Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
9.73mm Gauge Pin Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of sub‑micrometre accuracy, compact workshop design and protected delivery for reliable end‑dimension checks; order the part directly via Metav Werkzeuge or consult our specialists for application advice. Test pin M323.973 — workshop test pin, Ø 9.73 mm, ±0.001 mm (Metav IndustryLine) A test pin M323.973 designed for precise verification of end dimensions and inspection fixtures in workshop and production settings. Workshop-grade design, robust finish Diameter 9.73 mm with ±0.001 mm accuracy 50 mm length for deep gauge checks Supplied in transport box for protection Exceptional accuracy for end‑dimension verification The M323.973 delivers a diameter of 9.73 mm with a measuring tolerance of ±0.001 mm, making it suitable where reproducible reference dimensions are required. This level of precision reduces measurement uncertainty when checking end‑masses or plug gauges and supports quality assurance processes that demand tight tolerances. The compact geometry and narrow tolerance band mean fewer rejections and a clearer pass/fail decision in go/no‑go or comparator fixtures, translating directly into more efficient inspection cycles and reduced scrap rates. Built for everyday workshop handling Constructed in special steel, the item is optimised for routine use in industrial environments; the workshop version balances hardness and toughness so the pin resists deformation while remaining serviceable in typical toolroom conditions. The 50 mm overall length provides access to recessed features and enables use in a range of fixture depths without compromising stiffness. Supplied in a transport box to prevent transit damage, the product arrives protected and ready to be integrated into inspection sets or measurement benches. Practical integration and traceable inventory control The compact test pin suits both manual gauges and automated checking stations thanks to its standard dimensions and conservative mass (approx. 0.033 kg), which eases handling and fixture mounting. Incorporation into inventory and traceability systems is straightforward: the clear SKU and GTIN enable unambiguous identification for procurement and calibration records. Where serial checks or replacement parts are scheduled, the consistent geometry ensures interchangeability across batches, supporting uninterrupted production and predictable maintenance windows. For reliable workshop gauging and assured dimensional control, contact Metav Werkzeuge to discuss application matching and procurement of the Metav IndustryLine M323.973 test pin — local expertise and fast supply from Emmerich are available to support seamless integration. Technical Data Article number: M323.973 GTIN: 4061905063329 ECLASS: 21170231 Facts Diameter: 9.73 mm Length: 50 mm Accuracy: ±0.001 mm Weight: 0.033 kg Special features Material: Special steel Workshop version Supplied in transport box FAQ What tolerance does the test pin offer? The M323.973 test pin provides an accuracy of ±0.001 mm, suitable for tight end‑dimension verification and precision inspection tasks. What are the main dimensions for fixture planning? The pin measures 9.73 mm in diameter with a 50 mm overall length; mass is approximately 0.033 kg for handling and fixture mounting calculations. Is the test pin delivered protected for transport? Yes, the product is supplied in a transport box to protect the item in transit and during storage. Can the pin be used in comparator or plug‑gauge set‑ups? The consistent geometry and high tolerance make the M323.973 suitable for comparator checks and as a nominal reference in plug‑gauge arrangements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.74mm Gauge Pin, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Combine workshop robustness with ±0.001 mm repeatability and a resistant special steel construction to keep end‑measure checks reliable and traceable. Procure the gauge pin directly via Metav Werkzeuge or consult the Metav specialists for application support and supply options. Gauge pin M323.974 – 9.74 mm, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) The gauge pin M323.974 is a single precision test pin designed for end‑measurement verification and fine gauging tasks in workshop metrology. Precision tolerance ±0.001 mm Diameter 9.74 mm for end‑measure checks 50 mm test length for fixture compatibility Workshop‑grade special steel construction Accurate control with minimal uncertainty The M323.974 gauge pin delivers a ±0.001 mm tolerance, providing a level of precision that supports strict dimensional control and reduces the likelihood of part rejection. Such a fine tolerance is particularly valuable when verifying end measures or mating fits where even micrometre deviations affect assembly quality. The compact design and exact diameter make it straightforward to use in go/no‑go fixtures, inspection benches or comparison against datum surfaces, leading to more consistent quality reporting and fewer downstream corrections. Durable build tailored to workshop conditions Constructed from special steel and specified as a workshop edition, this test pin is engineered for the demands of everyday use. The 50 mm length balances reach and stiffness, aiding stable handling and repeatable seating in holders or sockets. A robust material choice increases resistance to wear and maintains the critical diameter over many inspection cycles, which preserves measurement reliability and lowers the frequency of replacements. The combination of material and geometry therefore contributes to long‑term operational efficiency. Seamless integration into inspection routines Designed as a single test pin for end measurement, the component integrates easily with common pin holders, check fixtures and bench tooling. Its compact weight and defined dimensions facilitate quick interchangeability and simple storage when used as part of a set of reference pins. Backed by Metav’s distribution and product range, the pin supports streamlined procurement and consistent supply for production and quality departments, enabling sustained traceability and dependable inspection workflow continuity. For workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge for purchasing and technical advice on the M323.974 gauge pin. Technical Data Article number: M323.974 GTIN: 4061905063336 Manufacturer: Metav IndustryLine Facts Diameter: 9.74 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.033 kg Special features Material: Special steel Workshop edition Single test pin for end measurement Accuracy class: ±0.001 FAQ What applications is this gauge pin suited for? The gauge pin M323.974 is intended for end‑measure verification and fine gauging tasks in workshop metrology, where a precise 9.74 mm reference is required. Can the pin be used in standard pin holders and fixtures? Yes, the 50 mm length and defined diameter make the M323.974 compatible with common pin holders and bench fixtures used for dimensional checks. How does the ±0.001 mm tolerance affect measurement processes? Such a tight tolerance reduces measurement uncertainty and improves the reliability of go/no‑go decisions and fit inspections when using the M323.974 as a reference. Is the material suitable for regular workshop use? The special steel construction of this test pin is selected for wear resistance and durability under routine inspection cycles. Which product identifier should be used when ordering or referencing this item? Refer to the article number M323.974 or GTIN 4061905063336 when ordering or specifying the gauge pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.75mm Test Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of workshop-grade construction, a tight ±0.001 mm tolerance and a compact 50 mm length for reliable end-dimension checks and assembly control — order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single — 9.75 mm, ±0.001 mm (50 mm length) — Metav IndustryLine The gauge pin, single is a workshop-grade precision pin for end‑dimension verification and fit testing in production and inspection routines Workshop-grade precision Diameter 9.75 mm, tolerance ±0.001 mm 50 mm length in special steel Supplied in transport case Precision where measurement decisions become reliable A diameter of 9.75 mm combined with a geometric tolerance of ±0.001 mm (equivalent to 1 µm) delivers the dimensional certainty required for tight-fit checks and final acceptance tests. The compact design reduces the influence of bending and operator variation, giving consistent contact geometry for repeatable pass/fail assessments. This level of control shortens inspection times and reduces downstream rework by providing a clear, verifiable reference for go/no‑go decisions. Built for robust handling in workshop environments The workshop‑oriented construction and special steel composition balance wear resistance with manageable mass for manual handling. At 50 mm length the pin remains easy to position in blind bores and on flat reference surfaces while maintaining stability during tactile checks. Supplied in a transport case, the single unit is protected in transit and storage, ensuring the measuring surface stays free from nicks that would compromise accuracy. Practical use and integration into quality workflows The pin is suited for end‑dimension and assembly inspection, bench checks and fixture validation where a precise cylindrical reference is needed. As a single test component it supports quick interchangeability in gauge sets and can be combined with plug gauges or ring gauges for multi‑point verification strategies. Clear labelling and the included GTIN facilitate traceability within inventory and quality documentation systems, simplifying audits and part‑control procedures. For workshop precision choose the Metav IndustryLine gauge pin for reliable ±0.001 mm accuracy — contact Metav Werkzeuge in Emmerich for technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M323.975 GTIN: 4061905063343 Manufacturer: Metav IndustryLine Label: Prüfstift, einzeln, 9,75mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 9.75 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.033 kg eCl@ss: 21170231 Special features Workshop version Material: special steel Supplied in transport case Single test pin for end‑dimension checks FAQ What level of precision does the pin provide? The M323.975 gauge pin offers a dimensional tolerance of ±0.001 mm, equivalent to 1 µm, suitable for fine acceptance checks and tight fit controls. Which material is used for the pin? The pin is manufactured from special steel, selected to provide a balance of surface hardness and resistance to wear for repeated inspection cycles. What applications suit this test pin? Typical uses include end‑dimension verification, go/no‑go fit testing, fixture validation and quick bench checks where a precise cylindrical reference is required. Is the pin supplied ready for storage and transport? Yes; the pin is supplied in a transport case to protect the measurement surface during storage and transit. How does this pin support quality workflows? By delivering a repeatable reference diameter with a 1 µm tolerance, the pin reduces ambiguity in acceptance testing and helps streamline inspection documentation and inventory traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.76mm Precision Gauge Pin ±0.001mm Length 50mm, Workshop Finish - Metav IndustryLine
