Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
15.56mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of high measuring reliability, compact form factor and workshop-ready durability for repeatable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for integration advice. Gauge pin, single, 15.56 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin, single, 15.56 mm diameter, 50 mm length is a precision cylindrical pin engineered for end‑dimension verification and fixture reference in workshop and inspection environments. Workshop-grade construction Diameter 15.56 mm, length 50 mm Special steel for wear resistance Tolerance ±0.002 mm for fine checks Stable readings for consistent quality control The gauge pin delivers repeatable measurements thanks to its tight manufacturing tolerance of ±0.002 mm, which reduces ambiguity in pass/fail decisions during inspection. For routine end‑dimension checks and fixture references, the pinned diameter of 15.56 mm provides a defined datum that can be relied upon when setting up go/no‑go verifications or calibrating simple jigs. The short, compact length of 50 mm keeps the instrument easy to handle while preserving stiffness, limiting deflection and maintaining measurement integrity under normal workshop handling. Robust build tailored for workshop use Manufactured from special steel, this workshop version is designed for extended service in production environments where surface contact and repeated use are normal. The material choice supports resistance to wear and preserves the gauge geometry over time, helping to avoid gradual drift in size. The single‑piece design simplifies storage and reduces the number of interfaces that can introduce error. Supplied as an individual instrument, the pin integrates well into inspection sets and is suitable for routine control tasks where a durable, straightforward reference element is required. Practical application and inspection advantages This cylindrical reference element is ideal for end‑measure checks, plug gauges in fixture alignment and quick verification tasks on the shop floor. The compact design supports quick handling during machine setup or batch inspection, accelerating routine processes without sacrificing precision. Traceability and ease of identification are supported by the clear SKU and labelling, which facilitates stock keeping and reordering for maintenance of measurement routines. For bespoke inspection plans or fixture integration, technical advice is available from the supplier to ensure the pin meets the required inspection workflow. For workshop‑grade accuracy and dependable integration, request the Metav IndustryLine gauge pin (M323.F56) through Metav Werkzeuge — contact our Emmerich team at info@metav-werkzeuge.com or +49 2822 7131930 for specification support and procurement guidance. Technical data Article number: M323.F56 GTIN: 4061905067242 Manufacturer: Metav IndustryLine Weight: 0.1 kg Numerical data Diameter: 15.56 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Materials and features Material: special steel Workshop version Delivered in a protective case Single gauge pin FAQ What measurement tolerance does the gauge pin have? The gauge pin is manufactured to a tolerance of ±0.002 mm, providing fine verification capacity for end‑dimension checks. Which material is used for this gauge pin? This Metav IndustryLine gauge pin is made from special steel chosen for wear resistance and stable geometry. Is the product supplied individually or as a set? The item is supplied as a single gauge pin (SKU M323.F56) suitable for use as a stand‑alone reference or combined into inspection kits. Can this pin be used directly in fixture alignment? Yes, the cylindrical geometry and precise diameter of 15.56 mm make it suitable for fixture reference and quick alignment tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.57mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of the combination of ±0.002 mm repeatability, special steel construction and a compact 50 mm working length for reliable end‑measure verification; order the gauge pin directly via Metav Werkzeuge or consult our specialists for batch and tolerance options. Gauge pin, single, Ø 15.57 mm, length 50 mm — Workshop version by Metav IndustryLine The Gauge pin, single, Ø 15.57 mm, length 50 mm is a workshop‑grade test pin designed for precise end‑measure checks and alignment tasks in inspection and fixture work. Workshop‑grade finish Diameter 15.57 mm, length 50 mm Accuracy ±0.002 mm Delivered in a protective case Consistent dimensional control for production checks The compact test pin delivers consistently reproducible results thanks to its ±0.002 mm tolerance, which suits fine inspection work where small deviations matter. Manufactured from special steel, the component maintains form stability under regular handling and provides a reliable reference for go/no‑go and end‑measure verifications. Using a dedicated gauge pin reduces the need for iterative rework and shortens inspection cycles, helping to keep quality checks efficient and predictable. Robust workshop design for everyday use Built as a workshop‑version test pin with a 50 mm shank, the measuring pin balances rigidity and manageability during handling. The special steel construction offers resistance to wear and maintains the reference diameter over repeated insertions. Supplied in a protective case for secure transport, the pin is suited to busy inspection benches and mobile testing kits. The compact dimensions allow easy storage and quick access while preserving accuracy across shifts. Practical integration into inspection and jig setups The pin is intended for end‑mass and alignment purposes in fixtures and gauges, serving as a precise plug for bore or port checks. Its single‑pin form factor makes it straightforward to include in measured assemblies or as a reference element in comparative checks. Traceability is supported by the supplied article data; the SKU and GTIN are available in the technical details for procurement and inventory integration. The pin functions as a simple, low‑overhead tool that complements more complex metrology equipment and reduces setup time in routine inspection tasks. Secure consistent end‑measure control with this workshop‑grade gauge pin — contact Metav Werkzeuge (SKU M323.F57) for procurement or technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.F57 GTIN: 4061905067259 Product label: Gauge pin, single, Ø 15.57 mm, length 50 mm Facts Diameter: 15.57 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.10 kg Special features Material: special steel Workshop version (werkstatt‑ausführung) Delivered in protective case Use case: end‑measure checks / alignment FAQ What diameter and length does this gauge pin have? The gauge pin is specified as Ø 15.57 mm with a working length of 50 mm (SKU M323.F57) and is intended for end‑measure and alignment checks. What level of accuracy can be expected from this test pin? The test pin offers an accuracy of ±0.002 mm, making it suitable for precise inspection tasks and repeatable reference checks. What material is used for the pin and how durable is it? Constructed from special steel, the pin is designed for workshop use and offers good resistance to wear and deformation under normal inspection conditions. Is the pin supplied ready for transport and storage? Yes — the item is delivered in a protective case to keep the pin secure during transport and storage. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.58mm Gauge Pin, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of shop-floor robustness, 15.58 mm nominal diameter and a tight ±0.002 mm tolerance for reliable go/no-go checks; order the gauge pin directly via Metav Werkzeuge or consult the technical team for application advice. Gauge pin, single — 15.58 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin, single 15.58 mm, 50 mm is a workshop-grade check pin for quick bore verification and end-measure checks in production and inspection tasks. Workshop-grade construction Diameter 15.58 mm nominal Tolerance ±0.002 mm Length 50 mm for end-measure checks Rapid dimensional checks for routine inspection A compact tool for repetitive verification, this gauge pin delivers precision where speed and repeatability matter. The nominal 15.58 mm diameter and slim 50 mm length make it suited to rapid verification of bores and fits in assembly or inspection stages, reducing downtime by avoiding prolonged set-up. The workshop-grade design balances durability with straightforward handling, so routine go/no-go assessments can be completed with minimal auxiliary equipment. Engineered for repeatable accuracy Manufactured from special steel and finished to a ±0.002 mm tolerance, the pin provides a measurable improvement in confidence compared with generic checks. The quoted tolerance denotes close dimensional control during production; in practice this means fewer false calls and tighter control over assembly fit. For quality departments requiring compact, repeatable tools, this pin provides a robust reference for wear monitoring and first-off inspections. Practical form and handling benefits on the shop floor At 50 mm length and a mass around 0.1 kg, the tool is easy to store and handle while remaining stiff enough for reliable brief measurements. The single-pin format is intended for direct insertion checks or as part of a set of gauges for sequential testing of mating parts. Marking and SKU allow clear inventory management: M323.F58 ensures traceability and rapid identification during audits or batch checks. Choose the Metav IndustryLine gauge pin M323.F58 for dependable end-measure and bore checks — contact Metav Werkzeuge for procurement or technical clarification at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.F58 GTIN: 4061905067266 Manufacturer: Metav IndustryLine Facts Diameter: 15.58 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version Single gauge pin Intended for end-measure and bore verification FAQ What applications suit this gauge pin best? The gauge pin is designed for quick bore verification and end-measure checks in workshop and production environments; the 15.58 mm diameter and 50 mm length suit small to medium component inspection. Is the accuracy suitable for process control? With a declared tolerance of ±0.002 mm, the pin offers a level of precision appropriate for tight-fit inspections and routine quality checks in mechanical production. Which material is used for the pin and why does it matter? The pin is made from special steel; this material provides the stiffness and wear resistance needed for repeatable contact checks and robust shop-floor use. How is the product identified for inventory and traceability? Identification is provided via SKU M323.F58 and GTIN 4061905067266 for straightforward tracking in procurement and quality records. Can the pin be used as a reference for serial inspection? Yes, the pin serves as a compact reference tool for serial inspection and first-off checks, helping to detect drift or wear over production runs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.59mm Gauge Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
