Robust Gorilla Glass on a left-handed layout delivers secure sample support and reliable illumination compatibility, ideal for repeatable microscopy workflows — order via Metav Werkzeuge or request tailored advice from our consultants. DX.9501-L left-handed microscope stage with Gorilla Glass and specimen holder — Euromex The DX.9501-L is a left-handed microscope stage engineered for precise sample positioning, featuring a Gorilla Glass work surface, a central aperture for transmitted light and an integrated specimen holder for stable handling. Gorilla Glass work surface for scratch resistance Left-handed layout for ergonomic handling Integrated specimen holder and aperture for illumination Robust mounting for stable positioning Durable surface for dependable sample handling The stage is fitted with a Gorilla Glass top that combines high hardness with excellent optical clarity; this surface reduces wear and is scratch resistant, so samples remain flat and visible over prolonged use. For routine inspection tasks, the durable top lowers maintenance requirements and extends service intervals, which supports steady throughput in busy laboratories. The material’s optical stability also helps to maintain consistent image quality when used with transmitted or reflected illumination. Ergonomic left-handed configuration to streamline workflows A left-handed layout positions controls and the specimen holder to suit left-handed operation, improving ergonomic access and reducing repositioning time during repetitive tasks. In workstations where left-handed handling is the norm, this orientation supports smoother sample exchange and faster processing. The design emphasises efficient handling while preserving precise alignment, so handling speed is increased without compromising positional accuracy. Secure specimen fixation and illumination compatibility An integrated specimen holder secures slides and small samples while the central aperture provides compatibility with transmitted-light setups; this enables brightfield or other illumination techniques to be used without additional modifications. The mounting is engineered for stable positioning, limiting sample drift during inspection and ensuring reproducible observation conditions. For applications that require quick changeovers and consistent sample presentation, the combination of holder and aperture reduces setup time and improves data reliability. Contact Metav Werkzeuge for tailored advice on integrating the DX.9501-L into existing microscope stations, or request detailed technical information by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: DX.9501-L SKU: DX.9501-L Manufacturer: Euromex Facts Image file size: 93995 Special features Gorilla Glass work surface Central hole / aperture for transmitted light Integrated specimen holder Left-handed configuration Microscopy accessory: microscope stage FAQ Is the stage suitable for transmitted-light microscopy? The DX.9501-L includes a central aperture specifically to permit transmitted-light methods, making the stage compatible with brightfield illumination setups. Can the left-handed stage be used in a right-handed workstation? The stage is designed for left-handed operation; while it can be installed in a right-handed workstation, the ergonomic benefits will be reduced compared with a right-handed configuration. What advantage does Gorilla Glass provide for a microscope stage? Gorilla Glass offers high hardness and optical clarity, providing a scratch-resistant and stable contact surface that supports repeatable imaging and reduces maintenance. Is the specimen holder adjustable for different slide sizes? The integrated specimen holder is intended for secure fixation of standard slides and small samples; adjustability details should be confirmed with Metav Werkzeuge for specific sample types. Who supplies technical information and spare parts for this stage? Technical enquiries and spare-part information can be obtained from Metav Werkzeuge, which provides product guidance and ordering support for microscopy accessories. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Data inconsistency: the product specifies "Euromex" as the manufacturer, but this brand is not included in the authorised manufacturer list provided, which raises concerns about the accuracy and validity of the information supplied for this product. We are unable to generate a compliant product description due to this discrepancy, as it is essential to ensure all details align with the approved standards and regulations. Please supply a manufacturer from the approved list or correct the manufacturer information so the description can be produced accurately and in compliance with the necessary guidelines, ensuring the product meets all required specifications and standards for approval.

Combining precise PID temperature control with compatibility for stereo microscopes, this heated stage delivers stable sample conditions up to 50 °C; order directly via Metav Werkzeuge or contact our consultants for integration advice. Euromex AE.5168-NZ — microscope stage with PID-controlled heating up to 50 °C Euromex AE.5168-NZ is a heated microscope stage designed for integration with stereo microscopes, providing regulated warming for temperature-sensitive specimens. PID-controlled temperature stability up to 50 °C Integrated design for stereo microscopes Supplied only with new microscopes SKU AE.5168-NZ for straightforward identification Controlled temperature for consistent imaging quality The stage features a PID controller that actively monitors and adjusts heating to maintain a set temperature, ensuring stable conditions throughout prolonged observations. Maintaining a stable sample temperature reduces focal drift and dimensional changes that can compromise high-magnification imaging. The regulated heating, specified to reach 50 °C, is particularly useful when handling materials or biological samples that require a defined thermal environment to prevent condensation, stress-induced distortion or measurement errors. The regulated heat output is described in clear, comparable terms so planners and technicians can assess suitability for their workflows. Engineered for seamless integration with stereo microscopes Designed specifically as a microscope stage for stereo microscopes, the unit is intended to be supplied together with new microscope assemblies rather than as an aftermarket retrofit. This approach guarantees mechanical and electrical compatibility at installation and reduces commissioning time. The compact configuration simplifies alignment and preserves the optical working distance typical for stereo systems. Because the stage arrives pre‑matched to the instrument, commissioning is straightforward and thermal coupling is optimised for reliable performance during routine inspection and precision tasks. Practical advantages for laboratory and production use Beyond temperature control, the stage supports reproducible working conditions that aid process control and quality assurance. By keeping environmental variables more stable, the stage helps to shorten set-up times and minimise rework caused by thermally induced positional changes. The integrated heating is valuable where repeatable imaging or assembly under controlled warmth speeds adhesive curing or reduces brittle behaviour in certain polymers. The engineering focus on stability and compatibility makes this solution appropriate for inspection benches in research, quality control and small-series production environments. Contact Metav Werkzeuge for detailed configuration options or to arrange supply alongside compatible new microscopes — our specialists in Emmerich can advise on integration and order processing. Technical data Article number: AE.5168-NZ SKU: AE.5168-NZ Brand: Euromex Product type: Microscope stage Facts Max. temperature: 50 °C Temperature control: PID regulator Intended for: Stereo microscopes Special features Supplied only with new microscopes Integrated design for direct installation Compact heated stage for stable imaging FAQ Is this stage compatible with older microscopes? The AE.5168-NZ stage is supplied only with new microscopes and is not offered as a separate retrofit for older instruments. What temperature control does the stage provide? The AE.5168-NZ includes a PID-controlled heater with a maximum temperature of 50 °C for precise thermal regulation. How does the PID controller improve imaging results? Using the PID regulator, the AE.5168-NZ maintains set temperatures with minimal overshoot and rapid stabilisation, reducing thermal drift and improving repeatability in measurements and inspections. For which microscope types is the stage intended? The stage is designed specifically for stereo microscopes and is supplied as part of new stereo microscope assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a modular lighting concept, high‑intensity ring illumination and flexible gooseneck spotlights for consistent sample visualisation in routine inspection or documentation; order the unit directly via Metav Werkzeuge or consult their specialists for configuration advice. Modular Illumination Station LE.5212-420 — Microscope lighting station with 60‑LED ringlight and flexible gooseneck arms (Euromex) The Modular Illumination Station LE.5212-420 is an adaptable cold‑light solution for microscopy and workstation inspection, suitable for standalone use or for mounting on microscope columns. Modular mounting up to Ø44 mm 60‑LED ringlight, 24,000 lx, 6,500 K Two 56 cm gooseneck spotlights (420 nm) Adapter rings 35 mm and 25 mm Precise, high‑contrast illumination for reliable inspection The modular design provides concentrated, adjustable light where it is needed, making visual inspection and photographic documentation more reliable. The central LED ringlight delivers 24,000 lx at 6,500 K using 60 LEDs, producing even, shadow‑free top illumination that improves contrast on textured or reflective samples. For thin or translucent specimens, the dedicated transmitted light module offers 8,000 lx from 42 LEDs and a solid light plate (Ø 94.5 mm, 15 mm thick) to ensure uniform backlighting. These specifications help standardise workflow outcomes and reduce rework caused by poor visibility. Flexible positioning and secure mounting for varied workflows Flexible gooseneck arms (56 cm) with a focusing head containing three lenses enable targeted accent lighting and easy focusing on small details. The station can be used independently or attached to microscope posts up to Ø 44 mm, while the ringlight accepts a mounting diameter of 21–61 mm; adapter rings (35 mm and 25 mm) expand compatibility with a wide range of objectives and camera adapters. This combination of reach and secure attachment reduces setup time and supports consistent repeatability in production, inspection and laboratory environments. Modular accessories and simple adaptation to applications The unit’s modular architecture allows the exchange of light arms and the addition of a screw‑on polarisation filter, increasing control over glare and reflections on shiny surfaces. Interchangeable accessories (LE.5260–LE.5264) extend functionality without requiring a complete replacement, supporting a long service life and predictable upgrade paths. As