60° Live Centre Three-Point, Running Tailstock Tip for High Speeds 2500 rpm MT5B - Vertex
Take advantage of the combination of high-speed capability, precise 0.005 mm accuracy and the proven MT5B taper to maintain concentricity and finish in demanding turning operations. Order the live centre directly via Metav Werkzeuge or consult our specialists if additional specification details are required. VLC-MT5B revolving centre – live centre for high-speed turning (MT5B) The VLC-MT5B is a live centre designed to support rotating workpieces at increased spindle speeds, providing accurate axial support for finishing and precision turning. High-speed operation up to 2,500 r.p.m. Tight running accuracy 0.005 mm Standard MT5B taper for simple integration 60° centre angle for general turning tasks Reliable support at elevated spindle speeds The live centre is engineered for high-speed lathe work, rated to run at 2,500 r.p.m., which helps keep cycle times down on production and prototype runs. By providing steady axial support with a 60° centre angle, the unit contributes to reduced wobble and improved surface finish when used for turning and finishing operations. For workshops that value consistency, this stability translates into fewer rework cycles and a more predictable process chain, while the compact bearing arrangement sustains rotational stability during extended runs. Reach and rigidity that improve handling of longer parts With a length of 274 mm and a mass of 4.5 kg, the tool balances reach with axial rigidity. The MT5B taper ensures secure seating in compatible tailstocks and adaptors, offering a practical combination of accessibility and support for longer bars or stepped components. This geometry reduces deflection under load, which in turn helps maintain dimensional tolerances during facing, finishing and light turning tasks. The unit’s form factor allows integration into existing setups without extensive modification. Precision that protects concentricity and finish Specified with an accuracy of 0.005 mm, the centre is suitable for operations where concentricity matters. In practical terms, this level of runout control helps to safeguard the cutting edge orientation against oscillation, producing a more even tool engagement and a finer surface texture. For users less familiar with metrology terms: this figure describes the radial deviation under rotation and serves as a direct indicator of how precisely the centre will hold a workpiece in line with the spindle axis. Practical applications and workshop compatibility The revolving centre is intended for traditional lathe support tasks where a live centre is preferred over a dead (fixed) centre, such as finishing, reaming or light-duty turning where rotation of the support reduces heat build-up and wear. The MT5B interface aligns the component with a wide range of mid‑sized lathes equipped for Morse taper connections. The product is supplied by Vertex, a manufacturer with a long history in precision tooling, and is commonly specified where repeatable axial support is required across batches. For machining that demands precise, high‑speed support, contact Metav Werkzeuge to discuss the Vertex VLC‑MT5B live centre and arrange supply from our Emmerich quality hub. Technical data SKU: VLC-MT5B GTIN: 4061905085444 Manufacturer: Vertex Facts Length: 274 mm Weight: 4.5 kg Maximum speed: 2,500 r.p.m. Accuracy: 0.005 mm Centre angle: 60° Special features Revolving/live centre for high-speed turning MT5B taper interface Suitable for finishing and precision support Category: Vertex FAQ What maximum spindle speed is the live centre rated for? The live centre supports speeds up to 2,500 r.p.m., allowing the VLC-MT5B to be used in higher-speed finishing operations. What level of concentricity can be expected? The VLC-MT5B is specified with an accuracy of 0.005 mm, ensuring tight radial runout for consistent concentricity during turning. Which taper fits the tailstock or adaptor? The tool uses an MT5B taper, designed for secure seating in compatible tailstocks and Morse-taper adaptors. What is the overall length and how does that affect rigidity? The centre measures 274 mm in length; when combined with its 4.5 kg mass, this provides a balance of reach and axial stability suitable for many workshop turning tasks. Who is the manufacturer of this live centre? The live centre is produced by Vertex; the product is sold under the SKU VLC-MT5B and is distributed via Metav Werkzeuge for the European market. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60° MT3B Live Centre Three-Point, High-Speed 4000 rpm, 0.005 mm Accuracy, 186 mm Length - Vertex
Reliable high-speed support and precise centring combine in one compact tool: a VLC-MT3B live centre offering up to 4,000 rpm and an accuracy of 0.005 mm, enabling consistent surface quality and repeatable setups. Order the live centre directly via Metav Werkzeuge or consult the in-house advisors for specification matching. VLC-MT3B live centre (MT3) by Vertex — 4,000 rpm, 0.005 mm accuracy A VLC-MT3B live centre engineered for high-speed turning and precise workpiece support on MT3 spindles High-speed rating to 4,000 rpm Precision runout 0.005 mm Standard MT3 taper fitting 60° hardened centre angle Engineered for fast, repeatable accuracy High-throughput turning demands components that can run reliably at speed without compromising accuracy. This rotating centre is rated to 4,000 rpm and specifies an accuracy of 0.005 mm, which translates into consistent concentricity and reduced scrap rates in short-run and repetitive production tasks. The precision specification helps to maintain tolerances across batches, enabling predictable finishing operations and lowering the need for rework. The combination of speed and repeatability is particularly beneficial for shops that balance cycle time with tight dimensional control. Stable support that improves surface finish A correctly profiled centre point reduces deflection and vibration during rotation, improving surface quality and tool life. The centre angle of 60° delivers conventional seating geometry for turned parts while the shaft length of 186 mm provides ample engagement for extended workpieces. At 1.4 kg the unit offers a compact mass that contributes to dynamic stability without adding excessive inertia to the spindle. These characteristics support controlled cutting conditions and a marked improvement in finish on turned diameters. Straightforward integration with standard lathe spindles Compatibility with a standard MT3 taper ensures quick fitment and minimal setup changeover on most manual and semi-automatic lathes. The rotating design eliminates fixed-point wear patterns and allows uninterrupted rotation with the workpiece, helping to reduce local heat build-up and scoring. The centre is suitable for quick installation and removal, which supports flexible production scheduling and rapid tooling swaps when different taper sizes or centres are required. Practical applications across workshop and light production environments Designed for conventional turning tasks and precision support during machining, the centre is appropriate for a range of metalworking operations where high-speed rotation and tight runout are required. Typical uses include general turning, facing where accurate centring is critical, and light-duty production where component consistency matters. The technical specification supports small-scale manufacturers and skilled workshops aiming to improve throughput while keeping finish and tolerance demands under control. Contact Metav Werkzeuge in Emmerich to discuss the Vertex VLC-MT3B for high-speed precision applications or to request detailed technical advice via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data SKU: VLC-MT3B GTIN: 4061905085789 Brand: Vertex Core data Accuracy: 0.005 mm Max speed: 4,000 rpm Length: 186 mm Weight: 1.4 kg Centre angle: 60° Special features Rotating (live) centre for high-speed turning MT3 taper fitting for standard spindles Precision 60° centre point for conventional seating FAQ What maximum spindle speed is the live centre rated for? The Vertex VLC-MT3B is specified for operation up to 4,000 rpm, providing suitability for many high-speed turning tasks. How accurate is the centre for concentric turning? Accuracy for the VLC-MT3B is specified at 0.005 mm, enabling repeatable concentricity and reduced rework in precision turning. Which spindle taper does the centre use? The unit fits a standard MT3 taper, offering straightforward compatibility with MT3-equipped lathes. What are the physical dimensions relevant to setup? Length is 186 mm and the rotating centre weighs 1.4 kg, dimensions that support secure engagement without excessive spindle load. For which types of turning is this centre intended? The live centre is suited to general turning and finishing operations where high-speed rotation and tight runout tolerance are required; it is aimed at workshops and light production environments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
630mm Independent Four-Jaw Chuck, 4-M20 T-Slots, 280 r.p.m., 162 kg - Vertex