Take advantage of a compact, workshop-grade verification tool that combines 15.59 mm nominal diameter, 50 mm length and a tight ±0.002 mm tolerance for reliable end-measure checks; order the gauge pin directly via Metav Werkzeuge or consult their specialists for application advice. Gauge pin, single, 15.59 mm — workshop-grade, ±0.002 mm, Metav IndustryLine The gauge pin, single, 15.59 mm is a workshop-ready verification mandrel for precise bore, fit and end-measure checks in production and inspection environments Workshop-grade design Diameter 15.59 mm precision Length 50 mm for compact checks Tolerance ±0.002 mm repeatable Precision where it matters A tightly specified verification pin ensures repeatable acceptance testing and process control. The M323.F59 gauge pin delivers a nominal diameter of 15.59 mm with a permitted deviation of ±0.002 mm, making it suitable for short-run inspection tasks and quality gates where dimensional certainty is required. Constructed from special steel, the pin retains geometry under normal workshop handling and provides a stable reference for go/no-go checks and fixture alignment. The pronounced tolerance figure indicates industrial-grade repeatability that supports faster decision-making on the shop floor. Built for usability in routine inspection Compact dimensions and considered mechanical design reduce handling time and make this item easy to integrate into existing workflows. With a 50 mm effective length and a mass of approximately 0.1 kg, the pin is convenient for handheld checks and bench jigs alike. The workshop-grade execution balances stiffness and manageability so that users achieve consistent contact without excessive bulk. Where quick comparative checks, benching or fixture set-up are frequent, this format lowers cycle time while maintaining measurement integrity. Practical integration into measurement processes The pin serves multiple practical roles in production control: quick bore verification, reference for gauge blocks or plug gauges, and as a locating element in assembly fixturing. Its compact form suits tight spaces and short axial runs; the robust material choice supports repeated insertion and light contact without premature wear. When used alongside calibrated instruments, the component contributes to traceable inspection steps and helps maintain a documented quality regime across repetitive tasks, supporting a cost-effective balance between speed and precision. For tailored inspection solutions or to purchase the M323.F59 gauge pin from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for detailed technical advice and reliable European supply. Technical Data SKU: M323.F59 GTIN: 4061905068201 Brand: Metav IndustryLine Facts Diameter: 15.59 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop design Single gauge pin for end measurements Suitable for bore and fit checks FAQ What tolerance does the gauge pin provide? The gauge pin offers a tolerance of ±0.002 mm, ensuring high repeatability for end-measure inspections with the M323.F59 from Metav IndustryLine. Which material is used for the pin? The pin is made from special steel, chosen for dimensional stability and wear resistance in typical workshop applications. What is the effective length for checks? The effective length is 50 mm, which is suited to compact checks, fixture set-up and confined bore verification. Can this pin be used for assembly fixturing and locating? Yes, the rigid format and nominal diameter make the pin suitable as a locating element in jigs and short-run fixture assemblies. Is the item suitable for quick go/no-go checks on the shop floor? Designed as a workshop-grade verification tool, the gauge pin is appropriate for rapid go/no-go and fit checks that require a reliable reference. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.5mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of ±0.002 mm tolerance and a stable 50 mm gauging length to secure reproducible hole checks and precise end measurements; order the pin gauge directly via Metav Werkzeuge or ask our consultants for application advice. Pin gauge M323.F50 — single plug gauge, Ø 15.50 mm, 50 mm length (Metav IndustryLine) A Pin gauge M323.F50 designed for workshop and inspection use, suitable for fast verification of bore diameters and end‑measurement tasks in metalworking environments Precision tolerance ±0.002 mm Diameter 15.50 mm nominal 50 mm hardened length for stability Workshop-grade special steel construction High precision for reproducible dimensional checks The M323.F50 delivers industrial-class accuracy with a specified deviation of ±0.002 mm, a level of precision that supports consistent mating and assembly in production and quality control. Such a close tolerance minimises rework by ensuring that measured bores meet design intent, which translates directly into fewer rejects and less downtime. The nominal 15.50 mm diameter is presented as a stable reference, simplifying go/no‑go comparisons and reducing interpretation time during batch inspections. Robust construction for everyday shop use Manufactured in special steel and labelled as a workshop version, this gauge is engineered for repeated handling and routine checks on the shop floor. The material selection emphasises wear resistance and dimensional stability under normal workshop conditions, so calibration intervals remain predictable. The compact mass and balanced dimensions support quick placement in fixtures and gauges without excessive operator fatigue, which is important when multiple checks are required across a production shift. Practical length and handling improve measurement reliability A 50 mm overall length provides sufficient contact area to reduce bending during insertion while keeping the gauge easy to manipulate by hand or with simple fixtures. The longer contact surface helps to average out minor surface irregularities, yielding more reliable end‑position readings for both through‑holes and blind bores. Where traceable reference points are needed in testing routines, this single plug gauge serves as a repeatable standard for process control and first‑article inspection. For dependable workshop gauging rely on the Metav IndustryLine M323.F50 — order through Metav Werkzeuge or contact our advisors at Metav Werkzeuge for tailored measurement recommendations and integration support Technical data Article number: M323.F50 GTIN: 4061905070846 Brand: Metav IndustryLine Diameter: 15.50 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Material: special steel Designation: workshop version Classification: eClass 21170231 SKU: M323.F50 FAQ What level of accuracy does this pin gauge provide? The M323.F50 offers an accuracy of ±0.002 mm, making it suitable for fine inspection tasks and precision assembly checks. For which tasks is the gauge intended? The plug gauge is intended for bore verification and end‑measurement in workshop and inspection settings, supporting quick go/no‑go assessments and dimensional control. What is the nominal diameter and length of the gauge? The nominal diameter is 15.50 mm with an overall length of 50 mm, optimised for stability during insertion and measurement. Is the M323.F50 suitable for repeated shop‑floor use? Yes, the workshop-grade construction in special steel is designed for routine checks and regular handling typical of production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.61mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
The combination of high repeatability (±0.002 mm), special steel construction and a compact 50 mm length ensures reliable end‑measure checks and consistent plug fits. Order the gauge pin directly via Metav Werkzeuge or ask the consultants if clarification is required. Gauge pin M323.F61 — single test pin, Ø 15.61 mm, 50 mm length (Metav IndustryLine) A gauge pin M323.F61 designed for precise end‑measure verification and reference fits in inspection and assembly workflows Workshop version for robust use Accuracy ±0.002 mm for repeatable checks Special steel construction for wear resistance Protective transport case included Precision engineered for end‑measure checks The test pin is manufactured to an exact nominal diameter of 15.61 mm, with a specified accuracy of ±0.002 mm, delivering the dimensional certainty required in quality control and fit verification. Its compact geometry and tight tolerance reduce measurement variation when used as a reference or during assembly trials. Made from special steel, the pin resists deformation under normal handling and provides a stable contact surface that preserves gauge integrity over many cycles. This combination of material choice and dimensional control supports efficient inspection routines and shortens decision loops in production. Workshop‑ready handling and long‑term durability Built as a workshop version, the pin copes with routine use on the shop floor while remaining easy to handle. The overall length of 50 mm and a mass of approximately 0.1 kg give a convenient balance between stability and manoeuvrability for bench or fixture work. A protective transport case is supplied to reduce the risk of impact or contamination during storage and transit, helping to maintain surface quality and measurement reliability. These features mean the component is ready for immediate integration into tooling sets, inspection kits or assembly gauges without elaborate preparation. Traceability and integration into quality systems Identification and supply information are provided to support inventory and traceability: M323.F61 is listed with its GTIN, enabling straightforward recording within tracking or ERP systems. The pin is supplied as a single item and is categorised under precision gauge pins for end measurements. Its compact size and defined tolerance make it suitable as a reference for go/no‑go tests, stack‑up checks or for use inside jigs where a defined nominal diameter is required. Metav’s product documentation supports fast incorporation into inspection plans and component lists. For reliable end‑measure checks with a workshop‑grade gauge pin from Metav IndustryLine, contact Metav Werkzeuge for procurement and technical advice: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.F61 GTIN: 4061905068225 Label: Gauge pin, single, 15.61 mm, length 50 mm Core specifications Diameter: 15.61 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Workshop version Protective transport case included Material: Special steel Category: Messstifte (gauge pins) FAQ What nominal diameter does this gauge pin have? The gauge pin M323.F61 has a nominal diameter of 15.61 mm, specified for precise end‑measure applications. What tolerance can be expected from the pin during inspection? The M323.F61 is produced to an accuracy of ±0.002 mm, which supports repeatable pass/fail checks and close‑fit measurements. Is the pin supplied ready for shop‑floor use and transport? Yes, the component is a workshop version supplied in a protective transport case to preserve surface condition and dimensional integrity. Which material is used for this gauge pin and how does it affect wear? The pin is made from special steel; this material selection enhances wear resistance and maintains sensible service life under regular handling. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.62mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the combination of high dimensional accuracy, a robust special‑steel construction and secure transport packaging for dependable inspection routines; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, Ø 15.62 mm, 50 mm length (Metav IndustryLine) The gauge pin, single, Ø 15.62 mm, 50 mm length is a workshop‑grade test pin designed for precise clearance and fit checks in production and inspection tasks. Precision ground to ±0.002 mm tolerance Diameter Ø 15.62 mm, length 50 mm Special‑steel construction, workshop version Supplied in protective transport box Consistent dimensional reliability for inspection and setup The M323.F62 gauge pin is manufactured to a ±0.002 mm dimensional tolerance, providing a reliable reference for plug, bore and clearance checks in workshop environments. Ground finishing and controlled manufacturing processes reduce profile deviation and surface defects, which supports repeatable results during assembly trials or go/no‑go testing. As a single, individual test pin, it is suitable for spot checks and for establishing reference fits where batch gauge sets are not required. The Ø 15.62 mm diameter combined with a 50 mm shank length gives a compact but stable feel when inserted into bores or used as a reference mandrel. Durable workshop construction that reduces handling risk Constructed from special steel and offered as a workshop version, this test pin resists the knocks and handling typical in production areas while preserving the functional surface finish. The chosen material balances wear resistance with cost efficiency for routine use; the modest mass and 50 mm length allow easy handling and positioning inside fixtures without compromising stability. Delivery in a protective transport box ensures the measuring surface remains clean and undamaged during storage and transit, reducing downtime for rework or repolishing and maintaining measurement confidence. Practical integration into quality workflows The single gauge pin is easy to incorporate into existing inspection routines and is compatible with standard measuring fixtures and plug gauges. Its compact dimensions make it useful for batch sampling, first‑article inspection and setting operations at assembly stations. Traceability is supported by the product identifiers, and the unit is suitable where a single, high‑precision reference is required rather than a full set. With Metav’s focus on accessible precision, the pin supports pragmatic quality assurance without excessive overhead. For workshop‑grade verification relying on Metav IndustryLine quality, contact Metav Werkzeuge for ordering and technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.F62 GTIN: 4061905068232 Label: Prüfstift, einzeln, 15,62 mm Länge 50 mm Category: Gauge pins (Messstifte) Facts Diameter: 15.62 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.10 kg Special features Material: special steel Workshop execution Supplied individually Delivered in protective transport box FAQ What is the stated dimensional tolerance of this test pin? The test pin M323.F62 (gauge pin, single) is made to a tolerance of ±0.002 mm, enabling high‑precision reference checks. Is this gauge pin suitable for routine workshop use? Yes, the workshop version is engineered from special steel and supplied in a protective transport box, making it well suited to regular inspection and assembly tasks. Can this pin be used as a substitute for a full gauge set? The single gauge pin is intended for spot checks and setup work; it provides a precise reference where a full set is unnecessary or where individual diameters are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.63mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Combine workshop-ready robustness with a tight ±0.002 mm tolerance and a precise Ø 15.63 mm diameter for consistent end‑measure checks; order via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin, single – Ø 15.63 mm, 50 mm length (Metav IndustryLine) Gauge pin M323.F63 for precise end‑measure inspection and fixture verification in industrial metrology. Ø 15.63 mm nominal diameter, engineered accuracy Tolerance ±0.002 mm for consistent measurements 50 mm length, compact workshop version Special steel construction for sustained use Repeatable accuracy for end‑measure checks This inspection pin delivers reliable repeatability thanks to a manufacturing deviation of ±0.002 mm, which keeps tolerance stacks predictable in fixture and gauge work. A nominal diameter of 15.63 mm provides a defined end‑measure datum that is easy to reference in assembly and inspection routines. Where traceable control of mating fits is required, the tight tolerance reduces rework and supports faster pass/fail decisions; the technical specification is presented in clear numerical terms so integration into existing quality processes is straightforward. Robust, workshop-ready design that reduces interruptions Built as a workshop version, the pin combines a compact 50 mm length with a specialised steel alloy to resist wear during repeated seating and handling. The modest mass and balanced geometry allow secure seating in fixtures and minimise flex during use. The construction is intended for routine metrology tasks in production and maintenance environments, offering durability without excessive bulk. Clear, measurable attributes make it simple to plan storage, handling and replacement intervals within a scheduled inspection cycle. Smooth integration into inspection routines and documentation Designed for standard metrology environments, the pin supports quick incorporation into gauge blocks, fixture checks and terminal inspections. Its single‑piece supply simplifies inventory control, and the product identifiers facilitate documentation and traceability in QA records. Compatibility with common inspection jigs is achieved by the standardised diameter and length; where a formal specification sheet or batch information is required, Metav provides comprehensive data to support calibration and quality protocols. The measured design helps lower inspection time per component, improving throughput without compromising accuracy. For workshop‑grade precision and reliable end‑measure control, request the Metav IndustryLine M323.F63 gauge pin via Metav Werkzeuge — contact our Emmerich office for technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M323.F63 GTIN: 4061905068249 Product: Test pin, single, Ø 15.63 mm, length 50 mm Brand: Metav IndustryLine Core measurements Diameter: 15.63 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Material: Special steel Workshop version Single piece supply Category: Gauge pins FAQ What diameter and tolerance does the pin have? The M323.F63 gauge pin has a nominal diameter of 15.63 mm with a declared manufacturing tolerance of ±0.002 mm. Which material is used for this inspection pin? The pin is manufactured from a special steel formulation chosen for wear resistance and dimensional stability in routine workshop use. For which inspection tasks is this pin suited? The gauge pin is intended for end‑measure checks, fixture verification and integration into gauge assemblies where a precise datum of Ø 15.63 mm and a 50 mm length are required. Is the item supplied as a single piece or in sets? Delivery is as a single piece (SKU M323.F63), simplifying replacement and inventory tracking. How can the product be identified for ordering and documentation? Use the SKU M323.F63 or GTIN 4061905068249 when ordering or recording the gauge pin in quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.64mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Benefit from workshop-grade construction, ±0.002 mm tolerance and compact dimensions for reproducible end-measure checks; order the inspection pin directly via Metav Werkzeuge or consult the specialists for application advice. Gauge pin, single, 15.64 mm diameter, 50 mm length — Inspection pin by Metav IndustryLine, ±0.002 mm tolerance Gauge pin, single, 15.64 mm diameter, 50 mm length is a workshop-grade inspection pin intended for precise end-measure checks, fixture set-up and repeatability testing in small-part metrology. Workshop-grade construction for daily use Diameter tolerance ±0.002 mm for reliable fits Solid special-steel body, hardened for wear resistance Consistent dimensional control for small components Small assemblies and precision fittings demand repeatable reference points. The ±0.002 mm tolerance on this inspection pin provides a stable datum for clearance checks and alignment tasks, reducing rework caused by fit variation. Classified in the Micro measuring range, the component’s Ø 15.64 mm and 50 mm length make it ideal where compact, stiff measuring elements are required — for example in fine mechanical subassemblies or small jig fixtures. The tight diameter tolerance minimises cumulative error when used as a reference in successive operations, supporting predictable production flow. Robust workshop design that endures daily use Built for shop-floor conditions, the pin is made from special steel with a focus on wear resistance and surface integrity. The workshop-grade finish stands up to repeated contact in go/no-go checks and alignment routines, ensuring long service life and stable contact geometry. A compact mass and balanced shape aid handheld positioning and reduce the chance of marking delicate components during inspection. Routine tactile checks and bench use remain straightforward thanks to the pin’s manageable profile and durable material selection. Integration into inspection and assembly workflows As a single inspection pin, this component functions well as a reference mandrel for fixtures, a locating element in gauging assemblies, or an end-stop for controlled positioning. When integrated into a dimensional control routine, its consistent diameter assists in verifying bore sizes, plug fits and alignment jigs quickly and reliably. The robust steel construction supports light clamping forces without plastically deforming, so repeatability between checks is maintained over time — a practical benefit for small-batch production and maintenance tasks. Practical handling and identification The item is supplied as a single inspection pin with clearly traceable identifiers for inventory and process control. Its compact format simplifies storage and handling in busy workshops where space and organisation matter. Marking and labelling are compatible with standard shop-floor tagging systems, which helps to maintain traceability across inspection steps and to document the use of calibrated references during quality checks. Reliability backed by experienced distribution Sourcing precision tools from a trusted partner reduces procurement risk. Metav’s distribution combines broad product availability with technical competence, supporting selection, documentation and reliable supply. The inspection pin’s stable geometry and material choice complement a pragmatic approach to metrology: effective, understandable tools that are easy to integrate into existing quality procedures and that provide measurable benefits in repeatability and reduced set-up time. For tailored advice or to secure this Metav IndustryLine gauge pin for precision workshop tasks, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: M323.F64 GTIN: 4061905068256 SKU: M323.F64 Weight: 0.1 kg Facts Diameter: 15.64 mm Length: 50 mm Tolerance: ±0.002 mm Material mass: 0.1 kg Special features Material: Special steel Workshop version Single inspection pin Classification: Micro measuring range (10–100 mm) FAQ What is the intended use for this inspection pin? The inspection pin is intended for end-measure checks, fixture alignment and plug-type gauging in small-part metrology, where a compact, stiff reference is required. What tolerance and repeatability can be expected? The gauge pin is specified with a tolerance of ±0.002 mm, delivering a reliable reference diameter for repeatable fits and alignment checks. Which materials is the pin suitable for contacting? Constructed from special steel, the pin is suitable for use against typical workshop metals and components where hard contact is acceptable; care is advised with soft or highly finished surfaces to avoid marking. Is this item suitable for fixture locating and smaller bores? Yes — with its Ø 15.64 mm diameter and 50 mm length, the pin serves well as a locating element in fixtures and for verifying smaller bores within the micro measuring range. How is the item identified for inventory and traceability? The product is supplied as a single inspection pin with the SKU M323.F64 and GTIN 4061905068256 for straightforward traceability in quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.65mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Optimise inspection and setting processes by using a precisely machined gauge pin with a tight ±0.002 mm tolerance and robust special steel construction; the compact 15.65 mm diameter and 50 mm length support repeatable end‑measurement tasks. Order the part directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.F65 — single inspection pin, 15.65 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin M323.F65 is a workshop‑grade inspection pin designed for accurate end measurements and setting operations in production, toolmaking and quality control applications. ±0.002 