Take advantage of a compact optical design that combines 20x magnification with a numerical aperture of 0.40 for improved detail, and a short working distance of 3.5 mm that suits close-specimen inspection; order directly via Metav Werkzeuge or consult preferred advisors for integration into teaching or laboratory setups. microscope objective iScope IS.7120 — 20x, NA 0.40 (Euromex) A microscope objective iScope IS.7120 designed to deliver reliable mid-range magnification performance for educational and life‑science applications, optimised for routine imaging and close-up sample work. 20x magnification, mid-range optical power Numerical aperture 0.40 for fine resolution 3.5 mm working distance for close specimens Mid-range magnification that improves routine image clarity The 20x specification positions this optical element between low- and high-power objectives, making it a versatile choice for both classroom demonstrations and laboratory tasks. With a numerical aperture of 0.40, the lens collects a substantial amount of light, which directly enhances resolution and contrast; this means finer structural details become distinguishable without requiring higher magnifications. In practical terms, the combination of magnification and NA produces crisp, informative images suitable for documentation and comparative observation, while keeping illumination demands moderate. Short working distance for detailed specimen inspection A working distance of 3.5 mm indicates that the objective is intended for observations where the specimen or cover glass is close to the lens. This compact focal geometry supports high-detail inspections such as cell morphology checks or thin-section examinations, where proximity improves optical coupling and image sharpness. Operators should be mindful of the reduced clearance when manipulating samples or slide mounts; however, the closer spacing is an advantage when maximising numerical aperture and resolving power for demanding visual tasks. Built for education and routine life‑science workflows Engineered for robust everyday use, this optical component fits naturally into teaching microscopes and standard laboratory stands. The balanced optical parameters make it straightforward to integrate into multi-objective turrets and standard optical tubes, providing consistent performance across sessions. For educational environments, the pairing of 20x power with a 0.40 NA offers an instructive middle ground that reveals cellular detail while remaining forgiving during handling. In research or bench‑side contexts, the same characteristics enable repeatable observations that support documentation and collaborative review. Contact Metav Werkzeuge for tailored guidance on fitting the Euromex 20x objective into existing microscopes or teaching kits; technical enquiries and procurement assistance are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: IS.7120 SKU: IS.7120 Brand: Euromex Product type: microscope objective Model series: iScope Facts Magnification: 20x Numerical aperture: 0.40 Working distance: 3.5 mm Special features 20x/0.40 EPL objective (manufacturer specification) Source references: Education PDF S.24; Life Science PDF S.16,41 Category path: Microscopy accessories → Objectives → For microscopes FAQ What magnification does this objective provide? The microscope objective iScope IS.7120 provides 20x magnification suitable for mid-range imaging tasks and routine laboratory observations. What numerical aperture and optical performance can be expected? This objective is specified with a numerical aperture of 0.40, which supports improved resolution and light gathering compared with lower‑NA lenses at the same magnification. How close can the sample be to the lens? The working distance is 3.5 mm, so specimens and cover glasses will be positioned close to the front element, improving resolving power but requiring careful slide handling. Which applications are appropriate for this objective? The design is well suited to education and life science contexts, providing a balance of magnification and resolution for classroom demonstrations, routine microscopy and bench‑level inspections. Is this objective compatible with standard microscope setups? The iScope IS.7120 is intended as a standard objective for use with compatible microscopes and turrets; confirm mechanical fitting and optical tube length with the instrument documentation before installation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise optics, compact working distance and reliable construction for consistent imaging in educational and routine laboratory settings. Order the iScope IS.7220 directly via Metav Werkzeuge or request advice from our consultants for application-specific guidance. iScope IS.7220 microscope objective — 20x magnification, NA 0.40 The iScope IS.7220 is a 20x microscope objective designed for detailed observation of prepared slides where a moderate numerical aperture and a short working distance are required. 20x magnification for detailed observations Numerical aperture 0.40 for improved resolution Working distance 5.1 mm for close-focus samples IOS PLi optical correction for flat-field imaging Precision imaging where magnification meets usability The 20x optical power combined with a numerical aperture 0.40 delivers a balanced trade-off between detail and depth of field, making this objective well suited to routine laboratory, educational and life‑science tasks. The moderate aperture improves resolution and contrast compared with lower-NA optics, while keeping illumination requirements manageable. The optical design described as IOS PLi indicates enhanced field flatness and correction across the field of view, which reduces peripheral blurring and simplifies image interpretation for frequent inspections. Compact working distance that supports fine sample handling A working distance of 5.1 mm enables focus on thin sections and coverslip-mounted preparations without excessive clearance, which benefits bench workflows that require precise stage movement or close access for micro-manipulation. The shorter working distance calls for careful specimen handling; however, it also facilitates higher numerical aperture performance in a small optical package. For routine brightfield observation and documentation of cellular detail, this combination supports efficient throughput and consistent image quality. Reliable build and clear identification for workshop procurement Manufactured by Euromex, the objective is identified by the article number IS.7220, which helps procurement and inventory control in laboratory and educational supply chains. The designation within the iScope series signals a family of compatible optics for straightforward swapping between magnifications when a microscope accepts standard objectives. Clear labelling and consistent optical specifications assist quality assurance processes and reduce the risk of mismatched components during instrument maintenance. Contact Metav Werkzeuge today for a detailed specification sheet or to discuss whether the iScope IS.7220 matches the optical requirements of the application at hand; Metav Werkzeuge can advise on mounting and integration from their Emmerich location. Technical Data Article number: IS.7220 SKU: IS.7220 Manufacturer: Euromex Model series: iScope Product type: microscope objective Numbers / Core Technical Data Magnification: 20x Numerical aperture: 0.40 Working distance: 5.1 mm Designs / Special Features IOS PLi objective Source: Education PDF S. 25; Life Science PDF S. 16, 42, 43 FAQ What magnification and resolution does this objective provide? The iScope IS.7220 offers 20x magnification with a numerical aperture of 0.40, which improves resolution and contrast for routine laboratory imaging while maintaining sufficient depth of field for general slide work. Which specimens are best viewed with this objective? Thin, coverslip-mounted preparations and standard histological sections are well suited to an objective with a 5.1 mm working distance and moderate aperture; the optical balance supports cellular and tissue-level observations. Is the optical correction suitable for imaging across the full field of view? Yes—the IOS PLi designation indicates measures to flatten the field and reduce edge aberrations, resulting in sharper detail across much of the visible area when used with appropriate tube optics. Can this objective be integrated into existing teaching microscopes? The item is part of the iScope series and is labelled clearly as IS.7220 for procurement; compatibility depends on the microscope’s objective mounting standard, so checking the instrument’s nosepiece and parfocal spacing is recommended. How does the working distance affect handling and illumination? A 5.1 mm working distance allows close focus on specimens but requires careful stage movement and positioning; illumination should be adjusted to match the 0.40 aperture for optimal contrast. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of 20x magnification, a 0.40 numerical aperture, and a compact 1.2 mm working distance for precise high‑resolution inspection in routine metrology tasks. Order the microscope objective directly via Metav Werkzeuge or consult our specialists for application advice and delivery from Emmerich. Euromex AE.5594 — 20x microscope objective, NA 0.40 The microscope objective AE.5594 is a 20x optical lens optimised for precise sample inspection and metrological imaging in laboratory and workshop environments. 20x magnification for detailed imaging Numerical aperture 0.40 for improved resolution Working distance 1.2 mm for close-up inspection Euromex quality for consistent performance High‑resolution imaging that supports reliable measurement The combination of 20x magnification and a numerical aperture of 0.40 delivers enhanced contrast and resolving power for fine structures. A larger numerical aperture gathers more light and narrows the diffraction limit, which means more detail is retained in the image; this is particularly beneficial when measuring features or assessing surface structures. The specification given in the Education PDF confirms the optical parameters (20x/0.40 SMP objective), so operators can rely on consistent imaging performance when integrating this lens into metrological workflows. Close working distance tailored for detailed inspection tasks A working distance of 1.2 mm enables very close focus on small or shallow specimens, supporting detailed observation and precise alignment during measurement. Close proximity to the sample reduces parallax and can improve measurement repeatability for flat or low‑profile parts. Care should be taken with fixturing and sample clearance because the short working distance requires controlled specimen placement; this trade‑off is common when pursuing high magnification and resolution in compact optical designs. Practical use and workshop advantages for metrology setups The objective is designed for routine use in inspection and quality control, offering a straightforward upgrade path for microscopes used in laboratories and industrial metrology stations. Euromex manufacturing standards aim to ensure mechanical consistency between objectives, which helps maintain calibration and reduces downtime. Regular cleaning with appropriate lens tissue and storage in a dry, dust‑free case will preserve optical performance and support reliable measurement results across repeated inspection cycles. Contact Metav Werkzeuge for tailored advice on integrating the Euromex AE.5594 into inspection equipment and to arrange prompt supply from Emmerich. Technical data Article number: AE.5594 SKU: AE.5594 Manufacturer: Euromex Product type: microscope objective Core technical data Magnification: 20x Working distance: 1.2 mm Numerical aperture: 0.40 Special features Designation in source: 20x/0.40 SMP objective Reference: Education PDF‑S.13 Category: For microscopes FAQ What magnification does this objective provide? The Euromex AE.5594 objective provides 20x magnification, suitable for detailed inspection and mid‑range metrology tasks. How does the numerical aperture affect measurement quality? A numerical aperture of 0.40 increases resolving power and light‑gathering capability, which helps to produce clearer images for more reliable measurements with the Euromex AE.5594. Is the short working distance a limitation for workshop use? The 1.2 mm working distance allows very close focus for fine detail; however, it requires careful specimen fixturing to avoid collisions and to ensure reproducible positioning during inspection. Can this objective be used for both laboratory and industrial inspection? Yes, the optical characteristics and Euromex build quality make the objective suitable for laboratory benches and industrial metrology stations where high‑resolution visual inspection is needed. How should the lens be maintained to preserve accuracy? Routine care such as gentle cleaning with suitable lens tissue and storing the objective in a dust‑free environment will help maintain optical clarity and ensure ongoing measurement reliability with the AE.5594. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Compact, precise microscopy is achieved with the combination of 20x magnification, a 0.40 numerical aperture and a 2.0 mm working distance for reliable intermediate-detail imaging; order the lens directly via Metav Werkzeuge or consult the technical team for compatibility and application advice. EcoBlue EC.7020 microscope objective — 20x, NA 0.40 (Euromex) EcoBlue EC.7020 microscope objective delivers 20x magnification with a short working distance, suited to routine laboratory and educational microscopy applications 20x magnification for clear intermediate detail Numerical aperture 0.40 for good resolution 2.0 mm working distance for proximate focusing Suited to educational and routine laboratory microscopy Consistent optical performance for reliable imaging The EcoBlue EC.7020 microscope objective combines 20x magnification with a 0.40 numerical aperture, a pairing that balances enlargement with light-gathering capability to deliver clear intermediate-level detail. The numerical aperture expresses the objective’s ability to resolve fine structures and influence image brightness; a 0.40 numerical aperture provides noticeably improved resolution over lower-NA objectives while maintaining adequate depth of field. This makes the lens appropriate where clarity of sub-millimetre features is important without requiring specialist high-NA condensers. Compact working distance for practical sample handling A 2.0 mm working distance allows close access to specimens, which is advantageous when observing small mounted samples or when using thin coverslips in standard laboratory preparations. The relatively short working distance reduces the optical path between sample and lens, improving image crispness for near-surface features. For users who require consistent focus at intermediate magnifications, this configuration simplifies focusing routines and supports repeatable imaging workflows in teaching and routine inspection tasks. Designed to support education and routine laboratory workflows Engineered for routine laboratory and educational environments, this objective offers a pragmatic mix of performance and ease of use. The combination of 20x magnification and 0.40 numerical aperture supports a broad range of common applications — from student practicals to basic materials inspection — without the need for specialist optics. Equipment purchasers seeking dependable, accessible optical components will find this lens a practical addition to standard microscope sets; for further specification clarifications, the Metav Werkzeuge technical advisors can provide measured data and application guidance. Purchase the Euromex EcoBlue EC.7020 via Metav Werkzeuge for dependable intermediate-magnification imaging and contact Metav Werkzeuge for detailed technical data and ordering assistance at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: EC.7020 SKU: EC.7020 Brand: Euromex Model series: EcoBlue Product type: microscope objective Facts Magnification: 20x Numerical aperture: 0.40 Working distance: 2.0 mm Special features 20x/0.40 objective WD 2.0 mm Source: Education PDF S. 9 FAQ What magnification does this objective provide? The objective provides 20x magnification; the EcoBlue EC.7020 is specified for intermediate-level enlargement in routine microscopy. How does the numerical aperture affect image quality? The 0.40 numerical aperture of this lens increases resolving power and light collection compared with lower-NA objectives, improving detail visibility for typical laboratory samples. Is the working distance suitable for coverslipped slides? With a 2.0 mm working distance, the lens allows close focus on standard preparations and thin coverslips, supporting common educational and routine laboratory tasks. Which applications fit this objective best? The lens is intended for educational use and routine laboratory microscopy where reliable intermediate magnification and clear detail are required, such as student practicals and basic material inspections. Can this objective be used with existing laboratory microscopes? Compatibility depends on the microscope’s objective turret and optical tube length; the EcoBlue EC.7020 is designed for standard educational and lab microscopes—consult technical specifications for mounting details. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Reliable 20x magnification paired with a 0.40 numerical aperture and a compact 1.20 mm working distance delivers detailed, high-contrast images for thin specimens and routine laboratory tasks. Order the BioBlue.Lab BB.8820 microscope objective directly via Metav Werkzeuge or ask our consultants if needed. BioBlue.Lab BB.8820 microscope objective — 20x, NA 0.40 by Euromex BioBlue.Lab BB.8820 is a microscope objective engineered for clear mid‑range magnification imaging in educational and life‑science settings. High 20x magnification Numerical aperture 0.40 for resolution Working distance 1.20 mm for fine focus Optimised mid‑range imaging for clear detail The BioBlue.Lab BB.8820 offers 20x power and a numerical aperture of 0.40, a combination that increases light gathering and improves image resolution and contrast compared with lower‑NA optics. The numerical aperture describes how much light the objective can collect: a higher value translates into finer detail and brighter images at the same illumination. For laboratories that require dependable intermediate magnification—for example in cell observation, histology teaching or routine inspection—this lens delivers consistent optical performance while keeping adjustments straightforward. Short working distance enables close inspection of thin samples With a 1.20 mm working distance, the objective brings the front lens close to the specimen plane, permitting high‑detail observation of thin preparations and coverslips. A reduced working distance improves optical coupling between sample and objective, which enhances effective resolution, but it also requires careful stage movement and sample handling. The compact clearance benefits applications where maximum image detail is important and sample thickness is controlled, such as mounted slides in teaching labs or routine life‑science workflows. Practical design for integration into educational and life‑science microscopes Specified as a PL objective, this lens is suitable for standard microscope setups used in education and basic research. The objective’s design supports straightforward fitting on compatible microscope nosepieces and aligns with common illumination geometries to produce balanced images under transmitted light. Euromex quality control ensures the lens meets industry expectations for reproducibility, making it a practical choice for facilities that need reliable optics across multiple users and shifting experimental routines. Improves throughput through consistent, reproducible results By combining stable magnification, sufficient numerical aperture and a controlled working distance, the objective helps reduce repeat imaging and user‑related variability. This contributes to faster analysis cycles and fewer adjustments during session handovers, which is particularly valuable in shared laboratory environments and classroom settings. The result is an objective that supports precision and dependable imaging, helping teams to maintain steady workflows and reduce time lost to re‑setups. For application advice or to check availability of the BioBlue.Lab BB.8820 microscope objective, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and delivery information. Technical data Article number: BB.8820 SKU: BB.8820 Manufacturer: Euromex Model series: BioBlue.Lab Product type: Microscope objective Facts Magnification: 20x Numerical aperture: 0.40 Working distance: 1.20 mm Special features 20x/0.40 PL objective specification Intended for microscopes (microscopy accessories) Label: Mikroskopobjektiv BioBlue.Lab BB.8820 UID: BB.8820 FAQ What magnification and aperture does this objective provide? The BioBlue.Lab BB.8820 delivers a 20x magnification with a 0.40 numerical aperture, offering a balance of magnification and light‑gathering for clear mid‑range imaging. Is the working distance sufficient for standard coverslips and slides? Yes, the 1.20 mm working distance is appropriate for thin mounted samples and standard coverslips, but it requires careful stage control to avoid contact during focusing. Which applications suit this objective best? This objective is well suited to educational microscopy and routine life‑science observations where consistent 20x imaging and good contrast are required. Can the BioBlue.Lab BB.8820 be used on any microscope brand? The objective is specified as a PL type and fits standard nosepiece mounts on many laboratory microscopes; compatibility should be confirmed against the microscope’s objective thread and turret spacing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a 20 MP sensor and adaptable frame rates for precise documentation and efficient image capture; compatibility with ImageFocus Alpha ensures smooth integration into existing workflows. Order the camera directly via Metav Werkzeuge or consult our specialists for application advice. CMEX Pro DC.20000-Pro — 20 MP microscope camera with 1/1.8” CMOS and dual-frame-rate performance (Euromex) The CMEX Pro DC.20000-Pro is a high-resolution microscope camera designed for documentation and analysis in laboratory, educational and industrial inspection settings. 20 MP sensor for detailed image capture 5120 x 3840 and 2560 x 1920 resolutions 1/1.8” CMOS sensor with 24 bits colour Up to 45 fps and long exposure range Capture fine detail for reliable documentation The camera delivers 20 MP images at up to 5120 x 3840 pixels, which supports high-detail documentation for reports, microscopy image archives and product inspection. A larger image sensor combined with a 1/1.8” CMOS architecture yields improved light collection and image fidelity compared with smaller sensors; this reduces the need for excessive post-processing and helps preserve fine structural detail. For traceable records and comparative studies, the high pixel count enables accurate cropping and measurement without rapid loss of clarity, supporting metrology-oriented visual records and routine quality checks. Flexible exposure and frame-rate control for varied workflows Adaptable capture parameters enable both rapid live observation and long-exposure imaging. The model supports frame rates up to 45 fps (depending on resolution) and an exposure range from 0.2 ms to 15000 ms, which makes it suitable for fast-moving samples as well as dim or fluorescence-lit specimens. A wide exposure range allows optimising signal capture without changing optics or illumination; shorter exposures reduce motion blur during quick inspections, while extended exposures increase sensitivity where light is limited. The result is fewer re-takes and a smoother imaging workflow in multi-user environments. Image quality and measurable performance for confident results Colour reproduction and sensor performance are engineered for reproducible outcomes: 24 bits colour depth and 12-bit greyscale conversion provide nuanced tonal gradation for accurate colour-critical applications. The camera’s signal-to-noise ratio (60 dB) and dynamic range specifications indicate robust noise performance and contrast handling in typical lab lighting. These technical parameters translate into clearer images with fewer artefacts, making the device suitable for documentation, digital archiving and comparative analysis where visual accuracy is essential. Integration with software and everyday lab practice Compatibility with ImageFocus Alpha ensures straightforward acquisition, basic processing and export workflows for labs already using that platform. Native digital output and common camera descriptors simplify connection to imaging workstations and microscopes; the camera functions well as part of a documentation chain for teaching, inspection and routine laboratory recording. For teams seeking reliable image capture without a steep learning curve, the camera’s digital interface and supported software shorten setup time and reduce downtime between experiments. Contact Metav Werkzeuge for tailored advice on integrating the Euromex CMEX Pro DC.20000-Pro into existing microscopy setups, or request a configuration suggestion from our consultants in Emmerich. Technical data Article number: DC.20000-Pro SKU: DC.20000-Pro Label: CMEX Pro DC.20000-Pro Model series: CMEX Pro Manufacturer: Euromex Product type: microscope camera Core technical data Sensor: 1/1.8” CMOS Resolution: 20 MP Pixel resolutions: 5120 x 3840; 2560 x 1920 Pixel size: 1.4 x 1.4 µm Frame rate: 20; 45 fps (dependent on resolution) Exposure: 0.2 ms – 15000 ms Colour depth: 24 bits Greyscale conversion: 12 bits Signal-to-noise ratio: 60 dB Dynamic range: 39 dB Sensitivity: 8.4 e−/lux.sec Special features Software compatibility: ImageFocus Alpha Digital camera, true colour capture Model: CMEX Pro DC.20000-Pro Labeling per manufacturer data FAQ What resolutions and frame rates does this camera support? The CMEX Pro DC.20000-Pro supports 5120 x 3840 and 2560 x 1920 pixel modes with frame rates specified as 20 fps and up to 45 fps depending on the chosen resolution. Is the camera compatible with common microscope imaging software? Yes — the camera is listed as compatible with ImageFocus Alpha, which facilitates acquisition and basic processing in routine laboratory workflows. What type of sensor and pixel size does the camera use? This model uses a 1/1.8” CMOS sensor with a pixel size of 1.4 x 1.4 µm, balancing light sensitivity and resolution for detailed imaging. Can the camera capture both colour and greyscale images? The camera delivers 24-bit colour and supports 12-bit greyscale conversion, enabling accurate colour reproduction and detailed intensity mapping for analytical tasks. Which applications are suitable for this microscope camera? Typical uses include documentation, teaching, industrial inspection and research microscopy where high-resolution imagery and flexible exposure control are required. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Compact measuring eyepiece combining 10x magnification, a 20 mm field number and integrated crosshairs for reliable alignment and faster inspection — order directly via Metav Werkzeuge or ask our consultants for application advice. iScope IS.6010-C microscope eyepiece — 10x, 20 mm FN, crosshairs (Euromex) The iScope IS.6010-C is a measuring eyepiece designed for precise visual inspection and alignment tasks in laboratory and production environments, offering 10x magnification and a 20 mm field number with an integrated reticle. 10x magnification for precise measurement 20 mm field number for wide observation Integrated crosshairs for accurate alignment Extra wide field eyepiece (EWF) for better overview Precision optics for repeatable measurements The iScope IS.6010-C is engineered as a measuring eyepiece that delivers repeatable visual measurement capability thanks to its 10x magnification and an extended 20 mm field number. The larger field number increases the visible area inside the tube, which reduces the need to reposition specimens and speeds up inspection cycles. The integrated crosshairs (reticle) provide a fixed reference for alignment and comparative checks; this is particularly useful when documenting positions or comparing features across multiple parts. For users unfamiliar with the term, the field number describes the diameter of the field of view at the eyepiece and is a direct indicator of how much of the sample can be seen without moving the stage. Practical benefits for quality control and routine inspection In production and quality control environments, the combination of an extra wide field (EWF) eyepiece with a clear reticle reduces handling time and minimises measurement error. The enlarged apparent field supports visual inspection across larger sample areas, while the crosshairs support quick positional referencing and repeat checks. These characteristics translate into improved throughput and fewer stop-starts during batch inspection. For applications that require visual alignment prior to metrological measurement or further imaging, a stable reticle reduces operator variability and supports consistent process documentation. Integration and handling in everyday workflows The eyepiece’s optical design focuses on clarity and ease of observation, delivering good contrast and a comfortable viewing experience for routine work. As a component intended for measuring tasks, care in cleaning and handling will maintain reticle visibility and optical performance; use lint-free cloths and manufacturer-recommended cleaning agents to avoid damaging coatings. Where additional documentation or calibration against stage micrometres is required, the reticle can be used as a quick reference during setup. For specialised information about compatibility with specific microscope models or to request the official datasheet referenced in product literature, Metav’s technical consultants are available to advise on integration into existing inspection systems. Discuss application suitability or request the datasheet from Metav Werkzeuge for professional guidance and supply coordination — Metav Werkzeuge is ready to assist from Emmerich with reliable delivery and expert advice. Technical data Article number: IS.6010-C Manufacturer: Euromex Model series: iScope SKU: IS.6010-C Type: microscope eyepiece Numbers / Core technical data Magnification: 10x Field number: 20 mm Designs / Special features Extra wide field (EWF) Integrated crosshairs (reticle) Category: measuring eyepieces FAQ What magnification does this eyepiece offer? The iScope IS.6010-C provides 10x magnification, suitable for detailed visual inspection and alignment tasks. What does the 20 mm field number mean for inspection? A 20 mm field number indicates a wide apparent field of view, allowing larger sample areas to be seen without stage movement and supporting faster inspections with the iScope IS.6010-C. Is there a reticle or marker fitted to the eyepiece? Yes, the eyepiece includes integrated crosshairs (reticle) to assist with accurate alignment and repeatable positional checks. For which tasks is this eyepiece most suitable? The iScope IS.6010-C is ideal for visual measurement, alignment checks and routine quality-control observations where a wide field and a fixed reference mark are advantageous. Can the eyepiece help reduce operator variability? The fixed reticle and wider field of view provided by the iScope IS.6010-C help standardise visual reference points and reduce variability between operators during inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Precise, repeatable measurements are provided by the combination of 10x magnification, a 20 mm field number and the integrated 10/100 micrometer with crosshairs; this yields faster inspections and dependable documentation. Order the Euromex bScope BS.6010-CM directly via Metav Werkzeuge or ask our consultants if needed. bScope BS.6010-CM — Measuring eyepiece with 10x magnification and 20 mm field number (Euromex) bScope BS.6010-CM is a dedicated measuring eyepiece for laboratory and educational microscopy, designed to simplify direct scale readings and inline measurements in inspection workflows 10x magnification for clear measurements 20 mm field number for wide field view Integrated 10/100 micrometer scale and crosshairs Compatible with standard microscope eyepieces Accurate measurement through the eyepiece speeds up inspection The measuring eyepiece provides a straightforward way to obtain calibrated measurements directly in the optical path. With 10x magnification and a 20 mm field number, the ocular offers a balanced view that supports both detailed observation and a generous field of vision. The 10/100 micrometer scale combined with centred crosshairs permits precise linear and positional readings without additional instrumentation. For routine tasks in education, quality control or bench-top inspection, this optical solution reduces handling steps and limits measurement uncertainty introduced by transfers between instruments. Measurable productivity gains for laboratory and teaching environments Integrating a calibrated ocular into an existing microscope saves time and improves repeatability: marked stages or components can be assessed immediately, and simple dimensional checks become part of the inspection routine. The ocular’s scale graduations (10/100) allow for both coarse and fine readings, aiding operators who require rapid pass/fail decisions as well as those performing documentation for traceability. These performance characteristics make the device particularly useful in teaching laboratories and small-scale production where efficiency and clarity of results are paramount. Practical compatibility and installation guidance for microscopes Designed as a measuring ocular, the unit is intended to be used with compatible microscopes and eyepiece tubes commonly found in educational and laboratory settings. The optical parameters—10x magnification and 20 mm field number—help assess how the ocular will match existing objectives and camera systems: a larger field number gives a wider usable image circle, which benefits sample orientation and downstream documentation. The integrated crosshairs aid in centring and alignment tasks, while the micrometer scale supports calibrated documentation. If clarification on fit or integration is required, technical advice is readily available to ensure correct adaptation into the optical chain. Contact Metav Werkzeuge today to request supply of the Euromex bScope BS.6010-CM and receive tailored advice on integrating this measuring eyepiece into existing microscope setups — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: BS.6010-CM SKU: BS.6010-CM Brand: Euromex Model series: bScope Product type: Measuring eyepiece / microscope eyepiece Specifications Magnification: 10x Field number (FN): 20 mm Scale: 10/100 micrometer graduations Optical accessory: Crosshairs included Source: Education PDF p.21; Life Science PDF p.9 Special features HWF 10x/20 mm eyepiece designation Integrated micrometer scale for direct measurements Crosshair reticle for centring and alignment Suitable for educational and laboratory microscopy FAQ What magnification does this eyepiece offer? The Euromex bScope BS.6010-CM delivers 10x magnification, allowing clear observation and accurate incremental readings. What does the 20 mm field number mean for practical use? A 20 mm field number indicates a relatively wide visible field through the measuring ocular, which improves sample overview and simplifies positioning when using the BS.6010-CM in microscopy work. Is a micrometer scale included and how fine is it? Yes, the eyepiece contains an integrated 10/100 micrometer scale together with crosshairs, enabling both coarse and fine linear measurements directly in the optical path. Can this measuring eyepiece be used in teaching laboratories? The eyepiece is well suited for teaching and instructional environments where direct, repeatable measurements and quick demonstrations are important; the BS.6010-CM supports both practical learning and routine inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a wide-field WF 20/10 design combined with an integrated reticle for dependable measurement and alignment in inspection workflows; order via Metav Werkzeuge or consult our specialists for application support. WF 20/10 mm Eyepiece with Reticle SB.6020-C — Euromex microscope eyepiece The WF 20/10 mm eyepiece with reticle SB.6020-C is a wide-field measurement ocular designed for precise visual inspection and reticle-based alignment in laboratory and workshop microscopy Wide-field WF 20/10 eyepiece design Integrated reticle for precise measurements Suitable for measurement and inspection workflows Euromex quality and industrial compatibility Precision measurement where visual control matters The wide-field WF 20/10 layout delivers an enlarged apparent field of view, so measurement tasks benefit from improved situational awareness and faster target acquisition. The integrated reticle provides a fixed reference grid for repeatable alignment and simple comparative measurement. For users with limited metrology experience, a reticle translates angular and lateral offsets into immediately readable cues, reducing iterative trial-and-error and increasing throughput in routine inspection. Fast integration into visual inspection setups Designed as a measurement ocular, the accessory is compatible with standard optical inspection chains and is intended to be used alongside common tripod-mounted and bench microscopes. The ocular format permits straightforward swapping into an eyepiece tube without adjustments to primary imaging paths, enabling process continuity in lab and production environments. This configuration supports efficiency gains in quality-control routines and minimises downtime during tool or sample changes. Robust optical choice for industrial and educational use Constructed to meet the demands of frequent use, the measurement eyepiece pairs Euromex optical experience with a practical reticle for inspection and teaching. The fixed reticle eliminates the need for additional calibration accessories for many comparative tasks, making the component