DCMT11T308-MM4 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM20S grade for secure chip control and longer edge life; the rhombic 55° form with a 0.8 mm corner radius and 7° relief angle ensures stable cutting when machining stainless steels and high-temperature alloys. Order directly via Metav Werkzeuge or ask the consultants for material-specific recommendations. DCMT11T308-MM4 WSM20S turning indexable insert, Tiger·tec Silver, rhombic 55° — Walter Tools The DCMT11T308-MM4 WSM20S is a rhombic turning insert designed for reliable finishing and semi-finishing of stainless steels and heat-resistant superalloys, offering a balance of thermal stability and chip control. Tiger·tec Silver coating for thermal stability Optimised MM4 chipbreaker for secure chip control Rhombic 55° shape with 0.8 mm corner radius 7° relief angle for reliable cutting edge support High thermal resistance for difficult materials The coated carbide grade and the Tiger·tec Silver technology provide high thermal stability, which reduces edge wear when machining materials that generate heat. For operations in the ISO groups M and S, the WSM20S grade supports secure chip formation and helps prevent build-up on the cutting edge. The combination of coating and substrate improves consistency in batch production, delivering reproducible results across workpieces and reducing the need for frequent index changes. This leads to more predictable cycle times and fewer unscheduled stoppages. Stable geometry for repeatable surface quality A rhombic 55° cutting form with a 0.8 mm corner radius and a 7° relief angle yields a stable contact geometry that maintains cutting-edge integrity under varying cutting conditions. The MM4 chipbreaker is engineered to produce short, controllable chips in tougher steels and superalloys, which improves swarf evacuation and minimises the risk of re-cutting. The net effect is a reliable surface finish and reduced rework, particularly important in high-precision turning where dimensional consistency matters. Practical advantages in production environments The insert thickness designation T3 and the standard 11 size enable straightforward integration into common toolholders and turret systems, maintaining setup simplicity in busy workshops. The grade’s suitability for stainless steels and heat-resistant alloys means fewer tool changes across mixed-material batches, enhancing throughput. Where process security and consistent tool life are key, the coated grade supports longer intervals between indexings, which contributes to lower tooling costs per part and a more efficient production flow. Contact Metav Werkzeuge for application advice and fast supply of Walter Tools DCMT11T308-MM4 WSM20S inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: DCMT11T308-MM4-WSM20S-WALTER Designation: DCMT11T308-MM4 WSM20S Manufacturer: Walter Tools Facts Shape: Rhombic 55° Size: 11 Corner radius: 0.8 mm Relief angle: 7° Thickness: T3 Chipbreaker: MM4 Special features Coating/series: Tiger·tec Silver Grade/sort: WSM20S (coated carbide) Material suitability: stainless steels (M), heat-resistant superalloys / titanium (S) Application: finishing and semi-finishing, secure chip control FAQ What materials is this insert best suited for? The WSM20S grade is optimised for stainless steels and heat-resistant superalloys (ISO groups M and S), offering thermal stability and controlled chip formation for these materials. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker on this insert promotes short, manageable chips that improve evacuation and reduce the risk of workpiece damage during turning operations. Can this insert be used for both finishing and semi-finishing? Yes, the rhombic 55° geometry combined with a 0.8 mm corner radius makes the insert suitable for finishing and semi-finishing applications where surface quality and dimensional control are required. What benefit does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases thermal resistance and wear protection, contributing to longer edge life and greater process reliability when turning demanding alloys. Is the DCMT11T308-MM4 WSM20S compatible with standard toolholders? The insert follows common industry dimensions for rhombic 55° plates and is compatible with matching toolholders specified for this format. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany. The Walter AG (brand: Walter Tools) is a leading provider of precision metalworking tools and is part of the Sandvik group. Protected trademarks and brand names mentioned are the property of their respective owners and are used solely for descriptive purposes. There is no affiliation between our company and the named manufacturers; the offered item is original and new from the manufacturer.
DCMT11T308-MM4 WSM30S MM4 Wendeplatten - Walter Tools
Take advantage of a high-performance turning insert that combines Tiger·tec Silver coating and the WSM30S grade for secure chip control and extended edge life when machining rostfreier Stahl and heat-resistant alloys; order directly via Metav Werkzeuge or consult their technical team for process optimisation. DCMT11T308-MM4 WSM30S Turning Insert – Walter Tools — Tiger·tec Silver, MM4 chipbreaker DCMT11T308-MM4 WSM30S is a precision indexable turning insert designed for demanding applications in rostfreier Stahl and superalloys, offering stable cutting edges and consistent surface quality Tiger·tec Silver coating for increased wear resistance Reliable chip control with MM4 chipbreaker Rhombus 55° form for versatile turning operations 0.8 mm corner radius for balanced strength and finish High-performance grade for rostfreier Stahl and superalloys The insert uses the WSM30S grade within the Tiger·tec Silver technology, engineered for materials that generate high heat and demand stable cutting edges. This grade supports secure chip formation and reduces the risk of built-up edge when machining rostfreier Stahl, which typically requires thermal resilience and edge stability. The combination of coating and substrate delivers predictable wear behaviour, allowing longer tool life and fewer interruptions in production. The controlled flank wear pattern contributes to repeatable part accuracy and consistent surface finish. Geometry and chip management that improve cycle times A Rhombus 55° shape paired with a 7° relief and 0.8 mm corner radius provides a compromise between strength and accessibility in tight turning profiles. The MM4 chipbreaker is optimised for medium to heavy cuts in tough materials, guiding chips away from the cutting zone to reduce heat concentration and tool loading. Thickness T3 and the standard insert size ensure secure clamping in common turning toolholders, resulting in stable cutting forces and improved process reliability. These geometric choices translate directly into shorter cycle times and fewer rework operations. Shop-floor advantages and application scope This turning insert is intended for industrial workshops seeking reproducible performance when facing troublesome materials such as rostfreier Stahl and heat-resistant superalloys. The grade and chipbreaker combination reduce unexpected tool changes and support higher material removal rates without sacrificing surface quality. Integration into existing tool systems is straightforward thanks to the standard ISO form; replacement and indexation are fast, supporting lean manufacturing goals. Proven tool behaviour fosters confidence in repeated batches and aids in achieving tighter tolerances with lower process variability. Contact Metav Werkzeuge for tailored cutting recommendations or to request the DCMT11T308-MM4 WSM30S insert for rostfreier Stahl applications — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data SKU: DCMT11T308-MM4-WSM30S-WALTER Article: Drehwendeschneidplatte DCMT11T308-MM4 WSM30S Walter Tools Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM30S Facts Relief angle: 7° Corner radius: 0.8 mm Insert size: 11 Thickness: T3 Insert form: Rhombus 55° Tolerance class: M Special features Chipbreaker: MM4 Suitable materials: rostfreier Stahl, heat-resistant superalloys (S / M) Coating technology: Tiger·tec Silver Application: indexable turning insert for demanding turning operations FAQ What materials are recommended for this insert? The DCMT11T308-MM4 WSM30S insert is recommended for rostfreier Stahl and heat-resistant superalloys; the WSM30S grade and Tiger·tec Silver coating provide thermal stability and robust edge performance. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker controls chip shape and evacuation for medium to heavy cuts, reducing heat at the cutting edge and enhancing process stability when machining tough materials. Can this insert be used in standard ISO toolholders? Yes, the Rhombus 55° form and ISO-compliant geometry permit use in common indexable turning toolholders; thickness T3 ensures secure clamping. What surface quality can be expected with this grade? Thanks to the coating and stable cutting edge, the grade supports consistent surface finishes while permitting productive cutting parameters in rostfreier Stahl applications. Is the insert suitable for high-speed finishing? The Tiger·tec Silver technology and grade selection favour durability under elevated thermal stress; finishing at higher speeds depends on workpiece alloy and setup, but the insert offers good resistance to thermal wear. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer.
DCMT11T308-MP4 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of Cermet reliability, a controlled MP4 chipbreaker and a 0.8 mm corner radius for steady cutting performance and reduced downtime; order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. DCMT11T308-MP4 WEP10C Drehwendeschneidplatte — Walter Tools Cermet insert, Rhombus 55° The DCMT11T308-MP4 WEP10C is an indexable turning insert designed for productive finishing and semi-finishing in a range of turning operations, combining a cermet grade with a geometry optimised for stability and surface quality. Cermet grade WEP10C for productive machining Rhombic insert 55° for versatile turning MP4 chipbreaker for controlled chip formation 0.8 mm corner radius for stable cutting edge 7° relief angle with T3 insert thickness Productivity gains through a cermet cutting edge The combination of a WEP10C cermet grade and a precise geometry delivers tangible productivity improvements in finishing and light semi-finishing steps. The cermet composition provides a wear-resistant cutting edge that tolerates sustained cutting temperatures better than some carbide grades, resulting in longer life during continuous runs. The MP4 chipbreaker is engineered to promote consistent chip control, which reduces interruptions caused by chip-related problems and helps maintain cycle-time predictability on shop-floor turning operations. Consistent surface quality and edge stability A rhombic 55° form with a 0.8 mm corner radius supports stable engagement and predictable edge behaviour when facing and longitudinal turning. The modest corner radius balances strength and surface finish: it resists chipping under moderate loads while enabling fine surface integrity. The 7° relief angle reduces rubbing at the flank, improving thermal conditions at the cutting edge and assisting in achieving repeatable dimensional results on machined components. Geometry and mounting for reliable machining The insert thickness T3 and the DCMT geometry ensure straightforward seat contact and stable clamping when mounted in compatible toolholders. The insert designation reflects a standard ISO-style geometry that integrates into established tooling systems, allowing a swift changeover and minimising setup time. As with all cermet grades, the workpiece material matrix should be consulted to match the grade to the application; check the product matrix for recommended cutting data and compatible materials to ensure optimal process security. Practical benefits and application guidance Adopting a cermet insert with the described features reduces the frequency of index changes and supports higher-quality finishes in medium- to high-speed turning. The insert is particularly suitable where repeatable surface quality and long tool life are priorities. For specific turning parameters and to confirm suitability for particular alloys, refer to the manufacturer’s recommendations and the product matrix; this avoids overextension of the tool’s intended use and secures process reliability. Discuss Walter Tools cermet inserts with Metav Werkzeuge to identify the best grade and geometry for the application — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DCMT11T308-MP4-WEP10C-WALTER Label: Drehwendeschneidplatte DCMT11T308-MP4 WEP10C Walter Tools SKU: DCMT11T308-MP4-WEP10C-WALTER Facts Insert size: 11 Corner radius: 0.8 mm Relief angle: 7° Thickness: T3 Tolerance class: M Special features Grade: WEP10C (Cermet) Series: Walter Cermet Chipbreaker: MP4 Insert form: Rhombus 55° Geometry designation: DCMT11T308-MP4 Execution: T Material designation: Katalogabhängig FAQ What applications suit this cermet insert best? The DCMT11T308-MP4 WEP10C insert is intended for finishing and light semi-finishing turning operations where surface quality and edge life are priorities. How does the MP4 chipbreaker influence machining? The MP4 chipbreaker on this insert promotes short, controllable chips and stabilises the cutting process, reducing interruptions in turning operations. Is the WEP10C grade suitable for hardened materials? WEP10C is a cermet grade; suitability for hardened or specific materials should be verified in the manufacturer’s product matrix before use. Which geometry benefits face and profile turning most? The rhombic 55° shape combined with a 0.8 mm corner radius provides a versatile geometry that works well for both facing and longitudinal turning with improved edge stability. How should the insert be clamped to ensure repeatable accuracy? Use the correct compatible toolholder for DCMT-style inserts and ensure the seat and clamp are clean and correctly torqued to achieve repeatable positional accuracy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer.