a compact lighting station, it supports diverse tasks from routine quality checks to documentation, while maintaining an ergonomic footprint on the workbench. Contact Metav Werkzeuge for tailored configuration advice and rapid supply of the LE.5212-420 from Emmerich’s central quality hub Technical Data Article number: LE.5212-420 SKU: LE.5212-420 Brand: Euromex Product type: Microscope lighting station Core technical data 2 x 3 W gooseneck illumination, 420 nm 4 W LED ringlight 2 W LED transmitted light Ringlight: 60 LEDs, 6,500 K, 24,000 lx, mounting Ø 21–61 mm Transmitted light: 42 LEDs, 6,500 K, 8,000 lx; light plate Ø 94.5 mm, 15 mm thick Gooseneck arms: 56 cm; focusing head with three lenses Mounting: for microscope posts up to Ø 44 mm; adapter rings 35 mm, 25 mm Special features Modular design for standalone use or column mounting Interchangeable light arms and screw‑on polarisation filter (LE.5260–LE.5264) Adapter rings for expanded compatibility Suited to inspection, documentation and sample preparation FAQ What mounting options are available for the station? The LE.5212-420 supports standalone use or mounting on microscope posts up to Ø 44 mm and accepts a ringlight mounting diameter of 21–61 mm; adapter rings 35 mm and 25 mm are included. What are the light intensity and colour temperature of the ringlight? The Euromex ringlight provides 24,000 lx at a colour temperature of 6,500 K using 60 LEDs for balanced, daylight‑neutral illumination. Can polarisation be added to reduce reflections? Yes — the modular design accepts a screw‑on polarisation filter and interchangeable light arms; compatible accessories include LE.5260 to LE.5264. Is the station suitable for transmitted‑light applications? The unit includes a transmitted light module with 42 LEDs, 6,500 K and approximately 8,000 lx, plus a robust light plate (Ø 94.5 mm, 15 mm thick) for uniform backlighting. Are the gooseneck arms adjustable for precise positioning? The gooseneck arms measure 56 cm and feature a focusing head with three lenses, allowing targeted, stable positioning for close‑up work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the modular design and high‑output LED illumination to ensure consistent, daylight‑balanced lighting for inspection tasks; the combination of adjustable goose‑neck arms, a powerful 60‑LED ringlight and a dedicated transmitted light plate supports both surface and translucent samples. Order directly via Metav Werkzeuge or consult our technical advisers for mounting options and accessory selection. Modular Illumination Station LE.5212 — Modular microscope lighting with goose‑neck arms and 60‑LED ringlight (Euromex) A Modular Illumination Station LE.5212 designed for standalone use or secure mounting on microscope columns up to Ø 44 mm, offering versatile illumination options for laboratory inspection, assembly and quality control. Modular mounting for microscope columns Ø 44 mm Two 56 cm goose‑neck arms with focus head 60‑LED ringlight: 24,000 lx at 6,500 K Transmitted light plate Ø 94.5 mm, 8,000 lx Consistent, daylight‑balanced illumination for reliable inspection The lighting module delivers a balanced 6500 K white light spectrum, chosen to approximate daylight and improve colour rendition during visual inspection and imaging. With a 60‑LED ringlight producing up to 24,000 lx, reflected details become clearer and contrasts are enhanced, reducing the need for repeated adjustments. The station is therefore suited to tasks where colour accuracy and repeatability matter, such as electronics inspection, materials analysis or precision assembly. The integrated transmitted light option, rated at 8,000 lx, supports examination of semi‑transparent specimens and thin sections, offering a versatile lighting setup in one compact unit. Flexible positioning and precise beam control for ergonomic workflows Two flexible goose‑neck arms of 56 cm length combine reach with stability, allowing the light heads to be positioned precisely without tools. The focus head with three lenses enables targeted control of beam sharpness and spot size, which helps to isolate critical areas without creating distracting glare on surrounding surfaces. This ergonomic flexibility reduces operator fatigue and shortens setup time, making the unit valuable for repetitive inspection cycles or workstation sharing where quick reconfiguration is required. Modular mounting and straightforward integration into existing equipment Designed for mounting on microscope columns with a maximum diameter of Ø 44 mm, the station includes adapter rings (35 mm and 25 mm) for compatibility with a broad range of stands. The option to use the system either standalone or fixed to a post means it integrates neatly into both bench‑top and column‑based setups. For facilities aiming to centralise equipment without replacing existing microscopes, this modular approach minimises downtime and supports incremental upgrades while preserving previous investments. Expandable accessories for reflection control and enhanced contrast Optional accessories (LE.5260–LE.5264) include interchangeable light arms and screw‑on polarisation filters, giving control over reflections and surface glare where needed. The ringlight’s mounting diameter range of 21–61 mm supports a variety of objective and camera housings, while the robust light plate (Ø 94.5 mm, 15 mm thick) provides an even base for transmitted illumination. These options make the lighting module future‑proof for evolving inspection requirements and allow optimisation for specific materials or surface finishes. For tailored advice on mounting the Euromex LE.5212 and compatible accessories, contact Metav Werkzeuge for direct supply and technical support from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: LE.5212 SKU: LE.5212 Brand: Euromex Product type: Microscope illumination station Core specifications Goose‑neck lighting: 2 × 3 W, white light 6500 K Ringlight: 4 W, 60 LEDs, 6500 K, 24,000 lx Transmitted light: 2 W, 42 LEDs, 6500 K, 8,000 lx Ringlight mounting diameter: 21–61 mm Light plate: Ø 94.5 mm, 15 mm thick Goose‑neck arm length: 56 cm Special features Modular for standalone use or mounting on microscope columns up to Ø 44 mm Adapter rings: 35 mm and 25 mm Focus head with three lenses Accessories LE.5260–LE.5264: interchangeable arms / screw‑on polarisation filter Suitable for reflected and transmitted illumination workflows FAQ What mounting options are available for the LE.5212? The Euromex LE.5212 can be used standalone or mounted on microscope columns up to Ø 44 mm; adapter rings of 35 mm and 25 mm are included for additional compatibility. How bright is the ringlight and what colour is the light? The ringlight delivers up to 24,000 lx at a colour temperature of 6500 K, providing a cool, daylight‑balanced illumination ideal for accurate colour assessment. Can the station be adjusted for fine‑detail work? Yes, the two 56 cm goose‑neck arms and the focus head with three lenses allow precise positioning and beam focusing to highlight small features without disturbing adjacent areas. Are there options to reduce reflections on shiny samples? Interchangeable accessories (LE.5260–LE.5264) include screw‑on polarisation filters, which can significantly reduce surface reflections and improve contrast on reflective materials. Is the unit suitable for both surface inspection and thin specimens? The combination of reflected lighting (ring and goose‑necks) and a transmitted light plate (Ø 94.5 mm, 8,000 lx) supports inspection of opaque surfaces and semi‑transparent samples alike. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the sapphire-glass surface and the integrated specimen holder to improve sample stability and inspection speed; order the stage directly via Metav Werkzeuge or consult our specialists for technical clarification. DX.9504-R Microscope Stage — Sapphire glass, right-handed specimen holder by Euromex The DX.9504-R is a right-handed microscope stage with sapphire glass, a central aperture and an integrated specimen holder, designed for stable sample positioning during routine microscopy tasks. Sapphire glass stage surface Integrated specimen holder Central aperture (hole) Right-handed configuration Durable surface for long-term precision The sapphire-glass stage surface is chosen for its wear resistance and smooth finish, reducing scratches and maintaining a clear viewing plane over extended use. A hard viewing surface minimises contamination traps and simplifies cleaning routines, which supports consistent optical performance and lowers maintenance effort. The result is a reliable inspection base that preserves alignment and focus stability for longer runs, contributing to process reliability in laboratory and workshop settings. Stable sample handling to speed inspection An integrated specimen holder secures the sample in a predictable position, reducing time spent on repositioning and refocusing. The built-in aperture (hole) allows light transmission where required and keeps the sample accessible for transmitted illumination setups. These mechanical features translate into fewer interruptions in the workflow and more reproducible measurement conditions, which is particularly valuable for repetitive quality-control tasks and documentation procedures. Workflow-friendly design for routine microscopy The right-handed layout is configured for ergonomic operation in standard bench setups, enabling faster manipulation and less handling stress for right-oriented users. The stage is intended for use with microscopes and complements standard microscopy mounts, offering a compact and practical solution for laboratories and technical workshops. The Euromex construction emphasises functional simplicity and longevity, supporting dependable day-to-day inspection and sample preparation. Choose the Euromex DX.9504-R for a robust, low-maintenance microscope stage and contact Metav Werkzeuge in Emmerich for availability and expert purchasing advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DX.9504-R Manufacturer: Euromex Product type: Microscope stage SKU: DX.9504-R Data Image file size: 94419 Special features Sapphire glass surface Hole / aperture Specimen holder Right-handed orientation FAQ What is the surface material of the stage? The stage uses a sapphire glass surface, providing a hard, smooth viewing plane for long-term use with the DX.9504-R stage from Euromex. Does the stage include a hole for illumination? The stage includes a central aperture (hole) that accommodates transmitted-light arrangements and supports flexible illumination setups. Is this stage suitable for left-handed users? The DX.9504-R is configured in a right-handed layout; left-handed operation would require a differently orientated stage or a left-handed variant. How does the specimen holder affect sample stability? The integrated specimen holder secures the sample position to reduce repositioning and improve reproducibility during inspections with the microscope stage. For which equipment is this stage intended? The stage is intended for use with microscopes and serves as a replacement or upgrade stage for standard laboratory and workshop microscopy applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a sapphire-glass stage for long-lasting clarity