Quarz Wedge in Slider for Reflected Light Illumination for iScope Polarisation Models, IS.9604-R - Euromex
Take advantage of the precise optical control and hassle-free integration of this slider-mounted quartz wedge to improve contrast in reflected-light polarisation inspections; its compatibility with iScope polarisation models streamlines upgrades and reduces downtime. Order directly via Metav Werkzeuge or consult our specialists for application advice. Euromex IS.9604-R — Quartz Wedge Slider for Reflected-Light Polarisation (Microscope Filter) Euromex IS.9604-R is a slide-mounted quartz wedge designed to enhance reflected-light contrast in iScope polarisation microscope systems. Quartz wedge for reflected-light illumination For iScope polarisation models by Euromex Slide-mounted design for filter slot integration Optical-grade quartz for controlled birefringence Enhanced contrast for polarised reflected-light inspection The quartz wedge provides controlled phase retardation that improves the visibility of birefringent structures under reflected-light polarisation. By introducing a subtle optical path difference, the component helps reveal stress patterns, surface relief and material anisotropies that are otherwise difficult to detect with standard illumination. This effect is particularly beneficial when examining coatings, composites and metallographic samples where polarisation delivers decisive diagnostic information. The design supports consistent imaging results and assists in faster interpretation during routine inspections. Seamless integration with iScope polarisation systems A slide-mounted format ensures the wedge can be fitted into the existing filter holder without mechanical modification. The slide-mounted arrangement is intended for straightforward insertion into the filter slot of iScope polarisation models, delivering stable alignment and repeatable positioning. This compatibility reduces installation time and preserves the microscope’s calibration, so optical technicians and laboratory staff can apply the accessory with minimal interruption to workflows. If further specification checks are required, Metav Werkzeuge provides technical guidance for integration planning. Durable optical material for stable, repeatable results Made from optical-grade quartz, the wedge maintains stable birefringent properties over extended use and across typical laboratory lighting conditions. Quartz resists many environmental influences that affect lesser materials, ensuring the optical behaviour remains consistent session to session. The robust material choice supports frequent handling and standard cleaning routines without significant degradation of performance, making the component suitable for production control, quality assurance and educational environments where long-term reliability is valued. Practical advantages for laboratory and workshop environments The accessory contributes to improved measurement certainty and faster decision-making by enhancing the visual cues technicians rely on during polarised inspections. Its focused function reduces the need for complex illumination adjustments and complements existing contrast techniques within a microscopy suite. For customers uncertain whether this accessory meets specific requirements or in need of supplementary technical data, Metav Werkzeuge offers direct assistance via email or telephone to clarify suitability and ensure the chosen configuration aligns with application goals. For procurement and technical assistance regarding the Euromex IS.9604-R quartz wedge slider, contact Metav Werkzeuge for expert advice and reliable supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: IS.9604-R SKU: IS.9604-R Manufacturer: Euromex Product type: Microscope filter Label: Quarzkeil im Schieber für Auflichtbeleuchtung für iScope-Polarisationsmodelle IS.9604-R Facts No numerical data provided Special features Quartz wedge in slider for reflected-light illumination Intended for iScope polarisation microscope models Slide-mounted filter configuration Categories: Microscopy accessories · Contrast methods · Polarisation Image: IS.9604-R.jpg (gallery available) FAQ What is the primary function of the quartz wedge slider? The Euromex IS.9604-R quartz wedge slider (microscope filter, SKU IS.9604-R) introduces controlled phase retardation for reflected-light polarisation, improving contrast and revealing birefringent features on specimen surfaces. Is this accessory compatible with all iScope polarisation models? The component was developed for iScope polarisation models and is intended for the filter slider; compatibility should be confirmed against the specific iScope model and its filter-slot dimensions before purchase. How is the quartz wedge installed in the microscope? Installation is by insertion into the filter slider; the slide-mounted format preserves alignment and calibration when placed into the designated filter slot of supported iScope polarisation microscopes. Can the quartz wedge be used for transmitted-light polarisation? This quartz wedge is specified for reflected-light illumination. Its optical effect is tailored to reflected-light polarisation workflows rather than transmitted-light polarisation setups. What maintenance is recommended for the optical component? Routine cleaning with appropriate optical cleaning agents and careful handling is advised to preserve the optical-grade quartz surface and ensure stable performance over time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ring Light Illumination Accessory LE.5239 - Euromex
Benefit from the combination of Euromex quality, ring‑light compatibility and clear identification (LE.5239); order the lighting accessory directly via Metav Werkzeuge or consult the team for suitability checks. Euromex LE.5239 Lighting Accessory — ring‑light component for microscopy illumination A practical LE.5239 lighting accessory intended to complement ring‑light systems used in microscopy and inspection tasks. Euromex original accessory Compatible with ring‑light systems Article number LE.5239 Consistent supplementary illumination for inspection tasks The lighting accessory is specified as a component for ring‑light setups and is intended to support even illumination in microscopy workflows. By acting as an accessory to a ring‑light, it contributes to minimised shadowing and improved visual contrast for camera capture and manual inspection. The function focuses on enhancing light distribution rather than replacing primary light sources, making it suitable as a targeted addition to existing illumination assemblies. Technical drawings mention its role as lighting equipment. Simple integration into laboratory and workshop setups Integration is straightforward where a ring‑light infrastructure exists; the accessory is listed under the ring‑lights category for microscopy accessories and therefore aligns with standard microscope lighting arrangements. Compatibility with ring‑light systems supports interchangeable use in imaging stations or bench inspection rigs. The component is particularly useful when additional illumination parts are required to adapt a ring‑light