mm inspection tolerance Special steel for consistent durability 15.65 mm diameter, 50 mm length Workshop-grade single pin Precise inspection where repeatability matters Manufactured for dimensional control, this gauge pin delivers a verified positional precision of ±0.002 mm, which reduces measurement uncertainty during routine checks and setup processes. The combination of a controlled diameter of 15.65 mm and a working length of 50 mm provides a compact reference that is easy to handle while maintaining the stiffness needed for repeatable end‑measurement tasks. For workshop and small series production, such accuracy shortens inspection times and supports quicker process decisions, translating into measurable efficiency gains on the shop floor. Robust construction for everyday workshop use Built from special steel, the single‑piece design resists wear from frequent seating and unseating in gauges and jigs. The workshop configuration focuses on practicality: straightforward geometry for reliable seating, a manageable weight of 0.1 kg for safe handling, and a finish that maintains form under normal workshop conditions. These attributes make the component suitable as a reference pin for setting fixtures and verifying bore sizes, where durability and stable contact geometry are essential for maintaining control limits. Practical applications and quality assurance benefits This inspection pin suits end‑mass checks, gauge setting and reference measurements in machining, assembly and check‑fixtures. The compact dimensions and high tolerance make the component especially useful for tooling shops and maintenance departments that require a stable datum without the bulk of larger measuring aids. By integrating such a pin into a standard inspection routine, traceability of setup and a reduction in setup variation can be achieved, supporting consistent part quality across runs. Contact Metav Werkzeuge to discuss the M323.F65 gauge pin for precise end‑measurement workflows or to request detailed specification sheets from Metav IndustryLine Technical data Article number: M323.F65 GTIN: 4061905068263 Label: Gauge pin, single, 15.65 mm Ø, 50 mm length Facts Diameter: 15.65 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm ECLASS: 21170231 Special features Material: Special steel Workshop version Single-piece inspection pin Intended for end-measurements FAQ What tolerance does the pin offer? The M323.F65 gauge pin is specified to ±0.002 mm, providing high repeatability for inspection and setting tasks. Which measurements is this pin intended for? This inspection pin is intended for end‑measurements, gauge setting and reference checks in machining and tooling environments. What are the exact dimensions of the pin? The pin has a diameter of 15.65 mm and an overall length of 50 mm as supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.66mm Gauge Pin, Workshop Version, 50mm Length - Metav IndustryLine
Take advantage of ±0.002 mm repeatability and robust special steel construction for reliable end‑dimension checks; the compact design and 50 mm length simplify fixture set‑up and inspection routines. Order the part directly via Metav Werkzeuge or consult the team for suitability and stock information. Test pin, single — Ø 15.66 mm, 50 mm length (Metav IndustryLine) The Test pin, single, 15.66 mm diameter, 50 mm length is a workshop‑grade inspection pin for precise end‑dimension verification and fixture alignment in mechanical workshops. Workshop‑grade construction Diameter 15.66 mm for end‑dimension checks Dimensional accuracy ±0.002 mm Delivered in protective case Consistent precision that reduces rework The compact inspection pin delivers an accuracy of ±0.002 mm, making it suitable where repeatable end‑dimension verification is essential. With a nominal diameter of 15.66 mm and a shaft length of 50 mm, this component provides a stable datum for pass/fail checks and gauging routines. Classified in the Micro range for calipers and pins (max. range 10–100 mm), it bridges fine measurement tasks and routine workshop inspection without the handling issues of larger gauges. Designed for workshop use and longevity Manufactured from special steel, the workshop version is finished to withstand regular handling and resist wear under standard workshop conditions. The compact mass and short shaft length reduce bending and enable quick placement in fixtures and nests. Delivered in a protective case, the pin arrives ready for secure storage and transport, preserving collar and diameter integrity between uses. Easy to fit into inspection workflows As a dedicated inspection pin, the component integrates into plug‑gage tests, go/no‑go fixtures and final assembly checks. Traceable identification via SKU M323.F66 and GTIN are suitable for stock keeping and process documentation. The pin’s restrained geometry helps technicians achieve fast, repeatable positioning during batch checks, contributing directly to throughput and reduced rework time. Metav support and quality assurance Sourced from Metav IndustryLine and supplied through Metav Werkzeuge, the product benefits from a European quality filter and reliable logistics. Metav’s offering aims to democratise precision by combining specialist metrology know‑how with broad availability and consistent quality control—attributes that help workshops scale inspection without compromise. For workshop metrology requiring compact, high‑repeatability inspection hardware, choose the Metav IndustryLine test pin (M323.F66) and contact Metav Werkzeuge for availability and technical advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M323.F66 GTIN: 4061905069130 Category: Messstifte (inspection pins) ECLASS: 21170231 Facts Diameter: 15.66 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg SKU: M323.F66 Special features Material: special steel Workshop configuration Delivered in protective case Compact design for fixture use FAQ What is the intended use for this inspection pin? The inspection pin is designed for end‑dimension verification, fixture alignment and plug‑gage checks in workshop metrology; the M323.F66 is intended as a compact, repeatable datum for pass/fail routines. How precise is the pin and how does that affect measurements? With a stated accuracy of ±0.002 mm, the pin provides tight repeatability that reduces measurement uncertainty and helps prevent rework in production checks. Is the pin supplied ready for storage and transport? Yes, the pin is supplied in a protective case to preserve the diameter and surface finish during storage and transport. Which product identifiers should be used for ordering or stock control? Use SKU M323.F66 or GTIN 4061905069130 for ordering and inventory management; these identifiers align with Metav IndustryLine documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.67mm Gauge Pin Workshop Version 50mm Length - Metav IndustryLine
Take advantage of the combination of ±0.002 mm manufacturing tolerance, special steel construction and a compact 50 mm length for dependable end‑dimension verification in workshop environments; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.F67 — single precision gauge pin, Ø 15.67 mm, 50 mm length (Metav IndustryLine) Gauge pin M323.F67 is a single inspection pin designed for end‑dimension checks and setting tasks in metalworking and fixture preparation Precision tolerance ±0.002 mm Diameter Ø 15.67 mm Length 50 mm Workshop‑grade construction Reliable verification of end dimensions for production lines The compact inspection pin provides repeatable checks of bore diameters and plug fits, reducing inspection time and scrap rates. With a diameter of 15.67 mm and a verified tolerance of ±0.002 mm, this inspection tool supports consistent go/no‑go assessment and fine adjustment of fixtures. The high dimensional fidelity translates into measurable process stability, helping to avoid rework and speed up quality control routines. Robust, workshop‑grade construction for everyday use Made from special steel, the pin is engineered for resistance against wear in routine shop use while remaining easy to handle. The 50 mm length and modest weight (0.1 kg) balance stiffness and manoeuvrability, enabling straightforward manual placement and stable seating in bores. The workshop execution ensures the component withstands repeated insertion cycles typical of setting and inspection tasks, contributing to long service life and sustained measurement performance. Simple integration into inspection and setup workflows As a single‑piece gauge pin, it slips directly into existing checking procedures and jigs, offering fast confirmation of end dimensions and assisting with set‑ups where precise locating is required. The item is part of a metric gauge pin family that complements bench gauges and plug‑gauge sets, supporting both quick on‑the‑fly checks and more formalised inspection steps. Clear identification with SKU M323.F67 aids inventory control and traceability in the workshop. Contact Metav Werkzeuge for tailored advice on the M323.F67 inspection pin and to arrange supply via our Emmerich fulfilment centre Technical Data SKU: M323.F67 GTIN: 4061905069147 eClass: 21170231 Category: Messstifte Label: Prüfstift, einzeln, 15,67 mm Länge 50 mm Facts Diameter: 15.67 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Material: special steel Application: end‑dimension checks (endmasse) Category: gauge pin / inspection pin FAQ What materials is this inspection pin made from? The inspection pin is made from special steel; the M323.F67 by Metav IndustryLine is intended for robust workshop use where wear resistance is important. Is the M323.F67 suitable for routine bore checks in a production environment? Yes, the gauge pin M323.F67 (SKU M323.F67) is designed for repetitive bore and plug checking and offers a tolerance of ±0.002 mm, making it suitable for routine inspection tasks. Can this pin be used for fixture setting and tool alignment? The single gauge pin is well suited to fixture setting and alignment duties; its 15.67 mm diameter and 50 mm length provide a stable locating reference during set‑up operations. How should the pin be stored to retain accuracy? Store the pin in a clean, dry environment and protect it from impacts; the workshop execution and special steel construction increase durability but correct storage preserves dimensional integrity. Does the product include traceability identifiers? The product is listed with GTIN 4061905069147 and identifiable via SKU M323.F67 for stock and traceability purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.68mm Gauge Pin, 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of precise end‑measurement capability and robust workshop construction to ensure repeatable inspection results; the combination of ±0.002 mm accuracy and a 15.68 mm diameter delivers tight control for component checks. Order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin M323.F68 — single inspection pin, Ø 15.68 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.F68 is a single inspection pin designed for precise diameter verification and end‑measure checks in workshop metrology. Diameter 15.68 mm precision fit Length 50 mm workshop version Tolerance ±0.002 mm for fine accuracy Made from special steel for robustness Accurate end‑measurements with minimal uncertainty A tight tolerance of ±0.002 mm ensures that inspection routines produce reproducible outcomes even when small deviations matter. The nominal 15.68 mm diameter gives a defined reference surface for plug‑style checks and end‑measure controls, reducing ambiguity in go/no‑go decisions. By using a solid measurement reference instead of approximate gauges, overall process capability improves; the specification emphasises repeatability and a measurable limit for decision making rather than subjective estimation. Durable workshop construction for consistent daily use The workshop specification and choice of special steel provide