1000mm Independent Four-Jaw Chuck With 8-M20 T-Slots, 150 rpm - Vertex
Take advantage of the combination of high-capacity clamping, flexible centring and robust construction to keep large-part turning precise and productive. Order this workholding solution directly via Metav Werkzeuge or ask the consultants for tailored mounting and balancing options. VKC-40 independent four-jaw chuck – 1000 mm diameter, 150 rpm (Vertex) The VKC-40 is an independent four-jaw chuck designed for heavy-duty turning of large-diameter components in workshop and production environments. Robust 536 kg body for heavy work 1000 mm clamping diameter Independent jaws for flexible centring Large-diameter capacity for stable, precise turning The chuck offers a 1000 mm clamping diameter and a substantial mass that translates into stability during machining. With a rated rotational speed of 150 rpm, the solution is optimised for heavy, slow-speed turning where vibration damping and consistent contact pressures reduce chatter and rework. The substantial construction supports repeatable mounting and contributes to consistent precision across long production runs. Flexible centring that reduces setup complexity Featuring independent jaws, the workholding solution enables centring of asymmetrical or irregular components without relying on self-centring forces. This flexibility shortens setup time for bespoke workpieces and small series, while allowing precise, manual adjustment of each jaw. The specified T-nut 8-M20 interface provides a clear mounting standard for attachment and fixture integration, supporting varied clamping arrangements and accessory use. Robust design for continuous heavy-duty operation Built for demanding environments, the chuck combines a rugged construction with a form factor suited to large-part turning. The design prioritises secure clamping and mechanical endurance so that the workholding remains reliable under sustained loads. As a Vertex-manufactured workholding solution the unit is intended to integrate into production lines where predictable performance and longevity reduce downtime and overall machining costs. For technical clarification or to discuss mounting and balancing options with Metav Werkzeuge in Emmerich, please contact info@metav-werkzeuge.com or call +49 2822 7131930 for a personalised recommendation and delivery details. Technical data Article number: VKC-40 Brand: Vertex GTIN: 4061905094897 Facts Diameter: 1000 mm Maximum speed: 150 rpm Weight: 536 kg T-nut: 8-M20 Special features Independent four-jaw chuck Designed for large-diameter turning Robust construction for heavy-duty use FAQ What types of workpieces is this chuck suitable for? The VKC-40 independent four-jaw chuck is designed for large and heavy workpieces, especially where individual jaw adjustment is required for irregular shapes. What is the maximum workpiece diameter? The chuck accepts a clamping diameter of up to 1000 mm. Can irregular or off-centre parts be reliably centred? Yes, the independent jaws allow flexible centring and individual adjustment for asymmetrical components. What rotational speed is specified for this chuck? The rated maximum speed is 150 rpm, suited to heavy-duty turning operations. How is the chuck mounted to a machine table or faceplate? Mounting uses a T-nut configuration specified as 8-M20 for fixture attachment and integration. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
100mm Centre Cone MK4 Taper 60° Sharp Tip, Housing Ø64mm, Max Workpiece 800kg - RÖHM
Benefit from a robust combination of a Morse taper MK4 shank, a 60° point angle and a 100 mm projection for secure centring of heavier workpieces; the 64 mm housing and 800 kg load rating deliver dependable support during machining. Order the centre cone directly via Metav Werkzeuge or consult our specialists for application advice. Zentrierkegel MK4 A.-L.100mm — Centre cone, MK4 Morse taper, 60° point angle (RÖHM) The Zentrierkegel MK4 A.-L.100mm is a Morse-taper centre cone designed for precise support and rotation of medium to heavy workpieces in turning and inspection applications Morse taper MK4 shank 60° precision point angle 100 mm projection for deep centres Supports up to 800 kg workpieces Stable support for heavier turning operations A centre cone with a Morse taper MK4 shank provides a secure seating in the spindle or tailstock, reducing axial play and improving concentricity during turning. The 100 mm projection permits access to recessed centres while the 64 mm housing diameter increases the bearing surface, resulting in more consistent rotation under load. With a specified 800 kg maximum workpiece rating, this component is suitable where robust, repeatable centring is essential; the clear numeric limits simplify risk assessment and setup planning for production and workshop tasks. Precision geometry that improves concentricity and inspection The 60° point angle is a standard geometry for centring cones, offering a well-defined contact zone that balances penetration and support. A sharper or flatter angle would change seating behaviour; the 60° form concentrates load at a predictable apex, which helps to reduce runout and improves repeatability in measurement and machining processes. For operations requiring close tolerance alignment, the precise apex profile and slim pointed form contribute to stable datum formation and easier subsequent machining or metrology tasks. Workshop-ready design for reliable daily use Constructed for mechanical compatibility and straightforward mounting, the taper shank format ensures rapid fitting and removal without special adapters. The combination of a standard Morse taper and a compact housing results in a component that works with common centres and tailstocks while offering the mechanical strength to handle heavier assemblies. Regular inspection of the contact surfaces and correct seating are sufficient to maintain service life; the uncomplicated design keeps maintenance minimal while delivering dependable centring under continuous workshop conditions. For genuine RÖHM centring components and application guidance, contact Metav Werkzeuge in Emmerich for tailored advice and ordering: info@metav-werkzeuge.com or phone +49 2822 7131930 — our specialists will recommend the right configuration for the task. Technical data Article number: 4000832106NW Designation: Centre cone (Zentrierkegel MK4 A.-L.100mm) Manufacturer: RÖHM Packaging unit: 1 Facts Projection: 100 mm Point angle: 60° Housing diameter: 64 mm Max. workpiece weight: 800 kg Taper shank: MK4 Special features Pointed slim cone profile (spitz) Morse taper MK4 shank for secure seating Suitable for centring and turning applications Clear numeric load rating for workshop planning FAQ Is the taper compatible with standard Morse taper sockets? The centre cone uses a Morse taper MK4 shank and is compatible with standard MT4 sockets, ensuring straightforward fitting in widely used spindles and tailstocks. What is the maximum workpiece weight for safe use? The specification states a maximum workpiece weight of 800 kg for this RÖHM centre cone (SKU 4000832106NW), which serves as the design limit for stable centring in normal machining conditions. How does the 60° point angle affect centring performance? A 60° point angle provides a predictable contact apex that improves concentricity and repeatability, helping to reduce runout during turning and facilitating accurate inspection set-ups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Four-Jaw Independent Lathe Chuck 2300r.p.m., 3.5kg - Vertex
Take advantage of the combination of independent jaw control, a 100 mm clamping diameter and a 2300 rpm rating to streamline small-batch turning operations; order the VKC-4 directly via Metav Werkzeuge or consult our specialists for integration advice. VKC-4 – independent four-jaw chuck, 100 mm diameter, 2300 rpm The VKC-4 independent four-jaw chuck is a compact clamping solution for versatile turning applications in workshops and small production lines, providing flexible gripping for irregular and standard workpieces. Independent jaw adjustment for asymmetric parts 100 mm clamping diameter for compact workpieces Rated for up to 2300 rpm operation Compact, low-inertia mass of 3.5 kg Accurate gripping for irregular shapes and precision turning The independent jaw mechanism delivers true flexibility: each jaw can be adjusted separately to centre off‑axis or irregular workpieces without additional fixtures. This design simplifies seating of non-cylindrical parts and reduces the number of secondary operations required. The independent jaws support controlled clamping forces while maintaining concentricity, which helps to shorten cycle times and improve machining outcomes for short runs and bespoke components. With a 100 mm clamping diameter, the unit suits smaller workpieces commonly encountered in toolrooms and craft workshops. Stable performance that speeds up set-up and repeatability A compact mass of 3.5 kg contributes to low rotational inertia, which assists quicker spin-up and stable running at the specified maximum of 2300 rpm. The chuck’s balance and construction promote consistent seating of parts, enhancing repeatability between set-ups. Fewer adjustments are required over successive parts, so throughput improves without sacrificing quality. These operational efficiencies translate directly into measurable time savings on the shop floor and a more predictable production rhythm. Designed for workshop integration and flexible production The VKC-4 is aimed at small to medium workshops and independent turners who need adaptable clamping without complex fixturing. The compact form factor allows easy handling and fast tool changes, making it well suited to short-series production, prototyping and repair work. By enabling quick reconfiguration for different part geometries, the chuck supports efficient job switching and reduces idle machine time. Emphasis on practical functionality ensures the component contributes to smoother workflows and better resource utilisation. Practical maintenance for long service life Routine inspection and basic maintenance preserve clamping accuracy and operational safety. Accessible jaw adjustment points and a straightforward layout make cleaning and occasional lubrication simple tasks for in‑house technicians. Regular checks for jaw wear and runout keep performance predictable and reduce the likelihood of unscheduled downtime. The design encourages a pragmatic maintenance routine that supports ongoing productivity and prolongs service intervals. Contact Metav Werkzeuge to discuss supply options and technical compatibility for the Vertex VKC-4 independent four-jaw chuck, or request tailored advice from our consultants at Metav Werkzeuge. Technical data Article number: VKC-4 GTIN: 4061905083822 EClass: 21020490 Manufacturer: Vertex Facts Clamping diameter: 100 mm Maximum speed: 2300 rpm Mass: 3.5 kg T-slot/thread detail: 4-M8 Special features Independent jaw adjustment Compact design for small workpieces Suitable for workshop and short-series use FAQ What workpieces are best suited to this chuck? The VKC-4 independent four-jaw chuck is particularly effective for irregular, square or otherwise non-cylindrical workpieces where separate jaw adjustment enables precise seating. Is 2300 rpm the safe operating limit for the chuck? Yes, the specified maximum operating speed of 2300 rpm defines the safe rotational limit for this Vertex VKC-4 chuck; adherence ensures reliable performance. How does the independent jaw setup improve workflow? Independent jaws allow individual positioning to centre asymmetrical parts quickly, reducing fixture time and improving process throughput with the VKC-4 chuck. What maintenance is recommended to retain accuracy? Periodic cleaning, inspection for jaw wear and light lubrication of moving parts will keep the VKC-4 chuck running accurately and help extend service life. Can the chuck be used for short-series production? The compact form and rapid reconfiguration capability make the VKC-4 well suited to short-series production and frequent job changes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
102.5mm Centre Point MK4 With Live Spindle Support, 60° Tip, 800 kg Workpiece Capacity - TECWERK
