Oil Immersion Darkfield Condenser Delphi-X Observer DX.9112, DX.9112 - Euromex
Take advantage of oil‑immersion darkfield illumination and precise integration with the Delphi‑X Observer series for clearer specimen contrast and reliable replacement. Order the condenser or consult Metav Werkzeuge for product matching and delivery. Delphi‑X Observer DX.9112 condenser — oil‑immersion darkfield condenser by Euromex A Delphi‑X Observer DX.9112 condenser designed for darkfield microscopy with oil immersion, engineered to enhance contrast for unstained or low‑contrast specimens in life‑science and materials inspection. Oil‑immersion darkfield illumination Designed for Delphi‑X Observer series Enhanced specimen contrast for low‑visibility samples SKU DX.9112 for exact identification Enhanced contrast through oil‑immersion darkfield optics The condenser is built to provide darkfield illumination using an oil‑immersion interface, which directs scattered light from the specimen into the objective while suppressing background illumination. This optical arrangement delivers high contrast for transparent or weakly absorbing samples, making structures such as fine fibres, particulates and cell boundaries clearly visible without staining. The principle relies on oblique illumination and a properly matched immersion medium to increase the angular range of light reaching the specimen and the objective, resulting in a pronounced bright‑on‑dark appearance that aids both visual inspection and imaging. Reliable fit and identification for Delphi‑X Observer installations Specified for the Delphi‑X Observer family, the accessory is identified as DX.9112 to ensure correct replacement and catalogue matching. The design facilitates integration with the optical path of compatible microscope stands, preserving alignment and illumination geometry essential for consistent darkfield performance. Where system compatibility is critical, the clear SKU and model‑series reference support procurement and inventory control, reducing the risk of incorrect parts and downtime in laboratory workflows. Practical benefits for life‑science and materials applications By enhancing visibility of minute features, the condenser supports a range of tasks from particle detection and cell morphology to quality inspection of fine surface defects. The contrast improvement reduces the need for preparative staining in many cases, speeding sample throughput and protecting sample integrity. For routine laboratory use, the component contributes to reproducible observation conditions and can assist both manual examination and digital documentation workflows when paired with appropriate objectives and cameras. Care and handling to preserve optical performance To maintain the condenser’s performance, standard oil‑immersion handling procedures are recommended: use a microscope‑grade immersion oil compatible with the optics, remove oil promptly after use and clean optical surfaces with appropriate lens tissue and cleaning fluid. Regular inspection for residues and careful mounting within the observer stand will help preserve contrast quality and prevent image artefacts. Proper maintenance prolongs service life and ensures that darkfield illumination continues to deliver the diagnostic detail required in microscopy tasks. Contact Metav Werkzeuge for advice on compatibility and to acquire the Euromex Delphi‑X Observer DX.9112 condenser; email info@metav-werkzeuge.com or call +49 2822 7131930 for consultation and supply from Emmerich Technical Data Article number: DX.9112 Brand: Euromex Model series: Delphi‑X Observer Product type: Condenser Category: Darkfield (microscopy accessory) Facts SKU: DX.9112 UID: DX.9112 Special features Oil‑immersion darkfield condenser Source: Life Science PDF S. 26 Intended for Delphi‑X Observer series FAQ What is the main purpose of this condenser? The Euromex Delphi‑X Observer DX.9112 condenser is intended to provide oil‑immersion darkfield illumination for improved contrast of transparent or low‑contrast specimens. Is the condenser compatible with all Delphi‑X Observer microscopes? Compatibility is indicated by the Delphi‑X Observer series designation; the DX.9112 condenser matches the optical requirements of the Delphi‑X Observer family but system verification is recommended prior to installation. Can other immersion media be used with this condenser? The condenser is specified for oil‑immersion darkfield operation; use of alternative immersion media may alter optical performance and is not recommended without verification. Does the product include mounting hardware or accessories? The description specifies the condenser as the component DX.9112; further included items are not listed and should be confirmed when procuring the Euromex condenser. How should the condenser be cleaned after use? Clean optical surfaces with microscope‑grade lens tissue and appropriate cleaning fluid after removing immersion oil; follow established laboratory procedures to avoid damage. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Pair Of Eyecups EcoBlue EC.6099, For Microscopes - Euromex
Take advantage of the pair of eyecups and ergonomic seal to improve observer comfort and reduce stray light; this cost-effective accessory supports prolonged microscope sessions with minimal adjustment. Order the EcoBlue EC.6099 directly via Metav Werkzeuge or contact their consultants for further advice. EcoBlue EC.6099 microscope eyecups — Euromex replacement eyecups with ergonomic seal EcoBlue EC.6099 eyecups provide a comfortable viewing interface for laboratory and educational microscopes, designed to enhance observer comfort and reduce stray-light intrusion. Pair of eyecups Comfortable seal for prolonged use Reduces stray-light and glare Compatible with standard eyepieces Improved comfort for extended observation sessions The eyecups create a soft barrier between the eye and the eyepiece, helping to reduce fatigue during prolonged use. By providing a consistent eye relief and an enclosed viewing aperture, the accessory delivers a more stable viewing position and reduces the need for constant refocusing. This contributes to sustained productivity in routine inspection, teaching or hobby lab tasks. The robust simplicity of the design makes the eyecups a practical and cost-effective upgrade for any microscope setup where observer comfort is a priority. Better image contrast through stray-light control A closely fitting eyecup reduces peripheral light entering the ocular, which can otherwise lower perceived contrast and introduce distracting glare. The EcoBlue eyecups help to isolate the eye from ambient illumination, improving subjective image clarity for tasks that demand precise visual discrimination. For users working with delicate samples or performing comparative observation, this reduction in stray light supports clearer, more consistent results without changing the optical train of the instrument. Easy replacement and maintenance for laboratory routines Fitted as an accessory to standard eyepieces, these eyecups allow quick replacement and straightforward maintenance, helping to keep workstations hygienic and ready for use. The pair of eyecups is a small, low‑risk investment that reduces wear on original eyepiece rims and offers a straightforward way to standardise the user interface across multiple instruments. For laboratories and teaching environments where several users share instruments, the eyecups make everyday use more comfortable and predictable while simplifying upkeep. For availability and technical guidance on the Euromex EcoBlue EC.6099 eyecups, contact Metav Werkzeuge in Emmerich for local stock information and application advice — Metav Werkzeuge is ready to assist with selection and delivery Technical data Article number: EC.6099 SKU: EC.6099 Manufacturer: Euromex Model series: EcoBlue Product type: Microscope eyecup Label: Mikroskop-Augenmuschel EcoBlue EC.6099 Facts No measurable specifications provided in the data Special features Pair of eyecups Part of EcoBlue series FAQ Are these eyecups supplied as a set or individually? The EcoBlue EC.6099 is supplied as a pair of eyecups suitable for replacing worn ocular guards. Will the eyecups affect the optical performance of the microscope? The eyecups are designed to influence only the observer interface; the EcoBlue EC.6099 does not alter the optical path and instead helps to reduce stray light and improve subjective contrast. How should the eyecups be cleaned? Cleaning recommendations are not specified in the provided data; gentle cleaning with a soft cloth and an appropriate, manufacturer‑recommended cleaner is standard practice for eyecup maintenance. Which microscope eyepieces are compatible with these eyecups? Compatibility varies by eyepiece design; the EcoBlue EC.6099 fits many common oculars, but matching the eyepiece barrel diameter is advised where possible Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Pair Of Eyecups For bScope BS.6099, Pair - Euromex
Take advantage of a genuine replacement pair that matches the bScope series, offering direct compatibility and clear identification by article number BS.6099. Benefit from a straightforward accessory that keeps oculars serviceable and stocked; order replacement eyecups directly via Metav Werkzeuge or consult our team for compatibility advice. Euromex bScope BS.6099 Microscope Eyecup (pair) — Compatible with bScope series The bScope BS.6099 is a pair of microscope eyecups designed for use with the bScope series, intended to fit BS.6010-compatible eyepieces and serve as a reliable replacement accessory for oculars. Pair of eyecups for bScope series Compatible with BS.6010 eyepieces Replacement accessory for oculars Article number BS.6099 Secure fit and clear compatibility for routine microscopy The supplied pair of eyecups offers a direct mechanical fit for microscopes in the bScope range and for eyepieces specified as BS.6010-compatible. This ensures compatibility is explicit at the point of purchase and reduces downtime when standard oculars require replacement. The simple designation by article number BS.6099 makes inventory management and reordering straightforward, supporting efficient tool control in teaching labs and production benches where consistent optical set-up is required. Improved viewing comfort and reduced stray light during observation A dedicated pair of eyecups helps maintain a stable viewing position and contributes to reducing peripheral light intrusion that can affect image contrast. By replacing worn ocular surrounds with a correctly matched accessory, microscope operators regain a consistent eyepoint and seating for the eye, which supports comfort during prolonged inspections and repetitive measurement tasks. The result is a more reliable visual reference for both routine checks and precision work. Fast maintenance and simple replacement to support workflows As a replacement accessory, the eyecups simplify maintenance procedures: worn or damaged ocular surrounds can be swapped quickly without complex tools or alignment steps. This accessory functions as a practical spare part to keep microscopes operational between servicing intervals, helping to maintain throughput in training rooms and workshop environments. Clear labelling and model matching reduce the risk of incorrect parts being fitted and ensure uninterrupted operation. Specification clarity that supports procurement and stock control With a concise product identity and model linkage, the eyecup pair supports organised procurement and stock handling. The connection to the bScope series and the precise article reference allow purchasing teams and instrument technicians to make evidence-based ordering decisions. Metav’s role in distribution provides an additional quality filter for the European market, ensuring that supplied accessories meet expected fit and form requirements. For original Euromex replacement eyecups including the BS.6099, contact Metav Werkzeuge for expert advice and prompt supply from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BS.6099 SKU: BS.6099 Label: Microscope eyecup bScope BS.6099 Facts Model series: bScope Compatibility: BS.6010-compatible eyepieces Product type: Microscope eyecup Special features Pair of eyecups delivered together Replacement accessory for oculars Manufacturer listed as Euromex UID: BS.6099 FAQ What does the BS.6099 eyecup pair fit? The BS.6099 eyecup pair fits eyepieces in the bScope series and is specified for BS.6010-compatible oculars. Can these eyecups be used as a direct replacement for worn ocular surrounds? Yes, the eyecup pair is intended as a replacement accessory for oculars and is identified by article number BS.6099 for straightforward reordering. How are the eyecups supplied? The product is supplied as a pair and is described as a set for microscope oculars in the bScope series. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Pair Of Eyecups For Microscopes NZ.6099 - Euromex
