Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
9.97mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
The combination of micron-level accuracy and a compact 50 mm length ensures reliable end-dimension checks in tight assemblies; robust special steel and a workshop-grade finish make this an economical choice for repeatable inspection. Order the gauge pin directly via Metav Werkzeuge or consult Metav's specialists for application advice. Gauge pin M323.997 – precision 9.97 mm, tolerance ±0.001 mm A gauge pin for precise end-dimension checks and alignment tasks in workshop and metrology environments, designed as a compact, high-accuracy measuring reference Diameter 9.97 mm with ±0.001 mm tolerance 50 mm overall length for compact fixtures Workshop version in special steel Accuracy that keeps production on spec High-precision components demand repeatable references. This measuring pin delivers a ±0.001 mm tolerance, corresponding to a 1 µm resolution class typically required for fine end-dimension verification. As a compact measuring reference with a 9.97 mm diameter, it establishes a reliable datum for plug and hole checks where small deviations lead to assembly rejects. The narrow tolerance reduces rework and supports tighter process control, making the part suitable for calibration jigs and in-process inspections. Built for frequent workshop use The workshop variant is finished from special steel to balance wear resistance with dimensional stability during repeated handling. The 50 mm shaft length provides enough engagement for secure seating while remaining short enough to avoid bending in handheld or fixture-bound operations. Supplied in a transport case, the pin is protected during storage and transit, preserving the calibrated condition of the measuring surface and preventing handling damage that would compromise measurement certainty. Practical benefits in measurement workflows Used as an end-mass or plug reference, the measuring pin simplifies GO/NO‑GO checks and alignment steps in assembly and inspection tasks. Its compact footprint integrates with tight tooling pockets and fixture bores, allowing straightforward interchangeability in gauge stacks or comparator setups. The shop-grade finish reduces the need for delicate handling procedures while maintaining the dimensional integrity required for repeatable readings and documented inspections. Integration, traceability and handling notes Marked with SKU M323.997 and GTIN 4061905063152, the pin fits standard metrology inventories and traceability systems. At 0.034 kg it is lightweight for handheld use yet sufficiently rigid for datum applications. The workshop execution and included transport case support routine storage and safe transport. For users adapting the pin into automated checking sequences, the stable geometry and high tolerance make it a dependable mechanical reference. Contact Metav Werkzeuge today to discuss application fitment or to request tailored measurement advice for this gauge pin M323.997 Technical Data Article number: M323.997 GTIN: 4061905063152 Label: Prüfstift, einzeln, 9,97mm, +/- 0.001 mm Länge 50 mm SKU: M323.997 Facts Diameter: 9.97 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.034 kg Special features Material: special steel Workshop version Supplied in transport case Precision class: 1 µm equivalent FAQ What is the intended use for this measuring pin? This gauge pin M323.997 is intended for end-dimension checks, alignment and plug-reference tasks in workshop and inspection fixtures where a 9.97 mm reference with ±0.001 mm tolerance is required. Is the pin suitable for repeated fixture use? Yes. The workshop execution and special steel construction are optimised for frequent handling and fixture integration while maintaining dimensional stability. Does this item include traceability information? The pin is listed with GTIN 4061905063152 and SKU M323.997 to support inventory and traceability in metrology records. Can the pin be used as a datum in manual and semi-automatic workflows? The compact 50 mm length and strict tolerance make it suitable as a mechanical datum in both manual checks and semi-automatic inspection setups. How is the pin delivered to protect the measuring surface? Delivery is in a transport case to protect the measuring surface during storage and transport, preserving its workshop-ready condition. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.98mm Gauge Pin Single ±0.001mm Accuracy Length 50mm Workshop Version - Metav IndustryLine
Take advantage of exceptional dimensional control and tight tolerance for reproducible end measurements; the combination of a 9.98 mm nominal diameter, ±0.001 mm tolerance and a 50 mm length supports reliable gauging in workshop inspection. Order the gauge pin directly via (Metav Werkzeuge) or ask our consultants if needed. Gauge pin M323.998 — Gauge pin for end measurements, 9.98 mm, ±0.001 mm — Metav IndustryLine A precision gauge pin designed for workshop inspection and end‑dimension verification, supplied in a transport box and made from special steel. Workshop version for daily use Diameter guaranteed at 9.98 mm Tolerance ±0.001 mm for tight control Supplied in a transport box Repeatable accuracy that stabilises inspection The 9.98 mm gauge pin provides a defined reference for end‑measurements where parts and fit are critical. With a specified ±0.001 mm deviation, this measuring dowel reduces ambiguity at pass/fail decision points and shortens inspection cycles. The high tolerance directly contributes to process consistency: fewer reworks, clearer acceptance criteria and faster throughput in production checks. The compact 50 mm length supports handling and positioning in fixtures without unnecessary overhang. Robust workshop design for everyday handling Built in a workshop version and manufactured from special steel, the pin withstands frequent use and resists minor impacts and wear typical for daily inspection routines. The solid construction keeps form stability and surface integrity for longer service life, which benefits maintenance schedules and lowers replacement frequency. Supplied in a transport box, the pin arrives protected for storage and safe transfer between workstations, ensuring the reference surface remains intact until use. Simple integration into existing inspection workflows The gauge pin fits directly into manual and optical gauging jigs as a fixed‑diameter reference or assembly aid. Its geometry is straightforward to combine with micrometres, callipers and plug gauges for comparative checks. Traceable identification (SKU M323.998 and GTIN 4061905063169) simplifies inventory control and documentation inside inspection plans. For applications demanding defined end measurements, this pin is a pragmatic tool that balances precision, durability and ease of use. Discuss procurement options and application details with Metav Werkzeuge — contact our specialists in Emmerich for tailored advice or to request a formal quotation by email or phone Technical data Article number: M323.998 GTIN: 4061905063169 Material: special steel Facts Diameter: 9.98 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.034 kg Special features Workshop version Delivered in a transport box for safe transport and storage Category: Gauge pins SKU: M323.998 FAQ What is the primary use of this gauge pin? The gauge pin is intended as a fixed‑diameter reference for end measurements and verification tasks; the M323.998 is suitable for repeatable pass/fail checks and fixture setting. Is the tolerance tight enough for precision inspection tasks? Yes, the ±0.001 mm tolerance makes this pin appropriate where sub‑millimetre precision and strict acceptance criteria are required. Can the pin be used in automated inspection fixtures? The gauge pin’s defined geometry and short length allow integration into manual and semi‑automated fixtures; compatibility depends on fixture design and clamping method. What material is the pin made from and why does it matter? Manufactured from special steel, the pin offers enhanced wear resistance and dimensional stability under normal workshop conditions. How is the gauge pin supplied to protect the reference surface during transport? The pin is supplied in a transport box to protect the measuring faces during handling and storage, ensuring the reference surface remains intact. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.99mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of pinpoint inspection and fast, repeatable checks thanks to the combination of industrial accuracy, robust special steel construction and compact 50 mm length; order the gauge pin directly via Metav Werkzeuge or speak to our consultants for advice. M323.999 Gauge Pin — precision test pin, 9.99 mm, ±0.001 mm A M323.999 gauge pin designed for end‑dimension verification and fine inspection tasks in workshop and inspection environments. 9.99 mm nominal diameter, tolerance ±0.001 mm Hardened special steel construction Length 50 mm for compact checks Supplied in protective transport box High-precision checks without compromise The compact test pin delivers a nominal diameter of 9.99 mm with an exceptional tolerance of ±0.001 mm, enabling reliable end‑dimension verification for tight‑tolerance assemblies. The small form factor supports quick comparison and go/no‑go fits where repeatability matters; operators benefit from reduced inspection time and fewer reworked parts. The hardened special steel body preserves the measuring surface against wear, maintaining long‑term accuracy in daily shop use. Built for workshop conditions and efficient workflows Engineered as a workshop execution, the pin withstands the knocks and handling typical of production environments while keeping measurement quality stable. The 50 mm length is deliberately compact to ease access into confined features and to simplify handling during quick checks. Supplied in a transport box, the pin can be stored and transported safely between inspection benches without risk to the calibrated measuring face, supporting uninterrupted workflow and less downtime. Clear benefits for quality assurance and process control Used as a gauge for final dimensions and assembly checks, this precision pin supports faster decision‑making on the shop floor: immediate pass/fail assessment reduces throughput bottlenecks and contributes to consistent product quality. The robust material and tight tolerance make the pin suitable for repeat inspections of small mechanical parts, ensuring that tolerance stacks remain controlled and that end products meet specification requirements. Contact Metav Werkzeuge today to discuss how the M323.999 gauge pin can tighten inspection routines in your workshop and to arrange supply directly from Metav Werkzeuge in Emmerich Technical data Article number: M323.999 GTIN: 4061905063176 Brand: Metav IndustryLine Facts Diameter: 9.99 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.034 kg Special features Material: special steel Workshop execution (Werkstatt‑Ausführung) Supplied in transport box (plastic or wooden) Category: Gauge pins / Messstifte FAQ What is the nominal size and tolerance of this gauge pin? The gauge pin has a nominal diameter of 9.99 mm with a tolerance of ±0.001 mm, suitable for high‑precision end‑dimension checks. Is the pin suitable for everyday workshop use? Yes, the workshop execution and special steel construction make the pin robust for frequent handling and routine inspections. How is the product delivered for safe handling? The gauge pin is supplied in a protective transport box (plastic or wooden), intended to protect the measuring surface during storage and transport. Can this gauge pin be used for final assembly checks? The M323.999 gauge pin is intended for end‑dimension verification and small‑part assembly checks where a tight tolerance of ±0.001 mm is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.9mm Gauge Pin Single ±0.001 mm Length 50 mm, Workshop Version - Metav IndustryLine
Take advantage of precise final-dimension verification with a compact inspection pin: the combination of ±0.001 mm tolerance, robust special-steel construction and workshop-ready packaging ensures reliable repeatability and straightforward handling on the shop floor. Order the gauge pin directly via Metav Werkzeuge or ask our consultants for delivery and availability. Gauge pin M323.990 — single inspection pin, 9.90 mm, ±0.001 mm (Metav IndustryLine) A Gauge pin M323.990 designed for final-dimension verification and routine workshop inspection tasks. Workshop-grade construction High-precision tolerance ±0.001 mm 50 mm length for stable handling Repeatable micrometre-level verification for less waste The compact inspection pin delivers a diameter of 9.90 mm with a tight tolerance of ±0.001 mm, providing the stability required for repeatable end-dimension checks. Such precision reduces the need for corrective rework and supports consistent quality control in production and inspection loops. The small mass and defined geometry mean contact conditions are repeatable, which lowers measurement scatter and helps maintain process capability across batches. Robust, workshop-ready design that speeds workflow Manufactured from special steel, this single gauge pin is specified as a workshop version and resists the knocks and handling typical for daily use. The 50 mm length balances reach and rigidity so that the pin sits stably in fixtures or jigs while remaining easy to manipulate. Delivery in a protective box simplifies storage and transport between stations, protecting the reference surface and helping to keep calibration cycles longer and more reliable. Easy deployment in inspection routines and traceable sourcing The pin is supplied as a single inspection tool and integrates simply into go/no-go testing, stackable gauge sets or comparator fixtures where an exact end dimension is required. The small footprint and clear article identification support rapid picking from stock and reduce search times on the shop floor. Sourced via Metav IndustryLine, this component benefits from a European distribution channel that emphasises consistent quality control and dependable logistics for production-critical tools. For Metav IndustryLine precision and stock information, contact Metav Werkzeuge for availability and delivery from Emmerich. Technical data Article number: M323.990 GTIN: 4061905062179 Label: Prüfstift, einzeln, 9,90mm, +/- 0.001 mm Länge 50 mm SKU: M323.990 Facts Diameter: 9.90 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.034 kg Measuring range: 9.9 mm Special features Material: Special steel Workshop version Delivered in protective box Category: Gauge pins Intended use: Final-dimension verification (end dimensions) FAQ Is a calibration certificate included with the gauge pin? No calibration certificate is supplied with this gauge pin by default; the component is manufactured to a ±0.001 mm tolerance and identified as M323.990 for traceability. Which materials is the pin suitable for measuring? The inspection pin M323.990 is a measurement artefact and is used to verify dimensional features; the special steel construction refers to the pin material, not the workpiece compatibility. Can the pin be used in a set or fixture for go/no-go tests? Yes, the single gauge pin M323.990 is suitable for integration into fixture-based checks and gauge sets for end-dimension verification. How is the gauge pin delivered and protected in transit? The pin is supplied in a protective box to shield the reference surfaces during transport and storage. What information identifies this product for reordering? Use the article number M323.990 or the GTIN 4061905062179 when reordering to ensure the correct inspection pin is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9–10mm Gauge Pin Set 100pcs 70mm Step 0.01mm, Special Steel, Boxed - Metav IndustryLine