to specialised tasks without altering the main lighting unit. Procurement clarity and brand alignment The product is an original Euromex component identified by the article number LE.5239, which simplifies ordering and inventory management. Specification references appear in illustrative material as lighting accessory equipment, so procurement can proceed on the basis of the SKU and category. For workshops and technical buyers seeking to standardise illumination parts, the clear labelling and category assignment support streamlined supply-chain decisions and reduced sourcing complexity. Contact Metav Werkzeuge for compatibility confirmation, order coordination and procurement advice for the Euromex LE.5239 lighting accessory — email info@metav-werkzeuge.com or call +49 2822 7131930 to request further information through Metav Werkzeuge. Technical Data Article number: LE.5239 Manufacturer: Euromex Product type: Lighting accessory SKU: LE.5239 Category: Ring lights Facts UID: LE.5239 Label: Beleuchtungszubehör LE.5239 Special features Listed as a lighting accessory in an illustration Intended for ring‑light microscopy setups Category path: Mikroskopie‑Zubehör > Beleuchtung > Ringlichter FAQ What is the primary purpose of this accessory? The accessory functions as a supplementary lighting component for ring‑light systems, intended to improve illumination characteristics in microscopy and inspection contexts for the Euromex LE.5239. Is the accessory compatible with standard ring lights? The item is defined under the ring‑lights category and is presented as ring‑light equipment, indicating compatibility with ring‑light microscopy arrangements. Where are the technical specifications provided? Technical references for the component are noted only in an illustration as a lighting accessory; the article number LE.5239 should be used when requesting detailed specification sheets. Which brand manufactures this accessory? The accessory is produced by Euromex and is identified by the article number LE.5239 for order and inventory purposes. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Single Ø23.2mm Photo Tube Microscope Camera Adapter for iScope IS.9800, Tilting Head Compatible - Euromex
Optimise image capture with the precise camera coupling and ergonomic tilt compatibility; the adapter ensures stable photo tube integration and reliable alignment for fluorescence applications. Order the adapter directly via Metav Werkzeuge or consult the technical team for system matching. iScope IS.9800 Microscope Camera Adapter — single 23.2 mm photo tube for IS.5700 tilt head (Euromex) The iScope IS.9800 is a single photo tube camera adapter for iScope infinity systems, designed to connect a camera to the IS.5700 ergonomic tilting head for fluorescence and contrast microscopy Single Ø 23.2 mm photo tube connection Compatible with IS.5700 tilting head Designed for iScope infinity systems Ideal for fluorescence microscopy High-precision coupling for dependable image capture The single photo tube configuration provides a straightforward optical path that supports consistent optical alignment between the microscope body and imaging device. With a 23.2 mm diameter interface, the attachment matches common photo tube dimensions used in many laboratory microscopes, which reduces the need for complex adapters and preserves image geometry. This precise coupling benefits image acquisition by limiting decentring and facilitating reproducible documentation of specimens under fluorescence contrast, supporting routine imaging and documentation workflows. Ergonomic compatibility that improves workflow comfort Designed expressly for the IS.5700 ergonomic tilting head of the iScope infinity range, the adapter integrates with the tilting mechanism so that the camera axis remains aligned when the head is adjusted. The result is less manual re‑alignment and a smoother transition between observation and capture. Laboratories that perform extended imaging sessions benefit from the ergonomic design because handling is simplified and interruptions to the optical path are minimised, helping maintain steady throughput during teaching or multi‑sample analysis. Practical benefits for lab and teaching environments The compact, single‑tube arrangement simplifies system configuration and reduces setup time when switching between ocular and camera use. As a camera attachment for fluorescence applications, it supports consistent image capture across sessions, which is advantageous when documenting experiments or compiling image series. The straightforward mechanical interface also helps maintain a stable connection during routine use, contributing to operational reliability and predictable results in both research and instructional settings. Integration guidance and technical clarity The accessory is intended as a photo tube adapter for iScope systems and does not include camera bodies or extra optical components. Compatibility is determined by the camera mounting and any additional required adapters; the 23.2 mm photo tube provides the nominal interface dimension. If further technical specifications or confirmation of camera compatibility are required, the Metav technical team can provide guidance and help match the adapter to a specific imaging chain, ensuring the accessory performs as expected within existing equipment. For order placement or a technical consultation regarding the iScope IS.9800 camera adapter, contact Metav Werkzeuge — Metav combines broad product availability with in‑house expertise from Emmerich to ensure the correct adapter for the imaging setup is supplied. Technical Data Article number: IS.9800 SKU: IS.9800 Manufacturer: Euromex Product type: Microscope camera adapter Model series: iScope Facts Photo tube diameter: 23.2 mm Connection: single photo tube attachment Compatible head: IS.5700 ergonomic tilting head Application: Fluorescence microscopy Special features Designed for iScope infinity systems Single‑tube configuration for camera integration Suitable for research and teaching laboratories FAQ What cameras fit the adapter? Compatibility depends on the camera's required mount; the iScope IS.9800 provides a 23.2 mm photo tube interface and may require a camera‑specific intermediate adapter to match the camera's mount. Can the adapter be used for fluorescence imaging? Yes, the adapter is specified for use with fluorescence microscopy setups within the iScope infinity family and is compatible with the IS.5700 tilting head used in fluorescence contrast procedures. Is any additional optical element included? The iScope IS.9800 is supplied as a photo tube attachment only; cameras and further optical accessories are not included and should be selected according to the imaging requirements. Will the tilt function affect image alignment? The adapter is designed to integrate with the IS.5700 ergonomic tilting head so that camera alignment is preserved when the head is adjusted, reducing the need for repeated re‑alignment. Who can provide technical confirmation for a specific setup? Metav Werkzeuge can assist with compatibility checks and technical details to ensure the iScope IS.9800 matches the existing microscope and camera configuration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