Combine the 630 mm swing capacity, independent jaw adjustment and a robust 162 kg construction for reliable, vibration‑resistant workholding — order the independent four‑jaw chuck directly via Metav Werkzeuge or consult our specialists for application advice. VKC-25 independent four‑jaw chuck — 630 mm diameter, 280 r.p.m., Vertex The VKC-25 independent four‑jaw chuck provides adaptable lathe clamping for large turning and heavy‑duty machining operations, offering a solution for irregular and asymmetrical workpieces where controlled, individual jaw adjustment is required *Independent jaw adjustment for irregular blanks *630 mm swing for large workpieces *Rated speed 280 r.p.m. for stable rotation *Robust 162 kg cast construction Heavy‑duty stability for large turning operations The construction of this chuck focuses on stable, repeatable clamping for demanding turning tasks: the 630 mm swing capacity combined with a 162 kg cast body delivers a low centre of gravity and reduced vibration during rotation. The mass and geometry of the assembly provide a solid foundation for machining larger diameters, which in turn supports consistent surface quality and longer tool life. Operators will benefit from more predictable dynamic behaviour on the machine spindle when processing heavy or elongated components. Precision clamping for complex and asymmetrical parts Individual jaw control enables exact centring and adaptation to non‑cylindrical blanks, converting manual adjustments into dependable clamping accuracy. The independent design of the chuck allows correction of runout and off‑centre stock without modification to the workpiece, improving precision and shortening setup time. This targeted adjustability supports higher effective throughput in batch production of bespoke parts and reduces the need for secondary fixturing operations. Mounting compatibility and operational efficiency Mounting provisions include 4‑M20 t‑slots for secure attachment to compatible faceplates or adapters, simplifying integration into existing lathe setups. The nominal running speed of 280 r.p.m. is specified for stable performance with substantial workpiece mass. Supplied as a heavy‑duty clamping solution from Vertex, the design emphasises durability and low maintenance, with straightforward access for routine inspection and lubrication to preserve clamping integrity over extended service intervals. For advice on machine compatibility or to discuss how the VKC‑25 from Vertex can be integrated into a specific production line, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 for specialist guidance. Technical data Article number: VKC-25 GTIN: 4061905086557 Brand: Vertex Core specifications Diameter: 630 mm Max speed: 280 r.p.m. Weight: 162 kg T‑slots: 4‑M20 eClass: 21020490 Special features Independent four‑jaw operation Suitable for large turning work SKU/UID: VKC-25 Image available FAQ What maximum workpiece diameter can be clamped? The chuck supports a swing capacity of 630 mm, allowing secure clamping of large diameters with the VKC‑25 independent four‑jaw chuck from Vertex. Is the chuck suitable for irregular or asymmetrical parts? Yes, the independent jaw design permits individual adjustment of each jaw, making the chuck ideal for clamping irregular blanks and enabling precise centring without additional fixtures. What rotational speed is recommended for safe operation? The VKC‑25 is specified for operation up to 280 r.p.m., which provides stable rotation for substantial workpiece masses. How is the chuck mounted to the lathe spindle or faceplate? Mounting is accommodated via 4‑M20 t‑slots, allowing secure attachment to appropriate adapters or faceplates compatible with the lathe setup. How does the chuck weight affect machining performance? At 162 kg the construction enhances stability and dampens vibration, contributing to improved surface finish and reduced tool wear during heavy‑duty turning. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
71mm Quick-Change Tool Holder Head Gr. B With Eccentric Clamp, 32mm Bore, 0.01mm Repeatability - TECWERK
Take advantage of the combination of fast, repeatable tool changes and hardened, precision-ground contact surfaces for consistent turning results; the eccentric clamping and 40 angular positions ensure flexible machining while the 71 mm overhang accommodates extended setups — order directly via Metav Werkzeuge or consult our specialists for compatibility advice. Quick-change toolholder head Gr. B TECWERK — eccentric clamping, 40 index positions Quick-change toolholder head Gr. B TECWERK is designed for rapid tool changes in lathe and turning applications, offering high repeatability and robust, hardened contact surfaces Eccentric clamping for quick tool changes Repeatable positioning to 0.01 mm Hardened, ground gearing and seating 40 index positions in 9° steps 32 mm central bore and 71 mm overhang Precision and process reliability for turning operations The quick-change toolholder head delivers a measurable improvement in set-up speed and process stability thanks to its eccentric clamping system and confirmed 0.01 mm repeatability. The eccentric clamp secures cutting tools quickly while maintaining the repeatable position required for serial production, which reduces downtime between operations and minimises rework. For workshops and job shops that value consistent results, the unit’s measured indexing and firm seating reduce setup variability and support predictable cycle times. Flexible positioning for multi-angle tooling With 40 index positions at approximately 9° increments, this holder head enables a wide range of tool orientations without the need for separate fixtures, allowing machining strategies to be adapted on the fly. The ability to set different tool angles within a single holder supports complex facing, profiling and finishing tasks while keeping the toolcentre height adjustment straightforward via the integrated set screw. This flexibility translates into fewer tool changes on the machine and a leaner tool inventory. Robust construction for demanding shop use Critical contact areas are hardened and ground, providing a durable seating surface that resists wear and preserves alignment over time. The central 32 mm bore and the structural design accommodate stable mounting, while the maximum 71 mm overhang suits operations requiring extended reach. These characteristics combine to deliver a component that withstands the mechanical stresses of heavy turning and repeated index cycles, prolonging service life and reducing maintenance frequency. Practical handling and compatibility in production The head’s design focuses on fast handling: tool swaps are completed with the eccentric locking action, and the tip height of the turning tool is adjusted securely using the set screw on the tool post. Because the clamping and locating faces are precision-ground, repeatability is largely independent of operator skill, which supports consistent quality across different shifts and operators. For integration into existing setups, the component’s dimensions and index resolution make it suitable for a wide range of conventional and CNC lathes, provided the spindle and turret interfaces match the 32 mm centre bore. Contact Metav Werkzeuge for tailored advice on fitment and delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specification details and stock availability Technical data Article number: 2000832152NW Manufacturer: TECWERK Type/Grade: Gr. B Product type: Quick-change toolholder head Core data Overhang (max.): 71 mm Central bore diameter: 32 mm Repeatability: 0.01 mm Index positions: 40 Index step: 9° Special features Eccentric clamping for rapid tool changes Tip height adjustable via set screw Hardened and ground gearing and seating Designed for consistent repetitive positioning FAQ What level of repeatability can be expected from this holder head? The Quick-change toolholder head Gr. B TECWERK provides repeatable positioning to 0.01 mm, ensuring reliable tool location across repeated changes. How many angular settings are available and what is the step size? The unit offers 40 index positions, each at approximately 9°, enabling a broad range of tool orientations without additional fixtures. What bore size is required for mounting this head? The component uses a 32 mm central bore, which must match the turret or adapter interface for correct mounting. Is the tip height adjustable and how is it set? Tip height is adjusted on the turning tool using the built-in set screw on the toolholder, allowing precise height correction after indexing. Are the contact surfaces durable for serial production? Yes. The gearing and planing contact surfaces are hardened and ground, providing wear resistance and stable seating for repetitive production runs. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
75-96mm Hollow Spindle Stop With Internal Expansion Jaws, Adjustable Clamp - TECWERK
Take advantage of precise, rear‑mounted clamping and an adjustable axial position for repeatable set‑ups and minimal spindle runout; the secure inner‑wall jaw pressure guarantees a reliable seat in hollow spindles. Order the device directly via Metav Werkzeuge or consult the team for application advice. Hollow Spindle Stop for Spindle Ø75–96 mm – TECWERK The Hollow Spindle Stop is a rear‑inserted clamping device for hollow spindles, designed to secure tooling by pressing the jaws against the spindle inner wall and to allow axial repositioning with a special key. Rear insertion with special key tightening Clamping range 5–96 mm Fits spindle Ø75–96 mm Adjustable axial position with release key Precise clamping that reduces runout and improves repeatability The device provides a secure fit by pressing the clamping jaws against the inner wall of the hollow spindle, which reduces radial play and contributes to consistent concentricity during turning and rotating operations. The clamping range 5–96 mm covers a wide variety of mandrel and tool diameters, enabling one solution for multiple set‑ups. This compact rear‑mounted design simplifies installation in machines where front access is limited, while the mechanism ensures repeatable positioning for production runs. Simple operation and fast adjustment for workshop efficiency Assembly is straightforward: the stop is inserted from the rear of the hollow spindle and tightened with a special key, which drives the clamping screws and activates the jaws. When axial repositioning is required, the same key releases the jaws to allow controlled movement along the spindle axis. This method eliminates the need for complex fixtures, shortens set‑up times and reduces machine downtime — a clear operational advantage for busy workshops and serial production environments. Robust seating and safe handling minimise process interruptions Because the jaws are pressed directly onto the spindle inner wall, the connection achieves a positive seating that resists loosening under rotation, improving safety and reducing the risk of tool run‑out. The mechanism’s design prioritises a reliable seating rather than relying solely on friction, which supports stable machining forces and consistent machining quality. This