Reliable dimensional control is achieved through the combination of 0.01 mm gradation, a 9.00–10.00 mm size range and a matched 100-piece configuration, enabling fast, repeatable go/no‑go checks in production. Order the pin gauge set directly via Metav Werkzeuge or consult our technical advisors for specification support. Pin gauge set M318.859 — Metav IndustryLine (100-piece, 9.00–10.00 mm, 0.01 mm) The Pin gauge set M318.859 provides matched pins in the 9.00–10.00 mm range with 0.01 mm increments, designed for precision inspection and quick acceptance tests in machining and quality control. 0.01 mm gradation for fine tolerance checks Size range 9.00–10.00 mm for small-bore inspection 70 mm length for secure engagement in bores Delivered in protective transport case Consistent accuracy for production‑grade inspection A matched pin set with 0.01 mm steps offers a straightforward, reliable method to verify hole diameters and fit tolerances without complex equipment. The set’s fine gradation reduces interpretation error and accelerates decision-making on the shop floor: operators can perform stepwise checks and immediately determine whether a component meets nominal dimensions or requires rework. Built from special steel, the pins combine wear resistance with dimensional stability, which helps maintain consistent measurement quality over many inspection cycles. Practical handling and process benefits Each pin measures 70 mm in length, providing sufficient engagement depth to reduce measurement uncertainty in through‑holes and deeper bores. The matched nature of the set—delivered as a 100-piece kit—supports rapid sampling across batches, which minimises machine downtime and speeds up in‑process control. The compact organisation inside a protective transport case preserves set order and prevents loss of individual pins during storage or transfer between workstations, supporting efficient workflow and traceable inspection routines. Integration into quality workflows and traceability As a straightforward go/no‑go tool, the pin gauge set integrates seamlessly into quality plans and first-off inspections. The numeric gradation and fixed sizes simplify documentation and reporting: a single line in an inspection sheet can record the smallest acceptable pin or the first non‑passing size, enabling clear communication between inspection, production and engineering. For environments that demand repeatability, the special steel composition and dimensional matching are practical assets when establishing a robust measurement routine or defining control limits. Why this kit suits precision workshops Precision workshops, toolrooms and small-bore production lines benefit from the set’s balance of range and resolution. The 9.00–10.00 mm scope addresses many common bore diameters found in hydraulic components, fastener seats and small housings, while the 0.01 mm step size supports fine adjustment work during finishing and honing. The arrangement supports both quick pass/fail checks and more methodical narrowing‑down of machining errors, reducing scrap rates and aligning with lean quality principles. Choose the Metav IndustryLine pin gauge set for dependable dimensional control and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored technical advice and supply Technical Data Article number: M318.859 GTIN: 4054469182117 Weight: 5.5 kg Length: 70 mm Measuring range: 9.00–10.00 mm Gradation: 0.01 mm Pieces per set: 100 Facts Material: Special steel Delivered in protective transport case Category: Gauges (Lehren) Set type: Matched pin gauge set Special features Precise 0.01 mm stepping for tolerance control Suitable for small-bore inspection and go/no‑go testing Robust organisation for storage and transport Ideal for shop‑floor sampling and process control FAQ What sizes are included in the pin gauge set? The pin gauge set contains matched pins across the 9.00–10.00 mm range with 0.01 mm increments for fine gradation checks. What material are the pins made from? Pins in this Metav IndustryLine set are made from special steel, chosen for wear resistance and dimensional stability in regular inspection use. Is the set suitable for deep‑bore measurements? With a pin length of 70 mm, the set is well suited to engage through‑holes and deeper bores while keeping measurement uncertainty low. How is the kit supplied and stored? The set is supplied organised in a protective transport case, preserving pin order, preventing damage and easing handling across workstations. Can the pin gauge set be used for go/no‑go checks on production parts? Yes; the matched sizes and 0.01 mm stepping make the set ideal for rapid go/no‑go checks and routine dimensional verification during production. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9–10mm Gauge Pin Set 70mm Step 0.05mm, 21 Pieces Plastic Case - Metav IndustryLine
Combine 0.05 mm increments, special steel construction and a compact 70 mm pin length for fast, repeatable dimensional checks; order the set directly via Metav Werkzeuge or consult our advisors if guidance is required. Pin gauge set M318.829 — 21-piece, 9.00–10.00 mm, 70 mm pins (Metav IndustryLine) The pin gauge set M318.829 is a precision 21-piece plug-pin set intended for verification of small bores and dimensional checks in workshop and inspection environments. Precision pins 9.00–10.00 mm in 0.05 mm steps 21-piece set for incremental gauge checks 70 mm pin length for deep bore measurements Supplied in protective transport case Fast, repeatable checks for small-bore inspection The 21-piece plug-pin collection enables straightforward verification of bore diameters within the 9.00–10.00 mm range using systematic 0.05 mm increments. Designed for shop-floor inspection routines, the set supports rapid pass/fail decisions and stepwise narrowing of tolerances. The compact pin length is deliberately chosen to reach moderate depths while keeping handling comfortable and measurement times short. This combination of consistent increments and ergonomic dimensions reduces setup time and increases throughput during serial checks. Robust material and measured performance for everyday use Manufactured from special steel, the pins offer a durable contact surface that withstands repeated use in production and quality-control environments. The material choice balances wear resistance with machinability, ensuring long-term dimensional stability under normal workshop conditions. Where traceable calibration is required, the set can be integrated into existing inspection routines; the inherent precision of the 0.05 mm steps simplifies documentation of measurement