Take advantage of a high-capacity, precision rotating centre that combines reliable runout control and robust load capacity for smoother turning operations. With a compact 70 mm housing and a 60° tip, this centre delivers repeatable axial guidance and supports heavy workpieces while keeping spindle speeds up to 2,700 rpm. Order directly via Metav Werkzeuge or consult the team for application-specific advice. Rotating live centre MT4 (32 mm) by TECWERK — 60° tip, 2,700 rpm max The Rotating live centre MT4 (32 mm) is a heavy-duty lathe support designed for axial centring of turned components, offering high load capacity and fine radial accuracy for demanding workshop and light industrial turning applications. Live centre MT4 with 60° tip angle Max. workpiece load 800 kg capacity Runout ≤ 0.005 mm for precision Max. speed 2,700 rpm; 70 mm housing Stability and precision for heavy turning Acentre that keeps parts concentric under load reduces rework and shortens cycle times. The runout ≤ 0.005 mm specification ensures tight radial control, which translates into finer surface finish and consistent diameters when machining shafts or large rings. The 60° tip is a proven geometry for secure seating in standard centres, and the specified 800 kg maximum workpiece support means less risk of deflection during facing or turning operations. For workshops aiming to improve first-pass yield, this rotating centre brings measurable gains in machining accuracy. Robust construction for continuous operation Built around a compact 70 mm housing and a solid shank execution, the unit withstands sustained spindle activity without compromising stability. The combination of a substantial 31.267 mm shaft diameter and a projection of 102.5 mm gives a favourable stiffness-to-length ratio for common lathe setups. Rated for up to 2,700 rpm, the centre suits many standard turning speeds while the measured tip length of 41 mm provides sufficient contact depth for secure engagement. These attributes reduce vibration and support longer tool life through steadier cutting conditions. Compatibility and workshop efficiency Designed for MT4 (Morse taper 4) spindles, the centre fits conventional tailstock and live-centre arrangements without additional adaptors, simplifying changeovers. The compact form and standard interface help reduce setup time and allow rapid integration into existing turning processes. Clear numerical specifications make process planning straightforward: spindle speed limits, permissible workpiece mass and dimensional data enable quick verification of suitability for specific jobs. For buyers seeking a balance of durability and measurable performance, this component offers a practical upgrade to centre tooling. For tailored advice on integrating the TECWERK rotating live centre into production or to arrange supply from Metav Werkzeuge, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical guidance and same‑day dispatch options. Technical data Article number: 2000832042NW Label: Zentrierspitze MK4 mitlfd.TECWERK Manufacturer: TECWERK Facts Diameter: 32 mm Projection: 102.5 mm Weight: 2.3 kg Tip angle: 60° Shaft diameter: 31.267 mm Max. workpiece weight: 800 kg Runout (max.): 0.005 mm Max. speed: 2,700 min⁻¹ Housing diameter: 70 mm Tip length: 41 mm Special features Shank execution: MT4 Product type: Rotating live centre Packaging unit: 1 FAQ What materials and machines is this centre suited for? The TECWERK rotating live centre is intended as axial support for turning operations on lathes and is compatible with conventional workpiece materials where a 60° seating is appropriate; the technical data such as runout ≤ 0.005 mm and 800 kg load rating guide machine selection. How does the runout specification affect machining quality? A low runout value (0.005 mm) on the rotating centre reduces concentricity errors during turning; when the TECWERK centre is used, parts typically exhibit improved diameter consistency and surface finish, which lowers scrap rates. Is the shank compatible with standard tailstocks? Yes, the shank execution is MT4, making the unit compatible with tailstocks and live‑centre adaptors designed for Morse taper 4 interfaces without further modification. Can the centre be used at high spindle speeds? The component is rated for a maximum of 2,700 rpm; operating within this limit maintains the specified accuracy and service life for the TECWERK rotating live centre. What are the dimensional considerations for setup? Key dimensions to verify during setup include the projection (102.5 mm), housing diameter (70 mm) and shaft diameter (31.267 mm) to ensure correct seating and clearance in the lathe tailstock and any workholding fixtures. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
106mm Centre Point Slim MK5 With 60° Tip, 0.01mm Runout, 1600kg Workpiece Capacity - RÖHM
Take advantage of the combination of precise concentric support, a slim profile for confined tailstock spaces and high load capacity to maintain throughput and reduce rework; order directly via Metav Werkzeuge or ask the consultants for further application advice. Slim Centre Point MK5 — 30 mm, 60° point angle, RÖHM The Slim Centre Point MK5 is a slim live centre designed for lathe support and accurate workpiece centring in medium to heavy turning operations. Slim profile for confined tailstocks High load capacity 1600 kg Precise runout ≤ 0.01 mm Suitable for speeds up to 4,300 rpm Delivering repeatable concentricity for precision turning The slim centre provides a stable contact geometry that translates directly into consistent concentricity on turned components. With a specified runout ≤ 0.01 mm, the centre reduces scrap and minimises secondary finishing, which improves overall process economy. The 30 mm tip diameter and 60° point angle give a clear seating for a wide range of workpieces, supporting predictable turning results even where tight tolerances are required. Access and ergonomics for constrained setups A compact profile frees up clearance at the tailstock and enhances accessibility when machining long or complex parts. The combination of a slim design and a projection of 106 mm supports work on longer spindle overhangs without obstructing tooling, while the housing diameter of 58 mm and 34 mm tip length ensure a low-profile fit. The reduced bulk around the spindle makes setups faster and simplifies loading in confined work envelopes. Built to cope with demanding loads and speeds Engineered for robust performance, the centre accepts substantial radial load with a maximum workpiece weight of 1,600 kg and is rated for speeds up to 4,300 rpm, allowing stable operation during higher-speed turning cycles. The solid construction and a gross weight of 2.6 kg contribute to operational stability, enabling longer runs and fewer interruptions for inspection or reorientation. Easy integration and low-maintenance operation Fitted for a Morse taper MK5 mounting, the centre offers straightforward installation into standard MT5 tailstocks and adaptors. The MT5 taper and precise shaft diameter of 44.399 mm provide reliable engagement and repeatable seating. With a clear specification for tip geometry and runout, maintenance becomes a matter of routine inspection rather than complex recalibration, keeping machine downtime to a minimum. For secure spindle support and reliable centring, request the RÖHM Slim Centre Point MK5 via Metav Werkzeuge in Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 to confirm compatibility and stock availability Technical Data Article number: 4000832078NW Manufacturer: RÖHM Product type: Centre point Label: Slim Centre Point MK5 RÖHM Facts Tip diameter: 30 mm Projection: 106 mm Tip length: 34 mm Shaft diameter: 44.399 mm Housing diameter: 58 mm Max workpiece weight: 1,600 kg Max speed: 4,300 min⁻¹ Runout deviation: max. 0.01 mm Point angle: 60° Weight: 2.6 kg Special features Type: Slim Shaft execution: MK5 (Morse taper MT5) Packaging unit: 1 Slim profile for restricted tailstock spaces Designed for lathe centring operations FAQ What maximum workpiece weight can this centre support? The Slim Centre Point MK5 is specified for a maximum workpiece weight of 1,600 kg and is suitable for demanding turning tasks. Which taper is required to fit this centre into a tailstock? The centre is supplied with an MK5 shaft execution, corresponding to a Morse taper MT5 mounting for direct installation. What accuracy can be expected in terms of runout? The product is specified with a runout deviation of max. 0.01 mm, ensuring high concentric accuracy for precision turning. Is the centre suitable for higher spindle speeds? Yes, the Slim Centre Point MK5 is rated for operation up to 4,300 rpm, making it appropriate for many medium- to high-speed turning applications. What is the point geometry of the centre tip? The centre features a 60° point angle with a 30 mm tip diameter, providing a secure seating for a wide range of workpiece profiles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
108mm Universal Centre With Running Tailstock, Accuracy 0.005mm, 3200r.p.m. - Vertex
Take advantage of precise, high-speed centring combined with robust alloy construction for consistent turning results; secure supply and expert advice directly via Metav Werkzeuge or request consultation for application-specific guidance. VPC‑MT1 Live Centre — 108 mm, 3200 r.p.m., Vertex The VPC‑MT1 is a revolving live centre designed to support turning operations in workshop lathes, offering high concentricity and dependable running at elevated spindle speeds. High precision 0.005 mm runout Alloy steel construction for longevity Suitable for 3200 r.p.m. turning Compact 108 mm overall length Maintain concentricity with measurable precision The live centre delivers a 0.005 mm accuracy which directly reduces vibration and runout during rotation; this measurable performance improves surface finish and lowers scrap rates in repetitive turning tasks. A revolving support that maintains concentricity enables higher machining consistency, meaning fewer reworks and predictable tolerances for production batches. The specification of 3200 r.p.m. confirms suitability for moderate high-speed applications where stability and repeatability are priorities. Built for sustained use in workshop environments Constructed from alloy steel, the component offers enhanced wear resistance compared with standard steel alternatives, extending service life under regular use. The rotating tip is designed to follow the workpiece rotation, reducing friction and heat build-up at the contact point. This results in reduced maintenance intervals and a lower risk of premature failure, which contributes to improved uptime on the shopfloor and reliable daily performance. Compact form that simplifies setups and throughput With an overall length of 108 mm and a weight of 0.3 kg, the revolving centre is compact and easy to handle within confined lathe applications. The small footprint supports flexible fixturing and helps maintain clearance in multi-operation setups. Practical benefits include simplified changeovers and consistent centring across short-run and batch production, providing operational efficiency without sacrificing robustness. Choose the Vertex live centre for reliable high-speed centring — contact Metav Werkzeuge for tailored application advice and assured European supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: VPC‑MT1 GTIN: 4061905083600 Product: Universal centre, revolving Core specifications Length: 108 mm Maximum speed: 3200 r.p.m. Accuracy: 0.005 mm Weight: 0.3 kg Materials & features Material: alloy steel Type: live / revolving centre Brand: Vertex FAQ Is the live centre suitable for high-speed turning? The VPC‑MT1 is specified for operation up to 3200 r.p.m., making this revolving centre suitable for many high-speed turning tasks where maintained concentricity is required. What level of concentricity can be expected? The device provides an accuracy of 0.005 mm, which supports tight concentricity demands and contributes to improved surface finish during turning operations. What material is the centre made from and what are the benefits? Manufactured from alloy steel, the centre combines toughness with wear resistance, offering prolonged service life under regular workshop use. Is the VPC‑MT1 easy to handle and install in standard setups? The compact 108 mm length and light weight (0.3 kg) allow straightforward handling and integration into space-limited lathe setups without complex adjustments. Which brand produces this live centre? This revolving centre is produced by Vertex and supplied under the designation VPC‑MT1 for workshop and industrial turning support. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
112mm Quick-Change Tool Holder Head D1 With Eccentric Clamp, Hardened 40-Tooth 9° Indexing - TECWERK
