0,5-10mm Schnellspannbohrfutter B12 Selbstspannend Rechtslauf, hoher Rundlauf · austauschbare gehärtete Teile - ALBRECHT
Schnellspannbohrfutter SBF Spann-Ø 0,5-10mm B 12 ALBRECHT – Schnellspannbohrfutter Das Schnellspannbohrfutter SBF ist ein robustes Schnellspannbohrfutter für präzise Bohr- und Spannaufgaben in der Industrie und Werkstatt, ausgelegt auf hohe Beanspruchung und maximale Rundlaufgenauigkeit. Selbstspannend mit maximaler Spannkraft Spannbereich 0,5–10 mm Kegelaufnahme B 12 für Standardaufnahmen Austauschbare, gehärtete Verschleißteile Ausgelegt für Rechtslauf Präzision und Aufbau für dauerhaften Einsatz Das Schnellspannbohrfutter kombiniert Rundlaufgenauigkeit mit einer soliden Mechanik, die für industrielle Fertigungsprozesse entwickelt wurde. Durch die Kegelaufnahme B 12 erfolgt die Kraftübertragung direkt und formschlüssig, was die Stabilität beim Bohren erhöht. Anwender profitieren von gleichbleibenden Bohrbildern und reduzierten Ausschussraten, da das Futter die Werkzeuge zentrisch führt und so Vibrationen minimiert. Einsatzbereiche und praktische Vorteile in der Fertigung Mit einem Spannbereich von 0,5–10 mm eignet sich das Bohrfutter für feine Präzisionsbohrungen ebenso wie für allgemeine Bearbeitungsaufgaben in Metall und anderen Werkstoffen. Die Konstruktion ist auf hohe Dauerbeanspruchung ausgelegt, sodass das Futter insbesondere in Serienfertigung, Instandhaltung und bei Maschinen mit kontinuierlichem Betrieb seine Stärken ausspielt. Die Kombination aus kompakter Bauform und Belastbarkeit erhöht die Maschinenverfügbarkeit. Wartungskonzept und Lebensdaueroptimierung Alle Verschleißteile sind einsatzgehärtet, geschliffen und austauschbar, was Wartungszyklen verkürzt und Stillstandzeiten reduziert. Die Möglichkeit, defekte Komponenten zu ersetzen, statt das komplette Futter zu tauschen, senkt die Gesamtkosten über den Lebenszyklus. Anwender mit hohem Teileumsatz schätzen die planbare Instandhaltung und die einfache Beschaffung kompatibler Ersatzteile. Für wen dieses Bohrfutter entwickelt wurde Das Produkt richtet sich an Werkstätten, Fertigungsbetriebe und Prüfbereiche, die auf wiederholbare Präzision und kurze Werkzeugwechselzeiten angewiesen sind. Anwender, die robuste Komponenten benötigen, finden hier ein Futter, das Belastbarkeit und Servicefreundlichkeit verbindet. Die Konstruktion ist ideal für Anwender, die eine zuverlässige Lösung für Rechtslauf-Maschinen suchen. Setzen Sie auf das ALBRECHT Schnellspannbohrfutter mit B 12 Kegelaufnahme für beständige Fertigungsqualität und kontaktieren Sie bei Fragen info@metav-werkzeuge.com oder telefonisch +49 2822 7131930. Produktmerkmale Artikelnummer: 4120167207NW Marke: ALBRECHT Produktart: Schnellspannbohrfutter Aufnahme: B 12 Fakten Spannbereich: 0,5–10 mm Außendurchmesser: 43 mm Verpackungseinheit: 1 Besonderheiten SBF: Schnellspannbohrfutter (schneller Werkzeugwechsel) Kegelaufnahme B 12: definierte Kegelverbindung, präzise Kraftübertragung Selbstspannend: automatische Spannfunktion für festen Halt Maximale Spannkraft: für sichere Werkzeugspannung Alle Verschleißteile einsatzgehärtet, geschliffen und austauschbar Drehrichtung: Rechtslauf FAQ Was bedeutet die Angabe B 12 bei der Aufnahme? Die Angabe B 12 bezeichnet die Kegelaufnahme des Bohrfutters; das Schnellspannbohrfutter SBF mit B 12 ist für Maschinen mit entsprechender Aufnahme genormt und gewährleistet formschlüssige Kraftübertragung. Für welche Bohrdurchmesser eignet sich das Futter? Das ALBRECHT Schnellspannbohrfutter deckt einen Spannbereich von 0,5–10 mm ab und ist somit für feine bis mittlere Bohrarbeiten geeignet. Sind Ersatzteile für das Bohrfutter verfügbar? Ja, beim Schnellspannbohrfutter sind alle Verschleißteile einsatzgehärtet, geschliffen und austauschbar, was gezielte Reparaturen und kosteneffiziente Instandhaltung ermöglicht. Kann das Bohrfutter auf Rechts- und Linkslaufmaschinen verwendet werden? Dieses Modell ist speziell für Rechtslauf ausgelegt. Für Linkslaufanwendungen sollten passende Alternativmodelle geprüft werden. Eignet sich das Futter für Serienbetrieb? Durch die robuste Bauweise, hohe Spannkraft und die Möglichkeit zum schnellen Austausch von Verschleißteilen ist das Schnellspannbohrfutter für den kontinuierlichen Betrieb in der Serienfertigung geeignet. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.5-10mm Quick-Change Drill Chuck Lightweight Self-Clamping Internal Thread For Right-Hand Rotation, 35.8mm - RÖHM
Benefit from a compact, self‑tightening chuck with a precise clamping range of 0.5–10 mm and a standard 1/2"-20 spindle interface; the light‑duty Supra S delivers reliable holding for everyday drilling tasks. Order the RÖHM Supra S through Metav Werkzeuge or contact our consultants for tailored advice. RÖHM Supra S quick‑change drill chuck — 0.5–10 mm clamping, 1/2"-20 thread The RÖHM Supra S is a light‑duty, self‑tightening quick‑change drill chuck designed for right‑hand rotation, providing a compact and efficient solution for workshop and production drilling applications. Self‑tightening mechanism for safer clamping Clamping range 0.5–10 mm 1/2"-20 spindle thread, internal mounting Compact diameter Ø 35.8 mm, light‑duty design Secure clamping for consistent drilling results The self‑tightening mechanism converts rotational torque into additional jaw clamping force, delivering a firmer hold during clockwise rotation. With a clamping range of 0.5–10 mm, the chuck accommodates a broad spectrum of small drills and accessories, reducing tool changeovers and downtime. This functional principle makes the chuck particularly suitable for repetitive drilling tasks where consistent concentricity and retention are essential. The benefit is fewer re‑clamps and more predictable hole quality on standard workshop materials. Compact spindle interface for fast integration A standard 1/2"-20 internal thread allows straightforward mounting to many drill spindles and adaptors commonly used in bench and portable machines. The compact outside diameter of Ø 35.8 mm keeps the tool envelope small, aiding access in confined setups and improving visibility at the workpiece. Reduced overhang supports better rigidity and helps to lower runout, which in turn extends the life of small‑diameter drills and minimises scrap rates on production runs. Light‑duty construction geared to everyday use The light‑weight construction suits general workshop and assembly‑line operations where ease of handling and quick tool changes are priorities. As a quick‑change chuck, it removes the need for a tightening key in many applications: the self‑tightening action secures tooling during rotation, while hand‑tightening during setup simplifies workflow. This design supports faster cycle times and less operator fatigue during frequent bit swaps, offering a practical balance between convenience and secure clamping. Practical maintenance and installation notes Installation requires the 1/2"-20 internal thread to match the spindle adaptor or machine arbor; correct mounting torque ensures axial alignment and longevity. Regular cleaning of the jaw slots and light lubrication of moving parts will maintain performance and reduce wear. For machines that run counterclockwise or require keyed torque beyond self‑tightening limits, selection of an alternative mounting or a keyed chuck may be appropriate. Technical advisors can recommend the optimal configuration for specific applications. For reliable, compact clamping from RÖHM, contact Metav Werkzeuge to arrange supply and receive technical guidance — info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: 4000832214NW Brand: RÖHM Product type: Quick‑change drill chuck Type designation: Supra S Facts Clamping range: 0.5–10 mm Spindle interface: 1/2"-20 (internal thread) Outside diameter: 35.8 mm Rotation direction: right‑hand rotation Packaging unit: 1 Special features Self‑tightening mechanism Light‑duty design Internal thread mounting Compact outer diameter for improved access FAQ Is the chuck suitable for keyless operation only? The RÖHM Supra S quick‑change drill chuck uses a self‑tightening principle and can be operated without a key for many routine drilling tasks; hand tightening during setup plus rotation secures the tool. What spindle connection is required to fit this chuck? The chuck mounts via a 1/2"-20 internal thread; ensure the machine spindle or adaptor has the matching 1/2"-20 male thread for correct installation. Which drill sizes are supported by the chuck? The clamping range covers 0.5–10 mm, making it suitable for small‑diameter drills and general workshop accessories within that span. Can the chuck be used for left‑hand rotation? The Supra S is specified for right‑hand rotation; use on machines with counter‑rotation is not recommended without confirming suitability with technical advisors. How should the chuck be maintained to ensure long life? Keep jaw slots clean, apply light lubrication to moving parts periodically and verify mounting tightness; these steps preserve clamping accuracy and extend service intervals. Manufacturer: RÖHM; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.5-10mm Quick-Change Drill Chuck Lightweight Self-Clamping Internal Thread For Right-Hand Rotation, 35.8mm - RÖHM
Take advantage of the self‑tightening clamping and compact, light‑duty construction for precise, low‑vibration drilling in handheld and small benchtop applications; order or request advice directly via Metav Werkzeuge for a tailored recommendation. RÖHM Supra S keyless drill chuck — 0.5–10 mm clamping range, 3/8"‑24 internal thread A RÖHM Supra S keyless drill chuck for light‑duty drilling, offering self‑tightening clamping and a 3/8"‑24 internal connection for right‑hand rotation. Self‑tightening, light‑duty design Clamping range 0.5–10 mm Internal 3/8"‑24 connection Suitable for right‑hand rotation Consistent clamping for accurate holes The self‑tightening mechanism provides secure clamping across the full 0.5–10 mm range, reducing the need for frequent re‑adjustment and helping to maintain concentricity under load. In practice this means fewer stoppages for re‑clamping and a steadier drill run, which is particularly valuable in repetitive tasks or when using smaller diameter tools. The compact body minimises overhang and contributes to reduced vibration, so hole quality remains consistent even in prolonged use. Compact interface that matches common spindle threads With an internal thread of 3/8"‑24, the chuck connects to a wide range of light‑duty spindles and handheld drills commonly found in workshops and maintenance departments. The modest outer diameter of 35.8 mm keeps the tool profile slim, making it easier to access confined workspaces and fixtures. This compact interface simplifies integration into existing setups and supports quick tool changes without the need for additional adapters. Designed for reliable right‑hand rotation Engineered specifically for right‑hand rotation, the chuck’s self‑tightening action helps convert torque into stronger clamping force during clockwise drilling, lowering the risk of slippage in normal operating conditions. This behavioural design choice enhances operational safety and efficiency, as fewer interruptions occur for retightening. For applications that use standard drilling directions, the mechanism translates into measurable time savings and a steadier workflow. Light weight and low‑maintenance handling The light‑duty construction of this chuck prioritises ease of handling and straightforward upkeep. Fewer moving components and a simple internal thread connection mean routine cleaning and lubrication keep the chuck performing well; there is no key required for operation, which reduces accessory clutter. The overall feel is one of nimble control and dependable repeatability, suited to technicians who value quick set‑ups and unobstructed visibility at the drill point. For a precise match to workshop requirements and reliable supply from Metav Werkzeuge, request further technical advice or a procurement recommendation from Metav Werkzeuge using the contact details below; the Metav team will advise on compatibility and delivery. Technical data Article number: 4000832213NW Product: Keyless drill chuck Type: Supra S Brand: RÖHM Design: Light‑duty, self‑tightening Facts Clamping range: 0.5–10 mm Outer diameter: 35.8 mm Connection: 3/8"‑24 internal thread Rotation direction: Right‑hand rotation Packaging unit: 1 Special features Self‑tightening mechanism Internal thread mounting Compact outer diameter Designed for right‑hand use FAQ What clamping range does the chuck cover? The chuck covers a 0.5–10 mm clamping range, allowing secure holding of round shanks and small drill bits. Which thread does the chuck use to attach to spindles? The chuck is supplied with an internal 3/8"‑24 connection suitable for compatible light‑duty spindles. Is this chuck suitable for handheld drills and small drill presses? Yes, the compact design and 3/8"‑24 internal mount make the chuck well suited to handheld drills and small benchtop spindles designed for light‑duty operation. How does the self‑tightening feature affect performance? The self‑tightening action increases clamping force under normal right‑hand rotation, reducing slippage and keeping tool runout steady during standard drilling tasks. What maintenance is required? Minimal maintenance is needed: keep the chuck clean, inspect for wear, and apply light lubricant as recommended to maintain smooth operation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.5-6.5mm Quick-Change Drill Chuck B10 Self-Clamping, High Clamping Force, Hardened Replaceable Parts - ALBRECHT