Take advantage of precise end-measurement performance and robust workshop design: the combination of ±0.001 mm tolerance and a compact 50 mm length ensures repeatable fits and quick inspection cycles. Order the gauge pin directly via Metav Werkzeuge or consult the specialists for application advice. Gauge pin M323.976 — single gauge pin, 9.76 mm diameter, ±0.001 mm tolerance Gauge pin M323.976 is a single-ended, high-precision gauge pin intended for accurate end measurements and plug-fit checks in production and inspection environments. Workshop version, robust finish Diameter 9.76 mm for tight fits Tolerance ±0.001 mm for ultra-precision Length 50 mm for compact handling Precision that guarantees interchangeability The core advantage of this component is its ±0.001 mm tolerance, which makes it suitable where repeatable fits and minimal clearance are required. Manufactured from special steel, the pin provides consistent hardness and surface integrity that support stable contact during measurement or assembly. When used as an end-measure gauge or as a reference plug, the controlled diameter of 9.76 mm reduces variation between production lots and allows straightforward interchangeability between mating parts. This accuracy shortens inspection loops and contributes to predictable assembly outcomes. Designed for workshop routines and reliable handling With a 50 mm length the pin combines compactness with practical handling for bench work and fixture setups. The workshop version finish resists ordinary handling wear and eases insertion into bores and gauges without unnecessary burr generation. Its single-piece construction minimises variables that could affect concentricity, and the modest mass helps to avoid undue influence on delicate assemblies. The result is a tool that integrates into everyday quality-control cycles, allowing faster checks while preserving the fine tolerances demanded in precision manufacturing. Practical applications and process benefits This gauge pin is well suited to end-measure tasks, plug-go/no-go verification and calibration jigs used in production and laboratory settings. By using a measured reference such as this pin, measurement uncertainty is reduced and throughput is improved through quicker decision-making at inspection points. The design supports clean handling and straightforward identification in a tool set, and the supplied GTIN aids traceability in inventory and quality records. For suppliers and workshops aiming to raise reproducibility, the pin serves as a compact, high-accuracy solution that complements standard metrology equipment. Choose the Metav IndustryLine gauge pin M323.976 for traceable end measurements and contact Metav Werkzeuge in Emmerich for tailored advice and order support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.976 GTIN: 4061905063350 Label: Prüfstift, einzeln, 9,76mm, +/- 0.001 mm Länge 50 mm Material: Special steel Weight: 0.033 kg Length: 50 mm Diameter: 9.76 mm Tolerance: ±0.001 mm Facts Length: 50 mm Diameter: 9.76 mm Weight: 0.033 kg Tolerance: ±0.001 mm SKU: M323.976 GTIN: 4061905063350 Special features Workshop version Single gauge pin for end measurements Compact handling for bench and jig use Application focus: end measurements FAQ What tolerance is offered by this gauge pin? The gauge pin M323.976 is manufactured to a tolerance of ±0.001 mm, guaranteeing high-precision end measurements. Which material is used for the pin? The pin is made from special steel, chosen for dimensional stability and surface quality suitable for metrology use. What applications suit this gauge pin? Typical uses include plug-fit checks, end measurements and reference gauges within inspection jigs or assembly fixtures. How is the pin identified for inventory and traceability? Identification is supported by the SKU M323.976 and GTIN 4061905063350 for stock control and quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.77mm Gauge Pin, Workshop Version, ±0.001 mm Tolerance, 50mm Length - Metav IndustryLine
High-precision inspection becomes straightforward with the compact combination of ±0.001 mm tolerance and a special steel body; the short 50 mm length is optimised for end-measure references and repeatable checks. Order the gauge pin directly via Metav Werkzeuge or consult our team for application advice. Gauge pin M323.977 – precision 9.77 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A gauge pin designed as a workshop-grade reference pin for end-measure checks and tight-tolerance inspection tasks Workshop version, robust construction Diameter 9.77 mm with ±0.001 mm accuracy Length 50 mm for end-measure reference Supplied in a transport case Ensure reproducible inspection with sub-micron repeatability The core advantage of this reference pin is its tolerance of ±0.001 mm, which delivers repeatable results where small deviations matter. In inspection routines and verification jigs, a stable reference reduces measurement scatter and accelerates decision-making during batch acceptance. The 9.77 mm diameter is manufactured to tight limits, allowing it to function as a definitive gauge for go/no-go checks and comparative assessments. By replacing uncertain references with a calibrated plug, throughput and first-pass yield are improved without adding procedural complexity. Durable workshop design for everyday use Manufactured from special steel, the component combines wear resistance with dimensional stability under repeated handling. The workshop-grade finish resists knocks and surface damage that can otherwise compromise a reference pin, so service life is extended and recalibration intervals are minimised. The short 50 mm overall length keeps the pin stiff and easy to seat in fixtures, which aids reliable contact geometry and reduces operator-induced variability. Supplied as a single piece, the item is ready for immediate integration into inspection sets. Designed for practical handling and traceability Compact mass and straightforward geometry make the reference pin easy to insert, remove and store between uses; its modest weight contributes to simple handling during rapid checks. Delivery in a transport case protects the reference surface from contamination and mechanical damage, helping to preserve calibration integrity. The combination of clear nominal diameter and minimal thermal mass also reduces warm-up effects during short measurement cycles, so comparative measurements remain consistent across shifts. Reliability that supports shop-floor quality systems As part of the Metav IndustryLine range, this reference pin is supplied with manufacturing controls and traceable identification suitable for systematic quality assurance. Using a dedicated gauge for end-measure verification reduces the need for repeated adjustments and helps maintain process stability. The straightforward geometry eases integration into existing fixtures and makes the pin a practical choice where fast, frequent spot checks are required. Metav’s logistics and product range support continuous availability for production and service environments. For demanding end-measure checks, request the Metav IndustryLine gauge pin M323.977 from Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com for order and delivery options Technical data Article number: M323.977 GTIN: 4061905063367 Eclass: 21170231 Facts Diameter: 9.77 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.033 kg Special features Workshop version Material: special steel Supplied in transport case Single-piece delivery FAQ What level of accuracy can be expected from this reference pin? The M323.977 gauge pin is produced to a tolerance of ±0.001 mm, making it suitable for high-precision spot checks and comparative inspection where micrometre-level consistency is required. Is the pin suitable for workshop use and repeated handling? Yes, the workshop-grade finish and special steel construction ensure robustness for everyday use; the supplied transport case reduces risk of damage during storage and transit. Can this pin be used as an end-measure reference in fixtures? The short 50 mm length and stiff geometry make the pin ideal for end-measure references and incorporation into jigs and gauges for repetitive checks. Does the product come with a calibration certificate? No specific calibration certificate is supplied by default in the product data; for traceable calibration options and certificates, please contact Metav Werkzeuge to arrange the appropriate service. What is the recommended application for a 9.77 mm diameter reference pin? A diameter of 9.77 mm is typically used for go/no-go checks, end-measure references and verification tasks in mechanical assembly and inspection routines where that nominal size is relevant. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.78mm Gauge Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of extreme dimensional accuracy (±0.001 mm), a compact Ø 9.78 mm profile and a 50 mm working length for dependable inspection results in busy workshops; order the item directly via Metav Werkzeuge or consult the team for specification support. Gauge pin, single — Ø 9.78 mm, ±0.001 mm (50 mm length) — Metav IndustryLine The gauge pin, single is a hardened inspection pin intended for precise end‑measure verification and routine dimensional checks in workshop and quality‑control environments. High-precision tolerance ±0.001 mm Diameter Ø 9.78 mm in workshop design Hardened special steel construction Compact 50 mm length for confined spaces Reliable dimensional control for routine inspection The compact inspection pin delivers repeatable checks thanks to its ±0.001 mm tolerance, providing a measurable advantage when verifying bore diameters, end‑measure fits or component seats. Manufactured from special steel, the pin resists wear and preserves form over many cycles, so measured deviations more likely reflect the inspected part rather than the measuring aid. Identifying deviations early reduces rework and supports stable production yields. Built for workshop durability and repeatability The workshop version construction balances rigidity and handling: a short 50 mm shank minimises bending, while the hardened surface ensures long service life under frequent seating and withdrawal. This design suits busy inspection benches and fixture use, where robustness and predictable behaviour are essential for reliable sampling and go/no‑go checks. Practical handling and integration in inspection workflows Marked with the clear identifier M323.978, the single pin is easy to catalogue and integrate into gauge sets, inspection trays or portable check kits. Its compact dimensions make it suitable for confined spaces and quick visual comparison tasks, while the precise diameter 9.78 mm simplifies transfer measurements and end‑limit verification. The small mass supports safe, single‑hand operation without compromising dimensional stability. For workshop-ready, traceable inspection tools choose the Metav IndustryLine gauge pin M323.978 — contact Metav Werkzeuge in Emmerich for personalised technical advice and reliable supply Technical data Article number: M323.978 GTIN: 4061905063374 Brand: Metav IndustryLine Category: Gauge pins Numbers / Core technical data Diameter: 9.78 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.033 kg ECLASS: 21170231 Special features Workshop version Material: special steel Single gauge pin Label: Prüfstift, einzeln, 9,78mm, +/- 0.001 mm Länge 50 mm FAQ What dimensional tolerance does this inspection pin provide? The inspection pin M323.978 offers a tolerance of ±0.001 mm, suitable for high‑precision verification tasks. Which material is used for the pin and why does it matter? The pin is made from special steel, chosen to maintain form and resist wear during repeated seating and withdrawal. For which applications is this gauge pin best suited? This Metav IndustryLine single pin is designed for end‑measure verification, bore checks and compact fixture inspection tasks in workshop environments. How is the item identified for inventory and ordering? The product is listed under article number M323.978 and GTIN 4061905063374 for straightforward ordering and cataloguing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.79mm Gauge Pin, Single, ±0.001mm Accuracy, Length 50mm, Workshop Version, Plastic Case - Metav IndustryLine
Take advantage of exact end‑measure verification with a 9.79 mm diameter and a guaranteed ±0.001 mm tolerance; the workshop‑grade construction and special steel ensure repeatable checks and durable service life. Order this verification component directly via Metav Werkzeuge or ask the consultants for application advice. Test pin M323.979 – 9.79 mm, ±0.001 mm (Metav IndustryLine) A test pin M323.979 designed for precise end‑measure checks and reference gauging in workshop and inspection environments 9.79 mm diameter, ±0.001 mm tolerance Workshop version, durable construction Special steel for stable dimensional integrity Length 50 mm, compact precision component Reliable high‑resolution inspection for critical fits The test pin provides a nominal diameter of 9.79 mm with a rated tolerance of ±0.001 mm (±1 µm), enabling dependable dimensional confirmation for components with tight fits. Such a fine tolerance allows clear distinction between within‑spec and out‑of‑tolerance parts, reducing ambiguity during routine production checks. Stated accuracy supports reproducible gauging results and helps maintain process control where small deviations can have a major impact on assembly performance. Built for daily workshop demands Constructed as a workshop version from special steel, the pin balances wear resistance with precise geometry. At 50 mm overall length and a mass of 0.033 kg, the shape is optimised for short reference measurements and repeated handling on the shopfloor. The compact design reduces bending influence during insertion into fixtures, which keeps measured values consistent and prolongs usable service life under typical workshop conditions—benefits that translate into fewer rechecks and less downtime. Practical integration and procurement traceability This verification component integrates readily with standard gauge blocks, fixture nests and comparator setups, functioning as a reliable reference for end‑measure verification. Identification via SKU M323.979 and GTIN 4061905064203 simplifies inventory control and ordering workflows. As part of the Metav IndustryLine range, the item is supported by a broad metrology supply network that prioritises availability and traceability, helping to keep inspection benches operational and procurement transparent. For a workshop‑grade reference that combines micrometric accuracy with robust construction, order the Metav IndustryLine M323.979 test pin through Metav Werkzeuge in Emmerich or contact our consultants for tailored application support Technical data Article number: M323.979 Product: Test pin, single, 9.79 mm, ±0.001 mm, length 50 mm Manufacturer: Metav IndustryLine GTIN: 4061905064203 Key figures Diameter: 9.79 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.033 kg eClass: 21170231 Special features Workshop execution Material: Special steel Category: Gauge pins Accuracy indication: ±0.001 mm FAQ What tolerance does this test pin provide? The test pin M323.979 is specified at ±0.001 mm (±1 µm), making it suitable for fine tolerance inspection tasks. Which material is used for the component? The pin is made from special steel, selected to retain dimensional stability under repeated use. For which applications is this item intended? It is intended for end‑measure checks, fixture references and short‑range verification tasks in workshop and inspection environments. How can the part be identified for ordering and stock control? Use SKU M323.979 and GTIN 4061905064203 for procurement, inventory and traceability processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.7mm Gauge Pin Single, ±0.001mm Tolerance, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of proven workshop robustness and the high repeatability that comes with a tight tolerance and compact form factor — the 9.70 mm diameter, ±0.001 mm accuracy and 50 mm length deliver reliable reference values for end‑measure inspections; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.970 — single test pin, 9.70 mm, ±0.001 mm (Metav IndustryLine) A gauge pin for precise end‑measure checks and alignment tasks in workshop metrology, engineered as a compact, workshop‑grade test instrument. High precision ±0.001 mm Diameter 9.70 mm nominal 50 mm length, workshop version Supplied in transport box for safe delivery Precision that secures measurement results The design focuses on dimensional certainty: a firm nominal diameter of 9.70 mm with an advertised accuracy of ±0.001 mm ensures that the pin serves as a dependable reference in pass/fail inspections and comparative checks. The tight tolerance reduces measurement scatter and supports faster decision making on the shop floor, as inspection results become reproducible without repeated set‑ups. For quality managers, the clear numerical specification simplifies process capability assessments and traceability documentation. Built for straightforward workshop use The workshop configuration combines a short, rigid form with special steel construction to withstand the knocks and handling of routine inspection work. The 50 mm usable length balances accessibility and stiffness, lowering the risk of bending during manual handling and making the pin ideal for quick insertion checks and fixture alignment. Supplied in a transport box, the instrument is protected during storage and transit, preserving the reference surface and prolonging service life — a practical advantage where reliability directly affects throughput. Integration into existing inspection routines Compact mass and minimal handling complexity make this test pin simple to incorporate into a variety of measurement setups, from tactile probes to quick gauge blocks and go/no‑go fixtures. The small overall weight supports easy positioning while the consistent contact geometry aids repeatable seating and tactile feedback during manual checks. Utilising a dedicated gauge pin like this reduces non‑value‑adding rework and speeds up quality gates without requiring complex calibration equipment. For precision bench checks choose the Metav IndustryLine gauge pin M323.970 — contact Metav Werkzeuge in Emmerich for detailed delivery options and tailored application advice. Technical data Article number: M323.970 GTIN: 4061905063299 Manufacturer: Metav IndustryLine Facts Nominal diameter: 9.70 mm Length: 50 mm Accuracy: ±0.001 mm Weight: 0.033 kg Special features Material: special steel Workshop execution Supplied in transport box for transport protection Category: Messstifte FAQ What accuracy does this gauge pin offer? The Metav IndustryLine gauge pin M323.970 is specified with an accuracy of ±0.001 mm and is intended for high‑precision end‑measure and reference checks. Is the pin suitable for routine workshop inspection use? Yes — the workshop execution and special steel construction make this gauge pin suitable for everyday inspection tasks and fixture checks in a production environment. How is the product delivered to protect the reference surface? Delivery of the M323.970 includes a transport box to protect the pin during shipping and storage and to help maintain the integrity of the measuring face. Can this test pin be used with tactile probes or fixture gauges? The compact geometry and firm nominal diameter make this gauge pin compatible with a range of tactile and fixture applications where a stable reference is required. What is the exact length and weight of the pin? The test pin has a usable length of 50 mm and a mass of approximately 0.033 kg, allowing easy manual handling without compromising stiffness. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.81mm Gauge Pin Single ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
