6.35mm Angle Connector 1/4 Inch Pack Of 2 - LOC-LINE
Benefit from the compact, modular design and 6.35 mm (1/4 in) compatibility to simplify coolant and air routing in workshop machines; the pack format with two pieces ensures quick replacement and keeps production moving. Order the component directly via Metav Werkzeuge or consult our specialists for application guidance. Loc-Line Elbow Connector 6.35 mm (1/4 in) — 90° joint, pack of 2 A Loc-Line Elbow Connector 6.35 mm (1/4 in) engineered to join modular hose segments at a right angle for machine-tool and workshop routing applications. Loc-Line 6.35 mm (1/4 in) system compatible 90° elbow for tight-space routing Supplied in a bag with 2 pieces Single-item accessory for modular assemblies Faster reconfiguration for modular coolant and air setups The elbow is tailored for 6.35 mm (1/4 in) Loc‑Line systems, offering a straightforward way to redirect lines without reworking pipework. By integrating a compact 90° elbow, routing can be adapted quickly to altered tool positions or new fixtures, reducing setup time and the risk of interference during machining. For operations where rapid changeovers and precise targeting of coolant or compressed air are required, this connector supports flexible system layouts and helps maintain efficient throughput. Workshop-ready packaging that reduces downtime Delivered as a bag with 2 pieces, the item is ideal for keeping at a workstation or tool crib as a ready replacement. Small-format spare parts reduce procurement friction and help maintain continuous operation in production environments. The compact pack format also simplifies inventory management for maintenance teams and ensures that common failure points can be serviced quickly, translating to fewer interruptions and a steadier production flow. Stable jointing for tight spaces and precise targeting As a dedicated elbow connector, the component enables a defined change of direction while maintaining the alignment of modular hose assemblies. The right-angle geometry assists in reaching confined or obstructed tool zones and supports precise direction of coolant or air to the cutting zone. When combined with standard Loc‑Line segments, the connector contributes to a reliable routing solution that minimises hose stress and supports repeatable, accurate delivery where it matters most. For advice on compatibility with existing setups or to place an order via Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 — expert guidance is available to match the right components to the application Technical Data Article number: 4000879855NW Manufacturer: LOC-LINE Product type: Elbow connector Label: Winkelverbindung 1/4 ” Btl. m. 2 St. Loc-Line Pack contents: Bag with 2 pieces System compatibility: 6.35 mm (1/4 in) Loc‑Line Facts Nominal diameter: 6.35 mm (1/4 in) Pack quantity: 2 pieces Packaging unit: 1 Special features Right-angle (90°) connection Accessory for modular hose systems Single and supplementary parts for 6.35 mm systems Suitable for coolant and air routing applications FAQ What size system does the elbow connector fit? The elbow connector is designed for the 6.35 mm (1/4 in) Loc‑Line system and matches other Loc‑Line segments intended for that nominal diameter. How is the product supplied? The item is supplied in a bag with 2 pieces, allowing immediate replacement or spare-part stocking. Can this elbow be used for coolant lines on machine tools? Yes, the elbow connector is intended as an accessory within modular hose assemblies for directing coolant or compressed air in machine-tool and workshop setups. What is the article number for ordering? The SKU for this elbow connector is 4000879855NW; refer to this number when enquiring or ordering via Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.35mm Check Valve, Pack of 2 - LOC-LINE
Take advantage of the compact 6.35 mm format and pack supply to secure straightforward backflow protection in modular hose assemblies; the compact design and supplied pair make replacement and stocking simple. Order the item directly via Metav Werkzeuge or consult the Metav specialists for compatibility advice. LOC-LINE 6.35 mm (1/4 in) non-return valve — check valve for modular hose systems, supplied in pairs LOC-LINE 6.35 mm (1/4 in) non-return valve provides positive one-way flow control for Loc-Line modular connections in workshop and industrial settings. For Loc-Line 6.35 mm (1/4 in) systems Supplied in bag with 2 pieces Prevents reverse flow in modular hose lines Dependable one-way flow control for consistent process uptime The non-return valve is engineered to allow flow in one direction while preventing return flow that could contaminate upstream lines or cause unintended pressure changes. At 6.35 mm (1/4 in) nominal diameter, this check valve matches common modular hose sizes found in coolant, lubrication and extraction assemblies. The simple mechanical function—springless or spring-assisted seating depending on design—ensures immediate closure when forward flow stops, reducing the risk of backflow without requiring additional control hardware. This reliability supports continuous operation and reduces unplanned maintenance, translating into measurable efficiency gains for small-batch production and maintenance shops. Low-effort installation and sensible stocking for workshop logistics Delivered as a bag with 2 pieces, the components support fast replacement cycles and straightforward inventory management. The compact format facilitates storage in small parts bins and assembles directly into existing Loc-Line connections without special adapters when the 6.35 mm size is used. For procurement and stores teams, the small packaging unit and clear designation make reorder planning easier and minimise downtime when spares are needed. Metav’s role as a dependable supplier provides a consistent supply channel, backed by a quality filter that helps protect workshop processes from substandard parts. Practical selection criteria for maintenance and integration When choosing a valve for modular hose systems, the decisive factors are size conformity and seamless fit with the intended Loc-Line components. The LOC-LINE 6.35 mm non-return valve meets that requirement and is intended as an accessory part for 6.35 mm modular assemblies. Consider keeping pairs on hand for routine service intervals: the packaged pair simplifies swap-out during scheduled maintenance. For clarification on fit or to confirm compatibility with a specific modular nozzle or hose run, Metav Werkzeuge’s product information and technical advisors can provide targeted guidance and ensure the correct spare is selected for the task. For specification support or to secure stock of the LOC-LINE 6.35 mm non-return valve, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000879854NW Designation: Loc-Line 6.35 mm (1/4 in) non-return valve Product type: Non-return valve Brand: LOC-LINE Facts Size: 6.35 mm (1/4 in) Contents per pack: 2 pieces Packaging unit: 1 SKU: 4000879854NW Special features Single and accessory parts for 6.35 mm systems Supplied in bag with 2 pieces Designed for integration with Loc-Line modular components FAQ What size does the valve fit? The Loc-Line 6.35 mm (1/4 in) non-return valve is designed for 6.35 mm internal connections, matching standard 1/4 in Loc-Line modular hose elements. How is the product supplied? The product is supplied as a bag with 2 pieces and a packaging unit of 1, enabling immediate replacement of small assemblies. Can this valve be used as a spare part for existing Loc-Line systems? Yes, the valve is intended as an accessory for 6.35 mm Loc-Line systems and is suitable for stocking as a replacement component. Is there guidance available on compatibility and installation? Technical advice and compatibility clarification are available from Metav Werkzeuge; reference the article number 4000879854NW when enquiring. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.35mm Loc-Line Assembly Pliers With 1/4in Fitting - LOC-LINE
