40mm Centre Point MK5 With Live Centre Features: Max Workpiece 2000kg, Runout 0.005mm, Max Speed 2100 min⁻¹, 60° Tip Angle - TECWERK
Take advantage of the combination of high load capacity, tight runout tolerance, and robust MK5 mounting for reliable turning operations; order directly via Metav Werkzeuge or consult the team for application advice. Zentrierspitze MK5 mitlaufend · Live centre with 60° tip · TECWERK The Zentrierspitze MK5 mitlaufend is a rotating live centre designed for heavy-duty lathes and machining centres where secure support and consistent concentricity matter. MK5 Morse taper shank 60° precision tip Suitable for up to 2,000 kg workpieces Runout max 0.005 mm Max. speed 2,100 rpm Consistent concentricity for demanding turning tasks This rotating centre provides reliable support under significant loads, with a specified capacity for workpieces up to 2,000 kg and a runout max. 0.005 mm that helps maintain concentricity during turning. The tight runout value reduces rework and scrap by ensuring that cuts remain predictable and within tolerance; for shops producing components to strict dimensional standards, this translates into fewer rejects and shorter inspection cycles. The 60° tip angle gives a stable contact geometry that distributes clamping forces and reduces local deformation on softer workpiece materials. Quick fitting and secure taper connection Equipped with an MK5 Morse taper, the centre accepts standard MT5 sockets for straightforward fitting into tailstocks and machine spindles. The Morse taper system provides a self-locking, rigid connection that minimises axial play and eases repeatable mounting. For users unfamiliar with taper nomenclature: Morse taper (MT) indicates the tapered shank size and interface, ensuring compatibility with machines specified for MT5 tooling. This reduces setup time and simplifies tool inventory management in mixed-machine workshops. Designed for sustained rotation and operational stability The rotating assembly is specified for a max. speed of 2,100 rpm, balancing rotational performance with bearing longevity. A robust housing with a 90 mm diameter and a 50 mm tip length support the rotating element while dissipating forces generated during machining. At a mass of 4.7 kg, the unit is substantial enough to resist vibration yet compact for a wide range of lathes. These mechanical choices aim to deliver smooth rotation and reliable contact, which in turn reduces chatter and improves surface finish. Practical benefits for the production floor As a rotating centre, the device simplifies operations where the workpiece requires free rotation while being supported, for example during long turning cycles or when balancing is critical. The combination of a precise tip geometry, low runout and stable taper connection translates into shorter cycle times and more consistent parts per shift. For teams seeking predictable machine performance and lower downstream correction work, this live centre represents a pragmatic investment in process reliability. Technical questions regarding machine compatibility or specific applications can be clarified with Metav Werkzeuge's specialists. For tailored advice on integrating the TECWERK live centre into existing turning processes, contact Metav Werkzeuge – the specialists in supplying precision tooling and workshop solutions. Technical data Article number: 2000832043NW Manufacturer: TECWERK Product type: Live centre (rotating centre) Facts Weight: 4.7 kg Diameter (tip): 40 mm Projection (ausladung): 129 mm Tip length: 50 mm Housing diameter: 90 mm Shaft diameter: 44.399 mm Tip angle: 60° Max. workpiece weight: 2,000 kg Runout max.: 0.005 mm Max. speed: 2,100 rpm Taper: MK5 Package unit: 1 Special features MK5 Morse taper shank Rotating/live centre design Precision 60° contact geometry Robust housing for stable operation FAQ What maximum workpiece weight can this rotating centre support? The rotating centre is specified to support workpieces up to 2,000 kg, making it suitable for heavy turning operations where stable axial support is required. Which taper does the device use for mounting? The unit uses an MK5 (Morse taper 5) shank, ensuring secure, repeatable fitting in machines and tailstocks designed for MT5 tooling. How precise is the concentricity of the tip during rotation? The design specifies a runout max. 0.005 mm, which supports high-precision turning and reduces the need for secondary correction. Is the rotating centre suitable for high-speed turning? The component is rated to a maximum rotational speed of 2,100 rpm, balancing performance and bearing life for typical lathe applications. What does the 60° tip angle mean for machining results? A 60° tip angle provides a stable contact point that spreads clamping forces and helps maintain concentric support, which benefits surface finish and dimensional stability during turning. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm Live Centre MK5 60° Tip 50.5mm Length 88.5mm Housing, 0.005mm Runout 3000 min⁻¹ - RÖHM
Take advantage of precise runout control (≤ 0.005 mm) and a robust Morse taper MT5 mounting for reliable concentric support of heavy rotating workpieces; order directly via Metav Werkzeuge or consult the sales team for technical clarification. Centring centre Pro MK5 RÖHM — high-precision rotating support with 60° tip and MT5 shank A Pro centring centre MK5 designed for lathe applications, providing stable rotation and precise centring for heavy workpieces at workshop speeds High runout ≤ 0.005 mm Supports workpieces up to 2,000 kg Max speed 3,000 rpm Morse taper MT5 shank Consistent concentricity for heavy-duty turning The rotating centre delivers exceptional concentricity, with a specified runout deviation of max. 0.005 mm, which translates into reduced rework and finer surface finishes on turned components. Suitable for demanding production and maintenance tasks, this support is engineered to handle loads up to 2,000 kg, ensuring that large or asymmetrical parts remain stable throughout machining. The combination of low radial runout and sturdy construction minimises vibration and contributes to repeatable part quality. Stable rotation at practical workshop speeds Balanced for everyday shop use, the centre is rated to a maximum speed of 3,000 rpm, providing a compromise between high-speed performance and mechanical longevity. The 60° tip geometry and tip length of 50.5 mm are optimised to locate and support workpieces with minimal contact stress, while the housing diameter of 88.5 mm enhances rigidity. These features work together to reduce thermal and mechanical drift during longer cuts, improving dimensional stability and tool life. Straightforward fitment and reduced setup time Fitted with a precise Morse taper MT5 shank and a shank diameter of 44.399 mm, the centre integrates with standard MT5 spindles for quick installation and interchangeability. A projection of 129 mm gives a practical reach for a wide range of turning tasks without compromising stiffness, and the tip diameter of 40 mm provides a reliable contact area for locating. This compatibility streamlines machine setup and shortens downtime between jobs. Robust build for workshop environments Weighing 4.7 kg, the unit combines mass and balanced construction to dampen chatter and deliver steady performance under load. The Pro design prioritises longevity and ease of maintenance; regular inspection of the rotating elements and lubrication as per workshop practice will extend service intervals. For applications requiring consistent centring under repeated cycles, this rotating centre represents a durable choice that supports productivity and dependable results. For detailed application advice or to secure supply of the RÖHM Pro centring centre MK5, contact Metav Werkzeuge – assistance and ordering are available from the Emmerich location. Technical Data Article number: 4121011510NW Label: Zentrierspitze Pro MK5 mitlfd.RÖHM Type: Pro centring centre Packaging unit: 1 Measurements & Performance Projection: 129 mm Weight: 4.7 kg Tip diameter: 40 mm Shank diameter: 44.399 mm Housing diameter: 88.5 mm Tip length: 50.5 mm Tip angle: 60° Max workpiece weight: 2,000 kg Max speed: 3,000 min⁻¹ Runout deviation: max. 0.005 mm Design & Compatibility Shank: Morse taper MT5 Product name: Zentrierspitze Pro MK5 mitlfd.RÖHM SKU: 4121011510NW FAQ What maximum workpiece weight can the rotating centre support? The centring centre supports workpieces up to 2,000 kg, allowing secure locating of large components during turning operations. Is the shank compatible with standard MT5 spindles? Yes, the unit uses a Morse taper MT5 shank and the shank diameter is specified as 44.399 mm, making it compatible with standard MT5 fittings. What is the permissible runout for precise centring? The specified runout deviation is max. 0.005 mm, ensuring high concentric accuracy for precision turning tasks. At what speeds can the centre be operated safely? The centre is rated for a maximum speed of 3,000 rpm, suitable for many workshop turning applications while maintaining balance and service life. How does the 60° tip benefit machining results? The 60° tip provides a precise contact geometry that improves repeatable locating and reduces contact stress, supporting better surface finish and dimensional accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Morse Taper Sleeve For C Toolholder With Ejector Screw, MK4 - TECWERK
Take advantage of a precise, space-saving adapter that combines an MK4 shank and a secure 40 mm seating for quick-change tool holders; the integrated ejector screw speeds up tool swaps while maintaining repeatable concentricity. Order the adapter directly via Metav Werkzeuge or request tailored advice from our consultants. Morse taper sleeve MK4 · 40 mm – TECWERK tool adapter A Morse taper sleeve designed for the steel holder head C, enabling secure mounting of interchangeable tool holders with a 40 mm outer diameter for efficient workshop workflows MK4 shank for standard taper spindles Integrated ejector screw for fast tool release Compatible with interchangeable holders with cylindrical bore Fits steel holder head C Fast, reliable clamping with repeatable concentricity The adapter delivers a compact solution for converting an MK4 taper into a receptacle for quick-change tool holders. Thanks to the precise taper geometry and the MK4 configuration, the sleeve ensures secure clamping and a high degree of concentricity between spindle and tool. This reduces run-out and helps maintain cutting accuracy across repetitive cycles, making the component a practical choice where consistent machining quality is required. Reduced downtime through quick-change capability Fitted with an ejector screw, the sleeve allows rapid removal of the holder without the need for additional tools, shortening changeover times and improving productivity on the shop floor. The design supports holders with a cylindrical bore, so the adapter serves as a simple but effective interface that minimises handling and streamlines tool management during batch production or mixed-operation setups. Practical compatibility for common toolholder systems Engineered for use with the steel holder head C, the taper sleeve covers a typical application range in clamping technology and toolholding systems. Its 40 mm seating dimension provides a standard connection point for many quick-change holders, reducing the need for bespoke adapters and supporting a modular tooling strategy that keeps inventory lean and versatile. Installation guidance and suitability checks Although the sleeve is straightforward to fit, correct seating and alignment are essential for optimal performance. The component is intended for holders with a cylindrical bore and a matching 40 mm interface; the ejector screw must be tightened to the recommended torque and checked for free operation. For customers seeking confirmation of fit with specific holders or machines, technical guidance is available to verify compatibility and installation best practice. Contact Metav Werkzeuge for a compatibility check or a personalised recommendation — phone +49 2822 7131930 or email info@metav-werkzeuge.com — and benefit from Metav’s extensive range and workshop expertise Technical data SKU: 2000832180NW Product: Morse taper sleeve Brand: TECWERK Suitable for: Steel holder head C Shank design: MK4 Facts Diameter: 40 mm Packaging unit: 1 UID: 2000832180NW Special features For interchangeable holders with cylindrical bore With ejector screw Suitable for quick-change holders Fits steel holder head C FAQ What is the primary use of this taper sleeve? The taper sleeve is intended to adapt an MK4 taper to accept quick-change holders, providing a secure interface for machining operations with the TECWERK accessory (SKU 2000832180NW). Does the sleeve work with steel holder head C? Yes, the Morse taper sleeve is designed specifically to fit the steel holder head C and to accept interchangeable holders with a 40 mm cylindrical seating. How does the ejector screw improve usability? The integrated ejector screw permits fast release of the holder from the sleeve, reducing manual effort and decreasing changeover times during production runs. Is a compatibility check recommended before installation? A compatibility and fit check is advisable; Metav Werkzeuge can provide guidance to confirm that the sleeve and holder combination matches the intended application. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm Morse Taper Sleeve MK3 For Steel Toolholder B With Ejector Screw - TECWERK
