wendeplatten - Walter Tools
Taking advantage of a Tiger·tec Silver grade and the WSM20S carbide, this turning insert combines reliable chip control (MU5) with a 0.4 mm nose radius for improved surface finish and consistent performance in rostfreier Stahl and high-temperature alloys; order directly via Metav Werkzeuge or consult their technical advisors for process-matching recommendations. CNMG120404-MU5 WSM20S Walter Tools — Turning indexable insert, Tiger·tec Silver, 0.4 mm nose radius CNMG120404-MU5 WSM20S is a turning indexable insert designed for demanding machining of rostfreier Stahl and heat-resistant superalloys, delivering stable cutting with a MU5 chipbreaker in a rhombic 80° format. Tiger·tec Silver coating technology Optimised for rostfreier Stahl and superalloys Rhombic 80° form for stable cutting 0.4 mm nose radius for fine surface finish Consistent machining performance for demanding alloys This insert is engineered for repeatable results when machining rostfreier Stahl and high-temperature alloys. The combination of the WSM20S coated carbide and the MU5 chipbreaking geometry provides secure chip formation even under elevated cutting temperatures, reducing the risk of built-up edge and unplanned rework. Processors benefit from improved cycle-time stability and lower scrap rates due to the insert’s capacity to maintain a stable cutting edge under tough conditions. Improved surface quality with a compact geometry The rhombic 80° shape and 0.4 mm nose radius are chosen to balance robustness and finishing capability. The geometry produces a controlled contact zone on the workpiece, which helps to reduce vibration and yields a finer surface texture on the turned component. For operations where dimensional tolerance and surface integrity matter, this insert supports achieving tighter finishes without sacrificing productivity. Extended tool life through advanced coating and grade The Tiger·tec Silver technology, combined with the WSM20S grade, emphasises thermal stability and edge protection. This results in a longer usable life of the cutting edge in interrupted cuts and continuous turning alike. The coated hardmetal resists abrasive wear and thermal softening, enabling longer tool cycles and fewer tool changes—factors that contribute to lower cycle costs and a more efficient manufacturing flow. Versatile application and straightforward specification Available in the CNMG120404-MU5 format with a negative 0° rake, this insert is suitable for a wide range of turning operations including light to medium roughing and finishing passes in tough-to-cut materials. The MU5 chipbreaker supports reliable chip evacuation, while the M tolerance class and standard plate dimensions simplify integration with common toolholders. The specification makes it straightforward to select and deploy the insert within established turning programmes. Contact Metav Werkzeuge for tailored tooling recommendations and access to Walter Tools inserts; their consultants provide practical support to match the CNMG120404-MU5 WSM20S to specific rostfreier Stahl and superalloy applications Technical data Article number: CNMG120404-MU5-WSM20S-WALTER SKU: CNMG120404-MU5-WSM20S-WALTER Designation: CNMG120404-MU5 WSM20S Core data Shape: Rhombus 80° Size: 12 Nose radius: 0.4 mm Thickness: 04 Clearance/rake: 0° (negative) Tolerance class: M Special features Grade: WSM20S Coating technology: Tiger·tec Silver Chipbreaker: MU5 Series: Tiger-tec Silver Material suitability: S / M Suitable for: rostfreier Stahl and heat-resistant superalloys FAQ What materials is this insert suitable for? The CNMG120404-MU5 WSM20S insert is suitable for rostfreier Stahl and for high-temperature superalloys (designation S), as indicated by the WSM20S grade and Tiger·tec Silver coating. How does the MU5 chipbreaker affect machining? The MU5 chipbreaker promotes consistent chip formation and evacuation, improving process stability and reducing risk of built-up edge when cutting ductile, heat-generating materials. What advantage does Tiger·tec Silver bring? Tiger·tec Silver enhances thermal stability and wear resistance, extending the cutting-edge life of the WSM20S insert under demanding turning conditions. Is the rhombic 80° form beneficial for strength or finish? The rhombic 80° geometry offers a robust cutting edge for strength while permitting good access for finishing cuts, helping to combine durability with surface-quality capability. Can this insert be used for both roughing and finishing? Yes; with its MU5 chipbreaker and 0.4 mm nose radius, the insert is suitable for light to medium roughing and finishing operations in rostfreier Stahl and similar materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CNMG120404-NFT WS10 G Wendeplatten - Walter Tools