Reliable end-measurement performance from a 9.81 mm gauge pin with ±0.001 mm tolerance and a 50 mm length, offering workshop-grade special steel construction and secure transport packaging. Benefit from reduced rework and consistent inspection results — order directly via Metav Werkzeuge or consult our specialists for application advice. M323.981 precision gauge pin — Ø 9.81 mm, ±0.001 mm, Metav IndustryLine The M323.981 is a precision gauge pin designed for end‑measurement and fit inspection tasks in workshop and toolroom metrology. Ultra-fine tolerance ±0.001 mm Diameter 9.81 mm for end measurements 50 mm overall length in workshop design Supplied in transport box for secure handling Accuracy that reduces rework and speeds inspection With a ±0.001 mm tolerance, this inspection pin delivers precision that moves quality control from guesswork to repeatable results. The extremely fine tolerance reduces the likelihood of false rejects and minimises corrective rework, improving first‑pass yield in batch verification and final inspection. For process planners and quality engineers this means more predictable measurement outcomes and a clear basis for go/no‑go decisions. Compact geometry for confined and precise checks The nominal diameter of 9.81 mm and a 50 mm overall length place this tool in the micro category for compact inspection work, making it ideal where access is limited and surface conformity must be verified. The compact geometry is especially suited to jigs, fixtures and small components in precision mechanics, where a slim profile and low mass permit safe probing without disturbing the part. The special steel construction combines dimensional stability with wear resistance for repeated use. Practical handling and workshop integration Engineered as a workshop design item, the pin is supplied ready for safe transport in a transport box, reducing damage risk during storage and transit. Low mass and straightforward geometry simplify fixturing and manual handling during routine checks. Delivered as an individual probe, the component integrates easily into inspection routines where precise end‑measurements are required and where consistent mechanical reference is essential for downstream assembly quality. For reliable end‑measurement tasks choose the Metav IndustryLine M323.981 precision gauge pin and contact Metav Werkzeuge in Emmerich for tailored supply and advice — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: M323.981 GTIN: 4061905064227 Manufacturer: Metav IndustryLine Facts Diameter: 9.81 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.033 kg Special features Material: Special steel Workshop design Supplied in transport box ECLASS: 21170231 Story trigger: endmasse Category: Gauge pins FAQ Is this gauge pin supplied with a calibration certificate? No calibration certificate is listed for the M323.981 in the product data What measurement tasks is the pin intended for? The M323.981 precision gauge pin is intended for end‑measurements and fit inspection in workshop metrology and fixture checking Which materials is the pin suitable for checking? The probe pin is a dimensional reference tool; material compatibility depends on the part under test rather than the pin itself How does the micro geometry help in practice? The compact Ø 9.81 mm profile and 50 mm length enable measurement in confined spaces and on small components where larger gauges would interfere Is the pin delivered individually or in sets? This item is offered as an individual gauge pin and is supplied in a transport box for protection Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.82mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of exceptional dimensional accuracy, robust workshop construction and straightforward inspection workflow integration; the precise ±0.001 mm tolerance on the 9.82 mm gauge pin supports reliable go/no‑go checks and reduces rework. Order directly via Metav Werkzeuge or consult the Metav team for delivery and technical advice. Gauge pin M323.982 — inspection pin, 9.82 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.982 is a workshop‑grade inspection pin for fast and repeatable end‑measure verification and hole checking in production and quality control environments. High precision ±0.001 mm Diameter precisely ground 9.82 mm Length 50 mm for stable handling Workshop execution and robust construction Faster, measurable inspection through tight tolerance A consistently tight tolerance of ±0.001 mm translates into measurable gains in quality assurance: fewer ambiguous readings, quicker decisions at inspection points and reduced downstream rework. The hardened, accurately ground 9.82 mm shaft presents a true reference for hole gauges and fixture checks; this reliability shortens cycle‑time per inspection and supports objective go/no‑go outcomes. The precise specification is particularly beneficial where repeatability matters, turning subjective checks into reproducible data points and improving overall process throughput. Built for everyday workshop use with durable materials Constructed from special steel, this inspection pin is designed to withstand regular handling and the minor impacts common in production areas. The 50 mm length provides a comfortable grip and stable insertion for tactile checks while keeping the profile compact enough for tight fixtures. The workshop execution reflects a balance between precision and robustness: surfaces are machined for repeatable contact, and the geometry minimises measurement variation from operator handling. These attributes make the item well suited to toolrooms, assembly jigs and first‑article inspections. Integrates into quality systems and reduces uncertainty As an inspection aid, the pin supports standardised inspection routines, helping to document conformity and prevent parts from proceeding with marginal tolerances. The compact, single‑piece design simplifies storage and traceability in routine checks. Backed by Metav’s emphasis on accessible precision and a wide product range, the pin fits into broader measurement strategies that aim at consistent parts quality and fewer unexpected rejects. The result is a tangible contribution to process reliability and customer confidence in delivered components. For repeatable inspection in workshop environments, request the Metav IndustryLine gauge pin from Metav Werkzeuge and liaise with our Emmerich team for delivery and technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.982 GTIN: 4061905064234 Label: Prüfstift, einzeln, 9,82mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 9.82 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.033 kg Special features Material: Special steel Version: Workshop execution Single inspection pin (individual) FAQ What tolerance does this inspection pin offer? The gauge pin M323.982 (Metav IndustryLine) is manufactured to a tolerance of ±0.001 mm, enabling precise go/no‑go and reference checks. Is the pin suitable for routine hole inspection in a production environment? Yes, the workshop‑grade design of the M323.982 inspection pin makes it suitable for routine hole and end‑measure verification in production and assembly settings. What material is used for the pin? The inspection pin is made from special steel, selected for wear resistance and dimensional stability in regular workshop use. How should the pin be incorporated into quality procedures? Use the M323.982 as a standard reference in inspection protocols to ensure repeatable checks and to reduce ambiguity in tolerance assessments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.83mm Gauge Pin ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of micrometric precision, robust workshop construction and convenient transport packaging to streamline end‑measurement checks and fixture set‑up. Order the gauge pin directly via Metav Werkzeuge or contact the consultants for application advice. Gauge pin M323.983 — 9.83 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.983 is a workshop‑grade test pin for precise end‑measurements and reference checks in fine mechanical and general engineering environments. Workshop-grade test pin Diameter precisely 9.83 mm ±0.001 mm Hardened special-steel construction Supplied in transport case Accuracy that reduces rework and speeds inspection This test pin delivers a tolerance of ±0.001 mm, a level of precision suitable for demanding end‑dimension verifications and tight tolerance assembly checks. Such a fine tolerance translates into reliable repeatability when used as a reference in go/no‑go operations, alignment tasks or comparative checks. By using a defined nominal diameter of 9.83 mm, measurement routines become more predictable, helping to reduce reject rates and minimise downstream rework. Robust design for everyday workshop use Constructed from special steel and finished for workshop durability, the pin is optimised for repeated handling and insertion into bores and fixtures. The 50 mm overall length gives a comfortable engagement depth for many clamping and locating situations while keeping the component easy to handle. A low mass of 0.033 kg reduces inertia during manual use and contributes to stable placement, which in turn supports consistent measurement outcomes and longer service life. Compact solution for micro‑scale tasks and fixtures Although compact in dimension, this test pin is suited to micro‑scale measurement scenarios and precision fixture alignment. Its size and tolerance make it particularly useful for small‑bore verification, gauge stacking and end‑mass references in tooling setups. Supplied in a transport case, the component remains protected between uses, enabling secure storage and safe transfer between workstations without risking surface damage that could affect accuracy. Practical benefits in quality workflows Integrating this workshop test pin into inspection benches or assembly jigs provides a simple, low‑complexity way to anchor repeatable checks. The durable material and precise machining mean less downtime for replacement or refurbishment, while the clear nominal dimension and specified tolerance simplify documentation and quality recording. Where traceable calibration is required, a controlled workflow with periodic calibration steps can be established using accredited services. For ordering and tailored application advice on the Metav IndustryLine gauge pin, contact Metav Werkzeuge for expert guidance by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav’s team will advise on integration into existing inspection routines Technical data Article number: M323.983 GTIN: 4061905064241 Manufacturer: Metav IndustryLine Facts Diameter: 9.83 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.033 kg Special features Workshop version Material: special steel Supplied in transport case Category: gauge pin (test pin) Story trigger: end‑measurement FAQ What is the intended use of this test pin? The test pin is intended for end‑measurement checks, alignment and reference tasks in precision engineering and workshop inspection processes. Is the diameter tolerance suitable for high‑precision checks? Yes, the ±0.001 mm tolerance of the M323.983 provides micrometric accuracy appropriate for demanding dimensional verifications. What material is used and how does that affect durability? Manufactured from special steel, the pin offers wear resistance and