Take advantage of a compact adapter that delivers reliable compatibility with MK3 tooling and a secure ejection mechanism for fast changeovers; order the component directly via Metav Werkzeuge or consult our specialists for matching holders and integration advice. Morse taper sleeve (MK3, 40 mm) by TECWERK A Morse taper sleeve (MK3, 40 mm) engineered to adapt interchangeable holders with a cylindrical bore for steel holder head B, featuring an integrated ejection screw for straightforward tool removal. Compatible with MK3 interchangeable holders 40 mm nominal diameter for stable fitting Integrated ejection screw for fast tool release Designed for steel holder head B compatibility Faster changeovers with modular tool systems The adapter provides a straightforward way to integrate existing modular tooling into a compact setup. By matching the MK3 shank form and the 40 mm seating, the sleeve reduces the need for multiple dedicated holders, which streamlines inventory and minimises machine downtime. The modular approach supports predictable setup times and improves throughput in mixed-production environments where flexibility is essential. Secure retention and simplified ejection for daily use Retention is ensured by the Morse taper principle, which creates a self-locking fit under load; the incorporated ejection screw enables safe and repeatable tool removal without hammering. This mechanical pairing reduces the risk of damage during changes and maintains concentricity between tool and spindle. For operations where frequent swaps are required, the combination of secure seating and controlled ejection translates into lower handling risk and better component life. Consistent machining quality through precise seating A correctly matched taper sleeve maintains concentricity and limits runout, which directly benefits surface finish and dimensional consistency when working on steel parts with a steel holder head. The adapter’s geometry supports stable clamping forces and reduces vibration, helping to protect cutting edges and achieve repeatable results. For less experienced operators, a reliable taper interface reduces variability in setup and supports predictable production outcomes. Practical workshop integration and parts management The adapter fits existing interchangeable holders with a cylindrical bore and is supplied as a single unit for straightforward stocking. The compact design simplifies storage and organisation in the toolroom. When specifying replacements or upgrades, the clear identification of shank type and nominal diameter makes procurement simpler and reduces the chance of ordering incompatible items, supporting a leaner supply chain. Contact Metav Werkzeuge for ordering advice and assistance matching the TECWERK Morse taper sleeve (MK3, 40 mm) to existing holders; Metav Werkzeuge can supply compatible components directly from their Emmerich warehouse and advise on workshop integration. Technical data Article number: 2000832177NW Type: Morse taper sleeve Brand: TECWERK Compatible with: Steel holder head B Packaging unit: 1 Facts Shank execution: MK3 Nominal diameter: 40 mm Bore diameter: 0 mm Special features For interchangeable holders with cylindrical bore With ejection screw Suitable for: interchangeable holder FAQ What holders is this taper sleeve compatible with? The sleeve is compatible with interchangeable holders that use a cylindrical bore and specifically fits steel holder head B; the MK3 shank form ensures correct seating. How does the ejection screw improve handling? The integrated ejection screw allows controlled separation of the sleeve from the holder, preventing impact damage and making tool changes quicker and safer when using the taper sleeve. Is this product suitable for high-precision tasks? Yes, the taper interface is designed to maintain concentricity and low runout, which supports consistent machining quality in precision work on steel using the MK3 adapter. Can the adapter be used with other shank standards? This sleeve is manufactured for the MK3 shank execution; different shank standards require corresponding adapters to guarantee correct fit and performance. What is the SKU for ordering or reference? Reference SKU 2000832177NW when enquiring about the TECWERK Morse taper sleeve to ensure correct identification of the MK3, 40 mm adapter. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm Quick-Change Holder for Round Drill Rods with Prism, 160mm Length - TECWERK
Benefit from precise clamping with an integral prism and a secure 40 mm clamping diameter for reliable repeatability; compatible with quick-change steel holder heads, this holder streamlines tool changes and keeps production moving. Order the interchangeable holder directly via Metav Werkzeuge or consult Metav’s specialists for system integration. Interchangeable holder for Steel holder head C — with prism, 40 mm clamping diameter (TECWERK) The Interchangeable holder for Steel holder head C is engineered to secure round drill rods in quick-change tool systems, providing stable seating and repeatable positioning for workshop and production environments. *Prism securing round drill rods *40 mm clamping diameter *Compatible with steel holder head C *Solid construction for workshop use Precise seating that reduces runout and rework The integrated prism locates round drill rods reliably, turning a cylindrical workpiece into a positively referenced element for machining. Combined with the 40 mm clamping diameter, the arrangement reduces lateral play and helps to maintain concentricity during turning or drilling operations. As a result, setup tolerances are tightened and the need for secondary alignment checks is lowered, which supports consistent part quality and fewer rejects. Designed for fast changeovers and consistent repeatability Compatibility with the quick-change steel holder head C means the mount is optimised for rapid insertion and removal in modular toolholding systems. The geometry of the interface is matched to maintain axial and radial position after each change, which leads to improved repeatability across tool swaps. Shorter changeover times translate into higher effective machine utilisation and more predictable cycle times on batch runs. Robust build for daily workshop demands Constructed for industrial use, the holder’s dimensions—including a height of 40 mm and a working length of 160 mm—provide a stable footprint in the tool chain. The component is intended to withstand the mechanical loads typical of metalcutting operations while keeping clamping forces steady. This robustness minimises vibration transmission to the tool and workpiece, supporting longer tool life and a superior surface finish. Transparent integration and measurable production benefits The device is supplied as a single unit and is suited for direct installation into compatible quick-change systems; this simplicity makes retrofitting straightforward where the interface standard matches. By reducing setup iterations and tool misalignment, the holder contributes to improved throughput and lower rework costs. For projects requiring batch standardisation, the component can be specified as part of a modular tooling concept to ensure uniform performance across multiple machines. Contact Metav Werkzeuge to discuss integration with existing quick-change systems and to arrange supply from our Emmerich warehouse Technical data Article number: 2000832167NW Label: Wechselhalter for Steel holder head C for round drill rods, clamping D.40mm TECWERK Manufacturer: TECWERK Facts Clamping diameter: 40 mm Height: 40 mm Length: 160 mm Packaging unit: 1 Special features With prism for round drill rods For quick-change steel holder head C Designed for round drill rod clamping Suitable for workshop and production toolholding FAQ What clamping diameter does the holder provide? The holder provides a 40 mm clamping diameter as specified for secure fixation of round drill rods. Is this holder compatible with quick-change steel holder heads? Yes, the interchangeable holder is designed for use with the quick-change steel holder head C, ensuring repeatable seating within such systems. What are the main dimensions of the holder? Key dimensions include a height of 40 mm and a working length of 160 mm as listed in the product details. Which types of drill rods does the mount accept? The mount is intended for round drill rods and uses an internal prism to locate and secure cylindrical shanks. Is the material of the holder specified? Material information is not provided in the available product data for SKU 2000832167NW; material details should be requested if required for specific applications. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm Taper Sleeve MK4 For Toolholder With Ejector Screw, Cylindrical Shank - TECWERK
Take advantage of a compact conversion sleeve that combines reliable MT4 clamping with a 40 mm cylindrical bore and an integrated ejection screw for efficient tool changes. Order the sleeve directly via Metav Werkzeuge or ask our consultants for application advice. Morse taper sleeve for steel holder head B — MT4, 40 mm, TECWERK Morse taper sleeve for steel holder head B designed as a conversion sleeve for interchangeable holders with a 40 mm cylindrical bore; ideal for secure clamping in lathe and turning tool setups. MT4 Morse taper for reliable clamping 40 mm cylindrical bore for interchangeable holders Integrated ejection screw for fast removal Compatible with steel holder head B Secure connection for consistent machining A robust Morse taper interface provides a vibration-resistant seating that maintains concentricity during cutting operations. The MT4 specification ensures compatibility with standard Morse taper spindles and toolholders, while the 40 mm cylindrical bore adapts the holder to a wide range of interchangeable systems. This combination reduces runout and helps to keep cutting forces stable, which in turn improves surface finish and tool life. The design is particularly suited to production-focused workshops that require repeatable results without lengthy setup times. Faster tool changes and straightforward maintenance The sleeve features an ejection screw, allowing quick and safe removal from the holder without hammering or improvised tools. The presence of the ejection mechanism shortens changeover times and simplifies maintenance routines, supporting higher machine uptime. The conversion sleeve’s straightforward geometry makes inspection and cleaning uncomplicated; any routine check can be carried out with standard measuring gauges to verify taper seating and bore condition. These practical advantages translate into measurable productivity gains on the shop floor. Versatile retrofit for steel holder head B applications Engineered for use with steel holder head B, the conversion sleeve adapts existing holders to accept interchangeable tooling with a cylindrical bore. The adaptor function lets workshops standardise on a single spindle taper while keeping a variety of toolholders in service. Where tool flexibility and quick reconfiguration are priorities, the conversion sleeve acts as a compact and durable solution to expand capability without extensive retooling. Compatibility and ease of integration make it a pragmatic choice for both repair and upgrade scenarios. Contact Metav Werkzeuge for precise retrofit guidance on this TECWERK conversion sleeve — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific holder combinations Technical data Article number: 2000832178NW Label: Morse taper sleeve for steel holder head B MT4 AD 40mm TECWERK Brand: TECWERK Packaging unit: 1 Facts Shaft execution: MT4 Diameter (d): 40 mm Bore diameter: 0 mm Packaging unit: 1 Design and special features For interchangeable holders with cylindrical bore With ejection screw Compatible with interchangeable holder Suitable for steel holder head B Intended for MT4 taper FAQ What machines is this sleeve compatible with? The TECWERK Morse taper sleeve is designed for MT4 taper systems and for use with steel holder head B; compatibility depends on matching the machine spindle or holder taper to MT4. How does the ejection screw work and why is it useful? The integrated ejection screw enables safe removal of the sleeve from the holder without impact, facilitating faster tool changes and reducing wear on the taper seating. Can this sleeve adapt existing holders to cylindrical-bore interchangeable tooling? Yes, the conversion function allows interchangeable holders with a cylindrical bore to be used where an MT4 taper seating is required, supporting flexible tool setups. Is this product suitable for heavy-duty turning operations? The MT4 taper and solid design provide a reliable clamping interface for many turning tasks; assessment of specific cutting parameters and toolholder combinations is recommended. What is the article number for ordering or reference? The article number is 2000832178NW and should be quoted when enquiring about the TECWERK conversion sleeve. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