Take advantage of the WS10 coated-carbide grade and the NFT chipbreaker for stable chip formation and consistent cycle times; the Rhombic 80° geometry and 0.4 mm corner radius provide flexible turning performance. Order the CNMG120404-NFT WS10 directly via Metav Werkzeuge or ask our consultants if needed. CNMG120404-NFT WS10 — Walter Tools indexable turning insert, Rhombic 80°, 0° negative rake The CNMG120404-NFT WS10 is a coated carbide indexable turning insert designed for general turning tasks where reliable chip control and repeatable performance are required WS10 coated carbide grade for varied materials NFT chipbreaker for controlled chip formation Rhombic 80° geometry for versatile turning 0.4 mm corner radius and 0° negative rake Stable chip control that improves process reliability The combination of the NFT chipbreaker with Walter's WS10 coated-carbide grade delivers consistent chip formation and reliable evacuation under a wide range of cutting conditions. This reduces the risk of built-up edge and interruptions in production, which in turn supports smoother machining cycles and lower scrap rates. For practical planning, the insert's chipbreaking geometry is particularly beneficial in medium-depth turning where controlled chips prevent entanglement and tool damage. Geometry engineered for versatile turning tasks The Rhombic 80° shape and 0° negative rake provide a balance between accessibility and stability on the workpiece, while the 0.4 mm corner radius offers an effective compromise between edge strength and surface finish. These geometric features allow a dependable entry angle on facing and profiling operations, and the insert thickness and dimensions suit standard CNMG-compatible toolholders. The robust edge form supports repeatable results in batch production and frequent tool changes. Integration into production and technical considerations With tolerance class M and the designation as an open series from Walter, the insert is built for consistent interchangeability and process integration. The cutting-material class is specified as coated carbide, but detailed workpiece suitability should be confirmed via the manufacturer's product matrix to match alloy, hardness and cutting parameters. Choosing the appropriate grade and cutting data will maximise tool life and surface quality while ensuring cost-effective machining. Contact Metav Werkzeuge for tailored advice on Walter Tools WS10 inserts and bespoke recommendations for the CNMG120404-NFT to suit specific applications Technical Data SKU: CNMG120404-NFT-WS10-WALTER Article number: CNMG120404-NFT Designation: CNMG120404-NFT WS10 Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Grade/series: WS10; Walter Schneidstoffsorte - Serie offen Tolerance class: M Core data Shape: Rhombus 80° Size: 12 Plate thickness: 04 Corner radius: 0.4 mm Relief angle: 0° (negative) Chipbreaker: NFT Designs & special features Coated carbide (WS10) Execution: G Open series for flexible assortment options Designed for CNMG-compatible toolholders FAQ What materials is this insert suitable for? The WS10 grade is a coated carbide family; specific suitability depends on the manufacturer's product matrix — the CNMG120404-NFT WS10 should be checked against workpiece alloy and hardness for optimal selection. How does the NFT chipbreaker affect machining? The NFT chipbreaker promotes controlled chip formation and evacuation, which improves process stability and reduces the likelihood of chip-related interruptions when using the CNMG120404-NFT WS10. What does a 0° negative rake mean for cutting performance? A 0° negative rake increases edge strength and resistance to chipping, offering greater stability under heavier cuts; this characteristic of the CNMG120404-NFT WS10 supports robust turning operations. Is the insert compatible with standard holders? The CNMG format indicates compatibility with CNMG-design toolholders; the CNMG120404-NFT WS10 is intended for CNMG-compatible clamping systems, subject to correct seat and fastening per toolholder specifications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any connection between our company and the named brands. The offered article is an original, factory-new product of the manufacturer Walter Tools.
