34mm 0.5-6.5mm Quick-Change Drill Chuck B12 Self-Clamping, High Clamping Force, Right-Hand - ALBRECHT
Take advantage of the combination of precise clamping, robust durability and straightforward maintenance for uninterrupted drilling performance; benefit from the self-clamping action, maximum clamping force and fully replaceable, case-hardened wear parts — order the unit directly via Metav Werkzeuge or consult our advisors for specification support. ALBRECHT quick-release drill chuck SBF — B12 shank, 0.5–6.5 mm clamping range The ALBRECHT quick-release drill chuck SBF is a compact, high-precision keyless chuck designed for right-hand rotation drilling tasks where run-out accuracy and sustained clamping performance are required Self-clamping, maximum clamping force Highest run-out accuracy for precision work Replaceable, case-hardened wear parts B12 taper mount for continuous loads Precision clamping for consistent machining results The ALBRECHT unit delivers a defined clamping range 0.5–6.5 mm and is engineered to keep tools concentric under load. The highest run-out accuracy reduces wobble and improves hole quality, which directly lowers rework rates and scrap. The self-clamping mechanism maintains constant grip on the tool shank, so the chuck holds even small-diameter twist drills securely. For production environments where repeatability matters, this results in measurable gains in throughput and part consistency. Built for continuous use and simple upkeep All wear parts are case-hardened, ground and replaceable, so the chuck sustains long service intervals and can be refurbished quickly on the shop floor. The combination of hardened components and solid construction yields maximum clamping force while preserving concentricity over time. Maintenance consists of routine cleaning and occasional replacement of indexed wear items; this approach reduces downtime and keeps machine utilisation high without complex overhaul work. Easy integration and dependable operation in the workshop The B12 taper mount facilitates straightforward fitting to compatible spindles and toolholders, while the design supports machines running in right-hand rotation. With an outer diameter of 34 mm, the chuck offers a compact envelope that suits small- and medium-sized machine spindles where space is limited. Its robust build makes it suitable for extended production runs and for applications requiring secure clamping of slender drill bits and similar cutting tools. Practical handling and safety considerations The quick-release action speeds tool changes compared with keyed chucks, cutting non-productive time at the machine. Because all critical components are accessible and exchangeable, in-house servicing can be performed without specialised tooling. Regular inspection of jaws and the spindle seat is recommended to preserve run-out accuracy and safe operation. The design avoids on-site demonstrations but is supplied with clear spare-part interchangeability to simplify lifecycle management. Choose the ALBRECHT quick-release chuck for reliable precision and easy serviceability — contact Metav Werkzeuge for technical clarification and swift dispatch from Emmerich to your workshop Technical Data Article number: 4120167204NW Manufacturer: ALBRECHT Product type: quick-release drill chuck SBF Mount: B12 shank Rotation: right-hand Facts Clamping range: 0.5–6.5 mm Outer diameter: 34 mm Packaging unit: 1 Special features self-clamping maximum clamping force with taper mount for high continuous load with highest run-out accuracy all wear parts case-hardened, ground and replaceable designed for right-hand rotation FAQ What is the clamping range of this chuck? The ALBRECHT quick-release drill chuck SBF has a clamping range of 0.5–6.5 mm, suitable for small-diameter twist drills and similar tools. Which mount does the chuck use and how compact is it? The unit fits a B12 shank and has an outer diameter of 34 mm, making it compact for small- to medium-sized spindles. Are spare parts available for refurbishment? Yes; the chuck’s wear parts are case-hardened, ground and designed to be replaceable to extend the service life of the ALBRECHT SBF chuck. Is the chuck suitable for continuous production use? The design — including maximum clamping force and case-hardened components — is intended for high continuous load and sustained precision in production settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40,2mm Schnellspannbohrfutter Supra S leichte Ausführung selbstspannend, Innengewinde, Spannbereich 1,0-13mm, Rechtslauf - RÖHM
Supra S Schnellspannbohrfutter von RÖHM Das Supra S Schnellspannbohrfutter ist ein selbstspannendes Bohrfutter für Rechtslauf, ausgelegt auf schnellen Werkzeugwechsel und präzise Bohrung mit einem Spannbereich von 1,0–13 mm. Selbstspannend für schnellen Werkzeugwechsel Spannbereich 1,0–13 mm Aufnahme 1/2” - 20 (Zoll-Gewinde) Leichte Ausführung mit Ø 40,2 mm Außendurchmesser Mit Innengewinde für sichere Montage Schneller Wechsel reduziert Stillstandzeiten und erhöht Durchsatz Die Selbstspannung des Schnellspannbohrfutters ermöglicht einen Werkzeugwechsel ohne zusätzlichen Schlüssel, wodurch Rüstzeiten deutlich reduziert werden. Durch die kompakte, leichte Ausführung bleibt die Belastung der Spindel gering, was die Standzeit von Maschinensystemen erhöht. Anwender profitieren von schneller Verfügbarkeit der Maschine und konstanter Bearbeitungsqualität bei Serien- und Einzelteilen. Kompatibilität und Präzision für vielfältige Anwendungen Dank der Aufnahme 1/2” - 20 ist das Bohrfutter mit vielen Standardspindeln kompatibel; der Spannbereich 1,0–13 mm deckt gängige Werkzeugdurchmesser zuverlässig ab. Die definierte Drehrichtung für Rechtslauf sorgt für sicheren Halt beim Eintauchen in unterschiedlichste Werkstoffe. So bleibt die Bohrbildpräzision erhalten und Nacharbeit wird minimiert. Geeignetes Einsatzfeld und Zielgruppe Das Schnellspannbohrfutter richtet sich an Werkstätten, Instandhaltung und Serienfertigung, die effiziente Rüstprozesse und hohe Wiederholgenauigkeit benötigen. Durch die robuste Auslegung eignet sich das Produkt für Kunden, die eine verlässliche Verbindung zwischen Spindel und Werkzeug fordern, etwa im Metallbau, Maschinenbau oder bei Reparaturarbeiten. Montage, Wartung und langlebige Nutzung Das Vorhandensein eines Innengewindes vereinfacht die Montage und erlaubt eine sichere Befestigung am Spindelkonus. Regelmäßige Reinigung und leichte Schmierung der Spannbacken erhöhen die Lebensdauer des Bohrfutters und sichern konstante Spannkräfte. Durch die geringe Bauform mit 40,2 mm Außendurchmesser bleibt die Zugänglichkeit an engen Werkstücken erhalten. Für professionelle Anwendungen empfiehlt sich das Supra S Schnellspannbohrfutter von RÖHM zur Optimierung von Rüstzeiten und zur Sicherstellung gleichbleibender Bohrergebnisse; Beratung und Lieferung erfolgen direkt über Metav Werkzeuge GmbH, eMail info@metav-werkzeuge.com, Tel +49 2822 7131930 Produktmerkmale Artikelnummer: 4000832216NW Marke: RÖHM Ausführung: Supra S Produktart: Schnellspannbohrfutter Aufnahme: 1/2” - 20 Daten Spannbereich: 1,0-13 mm Außendurchmesser: 40,2 mm Verpackungseinheit: 1 Besonderheiten selbstspannend leichte Ausführung Innengewinde Drehrichtung: Rechtslauf Aufnahme: 1/2” - 20 (Zoll-Gewinde) FAQ Wie groß ist der Spannbereich dieses Bohrfutters? Der Spannbereich des Supra S Schnellspannbohrfutters liegt bei 1,0–13 mm und eignet sich damit für viele Standardbohrer in Werkstatt und Produktion. Ist das Bohrfutter für Rechts- und Linkslauf geeignet? Das Supra S von RÖHM ist für Rechtslauf ausgelegt; die Drehrichtung gewährleistet sichere Spannkräfte bei konventioneller Spindelrichtung. Welche Aufnahme hat das Bohrfutter? Das Bohrfutter verfügt über eine Aufnahme 1/2” - 20, ein gängiges Zoll-Gewinde für die Befestigung an Standardspindeln. Eignet sich das Bohrfutter für den Dauereinsatz in der Serienfertigung? Ja, die leichte Ausführung kombiniert mit der Selbstspannung macht das Supra S Schnellspannbohrfutter robust und effizient für häufige Werkzeugwechsel in der Serienfertigung. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40.2mm Heavy Duty Self‑Clamping Keyless Drill Chuck 0–10mm B12 Right‑Hand - TECWERK
Take advantage of the heavy-duty industrial design, the self-clamping action and the compact B12 taper interface for steady performance in stationary drills; these features combine to reduce interruptions and secure consistent hole quality. Order the TECWERK quick-action drill chuck directly via Metav Werkzeuge or ask our consultants if needed. TECWERK quick-action keyless drill chuck – 0–10 mm, B12 taper, right-hand rotation The TECWERK quick-action keyless drill chuck is a robust, self-clamping chuck designed for stationary machines and right-hand rotation applications, offering a compact B12 taper mount and a versatile 0–10 mm clamping range. Heavy-duty industrial design Self-clamping mechanism Clamping range 0–10 mm B12 taper mount for stationary spindles For right-hand rotation, Ø 40.2 mm Reliable performance for continuous production The chuck's construction focuses on operational reliability: a heavy-duty industrial design paired with a self-clamping mechanism keeps drills securely held under cutting loads, reducing the frequency of retightening and unplanned stops. In practice, this stability translates into steadier cycle times and improved hole repeatability on production lines and in demanding workshop environments. The combination of robust components and straightforward functionality supports longer run times between inspections and fewer process deviations, which is particularly valuable for small-batch and continuous machining alike. Compact interface and wide bit compatibility A 0–10 mm clamping range covers the most commonly used twist drill sizes without the need for multiple adapters, simplifying tool selection and changeover. The B12 taper refers to the taper-style spindle interface that allows direct mounting to compatible spindles, ensuring a secure mechanical fit while keeping the overall assembly compact. With an outside diameter of Ø 40.2 mm, the chuck is suitable where space is limited around the spindle nose. Engineered for right-hand rotation, the internal jaw geometry and gripping action are optimised for conventional forward drilling, promoting reliable bit retention and consistent cutting forces. Low-maintenance design that protects uptime The chuck's straightforward mechanical design minimises wear points and permits routine inspection and lubrication without specialised tools, supporting reduced downtime and predictable maintenance intervals. Quick-action operation speeds up bit changes on both bench and production machines, aiding throughput without sacrificing clamping force. For workshops seeking to integrate or replace spindle-mounted chucks, the compact taper mount and proven mechanical concept simplify compatibility checks and spare-part planning, helping to protect production schedules and maintain process quality. For tailored advice on integrating the TECWERK quick-action keyless drill chuck into existing equipment, contact Metav Werkzeuge in Emmerich for expert consultation and order processing: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 2000832052NW Type: Quick-action keyless drill chuck Brand: TECWERK Mount: B12 taper Clamping range: 0–10 mm Rotation: right-hand Outside diameter: 40.2 mm Version: heavy-duty industrial execution Packaging unit: 1 Facts Clamping range 0–10 mm Outside diameter 40.2 mm Packaging unit 1 Special features Self-clamping mechanism Heavy-duty industrial execution for stationary machines With taper mount Designed for right-hand rotation FAQ What machines is this chuck suitable for? The TECWERK quick-action keyless drill chuck is intended primarily for stationary machines with a compatible B12 taper spindle and is optimised for right-hand rotation setups. What clamping sizes are supported? Clamping is specified as 0–10 mm, covering standard twist drill sizes commonly used in workshop and production environments. How does the B12 taper affect installation? A B12 taper provides a compact taper interface for direct fitting to matching spindles; proper seating and checking for compatibility with the machine spindle are recommended before commissioning. Is the chuck self-tightening under load? Yes, the chuck features a self-clamping mechanism that increases gripping force under forward drilling load, helping to maintain bit retention during operation. What maintenance is required? Routine inspection, light lubrication and checks for jaw wear are recommended to sustain performance; the design allows these tasks to be completed without specialised tools. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40.2mm Heavy Duty Supra Keyless Drill Chuck 0-10mm B16 Right-Hand - RÖHM