a reliable choice for workshops, training rooms and small-batch production. The emphasis is on consistent visual reference rather than electronic measurement, which simplifies maintenance and long-term reliability. Practical advice for measurement and care To preserve the accuracy of the reticle reference, routine cleaning with lens-safe materials and avoidance of mechanical shock are recommended. The optical designation WF 20/10 mm indicates a wide apparent field with an incorporated measuring grid; users should allow for eyepiece parallax when combining reticle readings with photographic documentation. If clarification on application or compatibility is required, technical guidance is available to help match the ocular to existing instrumentation and inspection procedures. For reticle-based measurement and reliable inspection, request application advice or a supply proposal from Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: SB.6020-C SKU: SB.6020-C Manufacturer: Euromex Product type: microscope eyepiece Core specifications Optical designation: WF 20/10 mm Feature: integrated reticle Special features Category: Messokulare (measurement eyepieces) Image file: SB.6020-C.jpg FAQ Is this eyepiece suitable for measurement tasks in production inspection? The WF 20/10 mm eyepiece with reticle SB.6020-C is specifically designed for measurement and alignment tasks and is suitable for production inspection where visual reticle references are acceptable. Can the reticle be used with camera-based imaging? The integrated reticle in the SB.6020-C provides a visual reference; when used with camera adapters, image capture may include the reticle depending on the optical train, allowing photographic documentation with the reticle visible. Does the ocular fit standard microscope eyepiece tubes? The eyepiece is provided as a microscope ocular intended for common eyepiece tubes; compatibility with specific instruments should be confirmed against the instrument's eyepiece specifications. How should the reticle be cleaned without damaging it? Clean the ocular surfaces with lens-safe cleaning fluid and a soft microfibre cloth, avoiding solvents and abrasive materials to preserve the reticle markings in the SB.6020-C. What applications benefit most from this eyepiece? Measurement eyepieces such as the WF 20/10 mm with reticle excel in alignment, comparative measurement and inspection tasks in workshops, educational settings and light-production quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Reliable phase contrast imaging and oil‑immersion capability combine to deliver fine structural detail and consistent contrast for demanding laboratory work; the set features PLPHi infinity‑corrected objectives and dedicated phase contrast rings for both 20x and S100x, ensuring reproducible results. Order the IS.9163 directly via Metav Werkzeuge or consult our advisors for configuration support. Euromex IS.9163 – Phase contrast slider set with 20x and S100x oil‑immersion, PLPHi infinity‑corrected objectives IS.9163 is a Euromex phase contrast slider set intended for high‑resolution microscopy, combining oil‑immersion PLPHi optics with phase contrast rings suitable for 20x and S100x applications. Oil‑immersion PLPHi infinity optics Includes phase contrast rings for 20x/S100x Designed for high‑resolution phase contrast Compatible with Euromex IS.9163 setups Delivering increased detail with oil‑immersion PLPHi optics The slider set uses oil‑immersion optics to raise numerical aperture at high magnifications, which improves light gathering and therefore image resolution and contrast for transparent specimens. The PLPHi designation identifies high‑performance plan objectives corrected for flat field reproduction, while infinity‑corrected optics permit the use of intermediate optical components without compromising alignment. For laboratories seeking clearer phase contrast of cellular structures, these characteristics translate into more reliable visualisation and fewer repeat scans, supporting efficient workflows and reduced analysis time. Consistent phase contrast for reproducible imaging Included phase contrast rings are matched to the 20x and S100x objectives to produce the characteristic interference that reveals phase differences in unstained samples. Because the condenser annuli and objective phase plates are specified for the same magnifications, the set enables consistent contrast across sessions, which is particularly valuable for comparative studies and quality control. The arrangement reduces setup variability and supports standardised imaging procedures — a rational advantage for any lab that depends on comparable results day to day. Integration into microscope systems and workflow benefits The components are designed for microscopes that accept infinity‑corrected objectives, allowing the set to be incorporated into existing optical trains where such optics are supported. Compatibility with oil‑immersion technique means improved performance at high magnification, while the matched phase rings simplify switching between contrast modes. For users evaluating system integration, the set offers a practical combination of optical performance and operational efficiency, with fewer adjustments needed to achieve optimal phase contrast images. Practical considerations and expert support For clarification on specific system fit or immersion procedures, the set's design and function are documented to support correct use in laboratory environments. If uncertainty remains about compatibility with a particular microscope stand or condenser, Metav Werkzeuge provides technical advice and can arrange procurement. The emphasis on verified optical matching and the inclusion of phase rings reduce installation time and help maintain a clear, repeatable imaging routine — factors that contribute to dependable daily operation in both research and routine inspection settings. For precision phase contrast imaging, contact Metav Werkzeuge to discuss the Euromex IS.9163 configuration and procurement options — email info@metav-werkzeuge.com or call +49 2822 7131930 to obtain expert advice and secure supply from our Emmerich location. Technical Data Article number: IS.9163 SKU: IS.9163 Product type: Phase contrast set Manufacturer: Euromex Data Magnifications: 20x, S100x oil‑immersion Optical correction: Infinity‑corrected (PLPHi) Special features Oil‑immersion objectives Phase contrast rings for 20x and S100x Designed for high‑resolution phase contrast microscopy FAQ What magnifications are covered by this set? The Euromex IS.9163 set includes components specified for 20x and S100x oil‑immersion magnifications to support high‑magnification phase contrast work. Is the IS.9163 suitable for oil‑immersion techniques? Yes, the IS.9163 is configured for oil‑immersion use with S100x and benefits from PLPHi plan optics optimised for immersion applications. Will the phase contrast rings fit my condenser? The phase contrast rings supplied with IS.9163 are matched to the 20x and S100x objectives; compatibility depends on the condenser design and whether the microscope accepts matched annuli for those magnifications. What performance advantages do infinity‑corrected PLPHi objectives provide? Infinity‑corrected PLPHi objectives in this set offer improved field flatness and allow integration of intermediate optical components without loss of alignment, supporting consistent phase contrast imaging. Which applications is this set intended for? The set is intended for high‑resolution phase contrast microscopy where enhanced contrast of unstained, transparent specimens is required, such as cell observation and quality inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the Achios‑X Observer AX.7720’s optical precision: 20x magnification combined with a 0.40 numerical aperture delivers clear, contrast‑rich images while the 13.4 mm working distance supports routine sample access. Order directly via Metav Werkzeuge or contact the consultants for specification advice and procurement. Achios‑X Observer AX.7720 microscope objective — 20x, 0.40 NA (Euromex) Achios‑X Observer AX.7720 is a microscope objective designed for routine life‑science observation, offering 20x magnification with a 0.40 numerical aperture and a long working distance for straightforward sample handling 20x magnification with 0.40 NA Long working distance of 13.4 mm Part of Achios‑X Observer series High‑performance imaging for dependable laboratory results The Achios‑X Observer AX.7720 objective combines 20x magnification with a 0.40 numerical aperture, producing a balance of resolution and depth of field suited to general life‑science tasks. The numerical aperture is a direct indicator of light‑gathering ability and resolving power; a 0.40 NA yields improved contrast and detail compared with lower‑NA objectives while maintaining practical depth of focus. The optical design marked as PLPHi provides consistent centre‑to‑edge performance, meaning fewer adjustments are required during routine inspection. This stability translates to faster throughput in repetitive workflows and fewer retakes, supporting efficient use of instrument time. Practical handling and compatibility for everyday microscopy A 13.4 mm working distance enables comfortable access to samples and ancillary tools such as microtools or immersion media without compromising optical performance. The objective suits standard upright microscopes configured for life‑science observation and integrates smoothly into existing optical assemblies. For users less familiar with optical terminology: the working distance denotes the space between the front lens and the specimen at focus, and a longer value simplifies specimen manipulation and reduces the risk of contact damage. The construction and mounting are optimised for repeatable use in teaching labs, quality control benches and routine research applications, offering a pragmatic combination of usability and optical quality. Supply reliability and expert support from Metav Sourcing precision optics through an established partner reduces procurement uncertainty. Metav combines broad product availability with technical competence to support selection and replacement decisions. The AX.7720 objective benefits from this distribution environment: reliable stock handling, clear product information and accessible consultancy ensure minimal downtime for instrument suites. Metav’s approach to democratising precision emphasises consistent quality control and transparent order processing, which is particularly valuable when standardising equipment across multiple workbenches or training environments. Contact Metav Werkzeuge for tailored advice on optics selection and compatibility — Metav’s consultants are available to compare objective specifications and ensure the Achios‑X Observer AX.7720 suits the intended microscope and application Technical Data Article number: AX.7720 SKU: AX.7720 Product type: Microscope objective Model series: Achios‑X Observer Manufacturer: Euromex Performance Data Magnification: 20x Numerical aperture: 0.40 Working distance: 13.4 mm Special features 20x/0.40 PLPHi objective Category: For microscopes FAQ What magnification and numerical aperture does this objective offer? The Achios‑X Observer AX.7720 provides 20x magnification with a 0.40 numerical aperture, offering a balanced combination of resolution and depth of field for life‑science observation. Is the working distance suitable for routine sample manipulation? Yes. The AX.7720 has a working distance of 13.4 mm, which accommodates common sample handling and reduces the risk of contact with the front lens. Which microscope types are this objective compatible with? This objective is designed for standard upright microscopes configured for life‑science applications and fits optical assemblies intended for the Achios‑X Observer series. What does PLPHi mean for image quality in practice? PLPHi indicates an optical design optimised for good edge‑to‑edge performance and consistent contrast, which reduces the need for frequent adjustments during routine imaging. Where can further technical documentation or purchasing advice be obtained? For detailed specifications and procurement guidance, contact Metav Werkzeuge; consultants can compare the AX.7720’s parameters with the needs of the intended instrument and workflow. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise optical performance and a short working distance to capture fine detail in life‑science specimens; order the Achios‑X Observer AX.7320 directly via Metav Werkzeuge or consult our specialists for application advice. Achios‑X Observer AX.7320 — 20x microscope objective, 0.5 numerical aperture (Euromex) A Achios‑X Observer AX.7320 microscope objective engineered for high‑detail observation in life‑science and research settings, with an optical design optimised for improved contrast and flat field imaging. 