mechanical robustness for repeated insertion and fixture use. Does the product come with a calibration certificate? The product is supplied as a workshop‑grade test pin; a calibration certificate is not included unless explicitly specified at order. How is the gauge pin delivered to protect its surface? The pin is supplied in a transport case to protect the working surfaces during storage and transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.84mm Gauge Pin ±0.001mm Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑tight tolerance, compact form and durable construction for reliable go/no‑go checks and reference measurements. Order the gauge pin M323.984 directly via Metav Werkzeuge or consult our technical advisers for application-specific guidance. Gauge pin M323.984 — precision test pin, 9.84 mm ±0.001 mm, 50 mm length (Metav IndustryLine) Gauge pin M323.984 provides a reliable reference for dimensional inspection and end‑measure checks in workshop and quality environments. Precision diameter 9.84 mm ±0.001 mm Length 50 mm for secure seating Special steel for enhanced wear resistance Workshop version for robust everyday use Consistent measurement where tolerances matter A solid reference pin with a diameter of 9.84 mm and an exceptional positional tolerance of ±0.001 mm delivers a reproducible reference that reduces ambiguity in pass/fail decisions. The tight tolerance—equivalent to 1 µm—supports critical inspection tasks and lowers the risk of assembly rework. Specifying such a pin in fixture checks or plug‑gauge procedures streamlines inspection protocols and shortens throughput times without compromising traceability. Built to withstand routine workshop handling Constructed from special steel and supplied as a single, workshop‑grade test pin, the item combines corrosion‑resistant hardness with a ground surface finish that maintains form under repeated use. The 50 mm length provides stable seating in fixtures and leaves sufficient overhang for safe handling, while the compact profile minimises the chance of bending during insertion. The robust design preserves dimensional integrity over many cycles, supporting reliable daily inspection routines. Integrates with existing quality processes and tooling Designed as a pragmatic inspection aid, this precision pin slots easily into gauges, templates and fixture bores to verify final dimensions and end measures. Its simple geometry and defined tolerance make it suitable as a master reference for setting measuring instruments, performing go/no‑go checks or validating bore sizes on the shop floor. Traceable identification (SKU M323.984) eases inventory control and documentation in standard quality workflows. Contact Metav Werkzeuge for tailored technical advice and procurement of the Metav IndustryLine gauge pin M323.984 — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.984 GTIN: 4061905064630 Manufacturer: Metav IndustryLine Core specifications Diameter: 9.84 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.033 kg Materials & features Material: special steel Workshop version Single test pin Label: Prüfstift, einzeln FAQ What tolerance does the pin offer? The gauge pin M323.984 is specified to ±0.001 mm, providing a 1 µm level tolerance for high‑precision reference applications. How is the pin typically used in inspection? This test pin serves as a reference for go/no‑go checks, fixture setup and end‑measure validation; integration into templates and gauges is straightforward thanks to its standard geometry. Is the pin suitable for everyday workshop use? Yes; the workshop version and special steel construction make the pin resilient to routine handling while preserving dimensional stability. Can this pin be used as a master for instrument setting? Given its tight tolerance and ground finish, the pin is suitable as a setting master for measuring tools and plug‑gauge procedures. What identification helps with traceability? The product is listed as SKU M323.984 (GTIN 4061905064630), which supports inventory tracking and documentation in quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.85mm Gauge Pin Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of laboratory-grade tolerance and rugged workshop design to ensure reliable end‑dimension checks and faster inspection routines; order directly via Metav Werkzeuge or consult the Metav advisors for tailored measurement solutions. Gauge pin M323.985 — single test pin, 9.85 mm diameter, ±0.001 mm The gauge pin M323.985 is a single, high‑precision test pin intended for end‑dimension verification and reference measurements in workshop and quality‑control environments. Workshop-grade single gauge pin, 9.85 mm ±0.001 Hardened special-steel construction, 50 mm length Delivered in protective transport case Suitable for end-dimension checks and calibration Precision that reduces measurement uncertainty The core asset of this test pin is its ±0.001 mm dimensional tolerance, equivalent to 1 µm, which makes it suitable where sub-micron repeatability is required. In practical terms, the fine tolerance minimises measurement scatter during bore and plug checks, so inspection decisions rest on a stable reference rather than subjective feel. The controlled diameter of 9.85 mm provides a reliable datum for pass/fail determinations and comparative gauging in production and incoming‑goods inspection. Robust design for everyday workshop use Constructed from special steel and finished for workshop durability, the pin combines corrosion resistance with dimensional stability across handling cycles. The 50 mm length offers a practical balance between handling comfort and engagement depth for most bore checks, while the workshop-grade execution tolerates routine use in active production environments. Delivery in a protective transport case preserves the reference surface during storage and transit, reducing rework and downtime caused by accidental damage. Faster quality control and easy process integration As a compact inspection tool, the pin streamlines end‑dimension checks and shortens cycle times by removing intermediate setup steps: direct insertion and comparison replace more complex fixtures for many tasks. The consistent datum provided by the pin improves repeatability across operators and shifts, supporting lean inspection workflows and faster decision-making. Combined with Metav’s catalogue and logistics, this product supports reliable stock availability and consistent quality for serial inspections. For precision checks that demand 1 µm stability choose Metav IndustryLine gauge pins — contact Metav Werkzeuge for expert advice and prompt supply from Emmerich. Technical data Article number: M323.985 GTIN: 4061905061219 Weight: 0.033 kg Material: special steel Tolerance: ±0.001 mm Diameter: 9.85 mm Length: 50 mm Workshop execution Delivered in transport case Facts Diameter: 9.85 mm Length: 50 mm Weight: 0.033 kg Tolerance: ±0.001 mm GTIN: 4061905061219 Special features Single precision test pin for end-dimension checks Hardened special-steel construction Workshop-grade design for regular use Protective transport case for damage-free storage FAQ What is the dimensional tolerance of this test pin? The gauge pin M323.985 from Metav IndustryLine is manufactured to a tolerance of ±0.001 mm (1 µm), suitable for fine end‑dimension verification. For which applications is the pin intended? This single test pin is intended for end‑dimension checks, plug and bore verification, and use as a reference in workshop and quality‑control processes. What material is used for the pin and how long is it? The pin is made from special steel and has a length of 50 mm, combining durability with practical handling for routine inspections. Is the pin supplied ready for use or does it require calibration? The product is supplied as a ready test pin; any calibration status is provided in the accompanying documentation if declared at the point of sale. How does the transport case benefit storage and handling? The protective transport case included with delivery preserves the reference surface and reduces the risk of handling damage, extending the useful life of the gauge pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.86mm Matching Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of micron-level accuracy, compact handling and workshop-ready robustness for reliable end‑dimension checks; procure the Metav IndustryLine test pin directly via Metav Werkzeuge or consult the technical team if clarification is required. Test pin M323.986 (Metav IndustryLine) — 9.86 mm diameter, ±0.001 mm tolerance A test pin M323.986 designed as a precise end‑dimension reference for workshop inspection and fixture verification. Workshop-grade construction for daily use Diameter 9.86 mm with ±0.001 mm accuracy 50 mm overall length, compact handling Supplied in protective transport box Micron accuracy for decisive inspection results Built for applications where small deviations matter, the pin delivers a tolerance of ±0.001 mm — equivalent to one micrometre — which places it in the class of high‑precision reference gauges. The 9.86 mm diameter provides a stable datum for end‑dimension checks, while the 50 mm overall length offers sufficient engagement in blind or through holes without excess overhang. Constructed from special steel, the component maintains dimensional stability under routine workshop conditions, reducing the risk of drift and ensuring reproducible measurements that support sound quality decisions. Durable workshop design that withstands daily handling Engineered as a workshop version, the pin combines a compact form with practical resilience. At approximately 0.033 kg, the low mass supports easy manipulation during repetitive inspection tasks and minimises dynamic loading on fixtures. The supply in a protective transport box keeps the reference surface safe from knocks and contamination during storage and transit, which preserves the measuring quality and extends service life. This robustness translates into fewer interruptions for maintenance and a steadier inspection routine on the shop floor. Simple logistics and traceability for organised quality control Designed for straightforward integration into inspection workflows, the item is listed in the Messstifte category and supplied with clear identifiers for inventory control. Traceability is supported via standard product identifiers and the compact form factor suits use in inspection benches, dedicated gauges and fixture set‑ups where consistent end‑dimension referencing is required. The combination of a precise tolerance, stable material and transport protection makes this pin a dependable choice for repeatable verification tasks in