Combining heavy-duty construction, a self-tightening clamping system and a secure B16 taper, this chuck ensures reliable, repeatable performance in stationary drilling applications; order directly via Metav Werkzeuge or ask the consultants for tailored advice. Supra quick-change drill chuck — self-tightening heavy-duty chuck, 0–10 mm clamping range, B16 taper (RÖHM) The Supra quick-change drill chuck is a self-tightening, heavy-duty quick-change chuck with a B16 taper, designed for stationary machines running in right-hand rotation. Self-tightening mechanism for secure grip 0–10 mm clamping range for standard drill bits B16 taper for rigid, concentric mounting Heavy-duty design for stationary machines Secure clamping for consistent drilling results The self-tightening mechanism provides a consistently firm hold on cutting tools, reducing slippage and improving concentricity in drilled holes. With a 0–10 mm clamping range, the chuck accommodates most common twist drills and small tools, keeping changeover times short and tool run-out low. The combination of reliable hold and compact construction contributes directly to reduced rework and steadier production rates when machining routine holes. Built for demanding stationary machining Designed as a heavy-duty industrial variant, this chuck suits stationary equipment in workshops and production lines where robustness matters. The B16 taper ensures rigid seating in compatible spindles, while the specified right-hand rotation matches standard drilling directions. The modest outer diameter (40.2 mm) and solid build make the unit easy to integrate without excessive overhang, helping to maintain alignment and minimise vibration during operation. Practical integration, simple maintenance Compatibility with B16 taper spindles and the self-tightening design mean straightforward installation and minimal additional fixturing. The mechanism is serviceable and does not rely on external keying for normal operation, simplifying routine checks and lowering housekeeping time. Where precise terminology helps clarify selection: a B16 taper refers to the machine-side mount standard, and the chuck’s self-tightening action tightens under normal drilling torque, improving security under load. For secure, repeatable drilling performance with a proven RÖHM design, contact Metav Werkzeuge to check spindle fitment and order the Supra quick-change drill chuck (SKU 4000832044NW) for your machine bay; Metav Werkzeuge can advise on compatibility and delivery from Emmerich. Technical data Article number: 4000832044NW SKU: 4000832044NW Product type: Quick-change drill chuck Model: Supra Mounting: B16 Clamping range: 0–10 mm Rotation: right-hand Outer diameter: 40.2 mm Packaging unit: 1 Facts Clamping range: 0–10 mm Outer diameter: 40.2 mm Mounting standard: B16 Packaging unit: 1 Special features Self-tightening mechanism Heavy-duty industrial version for stationary machines Taper mounting (B16) Designed for right-hand rotation FAQ What is the clamping range of this chuck? The RÖHM Supra quick-change drill chuck has a clamping range of 0–10 mm, suitable for most small to medium twist drills. Which machine taper is required for mounting? Mounting requires a B16 taper spindle; the chuck seats directly into a B16 machine taper for rigid support. Is the chuck suitable for high-torque or continuous production use? The heavy-duty construction and self-tightening mechanism make this chuck appropriate for demanding stationary drilling tasks and continuous production environments. How does the self-tightening feature work in practice? Under normal drilling torque the self-tightening mechanism increases grip on the tool shank, reducing the risk of slippage and improving repeatability for the RÖHM Supra quick-change drill chuck. Can this chuck be used on left-hand rotating spindles? This particular version is specified for right-hand rotation; for left-hand applications, an alternative model should be selected. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40.2mm Supra S Quick-Change Drill Chuck 1.0-13mm, Self-Clamping, 3/8”–24 Thread, Right-Hand - RÖHM
Take advantage of the self-tightening, lightweight design and the 1.0–13 mm clamping range for faster tool changes and reduced downtime; enquire about availability and delivery from Metav Werkzeuge for straightforward procurement. RÖHM Supra S keyless drill chuck — self-tightening, 1.0–13 mm The RÖHM Supra S keyless chuck designed for assembly on spindles with a 3/8"-24 mounting thread, optimised for right-hand rotation in light-duty applications Self-tightening lightweight design Clamping range 1.0–13 mm Internal 3/8"-24 mounting thread For right-hand rotation (reliable run) Faster changeovers and steady clamping for daily workshop use The quick-change chuck offers a self-tightening mechanism that reduces the time spent re-clamping and helps maintain concentricity during drilling operations. With a 1.0–13 mm clamping range, the device covers the most common drill sizes used in general metalworking and maintenance tasks, meaning fewer tool swaps and smoother workflows. The lightweight construction contributes to lower spindle load and quicker manual handling without compromising the gripping action, which supports higher process efficiency in repetitive assembly or repair work. Robust mounting and clear mechanical compatibility The chuck mounts on a 3/8"-24 internal thread, making it compatible with a wide range of hand-held and benchtop drills that accept this standard spindle interface. Its designated right-hand rotation ensures full compatibility with conventional drilling directions and prevents unintended loosening under normal use. The compact outer diameter of 40.2 mm allows access in tighter fixtures and keeps the tool profile neat when working in confined spaces. These measurable specifications enable reliable planning for integration into existing toolsets. Practical benefits that reduce operational risk By combining a lightweight form with self-tightening clamping, the chuck minimises operator fatigue during repetitive changes and improves safety by maintaining a secure grip on the tool shank. The simple internal-thread attachment simplifies fitting procedures and reduces assembly time compared with more complex mounting systems. For workshops looking to standardise on robust, easy-to-use clamping elements, this quick-change unit offers repeatable performance and straightforward maintenance, supporting uninterrupted production cycles and dependable daily operation. Contact Metav Werkzeuge for availability and tailored advice on integrating the RÖHM Supra S keyless drill chuck into existing equipment; Metav’s specialists will provide shipment and compatibility details from their Emmerich centre Technical data Article number (SKU): 4000832215NW Type: Supra S Product: Keyless drill chuck Manufacturer: RÖHM Facts Clamping range: 1.0–13 mm Mounting thread: 3/8"-24 Outer diameter: 40.2 mm Packaging unit: 1 Special features Self-tightening Lightweight design Internal thread mounting For right-hand rotation (Rechtslauf) FAQ What clamping sizes does this chuck accept? The chuck accepts drill shanks from 1.0 mm up to 13 mm, providing a versatile clamping range suitable for general metalworking and maintenance tasks. Which spindle interface is required for fitting this chuck? Fitting requires a 3/8"-24 internal thread on the spindle; this is the specified mounting interface for the RÖHM Supra S keyless chuck. Is the chuck suitable for left-hand rotation machines? This model is specified for right-hand rotation; for left-hand applications, a different version or adapter should be considered. How does the self-tightening feature benefit daily use? The self-tightening action reduces the need for frequent re-tightening, improves concentricity under cutting forces and shortens tool-change times during repetitive operations. Can the chuck be used on hand-held drills as well as benchtop machines? Yes; the 3/8"-24 mounting and compact design make it suitable for compatible handheld and benchtop spindles that accept this thread standard. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Quick-Change Drill Chuck Supra SK 0.5–10mm Self‑Closing, Reversible Rotation - RÖHM
Take advantage of the combination of self-tightening clamping, a 0.5–10 mm clamping range and a compact B 12 mounting for secure, efficient drilling in demanding workshop environments; order the Supra SK directly via Metav Werkzeuge or consult the Metav specialists for application advice. Supra SK – Keyless drill chuck with B 12 mounting and 0.5–10 mm clamping range (RÖHM) The Supra SK is a self-tightening, keyless drill chuck designed for rapid tool changes and reliable operation in both right- and left-hand rotation. Self-tightening, rapid tool change Wide clamping range 0.5–10 mm B 12 taper for direct mounting Safety lock for hammer drills Secure grip under vibration for uninterrupted production The self-tightening mechanism ensures a consistently high gripping force even when exposed to reversing torques, reducing the risk of bit slippage during heavy-duty or interrupted drilling cycles. Fitted with a safety lock specifically designed for use with hammer drills, this chuck copes with machines that have a high natural frequency by preventing unintended loosening. The result is fewer re‑clamps, less downtime and improved process reliability in repetitive workflows. Rapid tool changes and wide compatibility save cycle time With a clamping range of 0.5–10 mm and a tool-free release, this quick-release chuck enables fast swapping of twist drills and small machining tools, accelerating set-up and changeover. The B 12 mounting allows direct attachment to compatible spindles, while support for right and left rotation offers flexibility for a variety of machining tasks and special applications. These characteristics contribute to a measurable improvement in throughput where short, frequent tool changes are required. Compact design built for workshop endurance A modest 40 mm outer diameter combines low bulk with robust performance, making the chuck suitable for confined spindles and multi-tool heads where space is limited. The compact construction minimises mass on the spindle without compromising clamping reliability, supporting smoother running and reduced wear. Regular inspection and simple cleaning will maintain function; the design is intended for straightforward maintenance cycles common in production and trade workshops. For process-critical drilling tasks choose the Supra SK for dependable, fast clamping — contact Metav Werkzeuge's specialists at their Emmerich hub for tailored recommendations or to arrange supply via eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 Technical data Article number: 4000832131NW Type: Supra SK Product type: Keyless drill chuck Shank / mounting: B 12 Clamping range: 0.5–10 mm Rotation: Right and left rotation Outer diameter: 40 mm Packaging unit: 1 Brand: RÖHM Facts Clamping range 0.5–10 mm Outer diameter 40 mm Packaging unit 1 Special features Self-tightening mechanism for secure clamping Quick clamping and release for rapid tool changes Safety lock for hammer drills with high natural frequency Suitable for right- and left-hand rotation FAQ What clamping range does this chuck cover? The Supra SK quick-release drill chuck (RÖHM, SKU 4000832131NW) covers a 0.5–10 mm clamping range, making it suitable for small twist drills and similar tooling. Is the chuck suitable for hammer drills? Yes. The chuck includes a safety lock designed for use with hammer drills and machines that exhibit a high natural frequency, reducing the chance of unintended loosening. Which spindle mounting is required? The unit uses a B 12 mounting interface; compatibility requires a corresponding B 12 receptacle on the machine spindle. Can it be used in both rotational directions? The chuck is specified for right and left rotation, so it supports applications requiring reversible spindle direction. How should the chuck be maintained for longest life? Routine cleaning of the jaws and light lubrication of moving parts will keep the chuck functioning reliably; the Supra SK’s compact design facilitates straightforward inspection and maintenance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
42.5mm Quick-Change Drill Chuck 1–10mm, 1/4" Hex Shank, Radial Locking, Hammer-Resistant - RÖHM