and the integrated through‑hole and specimen holder for reliable transmitted-light work; the left‑handed layout supports specialised workflows. Order the unit directly via Metav Werkzeuge or consult our specialists for application advice. DX.9504-L Microscope Stage — Sapphire glass, left‑handed configuration (Euromex) The DX.9504-L is a left‑handed microscope stage designed for precise sample positioning, featuring a sapphire-glass surface, a central through‑hole for transmitted illumination and a secure specimen holder. Sapphire-glass stage for scratch resistance and clarity Integrated through‑hole for transmitted-light setups Specimen holder for secure sample fixation Left‑handed layout for specialised workflows Enhanced longevity and clearer imaging for routine use The use of sapphire glass on the stage delivers superior scratch resistance and a consistently smooth surface that preserves optical clarity over time. A wear‑resistant stage reduces the need for frequent replacement and minimises maintenance interruptions in laboratories and teaching environments. This durability translates into dependable image quality and lower lifetime operating costs, supporting uninterrupted inspection and documentation tasks. Reliable transmitted‑light imaging and secure sample handling An integrated through‑hole enables straightforward use with transmitted‑light microscopes, while the dedicated specimen holder keeps samples stable during adjustment and observation. Together these features simplify alignment and reduce repositioning time, increasing throughput for repetitive examinations. The left‑handed configuration adapts to specific bench layouts or operator preferences, making instrument setup more ergonomic in constrained workspaces. Versatile accessory for labs, education and inspection workflows As a compact microscope stage, the unit suits routine laboratory work, educational settings and industrial inspection where secure handling and illumination flexibility are priorities. The model DX.9504-L from Euromex integrates directly with many standard stands and optical arrangements, providing a pragmatic upgrade path for benches that require improved sample control or enhanced transmitted-light capability. For further technical details or compatibility questions, specialist advice is available to ensure the stage meets the planned application and downstream measurement needs. Choose the Euromex DX.9504-L for robust handling and precise transmitted‑light imaging — contact Metav Werkzeuge for tailored advice and supply from Emmerich. Technical data Article number: DX.9504-L SKU: DX.9504-L Manufacturer: Euromex Product type: Microscope stage Facts Gallery file size: 93995 Gallery filename: DX.9504-L.jpg Special features Sapphire glass stage Through‑hole for transmitted light Specimen holder Left‑handed configuration For microscopes FAQ What materials are used for the stage surface? The stage surface is made with sapphire glass, chosen for the DX.9504-L to provide high scratch resistance and durable optical clarity. Can the stage be used with transmitted‑light microscopes? Yes. The integrated through‑hole on the DX.9504-L accommodates transmitted‑light arrangements and facilitates even illumination for transparent samples. How does the specimen holder improve handling? The specimen holder secures samples during adjustment and observation, reducing movement and improving repeatability for inspection routines on the Euromex stage. Is the left‑handed configuration compatible with standard microscope stands? The left‑handed layout is designed to fit most standard stands while providing an ergonomic alternative for specific bench setups; compatibility checks are advised for bespoke systems. Is this stage suitable for educational and industrial use? Yes. The DX.9504-L combines durable materials and practical features that make it appropriate for both teaching environments and light industrial inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The supplied product data contains contradictory information and cannot be rendered as a reliable product description. The entry is simultaneously described as a stereomicroscope (EduBlue ED.4300, SKU ED.4300) and as an aluminium transport case for EduBlue microscopes, while the category places it under transport cases. These inconsistencies prevent accurate translation and specification: it is unclear whether the item to be presented is the microscope itself or an accessory case, and essential technical details for either object are missing or confounded. Please confirm which product is correct (stereomicroscope or transport case), supply the definitive product type and relevant technical fields, and remove any conflicting records so a full, consistent description can be produced. For clarification or to submit corrected data, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930.

Take advantage of the combination of 15x magnification, a 15 mm wide field and an integrated micrometer for faster, traceable inspection work; order directly via Metav Werkzeuge or consult the technical advisors for compatibility and application guidance. WF 15x/15 mm Eyepiece with Micrometer SB.6015-M — 15x magnification, 15 mm wide field (Euromex) The WF 15x/15 mm Eyepiece with Micrometer SB.6015-M is a wide-field microscope eyepiece with an integrated micrometer scale, designed for measurement and inspection tasks in laboratory and quality-control environments. Wide field 15 mm for larger overview 15x magnification for detailed inspection Integrated micrometer for precise measurements Precise measurement integrated into routine inspection The integrated micrometer provides a reliable, visual scale inside the eyepiece, enabling quick linear measurements during visual inspection. Combined with the 15x magnification, the scale supports measurement of small features without adding extra accessories, which reduces handling time and improves throughput. For laboratories and production inspection points, this means faster decision-making and clearer documentation of observed dimensions. Better visual context with a wide field of view A 15 mm field of view gives a noticeably broader overview compared with standard eyepieces, allowing operators to keep more of the specimen in sight while measuring. The wide-field characteristic reduces the need for repeated repositioning and minimises the risk of missing related defects. This design benefit supports efficient workflows in microscopy-based quality control and routine sample inspection. Practical integration and benefit for varied inspection tasks As a dedicated microscope eyepiece, the accessory is intended for integration into measurement routines where visual verification and simple scaling are sufficient. The combination of 15x magnification and an internal scale simplifies repeatable checks on components, PCB traces and microfabricated parts. For teams aiming to balance precision with operational speed, the eyepiece offers a compact measurement solution that complements existing optical instrumentation. For precise measurement needs or application advice regarding the SB.6015-M, contact Metav Werkzeuge for a technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930; our specialists can advise on integration and order handling. Technical data Article number: SB.6015-M SKU: SB.6015-M Brand: Euromex Product type: Microscope eyepiece Label: WF 15x/15 mm Okular mit Mikrometer SB.6015-M Core specifications Magnification: 15x Field of view: 15 mm Eyepiece designation: WF (wide field) Micrometer: integrated Features WF 15x/15 mm eyepiece with micrometer Intended for measurement and inspection Image: SB.6015-M.jpg (thumbnail available) FAQ What magnification does the eyepiece offer? The eyepiece provides 15x magnification, offering enhanced detail for inspection and measurement tasks with the integrated micrometer scale. Is the micrometer scale suitable for routine quality checks? Yes, the integrated micrometer in this eyepiece is designed for routine visual measurement and rapid verification during inspection workflows. Can the eyepiece be used for documentation of measured parts? The wide-field optic and internal scale facilitate clear visual records; measured values observed through the eyepiece can be noted and referenced for traceability in inspection protocols. Which product is this and who manufactured it? This product is the WF 15x/15 mm Eyepiece with Micrometer SB.6015-M by Euromex, specified for measurement and inspection use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of a wide-field 15x view, a 15 mm field of view and an integrated reticle for faster, more reliable measurements on inspection benches; order the eyepiece directly via Metav Werkzeuge or request advice from our consultants. WF 15x/15 mm Eyepiece with Reticle SB.6015-C — Wide-field 15x measurement eyepiece by Euromex The WF 15x/15 mm eyepiece with reticle SB.6015-C is a wide-field measuring eyepiece designed to deliver a generous field of view and a built-in crosshair for precision visual measurement in laboratory and industrial microscopy Wide-field WF 15x for expanded viewing area 15 mm field of view for reduced repositioning Integrated reticle for direct measurement Faster, more reliable measurements with wide-field optics The combination of 15x magnification and a 15 mm visual field delivers a significantly larger apparent image area than standard eyepieces, which reduces the need for constant sample repositioning and shortens inspection cycles. The wide-field design improves operator efficiency in repetitive measuring tasks by keeping more of the specimen in view; this directly translates into fewer mechanical adjustments and a more continuous workflow. The integrated reticle provides an immediate visual reference for comparison and simple alignment tasks, supporting rapid decision-making at the inspection station. Designed for precise visual metrology and calibration As a dedicated measuring eyepiece, the SB.6015-C combines optical consistency with a fixed crosshair to support straightforward calibration procedures. The reticle functions as a stable reference that can be correlated with stage micrometres or digital imaging systems during setup, enabling traceable visual measurements. For quality control applications where repeatability matters, the stable optical geometry of this eyepiece minimises measurement scatter and supports reproducible results across different operators and shifts, aiding process control and documentation. Smooth integration into inspection and documentation workflows The wide-field measuring eyepiece is suitable for use in both bench-top microscopes and inspection microscopes commonly found in workshop and production environments. Its optical characteristics facilitate quicker visual inspection and easier image capture when paired with cameras or digital documentation systems, which helps shorten reporting time. By reducing the number of manual movements required during observation, the eyepiece contributes to lower operator fatigue and fewer handling errors, improving overall throughput without sacrificing measurement integrity. Technical reassurance and purchasing guidance Metav's position as a precision partner means that the SB.6015-C arrives with an expectation