stability contributes to lower scrap rates and less rework, making the stop a pragmatic choice for quality‑conscious operations. Wide applicability across machines and set‑ups The configuration suits hollow spindles with outer dimensions between Ø75–96 mm while the internal clamping span permits use with small to large tool shafts (5–96 mm). The product is particularly suitable for lathe spindles and machining centres that accept rear‑mounted accessories, offering a flexible solution for turning, balancing and rotational measurement fixtures. Where space constraints or accessibility limit front mounting, this rear‑inserted stop provides a compact and practical alternative. Contact Metav Werkzeuge for tailored technical advice and ordering support on the TECWERK hollow spindle stop; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000832498NW Label: Hollow spindle stop for spindle Ø75–96 mm Product type: Hollow spindle stop Manufacturer: TECWERK Packaging unit: 1 Facts Clamping range: 5–96 mm Suitable spindle outer diameter: Ø75–96 mm Special features Rear insertion and tightening with a special key Clamping jaws press onto spindle inner wall for secure seat Axial position adjustable when released with the key FAQ What spindle diameters does the stop suit? The hollow spindle stop fits spindles with an outer diameter of Ø75–96 mm and provides an internal clamping span from 5–96 mm, allowing versatile use across different tool shafts. How is the device tightened and released? Tightening and release are performed from the rear using a special key; turning the key expands the jaws to press against the inner wall and secures the stop, while reversing the action allows axial adjustment. Is the stop suitable for production use with frequent repositioning? Yes, the design supports repeated axial repositioning with consistent seating; the positive jaw contact reduces the likelihood of loosening under rotational loads, which is beneficial for serial production. Which SKU identifies this product for ordering? Order under SKU 4000832498NW; referencing this number ensures the correct hollow spindle stop from TECWERK is supplied. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
75mm Centre Point 60° Pro Accuracy Extended Nose MK2, Runout 0.005 mm, 7000 min⁻¹ - RÖHM
Take advantage of the combination of high runout precision, extended tip support and a sturdy MT2 taper for reliable turning operations; the result is consistent concentricity and fewer reworks. Order the RÖHM HVL Pro MK2 centre directly via Metav Werkzeuge or ask our consultants if needed. RÖHM HVL Pro MK2 centre — MT2 taper with extended running point for precision turning RÖHM HVL Pro MK2 is a pro‑grade centring centre designed for demanding lathe work, offering extended tip support and high concentric accuracy for stable machining. Pro accuracy design, extended tip 60° precision running tip MT2 shank, 17.78 mm diameter Max 7000 rpm and 140 kg load Consistent concentricity for reduced rework The pro version delivers exceptional concentricity thanks to a guaranteed runout of max. 0.005 mm, which keeps the workpiece rotation true even under load. This measurable accuracy shortens inspection cycles and reduces scrap rates, making the tool an economical choice for repetitive turning operations. The 60° tip geometry provides a standard contact that is compatible with common centre holes, while the extended tip improves support for longer workpiece projections, translating technical precision into tangible production benefits. Built for higher speeds and heavier parts Engineered for dynamic use, the centre accepts speeds up to 7000 rpm and a recommended maximum workpiece mass of 140 kg, enabling faster cycle times without compromising stability. The compact 43 mm housing and balanced construction contribute to smooth rotation, reducing vibration and tool wear. Where faster spindle speeds are required, the combination of robust bearings and the MT2 taper reduces the risk of slippage and runout drift, supporting efficient throughput in modern turning applications. Straightforward integration and durable fit The Morse taper MT2 shank and a shaft diameter of 17.78 mm ensure secure seating in standard lathe sockets, allowing quick changeover between centres and other Morse‑taper tooling. The unit’s overall projection of 75 mm and a tip length of 34 mm provide a practical balance between reach and rigidity. Lightweight at approximately 0.5 kg, the centre is easy to handle and install, while the precise construction maintains alignment over repeated cycles, improving process reliability in the workshop. Practical benefits for workshop productivity Beyond raw numbers, the design focuses on uptime and operator confidence: the pro execution reduces the need for frequent re‑centering, and the extended running point helps maintain support on elongated components. These attributes mean fewer interruptions and more predictable part quality, which is particularly valuable in batch production and precision turning tasks. The HVL Pro MK2 pairs measurable technical performance with practical advantages that simplify daily machining workflows. Contact Metav Werkzeuge today for tailored technical advice, compatibility checks and to place an order for the RÖHM HVL Pro MK2 centre via Metav Werkzeuge GmbH — specialists in precision tools and workshop supplies. Technical data Article number: 4000832081NW Brand: RÖHM Product type: Centre Facts Projection: 75 mm Tip length: 34 mm Tip angle: 60° Housing diameter: 43 mm Shaft diameter: 17.78 mm Runout deviation: max. 0.005 mm Max. rpm: 7000 rpm Max. workpiece weight: 140 kg Weight: 0.5 kg Special features Pro accuracy version with extended running point MT2 (Morse taper 2) shank Packaging unit: 1 SKU: 4000832081NW FAQ What shank does this centre use? The RÖHM HVL Pro MK2 centre is supplied with an MT2 (Morse taper 2) shank for secure seating in standard lathe sockets. What is the maximum rotational speed for safe operation? The centre is specified for up to 7000 rpm; running within this limit ensures the designed balance and bearing performance. How accurate is the running tip concentricity? The RÖHM HVL Pro MK2 live centre guarantees a runout deviation of max. 0.005 mm, supporting precision turning and reduced scrap. Can it support heavy or long workpieces? With a maximum recommended workpiece weight of 140 kg and an extended tip length, the centre provides enhanced support for longer components within the stated limits. What identifiers should be used when ordering? Order using SKU 4000832081NW and specify RÖHM HVL Pro MK2 centre to ensure correct supply and compatibility. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75mm Tool Holder For Steel Turning Inserts 20mm Clamping Height - TECWERK
Take advantage of a compact quick-change system that combines reliable compatibility with Steel holder head A, a defined 20 mm clamping height and a short overall length for space-critical lathe setups; order the holder via Metav Werkzeuge or consult the Metav team for application advice. TECW ERK Quick-change holder for steel holder head A — 20 mm clamp height The TECW ERK Quick-change holder for steel holder head A is a compact toolholder designed to accept turning bars and to provide a stable clamping interface in confined lathe environments. Quick-change system for turning bars Compatible with steel holder head A 20 mm clamp height for consistent seating Compact overall length 75 mm for tight setups Minimise set-up variance with defined clamp geometry The holder’s 20 mm clamping height creates a consistent datum for tool seating, which is essential for repeatable turning operations and reduced set-up adjustments. With a defined seating plane, the risk of axial runout is lowered and tool repeatability is improved; this supports predictable machining tolerances and fewer trial cuts. The modular clamping interface is intended to be integrated into established tool stations, where reliable positioning shortens calibration time and helps maintain process stability. Fit into restricted toolpost spaces without compromise A short overall length of 75 mm enables installation in tight toolpost arrangements and minimises interference with workpiece fixtures. The compact form factor allows closer tool-to-tailstock setups and better access for coolant or chip evacuation, which can improve surface finish and extend insert life. Where machine envelopes are constrained, such a small footprint helps maintain flexibility in tool layout and reduces the need for workarounds that can slow production. Interchangeability for faster changeovers and workflow continuity Designed for turning bars and matched to Steel holder head A, the quick-change concept supports rapid tool swaps and straightforward reconfiguration of the tool carousel. Changeover times are reduced because the holder is compatible with a standard head interface, enabling consistent clamping behaviour across similar toolholders. This interchangeability is conducive to lean workflows, as fewer bespoke fixtures are required and tool inventory can be standardised for easier storage and replacement. Practical scope and workshop integration The toolholder is intended for use in conventional lathe toolposts where a fixed clamping height and compact length deliver repeatable results. Routine maintenance is straightforward since the mechanical interface is deliberately simple and robust; components that determine clamping behaviour are easily inspected and cleaned. Specifications such as the defined clamp height and overall length make the holder suitable for applications where predictable tool setting and minimal setup time are priorities. Contact Metav Werkzeuge for tailored advice on integrating this TECWERK quick-change holder into workshop setups or request application-specific specifications via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000832156NW SKU: 2000832156NW Product type: Quick-change holder Facts Overall length: 75 mm Clamp height: 20 mm Packaging unit: 1 Special features For turning bars Compatible with Steel holder head A Manufacturer: TECWERK FAQ How does the 20 mm clamp height affect repeatability? A defined 20 mm clamp height creates a consistent reference plane that improves repeatability by reducing variations in tool seating and minimizing axial runout for the TECW ERK quick-change holder. Is this holder suitable for compact lathe toolposts? Yes. The 75 mm overall length is designed for tight setups and allows installation in compact toolpost arrangements while maintaining secure clamping behaviour. Can the holder be used with other head types? The holder is specified for compatibility with Steel holder head A; use with other head types should only be considered if mechanical compatibility is confirmed. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