Take advantage of the combination of fast bit changes, radial locking for impact resistance and a compact 1–10 mm clamping range to keep assembly and maintenance tasks efficient and reliable; order directly via Metav Werkzeuge or consult their technical advisers for compatibility and delivery. EXTRA80-RV quick-change drill chuck – 1/4” hex shank, 1–10 mm capacity (RÖHM) The EXTRA80-RV is a radial-lock quick-change drill chuck designed for use with impact wrenches and cordless drills, offering secure clamping from 1 to 10 mm for fast tool exchanges 1/4" hex shank for quick tool changes 1–10 mm clamping range Radial locking for impact resistance Carbide jaw facets for secure grip Faster bit changes and uninterrupted workflow Engineered for quick tool swaps, the chuck’s 1/4” hex shank and quick-change design reduce downtime on repetitive fastening and drilling tasks. The compact clamping span of 1–10 mm covers the common range of drill and driver bits used in assembly lines and maintenance benches, meaning fewer tool changes and more continuous operation. The straightforward interface with standard hex-bit holders delivers predictable cycle times and less handling during production runs. Built to take impact tools and reversible operation With a radial locking mechanism and construction rated as radial-impact-proof, this chuck is suitable for heavy-duty applications with impact wrenches and cordless drills. The design supports both right- and left-hand rotation, maintaining grip during reverse operation and rapid direction changes. These attributes translate into reliable performance under fluctuating torque loads and reduce the risk of bit ejection during high-torque tasks. Secure hold and consistent machining results The chuck’s jaw facets are made from carbide, providing a secure grip and improved wear resistance compared with standard steel jaws. That durability helps maintain clamping concentricity over time, which is essential for repeatable hole quality and reduced rework. For operators unfamiliar with technical terms: carbide is a very hard material used for cutting and clamping surfaces to keep their shape and grip under repeated stress. Practical design for demanding workshop environments A plastic housing contributes to weight reduction while the overall build remains impact and percussion-resistant, making the chuck convenient for mobile cordless use without sacrificing robustness. The compact outer diameter and hex shank format make it compatible with standard quick-change adapters and bit holders, simplifying integration into existing tool fleets. The result is a toolholder that balances ease of handling with the durability required in workshops and on-site installations. Choose RÖHM’s EXTRA80-RV for robust, fast-change performance and contact Metav Werkzeuge for tailored advice or to arrange supply via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 8002875400NW Type: EXTRA80-RV Product: Quick-change drill chuck Brand: RÖHM Core specifications Clamping range: 1–10 mm Shank: 1/4" hex Outer diameter: 42.5 mm Packaging unit: 1 UID: 8002875400NW Special features Radial locking mechanism Suitable for impact wrenches and cordless drills Radial-impact-proof / impact-drill-proof Plastic housing Carbide jaw facets for wear resistance Reversible rotation: right and left FAQ Is this chuck compatible with impact drivers? The EXTRA80-RV quick-change drill chuck (RÖHM, SKU 8002875400NW) is designed for use with impact wrenches and cordless drills and is specified as radial-impact-proof. What clamping range does the chuck cover? The chuck accepts shank diameters from 1 to 10 mm, which accommodates most common drill bits and driver bits. How is the chuck secured to the drill? The tool attaches via a 1/4" hex shank for quick and secure connection to standard hex chucks and quick-change adaptors. Are the jaws resistant to wear? Yes, the jaw facets are made from carbide, offering enhanced wear resistance and a consistent grip over repeated use. Can the chuck be used for left-hand rotation? The design supports both right- and left-hand rotation, making it suitable for reversible applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
42.7mm 1-10mm Quick-Change Drill Chuck 3/8”-24 Radial Lock, Through-Hole, Reversible - RÖHM
Take advantage of a robust, metal-bodied quick‑change chuck that combines a 1–10 mm clamping range with a secure radial lock for safe operation in both cordless and mains drills; order via Metav Werkzeuge or request consultancy for application-specific advice. RÖHM EXTRA80-RV — Keyless drill chuck, 1–10 mm clamping, 3/8"-24 mount the RÖHM EXTRA80-RV keyless drill chuck is built for demanding workshop use and universal drill compatibility Metal housing with radial locking Clamping range 1–10 mm Compatible with 3/8"-24 mount Reversible for right and left rotation Carbide-tipped jaw chamfers Faster, tool-free bit changes to keep operations moving A keyless operation enables rapid bit swaps, reducing downtime on repetitive tasks. The 1–10 mm clamping range accommodates common twist‑drill and driver bit shanks, while the through‑drilled body allows use with long shank tools. This combination of features is intended to boost workflow efficiency in production and maintenance environments without additional accessories. Built to withstand workshop conditions and protect investments The chuck is housed in a metal body and fitted with dust protection, which means resilient performance in dusty and rough conditions. The radial locking mechanism secures the bit under reversing loads, and the shock‑resistant design supports both handheld and bench applications. Together, these properties extend service life and reduce the frequency of replacements. Broad compatibility for cordless and corded drills, including reverse operation Fitted with a 3/8"-24 mount, the chuck is suited to a wide range of portable and fixed drills. It is specified for right and left rotation, making it suitable for screwdriving tasks that require reversible drive. Additionally, the unit is described as hammer‑drill resistant, so it can be used in machines that feature impact modes where compatible. Precise clamping to reduce slippage and maintain concentricity The jaw chamfers are made from carbide, providing a durable clamping edge that grips shank material firmly and minimises wear. With an outer diameter of 42.7 mm, the chuck offers a compact footprint while delivering consistent axial alignment. Precise clamping reduces runout and slippage, resulting in cleaner holes and longer tool life. For tailored advice on the RÖHM EXTRA80-RV keyless drill chuck and to arrange supply via Metav Werkzeuge, please contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 8002875403NW Type: EXTRA80-RV Product: Keyless drill chuck Mount: 3/8”-24 UID: 8002875403NW Data Clamping range: 1–10 mm Outer diameter: 42.7 mm Packaging unit: 1 Rotation: Right and left rotation Special features Metal housing Radial locking Compatible with cordless and mains drills with self-adjusting Hammer-drill resistant Dust protection Through-drilled Jaw chamfers with carbide Suitable for right and left rotation FAQ Is the chuck suitable for use with cordless screwdrivers? The RÖHM EXTRA80-RV keyless drill chuck is specified for use with cordless drills and screwdrivers and supports self‑adjusting mains drills as noted in its feature set. Can this chuck be used in hammer‑drill mode? According to the product specification, the chuck is described as hammer‑drill resistant, making it suitable for use on drills that provide impact action when the application allows. What mount standard does the chuck use and which drills will accept it? The chuck uses a 3/8"-24 mount, which is compatible with many handheld and benchtop drills that accept this threaded mounting size. How does the radial locking affect performance during reversing? Radial locking increases the retention force on the bit under reversing loads, improving safety and reducing the risk of slippage when running in both right and left rotation. Are the jaw faces wear‑resistant for repeated clamping? The jaw chamfers are specified as carbide, which provides a hard, wear‑resistant gripping surface designed to maintain clamping performance over extended use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
42.8mm Quick-Change Drill Chuck B 12 1–13mm Capacity Right/Left Rotation, Self-Clamping - RÖHM
Take advantage of a fast, reliable clamping solution that combines self-tightening operation, a 1–13 mm clamping range and a compact B12 mount to keep machining cycles efficient and secure; order the Supra SK quick-change drill chuck directly via Metav Werkzeuge or consult Metav’s advisors for specification support. Supra SK – Self-tightening quick-change drill chuck, 1–13 mm, B12 (RÖHM) The Supra SK is a self-tightening quick-change drill chuck with a B12 mount designed for both right- and left-hand rotation, engineered for workshop and industrial drilling tasks where fast tool changes and reliable clamping are essential Self-tightening quick-change mechanism Clamping range 1–13 mm B12 mount for secure attachment For right- and left-hand rotation Clamping-force safeguard for hammer drills Faster tool changes and consistent clamping for uninterrupted production The self-tightening mechanism provides rapid tool exchange while maintaining a reliable clamping force, which reduces machine downtime and speeds up batch processing. Because the chuck grips automatically during spindle rotation, manual tightening is minimised and repetitive handling is reduced, improving operator efficiency. The integrated clamping-force safeguard is designed to protect the tool retention under the vibration conditions found in high-frequency hammer-drilling, ensuring fewer stoppages and more predictable production cycles. Compact B12 mount and bidirectional rotation for flexible machine use A compact B12 mounting interface makes this chuck suitable for installations where space is limited but secure attachment is required. The capability for right- and left-hand rotation enables reversible drilling and tapping operations without changing the tool holder, expanding the range of tasks that can be completed with a single chuck. With an outer diameter of 42.8 mm, the unit occupies minimal spindle real estate while providing stable support for a wide range of drill sizes. Wide clamping range and industrial application scope The 1–13 mm clamping range accommodates everything from slender pilot drills to general-purpose twist drills, reducing the need for multiple chucks. Built for routine workshop use and tougher industrial environments, the chuck is suitable for handheld and stationary drilling where quick changes and dependable retention matter. Its construction and functional concept favour maintenance-friendly operation, helping to lower the risk of lost tools and the associated production interruptions. For fast, reliable clamping in both workshop and production settings, contact Metav Werkzeuge for expert guidance on the RÖHM Supra SK with B12 mount — call +49 2822 7131930 or email info@metav-werkzeuge.com for specification advice and purchase options Technical data Article number: 4000832133NW Type: Supra SK Product: Quick-change drill chuck Manufacturer: RÖHM Mount: B12 Clamping range: 1–13 mm Rotation direction: Right- and left-hand rotation Outer diameter: 42.8 mm Packaging unit: 1 Additional properties: Self-tightening; clamping-force safeguard for hammer drills with high natural frequency; designed for rapid clamping and release of drill tools Facts Clamping range: 1–13 mm Outer diameter: 42.8 mm Mount: B12 Packaging unit: 1 Special features Self-tightening quick-change mechanism Clamping-force safeguard for high-frequency hammer drilling Suitable for right- and left-hand rotation Compact design for limited spindle space FAQ How large is the clamping range of this chuck? The clamping range is 1–13 mm, allowing the Supra SK quick-change chuck to accept a wide variety of twist drill sizes for versatile workshop use. Is the chuck suitable for reversible drilling operations? Yes, the chuck is specified for right- and left-hand rotation and supports reversible drilling and tapping without swapping the tool holder. Which mount does the chuck use and how compact is it? The unit uses a B12 mount and has an outer diameter of 42.8 mm, making it suitable where a compact, secure attachment is required. Can this chuck cope with hammer-drilling vibrations? The Supra SK includes a clamping-force safeguard specifically intended for hammer drills with a high natural frequency, improving tool retention under vibrational load. What advantages does the self-tightening design offer in production? Self-tightening operation enables faster tool changes and consistent clamping force, which reduces downtime and improves repeatability across production runs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
42.8mm Supra SK Quick-Change Drill Chuck 1–13mm, Self-Clamping, Reversible Rotation - RÖHM