DCMT11T308-MP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of a Tiger·tec Gold grade and the MP4 chipbreaker to deliver consistent edge life and predictable chip control; this results in higher productivity and lower tooling costs. Order directly via Metav Werkzeuge or consult the team for application-specific recommendations. DCMT11T308-MP4 WPP10G turning insert — Rhombus 55°, Tiger·tec Gold, Walter Tools The DCMT11T308-MP4 WPP10G is a rhombic turning insert designed for reliable steel machining in general turning applications. Tiger·tec Gold wear resistance MP4 chip control for stable cutting Rhombus 55° geometry for versatile use 7° clearance for reduced rubbing Higher throughput through engineered wear resistance The combination of Tiger·tec Gold technology and the WPP10G grade provides a coated carbide surface engineered for long tool life and stable wear behaviour when machining steel (P). This engineered coating reduces flank wear and extends productive cutting times, which lowers the cost per component and increases machine uptime. The result is an insert that supports higher cycle rates and predictable tool-change intervals, improving process reliability on serial production. Precise chip control for safer, more efficient turning The MP4 chipbreaker is optimised to form short, controllable chips in typical steel turning conditions, reducing the risk of entanglement and improving surface finish. Combined with the 0.8 mm corner radius and a Rhombus 55° outline, this geometry balances strength and edge sharpness to maintain dimensional accuracy while handling moderate interrupted cuts. These features simplify parameter selection and contribute directly to consistent part quality in daily workshop operations. Geometry and mounting that simplify integration The insert’s form factor and 7° clearance minimise rubbing and help maintain cutting stability across a range of feeds and depths. The nominal plate size and T3 thickness provide a robust seating for the cutting edge, supporting repeatable clamping and reducing the risk of movement under load. Integration into common toolholders is straightforward, making the component suitable for retrofit or new setups without complex adjustments, and supporting efficient tool management in mixed-production environments. Discuss material-specific recommendations with Metav Werkzeuge to match this Walter Tools insert to the machining task and secure consistent results in steel turning Technical data Article number: DCMT11T308-MP4-WPP10G-WALTER Label: Drehwendeschneidplatte DCMT11T308-MP4 WPP10G Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Numbers / Core technical data Inscribed circle: 11 mm Corner radius: 0.8 mm Clearance angle: 7° Chipbreaker: MP4 Thickness: T3 Tolerance class: M Special features / Versions Grade: WPP10G (Tiger·tec Gold) Coated carbide Plate form: Rhombus 55° Execution: T Material suitability: Steel (P) Series: Tiger·tec Gold FAQ What materials is this insert suited for? The DCMT11T308-MP4 WPP10G insert is specified for steel (P) applications and is optimised for the typical heat and chip formation encountered when turning unalloyed and alloyed steels. How does the MP4 chipbreaker affect machining? The MP4 chipbreaker promotes short, controllable chips during turning, which supports safer chip evacuation and more consistent surface quality when using the DCMT11T308-MP4 WPP10G insert. Can this insert handle interrupted cuts? With a 0.8 mm corner radius and robust coated carbide backing, the insert offers good resistance to impact and is suitable for moderate interrupted turning tasks on steel. What benefits does Tiger·tec Gold provide? The Tiger·tec Gold technology in grade WPP10G enhances wear resistance and edge stability, extending tool life and improving process repeatability for serial production. Is the insert compatible with standard toolholders? The rhombic 55° form and T3 thickness ensure straightforward integration into common turning toolholders designed for DCMT-style inserts. The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are used solely for explanation; there is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
DCMT11T308-MP4 WPP20G MP4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and an optimised MP4 chipformer for consistent productivity and longer tool life; order the inserts directly via Metav Werkzeuge or consult our team for application advice. DCMT11T308-MP4 WPP20G Drehwendeschneidplatte – Tiger·tec Gold coating for Stahl (Walter Tools) The DCMT11T308-MP4 WPP20G is a rhombic 55° turning insert engineered for general Stahl turning, combining Tiger·tec Gold wear resistance with a controlled chipformer for stable, repeatable machining. Tiger·tec Gold coating for superior wear resistance Optimised MP4 chipformer for reliable chip control Rhombic 55° form with 0.8 mm corner radius Designed for Stahl machining with stable edge life Consistent productivity through advanced coating and chip control The combination of the Tiger·tec Gold coating and the WPP20G grade delivers a measurable improvement in surface integrity and tool life when machining Stahl. The Tiger·tec Gold technology is a multilayer coating system that enhances thermal and abrasive resistance, which means longer cutting times between indexings and fewer tool changes. The MP4 chipformer is specifically shaped to break and evacuate chips reliably under the thermal and mechanical loads typical of turning operations in the P material group; this reduces tool edge wear and supports uninterrupted production runs. As a result, process stability and productivity are improved, contributing to lower unit costs and predictable cycle times. Geometry that balances strength and surface finish The Rhombic 55° insert geometry with a 0.8 mm corner radius provides a balanced combination of cutting-edge strength and surface finishing capability. A larger corner radius increases edge robustness and offers improved resistance to chipping during interrupted cuts, while the 55° approach angle supports good access to turned features and controlled cutting forces. The insert thickness T3 and tolerance class M ensure consistent seating and repeatable clamping, which reduces dimensional scatter between insert changes. These geometric choices translate into dependable part quality and reduced rework, especially on medium to heavy turning tasks in Stahl applications. Application spectrum and process advantages for workshop use Rated for the P application group, the insert is intended for unalloyed and alloyed Stahl, where typical heat generation and chip formation patterns are expected. The DCMT11T308-MP4 WPP20G is suitable for a broad range of turning operations, from roughing where edge security is critical to medium-finishing where surface quality matters. The coated carbide substrate and MP4 chip control allow for higher cutting speeds compared with conventional grades, improving throughput without compromising stability. For integrators and production planners, this offers a clear cost-benefit: reduced tool consumption per part and fewer machine interruptions. If specific cutting data are required for an application, compatibility with existing toolholders and cutting parameters can be verified quickly to shorten setup time and get production moving sooner. Contact Metav Werkzeuge for customised cutting parameters and reliable supply of Walter Tools DCMT11T308-MP4 WPP20G inserts Technical data Article number: DCMT11T308-MP4-WPP20G-WALTER Article name: Drehwendeschneidplatte DCMT11T308-MP4 WPP20G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Type: Drehwendeschneidplatte Numbers / Core technical data Plate size: 11 Cutting edge angle: 55° Free angle: 7° Corner radius: 0.8 mm Thickness: T3 Tolerance class: M Designs / Special features Coating: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipformer: MP4 Geometry: Rhombic 55° Base designation: DCMT11T308-MP4 Application group: P (Stahl) Execution/configuration: T FAQ What materials is this insert suitable for? The DCMT11T308-MP4 WPP20G insert is specified for the P material group and is suitable for machining various types of Stahl, including unalloyed and alloyed grades. How does the MP4 chipformer benefit the machining process? The MP4 chipformer on the DCMT11T308-MP4 WPP20G promotes controlled chip breakage and evacuation, which improves process stability and reduces the risk of chip-related interruptions. What is the corner radius and how does it affect performance? This insert features a 0.8 mm corner radius, which increases edge strength for interrupted cuts and helps achieve a consistent surface finish when used with appropriate cutting parameters. Is the insert optimised for finishing or heavy cutting? With Tiger·tec Gold coating and the rhombic 55° geometry, the DCMT11T308-MP4 WPP20G performs well across medium finishing to robust turning tasks, offering a compromise between edge security and surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT11T308-MP6 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the MP6 chipbreaker for efficient steel turning with consistent chip control and prolonged tool life; order directly via Metav Werkzeuge or contact the consultants for application advice. DCMT11T308-MP6 WPP10G indexable turning insert, for steel — Walter Tools A DCMT11T308-MP6 WPP10G indexable turning insert engineered for productive steel machining, featuring the Tiger·tec Gold coating and an MP6 chipbreaker for reliable performance. Tiger·tec Gold coating for extended tool life MP6 chipbreaker for consistent chip control Rhombic 55° geometry with 0.8 mm corner radius High productivity for steel machining with optimised coating The coated carbide grade WPP10G from the Tiger·tec Gold family is designed specifically for the machining of steels and offers a balanced combination of wear resistance and toughness. The result is a cutting edge that resists abrasive wear while tolerating the thermal loads typical for steel turning, which leads to improved tool life and fewer insert changes. Using a coated grade reduces downtime and contributes to a more economical production rhythm in batch and serial turning operations. Stable chips and improved surface finish through chipbreaker design The MP6 chipbreaker is engineered to generate short, controlled chips when turning steels, lowering the risk of entanglement and improving machining stability. Predictable chip formation supports steady cutting parameters and reduces the likelihood of scratch marks on the workpiece; this contributes directly to a consistent surface quality and reduces the need for rework. The combination of the chipbreaker and the insert’s rhombic 55° form ensures efficient cutting at varied depths of cut and feed rates. Precision geometry that enhances repeatability and clamping security The rhombic 55° insert shape with a 0.8 mm corner radius and 7° relief angle delivers a secure seating in standard toolholders and supports repeatable part accuracy. The T3 plate thickness provides a stable edge for interrupted cuts and light to medium turning operations. Together, the geometry and the coated substrate enable reliable performance across a wide range of steel grades, giving workshop planners predictable tool life and consistent dimensional results. For precise application recommendations or to procure Walter Tools DCMT11T308-MP6 WPP10G inserts for steel turning, contact Metav Werkzeuge by e-mail or phone to discuss cutting data and availability Technical data SKU: DCMT11T308-MP6-WPP10G-WALTER Article designation: DCMT11T308-MP6 WPP10G Product type: Indexable turning insert Manufacturer: Walter Tools Core technical data Insert size: 11 mm Corner radius: 0.8 mm Relief (free) angle: 7° Plate thickness: T3 Special features Coating: Tiger·tec Gold Grade / sort: WPP10G Chipbreaker: MP6 Geometry: Rhombic 55° Series: Tiger-tec Gold Tolerance class: M Application group: Steel (ISO P) FAQ What materials is this insert suitable for? The DCMT11T308-MP6 WPP10G insert is optimised for machining steels (ISO P) and offers wear-resistant performance for a wide range of unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP10G grade increases abrasive wear resistance and thermal stability, helping to extend tool life and maintain consistent cutting performance in steel turning. Which chip behaviour can be expected with the MP6 chipbreaker? The MP6 chipbreaker produces short, controllable chips during steel turning, enhancing machining stability and reducing chip handling issues at medium cutting parameters. Is this insert suitable for interrupted cuts or heavy cuts? The combination of a robust coated carbide grade and the T3 thickness gives the insert good edge security for light to medium interrupted cuts; for very heavy interruptions, select toolholder and parameter adaptations are recommended. What geometry is provided and how does it affect clamping? The rhombic 55° form with a 0.8 mm corner radius and 7° relief angle ensures secure clamping in standard holders while delivering reliable edge strength for repeatable turning accuracy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade marks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, factory-new goods from the manufacturer.