Benefit from rapid tool changes, secure eccentric clamping and a proven 0.01 mm repeatability for stable, high-throughput machining. The hardened and ground contact surfaces extend service life while 40 indexing positions allow fast retooling at 9° increments — order directly via Metav Werkzeuge or consult our specialists for application-specific advice. TECWERK Quick-change Toolholder Head Gr. D1 — 40-position indexing, 40 mm bore A TECWERK Quick-change Toolholder Head Gr. D1 designed for fast swaps of cutting tools in lathe and CNC toolpost systems, featuring eccentric clamping and industrial-grade repeatability. Eccentric clamp for secure rapid tool change Repeatability to 0.01 mm for consistent results 40-position indexing with 9° increments Hardened, ground gear and contact surfaces Reduce downtime with faster, repeatable tool changes The quick-change head uses an eccentric clamping mechanism to lock cutters reliably, enabling significantly reduced tool-change time compared with conventional fixtures. Because the system delivers a repeatability of 0.01 mm, process variation is minimised and set-up time for recurring operations is cut. Eccentric clamping converts a short lever action into strong radial force, so the head holds the cutting insert or holder firmly without complex tightening sequences — a practical advantage on busy turning centres and manual lathes where cycle time matters. Flexible indexing and precise height adjustment for versatile set-ups With 40 teeth in the indexing ring, each position corresponds to a 9° increment, allowing a wide range of tool angles without disassembly. The central bore of 40 mm accepts the mounting body, and three maximum overhang options (112 / 116 / 124 mm) permit selection according to reach and rigidity requirements. Tip height is set via a dedicated adjustment screw on the toolholder, which simplifies achieving correct centre height and avoids repeated scraping or shimming — an essential feature for shops that switch between facing, turning and profiling operations. Hardened components for durable accuracy and low maintenance The gearing and mating contact faces are hardened and ground, ensuring long-term resistance to wear and preserving datum accuracy even under repetitive indexing cycles. This construction reduces the need for frequent regrinding or replacement, supporting predictable maintenance intervals and lower lifetime cost of ownership. Built to integrate into workshop tool systems, the head is suited for demanding production environments where repeatable alignment and robust clamping determine part quality and process stability. For tailored advice on selecting the right TECWERK quick-change head for specific machines and to arrange supply from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 for expert support. Technical Data Article number: 2000832154NW Type: D1 Designation: Quick-change toolholder head Gr. D1 Brand: TECWERK Facts Bore diameter: 40 mm Index positions: 40 Index increment: 9° Repeatability: 0.01 mm Maximum overhang: 112 / 116 / 124 mm Packaging unit: 1 Special features Eccentric clamping for rapid tool changes Tip height adjustable via set screw at the holder Hardened and ground gear and contact surfaces 40-position indexing for multiple tool angles FAQ Is the quick-change head compatible with standard toolposts? Compatibility depends on the toolpost and mounting body interface; the TECWERK Quick-change Toolholder Head Gr. D1 is designed around a 40 mm bore and common D1-type interfaces, so matching the mounting shank or adapter is required for direct fitment. How precise is the indexing and how is it achieved? Indexing is achieved by a 40-tooth ring giving 9° increments; the mechanism provides secured positions and, together with the hardened contact faces, supports the stated 0.01 mm repeatability during re-clamping. Can the tip height be fine-tuned after installation? Yes, the tip height on the quick-change holder is adjusted by a set screw on the toolholder, enabling fine height correction without removing the head from the machine. What are the implications of the different maximum overhangs? Choosing between 112, 116 or 124 mm overhang balances reach against rigidity: shorter overhangs improve stiffness and reduce deflection, while longer overhangs permit greater access to larger workpieces. Is the head suitable for heavy-duty production use? The hardened, ground gear and main contact surfaces are specified for extended wear resistance, making the head well suited to repetitive production tasks where durable accuracy is required. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
112mm Self-Centring 6-Jaw Chuck High Speed 1200r.p.m. - Vertex
Take advantage of reliable, fast clamping through the combination of a six-jaw, self-centring design and a 112 mm clamping diameter for consistent production results; order via Metav Werkzeuge or consult the technical team for machine-specific integration. VAS-4 Vertex six-jaw self-centring chuck, 112 mm, 1,200 rpm A VAS-4 six-jaw, self-centring chuck engineered for precise clamping in machining and assembly environments 112 mm clamping diameter Six-jaw self-centring design Rated up to 1,200 rpm Robust build at 4.2 kg High-performance clamping for steady throughput The primary design focus is repeatable clamping accuracy under production conditions. The six-jaw layout provides even force distribution around the workpiece, which reduces vibration and enhances concentricity compared with fewer-jaw solutions. Rated for up to 1,200 rpm, the chuck supports efficient spindle speeds while maintaining secure holding power. Built to be compact yet substantial, the device’s 4.2 kg mass contributes to mechanical stability during machining cycles, thereby improving final part quality. Precision mechanics that simplify setup and increase uptime A self-centring jaw system reduces the need for repeated manual alignment, shortening setup times and lowering the risk of misalignment during batch runs. The 112 mm diameter accommodates a range of common part sizes while the six-jaw configuration enables uniform gripping force, which helps to protect delicate surfaces and maintain dimensional tolerances. For environments where repeatability matters, this clamping solution offers a straightforward method to improve process consistency and reduce scrap rates. Designed for dependable operation and straightforward maintenance Mechanical simplicity is a key benefit: the chuck’s construction prioritises long service intervals and predictable behaviour under load. The robust components support everyday industrial use, and the accessible design facilitates inspection and routine lubrication without complex disassembly. Using a well-engineered clamping device reduces unplanned downtime and contributes to a more productive workflow, translating directly into lower operational costs over the long term. Confidence through partnership and practical service Choosing this Vertex clamping solution brings both a technical benefit and a reliable supply route: the product is available through Metav Werkzeuge, which provides a wide selection of precision tools and a practical logistics base in Emmerich. For procurement planning and integration into existing tool inventories, expert advice from the supplier helps ensure the chuck matches machine interfaces and process requirements, supporting a smooth commissioning phase. For specification confirmation or tailored advice on integrating the Vertex VAS-4 into a production cell, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options. Technical data Article number: VAS-4 GTIN: 4061905083754 Brand: Vertex Product type: chuck Facts Diameter: 112 mm Max. speed: 1,200 rpm Weight: 4.2 kg Special features Six-jaw, self-centring Precision clamping for machining applications Compact, robust construction FAQ What is the maximum rotational speed for this chuck? The chuck is rated for up to 1,200 rpm; this limit should be observed to maintain optimal clamping performance of the VAS-4 Vertex chuck. Is the chuck self-centring and what benefit does that provide? Yes, the VAS-4 is a six-jaw, self-centring unit; the feature reduces setup time and improves concentricity across production batches. Which clamping diameter does the chuck support? The chuck provides a nominal clamping diameter of 112 mm, suitable for a wide range of standard workpieces. How heavy is the chuck and why does weight matter? The device weighs 4.2 kg; the mass contributes to mechanical stability and helps dampen vibration during machining. Can this chuck be used for precision production runs? Designed for repeatable clamping, the VAS-4 Vertex chuck is suited to precision production where consistent concentricity and minimal setup variation are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
114,5mm Centre Point HVL Pro MK4 Extended Live Centre 60° Runout 0.005mm, 3800 rpm - RÖHM
Robust centring performance with measurable stability: the HVL Pro MK4 delivers a 60° tip and runout of ≤ 0.005 mm, engineered for demanding turning tasks under loads up to 500 kg. Benefit from a MK4 taper for simple integration and a 114.5 mm overhang for flexible setup. Order the centring point directly via Metav Werkzeuge or contact our consultants for tailored application advice. HVL Pro MK4 centring point (Pro precision version, extended running tip) – 60° tip, MK4 shank – RÖHM HVL Pro MK4 centring point — a pro precision execution with an extended running tip, designed for heavy-duty turning and high-accuracy centring in workshop and production environments Precision runout ≤ 0.005 mm Supports workpiece weight up to 500 kg MK4 shank, 31.267 mm diameter 60° tip angle for reliable centring Maintain tolerances with measurable precision The primary advantage of this live centre is its repeatable accuracy: a maximum runout deviation of 0.005 mm ensures parts remain within tight tolerances cycle after cycle. The 60° tip geometry concentrates clamping force for secure centring, while the 53 mm tip length supports consistent contact with the workpiece. Such measurable performance reduces rework and inspection time, making the component a pragmatic choice where dimensional conformity is critical. Stable machining under heavy loads Designed for robust operation, the unit is specified for a maximum workpiece weight of 500 kg and a permitted speed up to 3,800 rpm, combining load capacity with controlled rotational performance. The 68.5 mm housing diameter and a total overhang of 114.5 mm contribute to mechanical stability, reducing vibration and improving surface finish. These characteristics translate into fewer rejects and steadier cycle times on medium to heavy turning applications. Easy integration and secure mounting on standard spindles Fitted with a MK4 Morse taper and a shank diameter of 31.267 mm, the centring point installs quickly in machines accepting Morse taper 4 interfaces. The overall weight of 2.3 kg and a compact housing mean minimal disturbance to balance while offering robust support. Compatibility with common machine spindles and straightforward mounting simplifies changeovers and shortens setup time, which benefits throughput and machine utilisation. Proven partner for workshop reliability Beyond technical performance, the product is backed by Metav’s positioning as a supply and quality filter for the European market: a broad stock range from Emmerich, reliable logistics and a history of trusted service support consistent operations. The combination of high-precision mechanics and dependable distribution helps maintain continuous production flow and reduces procurement complexity for workshops and small-scale manufacturers. For precise centring under heavy load, request the RÖHM HVL Pro MK4 centring point from Metav Werkzeuge to confirm fitment and delivery from our Emmerich hub Technical Data Article number: 4000832083NW Product name: HVL Pro MK4 centring point (Pro precision version, extended running tip) Manufacturer: RÖHM Product type: Centring point Core dimensions & performance Diameter: 32 mm Overhang: 114.5 mm Tip angle: 60° Tip length: 53 mm Housing diameter: 68.5 mm Shank diameter: 31.267 mm Weight: 2.3 kg Max. workpiece weight: 500 kg Runout deviation max.: 0.005 mm Max. speed: 3,800 rpm Shank type: MK4 Packaging unit: 1 Special features Pro precision execution Extended running tip Suitable for heavy-duty turning Designed for repeatable centring accuracy FAQ How precise is the centring performance? The HVL Pro MK4 centring point achieves a runout deviation of max. 0.005 mm, providing the repeatability required for tight-tolerance turning operations; SKU 4000832083NW identifies this specification. What maximum workpiece weight can be handled? This centring point is specified for workpiece masses up to 500 kg, enabling stable support for medium and heavy components during turning operations. Which spindle interface is required? The unit uses a MK4 (Morse taper 4) shank with a diameter of 31.267 mm, suitable for machines accepting MT4 connections and ensuring straightforward integration. Is the live centre suitable for higher speeds? The component is rated for operation up to 3,800 rpm; for applications beyond this speed, rotational dynamics and machine compatibility should be reviewed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