SL.5504 Microscope Replacement LED Illumination Unit, Incident Lighting - Euromex
Take advantage of reliable LED incident lighting and straightforward replacement to restore microscope illumination quickly; the compact LED module reduces service downtime while providing stable, flicker-free light. Order the unit directly via Metav Werkzeuge or contact their consultants for technical advice. Euromex SL.5504 — Microscope replacement illumination (LED incident unit) The Euromex SL.5504 is a dedicated LED replacement unit for incident illumination in laboratory and educational microscopes, designed to restore consistent lighting performance in observation and inspection tasks. LED replacement unit for incident illumination Compact replacement unit for microscope lighting Article number SL.5504, brand Euromex Consistent, energy-efficient illumination for incident lighting The LED module provides a stable light source optimised for incident illumination, supporting improved surface contrast and clear specimen visibility under reflected-light setups. As an LED replacement unit, the module delivers consistent output without the warm-up and flicker associated with some older lamp technologies, which benefits image capture and prolonged observation sessions. This lighting solution is particularly useful where steady, repeatable illumination is required for inspection, teaching or documentation work. Simple swap-out and practical installation guidance The replacement unit is conceived as a compact replacement unit for microscope lighting modules; installation typically involves removing the existing lamp insert and fitting the new LED module into the lamp housing and connector provided by the instrument. Compatibility depends on the lamp housing type and connector arrangement used by the microscope model, so match the physical module dimensions and connector format before fitting. This approach reduces machine downtime and simplifies maintenance tasks in workshops and laboratories without requiring complex setup. Reliable partner and sensible choice for workshops and teaching labs Choosing a compact LED lamp module supports operational efficiency through reduced maintenance intervals and lower energy consumption compared with legacy lamps. Metav’s positioning as a precision partner means access to a broad range of measurement and workshop products combined with experienced distribution from Emmerich; this background underpins supply reliability and straightforward procurement for educational facilities and industrial workshops. The result is a practical lighting replacement that aligns with modern workshop standards and keeps routine inspection workflows running smoothly. Contact Metav Werkzeuge for procurement of the Euromex SL.5504 LED replacement unit or for tailored advice on lamp compatibility and delivery from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Manufacturer: Euromex Manufacturer article number: SL.5504 SKU: SL.5504 Product type: Microscope replacement illumination Facts No numeric specifications provided in the supplied data Special features LED replacement unit Incident illumination (reflected light) Product category: Microscopy accessories > Lighting > Lamps Source reference: Education PDF (LED replacement unit, incident illumination) FAQ What type of light source does this replacement unit use? The Euromex SL.5504 uses an LED light source configured for incident illumination to provide stable reflected-light performance. Can the SL.5504 be used with any microscope? The Euromex SL.5504 is a replacement lamp module intended for microscopes that accept the same style of lamp insert and connector; compatibility must be checked against the instrument’s lamp housing and connector format. Is special wiring required to install the replacement unit? Installation of the Euromex SL.5504 generally follows the lamp housing’s standard fitting procedure and does not require additional wiring if the connector and housing match the instrument specification. Will this module improve image stability during documentation? Yes, the LED-based design of the SL.5504 provides consistent illumination and reduced flicker, which supports more reliable image capture and documentation in inspection and teaching scenarios. Where is information about the SL.5504 sourced from? Product details for the Euromex SL.5504 are taken from the supplied education PDF and the provided product data. Manufacturer: Euromex / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
StereoBlue Protective Glass Window SB.8950, Replacement Protective Glass - Euromex
Take advantage of a genuine replacement designed for reliable protection and uninterrupted observation: the protective glass preserves the inspection area while reducing the risk of contamination, and its exact fit for the StereoBlue range simplifies maintenance. Order the replacement directly via Metav Werkzeuge or consult the specialists for compatibility details. Protective Glass Window for StereoBlue SB.8950 — replacement window for Euromex stereomicroscopes Protective Glass Window for StereoBlue SB.8950 is an intended replacement pane for StereoBlue stereomicroscope systems, providing a protective barrier for the optical path and work area. Protective barrier for optical path Original Euromex replacement part Compatible with StereoBlue series Simple spare-part designation SB.8950 Preserve observation quality by protecting the optical path The replacement pane is specified as a protective glass window for the StereoBlue series and is intended to act as a barrier between the specimen area and the instrument internals. By keeping contaminants and stray particles away from lenses and internal components, the spare part supports consistent optical clarity during routine inspections. For workshops and laboratories where repeated handling occurs, a dedicated protective pane reduces the need for invasive cleaning of the instrument itself and helps maintain repeatable viewing conditions. Minimise downtime with a clearly identified original spare part As an original Euromex spare (SKU SB.8950), the unit simplifies parts management and replacement procedures. The clear designation enables quick procurement and ensures the replacement matches the original specification for the StereoBlue range. Using an identified spare minimises fitment uncertainty and supports efficient maintenance cycles, which is particularly valuable in production or quality-assurance environments where device availability directly affects throughput. Practical handling and maintenance advantages for workshop use The window is designed as a serviceable component, allowing safe removal and reinstatement during routine maintenance without interfering with the core optical system. Keeping a spare protective pane as part of standard workshop inventory reduces interruptions: a replaced pane restores the protected working environment immediately, aiding operational continuity. The component is therefore a practical item to include when establishing a preventive maintenance plan for