DCMT11T308-MP6 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and MP6 chipbreaker for stable cutting and long tool life; the rhombic 55° geometry with a 0.8 mm corner radius delivers reliable surface quality in steel turning. Order the insert directly via Metav Werkzeuge or consult the Metav team for application advice. DCMT11T308-MP6 WPP20G indexable turning insert for steel, Tiger‑tec Gold – Walter Tools The DCMT11T308-MP6 WPP20G is a rhombic 55° indexable turning insert engineered for general steel machining, offering a coated carbide grade optimised for consistent wear resistance and predictable performance. Tiger·tec Gold coating for extended life MP6 chipbreaker for controlled chips Rhombic 55° geometry for versatile turning 0.8 mm corner radius for improved finish Longer production runs through advanced coating The Tiger‑tec Gold technology used in this grade, WPP20G, provides a multi-layer coated carbide that reduces flank and crater wear under typical steel cutting conditions. This results in extended tool life and fewer insert changes during batch production, supporting higher uptime and lower total machining costs. The coating is specifically tuned to cope with the heat and chip formation typical for group P materials, which improves process stability on medium to high cutting speeds. Predictable chip control and surface quality The MP6 chipbreaker, combined with the rhombic 55° geometry and 7° relief, offers reliable chip formation and evacuation when turning steel. Controlled chips reduce the risk of surface defects and tool damage, enabling consistent part-to-part quality and smoother operation in automated or manual setups. The 0.8 mm corner radius helps balance strength and finish, producing a fine surface while maintaining edge durability. Optimised geometry for common turning tasks With the DCMT format and T3 thickness, this insert suits a wide range of conventional turning applications where balance between robustness and accessibility is required. The insert size (11) and tolerance M ensure repeatable positioning in standard toolholders, simplifying inventory management and tool changeovers. The combination of grade and chipbreaker makes the insert suitable for diverse steel types, offering a practical compromise between wear resistance and toughness. Consistent integration in production environments Tolerance class M and standardised geometry support straightforward integration into existing tooling systems, making tool planning and requalification more efficient. The coated carbide grade WPP20G is categorised for steel according to ISO guidance, which helps engineers specify cutting data with predictable outcome. For workshop planners and production engineers, these characteristics translate to measurable process reliability and easier choice of cutting parameters. Contact Metav Werkzeuge today to discuss application parameters, availability and suitable cutting data for Walter Tools inserts and to request sample inserts for trial runs. Technical data Article number: DCMT11T308-MP6-WPP20G-WALTER Description: Indexable turning insert DCMT11T308-MP6 WPP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP20G Core data Relief angle: 7° Corner radius: 0.8 mm Insert size: 11 Thickness: T3 Geometry: Rhombic 55° Tolerance class: M Materials & features Chipbreaker: MP6 Applicable material group: Steel (P) according to ISO 513 Coating technology: Tiger‑tec Gold Designation without grade: DCMT11T308-MP6 Product type: Indexable turning insert FAQ What materials is this insert designed for? The DCMT11T308-MP6 WPP20G insert from Walter Tools is designed primarily for steel (ISO material group P), with the grade and chipbreaker tuned for typical steel machining conditions. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the WPP20G grade improves wear resistance and heat management, extending insert life and reducing downtime for insert changes in serial production. What advantages does the MP6 chipbreaker provide? The MP6 chipbreaker delivers controlled chip formation and evacuation, which leads to more predictable surface finish and fewer interruptions from poorly formed chips during turning operations. Is the insert compatible with standard DCMT toolholders? Yes, the DCMT format and tolerance class M ensure compatibility with standard DCMT toolholders, allowing straightforward replacement and reproducible positioning. Can this insert be used for roughing and finishing? The combination of 0.8 mm corner radius and the WPP20G grade provides a balance suitable for many semi-finish and finish turning tasks in steel; cutting data should be adjusted according to specific component requirements. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT11T308-MP6 WPP30G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold wear resistance, a dedicated MP6 chipbreaker and the versatile Rhombus 55° geometry for efficient steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DCMT11T308-MP6 WPP30G – Indexable turning insert for steel – Walter Tools The DCMT11T308-MP6 WPP30G is an indexable turning insert engineered for general steel machining, combining a coated carbide grade with an MP6 chipbreaker for stable chip formation and productive metal removal. Tiger·tec Gold coating for longer tool life Rhombus 55° geometry for versatile turning 7° clearance angle reduces flank rubbing MP6 chipbreaker for reliable chip control Durable coating that extends tool life and process stability The Tiger·tec Gold coating paired with the WPP30G carbide grade provides enhanced wear resistance and thermal stability during steel machining. Designed as a coated carbide insert, it copes with the heat and typical chip formation seen when cutting steels under ISO P classification, helping to extend edge life and reduce frequency of index changes. The coated surface also contributes to consistent friction characteristics, which supports predictable tool behaviour and a reliable process window. Geometry optimised for control and surface quality The Rhombus 55° form and the integrated MP6 chipbreaker are configured to improve chip flow and stability during both roughing and semi-finishing passes. The insert’s 7° clearance angle reduces rubbing on the flank face, while the 0.8 mm corner radius offers a balance between edge strength and achievable surface finish. These geometric choices result in fewer interruptions for machine stops and consistent component quality, particularly where repeatability and reduced scrap rates are priorities. Application focus: steel machining with reliable performance Specified for the ISO P material group, this indexable insert is suited to a broad range of unalloyed and alloyed steels. The design supports both interrupted and continuous cuts, delivering a productive combination of chip control and edge stability. When paired with appropriate cutting parameters and a compatible DCMT-style toolholder, the insert helps to achieve longer effective cutting times and steady surface finish results, making it a pragmatic choice for throughput-oriented operations. Contact Metav Werkzeuge for tailored cutting data or to discuss Walter Tools’ DCMT11T308-MP6 WPP30G for steel applications — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange practical advice and availability. Technical Data Article number: DCMT11T308-MP6-WPP30G-WALTER Manufacturer: Walter Tools Product type: Indexable turning insert (Drehwendeschneidplatte) ISO designation: DCMT11T308-MP6 WPP30G Facts Relief/clearance angle: 7° Corner radius: 0.8 mm Insert size: 11 mm Tolerance class: M Plate thickness: T3 Features Coating / grade: Tiger·tec Gold, WPP30G Chipbreaker: MP6 Geometry: Rhombus 55° Execution: T Material application: Steel (ISO P) Series: Tiger-tec Gold FAQ Which materials is this insert suitable for? The DCMT11T308-MP6 WPP30G is specified for ISO P materials and is intended primarily for machining steel, including unalloyed and alloyed steels. How does the MP6 chipbreaker affect machining? The MP6 chipbreaker promotes predictable chip formation and evacuation during steel turning, which supports consistent cutting forces and surface quality with the DCMT11T308-MP6 insert. Is the geometry suited to finishing or roughing? The combination of a 0.8 mm corner radius and the Rhombus 55° form makes the insert versatile for both semi-finishing and medium-depth roughing operations, depending on cutting parameters. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WPP30G grade offers improved wear resistance and thermal stability, extending edge life and maintaining process stability under the temperatures typical of steel machining. Which toolholders are compatible with this insert style? The insert follows the DCMT form factor and is compatible with toolholders designed for DCMT11-style indexable inserts; holders must match the insert thickness and seat geometry for secure clamping. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision metal‑cutting tools and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
DCMT11T308-MW4 WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of the WKK10S cutting grade and Tiger·tec Silver coating for durable performance and consistent chip control when machining cast iron; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DCMT11T308-MW4 WKK10S indexable turning insert – Tiger·tec Silver, for cast iron (Walter Tools) The DCMT11T308-MW4 WKK10S is an indexable turning insert engineered for reliable finishing and medium-duty roughing of cast iron, combining a wear-resistant coating with a chipformer optimised for short, breaking chips. Tiger·tec Silver coating for wear resistance Optimised for cast iron machining Rhombus 55° shape with 7° relief 0.8 mm corner radius for stable cutting Longer tool life through advanced coating and grade The combination of the Tiger·tec Silver coating and the WKK10S grade yields a consistently durable cutting edge under the abrasive conditions typical of cast iron machining. The layered coating reduces flank wear and heat build-up, which extends usable tool life and reduces frequency of index changes. For production environments this means fewer interruptions and a more predictable maintenance rhythm. The insert is a coated carbide design that balances toughness and abrasion resistance, giving a measurable benefit in both economy and uptime. Predictable chip formation and improved process security Equipped with the MW4 chipbreaker and tailored to material group K (cast iron), this insert produces short, controllable chips that are easy to evacuate. Stable chip formation is crucial for unattended operations and for avoiding damage to the workpiece and toolholder. The chipbreaker geometry is specifically adapted to the fragmenting behaviour of cast iron, limiting entanglement and supporting consistent surface quality. As a result, the insert contributes directly to higher process reliability and a lower scrap rate. Geometry tuned for dimensional stability and surface quality The Rhombus 55° shape and 7° relief angle provide a versatile cutting geometry that suits a range of turning strategies, including profiling and light turning. The 0.8 mm corner radius offers a good compromise between edge strength and surface finish: it reinforces the cutting edge under intermittent cuts while still enabling fine finishes when required. The medium tolerance class M supports repeatable seating in standard toolholders, helping to maintain consistent part accuracy across index changes. Easy integration into machining workflows With its standard DCMT designation and common insert size, the component integrates smoothly into existing toolholders and production setups without the need for bespoke fixtures. The insert’s characteristics — coating, chipbreaker and geometry — make it suitable for both serial production and single-part machining where cast iron components demand stable, repeatable results. Combined with Walter Tools’ known consistency in manufacturing, the insert supports efficient tool management and predictable process planning. For application-specific recommendations on Walter Tools' DCMT11T308-MW4 WKK10S or to discuss how this insert can improve cast iron machining in your production, contact Metav Werkzeuge for expert advice and order support: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data SKU: DCMT11T308-MW4-WKK10S-WALTER Designation: DCMT11T308-MW4 ISO designation: DCMT11T308-MW4 WKK10S Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger·tec Silver Core specifications Grade: WKK10S Coating: Tiger·tec Silver Shape: Rhombus 55° Relief angle: 7° Corner radius: 0.8 mm Insert size: 11 Thickness: T3 Chipbreaker: MW4 Tolerance class: M Applications & features Suitable for cast iron (K) Coated carbide composition Stable chip formation for short chips Optimised for abrasive wear typical of cast materials Balanced toughness and wear resistance FAQ What materials is this insert suited for? The DCMT11T308-MW4 WKK10S is designed primarily for cast iron machining (material group K), where its coating and chipbreaker deliver stable performance. How does the Tiger·tec Silver coating help in production? The Tiger·tec Silver coating on the WKK10S grade reduces flank wear and heat, improving tool life and contributing to more consistent machining cycles with fewer index changes. What advantage does the MW4 chipbreaker provide? The MW4 chipbreaker is shaped for short, breaking chips typical of cast iron workpieces, helping to avoid chip entanglement and reducing the risk of surface damage. Is the insert compatible with standard toolholders? Yes — the DCMT11T308-MW4 format and Rhombus 55° geometry are standard dimensions that fit common toolholders used for turning inserts of this series. How does the 0.8 mm corner radius influence results? A 0.8 mm corner radius improves edge strength under interrupted cuts while still enabling good surface finish, offering a compromise between robustness and finish quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