115.5mm Live Centre MK5 Conical Tip 60° Angle, 78mm Body Diameter - RÖHM
Take advantage of a robust MK5 taper and a 115.5 mm overhang to achieve fast, repeatable centring of heavy components while keeping setup times low; order the RÖHM centring cone directly via Metav Werkzeuge or ask the consultants if needed. RÖHM Centring Cone MK5 — 115.5 mm overhang, 60° cone angle The RÖHM Centring Cone MK5 is a precision clamping accessory for aligning heavy workpieces on lathes and machining centres, designed to ensure reliable axial location and stable support during turning operations MK5 taper for standard spindle interfaces 115.5 mm overhang for deep centring tasks 60° pointed cone for precise axial alignment Rated for workpieces up to 1,600 kg Faster setup and consistent axial alignment for machining centres The engineered geometry of the centring tool reduces repositioning and trial cuts, enabling more efficient cycles. With a defined 60° cone angle and a pointed form, the component creates a repeatable contact point that converts radial play into a single, predictable datum. The MK5 taper secures the tool into the spindle with standardised fit, so the combination of MK5 and the 115.5 mm overhang provides a dependable balance between reach and rigidity. This results in measurable time savings on medium and heavy turning tasks while maintaining dimensional control. Robust contact surface for heavy-duty turning and stability Built to take substantial loads, the centring cone supports a maximum workpiece mass of 1,600 kg, which allows its use with large chucks and heavy assemblies. The broad housing with a 78 mm diameter distributes reaction forces and reduces local stress on the spindle nose, improving runout behaviour during contact. Thanks to the pointed cone geometry, axial alignment is achieved with minimal radial offset, improving concentricity and contributing to consistent finishing without repeated adjustments. Reduced rework through defined taper and repeatability The standardised MK5 taper guarantees a tight mechanical interface that resists micro-movement under cutting forces, lowering the likelihood of chatter and surface defects. The precise cone angle and hard seating mean that once the component is located, positional drift is limited; this reliability translates directly into fewer scrapped parts and less rework. For workshop planners, the clear specification of taper, overhang and cone angle simplifies fixture selection and process documentation. Practical considerations: integration, inspection and handling Integration into an existing toolset is straightforward owing to the industry-standard taper and compact housing. Routine inspection focuses on the cone tip and taper seating for wear or burrs; addressing minor damage early maintains the precision of axial location. The simple mechanical design minimises service complexity—when inspections indicate wear beyond allowable tolerance, replacement restores original performance quickly. Packing and transport information note the item is supplied as a single unit for controlled inventory and traceable fitting. For precision centring tasks with demanding loads, choose the RÖHM centring cone MK5 and contact Metav Werkzeuge for ordering and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number (SKU): 4000832107NW Product type: Centring cone Brand: RÖHM Facts Overhang: 115.5 mm Cone angle: 60° Housing diameter: 78 mm Max. workpiece weight: 1,600 kg Special features Taper design: MK5 Pointed cone form for axial centring Packaging unit: 1 FAQ What spindle interfaces is this centring cone compatible with? The RÖHM centring cone MK5 (SKU 4000832107NW) fits standard MK5 spindles and is intended for machines accepting that taper class. How heavy a workpiece can be centred with this tool? The centring cone is specified for workpieces up to 1,600 kg, offering a stable solution for heavy-duty turning operations. Is the cone geometry suitable for high-precision finishing? Yes, the 60° pointed cone profile provides a consistent axial datum, supporting high repeatability and improved concentricity in finishing passes. What inspections are recommended to maintain centring accuracy? Regular visual and tactile checks of the cone tip and MK5 seating are recommended; any detectable deformation or burrs should prompt repair or replacement to preserve precision. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
119mm Centre Point Slim Extended Pilot Tip 60° MK5 With 51.5mm Tip Length, Max 1400kg Workpiece; Ø58mm Housing - RÖHM
Take advantage of precise runout of 0.01 mm, a 1,400 kg load rating and the MK5 taper for consistent, heavy-duty supported turning; order the RÖHM live centre directly via Metav Werkzeuge or consult our specialists for application advice. RÖHM Live Centre Slim MK5 with Extended Pilot — 60° Tip, MK5 Taper The RÖHM Live Centre Slim MK5 with extended pilot is a lathe centre engineered for precision, supporting heavy workpieces while maintaining low runout and allowing access in confined fixtures. Slim design for restricted access Supports up to 1,400 kg axial load Runout max. 0.01 mm for precision Max. 4,300 rpm for high-speed turning Achieve consistent concentricity in critical turning High-precision applications demand reproducible positioning and minimal deviation. The slim centre delivers a runout of 0.01 mm, which reduces rework and measurement scatter in turned parts. The 60° tip angle and defined tip length ensure stable contact and repeatable alignment during through-centre support, translating technical accuracy into fewer setup iterations and higher first-pass yield. Secure heavy components without compromise For heavy-duty support, the combination of robust construction and rated capacity matters. The unit is specified for a maximum workpiece weight of 1,400 kg, providing the structural basis for supporting large shafts and rings during finishing or rough-turning operations. The centre’s bearing and housing dimensions contribute to load distribution, so machining cycles remain stable and tool life is preserved. Maintain access in restricted bores and fixtures A slim profile with an extended pilot length of 51.5 mm enables engagement in deeper centres and narrow workpiece geometries where standard centres cannot reach. The compact housing diameter of 58 mm and projection of 119 mm minimise interference with tooling and allow closer approach of cutting tools, improving chip evacuation and enabling more flexible clamping strategies on compact lathes. Integrate with common machine tapers and speeds The live centre fits an MK5 shank and presents a shank diameter of 44.399 mm, facilitating direct compatibility with standard taper adaptors and collet fixtures. Rated for up to 4,300 rpm, it supports a broad range of turning speeds from coarse to finish operations while its overall weight of 2.6 kg keeps inertia low for responsive dynamic behaviour. These attributes simplify retrofitting into existing shops and reduce the need for special adaptions. Discuss MK5 compatibility or application-specific requirements with Metav Werkzeuge — our consultants at Metav Werkzeuge can advise on mounting options and delivery from Emmerich, phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000832087NW Brand: RÖHM Product type: Live centre (Zentrierspitze) Type designation: Slim - extended pilot Packaging unit: 1 Facts Projection: 119 mm Tip diameter: 30 mm Tip angle: 60° Tip length: 51.5 mm Max. workpiece weight: 1,400 kg Max. runout: 0.01 mm Max. speed: 4,300 rpm Housing diameter: 58 mm Shank diameter: 44.399 mm Weight: 2.6 kg Special features Shank execution: MK5 Slim design with extended pilot Intended for supported turning of heavy workpieces Label: Zentrierspitze Slim MK5 mitlfd.m.verl.Laufspitze RÖHM FAQ What level of concentricity can be expected with this live centre? The RÖHM live centre Slim MK5 delivers a runout specification of 0.01 mm, which supports high-precision turning and repeatable part quality when the centre is used under the stated conditions. Is the slim pilot suitable for deep-diameter workpieces? Yes, the extended pilot length of 51.5 mm is designed to reach deeper centres and provide stable support in narrow bore geometries while maintaining alignment. Which machine taper is required for mounting this centre? The unit is supplied with an MK5 shank execution and a shank diameter of 44.399 mm, allowing direct insertion into compatible MK5 spindles or adaptors. What is the maximum rotational speed for reliable operation? The live centre is rated for up to 4,300 rpm; operating within this limit ensures bearing life and positional stability. Can this centre support very heavy workpieces? The design specification lists a maximum supported workpiece weight of 1,400 kg, making it suitable for substantial components when used with appropriate machine support. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
120mm Toolholder For Steel Holder Head B With 40mm Cylindrical Bore, Quick-Change Compatible - TECWERK
Benefit from the robust quick-change design with a 40 mm cylindrical bore and a 120 mm overall length for reliable clamping and faster setup cycles; order the holder directly via Metav Werkzeuge or consult the team for application-specific advice. TECWERK Quick-change holder (for Steel Holder Head B) — 40 mm cylindrical bore, 120 mm length The TECWERK Quick-change holder (for Steel Holder Head B) is a precision clamping component designed to receive large boring bars and Morse taper sleeves directly for turning and boring operations 40 mm cylindrical bore for large shanks Direct mounting for big boring bars and MT sleeves 120 mm overall length for stable engagement Faster changeovers with proven repeatability The quick-change concept reduces machine downtime by enabling fast, repeatable swaps between tools. With a 40 mm cylindrical bore and an overall 120 mm length, the unit provides a consistent seating surface that maintains concentricity and minimises run-out during operations. In practice, this translates into shorter setup times and fewer re-measurements after tool changes, supporting lean production goals and higher machine utilisation. Designed for heavy boring bars and Morse taper sleeves Engineered for the direct acceptance of large boring bars and Morse taper sleeves, the holder offers the rigidity required for medium- to heavy-duty turning tasks. The cylindrical reception ensures an even load distribution along the shank, which improves cutting stability and surface finish. For users with mixed tooling—solid bars and MT-mounted tools—this reduces the need for additional adapters and simplifies tooling logistics. Built compatibility with Steel Holder Head B for straightforward integration The interchangeable unit is specifically suitable for Steel holder head B, allowing seamless integration into existing quick-change systems that employ this head type. The design eliminates intermediate clamping elements where possible, promoting a compact tool stack and reliable axial positioning. Clear dimensional data—40 mm bore and 120 mm length—supports accurate planning when laying out tool assemblies or verifying spindle clearance. Supply assurance and quality filter from a trusted partner Availability is backed by a structured supply chain and a dedicated distribution partner that acts as a European quality filter. Sourcing through this channel provides access to a broad portfolio of precision components and the assurance of consistent product verification. Traceability of the unit and concise technical data help procurement and production planners to align requirements without compromising on operational reliability. Contact Metav Werkzeuge for a compatibility check or to arrange immediate supply from Emmerich: call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 2000832172NW Label: Wechselhalter f.Stahlhalterkopf B f.gr.Zylinderschäfte Spann-D.40mm TECWERK Product type: Quick-change holder Manufacturer: TECWERK UID: 2000832172NW Facts Bore diameter: 40 mm Overall length: 120 mm Packaging unit: 1 Special features with cylindrical bore for direct reception of large boring bars and Morse taper sleeves for quick-change steel holder head B suitable for large cylindrical shanks FAQ What is the clamping or bore diameter of the holder? The holder provides a 40 mm cylindrical bore as the clamping interface for large shanks. Is the unit compatible with Morse taper sleeves? Yes, the design allows direct mounting of Morse taper sleeves for quick tool swaps. Which holder head does this unit fit? This quick-change component is intended for use with Steel holder head B and integrates into compatible quick-change systems. What is the overall length of the holder? The total length is 120 mm, providing stable engagement and axial support. Can large boring bars be mounted directly? Yes, the holder is specified for direct acceptance of large boring bars, reducing the need for additional adapters. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