wear resistance and dimensional stability under routine handling. At 50 mm overall length the pin balances accessibility and rigidity, so measurements remain stable without excessive cantilevering. The compact mass (approximately 0.1 kg) simplifies handling while maintaining a solid feel in fixtures and testers. Such construction minimises surface damage and preserves the reference diameter across many cycles, supporting longer service intervals and predictable maintenance planning. Fits inspection workflows and supports traceable inventory control As a single pin for end‑measure applications, this inspection pin integrates simply into measuring benches, fixture checks and assembly control points. The plain geometry allows quick verification with comparators or micrometer setups and is suitable for repetitive sampling tests during production runs. Metav’s distribution ensures consistent availability and clear product identification for procurement and stock management, facilitating traceable ordering and faster replenishment of essential inspection tools. For reliable batch control and practical procurement, contact Metav Werkzeuge to specify the M323.F68 gauge pin and obtain personalised advice at info@metav-werkzeuge.com or by calling +49 2822 7131930 Technical data Article number: M323.F68 GTIN: 4061905069154 Facts Nominal diameter: 15.68 mm Length: 50 mm Tolerance / variation: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version Single inspection pin for end measurements Category: gauge pins FAQ What level of accuracy can be expected from this inspection pin? The inspection pin M323.F68 is specified with a variation of ±0.002 mm, providing fine accuracy suitable for tight end‑measure checks and repeatable workshop inspections. Which applications suit a 15.68 mm gauge pin? This diameter is intended for end‑measure verification, plug‑type checks and component diameter confirmations where a fixed reference is required during quality control. Is the pin suitable for fixture and bench use in daily production? Yes, the workshop‑specification construction and robust special steel make the pin appropriate for repetitive fixture and bench applications in a production environment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.69mm Test Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the high reproducibility offered by the 15.69 mm gauge pin combined with ±0.002 mm dimensional control and robust special‑steel construction for reliable end‑measure checks in production. Order the gauge pin directly via Metav Werkzeuge or contact the consultants for application advice. Gauge pin (single) Ø 15.69 mm — 50 mm length, Metav IndustryLine A gauge pin (single) Ø 15.69 mm designed for workshop inspection and end‑measure controls in mechanical engineering and tooling environments. Precision fit Ø 15.69 mm, tolerance ±0.002 mm 50 mm hardened test pin for inspection tasks Made from special steel for wear resistance Workshop version supplied in transport case Reliable dimensional control that reduces rework The gauge pin delivers consistent results through a nominal diameter of Ø 15.69 mm and a verified variation of ±0.002 mm, which translates into repeatable positioning for go/no‑go checks and fixture set‑up. Such tight tolerances cut down on measurement scatter and downstream rework, so quality control cycles become more efficient. Where parts are batch‑inspected or used as reference end‑stops, this level of precision ensures process stability and fewer rejected assemblies. Compact size for fine mechanical and tooling use With a length of 50 mm and a compact diameter, this test pin sits in the micro-range suitable for fine mechanical work and small‑component tooling. Pins in this size class combine reach with stiffness, making them appropriate for small jigs, gauge blocks and fixture pins where space is limited but accuracy is essential. The geometry supports axial alignment and quick insertion into locating holes, enabling faster inspection routines without compromising measurement integrity. Durable materials and workshop‑ready packaging Manufactured from special steel, the component is engineered for wear resistance in everyday workshop conditions. The workshop version specification means surface treatment and hardness are selected to withstand repeated insertion and contact with mating parts. Delivery in a transport case protects the pin during storage and logistics, preserving the calibrated geometry and preventing incidental damage between uses. Integrates cleanly into inspection workflows Designed as a straightforward reference element, the pin is compatible with common metrology tools and fixtures, supporting rapid manual checks and semi‑automated inspection stations. Using this hardened test pin as a fixed reference reduces set‑up time for comparative measurements and eases the transfer of nominal dimensions across stations. The compact mass and low handling weight support single‑operator use while maintaining positional stability during measurement. For workshop‑grade end‑measure needs, choose the Metav IndustryLine gauge pin and contact Metav Werkzeuge for tailored advice and immediate procurement via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.F69 GTIN: 4061905069161 Label: Prüfstift, einzeln, 15,69 mm Länge 50 mm Facts Diameter: 15.69 mm Length: 50 mm Weight: 0.1 kg Dimensional variation: ±0.002 mm Special features Material: special steel Workshop execution Supplied in transport case for protection Category: Gauge pin / test pin FAQ What tolerance can be expected from this gauge pin? The gauge pin provides a dimensional variation of ±0.002 mm, giving high repeatability for inspection and fixture use. Which materials is the pin suitable to work with in locating and checking operations? The test pin is made from special steel and is suited as a hardened reference for locating holes and mating parts across common workshop materials. Is the pin delivered ready for use or does it require additional finishing? The item is supplied as a workshop version and arrives ready for inspection tasks; it is protected in a transport case to preserve geometry. Can this pin be used in precision fixtures for small components? Yes, the compact dimensions and tight tolerance make it suitable for fine mechanical fixtures and end‑measure controls. What identifiers and ordering information are available for this product? Ordering details include article number M323.F69 and GTIN 4061905069161 for clear procurement and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.6mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Robust special steel construction together with ±0.002 mm dimensional accuracy and a protective transport case provide dependable end‑dimension checks and fixture alignment. Order this test pin directly via Metav Werkzeuge or consult our specialists for specification support and fast dispatch. Test pin M323.F60 — Workshop test pin, Ø 15.6 mm, 50 mm length The test pin M323.F60 is a single workshop test pin intended for precise end‑dimension inspection and secure locating within inspection fixtures and gauges Workshop‑grade special steel construction Diameter 15.6 mm for precise fits Length 50 mm for fixture compatibility Dimensional accuracy ±0.002 mm Engineered for consistent dimensional control The M323.F60 delivers high repeatability where small deviations can cascade into costly rework. With a diameter of 15.6 mm and dimensional accuracy of ±0.002 mm, the component is suitable for close‑tolerance locating and go/no‑go checks in jigs and inspection benches. The stated tolerance refers to the maximum deviation from the nominal diameter under normal measurement and handling; this level of precision supports reliable pass/fail decisions and reduces the need for secondary measuring operations. Robust finish and hardness from the special steel minimise wear and maintain the functional fit across repeated cycles. Practical workshop compatibility and handling Designed as a workshop execution, this single test pin simplifies integration into existing fixtures and test plates. The 50 mm length offers sufficient engagement for many locating tasks without adding excessive overhang, aiding stable clamping and repeatable contact. Supplied in a dedicated transport case, the pin arrives protected against knocks and contamination—beneficial for storage and safe transport between workstations. The compact mass (approx. 0.1 kg) keeps handling straightforward and supports rapid changeover during inspection routines. Clear traceability and straightforward use in inspection workflows Traceability and identification are kept simple: the item is listed under SKU M323.F60 with GTIN 4061905068218, supporting inventory and procurement processes. For metrology procedures, the ±0.002 mm specification gives a clear acceptance band for quality records, enabling concise pass/fail criteria in documentation. Where a robust locating element is required rather than a flexible probe, this solid pin performs reliably as a reference contact or end‑stop in assembly and measuring fixtures, making it a pragmatic choice for production and workshop inspection tasks. For reliable end‑dimension checks with the M323.F60, contact Metav Werkzeuge for technical advice and prompt dispatch from Emmerich Technical data Article number: M323.F60 GTIN: 4061905068218 Brand: Metav IndustryLine Material: Special steel Weight: 0.1 kg Label: Test pin, single, 15.6 mm length 50 mm Facts Diameter: 15.6 mm Length: 50 mm Dimensional accuracy: ±0.002 mm Mass: 0.1 kg Special features Workshop execution Supplied in a transport case for protection during transit Single test pin for locating and end‑dimension checks Category: Test pins FAQ What is the diameter and length of the pin? The pin has a diameter of 15.6 mm and a length of 50 mm; it is supplied as the single item M323.F60 for workshop use. What level of precision does the pin offer? The M323.F60 is specified with a dimensional accuracy of ±0.002 mm, suitable for close‑tolerance locating and inspection tasks. What material is the test pin made from? The test pin is manufactured from special steel, selected for wear resistance and stable mechanical properties in workshop environments. Is the test pin supplied ready for transport and storage? Yes, the M323.F60 is supplied in a protective transport case, which reduces the risk of handling damage and contamination during transit. How is the product identified for ordering and inventory? The item is listed under SKU M323.F60 with GTIN 4061905068218, facilitating procurement and stock control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.71mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from the combination of high mechanical accuracy (±0.002 mm), a special‑steel construction and a compact 50 mm length that supports reliable end‑measure checks in workshop environments. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed Gauge pin M323.F71 — Precision gauge pin, 15.71 mm diameter, 50 mm length Gauge pin M323.F71 is a single precision gauge pin designed for end‑measure inspection and tight tolerance checks in workshop and production settings Workshop version for robust handling Diameter 15.71 mm, toler. ±0.002 mm Length 50 mm for compact setups Delivered in a transport case Accurate tolerances for repeatable inspection results The M323.F71 is crafted to provide consistent measurement accuracy with a stated tolerance of ±0.002 mm, making it suitable for fine inspection work where repeatability matters. The tight tolerance reduces uncertainty during end‑measure checks and supports quality control activities by delivering verifiable results. Used as a reference pin on gauges and fixtures, this test pin minimises fit variation and shortens setup times, which directly contributes to process efficiency and fewer production reworks. Designed for everyday workshop use and secure handling Produced in a workshop‑grade specification, the pin combines a 50 mm length with a 15.71 mm diameter to create a compact, easy‑to‑position component for small to medium assemblies. The special‑steel material provides durability under repeated contact and resists deformation during handling. Supplied in a sturdy transport case, the pin stays protected during storage and transit, preserving its dimensional integrity between uses and prolonging service life. Micro‑category precision and practical application With a measuring diameter of 15.71 mm, the pin falls into the micro measurement category (max 10–100 mm), offering the best compromise between stiffness and accessibility for detailed end‑measure tasks. This class is ideal for components such as small housings, bores and mating parts in assemblies where space is limited but precision is essential. The compact form factor and low mass also simplify manual positioning on inspection benches and in jigging systems, supporting faster inspection cycles and reliable pass/fail decisions. Contact Metav Werkzeuge for tailored advice on the suitability of the M323.F71 gauge pin for specific inspection routines, and to arrange procurement through our Emmerich team Technical data Article number: M323.F71 GTIN: 4061905069185 Manufacturer: Metav IndustryLine Facts Diameter: 15.71 mm Length: 50 mm Tolerance/accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version Delivered in a transport case Category: Micro (measurement range 10–100 mm) FAQ What applications is this gauge pin intended for? The M323.F71 gauge pin is intended for end‑measure checks, bore gauging and fixture references where a 15.71 mm nominal diameter and ±0.002 mm tolerance are required. Is the pin suitable for repeated workshop use? Yes, the workshop version of this gauge pin, manufactured from special steel and supplied in a transport case, is designed for robust, repeated use in production environments. Does the product come with calibration? This listing does not state a specific calibration certificate; the M323.F71 is supplied ready for measurement tasks. For traceable calibration options, please consult Metav Werkzeuge. How does the micro category affect usability? Being in the micro category (measurement range 10–100 mm) means the pin balances stiffness and accessibility for fine components, making it well suited to small bores, housings and precision jigs. What is the article number for ordering and reference? Order and reference the product using article number M323.F71 (GTIN 4061905069185) when contacting Metav Werkzeuge or placing procurement requests. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.72mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
A compact workshop-grade inspection pin offering high repeatability and robust handling; the combination of a special steel body, ±0.002 mm tolerance and a protective transport case supports consistent end-size verification and reduces rework. Order the inspection pin directly via Metav Werkzeuge or request technical advice from our consultants. Inspection Pin M323.F72 — Ø 15.72 mm, 50 mm length — Metav IndustryLine The Inspection Pin M323.F72 is a workshop-grade measurement pin designed for end-dimension checks, gauge fixtures and repeatable reference points in precision production environments. Workshop version for robust use Diameter 15.72 mm for precise fit Tolerance ±0.002 mm for high accuracy Supplied in protective case for transport Reliable end-size checks with workshop durability The M323.F72 inspection pin is engineered for repeatable end-size verification, delivering a tight tolerance of ±0.002 mm that satisfies demanding inspection tasks. Its compact geometry and short overall length reduce the influence of bending and handling variation, which translates into fewer false rejects and a more stable quality process. This technical reliability supports a measurable improvement in throughput where dimensional conformity is critical. Compact dimensions, big compatibility benefits With a diameter of Ø 15.72 mm and a length of 50 mm, this pin belongs to the Micro class (10–100 mm) of measuring elements. That class is prized for providing maximum precision in a limited envelope, making it ideal for fixtures, plug gauges and end-face references where space and stiffness matter. The compact size enables integration into gauge assemblies and tooling stations without sacrificing rigidity or positional certainty. Built for everyday workshop use Manufactured from special steel and specified as a workshop version, the pin is suited to regular handling and the practical demands of production environments. The protective transport case supplied with delivery preserves surface condition during storage and transit, helping to maintain the calibrated condition of the measuring face. The construction emphasises robustness and long-term stability, which reduces maintenance intervals and supports consistent measurement results. Practical handling and process advantages Precision at this scale directly affects assembly quality and scrap rates: using a dedicated inspection pin with ±0.002 mm repeatability simplifies pass/fail checks and speeds up fixture set-up. The straightforward geometry enables quick visual alignment and easy cleaning, while the modest weight supports single-operator handling. Where multiple reference points are required, identical pins provide consistent datum locations and reduce cumulative tolerance issues in serial production. For reliable end-dimension control choose the Metav IndustryLine M323.F72 inspection pin—contact Metav Werkzeuge in Emmerich for purchasing and technical guidance to integrate this workshop-grade pin into production. Technical Data Article number: M323.F72 GTIN: 4061905069895 ECLASS: 21170231 Label: Inspection pin, single, Ø 15.72 mm, length 50 mm Manufacturer: Metav IndustryLine Dimensions & Accuracy Diameter: 15.72 mm Length: 50 mm Measuring range: 15.72 mm Tolerance / Repeatability: ±0.002 mm Weight: 0.1 kg Design & Features Material: Special steel Workshop version Supplied in protective case (for transport) Single inspection pin for end-size checks Story trigger: end-size measurements FAQ What is the primary application for this inspection pin? The M323.F72 inspection pin from Metav IndustryLine is intended for end-dimension checks, fixture references and gauge assemblies where a compact, repeatable reference is required. How precise is the inspection pin and what does that mean in practice? The pin is specified with a repeatability of ±0.002 mm, which supports high-precision checks and reduces variability in pass/fail inspections during production. Is the inspection pin delivered ready for use and protected? The M323.F72 is supplied as a single unit in a protective transport case to preserve the measuring face and surface condition during storage and movement. What material is used and is it suitable for workshop environments? Constructed from special steel and offered in a workshop version, the pin is designed for regular handling and the practical demands of production use. Can this pin be used as a datum or gauge pin in fixtures? Yes — the geometry and tight tolerance make it suitable as a reference or gauge pin in fixtures, jigs and plug-type gauges; the SKU is M323.F72 for ordering and specification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.73mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the precise diameter and repeatable length for reliable end-measure checks; the combination of ±0.002 mm accuracy and a robust special steel construction supports consistent quality control. Order via Metav Werkzeuge or contact the consultants for specification support. Gauge pin M323.F73 — single inspection pin, Ø 15.73 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.F73 is a workshop-grade inspection pin designed for end-measure checks and reference fits in metrology and production control environments. Workshop version, robust construction Diameter 15.73 mm with ±0.002 tolerance 50 mm length for end-measure references Special steel material for repeatable handling High-precision control for faster quality decisions The gauge pin delivers a measurable improvement in routine inspection tasks by combining a tight tolerance of ±0.002 mm with a defined diameter of 15.73 mm. Such dimensional certainty reduces interpretation during pass/fail checks and shortens inspection cycles, supporting a more efficient quality workflow. For operations that depend on repeatable end-measure references, the stable geometry of the pin minimises variation between operators and measuring points, translating directly into fewer rework loops and a lower rate of false rejects. Robust workshop design that stands up to daily use Manufactured from special steel, this inspection pin is specified for workshop environments where mechanical robustness and surface integrity matter. The 50 mm usable length gives a secure reference for axial positioning and end-face checks, while the compact mass aids quick handling during batch inspections. Delivery includes a protective transport case to prevent damage in transit and storage, preserving the pin’s calibration state and surface finish. The workshop version designation indicates a balance between precision and practical resilience for everyday metrology tasks. Practical application and integration in inspection routines As a dedicated end-measure reference, the pin is suitable for bore checks, reference seating, and use as a datum plug in fixture set-up. Integration into existing test rigs is straightforward thanks to the standardised diameter and length; the dimensional data facilitates fixture design and automated probing routines. By using a consistent reference component, traceability in inspection reports improves and the measurement chain becomes easier to validate. The controlled geometry and material choice support repeatable tactile and electronic checks, helping to meet internal quality plans and external audit requirements while offering operators a reliable measuring aid. For assured high-precision checks, request further details or place an order for the Metav IndustryLine gauge pin via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific inspection tasks Technical data SKU: M323.F73 GTIN: 4061905070136 Manufacturer: Metav IndustryLine Dimensions & accuracy Diameter: 15.73 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Features & applications Material: Special steel Workshop version Delivered in a protective transport case Category: Gauge pins Intended use: End-measure checks / reference fits FAQ What tolerance does the gauge pin provide? The gauge pin M323.F73 is specified with a tolerance of ±0.002 mm, making it suitable for high-precision end-measure checks in production environments. Is the pin supplied ready for inspection use? The M323.F73 is delivered ready for use and protected in a transport case; any formal calibration status will be provided if explicitly noted in the product labelling. Which applications is this inspection pin suitable for? Typical uses include bore checking, datum plug references, fixture set-up and end-measure verification where a stable, repeatable diameter and length are required. Can the gauge pin be used in automated testing setups? Yes, the standardised 15.73 mm diameter and 50 mm length make the pin compatible with many fixture and probe configurations for semi‑automated and automated inspection processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.74mm Test Pin, Length 50mm, Workshop Version - Metav IndustryLine