DCMT11T308-MW4 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the high process stability and extended tool life offered by the Tiger‑tec Silver grade and the MW4 chipbreaker for efficient cast iron machining; order the DCMT11T308‑MW4 WKK20S directly via Metav Werkzeuge or contact our consultants for tailored application advice. DCMT11T308‑MW4 WKK20S – Indexable turning insert, Tiger‑tec Silver grade for cast iron machining | Walter Tools A DCMT11T308‑MW4 WKK20S indexable turning insert engineered for productive finishing and reliable chip control in cast iron components Tiger‑tec Silver coating for wear resistance MW4 chipbreaker for controlled chips Optimised for cast iron (ISO K) Rhombus 55° form with 7° clearance Higher productivity through advanced coating and grade The combination of the Tiger‑tec Silver system with the WKK20S grade delivers a measurable improvement in tool life and process reliability. The insert’s coated carbide substrate provides resistance to the abrasive wear typical of cast iron machining, reducing tool changes and downtime. For production environments where cycle time and tool consumption are key performance indicators, this geometry helps maintain consistent metal removal rates and surface finish quality. Stable chip control that secures machining processes Controlled chip formation is a decisive factor for uninterrupted turning operations. The MW4 chipbreaker on this insert promotes short, easily evacuated chips when cutting cast iron, lowering the risk of chip entanglement and tool damage. As a consequence, machine uptime increases and secondary operations for chip handling are minimised, which supports predictable cycle times and improved overall equipment effectiveness (OEE). Precision geometry for consistent surface quality The Rhombus 55° platform combined with a 7° clearance and a 0.8 mm corner radius ensures a reliable cutting edge contact and repeatable dimensional results. This geometry, together with tolerance class M, offers a balance between robustness and the ability to produce fine surface finishes on turned faces. The insert’s size 11 designation and T3 thickness contribute to secure clamping and stable cutting conditions under a range of feed and depth settings. Application focus: optimised for ISO K materials Designed specifically for ISO K applications, the insert addresses the typical challenges of cast iron: abrasive constituents and short, brittle chips. The WKK20S grade is tuned for these conditions to provide consistent performance across a broad set of cast iron types. For shops aiming to standardise on a versatile indexable solution, this insert supports both productive roughing and reliable finishing passes when parameters are set according to workpiece grade and machine capability. For dependable productivity with Walter Tools’ Tiger‑tec Silver grade and the MW4 chipbreaker, contact Metav Werkzeuge for order placement or technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: DCMT11T308-MW4-WKK20S-WALTER Product type: Indexable turning insert Designation: DCMT11T308-MW4 WKK20S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKK20S Chipbreaker: MW4 Core Data Size: 11 Thickness: T3 Corner radius: 0.8 mm Clearance angle: 7° Plate form: Rhombus 55° Tolerance class: M Material group: K (cast iron) Special features Coated carbide, Tiger‑tec Silver technology Optimised for cast iron machining (ISO K) Stable chip control with MW4 chipbreaker Suitable for productive roughing and finishing FAQ What materials is this insert suited for? The DCMT11T308‑MW4 WKK20S is specifically optimised for cast iron (ISO K); the WKK20S grade and Tiger‑tec Silver coating address abrasive wear and short-chip formation typical of these materials. How does the MW4 chipbreaker improve machining? The MW4 chipbreaker produces short, controlled chips which reduce entanglement and help maintain continuous cutting conditions, improving process reliability with the Walter Tools insert. What does the Rhombus 55° form mean for cutting? A Rhombus 55° profile gives versatility in turning operations by combining accessibility for external contours with a stable cutting edge geometry that supports repeatable surface quality. Can this insert be used for finishing and roughing? Yes, the combination of WKK20S grade and geometry provides a balance suited to both productive roughing and consistent finishing operations on cast iron components. What are the key geometry values to consider when programming? Important values include the 0.8 mm corner radius, 7° clearance, and the size 11/T3 designation; these parameters influence feed, depth of cut and expected surface finish. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original and brand‑new from the manufacturer.
DCMT11T308-MW4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of a wear‑resistant Tiger‑tec Gold grade, precise MW4 chip control and a compact rhombic 55° geometry for efficient turning of steel components; order directly via Metav Werkzeuge or request application advice from our consultants for optimal process integration DCMT11T308-MW4 WPP10G turning insert for steel — Walter Tools DCMT11T308-MW4 WPP10G is an indexable turning insert designed for reliable steel machining with a Tiger‑tec Gold coating for extended tool life Tiger‑tec Gold grade WPP10G for long tool life MW4 chipbreaker for consistent chip control Rhombic 55° geometry for flexible turning strategies 7° clearance angle for secure cutting engagement Higher productivity with Tiger‑tec Gold coating The coated carbide grade WPP10G from the Tiger‑tec Gold series is engineered for productive steel machining. The combination of a wear‑resistant coating and a substrate optimised for heat and abrasion reduces flank wear and extends service intervals. This results in improved cycle times and fewer tool changes, which directly supports higher throughput on turning centres. The description of the grade indicates a balance between wear resistance and toughness that is particularly suited to unalloyed and alloyed steel applications, offering a reliable base for stable cutting parameters. Consistent surface finish and controlled chip formation A clear advantage of the insert is the MW4 chipbreaker paired with the rhombic 55° shape, which together promote stable chip formation and evacuation. The controlled chip flow minimises interruptions and supports consistent surface quality on the workpiece. With a 0.8 mm corner radius, the insert provides a compromise between strength and fine surface generation, enabling careful finishing passes while maintaining robustness during heavier engagement. These features make the insert suitable for a range of turning operations where predictable chip behaviour and part finish are priorities. Geometry and tolerance for process security The insert’s 7° clearance and T3 thickness contribute to a rigid cutting edge and reduced vibration in demanding cuts. The tolerance class M underlines manufacturing consistency, which simplifies tool setting and repeatability across batches. As an indexable insert, the component offers quick indexing and consistent results over multiple edges, reducing downtime and cost per component. Walter Tools’ focus on precision and stable cutting performance supports applications where reproducible results and long tool life form the foundation of efficient production. Contact Metav Werkzeuge for tailored machining advice and to secure Walter Tools Tiger‑tec Gold WPP10G inserts; reach us at info@metav-werkzeuge.com or +49 2822 7131930 to discuss suitable grades and cutting data Technical Data Article number: DCMT11T308-MW4-WPP10G-WALTER Label: Drehwendeschneidplatte DCMT11T308-MW4 WPP10G Walter Tools Product type: Drehwendeschneidplatte (turning insert) Manufacturer: Walter Tools Facts Grade / series: Tiger‑tec Gold, WPP10G Clearance angle: 7° Corner radius: 0.8 mm Insert size: 11 Thickness: T3 Tolerance class: M Special features Chipbreaker: MW4 Shape: Rhombic 55° Material designation: P (suitable for steel) Coated carbide grade Plate designation: DCMT11T308-MW4 Indexable insert format for quick edge changes FAQ What materials is this insert suitable for? The WPP10G grade is developed for machining steel; the insert’s designation P confirms suitability for unalloyed and alloyed steel workpieces. How does the MW4 chipbreaker affect machining? The MW4 chipbreaker improves chip control and evacuation, leading to more consistent surface quality and fewer interruptions in continuous turning operations. Can the insert be used for finishing passes? With a 0.8 mm corner radius and the coated grade’s wear resistance, the insert is suitable for a range of finishing and general turning tasks in steel applications. What makes Tiger‑tec Gold different from standard grades? Tiger‑tec Gold combines a tailored coating with a carbide substrate to balance wear resistance and toughness, enhancing tool life and process security in demanding steel machining. Is this insert compatible with standard toolholders? The DCMT format follows common indexable insert dimensions; the DCMT11T308-MW4 designation allows selection of matching toolholders and clamping systems used in conventional turning tool families. The Walter AG (trade name: Walter Tools), headquartered in Tübingen, is a global manufacturer of precision cutting tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. The mentioned brands are cited exclusively for explanation and comparison; no affiliation with our company is implied.