stereomicroscopes. Trusted supply and clear procurement from a precision partner Sourcing original spare parts through a reliable channel supports operational certainty. Metav combines broad product availability with an established distribution base, delivering precision items to workshops across Europe. The supply chain approach reduces procurement complexity and helps ensure that replacement parts for inspection equipment remain accessible when required, reinforcing both day-to-day reliability and long-term asset care. Contact Metav Werkzeuge for original Euromex spare parts and procurement advice: Metav Werkzeuge GmbH in Emmerich provides expert guidance for spare-part selection and order fulfilment Technical Data Article number: SB.8950 Manufacturer: Euromex Product type: Microscope protective glass SKU: SB.8950 Facts Gallery file size: 52,894 bytes UID: SB.8950 Special features Compatible with StereoBlue series Designation: Protective glass window Category: For stereomicroscopes Label: Schutzglasfenster für StereoBlue SB.8950 FAQ Is this an original Euromex spare part? This is listed as an original Euromex replacement window, designated SB.8950, intended for the StereoBlue series. Will the pane fit any StereoBlue model? The pane is specified for the StereoBlue line; compatibility should be checked against the instrument model to confirm fit for the intended device. What function does the protective window perform? The window serves as a barrier protecting the optical path and specimen area, helping to limit contamination of internal optics. Can the protective window be cleaned or must it be replaced? Routine gentle cleaning of the protective window can extend its service life, while keeping an original spare available ensures a quick swap when replacement is required. How is the spare identified for ordering? The spare is identified by the Euromex designation and SKU SB.8950 to ensure accurate procurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
T2 Adapter 35mm For Nikon D Digital SLR Cameras, Camera-Mount - Euromex
Take advantage of the clear compatibility with Nikon D series and the simple mechanical coupling that enables DSLR imaging on microscopes; order the AE.5025 directly via Metav Werkzeuge or consult the team for application guidance. T2 Adapter for Nikon D Digital‑SLR Cameras AE.5025 — Microscope camera adapter by Euromex T2 Adapter for Nikon D Digital‑SLR Cameras AE.5025 provides a mechanical interface to mount Nikon D series digital‑SLR bodies to microscope optical ports for photographic documentation and analysis. Direct fit for Nikon D bodies Enables DSLR‑microscope coupling SKU AE.5025 for quick identification Stable DSLR coupling for reliable imaging A T2 adapter converts the camera mount into a practical connection between a digital‑SLR and a microscope, allowing photographic documentation without modifying the imaging device. The mechanical interface ensures that the optical axis is maintained, which supports consistent framing and focus when capturing specimens. This characteristic is particularly useful when established camera bodies are repurposed for laboratory imaging, as it preserves existing photographic workflows while integrating with microscopy equipment. Practical compatibility that streamlines workflows Designed for Nikon D series Nikon D digital‑SLR cameras, this coupling element simplifies transitions between photodocumentation and routine microscopy tasks. The adapter reduces the need for proprietary camera heads by enabling the use of standard SLR cameras for measurement imaging or record keeping. Laboratories, educational facilities and quality‑inspection stations benefit from the straightforward compatibility, as the adapter supports efficient image capture and reduces equipment redundancy. Clear identification and ordering for operational continuity The article is listed under SKU AE.5025, which facilitates procurement and stock management. The compact description and explicit compatibility information allow purchasing teams to verify fit before acquisition, reducing lead time in procurement cycles. For small workshops and larger facilities alike, the adapter presents a practical option to expand imaging capability using existing photographic hardware while keeping inventory and documentation concise. For application advice and to confirm availability of the Euromex T2 adapter AE.5025, contact Metav Werkzeuge in Emmerich — Metav’s specialists provide ordering and technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: AE.5025 SKU: AE.5025 Brand: Euromex Product type: Microscope camera adapter Data Compatibility: Nikon D digital‑SLR cameras Special features T2 mounting interface Intended for coupling DSLR cameras to microscopes Label: T2 Adapter for Nikon D Digital‑SLR Cameras AE.5025 FAQ What cameras is the adapter compatible with? The adapter is compatible with Nikon D series digital‑SLR cameras; the T2 Adapter for Nikon D Digital‑SLR Cameras AE.5025 enables mechanical coupling to microscope ports. Can the adapter be used for photomicrography in a teaching lab? Yes. The AE.5025 is suitable for integrating a Nikon D digital‑SLR into teaching‑lab microscopes for documentation and demonstrative imaging. Does the adapter alter the optical properties of the microscope? The adapter provides a mechanical connection and preserves the optical axis; it does not introduce image processing or electronic modification to the optical path beyond the camera coupling. Is the product suitable for professional documentation tasks? The T2 Adapter AE.5025 supports photographic documentation workflows by enabling the use of a full‑frame or APS‑C Nikon D camera for higher‑resolution image capture when linked to a microscope. How is the adapter identified for ordering and stock purposes? The product is listed under SKU AE.5025 and labelled as T2 Adapter for Nikon D Digital‑SLR Cameras AE.5025, simplifying procurement and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
T2 Adapter for Canon EOS Digital-SLR Cameras, Camera Mount - Euromex
Take advantage of a precise mechanical interface and straightforward compatibility for reliable imaging results; the adapter connects Canon EOS digital‑SLR cameras to microscopes with a secure T2 coupling. Order the T2 Adapter for Canon EOS Digital‑SLR Cameras AE.5040 directly via Metav Werkzeuge or ask our consultants if needed. T2 Adapter for Canon EOS Digital‑SLR Cameras AE.5040 — Microscope camera adapter with T2 mount T2 Adapter for Canon EOS Digital‑SLR Cameras AE.5040 is a purpose‑built microscope camera adapter that enables the attachment of Canon EOS digital‑SLR cameras to a variety of microscope systems for documentation and imaging. T2 mount for Canon EOS digital SLR Designed for microscope camera coupling Secure mechanical interface for imaging Stable mechanical coupling for accurate images A robust mechanical connection is essential for reproducible photographic documentation in laboratories and workshops. The T2 adapter offers a simple T‑mount interface that creates a stable connection between a Canon EOS digital‑SLR and the microscope optical path, keeping the imaging axis aligned