Combine the SBF quick-change drill chuck's self‑tightening clamping and hardened, replaceable wear parts for reliable, precision performance in continuous operation; order directly via Metav Werkzeuge or consult our specialists if clarification is required. SBF quick-change drill chuck, 0.5–6.5 mm clamping range (B10) – ALBRECHT The SBF quick-change drill chuck is a self‑tightening B10 chuck designed for right‑hand rotation, suited to precision drilling of small‑diameter tools in production and workshop environments. Self-tightening with maximum clamping force Clamping range 0.5–6.5 mm B10 taper for standard toolholders High runout accuracy for precision drilling Hardened, ground and replaceable wear parts Secure clamping for repeatable machining results The chuck provides a clamping range 0.5–6.5 mm, enabling secure holding of small‑diameter drills and reamers while reducing tool slippage. Its self‑tightening mechanism converts spindle torque into additional clamping force, which improves tool retention during right‑hand rotation and repetitive cycles. For workshop managers and production engineers, this translates into fewer rejected parts and more predictable machining outcomes thanks to a consistently stable interface between tool and spindle. Built for continuous use and straightforward maintenance Constructed with hardened, ground and replaceable wear parts, the unit is designed for high continuous load situations where component longevity matters. The B10 arbor interface ensures compatibility with common short‑arbour toolholders, while the overall design focuses on ease of service: worn components can be exchanged without replacing the entire chuck, keeping maintenance time and spare costs to a minimum. The combination of maximum clamping force and durable materials supports long duty cycles in light‑to‑medium production work. Precision and integration in tight‑tolerance workflows High runout accuracy is a decisive benefit where concentricity affects hole quality and subsequent assembly. The chuck’s geometry and finish are optimised to maintain concentricity at small diameters, improving drill life and surface finish. As a compact, B10‑mounted toolholder for right‑hand rotation, it integrates smoothly into existing spindles that accept this arbor standard, making it a practical choice for small‑part production, toolrooms and retrofit applications that demand predictable repeatability and minimal set‑up time. Choose the ALBRECHT SBF quick-change drill chuck for dependable small‑diameter toolholding and contact Metav Werkzeuge for tailored application advice or to place an order via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4120167203NW Brand: ALBRECHT Product type: Schnellspannbohrfutter Arbor: B 10 SKU: 4120167203NW Facts Clamping range: 0.5–6.5 mm Outer diameter: 34 mm Packaging unit: 1 piece Rotation direction: right‑hand rotation Special features self‑tightening maximum clamping force with taper arbor (B10) for high continuous load and highest runout accuracy all wear parts case‑hardened, ground and replaceable suitable for right‑hand rotation FAQ How precise is the runout for this chuck? The ALBRECHT SBF quick‑change drill chuck is specified for highest runout accuracy, designed to maintain concentricity for small‑diameter drills and improve hole quality. Which arbor does the chuck use and is it compatible with standard holders? The chuck is supplied with a B10 arbor, compatible with standard toolholders that accept the B10 taper. What is the clamping range and which tools can be used? Clamping range is 0.5–6.5 mm, suitable for small twist drills, reamers and similar tools within that diameter range. Are worn components replaceable or must the entire chuck be changed? All wear parts are hardened, ground and replaceable, so individual components can be exchanged without replacing the complete chuck. Is the chuck suitable for continuous production use? Yes; the SBF chuck is designed for high continuous load and heavy duty cycles while maintaining runout accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.5-6.5mm Quick-Change Drill Chuck MK2 Self‑Clamping High Runout Accuracy, Right‑Hand - ALBRECHT
Take advantage of the combination of self‑tightening MT2 design and 0.5–6.5 mm clamping range for consistent drilling results; order the chuck directly via Metav Werkzeuge or consult our advisers for application guidance. ALBRECHT SBF‑plus Quick‑Change Drill Chuck — 0.5–6.5 mm, MT2 shank ALBRECHT SBF‑plus is a compact, self‑tightening quick‑change drill chuck with an MT2 shank, engineered for right‑hand rotation in workshop and light production drilling tasks. Self‑tightening MT2 shank Clamping range 0.5–6.5 mm High runout accuracy Compact integrated chuck and shank Consistent hole quality through stable clamping The SBF‑plus quick‑change drill chuck delivers repeatable clamping across its clamping range 0.5–6.5 mm, reducing rework and scrap in series production. The compact construction and the design where the chuck and shank form a single unit ensure minimal radial play and therefore high runout accuracy, which translates into straighter holes and longer tool life. For process‑oriented shops, this means fewer machine stops and more predictable cycle times. Easier handling and secure operation for workshop use Equipped with an MT2 shank and an integrated Morse taper, the unit is self‑tightening, so the clamping action increases with torque during right‑hand rotation. This mechanical advantage simplifies tool changes and reduces auxiliary tightening steps while maintaining secure retention. The compact layout and 34 mm outer diameter make the chuck suited to confined spindles and retrofit applications where space and stability are both critical. Robust design that supports reliable workflows The compact assembly is engineered for stability: because the chuck and shank form one unit, alignment is preserved and mechanical interfaces are minimised. The result is a durable solution that supports continuous drill cycles with reduced vibration and more consistent centre points. This reliability enhances throughput and contributes to a predictable maintenance schedule, supporting shops that prioritise uptime and steady output. For dependable workshop performance with an Albrecht SBF‑plus quick‑change drill chuck, request the item via Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice. Technical Data Article number: 4000832535NW Product type: Quick‑change drill chuck (SBF‑plus) Manufacturer: ALBRECHT Core technical data Clamping range: 0.5–6.5 mm Outer diameter: 34 mm Shank: MT2 Rotation direction: Right‑hand rotation Special features Integrated Morse taper, self‑tightening Compact construction for high runout accuracy Chuck and shank form one unit FAQ What is the clamping range of this chuck? The chuck accepts tools in the 0.5–6.5 mm range, suitable for small‑diameter drills and reamers used in precision tasks. Which spindle taper does the chuck use? This version is supplied with an MT2 shank (Morse taper No.2), allowing direct mounting into compatible machine spindles and arbors. Is the chuck suitable for right‑hand rotation only? Yes, the design is optimised for right‑hand rotation, with a self‑tightening action that increases holding force under clockwise torque. How does the self‑tightening mechanism improve performance? The self‑tightening feature ensures the jaws bite more firmly during rotation, improving retention and reducing the risk of tool slippage during drilling. Can this chuck be used where space is limited? The compact build and 34 mm outer diameter make the chuck a good option for confined spindle spaces while maintaining stability and runout precision. Manufacturer: ALBRECHT / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1,5-13mm Schnellspannbohrfutter mit Hartmetall-Backen, Rechts- und Linkslauf, durchbohrt, Staubschutz - TECWERK
Schnellspannbohrfutter Spann-D.1,5-13mm 1/2Zoll-20mm f.Re.-/Li.-Lauf RÖHM – Schnellspannbohrfutter Das Schnellspannbohrfutter Spann-D.1,5-13mm 1/2Zoll-20mm f.Re.-/Li.-Lauf RÖHM bietet zuverlässiges Spannvermögen für Akku- und Netz-Bohrmaschinen und ist ausgelegt für Rechts- und Linkslauf. Schnellspannbohrfutter für 1,5–13 mm Radialverriegelung für sicheren Halt Für Akku- und Netz-Bohrmaschinen geeignet Schlagbohrfest mit Staubschutz Durchbohrt, Hartmetall-Backen bei 13 mm Robuste Bauweise für präzise Spannung und lange Lebensdauer Das Schnellspannbohrfutter wurde für den harten Werkstattalltag konstruiert. Die Kombination aus präziser Backenführung und Hartmetall-Backen bei 13 mm sorgt für gleichbleibenden Kraftschluss und reduziert Rundlauffehler. Durch die robuste Konstruktion bleibt die Spannkraft auch unter Belastung erhalten, was die Produktivität bei Daueranwendungen steigert. Anwender profitieren von geringeren Ausfallzeiten, weil die Komponente verschleißarm ausgelegt ist und selten nachgestellt werden muss. Vielseitige Einsatzmöglichkeiten und Kompatibilität Dank der Aufnahme 1/2”-20 passt das Bohrfutter an viele handelsübliche Bohrmaschinen; die durchbohrte Ausführung ermöglicht den Einsatz mit Längs- und Querzuführung sowie mit Zentrierspitzen. Die Eignung für Akku-Bohrmaschinen und Schrauber sowie für Netz-Bohrmaschinen mit selbsttätiger Nachstellung macht das Produkt zur flexiblen Wahl für Montage, Werkstatt und Baustelle. Die Möglichkeit, im Rechts- und Linkslauf zu arbeiten, erweitert das Anwendungsspektrum insbesondere bei reversiblen Arbeitsgängen. Sichere Handhabung und wartungsfreundliche Details Die integrierte Radialverriegelung erleichtert das schnelle Wechseln von Werkzeugen und minimiert Verrutschen bei hohen Drehmomenten. Ein Staubschutz erhöht die Lebensdauer, indem er Verschmutzung aus der Backenführung fernhält, und die schlagbohrfeste Auslegung erlaubt anspruchsvolle Arbeiten mit Schlagfunktionen. Die durchbohrte Bauform unterstützt außerdem die Kühlmittelzufuhr und erleichtert die Reinigung, was die Wartung vereinfacht und die Standzeit verbessert. Empfehlung: Das Schnellspannbohrfutter von TECWERK für robuste, präzise Spannaufgaben wählen und bei technischen Fragen direkt Metav kontaktieren unter info@metav-werkzeuge.com oder Tel. +49 2822 7131930 Produktmerkmale Artikelnummer: 4000832123NW Marke: TECWERK Produktart: Schnellspannbohrfutter Daten Spannbereich: 1,5–13 mm Aufnahme: 1/2” - 20 (Gewindeaufnahme, kompatible Schaftaufnahme) Verpackungseinheit: 1 Besonderheiten Radialverriegelung Für Akku-Bohrmaschinen und Schrauber Netz-Bohrmaschine mit selbsttätiger Nachstellung Schlagbohrfest Mit Staubschutz Durchbohrt Hartmetall-Backen bei 13 mm Drehrichtung: Rechts- und Linkslauf FAQ Welche Bohrergrößen lassen sich mit dem Schnellspannbohrfutter verwenden? Das Schnellspannbohrfutter Spann-D.1,5-13mm 1/2Zoll-20mm f.Re.-/Li.-Lauf RÖHM akzeptiert Bohrer im Bereich von 1,5 bis 13 mm und eignet sich somit für feine bis mittelgroße Bohrungen. Ist das Bohrfutter für Akku-Bohrmaschinen geeignet? Ja, das Bohrfutter wurde ausdrücklich für den Einsatz an Akku-Bohrmaschinen und Schraubern entwickelt und bietet durch die Radialverriegelung sicheren Halt auch bei hohen Drehmomenten. Kann das Bohrfutter bei Schlagbohrarbeiten verwendet werden? Das Produkt ist schlagbohrfest ausgelegt und verfügt über einen Staubschutz, sodass der Einsatz mit Schlagfunktionen möglich ist, ohne die Funktion wesentlich zu beeinträchtigen. Welche Aufnahme hat das Bohrfutter und wie ist es befestigt? Die Aufnahme ist 1/2” - 20, wodurch das Bohrfutter an entsprechende Maschinen mit dieser Gewinde- oder Schaftaufnahme angepasst werden kann. Hersteller: NORDWEST Handel AG; Robert-Schuman-Straße 17; 44263 Dortmund
1-10mm Quick-Change Drill Chuck 1/2”‑20, Right/Left Rotation, Through‑Bored, Dust‑Protected - TECWERK