Take advantage of the reliable fit with the 6.35 mm (1/4 inch) Loc-Line system and the straightforward assembly workflow; the compact tool combines compatibility and practical handling for efficient installation of individual and supplementary Loc-Line components — order directly via Metav Werkzeuge or consult our specialists for application advice. Assembly Pliers Gr. 1/4" Loc-Line — LOC-LINE, 6.35 mm compatibility A compact assembly pliers designed for installing and securing Loc-Line 6.35 mm (1/4 inch) components in modular coolant and vacuum channel systems, suitable for workshop and industrial assembly tasks. Compatible with 6.35 mm Loc-Line parts Compact design for restricted assembly spaces Robust handling for repeated installation cycles Single-piece packaging for immediate use Precision fit for modular Loc-Line systems The tool is engineered to secure 6.35 mm (1/4 inch) Loc-Line segments and fittings with consistent alignment, reducing rework during installation. Thanks to its targeted design, the pliers support exact engagement of male and female connectors in modular hose assemblies, which simplifies assembly steps and shortens set-up time. This results in a reliable mechanical connection that maintains the intended flow direction and positional accuracy within machine enclosures and jigs. Streamlined assembly and labour efficiency By focusing on compatibility with the Loc-Line modular system, the pliers enable quicker insertion and seating of individual and supplementary parts, improving throughput on repetitive tasks. The ergonomic form allows controlled force application, which reduces operator fatigue during batch installations and maintenance operations. For workshops integrating modular coolant or extraction lines, this tool contributes to a smoother workflow and fewer alignment corrections during commissioning. Clear specification and practical use cases Intended for use with Loc-Line 6.35 mm components, the pliers are suitable for assembly, replacement and on-site adjustments of modular tubing runs in machine tools, fixtures and benchtop extraction systems. The tool supports technicians in industries that demand tidy routing of hoses and accurate positioning of nozzles. For procurement and inventory purposes, refer to the SKU and product label to ensure the correct 6.35 mm variant is selected for existing system layouts. Choose genuine LOC-LINE assembly pliers via Metav Werkzeuge for assured compatibility with the 6.35 mm Loc-Line system — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for bespoke advice and fast delivery from Emmerich. Technical data Article number: 4000879857NW SKU: 4000879857NW Product type: Assembly pliers Brand: LOC-LINE Label: Montagezange Gr. 1/4" Loc-Line Packaging unit: 1 Numbers / Core data Nominal diameter: 6.35 mm (1/4 inch) Special features Compatible with Loc-Line modular system 6.35 mm For individual and supplementary parts 6.35 mm (1/4 inch) Designed for assembly and replacement tasks FAQ What components is this tool compatible with? The assembly pliers are compatible with Loc-Line 6.35 mm (1/4 inch) modular components and are intended for inserting and seating individual and supplementary parts as indicated by SKU 4000879857NW. Can this pliers be used in tight installation spaces? Yes, the compact design of the LOC-LINE assembly pliers allows use in restricted areas where modular coolant or extraction tubing must be routed and adjusted. Is the tool suitable for replacement tasks as well as initial assembly? The pliers support both initial installation and replacement of existing 6.35 mm Loc-Line elements, enabling controlled removal and reseating without damaging neighbouring segments. How is the product supplied for inventory management? The item is supplied as a single unit (packaging unit: 1) under SKU 4000879857NW and the label "Montagezange Gr. 1/4" Loc-Line". Are there recommended use cases for this pliers? Typical applications include assembly and maintenance of machine tool coolant nozzles, benchtop extraction lines and fixtures that use Loc-Line 6.35 mm modular tubing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.35mm Loc-Line Coolant Hose Set 29-Piece Flexible Nozzles, NPT Fittings - LOC-LINE
Take advantage of a modular 6.35 mm (1/4") coolant routing system that bundles essential nozzles, valves and fittings for immediate use; the included shut-off and check valves allow precise flow control and reduce setup tweaks. Order the set directly via Metav Werkzeuge or consult our specialists for application advice. LOC-LINE Coolant Hose Set 6.35 mm (1/4") — 29-piece modular coolant delivery kit LOC-LINE 6.35 mm (1/4") modular coolant joint hose set for directed coolant or air flow in machine tools and workshop fixtures Modular 6.35 mm (1/4") hose segments Variety of nozzles for precise flow control Integral shut-off and check valves Complete mounting tools included Deliver coolant where it matters — efficient, measurable flow control for machining This modular system provides a reliable method of delivering coolant and compressed air directly to the cutting zone. The set is built around 6.35 mm (1/4") hose segments that permit targeted routing, while the assortment of nozzles with defined diameters (1.5 mm, 3 mm, 6 mm and wider fan options) enables consistent fluid delivery. For machining operations this translates into improved chip evacuation and more predictable tool wear, so machining cycles run with better repeatability and less manual adjustment. Reduce machine downtime with fast assembly and flexible configuration The kit is designed for rapid installation: segmented hoses connect quickly to NPT-threaded fittings and can be reconfigured without specialised tools. Included items such as a clamp ring with screw, Y-branch and two sizes of NPT adapters (3.18 mm / 1/8" and 6.35 mm / 1/4") make it straightforward to adapt one setup to several applications. The supplied assembly pliers speed up assembly and disassembly, helping workshops shorten changeover times and maintain production flow. Precision components that support consistent process results Integral control elements — a shut-off valve with a swivel joint and a check valve — permit on-the-spot flow regulation and backflow prevention. The mixture of round, flat and multi-orifice nozzles ensures that coolant can be applied as a narrow jet, a broad fan or multiple fine streams, matching cutting strategies from high-speed finishing to heavy-duty roughing. Clear labelling of fittings and standardised NPT threads simplify integration with existing coolant lines and machine interfaces. Built for workshop life: adaptability and low maintenance All components are intended for routine workshop use and offer straightforward replacement should the