Take advantage of fast, tool‑free chucking together with reliable clamping for a steadier workflow; the self‑tightening mechanism and 1–13 mm range reduce set‑up time and improve repeatability. Order the Supra SK directly via Metav Werkzeuge or consult our specialists for application advice. Supra SK keyless drill chuck — 1–13 mm clamping, B16 mount by RÖHM Supra SK is a self‑tightening keyless drill chuck designed for B16 mounts, enabling rapid tool changes and secure clamping in both right‑ and left‑hand rotation applications. Self‑tightening for fast tool changes Clamping range 1–13 mm B16 mounting taper Suitable for right‑ and left‑hand rotation Reduce set‑up time with dependable clamping The combination of a self‑tightening mechanism and a broad 1–13 mm clamping span significantly reduces changeover time in mixed drilling operations. The chuck grips standard twist drills and short shank tools without a key, which streamlines workflow and limits interruptions during production. With fewer tool changes and faster seating, run‑times become more predictable; the quick tool changes translate into measurable gains in throughput for repeat tasks and small batch runs. Secure performance for reversing and percussive use Constructed for bidirectional spindles, the chuck supports right‑ and left‑hand rotation and incorporates clamping force retention suitable for machines with higher natural frequencies, including percussion‑enabled systems. This feature helps prevent slippage when direction changes or axial impacts occur, maintaining consistent torque transfer to the tool. The B16 interface provides a compact, rigid connection to the spindle, ensuring the chuck remains stable under reversing loads while preserving machining accuracy. Compact design that endures workshop conditions A compact outer diameter of 42.8 mm keeps the toolholder clear in tight set‑ups and allows improved access to confined workpieces. The B16 mounting taper offers a simple, well‑established interface for many drill heads and toolposts. Supplied as a single unit per package, the chuck is straightforward to fit and maintain; periodic cleaning and light lubrication of the spindle interface are sufficient to sustain reliable function. Built for everyday workshop use, the design balances accessibility with robust clamping to support consistent results across general metalworking and maintenance tasks. For secure, fast clamping on B16 spindles choose the RÖHM Supra SK and contact Metav Werkzeuge for procurement or technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 4000832136NW Type: Supra SK Product: Keyless drill chuck Mount: B16 Manufacturer: RÖHM UID: 4000832136NW Data Clamping range: 1–13 mm Outer diameter: 42.8 mm Packaging unit: 1 Special features Self‑spanning, for fast clamping and release Clamping force retention for hammer/percussion drills with high natural frequency Suitable for right‑ and left‑hand rotation (reversible operation) Drehrichtung: for right‑ and left‑hand rotation FAQ Is the chuck compatible with standard B16 spindles? The Supra SK is designed for a B16 mount, so it fits standard B16 interfaces used on many drill heads and toolholders. What tool diameters can the chuck hold? Clamping capacity covers 1–13 mm, enabling use with a wide range of twist drills and small shank tools. Can the chuck be used in reversible drilling operations? Yes, the chuck supports right‑ and left‑hand rotation and includes clamping force retention suitable for reversing spindles. Is the Supra SK suitable for percussion‑capable machines? The chuck features clamping force retention intended to maintain grip under the higher natural frequencies encountered in percussion‑enabled drilling. How many chucks are supplied per package? The product is supplied as a single unit; packaging unit: 1. Hersteller: Manufacturer: RÖHM; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
46mm 3.0-16mm Quick-Change Drill Chuck Self-Tightening With 1/2”–20 Thread, Right-Hand - RÖHM
Take advantage of a secure, self-tightening chuck with a wide 3.0–16 mm clamping range and a standard 1/2"-20 mount for straightforward integration into workshop spindles; the light-duty design keeps handling simple while ensuring reliable bit retention for routine drilling tasks. Order the RÖHM Supra S via Metav Werkzeuge or consult our specialists for suitability checks. RÖHM Supra S Keyless Drill Chuck 3.0–16 mm, 1/2"-20 The RÖHM Supra S is a light-duty, self-tightening keyless drill chuck designed for right-hand rotation and intended for workshop and maintenance drills Self-tightening operation for secure hold Clamping range 3.0–16 mm 1/2"-20 threaded mount Light-duty construction, 46 mm outer diameter Precision hold for consistent drilling results A wide clamping range of 3.0–16 mm enables use with a variety of drill bits and accessories without repeated chuck changes. The self-tightening mechanism increases axial grip as torque rises, which reduces slippage under load and improves hole quality; this technical behaviour makes the chuck particularly effective for repetitive, medium-duty applications. The result is fewer interruptions and a more predictable process flow in everyday workshop operations. Fast installation and spindle compatibility The chuck mounts via a 1/2"-20 internal thread, a common interface for many hand-held and light bench drills, which simplifies retrofitting and reduces downtime when replacing worn or unsuitable chucks. Specified for right-hand rotation, the assembly matches standard drilling directions and avoids unintended reverse loading. Clear interface standards mean compatibility checks are straightforward and integration into existing tooling setups is efficient. Compact form and straightforward maintenance With an outer diameter of 46 mm, the chuck offers a compact footprint that suits confined toolheads and handheld devices while still providing a robust grip surface. The light-duty classification keeps mass low for easier handling and faster bit changes, which benefits frequent tool swaps. Basic care—regular cleaning of the jaws and lubrication of the screw thread—preserves performance and extends service life without complex maintenance procedures. Best uses and application fit Engineered for workshops, maintenance teams and small-scale production environments, this keyless chuck supports common drilling tasks where reliability and quick tool changes matter most. Its design balances convenience and functional grip, making it well suited to repair jobs, assembly work and general fabrication where heavy-duty industrial chucks are not required. The chuck delivers practical benefits for workshop workflows and helps keep operations moving smoothly. Contact Metav Werkzeuge to discuss the RÖHM Supra S for your workshop requirements and arrange delivery; technical advisers are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000832217NW Label: Schnellspannbohrfutter Supra S Spann-D.3,0-16mm 1/2Zoll-20mm f.Re.-Lauf RÖHM Manufacturer: RÖHM Facts Clamping range: 3.0–16 mm Mount: 1/2"-20 (internal thread) Outer diameter: 46 mm Packaging unit: 1 Special features Self-tightening Light-duty version With internal thread For right-hand rotation FAQ What clamping range does the chuck cover? The chuck covers a 3.0–16 mm clamping range, which permits use with a broad selection of common drill bits and small accessories. Is the mount compatible with standard drill spindles? Yes, the chuck uses a 1/2"-20 internal thread mount, making it compatible with many hand-held and light bench spindles that accept this standard. Can this chuck be used on reversible drills? The construction is specified for right-hand rotation; use on reversible machines should respect this direction to ensure the self-tightening behaviour remains effective. How does the self-tightening feature improve performance? The self-tightening action increases jaw grip with applied torque, reducing the risk of slippage and improving drilling consistency during medium-duty tasks. Is the Supra S suitable for heavy industrial use? The Supra S is a light-duty keyless chuck optimised for workshops and maintenance work rather than heavy industrial machining that demands specialised heavy-duty chucks. Manufacturer: RÖHM; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
46mm 3.0-16mm Quick-Change Drill Chuck, Self-Clamping, Internal Thread, Right-Hand - RÖHM
Take advantage of a reliable combination of self-tightening clamping and a broad 3.0–16 mm range for consistent drill performance; the light-duty design and internal 5/8"-16 thread simplify installation and minimise downtime. Order the RÖHM Supra S keyless drill chuck directly via Metav Werkzeuge or ask our consultants if needed. RÖHM Supra S keyless drill chuck — 3.0–16 mm clamping range, 5/8"-16 internal thread, self‑tightening The Supra S keyless drill chuck by RÖHM is a light‑duty, self‑tightening chuck with an internal 5/8"-16 connection designed for clockwise (right‑hand) rotation in machining and drilling applications Self‑tightening for secure clamping Clamping range 3.0–16 mm Internal 5/8"-16 thread for direct mounting Compact design with 46 mm outer diameter Reliable clamping that reduces slippage and rework A self‑tightening mechanism converts torque into axial clamping force so that the drill bit remains secure under load; this reduces the risk of slippage and improves hole quality. With a 3.0–16 mm clamping range, the chuck covers a wide span of common drill sizes, eliminating frequent tool changes. The result is a steadier production flow and fewer interruptions for repositioning, which benefits workshops and light industrial users seeking consistent, measurable results. Easy mounting and assured compatibility with standard spindles Designed with an internal 5/8"-16 thread, the chuck mounts directly to compatible spindles without additional adapters, saving assembly time. The compact 46 mm outer diameter keeps the tool head slim for better access in confined setups. Specified for right‑hand (clockwise) rotation, the unit is optimised for conventional drilling machines and ensures predictable behaviour during operation. Clear technical matching avoids costly ordering errors and shortens machine setup. Light‑duty design for faster tool changes and ergonomic handling The light‑duty construction supports frequent tool changes while keeping handling comfortable for operators. Because the chuck is keyless, tightening and releasing bits can be performed quickly, increasing uptime in serial or workshop tasks. This simplified handling contributes to operational efficiency and a smoother workflow without compromising the essential clamping performance expected in everyday drilling tasks. Contact Metav Werkzeuge for tailored advice on the RÖHM Supra S keyless drill chuck and to arrange fast delivery from our Emmerich warehouse Technical data SKU: 4000832218NW Model: Supra S Product type: Keyless drill chuck Brand: RÖHM Clamping range: 3.0–16 mm Arbor / thread: 5/8"-16 Rotation direction: Right‑hand (clockwise) Version: Light‑duty, self‑tightening, with internal thread Outer diameter: 46 mm Packaging unit: 1 UID: 4000832218NW Numbers / Core technical data Clamping range (mm): 3.0–16 Outer diameter (mm): 46 Arbor thread: 5/8"-16 Packaging unit: 1 Special features / Designs Self‑tightening mechanism Light‑duty execution Internal thread for direct mounting Intended for right‑hand rotation FAQ What drill bit sizes does the chuck accept? The chuck accepts drill shanks within the 3.0–16 mm clamping range; the self‑tightening mechanism secures bits across that span. How is the chuck mounted to a spindle? Mounting is via an internal 5/8"-16 thread, allowing direct attachment to compatible spindles without an adapter. Is this chuck suitable for heavy industrial drilling? The Supra S is a light‑duty and self‑tightening design; it is intended for workshop and lighter industrial applications rather than heavy‑duty machining. Does the chuck support left‑hand rotation? This chuck is specified for right‑hand (clockwise) rotation; use in the opposite direction is not advised. Can the chuck be used without a tightening key? Yes — the keyless configuration provides quick bit changes and relies on the self‑tightening action for secure clamping. Manufacturer: RÖHM; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
46mm Schnellspannbohrfutter Supra S leichte Ausführung selbstspannend für Rechtslauf, Aufnahme B16 - RÖHM