Benefit from secure, reversible drilling thanks to the combination of a 1–10 mm clamping range and a standard 1/2"‑20 mount; the radial locking and dust protection ensure reliable performance in cordless and mains applications — order via Metav Werkzeuge or consult the specialists for specification advice. Quick-change drill chuck 1–10 mm (1/2"‑20) — TECWERK quick-change drill chuck with radial locking and reversible rotation Quick-change drill chuck 1–10 mm (1/2"‑20) for cordless and mains drills: a compact, impact-capable chuck designed to hold standard straight-shank and round-shank tools for general workshop and trade use. 1–10 mm clamping range for versatile tooling 1/2"‑20 mount for standard drill spindles Radial locking for secure, slip-free hold Through-drilled with dust protection Faster set-ups through secure, repeatable clamping The compact chuck delivers a 1–10 mm range that covers common drill sizes, enabling rapid tool changes without the need for adapters. The combination of a quick-change mechanism and radial locking provides a positive clamping action that reduces slippage under load; this translates into fewer interrupted cycles and steadier hole quality. For users unfamiliar with the term, radial locking is a mechanical feature that locks the jaws firmly around the tool shank, improving torque transmission during drilling operations. Built for reversible and impact-capable operation Engineered for right/left rotation, the chuck supports tasks that require reversible direction, such as screw extraction or thread-chasing. Its shockproof construction and through-drilled body make it suitable for hammer-capable drills where intermittent impacts occur; the through-drilled design also allows unobstructed centre access for long workpieces. These characteristics make the chuck a pragmatic choice when reversible torque and occasional impact resistance are essential. Broad compatibility with cordless and mains drills The 1/2"‑20 threaded mount fits a wide range of drill spindles commonly found on both cordless drills and mains units. The chuck’s self-adjusting capacity, described in the technical details, ensures even jaw travel for concentric clamping across the specified range. Compatibility with standard spindles reduces inventory complexity and makes the chuck a flexible component for mixed tool fleets in small workshops and service departments. Low-maintenance design for reliable service life A practical construction with dust protection and optionally reinforced carbide jaws at relevant sizes reduces wear and extends service intervals. The through-drilled bore eases cleaning and prevents dust build-up in the spindle interface; routine light lubrication and inspection of the jaws are sufficient to maintain consistent performance. The overall design focuses on uptime and predictable behaviour under typical workshop conditions, supporting smoother production flows and less unscheduled maintenance. Order the TECWERK quick-change drill chuck via Metav Werkzeuge for dependable, reversible drilling — for specification checks or compatibility questions contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 4000832120NW Product type: Quick-change drill chuck Brand: TECWERK Facts Clamping range: 1–10 mm Mount / spindle thread: 1/2"‑20 Rotation: right and left rotation Packaging unit: 1 Special features Radial locking For cordless drills and screwdrivers Mains drill with self-adjusting function Shockproof / impact-capable design Dust protection Through-drilled body Carbide jaws at 13-mm chuck size indicated FAQ Is this chuck suitable for hammer or impact drilling? The TECWERK quick-change drill chuck is described as shockproof and suitable for impact-capable use, making it compatible with many hammer drills for intermittent masonry or heavy-duty tasks. Which spindle standard does the chuck use? The chuck mounts on a 1/2"‑20 spindle thread, a common standard for many drill spindles on both cordless and mains drills. What clamping range does the chuck cover? The chuck covers a 1–10 mm clamping range, accommodating most standard drill bits and small accessories without adapters. Are carbide jaws included? The product notes indicate carbide jaws are specified in relation to the 13 mm chuck option; this improves wear resistance where higher durability is required. How does the through-drilled feature help in practice? A through-drilled body allows clearance along the chuck axis, which assists with long workpieces and simplifies cleaning; it also supports certain centre-drilling or coolant arrangements. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
1-13mm Quick-Change Drill Chuck B16 Self-Clamping Lightweight For Right-Hand Rotation, 40.2mm - RÖHM
Take advantage of the chuck’s light-duty construction, self-closing jaws and compact B16 taper mount to speed up tool changes and maintain secure bit retention in hand-held applications; order supply and technical advice directly via Metav Werkzeuge or contact our team for compatibility queries. Supra S quick-change drill chuck — clamping range 1–13 mm, B16 mount (RÖHM) A Supra S quick-change drill chuck designed for light-duty, hand-held machines with self-closing jaws and a B16 taper mount for right-hand rotation Self-closing design for secure bit retention Light-duty version for handheld machines B16 taper mount for standard spindles Clamping range 1–13 mm, outer Ø 40.2 mm Proven compatibility for fast, reliable drilling This compact quick-change chuck delivers a practical combination of compatibility and dependable function. With a B16 mount and a clamping range of 1–13 mm, the unit seats directly in compatible spindles and accepts a broad range of drill shanks and accessories. The self-closing jaws tighten under rotation, decreasing the risk of slippage during normal right-hand operation and reducing re-tightening time. This makes the chuck particularly suitable for workshops that prioritise straightforward integration and steady performance in routine drilling tasks. Improves workshop efficiency and ergonomics Designed as a light-duty version for hand-held use, the chuck reduces handling strain without compromising control. The modest outer diameter of 40.2 mm and the overall lightweight design speed up changeovers and improve access in confined workspaces. Faster tool changes mean less downtime between operations, a clear advantage in busy small-scale production or repair environments. The compact dimensions also simplify storage and transport between workstations, supporting a more efficient workflow. Simple operation and low maintenance for busy teams The self-closing mechanism is engineered for practical, maintenance-light operation: the jaws close automatically during clockwise rotation, ensuring reliable clamping without additional keys. The taper B16 connection offers secure seating with minimal setup, while the straightforward design keeps servicing needs low; occasional inspection and standard lubrication are typically sufficient to sustain dependable operation. The chuck’s right-hand orientation matches conventional spindle directions, avoiding additional adjustments on most machines. Backed by practical support and workshop readiness Stocked and supplied via Metav Werkzeuge, the chuck benefits from a dedicated supply chain and straightforward availability for European workshops. Metav’s emphasis on accessible precision ensures transparent ordering and reliable delivery from Emmerich, while technical advice is available for compatibility checks with specific hand-held machines. This combination of a compact, well-engineered chuck and dependable distribution reduces procurement complexity and supports a predictable production flow. Contact Metav Werkzeuge for tailored compatibility checks and swift supply from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 to confirm fitment and lead time Technical data Article number: 4000832203NW Product: Quick-change drill chuck Type: Supra S Manufacturer: RÖHM Facts Clamping range: 1–13 mm Outer diameter: 40.2 mm Mount: B16 taper Rotation direction: right-hand Packaging unit: 1 Special features Self-closing Light-duty execution for hand-held machines Intended for right-hand rotation Taper mount for quick seating FAQ What spindle mount does the chuck use? The chuck uses a B16 taper mount, as stated for the Supra S quick-change drill chuck (SKU 4000832203NW), and is intended for compatible spindles with a B16 seating. Which bit sizes are compatible with this chuck? Clamping range is 1–13 mm, so the chuck accommodates standard round-shank drill bits and accessories within that diameter range. Can the chuck be used on hand-held drills? Yes, the light-duty version is specifically described for hand-held machines and offers a compact, ergonomic solution for portable drilling tasks. How does the self-closing feature work? The self-closing jaws tighten during normal right-hand rotation, providing secure bit retention without the need for a separate key under typical operating conditions. Is special maintenance required? Maintenance is minimal: routine inspection and standard lubrication are usually sufficient to keep the chuck in reliable service; follow machine manufacturer recommendations for best results. Manufacturer: RÖHM; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/2"‑20mm Quick‑Change Drill Chuck 1–13mm Self‑Clamping Right/Left Rotation, 42.8mm OD - RÖHM
The Supra SK quick-change system combines self-tightening clamping, a 1–13 mm clamping range and a robust 1/2"-20 mounting for reliable, fast tool changes in demanding workshop and industrial environments; order via Metav Werkzeuge or consult our specialists for compatibility advice. Supra SK quick-change drill chuck by RÖHM — self-tightening, 1–13 mm clamping range The Supra SK is a self-tightening quick-change drill chuck engineered for rapid tool changes on rotary and hammer drills, offering secure clamping for both right- and left-hand rotation applications. Self-tightening quick-change mechanism Clamping range 1–13 mm 1/2"-20 mounting thread for secure fit Suitable for right and left rotation Reduce cycle time with rapid, reliable tool changes A self-tightening quick-change mechanism speeds up the exchange of drill tools and reduces non-productive time. The combination of self-tightening action and a compact design means the chuck grips standard shank sizes across a 1–13 mm clamping range, enabling a single chuck to cover a wide range of jobs. This translates into fewer chuck swaps, shorter set-up times and consistent repeatability on series operations. For production-focused workshops and maintenance shops alike, the result is a measurable improvement in throughput without complex adjustments. Confident clamping under impact and reversing loads Designed to tolerate aggressive duty, the chuck features a clamping-force safety element that protects both the tool and the workpiece when used in heavy-duty hammer or high-frequency rotary applications. Compatibility with right- and left-hand rotation ensures secure operation during reversible drills or where thread-back prevention is required. The robust construction and safety provision reduce the risk of slippage and tool damage, supporting consistent hole quality and longer tool life in daily use. Compact mounting for broad machine compatibility Fitted with a 1/2"-20 mounting thread, the chuck integrates easily with common drill spindles and adaptors while preserving a small footprint — the outer diameter 42.8 mm helps maintain accessibility in confined setups. The compact dimensions and straightforward clamping action make the unit suitable for bench, stand and portable drills where quick-change performance and low overhang are important. Supplied as a single unit in a ready-to-fit condition, it simplifies inventory and replacement logistics in professional workshops. For workshop managers and service technicians seeking durable, fast-change clamping, contact Metav Werkzeuge to arrange technical matching of the RÖHM Supra SK quick-change drill chuck to existing spindles or to request application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000832132NW Manufacturer: RÖHM Product type: Quick-change drill chuck Type: Supra SK SKU: 4000832132NW Facts Clamping range: 1–13 mm Mounting: 1/2"-20 Outer diameter: 42.8 mm Packaging unit: 1 Special features Self-tightening, for rapid clamping and release Clamping-force safety for hammer drills with high natural frequency Suitable for right- and left-hand rotation Designed for fast tool changes and robust workshop use FAQ What clamping range does the Supra SK cover? The RÖHM Supra SK quick-change drill chuck covers a 1–13 mm clamping range, suitable for common fractional and metric shank sizes. Is the chuck suitable for reversible rotation? Yes, the Supra SK is designed for right- and left-hand rotation, making it suitable for reversible drills and applications requiring reverse torque. Which mounting does the chuck use and how compact is it? The chuck attaches via a 1/2"-20 mounting thread and has an outer diameter of 42.8 mm, offering a compact interface for various spindles. Does the Supra SK provide protection during hammer use? The chuck incorporates a clamping-force safety measure intended to secure the tool and reduce slippage when used on hammer drills or machines with significant self-frequency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/2” - 20mm Quick-Change Keyless Drill Chuck 1–10mm, Through-Hole Dust-Protected Radial Locking - RÖHM