assembly and machining contexts. Request a tailored supply or specification check from Metav Werkzeuge for the Metav IndustryLine test pin M323.986, dispatched from Emmerich with reliable stock handling Technical data Article number: M323.986 GTIN: 4061905062131 Category: Messstifte Weight: 0.033 kg Material: Special steel Length: 50 mm Facts Diameter: 9.86 mm Tolerance: ±0.001 mm Length overall: 50 mm Weight: 0.033 kg ECLASS: 21170231 Special features Workshop version construction Supplied in protective transport box Intended use: end‑dimension reference Story trigger: end dimension FAQ What measuring tolerance does the test pin offer? The Metav IndustryLine test pin M323.986 is specified to ±0.001 mm, corresponding to one micrometre of tolerance suitable for fine inspection tasks. Is calibration supplied with the pin? The product data do not indicate a factory calibration certificate; the item is supplied as a precision reference without an included calibration document. Which material is the pin made from? The pin is manufactured from special steel, chosen for its dimensional stability and suitability for repetitive inspection use. For which tasks is this test pin intended? The pin is intended as an end‑dimension reference for inspection, fixture verification and gauge assemblies where a defined diameter and high repeatability are required. How is the pin protected during transport and storage? The item is supplied in a protective transport box to safeguard the measuring surfaces against damage and contamination during handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.87mm Gauge Pin Single ±0.001 mm Length 50 mm Workshop Version - Metav IndustryLine
High-precision measurement with a durable workshop design: the combination of a 9.87 mm nominal diameter, ±0.001 mm tolerance and a 50 mm overall length delivers repeatable end‑measure checks and stable reference values. Benefit from a compact, single‑piece inspection pin made from special steel for consistent handling and long‑term use. Order the item directly via Metav Werkzeuge or consult our specialists for application advice. Test pin M323.987 – 9.87 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) The Test pin M323.987 is a single workshop‑grade inspection pin designed for precise end‑dimension referencing and routine inspection tasks in production environments. Workshop‑grade construction for durable use High precision ±0.001 mm tolerance Accurate 9.87 mm diameter reference 50 mm length for consistent end measurements Precision where repeatability matters The inspection pin is manufactured for high‑accuracy reference measurements, offering a ±0.001 mm tolerance that corresponds to a one‑micrometre window. Such precision reduces uncertainty in end‑size checks and supports process control in quality inspections. As a hardened reference element for end‑measure tasks, the pin provides stable contact conditions that help eliminate variability caused by inconsistent probing or fixturing. The result is reproducible measurement data that can be used to validate gauges, set up fixtures or verify component bores with confidence. Robust design for everyday workshop use Constructed from special steel and supplied as a single item, this inspection pin balances toughness with handling convenience. Its 50 mm length and compact mass (approx. 0.033 kg) make it easy to place, align and assess without cumbersome tooling. The workshop‑grade execution ensures that the element withstands repeated contact and maintains dimensional integrity in standard production conditions. Where routine checks are frequent, the combination of compact geometry and durable material reduces downtime for replacements and keeps inspection cycles efficient. Traceability and practical integration into routines Clear identification and stable dimensions support traceable inspection workflows. The pin is ideal as an end‑dimension reference or master pin for setting up measuring fixtures and quick go/no‑go verifications in assembly or inspection stations. With its nominal 9.87 mm diameter, the component suits applications that require a precise intermediate reference rather than a standard whole‑millimetre gauge. Its compact form and predictable contact behaviour simplify integration into existing measuring benches and jigs, supporting consistent process audits and repeat measurements. Contact Metav Werkzeuge to discuss how this Metav IndustryLine inspection pin fits into existing inspection routines or to request delivery and integration options. Technical data Article number: M323.987 GTIN: 4061905062148 Weight: 0.033 kg Material: Special steel Core specifications Diameter: 9.87 mm Tolerance: ±0.001 mm Length: 50 mm Special features Workshop execution Supplied as single item Nominal reference for end‑measure tasks FAQ What tolerance is offered by this inspection pin? The inspection pin is specified with a ±0.001 mm tolerance, giving a one‑micrometre accuracy window for precise end‑dimension checks. Is the pin suitable for routine workshop inspections? Yes. The workshop‑grade design and special steel construction make the pin suitable for frequent use in production inspection and fixture set‑up. Can this pin be used as a master for setting up gauges? This inspection pin is appropriate as an end‑dimension reference or master pin when a 9.87 mm nominal diameter is required for alignment and gauge validation. What is the product identification for ordering? The item is listed as Test pin M323.987 (SKU M323.987, GTIN 4061905062148) under the Metav IndustryLine range. How does the pin support repeatable measurements? The combination of the tight ±0.001 mm tolerance, stable geometry and durable material provides consistent contact conditions that reduce measurement variability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.88mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, sub‑micrometre accuracy and compact handling for reliable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for matching inspection kits. Gauge pin M323.988 — 9.88 mm, ±0.001 mm tolerance (50 mm length) by Metav IndustryLine The Gauge pin M323.988 is a workshop‑grade, single gauge pin designed for precise end‑dimension verification and plug‑gage tasks in small‑part and metrology applications. Workshop‑grade precision gauge pin Diameter 9.88 mm with ±0.001 mm tolerance 50 mm special steel, corrosion‑resistant finish Supplied in protective transport case Accurate end‑dimension checks with minimal setup The compact, single‑pin design offers repeatable high accuracy for end‑dimension and plug‑gage inspections. With a diameter of 9.88 mm held to ±0.001 mm, this pin reduces measurement uncertainty when matching bore sizes or verifying end‑masses, speeding up in‑process checks and lowering scrap rates. Constructed from special steel, the pin resists wear during frequent seating in small holes, preserving the nominal size over many cycles. The compact length supports quick handling and straightforward fixture use without complex alignment. Built for workshop environments and steady handling Classified as an ultra‑compact inspection tool, this pin suits fine mechanical and workshop tasks where space and handling comfort matter. The workshop‑grade finish and balanced mass ensure stable contact during manual or jig‑based checks; the 50 mm length provides enough engagement for secure positioning while remaining easy to manoeuvre. Supplied in a protective transport case, the set arrives ready for use on the bench and for safe storage between inspections, so traceability and component care are integrated into daily routines. Efficiency and compatibility in inspection workflows Integrating this gauge pin into inspection routines shortens setup time for standard bore checks and plug‑gage comparisons. The single‑pin format simplifies inventory handling and makes replacement straightforward when maintaining a kit of nominal sizes. Known dimensions and tight tolerance permit direct comparison against drawing limits or reference rings, enabling fast go/no‑go decisions and consistent quality control without elaborate equipment. For combined advice on compatible inspection sets and immediate dispatch from Metav Werkzeuge, contact our sales team in Emmerich for availability and matching tolerances. Technical data Article number: M323.988 GTIN: 4061905062155 Weight: 0.033 kg Diameter: 9.88 mm Length: 50 mm Accuracy: ±0.001 mm Material: Special steel Feature: Workshop version Facts Single gauge pin Supplied in protective transport case SKU: M323.988 Label: Prüfstift, einzeln, 9,88mm, +/- 0.001 mm Länge 50 mm Special features Robust surface finish Suitable for plug‑gage and end‑dimension checks Compact handling for fine mechanical work Protective transport case included FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.988 is specified with an accuracy of ±0.001 mm, providing sub‑micrometre control for critical end‑dimension checks. Is the pin suitable for frequent workshop use? Yes, the workshop‑grade construction and special steel composition make the pin resilient to repeated seating and typical bench handling. Does the delivery include protective packaging? The product is supplied in a protective transport case to ensure safe storage and transport of the gauge pin. Can this pin be used as a reference for go/no‑go checks? The nominal diameter and tight tolerance allow the pin to serve as a reliable reference for simple go/no‑go inspections and bore verification. What material is the pin made from and why does it matter? Made from special steel, the pin combines hardness and wear resistance to maintain dimensional stability over repeated use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.89mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Finish - Metav IndustryLine