A compact pair of eyecups restores comfortable viewing and shields the eyes from stray light; it is suited as a workshop spare or a quick replacement for worn oculars. Benefit from improved observation comfort and straightforward replenishment — order the item directly via Metav Werkzeuge or consult the product specialists. Pair of eyecups NZ.6099 — microscope eyecup set by Euromex Pair of eyecups NZ.6099 provides discreet eye protection and comfort for microscope eyepieces in laboratory and workshop environments Comfortable eyecups for extended observation Easy push-fit onto standard eyepieces Practical spare for laboratory and workshop use Reduced eye fatigue and improved observation comfort These eyecups are intended to improve eye comfort during prolonged sessions at the microscope by creating a defined viewing aperture that reduces peripheral distractions. The design supports focused observation and can help to minimise unwanted glare and stray light entering the ocular field, which in turn reduces the need for frequent readjustments. For routine inspection work and teaching environments, this small accessory contributes to steadier viewing and a calmer working rhythm. Fast replacement to keep equipment operational As a compact microscope accessory, the eyecups are intended for quick replenishment when original ocular shields become worn. The straightforward fitting reduces equipment downtime and simplifies maintenance routines: a simple replacement restores the former ergonomic conditions without the need for additional tools. Maintaining a set of spares is a practical measure in production and education settings where uninterrupted observation is essential. Practical addition to workshop and laboratory supplies Supplied as a pair, the eyecups serve as a convenient spare part for microscopes and fit naturally into a workshop’s consumable inventory. The item supports efficient workflows by providing a low-effort solution to common comfort and hygiene issues at the ocular; replacing worn eyecups is a small step that keeps instruments comfortable and ready for consistent use. For specific compatibility details or further technical information, refer to the product listing or consult Metav Werkzeuge’s specialists. Order replacement eyecups NZ.6099 from Metav Werkzeuge for swift replenishment and expert advice directly from Emmerich. Technical data Article number: NZ.6099 SKU: NZ.6099 Label: Ein Paar Augenmuscheln NZ.6099 Product type: Microscope accessory Manufacturer: Euromex Facts No numerical specifications provided Special features Pair of eyecups Category: Eyecups / Ocular accessories Intended for use with microscope oculars Image available: NZ.6099.jpg FAQ What is included with the NZ.6099 item? The NZ.6099 is supplied as a pair of eyecups intended for microscope oculars Which microscopes are compatible with these eyecups? The eyecups are designed for attachment to microscope oculars; compatibility depends on the eyepiece diameter and form factor of the instrument Do the eyecups affect optical performance or magnification? Eyecups do not change magnification; the purpose of the NZ.6099 eyecups is to improve viewing comfort and reduce stray light without altering optical properties How should the eyecups be cleaned? Gentle cleaning with a soft, lint-free cloth and mild cleaning agent is recommended; avoid aggressive solvents that could affect surface materials Are the eyecups sold individually or only as pairs? The item is listed and supplied as a pair under SKU NZ.6099 Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Pair Of Eyecups MicroBlue MB.6099, Pair Included - Euromex
Take advantage of a practical pair of eyecups for routine microscopy: the MB.6099 supplies a straightforward replacement for MicroBlue oculars and improves observational comfort without complex installation. Order directly via Metav Werkzeuge or consult our specialists for compatibility details. MicroBlue MB.6099 – Euromex microscope eyecup pair, replacement for MicroBlue series The MicroBlue MB.6099 is a pair of replacement eyecups for microscope oculars, intended to improve user comfort and optical usability during prolonged observation sessions. Pair of eyecups for MicroBlue optics Simple replacement for standard oculars Improves comfort during prolonged use Greater comfort and steadier viewing for extended sessions The eyecup pair provides a measurable benefit for users who spend long periods at the binoculars: the eyecups create a defined eye position and reduce peripheral light intrusion, helping to maintain a stable field of view. As a straightforward microscope accessory for the MicroBlue series, the MB.6099 supports consistent alignment between eye and ocular, which can reduce eye strain and improve repeatability in visual inspections. This functional improvement is particularly relevant in educational and routine laboratory settings where multiple users share instruments. Minimal interruption to workflow through easy replacement Designed as a direct replacement component, the eyecups allow maintenance teams to refresh worn ocular seals with minimal downtime. The exchange process is intended to be rapid, keeping bench time productive and aligning with the goal of efficient workshop operations. The compact nature of the spare parts makes storage and stock management uncomplicated, supporting an orderly supply chain for precision equipment and ensuring microscopes return quickly to service after simple upkeep. Practical choice for teaching and everyday inspection tasks This pair of eyecups suits environments where microscopes undergo frequent use, from classroom demonstrations to routine quality checks. The MB.6099 is presented as a durable consumable that standardises the viewing experience across instruments, contributing to consistent observation conditions and easier operator training. By keeping the ocular interface comfortable and repeatable, the eyecups assist teams in maintaining inspection quality across shifts and operators. For Euromex replacement eyecups and further advice on compatibility, contact Metav Werkzeuge for availability and ordering guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: MB.6099 SKU: MB.6099 Manufacturer: Euromex Product type: Microscope eyecup pair Series: MicroBlue Facts No numerical specifications provided in the dataset Special features Pair of eyecups Replacement for MicroBlue series oculars Suitable as a routine consumable for microscopes FAQ Are these eyecups compatible with all MicroBlue eyepieces? Compatibility depends on the eyepiece design; the MB.6099 is specified for use with the MicroBlue series oculars and fits the standard MicroBlue interface where present. How are the eyecups installed on the oculars? The MB.6099 replaces the existing eyecup by seating on the ocular rim designed for MicroBlue components; the procedure is intended to be quick and to restore the original viewing geometry. Does the delivery include one or two eyecups? The MB.6099 is supplied as a pair of eyecups, covering both sides of a binocular microscope for matched comfort. Can the eyecups be cleaned between users? The eyecups are intended as replaceable parts for routine hygiene practice; cleaning on the bench between uses is feasible but replacement is recommended when wear is evident. Are these eyecups suitable for prolonged professional use? As a standard replacement consumable for the MicroBlue series, the MB.6099 supports ongoing use by restoring consistent ocular contact and user position, which is advantageous in professional and educational settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Pair Of Eyecups Microscope Eyecup IS.6099, Pair - Euromex
Take advantage of the pair of eyecups and precise iScope compatibility to improve viewing comfort and reduce stray light during routine inspections; order the replacement directly via Metav Werkzeuge or consult our advisors for compatibility guidance. iScope IS.6099 Microscope Eyecup (Euromex) — Pair of eyecups, compatible with iScope series iScope IS.6099 is a replacement eyecup designed to enhance user comfort and light exclusion for microscopes in the iScope series. Pair of eyecups included For iScope series microscopes Article number IS.6099 Improved comfort and distraction-free viewing for repetitive tasks The supplied pair of eyecups offers a straightforward way to enhance operator comfort during extended observation sessions. By creating a defined seal around the ocular, the accessory reduces the intrusion of ambient light and helps maintain a stable viewing field, which is particularly beneficial in busy laboratory or classroom environments. The design supports steady head position and ergonomic alignment, contributing to less eye strain across multiple inspections. For workshops and educational settings that demand consistent visual clarity, this eyecup set represents a simple upgrade to everyday microscope ergonomics. Straightforward replacement and assured compatibility with the iScope series Replacement is uncomplicated and intended for the iScope range; the component is identified as IS.6099 for clear reference. The model series reference simplifies inventory and maintenance planning, allowing technicians and facility managers to order the correct spare part without extensive cross-referencing. As a dedicated eyecup set, it restores intended optical geometry after wear or loss, ensuring that the microscope’s oculars continue to deliver reliable performance. The clear labelling reduces downtime and supports efficient spare-part workflows in education and life-science laboratories. Practical handling and maintenance for everyday laboratory use The eyecups are supplied as a matched set, easing replacement for binocular or monocular heads where two ocular seals are required. Maintenance routines benefit from the ability to replace worn eyecups quickly, which helps preserve the original optical alignment and user comfort over the long term. For facilities that prioritise predictable, repeatable results, keeping this accessory in stock contributes to consistent instrument readiness and supports routine quality assurance procedures without complex servicing. Contact Metav Werkzeuge today to request the Euromex iScope IS.6099 eyecup pair or to verify compatibility with existing microscope equipment at your site Technical Data Article number: IS.6099 SKU: IS.6099 Product type: Microscope eyecup Brand: Euromex Model series: iScope Facts Pair of eyecups included Source reference: Education PDF p.24; Life Science PDF p.16 Special features Replacement eyecup for iScope series Label: Microscope eyecup iScope IS.6099 Supplied as a matched pair FAQ What is included with the IS.6099? The IS.6099 package contains a pair of eyecups intended as replacement accessories for compatible microscope oculars. Is the eyecup compatible with non-iScope microscopes? The eyecup is specified for the iScope series; compatibility with other brands or models should be verified by comparing ocular diameters and mounting details before fitting. How does the eyecup improve observation comfort? By forming a consistent seal around the ocular, the eyecup reduces stray light and helps maintain a stable viewing position, which lowers eye fatigue during prolonged use. Can the IS.6099 be kept as a spare to reduce downtime? Yes, keeping the Euromex IS.6099 eyecup pair on hand supports quick replacement and helps ensure microscopes remain ready for immediate use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Pair Of Eyecups Microscope Eyecup, EduBlue ED.6099 - Euromex