of fit-for-purpose performance for industrial and laboratory use; the product is specified for metrology tasks requiring clear optics and a measurement reference. If there is uncertainty about compatibility with an existing microscope tube or a need for a detailed datasheet, technical clarifications and further specifications are available on request via Metav Werkzeuge. For additional technical information, please contact info@metav-werkzeuge.com or call +49 2822 7131930. Contact Metav Werkzeuge today to discuss how the Euromex WF 15x/15 mm eyepiece SB.6015-C can be integrated into inspection routines and to request a technical datasheet or quotation from our specialists. Technical data Article number: SB.6015-C SKU: SB.6015-C Manufacturer: Euromex Product type: Microscopy eyepiece Facts Magnification: 15x Field of view: 15 mm Special features Wide-field (WF) eyepiece Integrated reticle / crosshair FAQ What magnification and field of view does this eyepiece provide? The Euromex SB.6015-C measuring eyepiece offers 15x magnification with a 15 mm field of view, designed to increase the visible area and reduce specimen repositioning. Is the reticle suitable for calibration with a stage micrometre? Yes, the integrated reticle is intended for visual reference and can be calibrated against a stage micrometre during set-up to provide traceable measurements with the SB.6015-C eyepiece. Can this eyepiece be used for industrial inspection tasks? The wide-field optics and measurement reticle make the eyepiece suitable for industrial inspection and quality control, where quick visual checks and repeatable alignment are required. Will the eyepiece work with camera documentation systems? The optical characteristics of the WF eyepiece are compatible with many documentation setups; the SB.6015-C supports easier image capture due to its wide apparent field and stable reticle reference. How can I verify compatibility with an existing microscope tube? Check the eyepiece tube diameter and optical fit in the microscope; for assistance confirming mechanical or optical compatibility with the SB.6015-C, Metav Werkzeuge can provide guidance and detailed specifications. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of 4× magnification, numerical aperture 0.13 and a 16.5 mm working distance for reliable overview imaging and easier sample handling; order the objective directly via Metav Werkzeuge or ask our consultants for compatibility advice. Microscope objective Delphi‑X Observer DX.7304 — Euromex 4×, NA 0.13, 16.5 mm WD The Microscope objective Delphi‑X Observer DX.7304 is a 4× microscope objective designed for routine observation and overview imaging in life science and quality-control applications. 4× magnification for overview imaging 16.5 mm working distance for sample clearance Numerical aperture 0.13 for bright-field contrast Fast, reliable overview imaging with controlled resolution The 4× magnification of this objective offers a large field of view that speeds up sample scanning and reduces the number of objective changes during routine inspections. With a numerical aperture of 0.13, the lens balances resolution and depth of field, delivering clear bright-field contrast while maintaining easier focus across uneven samples. The specified working distance of 16.5 mm provides practical clearance for manipulations or larger specimen holders, so inspections and preparatory steps can be performed without constant repositioning of the sample. Optical designation and what it means for everyday use Specified as a 4×/0.13 PL‑SAFi objective in the Life Science PDF, this designation indicates a design optimised for flat-field imaging and consistent performance across the field of view. The optical correction reduces edge distortion and improves image uniformity, which is useful when documenting specimens or when using digital cameras for documentation. For laboratories and workshops that value reproducible results, the combination of a corrected field and moderate numerical aperture reduces retakes and saves time during routine workflows. Practical procurement and confidence in supply Choosing an objective with these measured parameters supports predictable imaging results in both life science and industrial microscopy contexts. Metav Werkzeuge acts as an experienced precision partner and provides transparency in supply: over 48,000 customers, a catalogue of more than 250,000 products and a warehouse in Emmerich that functions as a quality filter for the European market. For cases where additional technical data is required before purchase, Metav offers direct consultation and clear delivery pathways to ensure the objective integrates smoothly into the existing microscope setup. For compatibility checks, technical clarifications or to secure supply of the DX.7304, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss requirements and next steps. Technical Data Article number: DX.7304 SKU: DX.7304 Manufacturer: Euromex Model series: Delphi‑X Observer Product type: Microscope objective Facts Magnification: 4× Working distance: 16.5 mm Numerical aperture: 0.13 Special features 4×/0.13 PL‑SAFi objective (Life Science PDF) Specified working distance 16.5 mm Intended for microscopes (microscopy accessory) FAQ What imaging tasks is this objective best suited for? The Microscope objective Delphi‑X Observer DX.7304 (Euromex, DX.7304) is primarily intended for overview imaging, rapid sample inspection and applications where a wide field of view and practical working distance are required. How does the numerical aperture affect image quality with this objective? With a numerical aperture of 0.13, the DX.7304 provides a balance between contrast and depth of field, giving clearer bright-field images for uneven samples while keeping focus tolerance larger than high‑NA objectives. Is the working distance sufficient for manipulations or larger sample holders? The specified working distance of 16.5 mm for the DX.7304 allows additional clearance for manipulation and sample mounting, reducing the need for frequent repositioning during routine tasks. Where can further technical documentation for this objective be found? Technical specifications for the Delphi‑X Observer DX.7304 are referenced in the Life Science PDF; consult the document for the PL‑SAFi designation and exact optical parameters. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

High-contrast overview imaging at low magnification, combined with a long working distance and a modest numerical aperture, makes this objective well suited to wide-field inspection and teaching environments; the 2x magnification, 18.3 mm working distance and numerical aperture 0.05 provide a reliable balance of field of view and resolution. Order the microscope objective directly via Metav Werkzeuge or consult our technical advisors for application guidance. iScope IS.7202 microscope objective — 2x, NA 0.05 (Euromex) The iScope IS.7202 is a low-power microscope objective designed for broad-field observation and educational or routine life-science applications 2x low-power objective Working distance 18.3 mm Numerical aperture 0.05 Wide-field overview with consistent sample clearance This low-magnification lens delivers a large field of view with measured optical performance that supports rapid sample orientation and overview imaging. The combination of 2x magnification and a working distance of 18.3 mm allows examination of larger specimens or preparation holders without frequent repositioning, reducing handling time. The modest numerical aperture 0.05 is optimised for overview contrast rather than fine structural detail, which makes the optic suitable for preliminary scans, specimen locating and applications where depth of field and ease of focusing are priorities. Practical optical design and condenser recommendation Specified as a 2x/0.05 PLi objective, the optical design is intended to work with standard illumination arrangements; documentation notes it is best used together with a swing-out condenser and that the lens has no coverglass correction. In practical terms, this means the lens performs optimally when samples are presented without a coverglass or when the condenser is adjusted to accommodate thicker preparations. The absence of coverglass correction should be considered when planning workflows that routinely use mounted slides with thin covers, since correction collars or alternative objectives would be preferable in those cases. Suitable environments and handling benefits Engineered for teaching labs, routine inspection and life-science overview tasks, the objective provides a dependable option for users who need fast sample orientation and robust handling characteristics. Designed by Euromex, the lens integrates into common microscope configurations used in education and routine laboratory settings. The optical properties enable straightforward alignment and fast switching between contrast techniques when used with compatible condensers, helping to streamline workflows without sacrificing clarity during low-power observation. For reliable wide-field imaging choose the Euromex iScope IS.7202 and contact Metav Werkzeuge for advice and prompt supply from Emmerich to your workshop bench Technical Data Article number: IS.7202 Manufacturer: Euromex Model series: iScope Product type: microscope objective Facts Magnification: 2x Working distance: 18.3 mm Numerical aperture: 0.05 Special features 2x/0.05 PLi objective Best used with swing-out condenser (no coverglass correction) Source: Education and Life Science product documentation FAQ Is the objective corrected for coverglass thickness? The iScope IS.7202 microscope objective from Euromex is specified with no coverglass correction, so it is intended primarily for samples without a coverglass or for use with a swing-out condenser that accommodates thicker preparations. What are the optical specifications for the iScope IS.7202? This Euromex microscope objective offers 2x magnification, a numerical aperture of 0.05 and a working distance of 18.3 mm, suitable for overview imaging and sample orientation. Which condenser is recommended for optimal performance? Product documentation recommends use with a swing-out condenser; the iScope IS.7202 performs best when the condenser geometry allows for non-coverglass-corrected optics. For which applications is this objective most suitable? The iScope IS.7202 is well matched to educational settings, routine inspections and life-science overview tasks where large field of view and generous working distance are priorities. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Data error: Manufacturer information for "Euromex" is not included in the provided manufacturer list; unable to generate the required product description. Please supply a valid manufacturer entry from the given overview or provide corrected brand details to ensure accurate and comprehensive product information can be created, as the absence of this crucial data prevents the generation of a complete and reliable description that meets the necessary standards and expectations for clarity, accuracy, and usability in the intended context, highlighting the importance of including all relevant manufacturer details for successful documentation and product representation.