Take advantage of the combination of ultra‑tight ±0.001 mm tolerance, compact 9.89 mm diameter and robust special steel construction for reliable end‑measure checks and repeatable setting routines. Order the gauge pin directly via Metav Werkzeuge or ask the consultants for batch availability and delivery options. M323.989 gauge pin — precision test pin, 9.89 mm, ±0.001 mm M323.989 is a precision gauge pin designed for end‑measure checks and reference use in fine mechanical and metrology applications Diameter 9.89 mm with ±0.001 mm tolerance 50 mm overall length for compact handling Made from special steel for wear resistance Supplied in protective transport case Consistent accuracy for go/no‑go and reference tasks High repeatability is a must for reference pins. This precision test pin delivers an exact diameter of 9.89 mm with an acceptance tolerance of ±0.001 mm, which supports stringent inspection routines and reliable go/no‑go evaluations. The fine tolerance reduces rework and inspection uncertainty, so measurement decisions are based on objective, reproducible data. Due to the small geometric deviation, the pin is particularly suitable for checks on finished bores, assembly fits and tooling set‑up where end‑measure accuracy directly impacts assembly quality. Compact form and workshop robustness for everyday use A 50 mm overall length and a compact shank make the pin easy to handle and position in confined spaces, while the special steel offers improved wear resistance for repetitive cycles. The product is supplied in a protective transport case, ensuring safe storage and reducing the risk of transit damage. Workshop execution emphasises practical durability: the surface finish and material selection are chosen to keep contact wear low and maintain diameter stability over many measuring cycles, which extends service life and reduces replacement frequency. How the pin improves inspection throughput and traceability Integrating the gauge pin into standard inspection sequences simplifies operator routines and accelerates throughput. The compact design shortens handling time during manual checks and the tight tolerance minimises borderline results that require secondary inspection. For documentation purposes, the SKU and GTIN allow clear traceability in parts lists and quality records. When used as a master reference or plug for end‑measure verification, the pin supports consistent part acceptance criteria and helps maintain production flow without unnecessary stoppages. Contact Metav Werkzeuge today to request availability of the M323.989 gauge pin, confirm batch quantities or obtain a quotation for precision inspection tools from the Metav range. Technical data Article number: M323.989 GTIN: 4061905062162 Brand: Metav IndustryLine Category: Gauge pins / Messstifte Facts Diameter: 9.89 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.033 kg Special features Material: special steel Workshop execution Supplied in protective transport case Intended use: end‑measure checks / reference pin FAQ What tolerance does this gauge pin have? The M323.989 gauge pin is manufactured to a tolerance of ±0.001 mm, providing high‑precision reference measurements. Is the pin suitable for repeated workshop use? Yes, the M323.989 is a workshop‑grade gauge pin made from special steel and supplied in a protective transport case for safe handling during repeated use. What measurements is the pin intended for? This gauge pin is designed for end‑measure checks, reference fits and final bore verification in fine mechanical and inspection workflows. How should the pin be stored to maintain accuracy? Store the pin in its protective transport case when not in use, avoid corrosive environments and handle with clean, lint‑free gloves to keep the diameter free from contaminants. Can the pin be used for setting fixtures and gauges? Yes, the pin serves well as a master reference for setting fixtures and plug‑type gauges where a stable, repeatable diameter is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.8mm Gauge Pin Single, ±0.001mm Accuracy, Length 50mm, Workshop Grade - Metav IndustryLine
Take advantage of a compact, workshop-grade measuring pin that combines 9.80 mm nominal diameter with ±0.001 mm tolerance and a 50 mm working length for reliable end-measurements; the result is faster inspection cycles and reproducible pass/fail decisions. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.980 — 9.80 mm, ±0.001 mm (50 mm length) A gauge pin M323.980 engineered for precision diameter verification and end-measurements in workshop and inspection environments. Workshop version for robust everyday use Diameter 9.80 mm with ±0.001 mm precision 50 mm length in special steel Supplied in transport case for safe handling Accuracy that shortens inspection time The combination of a 9.80 mm nominal diameter and a declared ±0.001 mm tolerance places this measuring pin in the high-precision segment for small diameters. Such specification reduces ambiguity at the pass/fail boundary and speeds up go/no-go decisions on production lines. In practise, the narrow tolerance translates to fewer repeat measurements and lower rework rates, which is particularly valuable in short-run production and precision assembly. The compact form supports quick manual gauging while maintaining a measurable reference standard for visual or tactile checks. Made for workshop conditions and repeatable handling Constructed from special steel, the pin is intended for regular workshop use where mechanical resilience and dimensional stability matter. The 50 mm length offers a good balance between reach and stiffness for inserting into bores, gauges or assemblies without introducing unnecessary flex. The workshop-grade designation signals manufacturing and finishing tolerances tuned to everyday industrial handling, giving a dependable feel in the hand and consistent seating in reference fixtures. Low mass and compact dimensions make it easy to manoeuvre during routine inspections. Integrates with common inspection routines This precision pin suits a range of small-diameter measurement tasks, from verifying bore end dimensions to establishing reference sizes in fixture set-ups. As a single measuring element, it fits alongside pin blocks, checker gauges and manual inspection benches; traceability is supported by the visible SKU and GTIN markings for inventory and quality records. Using a standard gauge pin simplifies training for operators: the functional concept—insert, seat, inspect—remains straightforward while measurement uncertainty is governed by the declared tolerance, not operator guesswork. Practical storage and traceability for quality workflows Supplied with a secure transport case, the pin is protected during transit and storage, helping to preserve its calibrated surface and dimensional integrity. With a clear SKU and GTIN, the item can be logged into stock systems and linked to inspection reports for audit purposes. The workshop-grade specification and single-pin format reduce handling complexity and support a tidy, reproducible measurement routine—advantages that contribute directly to a stable quality process and dependable inspection records. For dependable small-diameter checks, request the Metav IndustryLine gauge pin via Metav Werkzeuge — our consultants in Emmerich are available to advise on integration into existing inspection workflows. Technical Data Article number: M323.980 GTIN: 4061905064210 Brand: Metav IndustryLine Label: Gauge pin, single, 9.80 mm, ±0.001 mm, 50 mm length Facts Diameter: 9.80 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.033 kg Special features Workshop version Made from special steel Single gauge pin Supplied in transport case FAQ What is the declared tolerance of the pin? The pin is specified with a tolerance of ±0.001 mm, ensuring tight control for small-diameter acceptance checks using the M323.980 gauge pin. Which material is the pin made from? The measuring element is manufactured from special steel, chosen for dimensional stability and suitability for routine workshop use. What length and diameter does the item feature? This item has a working length of 50 mm and a nominal diameter of 9.80 mm, suitable for precision end-measurements. Can this pin be used with pin blocks and checker gauges? Yes; the single measuring pin format is compatible with common pin blocks and checker gauge setups for establishing reference diameters and carrying out inspection tasks. How is traceability handled for quality records? The product is identifiable by SKU and GTIN: 4061905064210, allowing straightforward entry into inventory and inspection documentation for traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.91mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Finish, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop-ready robustness, a ±0.001 mm tolerance and compact handling for reliable end-dimension checks; order the gauge pin directly via Metav Werkzeuge or consult our technical advisers for application support. Gauge pin, single – 9.91 mm, ±0.001 mm, 50 mm (Metav IndustryLine) The gauge pin, single, 9.91 mm is a high-precision inspection pin for fast go/no‑go and end‑dimension checks in workshop and inspection environments Workshop-grade special steel construction Tight tolerance ±0.001 mm for precise checks Delivered in protective transport case Predictable inspection results through tight tolerance A tolerance of ±0.001 mm translates to micrometre-level control, making this inspection pin suitable where reproducible pass/fail decisions are essential. The high precision reduces measurement uncertainty during plug and bore checks and supports consistent quality gates in small-batch production or repair work. Where traceable repeatability matters, the fine tolerance shortens inspection loops and lowers the risk of rework, thereby improving throughput and process stability. Robust material and compact handling for daily use Manufactured from special steel and offered in a workshop version, the pin combines wear resistance with practical handling. The 50 mm length provides working reach while maintaining stiffness for insertion tasks; at roughly 0.034 kg the component is easy to position yet stable under manual control. The compact format suits precision fitting, alignment and final‑dimension verification tasks where sturdy contact surfaces and a reliable feel are required. Practical shop-floor advantages that save time Designed for direct use as a single measuring element, this inspection pin supports rapid go/no‑go assessments and end‑dimension checks without additional adapters. The combination of small diameter and high accuracy reduces the need for repeated secondary measurements and speeds acceptance routines. As a result, flow of parts through inspection is smoother and inspection throughput improves, benefiting small workshops and subcontractors that depend on quick, defensible measurement outcomes. Ready for transport and traceable stock management Supplied as an individual inspection pin with clear identification (SKU M323.991 and GTIN), the unit is packed for transport to protect surface quality. The workshop-oriented supply concept helps maintain condition from storage to bench and simplifies inventory handling. Metav IndustryLine’s distribution acts as a quality filter for the European market, ensuring predictable availability and centralised ordering for workshop supplies and metrology accessories. Contact Metav Werkzeuge for advice on the Metav IndustryLine M323.991 gauge pin and to discuss delivery and suitability for specific inspection tasks Technical Data Article number: M323.991 GTIN: 4061905062742 Brand: Metav IndustryLine Dimensions & accuracy Diameter: 9.91 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.034 kg Materials & features Material: special steel Workshop version Delivered in transport case Single gauge pin FAQ What is the exact tolerance of this inspection pin? The inspection pin is specified with a tolerance of ±0.001 mm, providing micrometre-level precision for reliable pass/fail checks. Is the pin supplied ready for immediate use in a workshop environment? Yes, the Metav IndustryLine M323.991 is supplied as a workshop version and delivered in a protective transport case for immediate bench use. Which materials is this gauge pin suitable for checking? The inspection pin is intended for dimensional checks and is material‑independent for its measuring function; it is commonly used for final bore and shaft checks in metalworking environments. How is the product identified for ordering and inventory? The item is listed under SKU M323.991 and GTIN 4061905062742 for unambiguous ordering and stock management. Can this pin replace adjustable measuring tools for routine go/no‑go tests? For fixed-dimension checks, the single gauge pin offers a faster, repeatable alternative to setup-dependent measuring tools and is well-suited to standardised pass/fail inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.92mm Test Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