Schnellspannbohrfutter Supra S von RÖHM Schnellspannbohrfutter Supra S – Selbstspannendes Bohrfutter mit B16-Kegelaufnahme für handgeführte Maschinen bei Rechtslauf, ausgelegt auf schnellen Werkzeugwechsel und präzise Bearbeitung von 3–16 mm Bohrern Selbstspannend für schnellen Werkzeugwechsel Spannbereich 3–16 mm Aufnahme B16 mit Kegelaufnahme Geeignet für handgeführte Maschinen und Rechtslauf Außendurchmesser 46 mm Schneller Werkzeugwechsel für produktive Werkstätten Das Schnellspannbohrfutter Supra S reduziert Rüstzeiten durch seine selbstspannende Funktion und ermöglicht so deutlich kürzere Unterbrechungen im Arbeitsablauf. Dank der leichten Ausführung ist das Futter besonders für mobile Einsätze an handgeführten Maschinen geeignet, weil das Gewicht die Handhabung erleichtert. Die Kombination aus schneller Spannmechanik und kompakter Bauform steigert die Produktivität, da Ausfallzeiten beim Wechsel von Bohrern minimiert werden. Präzision im Praxisbetrieb bei variablen Bohrdurchmessern Mit einem Spannbereich 3–16 mm deckt das Futter die gängigsten Bohrerdurchmesser ab und bietet damit Flexibilität für unterschiedliche Anwendungen. Die Aufnahme B16 sorgt für sichere Verbindung zur Maschine, während die Auslegung für Rechtslauf die Kompatibilität mit Standard-Bohrmaschinen gewährleistet. Für Anwender, die wenig Erfahrung mit technischen Begriffen haben: Spannbereich bezeichnet den Bereich der Bohrerdurchmesser, die das Futter aufnehmen kann, und selbstspannend bedeutet, dass das Futter ohne Schlüssel festgezogen werden kann. Kompakte Bauform und robuste Ausführung für den Alltag Die leichte Ausführung mit einem Außendurchmesser 46 mm reduziert die Belastung bei Handarbeiten und verbessert die Balance an der Maschine. Durch die Kegelaufnahme in B16 bleibt die Verbindung stabil, selbst bei hoher Belastung im Rechtslauf. Diese Eigenschaften machen das Futter zu einer praxistauglichen Wahl für Werkstätten, Serviceeinsätze und Montagen, bei denen Ergonomie und Zuverlässigkeit Hand in Hand gehen. Zielgruppe und typische Einsatzbereiche Entwickelt für Handwerk, Montage und Instandhaltung, eignet sich das Supra S besonders für Anwender, die häufig Bohrer wechseln und mobil arbeiten. Typische Einsatzfälle sind Montagearbeiten, mobile Reparaturen und kleinere Fertigungsaufgaben, bei denen schnelle Rüstzeiten und sichere Spannung im Vordergrund stehen. Wer Wert auf einfache Handhabung, Flexibilität im Spannbereich und Kompatibilität mit Standard-Aufnahmen legt, profitiert unmittelbar von den Merkmalen dieses Bohrfutters. Für Anfragen zur Verfügbarkeit oder zur technischen Kompatibilität das Supra S mit B16-Aufnahme bei Metav anfragen und persönliche Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 einholen Produktmerkmale Artikelnummer: 4000832204NW Marke: RÖHM Produktart: Schnellspannbohrfutter Typ: Supra S Aufnahme: B 16 Fakten Spannbereich: 3-16 mm Außendurchmesser: 46 mm Verpackungseinheit: 1 Besonderheiten selbstspannend leichte Ausführung für handgeführte Maschinen mit Kegelaufnahme (B16) Drehrichtung: Rechtslauf FAQ Ist das Bohrfutter wirklich ohne Schlüssel zu spannen? Das Schnellspannbohrfutter Supra S von RÖHM verfügt über eine selbstspannende Mechanik, die einen schnellen und schlüssellosen Werkzeugwechsel ermöglicht und so Rüstzeiten reduziert. Welche Bohrergrößen lassen sich verwenden? Der Spannbereich von 3–16 mm erlaubt die Nutzung eines breiten Spektrums an spiral- und Stufenbohrern; das RÖHM Schnellspannbohrfutter (SKU 4000832204NW) deckt damit die gängigsten Arbeitsfälle ab. An welche Maschinen passt die Aufnahme? Die Aufnahme B16 ist als Kegelaufnahme ausgeführt und eignet sich für Maschinen mit entsprechender B16-Spannaufnahme; das Futter ist für Rechtslauf ausgelegt. Ist das Futter für mobile Einsätze geeignet? Ja, die leichte Ausführung und der kompakte Außendurchmesser von 46 mm machen das Supra S besonders geeignet für handgeführte Maschinen bei Montage- und Servicetätigkeiten. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
46mm Supra Heavy-Duty Keyless Drill Chuck 1–13mm B16 Right-Hand - RÖHM
Benefit from the Supra quick‑change drill chuck’s combination of self‑tightening clamping and a 1–13 mm range for consistent, secure drilling in stationary machines; its B16 taper ensures straightforward integration with compatible spindles. Order the unit via Metav Werkzeuge or contact the technical team for clarification and fitment advice. Supra quick‑change drill chuck – B16 taper, 1–13 mm, RÖHM The Supra quick‑change drill chuck is a heavy‑duty, self‑tightening chuck with a B16 taper, engineered for right‑hand rotation in stationary drilling and machining environments. Self‑tightening, heavy‑duty design B16 taper mount for stationary spindles Clamping range 1–13 mm for versatile tooling Designed for right‑hand rotation Secure clamping for reliable machining results The self‑tightening mechanism delivers a secure grip on twist drills and other shank tools across the 1–13 mm clamping range, reducing slippage and improving concentricity. This feature translates into fewer interrupted cycles and less rework on precision holes, which supports predictable throughput in production settings. The heavy‑duty construction of the chuck also contributes to consistent torque transfer, helping to maintain hole quality even under steady loads. Straightforward mounting and machine compatibility Fitted with a B16 taper mount, the chuck integrates directly with spindles designed for this taper size, enabling rapid installation on compatible stationary machines. The compact 46 mm outer diameter suits confined spindle spaces while keeping the tool close to the workpiece for improved rigidity. Specified for right‑hand rotation, the unit matches standard drilling directions used across many workshop and industrial machines and is identified under the RÖHM brand for recognised engineering pedigree. Robust design built for industrial use Produced in a heavy‑duty industrial version, the chuck is designed to withstand continuous operation in workshop and factory environments. The durable build minimises wear on contact surfaces and supports stable clamping forces during repetitive cycles. For operations that prioritise uptime, the chuck’s straightforward mechanical design reduces the probability of vibration‑induced loosening and contributes to longer service intervals, supporting cost‑effective production runs. Practical operation, handling and benefits The chuck’s quick‑change character shortens tool change times compared with conventional keyed chucks, aiding overall process efficiency. With its self‑tightening action and rugged construction, the device reduces the need for frequent retorquing and simplifies routine checks. For precise fitting and to confirm suitability with specific machines and tooling, Metav’s documentation and technical advisers can provide the necessary compatibility information and clarify installation requirements. For reliable, industrial drilling performance with the RÖHM Supra quick‑change drill chuck (B16 taper, 1–13 mm), contact Metav Werkzeuge to confirm spindle compatibility and arrange procurement — Metav’s technical team will advise on the optimal configuration for stationary machines. Technical data Article number: 4000832060NW SKU / UID: 4000832060NW Product type: Quick‑change drill chuck Brand: RÖHM Form: heavy‑duty industrial version Taper mount: B16 Packaging unit: 1 Dimensions & measurable data Clamping range: 1–13 mm Outer diameter: 46 mm Design & special features Self‑tightening Designed for stationary machines With taper mount For right‑hand rotation Quick‑change capability FAQ What clamping range does the chuck cover? The clamping range is 1–13 mm for the Supra quick‑change drill chuck, giving flexibility for a wide range of small to medium shank tools. Which taper does the chuck use and how does it mount? The unit mounts on a B16 taper; the B16 taper ensures direct, secure fitting to spindles designed for that taper. Is the chuck suitable for continuous industrial use? Yes, the heavy‑duty industrial design makes the Supra quick‑change drill chuck suitable for continuous operation in workshop and factory settings. Which rotation direction is required for operation? The chuck is specified for right‑hand rotation and is intended for machines that run in that direction. How does the self‑tightening feature improve drilling accuracy? The self‑tightening action increases clamping force as torque rises, reducing slippage and helping to maintain concentricity during drilling operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm 1-13mm Quick-Change Drill Chuck MK4 Self‑Clamping Right-Hand, Compact Design - ALBRECHT
Combine compact construction, high runout accuracy and an integral MT4 taper for stable, repeatable drilling operations; benefit from reduced set‑up time and consistent hole quality. Order directly via Metav Werkzeuge or consult the specialists for application advice. SBF-plus quick‑change drill chuck – keyless, 1–13 mm, MT4, ALBRECHT The SBF-plus is a compact quick‑change drill chuck for right‑hand rotation, designed for workshop and light production use with an integral MT4 (Morse taper 4) shank. Clamping range 1–13 mm Integral MT4 Morse taper shank Self‑tightening, compact design High runout accuracy, 50 mm body Stable clamping for consistent production quality The compact chuck delivers reliable clamping across a 1–13 mm range, which reduces rework and increases throughput in repetitive drilling tasks. The self‑tightening mechanism converts applied torque into a firmer grip during right‑hand rotation, ensuring drill bits remain secure under load. For practical understanding: improved clamping and consistent concentricity mean fewer rejected parts and less time spent on alignment, making the tool an efficient choice for workshop environments and small production runs. Compact construction that improves concentricity and rigidity Thanks to the integrated design where the chuck and arbor form a single unit, the assembly minimises offset and enhances stability. The 50 mm outer diameter contributes to a rigid interface that reduces vibration and helps maintain low runout. Low runout (high concentricity) translates directly into cleaner holes and longer tool life for cutting edges. The compact layout also aids access in confined setups, allowing machining close to fixtures without compromising accuracy. Machine compatibility and practical application guidance Fitted with an MT4 (Morse taper 4) shank, this chuck mates with spindles and arbors that accept MT4 tooling. It is configured specifically for right‑hand rotation; the self‑tightening feature relies on this direction to increase clamping force under torque. Compatibility therefore depends on the host machine’s taper and rotation direction. For customers evaluating fitment, the integral MT4 arrangement means straightforward mounting on compatible drill presses and toolholders without additional adaptors. Low‑effort maintenance and trusted supply chain The compact and robust construction reduces the number of wear points, simplifying routine inspection and maintenance. Where periodic checks are required, attention to jaw condition and runout will preserve performance and extend service intervals. Metav’s role as a precision partner ensures consistent supply and technical backup: decades of experience and a wide product range mean suitable accessories and replacement components are readily available for workshop continuity. For tailored advice on integrating the ALBRECHT SBF‑plus into existing machinery or to request a quotation, contact Metav Werkzeuge GmbH at +49 2822 7131930 or info@metav-werkzeuge.com — consultants are available to specify the correct chuck configuration for the application. Technical data Article number: 4000832523NW Brand: ALBRECHT Product type: Quick‑change drill chuck SBF‑plus Specifications Clamping range: 1–13 mm Outer diameter: 50 mm Shank: MT4 (Morse taper 4) Rotation: right‑hand Packaging unit: 1 Special features Integrated Morse taper shank Self‑tightening (for right‑hand rotation) Compact design for optimal stability Chuck and arbor form a single unit FAQ What clamping range does the chuck support? The SBF‑plus quick‑change chuck supports a clamping range of 1–13 mm, suitable for a broad range of standard twist drills. Which shank does this chuck use and how is it mounted? This version uses an MT4 (Morse taper 4) shank; the chuck and shank form an integral unit for direct mounting in compatible MT4 spindles or adaptors. Is the chuck suitable for left‑hand rotation or reverse drilling? No—this chuck is designed for right‑hand rotation; the self‑tightening feature requires clockwise (right‑hand) spindle direction to increase clamping under load. How does the self‑tightening function benefit daily use? Under normal right‑hand drilling, applied torque increases jaw pressure, reducing slippage and improving repeatability, which is particularly beneficial in series production. What dimensional feature supports good runout performance? The compact body and integral arbor, combined with the 50 mm outer diameter, contribute to reduced vibration and improved concentricity for higher runout accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm 1–13mm Quick-Change Drill Chuck B16 Self-Clamping, Maximum Clamping Force, Hardened Replaceable Parts - ALBRECHT