progress and supports clear communication across quality teams. Organised set and secure transport for reliable inventory handling The pins are supplied as a complete 21-piece set in a protective transport case, which keeps items organised and ready for inspection tasks. The case facilitates safe storage and reduces the risk of individual loss or damage during transport between workstations or to an inspection bench. For workshops aiming to streamline inspection logistics, the compact kit format makes it straightforward to issue a complete gauge set to a team or bench without additional preparation. Contact Metav Werkzeuge for application advice and immediate availability from Emmerich, or request technical guidance from our consultants at Metav Werkzeuge if compatibility with specific inspection routines needs clarification Technical data Article number: M318.829 GTIN: 4054469182018 Manufacturer: Metav IndustryLine Facts Pin length: 70 mm Measuring range: 9.00–10.00 mm Increment: 0.05 mm Set quantity: 21 pins Weight: 1.47 kg Special features Material: special steel Delivered in protective transport case Graduated in 0.05 mm steps FAQ What sizes are included in the set? The pin gauge set M318.829 comprises pins covering the 9.00–10.00 mm range in 0.05 mm increments for systematic diameter checks. How many pieces are supplied and what is the pin length? A complete 21-piece set is supplied, each pin having a length of 70 mm to permit checks at moderate depths. Is the material specified for industrial use? The pins are produced from special steel, chosen for wear resistance and stability under regular workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Calibration Certificate For Gauge Pin Set - Metav IndustryLine
Take advantage of a documented, traceable calibration that delivers measurable confidence and supports quality workflows; the calibration certificate provides recorded measurement results and formal documentation to integrate into inspection routines. Order the calibration service directly via Metav Werkzeuge or consult the Metav team for specification alignment. Calibration Certificate — traceable calibration for measuring instruments (Metav IndustryLine) A Calibration Certificate that documents the traceable adjustment and measurement results of workshop and inspection tools, suitable for integration into production quality systems. Traceable calibration certificate Documented measurement results Ideal for workshop and quality control Measurable confidence for production and inspection A formal, traceable calibration delivers objective evidence that a measuring tool meets defined tolerances. The issued certificate records the measured values and the conditions under which the measurement was performed, enabling direct use in manufacturing records and quality reports. By relying on documented calibration, inspection cycles become reproducible and measurement uncertainty is reduced, which supports faster decision-making on the shop floor and in the quality lab. How calibration benefits process reliability Calibration aligns a tool with recognised references so that measurement data can be compared across time and locations. The primary benefit is improved measurement reliability, which reduces rework and scrap by ensuring that parts are judged consistently against specifications. For production environments and inspection benches, a documented calibration also simplifies compliance with internal and external audits and strengthens supplier quality assurance chains. What the certificate contains and how it is used The delivered certificate lists the identifying data, measured values and the method used during calibration, creating a permanent record for traceability and audit trails. Typical uses include baseline entry into quality management systems, verification of incoming inspection equipment, and evidence for periodic reassessment. Where required, the document can be filed alongside inspection plans to demonstrate conformity and maintain process continuity. For a documented calibration from Metav IndustryLine and clear traceability to integrate into quality assurance processes, request the calibration certificate via Metav Werkzeuge by emailing info@metav-werkzeuge.com or calling +49 2822 7131930 Technical Data Article number: MKali.672 GTIN: 4061905050558 eClass: 25149002 Facts Weight: 0 kg SKU: MKali.672 Special features Category: Kalibrierung von Messwerkzeugen Manufacturer: Metav IndustryLine FAQ What information is recorded on the calibration certificate? The calibration certificate records the measured values, reference standards used and the conditions of the measurement; the Calibration Certificate issued by Metav IndustryLine (SKU MKali.672) provides this documented evidence for quality records. Is the calibration traceable to recognised references? Yes, the Calibration Certificate documents traceability to recognised reference standards and enables comparison of measurement results over time. Can the certificate be used during audits? The certificate serves as documented evidence in audits and quality assessments, demonstrating that measuring tools were calibrated and measured values were recorded. Which instruments are covered by this type of certificate? This certificate is intended for measuring instruments used in workshop and inspection contexts; the scope is specified on the issued document. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Calibration Certificate For Gauge Pin Set - Metav IndustryLine
Take advantage of certified measurement documentation and traceable results to secure reproducible quality checks and smoother acceptance of gauge pin sets. Combined with Metav Werkzeuge's local quality filter in Emmerich, this calibration service supports reliable inspection routines and audit readiness. Order the calibration directly via Metav Werkzeuge or ask our consultants for advice. Calibration certificate for gauge pin set — traceable measurement documentation (Metav IndustryLine) A calibration certificate for a gauge pin set that documents measured values, tolerances and traceability for use in inspection and quality control Traceable measurement results included Documented values and uncertainty statement Delivered together with the gauge pin set Reduce measurement risk with documented, traceable data A formally issued calibration certificate supplies verifiable measurement evidence that supports production control and incoming inspection. By documenting measured diameters, indicated tolerances and an uncertainty statement, the report reduces interpretation errors during acceptance checks and production releases. The clear documentation strengthens quality assurance and shortens decision loops for parts that require dimensional verification. Ready-to-use documentation for audits and quality records The calibration report presents measured values in a compact, machine-readable layout together with procedural metadata that auditors expect. Information typically includes measurement points, observed deviations, an uncertainty assessment and the technician's identification, enabling direct incorporation into inspection logs and traceability chains. Inclusion of the certificate with the delivery simplifies supplier declarations and helps to meet internal and external audit requirements. Integrates with routine inspection and planning Documented calibration results make it easier to plan follow-up inspections and to define re‑calibration intervals based on actual