and minimising unwanted movement. This mechanical stability supports consistent focus and exposure across image series, which is particularly valuable for quality assurance, sample archiving and comparative analysis in inspection workflows. Broad compatibility and straightforward integration Designed as a microscope camera adapter, the unit fits the common T2 mounting standard and is intended for use with Canon EOS cameras and compatible microscope ocular or trinocular ports. The adapter facilitates a low‑complexity setup: the camera is attached via the adapter and the microscope is used in its usual configuration, avoiding time‑consuming modifications. For facilities seeking to digitise microscopes without altering the instrument, this adaptor provides a pragmatic balance of compatibility and operational ease, helping to shorten the time from setup to image capture. Practical benefits for documentation and education Connecting a digital‑SLR to a microscope elevates image quality and control compared with many dedicated microscope cameras, offering flexible sensor choices and familiar camera settings. The adapter supports high‑resolution documentation, enabling detailed records for reports, publications or training materials. By using a standard camera body, users gain access to interchangeable lenses, manual exposure control and established post‑processing workflows, which together improve image versatility and long‑term archiving of visual data. Integration into professional workflows For laboratories, workshops and teaching facilities, the adapter contributes to a reproducible imaging process that aligns with professional documentation standards. The mechanical interface reduces setup variance between sessions and operators, supporting reliable results across projects. When paired with a Canon EOS body, the combination becomes an adaptable imaging solution that benefits inspection routines, R&D tasks and educational demonstrations, enhancing both efficiency and traceability in daily operations. For a reliable microscope imaging solution with the Euromex T2 adapter AE.5040, contact Metav Werkzeuge — our Emmerich‑based specialists will advise on compatibility and supply options to suit the workflow. Technical Data Manufacturer: Euromex Article number: AE.5040 SKU: AE.5040 Product type: Microscope camera adapter Label: T2 Adapter for Canon EOS Digital‑SLR Cameras AE.5040 Image file: AE.5040.jpg Gallery URL: https://plytix-files.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/21/a5/f1/6a/6af1a521d8ecf2f60acae1ad/AE.5040.jpg Facts Image file size: 56083 bytes Gallery id: 6af1a521d8ecf2f60acae1ad Special features Compatibility: Canon EOS digital SLR cameras Mount type: T2 interface for microscope coupling Application area: System camera / microscopy accessories Category path: Microscopy accessories > Cameras > Camera adapters > System camera FAQ What cameras are compatible with this adapter? The adapter is specified for Canon EOS digital‑SLR cameras and provides a T2 interface to pair such camera bodies with microscope optical ports. Does the adapter include additional accessories for mounting? No accessories are specified for the T2 Adapter AE.5040 in the provided product data. Will using this adapter affect the microscope focus? The adapter creates a fixed mechanical coupling; depending on the microscope optical design and whether a projection lens or ocular is used, small focus adjustments may be necessary when mounting a Canon EOS camera. Can the adapter be used with other camera brands or mirrorless systems? The AE.5040 is described for Canon EOS digital‑SLR cameras; adaptation to other brands or mirrorless systems may require additional camera‑specific fittings that are not listed in the product data. Is this adapter suitable for routine laboratory documentation? Yes, the adapter is intended to facilitate high‑quality documentation by linking a Canon EOS camera to a microscope, supporting consistent image capture for laboratory records and reports. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
ZE.1659 Stereomicroscope Head Compatibility Reference, Z-Series - Euromex
Take advantage of a precision stereomicroscope head from Euromex delivered as a clear compatibility reference; its modular role reduces integration uncertainty and supports efficient inspection workflows. Order the Z-Series ZE.1659 directly via Metav Werkzeuge or consult Metav’s specialists for configuration guidance. Z-Series ZE.1659 Euromex stereomicroscope head — compatibility reference The Z-Series ZE.1659 is a Euromex stereomicroscope head offered as a compatibility reference for laboratory and inspection environments, intended for integration into modular optical setups. Euromex Z-Series stereo head Designed as a compatibility reference Suitable for laboratory and inspection setups Streamlined integration for modular systems that saves procurement time The Z-series stereo head is presented principally as a compatibility reference, which streamlines component selection when assembling inspection and laboratory optics. By specifying the head as a reference model, procurement and engineering teams receive a clear marker for mechanical and optical matching, reducing the risk of ordering incompatible components and shortening lead times. This approach supports predictable assembly workflows and helps maintain continuous production and inspection capacity. Clear role in visual inspection delivering predictable outcomes As a stereomicroscope head, the unit is built for binocular observation and visual inspection tasks, where depth perception and three-dimensional viewing are essential. The designation as a reference component suggests suitability for applications such as quality control, electronics inspection and routine laboratory examination. Where a complete optical configuration is required, the head allows modular combination with stands, objectives and illumination modules to create a tailored inspection station that meets specific magnification and working-distance needs. Documentation status and what to expect when specifying the head The available information identifies the product as a Z-series stereomicroscope head with the Euromex part number ZE.1659; however, a full configuration is not described in the supplied documentation. This means that specific details such as magnification ranges, working distance, objective options and integrated lighting are not listed in the source file. When specifying the unit, plan for modular selection of objectives and accessories to achieve the desired optical performance rather than relying on a preconfigured eyepiece–objective assembly. Benefits for workshops and laboratories seeking reliable modularity Selecting a reference stereo head supports a pragmatic, modular procurement strategy: optical systems can be assembled to match application requirements while keeping replacement parts and upgrades standardised. The modular character of the head reduces long-term maintenance complexity and supports predictable spare-part planning. For production environments where repeatability and quick turnaround are priorities, the clarity of a