48mm Quick-Change Toolholder Head With Eccentric Clamp, 20mm Bore, Hardened Gear - TECWERK
Take advantage of the combination of rapid tool changes, industrial-grade repeatability and hardened contact surfaces to keep set-up times low and process accuracy high. Order the TECWERK quick-change head directly via Metav Werkzeuge or consult Metav’s specialists for application advice and fast supply. Quick-change tool holder head Gr. A — 48 mm overhang, 20 mm bore (TECWERK) The Quick-change tool holder head Gr. A is a compact clamping solution for rapid interchange of turning tools in metalworking and precision turning applications. Eccentric clamping for secure fixation Repeatability 0.01 mm 40 indexable angles at 9° increments Hardened, ground serration and seating Reduce set-up time with precise, repeatable tool changes The head is engineered for fast tool swaps and consistent repositioning. Thanks to eccentric clamping and a specified repeatability of 0.01 mm, repositioning after tool changes is reliably precise, which reduces inspection cycles and downtime. For small-batch production and tool rooms where changeover speed and dimensional consistency matter, this head delivers measurable efficiency gains through fewer adjustments and less scrap. Flexible angular positioning for versatile machining A 40-tooth indexing system provides 40 distinct angular positions, each separated by 9°, enabling flexible orientation of the cutting edge without additional fixtures. The combination of indexed positions and compact design supports complex turning and profiling tasks while maintaining repeatable geometry. This indexed arrangement simplifies tool set-up, so multiple tool types can be arranged quickly and returned to a defined orientation. Durable contact surfaces and secure seating for process reliability Contact interfaces — the serration and the flat seating face — are hardened and ground to resist wear and maintain clamping fidelity under repeated cycles. The hardened surfaces help preserve the original fit and repeatability over prolonged use, supporting long-term process stability. Where repeatable accuracy is required across many change cycles, this durability reduces maintenance interventions and contributes to consistent part quality. Compact dimensions and straightforward height adjustment Designed with a 20 mm bore diameter for the central body and a maximum overhang of 48 mm, the head suits compact tool posts and restricted spaces without compromising reach. The tip height is set via a dedicated adjustment screw on the turning-tool holder, allowing precise alignment of the cutting point with minimal tools required. These compact mechanical features support tidy tool layouts and rapid alignment on the lathe. For tailored advice on integrating the TECWERK quick-change tool holder head into production workflows and for reliable supply from Emmerich, contact Metav Werkzeuge GmbH; their specialists will provide application support and fast delivery. Technical data Article number: 2000832151NW Manufacturer: TECWERK Product type: Quick-change tool holder head Packaging unit: 1 Core specifications Bore diameter: 20 mm Max overhang: 48 mm Repeatability: 0.01 mm Index positions: 40 Angle step: 9° Special features Eccentric clamping Adjustable tip height via set screw on toolholder Hardened and ground serration and seating 40-tooth steel holder head enabling 9° angle settings Rapid tool change capability FAQ How precise is the positioning after a tool change? The TECWERK quick-change tool holder head provides a repeatability of 0.01 mm, ensuring reliable repositioning after each swap. What bore size is required for mounting this head? A 20 mm central bore diameter is specified for the body, which matches standard compact tool posts and adaptors. How far can the tool project from the mounting centre? The maximum overhang is 48 mm, measured from the bore centre to the end edge of the interchangeable holder. How are angular adjustments made and how fine are the steps? Angular indexing is achieved via a 40-tooth system, giving 9° increments for defined orientation of the cutting tool. Are the contact surfaces durable for high-cycle use? Yes — the serration and the flat seating face are hardened and ground to resist wear and preserve clamping accuracy over repeated cycles. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
48–60mm Hollow Spindle Stop With 8–60mm Clamping Range, Rear-Inserted Adjustable - TECWERK
Take advantage of a compact solution that secures axial positioning inside hollow spindles, with a clamping range of 8–60 mm and a simple rear insertion method tightened by a special key; order via Metav Werkzeuge or consult the team for specification advice. Hollow spindle stop for spindles Ø48–60 mm — TECWERK, adjustable internal clamping (8–60 mm) A Hollow spindle stop for spindles Ø48–60 mm engineered for rear insertion into hollow spindles to provide adjustable internal clamping and reliable axial positioning in machining setups Rear insertion with special tightening key Secure internal clamping, reliable fit Adjustable axial position with quick release Clamping range 8–60 mm Precise internal clamping for repeatable setups The Hollow spindle stop for spindles Ø48–60 mm (SKU 4000832505NW) converts the inner diameter of a hollow spindle into an exact axial stop by means of an internal expansion mechanism. Inserted from the rear and tightened with a special key, the tightening screw forces the clamping jaws against the spindle's inner wall, producing a stable friction fit. This internal clamping method reduces axial play and supports repeatable positioning, which shortens setup times and increases process reliability in repetitive machining operations. Fast adjustment and straightforward operation Adjustment is achieved by releasing the stop with the same special key and sliding the unit to the required axial position before retightening. The simple mechanical principle means no additional tools or complex calibration are required, so set-up changes can be carried out quickly between operations. The combination of rear insertion, positive jaw contact and a single tightening point delivers a dependable hold while keeping the adjustment process intuitive for workshop staff. Built for practical workshop use and system integration Designed for compatibility with hollow spindles with diameters of 48–60 mm, this internal stop is suitable where compact, repeatable axial control is needed. The construction ensures a secure seat within the spindle bore and allows incremental repositioning without altering the spindle assembly. For purchasers seeking dependable components from a trusted supplier, Metav Werkzeuge provides a broad selection of precision workshop products and technical guidance to ensure correct integration into existing tooling systems. For TECWERK internal clamping solutions, contact Metav Werkzeuge for tailored advice and order support — Metav Werkzeuge can advise on suitability and supply the product directly Technical Data SKU: 4000832505NW Product type: Hollow spindle stop Designation: Hollow spindle stop for spindles Ø48–60 mm Brand: TECWERK Packaging unit: 1 Facts Clamping range: 8–60 mm Suitable spindle diameters: Ø48–60 mm Packaging unit: 1 piece Special features Inserted from rear into hollow spindle and tightened with a special key Tightening screw presses the jaws to the inner wall for secure seating Released and length-adjusted with the special key FAQ What spindle diameters is this stop suitable for? The hollow spindle stop is suitable for spindles with an internal diameter of 48–60 mm; this specification is integral to the TECWERK hollow spindle stop (SKU 4000832505NW). How is the stop installed and secured inside the spindle? The unit is inserted from the rear of the hollow spindle and tightened using a special key, which actuates the tightening screw to press the jaws against the inner wall and secure the stop. Can the axial position be adjusted during operation setups? Yes, the TECWERK hollow spindle stop can be released with the special key and slid to a new axial position, then retightened to restore the secure internal clamp. Does the product require additional components to operate? No additional components are required for the clamping function beyond the included tightening mechanism and the special key used to engage and release the jaws for axial adjustment. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
5 x 305 Chip Guard Shield Arm 350mm, Metal Mount - LOC-LINE
Take advantage of a compact 215 x 305 mm swarf shield mounted on a 350 mm arm for precise chip containment and reduced machine housekeeping. The combination of targeted protection and a generous reach supports uninterrupted machining cycles. Order the component directly via Metav Werkzeuge or consult the Metav team for application guidance. LOC-LINE swarf shield 215 x 305 mm with 350 mm arm LOC-LINE swarf shield 215 x 305 mm with 350 mm arm offers a focused chip barrier for machine-tool environments, combining a compact shield area with an extended mounting arm for flexible positioning. 215 x 305 mm compact swarf shield 350 mm arm length for extended reach LOC-LINE system component Reduce machine downtime with precise chip containment A correctly sized chip guard minimises the spread of swarf and coolant around the machine, which in turn reduces cleaning intervals and potential wear on ancillary components. The 215 x 305 mm shield delivers a defined protective area that is particularly effective for localised chip streams. Fitted on an arm with 350 mm reach, the unit enables close placement to the cutting zone without obstructing tool access, helping to maintain production flow and lower indirect maintenance costs. Flexible mounting for varied machining tasks The articulated mounting arrangement permits targeted positioning at different angles and distances from the workpiece, making the shield suitable for diverse machining operations on lathes, milling machines and small production centres. As a LOC-LINE system component, the guard integrates with modular mounting solutions commonly used in workshops, permitting fast reconfiguration when part geometries change. This adaptability supports both repeat production runs and one-off jobs where setup speed is essential. Cleaner, safer workplaces and straightforward integration Beyond visible cleanliness, a localised shield contributes to operator safety by keeping sharp swarf and splashing coolant away from access points and control panels. The device supports common workshop hygiene practices and helps to create a more orderly working environment. Installation requires only basic alignment on the chosen mounting point; the specification identifies the shield area and arm reach for planning purposes and compatibility checks with existing fixtures. Contact Metav Werkzeuge for tailored advice on sourcing the LOC-LINE swarf shield with 350 mm arm and to confirm suitability for specific machines or setups Technical data Article number: 4000833454NW Label: Späneschutzschild 215x305mm Arm-L.350mm LOC-LINE Manufacturer: LOC-LINE Product type: Swarf shield Packaging unit: 1 UID: 4000833454NW Dimensions & reach Shield size: 215 x 305 mm Arm length: 350 mm Features & materials Brand: LOC-LINE System compatibility: LOC-LINE components FAQ What size protective area does the shield provide? The shield offers a protective area of 215 x 305 mm, delivering a compact barrier suitable for localised chip streams. Can the arm reach be adjusted for different setups? The product includes an arm with a 350 mm reach that allows positioning at varying distances from the cutting zone for flexible placement. Is this component compatible with modular LOC-LINE fittings? Yes, the unit is designed as a LOC-LINE system component and integrates with common LOC-LINE mounting solutions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5-33mm Hollow Spindle Stop Adjustable Internal Clamping, Rear-Inserted With Special Key - TECWERK