120mm Toolholder For Steel Tool Holder Head B With 32mm Clamping Height - TECWERK
Benefit from the precise 32 mm clamping height and a 120 mm overall length, which together deliver dependable positioning and improved reach for turning operations; order this holder directly via Metav Werkzeuge or consult the technical team for configuration advice. Interchangeable holder for Steel Holder Head B — 32 mm clamping height (TECWERK) The Interchangeable holder for Steel Holder Head B is a compact toolholder designed for turning tools, offering a 32 mm clamping height for consistent tool geometry and reliable workshop use. 32 mm clamping height for consistent positioning 120 mm overall length for stable reach Compatible with Steel Holder Head B Designed for turning tool applications Precision and stability for turning operations The combination of a defined clamping height A: 32 mm and a 120 mm overall length ensures consistent tool geometry and reduces the need for repeated readjustment. A fixed clamping height directly influences tool centreline alignment and cutting performance; this holder keeps the tool axis predictable, which improves repeatability across serial operations and helps maintain surface quality. For shops focused on throughput, the measurable consistency of the mounting interface reduces scrap and machine downtime by simplifying set-up procedures and preserving cutting parameters between jobs. Seamless compatibility to reduce setup time Designed specifically for use with Steel Holder Head B, this interchangeable toolholder simplifies tooling logistics in mixed-machine environments. The straightforward compatibility reduces the variety of holders required on the shop floor and shortens changeover times during tool replacement or regrinding cycles. As a standardised accessory for turning applications, the component supports streamlined inventory management and faster tooling swaps, thereby increasing productive hours on the lathe and lowering indirect labour spent on set-up. Workflow advantages and practical handling in the workshop Supplied in a single unit, the holder suits repair, replacement and small-batch production contexts where predictable handling matters. The compact design supports secure clamping and contributes to vibration damping when mounted at the correct clamping height, which helps preserve insert life and improve surface finish. For technical clarification or to verify fit with a specific machine tool, Metav Werkzeuge provides product coordination and specification guidance so the correct configuration is selected for each application. Contact Metav Werkzeuge for expert advice on TECWERK interchangeable holders and to confirm the optimal 32 mm clamping-height configuration for workshop needs Technical data Article number: 2000832158NW Product name: Wechselhalter f.Stahlhalterkopf B f.Drehstähle Spann-H.32mm TECWERK Product type: Wechselhalter Manufacturer: TECWERK Packaging unit: 1 Facts Overall length: 120 mm Clamping height A: 32 mm SKU / UID: 2000832158NW Special features For turning tools Compatible with Steel Holder Head B Interchangeable holder design FAQ What applications is this holder intended for? This Interchangeable holder for Steel Holder Head B (TECWERK Wechselhalter, SKU 2000832158NW) is intended for turning tool applications and workshop lathe use. What is the clamping height of the holder and why does it matter? The holder specifies a clamping height A of 32 mm; the 32 mm clamping height in the TECWERK Wechselhalter 2000832158NW ensures consistent tool centreline alignment for repeatable cutting conditions. Which head is this holder compatible with? Compatibility is specified for Steel Holder Head B; the TECWERK interchangeable holder is designed to mount directly to a Steel Holder Head B interface. What is the overall length and how does that affect performance? The overall length is 120 mm; a 120 mm reach balances accessibility and rigidity for turning tasks with the TECWERK holder 2000832158NW. How is the product supplied? The product is supplied as a single unit (packaging unit 1) for the TECWERK Wechselhalter 2000832158NW. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
120mm Toolholder For Steel Toolholder Head B 25mm Mounting Height - TECWERK
Take advantage of the interchangeable design, precise clamping height (25 mm) and a compact overall length of 120 mm to secure consistent tool set-up and short changeover times on turning centres; order via Metav Werkzeuge or consult our specialists for application advice. TECWERK interchangeable holder for steel holder head B — clamping height 25 mm The TECWERK interchangeable holder for steel holder head B is designed for secure mounting of turning bars and fast changeovers in workshop and production environments. Interchangeable holder design Clamping height 25 mm Overall length 120 mm Compatible with steel head B Precision fit that stabilises turning performance A purpose-built interchangeable holder delivers repeatable seating and consistent tool geometry, which reduces rework and setup time. The defined clamping height ensures the cutting edge sits at the expected centreline; a stable centreline improves finish quality and tool life. This precision seating is particularly valuable where tolerances are tight and batch-to-batch uniformity is required. Faster changeovers for improved throughput The compact overall length 120 mm combines rigidity with space efficiency on the turret, supporting quicker tool indexing and less interference in multi-tool stations. The modular design enables swift replacement of worn holders without requalifying the entire tool assembly, helping to keep machine uptime high and production flow steady. Simple concept, clear technical benefits The solution mates with a steel holder head B, providing a standardised interface for many turning bar families. The declared 25 mm clamping height refers to the tool seating plane relative to the holder datum; keeping this datum consistent avoids repetitive height adjustments and streamlines tool presetting. The result is improved repeatability and fewer stoppages for manual corrections. Application and handling made straightforward Intended for use with turning bars, the holder is supplied as a single unit and is ready for installation in standard tool heads where the B-type steel head is fitted. The straightforward geometry facilitates cleaning and inspection during routine maintenance. For any queries about fitment or compatibility, Metav Werkzeuge offers technical information and assistance by email or phone. For personalised application advice or to secure a supply of the TECWERK interchangeable holder with 25 mm clamping height, contact Metav Werkzeuge for a reliable recommendation and seamless delivery from Emmerich. Technical data SKU: 2000832157NW Product type: Interchangeable holder Manufacturer: TECWERK Overall length: 120 mm Clamping height: 25 mm Core dimensions Overall length: 120 mm Clamping height (A): 25 mm Packaging unit: 1 Special features For turning bars Compatible with steel holder head B Interchangeable holder design Suitable for standard turret mounting FAQ Is this holder compatible with a steel holder head B? Yes. The TECWERK interchangeable holder is designed specifically for use with a steel holder head B and offers the matching interface for secure mounting. What does the clamping height of 25 mm mean in practice? The 25 mm value denotes the seating height (datum A) that determines the tool centreline; consistent clamping height simplifies presetting and maintains cutting geometry. How long is the holder and how does that affect stability? The holder has an overall length of 120 mm, which balances rigidity and reach to support stable turning operations while minimising interference in multi-tool setups. How is the product supplied and what is the packaging unit? The item is supplied as a single unit; packaging unit: 1, ready for immediate installation. What is the product SKU for ordering or enquiry? The SKU for ordering and reference is 2000832157NW and the product is listed under the TECWERK interchangeable holder category. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
1250mm Independent Four-Jaw Chuck, 150 rpm, 8-M20 T-Slots - Vertex
High-capacity clamping, precise independent jaw control and rugged construction combine for consistent heavy-duty turning of large components; benefit from the Ø 1250 mm capacity, the rated 150 rpm operating speed and the substantial 905 kg mass for stable machining. Order the VKC-50 independent four-jaw chuck directly via Metav Werkzeuge or ask our consultants if needed VKC-50 Independent four-jaw chuck – Ø 1250 mm, 150 rpm – Vertex The VKC-50 independent four-jaw chuck is a heavy-duty workholding solution designed for large-diameter turning on industrial lathes Independent four-jaw design for exact centring Large Ø 1250 mm gripping capacity Rated speed 150 rpm for heavy work Robust build, approx 905 kg mass High-capacity workholding for large components The VKC-50 delivers a Ø 1250 mm clamping range that enables secure handling of substantial parts. Its mass of 905 kg contributes to inherent stability during turning, reducing vibration and improving surface finish; this stability is particularly important when machining large diameters where rigidity determines process reliability. The result is a workholding device that supports continuous production runs in heavy industries by providing the structural basis for repeatable machining operations. Accurate, independent clamping for irregular and complex parts Thanks to its independent four-jaw concept, each jaw can be set separately, which enables precise centring of asymmetrical or irregular workpieces. This flexibility reduces the need for special fixtures and simplifies the setup of one-off or batch runs requiring individual jaw adjustment. The independent jaw control supports high precision clamping, making the chuck suitable for tasks where concentricity and part geometry demand careful alignment rather than relying on a single fixed centre point. Engineered for reliable operation on industrial lathes Operational parameters such as the rated 150 rpm indicate suitability for heavy turning rather than high-speed applications, aligning the chuck with slow, high-torque machining operations. The T-nut 8-M20 mounting arrangement offers a standardised interface for secure attachment to a variety of spindle faces or adaptors, ensuring compatibility within robust turning setups. The combination of deliberate speed rating and substantial mass optimises torque transfer and reduces centrifugal effects, supporting safe, stable use in demanding environments. Workshop integration and productivity benefits In a production context, the chuck’s capacity and independent jaw control help to cut setup time for non-standard parts and to reduce reliance on specialised clamping fixtures, contributing to improved workflow efficiency. Specifying this workholding element supports a pragmatic approach to heavy machining: the robust construction minimises unplanned downtime and the standardised mounting eases integration into existing machine fleets. For buyers seeking a dependable partner in precision, Metav’s supply chain and quality filter for the European market ensure consistent delivery and technical guidance. Contact Metav Werkzeuge for tailored configuration advice on the Vertex VKC-50 independent four-jaw chuck and to request detailed technical documentation; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VKC-50 GTIN: 4061905094903 Manufacturer: Vertex ECLASS: 21020490 Facts Diameter: 1250 mm Speed: 150 rpm Weight: 905 kg Special features Type: Independent four-jaw chuck Mounting: T-nut 8-M20 Designation: Vierbackenfutter (independent) FAQ What maximum workpiece diameter can be clamped with this chuck? The VKC-50 provides a clamping capacity of 1250 mm, suitable for large-diameter components used in heavy turning operations. Is the chuck suitable for irregular or non-cylindrical parts? Yes; the independent jaw arrangement of the Vertex VKC-50 allows each jaw to be adjusted separately, enabling precise centring of asymmetrical or irregular workpieces. What is the recommended operating speed for this workholding solution? The VKC-50 is rated for 150 rpm, which matches heavy-duty, high-torque turning processes rather than high-speed machining. How is the chuck mounted to the machine spindle? Mounting is via a T-nut 8-M20 arrangement, providing a secure and standardised interface for attachment to compatible spindle faces or adaptors. For which workshop applications is this chuck intended? This Vertex independent four-jaw chuck is intended for industrial lathe applications where large diameters, rigid clamping and precise jaw adjustment are required, such as heavy fabrication, rotor turning and large-part servicing. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