configuration change. The modular nature reduces the need for bespoke pipework, and individual segments are lightweight to position yet sturdy enough to hold alignment under typical machining conditions. The kit is a practical solution for maintenance teams and production engineers seeking a versatile, serviceable coolant routing option. For reliable, modular coolant routing choose the LOC-LINE coolant joint hose set — contact Metav Werkzeuge for procurement and tailored advice from our Emmerich team at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: 4000879841NW Manufacturer: LOC-LINE Product type: Coolant joint hose set Content: 29 pieces Facts Diameter: 6.35 mm (1/4") Thread adapters: NPT R 3.18 mm (1/8") and NPT R 6.35 mm (1/4") Nozzle diameters: 1.5 mm, 3 mm, 6 mm, 25 mm wide, flat 12×1 mm, flat 12×1.5 mm Multi-orifice nozzles: 5-hole 1.5 mm, 7-hole 1 mm Qty of hose segments: 8 × 90 mm Special features Modular segmented hoses Round, flat and fan nozzles Clamp ring with screw Y-branch and swivel fittings Shut-off valve with swivel joint Check valve included Assembly pliers included FAQ What contents are included in the 29-piece kit? The kit contains 8 segmented hoses (90 mm), a range of nozzles (round, flat and multi-orifice), a clamp ring with screw, a Y-branch, two NPT thread adapters (1/8" and 1/4"), a shut-off valve, a check valve and assembly pliers; the full parts list matches SKU 4000879841NW. Can the system be adapted to existing coolant lines with standard threads? Yes. The set includes NPT adapters (3.18 mm / 1/8" and 6.35 mm / 1/4") to interface with common machine fittings, allowing straightforward integration of the LOC-LINE coolant delivery system. How is flow controlled on the assembly? Flow regulation is achieved with the included shut-off valve featuring a swivel joint for positioning; the check valve prevents backflow, maintaining stable delivery during intermittent cycles. Is the set suitable for both coolant and compressed air? The components are suitable for directing fluids and air; nozzle geometry controls spray pattern and droplet size, so the system can be used for coolant application or directed air jets in machine tool processes. Are replacement parts available for the modular segments and nozzles? Individual segments and nozzle types are standard within the LOC-LINE modular range and can be replaced as needed to adapt the setup or refresh worn components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.35mm Loc-Line Coolant Hose Set 8-Piece, Interchangeable Nozzles NPT Adaptors - LOC-LINE
Take advantage of the flexible segmented hoses and the assorted nozzle options to achieve targeted coolant delivery and better chip evacuation; order the Loc‑Line components directly via Metav Werkzeuge or ask their consultants for application advice. Loc‑Line Coolant Hose Set — 6.35 mm (1/4 in) modular coolant delivery with assorted nozzles Loc‑Line Coolant Hose Set for precise coolant routing in machining and workshop applications, designed as a modular coolant articulated hose solution Flexible segmented hoses for precise coolant direction Assorted nozzles Ø 1.5 / 3 / 6 mm and 25 mm wide fan NPT thread adapters 1/8" and 1/4" for machine ports Modular system for fast repositioning and retrofitting Precise coolant delivery that extends tool life The modular articulated hoses provide targeted cooling directly at the cutting zone, reducing heat build-up and improving lubrication where it matters most. The segmented design allows for repeatable positioning and quick repositioning without the need for tools, saving set-up time between operations. By directing the coolant stream, heat is removed more efficiently and chip flow is improved, which can contribute to longer tool life and fewer re‑works. The construction supports both spot cooling and small‑area flood, giving process engineers control over cooling strategy. Variable nozzle selection for process optimisation This system includes a range of assorted nozzles to adapt flow characteristics to the task: fine jets for precision cooling and a wide‑angle nozzle for broader coverage. The available diameters (1.5 mm, 3 mm, 6 mm) and the 25 mm wide fan let operators control coolant volume and spray pattern, aiding chip evacuation and surface finish. Smaller orifices concentrate flow for delicate cuts; the wide nozzle distributes coolant to a larger area for general cooling and lubrication. Understanding nozzle behaviour helps to reduce coolant consumption while maintaining machining performance. Fast installation and compatibility with standard ports The set is supplied with NPT adapters for both 1/8" and 1/4" connections, enabling straightforward attachment to common machine coolant outlets. Two articulated hoses of 140 mm length are included for flexible reach near the tool holder, and the modular nature means components can be reconfigured or extended as needed. The simple push‑fit joints require no special tools, so maintenance and reconfiguration are rapid. For shops prioritising uptime, the modular approach minimises downtime during tool changes or process adjustments. A practical choice for workshops and production cells Workshops and production cells benefit from a robust, repeatable coolant routing system that is easy to service and adapt. The Loc‑Line modular arrangement permits replacement of individual segments or nozzles without discarding the whole assembly, supporting a cost‑efficient maintenance cycle. The clear function of each component simplifies training for operators and ensures that the system integrates smoothly into existing coolant circuits. For flexible machining setups and small series production, the combination of adaptability and precision makes this articulated hose solution a practical addition to the tooling inventory. For targeted coolant control and expert advice on the Loc‑Line coolant hose set, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications Technical Data Article number: 4000879840NW Item name: Coolant articulated hose set, 1/4 in, Loc‑Line Type: Loc‑Line 6.35 mm (1/4 in) Product type: Coolant articulated hose set Manufacturer: LOC‑LINE Contents: 8 parts Facts Hose diameter: 6.35 mm (1/4 in) Hose length: 140 mm (2 pieces) Nozzle diameters: 1.5 mm, 3 mm, 6 mm Wide nozzle width: 25 mm Thread adapters: NPT 3.18 mm (1/8") and NPT 6.35 mm (1/4") Special features Set and basic equipment for common applications Modular articulated hose system Includes two joint hoses, three round nozzles, one wide‑jet nozzle Includes NPT nipples for 1/8" and 1/4" connections FAQ What nozzle sizes are included in the set? The set contains round nozzles in 1.5 mm, 3 mm and 6 mm diameters plus a 25 mm wide fan nozzle for broader coolant coverage. Can the hoses be connected to standard machine ports? Yes, the set includes NPT adapters for both 1/8" and 1/4" ports to fit common coolant outlets on machining equipment. Are the articulated hoses easy to reposition during setup? The segmented, modular construction allows quick repositioning without tools, so adjustments at the machine are fast and repeatable. Is this system suitable for both precision and general cooling tasks? The combination of fine jet nozzles and a wide‑angle nozzle makes the system suitable for targeted precision cooling as well as broader lubrication and chip‑control tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.35mm Loc-Line Threaded Nipple NPT R 1/8, Pack of 4 - LOC-LINE