DCMT11T308-MW4 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the MW4 chipbreaker for reliable chip control and extended tool life; the rhombic 55° form with a 0.8 mm corner radius delivers stable turning of steel and predictable surface quality. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DCMT11T308-MW4 WPP20G turning insert (for Steel) – Walter Tools The DCMT11T308-MW4 WPP20G is a rhombic 55° indexable turning insert designed for general steel machining, offering a 7° clearance angle and a Tiger·tec Gold coated carbide grade for robust performance. Tiger·tec Gold coating for robust wear resistance Optimised MW4 chipbreaker for dependable chip control Rhombic 55° form with 0.8 mm corner radius Designed for steel machining (ISO group P) Longer tool life and consistent wear protection for steel turning The combination of coated carbide and the Tiger·tec Gold technology provides enhanced surface hardness and heat resistance, which translates into longer tool life under typical steel cutting temperatures. The applied coating reduces abrasive wear and helps preserve the cutting edge geometry for extended production runs. For shops focused on stable performance in series turning, this insert reduces the frequency of index changes and supports predictable tool consumption. The product name appears here to identify the exact insert variant and its grade for procurement and tool assembly. Geometry that balances strength and surface finish A rhombic 55° shape with a corner radius of 0.8 mm and a 7° clearance angle offers a compromise between robustness and finishing capability: the geometry supports controlled cutting forces while still allowing fine surface results on turned parts. The MW4 chipbreaker is tuned for steel applications (ISO group P) and promotes regular chip segmentation, reducing the risk of long, tangled chips and improving process stability. The nominal plate size and the T3 plate thickness ensure secure clamping and repeatable positioning in standard toolholders. Process reliability, application scope and economic benefit With tolerance class M and a grade optimised for steel, this insert supports a wide range of general turning tasks from semi-finish to finishing, depending on machine and process parameters. The engineered chip control and coating yield lower downtime for insert changes and help maintain consistent part quality across batches. For manufacturers seeking a balance of productivity and economy, the combination of geometry and Tiger·tec Gold coating contributes to reduced overall machining costs per component and fewer unscheduled interventions. Contact Metav Werkzeuge for tailored recommendations on toolholders and cutting data for Walter Tools inserts, or request assistance from our technical consultants at info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number / SKU: DCMT11T308-MW4-WPP20G-WALTER Designation: DCMT11T308-MW4 WPP20G Product type: Indexable turning insert (drehwendeschneidplatte) Series / Grade: Tiger·tec Gold / WPP20G Manufacturer: Walter Tools Core technical data Plate form: Rhombic 55° Plate size: 11 Corner radius: 0.8 mm Clearance angle: 7° Plate thickness: T3 Chipbreaker: MW4 Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Material application: Steel (ISO group P) Series description: Coated carbide grade for steel machining Execution: T FAQ What materials is this insert suitable for? The DCMT11T308-MW4 WPP20G insert is designed for machining steel (ISO group P); the WPP20G grade and Tiger·tec Gold coating are optimised for the heat and chip formation typical of steel turning. How does the MW4 chipbreaker affect machining? The MW4 chipbreaker promotes regular chip segmentation and improved chip evacuation on steel, supporting process reliability and reducing the risk of chip entanglement during continuous turning operations. What does the 0.8 mm corner radius mean for part quality? A 0.8 mm corner radius balances edge strength with surface finish: it increases edge robustness compared with smaller radii while still allowing good surface quality for general turning tasks. Is this insert compatible with standard toolholders for DCMT geometry? Yes; the insert follows the DCMT11T308 geometry and fits standard toolholders designed for this insert format; however, correct clamping and seat condition should be verified before first use. What distinguishes the WPP20G grade from other grades? WPP20G is a coated carbide grade within the Tiger·tec Gold family, tuned for wear resistance and a broad application range in steel turning; it aims to combine durability with consistent cutting-edge performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners; names are mentioned solely for explanatory purposes. There is no association between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
DCMT11T308-MW4 WSM20S MW4 Wendeplatten - Walter Tools
Die Kombination aus robuster Schneidstoffsorte WSM20S und der Tiger·tec Silver-Beschichtung sorgt für sichere Spanbildung bei schwer zerspanbaren Werkstoffen; die Rhombic‑Geometrie mit 0,8 mm Eckenradius erhöht die Prozessstabilität. Bestellen direkt über Metav Werkzeuge oder fragen die Beratenden für optimierte Schnittdaten an. DCMT11T308-MW4 WSM20S Drehwendeschneidplatte von Walter Tools — beschichtetes Hartmetall für rostfreie und hitzebeständige Werkstoffe DCMT11T308-MW4 WSM20S ist eine Wendeschneidplatte für präzises Drehen in anspruchsvollen Anwendungen; geeignet für rostfreie Stähle und Superlegierungen. Tiger·tec Silver coating for thermal stability WSM20S grade for rostfreie Stähle and superalloys MW4 chipbreaker for controlled chip formation Rhombic 55° insert with 0.8 mm corner radius Höhere Prozesssicherheit bei rostfreien Materialien Die Kombination aus der WSM20S-Sortenzusammensetzung und der Tiger·tec Silver-Beschichtung ist speziell auf die Bearbeitung von rostfreiem Stahl und hitzebeständigen Legierungen ausgelegt. Diese Werkstoffgruppe neigt zu Reibung und Aufbauschneiden; die beschichtete Hartmetalllegierung stabilisiert die Schneidkante und reduziert thermische Beanspruchung. Durch kontrollierte Spanbildung wird die Gefahr von Schnittunterbrechungen minimiert, was zu konstanteren Zerspanungsbedingungen und einer verbesserten Oberflächengüte führt. Geometrie und Spanmanagement für effizientes Drehen Die rhombische 55°-Form und der 0,8 mm Eckenradius bieten eine ausgewogene Balance zwischen Robustheit und Schnittschärfe: hohe Kantentragfähigkeit bei gleichzeitig guter Formbarkeit der Schnittkante. Der MW4 chipbreaker unterstützt die definierte Spanabfuhr, was besonders bei hohen Vorschüben und schwer zerspanbaren Werkstoffen die Standzeit erhöht. Für Anwender bedeutet das: stabilere Prozesse, weniger Ausschuss und planbare Nachbearbeitungsschritte. Praxistaugliche Eigenschaften und Einsatzfelder Die Wendeschneidplatte eignet sich für universellen Einsatz im Drehen von rostfreiem Stahl sowie in Anwendungen mit Superlegierungen und Titan. Die T3 Plattendicke und die Ausführung mit positiver Freiwinkelgeometrie ermöglichen kontrollierte Eingriffe und vereinfachen die Einhaltung sicherer Schnittparameter. In der Fertigung sorgt diese Kombination aus Werkstoff und Geometrie für eine erhöhte Produktivität bei gleichbleibender Bauteilqualität. Wirtschaftliche Vorteile und Empfehlungen für die Prozessoptimierung Rationelle Vorteile zeigen sich in längeren Intervallen zwischen Werkzeugwechseln und reduzierten Stillständen. Die Beschichtung verringert thermische Verschleissmechanismen, sodass die Einsatzzeiten im Vergleich zu unbeschichteten Sorten steigen. Für eine optimale Nutzung empfiehlt sich die Abstimmung von Schnittgeschwindigkeit und Vorschub auf den jeweiligen rostfreien Werkstoff; Metav Werkzeuge liefert gern die passenden Schnittdaten zur Integration in den Produktionsprozess. Request cutting data, application advice or place an order for the Walter Tools DCMT11T308-MW4 WSM20S turning insert via Metav Werkzeuge; call +49 2822 7131930 or eMail info@metav-werkzeuge.com for tailored machining support Technical Data Article number: DCMT11T308-MW4-WSM20S-WALTER Name: DCMT11T308-MW4 WSM20S Manufacturer: Walter Tools Product type: Drehwendeschneidplatte Facts Corner radius: 0.8 mm Relief angle: 7° Insert size: 11 Thickness: T3 Shape: Rhombic 55° Special features Coating: Tiger·tec Silver Grade: WSM20S Chipbreaker: MW4 Suitable materials: rostfreier Stahl; Superalloys and Titanium (ISO groups M and S) FAQ What materials is this insert suitable for? The DCMT11T308-MW4 WSM20S insert is designed for rostfreie Stähle and for heat-resistant superalloys and titanium, corresponding to ISO groups M and S. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating on the WSM20S grade reduces thermal wear and helps maintain a stable cutting edge, which improves tool life and process consistency under heavy thermal loads. Which machining tasks benefit most from the MW4 chipbreaker? Turning operations that require defined chip control—deep cuts or high-feed roughing in rostfreiem Stahl and superalloys—benefit from the MW4 chipbreaker’s controlled chip formation. Is the insert suitable for finishing cuts? Yes; the rhombic 55° geometry and 0.8 mm corner radius allow for both robust roughing and accurate finishing passes when cutting parameters are adjusted accordingly. Can standard toolholders accept this insert? The DCMT11T308-MW4 form corresponds to standard indexable insert dimensions; check holder compatibility with the DCMT11T308 profile before assembly. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
DCMT11T308-RK4 WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, optimised chip control and consistent edge life for efficient machining of cast iron. Order the DCMT11T308-RK4 WKK10S indexable insert directly via Metav Werkzeuge or ask the consultants for application support. DCMT11T308-RK4 WKK10S – Indexable turning insert, Rhombus 55°, for cast iron · Walter Tools DCMT11T308-RK4 WKK10S is a coated carbide indexable insert engineered for productive turning of cast iron components in industrial metal‑cutting operations High wear resistance with Tiger‑tec Silver Optimised RK4 chipbreaker for cast iron Rhombic 55° geometry for flexible turning 0.8 mm corner radius for robust edge stability Consistent machining performance for cast iron components The insert delivers predictable performance on abrasive cast iron thanks to the Tiger‑tec Silver coating and the WKK10S carbide grade. The coating improves resistance to abrasive wear while the grade balances toughness and edge retention, resulting in longer service intervals and fewer index changes. With the RK4 chipbreaker, the insert controls short, brittle chips typical of cast iron, reducing interruptions and improving process stability. This leads to higher machine utilisation and a smoother production flow for series and batch turning operations. Geometry engineered for dimensional reliability and surface quality A rhombic 55° insert geometry combined with a 7° clearance angle and a 0.8 mm corner radius provides a strong, reliable cutting edge that tolerates interruptions and deflections. The combination of geometry and edge preparation supports consistent component tolerances and an improved surface finish under varying cutting conditions. The tolerance class M ensures reproducible form and fit when using standard toolholders, making the insert suitable for repeatable production processes and tool management systems. Practical process advantages and integration into tooling systems Specified as a coated carbide insert from the Tiger‑tec Silver series, the design focuses on abrasion resistance and efficient chip control when machining cast iron. The insert thickness T3 and plate size code 11 suit common toolholder interfaces and make replacement straightforward within established tooling inventories. As an indexable solution, the insert reduces tooling cost per part compared with solid‑carbide alternatives and simplifies on‑machine reversal of cutting edges, supporting both economical and flexible manufacturing. For engineers and process planners, the insert represents a balance of life, performance and predictable behaviour in demanding cast iron applications. Contact Metav Werkzeuge for tailored advice on using the Walter Tools DCMT11T308-RK4 WKK10S insert in specific cast iron operations and to secure genuine parts and compatible holders Technical data SKU: DCMT11T308-RK4-WKK10S-WALTER Label: Drehwendeschneidplatte DCMT11T308-RK4 WKK10S Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger‑tec Silver Grade: WKK10S Chipbreaker: RK4 Form: Rhombus 55° Execution: T Core data Clearance angle: 7° Corner radius: 0.8 mm Plate size: 11 Thickness: T3 Tolerance class: M Special features Coated carbide grade designed for abrasive wear resistance Optimised chip control for short, breaking chips in cast iron Suitable for machining cast iron (ISO group K) Robust edge for interrupted cuts and reliability in production FAQ What materials is this insert suitable for? The WKK10S grade of the DCMT11T308‑RK4 insert is designed primarily for machining cast iron (ISO group K), with coating and geometry tuned to handle abrasive wear and short, breaking chips. What coating and carbide grade does this insert use? The insert belongs to the Tiger‑tec Silver series and carries the WKK10S coated carbide grade, providing improved wear resistance and consistent edge life on cast iron. Which geometry and chipbreaker are used for chip control? A rhombic 55° shape with a 7° clearance angle, a 0.8 mm corner radius and the RK4 chipbreaker combine to produce controlled, short chips and stable cutting forces during turning. Can this insert be used for roughing and finishing operations? The DCMT11T308‑RK4 WKK10S is optimised for general turning of cast iron. Its wear‑resistant character suits extended roughing runs, while geometry and edge preparation support acceptable finishing results in many applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and designations are used for explanation only. There is no affiliation between our company and the named brands; the offered item is an original, factory‑new product of the manufacturer.