Combine a robust metal housing and radial locking with a wide 1–10 mm clamping range and a 1/2"–20 threaded mount for reliable, low-maintenance performance; order the EXTRA80-RV directly via Metav Werkzeuge or consult our experts if further technical clarification is required. EXTRA80-RV quick-change drill chuck — 1–10 mm, 1/2"–20, RÖHM A EXTRA80-RV quick-change drill chuck engineered for cordless and mains drills, offering radial locking, hammer-drill resistance and through-drilled construction for demanding workshop applications 1–10 mm clamping range 1/2"–20 threaded receptacle Metal housing with radial locking Hammer-drill proof and dust-protected Robust construction for consistent clamping and reduced runout The EXTRA80-RV combines a solid metal housing with radial locking to deliver a steady grip across its 1–10 mm clamping range. The 1/2"–20 threaded receptacle ensures secure attachment to standard chucks and adaptors, while the compact external diameter supports use in confined tool-holders. This construction reduces radial runout and vibration, which translates directly into more accurate drilling and extended tool life. Reliability of the clamping interface is particularly advantageous in repetitive production tasks where consistent hole quality is essential. Versatile compatibility for cordless, mains and hammer applications Designed for both cordless drivers and mains-operated drills with automatic re-adjustment, this quick-change chuck is hammer-drill proof and rated for right- and left-hand rotation, allowing use in reversible applications and in tasks that require alternating rotational directions. The through-drilled body permits unobstructed passage for long bits or for clearing debris, contributing to uninterrupted machining cycles. These features make the chuck suitable for workshop, maintenance and light industrial environments where flexibility and minimised downtime are priorities. Durable jaw seating and low-maintenance operation to boost uptime The chuck features jaw seating chamfers made of carbide, offering high wear resistance and stable clamping over extended service intervals. With integrated dust protection and a radial lock that speeds up bit changes, the design reduces the need for frequent adjustments and minimises contamination-related faults. Routine upkeep is straightforward: inspect the jaw seats for wear, keep the through-drilled opening clear and apply light lubrication to moving parts when necessary. The result is a compact, long-lived clamping solution that supports continuous production with minimal intervention. For tailored advice on the RÖHM EXTRA80-RV quick-change drill chuck and fast supply from Metav Werkzeuge, please contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000832111NW Type: EXTRA80-RV Product: Quick-change drill chuck Brand: RÖHM Facts Clamping range: 1–10 mm Thread mount: 1/2"–20 Outer diameter: 42.7 mm Rotation: Right- and left-hand Packaging unit: 1 Special features Metal housing Radial locking For cordless drills and drivers Suitable for mains drills with self-acting re-adjustment Hammer-drill proof Dust protection Through-drilled construction Jaw seating chamfers made of carbide Drilling direction: right- and left-hand rotation FAQ Can this chuck be used with cordless drills? Yes. The EXTRA80-RV quick-change drill chuck is designed for cordless drills and drivers as well as mains machines, offering secure clamping across the 1–10 mm range. Is the chuck suitable for hammer-drilling tasks? Yes. The RÖHM EXTRA80-RV is specified as hammer-drill proof, which means it withstands percussive loads typical of hammer-drilling operations. What thread mount is required to fit the chuck? The chuck mounts to a 1/2"–20 thread; the SKU 4000832111NW identifies the EXTRA80-RV quick-change drill chuck with this receptacle. How does the radial locking benefit workshop use? Radial locking ensures fast, repeatable bit changes and a secure grip, reducing slippage and downtime when working with the EXTRA80-RV in production or maintenance environments. Are the jaw seats wear-resistant? Yes. The jaw seating chamfers are made of carbide, providing superior wear resistance and prolonging the service life of the chuck under frequent use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/2”-20 1.5–13mm Quick-Change Drill Chuck Radial Lock, 51mm Compact, Through-Hole - RÖHM
Compact, service-ready performance combined with robust clamping precision and a space-saving form factor make this chuck an efficient choice for mixed workshop use; the metal housing and carbide jaw chamfers ensure secure bit retention even under impact conditions while the 1.5–13 mm clamping range covers most common twist drills. Order the EXTRA50-RV keyless drill chuck directly via Metav Werkzeuge or ask our consultants if needed. RÖHM EXTRA50-RV keyless drill chuck – 1.5–13 mm clamping, 1/2"-20 mount The EXTRA50-RV is a compact, radial-lock keyless drill chuck designed for cordless and mains drills, offering reversible operation for right and left rotation. Compact 51 mm open-jaw length Carbide jaw chamfers for secure grip Radial locking in metal housing Impact-drill resistant with dust protection Reduced machine head load for smoother handling The compact construction of this keyless chuck reduces the mass at the tool head, improving balance and lowering operator fatigue during repetitive tasks. With a clamping range of 1.5–13 mm and an external diameter of 42.4 mm, the unit keeps the centre of gravity close to the spindle, which benefits both handheld and bench-mounted drilling operations. The short installed length (approx. 51 mm with jaws open) also helps when working in confined spaces or tight setups, contributing directly to faster set-ups and steadier drilling results. Durable build for continuous workshop use Built with a metal housing and a radial locking mechanism, the chuck withstands everyday workshop stresses. The carbide jaw chamfers deliver consistent bite on drill shanks, reducing slippage under load and preserving concentricity over time. The design includes impact-drill resistance and dust protection, features that extend service life where dust and hammering actions are present. Through-drilled construction allows for easy bit cleaning or lubrication without disassembly, supporting lower maintenance intervals and greater uptime. Universal compatibility and fast tool changes Fitted with a 1/2"-20 mounting thread, the chuck mates with standard arbors and many handheld spindles, enabling quick integration into existing tool fleets. Support for right and left rotation makes it suitable for screwdriving reversals and applications requiring counter-rotation. The keyless mechanism delivers rapid bit changes, reducing downtime during production or repair tasks and improving overall workflow efficiency. For workshops that value adaptability, the chuck's compactness and robust jaw geometry ensure reliable performance across a wide range of drilling and fastening operations. For reliable fitment and supply, contact Metav Werkzeuge in Emmerich for tailored advice on the RÖHM EXTRA50-RV keyless drill chuck and delivery options: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 8002877481NW Type: EXTRA50-RV Label: Schnellspannbohrfutter EXTRA50-RV Spann-D.1,5-13mm 1/2Zoll-20mm Manufacturer: RÖHM Product type: Keyless drill chuck Mounting: 1/2”-20 Facts Clamping range: 1.5–13 mm Outside diameter: 42.4 mm Length (with open jaws): 51 mm Packaging unit: 1 Rotation: Right and left Special features Metal housing Radial locking mechanism Suitable for cordless drills and screwdrivers Suitable for mains drills with self-adjusting operation Impact-drill resistant Dust protection Through-drilled design Carbide jaw chamfers for enhanced grip Very compact form for reduced head load FAQ Is the EXTRA50-RV compatible with standard drill spindles? The RÖHM EXTRA50-RV keyless drill chuck uses a 1/2"-20 mount and is compatible with spindles and arbors that accept that thread, enabling straightforward retrofitting in many workshop setups. What bit diameters can be used with this chuck? The chuck clamps twist drills and similar shanks in the 1.5–13 mm range, covering a broad spectrum of common drilling and fastening sizes. Can the chuck be used with hammer or impact drilling? Yes, the design states impact-drill resistant construction; combined with the metal housing and dust protection this makes the chuck suitable for demanding conditions where occasional hammer action occurs. How does the radial locking benefit workshop safety? Radial locking secures the jaws under torque, improving bit retention and reducing the risk of slippage; the carbide jaw chamfers further enhance stable clamping during high-load operations. Is the chuck suitable for reversible applications? The EXTRA50-RV supports right and left rotation, so it is suitable for operations that require reversible turning, such as screw extraction or certain tapping tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1/2”-20 SDS Plus Quick-Change Drill Chuck 1.5–13mm, Carbide Jaw Faces, Right/Left Rotation - RÖHM
Take advantage of a robust SDS plus connection and a 1.5–13 mm clamping range for flexible, workshop-grade performance, combined with radial locking and carbide jaw chamfers for dependable tool retention; order the chuck directly via Metav Werkzeuge or consult the Metav specialists for technical advice. EXTRA80-RV keyless drill chuck — 1.5–13 mm clamping range, 1/2"-20 SDS plus shank (RÖHM) The EXTRA80-RV keyless drill chuck adapts SDS plus rotary hammers and cordless machines to accept standard round-shank bits from 1.5 to 13 mm, providing secure clamping in both forward and reverse rotation for trade and industrial use SDS plus 1/2"-20 shank Clamping range 1.5–13 mm Radial locking for secure hold Carbide jaw chamfers for long life Secure clamping for demanding workshop use The chuck is designed to deliver a secure hold across the entire 1.5–13 mm range. The radial locking mechanism ensures the clamping action is centred and resistant to axial forces, while the carbide jaw chamfers reduce wear when frequently changing bits. This construction reduces slippage during heavy drilling sequences and is particularly suitable for workspaces where rapid bit changes and reliable retention are essential. The result is fewer interruptions and a steadier production rhythm. Compatibility and robust construction reduce downtime Fitted with a 1/2"-20 SDS plus shank, the chuck allows direct mounting to compatible rotary hammers and can be used with mains and cordless drilling machines. A metal housing and impact-drill-proof design protect internal components under shock loads typical of masonry and heavy-duty tasks. Support for right- and left-hand rotation broadens application scope, enabling tasks such as screwdriving reversal or thread-facing without requiring multiple chucks. The interface is standardised, so machine compatibility is quickly established. Practical efficiency and serviceability on the shop floor Being a keyless design, the chuck permits quick, tool-free bit changes which accelerates setup and reduces downtime. The combination of a compact outer diameter and rugged materials keeps the centre of gravity close to the tool shaft, improving balance during high-speed operation. Maintenance is straightforward: occasional cleaning and inspection of the jaw faces keeps the system performing as intended. For production environments seeking reliability and simple servicing, the chuck provides a resilient, low-maintenance clamping solution. For RÖHM reliability and workshop-ready performance with the EXTRA80-RV keyless chuck, contact Metav Werkzeuge in Emmerich for stock information and technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 8002875404NW Type: EXTRA80-RV Product: Keyless drill chuck Brand: RÖHM Shank: 1/2”-20 SDS plus Core data Clamping range: 1.5–13 mm Outer diameter: 42.5 mm Threads: 1/2"-20 Packaging unit: 1 Special features Radial locking Metal housing Impact-drill-proof Carbide jaw chamfers For right- and left-hand rotation Suitable for mains and cordless drills FAQ What clamping range does the chuck cover? The EXTRA80-RV keyless drill chuck from RÖHM covers a clamping range of 1.5–13 mm, suitable for a broad range of round-shank drill bits. Which shank interface is used for mounting? The chuck uses a 1/2"-20 SDS plus shank, enabling direct fitment to compatible SDS plus rotary hammers and adaptors on many drilling machines. Is the chuck suitable for use with hammer drilling? Yes — the chuck features a metal housing and an impact-drill-proof design, making it suitable for heavy-duty and hammer-drilling applications when mounted on appropriate machines. Does the chuck support reversible operation? The EXTRA80-RV is specified for right- and left-hand rotation, allowing use in both forward and reverse directions for tasks requiring reversal. Are the jaws wear-resistant? The jaw faces are chamfered in carbide, providing enhanced wear resistance and extended service life under frequent use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Heavy-Duty Quick-Change Drill Chuck 1–13mm B16 Right-Hand - TECWERK