Take advantage of a compact, purpose-made accessory that matches the Loc-Line 6.35 mm (1/4 in) modular system and comes in a practical bag of four; the simple supply format reduces downtime and supports efficient inventory management. Order the part directly via Metav Werkzeuge or request precise application advice from the Metav consultants. Loc-Line 6.35 mm (1/4 in) Thread Nipple — Bag of 4 (LOC-LINE) The Loc-Line 6.35 mm (1/4 in) Thread Nipple is a small-format threaded fitting designed for use with 6.35 mm modular hose components, providing a neat connection for modular routing systems. Loc-Line compatible 6.35 mm (1/4 in) Pack of 4 in sealed bag Compact, easy-fit thread nipple Single and supplement parts for modular lines Precision fit for modular hose assemblies that keeps lines neat The accessory is engineered as a thread nipple for 6.35 mm modular tubing, offering a compact interface that integrates with established modular systems. Thanks to the consistent nominal diameter of 6.35 mm (1/4 in), the part allows straightforward assembly and replacement, which helps to minimise machine downtime and simplifies maintenance routines. The design focus is on reliable seating and repeatable connections rather than decorative finish, so the practical benefit is a predictable fit in modular routing setups. Practical pack format for quick replenishment and stock control Delivered as a bag with 4 pieces and a packaging unit of one, the product supports logical stock keeping and easy on-the-bench replacement. Keeping small consumables organised in standard multiple packs reduces procurement frequency and administrative overhead; the supplied set is suitable both as spare parts and for completing assembly runs. The entry also appears in the range of single and supplementary components for 6.35 mm lines, which streamlines the selection of matching parts when expanding or servicing a modular distribution system. Check the exact connection standard before installation for full compatibility The available data defines the item as a threaded connection for modular lines, but the thread designation in the source is ambiguous; therefore, it is advisable to confirm the required thread standard for the intended application before final assembly. Verifying the connection standard prevents misfits and potential rework, preserving tool time and cutting avoidable costs. For specific machine interfaces or bespoke routing requirements, technical clarification will ensure the right mating parts are used. For reliable matching of LOC-LINE accessories and tailored procurement from Emmerich, contact Metav Werkzeuge for expert advice and swift supply — Metav Werkzeuge can confirm compatibility and arrange prompt delivery from their central stock. Technical data Article number: 4000879848NW Type: Loc-Line 6.35 mm (1/4 in) Product type: Thread nipple Brand: LOC-LINE Pack contents: Bag with 4 Packaging unit: 1 Facts Nominal diameter: 6.35 mm (1/4 in) Pack size: 4 pieces Packaging unit: 1 Special features / Versions Single and supplementary parts for 6.35 mm modular lines Supplied in sealed bag Intended as a threaded connecting component FAQ What is included in the pack? The pack contains four thread nipples supplied in a single sealed bag; the item is listed under SKU 4000879848NW and described as thread nipples for 6.35 mm modular lines. Which system is this part intended for? The part is specified for use with the Loc-Line 6.35 mm (1/4 in) modular hose system and appears among single and supplementary components for that diameter. What thread standard does the part use? The source data contains a mixed thread designation that is inconsistent; confirmation of the exact connection standard is recommended prior to installation. Can these parts be used as replacement components? Yes, they are presented as single and supplementary parts for the 6.35 mm modular range and are suitable for replenishing or completing assemblies with matching components. How is the product packaged for delivery? The product is delivered as a bag with four pieces and a packaging unit of one. Manufacturer: LOC-LINE; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.35mm Shut-Off Valve With Internal Thread, Pack Of 2 - LOC-LINE
Take advantage of compatibility with 6.35 mm (1/4 in) Loc-Line systems, the internal female thread for a secure fit and the convenience of a pack of two for immediate spare use; order directly via Metav Werkzeuge or consult our specialists for technical matching. Loc-Line shut-off valve 6.35 mm (1/4 in) with internal thread The Loc-Line shut-off valve 6.35 mm (1/4 in) is a compact control element designed for modular coolant and air distribution systems in workshops and light industrial environments. For 6.35 mm (1/4 in) modular systems Internal female thread for secure fit Pack of 2 components per bag Spare and accessory part for coolant lines Precise flow control for modular workstations The valve delivers reliable on/off control within 6.35 mm (1/4 in) Loc-Line assemblies, enabling straightforward isolation of individual feed lines. Thanks to the internal thread, the component creates a secure connection to standard Loc-Line fittings, reducing the risk of leaks and simplifying leak tracing. As a spare or accessory part, this shut-off device supports continuity in production and aids efficient maintenance planning by allowing targeted isolation without system-wide shutdowns. Quick integration and reduced downtime Installation is immediate: the element threads into the modular tubing network and functions as a compact control point. The geometry and connection type ensure minimal flow restriction when open and positive shut-off when closed, which contributes to repeatable process conditions. For production environments that value uptime, the valve’s role as a replaceable module means fast swap-outs and predictable behaviour, supporting consistent coolant or compressed-air delivery across fixtures and rigs. Practical choice for workshops and service kits As a bagged pair, the component suits both refurbishment and routine spare-part stocking. Workshops and service technicians benefit from the pack of 2 format for same-day repairs or to equip maintenance kits. The valve is especially useful where modular flexibility is required: machining islands, fixture cooling lines, and retrofit coolant routing all gain from compact, maintainable shut-off elements that avoid complex rework. For procurement or technical advice on the Loc-Line shut-off valve 6.35 mm (1/4 in), contact Metav Werkzeuge GmbH for product matching and delivery from our Emmerich site – eMail info@metav-werkzeuge.com or call +49 2822 7131930 for specialist support. Technical Data Article number: 4000879853NW Product type: Shut-off valve Brand: LOC-LINE Packaging: Bag with 2 Specifications Size: 6.35 mm (1/4 in) Quantity per pack: 2 Packaging unit: 1 Features Internal thread (female) For modular 6.35 mm Loc-Line systems Single and accessory part Bagged spare components FAQ What is the connection size of this valve? The Loc-Line shut-off valve 6.35 mm (1/4 in) has a connection size of 6.35 mm (1/4 in) and is supplied as article 4000879853NW. Can this component be used in coolant and compressed-air lines? Yes, the shut-off valve from LOC-LINE is intended as an accessory part for modular coolant and air distribution systems and functions as a reliable isolation point. How many pieces are included in one package? One bag contains a pack of 2 components; the product is supplied as two valves per bag (article 4000879853NW). Is the valve compatible with other Loc-Line fittings? The valve is designed for compatibility with the 6.35 mm (1/4 in) Loc-Line modular system, providing a secure female-threaded connection to standard fittings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.35mm Shut-Off Valve With Male Thread, Pack Of 2 - LOC-LINE