Order a precise, quick‑adjust solution for hollow spindle work where axial positioning and a reliable clamp are essential; the device secures by expanding against the spindle’s inner wall and is adjusted with a special key for fast repositioning — available via Metav Werkzeuge for expert advice and prompt supply. Hollow spindle stop Ø 25–33 mm — TECWERK internal expandable clamping stop The Hollow spindle stop Ø 25–33 mm is a rear‑inserted internal clamping stop designed for axial positioning inside hollow spindles, expanding to lock securely against the inner wall for repeatable machining operations Rear-inserted design for hollow spindles Expansion clamp secures to inner spindle wall Special key allows tightening and release Adjustable axial position after release Precise, repeatable positioning for hollow‑spindle machining Engineered for applications that demand reliable axial stops, this internal clamping stop delivers secure seating by pressing its jaws against the spindle bore when the clamping screw is tightened. The rear insertion method lets the component be fitted from the back of the hollow spindle, removing the need for external fixtures. As a result, the device minimises axial play and supports consistent positioning during turning, milling or light assembly tasks, improving process reproducibility and reducing rework. How the expansion mechanism converts torque into a secure hold The clamping action is achieved by a threaded clamping screw: turning the screw with the supplied special key forces the jaws outward so they bear on the internal surface of the spindle. This simple mechanical principle creates a high‑friction contact that resists axial movement without complex hydraulic or pneumatic systems. For operators with limited metrology training, the mechanism is straightforward to use and maintain, while production engineers benefit from a compact solution that reduces setup time between part runs. Fast axial adjustment that keeps production moving Once the clamping screw is released with the special key, the stop can be shifted axially to the new position and re‑clamped in seconds. This adjustable axial position capability supports short changeover times and flexible fixturing strategies. For workshops aiming to increase throughput, the combination of quick release and secure reclamping helps keep cycle times low and tooling utilisation high, delivering a tangible efficiency advantage on mixed production lines. Durable, low‑maintenance design suited to workshop environments Built for use inside hollow spindles, the stop’s functional design focuses on robustness and serviceability rather than unnecessary complexity. The rear installation and mechanical expansion minimise exposed parts and simplify cleaning and inspection. Routine checks consist of verifying the clamping action and ensuring the special key operates freely; these simple maintenance steps support long‑term reliability and steady performance across batches and shifts. Contact Metav Werkzeuge for tailored advice and to secure the TECWERK Hollow spindle stop Ø 25–33 mm — call +49 2822 7131930 or email info@metav-werkzeuge.com for availability and technical guidance Technical data Article number: 4000832502NW Product: Hollow spindle stop Label: Hohlspindelanschlag f.Spindel‑D.25‑33mm Packaging unit: 1 Facts Spindle bore compatibility: Ø 25–33 mm Model / SKU: 4000832502NW Special features Inserted from the rear into the hollow spindle Clamping screw expands jaws to inner wall Tightening and release via special key Axial length adjustable after release FAQ What spindle bores are supported by this stop? The hollow spindle stop is suitable for spindles with an internal diameter of approximately 25–33 mm as indicated on the product label. How is the stop fixed inside the spindle? Fixing is achieved by tightening the clamping screw, which expands the jaws until they press against the inner wall; the operation is carried out using the supplied special key. Can the stop be repositioned quickly between operations? Yes, releasing the clamping screw with the special key allows axial repositioning and rapid re‑clamping for fast changeovers. Is specialised equipment required for installation? No specialised equipment is needed; the device is inserted from the rear and secured with the special key described in the product details. Does the stop provide a repeatable axial reference? The expansion mechanism offers a firm contact with the spindle bore, providing a repeatable axial reference suitable for many workshop applications. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
500mm Independent Four-Jaw Chuck With 4-M20 T-Slots, 350 rpm - Vertex
Take advantage of precise, independent clamping combined with a large 500 mm diameter and durable 105 kg construction for steady turning of irregular and heavy workpieces. Order the chuck directly via Metav Werkzeuge or consult the Metav team for specification support and supply from Emmerich. VKC-20 four-jaw independent chuck, 500 mm, Vertex The VKC-20 is a four-jaw independent chuck designed for secure clamping of irregular and heavy workpieces in medium-speed turning applications Independent four-jaw clamping for irregular parts 500 mm diameter for large workpieces Rated speed 350 r.p.m. for medium-speed turning 105 kg robust build with 4 M20 T-nuts Secure, flexible clamping for irregular components Independent jaw operation allows each jaw to be set individually, making the chuck especially suited to non-cylindrical or off-centre components. The four-jaw independent chuck design delivers stable seating and improved access to workpiece faces, which reduces the need for subsequent rework. For production scenarios where part geometry varies, this flexibility shortens setup time and supports consistent process flow while maintaining grip force where it is needed. Performance under load with controlled rotational speed With a rated speed of 350 r.p.m., the chuck balances rotational stability and cutting performance for a wide range of turning tasks. The combination of considerable clamping surface and moderate permitted speed helps to keep vibration low and surface finish high, particularly on large-diameter jobs. Emphasis on repeatability ensures that once a clamp setting is established, multiple successive parts retain the same reference relationship, aiding both quality control and throughput. Heavy-duty construction and secure mounting The substantial 105 kg mass of the unit, paired with a compact mounting pattern using 4 M20 T-nuts, contributes to mechanical rigidity and reliable attachment to the lathe face. A heavier chuck reduces susceptibility to deflection when machining robust workpieces, improving dimensional accuracy and tool life. The T-nut arrangement supports a secure bolted connection to the machine spindle or adaptor plate, simplifying integration into existing setups without compromise on stability. Suitable applications and the Metav advantage The chuck is appropriate for repair shops, jobbing lathes and light production lines where large, irregular or heavy workpieces are common. The design supports turning of varied geometries and materials where fixed three-jaw solutions are insufficient. Metav stands for the democratisation of precision: the distribution from Emmerich functions as a quality filter for the European market, combining technical expertise and logistics to supply reliable metrology and workshop equipment to industry and trade. Arrange supply and technical consultation through Metav Werkzeuge for tailored specification and rapid fulfilment from Emmerich – Metav’s advisors can confirm compatibility with the intended machine and process. Technical data Article number: VKC-20 GTIN: 4061905086335 Brand: Vertex Facts Diameter: 500 mm Maximum speed: 350 r.p.m. Weight: 105 kg Special features Four-jaw independent design T-nuts: 4-M20 Category: Vertex FAQ What is the chuck diameter? The VKC-20 four-jaw independent chuck is specified with a 500 mm diameter for handling large workpieces. What rotational speed is permitted? The VKC-20 is rated to operate at 350 r.p.m., suitable for medium-speed turning tasks. How is the chuck mounted to the lathe? Mounting is effected using the supplied 4-M20 T-nut pattern for a secure bolted connection to the machine face. Which workpieces are best suited to this chuck? The VKC-20 is intended for irregular, heavy or large components where independent jaw adjustment improves clamping and process stability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
50mm Morse Taper Sleeve MK4 For Steel Holder C With Ejection Screw - TECWERK
Take advantage of a robust, workshop-ready adapter that combines secure MK4 mounting, a 50 mm fit for cylindrical bores and a practical ejection screw to reduce changeover time. Order directly via Metav Werkzeuge or consult Metav’s technical advisors for fit confirmation and fast supply. TECWERK Morse taper sleeve – MK4 adapter with 50 mm bore and ejection screw The Morse taper sleeve is an MK4 taper adapter designed for steel holder head C and for use with changeable holders featuring a cylindrical bore. Adapter for MK4 shank, secure fit 50 mm diameter for cylindrical bores Integrated ejection screw for easy removal Compatible with steel holder head C Faster changeovers through precise taper adaptation The sleeve offers a clean mechanical solution for integrating modular changeable holders with existing toolholding systems. By adapting the MK4 taper to a cylindrical changeable-holder bore of 50 mm, the component reduces fixture modifications and shortens downtime. The hardened taper geometry ensures repeatable centring and precision seating, which translates into consistent run-out and improved part quality. This makes the adapter a rational choice where reliable alignment and swift tool swaps determine productivity. Secure retention and straightforward removal for workshop routines Retention is assisted by an integrated ejection screw, which enables controlled release without damaging the holder or fixture. The screw mechanism simplifies disassembly, lowering maintenance time and reducing the risk of seizing under heavy use. Where fixture accessibility is limited, the sleeve’s design supports dependable locking while permitting efficient removal—helping to avoid costly rework and to keep operations on schedule. Built for robust use in industrial environments Constructed for compatibility with steel holder head C and standard changeable holders, the adapter is intended for frequent handling and repetitive tool changes common in production workshops. The tailored interface to cylindrical bores protects mating surfaces and distributes contact forces to reduce wear. As a result, the sleeve contributes to longer service intervals for tooling assemblies and a lower total cost of ownership, while maintaining the mechanical integrity required for demanding machining tasks. For reliable compatibility checks and swift procurement, contact Metav Werkzeuge to confirm fit for existing MK4 tooling and secure the TECWERK Morse taper sleeve (SKU 2000832181NW) for the workshop supply chain. Technical data Article number: 2000832181NW Product: Morse taper sleeve Brand: TECWERK Shank execution: MK4 Facts Diameter: 50 mm Packaging unit: 1 Special features For changeable holders with cylindrical bore With ejection screw Suitable for changeable holders Suitable for steel holder head C FAQ What type of shank does the sleeve accept? The sleeve is designed for an MK4 shank and provides a secure, repeatable interface for MK4 toolholders. Which bore size is required for the holder? The adapter is made for a 50 mm cylindrical bore, matching changeable holders intended for that diameter. Is an ejection mechanism included? Yes, the sleeve features an integrated ejection screw to facilitate safe and simple removal of the holder. Can this sleeve be used with a steel holder head C? Compatibility with steel holder head C is stated; the sleeve is intended to pair with that holder type for robust clamping. Which SKU should be quoted when ordering or enquiring? Please reference SKU 2000832181NW when enquiring about the TECWERK Morse taper sleeve to ensure accurate identification. Manufacturer/Responsible: NORDWEST Handel AG; Robert-Schuman-Straße 17; 44263 Dortmund