Take advantage of the combination of a 0.5x reduction factor and a 183 mm working distance for assured handling space and an extended field of view; order the attachment lens directly via Metav Werkzeuge or contact our consultants for technical clarification. Euromex Attachment Lens NZ.8905 – 0.5x, 183 mm working distance (not for S-type stands) The Euromex Attachment Lens NZ.8905 is an accessory designed as a 0.5x front lens for stereomicroscopes, providing an extended working distance for inspection and assembly tasks while remaining unsuitable for S-type stands. 0.5x magnification for extended field of view 183 mm working distance for large specimens Designed for stereomicroscopes, easy integration Not compatible with S-type stands More room for handling and inspection The generous 183 mm working distance creates significantly more space between the lens and the specimen than standard adapters, which benefits tasks that require tooling, probe access or component manipulation. For assembly, quality control or soldering operations, the increased clearance reduces the need for repositioning and accelerates throughput by allowing hands-on work without compromising focus. The extended working distance therefore translates directly into fewer interruptions during inspection cycles and a more efficient workflow. Broader overview with stable imaging As a 0.5x attachment lens, the accessory reduces the effective magnification to deliver a wider field of view, making it simpler to locate features and inspect larger components at once. This adapter is intended to be used in combination with existing objective optics on stereomicroscopes to achieve a balanced trade-off between detail and context: large-area inspection becomes faster while retaining sufficient image quality for preliminary assessments. The optical reduction also helps operators maintain a comfortable working posture, which supports consistent inspection results over longer shifts. Practical compatibility and mounting considerations The adapter is engineered specifically for use on stereomicroscopes and integrates with standard front-mount configurations; however, it is explicitly not suitable for S-type stands, which use a different mounting geometry. The construction emphasises simple mechanical fit and optical alignment to avoid additional calibration steps. For installations where the stand type is unclear, a verification of the microscope’s front-mount interface is recommended to ensure correct fitment and to maintain optical performance. For laboratory and workshop environments seeking more working room and a larger overview, request technical advice or place an order via Metav Werkzeuge — Metav Werkzeuge GmbH is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical Data Article number: NZ.8905 Manufacturer: Euromex SKU: NZ.8905 Product type: Microscope attachment lens Core specifications Magnification: 0.5x Working distance: 183 mm Compatibility: for stereomicroscopes Mount restriction: not suitable for S-type stands Special features Front attachment lens, reduction 0.5x Wide field of view for overview inspections Suitable for handling and assembly tasks with increased clearance FAQ What magnification does the attachment provide? The adapter provides a 0.5x reduction, giving a wider viewing area compared with standard objective settings for the Euromex attachment lens NZ.8905. Which microscopes is this accessory suitable for? This lens is designed for use with stereomicroscopes; it attaches at the front-mount interface common to stereo heads and complements existing objectives for broader inspections. Can the NZ.8905 be used on an S-type stand? No, the NZ.8905 is not compatible with S-type stands due to differences in mounting geometry and is intended for direct front-mount use on stereomicroscope heads. How does the 183 mm working distance help in practice? A 183 mm working distance provides more room for tools and component handling, which reduces the need to reposition parts during assembly or inspection and supports safer, more efficient workflows. Is a calibration or optical realignment required after mounting this lens? The adapter is designed for straightforward mechanical integration and generally does not require additional optical realignment beyond routine focus and adjustment of the stereomicroscope’s zoom or objective settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact 185 x 145 mm working surface combined with a 50 x 50 mm X‑Y cross table to achieve repeatable, fine positional control for sample inspection; order the Euromex stage directly via Metav Werkzeuge or consult our technical team for integration advice. 185 x 145 mm object table with 50 x 50 mm X‑Y cross table for DZ series DZ.9020 — Euromex microscope stage The 185 x 145 mm object table with 50 x 50 mm X‑Y cross table for DZ series DZ.9020 is a precision stage designed to improve specimen handling and positional control for stereomicroscope workflows in inspection and laboratory environments. 185 x 145 mm working surface 50 x 50 mm X‑Y cross travel Designed for DZ‑series stereomicroscopes Stable platform for precise positioning Precise positioning for reproducible inspection results The compact work surface paired with an integrated X‑Y cross table delivers controlled, incremental movement that supports accurate sample alignment. The 50 x 50 mm X‑Y cross table refers to the travel range in the horizontal planes, enabling fine adjustments without moving the entire microscope assembly. For quality control or repetitive inspection tasks, this combination reduces setup time and increases measurement repeatability by keeping specimens within the optical field while adjustments are made. The result is a more efficient inspection sequence and fewer re‑setups between samples. Designed for stereomicroscope workflows and easy integration Engineered for use with DZ‑series stereomicroscopes, the stage offers a stable platform that integrates with typical bench setups and inspection benches. Compatibility with the DZ range simplifies selection and reduces the need for adaptors, while the 185 x 145 mm surface provides enough area for common sample holders and fixturing. The construction supports everyday laboratory routines and small production lines where reliable positioning matters; technicians benefit from straightforward alignment and quicker transition from coarse to fine adjustments. Practical handling reduces downtime and improves throughput The stage is built to be straightforward in use: the cross table mechanism allows incremental movement without disturbing the specimen orientation. This practical design shortens manipulation cycles during sorting, assembly checks, or educational demonstrations. For users new to mechanical stages, the term X‑Y cross table simply indicates independent horizontal axes for left‑right and forward‑back movement, permitting controlled navigation across the specimen. The compact footprint helps save bench space while maintaining the precision required for detailed visual inspection. Contact Metav Werkzeuge for ordering, compatibility checks and accessory recommendations for the Euromex DZ.9020 — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: DZ.9020 SKU: DZ.9020 Product type: microscope stage Manufacturer: Euromex Label: 185 x 145 mm Objekttisch mit 50 x 50 mm X-Y-Kreuztisch für DZ-Serie DZ.9020 Facts Working surface: 185 x 145 mm X‑Y travel: 50 x 50 mm Special features Compatibility: for DZ‑series stereomicroscopes Application: specimen positioning and inspection Compact footprint suitable for inspection benches FAQ What are the exact dimensions and travel range of the stage? The Euromex DZ.9020 offers a 185 x 145 mm working surface with an X‑Y travel of 50 x 50 mm, providing controlled horizontal movement for specimen alignment. Is the stage compatible with other stereomicroscopes? The stage is designed for the DZ‑series stereomicroscopes; compatibility with other models depends on mounting arrangements — the DZ.9020 is optimised for DZ‑series integration. How does the X‑Y cross table improve inspection workflows? An integrated X‑Y cross table enables precise lateral and longitudinal adjustments without relocating the microscope, improving repeatability and reducing handling time during inspections with the DZ.9020. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The combination of 10x magnification and an18 mm field number delivers consistent measuring capability with a broad viewing area, reducing the need for repeated stage adjustments and speeding up inspection tasks. Benefit from straightforward integration into measuring workflows and order via Metav Werkzeuge or request expert advice from our consultants. EcoBlue EC.6110 — 10x measuring eyepiece, 18 mm field number (Euromex) An EcoBlue EC.6110 measuring eyepiece designed for precise stage measurement and image calibration in laboratory and educational microscopes. 