wie liest man mit einem messschieber richtig ab?

Take advantage of the carbon‑fibre construction, 100 mm reach and compatibility with calipers that have a jaw thickness of 8 mm for consistent external groove measurements; order this insert directly via Metav Werkzeuge or consult our specialists for application advice. Insert for External Groove Measurement, 100 mm — carbon‑fibre accessory for digital universal calipers (Metav IndustryLine) The Insert for External Groove Measurement, 100 mm is a purpose‑built attachment for carbon‑fibre digital universal calipers that extends measurement capability to external grooves with consistent handling and fit. Carbon‑fibre construction for stable readings 100 mm reach for extended groove access Fits calipers with 8 mm jaw thickness Lightweight 0.2 kg for easy handling Reliable groove measurement with extended reach Designed for precise work on external grooves, the 100 mm insert provides an extended reach that simplifies measurement of grooves and recesses that standard jaws struggle to access. The accessory is intended for use in workshop and production environments where repeatable external groove measurement is required. Compatibility with digital universal calipers ensures the adapter can be integrated into established measuring workflows without altering the instrument’s basic operation. Stable performance thanks to carbon‑fibre design Made from carbon‑fibre, the insert combines low mass with structural stiffness, supporting steady contact during measurement and minimising thermal influence on short inspection runs. The lightweight nature (0.2 kg) reduces additional inertia on the caliper, helping operators maintain consistent handling over multiple measurements. These material benefits translate into practical advantages at the bench: easier manoeuvring into grooves and reduced risk of deflection compared with heavier attachments. Quick integration with digital universal calipers The insert is engineered to fit jaws with a thickness of 8 mm, delivering a secure seating and reliable transfer of the measuring surfaces to the caliper’s slide. Installation is straightforward and restores the caliper’s functionality for external groove checks without the need for special fixtures. As an accessory for digital universal calipers, it preserves the instrument’s measurement workflow while extending its application range. Practical accessory for everyday workshop use As a workshop accessory from Metav IndustryLine, the insert supports routine inspection and maintenance tasks where grooves must be checked quickly and reliably. Its design focuses on practicality: accessible reach, low weight and direct compatibility with common caliper jaws. For purchasing and logistics, Metav Werkzeuge supplies this accessory alongside a broad range of measuring tools, providing a single‑source option for workshops aiming to keep operations efficient and supplies standardised. For specification advice or to request the Metav IndustryLine 100 mm insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific calipers and applications Technical data Article number: M217.366 GTIN: 4054469183268 Manufacturer: Metav IndustryLine Facts Overall length: 100 mm Width: 16 mm Weight: 0.2 kg Compatible jaw thickness: 8 mm Special features Material: carbon‑fibre Application: external groove measurement Compatible with digital universal calipers Category: workshop calipers accessory eClass: 21170344 FAQ What is this insert used for? The insert is intended for external groove measurement; the Metav IndustryLine insert M217.366 extends the reach of digital universal calipers for groove and recess inspection. Will this accessory fit my caliper? It fits calipers with a jaw thickness of 8 mm; compatibility with a specific digital universal caliper is confirmed when the jaw thickness and mounting geometry match the M217.366 design. What material is the insert made from? The insert is manufactured from carbon‑fibre, chosen for its low mass and structural stiffness to support stable measurements. How long is the insert and how heavy is it? The insert measures 100 mm in overall length and has a mass of 0.2 kg, providing extended reach without significant additional weight. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust monoblock design, hardened stainless steel construction and precise fine adjustment to keep large-format measurements reliable and repeatable on the production floor; order directly via Metav Werkzeuge or ask the consultants for technical advice. M201.309 Workshop Caliper with Tip — 1,000 mm range, 0.02 mm resolution, stainless The M201.309 Workshop Caliper with Tip is a heavy-duty analogue caliper built for workshop measurement tasks, providing robust external, internal and step measuring capability for large components. 