50mm Tool Holder Adapter For AA Steel Tool Head, 12mm Clamping Height - TECWERK
Take advantage of precise mounting and a compact footprint: compatibility with AA steel holder heads plus a 12 mm mounting height and 50 mm overall length ensure reliable positioning for turning tools; order directly via Metav Werkzeuge or consult the technical advisers for integration support. Quick-change tool holder for AA steel head (TECWERK) – 12 mm mounting height, 50 mm overall length A quick-change tool holder for AA steel heads designed for secure clamping of turning tools in compact tool posts Compatible with AA steel holder head 12 mm mounting height for standard set-ups 50 mm overall length for compact installation Designed for turning tools Accurate positioning reduces setup time The quick-change holder is engineered for repeatable positioning, delivering consistent tool alignment through its defined 12 mm mounting height and compatibility with AA steel heads. This precision shortens set-up and recalibration cycles, which in turn improves throughput in series production. The clear specification of the mounting datum supports predictable machining results and simplifies quality checks, making the holder suitable for workshops striving for measurable process stability. Compact design improves access in confined spaces With a 50 mm overall length, the holder offers a compact solution where toolpost space is limited. The reduced overhang enhances rigidity at the cutting point, lowering vibration and supporting improved surface finish on turned components. For operations requiring close tool-to-workpiece clearances or multiple-tool stations, the compact footprint enables denser tooling layouts without compromising secure clamping or operator clearance. Fast changeovers and dependable retention The quick-change concept minimises downtime: exchange of turning tools is straightforward while retaining the reference position for subsequent operations. The defined mounting height and precise interface to the AA-type head ensure reproducible clamping and consistent cutting geometry after each change. For workflows where short tool-change intervals matter, this holder reduces non-productive time and maintains process accuracy across shifts. Simple integration and low-maintenance use Specified as a dedicated holder for turning tools, the component is ready for direct integration into compatible tool heads and existing fixtures. The standardised mounting height A: 12 mm simplifies planning and spare-part management, while the compact dimensions ease storage and replacement logistics. Supplied as a single unit per packaging, the design favours straightforward inventory control and predictable assembly in both production and maintenance routines. Contact Metav Werkzeuge in Emmerich for application guidance and to procure the TECWERK quick-change tool holder 2000832155NW; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 2000832155NW Manufacturer: TECWERK Product type: Quick-change tool holder Execution: for turning tools Compatible with: AA steel holder head Mounting height A: 12 mm Overall length: 50 mm Packaging unit: 1 Facts Overall length: 50 mm Mounting height A: 12 mm Packaging unit: 1 Special features For turning tools Compatible with AA steel holder head Quick-change design FAQ How does the holder align with AA-type heads? The quick-change tool holder is machined to interface precisely with AA steel holder heads, using the defined 12 mm mounting height as the reference for repeatable alignment. Is the 12 mm mounting height suitable for standard tool posts? Yes, the 12 mm mounting height is a standard datum designed for compatibility with common AA head configurations and predictable clamping geometry. Can the holder be used in multi-tool turret arrangements? The compact 50 mm overall length and quick-change design make the holder suitable for dense turret layouts where secure, repeatable positioning is required. What makes changeovers faster with this holder? The quick-change concept and defined mounting datum reduce adjustment time after tool swaps, delivering consistent cutting positions without lengthy realignment. Which SKU identifies this product for ordering? This product is listed as TECWERK quick-change tool holder, SKU 2000832155NW, for straightforward procurement and stock management. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
58-76mm Hollow Spindle Stop Adjustable Clamping Range 8-76mm, Rear-Inserted Design - TECWERK
Secure internal clamping, a compact rear-insert design and an adjustable 8–76 mm span deliver dependable axial positioning and quick on-machine set-up. Order the hollow spindle stop directly via Metav Werkzeuge or consult our specialists for configuration advice. Hollow Spindle Stop (for spindle Ø 58–76 mm) — Rear-insert design, adjustable axial clamp — TECWERK A Hollow Spindle Stop designed for rear insertion into a hollow spindle, providing secure internal clamping and fine axial adjustment for machining applications Rear-inserted design for compact spindle assembly Secure internal clamp via expanding jaws Adjustable length with special tightening key Precise internal clamping for repeatable positioning Installed from the spindle rear and tightened with a special key, the device converts axial torque into radial expansion so that the expanding jaws press against the spindle bore. This mechanism produces a secure fit with consistent concentricity, supporting reliable axial positioning and repeatability. The controlled radial contact reduces run-out and contributes to improved surface quality, which is particularly advantageous in operations where minimal deviation is critical. Fast adjustment and compact installation to reduce downtime Loosening and re-positioning are achieved with the same key, allowing the stop to be slid axially for quick length calibration or removal. Because the clamping action is internal, no external fixtures are needed and spindle overhang is minimised, helping to preserve balance during rotation. The compact installation therefore shortens set-up times and simplifies maintenance routines while maintaining stable clamping performance. Broad compatibility and practical workshop advantages Engineered for hollow spindles with an effective diameter window of 58–76 mm, the stop accommodates a wide range of mandrels within its 8–76 mm clamping envelope. The design emphasises a secure seating and straightforward serviceability, which helps to limit machine downtime during tool changes. Supplied through TECWERK and distributed by Metav Werkzeuge, the device combines pragmatic durability with workshop convenience for both single-piece work and serial production contexts. Discuss TECWERK hollow spindle stops with Metav Werkzeuge for tailored spindle sizing and secure internal clamping — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832506NW Brand: TECWERK Product type: Hollow spindle stop Packaging unit: 1 Core data Clamping range: 8–76 mm Special features Rear insertion with special key tightening Expanding jaws press to spindle inner wall for secure fit Release with key allows axial adjustment and length shift FAQ What spindle diameters is this stop suitable for? The hollow spindle stop is intended for hollow spindles with an effective diameter of 58–76 mm; the internal clamping envelope spans 8–76 mm (TECWERK, SKU 4000832506NW). How is the stop tightened and released? Tightening is performed from the rear with a special key: turning the clamping screw expands the jaws against the spindle bore; the same key is used to release and slide the stop axially. Does the design require external fixtures? No external fixtures are required; the internal expanding jaws secure the device inside the spindle, preserving compact installation and spindle balance. What operational benefits does the stop provide? The internal clamping method reduces run-out and overhang, improving concentricity and contributing to better surface finish and repeatability during machining. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
590mm Chip Hook 500mm Reach, 8mm Hook Ø, 130mm Shield Ø - TECWERK
Take advantage of the combination of extended reach, a protective shield and an ergonomic plastic handle for safer, faster chip removal in production and maintenance environments; Order the TECWERK chip hook directly via Metav Werkzeuge or ask our consultants if needed TECWERK chip hook L500 mm with 130 mm shield A TECWERK chip hook designed for controlled swarf collection and safe access in machine bays and tight workspaces Long 590 mm reach 130 mm protective shield 90 mm plastic handle 8 mm hook diameter Extended reach for efficient chip removal The tool delivers a measured working reach that improves process efficiency and reduces handling time. With a total length of 590 mm and a hook length of 500 mm, the device enables chip extraction from deeper fixtures and along machine beds without repeated repositioning. The combination of reach and a stiff 8 mm hook keeps engagement reliable during continuous use, so maintenance cycles are shorter and workflows remain uninterrupted. Built-in protection and ergonomic handling A 130 mm protective shield minimises scatter and shields operators from rebounding swarf, while the 90 mm plastic handle offers tactile control and simple handling when guiding the hook. In workshops where visibility and control matter, these elements reduce the risk of accidental contact and make routine cleaning safer. The shield also helps contain debris for easier collection, supporting a tidier workspace and fewer secondary cleaning steps. Practical applications and supply confidence This swarf hook is suited to general workshop and machine-room use where manual removal of chips is required, particularly in metalworking settings where reach and containment are essential. Its straightforward design supports quick inspection and cleaning, with no specialised maintenance needed. Supplied by Metav Werkzeuge from their Emmerich quality hub, customers benefit from established logistics and a broad product range that supports dependable restocking and consistent tool quality For tailored advice or to request delivery from Metav Werkzeuge’s Emmerich stock of TECWERK chip hooks, contact our specialists by e‑mail or phone for guidance on suitability and lead times Technical data Article number: 4000832895NW SKU: 4000832895NW Product type: Chip hook Manufacturer brand: TECWERK Facts Total length: 590 mm Hook length: 500 mm Hook diameter: 8 mm Protective shield diameter: 130 mm Handle length: 90 mm Packaging unit: 1 Special features Plastic handle (Ku.-Griff) Protective shield for swarf containment Long-reach design for deep-access chip removal Robust single-hook construction FAQ What is the total length and reach of the tool? The listed total length is 590 mm with a hook reach of 500 mm on the TECWERK chip hook (SKU 4000832895NW), suitable for accessing recessed machine areas. How does the protective shield help during work? The 130 mm protective shield reduces chip scatter and protects surrounding components, improving workplace cleanliness and operator safety when using the chip hook. What materials is the handle made from and how does it affect grip? The handle is a plastic grip of 90 mm length, designed to offer secure handling and control while guiding the hook through chips and debris. Is the tool suitable for heavy-duty metalworking environments? The tool’s 8 mm hook diameter and long-reach geometry make it appropriate for routine chip removal in metalworking shops; it is intended for manual swarf handling tasks rather than as a substitute for powered extraction. How should the tool be maintained? Maintenance consists of regular inspection and cleaning to remove accumulated swarf; the simple construction supports quick checks and keeps downtime to a minimum. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