10x wide-field magnification 18 mm field number for broad view Integrated micrometer 10/100 Part of the EcoBlue series Precision optics for measurable results The 10x wide-field design combined with an 18 mm field number provides a clear, steady image that supports accurate measurement. A larger field number means more of the specimen is visible without moving the slide, which improves throughput in repetitive inspection tasks. The eyepiece’s optical layout reduces eye strain during prolonged use and supports consistent readings from optical measurement scales. This results in a measurable improvement in workflow efficiency for routine calibration and documentation tasks. Direct measurement capability to simplify workflows Equipped as a WF 10x/18 mm eyepiece with micrometer 10/100, the ocular allows direct visual measurement inside the eyepiece, removing one step from traditional measurement routines. The in‑eyepiece micrometer offers immediate length references that are easy to interpret alongside the microscope image, so inspections and quick dimensional checks become faster and less error‑prone. This feature is particularly useful in training environments and production quality control where speed and repeatability are priorities. Reliable build and series compatibility for everyday use As a member of the EcoBlue series from Euromex, the eyepiece is intended for dependable, everyday performance rather than experimental or bespoke applications. The compact design makes it simple to fit into standard eyepiece tubes used across many microscopes, while the measuring function turns a standard ocular into a practical inspection tool. The emphasis here is on reliable repeatability and straightforward operation, which supports technicians and educators who require trustworthy optical measuring aids without complex setup. For precise measuring tasks with the EcoBlue EC.6110, contact Metav Werkzeuge GmbH in Emmerich for tailored advice and fast supply – info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: EC.6110 SKU: EC.6110 Manufacturer: Euromex Model series: EcoBlue Product type: Measuring eyepiece (microscope eyepiece) Facts Magnification: 10x Field number: 18 mm Micrometer: 10/100 Special features Wide-field optics Measuring eyepiece design Part of EcoBlue series FAQ What magnification and field of view does this eyepiece provide? The eyepiece delivers 10x magnification with an 18 mm field number, giving a broad visible area for inspection and measurement tasks. Does the eyepiece include a micrometer for direct measurements? Yes, the WF 10x/18 mm eyepiece is supplied with a micrometer 10/100, enabling direct measurement inside the ocular for quicker checks and documentation. Which applications suit this measuring eyepiece best? The measuring eyepiece is suited to routine laboratory and educational microscopy where quick, repeatable dimensional checks are required; the EC.6110 from Euromex is designed for such everyday measurement tasks. Is the eyepiece part of a larger product family? The EC.6110 belongs to the EcoBlue series, which focuses on practical, reliable optics for regular use rather than specialist custom optics. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The compact C‑mount interface and 1x magnification ensure seamless digital imaging in existing Oxion setups; robust construction supports reliable integration in routine inspection workflows. Order via Metav Werkzeuge or contact the consultants for tailored advice. C-mount 1x Photo Adapter for Oxion (Revision 2) OX.9810 — Euromex C‑mount camera adapter with 1x magnification A C-mount 1x Photo Adapter for Oxion (Revision 2) that adapts Oxion microscopes to a standard C‑mount camera connection for straightforward imaging and documentation in laboratory and workshop environments. Standard C‑mount interface 1x magnification for faithful reproduction Compatible with Oxion Revision 2 systems Compact, lightweight camera adapter Precision integration for inspection workflows The C‑mount interface provides a standardised mechanical and optical connection that simplifies camera attachment and alignment. With 1x magnification, the adapter transmits the microscope image to the camera without additional scaling, which preserves the native field of view for measurement, documentation or quality assurance tasks. This results in consistent image reproduction across inspections and reduces the need for corrective image processing. The accessory is engineered for straightforward mechanical fitment with the Oxion Revision 2 series, enabling fast setup in busy metrology and microscopy workflows while maintaining reliable optical coupling. Practical compatibility and straightforward installation Designed as a dedicated camera adapter, the component matches the Oxion optical path and secures a repeatable connection between microscope and camera. The revision-specific design ensures mechanical alignment and optical registration with the instrument’s image plane. Installation requires only standard mounting of a C‑mount camera to the adapter and seating the assembly into the Oxion camera port, which keeps downtime low and integration effort minimal. Where further clarification is required, technical assistance is available; Metav Werkzeuge can provide specifications and integration advice by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Why this adapter suits workshop and laboratory environments For industrial inspection, research or documentation, reliable camera coupling is essential. This Euromex adapter delivers a compact solution that reduces mechanical play and secures stable alignment during repeated use. The 1x configuration preserves the microscope’s native imaging characteristics, which is especially useful when measurements or calibrated imaging are required. Being a purpose-built accessory for Oxion Revision 2, the adapter contributes to predictable results and repeatable imaging, supporting efficient routines in production control and research labs alike while minimising setup complexity. Contact Metav Werkzeuge today to arrange procurement of the Euromex OX.9810 C‑mount 1x photo adapter and receive personalised integration support from the Emmerich team. Technical Data Article number: OX.9810 SKU: OX.9810 Manufacturer: Euromex Product type: Microscope camera adapter Data Magnification: 1x Special features C‑mount interface Compatible with Oxion (Revision 2) Photoadapter for camera attachment Gallery image available (OX.9810.jpg) FAQ Is this adapter compatible with Oxion Revision 2 microscopes? Yes. The C‑mount 1x Photo Adapter for Oxion (Revision 2) OX.9810 is specifically designed for mechanical and optical compatibility with Oxion Revision 2 systems. What magnification does the adapter provide to the camera? The accessory provides 1x magnification, transferring the microscope image to the camera without additional optical enlargement. Can the adapter be used with any C‑mount camera? The adapter uses a standard C‑mount thread, so it is suitable for cameras that accept a C‑mount connection; sensor size and camera settings should be verified for the intended imaging task. Will the adapter affect measurement accuracy when used for metrology? When mounted correctly, the 1x adapter preserves the native field of view and geometry of the microscope optics, supporting repeatable imaging suitable for documentation and measurement procedures. Where can additional technical data or installation guidance be obtained? Further specification details and installation guidance can be requested from Metav Werkzeuge; reference the Euromex OX.9810 for a prompt response. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the C-ring design and 1x magnification for reliable, true-to-scale image capture; the secure coupling and standard C-mount compatibility ensure fast integration into inspection and documentation workflows. Order via Metav Werkzeuge or consult our specialists for system pairing and compatibility advice. C-Ring-Adapter with 1x Objective DZ.9013 — Euromex microscope camera adapter The C-Ring-Adapter with 1x Objective DZ.9013 is a precision microscope camera adapter intended to couple C-mount cameras to microscopes for faithful image reproduction and straightforward photographic documentation C-ring design for secure camera coupling 1x magnification for true-to-scale imaging Compatible with standard C-mount cameras Accurate imaging that preserves scale for documentation The 1x magnification specification provides true-to-scale imaging, which is particularly valuable where dimensional fidelity matters for documentation or metrology. By transmitting the specimen image at the same scale as the optical path, the adapter removes the need for complex in-software rescaling and simplifies downstream measurement routines. This makes the component suitable for laboratory record-keeping, quality-control photography and any application where image-based comparison to a physical standard is required. The clear technical specification supports predictable integration into measurement workflows. Secure mechanical coupling for uninterrupted operation The C-ring construction delivers a secure physical interface between camera and microscope, reducing the risk of misalignment and image shift during handling. Mechanical stability directly reduces setup time and minimises rework caused by loose connections, supporting continuous operation on inspection benches or in teaching laboratories. Compatibility with C-mount camera bodies ensures wide device interoperability and avoids the need for bespoke adapters, increasing system flexibility and lowering the total effort for equipment setup. Simple integration into existing optical systems Designed for straightforward assembly, the adapter enables rapid connection of camera hardware to microscope tubes that accept C-ring or C-mount interfaces. The model DZ.9013 from Euromex is compact and intended for technicians who require a robust, low-complexity solution to add digital imaging to established optical rigs. Where calibration or specific camera sensors are required, the adapter functions as a passive optical interface; any final image calibration remains with the camera and software. For bespoke system matching or clarification of physical dimensions, Metav Werkzeuge can advise on compatibility and camera pairing. For configuration support or to discuss camera compatibility, contact Metav Werkzeuge – call +49 2822 7131930 or email info@metav-werkzeuge.com to request advice on the DZ.9013 and suitable C-mount camera pairings. Technical Data Article number: DZ.9013 SKU: DZ.9013 Brand: Euromex Product type: Microscope camera adapter Facts Magnification: 1x Mount type: C-ring / C-mount Category: C-Mount (microscopy accessory) Special features C-ring adapter with 1x objective Intended for camera-to-microscope coupling Suitable for imaging and documentation workflows FAQ Is this adapter compatible with standard C-mount cameras? Yes. The adapter is designed as a C-ring solution and is compatible with standard C-mount camera bodies for straightforward coupling to microscopes. What does 1x magnification mean for imaging and measurement? A 1x specification indicates true-to-scale imaging through the adapter when used within the microscope optical path, helping to preserve spatial accuracy for documentation and measurement tasks. Can the adapter be used for laboratory documentation and quality control imaging? Yes. The DZ.9013 supports image capture workflows where scale fidelity and a stable camera mount are required, making it suitable for laboratory documentation and inspection photography. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of high magnification, a wide 0.90 numerical aperture, and a short 2 mm working distance for detailed, high‑resolution imaging; order this objective via Metav Werkzeuge or consult our specialists for compatibility advice. Plan PLMi 100x/0.90 IOS Objective IS.8100 — Infinity‑corrected 100×, 2 mm working distance by Euromex The Plan PLMi 100x/0.90 IOS Objective IS.8100 is an infinity‑corrected microscope objective designed for demanding high‑magnification applications that require a flat field and precise optical performance with a 2 mm working distance. 100× magnification and high NA Infinity‑corrected optics for modern microscopes Short 2 mm working distance for fine detail Exceptional resolution where it matters The objective delivers 100× magnification combined with a 0.90 numerical aperture, which together enable high resolving power that brings sub‑micrometre structures into clear view. The Plan design ensures a flat field across the image, reducing edge curvature and simplifying image stitching or digital analysis. These optical properties translate into reliable image quality for inspections, documentation and research tasks where fine detail is critical. Designed optics explained for practical use This lens is infinity‑corrected, meaning the objective projects parallel light to a tube lens in the microscope stand; the result is modular compatibility with modern microscope systems and stable aberration control. The specification no cover glass correction indicates the objective is not optimised for a fixed cover slip thickness—this affects how the lens is employed in sample preparation and may require adjustment of mounting technique. The short 2 mm working distance permits close approach to the specimen, improving numerical aperture utilisation but necessitating careful handling during sample loading. Integration, traceability and application fit As a microscope accessory classified under microscope objectives, the part is supplied under SKU IS.8100 by Euromex, offering consistent manufacturing and labelling for inventory control. The combination of Plan correction and strong numerical aperture makes this objective appropriate for high‑detail tasks such as material surface inspection, fine biological imaging and micro‑fabrication quality checks. For installations where tube‑lens focal length or condenser configuration must be verified, technical consultation is recommended to ensure optical alignment and to avoid unexpected aberrations. Contact Metav Werkzeuge for tailored advice on integrating the Euromex IS.8100 into existing microscopes and to confirm compatibility with specific tube‑lens systems — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: IS.8100 SKU: IS.8100 Product type: Microscope objective Manufacturer: Euromex Data Magnification: 100× Numerical aperture: 0.90 Working distance: 2 mm Special features Infinity‑corrected optics No cover glass correction Plan PLMi design Category: For microscopes FAQ What magnification and numerical aperture does this objective provide? The objective offers 100× magnification with a 0.90 numerical aperture, delivering high resolving power for fine structural detail. Is this objective corrected for a cover glass? No — the specification states no cover glass correction, so optimal results require consideration of sample mounting and cover slip usage. What does infinity‑corrected mean for system setup? Infinity‑corrected optics require a compatible tube lens in the microscope stand; the Plan PLMi 100x/0.90 IOS Objective IS.8100 is designed to work with such systems for modular optical correction. Can this objective be used for material inspection as well as biological samples? Yes — the high numerical aperture and Plan correction suit applications in both materials inspection and fine biological imaging where high resolution and a flat field are needed. Which SKU should be ordered for inventory and procurement? The order reference is IS.8100, listed under Euromex microscope objectives. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the 2.0× magnification and compact attachment design to extend inspection capability on existing stereo optics; suited for rapid visual checks in production and quality assurance. Order the accessory via Metav Werkzeuge or consult our specialists for fit verification and application advice. 2.0× attachment lens NZ.8920 – Euromex stereomicroscope accessory with 2.0× magnification, not suitable for S-type stands A 2.0× attachment lens NZ.8920 for stereomicroscopes that doubles system magnification for closer inspection tasks while remaining a compact, easy-to-fit optical accessory. 2.0× magnification boost for stereomicroscopes Designed as a compact attachment lens Not compatible with S-type stands Euromex quality, SKU NZ.8920 Double the detail for routine inspections The main benefit of the 2.0× attachment is its straightforward magnification gain: when mounted to a compatible stereo optical head, the optical system delivers a clear enlargement that supports faster identification of small features during visual inspection. This converter is designed to act as an attachment lens rather than a standalone objective, so it modifies the existing optical train to increase working magnification without altering the core microscope. For workshop and production environments this means inspections that previously required higher-power optics can often be carried out with the standard stereomicroscope plus this accessory, reducing instrument changeovers and keeping process flow smoother. The effect on field of view and working distance is the usual optical trade-off when increasing magnification; these changes should be considered when integrating the accessory into established inspection routines. Seamless fit with stereo optics and clear compatibility limits Specified for use with stereomicroscopes, the accessory fits directly to compatible optical systems and is intended for simple retrofitting where mechanical interfaces permit. The product is explicitly not suitable for S-type stands, which indicates mechanical or adapter incompatibility with that particular stand family; installations on other stand and head combinations remain possible where the mechanical mount and optical parfocality match. The manufacturer Euromex provides the item under SKU NZ.8920, enabling clear identification for procurement and spare-part tracking. Selecting the correct converter ensures the optical geometry remains predictable and the ergonomic setup at the bench is preserved. Practical optical behaviour and workshop handling As an attachment lens, the unit doubles the nominal magnification of the parent objective, yielding a more detailed image for tasks such as component inspection, solder-joint checks or fine assembly control. Doubling magnification will typically reduce the apparent field of view and shorten the working distance compared with lower magnification settings; these are standard optical consequences and should be balanced against inspection needs. The converter’s compact format helps retain a low profile over the specimen area, which benefits tasks requiring close manual access. The simple mechanical character of the accessory minimises service complexity — maintenance is limited to keeping the optics clean and protected from dust and handling marks to ensure consistent image quality. Why this accessory suits laboratory and production benches For laboratories, QA benches and light-production workstations that rely on stereo optics, an attachment lens such as this provides a cost-effective path to extend capability without replacing main objectives or entire microscope assemblies. The Euromex NZ.8920 is aimed at users who need repeatable visual magnification enhancement and prefer a compact, quickly deployable option. When combined with a clear procurement and supply chain partner, upgrades to inspection capability are straightforward and auditable. Metav Werkzeuge’s role as distributor supports reliable availability and traceability for industrial customers seeking to standardise tools across multiple benches or sites. For a precise inspection upgrade, request the Euromex 2.0× attachment lens NZ.8920 through Metav Werkzeuge — our specialists at Metav Werkzeuge can advise on mechanical fit and application; contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised guidance Technical data Article number: NZ.8920 SKU: NZ.8920 Manufacturer: Euromex Core specifications Magnification: 2.0× Features and suitability Product type: microscope attachment lens Suitable for: stereomicroscopes Not suitable for: S-type stands Gallery image available: NZ.8920.jpg FAQ What magnification effect does this attachment produce? The Euromex 2.0× attachment lens NZ.8920 doubles the system magnification when fitted to a compatible stereomicroscope, providing closer visual inspection of small details. Will the accessory fit every stereomicroscope? Compatibility depends on the mechanical mount and optical interface of the stereomicroscope; the NZ.8920 is designed for stereomicroscopes but is explicitly not suitable for S-type stands. Does the attachment change working distance or field of view? Yes, as a converter the NZ.8920 increases magnification and will typically reduce the apparent field of view and shorten working distance compared with lower magnification settings. Is this accessory suitable for precision assembly tasks? The Euromex 2.0× attachment lens NZ.8920 is appropriate for visual inspection and fine assembly checks where higher magnification is required and mechanical access remains feasible. How is the accessory identified for procurement? The product is supplied by Euromex under SKU NZ.8920 and can be ordered through standard procurement channels such as Metav Werkzeuge Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Data conflict: the product is listed both as a "microscope cleaning agent" and as a "microscope maintenance and service kit (16-piece set)"; please verify the product information to ensure accuracy, as this discrepancy might lead to confusion for potential buyers or users who rely on precise product descriptions to make informed purchasing decisions, especially when dealing with specialised equipment like microscopes, where the distinction between a cleaning agent and a comprehensive maintenance kit could significantly impact its intended use, functionality, and overall effectiveness in maintaining the instrument's performance and longevity.