1,000 mm measuring range Hardened stainless steel construction Fine adjustment screw for precise setting Monoblock frame for high rigidity Stable long‑range measuring for larger components Classified in the Large measurement class (500–1,000 mm), this caliper is tailored to workshop and fixture environments where reach and repeatability matter. The monoblock frame reduces flex along the slide, maintaining alignment over the full measuring length and supporting reproducible results on larger workpieces. The extended jaw geometry with a 150 mm tip length enables secure contact on deep features and shoulders, which simplifies handling of housings, large shafts and assembly fixtures without compromising stiffness. Accurate analogue readings with workshop durability The analogue vernier delivers a mechanical resolution of 0.02 mm, keeping the instrument within the range of the highest mechanical precision for calipers. Combined with a matt‑chromed scale on hardened stainless steel, the scale contrast remains clear under workshop lighting and resistive to corrosion. A dedicated fine adjustment screw permits measured, micro‑movement of the slide for exact closing and alignment before the reading is taken, which is particularly useful when measuring step heights or small depth differences where controlled contact force improves consistency. Practical features that support production workflows Designed for use in everyday machine‑shop conditions, the caliper covers external, internal and step measurements in one instrument and is supplied in a transport case for safe handling and storage during site movement. The mechanical vernier format suits environments where robust, battery‑free operation is preferred and service intervals are minimal. Delivered to factory standard (Werksnorm), the instrument is well suited to workshop quality checks and setup tasks; its straightforward mechanics reduce the need for frequent recalibration cycles compared with sensitive electronic instruments. Choose the Metav IndustryLine M201.309 for durable, long‑range workshop measurement and contact Metav Werkzeuge for expert advice and secure supply directly from Emmerich. Technical Data Article number: M201.309 GTIN: 4054469101293 Brand: Metav IndustryLine Facts Measuring range: 0–1000 mm Resolution: 0.02 mm Jaw length: 150 mm Vernier scales: 1/1000" top and 1/50 mm bottom Special features Material: hardened stainless steel with matt‑chromed scale Design: monoblock frame Operation: analogue vernier, fine adjustment screw Measurement types: external, internal, step Delivery: transport case for safe movement Calibration: factory standard (Werksnorm) FAQ How precise is the caliper for workshop tasks? The M201.309 workshop caliper provides a mechanical resolution of 0.02 mm, placing it among the highest‑precision analogue calipers suitable for demanding workshop measurements. Which measurement types can be performed with this caliper? External, internal and step measurements are supported by the caliper; the 150 mm jaw/tip length helps reach deeper features while keeping contact stable. Is the instrument protected for transport between job sites? Yes, the caliper is supplied in a transport case to protect the hardened stainless steel body and scale during movement and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Extend caliper reach with a 100 mm external measuring point that fits a jaw thickness of 8 mm and weighs just 0.2 kg; the result is improved access to small external features and steadier handling during repetitive checks. Order the attachment directly via Metav Werkzeuge or consult our specialists for application advice. M217.365 External measurement point attachment, 100 mm — Metav IndustryLine The M217.365 is a 100 mm external-measurement tip attachment for digital universal calipers, designed to access small outer diameters and features where a pointed contact is required. 100 mm measuring tip for external measurements Compatible with 8 mm caliper jaws Lightweight design, approx. 0.2 kg Reach small features with assured repeatability The precision tip expands the practical use of a workshop caliper without compromising handling: the 100 mm length gives extended reach for recessed or awkwardly positioned external surfaces, while the pointed end allows contact with narrow profiles and small radii. Fitting as an accessory to a digital universal caliper, the attachment makes previously difficult measurements straightforward, reducing repositioning and the associated variability. The focused design supports efficient measuring routines in assembly and inspection tasks where speed and repeatability matter. Easy integration and balanced handling for everyday use Designed to seat on caliper jaws with a 8 mm thickness, the attachment mounts quickly and remains stable throughout manual measurements. At just 0.2 kg, the accessory minimises added mass and prevents excessive cantilevering that could otherwise affect measurement stability. The simple mechanical interface keeps the digital display behaviour