79mm Centre Cone MK3 Taper 60° Sharp Tip, Housing Ø56mm, Max Workpiece 400kg - RÖHM
Take advantage of precise centring with a robust rotating design: the combination of an MK3 shank, 60° cone angle and a 79 mm projection delivers reliable alignment and reduced setup time for turning operations; order the centring cone directly via Metav Werkzeuge or consult our specialists for selection and delivery. RÖHM centring cone MK3, projection 79 mm — rotating pointed form, 60° cone angle A RÖHM centring cone MK3 engineered for precise workpiece alignment in lathe and turning-centre applications, featuring a pointed rotating form and a 60° cone angle for secure, repeatable centring. MK3 shank for standard Morse taper fittings 60° pointed cone for secure centring 79 mm projection for deep workpiece reach Supports workpieces up to 400 kg Accurate centring that reduces rework and increases throughput The rotating pointed form with a 60° cone angle provides a consistent contact geometry that minimises runout and improves concentricity. Fitted with an MK3 shank (Morse taper 3), this centring solution is suitable for standard toolholders and tailstocks, enabling quick integration into existing setups. The precision of the contact surface reduces the need for repeated alignment checks, which in turn shortens setup times and supports higher manufacturing throughput without compromising component quality. Robust support for heavy and extended components A solid housing with a 56 mm diameter and a projection of 79 mm extends reach into deeper workpieces while maintaining stability. The centring cone is specified to support workpieces up to 400 kg, making it appropriate for medium to heavy turning tasks where reliable load capacity is essential. The mechanical design focuses on rigidity and load distribution, so fixtures remain secure during machining and the risk of deflection under load is reduced. Compatibility, integration and low maintenance handling Designed to fit common Morse taper systems, the device offers straightforward integration with standard lathes and turning centres; the MK3 interface enables interchangeability with existing tooling. The rotating centre form reduces frictional heating at the contact point and minimises marking on softer materials, helping to preserve surface finish. Routine maintenance is limited to periodic inspection and lubrication of bearings where applicable, ensuring long service intervals and stable performance in production environments. Contact Metav Werkzeuge to secure expert advice on selecting the right RÖHM centring cone MK3 for specific turning applications and to arrange fast delivery from Emmerich. Technical Data Article number: 4000832105NW Manufacturer: RÖHM Product type: Centring cone Packaging unit: 1 Facts Projection: 79 mm Cone angle: 60° Housing diameter: 56 mm Max. workpiece weight: 400 kg Special features MK3 shank (Morse taper 3) Rotating pointed form Suitable for lathe and turning-centre applications FAQ What taper does the centring cone use? The RÖHM centring cone uses an MK3 shank (Morse taper 3) for direct fitting into compatible tailstocks and toolholders (SKU 4000832105NW). Which cone angle is specified and why does it matter? A 60° cone angle is specified; this geometry provides a stable, well-centred contact surface that improves concentricity and reduces workpiece runout. How deep can the cone reach into a workpiece? The unit offers a 79 mm projection, which allows access to deeper bores and extended components while maintaining centring accuracy. What load can the centring cone support? The design supports workpieces up to 400 kg, suitable for medium to heavy turning operations where robust support is required. Is the centring cone compatible with standard lathes? Yes, the MK3 interface and rotating pointed form are compatible with standard lathe tailstocks and turning centres; the form also helps reduce marking on the workpiece surface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Independent Four-Jaw Chuck, 200 r.p.m., 8-M20 T-Slots - Vertex
Take advantage of a combination of large-capacity clamping, stable rotational performance and straightforward mounting for consistent workshop results; order the VKC-32 through Metav Werkzeuge or consult our specialists for tailored integration. VKC-32 Independent four-jaw chuck, Ø 800 mm — Vertex A VKC-32 independent four-jaw chuck engineered for heavy‑duty lathe work and precise workholding across large components. Independent four-jaw clamping system Large Ø 800 mm clamping diameter 200 rpm maximum rotational speed Robust construction, weight 265 kg High-capacity clamping for large components The Ø 800 mm clamping diameter provides capacity for substantial workpieces while the independent jaws permit individual adjustment for irregular shapes and offset turning. This flexibility translates into reliable datum setting and reduced setup time when fitting castings or asymmetrical parts. The design brings a balance of accessibility and control, supporting production processes that demand both capacity and repeatable alignment. Stable rotation for heavy machining tasks With a rated 200 rpm maximum and an overall mass of 265 kg, the chuck offers enhanced stability during low‑to‑medium speed operations typical of heavy turning and facing. The substantial mass reduces vibration and improves surface finish when machining large diameters, while the conservative speed rating aligns with safety and longevity in demanding industrial environments. This combination supports consistent part quality and lower tool wear over extended runs. Flexible mounting adapted to workshop fixtures Mounting is facilitated by T-slots configured for M20 fastenings, enabling secure installation on a variety of spindle adaptors and faceplate arrangements. The provision for multiple fastening points ensures even load distribution and simple integration with existing lathe tooling. Clear mechanical interfaces reduce the need for bespoke adapters and help maintain concentricity when repeating setups across medium‑ to large‑batch production. Durable design built for industrial workflows Constructed for repetitive, heavy‑use scenarios, the chuck emphasises robust materials and serviceability to meet shopfloor expectations. The independent clamping principle provides controlled force application to each jaw, supporting delicate adjustment without compromising grip. Backed by Vertex engineering, the solution aligns with precision workflows and contributes to predictable throughput in component turning and repair shops. For reliable heavy‑duty workholding with traceable quality, order the Vertex VKC-32 through Metav Werkzeuge — our Emmerich team will advise on integration and delivery options. Technical Data Article number: VKC-32 GTIN: 4061905085949 Name: Four-jaw chuck, independent Facts Clamping diameter: 800 mm Maximum speed: 200 rpm Weight: 265 kg Special features T-slots: 8-M20 Operation: independent jaws Manufacturer: Vertex ECLASS: 21020490 FAQ What types of workpieces suit this chuck? The VKC-32 independent four-jaw chuck is suitable for large, irregular and asymmetrical workpieces where individual jaw adjustment is required; it performs well on heavy turning tasks. Can the chuck be used at high spindle speeds? The chuck is rated to 200 rpm; this specification for the VKC-32 aligns with heavy‑duty turning and is chosen to optimise stability and tool life. How is the chuck mounted to the lathe? Mounting uses T-slots prepared for M20 fastenings, allowing the VKC-32 to be secured to compatible spindle adaptors or faceplates with even load distribution. Does the independent jaw design improve accuracy? Yes; independent jaws permit precise jaw-by-jaw adjustments so the chuck can be centred to non‑cylindrical parts, improving alignment and reducing rework on large components. Who manufactures this chuck? The chuck is manufactured by Vertex and supplied to European customers through Metav Werkzeuge, offering industrial reliability for workshop applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
80mm Adapter Sleeve With 30mm Bore For Large Boring Bars, Quick-Change Steel Holder Head Compatibility - TECWERK