Data inconsistency: the manufacturer 'Euromex' is not included in the authorised manufacturer list; cannot generate the requested product description due to the absence of verification or approval from the relevant regulatory bodies, which ensures compliance with established standards and guidelines; this omission may lead to potential issues in product validation, quality assurance, and adherence to industry-specific requirements, thereby necessitating further investigation or corrective action to address the discrepancy and ensure that all manufacturers meet the necessary criteria for inclusion in the authorised list to maintain accuracy, reliability, and trustworthiness in the generated product descriptions and related documentation.

Benefit from high-resolution imaging and low-noise capture thanks to the combination of a 1‑inch sensor and Peltier cooling, enabling reliable documentation and analysis in laboratory and industrial settings. Order the Euromex camera directly via Metav Werkzeuge or consult our specialists for integration advice. Cooled 20 MP Microscope Camera DC.20000i — 1‑inch CMOS, Peltier-cooled, USB 3.0 by Euromex The Cooled 20 MP Microscope Camera DC.20000i is a high-resolution digital microscope camera designed for demanding laboratory and industrial imaging tasks, delivering detailed stills and controlled, low-noise acquisition for inspection, documentation and research. 20 MP resolution (5440 × 3648) 1‑inch CMOS sensor for high sensitivity Peltier cooling for low noise USB 3.0 high-speed interface Exceptional image detail for demanding inspection The camera delivers 20 MP stills at a native resolution of 5440 × 3648, driven by a 1‑inch CMOS sensor with a 2.4 µm pixel grid. This combination produces finely resolved images that reveal subtle structures and surface features, supporting precise measurements and traceable documentation. High pixel density is advantageous when cropping or performing digital measurements, since fewer optical changes are required to retain detail. The imaging chain is optimised for clarity, making the unit suitable for material analysis, quality assurance and research where visual fidelity is critical. Reliable low-noise capture for quantitative results Integrated Peltier cooling reduces thermal noise and stabilises the sensor baseline, improving the effective dynamic range to 66.3 dB and providing a signal-to-noise ratio of 41.74 dB under specified conditions. The cooled sensor benefits long exposures and high-dynamic-range tasks, where accurate tonal gradation and repeatable results matter. Reduced noise means fewer post-processing corrections and more trustworthy data for measurements or automated analysis routines, so the system supports repeatable workflows in production control and metrology. Seamless workflow integration and flexible acquisition rates The unit interfaces via USB 3.0, offering high-bandwidth connectivity for fast transfer and straightforward PC integration. Software control is provided through ImageFocus Alpha, enabling capture, annotation and basic analysis in a single environment. Native frame rates vary with resolution — from 5 fps at full resolution to 30 fps at lower resolutions — allowing users to balance throughput and detail depending on the task. The camera belongs to the CMEX i series and is supplied as a digital, cooled microscope camera well suited to automated inspection lines, educational laboratories and research benches requiring robust image handling. Contact Metav Werkzeuge for tailored advice on integrating the Euromex DC.20000i into existing microscope setups or to arrange a technical consultation from our Emmerich hub Technical data Article number: DC.20000i SKU: DC.20000i Manufacturer: Euromex Model series: CMEX i Product type: Cooled microscope camera Core specifications Resolution: 20 MP (5440 × 3648 pixels) Sensor: CMOS 1 inch Pixel size: 2.4 × 2.4 µm Dynamic range: 66.3 dB Signal-to-noise ratio: 41.74 dB Sensitivity: 462 mV at 1/30 s Frame rates: 5 fps at 5440 × 3648; 10 fps at 4096 × 2160; 15 fps at 2736 × 1824; 30 fps at 1824 × 1216 Features & compatibility Peltier cooling Software: ImageFocus Alpha Interface: USB 3.0 Digital camera, USB 3.0 compatible Label: Cooled 20‑MP‑Microscope Camera DC.20000i Gallery image available (thumbnail and file provided) FAQ What resolution does the camera provide and how does it benefit inspection tasks? The Euromex DC.20000i provides 20 MP stills at 5440 × 3648 pixels, enabling fine detail capture that reduces the need for optical changes and supports accurate measurements during inspection and documentation. Can the camera handle long exposures for fluorescence or low-light imaging? Yes, the Peltier-cooled sensor in the DC.20000i lowers thermal noise, improving dynamic range and enabling longer exposures with better signal integrity for low-light applications. Which software is supplied for controlling the camera? ImageFocus Alpha is provided for acquisition and basic analysis; it supports the typical control functions required when operating the Euromex cooled microscope camera (SKU DC.20000i) via USB 3.0. What frame rates can be expected for live observation? Frame rates depend on resolution: the camera reaches 5 fps at full 20 MP, and up to 30 fps at lower resolutions, offering flexibility between detail and live throughput. Is the interface compatible with modern laboratory PCs? The unit uses USB 3.0, ensuring high-speed data transfer and broad compatibility with current laboratory and industrial PCs that include USB 3.0 ports. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from the combination of 20x magnification, a numerical aperture of 0.50 and a compact working distance of 2.1 mm to achieve sharper, higher‑contrast imaging in routine life‑science tasks; order the objective directly via Metav Werkzeuge or consult their specialists for application support. Microscope objective Delphi‑X Observer DX.7320 — 20x, NA 0.50 (Euromex) The Microscope objective Delphi‑X Observer DX.7320 is a 20x objective intended for life‑science microscopy, delivering strong light collection and close‑in sample access for detailed observation. 20x magnification for detailed observation Numerical aperture 0.50 for improved resolution Working distance 2.1 mm for close sample access Better image detail through optical performance The optical specification centres on a numerical aperture of NA 0.50, paired with 20x magnification, which together increase the lens system's ability to resolve fine structure and to collect light efficiently. In practical terms, a higher numerical aperture means improved resolution and better contrast for weakly stained or low‑contrast preparations. The stated optical values are taken from the manufacturer documentation and offer a verifiable basis for selecting an objective when precision imaging and reproducible results are required in routine laboratory environments. Compact working distance for life‑science samples A working distance of 2.1 mm enables close approach to thin specimens and coverslip‑mounted samples, making the objective suitable for detailed examinations where instrument geometry demands compact clearance. The PL‑SAFi optical designation, as referenced in the manufacturer PDF, indicates an optical configuration intended to reduce field curvature and to support consistent image flatness across the field of view. This configuration benefits common laboratory workflows by reducing the need for repeated refocusing during tiled or extended examinations while maintaining high image fidelity. Integration and practical notes for laboratory use Specified for use with standard microscope setups, the Euromex Delphi‑X Observer series item DX.7320 integrates the described optical performance into routine microscopy tasks. The microscope objective is listed under accessories for microscopes and is intended for life‑science applications as referenced in the source documentation. For handling, routine optical care is advised: dust removal with appropriate lens tissue and cleaning solutions designed for optical coatings. The combination of 20x, NA 0.50 and 2.1 mm working distance yields a balance between magnification, light collection and sample accessibility that supports reproducible imaging in many analytical and observational laboratory scenarios. Contact Metav Werkzeuge in Emmerich to discuss specification, compatibility and availability of the Euromex Delphi‑X Observer DX.7320—phone +49 2822 7131930 or email info@metav-werkzeuge.com for tailored technical advice Technical data Article number: DX.7320 SKU: DX.7320 Model series: Delphi‑X Observer Product type: Microscope objective Brand: Euromex Facts Magnification: 20x Numerical aperture: 0.50 Working distance: 2.1 mm Special features PL‑SAFi optical design (manufacturer PDF specification) For microscopes (category: For microscopes) Source: Life Science PDF, pages 26, 49 FAQ What is the numerical aperture and why does it matter? The numerical aperture NA 0.50 determines light‑gathering power and resolution; the Euromex Delphi‑X Observer DX.7320 uses this aperture to improve detail and contrast in typical life‑science imaging. Is this objective suitable for coverslip‑mounted samples? Yes; the 2.1 mm working distance of the DX.7320 is compatible with many coverslip‑mounted preparations, allowing close approach while maintaining the stated optical performance. Which microscopes is the objective compatible with? The item is listed under accessories for microscopes and is designed to integrate into standard objective mounts; specific mechanical compatibility should be verified against the microscope's nosepiece specifications prior to purchase for the Euromex DX.7320. How should the lens be maintained to preserve image quality? Cleaning with approved lens tissue and optical cleaning fluid is recommended; avoid abrasive materials and excessive mechanical contact to maintain the coating and optical surfaces of the DX.7320. Where do the technical specifications come from? Manufacturer documentation (Life Science PDF) provides the specifications for the Delphi‑X Observer series; the listed values for 20x, NA 0.50 and working distance 2.1 mm are quoted from that source. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com