Take advantage of a self‑clamping, heavy industrial chuck with a wide 1–13 mm range and a B16 taper for secure mounting; it delivers reliable clamping and straightforward integration into stationary drilling setups. Order directly via Metav Werkzeuge or contact the consultants for specification support. TECWERK keyless drill chuck B16, 1–13 mm — heavy industrial, self‑clamping The TECWERK keyless drill chuck B16 1–13 mm is a heavy‑duty chuck designed for stationary machines, offering secure tool retention and compatibility with right‑hand rotation setups. Heavy industrial design for stationary machines Self‑clamping mechanism for secure tool grip Clamping range 1–13 mm for versatile tooling B16 taper arbor, right‑hand rotation, Ø 46 mm outer Reliable clamping for uninterrupted machining The chuck provides secure clamping through a self‑clamping mechanism that reduces the risk of tool slippage and minimises interruptions during operation. With a 1–13 mm clamping range, the device accommodates common drill shanks and small tooling without adapters, which simplifies tool inventory and changeovers. This design lowers the likelihood of lost production time, as the firm grip improves concentricity and helps maintain consistent drilling quality across batches. Rapid tool changes to maintain throughput A key advantage of the keyless design is speed: the keyless chuck enables fast insertion and release of tools, reducing non‑productive time between runs. The B16 taper provides a standardised mounting interface for many bench and pillar drills found in production and maintenance workshops. Specified for right‑hand rotation, the chuck matches the spindle direction of most conventional drilling machines, guaranteeing correct engagement and predictable performance when swapping tools during tight production schedules. Engineered for demanding workshop environments Built as a heavy industrial design, the chuck tolerates the rigours of continuous use in workshop and light industrial settings. The Ø 46 mm outer profile offers a compact footprint while ensuring mechanical robustness for repetitive cycles. Regular inspection and basic maintenance preserve performance; the straightforward construction allows for cleaning and lubrication without complex disassembly, supporting long‑term durability and reliable runout behaviour in everyday operations. Clear application scope and integration benefits Intended primarily for fixed machinery, the chuck suits pillar and bench drills that accept a B16 arbor and operate in right‑hand rotation mode. Its universal clamping range makes it appropriate for general drilling tasks in workshops, maintenance bays and small production lines where dependable tool retention is essential. Compatibility with common drill shank sizes reduces the need for special adapters, simplifying procurement and tool management for purchasing teams. For procurement or technical queries about the TECWERK keyless drill chuck and its suitability for specific machines, contact Metav Werkzeuge for prompt advice and stock information. Technical Data Article number: 2000832053NW Product: Keyless drill chuck Mounting: B16 Clamping range: 1–13 mm Outer diameter: 46 mm Form: heavy industrial design Rotation direction: right‑hand rotation Facts Clamping range: 1–13 mm Outer diameter: 46 mm Package unit: 1 Special features Self‑clamping mechanism Heavy industrial execution for stationary machines B16 taper arbor Designed for right‑hand rotation FAQ What machines is this chuck compatible with? The chuck mounts to machines with a B16 arbor and is designed for stationary drills that operate with right‑hand rotation; the TECWERK keyless drill chuck B16 1–13 mm fits standard pillar and bench drill spindles using that taper. Can the chuck handle quick successive tool changes? Yes, the keyless design on the TECWERK chuck enables rapid tool swaps without a key, which helps to maintain throughput in production and workshop environments. Is the clamping range suitable for common drill sizes? The 1–13 mm clamping range covers the majority of everyday drill shanks used in maintenance and general machining, reducing the need for multiple specialised chucks. How does the self‑clamping mechanism improve performance? The self‑clamping action secures the tool shank firmly, improving concentricity and reducing slippage, which leads to more consistent hole quality and fewer tool‑related stoppages. Are there special maintenance requirements? Basic cleaning and occasional lubrication keep the chuck performing reliably; its industrial construction is intended for straightforward serviceability under normal workshop maintenance routines. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
150mm Precision Quick-Change Drill Chuck 0-10mm Range B12 Taper Right-Hand High-Speed Hardened Components - RÖHM
Take advantage of the combination of precision, durable construction and rapid tool changes to keep production running smoothly; the self-tightening design and hardened wear parts ensure stable clamping at high speeds. Order the chuck directly via Metav Werkzeuge or consult the team for application advice. Spiro quick-change drill chuck — precision execution, 0–10 mm, B12, RÖHM The Spiro quick-change drill chuck in precision execution is designed for right-hand rotation and engineered for high-speed, high-accuracy drilling tasks on drilling machines and boring mills Precision execution, self-tightening Hardened wear parts for long life Clamping range 0–10 mm, suitable for B12 Designed for right-hand rotation, high speeds Improved hole accuracy and reduced rework The precision variant of this quick-change drill chuck delivers consistent clamping force and reduced run-out, which leads to repeatable hole tolerances and fewer secondary operations. The self-tightening mechanism maintains grip during rotation, so set-up time is reduced and machining stability is improved. For workshops and toolrooms that prioritise dimensional accuracy, this chuck provides measurable benefits in throughput and part quality. Longer service life and lower maintenance demands All wear parts are hardened, and the chuck features permanent, automatic re-tensioning to compensate for gradual wear. These design choices extend maintenance intervals and reduce spare-part turnover, translating into lower life-cycle costs. The durable construction is particularly advantageous where frequent tool changes and continuous operation are required, as the chuck resists typical wear mechanisms found in demanding production environments. Fast changes, simple machine integration With a B12 taper mount and a clamping range of 0–10 mm, the chuck integrates cleanly into standard drilling spindles and toolholders. The compact outer diameter facilitates accessibility in confined setups while the quick-change capability shortens tool-change cycles. Clear, measurable specifications ensure straightforward compatibility checks during machine planning and retrofit projects. Safe operation at production speeds Designed for right-hand rotation and optimised for high-speed use, this precision chuck supports reliable clamping during demanding runs on drill presses and boring mills. The combination of accurate centring and the self-acting tension system reduces the risk of slippage under load, helping to maintain process reliability and operator confidence during continuous production. Choose the RÖHM Spiro precision quick-change drill chuck for demanding, high-speed drilling operations and contact Metav Werkzeuge for ordering or technical consultation: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 4000832068NW Label: Schnellspannbohrfutter Spiro Spann-Ø 0-10mm B 12 f.Re.-Lauf RÖHM Product type: Quick-change drill chuck Brand: RÖHM Mount: B12 Clamping range: 0–10 mm Rotation: Right-hand rotation Outer diameter: 43 mm Packaging unit: 1 Key figures Clamping range: 0–10 mm Outer diameter: 43 mm Mount: B12 SKU: 4000832068NW Special features Precision execution Self-tightening mechanism All wear parts hardened Permanent automatic re-tensioning Suitable for high speeds and accuracy work With taper mount Designed for right-hand rotation FAQ What clamping range does the chuck cover? The chuck offers a 0–10 mm clamping range suitable for small-diameter tooling and drill bits. How is the chuck mounted to the machine? Mounting is via a B12 taper; the B12 interface ensures direct compatibility with machines equipped for this mount type. Is the chuck suitable for high-speed drilling? Yes, the precision design and self-tightening feature make the chuck suitable for high-speed operation while maintaining clamping stability. Are the wear parts replaceable or hardened? All wear parts are hardened to extend service life, and the design allows for maintenance and parts replacement when required. Which rotation direction is supported? This chuck is designed for right-hand rotation, matching the standard spindle direction of many drilling machines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Quick-Change Drill Chuck 0.5–10mm Capacity Self-Clamping, B16 Shank, Right-Hand - ALBRECHT
Benefit from secure, repeatable toolholding and quick bit changes through the combination of a self‑clamping mechanism, maximum clamping force and a precise B16 taper. Order the chuck directly via Metav Werkzeuge or consult our specialists for compatibility advice. SBF quick‑change drill chuck by ALBRECHT — 0.5–10 mm, B16 taper, right‑hand rotation The SBF quick‑change drill chuck is a self‑clamping, high‑precision chuck for B16 taper spindles designed for continuous, right‑hand rotation applications Self‑clamping design for secure toolholding Maximal clamping force for reliable operation B16 taper with high runout accuracy Replaceable hardened wear parts for longevity Secure, repeatable toolholding for demanding production The SBF quick‑change drill chuck delivers a self‑clamping action that converts tightening into consistent axial and radial grip, providing maximum clamping force for reliable machining cycles. This design reduces the need for frequent retuning of tools and supports a stable spindle load under continuous use. The combination of high clamping power and highest runout accuracy improves hole quality and repeatability, which is critical in series production and precision workshops. By favouring technical stability over ad hoc adjustments, process reliability and throughput are improved. Fast changeover and precise fit for B16 spindles With a clamping range of 0.5–10 mm and a B16 taper mounting, the chuck enables rapid bit replacement while ensuring concentricity at the spindle interface. The compact 43 mm outer diameter and configuration for right‑hand rotation make it suitable for conventional drill heads and many light‑duty CNC spindles requiring a secure, compact clamping solution. Reduced changeover time translates into lower setup downtime and more productive machining hours per shift, supporting a measurable efficiency gain across small‑batch and repeat production. Built for longevity and straightforward maintenance All wear components are hardened, ground and replaceable, which simplifies service and extends working life under heavy duty cycles. The chuck’s construction for high continuous loading means fewer unplanned stoppages and a lower cost of ownership over time. For operations seeking predictable maintenance intervals, the modularity of the wear parts supports fast on‑bench servicing. Backed by Metav Werkzeuge’s distribution and technical knowledge, this chuck is positioned as a dependable toolholder for workshops and light industrial use where uptime and precision matter. Contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for detailed compatibility checks and procurement support for the ALBRECHT SBF quick‑change drill chuck Technical data Article number: 4120167208NW Manufacturer: ALBRECHT Product type: Schnellspannbohrfutter Facts Clamping range: 0.5–10 mm Outer diameter: 43 mm Mounting: B16 taper Packaging unit: 1 Special features Self‑clamping mechanism Maximum clamping force For right‑hand rotation Designed for high continuous loads All wear parts hardened, ground and replaceable Highest runout accuracy FAQ What clamping range does the chuck cover? The chuck covers a clamping range of 0.5–10 mm, suitable for small to medium twist drills and tool shanks. Is the chuck suitable for B16 taper spindles? Yes — the ALBRECHT SBF quick‑change drill chuck is supplied with a B16 taper mounting for direct fitment to compatible spindles. Can worn components be replaced on site? Worn parts are hardened, ground and replaceable, allowing straightforward maintenance and part exchange to restore original performance. Is the chuck intended for continuous, heavy use? The design specifies suitability for high continuous loading and combines robust construction with maximum clamping force for reliable operation in demanding workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Quick-Change Drill Chuck 1-13mm Self-Tightening Light Duty B12 Cone Mount Right-Hand - RÖHM
Data inconsistency: the manufacturer "RÖHM" is not listed in the provided manufacturer overview; unable to generate the product description. This issue arises when the necessary reference data, such as the manufacturer details, is incomplete or missing from the database or overview being used. Without the inclusion of "RÖHM" in the manufacturer overview, it becomes impossible to accurately create or generate a product description that aligns with the required standards or expectations. Ensuring that all relevant manufacturers are properly listed and accounted for in the database is crucial to avoid such inconsistencies and to maintain the accuracy and reliability of the generated product descriptions.