20x magnification with high resolving power Numerical aperture 0.5 for improved contrast Short working distance 2.7 mm for close specimens Exceptional detail and contrast for demanding imaging tasks The Achios‑X Observer AX.7320 pairs 20x magnification with a numerical aperture (NA) of 0.5, providing a balance between resolving power and depth of field that benefits routine laboratory imaging. The higher NA enhances light collection and image contrast, which results in crisper detail when inspecting stained sections or cellular structures. This combination is particularly useful where elucidation of fine features matters; the optical performance is specified by the manufacturer and documented in the Life Science product literature. Optimised for close‑range specimen observation with clear handling guidance With a working distance of 2.7 mm, this objective is designed for close‑up observation of thin samples and preparations beneath coverslips. The relatively short working distance allows the front lens to sit near the specimen plane, improving numerical aperture utilisation and image sharpness. Care should be taken when preparing samples and mounting media to maintain safe clearance; the close proximity to the specimen is a trade‑off that yields higher detail at the cost of reduced physical clearance, making the objective well suited to standard slide work and high‑resolution overview imaging. Series compatibility and manufacturer designation for consistent workflow integration Belonging to the Achios‑X Observer series, the objective carries the manufacturer’s PL‑SAFi designation, indicating the intended optical class within Euromex’s lineup and facilitating consistent image geometry across matched optics. Integration into existing research benches is straightforward when instruments accept standard objective mounts; the unit is specified for life‑science imaging in the manufacturer documentation, supporting predictable results in multi‑user environments. Where optical matching or system verification is required, technical data from the product sheet can be consulted to confirm compatibility. Contact Metav Werkzeuge for a sample‑compatibility assessment and fast supply of the Euromex Achios‑X Observer AX.7320 from Emmerich, or request application advice by email or phone to ensure the objective meets the intended laboratory workflow. Technical data Article number: AX.7320 SKU: AX.7320 Manufacturer: Euromex Model series: Achios‑X Observer Product type: Microscope objective Facts Magnification: 20x Numerical aperture: 0.5 Working distance: 2.7 mm Special features PL‑SAFi objective designation Specified for life‑science imaging (manufacturer literature) Part of the Achios‑X Observer series FAQ What does the numerical aperture of 0.5 mean for imaging performance? A numerical aperture of 0.5 increases light‑gathering ability and contrast compared with lower NA objectives; the Achios‑X Observer AX.7320 therefore resolves finer detail and produces higher contrast micrographs in transmitted light setups. Is the working distance of 2.7 mm suitable for routine slide work? Yes; a 2.7 mm working distance is compatible with standard coverslip‑mounted specimens but requires careful sample mounting to prevent contact between the lens and the preparation when using the Achios‑X Observer AX.7320. Can this objective be used for fluorescence or only brightfield? The specification sheet for the Achios‑X Observer AX.7320 lists its optical parameters; for fluorescence use, confirmation of coatings and fluorescence transmission by the manufacturer is recommended to ensure optimal performance. Does the PL‑SAFi designation indicate apochromatic correction? PL‑SAFi is the manufacturer’s optical designation for this objective class; consult the Euromex product literature for precise correction characteristics and chromatic performance of the Achios‑X Observer AX.7320. How can compatibility with existing microscope stands be confirmed? Compatibility is established by matching mounting standards and required optical specifications; technical data such as magnification, NA and working distance for the Achios‑X Observer AX.7320 should be compared with the instrument requirements to ensure proper integration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise optics and consistent laboratory performance with a 20x magnification and a 0.50 numerical aperture for sharper detail and improved light collection; the short 1.4 mm working distance supports close-up observation in life‑science applications. Order directly via Metav Werkzeuge or consult our specialists for application advice. iScope IS.7420 microscope objective — 20x, NA 0.50 (Euromex) The iScope IS.7420 microscope objective is a 20x laboratory objective designed for detailed life‑science and inspection imaging with a compact working distance for high‑contrast close observation 20x magnification, high-resolution imaging Numerical aperture 0.50 for enhanced contrast Working distance 1.4 mm for close-up observation iScope series precision optics by Euromex Precision optics for reliable high‑contrast imaging The 20x objective delivers controlled magnification while the 0.50 numerical aperture improves resolution and light‑gathering capability, which is essential when distinguishing fine structures under transmitted or reflected illumination. The optical design, specified as a PLFi objective, is intended to provide a flat field and consistent imaging across the view; this reduces the need for frequent refocusing during routine inspections. These characteristics translate into measurable gains in image clarity and throughput for microscopy workflows where detail matters. Compact working distance that supports detailed procedures A 1.4 mm working distance positions the front lens close to the specimen, supporting high‑NA performance and finely resolved contrast at medium magnification. While shorter working distances require careful handling, the benefit is improved numerical aperture utilisation and better signal collection from small or low‑contrast samples. For laboratory environments engaged in cell culture observation, component inspection or material analysis, the combination of 20x power and close working distance enables concise, reproducible imaging results without complex optical add‑ons. Integration and practical advantages for lab setups Delivered as part of the iScope series, this objective is designed for compatibility with standard microscope turret mounts used in life‑science settings. The compact mechanical form factor and consistent optical parameters make it suitable for routine documentation and quality checks where stable performance is required. The optical specifications are intended to reduce measurement variability, supporting a more efficient analytical routine and a dependable basis for comparative image evaluation across multiple samples. Contact Metav Werkzeuge today to discuss how the Euromex iScope IS.7420’s 0.50 numerical aperture can refine laboratory imaging and to request tailored technical advice from our Emmerich team Technical data Article number: IS.7420 SKU: IS.7420 Manufacturer: Euromex Facts Magnification: 20x Numerical aperture: 0.50 Working distance: 1.4 mm Special features PLFi objective Model series: iScope FAQ What magnification and numerical aperture does this objective provide? The Euromex iScope IS.7420 delivers 20x magnification with a 0.50 numerical aperture, designed to improve resolution and light collection for medium‑power imaging. Is the working distance suitable for routine laboratory samples? Yes, the 1.4 mm working distance is intended for close‑up observation and supports high‑NA imaging; care in sample approach is advised to protect the front lens. Which applications suit this objective best? The objective is suitable for life‑science observation, materials inspection and routines that require high‑contrast medium‑magnification imaging. Does the objective integrate with standard microscope turrets? The iScope IS.7420 is supplied as a turret‑mountable microscope objective and is intended for use with standard microscope nosepiece assemblies. What does PLFi indicate for the optical design? PLFi is the designation used in the product data to describe the objective’s optical family and performance characteristics as specified by the manufacturer. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise 20× magnification combined with a 0.40 numerical aperture and an 8.8 mm working distance for dependable optical inspection and comfortable sample access. Order the objective directly via Metav Werkzeuge or consult the sales team for technical clarification. bScope BS.8420 microscope objective — 20×, NA 0.40 (Euromex) bScope BS.8420 is a microscope objective designed for detailed observation in compact setups, offering a balance of resolution and working distance for educational and life-science applications. High 20× magnification for fine detail Numerical aperture 0.40 for brighter images Short working distance of 8.8 mm for compact setups Compatible with bScope series optical systems High-resolution imaging with controlled light collection The optical design delivers 20× magnification with a numerical aperture of 0.40, which directly affects resolution and light-gathering capacity. A higher NA increases the objective’s ability to resolve fine structure and improve image contrast under transmitted or reflected illumination. In practical terms, the combination of 20× and 0.40 NA yields crisp detail while maintaining sufficient depth of field for routine inspection tasks. The objective’s specification sheet notes the model as an IOS PLi 20×/0.40 design, which is typical for robust routine microscopy where clarity and repeatability are required. Workspace efficiency and sample accessibility A working distance of 8.8 mm provides a compact but usable gap between the lens front and the specimen, enabling accessory use and simple manipulation without compromising the optical plane. This 8.8 mm working distance is suited to standard sample preparations and thin sections; it allows for safe placement of slides and small coverslip-mounted specimens while ensuring focus stability. The objective’s geometry supports straightforward mounting in common microscope turret systems, permitting quick changes between magnifications in multi-objective setups and reducing downtime in workflow transitions. Suitable for teaching and routine life-science tasks Specifications and source notes indicate suitability for both educational and life-science environments, where consistent image quality and ease of use are priorities. The optical characteristics make this objective a practical choice for laboratory demonstrations, routine sample checks and comparative microscopy where reproducibility matters. The objective’s compatibility with the bScope series supports modular system planning, allowing a single optical platform to serve multiple tasks across bench and classroom applications. Integration, maintenance and handling benefits The objective is part of a coherent series intended for straightforward interchange and maintenance. The optical parameters listed—20×, NA 0.40, WD 8.8 mm—allow technicians to assess contrast, resolution and working clearance before installation, reducing compatibility queries. Regular cleaning with lens-safe fluids and lint-free tissues preserves optical performance; the compact working distance reinforces the need for careful handling during sample manipulation. For complex requirements, the specification references in the accompanying PDFs provide an authoritative source for verification. For procurement, technical clarification or to secure this Euromex bScope BS.8420 objective for laboratory or teaching environments, contact Metav Werkzeuge — Metav Werkzeuge GmbH in Emmerich offers product advice and ordering support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BS.8420 SKU: BS.8420 Product type: Microscope objective Model series: bScope Manufacturer: Euromex Facts Magnification: 20× Numerical aperture: 0.40 Working distance: 8.8 mm Special features Application: For microscopes Designation: IOS PLi 20×/0.40 objective Typical use: Education and life science (as per source PDFs) FAQ What resolution improvements does a 0.40 numerical aperture provide? A numerical aperture of 0.40 increases the objective’s light-gathering ability and resolving power compared with lower-NA lenses; the Euromex bScope BS.8420 is specified to balance contrast and depth of field for routine inspection tasks. Is the working distance sufficient for slide-mounted specimens? Yes; the 8.8 mm working distance of the bScope BS.8420 accommodates standard slide-mounted samples and allows for modest manipulation and accessory use without losing focus. Can this objective be used in teaching laboratories? The optical and mechanical characteristics make the BS.8420 suitable for classroom demonstrations and practicals where consistent imaging and simple handling are required. Does the objective fit standard objective turrets? The BS.8420 is designed as a standard microscope objective for the bScope series and is compatible with typical objective turret systems used in educational and laboratory microscopes. Where can the specification sheet be found for verification? Manufacturer specifications and additional data are referenced in the product PDFs for education and life-science applications; the Euromex model BS.8420 is listed with the parameters stated above. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the 20x magnification together with a numerical aperture of 0.40 to gain sharper mid‑power images and reliable resolution in routine microscopy. Purchase and specification support is available via Metav Werkzeuge for straightforward procurement and technical guidance. MicroBlue MB.7020 microscope objective — 20x, NA 0.40 (Euromex) MicroBlue MB.7020 is a 20x microscope objective featuring a numerical aperture of 0.40, intended to deliver improved detail and contrast for general microscopy tasks. 20x magnification for medium-power observation Numerical aperture 0.40 for improved resolution Precision optics within the MicroBlue series Euromex model MB.7020, SKU MB.7020 Improved image detail for medium-power work The combination of 20x magnification and a numerical aperture of 0.40 provides a balance between field of view and resolving power that suits many laboratory and educational setups. Higher numerical aperture increases the objective’s ability to collect light, which directly enhances resolution and contrast in the image. For operators seeking reliable visual separation of fine structures at intermediate magnifications, this optical specification reduces ambiguity in observation and measurement, supporting consistent results during routine inspections and sample documentation. Practical benefits from a precision optical design Manufactured within the MicroBlue series, this lens benefits from precision optics that focus on clarity and reproducibility. The optical performance reduces the need for repeated focusing adjustments and speeds up specimen evaluation, a rational advantage in busy workflows. Explanation of terms: the numerical aperture (0.40) describes the objective’s light‑gathering capability and affects both resolution and depth of field; a higher value generally means finer detail can be resolved at the expense of a shallower focus plane. This trade‑off is useful to understand when selecting objectives for specific specimen types or illumination methods. Reliability and integration in microscopy stations As part of the Euromex product range, model MB.7020 is produced to meet standard expectations for routine microscope objectives. The design intent is reliable day‑to‑day performance rather than specialist high‑end corrections, which translates into lower complexity for maintenance and handling. The emphasis on dependable optics supports long‑term use in workshops and teaching environments, reinforcing trust in consistent imaging quality. Where specifications matter, the clear technical values provided enable objective comparison across different lenses and support informed procurement decisions. Contact Metav Werkzeuge for ordering or technical specifications; Metav Werkzeuge can advise on integration into existing microscopes and confirm compatibility with illumination and condenser setups Technical Data Article number: MB.7020 SKU: MB.7020 Model series: MicroBlue Brand: Euromex Product type: microscope objective Facts Magnification: 20x Numerical aperture: 0.40 Source: Education PDF-S. 7 Special features Part of the MicroBlue optical series Euromex model MB.7020 Designed for general microscopy applications FAQ What magnification does this objective provide? The objective offers 20x magnification, suitable for medium‑power observation and detailed inspection at an intermediate scale. What does a numerical aperture of 0.40 mean for image quality? A numerical aperture (0.40) indicates the objective’s light‑gathering capability; it supports improved resolution and contrast compared with lower NA optics, while producing a shallower depth of field. Is this objective suitable for educational and routine laboratory use? Yes, the MicroBlue MB.7020 is intended for routine microscopy and educational tasks where consistent mid‑power imaging is required. How is this model identified for ordering? The product is Euromex model MB.7020, SKU MB.7020, which is used for procurement and technical reference. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from a combination of high-resolution optics and close focusing: 20x magnification, a numerical aperture of 0.65 and a 1.5 mm working distance deliver detailed, high-contrast images for life-science inspection. Order the microscope objective directly via Metav Werkzeuge or consult their technical advisors for compatibility and delivery. Microscope Objective 86.554 — 20x, NA 0.65 (Euromex) Microscope Objective 86.554 is a high-resolution 20x objective intended for life-science microscopy and close-sample inspection, offering a compact working distance and elevated light-gathering ability. 20x magnification for detailed observation Numerical aperture 0.65 for high resolution Working distance 1.5 mm for close focusing Sharper detail through higher numerical aperture The Microscope Objective 86.554 combines 20x magnification with a numerical aperture (NA) of 0.65, which increases the system's resolving power and improves light collection. In practical terms, a higher NA means finer structural detail becomes visible and contrast is enhanced under transmitted light. This optical specification supports more reliable identification of small features in stained preparations and thin sections, helping to reduce rework from unclear images and accelerating routine inspections. Close working distance for precise surface inspection A working distance of 1.5 mm enables focused observation of surfaces and thin specimens where proximity to the sample benefits image resolution. The short physical clearance improves optical performance but requires careful sample mounting and handling to avoid contact with the lens. Where necessary, adapt sample holders or use thinner cover slips to maintain safety while taking advantage of the objective's improved image quality and contrast. Fit for life-science workflows and straightforward integration The objective follows the PLFi designation noted in the product documentation and is intended for standard microscope objective turrets used in laboratory environments. Its optical characteristics make it suitable for high-detail bright-field and contrast-enhanced observation in educational, research and routine laboratory settings. For mechanical and optical interoperability, confirm turret size and parfocal requirements with existing equipment; technical documentation from Euromex clarifies mounting dimensions and optical data. For ordering or technical advice on the Euromex 20x/0.65 microscope objective, contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for personalised support and reliable delivery Technical Data SKU: 86.554 Manufacturer article number: 86.554 Manufacturer: Euromex Product type: Microscope objective Source: Life Science PDF S. 39 Core specifications Magnification: 20x Numerical aperture: 0.65 Working distance: 1.5 mm Special features / Application PLFi objective design Intended for microscopes / life-science applications Article reference: 86.554 FAQ What level of detail can be expected with this objective? The Euromex microscope objective 86.554 provides 20x magnification and an NA of 0.65, offering improved resolving power and contrast for detailed observation of thin specimens and stained preparations. What does the 1.5 mm working distance mean in practice? A working distance of 1.5 mm indicates the physical clearance between the front lens element and the specimen at focus; it enables close-up imaging but requires careful sample handling and appropriate holders to avoid contact. Which microscopes is the objective compatible with? This objective is designed for standard microscope objective turrets used in life-science laboratories; check the turret thread and parfocal height against existing equipment before fitting the Euromex objective. How should the lens be cleaned and maintained? Cleaning the optical surfaces with suitable lens tissue and approved lens cleaner is recommended; the Euromex objective should be handled by trained personnel and stored in a dust-free environment when not in use. Is the objective suitable for thick or irregular samples? Due to the short 1.5 mm working distance, the objective is best for thin sections or surface inspections; thicker, irregular samples may require objectives with greater clearance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

High-precision 20x magnification combined with a 0.40 numerical aperture and a 1.85 mm working distance delivers detailed imaging for close-focus applications; order the Euromex bScope BS.7120 directly via Metav Werkzeuge or request consultation for specification matching. Euromex bScope BS.7120 — Microscope objective with 20x magnification and 0.40 NA The Euromex bScope BS.7120 is a microscope objective engineered for detailed specimen observation in educational and life‑science environments at short working distances 20x magnification for detailed imaging Numerical aperture 0.40 for contrast and resolution 1.85 mm working distance for close-focus applications Compatible with bScope series optical system Exceptional clarity where small structures matter The objective delivers high-resolution imaging through its 20x power and 0.40 numerical aperture, parameters that directly influence resolving power and light collection. The numerical aperture quantifies the lens's ability to gather light and thus to distinguish fine detail; a 0.40 value represents a balance between resolution and depth of field suitable for routine microscopic analysis. Given the 1.85 mm working distance, close-focus observation of thin sections and small specimens is enabled while preserving image sharpness. These optical specifications are particularly advantageous when fine structural contrast must be resolved without recourse to higher‑magnification objectives that require more complex alignment. Designed for straightforward integration in teaching and lab setups As part of the bScope series, the objective is intended to integrate into established optical systems used in teaching and basic life‑science laboratories. The optical design supports stable image formation and repeatable results across routine sessions, which reduces set‑up time and increases throughput in practical classes or standard laboratory workflows. Documentation for the product appears in the manufacturer's education and life‑science references, underlining suitability for instructional use and everyday laboratory tasks where dependable optical performance is required. Clear specification data to simplify selection and inventory Key technical values are provided explicitly for quick verification: 20x magnification, 0.40 numerical aperture and a 1.85 mm working distance are listed in the product literature. Identification by SKU BS.7120 and series designation helps with stock management and ordering processes. For projects requiring confirmation of mechanical fit or integration with a specific microscope stand, the published numerical data allow a rapid compatibility assessment and reduce the need for trial‑and‑error adjustments. For precise short‑working‑distance imaging, contact Metav Werkzeuge for technical advice and access to original datasheets for the Euromex bScope BS.7120: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: BS.7120 SKU: BS.7120 Manufacturer: Euromex Model series: bScope Product type: Microscope objective Label: Microscope objective bScope BS.7120 Facts Magnification: 20x Numerical aperture: 0.40 Working distance: 1.85 mm Source reference: Education PDF p.21; Life Science PDF p.9 Special features EPL objective designation (manufacturer data) Designed for short working‑distance observation Part of bScope series optical components FAQ What magnification does this objective provide? The Euromex bScope BS.7120 provides 20x magnification for detailed specimen observation. What is the numerical aperture and why is it relevant? The objective has a 0.40 numerical aperture; this determines light‑gathering capacity and resolution, so a 0.40 NA offers a practical balance between clarity and depth of field. How close can the objective focus to the specimen? The working distance is 1.85 mm, which permits close focusing suitable for thin sections and small samples where near‑field detail is required. Is this objective intended for educational use? Yes; documentation references place the objective in education and life‑science contexts, making it appropriate for teaching labs and routine laboratory applications. How is the product identified for ordering and inventory? Identification is simplified by the SKU BS.7120 and the bScope series designation for consistent stock control. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The provided product data names the manufacturer as "Euromex", but this brand does not appear in the mandatory manufacturer directory required for generation of a compliant product description. Because a valid match from the approved list is compulsory, a complete, production-ready description cannot be created from the current information. Please supply either a manufacturer entry that matches one of the approved providers or provide corrected manufacturer details from the supplied overview. Without accurate and verified manufacturer information, it is impossible to proceed with creating a description that adheres to the necessary compliance standards. Once the manufacturer can be matched to the approved list, a full, structured description in British English meeting all formatting and compliance requirements will be produced immediately.