Benefit from a combination of self‑tightening clamping, maximum clamping force and outstanding runout accuracy for reliable drill holding in repetitive machining. Order supply or request advice directly from Metav Werkzeuge for fast delivery and technical guidance. ALBRECHT SBF quick-change drill chuck – 1–13 mm, B16 taper, right‑hand rotation ALBRECHT SBF quick-change drill chuck for secure, self‑tightening clamping of twist drills in workshop and light industrial applications Self‑tightening design for secure grip Clamping range 1–13 mm B16 taper for straightforward mounting Replaceable hardened wear parts Consistent clamping for accurate holemaking The self‑tightening mechanism converts spindle torque into additional clamping force, delivering a maximum clamping force that reduces slippage under load. With a 1–13 mm clamping range, the chuck secures a wide variety of twist drills and short tool shanks, enabling shorter setups and fewer tool changes. Improved holding stability contributes directly to longer cutter life and more consistent hole quality, while the design helps to maintain spindle efficiency during repetitive production runs. Built for durability and fast serviceability Constructed with all wear parts case‑hardened, ground and replaceable, the chuck is engineered for extended service life and straightforward maintenance. The B16 taper mount provides a compact, rigid connection to standard drill spindles, and the modest 50 mm outer diameter keeps the assembly slim for use in tighter fixtures. Replaceable components mean less downtime: worn elements can be exchanged without replacing the entire chuck, improving cost efficiency over many service cycles. Workshop compatibility and precision under rotation Designed for right‑hand rotation, the chuck matches typical drill spindle directions and is optimised for high rotational stability and minimal eccentricity. The combination of precision machining and hardened running surfaces yields excellent runout accuracy, which translates to better concentricity of drilled holes and reduced rework. For operations seeking dependable clamping across mixed tool sizes, this compact, high‑precision chuck supports smoother production workflows and predictable repeatability. For tailored technical advice or to arrange supply from our Emmerich warehouse, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4120167209NW Manufacturer: ALBRECHT Product type: Quick-change drill chuck (SBF) Mounting: B16 Clamping range: 1–13 mm Outer diameter: 50 mm Rotation: Right‑hand Packaging unit: 1 UID: 4120167209NW Key figures Clamping range: 1–13 mm Outer diameter: 50 mm Mounting: B16 taper Packaging unit: 1 Design and special features Self‑tightening Maximum clamping force With taper mount For high durability and highest runout accuracy All wear parts case‑hardened, ground and replaceable For right‑hand rotation FAQ Which drill sizes can be clamped with this chuck? The ALBRECHT SBF quick‑change drill chuck clamps twist drills from 1–13 mm, covering common diameters for general drilling tasks. Is the chuck suitable for heavy‑duty or repetitive use? Yes; the SBF chuck is designed for high durability with case‑hardened, ground, replaceable wear parts, making it well suited to repetitive workshop and light industrial use. How is the chuck mounted to the spindle? Mounting is via a B16 taper, which provides a compact, rigid connection to compatible spindles and tooling interfaces. Does the chuck support left‑hand and right‑hand rotation? This model is specified for right‑hand rotation, optimised for standard spindle direction in drilling applications. What maintenance is recommended to preserve runout accuracy? Regular inspection and replacement of the hardened wear parts as required will help preserve the chuck’s runout accuracy and clamping performance; worn components can be exchanged without replacing the entire unit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm 1–13mm Quick-Change Drill Chuck MK3 Self-Clamping, Right-Hand Rotation - ALBRECHT
Benefit from the compact construction, integrated MK3 Morse taper and self‑tightening clamping for consistently precise drilling. The unitary design of chuck and shank reduces run‑out and simplifies workshop routines. Order the SBF‑plus directly via Metav Werkzeuge or consult our advisors for application advice. SBF-plus Quick-change drill chuck – 1–13 mm clamping, MK3 taper, ALBRECHT The SBF-plus is a quick-change drill chuck with an integrated Morse taper MK3, designed for right‑hand rotation drilling tasks in metalworking and general workshop applications. Integrated MK3 Morse taper Self‑tightening quick‑change action Compact design for high run‑out accuracy 1–13 mm clamping range Faster, more reliable clamping for routine production The quick‑change drill chuck delivers a measurable productivity benefit through its self‑tightening mechanism and compact construction. These features translate into fewer tool changes and reduced setup time, which is particularly valuable in small‑batch production or busy repair shops. The result is a more predictable workflow and reduced rework, driven by the chuck’s ability to hold standard shank drills and bits securely without repeated manual retightening. This means steadier feeds and fewer interruptions during repetitive drilling operations. Secure machine interface via integrated Morse taper MK3 By combining the chuck and shank into one integrated component, the design eliminates an extra connection and therefore minimises sources of misalignment. The MK3 Morse taper provides a secure, repeatable interface to spindles that accept Morse tapers, improving concentricity and reducing vibration under load. For operators this offers a clear benefit: improved hole quality and longer life for cutting tools because the reduced micro‑movement keeps cutting edges engaged consistently with the workpiece. Broad 1–13 mm range to cover common drilling needs A clamping capacity of 1–13 mm accommodates a wide variety of twist drills and small end mills, which helps to reduce the number of specialised chucks or adaptors required in a workshop. The broad range supports quick transitions between diameters without changing the clamping tool, saving time on multi‑size jobs. This versatility is particularly useful for maintenance teams and toolrooms that face varied drilling tasks and require dependable performance from a single, compact chuck. Built for stability and precise run‑out performance The compact geometry and robust assembly of the chuck aim to deliver high run‑out accuracy, keeping holes true and repeatable even when used in series production. The fact that the chuck and shank form a single unit reduces the risk of loosening or misfit that can occur with separate adaptors. Paired with right‑hand rotation design, the component is optimised for standard drilling applications on compatible machine spindles, balancing everyday durability with the precision expected in professional workshops. For reliable MK3 clamping and workshop compatibility, request technical availability or application advice from Metav Werkzeuge — supply from Emmerich with experienced consulting tailored to industrial and trade requirements. Technical data Article number: 4000832522NW Type: SBF‑plus Product: Quick‑change drill chuck Facts Clamping range: 1–13 mm Shank: MK3 Rotation: Right‑hand Outer diameter: 50 mm Special features Integrated Morse taper MK3 Self‑tightening function Compact construction for improved run‑out accuracy Chuck and shank form a single unit FAQ What clamping range does the chuck support? The chuck supports a 1–13 mm clamping range, making it suitable for a wide variety of standard twist drills and small cutters. Is the integrated taper compatible with standard spindles? Yes, the integrated MK3 Morse taper matches machine spindles designed for MK3 tapers and provides a secure, repeatable interface for everyday workshop use. How does the self‑tightening mechanism affect performance? The self‑tightening action increases holding security under load and reduces the need for frequent manual retightening, which improves drilling consistency and tool life with the ALBRECHT quick‑change chuck. Can this chuck be used for precision holemaking? The compact design and unitary shank–chuck assembly enhance concentricity and deliver high run‑out accuracy, which supports precise holemaking in typical workshop applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Quick-Change Drill Chuck 1-13mm B16 Right-Hand Accuracy Self-Tightening Hardened Parts - RÖHM
Take advantage of the combination of accuracy-grade construction, self-tightening operation, and hardened wear parts for consistently concentric results in high-speed drilling; order or request specification advice via Metav Werkzeuge if required. Spiro quick-action drill chuck 1–13 mm (B16) — accuracy-grade, self-tightening chuck by RÖHM The Spiro quick-action drill chuck 1–13 mm (B16) is an accuracy execution, self-tightening chuck engineered for right-hand rotation applications on drilling machines and boring mills Accuracy-grade, self-tightening design Clamping range 1–13 mm Hardened wear parts for longevity B16 cone shank, right-hand rotation Consistent concentricity for precision machining The accuracy execution of this clamping system ensures stable concentricity when holding small to medium tools, which reduces run-out and improves hole quality. Built as a precision variant, the chuck combines a 1–13 mm clamping range with a finely finished jaw interface so that radial deviation is minimised during spindle rotation. Because the mechanism is self-tightening, tightening effort is maintained automatically during operation, translating into repeatable hole positions and reduced scrap rates in component production. Built for continuous high-speed operation All moving and wearing components are hardened, which extends service life under continuous use and limits dimensional drift. The design includes a continuous, self-acting re-tightening function that keeps the tool seated securely at elevated speeds; this feature is particularly beneficial for high-speed drilling tasks where thermal and centrifugal forces can otherwise loosen conventional chucks. The chuck’s suitability for precision work on drilling machines and boring mills means it is specified where speed and accuracy must coexist. Compatibility, handling and maintenance benefits Equipped with a B16 cone shank, the chuck fits compatible machine spindles with a secure taper connection and an outer diameter of 50 mm, providing compact clearance in machine heads. The keyless, self-clamping principle removes the need for an external key while also reducing handling time during tool changes, which improves workflow efficiency on the shop floor. Routine maintenance is simplified: thanks to the hardened wear parts and the self-tightening mechanism, inspection intervals can be extended and downtime reduced, supporting reliable production scheduling. For precision-focused workshops, request a tailored technical consultation from Metav Werkzeuge to specify the RÖHM Spiro quick-action drill chuck (article 4000832069NW) for the intended machine and application Technical data Article number: 4000832069NW Brand: RÖHM Product type: Quick-action drill chuck Facts Clamping range: 1–13 mm Outer diameter: 50 mm Shank: B16 Rotation direction: Right-hand Packaging unit: 1 Special features Accuracy execution Self-tightening / self-clamping All wear parts hardened Continuous, self-acting re-tightening Cone mounting (B16) Designed for high speeds and precision work on drilling machines and boring mills For right-hand rotation FAQ What clamping range does the chuck cover? The RÖHM Spiro quick-action drill chuck (article 4000832069NW) provides a clamping range of 1–13 mm, suitable for a wide variety of twist drills and similar tooling. Is this chuck suitable for high-speed drilling? Yes — the design includes continuous self-acting re-tightening and hardened wear parts, which make the chuck appropriate for high-speed drilling and precision operations on drilling machines and boring mills. Can the chuck be fitted to a standard B16 spindle? Yes — the chuck is supplied with a B16 cone shank, intended for direct mounting into compatible machine spindles with a matching taper. How does the self-tightening mechanism benefit workshop productivity? The self-tightening function maintains clamping force automatically during rotation, reducing tool slippage and changeover time; this supports consistent hole quality and fewer interruptions on the production line. What maintenance is required to keep the chuck performing accurately? Maintenance is minimal: periodic cleaning and inspection of the jaws and taper are recommended. The hardened wear parts and self-tightening feature reduce wear rates and extend service intervals. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Quick-Change Drill Chuck 1–13mm Self‑Clamping MK2 Right‑Hand Operation - ALBRECHT