Take advantage of precise flow control and straightforward integration in modular hose assemblies by choosing a genuine Loc-Line accessory that combines accurate shut-off capability with a standard 6.35 mm (1/4 inch) connection; order directly via Metav Werkzeuge or consult the advisors for specification support. LOC-LINE shut-off valve 6.35 mm (1/4 inch) – with external male thread LOC-LINE shut-off valve for modular hose systems, designed to isolate or regulate flow in 6.35 mm (1/4 inch) Loc-Line assemblies and compatible accessory configurations. For 6.35 mm (1/4 inch) modular hose systems External male thread for secure connection Replacement and accessory part for Loc-Line systems Precise flow control where it matters most The LOC-LINE shut-off valve provides reliable flow control for modular hose assemblies with a defined 6.35 mm (1/4 inch) diameter. As an accessory part it enables quick interruption of media flow without altering the existing system layout. The male thread interface ensures a consistent mechanical fit with compatible fittings, reducing the risk of leaks and unnecessary downtime. In production and maintenance contexts this component supports repeatable shutdowns and simple line isolation. Easy installation and seamless integration Fitted to standard Loc-Line segments, this valve is conceived as a straight-forward replacement or supplementary component for existing modular hose installations. The male thread connection allows for a direct screw-in assembly to matching female fittings, enabling rapid service or reconfiguration. The valve’s role as an accessory part means inventory handling and part selection are simplified, allowing workshops and service departments to standardise repair kits and minimise engineering interruptions. Practical benefits for workshop and maintenance operations As an accessory item for modular fluid guidance, the valve contributes to a tidy, controllable system layout and facilitates maintenance procedures. The compatibility with 6.35 mm (1/4 inch) systems makes it appropriate for a wide range of modular setups, while the concise design supports compact routing in confined spaces. Selecting a standard Loc-Line component helps maintain system homogeneity and supports predictable performance across routine operations. For reliable modular-hose maintenance and genuine Loc-Line accessories, contact Metav Werkzeuge for procurement and technical advice by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — Metav’s specialists will assist with selection and delivery. Technical Data Article number: 4000879852NW Manufacturer: LOC-LINE Product type: Shut-off valve Execution: with external male thread Packaging unit: 1 Facts Size: 6.35 mm (1/4 inch) SKU: 4000879852NW Special features Compatible with 6.35 mm Loc-Line modular hose systems Replacement and accessory part Content: Bag with 2 pieces FAQ What size connection does the valve use? The valve fits 6.35 mm (1/4 inch) modular hose systems and is specified for standard Loc-Line assemblies (SKU 4000879852NW). Which thread type is supplied with the component? This accessory features an external male thread, designed to screw into matching female fittings within Loc-Line modular hose configurations. Is this part intended as a replacement or an upgrade? The item is supplied as a replacement and supplementary accessory part for Loc-Line systems and is suitable for maintaining or extending modular hose layouts. How is the valve supplied and packaged? The product is delivered in a bag containing two pieces as stated in the technical details for straightforward stock management. Can the valve be used with existing Loc-Line segments without modification? Yes; the valve is designed for direct integration with standard 6.35 mm (1/4 inch) Loc-Line components to allow quick assembly and minimal system downtime. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.35mm Shut-Off Valve With Swivel Joint, Pack Of 2 - LOC-LINE
Reliable inline flow control and modular compatibility ensure precise coolant routing in machining applications; the compact 6.35 mm shut-off option with a swivel joint reduces setup time and keeps production moving. Order directly via Metav Werkzeuge or consult our specialists for application advice. LOC-LINE shut-off valve 6.35 mm (1/4 inch) with swivel joint — pack of 2 The LOC-LINE shut-off valve provides simple inline flow control for 6.35 mm (1/4 inch) modular tubing, suitable for coolant, air and light fluid routing in machining and workshop environments Fits 6.35 mm (1/4 inch) Loc-Line tubing Swivel joint for flexible adjustment Pack of 2 for immediate replacement Simple inline flow shut-off function Precise flow control for machining and coolant systems The inline shut-off valve delivers a clear functional advantage: defined on/off control of coolant or air within a modular tubing run. Compatible with 6.35 mm (1/4 inch) Loc-Line systems, the valve enables targeted interruption of flow without disassembling the line, which reduces machine downtime and fluid waste. The compact design suits confined tool stations and enables quick adaptation of existing coolant circuits. For operators and maintenance teams, the main benefit is predictable control and reduced need for temporary clamps or improvised seals. Flexible swivel joint for exact nozzle positioning A swivel joint connection allows the outlet to be angled precisely while maintaining the shut-off function, making the valve particularly useful on multi-axis machines and close-tolerance jigs. The articulated connection reduces mechanical strain on the tubing, prolonging service life of the modular nozzles and maintaining sealing integrity under vibration. This flexibility translates into fewer alignment iterations during setup and more consistent cooling or lubrication of the cutting zone, directly supporting process reliability and surface finish quality. Workshop-ready spares to maintain production continuity Supplied as a pack of 2 in a resealable bag, these spare shut-off valves are intended for rapid replacement and routine stocking at the bench. The small form factor and straightforward inline fitment make them an efficient preventive-maintenance item: a quick swap restores controlled flow and avoids longer machine stops. With compatibility across standard Loc-Line tubing sizes, the valves are suitable for retrofitting existing modular lines or integrating into new assemblies, providing an inexpensive way to enhance operational uptime and process control. For reliable coolant management and straightforward spare provisioning, contact Metav Werkzeuge for supply from Emmerich and tailored advice on system integration via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 4000879851NW Type designation: Loc-Line 6.35 mm (1/4 inch) Product: Shut-off valve Contents: Bag