reference designation contributes to operational reliability and straightforward inventory control. For purchase and verified compatibility advice, contact Metav Werkzeuge to arrange model-specific configuration support and secure delivery from our Emmerich stock — Metav Werkzeuge can advise on how the Euromex Z-Series ZE.1659 fits into a complete inspection solution Technical data Article number: ZE.1659 SKU: ZE.1659 Manufacturer: Euromex Model series: Z-Series Product type: Stereomicroscope head Label: Z-Serie ZE.1659 Facts Numerical specifications: not provided in source data Configuration details: not specified in source data Special features Listed as a compatibility reference only Full configuration not described in the supplied documentation Intended for modular optical system integration FAQ What is the intended use of this stereomicroscope head? The Z-Series ZE.1659 by Euromex is intended as a binocular inspection head for modular stereomicroscope systems, used where three-dimensional visual inspection and depth perception are required. Are optical specifications such as magnification and working distance available? The supplied documentation does not include detailed optical specifications for the Z-Series ZE.1659; magnification ranges and working-distance values are not provided in the source file. Can the head be combined with different objectives and stands? The designation of the unit as a compatibility reference implies modular use within Z-series systems, allowing combination with appropriate objectives and stands selected to meet application requirements. Is the Z-Series ZE.1659 supplied as a complete microscope? The item is described solely as a stereomicroscope head; the source data does not indicate delivery of a complete microscope or included accessories. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø 23.2mm Alignment Telescope Phase Contrast, iScope IS.9149 - Euromex
Benefit from precise phase-contrast alignment thanks to the IS.9149’s dedicated fit and compact iScope design. Optimised for repeatable phase centring and quick visual checks, this tool streamlines setup and reduces rework on routine microscopy tasks. Order the alignment telescope directly via Metav Werkzeuge or consult their technical advisers for verification. Phasenzentrierteleskop iScope IS.9149 – Alignment telescope for phase contrast, Ø 23.2 mm tube (Euromex) The Phasenzentrierteleskop iScope IS.9149 is a compact alignment telescope intended to centre phase rings within a 23.2 mm eyepiece tube, supporting reliable phase contrast imaging in laboratory and teaching microscopes. Optimised for phase contrast alignment Ø 23.2 mm tube compatibility Compact iScope design for stability Quick visual verification of centring Precise centring for consistent phase contrast imaging An alignment telescope facilitates exact alignment of the condenser phase ring and objective phase plate, which is essential for clean phase contrast images. The IS.9149 fits microscopes with a Ø 23.2 mm tube and provides a clear optical reference for adjusting the condenser and phase ring position. By using a dedicated centring tool, technicians achieve repeatable alignment without resorting to trial-and-error at the specimen plane, cutting setup time and reducing the risk of imaging artefacts. Faster setup and reduced downtime in routine workflows A simple insertion into the eyepiece tube allows immediate visual inspection of the phase ring position; this straightforward procedure translates into measurable time savings during instrument preparation. The alignment telescope removes uncertainty from the adjustment process, enabling staff to return microscopes to productive use faster and maintain consistent results across shifts. For facilities with multiple instruments, standardising alignment with a centring device supports efficiency and reduces training needs. Robust design appropriate for labs and teaching environments The iScope series places emphasis on compactness and stability, making the accessory suitable for frequent handling in both industrial and educational settings. Although the component is small, its mechanical fit and optical clarity are selected to provide dependable performance under daily use. The construction supports routine visual checks, and the compact format simplifies storage alongside other microscopy accessories. Guidance and further information for confident use If additional clarification of compatibility or alignment technique is required, documentation referenced with the product provides further detail on application and procedure. The alignment telescope is described for phase contrast use and noted to fit the Ø 23.2 mm tube standard; users uncertain about suitability for a particular microscope model can request supplementary technical data. Metav Werkzeuge can supply further specifications or advise on integrating the centring tool into standard operating procedures. For reliable phase contrast alignment, consider the Euromex iScope IS.9149 and contact Metav Werkzeuge in Emmerich for tailored advice and prompt dispatch via their technical team Technical Data Article number: IS.9149 SKU: IS.9149 Brand: Euromex Model series: iScope Product type: Alignment telescope for phase contrast Facts Tube diameter: Ø 23.2 mm Special features For phase contrast alignment Fits 23.2 mm eyepiece tube iScope series accessory Source: Education PDF p.25; Life Science PDF p.16,42 FAQ How does the alignment telescope improve phase contrast imaging? The alignment telescope enables precise centring of the phase ring relative to the optical axis; using the IS.9149 ensures the phase ring and condenser are aligned so phase contrast effects are rendered correctly. Which eyepiece tube does this accessory fit? The IS.9149 is specified for a Ø 23.2 mm tube and is intended for microscopes that accept that eyepiece standard. Is the IS.9149 suitable for teaching laboratories? Yes, the compact and robust design of the iScope accessory makes it well suited to teaching environments where frequent, quick alignment checks are required. Will the alignment telescope work with all phase contrast objectives? The IS.9149 supports the alignment process for phase contrast objectives by centring the phase ring; compatibility depends on the microscope’s eyepiece tube and phase contrast installation rather than objective brand. Where can additional technical documentation be obtained? Further technical details and application notes referenced in the product documentation are available; Metav Werkzeuge can provide supplementary data or advise on suitability for specific microscope models. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø51x60mm HD-Mini Microscope Camera 2 MP 1920x1080 60 fps HDMI Digital 0.37x C-Mount, 32 GB Included - Euromex