Precision gauge pin in special steel with a tight ±0.002 mm tolerance and a 50 mm length ensures reliable end‑dimension checks and consistent fixture alignment; its workshop‑grade construction and protective transport case protect the pin during handling and storage. Order the gauge pin directly via Metav Werkzeuge or ask our consultants for specification support. Gauge pin M323.F74 — workshop test pin, Ø 15.74 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.F74 is a workshop‑grade reference pin designed for end‑dimension verification and precise alignment tasks in production and inspection environments. Gauge pin Ø 15.74 mm, length 50 mm Precision tolerance ±0.002 mm Workshop‑grade construction, robust handling Supplied in protective transport case Reduce rework with measurable accuracy A tight tolerance of ±0.002 mm gives clear, reproducible results for end‑dimension checks and small‑bore verification, reducing uncertainty in production control. Made from special steel, the pin keeps its geometry under mechanical stress and frequent use, which supports stable repeatability across inspection runs. The combination of a defined diameter and fixed length simplifies go/no‑go assessments and makes the component suitable as a reference tool in workholding and assembly tasks. Robust handling and safe transport for daily use The workshop‑oriented design balances durability with manageable weight, helping to avoid damage during routine handling. Delivered in a protective transport case, the pin is shielded from knocks and contamination between uses, preserving its surface finish and measurement quality. The solid construction and compact form factor make storage and retrieval straightforward on busy shop floors, supporting fast inspection cycles without added downtime. Integrates seamlessly into inspection routines Designed for practical metrology, the pin fits with common gauge sets and fixture systems and supports end‑dimension verification, alignment of bores and datum checks. The clear, stable geometry facilitates quick comparison measurements and machine set‑ups, improving throughput and quality assurance. For component checks, assembly control or bench inspection, the M323.F74 acts as a dependable reference that helps standardise measurement procedures and documentable outcomes. Contact Metav Werkzeuge in Emmerich for specification support and to request the Metav IndustryLine gauge pin M323.F74, supplied ready for workshop use Technical data SKU: M323.F74 GTIN: 4061905070143 Brand: Metav IndustryLine Item description: Single gauge pin Facts Length: 50 mm Diameter: 15.74 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop design Supplied in protective transport case Suitable for end‑dimension checks and alignment FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.F74 is manufactured with a tolerance of ±0.002 mm, providing high‑precision results for end‑dimension verification and fixture alignment. Which material is used for the pin and why does it matter? The pin is made of special steel, chosen for dimensional stability and wear resistance so the tool maintains geometry during repeated use and handling. Is the gauge pin supplied ready for workshop use? Yes, the Metav IndustryLine gauge pin M323.F74 is supplied in a protective transport case to prevent damage in transit and to keep it ready for immediate use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.75mm Gauge Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
High reproducibility thanks to ±0.002 mm tolerance and a 15.75 mm diameter; the robust special steel construction and compact 50 mm length support precise plug checks and fixture validation. Order directly via Metav Werkzeuge or request consultancy for application advice. Gauge pin, single 15.75 mm, 50 mm length — Precision test pin by Metav IndustryLine A gauge pin, single 15.75 mm, engineered for accurate plug and assembly checks in metrology and production control High precision ±0.002 mm tolerance Special steel for robust wear resistance Compact 50 mm length for tight fixtures Workshop-grade execution for daily use Consistent, measurable accuracy for inspection tasks The compact plug, supplied as a gauge pin, delivers repeatable results where tight dimensional control is required. With a stated tolerance of ±0.002 mm, the pin is intended for fine tolerance checks and end‑of‑line verification in production environments. The 15.75 mm diameter is suitable for standard bore checks and dimensional references; this small but precise element reduces uncertainty when validating fits and clearances. The clear numeric specification supports traceable measurement practices and integrates into existing quality workflows that demand quantitative evidence rather than subjective judgement. Durable design to withstand workshop routines Manufactured from special steel, the pin combines surface hardness and resistance to wear to retain its dimensional integrity over repeated cycles. The 50 mm length provides a balance between handling ease and engagement depth in fixtures, while the low mass (approx. 0.1 kg) aids quick positioning without compromising stability. The workshop‑grade finish and robust alloy selection minimise maintenance downtime and extend service life in high‑throughput inspection stations, thereby reducing cost per measurement through fewer replacements. Practical integration into quality control processes As a precision test element, the pin is suitable for plug checks, assembly alignment and fixture validation within manufacturing, toolmaking and inspection labs. The clear specification and industrial build enable straightforward incorporation into go/no‑go procedures, measuring jigs and automated test rigs. Traceability is supported by the product identification and numeric data, making the item easy to reference in inspection reports and procurement lists. For users seeking dependable, repeatable performance in compact form, this gauge pin offers an efficient technical solution. For tailored advice or to source Metav IndustryLine gauge pins for production use, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for personal consultation and order support. Technical data Article number: M323.F75 GTIN: 4061905070150 Brand: Metav IndustryLine Label: Gauge pin, single, 15.75 mm, length 50 mm Facts Diameter: 15.75 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution Intended use: Plug checks and assembly verification Accuracy class: high‑precision inspection pin FAQ What dimensional tolerance can be expected from this gauge pin? The gauge pin is specified with a ±0.002 mm tolerance, making the Metav IndustryLine test pin (SKU M323.F75) suitable for high‑precision plug and assembly checks. Which material is used for the pin and why does it matter? The pin is made from special steel, chosen for wear resistance and long‑term dimensional stability during repetitive inspection cycles. Is the 50 mm length suitable for fixture and bore checks? Yes, the 50 mm length provides sufficient engagement depth for many fixture and bore verification tasks while remaining compact for tight access situations. How is the pin typically applied in production control? This precision test pin is used for plug checks, alignment validation and as a reference element in go/no‑go procedures; the clear numeric tolerance supports traceable measurement records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.76mm Test Pin, Single, 50mm Length Workshop Version - Metav IndustryLine
A compact, workshop‑grade gauge pin that combines ±0.002 mm accuracy with a Ø15.76 mm measuring diameter and a 50 mm overall length for dependable end‑measurements; order the pin directly via Metav Werkzeuge or consult our specialists for integration into quality control routines. Gauge pin, single Ø15.76 mm — 50 mm length (Metav IndustryLine) Gauge pin, single Ø15.76 mm — 50 mm length (Metav IndustryLine) is a compact, workshop execution gauge pin for precise end‑measurements and reference checks across small components Single gauge pin Ø15.76 mm High accuracy ±0.002 mm Workshop‑grade special steel Compact 50 mm length Lightweight for easy handling Precision that reduces rework and speeds inspection This gauge pin delivers precision where repeatability matters: with an accuracy of ±0.002 mm, the component becomes a reliable reference for small‑part verification and go/no‑go checks. The Ø15.76 mm dimension provides a clearly defined nominal size for end‑measurements, reducing ambiguity in pass/fail assessments. By using a fixed, calibrated master pin operators can minimise measurement scatter, shorten inspection cycles and lower the rate of downstream rework — a tangible efficiency advantage in small‑batch and series production. Robust, workshop‑grade construction for frequent use Manufactured from special steel and supplied in a workshop grade format, the pin withstands repeated insertion and handling typical of shop‑floor operations. The 50 mm overall length balances reach and stiffness: long enough for comfortable placement, yet compact enough to avoid undue flex. The compact design and lightweight mass make it easy to manoeuvre during fixture set‑up or manual inspections, while the material choice supports long service life under regular contact use. Ideal for fine mechanical and micro assembly tasks Suited to micro and precision work, this gauge pin matches the demands of watchmaking, small‑bore assemblies and precision fixturing where tight tolerances control functional fit. The geometry provides a stable contact surface that simplifies alignment and reference transfer on jigs and measuring fixtures. For workshops seeking consistent measurement standards, the fine‑dimension pin functions as a simple, durable datum that complements calipers and micrometres. Practical identification and integration data The pin is ready for immediate use in inspection workflows and is simple to document within a quality system. Its reduced handling weight supports fast repetitive checks and the clear nominal Ø15.76 mm marking aids traceable measurement records. For customers requiring additional technical clarification or assistance integrating the pin into an inspection routine, Metav Werkzeuge offers technical advice and specification support. For reliable micro‑measurement components from Metav IndustryLine, request the gauge pin M323.F76 via Metav Werkzeuge — contact the Metav team at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to confirm suitability and delivery options. Technical data Article number: M323.F76 GTIN: 4061905070167 Manufacturer: Metav IndustryLine Label: Gauge pin, single, Ø15.76 mm, length 50 mm Facts Diameter: 15.76 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg ECLASS: 21170231 Special features Material: Special steel Workshop execution Category: Gauge pins Intended use: end measurements FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.F76 from Metav IndustryLine is specified with an accuracy of ±0.002 mm, making it suitable for fine inspection tasks and tight tolerance checks. Is the pin suitable for repeated shop‑floor use? Yes, the workshop‑grade construction and special steel material of the M323.F76 gauge pin are intended for frequent handling and repetitive inspection routines. For which applications is this gauge pin most appropriate? The pin is designed for micro and small‑part applications such as precision fixturing, small‑bore checks and assembly alignment where a Ø15.76 mm reference is required. How does the pin aid traceability in quality control? The clearly defined nominal diameter and documented article number (M323.F76, GTIN 4061905070167) simplify record keeping and incorporation into inspection plans and measurement logs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.77mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