unchanged, so measurement readouts remain the authoritative source. This combination of compatibility and light construction aids productivity in busy workshops and on the shop floor. Workshop-ready accessory that complements digital calipers As a purpose-made external measurement tool for workshop calipers, the attachment is tailored to practical trade use: it is compact to store, quick to fit, and focused on a single function—precise external contact with a pointed tip. For operations that rely on rapid checks or need an occasional extended reach without purchasing a longer main caliper, this accessory provides a cost-effective option. The Metav IndustryLine origin signals supply chain reliability and a European quality filter that supports consistent availability and dependable service. Contact Metav Werkzeuge today to specify the right attachment for the calipers in use or to discuss fitting options for your measuring setup Technical Data SKU: M217.365 GTIN: 4054469183251 Manufacturer: Metav IndustryLine Facts Total length: 100 mm Weight: 0.2 kg Suitable jaw thickness: 8 mm Special features Application: external measurement with pointed tip Compatible with digital universal calipers made of carbon fibre Category: workshop caliper accessory FAQ Is the attachment compatible with standard digital calipers? The attachment is designed for use with digital universal calipers and fits jaws with a thickness of 8 mm; compatibility with a specific caliper model should be checked against the jaw profile and fixing method. Which measurement tasks is the tip intended for? The pointed tip is intended for external measurements on narrow edges, small diameters and recessed outer features where a standard jaw face would not reach; the 100 mm length provides added access without replacing the main caliper. How is the attachment mounted and secured? Mounting is mechanical to caliper jaws of 8 mm thickness; the design keeps the digital readout functionally unchanged while providing a stable contact point for external checks. Does this accessory affect the caliper's accuracy? The accessory provides a precise contact point, but overall measurement accuracy depends on the base caliper and the measuring procedure. The attachment is an aid to access and repeatability rather than a standalone calibrated instrument. What are the identifying codes for ordering? Order reference: SKU M217.365; GTIN 4054469183251. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of long-range measurement capability, a rigid monoblock construction and fine vernier control for dependable workshop dimensioning; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Workshop Caliper M201.351 — 1,250 mm monoblock caliper, hardened stainless steel The Workshop Caliper M201.351 is a long-range, monoblock analogue caliper engineered for large workshop and fixture measurements, combining robust construction with precise vernier reading for reliable, repeatable checks. *Monoblock design for high rigidity *1,250 mm measuring range for long parts *Stainless hardened construction with matt chrome scale *Fine adjustment and 0.05 mm vernier resolution Built for long-span workshop measurements with minimal flex The instrument is designed as a monoblock caliper with a cross-section of 31 x 10 mm, which increases profile stiffness across its full length and reduces deflection when measuring long or heavy components. Classified in the Long range (1,000–2,000 mm), the 1,250 mm measuring span suits large assemblies, fixtures and profiles where single‑pass checks improve throughput. The substantial jaw geometry and monoblock beam support reproducible positioning, making this tool a practical choice for heavy‑duty workshop measurement tasks. Analogue precision that meets workshop standards This analogue instrument employs vernier scales (1/128" on the top scale and 1/20 mm on the bottom scale) to provide a readable resolution of 0.05 mm, matching industrial expectations for mechanical calipers. With a jaw length of 200 mm, the measuring faces and vernier comply with DIN 862, ensuring measurement behaviour conforms to recognised workshop standards. The integrated fine adjustment mechanism enables controlled closing of the jaws for repeatable readings, while the matt‑chromed scale reduces glare and facilitates accurate visual interpretation. Durable materials, ergonomic handling and safe transport Constructed from stainless steel that has been hardened, the caliper is finished with a matt chrome graduation for long term legibility and resistance to workshop wear. The 200 mm jaw length balances reach and handling: long enough for many workpieces yet short enough to remain manageable for single‑person use. Delivery in a transport case provides protection during storage and transit, and the robust beam profile supports frequent daily use in metalworking environments. Routine care—light lubrication of the slide and clean storage in