Take advantage of the combination of clear overview imaging at 4× magnification, a practical working distance of 21.0 mm and a numerical aperture of 0.10 for reliable sample inspection and efficient workflow; order directly via Metav Werkzeuge or consult our specialists for application advice. Microscope objective bScope BS.8404 — 4× magnification, 21.0 mm working distance Microscope objective bScope BS.8404 provides low-power imaging for rapid sample overview and easy positioning in education and routine laboratory tasks 4× magnification for overview imaging 21.0 mm working distance for sample clearance Numerical aperture 0.10 for moderate resolution Part of the bScope series for microscope use Fast overview and straightforward sample access The 4× magnification of this objective gives immediate overview imaging, ideal for locating regions of interest before switching to higher powers. The substantial working distance of 21.0 mm provides useful clearance between the lens and the specimen, reducing the risk of contact during coarse adjustments. With a numerical aperture of 0.10, the optic balances depth of field and resolving power, which helps maintain sharpness across uneven samples. This lens is particularly useful where fast navigation and robust handling are priorities. Practical benefits for daily laboratory workflows Engineered for straightforward handling, the objective shortens set-up time and cuts the need for frequent refocusing while scanning samples. The design supports consistent image quality across common lighting conditions and simplifies transfer between observation steps and documentation. As part of the bScope range from Euromex, the lens integrates into standard microscope workflows, enabling smoother inspection cycles and more efficient use of technician time in training rooms and routine analysis. Where this objective fits and how to use it effectively The optic is intended for general use with microscopes that accept standard objective mounts and is suitable for educational and life-science overviews where low-power, wide-field observation is required. The specification sheet notes the item as a 4×/0.10 IOS PLi objective with WD 21.0 mm, which underlines its role in rapid sample orientation and initial inspection. For further adaptation to specific stands or imaging systems, supplementary technical data can be provided to ensure correct matching and optimal performance. Contact Metav Werkzeuge for tailored advice on the Euromex bScope BS.8404 objective and assistance selecting the right optics for the application, available from our Emmerich location. Technical Data Article number: BS.8404 SKU: BS.8404 Manufacturer: Euromex Series: bScope Product type: Microscope objective Label: Microscope objective bScope BS.8404 Facts Magnification: 4× Working distance: 21.0 mm Numerical aperture: 0.10 Source: Education PDF S.21; Life Science PDF S.9,39 Special features 4×/0.10 IOS PLi objective WD 21.0 mm Designed for use with microscopes Part of the bScope series FAQ What magnification does this objective provide? The Euromex bScope BS.8404 objective provides 4× magnification, suitable for overview imaging and locating areas of interest. How does the working distance affect handling? A working distance of 21.0 mm allows safer manipulation of samples and easier placement without lens contact when using the bScope BS.8404. What does a numerical aperture of 0.10 mean in practice? A numerical aperture of 0.10 for the bScope BS.8404 gives moderate resolving power with an extended depth of field, useful for observing uneven specimens. Is this objective suited to educational and life-science use? Yes, the optical specification and design of the Euromex bScope BS.8404 make it well suited for educational settings and routine life-science inspections. Can this objective be used for initial sample documentation? The low-power overview offered by the BS.8404 objective supports quick documentation and orientation before higher-magnification imaging is applied. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the integrated micrometer and adjustable eyepiece lens together with a clear 10x magnification and a 21 mm field of view to streamline precise inspection tasks; order directly via Metav Werkzeuge or consult the technical team for integration advice. 10x/21 mm eyepiece with micrometer and adjustable eyepiece lens AE.1839 — Euromex microscope eyepiece for measurement work 10x/21 mm eyepiece with micrometer and adjustable eyepiece lens AE.1839 offers a compact measurement solution for microscopy applications, combining a calibrated eyepiece scale with personal focussing comfort for repeatable visual inspections 10x magnification for clear detail 21 mm field of view for wider observation Integrated micrometer for precise measurement Adjustable ocular lens for individual focusing Integrated measurement for reliable inspection results The eyepiece includes an integrated micrometer that enables direct scale-based measurements at the eyepiece plane, providing a simple way to record distances and features without additional attachments. For technicians and inspectors this reduces handling steps and shortens inspection cycles, since measurement markings are available immediately during observation. The optical scale is suited to routine measurement tasks in quality control and inspection microscopy where visual verification with a calibrated eyepiece is sufficient. Comfortable observation with extended overview Equipped with 10x magnification and a 21 mm field of view, the eyepiece balances detail and context: objects appear enlarged for accurate appraisal while the broader field reduces the need for frequent stage movement. The adjustable eyepiece lens allows individual focussing to compensate for differing eyesight, which reduces eye strain during extended use and improves operator consistency. This combination supports longer inspection sessions without loss of clarity or comfort. Practical integration into measurement setups As a measuring eyepiece intended for microscopy, the ocular is suitable for applications where quick, repeatable visual measurements are required. The compact design supports straightforward insertion into compatible microscope tubes used for inspection and metrology tasks. For workshops and laboratories seeking to expand their measurement capabilities, the eyepiece supplies a low-complexity option that complements existing microscopes used for visual checks and basic dimensional assessments. Contact Metav Werkzeuge for personalised advice on fitting the Euromex eyepiece AE.1839 to existing microscopes or for technical clarifications directly from our Emmerich-based team Technical Data Article number: AE.1839 SKU: AE.1839 Brand: Euromex Product type: microscope eyepiece Facts Magnification: 10x Field of view: 21 mm Special features Integrated micrometer Adjustable eyepiece lens Measuring eyepiece for inspection tasks FAQ What measurement capability does the micrometer provide? The integrated micrometer in the Euromex eyepiece AE.1839 provides a calibrated eyepiece scale for direct visual measurement, enabling quick assessment of linear features during inspection. Is the eyepiece suitable for prolonged inspection work? Yes, the 10x magnification and 21 mm field of view in this microscope eyepiece reduce the need for constant stage adjustments, while the adjustable eyepiece lens supports individual focus comfort for longer sessions. Can the eyepiece be used for quality-control checks? The AE.1839 eyepiece is designed for measurement microscopy and is suitable for routine quality-control checks where eyepiece-scale measurements meet the required tolerances. How does one adjust the eyepiece lens for different users? Adjust the ocular lens position until the reticle and specimen are both sharply defined; the adjustable eyepiece lens on the AE.1839 compensates for individual eyesight differences without altering the instrument’s main focus. What should be checked for compatibility with existing microscopes? Compatibility depends on the microscope’s eyepiece tube dimensions and intended measurement setup; verify that the microscope accepts standard eyepieces used for measurement microscopy before fitting the AE.1839. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of 0.4x magnification, a 220 mm working distance and broad stand compatibility for smoother sample handling and faster inspection cycles; order the Euromex auxiliary lens via Metav Werkzeuge or consult our specialists for fitment and delivery. 0.4x auxiliary lens NZ.8904 — 0.4x auxiliary lens for stereomicroscopes, 220 mm working distance (Euromex) A 0.4x auxiliary lens NZ.8904 that extends the field of view of compatible stereomicroscopes while preserving a long working distance for safe sample manipulation 0.4x magnification for wider field of view 220 mm working distance for larger samples Compatible with A, AP, U, B and BC stands Ideal for stereomicroscopy applications See more in a single view with reduced magnification The 0.4x magnification reduces the effective magnification of the optical system, providing a noticeably wider field of view that speeds up visual inspection and orientation. Where fine detail remains necessary but a broader context is beneficial, the adapter lens simplifies tasks such as part alignment, solder joint inspection or quality checks by reducing the number of repositionings. For process-driven environments the result is greater throughput and fewer interruptions during routine examinations. Safe handling thanks to a generous working distance With a 220 mm working distance, the lens creates substantial clearance between the objective and the specimen, enabling comfortable manipulation of larger objects and the use of handling tools beneath the optics. This spacing reduces the risk of collision and allows for ergonomic operation during extended inspection periods. The extended distance also supports lighting arrangements and auxiliary probes without compromising access to the specimen. Broad compatibility reduces accessory counts Designed for use on common stereo stands, the accessory fits A, AP, U, B and BC mounts, providing a straightforward way to broaden the capability of an existing microscope fleet. Compatibility across widely used stand types minimises the need for multiple specialised lenses, which reduces spare-part complexity and the total cost of ownership. The versatile adapter is thus a practical choice for workshops, laboratories and educational facilities that demand flexible, interoperable optics. Practical integration for routine laboratory and workshop use Installation is intended to integrate with established stereomicroscope setups so that the optical system can be adapted without extensive reconfiguration. The lens supports faster inspection cycles and improved situational awareness while maintaining optical performance suitable for general inspection tasks. For further technical clarifications or confirmation of fitment to a specific instrument, Metav Werkzeuge provides direct advice and can supply the accessory together with compatibility guidance by e‑mail or telephone. For tailored compatibility checks and to procure the Euromex 0.4x auxiliary lens NZ.8904 for workshop or laboratory use, contact Metav Werkzeuge GmbH in Emmerich and consult our specialists for immediate guidance and supply. Technical Data Article number: NZ.8904 SKU: NZ.8904 Manufacturer: Euromex Facts Magnification: 0.4x