High-precision metrology for routine inspection tasks: the combination of a 15.77 mm diameter, a 50 mm length and a guaranteed ±0.002 mm dimensional accuracy delivers reproducible end‑measure checks and fast go/no‑go decisions on the shop floor. Order directly via Metav Werkzeuge or request application advice from their consultants. Gage pin M323.F77, single — 15.77 mm dia, 50 mm length (Metav IndustryLine) A gage pin M323.F77 designed for accurate dimensional verification and end‑measure inspection in workshop and quality‑control environments. Workshop‑grade execution for daily use Diameter 15.77 mm, length 50 mm Dimensional tolerance ±0.002 mm Special steel construction for durability Precision where it matters for inspection and control Engineered for reliable dimensional checks, this gage pin features a nominal diameter of 15.77 mm with a tight ±0.002 mm manufacturing tolerance. Such specification supports consistent go/no‑go evaluations and repeatable end‑measure verification in incoming inspection and production control. The small mass and compact geometry reduce the influence of handling, while the specified tolerance provides a verifiable basis for acceptance decisions and process documentation. Built for frequent workshop use and maintenance The workshop version is made from special steel and finished to withstand routine handling and indexing in fixtures or gauges. Its 50 mm functional length offers a practical balance between reach and rigidity for common inspection tasks, while the modest mass simplifies manual positioning. The robust design reduces wear in repetitive use, aiding uptime and lowering the frequency of replacement in a busy shop environment. Traceability, ordering and application fit For inventory and procurement the part is listed as SKU M323.F77 and GTIN 4061905070174, allowing straightforward integration into parts lists and procurement systems. The gage pin is suited to end‑measure and plug‑gauge applications where dimensional certainty speeds decision making on assembly lines and at inspection benches. Its workshop execution and material selection make it a pragmatic choice for maintenance departments, toolrooms and quality labs requiring durable metrology hardware. For dependable end‑measure verification, request the Metav IndustryLine gage pin M323.F77 from Metav Werkzeuge in Emmerich or consult their advisors for application guidance Technical data SKU: M323.F77 GTIN: 4061905070174 Category: Messstifte Key figures Diameter: 15.77 mm Length: 50 mm Dimensional tolerance: ±0.002 mm Weight: 0.1 kg Design and special features Workshop execution Material: special steel Single gage pin delivery Suitable for end‑measure and plug‑gauge checks FAQ Is this gage pin suitable for precision inspection? The gage pin M323.F77 is manufactured to a ±0.002 mm tolerance, making it suitable for precise end‑measure checks and repeatable go/no‑go assessments. What are the exact dimensions and identifiers? Diameter 15.77 mm, length 50 mm; SKU M323.F77; GTIN 4061905070174. Which material and finish are used? The part is produced from special steel in a workshop‑grade finish for wear resistance during routine use. How is the item supplied? Supplied as a single gage pin (single unit) and listed under SKU M323.F77. Can this gage pin be used in fixture and gauge assemblies? Yes — the combination of nominal diameter, length and tight tolerance makes it suitable for incorporation into inspection fixtures and gauge assemblies for dimensional checking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.78mm Test Pin Workshop Version 50mm Length, Special Steel - Metav IndustryLine
Take advantage of the combination of high repeatability, compact dimensions and robust workshop design for reliable end‑measure checks. The precise ±0.002 mm tolerance and special steel construction support reproducible results in routine inspection and fixture set‑up; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.F78 — Gauge pin, Ø 15.78 mm · 50 mm length · Metav IndustryLine A gauge pin designed for precise end‑measure checks and alignment tasks in workshop and inspection environments, supplied as a single, workshop‑ready component. Workshop execution, robust finish Diameter 15.78 mm precision Length 50 mm for standard checks Supplied in transport box Precision where repeatability matters The component is manufactured to a tolerance of ±0.002 mm, which ensures repeatable results for small‑bore measurements and alignment references. Classified in the micro measuring range (measuring range up to 100 mm), this design prioritises stiffness and minimal run‑out over long spans, making it suited to close‑tolerance tasks such as end‑measure verification and fixture calibration. The special steel construction contributes to dimensional stability and wear resistance, reducing variation between successive checks. Practical workshop benefits and handling At 50 mm overall length the pin balances reach with easy handling and secure seating in gauges and jigs. The workshop execution features a robust finish that tolerates frequent use and simple cleaning routines, while the modest weight supports ergonomic placement during inspection cycles. Supplied in a protective transport box, the item is ready for immediate inclusion in a shop inspection kit and can be stored safely between uses to preserve surface integrity. Integration into inspection routines and tooling As a single gauge pin, this item is suitable for direct application in plug gauges, reference checks and setup tasks where a compact, highly accurate reference is required. The tight dimensional specification simplifies pass/fail decisions in routine quality control and reduces the need for compensating adjustments in fixtures. Traceable identification and consistent material properties support predictable behaviour across repeated measurements, aiding process stability on the shop floor. For workshop-ready precision and immediate availability, contact Metav Werkzeuge for stock and application support—our Emmerich team provides tailored advice and fast supply arrangements Technical Data SKU: M323.F78 GTIN: 4061905070181 Material: Special steel Version: Workshop execution Category: Gauge pin Weight: 0.1 kg Dimensions & measurable data Diameter: 15.78 mm Length: 50 mm Accuracy: ±0.002 mm Special features Supplied in transport box Single item delivery Robust finish for workshop use FAQ What materials is this gauge pin made from? The gauge pin is made from special steel, chosen for dimensional stability and wear resistance in routine inspection and alignment tasks. What tolerance can be expected from the pin? The pin is specified with an accuracy of ±0.002 mm, suitable for repeatable end‑measure checks and high‑precision workshop applications. Is the item delivered ready for use in a workshop setting? Yes, the product is supplied as a single, workshop execution gauge pin and arrives in a protective transport box for immediate use. Which applications are typical for this gauge pin? Typical uses include plug gauge checks, fixture alignment and end‑measure verification where a compact, high‑precision reference is required. What is the product identifier for ordering? Order using SKU M323.F78 from the Metav IndustryLine range for this gauge pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.79mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Taking advantage of a compact, workshop-grade design and high dimensional accuracy, this test pin delivers repeatable results for end-measurement and inspection tasks; its ±0.002 mm tolerance and special steel construction support reliable in-process checks. Order directly via Metav Werkzeuge or contact their consultants for procurement advice. Test pin, single, 15.79 mm diameter, 50 mm length — Metav IndustryLine workshop grade with ±0.002 mm tolerance Test pin, single, 15.79 mm diameter, 50 mm length is a precision gauge pin intended for end-measurement and reference checks in workshop and inspection environments, supplied as an individual item for flexible use in fixtures and measuring assemblies. Diameter 15.79 mm, length 50 mm Tolerance ±0.002 mm industrial accuracy Workshop version for robust use Repeatable dimensional control for critical end measurements For routine inspection tasks and final dimensional checks, a compact gauge pin provides a straightforward, reproducible reference that reduces setup time and uncertainty. The M323.F79 is manufactured to a fine ±0.002 mm tolerance, enabling consistent comparison measurements and reliable pass/fail decisions when used as a reference element in fixtures or analogue jigs. The nominal 15.79 mm diameter and 50 mm length are suited to small-assembly checks and end-of-line verification where a stable reference shaft is required. By converting raw dimensions into a mechanical datum, the pin simplifies alignment and measurement processes and reduces interpretation effort during quality control. Robust workshop execution for daily handling and longevity Constructed from special steel, this single test pin is designed for workshop resilience where repeated insertion, seating and contact stresses occur. The workshop version indicates a focus on durability and practical handling: straightforward geometry, easy mounting in holders, and a weight that balances solidity with manoeuvrability. The compact form factor limits cantilever stresses during measurement and aids stable positioning in bore gauges or comparator setups. Material choice and finishing ensure the profile remains true under normal shop conditions, helping to preserve long-term dimensional stability and reduce the frequency of replacement. Easy integration into inspection routines and fixtures A single precision pin integrates cleanly into existing inspection jigs, plug gauge adaptors and bench fixtures. Its standardised diameter and length make it compatible with common localisation methods and enable swift swaps between test stations. The modest mass contributes to safe handling during repeated checks without compromising positional stability. Using a defined, calibrated reference element like this pin streamlines recording of measurement outcomes and supports consistent operator performance across shifts by providing an unambiguous mechanical datum for external or internal seating checks. Practical procurement and traceability for production environments The item is supplied as an individual test pin with clear identification for inventory and traceability. The M323.F79 is a pragmatic choice when a precise, compact reference is required for production control or small-batch inspection. Buying through Metav IndustryLine ensures access to a wide range of complementary measuring accessories and rapid replenishment from an experienced precision partner; this helps maintain steady inspection throughput without expanding supplier lists unnecessarily. For procurement or technical advice on the Metav IndustryLine test pin with ±0.002 mm accuracy, contact Metav Werkzeuge directly to discuss suitability for specific end-measurement tasks and to arrange order processing. Technical Data Article number: M323.F79 GTIN: 4061905070198 Label: Prüfstift, einzeln, 15,79 mm Länge 50 mm Facts Diameter: 15.79 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Item type: Single test pin Category: Gauge pin / Messstifte FAQ What measurement accuracy can be expected from this test pin? The M323.F79 test pin is manufactured to a ±0.002 mm specification, providing high repeatability suitable for precision end-measurement checks and reference applications. Is the pin suitable for use in standard pin holders and fixtures? Yes, the single gauge pin is designed for straightforward integration into common pin holders and fixture adaptors used in workshop inspection setups. What material is the test pin made from and how does that affect durability? The pin is made from special steel, chosen to withstand the mechanical demands of regular seating and contact in inspection tasks while maintaining dimensional stability. Can the pin be used for internal and external reference measurements? The compact geometry and defined diameter allow the pin to serve as a mechanical datum for both internal seating checks and certain external alignment tasks when used with appropriate fixtures. How is the item identified for ordering and inventory? The product is listed as M323.F79 with GTIN 4061905070198 for clear traceability and stock management. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com