Benefit from a compact 2 MP sensor with HDMI output and a C‑Mount 0.37x adapter for immediate Full HD documentation; included 32 GB storage and calibration slide enable rapid deployment. Order the HD‑Mini VC.3023 directly via Metav Werkzeuge or consult our specialists if required. HD‑Mini VC.3023 – Microscope camera with HDMI and Sony CMOS sensor The HD‑Mini VC.3023 is a compact microscope camera engineered for live imaging and documentation in laboratory and inspection environments, offering direct HDMI output and C‑Mount compatibility. HDMI output for direct digital display 2 MP resolution, 1920 x 1080 Full HD 60 fps progressive scan for smooth live view Includes 32 GB SD card and C‑Mount adapter Faster inspection with direct Full HD output The HDMI interface and native 1920 x 1080 output reduce setup complexity by enabling immediate display on standard monitors, which streamlines documentation and speeds decision-making in quality control. A 2 MP sensor delivers sufficient detail for routine inspection tasks while keeping file sizes manageable, so capture workflows remain efficient without an elaborate imaging chain. The compact design and C‑Mount adaptability support integration with a wide range of optical heads and trinocular microscopes used in workshop and lab environments. Consistent image quality from a sensitive sensor A Sony CMOS 1/2.8" sensor with pixel size 2.9 x 2.9 µm and a sensitivity of 1300 mV/lux‑sec produces reliable images even at modest illumination levels, reducing the need for intense lighting during delicate inspections. The 12 bits colour depth and progressive scan mode preserve tonal gradation and avoid artefacts in moving subjects, while the 60 fps capability (mode-dependent) supports smooth live viewing for alignment and real‑time evaluation. These traits make the camera suitable for documentation, basic measurement tasks and instructional capture. Ready for immediate use and flexible storage options Delivery includes a 32 GB SD card, C‑Mount 0.37x adapter and adapter rings (30.0 and 30.5 mm to 23.2 mm), together with a calibration slide (10 mm/100), enabling quick setup and reliable scale reference for metrological tasks. Onboard SD storage supports expansion to 128 GB, allowing longer recording or larger image datasets without interruption. Power flexibility (100–240 Vac to 12 Vdc/1 A) and both HDMI and USB connectivity simplify integration into existing inspection benches and documentation stations. Robust operation in typical lab and workshop conditions Designed for stable performance in varied environments, the imaging module operates across a wide temperature range (-10–50°C) and 30–80% relative humidity, making it suitable for both controlled laboratory settings and less forgiving workshop areas. A measured noise level of 42 dB ensures unobtrusive operation during extended use. Progressive scanning and digital output provide dependable frame delivery for measurement work, while the compact mechanical dimensions (Ø51 x 60 mm) permit installation where space is limited. Discuss integration, accessory options and shipping with Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored technical advice and fast supply from our European stock Technical Data SKU: VC.3023 Manufacturer: Euromex Model series: HD‑Mini Product type: Microscope camera Digital output: HDMI Connection: HDMI Core specifications Resolution: 2 MP / 1920 x 1080 Sensor: Sony CMOS 1/2.8" Frame rate: 60 fps (Live view, mode-dependent) Pixel size: 2.9 x 2.9 µm Sensitivity: 1300 mV/lux‑sec Colour depth: 12 bits Format: 1/2.8" HDTV 1080p Noise level: 42 dB Operating temperature: -10–50°C Humidity: 30–80% Power supply: 100–240 Vac to 12Vdc/1A Features & accessories Progressive scan Storage: SD 32 GB included, up to 128 GB Included adapters: 30.0 and 30.5 mm to 23.2 mm Calibration slide 10 mm/100 C‑Mount adapter 0.37x Interface: HDMI and USB FAQ What microscopes is the camera compatible with? The HD‑Mini VC.3023 fits microscopes that accept C‑Mount connections; included adapter rings enable use with common trinocular and inspection heads. Is live video smooth enough for alignment tasks? Yes, the progressive scan sensor and 60 fps capability ensure smooth live viewing suitable for alignment and assembly inspection with the VC.3023. Can recordings be stored directly on the device? Recording to the included 32 GB SD card is supported; the camera accepts SD cards up to 128 GB for extended capture. How does the sensor perform under low light? The Sony CMOS 1/2.8" sensor with 2.9 x 2.9 µm pixels and sensitivity of 1300 mV/lux‑sec provides good performance at moderate illumination, reducing dependence on strong lighting. Is a calibration reference supplied for measurements? A calibration slide (10 mm/100) is included with the VC.3023 to facilitate scale verification and basic metrological checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
λ/4 Plate Slide for Transmitted Illumination Polarisation Models, IS.9612 - Euromex
Combining precise quarter-wave retardation with a quick-action slider, this accessory delivers reliable polarisation control for transmitted-light microscopy, ideal for contrast enhancement and workflow efficiency. Order the Euromex IS.9612 directly via Metav Werkzeuge or request advice from our consultants. λ/4 Plate in Slider for Transmitted-Light Illumination — iScope Polarisation Accessory (Euromex IS.9612) The λ/4 plate in slider for transmitted-light illumination for iScope polarisation models IS.9612 is an optical accessory enabling controlled retardation for polarisation contrast in transmitted-light microscopy. Quarter-wave retardation plate for polarisation contrast Compact slider mount for rapid insertion and removal Compatible with iScope polarisation series Designed to improve transmitted-light imaging consistency Enhanced contrast and controlled retardation for clearer imaging The accessory uses a quarter-wave plate (λ/4) to transform linear into circular polarisation or to introduce a defined phase shift between orthogonal polarisation components. This retardation reduces interference effects and improves visibility of birefringent structures in transmitted-light applications. For laboratory technicians and quality-control staff, the technical advantage is straightforward: better contrast with minimal modifications to the optical path. The slider design allows the optical element to be introduced without dismounting condenser assemblies, preserving alignment and saving time during routine inspections. Workflow advantage from the slider mechanism Fitting the plate in a slider mount provides immediate operational benefits: the element can be engaged or removed in seconds, which supports rapid switching between polarised and non-polarised transmitted-light modes. In production or classroom environments where throughput matters, this accessory reduces downtime and simplifies sample handling. The compact form factor integrates with iScope polarisation units and maintains a consistent optical position, so measurement reproducibility and imaging consistency are supported without complex recalibration. Built for dependable optical performance in microscopy tasks Manufactured to support polarisation contrast methods, the component contributes to repeatable imaging results across microscopy workflows. Its role in transmitted-light polarisation enhances the detection of stress patterns, crystalline structures and fine textural detail in materials and biological specimens. The accessory is therefore suited to