the supplied case—preserves measurement integrity. Contact Metav Werkzeuge to discuss integrating the M201.351 monoblock long-range caliper into your inspection routine or to request delivery and technical details from our Emmerich warehouse Technical Data Article number: M201.351 GTIN: 4054469182315 Brand: Metav IndustryLine Facts Measuring range: 0–1,250 mm Jaw length: 200 mm Cross-section: 31 x 10 mm Resolution: 0.05 mm Vernier scales: 1/128" (top), 1/20 mm (bottom) Applicable standard: DIN 862 (jaw length 200 mm) Special features Monoblock beam for increased rigidity Fine adjustment for controlled measurement Material: hardened stainless steel, matt‑chrome scale Supplied in a transport case for safe handling Analogue (vernier) configuration FAQ How accurate is the Workshop Caliper M201.351 for routine inspection tasks? The Workshop Caliper M201.351 provides a vernier resolution of 0.05 mm and, with its DIN 862 conformity at the 200 mm jaw length, is suited to standard workshop accuracy requirements and repetitive dimensional checks. Which measurement tasks can be performed with this caliper? This analogue caliper performs external, internal and step measurements using the jaw faces and stepped surfaces; the fine adjustment aids precise closure for repeatable external readings. Is the M201.351 suitable for heavy workshop environments? Yes. The monoblock construction and hardened stainless steel beam are designed to withstand daily use in metalworking shops and fixture assembly areas while maintaining dimensional stability over long spans. Does the caliper come with a calibration certificate? The product data do not indicate an ISO 17025 calibration; please contact Metav Werkzeuge if a traceable calibration certificate is required for the Workshop Caliper M201.351. What protective measures are included for transport and storage? The caliper is supplied in a transport case to protect the beam and jaws during handling and storage; regular cleaning and light lubrication are recommended to maintain the scale and sliding surfaces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from dependable 0.05 mm resolution, robust stainless steel construction and an interchangeable measuring rod that adapts to varied depth tasks; order the depth gauge directly via Metav Werkzeuge or consult our specialists for further technical advice. Depth Gauge with Interchangeable Pin Tip M204.063 — 0–150 mm, 0.05 mm Vernier (Metav IndustryLine) The Depth Gauge with Interchangeable Pin Tip M204.063 is an analogue depth gauge designed for standard workshop and machine‑shop depth measurements up to 150 mm, offering a compact, durable solution for precise recess and bore depth checks. 0.05 mm vernier resolution Stainless steel, matt‑chrome scale Interchangeable measuring rod and pin tip Supplied in a transport case Precise depth control for everyday production This analogue instrument delivers a clear metrological advantage through its 0.05 mm vernier, derived from the 1/20 mm nonius. The fine gradation allows repeatable depth readings that meet common workshop tolerances while remaining simple to interpret without electronics. The design combines a rigid depth beam with a slim measuring pin, enabling access to narrow recesses and stepped features. Compliance with DIN 862 guarantees that the gauge matches established mechanical‑engineering standards and fits seamlessly into established inspection routines. Robust handling and corrosion resistance Constructed from stainless steel with a matt‑chrome scale and vernier, the instrument resists workshop contaminants and reduces surface glare for easier reading under workshop lighting. The interchangeable measuring rod and pin tip provide practical adaptability: the rod can be repositioned for different depths or replaced if damaged, avoiding the need for a full tool swap. At around 0.2 kg, the gauge is light enough for single‑hand use yet stiff enough to ensure stable measurements within its standard range. Designed for the workshop: classification and use case With a measuring span to 150 mm, the device falls into the Standard size class (100–300 mm), which is the universal choice for machine shops and metalworking departments thanks to its balanced reach and stiffness. As an analogue vernier instrument, it is particularly useful where electromagnetic interference or battery dependence is a concern, or where a tactile, mechanical feel is preferred for routine quality checks. The measuring kit is supplied ready for use in a transport case, facilitating safe storage and controlled transport between workstations. Specify the Metav IndustryLine depth gauge M204.063 for reliable 0.05 mm depth measurement — contact Metav Werkzeuge in Emmerich for procurement and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M204.063 GTIN: 4054469164076 Standard: DIN 862 Type: analogue depth gauge Facts Measuring range: 0–150 mm Resolution (vernier): 0.05 