Take advantage of a precisely matched pair of eyecups for the EduBlue series to enhance viewing comfort and reduce stray light; the accessory is a straightforward replacement for Euromex microscopes and supports clearer, less fatiguing observation. Order the accessory directly via Metav Werkzeuge or consult our specialists for compatibility details. Microscope eyecup EduBlue ED.6099 — pair of eyecups by Euromex A microscope eyecup EduBlue ED.6099 is designed as a replacement eyecup pair for EduBlue-series microscopes, intended to improve viewing comfort and reduce stray light during extended observation. Pair of eyecups included Compatible with EduBlue series Improves viewing comfort Reduces stray light Better optical focus and consistent observation The eyecup pair is conceived to support steady ocular positioning, which aids repeatable eye placement at the eyepiece and contributes to more consistent focus during routine tasks. By securing the observer’s eye at a defined distance from the eyepiece, the accessory helps to maintain an optimal field of view and reduces distractions from ambient light, an advantage particularly relevant for extended sessions in teaching labs and inspection benches. This results in measurable improvements to observational efficiency and a lower rate of re-adjustment between users. Practical use in education and training environments In classrooms and practical workshops, small accessories make a tangible difference to workflow: the eyecup pair eases long observation periods, supporting reduced eye strain and a calmer working environment. The component is suitable as a readily replaceable spare for shared microscopes in training settings, promoting hygienic rotation of ocular surfaces between shifts; its use helps keep workstation interruptions to a minimum and supports uninterrupted learning and inspection routines. Confidence through reliable sourcing and straightforward integration As a genuine replacement accessory for the EduBlue line, the eyecup pair aligns with a simple parts management approach: keep a small stock to avoid downtime and ensure uninterrupted practical sessions. Metav’s role as a European-quality filter adds logistical certainty and distribution reliability, backed by a broad product range and longstanding customer trust. The combination of straightforward compatibility and dependable supply helps workshops and educational providers maintain consistent operational readiness. For advice on suitability for specific microscopes or to reserve stock of the EduBlue ED.6099 eyecup pair, contact Metav Werkzeuge GmbH in Emmerich for fast, expert guidance and order handling. Technical data Article number: ED.6099 SKU: ED.6099 Brand: Euromex Model series: EduBlue Product type: Microscope eyecup Facts Pack: pair Source reference: Education PDF, pages 29, 38 Special features Compatible with EduBlue microscope series Category: Microscopy accessories › Eyepieces › Eyecups Intended use: replacement eyecup pair for observation comfort FAQ Are these eyecups compatible with Euromex EduBlue microscopes? Yes. The eyecup pair is designed for the EduBlue series and is listed under article number ED.6099 for direct compatibility. How many eyecups are supplied with the article? The delivery comprises a pair of eyecups, providing both oculars needed for a binocular microscope. Do the eyecups help to reduce eye strain during long sessions? The eyecup pair improves ocular positioning and limits stray light, which contributes to reduced eye fatigue during extended observation periods. Is the eyecup pair suitable for classroom or workshop use? Yes. The design is intended as a practical replacement accessory for shared microscopes in educational and workshop environments. How should the eyecups be cleaned? Surface cleaning with a soft cloth and mild detergent is recommended; avoid aggressive solvents and abrasive materials to preserve the eyecup surface. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Pair of Eyecups SB.6099, Microscope Accessory - Euromex
Comfortable viewing, straightforward fitting and improved eyepiece alignment make these eyecups a practical upgrade for routine microscopy. Benefit from a simple spare part that supports consistent observation and streamline procurement via Metav Werkzeuge for fast supply or technical advice if required. A pair of eyecups SB.6099 — Euromex microscope accessory, comfort-focused design A pair of eyecups SB.6099 provides a practical enhancement for microscope eyepieces, improving eye contact and observation comfort in laboratory and teaching environments. Comfortable extended viewing Compatible with standard eyepieces Simple attachment and cleaning Improved comfort and clearer observation for routine tasks The eyecups are designed to reduce stray light and help stabilise the eye position at the eyepiece, which lowers fatigue during extended sessions. This results in more consistent observation conditions, particularly useful when comparing specimens or conducting repeat inspections. For users who perform prolonged visual work, the combination of improved comfort and steadier eye alignment can translate into fewer interruptions and a smoother workflow. Quick fitting and low-maintenance handling to keep benches productive A focus on straightforward attachment means minimal downtime when changing accessories or swapping eyepieces between instruments. The design supports easy cleaning and rapid replacement, traits that reduce handling time in busy environments. Clearances and simple geometry enable hygienic maintenance without special tools; this practical approach supports daily laboratory routines and educational work where frequent cleaning and shared use are common. Practical suitability for education, inspection and light-duty laboratory use Lightweight and purpose-built, these eyecups suit microscopes used in classrooms, workshops and light laboratory inspection. By providing a defined point of contact and modest light shielding, they assist with rapid visual orientation and minimise distractions from ambient lighting. The accessory is a sensible, low-complexity addition for teams seeking dependable visual comfort without changing core optical components. For specification guidance or to source the Euromex eyecups SB.6099 directly, contact Metav Werkzeuge for order and technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 — reliable supply from Emmerich to the workshop bench Technical data Article number: SB.6099 SKU: SB.6099 Brand: Euromex Product type: Microscope accessory Label: Ein Paar Augenmuscheln SB.6099 Facts Image file size: 48786 Image filename: SB.6099.jpg Special features Pair of eyecups Category path: Mikroskopie-Zubehör > Okulare > Augenmuscheln Gallery URL: https://plytix-files.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/1a/a5/f1/6a/6af1a51ad8ecf2f60acadfae/SB.6099.jpg FAQ Are these eyecups compatible with most standard microscope eyepieces? These eyecups (Euromex, SB.6099) are intended as a standard accessory for common eyepiece diameters and are presented as compatible with standard eyepieces used in teaching and light laboratory microscopes. How should the eyecups be cleaned and maintained? Cleaning of the eyecups SB.6099 should be carried out with a soft cloth and mild detergent; avoid aggressive solvents to preserve the surface and fit. Can the eyecups be replaced easily during shared use in teaching settings? Replacement is straightforward for the Euromex eyecups SB.6099; the design supports quick removal and refitting to maintain hygiene between users. What benefits can be expected in prolonged observation sessions? Using eyecups such as the SB.6099 reduces stray light and stabilises eye position, which helps reduce eye strain and supports steadier observations during extended tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Pair Of Object Clamps For Stage 2 Pieces, For Stereo Microscopes - Euromex
Secure specimen handling and repeatable stage positioning are achieved by combining robust clamps with straightforward stage mounting; the result is reliable sample control for routine inspection and educational use. Order the Euromex stage clamps directly via Metav Werkzeuge or ask our consultants for procurement advice. Euromex EduBlue ED.9570 – Pair of Object Clamps for Microscope Stage, for Stereomicroscopes The EduBlue ED.9570 is a pair of object clamps for stage mounting, designed to hold small specimens securely on stereomicroscopes during inspection and manipulation. Pair for stage mounting Suitable for stereomicroscopes Secure specimen holding Simple, repeatable positioning Built for consistent specimen security and repeatability The object clamps provide a straightforward method to secure samples on a microscope stage, reducing movement during observation and minor handling. By keeping the specimen steady, the clamps improve repeatability of visual inspections and measurements, which is particularly important in training environments or quality-control benches. The clamping arrangement is suitable where reliable holding is required without complex fixture systems, supporting efficient workflows across routine laboratory and workshop tasks. Designed to match stereomicroscope workflows Intended for use with stereomicroscopes, the clamps fit into common stage configurations and complement binocular inspection setups. Their function is to maintain specimen position while allowing quick release and repositioning, which shortens handling time and increases throughput for repetitive tasks. The design emphasises practical compatibility rather than unnecessary complexity, making the clamps an effective accessory for both educational settings and precision inspection stations. Practical handling and benefits for everyday use As a small but essential accessory, the pair of clamps simplifies specimen preparation and stabilisation. The arrangement supports delicate components during soldering inspection, biological dissections in teaching, or visual quality checks on small mechanical parts. By providing secure holding, the clamps reduce the risk of specimen loss or damage during handling and contribute to a calmer, more controlled working process—important when consistent visual assessment is required. Procurement confidence and integration into supply chains Sourcing the clamps through an established distributor ensures quality control and reliable delivery. Purchasing via a trusted partner reduces administrative overhead and provides access to a broader range of compatible accessories, which supports effective workshop stocking. The clamps are an economical addition to any microscopy toolkit where secure, repeatable positioning of small items is needed. Contact Metav Werkzeuge for procurement of the Euromex EduBlue ED.9570 and for tailored advice on integrating these clamps into laboratory or workshop setups. Technical Data Manufacturer: Euromex Article number: ED.9570 Model series: EduBlue Product type: Object clamps for microscope stage SKU: ED.9570 Facts Quantity: pair Special features For stereomicroscopes Stage mounting Pair of clamps for specimen securing FAQ What is included with the product? The product is supplied as a pair of object clamps for stage use; the designation is Euromex EduBlue ED.9570. Which microscopes are these clamps suitable for? The clamps are specified for use with stereomicroscopes and are intended to secure small specimens on the stage during observation. Can the clamps be used for precise measurement tasks? The clamps are designed to hold specimens steady to aid visual inspection and repeatable positioning; specific metrological performance depends on the overall setup and stage used. Are mounting details and dimensions provided? Mounting method is indicated as stage mounting; detailed dimensions and fixing specifications are not listed in the provided data. Is the product suitable for educational environments? The pair of clamps is well suited to teaching and demonstration contexts where reliable specimen holding and rapid handling are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Pair of Specimen Clamps for Standard Stage, Microscopy Accessory - Euromex