CNMG120404-NFT WSM20S WSM20S Wendeplatten - Walter Tools
High-performance indexable insert combining Tiger‑tec Silver coating and the WSM20S grade for secure machining of stainless steel and heat‑resistant alloys; the geometry and chipbreaker support stable cutting and predictable chip flow. The insert features a 0° negative relief and a 0.4 mm corner radius for robust edge life. Order the CNMG120404‑NFT WSM20S directly via Metav Werkzeuge or ask our consultants if needed. CNMG120404-NFT WSM20S – Rhombic 80° indexable insert with Tiger‑tec Silver, Walter Tools CNMG120404-NFT WSM20S is an indexable turning insert optimised for demanding applications on stainless steel and superalloys, combining a heat‑resistant coating and a stable chip control geometry. Tiger‑tec Silver coating for heat resistance WSM20S grade for stable cutting edges Rhombic 80° geometry for versatile turning NFT chipbreaker for predictable chip control Consistent cutting performance on stainless steel and superalloys The combination of the WSM20S grade and Tiger‑tec Silver technology provides enhanced thermal stability and wear resistance during tough turning operations. Designed for materials classified as ISO group M (stainless steels) and S (superalloys and titanium), the grade supports secure chip formation and reduces the risk of built‑up edge under elevated cutting temperatures. For production environments where material consistency and repeatability matter, this insert reduces variability in cutting forces and contributes to a more predictable machining process, which in turn supports higher first‑pass yields and fewer rework cycles. Geometry and chip control that maintain uptime The rhombic 80° geometry paired with a 0° negative relief offers a balance between strength at the cutting edge and accessibility for various turning tasks. The 0.4 mm corner radius provides a robust edge for interrupted cuts while maintaining acceptable surface finish on the workpiece. The NFT chipbreaker is tuned to promote consistent chip segmentation when machining sticky or heat‑sensitive alloys, lowering the likelihood of long stringy chips that can foul the tool or workpiece. These characteristics translate into less unscheduled downtime and more reliable tool life, supporting lean manufacturing goals. Process benefits and workshop integration As an ISO‑standard CNMG insert, the design integrates seamlessly with conventional toolholders and established turning setups, simplifying inventory and tool planning. The coated cemented carbide construction offers a balance of toughness and wear resistance, making the insert suitable for both roughing and finishing passes where edge stability and predictable wear behaviour are priorities. When implemented into a controlled cutting strategy, the insert contributes to reduced cycle times and improved overall equipment productivity, offering measurable advantages for batch production and maintenance of consistent surface quality. Select Walter Tools' Tiger‑tec Silver WSM20S for demanding stainless steel turning—contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for application advice and rapid supply. Technical data Article number: CNMG120404-NFT-WSM20S-WALTER Product type: Drehwendeschneidplatte Manufacturer: Walter Tools WPL designation: CNMG120404-NFT WSM20S Series: Tiger-tec Silver Grade/sort: WSM20S Core specifications Corner radius: 0.4 mm Clearance angle: 0° (negative) Plate form: Rhombus 80° Plate size: 12 mm Plate thickness: 04 Tolerance class: M Design and material features Chipbreaker: NFT Coating/technology: Tiger·tec Silver (coated cemented carbide) Material groups: S / M Suitable for stainless steel (ISO group M): yes Suitable for superalloys/titanium (ISO group S): yes ISO designation (without grade): CNMG120404-NFT FAQ Which materials is this insert suitable for? The CNMG120404‑NFT WSM20S is suitable for stainless steel (ISO group M) and for heat‑resistant superalloys/titanium (ISO group S), thanks to the Tiger‑tec Silver coating and the WSM20S grade. What benefits does the Tiger‑tec Silver technology provide? Tiger‑tec Silver on the WSM20S grade enhances thermal resistance and wear properties, helping the insert maintain a stable cutting edge under high temperatures and supporting consistent chip control. How does the NFT chipbreaker influence machining? The NFT chipbreaker produces segmented, controllable chips during turning, which reduces the risk of long, entangling chips and supports uninterrupted production when machining difficult‑to‑cut alloys with the CNMG120404‑NFT. What does the 0.4 mm corner radius mean for surface finish and edge life? A 0.4 mm corner radius provides a compromise between edge toughness and surface finish: it increases edge strength for interrupted cuts while still permitting acceptable surface quality on finishing passes. Is this insert compatible with standard CNMG toolholders? Yes, the CNMG120404‑NFT WSM20S follows the ISO CNMG designation and is intended for use in standard CNMG‑compatible turning toolholders. Walter Tools (Walter AG): The Walter AG (marketed as Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names remain the property of their respective owners; their mention serves informational purposes only and does not imply any affiliation.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com