mm Weight: 0.2 kg Tariff code: 90173000 Bridge / beam: 100 mm Special features Stainless steel with scale and vernier, matt‑chrome finish Nonius 1/20 mm (0.05 mm) on lower edge Interchangeable pin tip and measuring rod Standard size class: 100–300 mm Supplied in a transport case FAQ How accurate is the instrument for workshop checks? The depth gauge M204.063 offers a vernier resolution of 0.05 mm, suitable for standard industrial checks and production control within common workshop tolerances. Can the measuring pin be changed for different tasks? Yes, the instrument features an interchangeable measuring rod and pin tip, so the probe can be repositioned or replaced to suit specific depth requirements. Is this gauge suitable for harsh workshop environments? The matt‑chrome finish on stainless steel provides enhanced corrosion resistance and reduces glare, making the gauge robust enough for typical machine‑shop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine robust ingress protection, a 0.01 mm display resolution and a hardened stainless steel construction for dependable, repeatable measurements on the shop floor; the result is consistent component inspection and fewer reworks. Order the digital caliper directly via Metav Werkzeuge or consult our specialists for application advice and supply options. Digital Caliper 150 mm M216.161.D – IP67 protection, 0.01 mm resolution (Metav IndustryLine) The Digital Caliper 150 mm M216.161.D is a compact, workshop-grade measuring instrument designed for general machining and quality control tasks where resilience and clear readout are essential. IP67 protection against dust and water Hardened stainless steel construction 0.01 mm resolution, ±0.02 mm accuracy Four measuring functions: inner, outer, depth, step Built for wet and dusty workshop conditions The instrument’s IP67 rating ensures reliable operation even where coolant mist, swarf or dust are present; this reduces measurement interruptions and extends service life compared with non-sealed instruments. The frame is made from hardened stainless steel, which provides both corrosion resistance and structural stiffness to keep readings consistent under daily use. Delivered in a transport case, the caliper arrives protected for transit and on-site handling, supporting safe storage between jobs. Accuracy that supports production decisions With a display resolution of 0.01 mm and an accuracy of ±0.02 mm, this caliper meets the expectations of standard precision control in machining and metalworking. The specification follows DIN 862, giving a familiar benchmark for quality assurance. Practically, the resolution and tolerance mean the device is suitable for routine inspection of turned parts, milled components and assembly checks where rapid, verifiable measurements are required rather than sub‑micron laboratory work. Versatile measuring capability and ergonomic handling Equipped for four measuring functions — outer, inner, depth and step — the caliper replaces several single‑purpose gauges and streamlines workflow. The digital display includes tactile buttons (INC, MODE, HOLD and ON/OFF) for straightforward operation, and an automatic shut-off feature preserves the CR2032 battery during intermittent use. The instrument’s jaw length and profile suit common workshop tasks while remaining easy to manipulate for one‑handed measurements. Practical benefits for procurement and daily use Classified in the Standard size group (measurement range to 150 mm), the tool offers the best compromise between reach and rigidity for general workshop needs; typical applications include machine shops, maintenance departments and metal fabrication. The sealed electronics are advantageous where intermittent wetting occurs, and the hardened material minimises wear on contact surfaces for longer service intervals. The result is lower total cost of ownership through fewer replacements and less downtime. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine caliper into your inspection workflow or to arrange delivery from Emmerich: +49 2822 7131930, info@metav-werkzeuge.com Technical Data Article number: M216.161.D GTIN: 4054469182919 Brand: Metav IndustryLine Standard: DIN 862 Facts Measurement range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.02 mm Weight: 0.4 kg Protection class: IP67 Battery: 3 V CR2032 Special features Material: hardened stainless steel Four measuring functions: outer, inner, depth, step Digital display with INC, MODE, HOLD and ON/OFF buttons Automatic shut-off Delivered in a transport case (plastic or wooden depending on logistics) FAQ What is the usable measurement range of the caliper? The Digital Caliper 150 mm M216.161.D provides a measurement range of 0–150 mm, placing it in the Standard category for workshop use. How precise is the instrument for routine checks? Resolution is 0.01 mm with an accuracy of ±0.02 mm, which is suitable for standard machining tolerances and quality control tasks. Can the caliper be used in damp or dirty environments? Yes, the device has an IP67 rating, meaning the electronics are sealed against dust and temporary immersion, making it robust for harsh workshop conditions. Which measuring tasks does this caliper perform? The caliper supports outer, inner, depth and step measurements, offering four measuring functions that cover most general inspection requirements. Is a calibration certificate supplied with the caliper? A calibration certificate is provided only if explicitly specified; standard factory settings apply unless a particular calibration option is requested at purchase. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact mounting profile that combines 150 mm length, a 16×2.5 cross‑section and exceptionally low weight for stable, repeatable angle measurement; order directly via Metav Werkzeuge or ask our consultants for integration advice. 150 mm rail for TOP universal angle measuring instrument — 16×2.5 cross‑section, Metav IndustryLine The 150 mm rail for TOP universal angle measuring instrument is a compact mounting profile designed to deliver a rigid reference for precision angle measurements in workshop and laboratory metrology. Compact 150 mm precision profile Robust 16×2.5 cross‑section Lightweight 0.1 kg mounting rail Metav IndustryLine manufacturing quality Stable reference for repeatable angle measurement The short, stiff profile creates a dependable datum for measuring angles with high repeatability. With a 150 mm nominal length and a 16×2.5 cross‑section, the profile limits bending and torsion that otherwise introduce measurement scatter; this is particularly beneficial where consistent alignment is required across multiple setups. The geometry serves as a fixed mounting surface for the TOP universal angle device, turning a measuring head into a reproducible inspection station and helping to keep process tolerances tight. Easy retrofit and predictable handling in the workshop The rail’s compact dimensions and low weight (around 0.1 kg) simplify installation and handling on measurement benches, fixtures or portable test rigs. The cross‑section specification denotes the profile width and wall thickness, which together determine stiffness and mounting clearance; these parameters make the component straightforward to fit where space is limited. Delivered without additional packaging, the part is intended for direct assembly into existing systems or for integration into jigs where immediate use is required. Industrial reliability and traceable identification Produced under the Metav IndustryLine label, the rail reflects consistent production standards for workshop metrology parts. Clear identification with GTIN and SKU supports inventory control and traceability in procurement processes, while the compact construction reduces storage footprint and simplifies logistic handling. Where a rigid, short reference is needed for repetitive angle checks, this mounting profile offers a pragmatic combination of stiffness and portability that supports efficient inspection routines. For matching parts, technical advice or to procure the Metav IndustryLine 150 mm rail, contact Metav Werkzeuge in Emmerich — our specialists will recommend the correct mounting solution and supply options. Technical data SKU: M214.098.1 GTIN: 4061905053641 Description: 150 mm rail for TOP universal angle measuring instrument (without packaging) Brand: Metav IndustryLine Facts Length: 150 mm Cross‑section: 16×2.5 mm Weight: 0.1 kg Special features No packaging (delivered unpacked) Compatible with TOP universal angle measuring instruments Compact, stiff profile for repeatable setups FAQ What is the intended use of this rail? The rail serves as a compact mounting and reference profile for angle measurement systems; it is designed to accept the TOP universal angle measuring instrument and to provide a stable datum for repeatable measurements. Is the rail supplied ready for installation? Yes, the Metav IndustryLine 150 mm rail is delivered without packaging and is intended for immediate integration into fixtures or measurement benches. What do the dimensions 16×2.5 indicate? The specification denotes the profile’s width and wall thickness (in millimetres); it is a key factor in the rail’s stiffness and suitability for supporting an angle measuring head. Can this rail be used in a portable inspection setup? Its compact length and 0.1 kg weight make the profile suitable for portable or bench‑mounted inspection rigs where a rigid, short reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, rigid 300 mm mounting solution with a 16×2.5 mm profile and minimal mass for fast alignment and repeatable angle referencing; order the rail directly via Metav Werkzeuge or consult our technical advisors if further specification is required 300 mm rail for TOP universal angle measuring device — 16×2.5 mm profile The 