125mm Independent Four-Jaw Lathe Chuck, 4×M8 T-Slots, 1900 RPM - Vertex
Take advantage of the independent jaw operation, 125 mm nominal diameter and a 1,900 r.p.m. rating for reliable machining of non-cylindrical and uneven parts; order the component directly via Metav Werkzeuge or consult our advisors for fitment and mounting details. Vertex VKC-5 Independent Four-Jaw Chuck — 125 mm, 1,900 r.p.m. A Vertex VKC-5 independent four-jaw chuck designed for secure, adjustable clamping of irregular, square or asymmetrical workpieces on lathes and turning centres Independent four-jaw operation 125 mm nominal diameter Rated speed 1,900 r.p.m. T-slots 4 × M8 Precise, adaptable clamping for diverse workpieces The independently adjustable jaws deliver flexibility when handling off-centre or non-circular stock. By setting each jaw separately, the clamping device allows controlled positioning of the workpiece for turning or profiling operations while maintaining stable contact under load. This approach reduces the need for custom fixtures and speeds up set-up for small series or maintenance tasks, improving throughput without sacrificing repeatability. Balanced design for safe, high-speed operation With a nominal diameter of 125 mm and a maximum permitted speed of 1,900 r.p.m., the VKC-5 is sized for a broad range of medium-duty turning applications. The unit's mass of 5.1 kg contributes to mechanical stability while the mounting interface features T-slots 4 × M8, enabling secure attachment to standard spindle faces or adapter plates. These characteristics combine to support reliable rotational balance and compatibility with many workshop machines. Practical benefits that reduce setup time The unit's configuration simplifies clamping of square, rectangular or odd-shaped blanks, cutting down on improvisation and secondary tooling. Fewer bespoke fixtures mean shorter lead times and a more consistent workflow on the shop floor. Paired with Metav's logistics and product range, the chuck fits into an efficient supply chain that emphasises accessibility of precision components and dependable stock levels for industry users. For secure, versatile clamping choose the Vertex VKC-5 — order or request mounting advice from Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: VKC-5 GTIN: 4061905086588 Brand: Vertex Facts Diameter: 125 mm Rated speed: 1,900 r.p.m. Weight: 5.1 kg T-slots: 4-M8 eClass: 21020490 Special features Independent four-jaw design Suitable for clamping irregular and square workpieces Category: Vertex FAQ How do independent jaws affect clamping precision? Independent jaws allow individual adjustment of each jaw, so the VKC-5 can centre and secure non-round or eccentric parts with controlled contact and reduced need for special fixtures. Which machines is this chuck compatible with? The VKC-5 is intended for lathes and turning centres that accept a 125 mm chuck and can operate within the stated maximum speed of 1,900 r.p.m. How is the chuck mounted to a spindle face? Mounting uses T-slots (4 × M8) as specified; ensure appropriate adapter plates and correct torque on fastenings for safe operation. Can the chuck hold square or rectangular stock reliably? Yes — the independent jaw arrangement is particularly suited to square and rectangular workpieces, enabling stable contact points without special jaws. What basic maintenance does the chuck require? Regular cleaning of the jaw slides, light lubrication of moving parts and inspection of mounting fastenings prolong service life and preserve performance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
130mm Insert Prism Gr. B Clamping Ø 20mm For Quick-Change Holder - TECWERK
Take advantage of precise radial clamping and straightforward compatibility in one compact component; the prism insert delivers steady engagement for round shank bars and integrates easily with interchangeable holders — order the part directly via Metav Werkzeuge or consult the team for application advice. TECWERK Prism Insert Size B — 20 mm clamping Ø, 130 mm length The Prism Insert Size B secures round shank bars in interchangeable holders, providing repeatable radial positioning for machining and assembly tasks. Prism insert Size B compact design Clamping Ø 20 mm for round shanks Length 130 mm for stable engagement For interchangeable holders with prism Secure, repeatable clamping for round shank bars A prism insert is designed to transform a conventional holder into a reliable radial clamping system. This insert uses a V-shaped contact geometry to centre and stabilise cylindrical shanks, producing consistent axial alignment and reduced runout. With a clamping diameter of 20 mm and a length of 130 mm, the component offers a balance of engagement depth and compact form, helping to maintain machining accuracy without excessive overhang. The design reduces setup variability and supports efficient changeovers in production environments where consistent part positioning is critical. Compatibility with interchangeable holders and easy integration Engineered for use with interchangeable holders, the insert fits into standard prism-equipped change holders and adapts those assemblies for round shank components. The item is sized as Size B, which indicates the dimensional family and ensures predictable fitment in matching holder systems. Installation requires straightforward insertion into the prism pocket of the holder; once located, the insert provides an immediate clamping interface for cylindrical tooling or workpieces. This approach minimises the need for bespoke fixtures and simplifies inventory of clamping elements across different machines. Practical benefits for workshop and production use Adopting a prism insert for routine clamping tasks delivers operational advantages: improved repeatability, reduced rework and less time spent on manual alignment. The moderate length confers stability under light to medium loads while keeping the overall assembly compact for confined setups. For operations handling multiple identical shafts or bars, the insert supports rapid, consistent seating that preserves tool life and contributes to predictable cycle times. The component is particularly suited to setups where radial precision matters more than heavy axial loading. What to consider during selection and use When selecting a prism insert, confirm the holder compatibility and verify the effective clamping range after installation — here the system provides a maximum clamping Ø of 20 mm for round shank bars once the insert is in place. Size family (B) should match the holder specification to avoid play. Although this insert delivers precise radial support, its suitability for a specific machining task depends on load direction and cutting forces; match the component to the intended application to ensure optimal performance. For tailored advice on integrating TECWERK prism inserts into existing toolholding systems, contact Metav Werkzeuge in Emmerich for application guidance and parts availability — info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000832142NW Manufacturer: TECWERK Product type: Prism insert (Einlegeprisma) Size designation: B Data Clamping diameter: 20 mm Length: 130 mm Packaging unit: 1 Special features For interchangeable holders with prism For round shank bars Clamping Ø = max possible clamping Ø after prism insertion FAQ How does the prism insert improve concentricity compared with plain clamping? The prism insert centres round shank bars by V-shaped contact surfaces, so the TECWERK prism insert Size B reduces radial runout and provides more consistent concentricity than unsecured seating. Which holder types accept this prism insert? The component is intended for interchangeable change holders equipped with a prism pocket; compatibility requires a Size B receptive pocket in the holder for correct seating. What is the maximum shank diameter that can be clamped with this insert? After the prism insert is fitted in the holder, the effective maximum clamping diameter is 20 mm for round shank bars. Is the prism insert suitable for heavy axial loads? The insert provides stable radial support and moderate axial stability; for heavy axial forces, verification against holder and application constraints is recommended before use. Can the insert be used for repeatable production indexing? Yes — the repeatable seating and centring behaviour of the prism insert supports consistent positioning across multiple workpieces in serial production. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
132mm Universal Centre With Live Centre Mounting, 0.005mm Accuracy, Alloy Steel - Vertex
Take advantage of precision, robust alloy construction and high operational speed for dependable spindle support and consistent concentricity in turning operations. Benefit from a compact 132 mm length and a runout tolerance of 0.005 mm that together maintain machining quality and repeatability. Order directly via Metav Werkzeuge or consult the technical team for application-specific advice. Universal live centre VPC-MT2 — alloy steel, 132 mm by Vertex Universal live centre VPC-MT2 for lathe work, providing revolving tailstock support and stable axial alignment across general turning applications Universal revolving centre for lathes Accuracy within 0.005 mm Up to 2,800 rpm operational speed Alloy steel construction for long service life Precision where concentricity matters The revolving tailstock point delivers a defined support point that reduces axial runout and maintains workpiece concentricity throughout turning cycles. Built to an accuracy of 0.005 mm, the centre stabilises the cutting process, which translates into fewer rework cycles and improved first-pass yields. The close tolerance is particularly beneficial when producing tight-shaft diameters or precision components where concentricity is decisive for assembly or balancing. Stable performance at practical spindle speeds Rated for operation up to 2,800 rpm, the centre is suitable for a broad range of workshop turning speeds without compromising bearing life. Its rotating bearing assembly minimises friction and heat generation, supporting continuous operation during longer batch runs. The modest weight of 0.5 kg and compact profile help maintain lathe balance and reduce axial deflection, supporting reliable machining of medium-duty parts. Durable construction for everyday workshop use Manufactured from alloy steel, the centre is engineered for wear resistance and dimensional stability under cyclic loading. The material choice safeguards the running surface against premature abrasion, extending service intervals and lowering lifetime costs. The robust construction makes the centre a sound component for mixed-material workflows where consistent support and repeatability are required. Practical dimensions and workshop integration With a length of 132 mm, the centre suits common tailstock configurations and leaves sufficient engagement for shorter and medium workpieces. The compact form factor eases storage and handling while the balanced design supports steady rotation under typical lathe forces. Where interchangeability and compatibility with existing setups are priorities, the compact profile and industry-standard format facilitate straightforward use in general workshop environments. Contact Metav Werkzeuge in Emmerich for tailored application advice and ordering details; the Metav team provides technical guidance and reliable European supply from stock Technical Data SKU: VPC-MT2 GTIN: 4061905085635 Manufacturer: Vertex Facts Length: 132 mm Weight: 0.5 kg Maximum speed: 2,800 rpm Accuracy (runout): 0.005 mm Special features Material: alloy steel Revolving/live centre design Compact form factor for standard tailstocks FAQ What turning applications suit this live centre? The VPC-MT2 universal live centre is designed for general lathe work where axial support and concentricity are required; it performs well on medium-duty turning tasks and routine batch production. How does the VPC-MT2’s accuracy affect finished parts? An accuracy of 0.005 mm reduces runout-related errors, improving surface finish and dimensional repeatability for turned components produced with the centre. Is the material suitable for heavy-duty machining environments? Constructed from alloy steel, the centre offers enhanced wear resistance for everyday workshop use; for extreme-duty or specialised alloys, application-specific assessment is recommended. Which lathe speeds are appropriate for this centre? The centre is rated up to 2,800 rpm, covering a wide range of common turning speeds without compromising bearing durability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