drift rather than guesswork. The certificate supports consistent inspection criteria across shifts and sites, helping to avoid unnecessary rework and to maintain reproducible production quality. Where measurement trends are relevant, the documented data can be used to trigger preventive maintenance or process adjustments. Arrange the calibration documentation for MKali.673 with Metav Werkzeuge’s Emmerich quality centre to ensure traceable measurement records and audit-ready reports Technical data SKU: MKali.673 GTIN: 4061905050572 ECLASS: 25149002 Manufacturer: Metav IndustryLine Weight: 0 kg Facts Item identifier: MKali.673 Classification: Calibration of measuring tools GTIN number for logistics and records: 4061905050572 Scope & features Calibration certificate for a gauge pin set Includes measured values and uncertainty statement Delivered with the product for documentation and audits Suitable for integration into inspection records FAQ What is covered by the calibration certificate? The certificate documents the measured values, associated tolerances and an uncertainty statement for the gauge pin set; the report supplied with MKali.673 records the inspection results used for acceptance and quality control. Is the calibration traceable to recognised standards? The issued calibration provides traceable measurement results that support traceability chains and acceptance criteria used in quality systems; the report facilitates reference to the relevant measurement standards. How are the measurement results presented? Results are presented as measured values with their tolerances and an uncertainty assessment, plus procedural metadata such as measurement method, date and technician identification to support audit trails for MKali.673. How often should recalibration be scheduled? Re‑calibration intervals depend on usage intensity, environmental conditions and internal quality policy; common practice is to reassess annually or sooner if measurements indicate drift. Can the certificate be used in supplier or incoming inspections? Yes, the calibration documentation accompanying MKali.673 is intended for direct use in incoming inspection records and audit evidence, simplifying acceptance procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Calibration Certificate For Gauge Pin Set - Metav IndustryLine
Reliable, traceable measurement documentation for a gauge pin set supports quality assurance and audit readiness; the certificate records measured values and the lab reference together with an identifiable article number. Benefit from professional documentation and clear traceability — order the calibration certificate directly via Metav Werkzeuge or ask our consultants if needed. Calibration certificate for gauge pin set — traceable calibration documentation (Metav IndustryLine) The Calibration certificate confirms measured values and traceability for a gauge pin set used in inspection, incoming control and quality assurance processes. Traceable measurement record Calibration for gauge pin sets Issued by Metav IndustryLine Assured traceability for inspection and audit purposes A formal calibration certificate provides an auditable record of measured values and their context, creating verifiable traceability between the measuring artefact and its original reference. For organisations that rely on gauge pin sets in inspection or setting fixtures, documented evidence of calibration supports conformity assessments and internal quality audit processes. The certificate lists the item identity and measured deviations in a concise format, enabling consistent decision making without ambiguity. What the calibration documentation contains and why it matters The report generally includes the identification of the calibrated item, the measured data, the date of calibration and the issuing laboratory reference, presented so that measurement results can be compared over time. This structured documentation transforms simple gauges into quality-assured tools: recorded measurement results reduce uncertainty in acceptance decisions and help to identify trends that could signal wear or damage. For batch inspections and traceability chains, the certificate is an essential piece of quality evidence. Integration into workshop workflows and supplier chains A calibration record issued by a recognised metrology supplier such as Metav IndustryLine eases the integration of measurement status into production and procurement workflows. The documented condition of a gauge pin set reduces rework caused by uncertain tooling and supports supplier or customer audits with clear, retrievable information. For organisations consolidating suppliers, centralising calibration through a reliable partner brings administrative clarity and long-term operational consistency. For formal traceability and audit-ready documentation, request the calibration certificate via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to arrange calibration and documentation support Technical data Article number: MKali.671 GTIN: 4061905050534 ECLASS: 25149002 Identifiers & codes SKU: MKali.671 Category: Calibration of measuring tools Features & scope Calibration certificate for gauge pin set Suitable for inspection and incoming control documentation Issued by Metav IndustryLine FAQ What information is recorded on the calibration certificate? The calibration certificate records identification of the measured item, the measured values, calibration date and the issuing laboratory reference for the Calibration certificate for gauge pin set (MKali.671) Does the certificate prove traceability for audits? Yes, the certificate issued by Metav IndustryLine documents traceability and provides a written record suitable for audit trails and internal quality records. Which items does this certificate cover? This calibration certificate applies to the specified gauge pin set and documents the measured values and item identification as supplied with the service. How often should gauge pin sets be recalibrated? Recalibration intervals depend on usage, process risk and internal quality policy; the Calibration certificate for gauge pin set (MKali.671) helps establish a baseline against which frequency decisions can be made. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Calibration Certificate for Gauge Pin Set - Metav IndustryLine
Ensure documented verification and traceability for gauge pin sets with an official calibration record and clear identification; benefit from controlled quality processes and audit-ready paperwork. Order the calibration certificate directly via Metav Werkzeuge or consult our technical advisors for specific measurement requirements. Calibration certificate for gauge pin set — traceable verification document The Calibration certificate provides an official record for a gauge pin set, confirming the scope and status of the measurement verification for use in quality control and inspection tasks. Official calibration certificate for measuring tools Gauge pin set verification and traceability Supplied as standard measurement documentation Assured traceability for precision pins and records A formal calibration certificate acts as the central document that links a gauge pin set to a verified inspection event, delivering measurable assurance for production and quality-control decisions. By recording identification data such as the SKU MKali.672.1 and the GTIN 4061905050565, the certificate creates an auditable trail that simplifies conformity checks and