Take advantage of the 1 W LED performance and the simple replacement design to restore reliable, low-heat illumination in laboratory and teaching microscopes; order the unit via Metav Werkzeuge or consult their specialists for compatibility details. MicroBlue MB.9981 — Microscope replacement illumination (1 W LED) by Euromex The MicroBlue MB.9981 is a compact replacement light designed to restore consistent illumination for microscopes and educational instruments, offering a low-heat 1 W LED solution for routine inspection and imaging. 1 W LED replacement unit Compatible with MicroBlue series Stable, low-heat illumination Consistent light for precise inspection The 1 W LED module delivers steady output that supports clear visual inspection and image capture. LED technology converts electrical energy into light with high efficiency, which results in consistent illumination across the field of view; this reduces flicker and variability often encountered with older lamp types. The low thermal emission of the LED helps to avoid heating delicate specimens, which is particularly relevant for prolonged observation sessions in schools, laboratories and light industrial settings. The compact light source is designed to produce a stable colour temperature suitable for routine microscopy without introducing excessive glare. Designed for quick replacement and minimal downtime As a dedicated replacement unit, the module is intended to fit the MicroBlue product family with straightforward installation procedures. The replacement concept reduces maintenance effort and limits instrument downtime, enabling workshops and teaching facilities to return equipment to service promptly. The modular approach also simplifies stockkeeping for service departments: a single spare part can maintain multiple instruments in the same model range, which supports efficient inventory management and uninterrupted workflows. Better contrast and user comfort during extended use Reliable, uniform lighting improves image contrast and helps operators maintain focus during detailed work. By providing a stable light source with low heat output, the unit contributes to reduced eye fatigue for users engaged in prolonged examinations or repetitive tasks. The solution is appropriate for educational demonstrations, routine quality checks and basic laboratory microscopy where dependable, easy-to-service illumination is more valuable than high-end imaging features. The MicroBlue MB.9981 supports practical performance improvements without complex setup or calibration. For reliable, low-heat LED illumination from Euromex, contact Metav Werkzeuge in Emmerich for availability and technical advice — Metav Werkzeuge can assist with ordering and compatibility checks. Technical Data Manufacturer: Euromex Article number: MB.9981 SKU: MB.9981 Model series: MicroBlue Product type: Microscope replacement illumination Additional info: 1 W LED replacement unit Facts Power: 1 W Special features Replacement unit LED technology Category: Lighting (microscopy accessories) Intended for microscopes Stable, low-heat illumination FAQ Is this lamp compatible with existing MicroBlue microscopes? The replacement unit is specified for the MicroBlue series; the MB.9981 is designed to match the series’ illumination fittings, but compatibility should be checked against the instrument’s lamp socket and mounting. What is the power rating and primary benefit of the light source? This Euromex module is a 1 W LED replacement unit that offers efficient, consistent illumination with low heat output, improving specimen safety and operator comfort. Can the lighting module be used in older microscopes? Use in older equipment depends on the physical and electrical compatibility of the lamp holder; the unit is intended for MicroBlue instruments, so adaptation may be necessary for non‑standard fittings. Does the LED reduce specimen heating compared with traditional lamps? Yes, the LED technology used in this replacement unit emits considerably less heat than many conventional bulbs, which helps to protect temperature‑sensitive samples during inspection. Is the module intended for teaching and routine laboratory use? The design and performance of the MB.9981 make it well suited for education, routine inspections and general laboratory tasks where dependable, low‑maintenance illumination is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise, focused illumination and an extended 100 cm reach provided by the flexible single‑arm design, and is ideal for close‑up inspection and microscopy lighting. Order the unit directly via Metav Werkzeuge or consult their specialists for application advice. LE.5216 Single‑arm Flexible Light Guide — 100 cm reach, 4 mm bore (Euromex) The LE.5216 single‑arm flexible light guide delivers directional illumination for microscopy and inspection tasks, combining reach and a fine‑bore exit for targeted light delivery Flexible single‑arm with 100 cm reach 4 mm bore for focused illumination Tailored for microscopy and inspection Compact routing and stable positioning Precise reach for confined inspection tasks A flexible light guide with a 100 cm length and 4 mm diameter provides the practical benefit of reaching confined or awkward positions without obstructing the work area. The flexible single‑arm design keeps the light path stable once arranged, enabling consistent directional illumination for detailed visual inspection. In practical terms, the narrow bore concentrates the beam for clearer contrasts under microscopes and in assembly jigs, while the extended reach reduces the need for repositioning other equipment. This results in improved workflow efficiency and less handling time during fine inspection procedures. Controlled beam and improved visual clarity The combination of a fine‑bore output and single‑arm mounting translates into a narrow, controllable light cone that enhances surface detail and contrast. For microscopy and precision inspection, focused lighting reduces stray reflections and illuminates specific features without flooding the entire field of view. The flexible light guide transmits light from a remote source directly to the area of interest, which is particularly useful where space is limited or when working with sensitive samples that must not be heated by a lamp. The result is more repeatable visual assessments and fewer false rejections in quality checks. Integration, handling and reliability in the workshop The single‑arm, bendable construction eases installation on inspection benches and within microscope lighting rigs, permitting discreet routing around other instruments. The design supports quick repositioning and secure placement, reducing fiddly adjustments during measurement or assembly tasks. Built under the Euromex designation, the unit is suitable where concentrated, stable illumination is required and can be incorporated into standard microscopy and inspection setups. Enquiries about compatibility with specific lamp housings or mounting options can be directed to Metav Werkzeuge for technical clarification. Contact Metav Werkzeuge today for tailored advice on integrating the Euromex LE.5216 single‑arm flexible light guide into inspection or microscopy workflows — technical assistance and ordering support are available from Metav Werkzeuge in Emmerich. Technical data Article number: LE.5216 SKU: LE.5216 Manufacturer: Euromex Type: Light guide Dimensions / Performance Length: 100 cm Diameter: 4 mm Features Single‑arm flexible design Focused light delivery for microscopy and inspection Compact routing for confined spaces FAQ What applications suit this light guide best? The LE.5216 is well suited to microscopy, small‑part inspection and any task requiring a focused, stable light source in confined spaces. How does the 4 mm diameter affect illumination? A 4 mm bore produces a narrow, concentrated beam that enhances contrast and detail during close‑range inspection with microscopes or stereo microscopes. Can the LE.5216 be positioned permanently on an inspection bench? Yes, the single‑arm flexible construction allows secure placement and long‑term positioning where stable directional lighting is required. Is the LE.5216 compatible with standard illumination sources? Compatibility depends on the lamp housing and coupling; Metav Werkzeuge can provide specific advice on suitable light sources and adapters for the LE.5216. Does the flexible guide require special maintenance? Routine inspection for bends or kinks and gentle handling suffice; the design is intended for regular workshop use without complex servicing. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, high‑output illumination solution that combines 144 LEDs and a 6500 K daylight spectrum for precise, reproducible imaging; the adaptable mounting range (25–61 mm) and four separately switchable segments enable targeted shadow control. Order the LED ring light directly via Metav Werkzeuge or ask our consultants for application advice. LED-Ringlicht LE.1973 — LED ring light with segmented control and daylight spectrum by Euromex LED-Ringlicht LE.1973 provides uniform, high‑intensity ring illumination for inspection and microscopy applications, optimised for adjustable working distances and modular mounting. 144 LEDs, four switchable segments High intensity 23,000 lx at 100 mm Mounting diameter 25–61 mm Daylight colour temperature 6500 K Stable daylight illumination for reliable inspection results The LE.1973 delivers a 6500 K daylight spectrum with 23,000 lx at 100 mm, ensuring consistent colour rendition and high contrast for visual inspection and image capture. This stable colour temperature reduces calibration drift in camera systems and supports repeatable measurements, which is particularly relevant for quality assurance and documentation tasks. The concentrated light output is achieved by 144 LEDs arranged in a ring, producing even coverage while keeping heat generation low; this combination supports extended operation without affecting delicate specimens or instruments. Flexible mounting and directional lighting for task‑specific contrast Thanks to a mounting range of 25–61 mm and an outer diameter of 100 mm, the ring element integrates with common microscope objectives and laboratory holders. The lamp’s four separately switchable segments permit directional control of shadows and highlights, enabling quick adaptation from flat, even illumination to raking light for surface texture analysis. A working distance of 55–200 mm accommodates both close‑up detail inspection and slightly larger assemblies, allowing one lighting unit to serve multiple workflows without frequent repositioning. Efficient power supply and simple system integration The optical system runs at 4.5 W, achieving high luminous efficacy while drawing minimal energy; supply options 100–240 V AC; 12 V DC enable installation in global laboratory environments and compatibility with common microscope power supplies. The low power dissipation supports cooler operation and a long service life, which reduces maintenance intervals and total cost of ownership. Integration is straightforward: the compact ring form factor and standard mounting range permit quick assembly into inspection rigs or camera towers, and the segmented control is compatible with simple switch panels for on‑the‑fly adjustments. For reliable microscopy illumination and straightforward integration, contact Metav Werkzeuge to discuss the LE.1973 LED ring light or request tailored technical advice: Metav Werkzeuge GmbH, info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: LE.1973 SKU: LE.1973 Product type: LED ring light Manufacturer: Euromex Facts LEDs: 144 Illuminance: 23,000 lx at 100 mm Colour temperature: 6500 K Power consumption: 4.5 W Working distance: 55–200 mm Mounting diameter: 25–61 mm Outer diameter: 100 mm Power supply: 100–240 V AC; 12 V DC Special features Four separately switchable segments Uniform ring illumination Low heat generation Designed for microscopy and inspection FAQ Is the LE.1973 suitable for camera‑based inspection systems? Yes. The LE.1973 provides a stable 6500 K output and 23,000 lx at 100 mm, which supports consistent image capture and reduces the need for frequent white balance adjustments in camera‑based inspection setups. How is the ring light mounted to different objectives or holders? Mounting is possible via the adjustable diameter range of 25–61 mm, allowing the unit to be clamped or fitted to common microscope stands and custom inspection rigs without special adapters. Can the illumination be adjusted for contrast or texture inspection? Yes. The four separately switchable segments permit directional lighting control to emphasise surface features or produce even, shadow‑free illumination depending on the inspection task. What power options are available for the unit? The device accepts 100–240 V AC mains or 12 V DC, enabling use in varied laboratory and workshop environments and compatibility with standard microscope power supplies. Does the lamp run hot during extended use? The LED design offers high efficiency and low heat output; continuous operation is supported with minimal thermal impact on nearby samples or optics. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of uniform, high‑contrast illumination and a wide working range for reliable visual inspection. The compact design with 72 LEDs in four switchable segments and a 6500 K colour temperature enables precise, repeatable results; order directly via Metav Werkzeuge or consult our experts for integration advice. LED-Ringlight LE.1974 — LED ring light with 72 LEDs, 6500 K The LED-Ringlight LE.1974 is a dedicated LED ring light for microscopy and inspection tasks, providing segmented illumination and a flexible working distance for a variety of optical set-ups 72 LEDs, four switchable segments Working distance 50–180 mm Mounting diameter 25–61 mm 6500 K daylight colour temperature Consistent, shadow‑free illumination for accurate inspection A ring light delivers even lighting around the objective, reducing distracting shadows and reflections that can mask fine detail. The LE.1974 uses 72 LEDs arranged in a circular array with four separately switchable segments, which enables controlled directional lighting without mechanical repositioning. The 6500 K colour temperature gives a neutral, daylight‑balanced output that improves visual contrast and colour fidelity under magnification. For users inspecting components, solder joints or biological samples, this translates into faster detection of defects and fewer repeat inspections. Flexible working distance and mounting for diverse set-ups Precision inspection often requires adaptability: the LE.1974 supports a working distance of 50–180 mm, allowing close‑up illumination for high‑magnification optics as well as longer distances for larger assemblies. The ring fits a broad range of instrument interfaces thanks to its mounting diameter of 25–61 mm, so the same light can be integrated with stereomicroscopes, inspection cameras or borescopes. This flexibility reduces the need for multiple specialised lights and simplifies bench layout, supporting a more efficient workflow. Low power draw with robust supply options With a rated output of 4 W, the unit provides bright, efficient illumination while keeping thermal load minimal—important when delicate samples must not be warmed. Power compatibility is broad: 100–240 V AC mains or 12 V DC operation covers typical laboratory and portable installations. The modest energy use and long LED lifetime mean lower maintenance and steady luminance over time, which helps maintain consistent inspection conditions and reduces downtime. Practical design that supports repeatability and ergonomics An outer diameter of 100 mm offers a compact footprint while still ensuring a wide, even light field for most inspection objectives. The segmented control is particularly useful for highlighting surface topology or directing contrast to specific areas without additional accessories. Built as a purpose‑designed illumination solution, the ring light combines straightforward integration with measurable benefits: improved defect visibility and fewer ambiguous results, contributing to reproducible quality control outputs. For assistance integrating the Euromex LE.1974 LED ring light into a microscope or imaging chain, contact Metav Werkzeuge for product availability and tailored advice — call +49 2822 7131930 or write to info@metav-werkzeuge.com Technical data Article number: LE.1974 SKU: LE.1974 Manufacturer: Euromex Manufacturer article number: LE.1974 Product type: LED ring light Key specifications Outer diameter: 100 mm Working distance: 50–180 mm LEDs: 72 Power: 4 W Colour temperature: 6500 K Mounting diameter: 25–61 mm Power supply: 100–240 V AC; 12 V DC Materials & features LED ring light design Four separately switchable segments Neutral daylight output Compact form factor Image: https://plytix-files.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/1c/a5/f1/6a/6af1a51cd8ecf2f60acae072/LE.1974.jpg FAQ How does the segmented lighting improve visual inspection? Segmented control lets the operator switch individual LED sectors on or off to create contrast from different angles; with the Euromex LE.1974 ring light this simplifies highlighting surface features without moving the sample. Is the ring light compatible with common microscope objectives? Yes. The LE.1974 supports a mounting diameter of 25–61 mm, which covers many standard objective holders and adaptor rings used in stereomicroscopes and inspection cameras. What working distances are possible for close‑up and larger samples? The unit provides a working distance range of 50–180 mm, allowing both close‑focus illumination and lighting for larger assemblies while maintaining even coverage. Can the light run on portable power supplies? The LE.1974 accepts 12 V DC in addition to 100–240 V AC, enabling use with suitable portable or bench power supplies where mains access is limited. Will the colour temperature affect image capture for documentation? The 6500 K daylight balanced output of the Euromex ring light is suitable for consistent documentation and colour rendering, reducing the need for software colour correction in many imaging scenarios. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of high‑intensity 100 W halogen illumination, a compact form factor and versatile power options to secure consistent, reproducible lighting for microscopy tasks; order the cold light source LE.5210 directly via Metav Werkzeuge or consult the technical team for suitability and delivery. Cold light source LE.5210 — 100 W halogen, 20,000 lx output (with LE.5214) The cold light source LE.5210 is a compact illumination unit designed for microscopy accessories and inspection stations where stable, high‑contrast lighting is required 100 W halogen lamp, cold light source 20,000 lx with LE.5214 light guide Compatible with 110/230 V AC and 12 V DC Requires separate light guide and accessories Consistent, high‑contrast illumination for inspection and documentation The unit delivers 100 W halogen output and achieves up to 20,000 lx when paired with the designated LE.5214 light guide, providing a level of brightness that supports clear, high‑resolution observation and photography. The 3000 K colour temperature produces a natural, warm white tone that helps to reveal surface detail and true colours without excessive heat at the specimen plane. Because the illumination is generated centrally and transmitted through a light guide, the arrangement reduces local heating at the workpiece while maintaining luminous intensity, which is especially beneficial for heat‑sensitive samples and long inspection cycles. Flexible installation and reliable performance across work environments With selectable supply voltages (110/230 V AC and 12 V DC) and a compact footprint of 115 x 320 x 215 mm (H x W x D), the unit integrates easily into laboratory benches, inspection stands and portable rigs. The modest weight of 3.8 kg allows relocation between workstations where needed, while the dual‑voltage capability supports international use without the need for additional converters. These design choices translate into operational flexibility and reduced downtime during equipment changes or reorganisation of production cells, ensuring consistent lighting standards across multiple sites. Clear accessory concept and straightforward maintenance planning The illumination system is intended to be used with separate light guides and a range of focusing heads and filters; models such as LE.5213, LE.5214, LE.5216, LE.5222, LE.5224, LE.5228 and LE.5231 require a suitable light guide for correct operation. Spare lamps SL.5219 and SL.5230 are listed for replacement, allowing predictable maintenance cycles and fast restoration of full luminous output. This modular approach simplifies inventory planning and ensures that optical accessories and consumables can be replenished without replacing the core illumination unit, supporting long‑term cost efficiency and uninterrupted inspection quality for laboratories and workshops using the LE.5210. Contact Metav Werkzeuge for a technical consultation on integrating the Euromex LE.5210 into existing inspection setups and to arrange procurement directly from Emmerich; eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 Technical data Article number: LE.5210 SKU: LE.5210 Manufacturer: Euromex Facts Lamp power: 100 W Illuminance: 20,000 lx (with LE.5214) Colour temperature: 3000 K Dimensions: 115 x 320 x 215 mm (H x W x D) Weight: 3.8 kg Supply voltage: 110 or 230 V AC; 12 V DC Special features Cold light source design Light guide required for focusing heads and filters Compatible accessory references: LE.5213, LE.5214, LE.5216, LE.5222, LE.5224, LE.5228, LE.5231 Spare lamps: SL.5219, SL.5230 FAQ Is a light guide included with the unit? The cold light source LE.5210 is supplied without a light guide; a suitable light guide (for example LE.5214 for maximum illuminance) must be purchased separately. Which power supplies are supported? The unit accepts 110 or 230 V AC and 12 V DC, enabling use in different regions and with mobile power sources where DC operation is required. Are replacement lamps available? Yes, spare lamps SL.5219 and SL.5230 are listed as replacements to allow planned maintenance and quick restoration of full luminous output. Can the unit be used with focusing heads and filters? Focusing heads and filters such as the LE.5213, LE.5216 and others require a suitable light guide to function correctly with the illumination unit. Is the colour temperature suitable for photographic documentation? The 3000 K output provides a warm white tone that is stable and consistent, supporting colour‑accurate documentation under controlled imaging conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of long-life illumination and a standard MR16 form factor to reduce downtime and simplify maintenance in microscopy setups; compatible with LE.5210 and supplied under the Euromex label. Order the replacement lamp directly via Metav Werkzeuge or ask our consultants for compatibility advice. Halogen replacement lamp 12 V, 100 W, MR16 SL.5230 – Microscope replacement lamp by Euromex, Long Life A halogen replacement lamp 12 V, 100 W, MR16 SL.5230 that provides a purpose-built, long-life illumination solution for LE.5210 microscopes Long-life halogen performance 12 V, 100 W rated power MR16 form factor for focused light Compatible with LE.5210 microscope Consistent illumination that keeps workflows moving The 12 V / 100 W halogen unit offers stable, continuous lighting that supports repeatable inspection results. Because the lamp is specified as Long Life, replacement intervals are extended, which reduces interruptions in production or laboratory work. The compact MR16 format provides controlled beam geometry suitable for focused specimen illumination, helping to preserve optical alignment and minimise time spent on readjustment after replacement. Built for microscope integration and straightforward servicing Designed as a microscope replacement lamp, the SL.5230 fits the LE.5210's illumination module without the need for additional adaptors. The MR16 base simplifies mounting and ensures consistent optical position, so maintenance routines remain fast and predictable. This replacement lamp reduces service complexity and supports efficient asset management in workshop and laboratory environments. Clear technical fit for illumination tasks The MR16 designation refers to the lamp’s reflector-style envelope, which concentrates light into a defined beam useful for magnified observation. The halogen technology in this unit provides a continuous spectral output that is well suited to applications requiring stable contrast and colour rendition. Compatibility with the LE.5210 ensures mechanical and electrical matching, so the lamp functions as intended within the existing illumination system. Long-life choice for dependable results and lower handling frequency Choosing a long-life halogen lamp supports operational continuity: fewer replacements mean fewer handling incidents and a lower administrative load for maintenance scheduling. For facilities seeking reliable spares management, stocking this Euromex replacement reduces the risk of unexpected downtime. If further technical data or assistance is required to confirm suitability for a specific setup, the Metav team is available to provide guidance by e‑mail or phone. For reliable long-life microscope illumination, contact Metav Werkzeuge to secure the Euromex SL.5230 replacement lamp and confirm compatibility with LE.5210; e‑mail info@metav-werkzeuge.com or call +49 2822 7131930 to consult our specialists Technical data Article number: SL.5230 SKU: SL.5230 Manufacturer: Euromex Product type: Microscope replacement lamp Specifications Voltage: 12 V Power: 100 W Lamp base/format: MR16 Features Long Life Compatible with LE.5210 Halogen technology FAQ Is this lamp compatible with LE.5210 microscopes? The SL.5230 is specified for use with the LE.5210 and is supplied in the MR16 format to match that illumination module. How does the MR16 format affect installation? The MR16 reflector format secures the optical position and simplifies mounting, so installation of the SL.5230 into the LE.5210 is straightforward and repeatable. What operational benefits does a Long Life version provide? A Long Life halogen lamp reduces the frequency of replacements, cutting maintenance time and lowering the risk of workflow interruptions when using the SL.5230. Which technology is used in this replacement lamp? The SL.5230 uses halogen illumination in an MR16 envelope, providing continuous spectral output suitable for microscopy illumination tasks. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a high‑intensity daylight output, low power consumption and compact design for consistent inspection results; order the unit directly via Metav Werkzeuge or request tailored advice from our consultants. LE.5211-LED LED cold light source – 30 W LED (equivalent to 120 W halogen), 30,000 lx, 6500 K (Euromex) The LE.5211-LED provides focused, daylight‑balanced illumination for microscopy and precision inspection, ideal for laboratory benches and production inspection stations. 30 W LED, equivalent to 120 W halogen 30,000 lx peak illuminance 6500 K daylight colour temperature Compact 150 x 150 x 230 mm footprint High‑fidelity illumination for accurate visual inspection A stable, daylight‑balanced light source supports reliable visual assessment and image capture. The 30 W LED design delivers an intense 30,000 lx at the focal output while consuming markedly less energy than comparable halogen units; the result is consistent contrast and colour rendering at 6500 K, which helps to reduce interpretation errors in quality control. Thanks to the cold‑light principle, thermal load on specimens is minimised, which preserves sensitive samples and prevents heat‑induced measurement drift. This clarity supports process decisions based on visual evidence rather than guesswork. Compact, flexible power and straightforward integration The unit is designed for tight workspaces: at 150 x 150 x 230 mm and a weight of 2.8 kg, the housing is portable yet stable on a bench. Dual supply options (230 V AC; 12 V DC) enable connection in laboratory and production environments, and the compact footprint simplifies retrofitting into existing inspection rigs. Note that a separate light guide is required for delivery of light to the inspection point; this approach allows individual selection of light guides to match optical accessory heads and focal lengths for different applications, making the source adaptable rather than prescriptive. Industrial compatibility, serviceability and application scope Built to serve microscopy and precision inspection workflows, the light source is compatible with a range of focusing heads and filters that require a suitable light guide. The design balances durability with serviceability so maintenance schedules remain predictable. For tasks from material inspection to assembly control, the unit offers repeatable illumination conditions that enhance measurement confidence. If supplementary technical details are needed to confirm suitability for a specific setup, Metav Werkzeuge can provide guidance and support, including accessory compatibility and delivery from stock in Emmerich. Contact Metav Werkzeuge for personalised configuration advice and to order the Euromex LE.5211-LED directly from our Emmerich warehouse — telephone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data SKU: LE.5211-LED Manufacturer item no.: LE.5211-LED Brand: Euromex Product type: LED cold light source Facts Power: 30 W LED (catalogue equivalent to 120 W halogen) Illuminance: 30,000 lx Colour temperature: 6500 K Supply voltage: 230 V AC; 12 V DC Weight: 2.8 kg Dimensions (H x W x D): 150 x 150 x 230 mm Special features LED cold light source Light guide required for focusing heads and filters Accessories requiring suitable light guide: LE.5213, LE.5214, LE.5216, LE.5222, LE.5224, LE.5228, LE.5231 FAQ Is a light guide included with the unit? No, a light guide is not included; the LE.5211-LED requires a separate light guide for connection to focusing heads and filters. What are the electrical supply options? The LE.5211-LED supports 230 V AC and 12 V DC input voltages for flexible installation in laboratory and production environments. How bright is the light output compared with halogen lamps? The 30 W LED of the LE.5211-LED is specified as equivalent to a 120 W halogen source and is rated for approximately 30,000 lx at the output. Which applications suit this light source best? The unit is suitable for microscopy, visual inspection, quality control and other tasks requiring stable, daylight‑balanced illumination. Are specific accessories required for certain focussing heads? Yes; several focussing heads and filters listed for this range require a compatible light guide to operate correctly with the LE.5211-LED. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of improved illumination control and straightforward integration: the combination of an aspherical optical element and dedicated mounting compatibility ensures sharper focus and reduced aberration in light-guide assemblies. Order the component directly via Metav Werkzeuge or consult their specialists for integration advice. LE.5224 Aspherical focusing lens — Light‑guide focusing accessory, compatible with LE.5222 / LE.5228 LE.5224 is an aspherical focusing lens designed for precise light management in laboratory illumination and inspection assemblies, compatible with selected Euromex light‑guide housings Aspherical optical design for sharper focus Compatible with LE.5222 and LE.5228 mounts Fits LE.5213, LE.5214 and LE.5215 housings Precision accessory for light‑guide systems Sharper illumination with reduced optical aberration The aspherical lens element provides a measurable improvement in beam shaping compared with simple spherical optics, leading to reduced spherical aberration and a more uniform spot profile. For inspection tasks that require consistent illumination, this translates into clearer contrast and fewer artefacts in the field of view. The component is presented as a compact light‑guide focusing accessory that improves the effective illumination quality without altering the existing light source, enabling a technical upgrade of the optical path with minimal system change. Designed for direct integration into established housings Compatibility with the LE.5222 and LE.5228 mounting carriers allows straightforward retrofitting into assemblies based on the LE.5213, LE.5214 and LE.5215 housings. This direct fit minimises assembly time and avoids custom adapters, which reduces installation complexity and downtime. By matching mechanical interfaces and optical alignment, the accessory supports consistent repeatability in set‑ups used in microscopy‑grade illumination and workshop inspection stations. Practical benefits for workflow and maintenance As a small, dedicated focusing accessory, the lens delivers a targeted upgrade path for systems that demand improved illumination control while keeping maintenance effort low. The design supports predictable optical behaviour across repeated insertions and removals, helping to maintain process stability in production or laboratory environments. Where specifications for material or coating are not listed, the component should be treated as an optical upgrade element to be combined with the existing Euromex light‑guide assembly and checked within the actual application for compatibility. For integration support or to discuss suitable configurations with the LE.5224 aspherical focusing lens, contact Metav Werkzeuge for expert advice and local supply from Emmerich Technical Data Article number: LE.5224 SKU: LE.5224 Manufacturer: Euromex Product type: Light guide focusing accessory Facts Image file size: 56795 Special features Aspherical focusing lens Mounting in LE.5222 or LE.5228 For use on LE.5213, LE.5214 and LE.5215 Category: Microscopy accessories → Illumination → Accessory Gallery image available (LE.5224.jpg) FAQ What improvement does an aspherical focusing lens provide? An aspherical focusing lens reduces spherical aberration and produces a more uniform illumination spot; the LE.5224 therefore yields clearer, more consistent lighting for inspection tasks. Which housings and mounts are supported? The accessory is specified for installation in LE.5222 or LE.5228 mounts and is intended for use on LE.5213, LE.5214 and LE.5215 housings. Is the material or coating specified for this lens? No material or coating details are provided in the available data for the LE.5224; users should assume unspecified optics and verify compatibility in their own application. Can the lens be retrofitted into existing Euromex light‑guide assemblies? Yes, the LE.5224 is designed as a retrofit focusing accessory for compatible Euromex mounts and housings, enabling upgrades without major system changes. Is technical support available for integration? Integration guidance is available from Metav Werkzeuge, who can advise on using the LE.5224 within existing inspection and illumination set‑ups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of high-intensity illumination, compact design and flexible power options to bring reliable microscopy lighting into the workshop or laboratory. The combination of 150 W halogen output, a 3000 K colour temperature and the option to reach 21,000 lx with the LE.5214 light guide supports precise visual inspection and imaging; order the Cold light source LE.5211 directly via Metav Werkzeuge or ask our consultants if needed. Cold light source LE.5211 – 150 W halogen, 3000 K (Euromex) The Cold light source LE.5211 is a compact halogen illumination unit for microscopy and inspection tasks, designed to supply steady, high-intensity light via a separate light guide for sensitive specimen work. 150 W halogen cold light source 3000 K colour temperature 21,000 lx with LE.5214 light guide Compact 150 x 150 x 230 mm footprint High-intensity, consistent illumination for precise inspection The unit delivers 150 W halogen output that, when combined with a suitable light guide, provides bright, uniform lighting essential for accurate visual inspection and documentation. With a measured 21,000 lx available using the LE.5214 guide, the lamp supports tasks that demand fine contrast and detail recognition. The halogen source is specified as a cold light source, meaning the light is transmitted through a fibre optic guide so that the illuminated area remains cool; this benefits temperature-sensitive samples and components while maintaining image clarity. The design prioritises dependable luminous flux for routine microscope work or inspection stations where steady, shadow-free illumination is required. Compact format and flexible power for easy integration Measuring 150 x 150 x 230 mm, the housing takes up little bench or rack space and weighs only 3.9 kg, allowing straightforward placement near microscopes or inspection rigs. The unit accepts 230 V AC mains and provides a 15 V DC output option, making it adaptable to different system setups and reducing the need for additional converters. Accessories such as focussing heads and filters require an appropriate light guide; compatibility with LE.5213, LE.5214, LE.5216, LE.5222, LE.5224, LE.5228 and LE.5231 ensures that the lamp can be configured precisely for the required beam shape and working distance. This compact and flexible configuration helps to keep workstations organised without compromising illumination performance. Built for dependable everyday use with straightforward maintenance The lamp is supplied as a cold light source with recognised Euromex engineering, offering a practical balance of brightness and usability for laboratory or workshop environments. The colour rendering at 3000 K provides a warm, consistent tone suitable for inspection and documentation under typical microscopy conditions. Replaceable spare lamps (SL.5235, SL.5240) are available, supporting continuity of