Benefit from reliable, time-saving clamping with the self‑tightening action, a 1–13 mm clamping range and an integrated MK2 Morse taper that delivers secure, concentric drilling; order the SBF‑plus directly via Metav Werkzeuge or request specialist advice from their consultants. SBF-plus quick-change drill chuck — 1–13 mm, MK2, right-hand rotation (ALBRECHT) The SBF-plus quick-change drill chuck is a self‑tightening, compact chuck with an integrated Morse taper MK2, engineered for dependable, high‑precision drilling in right‑hand rotation workshop applications. Self-tightening for secure clamping Clamping range 1–13 mm Integrated MK2 Morse taper Compact design for high runout accuracy Consistent precision that reduces rework The compact construction of this quick‑change chuck combines high runout accuracy with an effective clamping range of 1–13 mm, reducing wobble and the need for rework. The self‑tightening mechanism converts the spindle’s rotation into improved chuck grip, so drills remain concentric under load; this translates into fewer rejects and steadier repeatability on bench drills and production stands. Emphasising measurable performance, the design supports stable drilling results with small to medium diameter tools and helps maintain component tolerances more reliably. Robust connection and stable power transmission A permanently integrated Morse taper MK2 shank ensures a rigid mechanical interface between the chuck and the machine spindle. The single‑piece assembly—where chuck and shaft form one unit—minimises micro‑movement and secures torque transfer for tougher drilling tasks. The assembly’s 50 mm outside diameter and compact geometry contribute to improved contact area and thermal stability, which together preserve concentricity during continuous operation. For machinists and workshop managers, that means predictable tool behaviour and fewer interruptions for retightening. Practical workshop advantages and straightforward upkeep Built for right‑hand rotation, the chuck’s self‑tightening action simplifies routine operation and reduces the need for additional clamping operations. The single‑unit construction lowers the number of components to inspect, while periodic cleaning and a quick runout check are the primary maintenance steps to preserve performance. Supplied as a single unit in its packaging, the chuck supports efficient stocking and straight‑forward fitment. Metav’s technical team can advise on compatibility with existing spindles and recommend best practice for installation and inspection to keep uptime high. Choose ALBRECHT quality with the integrated MK2 taper — contact Metav Werkzeuge for availability and tailored technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000832521NW Brand: ALBRECHT Model: SBF-plus Product type: Quick-change drill chuck Facts Clamping range: 1–13 mm Mounting taper: MK2 Outside diameter: 50 mm Rotation direction: right-hand rotation Packaging unit: 1 Special features Integrated Morse taper MK2 Self‑tightening chuck mechanism Compact construction for optimal stability High runout accuracy through compact design Chuck and shank form one unit FAQ What clamping range does the ALBRECHT SBF-plus support? The ALBRECHT SBF‑plus quick‑change drill chuck supports a 1–13 mm clamping range, suitable for small to medium drill sizes and common workshop operations. Is the SBF-plus compatible with drill presses that accept Morse taper MT2? Yes, the SBF‑plus features an integrated Morse taper MK2 (MT2), offering direct compatibility with spindles and adapters designed for that taper size. How does the self‑tightening function work with right‑hand rotation? The self‑tightening mechanism of the chuck increases gripping force as the spindle turns in right‑hand rotation, using rotational torque to improve clamping security under load. What maintenance is recommended to preserve runout accuracy? Regular cleaning of the chuck interface, visual inspection for wear, and occasional runout measurement are recommended to maintain the SBF‑plus’s high runout accuracy and reliable performance. Which SKU should be ordered for this specific ALBRECHT model? Order SKU 4000832521NW for the ALBRECHT SBF‑plus quick‑change drill chuck with MK2 mounting and 1–13 mm clamping range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
51mm Supra Heavy Duty Keyless Drill Chuck 3-16mm B18 Right-Hand - RÖHM
Take advantage of the combination of robust self-tightening clamping, a 3–16 mm clamping range, and a B18 taper for reliable integration into stationary machines; order directly via Metav Werkzeuge or consult our specialists for application advice. RÖHM Supra heavy-duty keyless drill chuck — 3–16 mm, B18, right-hand rotation The RÖHM Supra keyless drill chuck is a heavy industrial design for stationary machines, offering a 3–16 mm clamping range with a B18 taper for right-hand rotation. Self-tightening heavy-duty design 3–16 mm clamping range for versatility B18 taper for secure machine integration Designed for right-hand rotation Robust clamping for demanding production The chuck's self-tightening mechanism ensures that torque increases the grip on the tool, reducing slipping under load and improving safety in continuous production. With a 3–16 mm clamping range, the unit accommodates a wide spread of twist drills and small toolholders, lowering tool-change frequency and simplifying inventory. The heavy industrial construction is tailored to stationary applications, translating into reduced downtime and a steadier production flow when machining repetitive holes. Secure fit and machine compatibility for consistent results Fitted with a B18 taper, the chuck integrates with machines that accept this standard shank size, creating a compact, concentric connection that helps maintain low runout. Specified for right-hand rotation, the design matches the majority of conventional drill spindles, ensuring predictable torque direction and chip evacuation. The modest 51 mm outer diameter makes installation straightforward in many bench and pillar drills, while the overall geometry supports accurate concentricity for improved hole quality. Built for continuous operation and straightforward upkeep The heavy-duty construction of this quick-change chuck focuses on longevity and low-maintenance use in workshop and industrial environments. The keyless, self-tightening operation reduces dependency on external keys or tools, accelerating changeovers and simplifying routine handling. Where service is required, the compact design allows for quick inspection and replacement as a single unit, keeping maintenance intervals short and predictable for production planners. For dependable heavy-duty clamping choose the RÖHM Supra — order via Metav Werkzeuge for fast supply from Emmerich and consult our technical team at info@metav-werkzeuge.com or +49 2822 7131930 for application-specific guidance Technical data Article number: 4000832062NW Label: Schnellspannbohrfutter Supra Spann-D.3-16mm B 18 f.Re.-Lauf RÖHM Manufacturer: RÖHM Product type: Quick-change drill chuck Packaging unit: 1 Facts Clamping range: 3–16 mm Outer diameter: 51 mm Shank / taper: B18 Rotation direction: Right-hand (for right-hand rotation) Design: Heavy industrial version Special features Self-tightening operation Suitable for stationary machines Quick-change / keyless style chuck Type: Supra FAQ What clamping range does the chuck support? The chuck supports a 3–16 mm clamping range, allowing use with a broad selection of twist drills and small toolholders. Is the chuck suitable for bench and pillar drills? Yes. The B18 taper and compact 51 mm outer diameter make it appropriate for many bench and pillar drill spindles designed for B18 shanks. Does the chuck require a key to tighten? No. The Supra is a quick-change, self-tightening design that increases grip under torque without an external key. Can the chuck be used in continuous industrial applications? The heavy industrial construction of the Supra is designed for continuous operation in stationary machines, offering durability and reduced downtime. What direction of rotation is supported by this chuck? This model is intended for right-hand rotation, matching the standard spindle direction of most drilling machines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
55mm Precision Spiro Keyless Drill Chuck 3-16mm, Self-Tightening, Hardened Parts, Right-Hand - RÖHM
Take advantage of the combination of precision operation, continuous self-acting re-tensioning, and hardened wear parts for reliable performance in high-speed drilling and precision applications; order the RÖHM Spiro B16 keyless drill chuck directly via Metav Werkzeuge or consult the team for additional advice. RÖHM Spiro B16 Keyless Drill Chuck — Accuracy version with B16 taper, 3–16 mm clamping range RÖHM Spiro B16 keyless drill chuck designed for precision drilling and compatibility with standard twist drills; suitable for drilling machines and boring mills operating in right-hand rotation Accuracy version for precision work Self-acting continuous re-tensioning Hardened wear parts for extended life B16 taper shank for right-hand rotation Precision clamping for accurate machining results The RÖHM Spiro keyless drill chuck in its accuracy version delivers stable clamping across the 3–16 mm range, ensuring consistent concentricity when handling twist drills and reamers. The chuck’s design focuses on repeatable positioning and minimal runout, which reduces rework and improves hole quality in serial production or one-off precision tasks. Hardened components maintain alignment over prolonged use, preserving measurement-critical results on drilling machinery and boring mills. Built for high-speed operation and secure retention Thanks to self-acting re-tensioning, the chuck keeps a positive clamping force even under centrifugal and thermal stresses encountered at elevated speeds. This automatic re-tensioning, combined with its construction for high speeds, prevents loosening during operation and supports safer machining cycles. The direction-specific design (for right-hand rotation) and robust construction mean reliable performance when stable retention and uninterrupted cycles are essential for productivity. Low-maintenance integration with workshop workflows The B16 taper mounting allows straightforward fitting to compatible spindles, enabling quick changeovers and secure seating for everyday workshop processes. All critical wear parts are hardened, which translates into long service life and fewer interventions for replacement or adjustment. As a keyless solution, the chuck simplifies tool changes for operators and integrates well with existing toolrooms, reducing downtime while maintaining the precision required for demanding drilling and reaming operations. For precision-driven machining tasks, contact Metav Werkzeuge to discuss the RÖHM Spiro B16 keyless drill chuck, confirm compatibility with current machinery and arrange fast delivery or expert advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000832070NW Manufacturer: RÖHM Product: Keyless drill chuck Type: Spiro Version: Accuracy execution Facts Clamping range: 3–16 mm Outer diameter: 55 mm Taper shank: B16 Direction of rotation: Right-hand UID: 4000832070NW Special features Accuracy execution · self-clamping All wear parts hardened Continuous, self-acting re-tensioning Suitable for high speeds and precision work on drilling machines and boring mills With taper shank · for right-hand rotation FAQ What is the clamping range of this chuck? The RÖHM Spiro B16 keyless drill chuck clamps from 3–16 mm, making it suitable for a wide range of twist drills and reamers (Article number 4000832070NW). Which spindle interface is required for mounting? Mounting requires a B16 taper shank; the B16 taper ensures secure seating on compatible spindles for the RÖHM Spiro keyless drill chuck. Is this chuck suitable for high-speed drilling? Yes. The RÖHM Spiro chuck features continuous self-acting re-tensioning and hardened wear parts, which support safe and reliable operation at elevated speeds on drilling machines and boring mills. Does the design support precision drilling tasks? The accuracy execution of the chuck provides improved concentricity and repeatability, making the RÖHM Spiro suitable for precision drilling and finishing operations. Are the wear components designed for long service life? All wear parts in the RÖHM Spiro keyless drill chuck are hardened, which extends service life and reduces the frequency of maintenance interventions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