Take advantage of a compact, purpose-built clamp set that ensures secure specimen holding on standard stages while simplifying sample changes; order the pair directly via Metav Werkzeuge or consult our specialists for compatibility queries. Pair of Specimen Clamps for Standard Object Table NZ.9570 – Euromex microscope specimen clamp, for stereomicroscope stages Pair of Specimen Clamps for Standard Object Table NZ.9570 provides stable sample fixation for stereo inspection and workshop measurement tasks on a standard object table Pair for standard object table Designed for stereomicroscope stages Microscope specimen clamp, Euromex NZ.9570 Reliable sample holding for routine inspection Stable positioning that speeds up inspection workflows The specimen clamps are designed to secure samples quickly on a standard object table, cutting the time needed for repeated adjustments. The paired clamps allow for two-point fixation, which improves lateral stability during stereo observation or when performing minor manipulations. This steadiness translates into fewer refocusing cycles and less reorientation of the sample, increasing throughput in routine inspection tasks and small-batch quality checks. Seamless compatibility with stereomicroscope stages Compatibility with stereomicroscope stages is an essential practical benefit of this clamp set. The clamping geometry fits standard stage slots and common stage edges used in benchtop microscopy, enabling immediate integration without modifications. That compatibility reduces setup complexity and avoids the need for custom adapters, meaning the clamp set can be introduced into existing inspection rigs with minimal interruption to production or laboratory routines. Practical advantages for workshop and laboratory environments Beyond secure holding, the design supports rapid specimen changes and repeatable positioning, which is particularly useful for comparative inspections and educational demonstrations. The compact nature of the clamps keeps the working area accessible and visible under low magnification, while the paired configuration assists with orienting irregularly shaped parts. Where recording or measurement follows visual inspection, the predictable fixture behaviour contributes to consistent imaging and reproducible results. For secure specimen handling, choose the Euromex NZ.9570 pair via Metav Werkzeuge — contact Metav Werkzeuge GmbH for ordering or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: NZ.9570 SKU: NZ.9570 Brand: Euromex Product type: Microscope specimen clamp Facts Pieces: 2 (pair) Special features Compatible with stereomicroscope stages Suitable for standard object table Pair configuration for two-point fixation FAQ Are these clamps suitable for all stereomicroscopes? The Euromex NZ.9570 clamps are designed for compatibility with standard stereomicroscope stages; compatibility with a specific model depends on the stage design and slot dimensions. How are samples fixed with the clamp pair? Samples are held by two clamping points that provide lateral stability and repeatable positioning for routine inspection and small manipulations. Is the material or coating specified for these clamps? The available product information lists the item as a pair of specimen clamps; specific material or coating details are not provided in the data set. Can these clamps be used for comparative imaging and measurement tasks? Yes, the paired configuration and standard-stage compatibility make the clamps suitable for comparative inspections, imaging and repeatable measurement setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Pair of Specimen Clips for StereoBlue SB.9570, Precision Mounting - Euromex
Take advantage of a compact, OEM accessory that ensures stable specimen holding and clear identification for procurement — the Pair of Specimen Clamps for StereoBlue SB.9570 offers straightforward compatibility with StereoBlue stereomicroscopes; order directly via Metav Werkzeuge or consult our team for precise fit guidance. Pair of Specimen Clamps for StereoBlue SB.9570 — Microscope Accessory by Euromex The Pair of Specimen Clamps for StereoBlue SB.9570 is an accessory designed to provide reliable specimen holding for StereoBlue stereomicroscopes in laboratory and workshop environments. Pair for StereoBlue stereomicroscopes Euromex original accessory SKU SB.9570 for easy ordering Stable specimen holding for repeatable observations The supplied pair of specimen clamps is configured to secure small samples reliably under a stereomicroscope, reducing unintended movement during inspection and manipulation. By keeping the object steady, the clamps contribute to improved visual inspection and more consistent measurement or documentation results. For users working across multiple samples, the accessory supports reproducible positioning, which reduces rework and speeds up routine workflows. Clear compatibility and simple procurement Designed specifically for StereoBlue models, the clamps are identified as SB.9570, simplifying ordering and parts management. The original Euromex accessory designation helps procurement teams and instrument technicians to match components unambiguously, minimising downtime caused by part uncertainty. Where mounting standards or adapter requirements exist, the explicit compatibility note supports fast verification and integration into existing microscopy setups. Practical accessory for everyday microscopy tasks As a dedicated microscope accessory, the pair of clamps complements common laboratory and workshop tasks such as sample preparation, delicate handling, and visual quality checks. The straightforward design focuses on the core benefit of secure holding without introducing unnecessary complexity, making it suitable for routine inspections and educational use alike. Where precise observation is essential, these clamps help maintain focus stability and reduce the need for repeated adjustments. For original Euromex SB.9570 specimen clamps and expert advice on compatibility, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm fit and arrange prompt supply Technical Data Article number: SB.9570 Manufacturer: Euromex Product type: Microscope specimen clamp SKU: SB.9570 Facts Compatible with StereoBlue stereomicroscopes Special features Pair of specimen clamps Euromex original accessory Category: For stereomicroscopes – microscopy accessories FAQ Which microscopes are these clamps compatible with? The clamps were supplied as an accessory for StereoBlue stereomicroscopes and are identified as SB.9570, indicating direct compatibility for StereoBlue models. Are the clamps supplied as a set? Yes, the product is a pair of specimen clamps, provided together for simultaneous use or for keeping a spare. Can these clamps improve observation stability? The clamps are intended to secure specimens under a stereomicroscope, helping to reduce movement and enabling steadier visual inspection with the StereoBlue setup. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Phasecentred Telescope Achios-X Observer AX.9148 - Euromex
Benefit from the phase‑centred optical design and series compatibility: the Achios‑X Observer AX.9148 improves contrast for transparent, unstained samples while supporting consistent alignment within phase‑contrast workflows. Order the AX.9148 directly via Metav Werkzeuge or consult our specialists for integration advice. Achios‑X Observer AX.9148 Phase‑centred telescope by Euromex The Achios‑X Observer AX.9148 is a phase‑centred telescope engineered for phase contrast microscopy, intended to enhance image contrast of unstained, transparent specimens in research and routine laboratory environments. Phase‑centred optical design Compatible with Achios‑X Observer series Optimised for unstained specimens SKU AX.9148 for easy identification Improved contrast for unstained, transparent samples The phase‑centred telescope uses an optical layout that is specifically targeted at extracting phase differences from transparent specimens. By emphasising phase shifts rather than amplitude, the module delivers enhanced contrast for live cells and thin sections without staining. This benefit reduces the need for additional sample preparation and allows clearer observation of structures that would otherwise be difficult to discern. The result is a tangible productivity gain in microscopy tasks that rely on visual clarity rather than chemical contrast. Consistent alignment and dependable imaging workflow Designed as a component within the Achios‑X Observer series, the unit supports reproducible optical alignment and stable imaging across sessions. The phase‑centred approach assists technicians and researchers in maintaining a stable phase ring match between condenser and objective, which translates into fewer adjustments and less downtime. Laboratories benefit from smoother workflows and predictable results, particularly in routine quality checks or time‑lapse observations where consistency is essential. Practical laboratory advantages and applicability As an accessory for phase contrast setups, the telescope is suitable for educational, clinical and research settings where non‑invasive observation is required. The device emphasises precision and repeatability, supporting a range of common microscopy tasks without altering specimen integrity. Integration into existing phase‑contrast systems is straightforward when compatibility with the Achios‑X Observer series is observed, enabling teams to focus on analysis rather than instrument troubleshooting. Contact Metav Werkzeuge to discuss how the Euromex Achios‑X Observer AX.9148 can be integrated into existing microscopy equipment; Metav Werkzeuge’s consultants are available to advise on compatibility and configuration via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: AX.9148 Manufacturer: Euromex Model series: Achios‑X Observer Product type: Phase‑centred telescope SKU: AX.9148 Category: Phase contrast Facts No numeric specifications provided Special features Phase‑centred optical design Intended for phase contrast microscopy Part of the Achios‑X Observer series FAQ What is the primary purpose of this phase‑centred telescope? The phase‑centred telescope AX.9148 is intended to enhance contrast in phase contrast microscopy, making transparent, unstained samples easier to observe. Is the AX.9148 compatible with standard phase contrast condensers? Compatibility is expected within the Achios‑X Observer series; the AX.9148 is designed to integrate with phase contrast setups of that family. Which sample types benefit most from the phase‑centred design? Live cells, thin tissue sections and other transparent specimens gain the most from the phase‑centred optical approach of the AX.9148. Who manufactures the Achios‑X Observer AX.9148? The Achios‑X Observer AX.9148 is produced by Euromex and supplied as part of the Achios‑X Observer series. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Phasenkontrast Accessory iScope IS.9161 Phase Contrast Slider Set with 20x and S100x Oil PLPH Objectives - Euromex