150mm Quick-Change Drill Chuck 1.5–13mm, 1/2”‑20 Thread, Right/Left Rotation - RÖHM
Combining a robust metal housing with a 1.5–13 mm keyless clamping range and a 1/2"‑20 mount, this quick-change chuck delivers dependable operation for cordless and mains drills; order the EXTRA80-RV directly via Metav Werkzeuge or consult the advisors for application guidance. EXTRA80-RV keyless quick-change chuck by RÖHM – 1.5–13 mm, 1/2"‑20 The EXTRA80-RV is a keyless quick-change chuck engineered for general workshop and industrial use, offering radial locking and compatibility with both cordless drills and mains machines. Metal housing with radial lock Keyless clamping 1.5–13 mm Suitable for cordless and mains drills Carbide jaw faces and dust protection Robust construction for consistent clamping and long service life The chuck combines a metal housing and a radial locking mechanism to provide stable, repeatable clamping under varying loads. The 1.5–13 mm clamping range covers the most common drill shank sizes, while the 1/2"‑20 mounting thread ensures compatibility with a wide range of drill spindles. Thanks to the solid construction, users benefit from reduced runout and reliable grip, which contributes to improved hole quality and less time spent re‑setting tools. This results in a measurable increase in operational efficiency, particularly where frequent bit changes are required. Versatile operation for forward and reverse applications Designed for both right- and left-hand rotation, this chuck suits applications that demand reversing, such as certain screwdriving or tapping setups. It is described as impact-drill resistant, making it appropriate for use with percussion-capable mains drills and most cordless drill/drivers that include hammer settings. The quick‑change, keyless design allows rapid bit swaps without tools, maintaining workflow momentum and reducing downtime. This functional versatility supports a broad range of workshop tasks from light assembly to routine drilling operations. Low maintenance and durable contact surfaces The chuck features carbide jaw faces to resist wear where the jaws contact the tool shank, and an integrated dust protection element to reduce contamination from chips and debris. It is through-drilled, enabling clearance for long drill bits or for coolant/air flow in certain setups. The modest external diameter (outer diameter 42.7 mm) gives a compact footprint at the tool nose, improving access in confined spaces. These design choices reduce the frequency of maintenance and prolong the service life of both the chuck and the cutting tools it holds. Practical benefits for workshop and industrial use As a quick-change chuck with radial lock and carbide‑faced jaws, the EXTRA80-RV combines ease of use with industrial robustness. Its suitability for cordless and mains equipment supports flexible tool inventories and reduces the need for multiple chucks. For operations that require swift bit changes and reliable clamping under reversing conditions, this chuck delivers a clear productivity advantage. The compact design also aids precision work close to workpiece fixtures or in tight assemblies, making it a pragmatic choice for technicians and maintenance professionals alike. For dependable clamping with RÖHM quality and fast delivery from Emmerich, contact Metav Werkzeuge to discuss the EXTRA80-RV and its application-specific fit; our technical advisors provide clear guidance and supply direct from stock. Technical Data Article number: 4000832112NW Type: EXTRA80-RV Brand: RÖHM Mount: 1/2” - 20 Clamping range: 1.5–13 mm Outer diameter: 42.7 mm Rotation: Right and left rotation Packaging unit: 1 Facts Clamping range: 1.5–13 mm Mount thread: 1/2"‑20 Outer diameter: 42.7 mm Packaging unit: 1 Special features Metal housing Radial lock For cordless drills and screwdrivers Mains drills with self-acting compensation Impact-drill resistant Dust protection Through-drilled Jaw faces of the jaws made of carbide Suitable for right- and left-hand rotation FAQ Is this chuck compatible with impact‑capable drills? The EXTRA80-RV from RÖHM is specified as impact-drill resistant and is intended for use with both cordless and mains drills; compatibility with high‑torque impact drivers should be verified against the specific tool manufacturer’s guidelines. Does the chuck require a key for tightening? No, the EXTRA80-RV is a keyless quick-change chuck, allowing tool-free bit changes within the 1.5–13 mm range for faster workflow and fewer accessories. How is the chuck mounted to a drill spindle? Mounting is by a 1/2"‑20 threaded connection; secure the chuck to the spindle according to the drill manufacturer’s instructions to ensure correct seating and safe operation (SKU 4000832112NW). Can the chuck be used in reversing applications? Yes, the chuck supports right‑ and left‑hand rotation and is designed to retain clamping reliability when the drill is run in both directions. What maintenance does the chuck need? The chuck benefits from occasional cleaning and light lubrication of the jaws and bore; the carbide jaw faces and dust protection reduce wear and contamination, extending service intervals for workshop use. Manufacturer: RÖHM; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Quick-Change Drill Chuck 3-16mm Self-Clamping MK4 For Right-Hand Rotation, 56mm OD - ALBRECHT
Take advantage of the compact design and self-tightening SBF-plus mechanism to improve drilling stability and reduce rework; its MK4 mounting and 3–16 mm clamping range make it a practical choice for workshop spindles — order the ALBRECHT SBF-plus directly via Metav Werkzeuge or consult our specialists for compatibility advice. ALBRECHT SBF-plus quick-change drill chuck (3–16 mm, MK4, right-hand rotation) The ALBRECHT SBF-plus is a self-tightening quick-change drill chuck with an MK4 shank, designed for precise, right-hand rotation drilling in general workshop and industrial applications. Self-tightening SBF-plus design Clamping range 3–16 mm MK4 shank with integrated Morse taper Compact build for high runout accuracy Precision and productivity through compact, self-tightening engineering The SBF-plus model delivers a noticeable improvement in drilling consistency thanks to its self-tightening mechanism and compact design, which together reduce axial play and vibration. The result is high runout accuracy, fewer rejects and less reworking, which directly contributes to more efficient production cycles. Because the chuck secures twist drills and reamers evenly across the 3–16 mm clamping range, machining operations remain stable even at higher speeds, translating into reliable hole quality and repeatability. Secure mounting and straightforward fitting for workshop spindles Fitted with an MK4 shank that incorporates an integrated Morse taper, this chuck establishes a secure spindle interface that minimises slippage and improves torque transfer. The unit’s single-piece construction—where chuck and shank effectively form one assembly—simplifies installation and reduces alignment variables during setup. The compact outer diameter of 56 mm keeps the tool envelope small, supporting access in confined workspaces while maintaining the mechanical rigidity expected in professional settings. Designed for right-hand rotation, the mounting is optimised for standard drilling spindle directions. Operational benefits, handling and maintenance The quick-change concept of the SBF-plus reduces tool-change times and supports steady workflow, while the self-tightening action improves safety under load by maintaining clamping force during operation. Routine upkeep is straightforward: periodic inspection and light lubrication where recommended will sustain the chuck’s performance without complex service interventions. As a practical workshop solution, the chuck balances usability with robust engineering, offering dependable performance for daily drilling tasks and serial production runs. For secure, precision drilling with the ALBRECHT SBF-plus, choose Metav Werkzeuge for dependable supply and technical guidance — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to confirm fitment and place an order Technical data Article number: 4000832534NW Product type: Quick-change drill chuck (SBF-plus) Brand: ALBRECHT Mounting: MK4 Facts Clamping range: 3–16 mm Outer diameter: 56 mm Rotation direction: right-hand rotation Special features Integrated Morse taper in shank Self-tightening mechanism Chuck and shank form a single unit Compact construction for improved runout accuracy FAQ What clamping range does the chuck cover? The ALBRECHT SBF-plus covers a 3–16 mm clamping range suitable for most small to medium twist drills and reamers. How is the chuck mounted to the spindle? Mounting is via an MK4 shank with an integrated Morse taper, ensuring secure seating in compatible spindles. Is this chuck suitable for left-hand rotation machines? The SBF-plus is specified for right-hand rotation only and is not designed for continuous left-hand use. What maintenance does the chuck require to keep runout low? Regular inspection, light lubrication at recommended intervals and checking for wear will maintain the chuck’s high runout accuracy and reliable clamping. Can the chuck be used for reaming as well as drilling? Yes, the 3–16 mm clamping range and secure self-tightening action make the chuck appropriate for reaming and other common holemaking tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Quick-Change Drill Chuck Supra S Self-Clamping Light-Duty 3–16mm, B18 For Right-Hand Rotation - RÖHM
The combination of self‑tightening clamping, a 3–16 mm capacity and a B18 taper ensures fast, reliable bit changes and secure operation in hand‑held drilling applications; order the Supra S quick‑action drill chuck via Metav Werkzeuge or request expert advice. Supra S keyless drill chuck (B18 taper) by RÖHM — 3–16 mm, self‑tightening The Supra S keyless drill chuck for light‑duty, hand‑held machines provides secure, self‑tightening clamping on a B18 taper for right‑hand rotation. Self‑tightening for secure clamping Clamping range 3–16 mm B18 taper mount for quick fitting Designed for right‑hand rotation Secure clamping that reduces slippage and downtime The chuck's self‑tightening mechanism converts spindle torque into a firmer grip on the tool shank, improving retention during drilling. With a 3–16 mm clamping range, the unit accommodates common twist drills and driver bits, reducing the need for frequent tool swaps. This results in fewer stoppages for re‑clamping and a smoother workflow for technicians needing reliable bit fixation in light‑duty tasks. Quick changes with a B18 taper for faster setup Fitted with a B18 taper, the chuck enables fast mounting and removal on compatible spindles, shortening machine setup times. The 46 mm outer diameter offers a compact footprint while maintaining stability, which benefits operations where accessibility is limited. For shops prioritising uptime, the design offers a practical balance between swift tool changes and consistent concentricity. Optimised for portable use and right‑hand rotation Engineered as a light‑duty version for hand‑held machines, the chuck is tailored to the demands of portable drilling applications. The specified right‑hand rotation ensures the self‑tightening action functions as intended during standard drilling operations. The quick‑action concept eliminates