140mm Clamping Ring For Soft Jaw Inserts, 1 kg - Vertex
Secure, precise clamping for soft jaw setups with a 140 mm nominal diameter and lightweight handling for faster changeovers. Benefit from compatibility with 5" chuck jaws and dependable repeatability — request the ring directly via Metav Werkzeuge or consult our advisers for accessory matching. Clamping ring VFR-05 — for soft chuck jaws, 140 mm (Vertex) A robust Clamping ring VFR-05 engineered to secure soft jaw liners on 5-inch chucks, ideal for workshop turning and light industrial applications. 140 mm nominal diameter Compatible with 5" soft chuck jaws Robust design for repeatable clamping SKU VFR-05 by Vertex Faster setup through secure, repeatable clamping The clamping ring provides a stable interface between the chuck and soft jaw liners, delivering consistent contact pressure across the clamped component. With a 140 mm nominal diameter and compatibility with standard 5" chucks, the accessory reduces the need for frequent readjustment. This results in shorter setup times and fewer interruptions to production, supporting a measurable increase in operational efficiency while maintaining workpiece integrity. Protects delicate surfaces and reduces rework Using soft jaw liners together with the ring minimises surface damage on sensitive parts. The combination of the ring and liners offers repeatable clamping that keeps components aligned within close tolerances, lowering the risk of rejects and subsequent rework. For jobs where finish quality matters, this approach preserves machining tolerances and contributes to a more consistent end result. Designed for practical workshop handling Weighing approximately 1 kg, the clamping accessory is light enough for quick handling yet sturdy enough to hold workpieces securely during rotation. Its straightforward form factor simplifies installation and removal, supporting fast tool changes and reduced downtime. Combined with fast shipping from the Metav webshop, the component is suited to busy shops that value downtime reduction and predictable tooling supply. Clear compatibility checks and straightforward use Compatibility is indicated for 5" soft chuck jaws; fitment can be confirmed by measuring the jaw seating and nominal diameter. A precision caliper is useful to verify the 140 mm dimension and ensure the ring matches the backing geometry of the soft jaws. Where minor adjustments are needed, simple alignment checks are sufficient — the design keeps fitting and removal intuitive for shopfloor staff with basic tooling knowledge. Request the Vertex VFR-05 clamping ring via Metav Werkzeuge for reliable workshop clamping — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for precise compatibility advice Technical Data Article number: VFR-05 GTIN: 4061905084478 Manufacturer: Vertex Core data Diameter: 140 mm Weight: 1 kg Special features Suitable for 5" soft chuck jaws For soft jaw liners / soft jaw faces Fast shipping from Metav webshop FAQ Is this ring compatible with my 5" chuck? The VFR-05 clamping ring is designed specifically for use with 5" soft chuck jaws and a nominal diameter of 140 mm, ensuring correct fit where those dimensions match. Can the ring be used to protect delicate components? Yes, paired with soft jaw liners the clamping ring minimises surface damage and supports secure, gentle holding of delicate parts during machining. How heavy is the accessory and is it easy to handle? The clamping ring weighs about 1 kg, offering lightweight handling for quick installation while maintaining sufficient mass for stable clamping. What tool is recommended to check fitment? A precision caliper is recommended to measure the jaw seating and confirm the 140 mm diameter for a reliable fit. How quickly is delivery arranged? Fast shipping is available through the Metav webshop, facilitating prompt replenishment of workshop supplies. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
143,5mm Zentrierspitze Pro Genauigkeitsausführung Verlängerte Laufspitze 60° Spitzenwinkel MK5 Rundlauf 0,005 mm Drehzahl 3000 min⁻¹ - RÖHM
Zentrierspitze HVL Pro MK5 mit verlängerter Laufspitze RÖHM – Zentrierspitze Die Zentrierspitze HVL Pro MK5 mit verlängerter Laufspitze RÖHM ist eine Pro‑Genauigkeitsausführung zur präzisen Werkstückzentrierung bei hochbelasteten Drehprozessen. Pro‑Genauigkeit mit Rundlauf ≤ 0,005 mm Für Werkstücke bis 1200 kg Belastbarkeit MK5 Schaft für standardisierte Spannfutteraufnahme Verlängerte Laufspitze für tiefere Zentrierung Geeignet bis 3000 min⁻¹ Drehzahl Präzision, die Produktionsprozesse reduziert Die Zentrierspitze bietet eine Rundlaufabweichung von maximal 0,005 mm, was die Rüstzeiten und Nacharbeit spürbar reduziert. Durch die Kombination aus geringer Toleranz und stabiler Bauform lässt sich die Wiederholgenauigkeit beim Drehen verbessern, wodurch Ausschussquoten sinken und die Ausbringung steigt. Die Möglichkeit, Werkstücke bis zu 1200 kg aufzunehmen, macht die Ausführung ideal für Serienfertigung und Einzelteile mit hohem Gewicht. Robuste Anschlusslösung und einfache Integration Mit der Schaftausführung MK5 ist die Aufnahme kompatibel zu gängigen Drehmaschinen und Spannfuttern, was die Integration in vorhandene Produktionslinien vereinfacht. Der Schaftdurchmesser 44,399 mm und der Gehäusedurchmesser 88,5 mm sorgen für sichere Sitzfestigkeit und eine ausgewogene Masseverteilung. Der Spitzenwinkel 60° unterstützt standardisierte Zentrieraufgaben; die Spitzenlänge 65 mm ermöglicht tiefere Zentrierpositionen ohne Modifikation der Maschine. Einsatzbereiche und Maschinenvorteile Für Anwender in Werkzeugbau, Lohnfertigung und Maschinenbau bietet die HVL Pro gezielte Vorteile: hohe Belastbarkeit, stabile Zentrierung und reduzierte Vibrationsanfälligkeit bei Schnittkräften. Die zulässige Drehzahl bis 3000 min⁻¹ gewährleistet sicheren Betrieb bei typischen Zerspanparametern. Durch die verlängerte Laufspitze eignet sich das Produkt besonders für tiefgezogene oder langgestreckte Werkstücke, bei denen konventionelle Spitzen an ihre Grenzen stoßen. Wir empfehlen den Kauf der Zentrierspitze HVL Pro MK5 über Metav Werkzeuge; bei technischen Fragen steht das Team per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 zur Verfügung Leistungsmerkmale Artikelnummer: 4000832084NW Marke: RÖHM Typ: Pro - Genauigkeitsausführung, verlängerte Laufspitze Produktart: Zentrierspitze Verpackungseinheit: 1 Daten Durchmesser: 40 mm Ausladung: 143,5 mm Gewicht: 4,8 kg Schaftdurchmesser: 44,399 mm Spitzenlänge: 65 mm Spitzenwinkel: 60° Drehzahl max.: 3000 min⁻¹ Werkstückgewicht max.: 1200 kg Rundlaufabweichung max.: 0,005 mm Gehäusedurchmesser: 88,5 mm Besonderheiten Schaftausführung: MK5 Ausführung: Pro - Genauigkeitsausführung Verlängerte Laufspitze UID: 4000832084NW FAQ Wie präzise ist die Zentrierspitze in der Praxis? Die Zentrierspitze HVL Pro MK5 von RÖHM erreicht eine Rundlaufabweichung von maximal 0,005 mm, was für hohe Wiederholgenauigkeit bei Serien und Einzelteilen sorgt und Nacharbeit reduziert. Für welche Maschinen ist die HVL Pro MK5 geeignet? Die HVL Pro MK5 ist für Drehmaschinen und Spannfutter mit MK5‑Aufnahme ausgelegt und lässt sich unkompliziert in bestehende Produktionslinien integrieren. Welche maximale Drehzahl darf verwendet werden? Die zulässige maximale Drehzahl beträgt 3000 min⁻¹; innerhalb dieses Bereichs bleibt die Zentrierspitze formstabil und sicher im Betrieb. Kann die Spitze schwere Werkstücke tragen? Ja, die Konstruktion erlaubt Werkstückgewichte bis zu 1200 kg, wodurch die HVL Pro MK5 auch für schwerere Bauteile in der Serienfertigung geeignet ist. Welcher Spitzenwinkel wird verwendet und was bedeutet das für die Praxis? Der Spitzenwinkel beträgt 60°, ein Industriestandard, der zuverlässige Zentrierung bei typischen Drehprozessen gewährleistet. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Hollow Spindle Arbor Stop With Internal Jaw Expansion, Adjustable Clamp - TECWERK
Take advantage of a secure internal clamping mechanism and wide adjustability for concise spindle set-up and reduced adjustment time; the rear-insertion design and special tightening key ensure a positive hold and easy repositioning. Order the hollow spindle stop directly via Metav Werkzeuge or consult the specialists for application advice. TECWERK Hollow spindle stop – rear insertion, clamping range 4–110 mm A TECWERK hollow spindle stop for rear insertion, designed to secure tools inside hollow spindles with an adjustable internal gripping range Rear insertion for compact spindle installation Adjustable clamping 4–110 mm Special key for secure tightening Push-fit jaws for reliable internal grip Secure internal clamping for stable spindle operation The hollow spindle stop provides a mechanically positive internal grip by expanding its jaws against the spindle bore when the tightening screw is actuated. Inserted from the back of the hollow spindle, the device converts axial screw movement into radial bite, producing a secure seating that reduces the risk of slippage during rotation. The specified clamping range 4–110 mm covers many common hollow spindle diameters, enabling a single device to serve multiple set-ups and supporting consistent machining results through improved tool retention. Fast insertion and tool-free length adjustment Assembly and position changes are executed from the spindle rear with a special key that both locks and releases the mandrel. Tightening forces the gripping segments outward against the inner wall, while releasing the key permits linear repositioning along the spindle axis. This mechanism allows quick repositioning without full disassembly of the drive train, which translates into reduced downtime and faster changeovers for production or maintenance cycles. The straightforward operation is especially beneficial in high-throughput workshop environments. Reliable performance under repetitive use The mechanical principle—radial expansion by a central tightening screw—offers durable and repeatable clamping behaviour over many cycles. The design focuses on a positive internal hold rather than frictional surface contact alone, which tends to deliver a more dependable seat in service. For operations requiring repeatable axial positioning and a trusted internal grip, the unit is engineered to maintain a consistent reliable hold, supporting process stability and part quality. Simple integration and practical handling The rear-insertion concept keeps the external spindle envelope uncluttered and facilitates integration into existing spindle housings. Adjustment is carried out using the supplied special key, enabling precise repositioning in length without ancillary fixtures. The unit is supplied as a single packaged item, ready for installation into compatible hollow spindles and intended to streamline set-up operations while maintaining a compact footprint on the machine. For dependable internal clamping select the TECWERK hollow spindle stop and contact Metav Werkzeuge in Emmerich for specialist advice and order handling at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000832499NW Item: Hohlspindelanschlag f.Spindel-D.94-110mm Product type: Hohlspindelanschlag Manufacturer: TECWERK Packaging unit: 1 Core specifications Clamping range: 4–110 mm Spindle diameter reference: 94–110 mm Packaging unit: 1 Features Rear insertion into hollow spindle Tightened and released with a special key Tightening screw expands jaws to inner wall Adjustable axial position after release Secure internal seating for reliable hold FAQ What clamping range does the device cover? The device provides a clamping range of 4–110 mm, suitable for many hollow spindle bores and flexible set-ups. How is the stop installed and secured inside the spindle? The stop is inserted from the rear of the hollow spindle and secured by a tightening screw; turning the supplied special key forces the jaws outward to press against the inner wall, creating a secure seat. Can the axial position be adjusted without full removal? Yes. When the special key is used to release the tightening screw, the stop can be moved axially and then retightened to the required position. Is this product suitable for high-cycle shop use? The mechanical expansion principle of the stop is designed for repeatable operation and offers consistent seating over multiple cycles, making it suitable for demanding workshop environments. Which brand and SKU identify this item? This hollow spindle stop is supplied by TECWERK and is listed under SKU 4000832499NW. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