operation and simplifying maintenance planning. Clear specification of power and dimensions allows planners to integrate the unit into measurement benches and inspection systems with confidence, while the need to purchase a compatible light guide separately offers configurability to match specific optical setups. For detailed configuration advice or to discuss which light guide suits the application, contact Metav Werkzeuge for tailored guidance on the Euromex Cold light source LE.5211 — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a consultation and next steps. Technical Data Article number: LE.5211 SKU: LE.5211 Manufacturer: Euromex Product type: Cold light source Power supply: 230 V AC; 15 V DC Facts Power: 150 W halogen Weight: 3.9 kg Dimensions: 150 x 150 x 230 mm (H x W x D) Colour temperature: 3000 K Illuminance: 21,000 lx with LE.5214 Special features Light guide required separately Compatible with LE.5213, LE.5214, LE.5216, LE.5222, LE.5224, LE.5228, LE.5231 Spare lamps: SL.5235, SL.5240 Cold light source for microscopy illumination FAQ What illumination level can be expected with the unit? The unit achieves up to 21,000 lx when used with the LE.5214 light guide; actual illuminance depends on the chosen light guide and focussing head. Is a light guide included with the lamp? No, a light guide is not included; the cold light source requires a separate guide such as LE.5214 to deliver light to the work area. Which power connections does the unit accept? The cold light source operates from 230 V AC mains and provides a 15 V DC option as specified for integration. Are spare lamps available for continued operation? Yes, compatible spare lamps are listed as SL.5235 and SL.5240 to support maintenance and minimise downtime. Can this lamp be used for temperature-sensitive specimens? Yes, as a cold light source the illumination is transmitted via a light guide so that the specimen area remains comparatively cool. Manufacturer: Metav IndustryLine / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of directional illumination and low-heat LED output for repeatable, high-contrast inspections; compatibility with the MZ.4705 ensures immediate integration. Order the unit directly via Metav Werkzeuge or consult the technical team for application guidance. MZ.4735 Directional 12 x 1 W LED Ring Light by Euromex MZ.4735 is a directional ring light designed to deliver controlled, low-heat illumination for the MZ.4705 microscope, optimised for fine inspection and digital imaging tasks Directional 12 x 1 W LEDs Compatible with MZ.4705 microscope Uniform illumination for inspection Low-heat LED modules for sensitive samples Improve measurement and inspection reliability with targeted light The directional arrangement of 12 x 1 W LEDs provides a focused beam that reduces stray reflections and reveals surface detail more reliably than diffuse sources. For inspection tasks where contrast and shadow control matter, the ring illumination unit delivers consistent results across the field of view. The compact lighting assembly is engineered to match the optical path of the referenced microscope, enabling stable imaging and fewer retakes during quality assurance or documentation workflows. This translates into measurable time savings and fewer false rejections in routine checks. Energy-efficient operation and thermal benefits for sensitive samples Built on modern LED technology, the lamp achieves high luminous output with modest electrical demand. Each 1 W emitter contributes to a total nominal output sufficient for most stereomicroscopy and digital documentation applications, while maintaining a low-heat profile that helps protect heat-sensitive specimens and avoids sample dehydration. The reduced thermal load also lessens strain on delicate optical components during prolonged use, which supports longer service intervals and predictable performance under continuous operation. The combination of efficiency and thermal control supports both laboratory and production-floor environments. Seamless integration and practical handling for routine use Designed as a microscope lighting accessory in the ring lights category, this illumination module installs cleanly on the compatible head of the MZ.4705, ensuring repeatable alignment and minimal setup time. Cable routing and the compact form factor are intended to fit into existing inspection stations or imaging rigs without major adaptation. For maintenance, the LED array requires significantly less attention than conventional lamps, lowering downtime and simplifying inventory for spare parts. The Euromex ring lamp is therefore a practical choice where consistent visualisation and operational availability are priorities. Contact Metav Werkzeuge for application advice or to confirm compatibility with specific inspection setups and microscope models; their specialists can provide technical clarification and order support for this Euromex lighting solution. Technical Data Article number: MZ.4735 SKU: MZ.4735 Brand: Euromex Product type: Microscope lighting Category path: Microscopy accessories > Illumination > Ring lights Facts Light source: 12 x 1 W LEDs Total nominal power: 12 W Compatibility: Designed for MZ.4705 Special features Directional LED arrangement Low-heat operation Designed for inspection and imaging Image resource: MZ.4735.jpg FAQ What microscopes is this ring light compatible with? The MZ.4735 ring light is designed for compatibility with the MZ.4705 microscope and aligns with the optical requirements of that model. How much power does the lighting unit consume? The lamp comprises 12 x 1 W LEDs, giving a total nominal power of 12 W as specified for the MZ.4735 microscope lighting accessory. Is the LED output suitable for imaging and documentation? Yes; the directional LED arrangement of the MZ.4735 delivers controlled illumination that improves contrast for imaging and digital documentation tasks. Does the lamp generate a lot of heat during use? The Euromex ring light is specified for low-heat operation, making it suitable for work with heat-sensitive specimens and prolonged inspection sessions. Are spare parts or replacements available for the LEDs? Replacement policies and spare components vary by supplier; the MZ.4735 uses standard LED modules and enquiries can be directed to the vendor for service options. Can this illumination unit be used for stereomicroscopy and simple macro inspection? The directional design and uniform coverage of the MZ.4735 make it appropriate for stereomicroscopy and macro inspection where shadow control and surface detail are important. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Data inconsistency detected: the manufacturer "Euromex" in the product data is not listed in the provided manufacturer directory; generation of the full product description is therefore not possible, as the absence of a matching entry in the directory prevents the system from verifying the manufacturer details, which are essential for accurately compiling and validating the product description, ensuring it meets the required standards and aligns with the database's integrity rules, thereby avoiding potential errors or discrepancies in the final output that could arise from incomplete or unverified manufacturer information, which is a critical component of the product description process.

Take advantage of a modular lighting concept, high‑intensity ring illumination and flexible gooseneck spotlights for consistent sample visualisation in routine inspection or documentation; order the unit directly via Metav Werkzeuge or consult their specialists for configuration advice. Modular Illumination Station LE.5212-420 — Microscope lighting station with 60‑LED ringlight and flexible gooseneck arms (Euromex) The Modular Illumination Station LE.5212-420 is an adaptable cold‑light solution for microscopy and workstation inspection, suitable for standalone use or for mounting on microscope columns. Modular mounting up to Ø44 mm 60‑LED ringlight, 24,000 lx, 6,500 K Two 56 cm gooseneck spotlights (420 nm) Adapter rings 35 mm and 25 mm Precise, high‑contrast illumination for reliable inspection The modular design provides concentrated, adjustable light where it is needed, making visual inspection and photographic documentation more reliable. The central LED ringlight delivers 24,000 lx at 6,500 K using 60 LEDs, producing even, shadow‑free top illumination that improves contrast on textured or reflective samples. For thin or translucent specimens, the dedicated transmitted light module offers 8,000 lx from 42 LEDs and a solid light plate (Ø 94.5 mm, 15 mm thick) to ensure uniform backlighting. These specifications help standardise workflow outcomes and reduce rework caused by poor visibility. Flexible positioning and secure mounting for varied workflows Flexible gooseneck arms (56 cm) with a focusing head containing three lenses enable targeted accent lighting and easy focusing on small details. The station can be used independently or attached to microscope posts up to Ø 44 mm, while the ringlight accepts a mounting diameter of 21–61 mm; adapter rings (35 mm and 25 mm) expand compatibility with a wide range of objectives and camera adapters. This combination of reach and secure attachment reduces setup time and supports consistent repeatability in production, inspection and laboratory environments. Modular accessories and simple adaptation to applications The unit’s modular architecture allows the exchange of light arms and the addition of a screw‑on polarisation filter, increasing control over glare and reflections on shiny surfaces. Interchangeable accessories (LE.5260–LE.5264) extend functionality without requiring a complete replacement, supporting a long service life and predictable upgrade paths. As a compact lighting station, it supports diverse tasks from routine quality checks to documentation, while maintaining an ergonomic footprint on the workbench. Contact Metav Werkzeuge for tailored configuration advice and rapid supply of the LE.5212-420 from Emmerich’s central quality hub Technical Data Article number: LE.5212-420 SKU: LE.5212-420 Brand: Euromex Product type: Microscope lighting station Core technical data 2 x 3 W gooseneck illumination, 420 nm 4 W LED ringlight 2 W LED transmitted light Ringlight: 60 LEDs, 6,500 K, 24,000 lx, mounting Ø 21–61 mm Transmitted light: 42 LEDs, 6,500 K, 8,000 lx; light plate Ø 94.5 mm, 15 mm thick Gooseneck arms: 56 cm; focusing head with three lenses Mounting: for microscope posts up to Ø 44 mm; adapter rings 35 mm, 25 mm Special features Modular design for standalone use or column mounting Interchangeable light arms and screw‑on polarisation filter (LE.5260–LE.5264) Adapter rings for expanded compatibility Suited to inspection, documentation and sample preparation FAQ What mounting options are available for the station? The LE.5212-420 supports standalone use or mounting on microscope posts up to Ø 44 mm and accepts a ringlight mounting diameter of 21–61 mm; adapter rings 35 mm and 25 mm are included. What are the light intensity and colour temperature of the ringlight? The Euromex ringlight provides 24,000 lx at a colour temperature of 6,500 K using 60 LEDs for balanced, daylight‑neutral illumination. Can polarisation be added to reduce reflections? Yes — the modular design accepts a screw‑on polarisation filter and interchangeable light arms; compatible accessories include LE.5260 to LE.5264. Is the station suitable for transmitted‑light applications? The unit includes a transmitted light module with 42 LEDs, 6,500 K and approximately 8,000 lx, plus a robust light plate (Ø 94.5 mm, 15 mm thick) for uniform backlighting. Are the gooseneck arms adjustable for precise positioning? The gooseneck arms measure 56 cm and feature a focusing head with three lenses, allowing targeted, stable positioning for close‑up work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the modular design and high‑output LED illumination to ensure consistent, daylight‑balanced lighting for inspection tasks; the combination of adjustable goose‑neck arms, a powerful 60‑LED ringlight and a dedicated transmitted light plate supports both surface and translucent samples. Order directly via Metav Werkzeuge or consult our technical advisers for mounting options and accessory selection. Modular Illumination Station LE.5212 — Modular microscope lighting with goose‑neck arms and 60‑LED ringlight (Euromex) A Modular Illumination Station LE.5212 designed for standalone use or secure mounting on microscope columns up to Ø 44 mm, offering versatile illumination options for laboratory inspection, assembly and quality control. Modular mounting for microscope columns Ø 44 mm Two 56 cm goose‑neck arms with focus