56mm 3–16mm Quick-Change Drill Chuck MK2 Self-Clamping For Right-Hand Rotation, Compact Design - ALBRECHT
Combine the MK2 mounting with a 3–16 mm clamping range for fast tool changes and consistent concentricity during right‑hand drilling. The integrated Morse taper and self‑tightening mechanism give a compact unit with high run‑out accuracy, supporting smoother, more reliable production results. Order the ALBRECHT SBF‑plus directly via Metav Werkzeuge or ask our consultants for application advice. ALBRECHT SBF‑plus Quick‑Change Drill Chuck (3–16 mm, MK2) — Self‑tightening, Right‑Hand Rotation The SBF‑plus quick‑change drill chuck is a compact, self‑tightening MK2‑mounted chuck designed for secure, right‑hand rotation drilling in workshop and light industrial applications. Self‑tightening with integrated Morse taper Clamping range 3–16 mm High run‑out accuracy, compact design MK2 shank for direct mounting Precise, reliable performance for repeatable drilling results The compact construction of this quick‑change chuck provides optimal stability and consistently low run‑out, which translates into improved hole quality and longer life for cutting tools. Thanks to the self‑tightening function and the integrated Morse taper, the chuck and shank form a single, rigid unit that reduces micro‑movement under load. The measurable clamping range of 3–16 mm covers the most common drill sizes, while the balanced 56 mm outer diameter helps dampen vibration. For production environments where repeatability matters, this configuration reduces rework and boosts throughput. Simple mounting and dependable compatibility with MK2 spindles Mounting is straightforward: the MK2 shank fits standard Morse taper spindles, making the chuck suitable for bench drills and smaller drill presses that accept MK2. The unit is optimised for right‑hand rotation, ensuring correct engagement and torque transfer in conventional drilling operations. Because the chuck and the mounting shank are designed to act as one, setup time is reduced and run‑out behaviour remains stable across tool changes, which is particularly valuable for batch work and workshops aiming for efficient tool changeovers. Built for workshop durability and everyday ease of use The robust, compact design of this quick‑change chuck emphasises functional longevity and low maintenance. The integrated taper and self‑tightening action reduce the need for frequent retightening under normal operating conditions, while the solid construction supports continuous workshop use. This makes the product suitable for trade professionals and small production lines seeking a reliable, time‑saving clamping solution. Metav Werkzeuge supports selection and delivery from its Emmerich hub, combining practical availability with technical guidance when required. Contact Metav Werkzeuge for tailored advice and fast delivery of the ALBRECHT SBF‑plus; our specialists in Emmerich will help determine suitability for specific drills or production setups Technical data Article number: 4000832524NW Type: SBF‑plus Brand: ALBRECHT Product: Quick‑change drill chuck Mounting: MK2 Facts Clamping range: 3–16 mm Outer diameter: 56 mm Rotation: Right‑hand rotation Packaging unit: 1 Special features Integrated Morse taper Self‑tightening Chuck and shank form a single unit Compact design for improved stability and run‑out accuracy Optimised for right‑hand drilling FAQ Is the ALBRECHT SBF‑plus suitable for standard bench drill spindles? The ALBRECHT SBF‑plus quick‑change drill chuck with its MK2 mount is designed for compatibility with spindles that accept a Morse taper 2 seating. What drill diameters can be clamped reliably? Clamping is specified from 3–16 mm, so the chuck reliably secures common drill sizes used in general workshop and light industrial work. How does the self‑tightening mechanism benefit everyday use? The self‑tightening action of the ALBRECHT SBF‑plus reduces the frequency of manual retightening and helps maintain concentricity under load, improving hole quality and tool life. Does the chuck affect run‑out and vibration during drilling? The compact design and integrated taper of the ALBRECHT SBF‑plus contribute to high run‑out accuracy and reduced vibration, which supports better surface finish and longer tool life. Can the chuck be used in continuous production applications? Yes; the robust construction and the fact that the chuck and shank act as a single unit make the ALBRECHT SBF‑plus well suited for repetitive tasks and small production runs. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
56mm Precision Keyless Drill Chuck 3-16mm, Self‑Clamping High Runout Accuracy, B16 Shank - ALBRECHT
Robust, precision clamping with a B16 taper and 3–16 mm clamping range delivers dependable hold and reduced vibration for high‑duty applications; order the ALBRECHT quick‑change chuck directly via Metav Werkzeuge or consult our specialists for compatibility advice. ALBRECHT Quick‑change drill chuck SBF — clamping Ø 3–16 mm, B16 taper ALBRECHT Quick‑change drill chuck SBF is a self‑tightening chuck with B16 taper, engineered for right‑hand rotation and continuous, high‑precision workshop use. Self‑clamping for secure hold Clamping range 3–16 mm B16 taper shank Hardened, replaceable wear parts Precise hold that reduces vibration and tool wear The SBF quick‑change chuck delivers maximum clamping force within a compact design, translating into stable tool retention and significantly reduced chatter. Because the unit is self‑clamping, axial forces increase grip as torque rises, which improves cutting accuracy and extends cutter life. The design emphasises highest runout accuracy, meaning less concentric error at the tool tip and smoother results when drilling or reaming. For workshops aiming to raise throughput with consistent hole quality, the precise clamping interaction is a clear operational advantage. Built for continuous heavy use and easy servicing Components subject to wear are case‑hardened, ground and replaceable, so the chuck sustains long service intervals and straightforward maintenance. Rather than replacing the entire assembly, worn elements can be exchanged, cutting downtime and life‑cycle costs. The robust construction is intended for high continuous load, making the chuck suitable for demanding production or repetitive shop tasks where durability and predictable performance matter. Routine inspection and occasional part replacement keep concentricity and clamping reliability at peak levels. Seamless integration into machines with B16 taper Fitted with a B16 taper shank, the chuck mates with machines designed for this standardised interface, enabling quick retrofits to drill presses and compatible spindles. The clamping range 3–16 mm covers a broad selection of common tool diameters, reducing the need for frequent tool changes or additional adapters. The compact outer diameter (56 mm) aids accessibility in tighter setups. Designed for right‑hand rotation, the chuck is optimised for standard drilling operations and is straightforward to incorporate into existing process flows without special adjustments. For reliable high‑precision clamping choose the ALBRECHT SBF quick‑change chuck and contact Metav Werkzeuge for a compatibility check and purchasing guidance — Metav Werkzeuge will assist from specification to delivery. Technical Data Article number: 4120167211NW Product type: Quick‑change drill chuck (SBF) Manufacturer: ALBRECHT Shank: B16 Facts Clamping range: 3–16 mm Outer diameter: 56 mm Rotation direction: Right‑hand rotation Packaging unit: 1 Special features Self‑clamping, maximum clamping force For high continuous load and highest runout accuracy All wear parts case‑hardened, ground and replaceable Taper shank B16 For right‑hand rotation FAQ What clamping range does the chuck cover? The ALBRECHT quick‑change drill chuck SBF covers a 3–16 mm clamping range suitable for common twist drill sizes and general machining tasks (SKU 4120167211NW). Is the chuck compatible with B16 spindles? Yes — the chuck uses a B16 taper shank, so it fits machines and spindles designed for the B16 interface without further adapters. Can worn parts be replaced, or must the entire chuck be renewed? Wear parts are case‑hardened, ground and replaceable, allowing component replacement rather than full unit exchange to reduce operating costs. Is the chuck suitable for continuous production runs? The design is intended for high continuous load and maintains accuracy under sustained use, making it appropriate for repetitive workshop operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
56mm Precision Keyless Drill Chuck 3–16mm, Self‑Clamping, B18 Taper, Right‑Hand Rotation - ALBRECHT
Take advantage of the combination of self-tightening clamping, a 3–16 mm clamping range and a B18 taper for reliable, repeatable performance in production environments; order directly via Metav Werkzeuge or consult the team for application advice. ALBRECHT SBF quick-change drill chuck — clamping range 3–16 mm, B18 arbor The ALBRECHT SBF quick-change drill chuck provides secure, fast tool changes for machines with a B18 taper and is designed for right-hand rotation applications. Self-tightening design for secure retention Clamping range 3–16 mm B18 taper arbor for easy mounting Hardened, replaceable wear parts Built for sustained workshop performance The SBF quick-change drill chuck is engineered for continuous use, combining a B18 arbor with a clamping range of 3–16 mm to cover common workshop bit sizes while keeping setups compact. Its self-tightening mechanism and emphasis on maximum clamping force reduce slippage under torque, which supports stable drilling operations and fewer tool re-tightening steps. Designed for heavy duty cycles, this chuck helps maintain throughput in repetitive production tasks without compromising on grip. Precision that reduces rework and downtime High runout accuracy is central to the chuck’s design: all moving contact surfaces and wear parts are hardened, ground and replaceable, which preserves concentricity and extends service intervals. The result is consistent hole quality and tighter tolerances, particularly important for sensitive assemblies or when subsequent machining depends on hole precision. Maintenance is simplified because individual wear components can be replaced, avoiding full-unit swaps and reducing lifecycle costs. Compatibility and straightforward operation across machines Specified for right-hand rotation, the chuck mounts via the standard B18 taper, making it compatible with lathe and drill spindle interfaces that accept B18 arbors. The compact footprint, with an outer diameter of 56 mm, permits close access in congested setups and is supplied as a single unit for immediate installation. The construction prioritises robustness for high continuous loads while keeping the user interaction simple: fast tool changes, secure retention and minimal adjustment. This makes the chuck suitable for production lines, toolrooms and maintenance shops that demand dependable clamping. Choose the ALBRECHT SBF quick-change chuck for robust, repeatable clamping with B18 compatibility — contact Metav Werkzeuge for tailored supply and technical advice from Emmerich. Technical Data Article number: 4120167212NW Product type: Quick-change drill chuck Manufacturer: ALBRECHT Facts Clamping range: 3–16 mm Arbor / mounting: B 18 Outer diameter: 56 mm Rotation direction: Right-hand rotation Packing unit: 1 Special features Self-tightening Maximum clamping force Taper arbor mount (B18) For high continuous load with highest runout accuracy All wear parts hardened, ground and replaceable Suitable for right-hand rotation FAQ What clamping range does the chuck cover? The chuck offers a 3–16 mm clamping range, allowing use with a broad spectrum of common twist drills and bits. Which arbor is required for mounting? Mounting is via a B18 arbor; the SBF quick-change drill chuck is prepared for direct installation on spindles that accept B18 tapers. Is the chuck suitable for continuous production use? Yes. The SBF chuck is designed for high continuous load, with hardened components and construction that supports extended operating cycles. Can worn components be replaced? Individual wear parts are hardened, ground and replaceable, enabling targeted maintenance and reducing the need for full replacements. How precise is the runout of the chuck? The design prioritises runout accuracy, so the chuck maintains concentricity for consistent hole quality and reduced rework. Manufacturer: ALBRECHT; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com