60° Carbide Centre Point Fixed 125mm, DIN 806 - Vertex
Combine the durability of a carbide tip, the DIN 806 conformity and a precise 60° marking angle to ensure repeatable, high-quality centre marks in production. Order the tool directly via Metav Werkzeuge or consult our specialists for application advice. VLC-113 Centre punch tip — Carbide tip, 60° angle (Vertex) VLC-113 Centre punch tip for accurate centre marking and reliable alignment work in metalworking and toolmaking environments. Carbide tip for high wear resistance 60° angle for precise centre marking Compliant with DIN 806 standard Fixed design for stable positioning 125 mm length for extended reach Durable marking that keeps production running The carbide tip offers hard-wearing performance under repetitive use, providing a longer service life compared with conventional steel points. This translates into fewer tool changes and less downtime, supporting a more efficient workflow in busy workshops. The solid tip material resists deformation during impact, which maintains consistent mark geometry and reduces rework in subsequent drilling or turning operations. Accurate centre marks for reliable machining results A defined 60° angle creates reproducible centre points that help reduce drill wander and improve concentricity in follow-up operations. Conformance to DIN 806 ensures compatibility with established workshop standards and straightforward integration into inspection routines. The optimised geometry supports clean initial impressions on a range of ferrous and non-ferrous workpieces, improving repeatability and dimensional control in serial production. Stable handling and practical dimensions for everyday use The fixed design of the unit provides a secure seating during impact, enhancing positional stability for manual marking or use in mechanical holders. With an overall length of 125 mm, the tool reaches into recessed areas while maintaining a comfortable working envelope on the bench or in jigs. The compact mass contributes to controlled strikes and predictable energy transfer, delivering consistent marking depth without excessive operator effort. Quality that supports workshop confidence Manufactured by a recognised toolmaker, the component combines robust materials with proven design practice to deliver dependable performance. The combination of carbide tip, standardised geometry and industrial-grade construction helps reduce consumable turnover, offering a pragmatic balance of longevity and consistent results for professional toolrooms and maintenance departments. Contact Metav Werkzeuge for tailored advice on integrating Vertex centre punch tips into existing processes or to confirm suitability for specific materials and fixtures — Metav’s specialists are available via info@metav-werkzeuge.com or by phone for technical consultation Technical data Article number: VLC-113 GTIN: 4061905087264 Manufacturer: Vertex Dimensions & weight Length: 125 mm Weight: 0.4 kg Angle: 60° Materials & special features Tip material: Carbide Design: Fixed Standard: DIN 806 Brand: Vertex FAQ What materials is the VLC-113 centre punch tip suitable for? The VLC-113 centre punch tip by Vertex is designed as a hard-wearing marking point; suitability for specific materials should be confirmed against the intended application and strike energy. How does the 60° angle affect drilling preparation? A 60° marking angle produces a defined centre impression that helps reduce drill wander and facilitates more accurate pilot hole location when preparing components for machining. Is the tip replaceable or mounted permanently? This item features a fixed design; the carbide tip is permanently mounted to deliver stable positioning during repeated marking operations. Does the product meet any industry standards? The tool is produced to DIN 806, providing conformity with recognised workshop standards for marking and centre punch geometry. Can this centre punch tip be used in jig or fixture setups? The stable, fixed configuration and the 125 mm length make the component suitable for integration into many jigs and holder systems where a rigid marking point is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60° Carbide Centre Point Fixed 270mm, DIN 806 - Vertex
Take advantage of the combination of carbide tip durability, DIN 806 standard geometry and a robust fixed design for reliable locating and long service life; order the centre tip directly via Metav Werkzeuge or consult our specialists for application advice. Centre tip VLC-116 (fixed) — Carbide tip, 60° angle, Vertex A fixed centre tip VLC-116 designed as a precision locating element for turning and general workholding, providing durable axial support in machining and assembly operations. Fixed design for robust axial support Carbide tip for excellent wear resistance 60° standard tip angle per DIN 806 270 mm overall length for deep applications Durable carbide construction for consistent locating The VLC-116 is equipped with a carbide tip that provides outstanding wear resistance under repetitive contact and load. The hard tip material reduces deformation at the contact point, which keeps the locating geometry stable over long production runs and minimises rework. As a result, set-up intervals are extended and part repeatability improves, supporting higher throughput without compromising on dimensional accuracy. Standardised angle for predictable mating and interchangeability Manufactured to the DIN 806 specification, the centre geometry features a 60° tip angle that ensures consistent mating with standard lathe centres and housings. That standardisation simplifies tool selection and reduces the need for trial fits, while the defined geometry assists in transmitting axial load predictably. For workshops seeking process reliability, the use of standard angles cuts adjustment time and supports reproducible clamping conditions. Fixed design and extended reach for demanding setups The fixed construction delivers rigid axial support with a low parts count, lowering the risk of loosening or play in heavy-duty applications. With an overall length of 270 mm, the component suits deeper set-ups where extended reach is needed, while the robust build maintains concentricity under load. This combination of length and rigidity makes the item suitable where secure, repeatable support is required across extended workpiece overhangs. Clear handling and long service life simplify maintenance Thanks to the carbide tip and solid construction, the centre tip requires low maintenance and retains functional accuracy across many cycles. Regular inspection is straightforward: check the contact face for visible wear and confirm concentric engagement. The Vertex-crafted component supports predictable downtimes and reduces the frequency of replacements, helping to keep machine uptime high in production environments. For dependable locating with Vertex quality, contact Metav Werkzeuge to discuss the VLC-116 centre tip and receive tailored application guidance from our consultants via info@metav-werkzeuge.com or by phone Technical data Article number: VLC-116 GTIN: 4061905085703 Manufacturer: Vertex Core data Length: 270 mm Tip angle: 60° Weight: 5.7 kg Special features Tip material: carbide Standard: DIN 806 Type: fixed centre tip FAQ What material is used for the tip and how does it benefit machining? The tip of the centre tip VLC-116 is made from carbide, providing high wear resistance and prolonged service life under repetitive contact, which preserves locating accuracy. Is the geometry compatible with industry standards? Yes, the VLC-116 centre tip is manufactured to DIN 806 and features a 60° tip angle for predictable mating with standard lathe centres and fixtures. Can the fixed centre tip be used for deep setups? The 270 mm overall length of the VLC-116 makes it suitable for deeper support applications where extended reach and rigid axial support are required. Is the centre tip designed for heavy-duty use? The fixed design and carbide contact face of the VLC-116 ensure robust axial support and long-term durability for demanding workshop operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60° Carbide Centre Punch Fixed Tip, DIN 806, 100mm - Vertex
Combining a carbide tip, a 60° geometry and a 100 mm fixed shaft delivers precise, repeatable centre marks with minimal maintenance; order the tool directly via Metav Werkzeuge or consult the Metav team for specification advice. Centre punch VLC-112 — fixed marking tool with carbide tip (Vertex) Centre punch VLC-112 is a fixed marking tool for producing accurate pilot indents and reliable centre marks in professional workshop environments Carbide tip for long-lasting centre marks 60° tip angle for precise positioning Conforms to DIN 806 for standardised quality 100 mm fixed shaft for stable handling Precise, repeatable marking for reliable downstream processing The carbide tip is engineered to retain its profile under frequent use, which supports consistent indentation geometry and aids repeatable drill starts. The 60° tip angle focuses impact energy into a defined point, reducing lateral slip during marking. Compliance with DIN 806 provides an industry-recognised benchmark for dimensions and geometry, simplifying tool selection in standardised production environments. These attributes reduce alignment errors and support higher first-pass accuracy in subsequent machining steps. Robust construction that minimises intervention and downtime A solid, fixed shaft design with a 100 mm overall length provides mechanical stability during hand or machine-supported application. The integral carbide point eliminates a wear-prone interface, lowering the need for frequent part replacements and maintenance interventions. The lightweight 0.2 kg construction ensures manageable handling while maintaining sufficient mass for clear, repeatable impressions. The combination of durable materials and straightforward design contributes to steady availability at the workbench and predictable service intervals. Seamless fit into workshop inventory and procurement workflows Standardised dimensions and the industry code facilitate catalogue management and reordering under the SKU VLC-112. The compact specification and proven materials make the marking tool suitable for integration alongside other precision hand tools and layout equipment. Documentation of technical data supports transparent procurement decisions and enables workshop managers to align the tool with quality-control routines. Supplied by a specialist distributor, the item benefits from centralised stocking that acts as a quality filter for the European market. Choose the Vertex fixed centre punch VLC-112 with a carbide tip for durable, accurate centre marking — contact Metav Werkzeuge for procurement advice and reliable supply from Emmerich (info@metav-werkzeuge.com / +49 2822 7131930) Technical data Article number: VLC-112 GTIN: 4061905084379 ECLASS: 21022304 Manufacturer: Vertex Dimensions & weight Length: 100 mm Tip angle: 60° Weight: 0.2 kg Materials & standards Tip material: carbide Standard: DIN 806 Design: fixed centre punch FAQ What does "fixed" mean for this marking tool? The Vertex centre punch VLC-112 is offered in a fixed design, which means the tip is integral to the shaft and not intended for replacement, favouring stability and consistent impressions. Is the tip material suitable for heavy use? Yes, the tip of the Vertex VLC-112 is made from carbide, a hard material selected for wear resistance and long service life under repeated marking cycles. Which standard does the tool adhere to? The tool conforms to DIN 806, ensuring standardised geometry and compatibility with workshop specifications for centre punches. What are the key dimensions of the tool? The Vertex VLC-112 has a 100 mm overall length and a 60° tip angle; the listed weight is 0.2 kg. What is the intended application for this punch? The Vertex centre punch VLC-112 is designed for precise centre marking and producing pilot indents prior to drilling in professional workshop settings. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60° Centre Punch Live Tailstock For High Speeds 1500 rpm, MT6A - Vertex