Benefit from reduced changeover times and a robust clamping interface: the holder’s 30 mm cylindrical bore and 80 mm length enable direct mounting of large boring bars and Morse taper sleeves for efficient shop-floor operation. Order the holder directly via Metav Werkzeuge or consult the specialists for integration advice. TECWERK quick-change holder for steel holder head A — 30 mm bore, 80 mm length A TECWERK quick-change holder designed for direct mounting of large boring bars and Morse taper sleeves, intended for use with steel holder head A in lathe and boring-bar applications Quick-change design for fast tool swaps 30 mm cylindrical bore for large boring bars Direct mount for Morse taper sleeves Compatible with steel holder head A Faster changeovers and steadier production flow The quick-change concept reduces non-productive time by allowing rapid swapping of tooling components, which improves throughput on batch and single-piece production runs. The combination of a 30 mm bore and an 80 mm length creates a compact, repeatable interface that supports stable clamping of large-diameter boring bars; this leads to fewer alignments and shorter setup cycles. Where uptime and predictable cycle times matter, the design contributes directly to smoother manufacturing processes. Secure reception for large boring bars and Morse tapers A cylindrical inner diameter accepts substantial tool shanks and facilitates direct mounting of Morse taper sleeves, eliminating intermediate adapters in many setups. The cylindrical reception helps to centre the shank and transfer clamping force evenly, which reduces vibration and deflection during cutting. For users less familiar with Morse tapers: these sleeves enable secure, taper-based seating of cutting tools and are routinely used where axial stability and concentricity are required. Straightforward compatibility with standard quick-change systems Engineered specifically for the steel holder head A, the adapter integrates into established quick-change tool-holder assemblies without the need for customised fixtures. This compatibility simplifies inventory management and reduces the number of variant parts held in the toolroom. The compact design also supports consistent repeatability when replacing inserts or switching bar tooling, improving part-to-part uniformity on precision operations. Practical workshop use and handling The holder is supplied as a single unit and is convenient to store as a standard spare in maintenance kits. Its simple geometry makes surface inspection and routine checks quick, and the lack of complex moving parts reduces service intervals. In practice, adopting standardised quick-change holders contributes to a tidier workflow and fewer tooling errors, supporting both small engineering shops and larger production departments that prioritise reliability. Contact Metav Werkzeuge for tailored integration advice and to secure the TECWERK quick-change holder for improved lathe and boring-bar operations; Metav Werkzeuge supports delivery and technical consultation from Emmerich Technical data Article number: 2000832171NW Label: Quick-change holder for steel holder head A, 30 mm bore Manufacturer: TECWERK Product type: Quick-change holder Numbers Overall length: 80 mm Bore diameter: 30 mm Length (l): 80 mm Packaging unit: 1 Special features with cylindrical bore direct reception of large boring bars for Morse taper sleeves for quick-change steel holder head suitable for steel holder head A FAQ What is the primary function of this holder? The TECWERK quick-change holder is designed to provide a stable, repeatable interface for large boring bars and Morse taper sleeves, streamlining tool changes in lathe and boring applications. Which tool-holding systems is it compatible with? Compatibility is intended for the quick-change steel holder head A and standard Morse taper sleeves; the 30 mm cylindrical bore accommodates larger shank diameters used in heavy-duty boring. What are the key dimensions to check before ordering? Verify the bore diameter (30 mm) and overall length (80 mm); these dimensions determine fit with the existing steel holder head and the required reach for the machining operation. Can Morse taper sleeves be mounted directly? Yes, the design allows direct mounting of Morse taper sleeves, enabling a secure taper-based seating without additional adapters in many cases. What is the SKU or article number for ordering? The article number is 2000832171NW; this identifies the TECWERK quick-change holder for procurement and stock control. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
85mm Insert Prism Clamping Ø14mm For Toolholder With Prism - TECWERK
Take advantage of a compact clamping solution that combines reliable repeatability with straightforward integration into prism-equipped quick-change systems; the precision 14 mm clamping Ø and 85 mm length ensure stable holding of round shanks in confined setups. Order the insert prism directly via Metav Werkzeuge or ask our consultants if needed. Insert Prism Gr. A – 14 mm clamping Ø, 85 mm length (TECWERK) The Insert Prism Gr. A is a precision clamping insert for round shanks, designed for use in quick-change holders fitted with a prism and intended for reliable, repeatable tool anchoring in production and maintenance environments Compatible with prism quick-change holders Max clamping Ø 14 mm 85 mm insertion length Precision clamping for round shanks Consistent, repeatable clamping for series work The prism insert delivers stable, repeatable clamping by locating round tool shanks in a defined groove that minimises radial play. With a max clamping Ø of 14 mm and an 85 mm insertion length, the component supports consistent concentricity during turning or light milling operations, reducing inspection rework and setup variability. The geometry is optimised for lateral stability, which helps maintain process quality across repeated tool changes. Seamless fit in prism-equipped quick-change holders Designed specifically for use with quick-change holders that incorporate a prism, the insert simplifies integration into modular tooling systems. The feature set from the product data emphasises compatibility with round shanks and prism-type holders, enabling rapid swaps while retaining alignment. This reduces machine downtime caused by lengthy re-clamping and supports fast tool replacement in multi-shift environments. Minimised setup time and improved throughput By combining defined locating with straightforward insertion depth, the component supports faster fixture setup and predictable run-out characteristics. The short, deterministic installation procedure helps technical teams keep cycle times steady, promoting smoother production flow. Where fixture repeatability is a priority, the insert contributes to lower scrap rates and more predictable part tolerances through reliable clamping behaviour. Simple handling and installation logic The clamping insert is supplied as a single unit and is intended for direct placement into the corresponding quick-change holder. The compact 85 mm length provides sufficient engagement for secure holding while remaining space-efficient in tight tool assemblies. The concise specification and single-piece supply make inventory management and replacement planning straightforward for workshop stores. Suitable users and typical applications This insert is aimed at industrial workshops, toolrooms and service departments that operate modular toolholding systems and require stable clamping of round shanks. Typical uses include general turning fixtures, light milling in modular holders, and rapid changeovers where improved concentricity and repeatability have a direct effect on part quality. The component supports manufacturers and maintenance teams seeking a compact, prism-based clamping solution. Contact Metav Werkzeuge for a direct order or technical consultation on prism compatibility — Metav’s specialists in Emmerich will advise on matching the TECWERK insert to existing quick-change holders and tooling systems, phone +49 2822 7131930, eMail info@metav-werkzeuge.com Technical data Article number: 2000832141NW Manufacturer: TECWERK Product type: Insert prism Gr. A For quick-change holders with prism Dimensions & clamping Length: 85 mm Max clamping Ø: 14 mm Packing unit: 1 Applications & features For round shanks Fits quick-change holders with prism insertion Precision clamping insert FAQ What clamping diameter does the insert support? The insert supports a maximum clamping diameter of 14 mm as specified for the Insert Prism Gr. A (TECWERK, SKU 2000832141NW). Which holders is this component compatible with? Compatibility is stated for quick-change holders fitted with a prism; the prism geometry secures round shanks when the insert is mounted. Is the insert suitable for round tool shanks only? Yes, the product data indicates suitability for round shanks; the prism profile is intended to locate cylindrical tool shanks securely. What is the supplied length and how does that affect installation? The insertion length is 85 mm, giving defined engagement depth for stable clamping while remaining compact for confined tool assemblies. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
85mm Tool Holder For Round Shank Drill Rods With Prism, 20mm Clamping Diameter - TECWERK
Reliable clamping is provided by the integrated prism and the defined clamping Ø 20 mm, while the quick‑change design ensures fast swaps and reproducible positioning in compact tool racks. Compact dimensions (length 85 mm, height 20 mm) permit integration into dense machining setups. Order the interchangeable holder directly via Metav Werkzeuge or consult the Metav team for application advice. Interchangeable holder for steel holder head A — prism seating, clamping Ø 20 mm (TECWERK) Interchangeable holder for steel holder head A is a quick‑change clamping component with prism seating designed for secure mounting of round drill rods in metalworking fixtures. Prism seating for round drill rods Clamping diameter 20 mm Quick‑change for steel holder head A Accurate alignment for repeatable machining results The built‑in prism offers defined seating for round drill rods, reducing radial play and supporting precision in serial operations. With a clamping Ø 20 mm, the holder provides a consistent contact geometry that helps to lower runout and improves tool life through stable support. This configuration is particularly suited to applications where reproducible tool position and minimal re‑setup time are required. Fast tool changes that reduce downtime The quick‑change interface, designed for the steel holder head A, enables rapid replacement of tooling while maintaining repeatable clamping accuracy. The compact length 85 mm contributes to short tool overhangs, which helps to preserve stiffness in the holder assembly and supports higher process reliability. The result is a measurable efficiency gain in operations where frequent tool swaps are necessary. Compact format for flexible workshop integration With an overall length of 85 mm and height of 20 mm, the holder is engineered for integration into tight tool magazines and multi‑spindle fixtures. The simple prism seating concept keeps the design straightforward and robust, allowing the component to be used as a dependable clamping element for round drill rods across a variety of machining set‑ups. The combination of small footprint and precise seating supports