300 mm rail for TOP universal angle measuring device is a compact mounting rail designed to provide a stable reference for angle measurement and fixturing in metrology and workshop environments 300 mm precision mounting rail 16 × 2.5 mm cross-section profile Lightweight: 0.1 kg for easy handling Compatible with TOP universal angle devices Stable reference for repeatable angle measurements The rail serves as a rigid reference that reduces alignment variation during repetitive angle checks. With a nominal length of 300 mm and a slim 16×2.5 mm profile, the component balances reach and stiffness to deliver consistent mechanical positioning in tight setups. This stability is advantageous where reproducible readings are required across batches or when establishing a fixed datum in inspection jigs. The combination of profile geometry and low mass supports fast handling without sacrificing the repeatability expected in production metrology. Compact profile for integration into fixtures and test benches The narrow profile of the rail allows it to be integrated into existing test benches, height gauges or dedicated angle fixtures without demanding extra space. Its 16×2.5 mm cross-section is especially useful when installation space is limited but a secure mounting surface is still necessary. The design simplifies retrofitting tasks and reduces the need for custom adapters, making the component a pragmatic choice for laboratories and small-series production where flexibility is essential. Low weight for quick set-up and handling Weighing only 0.1 kg, the rail is easy to manoeuvre during assembly and inspection routines. The low mass reduces operator fatigue when repeated repositioning is required and shortens the time needed to reconfigure setups between jobs. In practical terms, the lightweight nature of the component contributes directly to improved throughput in workshop workflows, as handling times and clamping adjustments are reduced. Designed for straightforward compatibility with angle units The rail is specified for use with TOP universal angle measuring devices, ensuring mechanical compatibility with that product family. This compatibility means fewer alignment complications at the interface and a predictable fit when replacing or upgrading existing measurement components. For applications that demand a reliable mechanical coupling to the measuring head, the rail provides a clear, purpose-built mounting surface. Supplied without packaging for economical logistics Delivered without packaging, the component reduces bulk and waste when integrated into larger shipments or production kits. This format is particularly suited to OEM assembly lines and refurbishment environments where the rail is incorporated directly into a toolset or calibration fixture. The delivery format streamlines storage and handling when items are being kitted for on-site installation or factory modification. Practical advantages for inspection and small-batch production As a compact mounting element, the rail supports faster setup, simpler alignment and consistent positioning across inspection cycles. Its combination of 300 mm length, precise profile and negligible weight makes it a practical accessory for workshops, calibration benches and quality control stations that require dependable mechanical references without extensive modification to existing equipment. Contact Metav Werkzeuge for advice on integrating this 300 mm rail into existing measurement rigs or to discuss compatible TOP angle devices — Metav Werkzeuge can provide technical guidance from Emmerich and supply the article directly Technical data Article number: M214.098.3 GTIN: 4061905053627 Brand: Metav IndustryLine Label: 300 mm Schiene für TOP-Univ.-Winkelmessgerät ohne Verpackung Facts Length: 300 mm Cross-section: 16×2.5 mm Weight: 0.1 kg Special features Supplied without packaging Compatible with TOP universal angle measuring devices Compact profile for fixture integration FAQ What is the exact length and profile of the rail? The rail measures 300 mm in length and features a 16×2.5 mm cross-section; reference the article number M214.098.3 for ordering. Is the rail delivered packaged? No, the item is supplied without packaging, which is suitable for kit assembly or direct integration into production shipments. Which measuring units does this rail suit? The rail is designed for mechanical compatibility with TOP universal angle measuring devices and related mounting setups. Can the rail be used as a reference in inspection fixtures? Yes, the rail provides a stable, repeatable mechanical reference that can be incorporated into inspection jigs and calibration benches. How heavy is the component and what does that mean for handling? At 0.1 kg, the rail is lightweight and easy to handle, enabling quick repositioning and faster set-up times across small-batch or repetitive tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com