Benefit from the combination of high-speed capability and a runout tolerance of 0.005 mm to secure repeatable concentricity in demanding turning operations; order the component directly via Metav Werkzeuge or request tailored advice from our consultants. VLC-MT6A live centre (MT6A taper) by Vertex — high-speed, 60° point A VLC-MT6A live centre designed for high-speed turning and lathe support, providing a 60° centre point and reliable rotational performance for metalworking applications High-speed capability 1,500 r.p.m Precision runout ≤ 0.005 mm 60° centre point for robust support 380 mm overall length Consistent concentricity for precision turning The live centre delivers a measurable improvement in part accuracy by maintaining a runout of 0.005 mm, which reduces rework and scrap on turned components. This level of precision ensures that concentric features remain within tight tolerances, making the device suitable where axial alignment directly affects surface finish and assembly fit. The design targets repeatable results in batch production and one-off work alike, translating machine performance into verifiable product quality. Durable geometry and installation benefits A 60° centre angle provides a standardised contact geometry that supports a wide range of workpiece profiles while promoting even load distribution at the point of contact. With an overall length of 380 mm, the centre offers extended reach where deeper support is required, without compromising stability. The built-in MT6A taper allows straightforward mounting in compatible tailstocks or adapters, simplifying setup and reducing preparation time before machining operations begin. Operational efficiency and compatibility in the workshop Rated for continuous rotation up to 1,500 r.p.m., the unit is geared towards medium to high-speed lathe work where rotational balance and bearing performance matter. The MT6A specification ensures compatibility with standard spindles and holders used in industrial turning, promoting quick interchangeability and minimal downtime. By combining controlled rotational speed with the verified runout and a defined centre angle, the component helps to streamline production flow and improve first-pass yield on turned parts. Contact Metav Werkzeuge for a tailored consultation on delivery from our Emmerich warehouse and expert advice for integrating the Vertex VLC-MT6A live centre into existing turning processes — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VLC-MT6A GTIN: 4061905086847 Manufacturer: Vertex Type: MT6A Facts Accuracy / runout: 0.005 mm Maximum speed: 1,500 r.p.m. Centre angle: 60° Length: 380 mm Weight: 15.6 kg Special features Live centre for continuous rotation at high speeds MT6A taper for standard tailstock mounting 60° centre point for conventional turning support Suitable for general lathe operations and concentric support FAQ What level of runout can be expected from this live centre? The Vertex VLC-MT6A live centre specifies a runout of 0.005 mm, ensuring tight concentric accuracy for turning tasks. Is the VLC-MT6A suitable for high-speed lathes? The unit is rated for continuous rotation up to 1,500 r.p.m., making the VLC-MT6A appropriate for medium to high-speed lathe applications within that speed range. Which taper does this centre use for mounting? The centre uses an MT6A taper, which is compatible with standard MT6A tailstocks and holders commonly found in industrial turning setups. How does the 60° centre angle affect workpiece support? A 60° centre angle provides conventional point contact that distributes load effectively and supports a wide range of workpiece geometries during turning. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60° Centre Punch With Interchangeable Tips MT2 Shank Stainless Steel 127mm - Vertex
Take advantage of precise centre marking, robust stainless steel construction, and a MT2 taper that ensures straightforward fitting in standard tailstocks; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Centre punch VLC-312 — Vertex centre punch with interchangeable tips and MT2 taper The Centre punch VLC-312 is a precision marking tool designed for creating consistent, defined centres prior to drilling and machining, suitable for workshop and light industrial applications. Solid stainless steel construction MT2 taper for standard headstocks 60° hardened centre tip Interchangeable tips for versatility Precise marking that reduces drilling errors and rework A defined centre mark shortens setup time and improves first-pass drilling accuracy: the tool delivers high repeatability thanks to its measured tolerance of 0.008, which ensures that marks stay consistent between operations. The 60° tip geometry concentrates force to produce sharp, visible centres on metal and other machinable surfaces, reducing the tendency for drill bits to wander. For production environments where reliability and predictable results matter, this precision marking device contributes directly to process efficiency and lower scrap rates. Durable design built for everyday workshop use Constructed from stainless steel and balanced at a length of 127 mm with a mass of 0.9 kg, the tool provides a solid feel and long service life under normal workshop conditions. The integrated MT2 taper allows secure seating in standard tailstocks or dedicated holders, while the rated rotational capacity of 4,000 r.p.m. supports use in revolving centres where appropriate. Robust materials and a compact form factor reduce maintenance intervals and deliver stable performance in repetitive marking tasks. Interchangeable tips for flexible applications and fast maintenance Equipped with interchangeable tips, the system adapts to different materials and marking requirements without replacing the entire tool. Tips can be swapped quickly to match workpiece hardness or to restore a crisp mark after wear, limiting downtime and keeping production moving. This modularity also reduces inventory needs: one handle accommodates multiple tip geometries, which is especially useful in mixed-production shops. The SKU VLC-312 identifies the exact configuration for spare parts and replacement tips. For reliable, workshop-ready marking select the Vertex VLC-312 and contact Metav Werkzeuge for tailored advice or to secure your supply directly — email info@metav-werkzeuge.com or call +49 2822 7131930 for consultancy and stock information Technical data SKU: VLC-312 GTIN: 4061905084461 Manufacturer: Vertex Facts Material: stainless steel Length: 127 mm Weight: 0.9 kg Accuracy: 0.008 Maximum speed: 4,000 r.p.m. Tip angle: 60° Taper: MT2 eClass: 21022304 Special features Interchangeable tips included Hardened centre tip Suitable for tailstock mounting Compact, workshop-oriented design FAQ What tip angle does the tool use? The tool features a 60° centre tip, providing a precise and concentrated mark suitable for most drilling preparations with the Vertex VLC-312 centre punch. Is the taper compatible with standard tailstocks? Yes — the device uses an MT2 taper for secure mounting in standard tailstocks and compatible holders. Are the tips replaceable and does the set include spare tips? The design includes interchangeable tips, allowing fast replacement to suit different materials and to restore marking quality; spare tips are available for the VLC-312. What is the maximum recommended rotational speed? The tool is specified for use up to 4,000 r.p.m., where revolving centre applications require controlled rotational speeds. What is the main body material and typical dimensions? The body is made of stainless steel, with a length of 127 mm and weight of 0.9 kg, offering a durable, workshop-ready tool. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60° Centre Punch With Interchangeable Tips Stainless Steel MT4 Shank 182mm - Vertex
Benefit from the combination of corrosion-resistant stainless steel, a precise 60° tip geometry and economical replaceable tips for dependable centre marking and reduced tooling costs; order directly via Metav Werkzeuge or consult our specialists for application advice. Centre punch tip VLC-314 — 60° precision point with MT4 shank by Vertex Centre punch tip VLC-314 is a machine-ready marking tip designed for accurate centre punches and repeatable positioning in workshop and production environments. Stainless steel construction for longevity 60° tip for accurate centre marking Replaceable tips reduce tooling costs MT4 shank for secure machine mounting Consistent centre marks for reliable machining The 60° tip geometry provides a defined contact profile that reduces drill wander and ensures repeatable start points for machining operations. With an accuracy of 0.008 mm, the component layout remains consistent from part to part, supporting process reliability and lower scrap rates. This marked precision is especially valuable where subsequent drilling or reaming operations require exact centring; the controlled initial indentation simplifies downstream tool guidance and reduces rework. Built for workshop durability and straightforward servicing Manufactured from stainless steel, the unit resists corrosion and maintains dimensional stability under shop-floor conditions, which extends service intervals and lowers life‑cycle costs. The replaceable tips design keeps consumable costs down and shortens maintenance downtime since worn points are exchanged rather than the entire tool. With a length of 182 mm and a robust mass of 2 kg, the tool offers substantial hand‑feel and balance when used in fixtures or machine spindles, delivering a reliable tactile reference during positioning. Secure mounting and controlled operation for machine use The MT4 shank (Morse taper 4) guarantees concentricity and secure seating in compatible spindles and tailstocks, reducing runout during marking cycles. A rated rotational/operational parameter of 2500 rpm indicates suitability for machine-mounted processes where rotational stability is required; the combination of taper fit and mass supports steady contact without chatter. Supplied by Vertex, the design focuses on compatibility with common workshop tooling and on delivering predictable results in repetitive production tasks. For dependable, production-ready centre marking with replaceable tips from Vertex, contact Metav Werkzeuge in Emmerich for tailored advice and reliable delivery — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VLC-314 GTIN: 4061905085345 Designation: Centre punch tip with replaceable tips Brand: Vertex Key measurements Length: 182 mm Weight: 2 kg Tip angle: 60° Accuracy: 0.008 mm Max speed: 2500 rpm Materials & features Material: Stainless steel Shank: MT4 (Morse taper 4) Replaceable tips included FAQ What is the tip angle and why does it matter? The centre punch tip VLC-314 features a 60° angle; this geometry creates a stable indentation that helps guide drills and reduces lateral slippage during initial penetration. Can the point be replaced and what are the benefits? Yes, the VLC-314 comes with replaceable tips; swapping worn points preserves the tool body, reduces consumable costs and shortens maintenance cycles in production use. Is the shank compatible with standard machine spindles? The tool uses an MT4 (Morse taper 4) shank for secure seating in compatible spindles and tailstocks, ensuring concentricity and low runout during marking operations. What level of accuracy can be expected for repeat marks? Repeatability is specified at 0.008 mm, so the centre punch tip VLC-314 is suitable where tight positional consistency is required between successive operations. Who manufactures this tool and where is it produced? The product is supplied by Vertex under the SKU VLC-314; Vertex produces precision tooling designed for workshop and industrial applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60° Live Centre For High Speeds MT4A, 0.005mm Accuracy, 3000rpm - Vertex