DCMT11T308-RK4 WKK20S WKK20S Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating with the RK4 chipbreaker yields robust wear resistance and reliable chip control when machining cast iron; the rhombic 55° geometry and 0.8 mm corner radius contribute to consistent surface finishes. Order the insert directly via Metav Werkzeuge or consult our application specialists for process optimisation. DCMT11T308-RK4 WKK20S indexable turning insert — Tiger·tec Silver for cast iron, Walter Tools The DCMT11T308-RK4 WKK20S is an indexable turning insert designed for productive cast iron machining, offering a coated-carbide grade optimised for abrasive wear and short, breaking chips. Tiger·tec Silver coating for long tool life Optimised RK4 chipbreaker for cast iron Rhombic 55° geometry for versatile turning 0.8 mm corner radius for consistent surface finish Higher uptime through abrasion-resistant grade and coating The combination of the WKK20S grade and the Tiger·tec Silver coating focuses on extending tool life under abrasive conditions typical of cast iron. This coated carbide composition is engineered to resist abrasive wear while maintaining a stable cutting edge, which reduces the frequency of index changes and unscheduled interruptions. For production environments, this translates into improved process stability and predictable tool consumption, supporting efficient planning and lower overall machining costs. Reliable chip control and improved surface quality With the RK4 chipbreaker and a rhombic 55° form, the insert provides controlled chip formation on grey and nodular cast irons. The 7° relief angle and a 0.8 mm corner radius balance strength and fineness of finish: the geometry favours secure cutting with reduced vibration while the radius supports a consistent surface result without aggressive tool stress. These properties help maintain machining quality across varying cast iron batches and reduce rework. Practical compatibility and simple integration into toolsets The DCMT designation and T3 plate thickness make the insert compatible with common DCMT toolholders, allowing quick indexing and straightforward replacement. Its tolerance class M ensures interchangeability and repeatable positioning in clamping systems. By combining proven geometry with a universal chipbreaker for cast iron, the insert supports versatile turning operations while simplifying inventory: fewer grades are required to cover a broad range of cast-iron applications. Secure process-stable Walter Tools inserts via Metav Werkzeuge — contact Metav Werkzeuge for tailored application advice and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: DCMT11T308-RK4-WKK20S-WALTER Article designation: DCMT11T308-RK4 WKK20S Product type: indexable turning insert Manufacturer: Walter Tools Facts Size: 11 Thickness: T3 Relief angle: 7° Corner radius: 0.8 mm Geometry: Rhombic 55° Tolerance class: M Special features Grade: WKK20S (Tiger·tec Silver) Coated carbide Chipbreaker: RK4 Suitable for cast iron FAQ Is this insert suitable for machining cast iron? Yes. The WKK20S grade with Tiger·tec Silver coating and the RK4 chipbreaker are specifically optimised for cast iron machining, addressing abrasive wear and short, breaking chips. Which toolholders are compatible with this insert? The insert follows the DCMT form and is intended for standard DCMT-compatible toolholders; indexing allows use of subsequent cutting edges to extend service life. What surface quality can be expected with the 0.8 mm corner radius? A 0.8 mm corner radius provides a balance between strength and finish, enabling a stable cutting edge that supports consistent surface quality on cast-iron workpieces. Is the insert interchangeable in multi-insert tool assemblies? Yes. The tolerance class M supports consistent positioning and repeatable clamping in compatible toolholder systems. For which chip formation scenarios is the RK4 chipbreaker optimised? The RK4 chipbreaker is designed to control chips typical of cast iron turning, promoting short, controllable chips and minimising chip-related disruptions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT11T308-RM4 WMP20G RM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold WMP20G coating for secure chip formation and the RM4 chipbreaker geometry to ensure consistent turning of stainless steels; order directly via Metav Werkzeuge or consult the team for tailored advice. DCMT11T308-RM4 WMP20G indexable turning insert by Walter Tools — 7° clearance, 0.8 mm nose radius DCMT11T308-RM4 WMP20G is an indexable turning insert designed for reliable machining of stainless steels in medium to robust conditions DCMT11T308-RM4 geometry for stable cutting Tiger·tec Gold WMP20G coating for stainless steel RM4 chipbreaker for secure chip control 7° clearance and 0.8 mm nose radius Consistent chip control for continuous production The combination of the RM4 chipbreaker and the Tiger·tec Gold WMP20G coating provides stable chip formation when machining stainless steels, reducing the risk of built-up edge and erratic evacuations. This leads to fewer interruptions, less manual chip handling and a more predictable machining cycle. The RM4 geometry is optimised to break chips reliably under varying cutting depths and feeds, which contributes directly to higher machine uptime and improved process stability in production environments. Coating and grade deliver durable cutting performance The WMP20G grade is a coated carbide specifically tuned for the challenges of machining stainless steel: toughness, work hardening and heat generation. The Tiger·tec Gold technology enhances wear resistance and maintains a sharp cutting edge for longer periods, so the insert sustains dimensional accuracy over multiple parts. This means fewer tool changes and more parts per tool life, translating into reduced tooling costs and higher throughput for batch and continuous turning operations. Geometry that balances strength and surface quality With a 0.8 mm nose radius and 7° clearance, the insert offers a compromise between robust cutting edge strength and good surface finish. The Rhombus 55° form provides positive plunge and ease of approach on various toolholders, while the specified thickness (T3) contributes to a stable seat in the pocket. Together these attributes enable steady contact conditions at the cutting edge, which helps to achieve consistent component geometry and surface integrity, particularly important when tight tolerances are required. Practical application advice for workshop integration The insert is suited to medium and robust turning tasks on stainless steels (ISO group M). For best results, pair the insert with appropriate coolant strategies and moderate cutting speeds to avoid excessive thermal loading; the coated grade tolerates heat but steady thermal control improves lifetime. Toolholders compatible with DCMT indexing and a secure clamping system will preserve the insert’s seating and maintain repeatability across tool changes. For shops looking to increase productivity, the grade and chipbreaker support longer uninterrupted runs and lower scrap rates. For machining stainless steels with proven chip control and wear resistance, contact Metav Werkzeuge for the Walter Tools DCMT11T308-RM4 WMP20G insert and request personalised recommendations by email or phone. Technical data SKU: DCMT11T308-RM4-WMP20G-WALTER Article designation: DCMT11T308-RM4 WMP20G Manufacturer: Walter Tools Facts Clearance angle: 7° Nose radius: 0.8 mm Insert size: 11 mm Thickness: T3 Shape: Rhombus 55° Special features Coating: Tiger·tec Gold (WMP20G) Chipbreaker: RM4 Material application: stainless steels (ISO group M) Series: Tiger-tec Gold Suitability: medium to robust cutting conditions FAQ What materials is this insert suitable for? The DCMT11T308-RM4 WMP20G insert is intended primarily for stainless steels (ISO group M) and performs well under medium to robust cutting conditions due to the WMP20G coated grade. How does the RM4 chipbreaker help production? The RM4 chipbreaker promotes controlled chip formation and evacuation, reducing stoppages and manual intervention in turning operations when using this Walter Tools indexable insert. What are the key geometry features to consider? Key geometry features include the 0.8 mm nose radius and 7° clearance, which balance cutting-edge strength with surface finish and provide stable seating in suitable toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (branded as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the manufacturers named. The offered item is an original, brand-new product from the manufacturer.
DCMT11T308-RM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of a coated carbide grade and a proven RM4 chipbreaker to achieve stable chip formation and consistent edge life when machining stainless steels; order the insert directly via Metav Werkzeuge or consult the application specialists for process integration. DCMT11T308-RM4 WMP20S indexable turning insert, Rhombus 55° — for stainless steel, Walter Tools A DCMT11T308-RM4 WMP20S indexable turning insert designed for machining stainless steel in medium to robust turning operations, combining Tiger·tec Silver coating technology with a purpose-built RM4 chipbreaker for secure chip control. Tiger·tec Silver coated carbide grade WMP20S Optimised RM4 chipbreaker for stable chips Rhombic 55° geometry for versatile turning 0.8 mm corner radius for robust edge life Reliable chip control for demanding stainless-steel turning The combination of the RM4 chipbreaker and the Tiger·tec Silver coating offers a focused solution for the typical challenges of machining stainless steel: tendency to form long, stringy chips, build-up on the edge and high thermal loading. The chipbreaker geometry is engineered to divide and eject chips efficiently, reducing the risk of re-cutting and tool damage. As a result, cycle times remain stable and tool changes are less frequent, which supports continuous production runs. Practical benefits include improved process security and a more consistent surface condition on the workpiece, without altering existing machine or clamping setups. Geometry and edge strength for consistent tool life The Rhombic 55° insert form and a 0.8 mm corner radius create a robust cutting edge suited to medium and heavier depth-of-cut applications. The 55° point gives good access for external and certain internal turning operations while balancing cutting forces and edge strength. The indicated 7° relief angle helps avoid rubbing on the flank face and supports reliable contact conditions under variable cutting loads. Together, these geometric choices reduce the likelihood of premature edge failure and enable steady wear behaviour, which simplifies process planning and spare-part management. Material grade and production advantages in series use The WMP20S grade, produced within the Tiger·tec Silver series, is a coated carbide designed specifically for ISO group M (stainless steels). This makes the insert particularly suitable where a combination of stable chip formation and robust cutting edges is required. In practice, shops find that inserts of this specification maintain dimensional consistency over runs, allowing longer tool life per index and fewer interruptions. For workshops aiming to increase throughput without compromising surface quality, the insert supports dependable repeatability and ease of integration into established tool holders and turning programmes. For process-secure machining of stainless steel with Walter Tools’ DCMT11T308-RM4 WMP20S, contact Metav Werkzeuge to discuss supply and application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: DCMT11T308-RM4-WMP20S-WALTER Designation: DCMT11T308-RM4 WMP20S Manufacturer: Walter Tools Series: Tiger·tec Silver Numbers / Core technical data Relief angle: 7° Corner radius: 0.8 mm Geometry: Rhombus 55° Insert size: 11 mm Thickness: T3 Chipbreaker: RM4 Tolerance class: M Design / Special features Coating: Tiger·tec Silver Grade: WMP20S (coated carbide) Application: stainless steel (ISO group M) Robust edge for medium to heavy conditions Suitable for turning operations FAQ What materials is this insert intended for? The DCMT11T308-RM4 WMP20S is specified for ISO group M and is optimised for machining stainless steel in medium to robust conditions. Which chipbreaker does the insert use and why does it matter? This insert features the RM4 chipbreaker; it improves chip control and reduces the risk of build-up and re-cutting during stainless-steel turning. What are the key geometric specifications of the insert? The insert is a rhombic 55° form with a 0.8 mm corner radius and a 7° relief angle, designed to balance cutting strength and accessibility. Is the insert part of a coated series and what is the benefit? Yes — the insert belongs to the Tiger·tec Silver series; the coating supports thermal stability, wear resistance and reliable performance in stainless-steel applications. Walter Tools — The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners. The mentioned brand is cited solely for explanation; there is no affiliation between Metav Werkzeuge and the trademark owners.