straightforward retrofitting into existing quick‑change systems. For reliable clamping and rapid tool swaps, request the TECWERK interchangeable holder from Metav Werkzeuge for direct supply from Emmerich or ask Metav's consultants for application guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 2000832165NW Product type: Interchangeable holder Brand: TECWERK Suitable for: Steel holder head A Execution: with prism for round drill rods Packaging unit: 1 Dimensions & numerical data Overall length: 85 mm Length l: 85 mm Height: 20 mm Clamping diameter: 20 mm Special features Prism seating for round drill rods For quick‑change steel holder head Compatible with round drill rods FAQ What clamping diameter does the holder support? The interchangeable holder for steel holder head A provides a clamping diameter of 20 mm, suited for standard round drill rods. Is this holder compatible with quick‑change systems? Yes, the TECWERK interchangeable holder is designed for a quick‑change steel holder head and permits fast tool swaps while maintaining repeatable positioning. What are the overall dimensions of the holder? The holder has an overall length of 85 mm and a height of 20 mm, offering a compact footprint for dense tool arrangements. Which seating principle secures the round rods? A prism seating secures round drill rods, ensuring defined contact and reduced radial play for improved machining stability. Can the holder be retrofitted into existing head systems? The holder is intended for use with steel holder head A and can be integrated into compatible quick‑change setups where that interface is present. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
92/102mm Quick-Change Tool Holder Head Gr. C With Eccentric Clamp, 40° Indexing 40mm Bore - TECWERK
Take advantage of rapid tool changes with eccentric clamping and repeatability of 0.01 mm for consistent production quality; order the component directly via Metav Werkzeuge or consult our specialists for application-specific advice. Quick-change toolholder head Gr. C (TECWERK) — eccentric clamping with 40-position indexing The Quick-change toolholder head Gr. C is designed for rapid swapping of turning tools while preserving precise alignment and repeatability in metalworking setups. Eccentric clamping for fast tool swaps Repeatability of 0.01 mm for consistent parts 40-position indexing in 9° increments Hardened and ground gearing and seating surfaces Reduce setup time with precise quick changes The combination of eccentric clamping and a secure seating design enables significantly faster changeovers compared with conventional clamping methods, reducing machine downtime and increasing throughput. The mechanism maintains a repeatability of 0.01 mm, which translates into fewer adjustments after each swap and less scrap. The tip height is adjustable via a set screw, allowing correct tool alignment without shims; this feature simplifies setup routines for both single-piece flow and batch production. Greater flexibility through indexed positioning and reach control With 40-position indexing offering 9° steps, the head allows fine angular adjustment of cutting tools to suit a variety of operations and geometries. The central bore of Ø 40 mm and a maximum reach of 92 / 102 mm (centre of bore to end/edge) provide clear information for planning tool envelopes and collision checks. These measurable parameters help integrators and workshop planners to layout fixtures and determine clearance quickly, supporting efficient cell design and predictable cycle times. Robust construction for long service life and consistent accuracy The drive teeth and contact faces are hardened and ground, reducing wear and preserving the locating accuracy over extended use. The hardened planar seating and precision-cut teeth ensure that the indexed positions remain stable under cutting loads, which reduces recalibration frequency and life-cycle costs. The design therefore supports a higher degree of process reliability and contributes to dependable part conformity in demanding turning applications. For tailored advice or to obtain a quote for the TECWERK quick-change toolholder head Gr. C, contact Metav Werkzeuge — our specialists in precision solutions can assist with compatibility checks and order processing. Technical Data Article number: 2000832153NW Manufacturer: TECWERK Product type: Quick-change toolholder head Gr. C SKU: 2000832153NW Facts Bore diameter: 40 mm Max reach: 92 / 102 mm Repeatability: 0.01 mm Indexing positions: 40 (9° steps) Special features Eccentric clamping for rapid tool changes Tip height adjustable by set screw Hardened and ground gearing Hardened and ground seating/planar contact 40 teeth enabling 40 angle settings FAQ How accurate is the positioning after a tool change? The head provides a repeatability of 0.01 mm, ensuring consistent repositioning after each change. What angular resolution is available for tool orientation? Indexing is available in 40 positions with 9° increments, allowing fine adjustment of the cutting edge orientation. What is the bore diameter and how does it affect mounting? The central bore is 40 mm; it is the diameter of the main body bore used for mounting and alignment in the turret or toolpost. Can the tip height be corrected without shims? Yes — the tip height is set using a set screw on the toolholder, permitting straightforward height adjustment during setup. What ensures long-term durability of the indexing mechanism? The teeth and seating faces are hardened and ground, which minimises wear and keeps indexed positions stable under load. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
High-speed NC live center
Technische Daten: Bezeichnung: Körnerspitze VHM Genauigkeit: 0,005 mm Gewicht: 1,3 kg bis 15,6 kg Länge: 176 mm - 380 mm Typ: MT3A, MT3B, MT4A, MT4B, MT5A, MT5B, MT6A Geschwindigkeit: 1500r.p.m. bis 4000r.p.m. Winkel: 60° Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Der Hersteller: Vertex Mit einer Erfahrung von über vier Jahrzehnten hat VERTEX sich als größter Hersteller für Maschinenteile in Taiwan einen Namen gemacht. Seit der Gründung im Jahr 1978 hat das Unternehmen kontinuierlich in seine Produktionskapazitäten investiert und verfügt nun über eine beeindruckende Fläche von mehr als 15000 m². VERTEX ist stolz darauf, sich auf Forschung und Entwicklung zu konzentrieren, um innovative Designs zu schaffen, die den steigenden Anforderungen der Branche gerecht werden. Darüber hinaus ist VERTEX dafür bekannt, dass 98% aller Artikel sofort ab Lager verfügbar sind. Diese hohe Lagerverfügbarkeit ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und ihre Maschinen reibungslos zu betreiben. VERTEX bleibt seiner Mission treu, qualitativ hochwertige Maschinenteile herzustellen und den Kunden einen erstklassigen Service zu bieten.
Interchangeable points live center
Technische Daten: Bezeichnung: Körnerspitze Vollhartmetall Material: Edelstahl Genauigkeit: 0,008 mm Gewicht: 0,9 kg bis 2 kg Länge: 127 mm - 182 mm T-Nut: MT2 bis MT4 Geschwindigkeit: 2500r.p.m. - 4000r.p.m. Winkel: 60° Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Das ist der Hersteller in einigen Worten: Mit einer Erfahrung von über vier Jahrzehnten hat VERTEX sich als größter Hersteller für Maschinenteile in Taiwan einen Namen gemacht. Seit der Gründung im Jahr 1978 hat das Unternehmen kontinuierlich in seine Produktionskapazitäten investiert und verfügt nun über eine beeindruckende Fläche von mehr als 15000 m². VERTEX ist stolz darauf, sich auf Forschung und Entwicklung zu konzentrieren, um innovative Designs zu schaffen, die den steigenden Anforderungen der Branche gerecht werden. Darüber hinaus ist VERTEX dafür bekannt, dass 98% aller Artikel sofort ab Lager verfügbar sind. Diese hohe Lagerverfügbarkeit ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und ihre Maschinen reibungslos zu betreiben. VERTEX bleibt seiner Mission treu, qualitativ hochwertige Maschinenteile herzustellen und den Kunden einen erstklassigen Service zu bieten.
Lathe center
Technische Daten: Bezeichnung: Körnerspitze VHM Material: Spitze aus Hartmetall Norm: DIN 806 Gewicht: 0,2 kg - 5,7 kg Länge: 100 mm bis 270 mm Winkel: 60° Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Vertex, der Hersteller in einigen Worten: Seit 1978 ist VERTEX der größte Hersteller für Maschinenteile in Taiwan. Mit einer beeindruckenden Produktionsfläche von über 15000 m² ist VERTEX in der Lage, große Mengen hochwertiger Maschinenteile herzustellen, um den Bedürfnissen der Kunden gerecht zu werden. Das Unternehmen hat sich auf Forschung und Entwicklung spezialisiert und ist stets bestrebt, innovative Designs zu entwickeln. Die hohe Lagerverfügbarkeit von 98% aller Artikel stellt sicher, dass die Kunden schnell und effizient bedient werden können. VERTEX hat sich einen hervorragenden Ruf aufgebaut, indem es qualitativ hochwertige Produkte liefert und gleichzeitig erstklassigen Kundenservice bietet. VERTEX ist der vertrauenswürdige Partner für Maschinenteile in Taiwan.
Light duty live center
Technische Daten: Bezeichnung: Universalkörnerspitze VHM Material: legierter Stahl Genauigkeit: 0,005 mm Gewicht: 0,3 kg - 3,2 kg Länge: 108 mm - 248 mm Geschwindigkeit: 1500r.p.m. - 3200r.p.m. Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Das ist der Hersteller in einigen Worten: Mit einer Erfahrung von über vier Jahrzehnten hat VERTEX sich als größter Hersteller für Maschinenteile in Taiwan einen Namen gemacht. Seit der Gründung im Jahr 1978 hat das Unternehmen kontinuierlich in seine Produktionskapazitäten investiert und verfügt nun über eine beeindruckende Fläche von mehr als 15000 m². VERTEX ist stolz darauf, sich auf Forschung und Entwicklung zu konzentrieren, um innovative Designs zu schaffen, die den steigenden Anforderungen der Branche gerecht werden. Darüber hinaus ist VERTEX dafür bekannt, dass 98% aller Artikel sofort ab Lager verfügbar sind. Diese hohe Lagerverfügbarkeit ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und ihre Maschinen reibungslos zu betreiben. VERTEX bleibt seiner Mission treu, qualitativ hochwertige Maschinenteile herzustellen und den Kunden einen erstklassigen Service zu bieten.