150mm Toolholder Adapter For C Steel Toolholder Head, 32mm Shank Height - TECWERK
Benefit from robust compatibility with C-type steel holder heads and a precise 32 mm clamping height for dependable turning setups; order the quick-change holder directly via Metav Werkzeuge or consult the specialists if technical clarification is required. TECWERK quick-change toolholder for steel holder head C — 32 mm clamping height The TECWERK quick-change toolholder is a compact solution for workshop turning applications, designed to accept C-type steel holder heads and to support turning bars with a reliable clamping height of 32 mm. Quick-change toolholder for steel head C Clamping height 32 mm for standard set-up Overall length 150 mm for stable reach Robust construction for workshop turning Consistent set-ups that reduce machine downtime The quick-change design combines straightforward handling with repeatable positioning, enabling faster tool swaps and fewer re-alignments. Compatibility with the steel holder head C and a defined 32 mm clamping height simplifies fixture planning and minimises setup variation between operations. For production environments where cycle time and reproducibility matter, this holder supports a smoother workflow and fewer interruptions. Stability and reach for reliable turning performance With an overall length of 150 mm, the holder offers sufficient reach for common lathe configurations while maintaining rigidity at the cutting point. The elongated construction balances accessibility and stiffness, which helps to reduce chatter and improve surface finish in turning tasks. The combination of reach and stable clamping contributes directly to process reliability and consistent part quality. Designed for turning bars with clear mounting parameters Intended specifically for use with turning bars, the toolholder accepts the established C-type steel head interface and provides a known clamping datum at 32 mm. Explaining the clamping height: it denotes the vertical distance from the mounting datum to the cutting edge plane, a decisive dimension for turret and toolpost alignment. Specifying this parameter up front simplifies machine setup and avoids trial-and-error adjustments during production changeovers. Practical considerations and workshop integration The unit arrives as a single packing item and integrates into standard turning setups that use steel holder head C connections. Given the defined interface and measured dimensions, the holder is suited to systematic tool management and can be incorporated into visual tool lists or machine set-up sheets. For specialised applications or unusual tool geometries, technical clarification can be obtained to ensure correct fitment and optimal performance. Contact Metav Werkzeuge for tailored technical advice or to order the TECWERK quick-change toolholder with 32 mm clamping height — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance Technical Data Article number: 2000832159NW Manufacturer: TECWERK Product type: Quick-change holder Facts Overall length: 150 mm Clamping height: 32 mm Packing unit: 1 Applications / Features For turning tools Compatible with steel holder head C Suitable for workshop turning operations FAQ Is this holder compatible with a C-type steel holder head? Yes. The quick-change toolholder is designed to accept a steel holder head C, providing a defined interface for straightforward mounting. What is the clamping height and why does it matter? The clamping height is 32 mm, indicating the vertical datum to the cutting edge plane; this dimension ensures correct tool alignment in the turret or toolpost. What is the overall length and how does that affect operation? The overall length is 150 mm, which gives adequate reach while maintaining rigidity to support stable turning and improved surface finish. Is the holder suitable for turning bars or indexable insert systems? The holder is intended for use with turning bars and the C-type steel head interface; specific indexable systems should be checked for compatibility against these mounting parameters. Which SKU identifies this product for ordering? This component is listed under SKU 2000832159NW and is supplied as a single packing unit for workshop use. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm Toolholder For Steel Holder Head C With 40mm Clamping Height - TECWERK
Take advantage of the holder’s quick-change interface, precise 40 mm clamping height and 150 mm overall length for stable, repeatable turning operations; order the part directly via Metav Werkzeuge or request advice from our consultants. Interchangeable holder for steel holder head C — clamping height 40 mm (TECWERK) The Interchangeable holder for steel holder head C (clamping height 40 mm) is a quick-change tool holder designed for use with turning tool bits in precision turning applications, offering consistent seating and reliable alignment for production and workshop environments. Quick-change interface for tool posts Compatible with steel holder head C Clamping height 40 mm Overall length 150 mm Faster changeovers for uninterrupted production The quick-change design reduces non-productive time by enabling rapid replacement of tool carriers while maintaining positional accuracy. By combining a quick-change interface with a defined clamping height 40 mm, the holder supports predictable set-up routines and shorter cycle interruptions, which contributes directly to higher throughput and leaner workflows in jobbing and serial turning. Stable clamping for consistent surface finishes Engineered for use with turning tool bits, the holder gives a defined contact plane to the steel holder head C, improving repeatability and limiting micro-movement under load. This results in more consistent surface quality and reduced rework. The combination of precise seating and a measured 150 mm overall length helps preserve cutting geometry, so finishing passes remain uniform across batches. Seamless integration with existing posts and tool systems Compatibility with the steel holder head C minimises spare-part variety and eases integration into established quick-change tool posts. The standardised clamping height simplifies tool-setting procedures on lathes and reduces the need for individual shimming. Workshops benefit from reduced stocking complexity and quicker exchange routines, which in turn supports shorter lead times and predictable delivery performance. Built for workshop resilience and dependable results The holder is intended for everyday use in trade and industrial workshops, where robustness and reliable seating matter more than unnecessary complexity. Its straightforward function for turning tool bits focuses on delivering stable cutting conditions and reliable alignment, supporting both single-item precision work and repetitive production runs without elaborate maintenance procedures. For dependable quick-change performance from TECWERK, request this interchangeable holder via Metav Werkzeuge for tailored advice and fast supply; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000832160NW Product type: Interchangeable holder Manufacturer: TECWERK Dimensions / Core data Overall length: 150 mm Clamping height: 40 mm Packaging unit: 1 Compatibility / Special features Execution: for turning tool bits Suitable for: steel holder head C SKU: 2000832160NW FAQ What does the clamping height indicate for this holder? The clamping height of 40 mm indicates the defined seating level for the tool carrier and is essential for consistent tool geometry and repeatable set-up when using the interchangeable holder. Is the holder compatible with existing quick-change systems? Yes, the holder is designed for integration with the steel holder head C and standard quick-change tool posts to reduce set-up time and simplify spare-part management. Which applications is this holder intended for? This holder is intended for turning operations with turning tool bits, suitable for both workshop and small-series industrial turning tasks where rapid changeovers and repeatability are required. How does the overall length affect tool setup? The 150 mm overall length helps determine tool overhang and rigidity; it supports stable cutting conditions and predictable tool projection for consistent turning results. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
153mm Centre Punch With Interchangeable Tips 60° MT3 Stainless Steel - Vertex
Benefit from a combination of precise runout control, durable stainless‑steel construction and MT3 taper compatibility to maintain reliable turning operations and reduce rework. Order the centre via Metav Werkzeuge or consult the Metav team for application-specific advice. VLC-313 Interchangeable‑Tip Lathe Centre — Stainless Steel, MT3 Taper (Vertex) The VLC-313 is a robust lathe centre with replaceable 60° tips for accurate turning and marking in workshop environments. Stainless steel body for long service life MT3 taper for standard lathe mounting Interchangeable 60° tips for versatile use Balanced for operation up to 3,000 r.p.m. Precision where concentricity matters The VLC-313 delivers consistent axial accuracy with a runout tolerance of 0.008 mm, reducing the need for repeated setup checks and limiting scrap. Built from stainless steel, the centre resists corrosion and wear in daily shop use, which helps to preserve alignment and cutting results. This combination of precision and durable materials leads to fewer stoppages and a smoother production flow for small‑batch turning and inspection tasks. Quick tip changes and proven machine fit Interchangeable tips with a 60° angle allow rapid adaptation for different workpiece geometries, while the MT3 taper ensures firm seating in standard lathe tailstocks or live‑centre housings. For those less familiar with taper designations: MT3 denotes a Morse taper size 3, a common interface that simplifies tool selection and integration. The replaceable tip system reduces maintenance time and inventory complexity, supporting efficient changeovers and predictable tool life. Stable performance at workshop speeds Designed and balanced for operations up to 3,000 r.p.m., this centre combines a compact profile (length 153 mm) with a serviceable mass (approx. 1.4 kg) to provide rotational stability without excessive inertia. The result is reliable centre support during turning, facing and marking operations, with less vibration and improved surface finish. The Vertex design philosophy behind this accessory emphasises repeatable results and straightforward upkeep, making it suitable for production benches and maintenance shops alike. Contact Metav Werkzeuge in Emmerich for tailored advice on Vertex lathe accessories — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical guidance and ordering information Technical data Article number: VLC-313 GTIN: 4061905087004 Manufacturer: Vertex Facts Length: 153 mm Weight: 1.4 kg Speed rating: 3,000 r.p.m. Runout accuracy: 0.008 mm Tip angle: 60° Special features Material: stainless steel Taper interface: MT3 (Morse taper 3) Interchangeable tips included Brand: Vertex FAQ What is the recommended mounting for this lathe centre? The VLC-313 is supplied with an MT3 taper, making it compatible with tailstocks and live‑centre housings fitted for Morse taper size 3. Can the tips be replaced on the VLC-313 and where does it suit best? Yes — the model features interchangeable 60° tips, which makes the centre suitable for general turning, marking and centre‑support applications in workshop and light production environments. What speed can be used safely with this centre? The centre is balanced for operation up to 3,000 r.p.m., which covers typical lathe turning speeds for small to medium diameter workpieces. How does the stated accuracy benefit everyday machining? A runout tolerance of 0.008 mm improves concentricity during turning, reducing rework and ensuring more consistent finishes on machined parts. What material is the centre made from and how does that affect durability? Constructed from stainless steel, the centre offers elevated resistance to corrosion and wear, supporting long service life under normal workshop conditions. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com