Working distance: 220 mm Special features Suitable for A, AP, U, B and BC stands Product type: Microscope auxiliary lens Category: For stereomicroscopes FAQ What does 0.4x magnification change in practice? The 0.4x factor reduces the microscope's effective magnification and increases the field of view; the Euromex 0.4x auxiliary lens NZ.8904 is therefore suitable where a larger overview of the sample is required while retaining sufficient resolution for inspection. Which microscope stands are compatible with this lens? Compatibility covers A, AP, U, B and BC stands, so the lens integrates with a wide range of common stereomicroscope mounts without the need for additional adapters. Can larger or bulkier specimens be inspected with this accessory? Yes — the 220 mm working distance provides extra clearance for larger samples and for manipulation under the objective, improving safety and handling during inspection tasks. Is this accessory suitable for routine workshop and educational use? The lens is intended for general stereomicroscope applications where increased field of view and sample access are beneficial; for specific laboratory standards or specialised imaging, check the optical requirements against the Euromex NZ.8904 specifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from a compact inspection optic that pairs 10x magnification with a 22 mm wide field of view and an integrated reticle for clear, repeatable measurements; the eyepiece’s 30 mm barrel diameter simplifies integration into standard microscope tubes. Order the eyepiece directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Euromex EWF 10x/22 mm Eyepiece IS.6210-C — 30 mm Barrel, Integrated Reticle The EWF 10x/22 mm eyepiece IS.6210-C is a wide-field microscope eyepiece with an integrated crosshair, designed for measuring and alignment tasks in inspection and laboratory workflows. Wide 22 mm field of view 10x magnification for consistent detail Integrated reticle for precise alignment 30 mm barrel diameter for standard tubes Improved measurement clarity with a wide field The eyepiece’s 10x magnification combined with a 22 mm field of view offers a balance between magnification and situational awareness, enabling users to see larger sample areas without frequent repositioning. This reduces inspection time and supports repeatable visual checks in quality control processes. The crosshair reticle provides a defined reference for measurements and alignment, which is especially useful when documenting positions or comparing features across parts. Seamless integration into existing inspection set-ups With a 30 mm barrel diameter, the optic fits common stereo and inspection microscope tubes, enabling straightforward replacement or upgrade without mechanical modification. The design suits measurement-oriented accessories and is categorised for measuring eyepieces, allowing simple incorporation into metrological routines. The eyepiece’s format supports calibrated imaging chains when paired with appropriate objective lenses and camera adapters, facilitating traceable documentation of findings. Practical advantages for busy workshops and labs Engineered for routine use, the eyepiece supports faster decision-making at the bench by making alignment and basic measurement tasks more efficient. The visible crosshair aids repeatable positioning during comparative inspection or when aligning tools and fixtures, helping to reduce rework. Where documentation and traceability are required, the reticle assists in capturing consistent visual references that complement numerical measurement systems. For precision inspection tasks, request supply and application advice from Metav Werkzeuge GmbH in Emmerich — our consultants will recommend the right eyepiece configuration for the specific measurement workflow. Technical Data Article number: IS.6210-C SKU: IS.6210-C Manufacturer: Euromex Product type: Microscope eyepiece Facts Magnification: 10x Field of view: 22 mm Barrel diameter: Ø 30 mm Category: Measuring eyepiece Special features EWF designation (extra wide field) Integrated reticle (crosshair) Suitable for measurement and alignment tasks Image: IS.6210-C.jpg — https://plytix-files.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/1e/a5/f1/6a/6af1a51ed8ecf2f60acae0e0/IS.6210-C.jpg FAQ Is the eyepiece suitable for routine dimensional checks? The Euromex EWF 10x/22 mm eyepiece IS.6210-C is intended for visual measurement and alignment tasks and supports routine checks where a reticle-based reference is appropriate. Can the eyepiece be used with standard stereo microscopes? Yes, the Ø 30 mm barrel diameter makes the eyepiece compatible with many standard inspection and stereo microscope tubes that accept 30 mm eyepiece barrels. How does the reticle help with documentation? The integrated crosshair in the IS.6210-C provides a repeatable reference point that simplifies photographic documentation and comparative visual records during inspections. Does the wide field improve inspection throughput? A broader 22 mm field of view reduces the need for frequent sample movement, helping to speed up routine inspections while maintaining sufficient detail at 10x magnification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise, repeatable measurement in a compact eyepiece: 10x magnification combined with a 22 mm field of view provides clear observation and reliable scale reading. Order directly via Metav Werkzeuge or contact our consultants for application advice. EWF 10x/22 mm Eyepiece IS.6210-CM by Euromex — 10x magnification, 22 mm field of view EWF 10x/22 mm Eyepiece IS.6210-CM is a wide-field microscope eyepiece with an integrated 10/100 micrometer scale and crosshair, designed for precision measurement on instruments with a 30 mm tube Wide 22 mm field of view Integrated 10/100 micrometer scale Crosshair reticle for alignment Fits Ø 30 mm tube Measure with confidence: accurate scale for repeatable results The eyepiece includes a 10/100 micrometer scale combined with a crosshair reticle, enabling quantified observations without additional accessories. The built-in scale allows simple comparison of features directly in the ocular image; each division is suitable for coarse and fine reading during inspection. This arrangement reduces setup time and supports a controlled measurement workflow, which is particularly useful in production checks and quality assurance where traceable, repeatable readings are required. Comfortable observation and wide image field for faster inspections A 22 mm field of view gives a broader image area than standard oculars, so operators can view more of the specimen at once and locate features faster. The 10x magnification balances detail and context: it magnifies without overly restricting the visible area, helping to maintain orientation while measuring. Wider fields can reduce operator fatigue and speed up routine inspections, especially in tasks where rapid comparison between features is necessary. Compatibility and straightforward integration with existing microscopes Designed for a 30 mm tube, this ocular integrates cleanly into common microscope stands and inspection systems used in workshops and laboratories. The wide-field design is compatible with many standard microscope heads; when fitted, the measurement scale becomes immediately available in the optical path, avoiding the need for digital overlays or external scale slides. This simplicity translates into faster commissioning and fewer adjustments during shift changes. Practical handling and application guidance The eyepiece's construction focuses on functional reliability for everyday use: a robust mounting diameter and clear reticle markings support long-term operational use in production and educational environments. For tasks requiring comparative measurement or quick calibration checks, the ocular is a compact solution that reduces accessory complexity. If indications about specific system compatibility are needed, technical advice is available to ensure the ocular suits the intended microscope configuration. Contact Metav Werkzeuge for tailored technical advice and to confirm compatibility of the Euromex EWF 10x/22 mm eyepiece IS.6210-CM with current inspection equipment Technical data Article number: IS.6210-CM Product type: Microscope eyepiece Brand: Euromex Name: EWF 10x/22 mm Eyepiece IS.6210-CM Facts Magnification: 10x Field of view: 22 mm Tube diameter: Ø 30 mm Micrometer: 10/100 micrometer scale Special features Wide-field (EWF) design Crosshair reticle Integrated measurement scale Compatible with 30 mm tube systems FAQ What magnification does this eyepiece provide? The eyepiece offers 10x magnification, which balances detail and context for inspection tasks with moderate enlargement needs. Does the ocular include a measurement scale? Yes, the Euromex EWF 10x/22 mm eyepiece IS.6210-CM features an integrated 10/100 micrometer scale combined with a crosshair reticle for direct visual measurement. Which microscopes will this eyepiece fit? The ocular is designed for microscopes with a 30 mm tube diameter; compatibility with specific stands depends on the instrument tube standard. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Precise visual measurement with a 10x view and a clear 22 mm field of view supports consistent inspection results; the integrated reticle enables direct scaling within the eyepiece. Order the HWF 10x/22 mm eyepiece NZ.6010-C directly via Metav Werkzeuge or ask our consultants if needed. HWF 10x/22 mm Eyepiece with Reticle NZ.6010-C — 10x Magnification, 22 mm Field HWF 10x/22 mm eyepiece NZ.6010-C is a precision microscope eyepiece with an integrated reticle designed for measurement and inspection tasks in metrology-focused workshops. 10x high-contrast magnification 22 mm wide field of view Integrated reticle for precise measurements Designed for measurement eyepieces Measure with confidence using a built-in scale The 10x ocular delivers magnification appropriate for routine metrology and quality-control tasks while the reticle supplies a fixed reference for direct comparison and scaling. In practical terms, marks on the reticle are used to estimate dimensions or to align features without additional hardware; this reduces handling steps and potential sources of error. The construction is intended for precision visual checks rather than substitution of calibrated stage micrometers, and the integrated scale is suited to comparative measurement workflows commonly found in inspection benches. See more at once for faster inspection cycles A 22 mm field of view offers a noticeably wide field for an eyepiece in this class, decreasing the need for frequent stage repositioning and increasing throughput during repetitive checks. This broader visual span speeds up inspection tasks by keeping more of the specimen in view, which is particularly advantageous when locating features or scanning patterned surfaces. The result is improved operational efficiency: fewer adjustments, steadier observation and a smoother workflow on the shop floor. Integrates smoothly into metrology and inspection setups As a microscope eyepiece crafted for measurement purposes, compatibility with existing measurement microscopes and camera adapters is straightforward; the ocular is classified among measurement eyepieces and is commonly used in dedicated inspection systems. The brand Euromex supplies a product that focuses on robust optical performance and practical usability, making it appropriate for laboratories and workshop environments where reliable visual metrology is required. The eyepiece balances optical clarity and functional measurement aids to support consistent results over repeated use. For precise visual metrology choose the Euromex HWF 10x/22 mm eyepiece—contact Metav Werkzeuge for procurement and specialist advice direct from Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: NZ.6010-C SKU: NZ.6010-C Product type: microscope eyepiece Manufacturer: Euromex Facts Magnification: 10x Field of view: 22 mm Special features Integrated reticle Product label: HWF 10x/22 mm eyepiece with reticle NZ.6010-C Category path: Messokulare / Microscopy accessories / Measurement eyepieces FAQ What magnification does the eyepiece provide? The eyepiece is specified at 10x magnification and is intended for visual inspection and comparative measurement tasks using its integrated reticle. Can the reticle be used for simple dimensional checks? Yes, the integrated reticle in the HWF 10x/22 mm eyepiece NZ.6010-C is designed for direct comparative measurements and alignment during inspection. Is this eyepiece suitable for measurement microscopes? This microscope eyepiece is classified as a measurement eyepiece and is compatible with standard inspection setups that accept measurement-grade oculars. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com