the need for a key, simplifying handling and supporting faster, safer bit replacement in service and maintenance environments. Practical advantages for workshops and maintenance teams The compact, robust design suits routine workshop tasks and on‑site maintenance where speed and reliability matter. The chuck's construction focuses on consistent performance with common tool sizes, making it a useful addition to general clamping toolkits. Backed by RÖHM’s manufacturing standards and supplied via Metav Werkzeuge, it aligns with professional expectations for repeatable results in daily operations. For secure, fast clamping choose the RÖHM Supra S keyless drill chuck and contact Metav Werkzeuge in Emmerich for tailored advice and reliable delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000832205NW Manufacturer: RÖHM Product type: keyless drill chuck Model: Supra S Dimensions & Performance Clamping range: 3–16 mm Outer diameter: 46 mm Taper mount: B 18 Packaging unit: 1 Designs / Special features Self‑tightening Light‑duty version For hand‑held machines Right‑hand rotation FAQ Is this chuck suitable for hand‑held drills? The Supra S keyless drill chuck is specified as a light‑duty unit for hand‑held machines and is suitable for portable drilling and routine maintenance work. What is the clamping range of the chuck? The chuck accepts tool shanks from 3–16 mm, covering common twist drills and driver bits. Which spindle mounting does it use? Mounting is via a B18 taper, enabling quick fitting on compatible spindles. Can the chuck be used with left‑hand rotation? No, the chuck is designed for right‑hand rotation; the self‑tightening action is intended for that direction. What is the article number for ordering? The article number is 4000832205NW, listed under the RÖHM Supra S keyless drill chuck. Manufacturer: RÖHM; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19mm 0.2-1.5mm Quick-Change Drill Chuck B6 Self-Clamping High Runout Accuracy, Hardened Replaceable Parts - ALBRECHT
Benefit from the combination of self‑centring clamping, a 0.2–1.5 mm clamping range and hardened, replaceable wear parts to secure consistent high‑precision performance; for procurement or technical queries consult Metav Werkzeuge. ALBRECHT SBF quick‑change drill chuck – 0.2–1.5 mm, B6 taper, right‑hand rotation A ALBRECHT SBF quick‑change drill chuck engineered for B6 taper spindles with right‑hand rotation, ideal for precision micro‑drilling and high‑repeatability applications. Self‑centring spindle for accurate runout Clamping range 0.2–1.5 mm Hardened, ground and replaceable wear parts B6 taper for secure spindle mounting Consistent accuracy for micro‑drilling tasks The ALBRECHT SBF quick‑change drill chuck offers a self‑centring mechanism that ensures reliably low axial and radial deviation when clamping small‑diameter tools. With a clamping range 0.2–1.5 mm, the chuck is tailored to micro‑drills and tiny end mills; this narrow range reduces slippage and improves concentricity. High clamping force minimises chatter and tool vibration, which directly benefits hole quality and repeatability in series production. Runout is a key parameter for small diameters: lower runout accuracy means longer tool life and fewer rejected parts. Durable, serviceable construction for lower downtime Built for sustained use under heavy demands, this chuck features hardened and ground components and replaceable wear parts. Such a construction reduces the need for whole‑unit replacements and enables predictable maintenance cycles. The case‑hardening and grinding of contact surfaces maintain precise seating between the jaws and body, preserving clamping performance over time. For workshops aiming to keep spindle uptime high, the ability to exchange wear items quickly translates into less production interruption and reduced total cost of ownership. Straightforward integration into precision workflows The chuck mounts via a B6 taper, providing a compact and secure connection to compatible spindles, and presents an outer diameter 19 mm for tight‑space installations. Designed for right‑hand rotation, it aligns with standard spindle directions in most machining setups. Its quick‑change nature shortens tool‑change cycles and supports higher throughput in small‑part manufacturing. Whether used in micro‑drilling, PCB machining or fine mechanical fabrication, this chuck simplifies tool handling and helps maintain process stability across repeated cycles. Contact Metav Werkzeuge for spindle compatibility checks and to arrange supply of ALBRECHT SBF quick‑change drill chucks Technical data Article number: 4120167201NW Brand: ALBRECHT Product type: Quick‑change drill chuck Type designation: SBF Packaging unit: 1 Core data Clamping range: 0.2–1.5 mm Outer diameter: 19 mm Taper: B6 Rotation direction: Right‑hand Special features Self‑centring operation Maximum clamping force With taper mounting Built for high continuous stress with top runout accuracy All wear parts case hardened, ground and replaceable Designed for right‑hand rotation FAQ What clamping range does the chuck cover? The ALBRECHT SBF quick‑change drill chuck covers a 0.2–1.5 mm clamping range suitable for micro‑drills and similar small tooling. Is the chuck self‑centring? Yes, the chuck is self‑centring, which promotes low runout and consistent concentricity when clamping small‑diameter tools. Can worn parts be replaced? Worn components are replaceable; all wear parts are case hardened and ground to allow targeted servicing without replacing the entire chuck. Which spindle taper is required? The unit mounts on a B6 taper, providing a compact, secure interface for compatible spindles. Is the chuck suitable for continuous operation under high load? The chuck is designed for high continuous stress and offers maximum clamping force with high runout accuracy to support demanding production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
24mm Schnellspannbohrfutter Spann-Ø 0,2-3mm selbstspannend, für Rechtslauf - ALBRECHT
Schnellspannbohrfutter SBF Spann-Ø 0,2-3mm B10 Rechtslauf – ALBRECHT Schnellspannbohrfutter SBF für präzise Bohrungen mit Kegelaufnahme B10, ausgelegt für Rechtslaufbetrieb und feinjustierten Spannbereich Präzise Spann-Ø 0,2–3 mm Kegelaufnahme B10 für sichere Kraftübertragung Selbstspannend mit hoher Spannkraft Einsatzgehärtete, geschliffene Verschleißteile Optimiert für höchste Rundlaufgenauigkeit Hohe Effizienz durch gezielte Spannleistung Das Schnellspannbohrfutter überzeugt durch maximale Spannkraft bei sehr kleinem Spannbereich, was besonders feine Bohrungen stabil ermöglicht. Die Kombination aus selbstspannender Mechanik und der Kegelaufnahme B10 sorgt für direkte Kraftübertragung und reduziert Werkzeugspiel. Für Fertigungsprozesse bedeutet das: weniger Ausschuss, konstante Bohrqualität und geringere Rüstzeiten. Anwender profitieren unmittelbar von der höheren Prozesssicherheit und planbaren Produktionszyklen. Langlebigkeit und Wartungsfreundlichkeit für den Werkstattalltag Durch eingesetzte einsatzgehärtete und geschliffene Verschleißteile ist die Lebensdauer deutlich erhöht; Bauteile sind austauschbar, was Reparaturzeiten verkürzt. Die robuste Ausführung schützt vor Verformung bei Dauerbeanspruchung und erhält die Rundlaufgenauigkeit über lange Laufzeiten. Dadurch reduzieren sich Instandhaltungsaufwand und Betriebskosten, was besonders in mittelständischen Betrieben den laufenden Betrieb wirtschaftlicher macht. Anwendungsfelder und Zielgruppe Das Produkt ist ausgelegt für präzise Zerspanungsaufgaben an Dreh- oder Bohrmaschinen mit B10-Aufnahme und Rechtslauf. Typische Anwender sind Werkzeugmacher, Feinmechaniker und Produktionsbetriebe, die hohe Genauigkeit bei kleinen Durchmessern verlangen. Das Bohrfutter eignet sich für Serienfertigung ebenso wie für Einzelteile mit hohen Qualitätsanforderungen. Die einfache Montage und Austauschbarkeit der Teile macht es attraktiv für Werkstätten mit begrenzter Stillstandszeit. Technische Vorteile, kurz erklärt Die Kegelaufnahme garantiert axiale und radiale Stabilität; der enge Spannbereich erlaubt sichere Fassung von Feinstbohrern. Rechtslauf als spezifizierte Drehrichtung vermeidet Missverständnisse beim Einsatz. Solche Merkmale sind besonders relevant, wenn höchste Präzision bei kleinen Bohrdurchmessern gefordert wird. Für präzise Kleinstbohrungen empfiehlt sich das Schnellspannbohrfutter SBF von ALBRECHT – Bestellungen und technische Beratung über Metav Werkzeuge GmbH per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Leistungsmerkmale Artikelnummer: 4120167202NW Marke: ALBRECHT Produktart: Schnellspannbohrfutter Typ: SBF Aufnahme: B 10 Verpackungseinheit: 1 Fakten Spannbereich: 0,2–3 mm Außendurchmesser: 24 mm Besonderheiten selbstspannend maximale Spannkraft mit Kegelaufnahme B10 (Kegelaufnahme für präzise Kraftübertragung) für hohe Dauerbeanspruchung bei höchster Rundlaufgenauigkeit alle Verschleißteile sind einsatzgehärtet, geschliffen und austauschbar Drehrichtung: Rechtslauf FAQ Welche Spannbereiche deckt das Schnellspannbohrfutter ab? Das Schnellspannbohrfutter SBF von ALBRECHT deckt einen Spannbereich von 0,2–3 mm ab und eignet sich damit besonders für Feinstbohrer und präzise Kleinstbohrungen. Welche Aufnahme ist notwendig für die Montage? Für die Montage wird eine B10-Kegelaufnahme benötigt. Die Kegelaufnahme gewährleistet sichere Kraftübertragung und stabilen Rundlauf. Sind Ersatzteile verfügbar und austauschbar? Ja, alle Verschleißteile des ALBRECHT Schnellspannbohrfutters sind einsatzgehärtet, geschliffen und austauschbar, was die Instandhaltung vereinfacht. Für welche Drehrichtung ist das Bohrfutter ausgelegt? Das Schnellspannbohrfutter ist für Rechtslauf ausgelegt und entsprechend gekennzeichnet. Für welche Anwendergruppen ist das Produkt besonders geeignet? Das ALBRECHT Schnellspannbohrfutter richtet sich an Werkzeugmacher, Feinmechaniker und Produktionsbetriebe, die bei kleinen Bohrdurchmessern höchste Präzision verlangen. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3-16mm Precision Self-Tightening Keyless Drill Chuck B18, Hardened Components - RÖHM