with 2 pieces Execution: with swivel joint Manufacturer: LOC-LINE Facts Size: 6.35 mm (1/4 inch) Pack quantity: 2 pieces Packaging unit: 1 Special features Swivel joint connection Compatible with Loc-Line modular tubing Inline flow shut-off function Bag packaging FAQ What tubing does this valve fit? The LOC-LINE shut-off valve is designed for 6.35 mm (1/4 inch) Loc-Line modular tubing and mates directly with standard connectors used in those systems. Can the valve be adjusted once installed? Yes, the integrated swivel joint allows angular adjustment of the outlet while maintaining the shut-off function for precise nozzle alignment. How many valves are included in one package? Delivery is a bag with 2 pieces, allowing immediate replacement or stocking of a spare for maintenance routines. Is this shut-off valve suitable for coolant and compressed air? The valve is intended for routing coolant, air and similar light fluids within modular tubing systems; compatibility with specific fluids should be checked against system requirements and operating conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.35mm Y-Branch 1/4" Pack of 2 - LOC-LINE
Take advantage of the combination of system compatibility with the 6.35 mm (1/4 in) Loc‑Line standard and simple modular routing to streamline workshop setups; the pack includes two Y‑branch connectors for flexible layout adaptation. Order the parts directly via Metav Werkzeuge or consult the team for integration guidance. Loc‑Line Y‑Branch (6.35 mm / 1/4 in) — Pack of 2 Loc‑Line Y‑Branch for modular segmented hose systems, designed to split and re‑route lines in compact configurations for workshop applications Compatible with 6.35 mm (1/4 in) Loc‑Line system Modular connection for flexible routing Pack contains two Y‑branch connectors Compact design for tight installations Faster set‑ups through modular routing and exact fit The segmented connector enables modular reconfiguration of existing hose lines without the need for bespoke adapters. As a Y‑branch connector for the 6.35 mm standard, it supports tidy distribution of flow paths within a compact footprint, reducing the need for complex pipe runs. This results in fewer interruptions during equipment changes and a clearer layout that helps maintain precision in auxiliary lines. For workshops that rely on adaptable fixtures, the component acts as a dependable supplement to standard systems. Practical benefits for workshop efficiency and inventory consolidation By matching the established 6.35 mm interface, the Y‑branch reduces the variety of spare parts required and simplifies stock management. The element is classified as an individual and supplementary part for the 6.35 mm range, so procurement teams can standardise on a single modular family and cut lead times for replacements. The straightforward nature of the connector supports quick integration, helping to lower downtime and sustain continuous operation on the shop floor while retaining a clear inventory structure. Compatibility details and intended applications explained Designed as an accessory for segmented hose systems, the Y‑branch connector fits into existing modular assemblies to split a single line into two branches or to combine two inputs into one run where appropriate. Installation is compatible with the Loc‑Line 6.35 mm series and follows the same interface logic as other expansion parts. The two units supplied per bag make it simple to equip multiple stations or to keep one as a ready spare. For retrofit or new installations, the connector provides a compact, system‑conformant way to adapt routing without reworking the primary infrastructure. Order Loc‑Line components via Metav Werkzeuge for reliable supply and expert advice on system integration — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options Technical Data Article number: 4000879850NW SKU: 4000879850NW Product type: Y‑branch Facts Diameter: 6.35 mm (1/4 in) Pack content: bag with 2 pieces Pack unit: 1 Special features Compatible with 6.35 mm (1/4 in) Loc‑Line system Classified as single and supplementary parts for 6.35 mm range Compact Y‑branch design for modular hose assemblies FAQ What system is this Y‑branch compatible with? The Y‑branch is compatible with the 6.35 mm (1/4 in) Loc‑Line system and is intended for use as a modular connector within that range. What is included in the delivery of the Loc‑Line Y‑Branch (SKU 4000879850NW)? Delivery includes a bag containing two Y‑branch connectors, supplied as accessory parts for the 6.35 mm modular series. Can the Y‑branch be used to split or combine lines? Yes, the Y‑branch connector is designed to split a single 6.35 mm line into two branches or to combine two runs where system layout permits. Is the component suitable as a spare part for workshop stock? The Y‑branch (Loc‑Line Y‑Branch, SKU 4000879850NW) is suitable as a supplementary spare due to its standard interface and modular classification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63mm Wide Spray Nozzle 1/2 Inch Loc-Line, Pack of 2 - LOC-LINE
Take advantage of a reliable combination of wide-area coolant distribution and simple integration: the robust Loc-Line design with a 12.7 mm (1/2 inch) connection and a 63 mm spray width ensures consistent coverage for machining, while the packaged pair provides quick replacement or spares on the workbench. Order directly via Metav Werkzeuge or consult our specialists for compatibility and delivery. Loc-Line Wide Jet Nozzle 12.7 mm (1/2 inch) — 63 mm spray width The Loc-Line Wide Jet Nozzle is a modular coolant and air nozzle designed for broad, even fluid distribution in workshop and light industrial setups. 12.7 mm (1/2") connection compatibility 63 mm wide jet for broad coolant coverage Compatible with Loc-Line modular system Supplied in sealed bag with two nozzles Stable, wide-area fluid delivery for consistent machining results The wide jet design provides a 63 mm spray width, creating an even distribution of coolant or air across a workpiece. This reduces the need for frequent repositioning of nozzles and helps maintain process stability during operations where uniform coverage is critical. The broad jet also lowers localised temperature peaks by spreading coolant over a larger area, which can improve tool life and surface finish. In practical terms, the component’s geometry converts a single supply line into a flatter, wider output without complex adjustments, making it well suited to general workshop applications that require dependable, repeatable fluid coverage. Fast integration with modular systems for flexible workstation layouts Fitting a 12.7 mm (1/2 inch) connection, the nozzle is compatible with standard modular hose systems, enabling quick retrofitting or reconfiguration of coolant lines. The modular interface simplifies alignment and repositioning of the nozzle within existing Loc-Line arrangements, minimising downtime during set-up changes. This flexibility supports a more efficient workflow: one outlet can be redirected or swapped out as the production task changes, offering convenience for varied machining tasks without specialised adaptors or additional components. Compatibility with established modular systems also streamlines spare-part management. Practical handling and serviceability for everyday workshop use Supplied in a sealed bag containing two nozzles, the item facilitates