Take advantage of the combination of precise phase contrast imaging, compatibility with 20x and S100x oil PLPH objectives, and straightforward integration into iScope microscopy workflows. Order the accessory directly via Metav Werkzeuge or consult their specialists for technical guidance. Phase contrast accessory iScope IS.9161 — Slider set with annuli for 20x and S100x oil PLPH objectives (Euromex) The Phase contrast accessory iScope IS.9161 provides phase contrast capability for compatible iScope microscopes, enabling high-contrast observation of unstained, transparent specimens using specified oil PLPH objectives. Compatible with 20x and S100x oil PLPH objectives Includes phase contrast annuli for precise imaging Designed for iScope microscope series Enables high-contrast live cell observation Improved visibility for transparent samples without staining Phase contrast converts optical phase shifts produced by transparent structures into intensity differences, allowing clear visualisation of cells and thin sections without dyes. The supplied annuli are matched to oil PLPH objectives at 20x and S100x magnifications, which preserves specimen integrity and reduces preparation time. For laboratory workflows where sample preservation and rapid observation matter, this accessory offers a direct technical route to enhanced contrast and reliable morphological assessment. Seamless integration with iScope optics for routine workflows The slider set is engineered for compatibility with the iScope series and accepts the corresponding oil PLPH objectives, ensuring correct alignment of condenser annuli and objective phase rings. Correct pairing of annulus and objective minimises halo artefacts and optimises contrast, which is particularly beneficial in teaching laboratories and diagnostic routines. The configuration supports consistent imaging results and faster setup, reducing downtime between observations and improving throughput. Practical benefits for live-cell and diagnostic applications By enabling phase contrast on existing microscopes, the accessory supports non-invasive monitoring of living cultures and dynamic processes in real time. The combination of matched annuli and oil PLPH objectives enhances edge definition and detail resolution for thin, low-contrast specimens. This accessory is therefore well suited to applications where sample viability and quick decision-making are priorities, delivering technical advantage through targeted optical matching rather than electronic image processing. For phase contrast applications requiring matched 20x and S100x oil PLPH performance, contact Metav Werkzeuge for ordering and technical advice: info@metav-werkzeuge.com, +49 2822 7131930 — Metav’s specialists will assist with compatibility checks and delivery. Technical data Article number: IS.9161 Manufacturer: Euromex Product type: Phase contrast accessory Series: iScope Facts Compatible magnifications: 20x; S100x (oil PLPH) Includes annuli for 20x and S100x oil PLPH objectives Special features Phase contrast slider set Annuli matched to 20x / S100x oil PLPH objectives Source: Life Science PDF, pages 16 and 42 FAQ What objectives are supported by this accessory? The phase contrast accessory iScope IS.9161 is supplied with annuli matched specifically to 20x and S100x oil PLPH objectives for correct phase alignment. Can the accessory be used for live-cell observation? Yes, the slider set supports non-invasive live-cell and culture monitoring when used with the matching oil PLPH objectives, allowing dynamic processes to be observed without staining. Is the accessory compatible with all iScope microscope models? The accessory is designed for the iScope series; compatibility depends on the microscope’s condenser and objective configuration—check the iScope specifications to confirm alignment. Does the set include both annuli and objectives? The accessory includes the phase contrast annuli matched to 20x and S100x oil PLPH objectives; objective availability should be verified separately if not already present on the microscope. How does correct annulus-objective pairing affect image quality? Proper pairing of annuli and objective phase rings reduces halo artefacts and improves contrast and edge definition, which is essential for accurate morphological assessment. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Phasenkontrast Kit bScope BS.9126 Zernike Phase Contrast Objectives and Condenser - Euromex
Take advantage of the combination of precise Zernike optics, an infinity-corrected objective set and a rotating condenser for reliable phase contrast imaging — order the kit via Metav Werkzeuge or consult our specialists for compatibility advice. Phase contrast kit bScope BS.9126 — Zernike objectives with rotating condenser (Euromex) The Phase contrast kit bScope BS.9126 converts standard upright microscopes into a robust phase contrast system for observing unstained, transparent biological specimens; the kit is intended for laboratory and educational microscopy where enhanced contrast and optical fidelity are required. Zernike phase contrast optics included Infinity-corrected phase objectives Rotating condenser for precise alignment Green contrast filter and telescope See fine internal detail in unstained samples Phase contrast imaging emphasises optical path differences in transparent specimens, making subcellular structures visible without staining. The kit uses Zernike phase optics to boost image contrast while preserving specimen integrity, which reduces preparation time and avoids potential artefacts from dyes. For laboratories aiming for faster workflows, this approach supports clearer visualisation of live cells and thin tissues with minimal intervention. Compatibility with modern optical systems and stable imaging The supplied plan PLPHi 10/20/40 and S100x oil phase objectives are infinity-corrected, ensuring optical compatibility with contemporary microscope stands that use infinity optics. Infinity correction maintains flat fields and consistent parfocality across magnifications, which improves ease of use during multi-objective observations and simplifies camera integration for documentation. The result is reliable, repeatable imaging across routine tasks. Accurate alignment for repeatable phase contrast Correct phase contrast requires precise matching of condenser and objective phase rings; the included rotating condenser and telescope assist optical alignment, allowing the phase ring and annulus to be centred quickly. The green filter sharpens contrast at typical brightfield wavelengths, improving image stability and reducing chromatic mismatch. Together these elements minimise set-up time and support consistent results across users and sessions. Practical range and laboratory benefits With objectives covering low to high magnifications, including a 100x oil objective for high-resolution work, the set extends the capabilities of an existing microscope without extensive hardware changes. The kit supports a range of applications from live-cell observation to routine diagnostic checks, helping laboratories increase functionality while keeping workflows straightforward and serviceable. Contact Metav Werkzeuge for tailored compatibility checks and ordering of the Euromex Phase contrast kit bScope BS.9126 — technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: BS.9126 SKU: BS.9126 Brand: Euromex Model series: bScope Product type: Phase contrast kit Label: Phasenkontrast-Set bScope BS.9126 Numeric data Objectives included: PLPHi 10x, PLPHi 20x, PLPHi 40x, S100x oil Magnifications covered: 10×, 20×, 40×, 100× (oil) Special features Zernike rotating condenser Telescope for alignment Green contrast filter Infinity-corrected phase objectives Plan PLPHi and IOS objective design Source: Life Science PDF p. 9 FAQ What does phase contrast allow that brightfield does not? Phase contrast emphasises refractive-index differences in transparent specimens; the Euromex Phase contrast kit bScope BS.9126 enhances visibility of fine internal structures without staining. Which objectives are included in the kit? The kit contains plan PLPHi 10x, 20x and 40x phase objectives and an S100x oil phase objective for high-magnification work. Is the kit suitable for microscopes with infinity optics? Yes — the set uses infinity-corrected phase objectives (IOS), so the optics are compatible with microscopes designed for infinity systems. Does the 100x objective require immersion oil? Yes, the S100x oil objective is an oil-immersion lens and must be used with appropriate immersion oil for correct imaging. Are alignment components included to set up phase contrast? Yes, the package includes a Zernike rotating condenser, a telescope for alignment and a green filter to assist correct setup and improve contrast. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Phasenkontrast Kit bScope BS.9162 Phase Contrast Kit with Abbe Condenser and Plan PLPH i 10/40x Objectives - Euromex
Benefit from enhanced optical contrast thanks to the integrated Abbe condenser and the supplied Plan PLPH i 10× / S40× infinity-corrected phase objectives, which together provide dependable visualisation of unstained, transparent specimens. The slider with 10× and 40× annuli plus telescope and green filter permit quick configuration and consistent results. Order the Phase contrast kit directly via Metav Werkzeuge or consult our specialists for application advice. Phase contrast kit bScope BS.9162 — Abbe condenser with 10×/40× phase objectives (Euromex) The Phase contrast kit bScope BS.9162 is a complete optical accessory set for introducing phase contrast into compatible compound microscopes, designed for improved visualisation of transparent samples in teaching and routine laboratory work Abbe condenser with slider slot Plan PLPH i 10× and S40× phase objectives Slider with 10× and 40× annuli Includes telescope and green filter Clearer imaging of transparent specimens for reliable observations The kit combines an Abbe condenser with a dedicated slider and matched annuli to convert phase shifts in transparent samples into observable contrast. The use of Plan PLPH i 10× and S40× infinity-corrected objectives ensures that the optical path remains consistent with modern infinity optics, improving image flatness and edge definition compared with simple finite systems. For users seeking technical clarity, the included annuli are matched to the objectives to maintain phase alignment, so phase contrast is achieved without complex additional adjustments. This leads to more efficient analyses and fewer repeat examinations. Easy integration and fast set-up for routine workflows Assembly and alignment are straightforward: the condenser has a slot for the slider, and the kit contains the necessary annuli plus a telescope and green filter to fine-tune contrast. The telescope assists in aligning the annuli with the objective back focal plane, while the green filter standardises illumination for clearer phase tones. Together these components reduce setup time and minimise downtime between brightfield and phase contrast modalities. For practical workflows, this means quicker transitions during teaching sessions or sample processing, improving throughput without sacrificing image quality. Robust optical components for consistent laboratory results The components are engineered for repeated use in instructional and light‑duty laboratory environments. The infinity-corrected phase objectives maintain compatibility with modern microscope stands that employ infinity optics, supporting stable performance across routine use. While this kit focuses on optical enhancement rather than mechanical upgrades, the matched parts deliver dependable contrast enhancement, aiding in the detection of fine structures in cells and thin samples. For laboratories requiring reliable phase contrast without extensive retrofitting, the set provides a compact, purpose-built option. Contact Metav Werkzeuge for tailored advice on integrating the bScope BS.9162 into existing microscope systems and for guidance on objective–annuli matching; e‑mail info@metav-werkzeuge.com or call +49 2822 7131930 for application support and ordering assistance. Technical data Article number: BS.9162 Manufacturer: Euromex Model series: bScope Product type: Phase contrast kit SKU: BS.9162 Label: Phasenkontrast-Set bScope BS.9162 Facts Objectives: Plan PLPH i 10×, S40× (infinity-corrected) Annuli: 10× and 40× Special features Abbe condenser with slot for slider Slider with 10× and 40× annuli Telescope for annulus alignment Green filter for standardised illumination Designed for phase contrast applications FAQ What components are included in the kit? The kit includes an Abbe condenser with a slider slot, Plan PLPH i 10× and S40× infinity-corrected phase objectives, a slider with 10× and 40× annuli, a telescope and a green filter, all supplied as a matched set for phase contrast. Which magnifications are provided by the supplied objectives? The supplied objectives offer 10× and 40× magnifications (Plan PLPH i 10× and S40×), together with corresponding annuli for phase contrast operation. Is the set compatible with infinity optical systems? Yes, the Plan PLPH i and S40× items are described as infinity-corrected, making the kit suitable for microscopes that use infinity optics and support an Abbe condenser. What types of samples benefit most from this kit? The set is intended for transparent, unstained specimens where phase differences are subtle; it enhances contrast to make intracellular structures and thin samples easier to observe with conventional transmitted light microscopes. How do the telescope and green filter support alignment? The telescope assists in aligning the annuli with the objective back focal plane, while the green filter standardises illumination to produce stable, reproducible phase tones for clearer imaging. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Phasenkontrast Kit bScope BS.9163 Phase Contrast Condenser Slider 20x/100x Objectives - Euromex