Take advantage of the combination of accuracy-grade construction, self-tightening operation and hardened wear parts for reliable, high-speed drilling and sustained concentricity in production. Order the RÖHM component directly via Metav Werkzeuge or ask the consultants for compatibility advice for specific machines. RÖHM Spiro keyless drill chuck (B18, 3–16 mm clamping range) The RÖHM Spiro keyless drill chuck is an accuracy-grade, self-tightening chuck designed for high-speed and precision drilling on drill presses and drilling machines. Accuracy execution for precision work Self-tightening with constant re-tension Hardened wear parts for extended service life B18 taper, suitable for right-hand rotation Precision and reliability for production work The accuracy-grade design delivers consistent concentricity, making this chuck a dependable choice for tasks that demand tight tolerances. The combination of a 3–16 mm clamping range and a compact outer diameter of 55 mm supports versatile tooling without compromising stability. The integrated B18 taper provides a secure mounting to standard spindles, while the right-hand rotation configuration suits typical drilling stations. This results in reduced rework and a smoother workflow in serial production. Low maintenance and high operational uptime Equipped with hardened wear parts and a continuous automatic re-tension mechanism, the chuck sustains clamping force under load and at elevated speeds. The self-tightening action increases grip security during operation, lowering the risk of tool slippage and improving safety. For maintenance planning, the hardened components mean longer intervals between part replacement and predictable life cycles, which supports efficient machine scheduling and cost forecasting. Practical benefits for workshop and industrial use Compact yet robust, the chuck is tailored for precision drilling tasks on drill presses, radial drilling machines and similar equipment. The small footprint and 55 mm outer diameter allow use on machines with limited spindle clearance, while still accepting a broad range of drill shank sizes. For operations prioritising both speed and accuracy, the combination of self-tightening behaviour and hardened components provides a reliable solution that minimises downtime and maintains hole quality across batches. For tailored technical advice on the RÖHM Spiro keyless drill chuck or to arrange supply through Metav Werkzeuge from Emmerich, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to confirm machine compatibility and delivery options. Technical data Article number: 4000832071NW Product type: Keyless drill chuck Brand: RÖHM Facts Clamping range: 3–16 mm Outer diameter: 55 mm Mounting: B18 Rotation direction: Right-hand Packaging unit: 1 Special features Accuracy execution Self-tightening (constant automatic re-tension) All wear parts hardened Suitable for high speeds and precision drilling Tapered mounting for secure spindle fit FAQ What clamping range does the chuck cover? The RÖHM Spiro keyless drill chuck accepts tools from 3 to 16 mm and is suitable for a wide range of standard drill shanks. Is the chuck suitable for high-speed drilling? Yes, the design includes hardened wear parts and continual self-tensioning, which makes the chuck appropriate for higher spindle speeds and precision tasks. Which spindle mount does the chuck use? The chuck features a B18 taper mounting for secure attachment to compatible spindles. How does the self-tightening feature benefit production? Self-tightening ensures the clamping force increases under rotation, improving grip security and reducing the likelihood of slippage during automated or manual drilling operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3-16mm Quick-Change Drill Chuck Heavy-Duty B16 Taper, Self-Clamping, Right-Hand - RÖHM
Robust, heavy‑duty construction combined with a self‑tightening mechanism and a B16 taper ensures consistently secure clamping for stationary drilling operations; order direct via Metav Werkzeuge or request specialist advice if required. Supra keyless drill chuck – heavy‑duty, B16 taper, 3–16 mm clamping range (RÖHM) Supra keyless drill chuck is a heavy‑duty, self‑tightening quick‑change chuck designed for stationary machines with a B16 taper and a 3–16 mm clamping range. Heavy‑duty industrial design Self‑tightening for secure clamping B16 taper for stationary machines Clamping range 3–16 mm High throughput and reliable performance for production use The Supra keyless drill chuck combines a heavy‑duty build with a self‑tightening clamping principle to deliver reliable performance in repetitive drilling tasks. The self‑tightening action increases grip force under right‑hand rotation, reducing the risk of slippage during heavy cuts. With a 3–16 mm clamping range, the chuck supports a broad selection of standard drill bits, enabling efficient tool changes without compromising on stability — a clear advantage for production environments where uptime and consistent results matter. Faster tool changes and less downtime on the shop floor A keyless, quick‑change design eliminates the need for a chuck key, allowing operators to swap drill bits rapidly and maintain workflow continuity. The B16 taper mount provides secure axial and radial positioning on compatible stationary spindles, simplifying installation and alignment. For workshops handling frequent bit changes, this reduces non‑productive time and contributes to smoother process sequences. The mechanism is optimised for right‑hand rotation; this characteristic should be matched to the machine’s spindle direction for maximum clamping efficiency. Durable construction and clear compatibility information Built for industrial demands, the chuck’s heavy‑duty specification supports repetitive loads with low maintenance. The compact outer diameter of 51 mm keeps the tool profile slim while maintaining rigidity. Compatibility is straightforward: the mount is a B16 taper, and the clamping range covers 3–16 mm drill shanks, which makes integration into existing drilling stations simple. The result is a robust clamping solution that balances durability with adaptability to common workshop tooling standards. Practical benefits for workshop organisation and quality control Using a reliable quick‑change chuck reduces variation in hole quality and shortens cycle times, which directly benefits production planning and part consistency. The design supports standardised tool inventories, so fewer special adapters are needed. If questions arise about fitting the device to specific machines or optimising torque transfer for particular applications, expert guidance is available to ensure proper integration without compromising safety or accuracy. For secure, heavy‑duty drilling in stationary equipment, choose the RÖHM Supra keyless drill chuck and order via Metav Werkzeuge or request specialist advice at info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 4000832061NW SKU / UID: 4000832061NW Manufacturer: RÖHM Product type: keyless drill chuck Type: Supra Mount: B16 Facts Clamping range: 3–16 mm Outer diameter: 51 mm Packaging unit: 1 Special features Heavy‑duty industrial design Self‑tightening mechanism Mount: B16 taper Rotation: right‑hand Form: heavy industrial execution Label: Schnellspannbohrfutter Supra Spann‑D.3‑16mm B 16 f.Re‑Lauf RÖHM FAQ What clamping range does the chuck support? The chuck supports a clamping range of 3–16 mm, suitable for a wide range of standard drill shanks. Is the chuck suitable for left‑hand rotation? No, the design and self‑tightening action are optimised for right‑hand rotation only. Which spindle mount is required for installation? A B16 taper spindle mount is required; the chuck is designed for direct mounting to B16 tapers on stationary machines. What is the outer diameter of the chuck? The chuck has an outer diameter of 51 mm, offering a compact profile with high rigidity. How does the self‑tightening mechanism benefit workshop use? The self‑tightening mechanism increases gripping force under rotation, reducing slippage and improving hole quality during repetitive drilling with consistent right‑hand spindle rotation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3-16mm Quick-Change Drill Chuck MK3 Self-Clamping For Right-Hand Rotation, 56mm Diameter - ALBRECHT
Take advantage of the combination of self-tightening clamping, an integrated MK3 Morse taper and high runout accuracy for reliable, uninterrupted drilling operations; order the chuck directly via Metav Werkzeuge or consult our specialists for application advice. ALBRECHT SBF-plus quick-change drill chuck (3–16 mm, MK3, right-hand rotation) The SBF-plus quick-change drill chuck supplies self-tightening clamping with an integrated MK3 Morse taper, engineered for precise workshop and industrial drilling in right-hand rotation. Integrated MK3 Morse taper for direct mounting Self-tightening design for reliable clamping High concentricity and compact construction Clamping range 3–16 mm, outer Ø 56 mm Precision that keeps production on track The SBF-plus is designed to maintain a consistent concentricity under load, delivering measurable improvements in hole quality and tool life. Thanks to the self-tightening mechanism and compact architecture, vibration is minimised and cutting forces are transmitted more evenly. These features translate into fewer reworks and a steadier process flow, making the chuck particularly suitable where repeatable accuracy and low runout are essential for serial drilling and reaming tasks. Quick, robust mounting for fast tool changes An MK3 Morse taper is integrated into the shaft so the chuck and shank act as a single unit, simplifying spindle engagement and removal. The direct-mount concept reduces installation time compared with adaptors and keeps the connection rigid for heavy-duty cycles. With a 3–16 mm clamping range and an outer diameter of 56 mm, the unit handles a wide span of common drill sizes while retaining a compact footprint that fits into crowded toolposts and compact drill heads. Operational advantages for everyday reliability Engineered for right-hand rotation, the chuck combines ease of use with secure gripping under torque. The compact design and the fact that the chuck and mounting shank form a single assembly contribute to optimised stability and improved runout performance, which in turn reduces wear on drill bits and machine spindles. For workshop managers this means a tangible reduction in routine interruptions and clearer scheduling of maintenance windows. Built for workshops and production environments This quick-change chuck addresses the needs of machinists, toolroom staff and production engineers who demand dependable performance without excessive complexity. The robust clamping action and proven mechanical layout suit both intermittent repair work and continuous production. When paired with consistent quality control and sensible machining parameters, the unit helps to raise throughput while preserving component accuracy and surface finish standards. For ALBRECHT workshop-grade performance and ordering advice, contact Metav Werkzeuge in Emmerich for tailored recommendations and fast dispatch: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4000832533NW Brand: ALBRECHT Type: SBF-plus Product: quick-change drill chuck Mount: MK3 Numbers / Core technical data Clamping range: 3–16 mm Outer diameter: 56 mm Shank: MK3 Rotation: right-hand Special features Integrated Morse taper Self-tightening clamping mechanism Compact construction for optimal stability High runout accuracy for improved hole quality Chuck and shank form a single unit Designed for right-hand rotation FAQ What clamping range does the chuck cover? The clamping range is 3–16 mm, making the ALBRECHT SBF-plus suitable for a broad spectrum of standard drill diameters. Is the mount compatible with standard taper spindles? Yes, the unit has an integrated MK3 Morse taper, allowing direct mounting into machines that accept MK3 tapers without additional adaptors. Can this chuck cope with continuous production use? The SBF-plus is engineered for robust clamping and high runout accuracy, features that support continuous workshop and light production use when operated within specified machining parameters. Does the chuck support left-hand drilling operations? This version is configured for right-hand rotation; for left-hand applications a different specification would be required. How does the compact design benefit machining results? The compact assembly reduces overhang and vibration, improving stability and extending tool life while delivering better hole quality and repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com