research laboratories, industrial inspection benches and educational settings seeking improved visual differentiation of anisotropic features. For further specification details or to verify compatibility with a specific iScope variant, technical consultation is available. Secure the Euromex IS.9612 via Metav Werkzeuge for precise polarisation control and seamless integration into iScope setups; contact Metav Werkzeuge for tailored specification advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: IS.9612 SKU: IS.9612 Brand: Euromex Product type: Microscope illumination accessory Facts File size: 37693 Gallery filename: IS.9612.jpg Category path: Microscopy accessories › Contrast methods › Polarisation Special features Quarter-wave plate (λ/4) in slider for transmitted-light illumination Designed for iScope polarisation models Application: polarisation contrast in transmitted-light microscopy FAQ What is the primary function of the λ/4 plate in this accessory? The λ/4 plate in the Euromex IS.9612 introduces a defined phase retardation to enhance polarisation contrast in transmitted-light microscopy, improving visibility of birefringent details. Which microscope series is this slider designed for? The slider is designed for iScope polarisation models and fits the corresponding transmitted-light illumination path of that series. Can the plate be inserted and removed without realigning the microscope? Yes, the slider mount allows rapid insertion and removal with minimal disturbance to the optical alignment, supporting consistent imaging across sessions. What types of samples benefit most from using this polarisation accessory? Samples exhibiting birefringence—such as crystalline materials, polymers, or stressed transparent components—benefit substantially, as do biological specimens where polarisation reveals structural detail. Is additional calibration required after introducing the plate? Basic checks are recommended, but the slider is designed to maintain optical positioning so extensive recalibration is usually unnecessary. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
λ/4 Plate Slider for Incident Light Illumination Polarisation Models, IS.9612-R - Euromex
Take advantage of precise polarisation control and space-saving integration to enhance reflected-light inspections; the compact slider design ensures quick insertion and repeatable positioning while maintaining optical performance. Order the accessory directly via Metav Werkzeuge or ask our consultants for application advice. Quarter-wave plate slider for reflected-light polarisation — Euromex IS.9612-R The Quarter-wave plate slider IS.9612-R is a precision accessory for polarisation microscopy, designed to introduce adjustable retardation in reflected-light illumination for iScope polarisation models. Quarter-wave plate in slider format For reflected-light illumination Compatible with iScope polarisation models Manufacturer: Euromex, SKU IS.9612-R Improved contrast and polarisation control for reflected-light work A quarter-wave plate (λ/4 plate) is an optical retarder that shifts the phase between orthogonal polarisation components; this converts linearly polarised light into circular polarisation or adjusts the ellipticity of the beam. In reflected-light microscopy, that phase shift can be used to enhance contrast and reveal surface stress or birefringence effects that would otherwise remain hidden. The slider-mounted design permits quick changeover and consistent optical alignment, ensuring that the retardation effect is reproducible from one specimen to the next. Slider format that speeds up routine inspection The slider mechanism integrates the retarder element into standard filter housings or illumination carriers used in polarisation setups, enabling immediate insertion and removal without additional tools. This format supports efficient workflows in production control and research labs where time and repeatability matter. By combining compact physical integration with stable optical positioning, the slider reduces handling time and minimises the chance of misalignment, delivering repeatable positioning and improved throughput during microscope-based inspections. Designed for iScope polarisation systems and reflected-light applications This accessory has been developed for compatibility with iScope polarisation models, matching the mechanical and optical interfaces commonly used in those systems. The element is intended specifically for reflected-light illumination, so it is best suited to surface analysis, metallography and materials inspection tasks where polarisation effects on reflected beams are exploited. The manufactured build and optical finish support consistent results in routine laboratory and quality-assurance environments. Practical benefits for laboratories and technical inspection Choosing a dedicated quarter-wave slider enables targeted enhancement of imaging contrast with minimal modification to existing equipment. Laboratories benefit from a compact, purpose-built optical element that fits into established polarising workflows, offering a clear technical upgrade without the need for extensive reconfiguration. For teams assessing surface features, stress patterns or anisotropic coatings, the component provides a reliable method to make those characteristics more visible under polarisation conditions. For precise polarisation upgrades, order the Euromex quarter-wave plate slider via Metav Werkzeuge or contact our technical consultants at info@metav-werkzeuge.com or +49 2822 7131930 to confirm fit and application details. Technical Data Manufacturer article number: IS.9612-R SKU: IS.9612-R Manufacturer: Euromex Product type: microscope illumination Facts No detailed numerical specifications provided Special features Quarter-wave plate in slider for reflected-light illumination Compatible with iScope polarisation models Category path: Polarisation (microscopy accessory) Image: IS.9612-R.jpg — https://plytix-files.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/1d/a5/f1/6a/6af1a51dd8ecf2f60acae091/IS.9612-R.jpg FAQ What does a quarter-wave plate do in reflected-light microscopy? A quarter-wave plate introduces a phase shift between orthogonal polarisation components; in reflected-light applications the IS.9612-R from Euromex alters polarisation states to enhance contrast and reveal birefringent or stress-related features on surfaces. Is this slider compatible with iScope polarisation models? Yes — the slider is designed for use with iScope polarisation models and fits common reflected-light filter housings used in those systems. Can the quarter-wave slider be used for transmitted-light polarisation? The IS.9612-R is specified for reflected-light illumination; for transmitted-light polarisation applications, check the system requirements and seek a retarder specified for transmitted-light use. How does the slider format benefit routine inspections? The slider format enables rapid insertion and removal with stable optical alignment, delivering repeatable positioning and reduced handling time during inspection processes. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com