head 60‑LED ringlight: 24,000 lx at 6,500 K Transmitted light plate Ø 94.5 mm, 8,000 lx Consistent, daylight‑balanced illumination for reliable inspection The lighting module delivers a balanced 6500 K white light spectrum, chosen to approximate daylight and improve colour rendition during visual inspection and imaging. With a 60‑LED ringlight producing up to 24,000 lx, reflected details become clearer and contrasts are enhanced, reducing the need for repeated adjustments. The station is therefore suited to tasks where colour accuracy and repeatability matter, such as electronics inspection, materials analysis or precision assembly. The integrated transmitted light option, rated at 8,000 lx, supports examination of semi‑transparent specimens and thin sections, offering a versatile lighting setup in one compact unit. Flexible positioning and precise beam control for ergonomic workflows Two flexible goose‑neck arms of 56 cm length combine reach with stability, allowing the light heads to be positioned precisely without tools. The focus head with three lenses enables targeted control of beam sharpness and spot size, which helps to isolate critical areas without creating distracting glare on surrounding surfaces. This ergonomic flexibility reduces operator fatigue and shortens setup time, making the unit valuable for repetitive inspection cycles or workstation sharing where quick reconfiguration is required. Modular mounting and straightforward integration into existing equipment Designed for mounting on microscope columns with a maximum diameter of Ø 44 mm, the station includes adapter rings (35 mm and 25 mm) for compatibility with a broad range of stands. The option to use the system either standalone or fixed to a post means it integrates neatly into both bench‑top and column‑based setups. For facilities aiming to centralise equipment without replacing existing microscopes, this modular approach minimises downtime and supports incremental upgrades while preserving previous investments. Expandable accessories for reflection control and enhanced contrast Optional accessories (LE.5260–LE.5264) include interchangeable light arms and screw‑on polarisation filters, giving control over reflections and surface glare where needed. The ringlight’s mounting diameter range of 21–61 mm supports a variety of objective and camera housings, while the robust light plate (Ø 94.5 mm, 15 mm thick) provides an even base for transmitted illumination. These options make the lighting module future‑proof for evolving inspection requirements and allow optimisation for specific materials or surface finishes. For tailored advice on mounting the Euromex LE.5212 and compatible accessories, contact Metav Werkzeuge for direct supply and technical support from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: LE.5212 SKU: LE.5212 Brand: Euromex Product type: Microscope illumination station Core specifications Goose‑neck lighting: 2 × 3 W, white light 6500 K Ringlight: 4 W, 60 LEDs, 6500 K, 24,000 lx Transmitted light: 2 W, 42 LEDs, 6500 K, 8,000 lx Ringlight mounting diameter: 21–61 mm Light plate: Ø 94.5 mm, 15 mm thick Goose‑neck arm length: 56 cm Special features Modular for standalone use or mounting on microscope columns up to Ø 44 mm Adapter rings: 35 mm and 25 mm Focus head with three lenses Accessories LE.5260–LE.5264: interchangeable arms / screw‑on polarisation filter Suitable for reflected and transmitted illumination workflows FAQ What mounting options are available for the LE.5212? The Euromex LE.5212 can be used standalone or mounted on microscope columns up to Ø 44 mm; adapter rings of 35 mm and 25 mm are included for additional compatibility. How bright is the ringlight and what colour is the light? The ringlight delivers up to 24,000 lx at a colour temperature of 6500 K, providing a cool, daylight‑balanced illumination ideal for accurate colour assessment. Can the station be adjusted for fine‑detail work? Yes, the two 56 cm goose‑neck arms and the focus head with three lenses allow precise positioning and beam focusing to highlight small features without disturbing adjacent areas. Are there options to reduce reflections on shiny samples? Interchangeable accessories (LE.5260–LE.5264) include screw‑on polarisation filters, which can significantly reduce surface reflections and improve contrast on reflective materials. Is the unit suitable for both surface inspection and thin specimens? The combination of reflected lighting (ring and goose‑necks) and a transmitted light plate (Ø 94.5 mm, 8,000 lx) supports inspection of opaque surfaces and semi‑transparent samples alike. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a simple, purpose-built 3 W NeoLED™ replacement unit that restores reliable illumination quickly and keeps instruments available for teaching and routine analyses; order replacement lighting directly via Metav Werkzeuge or consult the team for compatibility advice. BioBlue.Lab BB.9993 — 3 W NeoLED™ replacement light unit (Euromex) The BioBlue.Lab BB.9993 is a dedicated replacement illumination module for laboratory microscopes, designed for educational and life science applications. 3 W NeoLED™ replacement unit Compact LED module for microscope lighting Compatible with BioBlue.Lab series by Euromex Maintain steady illumination for uninterrupted lab work The 3 W NeoLED™ replacement unit is intended to re-establish consistent microscope lighting rapidly after a lamp failure or during scheduled maintenance. As a direct replacement module, it restores the illumination path without the need to change optical settings, which supports ongoing laboratory workflows. The feature set focuses on fit and function: the module is listed for education and life science microscope use, where predictability and quick exchangeability help reduce instrument downtime and preserve scheduled teaching and analysis sessions. Clear identification and straightforward compatibility Identification of the correct module is simplified by the model and SKU information: BB.9993 refers to the specified replacement for the BioBlue.Lab range by Euromex. The entry is supplied as a replacement illumination component intended for the BioBlue.Lab series, which aids procurement and inventory management. Listing the module alongside the microscope model reduces uncertainty during ordering and ensures that workshop stores and instrument managers can match spare parts to the correct instrument family with confidence. Practical benefits for workshops and teaching environments Having a designated replacement light module on hand supports operational continuity in teaching laboratories and routine microscopy environments. The replacement unit functions as a direct substitute for the original light source, enabling a rapid return to normal operation and minimising interruptions to curricula or sample processing. For purchasing departments and technical staff, the module provides a targeted spare part solution that aligns with the BioBlue.Lab product family, simplifying stock planning and maintenance procedures. Contact Metav Werkzeuge GmbH in Emmerich for availability of Euromex replacement modules such as the BioBlue.Lab BB.9993 and for expert guidance on matching the correct illumination unit to the instrument in use: +49 2822 7131930 / info@metav-werkzeuge.com Technical Data Article number: BB.9993 SKU: BB.9993 Manufacturer: Euromex Model series: BioBlue.Lab Product type: Microscope replacement illumination Specifications Power: 3 W NeoLED™ Special features NeoLED™ replacement technology Compatible with BioBlue.Lab microscopes Category: Illumination / Light source Label: Mikroskop-Ersatzbeleuchtung BioBlue.Lab BB.9993 FAQ What is the BB.9993 replacement module designed for? The BioBlue.Lab BB.9993 is a 3 W NeoLED™ replacement unit intended to restore the illumination of Euromex BioBlue.Lab microscopes used in education and life science settings. How is the replacement identified for ordering? Identification is by model and SKU: the module is listed as BB.9993 for the BioBlue.Lab series from Euromex, simplifying procurement and stock management. Does this module fit BioBlue.Lab microscopes only? The module is specified for the BioBlue.Lab series; compatibility with other Euromex models should be verified against model documentation before ordering. What technical designation should be referenced when requesting this spare part? Reference the 3 W NeoLED™ designation together with the SKU BB.9993 and the BioBlue.Lab series to ensure the correct replacement module is supplied. Can this replacement unit be used in teaching laboratories? Yes, the BioBlue.Lab BB.9993 is listed for education and life science microscope use, making it suitable as a spare part for teaching environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise 365 nm UV illumination, an interchangeable self-supporting gooseneck, and straightforward compatibility with common Euromex illumination bases for reliable inspection workflows. Order this component directly via Metav Werkzeuge or consult the Metav team for application advice. LE.5261 Interchangeable Gooseneck Light Guide — 365 nm high‑power UV LED, Euromex light guide An LE.5261 is an interchangeable, self-supporting gooseneck light guide fitted with a 365 nm high‑power UV LED, designed for dedicated microscopy illumination with NZ.9018, LE.5207 and LE.5212 bases. 365 nm high‑power UV LED Interchangeable self-supporting gooseneck *Compatible with NZ.9018, LE.5207, LE.5212 *Current plug version included Improved contrast for demanding inspection tasks The 365 nm wavelength from the integrated UV LED produces targeted ultraviolet illumination that enhances contrast in fluorescence-sensitive inspections and detail work. The concentrated spectral output makes it easier to detect faint fluorescence or surface features that are not visible under white light, supporting reliable visual assessment in microscopy applications. This intensity is supplied in a compact module that integrates neatly with existing illumination ports. Stable positioning for repeatable results The self-supporting gooseneck offers flexible yet stable alignment, allowing the light to be positioned precisely over the inspection area and to hold that position without external clamps. The interchangeable design reduces downtime by enabling quick swaps between compatible illumination bases; maintenance and set-up are therefore faster and more predictable. This mechanical stability contributes directly to consistent imaging and easier repeat measurements in daily operation. Seamless integration and practical supply Designed for direct compatibility with Euromex bases NZ.9018, LE.5207 and LE.5212, the module simplifies procurement and inventory by aligning with established illumination systems. The product is supplied as a single unit in the current plug version and is intended for immediate replacement or upgrade of existing light guides. The compact format supports clutter-free bench layouts while preserving the optical path required for precise microscopy work. For precise UV illumination and fast replacement parts, contact Metav Werkzeuge in Emmerich for delivery and technical advice on the Euromex LE.5261; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: LE.5261 Manufacturer: Euromex Product type: Light guide Packaging unit: 1 piece Core data Wavelength: 365 nm Pack size: 1 piece Special features Interchangeable, self-supporting gooseneck High‑power 365 nm UV LED Compatibility with NZ.9018, LE.5207, LE.5212 Current plug version FAQ Is this light guide compatible with older Euromex illumination bases? The LE.5261 is specified for use with Euromex NZ.9018, LE.5207 and LE.5212 bases; compatibility with other or older bases should be verified against the base connector and power specifications. Can the gooseneck be repositioned during delicate observations without introducing vibration? The self-supporting gooseneck design is intended to hold position once aligned, providing stable illumination for delicate microscopy tasks with minimal disturbance. What is the functional benefit of the 365 nm wavelength? A 365 nm UV LED provides ultraviolet illumination that enhances fluorescence contrast and highlights features that are less visible under visible-spectrum lighting, improving inspection clarity. Is the LE.5261 supplied ready to install? The module is supplied as a single unit in the current plug version and is prepared for direct installation into compatible Euromex illumination mounts. Does the light guide require additional accessories for operation? No additional accessories are listed; the LE.5261 is an exchangeable light-guide unit designed for direct integration with the specified Euromex bases. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from a modular, workshop-ready lighting solution that combines an interchangeable, self-supporting gooseneck with a 395 nm high‑power violet LED to improve visual contrast and simplify maintenance; order the part directly via Metav Werkzeuge or contact their consultants for advice. Light Guide LE.5262 — interchangeable gooseneck with 395 nm violet LED (Euromex) The Light Guide LE.5262 is an auxiliary illumination module designed for close‑range inspection and microscope lighting, providing compact, targeted near‑violet light for improved detail visibility. Interchangeable self-supporting gooseneck 395 nm high-power violet LED Fits NZ.9018, LE.5207 and LE.5212 Supplied in the current plug version Precise contrast with concentrated near‑violet illumination The LE.5262 uses a 395 nm wavelength near‑violet LED, offering concentrated light that improves contrast on fine details and subtle surface features without enlarging the lighting footprint. The focused emission is especially useful where visible‑light sources fail to reveal faint marks or edges; in practice this means clearer inspection results and fewer repeat checks. The description of the wavelength clarifies the spectral range for technicians assessing material response to near‑violet light. Quick positional adjustment and low‑effort handling An interchangeable, self‑supporting gooseneck enables rapid, tool‑free positioning above the workpiece, reducing setup time at the bench. The design removes the need for additional clamps or supports and allows precise aiming of the near‑violet LED beam. The unit is supplied in the current plug version, ensuring compatibility with modern illumination ports and simplifying replacement in existing assemblies. Keeps spare parts and service simple Compatibility with models NZ.9018, LE.5207 and LE.5212 makes the module a practical choice for labs and workshops that maintain mixed Euromex lighting equipment. The modular format reduces the number of bespoke spare parts required and shortens maintenance cycles, which supports continuous production and inspection processes while keeping inventory straightforward. Durable accessory for inspection and microscopy lighting Built for repeated positioning, the LE.5262’s self‑supporting neck retains its shape during routine use, preserving beam alignment over time and reducing the frequency of readjustment. As an accessory intended for microscopy lighting and inspection stations, the module contributes to consistent illumination quality and dependable visual checks, helping teams reach reliable decisions faster and with greater confidence. For precision inspection lighting, request the Euromex Light Guide LE.5262 through Metav Werkzeuge — contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and procurement support Technical Data Manufacturer article number: LE.5262 SKU: LE.5262 Product type: Light guide Packaging: 1 piece Manufacturer: Euromex Facts Wavelength: 395 nm Compatible models: NZ.9018, LE.5207, LE.5212 Special features Interchangeable, self-supporting gooseneck High‑power violet LED Current plug version Supplied as 1 piece FAQ Which inspection systems is this light guide compatible with? The Euromex Light Guide LE.5262 is compatible with NZ.9018, LE.5207 and LE.5212 inspection and microscope lighting modules. What wavelength does the LED use and what is the benefit? The LE.5262 features a 395 nm high‑power violet LED; this near‑violet emission enhances contrast on fine details and can make subtle surface features easier to distinguish during visual inspection. Can the gooseneck be positioned without extra supports? Yes, the interchangeable, self‑supporting gooseneck of the LE.5262 holds its position without additional clamps, enabling precise alignment above the workpiece. How is the product supplied and what connector version is included? The light guide is supplied as a single unit (1 piece) and comes in the current plug version for straightforward integration with compatible Euromex lighting modules. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, energy‑efficient 3 W LED replacement that restores consistent illumination to Delphi‑X Observer microscopes; the robust LED design reduces specimen heating and lowers maintenance intervals. Order the unit directly via Metav Werkzeuge or consult our specialists for application advice. Euromex Delphi‑X Observer DX.9993 — 3 W LED replacement for Delphi‑X Observer microscopes The Delphi‑X Observer DX.9993 is a purpose‑built replacement LED illumination unit for Delphi‑X Observer microscopes, intended to provide steady, low‑heat lighting for laboratory and teaching environments. 3 W LED replacement lamp Compatible with Delphi‑X Observer series Long‑life, low‑heat LED technology Stable, efficient illumination for routine microscopy The 3 W LED module delivers a steady white light output designed for continuous observation in life‑science and educational settings. Compared with older halogen lamps, the LED variant provides lower thermal load on specimens and optical components, which helps preserve delicate samples during prolonged examinations. The reduced energy consumption of the LED unit also contributes to operational efficiency in busy workflows, supporting predictable illumination without frequent lamp changes. Direct replacement designed for Delphi‑X Observer installations This replacement lamp is manufactured as a drop‑in illumination unit for the Delphi‑X Observer series and carries the item code DX.9993 for unambiguous identification. The compact format and standardised electrical rating simplify stock management and spare‑parts planning in laboratories and teaching workshops. As a compatible replacement component, the unit supports uninterrupted use of existing microscopes while maintaining the optical performance expected from the original system. Low maintenance and extended service life for dependable use LED technology offers a markedly longer service life than conventional bulbs, translating into fewer replacements and lower lifecycle handling. The long‑life LED characteristic reduces downtime and maintenance costs, which is advantageous for facilities that require dependable daily operation. Because the light source produces less heat, heat‑sensitive optics and specimens benefit from a more stable operating environment, which supports process reliability and repeatable observation results. Practical suitability across laboratories and education The replacement unit is suitable for a range of standard microscopy tasks in schools, teaching laboratories and basic research facilities where consistent, low‑heat illumination is required. The energy‑efficient LED solution helps laboratories align with practical sustainability goals while maintaining the clarity and contrast necessary for routine inspections and demonstrations. For additional technical specifications or compatibility checks, the product documentation and parts lists should be consulted to confirm fitment within existing instrument configurations. For reliable illumination and spare‑parts continuity, request the Euromex Delphi‑X Observer DX.9993 through Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com / +49 2822 7131930 for tailored advice and supply options. Technical data Article number: DX.9993 Brand: Euromex Series: Delphi‑X Observer Product type: Microscope replacement illumination Facts Power: 3 W LED Special features Replacement for Delphi‑X Observer microscopes Low‑heat LED technology Item code: DX.9993 FAQ What is the light source and power rating of the replacement unit? The replacement unit uses a 3 W LED light source; the Euromex Delphi‑X Observer DX.9993 is specified as a 3 W LED replacement for the Delphi‑X Observer series. Is the DX.9993 compatible with all Delphi‑X Observer microscope models? The DX.9993 is intended as a replacement illumination unit for the Delphi‑X Observer series; compatibility should be verified against the instrument parts list to confirm mechanical and electrical fit. How does the LED replacement affect specimen heating compared with older lamps? The LED technology in the DX.9993 produces considerably less heat at the specimen plane than traditional halogen bulbs, reducing thermal impact on sensitive samples and nearby optics. What operational benefits does the LED replacement provide for teaching labs? The unit offers longer service life and lower maintenance demand, delivering consistent illumination for demonstrations and extended teaching sessions while cutting the frequency of lamp changes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of consistent 3 W LED illumination and a compact replacement design for dependable microscope lighting—ideal for laboratories and workshops that require steady, energy-efficient light. Order or request advice via Metav Werkzeuge for supply from the Emmerich hub. NeoLED replacement unit 3 W SL.5503 — Euromex microscope replacement lamp, 3 W LED The NeoLED replacement unit 3 W SL.5503 is a compact microscope replacement lamp designed to deliver uniform illumination for routine inspection and laboratory use, suitable for microscopy lighting applications. Compact 3 W LED module Stable colour temperature for imaging Easy, tool-free replacement Low power consumption Consistent illumination that supports precise inspection The NeoLED replacement unit provides steady, glare‑free illumination with a rated output of 3 W, which is well suited to common microscopy tasks. The low wattage is translated into efficient light generation by the LED technology, enabling uniform lighting across the field of view and reducing the need for frequent readjustment. For users who rely on consistent visual conditions—whether for quality control, education or routine laboratory work—this illumination unit helps maintain reliable observation results by keeping brightness and colour rendering stable during sessions. Efficient operation and straightforward maintenance Thanks to the LED design, the unit offers energy-efficient operation and extended service life compared with traditional filament bulbs. The compact module is conceived for straightforward replacement, minimising downtime: the design reduces the steps required to swap the lamp and avoids complex calibration afterward. This translates into better productivity on the workbench and lower recurring maintenance effort, making the module a practical choice where simple, reliable illumination is preferred over elaborate lighting systems. Flexible use across microscopy applications The replacement unit is intended for microscope lighting and fits within the lighting and microscopy accessories category, making it adaptable for a wide range of inspection and teaching instruments that accept NeoLED modules. Its combination of LED efficiency and compact dimensions supports both bench microscopes and portable rigs where space and heat management are important. With the Euromex designation and the SKU SL.5503, procurement and inventory identification are simplified for workshop and laboratory supply chains. Choose the Euromex NeoLED replacement unit SL.5503 for dependable 3 W LED illumination and contact Metav Werkzeuge for tailored advice or to secure supply from our Emmerich hub via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: SL.5503 SKU: SL.5503 Brand: Euromex Product type: Microscope replacement lamp Label: NeoLED-Ersatzeinheit 3 W SL.5503 Core specifications Power: 3 W Features and compatibility LED replacement unit Category: Lighting / Microscopy accessories / Bulbs Manufacturer: Euromex FAQ What power rating does the replacement unit have? The NeoLED replacement unit SL.5503 is rated at 3 W, providing efficient LED illumination for microscope applications. Is this module suitable for routine laboratory inspection? Yes, the Euromex NeoLED replacement unit is designed to deliver stable and uniform illumination, making it suitable for regular inspection and educational use. Can the lamp be replaced without specialist tools? The unit is intended for straightforward replacement and minimal maintenance, reducing downtime during lamp changes. Will the NeoLED replacement unit affect image colour rendering? The LED design emphasises a stable colour temperature to maintain consistent visual conditions, which supports reproducible observations. How is the product identified for procurement? The lamp is listed under SKU SL.5503 and labelled NeoLED replacement unit 3 W SL.5503 for clear identification in supplies and inventory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from the self-supporting gooseneck for stable positioning and the 4 mm diameter that delivers focused illumination exactly where it is needed. Order the light guide directly via Metav