internal traceability schemes. This clarity reduces uncertainty in acceptance procedures and helps maintain consistent measurement quality across batches. Strengthening quality control and audit readiness Maintaining a documented calibration record supports rational quality decisions: it provides evidence for inspections, helps demonstrate consistency in measurement processes and supports non-conformance investigations where required. The certificate is suited for organisations that prioritise consistent tolerances and documented proof during supplier assessments or internal audits. The practical outcome is a smoother verification workflow and fewer repeated measurements, which improves throughput and reduces downtime. What the record represents for shop-floor practice The document confirms that a specific set of measurement pins was subject to verification and that a corresponding record exists for future reference. For workshops and inspection labs this means easier integration of calibrated tools into measurement routines and clearer documentation for quality files. Identification values such as MKali.672.1 and the ECLASS code 25149002 help classify the record within inventory and asset-management systems, making administrative handling straightforward and reliable. Practical benefit: reliability without complication Using an official calibration record conserves operational focus: measurement tools can be assigned, tracked and used with documented confidence, which supports efficient planning and repeatable results. Metav’s role as a precision partner further ensures that documentation is delivered with market-appropriate standards, helping purchasing and quality teams to centralise compliance activities and reduce the number of suppliers to manage. Request the calibration certificate via Metav Werkzeuge for traceable measurement assurance and concise documentation — Metav Werkzeuge can advise on suitability for specific gauge pin sets and system integration Technical Data Article number: MKali.672.1 GTIN: 4061905050565 ECLASS: 25149002 Name: Calibration certificate (gauge pin set) Category: Calibration of measuring tools Key numbers Weight: 0 kg UID: MKali.672.1 Scope and features Calibration certificate for gauge pin set Intended for calibration and documentation of measuring tools Category path: Calibration of measuring tools FAQ What does the calibration certificate confirm? The calibration certificate confirms that a gauge pin set has a recorded verification event; the document named MKali.672.1 serves as the official record for traceability and classification. Is the certificate suitable for audit documentation? Yes, the calibration certificate MKali.672.1 is intended to be used as part of audit files and quality records for measuring tools and gauge pin sets. Which identification numbers appear on the certificate? The certificate includes identifiers such as the SKU MKali.672.1 and GTIN 4061905050565 for clear inventory and traceability reference. Can the certificate be linked to an asset-management system? The calibration certificate is structured for straightforward incorporation into asset and document-management systems using the provided SKU and GTIN information. Does the certificate cover a scope of measuring tools beyond gauge pins? The product listed is specifically a calibration certificate for a gauge pin set; further documentation for other measuring tools can be provided separately if required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Calibration Certificate For Gauge Pin Set - Metav IndustryLine
Benefit from a calibration certificate that documents measurement validity and supports quality assurance in the workshop. Combine clear traceability, formal documentation and Metav IndustryLine’s processing to keep inspection records complete — order the calibration certificate directly via Metav Werkzeuge or consult our specialists for tailored arrangements. Calibration certificate — Traceable documentation for measuring tools (Metav IndustryLine) A Calibration certificate that records the verified status of measuring tools used in workshop, inspection and quality-assurance environments Traceable calibration documentation Suitable for workshop measuring tools Issued by Metav IndustryLine Built for reliable measurement and quality assurance A formal calibration document creates a reproducible basis for decisions in production and inspection. The calibration certificate records the validation of a measuring device, supplying a dated statement of conformity that supports quality systems and audit trails. For workshop and inspection use, this document reduces uncertainty about instrument condition and helps avoid production errors caused by unchecked tools. Practical benefits for day-to-day inspection and compliance Keeping a current calibration record simplifies traceability and retention of measurement data within quality documentation. The certificate functions as verifiable evidence during audits and incoming inspection procedures, enabling easier acceptance of instruments in internal quality checks. The clear documentation also supports maintenance planning by signalling when a follow-up calibration should be scheduled. How ordering and documentation are handled Processing results in an official calibration document linked to the article reference and GTIN, suitable for archiving with other metrology records. The service is tailored to calibration tasks within the metrology category, providing a formal output that can be filed with inspection dossiers. Metav IndustryLine handles the administrative steps so workshops and quality departments receive a ready-to-store certificate. Secure formal calibration through Metav IndustryLine — arrange certification via Metav Werkzeuge in Emmerich for traceable documentation and assured measurement validity: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: MKali.670.1 GTIN: 4061905049989 eClass: 25149002 UID: MKali.670.1 Brand: Metav IndustryLine Facts Weight: 0 kg Special features Calibration certificate for measuring tools Category: Calibration of measuring tools Story trigger: kalibrieren FAQ What does the calibration certificate cover? The calibration certificate documents the verified condition of the measuring tool and provides an official record for quality control and audit purposes; refer to the Calibration certificate issued by Metav IndustryLine (SKU MKali.670.1) for details. How is the certificate used in quality systems? The certificate serves as verifiable evidence of measurement validity, suitable for filing with inspection reports and maintenance records to support quality-assurance workflows. Is the certificate specific to a device type? The document is issued for the calibrated measuring item within the calibration category; details on the calibrated item are recorded on the Calibration certificate from Metav IndustryLine. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Calibration Certificate for Gauge Pin Set - Metav IndustryLine