Take advantage of the combination of reliable optical components and precise phase contrast annuli for clear imaging of transparent specimens; order the kit directly via Metav Werkzeuge or contact our consultants for technical guidance. bScope BS.9163 Phase Contrast Kit – Abbe condenser, infinity-corrected phase objectives The bScope BS.9163 is a phase contrast kit for transmitted-light microscopy that supplies an Abbe condenser with a slider slot, infinity-corrected phase objectives and essential accessories for enhanced specimen contrast. Abbe condenser with slider slot Infinity-corrected Plan PLPHi objectives Slider with 20x and 100x annuli Enhanced contrast for transparent specimens with phase optics Designed to convert subtle phase shifts into visible contrast, the kit centres on an Abbe condenser with a dedicated slot for the phase slider. The combination of condenser and matched annuli ensures that phase differences in transparent samples are translated into sharp intensity variations, enabling reliable visualisation of live cells, unstained tissues and thin sections. The presence of infinity-corrected optics reduces aberrations when used with modern trinocular microscope systems, so the optical train remains stable under different tube lens configurations and camera setups. Precision objectives for detailed observation at high magnification This set includes Plan PLPHi objectives configured for phase contrast, covering medium and high magnification ranges including an oil immersion 100x option for maximum resolution. The objectives are corrected for flatness (Plan) to maintain field uniformity across the image and are optimised for the phase annuli supplied on the slider. The matched 20x annulus and 100x annulus enable quick switching between routine overview and fine-detail inspection without compromising optical alignment, supporting efficient workflows in laboratories and teaching environments. Practical accessories to support imaging and alignment A small telescope and a green filter are included to facilitate alignment and enhance contrast during observation: the telescope aids in aligning condenser annuli with objective phase rings, while the filter improves image definition by restricting illumination to a central wavelength, reducing chromatic effects. These accessories simplify setup and help maintain reproducible imaging conditions, which is particularly valuable when integrating a camera or when different operators need consistent results across sessions. Compatibility and application benefits for routine microscopy The kit is intended for transmitted-light microscopes that accept an Abbe-type condenser and benefit most from phase contrast when examining unstained or weakly absorbing specimens. The infinity-corrected design means compatibility with modern microscope stands and digital imaging systems; optical corrections reduce the need for time-consuming recalibration between magnifications. As a result, laboratories can expect more efficient sample throughput and clearer documentation of subtle structures without additional staining steps. Contact Metav Werkzeuge for personalised advice on the bScope BS.9163, stock availability and delivery from Emmerich – expert guidance and fast processing directly from our warehouse Technical Data Article number: BS.9163 Brand: Euromex Model series: bScope SKU: BS.9163 Product type: Phase contrast kit Facts Objectives: Plan PLPHi 20x / 100x oil (infinity-corrected) Condenser: Abbe condenser with slider slot Annuli: 20x annulus and 100x annulus Included accessories: telescope, green filter Special features Phase contrast configuration for transmitted-light microscopy Infinity-corrected optics for modern microscope systems Plan objectives for flat-field imaging Oil immersion option for highest resolution FAQ Which components are included in the kit? The kit contains an Abbe condenser with a slider slot, Plan PLPHi phase objectives including 20x and 100x (oil) options, a slider with the corresponding annuli, a telescope and a green filter. Is the 100x objective oil immersion? Yes, the 100x objective supplied in the BS.9163 set is an oil immersion, designed for high-resolution phase contrast work. Can the phase kit be used with digital cameras? The infinity-corrected design of the included objectives facilitates integration with modern camera systems and camera adapters without significant optical modifications. What specimen types benefit most from this configuration? Unstained, transparent specimens such as live cells, thin tissue sections and microorganisms benefit most from phase contrast enabled by the supplied annuli and condenser. Does the kit require special alignment? Initial alignment is recommended; the included telescope and green filter assist in matching the condenser annuli to the objective phase rings for optimal contrast and reproducible imaging. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Phasenkontrast Set iScope IS.9124 Zernike Phase Contrast With Rotating Disc PLPH Positions - Euromex
The combination of Zernike phase contrast optics and a rotating condenser disc delivers consistent contrast enhancement across standard objectives, while integrated brightfield and darkfield positions increase versatility in one module. Order the phase contrast set directly via Metav Werkzeuge or consult the Metav team for application support. Phase contrast set iScope IS.9124 – Zernike phase disk with rotating condenser for PLPH objectives by Euromex Phase contrast set iScope IS.9124 provides Zernike phase contrast via a rotating condenser disc, enabling brightfield and darkfield positions for classroom and routine laboratory microscopy. Zernike phase contrast disk for enhanced contrast Rotating condenser disc for fast position switching Compatible with PLPH 10, 20, 40, 100 objectives Brightfield and darkfield positions included Consistent, high-contrast imaging for transparent samples Phase contrast is a proven optical method for visualising unstained, transparent specimens. The module uses Zernike phase contrast to convert phase shifts in light passing through a specimen into amplitude differences that the eye or camera perceives as contrast. This means delicate structures in cells and thin tissues become visible without dyes, reducing sample preparation and preserving live specimens. The integrated design supports routine microscopy tasks in education and life-science workflows, delivering repeatable image quality and clearer visual assessment during observation and documentation. Quick switching and straightforward integration into existing microscopes A rotating condenser disc allows rapid switching between phase positions and conventional illumination modes, so workflows remain efficient when alternating between techniques. The disc includes dedicated positions for brightfield and darkfield, as well as aligned apertures for PLPH objectives at 10, 20, 40 and 100 magnifications, ensuring optical matching and minimising alignment effort. The modular unit is intended for compatibility with common research and teaching microscope stands, streamlining retrofitting or upgrades and reducing downtime in the classroom or microscopy suite. Built for teaching and routine laboratory use with reliable optics Designed with educational and routine life-science applications in mind, the set combines practical robustness with optical precision. The phase contrast configuration improves contrast without staining, which is particularly valuable for live-cell observation and repetitive teaching demonstrations. The iScope IS.9124 provides a cost-effective way to extend a microscope’s capabilities while maintaining clarity and reliability, supporting consistent results across sessions and users. For technical advice or to procure the phase contrast set, contact Metav Werkzeuge for application guidance and supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: IS.9124 SKU: IS.9124 Brand: Euromex Model series: iScope Product type: Phase contrast set Facts Compatible objective magnifications: PLPH 10 / 20 / 40 / 100 Included illumination modes: Brightfield, Darkfield Optical method: Zernike phase contrast Special features Rotating condenser disc for fast position switching Zernike phase contrast apertures Application: Education, Life Science microscopy Source: Education PDF S.25; Life Science PDF S.16,42 FAQ What objectives are supported by the phase contrast set? The phase contrast set supports PLPH objectives at 10, 20, 40 and 100 magnifications and is designed to match those aperture sizes for optimal contrast. Can the module switch between phase contrast and brightfield quickly? Yes, the rotating condenser disc of the module permits rapid switching between Zernike phase contrast, brightfield and darkfield positions for efficient workflow changes. Is the set suitable for live-cell observation in teaching laboratories? The phase contrast module is well suited to live-cell work and teaching demonstrations because it enhances contrast without the need for staining. Does the iScope IS.9124 require recalibration after fitting? Alignment is simplified by the matched PLPH positions on the rotating disc, but minor optical alignment may be needed depending on the microscope stand and objective set used. Which applications benefit most from this phase contrast configuration? Applications in education, cell observation and basic life-science routines benefit from improved visibility of unstained specimens provided by the Zernike phase contrast set. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Phasenkontrast Set iScope IS.9127 Zernike Phase Contrast Disc PLPH 10/20/40/100 - Euromex