immediate replacement and straightforward inventory control. The simple form factor reduces clogging risk and allows routine cleaning with standard workshop fluids or compressed air. Where quick maintenance is required, components can be removed and reinstalled without specialised tools, promoting uptime. The part’s design focuses on functional reliability rather than unnecessary complexity, helping maintain operational continuity on the shop floor while keeping maintenance tasks both predictable and quick. For confirmation on suitability, availability and lead times of the Loc-Line wide jet nozzle, contact Metav Werkzeuge for tailored advice and ordering at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: 4000879878NW Type: Loc-Line 12,7 mm (1/2 Zoll) Label: Breitstrahldüse Gr.1/2 Zoll B.63mm Btl.m.2 St.LOC-LINE Manufacturer: LOC-LINE Product type: Wide jet nozzle Package unit: 1 Facts Spray width: 63 mm Connection diameter: 12.7 mm (1/2 inch) Contents: Bag with 2 Special features Wide jet nozzle Compatible with Loc-Line modular system Supplied in sealed bag with two nozzles FAQ What connection size does the nozzle use? The Loc-Line wide jet nozzle uses a 12.7 mm (1/2 inch) connection suitable for standard modular coolant hoses. Is the nozzle suitable for directed coolant or compressed air? Yes, the design supports both coolant and air applications where a broad, even jet is required. How wide is the spray pattern from this nozzle? The nozzle produces a 63 mm wide jet, providing broad coverage to reduce repositioning needs during machining. How is the product supplied and what is included? The product is supplied as a bag with two nozzles, allowing immediate replacement or spare stock on the bench. Can the nozzle be integrated into existing Loc-Line systems? The nozzle is compatible with the Loc-Line modular system, enabling straightforward integration and repositioning. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6mm Round Nozzle 1/2" Loc-Line Pack of 4 - LOC-LINE
Take advantage of precise, repeatable coolant and air direction with a compact, modular nozzle that fits 12.7 mm Loc-Line systems. Its 6 mm orifice focuses the flow for cleaner machining results while the snap-fit design reduces setup time and keeps production moving. Order directly via Metav Werkzeuge or consult our team for parts matching and supply. LOC-LINE Round Nozzle 12.7 mm (1/2 in), Ø 6 mm — Round Nozzle The LOC-LINE Round Nozzle, 12.7 mm (1/2 in) connection with a 6 mm bore, provides a compact solution for targeted coolant and compressed-air routing in workshop and machine applications Fits 12.7 mm (1/2 in) Loc‑Line systems 6 mm bore for focused fluid flow Modular snap-fit connection for quick changes Suitable as single or accessory part Precise flow control that improves machining consistency The circular outlet with a 6 mm diameter produces a focused flow that concentrates coolant or compressed air exactly where it is needed, reducing splash and minimising waste. In practice, a targeted stream helps maintain tool temperature and chip evacuation, which supports repeatable part quality and prolongs tool life. For workshops using modular coolant systems, the measurable aperture and standard connection ensure predictable performance across multiple setups. Modular assembly for faster changeovers and less downtime Designed for the 12.7 mm (1/2 in) modular system, the nozzle uses a snap-fit connection that simplifies reconfiguration of coolant lines. The modular approach permits rapid repositioning and replacement without special tools, reducing machine downtime and speeding maintenance tasks. For production environments where fast setup and flexible coolant routing are priorities, this approach translates into measurable time savings and smoother workflow integration. Robust compatibility with standard Loc‑Line layouts As an accessory part for Loc‑Line systems, the nozzle integrates into existing modular assemblies and works alongside elbows, extensions and base segments. Its compatibility with the 12.7 mm standard makes it a convenient spare or upgrade component for machine shops, training workshops and maintenance departments requiring consistent channel dimensions. The simple geometry also eases inspection and visual checks during routine maintenance. Clear identification and straightforward specification The item is supplied as a component intended for quick identification in parts lists and maintenance inventories. Its clear sizing—standard 12.7 mm system connection and 6 mm outlet—removes ambiguity when ordering or replacing parts, helping purchasing and maintenance teams maintain uninterrupted operations. The compact form factor ensures minimal obstruction in tight routing runs while still delivering a concentrated flow. For reliable supply and technical matching of LOC‑LINE nozzles contact Metav Werkzeuge GmbH for fast parts identification and delivery; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and order support Technical Data Article number: 4000879873NW Type: Loc‑Line 12.7 mm (1/2 in) Label: Round nozzle Gr. 1/2 in Ø 6 mm bag with 4 Facts Diameter: 6 mm System connection: 12.7 mm (1/2 in) Contents: Bag with 4 Packaging unit: 1 Special features Product type: Round nozzle Axite enrichment: Single and accessory parts 12.7 mm (1/2 in) Manufacturer name: LOC‑LINE FAQ Is this nozzle compatible with standard Loc‑Line piping? The nozzle is designed for the 12.7 mm (1/2 in) Loc‑Line system and connects to standard segments used in that modular range; refer to SKU 4000879873NW for exact identification. What is the outlet diameter and how does it affect flow? The outlet bore is 6 mm; a smaller, defined aperture creates a more focused coolant or air stream, improving chip removal and tool cooling in many machining operations. Can this nozzle be repositioned without tools? Yes, the design is for snap‑fit integration into the modular system, allowing quick repositioning or replacement without additional tools. Manufacturer: LOC‑LINE; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6mm Round Nozzle Pack of 4, 1/4" (6.35mm) Loc-Line - LOC-LINE
Take advantage of the combination of simple retrofitting, precise 6.35 mm compatibility and the convenience of a four-piece pack for uninterrupted coolant or air routing; order the components directly via Metav Werkzeuge or consult the team for integration advice. Loc-Line Round Nozzle 1/4" (6 mm) — Round nozzle, LOC-LINE The Loc-Line Round Nozzle 1/4" (6 mm) is a compact replacement and accessory outlet for 6.35 mm modular hose systems, designed for targeted coolant or air delivery in machining and workshop environments. Compatible with 6.35 mm (1/4") modular hose Pack of 4 round nozzles Precise, focused coolant or air jet Suitable for accessory and replacement parts Improved process control through precise nozzle flow The round outlet offers a focused jet that supports chip evacuation and local cooling where it matters, which can contribute to longer cutter life and fewer interruptions during production. Connection to the widely used 6.35 mm (1/4") modular system ensures straightforward interchangeability with other modular components. As a replacement or spare part, the nozzle enables quick reconfiguration of coolant or air lines without special tools, reducing setup times and helping maintain steady machining cycles. Fast integration and flexible