Take advantage of a fully documented, traceable calibration record and clear reference identifiers to maintain quality control and conformity across production. Benefit from certified measurement results and fast processing — request the calibration certificate directly via Metav Werkzeuge or consult our specialists for advice. Calibration certificate — traceable record for measurement tools A calibration certificate providing a documented confirmation of measurement results and applicability for workshop or laboratory measuring equipment. Traceable calibration record included Documented measurement results Reference SKU MKali.671.1 for tracking Improve audit readiness with documented traceability A formal calibration certificate creates a verifiable chain from measurement result to recognised reference standards, supporting internal quality control and external audits. The recorded values and measurement conditions reduce uncertainty in inspection routines and help maintain process reliability. Where traceability and documentation are required for compliance, the certificate serves as the official proof that measuring instruments have been assessed and recorded under controlled conditions. Reduce production risk by integrating calibrated data Using a documented calibration record simplifies acceptance criteria and helps prevent rework or rejected parts caused by uncertain measurements. The certificate supplies measured values and contextual information that can be entered into quality-management systems, allowing measurable improvements in repeatability and inspection throughput. This rational benefit supports decision-making in production planning and ensures that measurement-based tolerances remain dependable over time. Clear identifiers and reference information for systematic management Every certificate contains reference data that enables easy filing and retrieval: a unique reference number, the product SKU MKali.671.1 and a GTIN for inventory tracking, plus the category of service. These identifiers make the calibration record straightforward to link with the corresponding measuring tool in digital records or paper files, reducing administrative effort when documenting compliance or preparing inspection reports. Practical handling and quality assurance in daily workflows The calibration record is supplied as an official document intended for inclusion in maintenance or inspection dossiers. It supports routine checks and helps production teams maintain consistent measurement practices. For organisations aiming to consolidate suppliers and streamline metrology procurement, the certificate complements Metav’s wider offering of measuring equipment and services, strengthening the overall quality chain without adding complexity. For reliable traceability and fast processing, request the Calibration certificate through Metav Werkzeuge — contact our consultants at the Emmerich office for detailed clarification and order handling Technical data Article number: MKali.671.1 GTIN: 4061905050541 ECLASS: 25149002 Core data Weight: 0 kg Special features Calibration service for measuring tools Documented measurement results included Category: Calibration of measuring tools FAQ What does the calibration certificate cover? The calibration certificate documents the measurement results and conditions for the inspected measuring item and provides an official record that the instrument was evaluated under controlled conditions. Is the calibration certificate traceable to a reference standard? Yes, the certificate provides traceability information and documented measurement values that link the inspection to recognised references for reliable quality assurance. How can the certificate be referenced in records? The certificate can be tracked using the reference SKU MKali.671.1 and the GTIN 4061905050541, which are included on the document for straightforward filing and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Calibration Certificate For Gauge Pin Set - Metav IndustryLine
Take advantage of a professionally issued calibration certificate that delivers documented traceability and clear measurement evidence, supporting quality control and audit readiness; order the certificate via Metav Werkzeuge or consult the specialists for individual calibration scheduling. Calibration Certificate – Traceable calibration for gauge pin sets, documented by Metav IndustryLine Calibration Certificate for gauge pin sets that records measurement results and provides formal documentation for quality assurance and inspection processes Traceable calibration certificate included Suitable for gauge pin sets and dimensional checks Rapid processing and documented results Confidence through documented traceability and compliance A professionally issued calibration certificate supplies the necessary evidence that a measuring tool has been checked under controlled conditions. For quality managers and workshop supervisors this means traceability of results back to calibration standards, reducing uncertainty during acceptance checks and internal audits. The documented measurement values support consistent decision-making and can be archived as part of the quality management system, giving clear, verifiable proof of the tool’s condition at the time of calibration. Practical benefits for inspection and production control The certificate simplifies integration into inspection routines by providing a concise record of measured values and tolerances. When paired with a gauge pin set, the documentation helps maintain reproducible reference measurements and shortens approval cycles for incoming or in‑process inspection. The outcome is improved throughput and fewer production interruptions, since measured deviations are identified and addressed proactively rather than discovered too late in the process. A reliable calibration pathway from Metav IndustryLine Issued under Metav IndustryLine’s quality procedures, the calibration process combines operational efficiency with the company’s role as a European quality filter. The service streamlines paperwork and returns clear, standardised documentation suitable for audits and supplier validation. This approach aligns with Metav’s commitment to democratising precision: accessible, dependable calibration that integrates with existing workshop workflows and reduces administrative overhead. Arrange calibration and documentation through Metav Werkzeuge to secure validated measurement evidence—contact the Metav specialists in Emmerich to schedule calibration or discuss specific documentation needs Technical data Article number: MKali.674 GTIN: 4061905050589 ECLASS: 25149002 Core data UID: MKali.674 Weight: 0 kg Special features Includes calibration certificate for gauge pin sets Documented measurement results for quality assurance Intended for calibration of measuring tools Processed by Metav IndustryLine FAQ What does the calibration certificate document? The certificate records the measured values and test conditions for the calibrated item and provides traceable documentation confirming the measurement results for the gauge pin set. Is the calibration traceable and suitable for audits? Yes, the calibration certificate issued by Metav IndustryLine provides traceable measurement evidence that can be used during internal and external audits. Which item is covered by the certificate? The calibration certificate covers the checked gauge pin set and documents the measured dimensions and results under the calibration procedure (SKU MKali.674). How should the certificate be archived within a quality system? The certificate should be stored alongside other calibration records to demonstrate compliance and to support periodic review of measuring equipment status. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Calibration Certificate For Gauge Pin Set - Metav IndustryLine