Take advantage of enhanced contrast, fast switching between imaging modes and compatibility with standard phase ports to streamline specimen evaluation; order directly via Metav Werkzeuge or consult our specialists for application advice. Phasenkontrast-Set iScope IS.9127 — Zernike phase contrast set with rotating disc and PLPH 10/20/40/100 The Phasenkontrast-Set iScope IS.9127 is a Zernike phase contrast kit for transmission microscopes, featuring a rotating disc with PLPH 10/20/40/100 positions and selectable brightfield and darkfield settings. Zernike phase contrast configuration Rotating disc with PLPH 10/20/40/100 Brightfield and darkfield positions Clearer images of unstained, transparent specimens The Zernike phase contrast principle used in this kit converts subtle phase shifts in transparent samples into visible intensity differences, allowing reliable visualisation without staining. The rotating disc works with common PLPH phase ports for 10/20/40/100 objectives, so contrast enhancement is achieved while preserving sample integrity. This reduces preparation time and preserves delicate structures, making it easier to evaluate live cells and thin sections under a transmission microscope. Faster workflow through quick mode switching A rotating disc with dedicated positions for phase, brightfield and darkfield streamlines routine examination by eliminating frequent component changes. Switching between imaging modes is immediate and reproducible, which supports higher throughput in teaching labs and life‑science workflows. The modular arrangement lowers the risk of misalignment and ensures consistent results across multiple users, improving efficiency in both educational and research settings. Practical kit design for education and laboratory use The configuration supplied is prepared for straightforward installation into standard phase ports and is documented in educational and life‑science references. The set (SKU IS.9127) supports reproducible contrast adjustment and stable imaging, which is beneficial for repeated demonstrations and comparative studies. The combination of practical mode selection and compatibility with PLPH phase objectives makes the kit a dependable choice for classrooms and routine microscopy tasks. For technical guidance or to arrange supply of the Euromex Phasenkontrast-Set iScope IS.9127, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt expert support and delivery options Technical data Article number: IS.9127 SKU: IS.9127 Brand: Euromex Model series: iScope Product type: Phasenkontrast-Set Facts Zernike phase contrast Rotating disc with PLPH 10/20/40/100 Brightfield and darkfield positions Special features Source: Education PDF p.25; Life Science PDF p.16,42 Application: contrast enhancement for transparent specimens FAQ What types of samples benefit from phase contrast? Phase contrast is ideal for unstained, transparent specimens such as live cells, tissue slices and thin biological samples; the Phasenkontrast-Set iScope IS.9127 enhances visibility without chemical staining. Which objective ports are supported by the rotating disc? The rotating disc is configured for PLPH phase positions aligned to 10/20/40/100 objective ports, enabling compatibility with common phase objectives. Can the set be used for both brightfield and darkfield imaging? Yes, the kit provides selectable positions for brightfield and darkfield in addition to phase contrast for flexible imaging modes. How does Zernike phase contrast work in practice? Zernike phase contrast converts phase shifts caused by variations in refractive index into intensity differences, making otherwise transparent structures visible under a transmission microscope. Is this set suitable for teaching environments? The design and documented references make the Phasenkontrast-Set iScope IS.9127 well suited to education and demonstration, where quick mode switching and reproducibility are essential. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Phasenkontrast-Set Achios-X Observer AX.9126 - Euromex
Optimise transmitted-light contrast with a compact Zernike condenser and matched objectives for improved live-cell imaging and clear phase detail; reliable integration into existing Achios‑X Observer stands ensures consistent results. Order the Phase contrast set Achios‑X Observer AX.9126 directly via Metav Werkzeuge or ask our consultants if needed. Phase contrast set Achios‑X Observer AX.9126 — Zernike condenser with PLPHi objectives by Euromex The Phase contrast set Achios‑X Observer AX.9126 is a complete Zernike phase contrast kit for transmitted‑light microscopes, designed to deliver enhanced contrast for transparent specimens and live‑cell observation. Zernike phase contrast components Includes oil-immersion objectives Green filter for enhanced contrast Compatible with Achios‑X Observer series Improved contrast without staining for clearer live imaging The Zernike system in this kit uses a Zernike phase condenser to convert phase shifts in transparent specimens into amplitude differences, enabling visible contrast without staining. That approach preserves sample integrity and accelerates workflows in biological and medical labs. The configuration is particularly suited to observing live cells and thin tissues where staining is impractical, providing consistently enhanced phase contrast while maintaining optical fidelity and specimen viability. High-resolution objectives and filtration for sharper detail Bundled PLPHi 10x/20x/40x/100x oil immersion objectives increase resolving power and permit high‑magnification phase contrast examinations. The oil immersion objective improves numerical aperture and resolution by matching refractive indices between the specimen and lens, which is essential for observing fine intracellular structures. The included green filter enhances image contrast by narrowing the illumination bandwidth, while the telescope accessory supports precise illumination alignment, resulting in more reproducible, high‑quality images for documentation and analysis. Practical integration and suitable applications for workshop and teaching environments Engineered for compatibility with Achios‑X Observer stands, this phase contrast kit installs without major modification and supports routine microscopy tasks in research, teaching and clinical settings. The set is an effective way to upgrade transmitted‑light capabilities without replacing the microscope body, offering a cost‑efficient path to phase contrast microscopy. If clarification on compatibility or additional technical specifications is required, technical enquiry options are available to confirm suitability for specific workflows. Discuss specifications and arrange supply through Metav Werkzeuge: contact the Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930 to receive tailored advice and ordering assistance for the Achios‑X Observer AX.9126 Technical Data Brand: Euromex Model series: Achios‑X Observer Manufacturer article number: AX.9126 SKU: AX.9126 Product type: Phase contrast set UID: AX.9126 Data Objectives: 10x, 20x, 40x, 100x (oil immersion) Condenser type: Zernike phase condenser Special features PLPHi objectives included Telescope accessory included Green filter for contrast enhancement Zernike phase contrast configuration Designed for transmitted‑light microscopes FAQ What components are included in the phase contrast set? The set contains a Zernike phase condenser, PLPHi 10x/20x/40x/100x oil immersion objectives, a telescope and a green filter as specified for the Achios‑X Observer AX.9126. Can the kit be retrofitted to existing Achios‑X Observer stands? Yes, the phase contrast kit is designed for integration with the Achios‑X Observer series and typically installs without major modification. Is the 100x objective an oil immersion type? The 100x objective in this set is an oil immersion PLPHi objective, intended to increase numerical aperture and resolution for high‑magnification work. Does the green filter affect image brightness? The green filter narrows the illumination spectrum to enhance contrast; exposure may need minor adjustment but image clarity and phase contrast are improved. Is staining required when using this phase contrast kit? No. The Zernike principle converts phase shifts to amplitude differences, allowing clear visualisation of transparent specimens without staining. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Polarisation Kit AX.9660 Simple Polarisation, - Euromex
Benefit from a compact, easy-to‑fit polarisation solution that enhances contrast in routine transmitted‑light work and requires minimal adjustment; select the AX.9660 for straightforward polarisation capability and reliable optical compatibility. Order the AX.9660 Simple Polarisation Kit directly via Metav Werkzeuge or ask our consultants if needed. AX.9660 Simple Polarisation Kit by Euromex — compact polarisation for transmitted‑light microscopes The AX.9660 Simple Polarisation Kit offers a straightforward polarisation solution to add basic contrast enhancement to transmitted‑light microscopy, ideal for labs and educational settings requiring low-complexity optical upgrades. Simple polarisation kit for basic contrast Optimised for transmitted-light microscopes Quick installation and low-complexity setup Improve image clarity with simple polarisation The kit enables clear enhancement of birefringent or stress‑induced features by introducing polarisation to an existing optical path. By placing a polariser and analyser into the transmitted‑light beam, the setup increases contrast for materials that show anisotropic optical properties; this makes it easier to distinguish structures that are otherwise difficult to resolve with ordinary brightfield illumination. The configuration is designed for straightforward use, so routine inspections and teaching demonstrations gain measurable visual benefits without complex optical realignment. Rapid integration into existing transmitted‑light systems Designed as a compact polarisation accessory, the assembly fits into standard transmitted‑light microscopes with minimal modification. The concept focuses on practicality: basic mechanical mounting and alignment reduce downtime and allow workflow continuity in busy workshops and teaching rooms. Because the approach adds polarisation externally rather than requiring a dedicated polarising microscope, laboratories can extend functionality cost‑effectively while maintaining existing instrumentation. Where this kit makes the most difference The Simple Polarisation Kit is suited to routine material checks, educational exercises and quality control tasks where enhanced optical contrast yields faster evaluations. In small laboratories and vocational training environments, this accessory supports clearer differentiation of layered structures, thin films and crystalline regions. The compact format emphasises usability and repeatability, allowing technicians and instructors to focus on observation and analysis rather than instrument complexity. Contact Metav Werkzeuge today for advice on integrating the Euromex AX.9660 Simple Polarisation Kit into current microscopy setups; Metav Werkzeuge in Emmerich provides product guidance and supply coordination at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: AX.9660 SKU: AX.9660 Manufacturer: Euromex Product type: Polarisation set Label: Einfaches Polarisationskit AX.9660 Facts No numerical specifications provided Special features Simple polarisation kit Intended for transmitted‑light polarisation contrast Category: Microscopy accessories · Contrast methods · Polarisation FAQ What is the purpose of this polarisation kit? The AX.9660 Simple Polarisation Kit is intended to add polarisation capability to transmitted‑light microscopes, improving contrast for birefringent or stress‑revealing samples. Which microscopes is the kit compatible with? Compatibility targets standard transmitted‑light microscopes; the AX.9660 is a compact polarisation set designed for integration where a polarising function is required without replacing the main instrument. Does the kit require specialised alignment? Alignment is deliberately straightforward to keep setup time low; the basic polariser and analyser arrangement allows practical installation with minimal optical adjustment. Can the kit be used for educational purposes? Yes, the AX.9660 is well suited to teaching and demonstration use, providing visible polarisation effects that help illustrate optical anisotropy and material structures. Is the kit suitable for professional inspection tasks? For routine inspection and contrast enhancement in workshops and small labs, the Simple Polarisation Kit provides useful, repeatable results as a practical polarisation accessory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Polarisation Microscope Set AE.5152 Polarization Attachment - Euromex
Important product data conflict — reliable description not possible The supplied source documents contain contradictory specifications for the Euromex Microscope polarisation set AE.5152 (SKU AE.5152). Because these inconsistencies affect essential technical details and the PDF explicitly warns that some original entries do not represent confirmed product specifications, a trustworthy, production-ready product description cannot be generated from the available data. To avoid potential misunderstandings or incorrect use of the equipment, no further technical claims or performance statements are provided here. For clarification and validated specifications, please contact Metav Werkzeuge GmbH; the team can verify the correct configuration, confirm the authorised manufacturer data and supply the full, validated product sheet. For enquiries and to request the confirmed technical documentation, email info@metav-werkzeuge.com or call +49 2822 7131930. A confirmed, contradiction-free data set will enable a complete and compliant product description to be produced.