DCMT11T308-RM4 WMP30G WMP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and the RM4 chipbreaker for secure machining of stainless steel; the compact Rhombus 55° geometry with a 0.8 mm corner radius ensures reliable edge life and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult the Metav team for application advice. DCMT11T308-RM4 WMP30G — indexable turning insert for stainless steel, Rhombus 55°, Walter Tools The DCMT11T308-RM4 WMP30G is an indexable turning insert designed for medium to robust conditions when machining stainless steel, featuring a dedicated RM4 chipbreaker and Tiger·tec Gold coating for improved process security Tiger·tec Gold coated carbide grade WMP30G Optimised RM4 chip control for tough materials Rhombus 55° geometry, 0.8 mm corner radius Suitable for machining stainless steel Increased process security and consistent tool life The combination of the Tiger·tec Gold technology and the WMP30G grade provides a high degree of wear resistance and thermal stability in demanding turning operations. Coated carbide substrates in this series are engineered to mitigate common issues when cutting stainless steel, such as edge build-up and rapid heat concentration. The Rhombus 55° form and the small 0.8 mm corner radius support reproducible cutting forces and help maintain dimensional stability on stepped or contoured parts. For production-focused workshops, this translates into fewer interruptions for tool changes and more consistent part quality. Controlled chip formation and improved surface finish The insert’s RM4 chipbreaker is optimised to produce short, manageable chips under medium to robust cutting conditions, reducing the risk of entanglement and improving operator safety. With a free cutting angle of 7° and the insert’s geometry tuned for stainless applications, the result is a smoother surface and reduced tendency for built-up edge. By adopting this insert in appropriate cutting windows, cycle times remain competitive while tool life is extended, supporting both productivity and process repeatability. Practical guidance for integration into workflows Designed as a versatile option for rotating operations, the insert fits standard toolholders compatible with the DCMT form factor and a plate size of 11. The T3 plate thickness and the Rhombus 55° outline allow secure clamping and predictable engagement in interrupted cuts. For workshops seeking immediate improvements in stainless steel turning, pairing the insert with stable clamping, correct coolant strategy or appropriate cutting speeds for the material class will deliver the best balance between performance and tool economy. For detailed parameter windows or material-specific recommendations, technical consultation is available. Contact Metav Werkzeuge to discuss the Walter Tools DCMT11T308-RM4 WMP30G for specific stainless steel applications, request batch availability, or obtain tailored processing tips via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DCMT11T308-RM4-WMP30G-WALTER Designation: DCMT11T308-RM4 WMP30G Product type: indexable turning insert / Drehwendeschneidplatte Series: Tiger-tec Gold Grade: WMP30G Manufacturer: Walter Tools Facts Plate size: 11 Corner radius: 0.8 mm Free cutting angle: 7° Plate form: Rhombus 55° Thickness: T3 Special features Chipbreaker: RM4 Material group: M (stainless steel) Coating/technology: Tiger·tec Gold (coated carbide) Application: medium to robust cutting conditions for stainless steel FAQ What materials is this insert intended for? The DCMT11T308-RM4 WMP30G is specified for machining stainless steel and performs reliably under medium to robust cutting conditions. How does the RM4 chipbreaker improve machining? The RM4 chipbreaker promotes short, controllable chips during turning, which reduces chip handling issues and supports consistent surface finish with the WMP30G grade. What does the 0.8 mm corner radius mean for part quality? A 0.8 mm corner radius offers a balanced edge strength and surface finish, helping to maintain dimensional accuracy while providing reasonable edge stability during interrupted cuts. Is the insert compatible with standard DCMT toolholders? Yes, the insert conforms to the DCMT form and fits toolholders designed for that geometry and the specified plate size. Which series and coating technology is used on this grade? The insert belongs to the Tiger·tec Gold series and is supplied in the WMP30G coated carbide grade for enhanced wear resistance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT11T308-RM4 WSM10S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, precise chip control and broad material capability for more productive turning operations; order directly via Metav Werkzeuge or consult our technical advisors for tailored application advice. DCMT11T308-RM4 WSM10S – turning insert (DCMT11T308-RM4, WSM10S) for rostfreier Stahl and high-temperature alloys by Walter Tools The DCMT11T308-RM4 WSM10S is an indexable turning insert with Rhombic 55° geometry, designed for reliable performance when machining rostfreier Stahl and heat‑resistant superalloys in demanding industrial turning applications. Tiger·tec Silver coating for long tool life Optimised RM4 chipbreaker for secure chip control Rhombic 55° geometry with 0.8 mm nose radius Suited for rostfreier Stahl and heat‑resistant alloys Enhanced reliability for tough materials and stable cutting edges The Tiger·tec Silver coating combined with the WSM10S grade offers enhanced wear resistance and thermal stability when facing the adhesion and heat problems typical of rostfreier Stahl and superalloys. The coated cemented carbide composition is tailored to reduce build‑up edge and to preserve the cutting edge stability over longer cycles. For operations where tool-life and repeatability reduce setup frequency and rework, this insert delivers measurable gains in uptime and process consistency. Secure chip control that improves machining quality The RM4 chipbreaker is optimised for controlled chip formation with the Rhombic 55° geometry, helping to avoid entangling long swarf and to promote continuous evacuation. Controlled chips reduce interruptions and protect the toolholder and workpiece from surface damage; the result is a better surface finish and fewer secondary operations. For operators transitioning from conventional grades, the insert’s geometry and chip control simplify parameter selection and lower the risk of adverse cutting phenomena. Versatile geometry for economical, precise turning With a 0.8 mm nose radius and a modest relief angle of 7°, the insert balances profile accuracy and tool robustness: the nose radius supports good corner strength and finer surface integrity while the plate thickness (T3) and tolerance class M ensure consistent clamping and repeatable results. The Rhombic 55° form enables a variety of turning tasks from finishing to medium cuts, reducing the need for multiple specialised inserts and supporting a more economical tooling strategy. Discuss Walter Tools’ Tiger·tec Silver inserts with Metav Werkzeuge for tailored rostfreier Stahl machining solutions — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DCMT11T308-RM4-WSM10S-WALTER Designation: DCMT11T308-RM4 WSM10S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM10S Product type: turning insert Facts Relief angle: 7° Corner radius: 0.8 mm Geometry: Rhombic 55° Insert size: 11 Thickness: T3 Tolerance class: M Materials & features Coating: Tiger·tec Silver Chipbreaker: RM4 Material groups: S / M Application: rostfreier Stahl and heat‑resistant superalloys Execution/form: T FAQ What materials is this insert best suited for? The DCMT11T308-RM4 WSM10S insert is optimised for rostfreier Stahl (ISO group M) and heat‑resistant superalloys (ISO group S), offering thermal stability and reliable chip control. How does the Tiger·tec Silver coating benefit production? Tiger·tec Silver on the WSM10S grade increases wear resistance and reduces tendency to form build‑up edge, which translates into longer tool life and more consistent component quality. Which chipbreaker should be selected for long, continuous turning? The RM4 chipbreaker integrated in this insert provides controlled chip formation suitable for continuous turning, improving swarf evacuation and reducing machining interruptions. Can this insert be used for both finishing and medium machining? Yes; the Rhombic 55° geometry with a 0.8 mm nose radius and a 7° relief angle offers a compromise between finish capability and edge strength, allowing use across finishing and medium cutting tasks. Is the insert compatible with standard toolholders? The DCMT form and tolerance class M are designed for standard indexable turning toolholders; ensure correct clamping and manufacturer recommended inserts seats for optimum repeatability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT11T308-RM4 WSM20S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of high process security, optimised chip control and durable Tiger·tec Silver coating for consistent results in machining stainless steel and superalloys; order directly via Metav Werkzeuge or request expert advice from the sales engineers. DCMT11T308-RM4 WSM20S indexable insert — Tiger·tec Silver for stainless steel — Walter Tools DCMT11T308-RM4 WSM20S is a rhombic 55° indexable insert designed for demanding turning operations in stainless steel and heat-resistant superalloys Tiger·tec Silver coated for extended edge life Optimised RM4 chip control for stable cutting Rhombus 55° geometry for versatile turning 0.8 mm corner radius for improved strength High-performance cutting for difficult-to-machine alloys The WSM20S grade, based on Walter Tools’ Tiger·tec Silver coating technology, is formulated for machining stainless steel and heat-resistant superalloys. Its combination of a coated-carbide substrate and advanced surface layers promotes stable chip formation and reduces built-up edge under thermal stress. For production environments where reproducible component quality and predictable tool life are required, this insert supports consistent throughput with fewer interruptions and reduced rework Coating and edge life that pay off in practice A modern coated carbide grade provides both thermal protection and mechanical strength; the Tiger·tec Silver system is engineered to resist crater wear and flank degradation during prolonged contact with hot, adhesive materials. The insert’s 0.8 mm corner radius increases edge robustness, leading to improved surface integrity and fewer edge failures on interrupted cuts. This results in lower tool consumption per part and a measurable improvement in overall machining economy Geometry and chip control for dependable process behaviour The rhombic 55° shape and RM4 chipbreaker deliver controlled chip segmentation and reliable chip evacuation across a range of feeds. Combined with the insert’s clearance angle of 7° and its T3 thickness, the geometry provides a predictable contact pattern that reduces vibration and supports fine surface finishes. These geometric characteristics make the insert suitable for medium-duty finishing and general turning tasks where dimensional stability matters Application guidance and system compatibility Recommended for the ISO material groups M (stainless steels) and S (heat-resistant superalloys and titanium), the insert performs best when paired with rigid toolholders and stable machine setups. The specifier benefits from a solution that balances wear resistance with edge stability, especially on components where thermal loading is high. For detailed holder matching and optimal cutting parameters, Metav Werkzeuge’s technical consultants can provide tailored recommendations based on the machining scenario Contact Metav Werkzeuge for application-specific recommendations or order the Walter Tools DCMT11T308-RM4 WSM20S insert through Metav Werkzeuge to ensure the correct grade and geometry for precision stainless steel turning Technical Data Article number: DCMT11T308-RM4-WSM20S-WALTER Brand: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Chipbreaker: RM4 Facts Corner radius: 0.8 mm Clearance angle: 7° Insert size: 11 Shape: Rhombus 55° Thickness: T3 Tolerance class: M Special features Coated carbide grade WSM20S Tiger·tec Silver coating technology Suitable for stainless steel and superalloys (ISO M and S) Optimised RM4 chip control Robust 0.8 mm corner for increased edge life FAQ What materials is this insert designed for? The DCMT11T308-RM4 WSM20S insert is designed primarily for machining stainless steel and heat-resistant superalloys, matching the ISO material groups M and S How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating on the WSM20S grade increases thermal and wear resistance, which helps maintain a stable cutting edge and reduces the frequency of insert changes during continuous production Which geometry features support surface finish and stability? The rhombic 55° shape, 0.8 mm corner radius and RM4 chipbreaker combine to reduce vibration and control chip formation, contributing to consistent surface quality and dimensional stability Is this insert compatible with common turning toolholders? The insert follows standard DCMT indexing dimensions and is compatible with toolholders that accept DCMT11-format inserts; confirm holder clamping and seat compatibility before use Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DCMT11T308-RM4 WSM30S RM4 Wendeplatten - Walter Tools
Take advantage of the combination of a heat-resistant, coated carbide grade and an optimised chipbreaker for reliable performance with demanding materials; order directly via Metav Werkzeuge or contact their consultants for application-specific advice. DCMT11T308-RM4 WSM30S turning insert — Tiger·tec Silver, Walter Tools The DCMT11T308-RM30S WSM30S is a rhombic 55° turning insert designed for secure chip control and stable cutting when machining rostfreie Stähle and high-temperature alloys in production environments. *Tiger·tec Silver coated carbide grade WSM30S *Optimised RM4 chipbreaker for secure chip control *Rhombic 55° insert with 0.8 mm corner radius *7° clearance angle for stable cutting geometry High-performance cutting for difficult-to-machine materials The coated carbide grade WSM30S from Walter Tools is developed for demanding cuts in rostfreie Stähle and heat-resistant superalloys. Its combination of a tough substrate and the Tiger·tec Silver coating increases resistance to thermal and mechanical loading, which translates into longer intervals between indexings and fewer tool changes. For production, this means better process stability and predictable component tolerances when machining materials that typically cause built-up edge or rapid tool wear. Geometry that ensures consistent chip control and surface quality The insert’s RM4 chipbreaker is engineered to break and evacuate chips reliably under a range of cutting conditions, reducing the risk of entanglement and improving surface integrity. The rhombic 55° shape offers positive cutting engagement for facing and turning operations, while the 0.8 mm corner radius balances edge strength with achievable surface finish. Together, these geometric choices contribute to repeatable results and reduced secondary operations. Coating and grade for extended tool life and productivity The Tiger·tec Silver coating provides a thermal barrier and improved friction characteristics, which help maintain a stable cutting edge even under elevated temperatures typical of machining stainless steels and nickel-based alloys. The coated carbide composition promotes reliable chip formation and supports higher cutting speeds where process planning allows, resulting in better throughput without sacrificing component quality. Practical integration into machining workflows Available in the common DCMT format with T3 thickness and size 11, this insert fits many standard toolholders and clamping systems, simplifying stocking and tool change procedures. The combination of robust edge geometry and coating technology is particularly suitable for batch production and mixed-series machining where consistency and predictable tool life reduce downtimes and planning overhead. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts, application suitability checks, or to arrange sample trials via Metav Werkzeuge. Technical Data Article number: DCMT11T308-RM4-WSM30S-WALTER Designation: DCMT11T308-RM4 WSM30S Brand: Walter Tools Series: Tiger-tec Silver Grade: WSM30S Facts Clearance angle: 7° Corner radius: 0.8 mm Insert form: Rhombus 55° Insert size: 11 Thickness class: T3 Special features Coating: Tiger·tec Silver Chipbreaker: RM4 Material group suitability: S / M Recommended for: rostfreie Stähle and heat-resistant superalloys Application focus: secure chip formation, stable cutting edge FAQ What materials is this insert suitable for? The insert is specified for rostfreie Stähle and heat-resistant superalloys; the WSM30S grade and Tiger·tec Silver coating support secure chip formation and edge stability in these materials. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker promotes controlled chip breakage and evacuation, which reduces the risk of chip entanglement and contributes to consistent surface quality with this turning insert. Is this insert compatible with standard DCMT toolholders? Yes — the product follows the common DCMT 11 form and T3 thickness, making it compatible with many standard toolholders designed for rhombic 55° inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; Walter Tools is a brand of Walter AG, part of the Sandvik Group Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the respective manufacturer.