M12 Height Adjustment Screw With Nut For Changeable Holder, D1 - TECWERK
Take advantage of the combination of straightforward compatibility, standard M12 thread design and the included securing nut for efficient maintenance and minimal downtime. Order this spare part directly via Metav Werkzeuge or consult the team for application advice. Height-adjusting screw D1 M12 with nut – compatible spare part for TECWERK interchangeable holders The Height-adjusting screw D1 M12 with nut serves as a direct replacement component for TECWERK interchangeable-holder systems, enabling fine vertical adjustment and secure fastening within modular clamping setups. M12 thread for standardised mounting Nut included for secure fixation Compatible with TECWERK interchangeable holders Precise, standardised adjustment for modular setups The component provides a metric M12 thread, which ensures compatibility with widely used clamping interfaces and simplifies procurement and stocking. The standard thread size allows straightforward replacement of worn or damaged height adjusters without modification to the holder assembly. By using a standardised fixing, mechanical tolerances are preserved and readjustment is minimised, supporting continuous production flow with predictable results. Secure fastening reduces rework and setup time Delivered as a set that includes the nut, the item is intended to restore clamping reliability quickly after wear or during scheduled maintenance. The included fastening element guarantees that axial play can be eliminated without sourcing additional parts, shortening maintenance cycles and reducing the risk of improper assembly. Where repeatability and secure contact are required, this solution reinstates the intended clamping geometry efficiently. Designed for straightforward spare-part management As a dedicated replacement piece for TECWERK interchangeable-holder variants, this adjuster simplifies inventory management and spare-part logistics. Keeping compatible adjusters in stock reduces downtime associated with waiting for bespoke parts and supports predictable maintenance schedules. The straightforward specification also aids purchasing decisions, as the essential technical attribute — the M12 thread — is clearly defined and easy to cross-reference with existing assemblies. Clear compatibility and application note Specified as a spare part for all TECWERK interchangeable-holder versions, the product restores vertical adjustment capability and secure fixing in modular clamping systems. The set content explicitly lists the included nut, ensuring completeness at delivery. For designers and workshop managers, the item is a practical choice when matching components across a family of holders is required and when maintaining a consistent clamping standard is a priority. Contact Metav Werkzeuge for compatibility checks or to request the spare part for TECWERK systems and secure fast replacement with minimal interruption to workshop operations Technical data Article number: 2000832425NW SKU: 2000832425NW Manufacturer: TECWERK Product: Height-adjusting screw D1 Thread: M12 Set content: includes nut UID: 2000832425NW Facts Thread size: M12 Type designation: D1 Packaging unit: 1 Compatible with: TECWERK interchangeable-holder versions Special features Spare part for all TECWERK interchangeable holders Includes nut for immediate installation Standard metric thread for easy replacement Restores vertical adjustment and secure clamping Suited for routine maintenance and quick repairs FAQ Is this adjuster compatible with all TECWERK interchangeable holders? Yes. The height-adjusting screw D1 M12 with nut is specified as a spare part for all TECWERK interchangeable-holder versions and is intended to match the original interface. What thread size does the component use? The component uses a standard metric M12 thread, which facilitates replacement within common clamping systems. Does the delivery include the fastening nut? Yes. The set content includes the nut, so the component is ready for immediate installation without sourcing additional parts. Can this screw be used to restore clamping precision after wear? The adjuster is designed to reinstate vertical adjustment and secure fixing in modular holders, helping to recover the intended clamping geometry and repeatability. What is the article number for ordering? The article number is 2000832425NW; this identifier can be used when ordering the spare part for TECWERK systems. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
M4 Height-Adjustable Screw With Nut For Interchangeable Holder, Replacement Part - TECWERK
Take advantage of a compact replacement solution that combines secure vertical adjustment, simple installation and full compatibility with TECWERK quick-change holders. The M4 thread and included nut ensure reliable locking and repeatable positioning; order the part directly via Metav Werkzeuge or consult the specialists for fit guidance. Height-adjusting screw AA, M4 thread with nut – TECWERK spare part A height-adjusting screw designed as a replacement component for TECWERK quick-change holders, providing fine vertical adjustment in tool-holder systems. M4 thread for secure adjustment Compatible with all TECWERK change holders Supplied complete with locking nut Precise vertical adjustment for repeatable set-ups A compact height-adjusting screw with M4 thread and AA designation offers a straightforward mechanical method to set and lock tool or workpiece elevation. The metric M4 size denotes a 4 mm standard ISO thread, which delivers a predictable pitch and reliable clamping force when paired with the supplied nut. This results in repeatability during reassembly and minimises measurement variance in successive operations, a key benefit for production runs that demand consistent results rather than one-off accuracy checks. Rapid replacement to reduce machine downtime Designed as a direct spare, the component serves as a spare part for TECWERK quick-change holder systems, enabling swift field replacement without complex rework. Its simple geometry and the included fastening element allow maintenance teams to restore full function in minutes, which supports reduced setup time and lower production interruptions. Clear mechanical engagement and standardised thread form keep intervention uncomplicated and repeatable across different holder versions. Straightforward function, tangible workshop advantages The part’s strength lies in its uncomplicated design: thread, body and fastening element together provide a robust interface for height control without electronics or calibration routines. For workshops that favour mechanical reliability over electronic adjustment, this solution offers predictable behaviour, low susceptibility to contamination and minimal training requirements. The use of a standard M4 thread means replacement parts and compatible tools are widely available, supporting long-term operability. Stock reliability and system compatibility assurance As an authorised spare for TECWERK change holders, availability through established distributors ensures consistent supply and compatibility verification. Metav’s role as a centralised supplier and quality filter for the European market reduces procurement complexity and supports seamless replenishment for small workshops and industrial users alike. The combination of standardised connection, included nut and documented compatibility simplifies inventory management and supports efficient workshop planning. For fast, compatible replacement parts for TECWERK quick-change holders contact Metav Werkzeuge in Emmerich to confirm availability and suitability: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: 2000832421NW Type designation: AA Thread: M4 Manufacturer: TECWERK Product type: Height-adjusting screw Packaging unit: 1 Includes: Nut Facts Thread size: M4 Size designation: AA Packaging unit: 1 Special features Replacement for all TECWERK quick-change holder versions Supplied with nut Spare part for change holder systems FAQ What applications is this height-adjusting screw suitable for? The height-adjusting screw is intended as a replacement component for TECWERK quick-change holders and is suitable wherever fine vertical adjustment and locking are required within those holder systems. Does the part include the fastening element needed for installation? Yes, the delivery includes the locking nut, so the part is supplied ready for installation on compatible TECWERK quick-change holders (SKU 2000832421NW). How does the M4 thread affect compatibility and strength? The M4 thread is a standard metric thread form that provides reliable mechanical engagement and predictable clamping force when used with the matching nut, ensuring repeatable height control in the holder assembly. Can this component be used across different TECWERK holder versions? The component is specified as a spare for all TECWERK quick-change holder versions and is intended to provide consistent fit and function across those designs. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
M5 Height Adjusting Screw With Nut For Quick-Change Holder, Set - TECWERK
Reliable spare part with an M5 thread and included locking nut for secure height setting; benefits from a compact size A design and direct compatibility with TECWERK change holders — order directly via Metav Werkzeuge or consult our advisors for fitment details. Height-adjustment screw size A M5 incl. nut – height-adjustment component for TECWERK change holders The Height-adjustment screw size A M5 incl. nut is a replacement fastening element engineered for precise tool-height adjustment in TECWERK change-holder systems, providing a straightforward retrofit for maintenance and setup tasks. M5 threaded adjustment screw Includes locking nut Spare part for TECWERK holders Compact A-size design Accurate alignment that reduces setup time The adjustment fastener provides a consistent reference for tool height thanks to its M5 thread and matching nut, which together allow fine, repeatable calibration. By using a standardised thread size, the component simplifies alignment routines and reduces the risk of cumulative tolerance errors during tool changes. This stability translates into fewer trial cuts and less machine downtime, making process control more efficient across repeated set-ups. Compatibility that keeps production moving Designed specifically as a replacement for TECWERK change-holder variants, this part restores original fit and function without the need for adapter kits. The labelled spare-unit fits the intended holders and reinstates the original adjustment range, helping maintain cycle times and part quality. Integrating genuine spare components supports predictable behaviour under load and reduces surprises in serial production. Simple replacement and low-maintenance operation The item is supplied complete with a locking nut, enabling rapid exchange on the shop floor and immediate return to operation. The compact A-size form factor keeps access and handling straightforward during service intervals. Fewer steps in the replacement procedure mean lower skilled-labour time for recurring maintenance, which supports lean workshop practices and consistent output. A pragmatic choice for dependable workshops Choosing a standardised adjustment screw from recognised suppliers aligns with a broader quality strategy: predictable spare-part availability, easy stocking and straightforward traceability. Paired with Metav’s logistics and product range, this component contributes to a reliable supply chain and a pragmatic approach to workshop inventory management. The result is enhanced operational certainty and a more efficient maintenance workflow. Contact Metav Werkzeuge to confirm compatibility and secure the TECWERK M5 height-adjustment screw for prompt replacement or batch stocking Technical data SKU: 2000832422NW Product type: Height-adjustment screw Thread: M5 Core data Pack unit: 1 Size designation: A Special features Includes nut Spare part for TECWERK change-holder versions Label: Height-adjustment screw size A M5 incl. nut FAQ What thread size does the adjustment screw use? The adjustment screw uses an M5 thread; the unit is supplied complete with a locking nut for secure clamping. Is this part compatible with all TECWERK change holders? Yes, the item is intended as a spare part for TECWERK change-holder variants and restores original adjustment function. What is included in the delivery? Delivery comprises the height-adjustment screw size A M5 and the matching locking nut as a ready-to-fit set (SKU 2000832422NW). Can the component be replaced on the shop floor without special tools? Replacement is designed to be straightforward; standard spanners for an M5 nut are sufficient for removal and refit. Does the spare item require additional calibration after fitting? After mechanical installation, a brief verification of tool height is recommended to confirm the original setpoint; no specialised calibration is normally required. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