Take advantage of a compact, high-speed support solution that combines 0.005 mm repeatability, a 3,000 rpm rating and a standard MT4 taper for reliable lathe workholding; the result is consistent concentricity and fewer rejects during turning operations. Order the VLC‑MT4A live centre directly via Metav Werkzeuge or ask our consultants if needed. VLC‑MT4A Live centre — high‑speed, high‑precision MT4 taper (Vertex) The VLC‑MT4A is a revolving live centre designed to support workpieces in lathe operations where high rotational speed and tight runout tolerances are required High precision 0.005 mm repeatability Rated for sustained 3,000 rpm operation MT4 taper for straightforward mounting 60° centre angle for standard turning Robust 212 mm length and 2.2 kg mass Precision where consistent results are required A live support that maintains concentricity directly reduces scrap and rework costs. The VLC‑MT4A delivers a documented 0.005 mm accuracy, which translates into stable runout behaviour even under demanding cutting conditions. For machinists and production engineers this means predictable part geometry and fewer inspection rejects. The listed tolerance should be understood as the manufacturer’s repeatability figure under correct mounting and routine maintenance; it provides a clear, measurable basis for process capability assessment. Designed to stay steady at high speeds Built for applications that demand elevated spindle speeds, the unit is specified for operation at 3,000 rpm. The combination of a 60° centre angle and the MT4 taper ensures secure seating and correct workpiece support for common turning tasks. High‑speed compatibility reduces vibration and heat build‑up when matched with appropriate lathe balance and tooling, enabling smoother surface finishes and improved tool life. For shops converting batch runs to faster cycle times, the component’s speed rating supports greater throughput without compromising positional accuracy. Practical workshop benefits from a compact build With a length of 212 mm and a mass of 2.2 kg, the assembly integrates easily into existing setups while providing mechanical stability for medium‑duty turning. The compact footprint aids in accessibility for longer workpieces and simplifies storage when not in use. As a revolving centre intended for frequent use in toolrooms and small series production, it balances rigidity and manoeuvrability to suit both maintenance intervals and typical shop‑floor handling routines. Contact Metav Werkzeuge for application advice, spare part inquiries or to request a supply proposal for the Vertex VLC‑MT4A live centre from our Emmerich warehouse Technical Data Article number: VLC‑MT4A GTIN: 4061905085123 Manufacturer: Vertex ECLASS: 21022304 Facts Accuracy: 0.005 mm Maximum speed: 3,000 rpm Length: 212 mm Weight: 2.2 kg Centre angle: 60° Special features Revolving live centre for high speeds MT4 taper for direct mounting Designed for lathe workpiece support FAQ What applications are typical for this live centre? The VLC‑MT4A live centre is intended for lathe support tasks where controlled runout and higher spindle speeds are needed, such as finish turning and medium‑series production on CNC and conventional lathes. Is the unit compatible with an MT4 spindle? Yes, the design uses an MT4 taper to seat directly in MT4 sockets and adaptors, ensuring correct alignment and secure mounting for standard lathes. What does the stated 0.005 mm accuracy refer to? The 0.005 mm figure denotes the repeatability level for the live centre’s support point under proper mounting and normal operating conditions, providing an objective measure for expected concentricity. Can the live centre be used for long, slender workpieces? Its 212 mm length and robust mass make it suitable as a support for longer parts where intermediate support improves stiffness and turning stability. Who manufactures this product and where is it produced? Vertex manufactures the VLC‑MT4A live centre; the item is listed under SKU VLC‑MT4A and supplied by Vertex. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60° Live Centre For High Speeds MT4B, 0.005 mm Accuracy, 218 mm Length - Vertex
Take advantage of secure workpiece support at high spindle speeds, precise runout of 0.005 mm and a standard Morse taper MT4 interface for straightforward mounting; order the live centre directly via Metav Werkzeuge or ask our consultants for application advice. Live centre VLC-MT4B (Morse taper MT4, 60°) by Vertex VLC-MT4B is a rotating live centre designed to support workpieces at elevated spindle speeds in turning applications, featuring a 60° support angle and a robust MT4 taper. High-speed rotation up to 3,000 r.p.m. Precision runout 0.005 mm Morse taper MT4 mount 60° centre angle for secure support Precision and stability for high-speed turning The VLC-MT4B live centre combines tight concentricity with a design optimised for elevated spindle speeds, giving stable support during turning operations. The specification 0.005 mm runout ensures minimal wobble at the workpiece, which reduces chatter and improves surface finish. By maintaining concentric support, the component contributes to consistent part geometry and reduces rework rates, translating directly into improved process efficiency on production and jobbing lathes. Technical reliability that reduces set-up time A balanced construction rated to 3,000 r.p.m. provides dependable performance when the machine runs at higher speeds. The Morse taper MT4 interface offers a familiar, secure mounting method for rapid insertion and removal, cutting downtime during tool changes. Runout tolerance is a key technical parameter: it denotes the variation in rotational centre and, at 0.005 mm, supports precision turning where tight dimensional control is required. This combination of features supports faster cycle times without sacrificing accuracy. Practical compatibility and workshop advantages With an overall length of 218 mm and a mass of 2.2 kg, the rotating centre is long enough to support extended workpieces while remaining compact for most standard tailstock bores. The 60° centre angle conforms to conventional centre drills, ensuring reliable load transfer and repeatable seating. Designed for routine workshop use, the item simplifies set-up, reduces vibration and extends tool life by stabilising the workpiece; the familiar taper and robust build make integration into existing workflows straightforward. For application guidance and delivery from Metav Werkzeuge in Emmerich, contact our consultants to match the VLC-MT4B to specific turning tasks and schedule supply or technical consultation. Technical data SKU: VLC-MT4B GTIN: 4061905085710 Brand: Vertex Accuracy: 0.005 mm Max speed: 3,000 r.p.m. Length: 218 mm Weight: 2.2 kg Angle: 60° Special features Type: MT4B Designation: Live centre (rotating) for high speeds Description: Körnerspitze — rotating centre for elevated spindle speeds FAQ What maximum spindle speed is recommended for this live centre? The VLC-MT4B live centre from Vertex is specified for operation up to 3,000 r.p.m., making it suitable for many medium- and high-speed turning operations. How precise is the rotational accuracy of the centre? The rotating centre offers a runout tolerance of 0.005 mm, which supports high-precision turning and improved surface finishes for production and precision workshops. Which taper does the centre use for mounting? The centre uses a Morse taper MT4, a standard mount that provides secure, repeatable seating in compatible tailstocks and adaptors. Will this centre fit standard 60° centre drills and workpiece seats? Yes, the 60° support angle matches conventional centre drills and seating angles, ensuring consistent load transmission and reliable locating. What are the physical dimensions relevant for setup? Key dimensions are a length of 218 mm and a weight of 2.2 kg, which assist in determining reach and balance for specific turning setups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
60° Live Centre High-Speed, 2500 rpm, Accuracy 0.005 mm, MT5A Three-Point Running Tip - Vertex
Take advantage of the combination of high-speed capability, 0.005 mm runout precision and a robust MT5 taper for reliable support of turned workpieces; order the revolving centre directly via Metav Werkzeuge or ask our consultants for integration advice. VLC-MT5A Revolving live centre with MT5 taper — High-speed 2,500 r.p.m., 60° tip The VLC-MT5A is a revolving live centre designed for lathe support in high-speed turning applications, offering a 60° centring tip and MT5 taper for secure mounting in industrial workshops High-speed operation up to 2,500 r.p.m Precision runout 0.005 mm MT5 taper for secure mounting 60° centring tip for standard workpieces Designed for high-speed production without compromise The VLC-MT5A is engineered for high-speed lathe tasks where stable rotation and low vibration matter. With a rated spindle capability of 2,500 r.p.m., the component helps maintain consistent cutting conditions at elevated speeds, reducing cycle time and improving surface finish. The revolving mechanism is balanced for rotational stability, which supports faster feed rates and steadier machining of medium- to long-length shafts. Consistent accuracy for demanding turning operations Built around a low runout specification of 0.005 mm, this revolving centre provides measurable benefits for precision turning. Reduced radial deviation keeps the workpiece concentric to the spindle axis, which lowers rework rates and ensures repeatable tolerances on turned diameters. For inspection-sensitive components, the precision support afforded by the centre helps maintain batch uniformity and reduces downstream quality checks. Secure mounting and compatibility that simplify set-up The MT5 taper interface guarantees a rigid, repeatable connection with compatible tailstock spindles and adapters. The 60° tip geometry is industry-standard for centring most shafts and bar stock, enabling reliable axial support during turning and light grinding. The centre’s 264 mm overall length and stable mass contribute to secure seating and reduced deflection on longer workpieces, supporting consistent process control across production runs. Robust construction for workshop longevity and ease of use Weighing 4.5 kg, the unit reflects a substantial, workshop-ready build that resists chatter and thermal distortion during extended operations. The revolving bearings are specified to withstand continuous rotation under load, minimising maintenance intervals and supporting uptime in busy machine shops. Clear identification of taper and tip geometry streamlines tool selection and storage, helping organise a single-source tooling strategy for precision departments. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Vertex VLC-MT5A revolving centre into production and to arrange a detailed technical review with our specialists Technical data SKU: VLC-MT5A GTIN: 4061905086694 Brand: Vertex Description: Revolving live centre for high spindle speeds Core data Accuracy (runout): 0.005 mm Maximum speed: 2,500 r.p.m. Overall length: 264 mm Tip angle: 60° Weight: 4.5 kg Features MT5A taper interface 60° centring tip Suited to high-speed applications Manufactured by Vertex FAQ What maximum spindle speed is recommended for this revolving centre? The VLC-MT5A revolving centre is specified for operation up to 2,500 r.p.m., which supports typical high-speed lathe operations encountered in production workshops. How precise is the centring performance of the centre? Precision is indicated by a runout of 0.005 mm for the Vertex VLC-MT5A, ensuring tight concentricity for demanding turning tasks. Which taper does the centre use and how does it mount? The unit features an MT5 taper, allowing direct seating into compatible MT5 tailstock spindles or adapters for secure and repeatable mounting. Is the 60° tip suitable for all turning tasks? A 60° tip is the standard centring geometry for a wide range of shafts and bar stock; the Vertex centre’s tip provides reliable axial support for general-purpose turning. What workshop benefits does the VLC-MT5A deliver? The VLC-MT5A offers a balance of precision, high-speed capability and rigid mounting to reduce rework, increase throughput and maintain consistent part quality in industrial environments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com