DCMT11T308-RP4 WPP10G WPP10G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating, the RP4 chipbreaker and a 0.8 mm corner radius for steady productivity and reliable chip control; order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. DCMT11T308-RP4 WPP10G turning insert — Walter Tools, Tiger·tec Gold coated, RP4 chipbreaker DCMT11T308-RP4 WPP10G is a precision turning insert designed for general and finishing turning of steels, offering a balanced combination of wear resistance and chip control. Tiger·tec Gold coating for long tool life RP4 chipbreaker for predictable chips 55° rhombus geometry for versatile turning 0.8 mm corner radius for fine surface finishes Consistent productivity through advanced coating and geometry The combination of the Tiger·tec Gold coating and a carefully engineered cutting geometry delivers measurable productivity gains in serial turning operations. As a coated carbide solution, this insert reduces flank wear and maintains edge integrity under continuous loading, which translates into longer tool cycles and fewer indexings. The RP4 chipbreaker supports stable chip formation when machining Stahl, reducing the need for manual chip handling and improving uptime. Precision geometry that improves surface quality and process reliability A 55° rhombus shape paired with a 0.8 mm corner radius and a 7° relief angle provides a reliable balance between strength and sharpness. The geometry minimises vibration and helps maintain consistent cutting conditions across repeated passes, which benefits surface finish and dimensional stability. The T3 thickness contributes to insert rigidity; together these features support controlled material removal with predictable forces and less risk of edge chipping. Universal grade tailored for Stahl applications The WPP10G grade, part of Walter Tools' Tiger·tec Gold line, is a versatile, coated carbide composition optimised for turning Stahl. It combines wear resistance with a degree of toughness suitable for a wide range of general-purpose turning tasks. For shops processing mixed batches of unalloyed and alloyed Stahl, this grade offers reliable performance and a wide useful life, lowering tooling costs per component by extending the effective cutting time between indexings. Practical machining advantages and selection guidance The insert’s RP4 chipbreaker is designed for consistent chip segmentation in medium to light turning, which supports automated workflows and reduces the risk of chip entanglement. Choose feeds and speeds aligned with the workpiece hardness and the machining strategy: the combination of the coating, grade and geometry aims to reduce thermal loading and preserve the cutting edge. For demanding finishing passes the modest corner radius enables fine surface results, while the rhombic shape gives flexibility for both external and light internal turning tasks. Contact Metav Werkzeuge for tailored advice on Walter Tools Tiger·tec Gold inserts and to check availability; the Metav technical team is available by eMail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: DCMT11T308-RP4-WPP10G-WALTER Designation: DCMT11T308-RP4 WPP10G Series: Tiger-tec Gold Grade: WPP10G Manufacturer: Walter Tools Core data Plate size: 11 Relief angle: 7° Corner radius: 0.8 mm Plate form: Rhombus 55° Thickness: T3 Tolerance class: M Materials & features Suitable for Stahl Chipbreaker: RP4 Coating: Tiger·tec Gold (coated carbide) Grade material designation: P Execution: T FAQ What materials is this insert suitable for? The Walter Tools DCMT11T308-RP4 WPP10G insert is formulated primarily for machining Stahl, offering good wear resistance and reliable cutting behaviour on unalloyed and alloyed steels. Which machining tasks is the insert best suited to? This insert excels in general turning and finishing operations where consistent chip control and surface quality are required; the RP4 chipbreaker supports medium to light turning strategies. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating improves wear resistance and reduces thermal damage to the cutting edge, which typically extends effective tool life and maintains process stability for longer cycles. What advantage does the 0.8 mm corner radius provide? A 0.8 mm corner radius balances edge strength with the ability to achieve fine surface finishes, reducing the likelihood of edge chipping while enabling smoother part surfaces on finishing passes. How does the RP4 chipbreaker influence chip formation? The RP4 chipbreaker produces predictable, segmented chips that are easier to manage in automated or manual machining set-ups, improving process safety and reducing interruptions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the trademark owners. The offered article is an original, factory-new product of the respective manufacturer. The Walter AG (brand presentation: Walter Tools) is a leading manufacturer of precision tools for metalworking and part of the Sandvik Group.
DCMT11T308-RP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, optimised RP4 chip control and a rhombic 55° geometry to achieve stable, productive turning of steel components; order directly via Metav Werkzeuge or request application advice from the consultants at Metav Werkzeuge. DCMT11T308-RP4 WPP20G indexable turning insert — Tiger·tec Gold, for steel — Walter Tools A DCMT11T308-RP4 WPP20G indexable turning insert engineered for reliable steel turning with a rhombic 55° geometry and optimised chip control Tiger·tec Gold coating for enhanced wear resistance Optimised RP4 chipbreaker for reliable chip control Rhombic 55° geometry for versatile turning operations Corner radius 0.8 mm for robust cutting edges Longer tool life through advanced coating technology The insert is equipped with Tiger·tec Gold, a high-performance coating designed to extend tool life under the thermal and mechanical demands of machining steel. The coating’s combination of thermal stability and low friction reduces flank wear and minimizes adhesion, which leads to fewer interruptions for tool changes and higher process efficiency. For production environments, this results in improved productivity and predictable tool consumption, supporting leaner planning and reduced tooling costs. Stable chip formation and improved surface quality An optimised RP4 chipbreaker delivers consistent chip shaping and evacuation when machining steels, reducing the risk of built-up edge and erratic cutting forces. Stable chips protect the component surface and the machine spindle, contributing to a more consistent surface finish and reduced rework. The chip geometry favours continuous, controllable chips in common steel grades, supporting higher cutting data and better process security in series production. Geometry that balances reach and edge strength The rhombic 55° insert form and a relief angle of 7° enable a versatile approach to external turning tasks while maintaining cutting-edge strength. The corner radius 0.8 mm provides a compromise between edge robustness and fine surface generation, suitable for general-purpose turning and finishing passes. The insert’s size 11 and T3 thickness contribute to sturdy clamping and reliable repeatability, especially under moderate to demanding cutting conditions. Designed for reliable steel machining and simple integration Classified for the material group P (steel) and made from a coated carbide grade, the insert supports a broad range of unalloyed and alloyed steels per ISO 513 recommendations. The tolerance class M ensures consistent geometry across batches, aiding predictable setup and reducing adjustment time at the turret. As a standardized indexable solution, this insert integrates into common toolholders and is suitable for workshops aiming for reproducible process results and efficient tool management. Contact Metav Werkzeuge for tailored application recommendations on Walter Tools turning inserts and for assistance in selecting the right grade and chipbreaker for specific steel turning tasks Technical data Article number: DCMT11T308-RP4-WPP20G-WALTER Label: Drehwendeschneidplatte DCMT11T308-RP4 WPP20G Walter Tools Product type: Drehwendeschneidplatte (indexable turning insert) Facts Insert size: 11 Thickness: T3 Relief angle: 7° Corner radius: 0.8 mm Geometry: Rhombus 55° Chipbreaker: RP4 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP20G (coated carbide) Application group: P (steel) Series: Tiger-tec Gold Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The DCMT11T308-RP4 WPP20G is specified for the material group P, suitable for machining unalloyed and alloyed steel grades as defined in ISO 513. How does the RP4 chipbreaker benefit production? The RP4 chipbreaker on the DCMT11T308-RP4 WPP20G promotes controlled chip formation, which improves process security and helps achieve a consistent surface finish during steel turning. What does the Tiger·tec Gold coating mean for tool life? The Tiger·tec Gold coating reduces flank wear and friction under common steel turning conditions, extending the service life of the insert and enabling higher productivity with fewer tool changes. Is this insert compatible with standard toolholders? The rhombic 55° geometry and standard DCMT designation allow the insert to be used in widely available toolholders designed for DCMT-format indexable inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, brand-new goods from the manufacturer.
DCMT11T308-RP4 WPP30G RP4 Wendeplatten - Walter Tools
Take advantage of a high-performance turning insert that pairs the Tiger·tec Gold coating with a wear-resistant grade to deliver stable chip formation and predictable tool life when machining steel; excellent geometry ensures surface quality and process reliability. Order directly via Metav Werkzeuge or consult our experts for application-specific recommendations. DCMT11T308-RP4 WPP30G — indexable turning insert for steel by Walter Tools (Tiger·tec Gold, rhombus 55°) A DCMT11T308-RP4 WPP30G indexable turning insert designed for reliable steel machining with a Tiger·tec Gold coated carbide grade, optimised for stable cutting and long tool life. Tiger·tec Gold coating for heat resistance Grade WPP30G optimised for steel Rhombus 55° geometry for versatile turning 7° clearance and 0.8 mm corner radius Proven coating technology for tougher steel turning The Tiger·tec Gold coating on this insert delivers improved thermal stability and oxidation resistance compared with conventional coatings, which translates into consistent edge life when machining steels. The coated carbide substrate is engineered to withstand the typical heat and chip conditions encountered in steel turning, reducing flank wear and preserving dimensional accuracy over longer tool cycles. This makes the insert particularly suitable for medium to heavy turning operations where repeatable results and reduced tool changes are priorities. Geometry and chip control that improve surface quality A rhombus 55° shape combined with a 0.8 mm corner radius and 7° clearance provides a stable cutting edge that supports good surface finish while allowing flexible approach angles. The RP4 chipbreaker is tuned for steel machining, encouraging controlled chip formation and evacuation to minimise built-up edge and rework. These geometric features help to lower machining forces and contribute to a predictable process, which benefits cycle-time planning and downstream operations. Economic performance through wear resistance and repeatability The WPP30G grade focuses on wear resistance and balanced toughness, offering an economical compromise between tool life and productivity for steel applications. Due to the coating technology and substrate composition, the insert supports longer tool intervals and more consistent part quality, reducing unplanned stoppages. This predictability helps to lower unit costs and supports higher overall throughput in serial production environments. Practical integration for workshop workflows With a size 11 format and T3 thickness, the insert integrates easily into standard turning toolholders that accept this designation, allowing fast index changes and minimal setup time. The ISO-style designation is straightforward to match with existing toolholders and clamping systems, so adopting the insert typically requires no special tooling investment. The specification is aligned with ISO material group P for steel, making selection and process planning simpler for production engineers. Contact Metav Werkzeuge today to discuss how Walter Tools Tiger·tec Gold inserts can improve machining stability and to request availability or technical data at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: DCMT11T308-RP4-WPP30G-WALTER Designation: DCMT11T308-RP4 WPP30G Product type: Indexable turning insert Series: Tiger-tec Gold Grade: WPP30G Manufacturer: Walter Tools Core measurements Insert size: 11 Geometry angle: 55° Corner radius: 0.8 mm Clearance angle: 7° Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Chipbreaker: RP4 Material application: Steel (ISO group P) Shape: Rhombus 55° Execution: T FAQ What materials is this insert suitable for? The answer is steel; the DCMT11T308-RP4 WPP30G by Walter Tools is specified for machining materials in ISO group P (steel). How does the Tiger·tec Gold coating benefit production runs? The Tiger·tec Gold coating increases thermal and oxidation resistance on the DCMT11T308-RP4 WPP30G insert, resulting in longer, more predictable tool life and fewer interruptions during production. Which chipbreaker does the insert use and what is its effect? This insert features the RP4 chipbreaker, which promotes controlled chip formation when turning steel, improving evacuation and surface integrity. Is the insert compatible with standard toolholders for DCMT inserts? Yes, the DCMT11T308-RP4 designation matches standard indexable turning toolholders designed for this ISO-style insert size and thickness. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; www.walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com