Werkzeuge or consult our specialists for precise technical advice. Euromex single-arm gooseneck light guide LE.5213 — 50 cm, 4 mm The Euromex single-arm gooseneck light guide LE.5213 is a self-supporting, flexible illuminator designed for close-up microscopy and inspection tasks. Self-supporting gooseneck arm 50 cm length 4 mm light guide diameter for focused illumination Robust build for laboratory and inspection use Integrates with common lighting setups in microscopy Stable positioning for repeatable inspection The self-supporting gooseneck construction offers reliable, vibration-resistant positioning so the light source remains steady during delicate procedures. With a 50 cm reach, the arm enables flexible placement without frequent readjustment, which reduces process downtime and increases throughput in repetitive measurement or inspection tasks. This stable arrangement is particularly beneficial for precision visual work where consistent lighting reduces measurement variance and supports quicker decision-making on the shop floor. Concentrated illumination for small fields of view A 4 mm diameter light guide produces a compact, concentrated beam that improves contrast on small targets and in narrow workspaces. Concentrating light into a defined spot decreases stray illumination and assists in revealing fine detail on circuit boards, small components or specimen slides. The focused light source enhances visual acuity and can make defect detection and manual assembly more efficient, translating the simple geometry of the guide into measurable gains in inspection quality. Practical design for routine laboratory and workshop use Built by Euromex, the unit combines straightforward mechanics with a design suited to continuous use in bench-top environments. The single-arm layout minimises obstruction of the work area while the gooseneck keeps the light precisely where required, supporting both handheld inspection and fixed microscopy setups. The model LE.5213 offers a compact, low-maintenance solution for teams that prioritise dependable illumination and straightforward handling during daily operations. For procurement and expert assistance regarding the Euromex single-arm gooseneck light guide LE.5213, contact Metav Werkzeuge at +49 2822 7131930 or info@metav-werkzeuge.com to arrange supply and technical guidance Technical data Article number: LE.5213 SKU: LE.5213 Manufacturer: Euromex Product type: Light guide Core specifications Length: 50 cm Diameter: 4 mm Arm: single-arm Features Self-supporting gooseneck construction Designed for microscopy and inspection lighting Image file: LE.5213.jpg FAQ How stable is the gooseneck arm under extended positions? The Euromex single-arm gooseneck light guide LE.5213 uses a self-supporting arm that holds its set position, delivering stable illumination for precise inspection and measurement tasks. What beam characteristic does the 4 mm diameter provide? The 4 mm diameter light guide concentrates light into a focused spot, improving contrast and visibility for small-area inspection such as electronics or fine specimen work. Is the 50 cm reach suitable for bench-top microscopy? A 50 cm arm length provides generous reach for most bench-top setups, allowing flexible positioning without impeding the working area around the microscope or inspection station. Which applications are most appropriate for this light guide? This light guide is intended for close-up lighting in microscopy accessories, visual inspection, electronics assembly and other tasks requiring directed, stable illumination. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise, directional illumination provided by the combination of a three‑arm configuration, a self‑supporting gooseneck and a narrow 4 mm light channel for focused inspection lighting. Order the item directly via Metav Werkzeuge or consult the sales team for integration advice. Euromex LE.5215 — Three‑arm light guide (50 cm self‑supporting gooseneck, 4 mm) The Euromex LE.5215 is a three‑arm light guide designed to deliver controlled, adjustable illumination for microscopy and close‑inspection tasks Three‑arm arrangement for multi‑angle lighting Self‑supporting gooseneck for stable positioning 50 cm reach for flexible working distances 4 mm diameter for narrow, focused light Precise, directional lighting for inspection and microscopy The LE.5215 provides focused illumination where even minor detail matters. The three‑arm layout enables separate light vectors to be positioned around a specimen or workpiece, reducing shadows and improving contrast during visual inspection. Because the assembly is a fibre light guide, the light is transmitted without heat at the tip, which is beneficial for temperature‑sensitive tasks. This construction offers a reliable method for enhancing visibility on microscopes, inspection benches and fine‑assembly stations while keeping the light source at a safe distance. Robust positioning with a self‑supporting gooseneck A key benefit is the self‑supporting gooseneck, which holds set positions without constant manual pressure. The 50 cm length gives a practical working radius, and the slender 4 mm channel keeps the light beam narrow and precise. The combination of reach and stiffness means operators can set the beam once and maintain consistent illumination for repetitive tasks. For users needing repeatable lighting angles, this reduces setup time and contributes to more consistent visual assessments across batches. Practical advantages in daily workshop use The three‑arm arrangement translates into tangible efficiency gains: multiple angles can be illuminated simultaneously, cutting the need to reorient either the part or the lamp between inspection steps. The LE.5215 is compact and integrates into existing illumination systems used in microscopy and close‑up quality control. Cleaning and routine care are straightforward due to the simple external construction, supporting long‑term reliability and low maintenance overhead. Suitable applications and integration notes Designed for microscopy illumination and other close‑range visual work, this light guide fits contexts where controlled, cool lighting is required—such as component inspection, soldering checks and laboratory sample preparation. The narrow 4 mm diameter assists in delivering a focused beam, useful when highlighting fine features without flooding the entire field with light. For integration details or to confirm compatibility with a specific lamp housing, technical advice is available from the supplier. Contact Metav Werkzeuge today to discuss the Euromex LE.5215 three‑arm light guide and arrange the optimal lighting solution for the workshop or laboratory environment. Technical Data Article number: LE.5215 SKU: LE.5215 Manufacturer: Euromex Product type: Light guide Data Arms: 3 Length: 50 cm Diameter: 4 mm Special features Self‑supporting gooseneck Suits microscopy illumination applications Image: LE.5215.jpg FAQ What is the primary use of this light guide? The LE.5215 is intended for directed lighting in microscopy and close‑inspection tasks where focused, cool illumination is required. How stable is the gooseneck during prolonged use? The self‑supporting gooseneck of the LE.5215 maintains its set position reliably during standard inspection and assembly operations, reducing the need for frequent readjustment. Can the three arms be oriented independently? Yes, the three arms on the Euromex LE.5215 can be positioned to create separate light vectors for multi‑angle illumination without affecting adjacent arms. Is the light at the tip hot during operation? As a fibre light guide, the LE.5215 transmits light without significant heat at the emitting end, making it suitable for temperature‑sensitive inspection tasks. How should the light guide be cleaned and maintained? Routine maintenance for the LE.5215 involves gentle cleaning of external surfaces and ensuring the gooseneck retains its integrity; avoid aggressive solvents and store with the arms in a neutral position. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from the combination of flexible, targeted illumination and a robust, self-supporting goose-neck for consistent inspection work; order the LE.5214 two-arm light guide directly via Metav Werkzeuge or consult our specialists for configuration advice. LE.5214 two-arm self-supporting goose-neck light guide (50 cm, 4 mm) by Euromex LE.5214 is a two-arm light guide designed to provide flexible, directed illumination for microscopes and inspection stations Two-arm design for targeted illumination Self-supporting goose-neck, 50 cm reach 4 mm diameter flexible light guides Focussing heads not included for modular setup Precise, targeted illumination for close inspection The two-arm configuration delivers controllable, targeted illumination that reduces unwanted reflections and improves contrast on small components. Each 4 mm conductor guides light into a focussed beam, making fine detail more visible under microscopes and inspection rigs. This arrangement supports visual tasks where consistent lighting angle and intensity are essential for repeatable inspections and quality checks, contributing to faster fault detection and lower rework rates. Stable positioning that preserves setup accuracy A self-supporting goose-neck with a 50 cm reach provides secure, vibration-resistant positioning so the illumination remains where it is set. The mechanical stiffness of the arm minimises drift during prolonged measurements or soldering operations, allowing illumination to be adjusted once and relied upon across multiple parts. This stability is particularly valuable in laboratory and workshop environments where repeatability and operator independence are required. Modular configuration for adaptable workflows The design intentionally omits built-in heads—focussing heads not included—so the system can be combined with existing light sources and microscope adapters. This modular approach enables integration into established setups without replacing lighting across the bench. The separate heads concept supports customised assembly: select the most suitable light source and coupling to match task-specific brightness and colour temperature requirements, simplifying inventory and future upgrades. Narrow profile for access to confined work areas With a 4 mm diameter, the light conductors reach narrow gaps and tight assemblies while delivering a focused beam where it is needed. The slim profile reduces shadowing and permits illumination of cavities that larger lamps cannot reach, aiding work on electronics, dental models and small mechanical parts. The flexible conductors also allow subtle beam adjustment without disturbing the component, preserving delicate assemblies and improving inspection ergonomics. Order the Euromex LE.5214 via Metav Werkzeuge for an adaptable, stable lighting solution; Metav Werkzeuge offers expert advice from Emmerich and can advise on compatible focussing heads and integration options Technical data Article number: LE.5214 SKU: LE.5214 Manufacturer: Euromex Product type: Light guide Category: microscopy accessories / illumination / light guides Facts Length: 50 cm Diameter: 4 mm Arms: 2 Special features Self-supporting goose-neck Two-arm light guide Focussing heads not included Flexible light conductors FAQ What applications is this light guide suitable for? The Euromex LE.5214 two-arm light guide is suitable for microscopy and close visual inspection tasks where directed, adjustable illumination is needed. Are focussing heads included with the LE.5214? No, the LE.5214 is supplied without focussing heads to allow modular integration with chosen light sources and adapters. How far does the goose-neck reach and hold position? The goose-neck provides a 50 cm reach and is self-supporting, offering stable positioning for repeatable inspection setups. Can the light guide access narrow spaces? Yes, the 4 mm diameter light conductors are designed for access to confined areas and fine-detail work. Is the LE.5214 compatible with standard microscope illumination systems? The LE.5214 is designed as a modular light guide and can be combined with suitable microscope light sources and couplings; compatibility depends on the chosen head or adapter. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from the combination of compact dimensions, high illuminance and flexible positioning to ensure reliable inspection lighting in workshops and laboratories; order the Euromex LED gooseneck illumination directly via Metav Werkzeuge or consult their specialists for tailored advice. Euromex LED gooseneck illumination LE.5207 — 2 × 3 W LEDs, 25,000 lx LED gooseneck illumination LE.5207 offers concentrated cold‑white light for inspection and microscopy accessories in a compact housing. 