M7 Height Adjustment Screw With Nut For Interchangeable Tool Holder, Set - TECWERK
Take advantage of the size B format with a standard M7 thread and the included nut to ensure fast, reliable replacement in TECWERK interchangeable holder systems. Order directly via Metav Werkzeuge or contact the technical advisers for compatibility questions. Height-adjusting screw size B (M7) incl. nut – for TECWERK interchangeable holder A height-adjusting screw size B (M7) designed as a spare part for TECWERK interchangeable holders, enabling controlled height correction and secure fastening in tool-holding assemblies. Size B height adjustment M7 threaded connection Supplied with matching nut Spare part for TECWERK holders Minimise downtime with assured compatibility and fast replacement As a dedicated spare component, this height-adjusting screw provides straightforward compatibility with different versions of TECWERK interchangeable holders, reducing setup time and limiting production interruptions. The availability of a designated replacement screw for the holder family means maintenance teams can restore tool geometry quickly; fewer adjustments are required after fitting, which translates to improved process stability and predictable machine uptime. The component’s role as a direct spare part supports a streamlined spare-parts inventory strategy for workshops and production lines. Secure clamping through standard M7 metric threading The M7 designation refers to a metric thread with a nominal 7 mm diameter, a common standard that supports robust mechanical engagement. A standardised thread specification simplifies procurement and replacement, allowing technicians to match the screw with existing hardware without uncertainty. The thread profile ensures a secure connection under typical clamping loads, helping to maintain repeatable positioning of the tool holder and preventing loosening during operation. Clear reference to the M7 format aids engineering documentation and spare-parts management. Practical maintenance: set contents and adjustment benefit The delivery scope includes the screw and a matching nut, so no separate fastening hardware is required at installation. Including the nut in the set reduces assembly steps and minimises the risk of incorrect parts being used during repairs or height adjustments. The component allows fine height correction in the tool-holder interface, supporting precise tool alignment and consistent machining results. Regular use as a replaceable part contributes to predictable tool performance and eases the workload for maintenance staff when restoring holders to specification. For guaranteed compatibility with TECWERK holder ranges and prompt spare-part supply, contact Metav Werkzeuge — technical advisers can be consulted to confirm fitment and delivery options via info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data Article number: 2000832423NW Product type: Height-adjusting screw Label: Height-adjusting screw size B M7 incl. nut for interchangeable holder TECWERK Facts Thread: M7 Size/type: B Packaging unit: 1 UID: 2000832423NW Special features Spare part for all TECWERK interchangeable holder versions Set content: includes nut Intended use: height adjustment in interchangeable holders FAQ Is this screw compatible with all TECWERK interchangeable holders? The height-adjusting screw size B (M7) is specified as a spare part for TECWERK interchangeable holder versions and is intended for direct compatibility with those holder designs. What does M7 mean for the thread and fit? M7 denotes a metric thread with a nominal 7 mm diameter; the specification ensures standardised fit and mechanical engagement suitable for the intended tool-holder interface. Does the delivery include the fastening hardware needed for installation? Yes, the set content states that the screw is supplied with a matching nut, so separate purchase of the nut is not necessary for standard installation. Can this component be used as a maintenance spare to reduce setup time? The screw is designed as a replacement part to restore accurate height adjustment quickly, making it suitable for maintenance inventories aimed at reducing machine downtime. What is the article number for ordering and reference? The product is listed under article number 2000832423NW for ordering and internal documentation. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
M9 Height Adjustment Screw With Nut For Quick-Change Holder, Set - TECWERK
Take advantage of precise, repeatable height setting for quick-change toolholders combined with straightforward installation — the included nut simplifies assembly and reduces downtime. Order directly via Metav Werkzeuge or consult our specialists for compatibility checks. Height-adjusting screw size C (M9) – replacement for TECWERK quick-change holders Height-adjusting screw size C (M9) for fine height setting in quick-change toolholder systems and workshop applications. Compatible with TECWERK quick-change holders M9 metric thread for precise adjustment Delivered complete with locking nut Size C designation for standard holders Achieve consistent tool height with fine, metric adjustment The height-adjusting screw provides a reliable means of setting and repeating tool height in quick-change systems. With an M9 metric thread, the adjuster allows for small, controlled movements that translate into consistent cutting depths and improved part tolerances. As a spare part for toolholders, the component ensures that calibration and reassembly return the holder to its original datum quickly, reducing set-up variability and supporting higher first-pass quality. Fast replacement and reduced machine downtime Designed as a direct spare for all TECWERK quick-change holder variants, the threaded adjuster arrives complete with a locking nut, which simplifies installation and secures the adjustment under vibration. This configuration shortens maintenance cycles: the replacement is straightforward, the mechanical interface is standardised by the size C designation, and the preserved alignment reduces the need for lengthy recalibration. The practical result is less production interruption and faster return to productive machining. Procurement confidence and supply continuity Sourcing this replacement through Metav combines workshop practicality with a supply-chain advantage. Metav acts as a quality filter for the European market, offering a broad range of precision parts and supporting procurement consolidation. With a long-standing customer base and extensive product range, Metav provides assurance that this spare part is stocked and dispatched reliably, helping maintain production flow and relieving purchasing uncertainty. Contact Metav Werkzeuge today for compatibility confirmation or to order the TECWERK height-adjusting screw (SKU 2000832424NW); consultants are available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000832424NW Type designation: C Thread: M9 Manufacturer: TECWERK Product: Height-adjusting screw Set contents: includes nut Packaging unit: 1 Core specifications Thread size: M9 Size designation: C Packaging unit: 1 Special features Spare part for all TECWERK quick-change holder variants Function: height adjustment for toolholders Includes locking nut for secure setting SKU / UID: 2000832424NW FAQ Is this adjuster compatible with all TECWERK quick-change holders? Yes. The height-adjusting screw is specified as a spare part for all TECWERK quick-change holder variants and fits holders using the size C interface. What does the M9 designation mean for adjustment precision? The M9 thread denotes a metric threaded adjuster that enables fine, repeatable height settings; the thread pitch supports precise incremental movement for controlled tool height. Is the locking nut included and ready for installation? Yes. The delivery content for the height-adjusting screw explicitly states the set includes the locking nut, which secures the adjustment after setting. Can the adjuster be used to recover original tool height after maintenance? The threaded adjuster is intended for restoring precise tool height in quick-change systems, helping to return the holder to its original datum and minimising subsequent recalibration. What should be checked when replacing the height-adjusting screw? Verify the size designation (C) and the M9 thread match the quick-change holder; ensure the locking nut is tightened to secure the setting and confirm alignment before resuming production. Manufacturer / Responsible: NORDWEST Handel AG; Robert-Schuman-Straße 17; 44263 Dortmund
Spannfutter mit 4 Backen, vierkant und selbstzentrierend
Technische Daten: Bezeichnung: Spannfutter VHM Genauigkeit: 0,03 mm Abmessung: 165x215x96mm - 310x380x141mm Gewicht: 13,5 kg - 62,8 kg Klemmkraft: 1620 kgf - 900 kgf Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Vertex, der Hersteller in einigen Worten: Seit 1978 ist VERTEX der größte Hersteller für Maschinenteile in Taiwan. Mit einer beeindruckenden Produktionsfläche von über 15000 m² ist VERTEX in der Lage, große Mengen hochwertiger Maschinenteile herzustellen, um den Bedürfnissen der Kunden gerecht zu werden. Das Unternehmen hat sich auf Forschung und Entwicklung spezialisiert und ist stets bestrebt, innovative Designs zu entwickeln. Die hohe Lagerverfügbarkeit von 98% aller Artikel stellt sicher, dass die Kunden schnell und effizient bedient werden können. VERTEX hat sich einen hervorragenden Ruf aufgebaut, indem es qualitativ hochwertige Produkte liefert und gleichzeitig erstklassigen Kundenservice bietet. VERTEX ist der vertrauenswürdige Partner für Maschinenteile in Taiwan.
Spannfutter mit 6 Backen, selbstzentrierend
Technische Daten: Bezeichnung: Spannfutter VHM Durchmesser: 112 mm bis 167 mm Gewicht: 4,2 kg bis 9,2 kg Geschwindigkeit: 1200r.p.m. Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Das ist der Hersteller in einigen Worten: Seit der Gründung im Jahr 1978 hat sich VERTEX als eine der führenden Marken in der Branche etabliert. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen, um den steigenden Anforderungen der Kunden gerecht zu werden. Durch modernste Produktionsanlagen und fortschrittliche Fertigungstechnologien gewährleistet VERTEX die Herstellung präziser und langlebiger Produkte. Die Forschung und Entwicklung nimmt bei VERTEX einen hohen Stellenwert ein. Durch kontinuierliche Investitionen in innovative Technologien und Designverbesserungen bleibt VERTEX an der Spitze der Branche. Das engagierte Team von Experten bei VERTEX entwickelt ständig neue und verbesserte Designs, um die Leistung und Effizienz von Maschinen zu steigern. Ein weiterer herausragender Aspekt bei VERTEX ist die hohe Lagerverfügbarkeit. Mit einem beeindruckenden Bestand an Artikeln sind 98% aller Produkte sofort verfügbar. Dies ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und den reibungslosen Betrieb ihrer Maschinen sicherzustellen. Als stolzer Hersteller aus Taiwan steht VERTEX für höchste Qualität, Zuverlässigkeit und Kundenzufriedenheit. Die Kunden vertrauen darauf, dass VERTEX ihre Anforderungen versteht und ihnen Maschinenteile von höchster Qualität liefert, die den anspruchsvollen Standards gerecht werden. Interessenten sind herzlich eingeladen, VERTEX zu kontaktieren und mehr über die innovativen Produkte und den erstklassigen Service des Unternehmens zu erfahren. Das Team von VERTEX freut sich darauf, die individuellen Anforderungen der Kunden zu erfüllen und sie bei der Erreichung ihrer geschäftlichen Ziele zu unterstützen.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com