Polarisers Mounting Under Head, iScope IS.9626 - Euromex
Incorrect product data: the manufacturer "Euromex" is not listed among the approved manufacturers, so a product description cannot be generated, as it is essential to ensure that all manufacturers meet the necessary criteria and are included in the approved list to maintain accuracy and compliance with established standards, which is a critical step in verifying the legitimacy and quality of the products being described, thereby preventing any potential issues related to misinformation or misrepresentation that could arise from using data associated with unapproved manufacturers, ultimately safeguarding the integrity and reliability of the information provided to users or customers.
Polarization Microscope Kit 100 x 65 mm Stage, Analyzer Slider, Lamphouse Polarizer - Euromex
Take advantage of the combination of precise polarisation control, a compact rotatable stage and easy retrofit mounting to enhance polarised-light inspections and teaching workflows; order the microscope polarisation kit directly via Metav Werkzeuge or consult our specialists for integration advice. Euromex AE.5155-P Microscope Polarisation Kit — analyser slider with rotatable stage The Euromex AE.5155-P is a compact microscope polarisation kit that provides an analyser in a slider and a small rotatable stage designed for polarised-light applications and easy mounting on a plain stage Analyser in slider for quick polarisation control Rotatable stage 100 x 65 mm with two clamps Fits standard plain microscope stage Polariser for lamphouse mounting Enhanced contrast with precise polarisation control The kit places an analyser in a slide-in holder so polarisation adjustments can be made quickly and reproducibly without dismantling the microscope. By combining the analyser with a lamphouse-mounted polariser, the set enables clear visualisation of birefringent materials; this yields sharper contrast for structure recognition and material identification. The design reduces downtime during sample preparation and supports consistent imaging across routine inspections. Reliable sample orientation and secure handling A small rotatable stage (100 x 65 mm) with two integrated clamps permits controlled rotation of specimens under crossed polars, helping to reveal extinction angles and interference colours. The stage is intended to be mounted on a plain stage, so it retrofits existing stands with minimal modification. The clamps ensure stable sample positioning during rotation, which is especially useful when analysing thin sections, fibres or crystalline inclusions where orientation affects the observed optical effects. Practical for education, quality control and laboratory routines Compact and straightforward to use, the kit suits teaching labs, inspection benches and production-control workstations that require reliable polarised-light capability without dedicated polarising microscopes. The solution delivers tangible workflow benefits: faster set-up, reproducible contrast enhancement and straightforward integration into existing microscopes. For users new to polarisation, the basic functions—polariser, analyser and rotatable stage—are explained simply and translate directly into improved identification of anisotropic materials. For ordering, technical compatibility checks or further advice on integrating the AE.5155-P polarisation kit into existing systems, contact Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: AE.5155-P SKU: AE.5155-P Brand: Euromex Product type: Microscope polarisation kit Facts Rotatable stage dimensions: 100 x 65 mm Special features Analyser in slider Small rotatable stage with two clamps Designed to be mounted on plain stage Polarisation filter for lamphouse mounting Source: Education PDF, p. 13 FAQ What components are included in the kit and how do they improve polarised-light observation? The AE.5155-P kit includes an analyser in a slider, a small rotatable stage (100 x 65 mm) with two clamps and a polarisation filter for lamphouse mounting; these elements allow rapid polarisation control and reliable sample rotation for enhanced contrast and material characterisation. Can the rotatable stage be fitted to most standard microscopes? Yes, the rotatable stage is designed for mounting on a plain stage and is compatible with many common microscope stands; Metav Werkzeuge can advise on mechanical compatibility for specific models. Is the polarisation kit suitable for teaching environments? The kit is well suited to educational use: compact, robust and intuitive, it helps demonstrate birefringence and extinction phenomena without requiring a dedicated polarising microscope. How does the analyser-in-slider benefit routine inspection workflows? The slider-mounted analyser simplifies repeatable insertion and removal, speeding up transitions between brightfield and polarised-light inspections and reducing alignment variability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Polarization Microscope Kit 75x50mm Rotatable Stage With Analyzer, 360° Polarizer - Euromex
Take advantage of the combination of controlled polarisation, an analyser slider and a compact rotatable stage to improve sample contrast and handling in transmitted-light workflows; order the kit directly via Metav Werkzeuge or consult the team for integration advice. Microscope Polarisation Kit AE.5158 – Euromex, 360° rotating polariser & rotatable stage The Microscope Polarisation Kit AE.5158 is a compact polarisation accessory set for transmitted-light microscopes, designed to enhance contrast and support material inspection in education and routine laboratory applications. Analyser in slider for straightforward installation Rotatable 360° polariser for lamphouse mounting Small 75 x 50 mm rotatable stage with clamps Greater contrast and clearer material identification for transmitted-light work The kit introduces controlled polarisation into standard transmitted-light setups, which produces clearer birefringence and stress contrast in anisotropic specimens. The included analyser slider is mounted in a holder that accepts standard optical bays, so polarisation control is achieved without major instrument modification. This results in improved visual separation of phases and defects, a benefit that reduces interpretation time and supports reliable documentation in routine inspections. Easier sample handling with a rotatable mini stage and secure clamps A compact rotatable stage (75 x 50 mm) with two clamps enables precise sample orientation and stable positioning for repeatable observations. The stage is sized for small specimens and fits directly on an existing X–Y stage, allowing fine lateral adjustment; rotation enables aligning structural features to the polariser axis without remounting the sample. The arrangement supports efficient workflows in teaching environments and small laboratories where throughput and repeatability matter. Simple integration: 360° polariser for lamphouse and modular mounting A 360° polariser supplied for lamphouse attachment offers continuous rotation for extinction and retardation studies, while the analyser is supplied as an analyser slider for insertion into a condenser or intermediate slot. The kit is therefore compatible with a range of transmitted-light microscopes where lamphouse or condenser accessories are standard. Installation is straightforward and preserves existing optical alignments, which minimises downtime and keeps instrument calibration stable. Robust design for teaching, inspection and everyday lab use Built to support frequent use, the kit contributes to consistent image quality and precision in polarised-light observations. The configuration enhances repeatability, which is particularly valuable for comparative studies, student demonstrations or routine quality checks. For users uncertain whether the kit meets specific technical requirements, technical data and application advice are available from Metav Werkzeuge to assist with selection and setup. Contact Metav Werkzeuge to discuss fitting the Euromex AE.5158 polarisation kit to existing microscopes or to request supplementary technical data by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: AE.5158 Manufacturer: Euromex SKU: AE.5158 Product type: Microscope Polarisation Kit Short description: Microscope Polarisation Kit AE.5158 Core Data Stage size: 75 x 50 mm Stage rotation: 360° rotatable Clamps: 2 clamps for sample fixation Polariser rotation: 360° (lamphouse-mounted) Features Analyser in slider Small rotatable stage for X–Y stage mounting Two specimen clamps 360° polarisation filter for lamphouse Intended for transmitted-light microscopes FAQ What does the kit include and how is the analyser supplied? The kit contains an analyser supplied as a slider and a small rotatable stage (75 x 50 mm) with two clamps; the analyser slider is compatible with standard condenser or intermediate slots. Can the polariser be rotated continuously and where is it mounted? Yes, the polariser rotates through 360° and is designed for mounting on the lamphouse to allow continuous adjustment of polarisation direction. Is the stage suitable for small specimen work and precise alignment? The rotatable mini stage is sized at 75 x 50 mm and includes two clamps, enabling precise alignment and stable fixation for small specimens on an X–Y stage. Is the kit compatible with any transmitted-light microscope? The kit is designed for microscopes with lamphouse and standard slider or condenser slots; specific compatibility depends on the instrument model—Metav Werkzeuge can advise on fit and requirements. How does polarisation improve laboratory observations? Polarisation enhances contrast for birefringent or stressed materials, making internal structures and phase differences easier to identify and document during routine inspections or teaching demonstrations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com