2 × 3 W LEDs with 25,000 lx illuminance Neutral 6,500 K daylight colour temperature Flexible gooseneck for precise light positioning Universal 100–240 V AC and 5 V DC supply Precise, measurable light for exacting inspection tasks The small lamp delivers a high illuminance of 25,000 lx from a modest power draw of 2 × 3 W, providing concentrated illumination for detail work. The 6,500 K colour temperature creates a neutral, daylight‑like appearance that supports accurate colour rendition during visual inspection. Compact dimensions of 70 × 106 × 140 mm (H × W × D) and a weight of 1.5 kg make the unit suitable where bench space is at a premium. These quantified characteristics support predictable results and efficient workflows in quality control or laboratory stations. Flexible positioning and accessory compatibility for targeted lighting A flexible gooseneck enables accurate alignment of the light beam, so the illuminated area can be adjusted without moving the workpiece. The product is compatible with interchangeable light arms and polarisation filters (LE.5260–LE.5264), allowing adaptation to reflective surfaces or tasks that require reduced glare. The design emphasises targeted illumination and ergonomic handling, reducing the need for repositioning and supporting steady inspection routines. The lamp’s compact footprint helps maintain a tidy workstation with uninterrupted sightlines to the object under inspection. Power options and practical operation for workshop environments The luminaire accepts both 100–240 V AC and 5 V DC, ensuring compatibility with standard mains supplies and low‑voltage setups. With LED technology providing concentrated output at low wattage, the unit achieves efficient lighting without demanding high electrical capacity. The product’s simple electrical requirements and modest weight simplify integration into existing microscopes and cold‑light source arrangements. For procurement and technical compatibility, Metav Werkzeuge’s product information and accessory listings clarify which polarisation or arm options match specific inspection applications. For precise, adaptable inspection lighting choose the Euromex LE.5207 and contact Metav Werkzeuge for competent supply and advice from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: LE.5207 SKU: LE.5207 Manufacturer: Euromex Core specifications Dimensions: 70 x 106 x 140 mm (H x W x D) Weight: 1.5 kg Light output: 25,000 lx Light source: 2 x 3 W LED Colour temperature: 6,500 K Power supply: 100–240 V AC; 5 V DC Features and accessories Product type: LED gooseneck illumination Compatible accessories: LE.5260, LE.5261, LE.5262, LE.5263, LE.5264 (interchangeable light arms / polarisation filters) Category: Cold light sources (microscopy accessories) FAQ What light intensity does the lamp provide? The Euromex LED gooseneck illumination LE.5207 delivers up to 25,000 lx from its 2 × 3 W LED modules for concentrated inspection lighting. Is the colour temperature suitable for detailed visual inspection? Yes, the unit emits 6,500 K daylight‑neutral light, which is appropriate for accurate colour assessment during inspection tasks with the Euromex LE.5207. Which power sources are supported by this illumination? The device supports 100–240 V AC mains and 5 V DC supplies, making the LE.5207 adaptable to common workshop and laboratory power configurations. Are there compatible accessories for polarisation or specialised light arms? Interchangeable light arms and polarisation filters are available (LE.5260–LE.5264) to expand the LE.5207’s functionality for glare control and specialised inspection needs. Is the product suitable where bench space is limited? Yes, the compact footprint (70 × 106 × 140 mm) and light weight (1.5 kg) allow the gooseneck lamp to be integrated into tight workstations without occupying excessive space. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the compact design, 20 W halogen cold illumination and the 40 cm self-supporting light guide for consistent, glare-free inspection. Order the unit directly via Metav Werkzeuge or consult their technical advisors for tailored guidance. Cold Light Source LE.5209 – 20 W halogen, 40 cm light guide (Euromex) The Cold Light Source LE.5209 is a compact halogen illumination module for microscopy accessories and benchtop inspection tasks, offering stable fixed-intensity light and versatile mains compatibility. 20 W halogen cold light source Fixed-intensity illumination at 3000 K Self-supporting 40 cm light guide, Ø 6 mm Compact design: 80 x 110 x 165 mm Reliable, glare-free illumination for precise inspection The electric lamp delivers 20 W halogen output as a cold light solution with fixed intensity, ensuring steady brightness for visual inspection and image capture. The 3000 K colour temperature provides a warm white emission that preserves natural colour rendition, which supports accurate assessment of surface finishes and component details. Stable illumination reduces the need for repeated adjustments, contributing to more efficient inspection workflows and consistent visual results. Robust, compact design for laboratory and workshop benches With dimensions of 80 x 110 x 165 mm and a weight of 2 kg, the unit fits easily on crowded workbenches and in small laboratory setups. The compact benchtop footprint and quiet operation make it suitable where space and disturbance are considerations. Dual-voltage capability (110 or 230 V AC) allows integration across different mains environments without additional transformers, simplifying installation and minimising downtime when moving between sites. Flexible positioning for targeted lighting and confined spaces The supplied self-supporting light guide (length 40 cm, Ø 6 mm) enables precise placement of the light beam into tight or awkward spaces while maintaining its position without additional clamps. This design facilitates targeted illumination for delicate inspection tasks and reduces stray light, improving contrast on the area of interest. The rigid yet adjustable guide is particularly useful when working with small assemblies, solder joints or detailed surface inspections where focused, stable light is required. Consistent results and straightforward system integration The fixed-intensity halogen source delivers reproducible lighting conditions that help to standardise inspection procedures and visual checks. The unit is listed under microscopy illumination accessories and is designed for straightforward integration into existing inspection stations and microscope setups. Technical documentation and compatibility information are available from Metav Werkzeuge for those assessing fit with specific optical systems or laboratory arrangements. Contact Metav Werkzeuge for expert advice on integrating the LE.5209 into existing inspection workflows and for rapid supply from Emmerich; technical consultants are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: LE.5209 SKU: LE.5209 Type: Cold light source Brand: Euromex Specifications Power: 20 W Colour temperature: 3000 K Weight: 2 kg Dimensions: 80 x 110 x 165 mm (H x W x D) Light guide length: 40 cm Light guide diameter: 6 mm Voltage: 110 or 230 V AC Features Cold light source, halogen, fixed intensity Self-supporting light guide, 40 cm, Ø 6 mm Suitable for microscopy illumination Compact benchtop unit FAQ Is the unit suitable for microscope illumination? The LE.5209 is intended as a microscopy illumination accessory and provides stable 20 W halogen cold light suitable for many inspection and visualisation tasks. What does the 3000 K rating mean for visual checks? A 3000 K colour temperature on the LE.5209 produces warm white light, which preserves colour accuracy for surface inspection and helps with reliable visual assessment. Can the unit run on different mains supplies? The LE.5209 accepts 110 or 230 V AC, allowing use in locations with either mains voltage without additional conversion equipment. How long and rigid is the light guide? The LE.5209 is supplied with a self-supporting light guide of 40 cm length and Ø 6 mm, designed to maintain position for targeted illumination in confined areas. Does the lamp provide a constant brightness level? The halogen source in the LE.5209 operates at fixed intensity, ensuring consistent brightness for repeatable inspection conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from polarising illumination, high luminous intensity and flexible mounting to improve contrast and repeatability in inspection tasks; order support and delivery are available via Metav Werkzeuge for fast integration advice. Polarisierendes LED‑Ringlicht LE.1975 — Polarising LED ring light with 16 Power‑LEDs by Euromex The Polarisierendes LED‑Ringlicht LE.1975 is a polarising ring light designed to deliver uniform, high‑contrast illumination for microscopy and visual inspection over a working distance of 40–120 mm Polarising illumination for reduced glare 16 Power‑LEDs for consistent brightness 44,000 lx at 100 mm for high contrast Mounting diameter 25–61 mm for flexible fitting Enhanced contrast for precise inspection results The polarising design of this ring light provides reduced specular reflection, which translates into clearer images and more reliable visual evaluation of surfaces, coatings and small features. With 44,000 lx at 100 mm, the light unit produces measurable illuminance that supports objective inspection criteria and speeds up visual tasks. For quality control and microscopy applications, the polarising function helps to reveal surface structures that unpolarised lamps can mask, enabling more accurate assessments and fewer reworks. Versatile mounting and adjustable working distance for workflow flexibility A broad mounting diameter of 25–61 mm and a working distance of 40–120 mm allow straightforward integration with a wide range of stereo microscopes, inspection stands and camera objectives. The flexible fitting reduces retrofit time and minimises the need for additional adapters; the nominal outer diameter of 90 mm keeps the light compact while providing full coverage of common objective fields. These mechanical values support quick setup changes and predictable lighting geometry in production or laboratory environments. Consistent colour and dependable power options for repeatable imaging Colour temperature between 6500–7500 K ensures a cool, daylight‑balanced output that aids colour fidelity in imaging and visual inspection. The unit is powered via 100–240 V AC or 12 V DC, offering compatibility with laboratory mains and common inspection‑system supplies. The array of 16 Power‑LEDs delivers even distribution of light across the field, reducing shadowing and improving image processing results. For photo documentation or automated camera systems, this stability in output helps to maintain consistent measurement conditions. For technical consultation or delivery arrangements contact Metav Werkzeuge for assistance with system compatibility, integration advice and prompt dispatch from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: LE.1975 SKU: LE.1975 Manufacturer: Euromex Product type: Polarising LED ring light Key specifications Working distance: 40–120 mm Outer diameter: 90 mm Illuminance: 44,000 lx at 100 mm Light source: 16 Power‑LEDs Colour temperature: 6500–7500 K Mounting diameter: 25–61 mm Power supply: 100–240 V AC; 12 V DC Features & compatibility Polarising LED ring light Polarisation: yes Category: Microscopy accessories › Illumination › Ring lights Brand: Euromex FAQ What advantage does polarisation offer for surface inspection? Polarisation reduces glare and suppresses unwanted reflections so that the Polarisierendes LED‑Ringlicht LE.1975 reveals fine surface detail and texture more reliably than non‑polarised lighting. Which microscopes and objectives can it be mounted on? The mounting diameter of 25–61 mm makes the LE.1975 compatible with a wide range of stereo microscopes and inspection heads; adapters are rarely required thanks to the flexible fitting range. How bright is the light in typical use? At a working distance of 100 mm the ring light produces 44,000 lx, providing strong, uniform illumination suitable for documentation and visual measurement tasks. Is the colour temperature suitable for imaging and documentation? Yes. The 6500–7500 K range offers a daylight‑balanced output that supports consistent colour rendition for photography and automated image analysis. What power options are available for integration into inspection systems? The unit accepts 100–240 V AC and 12 V DC, enabling connection to standard laboratory mains or low‑voltage inspection equipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com