positioning for workshop use Delivered as a pack of 4, the nozzles are intended as direct accessories and spare parts for modular coolant systems, allowing several tool stations to be stocked or upgraded at once. The compact design permits precise alignment of the outlet, enabling fine adjustment of air or coolant direction. This flexibility supports reproducible setups on lathes, milling machines or bench fixtures and lowers the likelihood of repeated machine stops for nozzle changes. Practical benefits for maintenance and spare part management Standardised dimensions and the 1/4" standard connection simplify inventory management: the same nozzle type can serve as a direct replacement across multiple machines that use the 6.35 mm modular line. For maintenance teams, this means fewer specialised items to source and a more reliable supply chain for small but essential components. The product’s role as an accessory part makes it a pragmatic addition for workshops aiming to preserve tool performance and maintain consistent production quality. For retrofit and spare-part enquiries relating to 6.35 mm modular systems, contact Metav Werkzeuge for tailored advice and availability – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000879845NW Type designation: Loc-Line 6.35 mm (1/4") Product label: Runddüse Gr. 1/4" D.6mm Btl. m. 4 St. Manufacturer brand: LOC-LINE Product type: Round nozzle Contents: Bag with 4 Core measurements Diameter: 6 mm Connection size: 6.35 mm (1/4") Pack quantity: 4 pieces Packaging unit: 1 Features and suitability Accessory and replacement parts for 6.35 mm modular systems Compact round outlet for focused coolant or air flow Bag packaging for small-parts storage Intended for modular hose assemblies and retrofits FAQ What connection does the nozzle require? The nozzle fits a 6.35 mm (1/4") modular system and uses the standard Loc-Line connection dimensions to ensure compatibility with existing assemblies. How many nozzles are included in one package? One bag contains four round nozzles, providing immediate replacement capability or spares for multiple stations. Is this nozzle suitable for coolant and air applications? Yes, the round outlet is designed for targeted coolant or air delivery in machining and workshop settings, supporting chip control and local cooling. Can these nozzles be used as direct replacements on existing Loc-Line lines? The product is intended as an accessory and replacement component for 6.35 mm modular hose systems and is dimensioned for straightforward interchangeability. What is the article number for ordering spare parts? The article number for this item is 4000879845NW; the product is listed under the LOC-LINE brand as a round nozzle for 1/4" systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9mm Round Nozzle 1/2 Inch Loc-Line Pack Of 4 - LOC-LINE
Take advantage of precise nozzle control and straightforward integration with the 12.7 mm (1/2 in) Loc-Line modular system for consistent coolant and air delivery; combine compatibility and easy replacement for uninterrupted operation. Order the Loc-Line Round Nozzle directly via Metav Werkzeuge or ask the consultants for technical advice. Loc-Line Round Nozzle for 12.7 mm (1/2 in) modular system — 9 mm outlet Loc-Line Round Nozzle for targeted coolant or air delivery in machine tooling and workshop setups, designed for use with the 12.7 mm (1/2 in) Loc-Line modular hose system. Fits 12.7 mm (1/2 in) modular system 9 mm precise jet opening Quick snap-fit installation Improve machining stability with a focused 9 mm jet The round outlet delivers a precise 9 mm jet that stabilises the fluid or air stream, reducing misting and improving tool cooling or chip evacuation. This concentrated flow supports steady cutting conditions and helps maintain surface quality by directing coolant or compressed air exactly where it is needed. The component acts as an economical accessory solution, enabling consistent performance without complex setup changes. Fast integration to minimise downtime Designed for the 12.7 mm (1/2 in) Loc-Line modular platform, the nozzle offers a simple snap-fit connection that enables quick retrofitting or replacement when compared with permanently fixed piping. The modular approach speeds maintenance cycles and allows flexible repositioning of the outlet to suit different machines or jobs, which supports continuous production and easier line adaptation. Practical spare-part strategy for workshop reliability As a standard accessory for modular coolant and air routing, the nozzle functions as a reliable spare or complement to existing systems, helping to reduce the risk of halt due to worn or misplaced outlets. The compact design provides targeted delivery while keeping the overall hose assembly unobtrusive on the machine, preserving accessibility and operator safety during routine adjustments. For assured compatibility with Loc-Line systems and ordering via Metav Werkzeuge, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for product allocation and technical clarification Technical data Article number: 4000879874NW SKU: 4000879874NW Product: Round nozzle Product type: Loc-Line 12.7 mm (1/2 in) Label: Runddüse Gr. 1/2 ” D.9mm Btl. m. 4 St. Loc-Line Manufacturer: LOC-LINE Diameter: 9 mm Pack contents: Bag with 4 Pack unit: 1 Axite enrichment: Single and accessory parts 12.7 mm (1/2 in) Facts Diameter: 9 mm System size: 12.7 mm (1/2 in) Pack contents: 4 pieces Article number: 4000879874NW Special features Snap-fit connection for quick installation Accessory/replacement part for modular hose systems Targeted coolant or air delivery Compatible with standard 12.7 mm Loc-Line fittings FAQ What system is the nozzle compatible with? The nozzle is compatible with the 12.7 mm (1/2 in) Loc-Line modular hose system and fits standard Loc-Line fittings for straightforward integration. What is the outlet diameter and why does it matter? The outlet diameter is 9 mm; the 9 mm opening provides a focused jet that improves coolant targeting and chip removal during machining. How is the nozzle installed on a machine setup? Installation uses a snap-fit connection designed for the 12.7 mm (1/2 in) Loc-Line modules, enabling rapid retrofit and repositioning without tools. Is this item intended as a spare or a primary nozzle? This round nozzle serves well as a replacement or accessory to complement existing modular hose assemblies and support a practical spare-part strategy. How many nozzles are included in the retail pack? The supplied bag contains four round nozzles for easy replenishment of fittings on the production floor. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Späneschutzschild 190x250mm Arm-L.350mm LOC-LINE
zum Schutz vor fliegenden Spänen und lästigen Kühlmittelspritzern · Schild aus hochwertigem, 3 mm starkem Polycarbonat, 360° drehbar · mit positionsstabilem Gelenkarm, aus 19,05 mm (3/4 Zoll) breiten Loc-Line Segmenten · mit Magnetfuß Weitere technische Eigenschaften: · Armlänge: 350mm
Späneschutzschild 215x305mm Arm-L.350mm LOC-LINE
zum Schutz vor fliegenden Spänen und lästigen Kühlmittelspritzern · Schild aus hochwertigem, 3 mm starkem Polycarbonat, 360° drehbar · mit positionsstabilem Gelenkarm, aus 19,05 mm (3/4 Zoll) breiten Loc-Line Segmenten · mit Magnetfuß Weitere technische Eigenschaften: · Armlänge: 350mm
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com