Take advantage of traceable calibration and documented measurement data to strengthen inspection routines and reduce measurement uncertainty; the certificate includes clear identification and delivery from Metav Werkzeuge for reliable evidence in quality processes. Calibration Certificate – Traceable measurement report and documented evidence (Metav IndustryLine) A Calibration Certificate that provides documented measurement results and traceable evidence for inspection, quality control and production records. Traceable measurement report Documented calibration data Identification: MKali.670 Ensure traceable accuracy for inspection and compliance A professional calibration certificate documents the measured values and the conditions under which they were taken, creating a verifiable link to recognised standards. This traceable documentation reduces measurement uncertainty and supports repeatable inspection routines in workshops and production lines. By formalising measurement results, the certificate becomes a practical tool for conformity assessments and internal quality checks. Clear measurement data that supports production decisions The calibration report provides structured results that can be integrated into existing quality records and audit trails. Measured values are presented alongside contextual information so that acceptance decisions and process adjustments are based on documented evidence rather than estimates. For purchasing and inspection departments, this certifies the suitability of measuring equipment for routine control tasks and aids in maintaining consistent product quality. Seamless integration with quality management and audit readiness A single, well‑documented calibration entry simplifies traceability during audits and reduces administrative overhead for quality managers. Metav IndustryLine acts as a quality filter for the European market, combining practical workshop supply with reliable metrological documentation. The supplied certificate supports transparent record keeping and helps maintain supplier confidence across the supply chain. For certified measurement documentation from Metav IndustryLine, request the Calibration Certificate MKali.670 via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for procurement and delivery details. Technical Data Article number: MKali.670 GTIN: 4061905048982 ECLASS: 25149002 Manufacturer: Metav IndustryLine Facts SKU: MKali.670 UID: MKali.670 Weight: 0 kg Special features Calibration certificate Delivered with calibration report Traceable measurement documentation FAQ What information does the calibration certificate contain? The certificate records the measured values, measurement conditions and traceability statement; the Calibration Certificate (Metav IndustryLine, MKali.670) serves as documented evidence for inspection and quality records. Is the calibration traceable to national or international standards? Yes; the Calibration Certificate issued by Metav IndustryLine declares the traceability of the measurement results and supports conformity checks in audit procedures. How is the certificate identified for record keeping? Each certificate is clearly identified — including the SKU MKali.670 and GTIN — so the calibration report can be linked unambiguously to the corresponding measuring item in management systems. Can the certificate be used in internal and external audits? The Calibration Certificate (MKali.670) is formatted to support audit requirements by providing documented measurement data and traceability information suitable for both internal quality control and external assessments. What benefits does this certificate bring to workshop operations? The certificate reduces measurement uncertainty in routine controls, streamlines documentation, and supports decision making in production by supplying verified measurement data from Metav IndustryLine. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Calibration Certificate for Gauge Pin Set, ISO 17025 Accredited - Metav IndustryLine
Take advantage of a formal calibration document that secures measurement records and supports quality procedures; the certificate supplies precise verification of calibration results and clear identification for audit purposes. Order the calibration certificate directly via Metav Werkzeuge or consult our specialists for tailored calibration advice. Calibration certificate — formal measurement documentation by Metav IndustryLine Calibration certificate for measuring instruments, intended to document calibration outcomes and support quality assurance and traceability within workshop and laboratory procedures Formal calibration documentation Suitable for measuring instruments Issued by Metav IndustryLine Formal evidence for quality management and audits A calibration certificate provides a formal record of measured values and the outcome of the calibration process, making it a practical tool for quality management and audit trails. The document summarises measured results in a structured way and supports the verification of instrument status before release for production or inspection tasks. By supplying a formal certificate, the service reduces ambiguity in measurement records and helps maintain consistent documentation standards across processes. Easy integration into existing inspection routines The certificate is designed for straightforward filing alongside inspection logs and test protocols, enabling rapid incorporation into existing quality workflows. As a document-focused deliverable, it complements equipment inventories and inspection schedules without needing additional hardware. This simplicity speeds up administrative handling and reduces the time between calibration and reuse of the instrument, supporting uninterrupted production and reliable inspection outcomes. Practical benefits for workshops, labs and procurement Technical teams, quality managers and procurement specialists benefit from clear calibration documentation when demonstrating compliance or planning maintenance cycles. The certificate clarifies the calibrated status of measuring equipment and supports decision-making for equipment rotation and re‑calibration intervals. Metav IndustryLine's position as manufacturer ensures the document originates from an established supplier, reinforcing confidence in the provenance of the calibration record. For formal measurement documentation from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for a tailored calibration certificate and specialist consultation: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: MKali.675 GTIN: 4061905050596 ECLASS: 25149002 Manufacturer: Metav IndustryLine Core data Category: Calibration of measuring tools SKU: MKali.675 Weight: 0 kg Special features Formal calibration certificate Delivery: Document only Intended use: Measurement tool documentation FAQ What does the calibration certificate confirm? The calibration certificate confirms the documented outcome of a calibration procedure performed for measuring instruments; the Calibration certificate from Metav IndustryLine (SKU MKali.675) provides formal documentation for records and audits. Is the calibration certificate suitable for quality audits? Yes, the certificate is intended to serve as documentary evidence for internal and external audits and to support quality management procedures. How is the certificate delivered? The calibration certificate is provided as a formal document accompanying the calibration service; it is issued under the Metav IndustryLine designation and referenced by SKU MKali.675. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com