Take advantage of the combination of extreme dimensional stability, workshop‑grade robustness and compact handling for reliable end‑measure checks. The 9.92 mm gauge pin delivers a ±0.001 mm tolerance over a 50 mm length, and is supplied in a protective case for safe transport. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single, 9.92 mm — 9.92 mm ±0.001 tolerance, 50 mm length (Metav IndustryLine) A gauge pin, single, 9.92 mm designed for precise end‑measure and fit verification in workshop inspection and assembly tasks Workshop‑grade construction Diameter 9.92 mm with ±0.001 mm tolerance 50 mm length for end‑measure checks Special steel for high wear resistance Accuracy that lowers rejection rates The principal benefit of this inspection pin is its repeatable dimensional accuracy. With a stated tolerance of ±0.001 mm, the component provides a verifiable reference for finish checks, bore verification and end‑dimension control, reducing ambiguous measurements and rework. The dimension 9.92 mm is ideal where a near‑nominal fit is required; the tight tolerance stabilises process capability and supports consistent quality decisions during routine inspections. Built for the workshop — durable and transport‑safe Manufactured in a workshop execution and made from special steel, the pin resists surface damage and retains form under frequent handling. The supplied protective case ensures secure transport and prevents damage to the measuring faces during storage, which helps preserve the calibration state and prolong service life. This construction focuses on operational reliability so that inspection intervals remain predictable and downtime is reduced. Practical use and integration into inspection routines The single‑pin design makes it straightforward to integrate into gauge sets, plug checks and end‑measure routines. Operators can use the pin for quick go/no‑go verification, comparative gauging or as a datum for small‑batch assembly control. The compact length of 50 mm enables access to shallow bores and steps while maintaining sufficient gripping area for secure handling. Documenting results with a consistent physical reference supports traceable quality records and smoother communications across production and quality departments. Contact Metav Werkzeuge in Emmerich for purchasing advice, availability and integration into inspection kits — Metav IndustryLine stock and expert guidance are available for reliable measurement supply. Technical data Article number: M323.992 GTIN: 4061905062759 SKU: M323.992 Facts Diameter: 9.92 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.034 kg Special features Workshop execution Special steel material Delivered in a protective case FAQ What is the intended application of this gauge pin? This gauge pin is intended for precise end‑measure checks, bore verification and fit testing; the 9.92 mm diameter and ±0.001 mm tolerance make it suitable for high‑precision workshop inspections. Is the 9.92 mm gauge pin suitable for frequent use in a production environment? Yes, the workshop execution and special steel construction support frequent handling and regular inspection cycles; the protective case aids in maintaining the measuring faces between uses. How should the gauge pin be stored to preserve accuracy? Store the gauge pin in the supplied protective case and keep it in a stable, low‑humidity environment to avoid corrosion and accidental nicks that could affect the tolerance. Which reference identifies this item for ordering and stock purposes? Order and stock references include the SKU M323.992 and GTIN 4061905062759 for clear identification in procurement and inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.93mm Gauge Pin Single, ±0.001 mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of a compact, high‑accuracy measuring pin that combines a ±0.001 mm tolerance with a 9.93 mm diameter and a 50 mm length for reliable end‑measure checks; the robust special steel construction ensures workshop durability. Order the part directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin M323.993 — single 9.93 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A gauge pin M323.993 engineered for precision end‑measure verification and fixture setting in workshop and quality‑control environments. Precision tolerance ±0.001 mm Diameter 9.93 mm, length 50 mm Hardened special steel construction Workshop version for industrial use Accurate control for end measurements that reduce rework The core benefit of this tool is its reproducible dimensional reference: the ±0.001 mm tolerance and nominal 9.93 mm diameter provide a defined datum for go/no‑go checks and setting operations. Such tight specification reduces measurement uncertainty and downstream rework, supporting faster decision‑making in inspection routines and production control. The result is measurable improvement in process reliability and part conformity. Durable design suited to repeated shop‑floor use Made from special steel and supplied as a single, workshop‑oriented component, the pin combines stiffness with manageable handling in daily operations. With a length of 50 mm, it is long enough for secure insertion yet compact for easy handling and storage. The construction is aimed at repetitive checks where mechanical robustness is as important as dimensional fidelity, so the tool maintains serviceable life under frequent use. Practical compatibility across gauges and fixtures This single gauge pin serves as a precision reference in fixture setting, plug gauges and measurement benches where an exact diameter is required for alignment or verification. The compact form factor and standardised diameter make it suitable for retrofitting into existing jigs or bench setups. Traceability via the product identification supports orderly stock and inspection records. Clear identification and traceability for quality systems Product identity is provided through the supplied SKU and GTIN, enabling straightforward documentation in inventory and quality management systems. The compact weight supports easy handling and shipping while the defined tolerance class allows integration into formal inspection procedures and traceable measurement trails. For tailored advice or to secure stock of this Metav IndustryLine gauge pin, contact Metav Werkzeuge in Emmerich — the Metav team can confirm availability and suitability for specific inspection tasks. Technical data Article number: M323.993 GTIN: 4061905062766 SKU: M323.993 Brand: Metav IndustryLine Facts Diameter: 9.93 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.034 kg Special features Material: Special steel Delivery: single gauge pin Intended use: end measurements Version: workshop execution FAQ What is the dimensional tolerance of this gauge pin? The gauge pin M323.993 is specified to ±0.001 mm, making it suitable for tight end‑measure verification in workshop and QA contexts. Which material is used for the pin and what does that mean for durability? The pin is made from special steel, which provides the mechanical stiffness required for repeated insertion and dimensional stability during normal workshop use. Can this pin be used in existing fixtures and plug gauges? Yes, the single gauge pin M323.993 is intended as a precision reference and can be integrated into fixtures, bench jigs and plug gauge arrangements that accept a 9.93 mm diameter element. How is the product identified for stock and quality records? Identification is via the SKU M323.993 and GTIN 4061905062766, enabling straightforward record keeping within inventory and quality systems. What applications suit this gauge pin best? This pin is optimised for end‑measurement checks, fixture setting and precision alignment tasks where a tight nominal diameter and repeatable reference are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.94mm Gauge Pin Precision Steel, ±0.001mm, 50mm Length, Workshop Version, Supplied in Case - Metav IndustryLine
Take advantage of the combination of micrometric accuracy (±0.001 mm), a robust special steel construction and a compact 50 mm length for reliable end‑size verification and fast fixture set‑up. Order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin M323.994 — Test pin, 9.94 mm Ø, ±0.001 mm, 50 mm length The gauge pin designed for precise end‑measurement and fixture alignment in workshop inspection and assembly. 9.94 mm diameter precision pin ±0.001 mm tolerance for repeatable checks 50 mm length for fixture and gauge use Special steel, workshop execution Ensure repeatable measurement with micrometric tolerance A test probe with a ±0.001 mm tolerance delivers micrometric certainty where dimensional compliance is critical. The nominal 9.94 mm diameter and the declared tolerance mean that this pin is suitable for final size checks, control gauges and setup references in precision production. Using a hardened reference pin reduces uncertainty during go/no‑go verifications and diminishes the need for rework by catching deviations at the inspection step. The clear numeric specification supports process documentation and quality records, making the component well suited for tasks that demand reproducible accuracy and traceable dimensional control. Robust construction for demanding workshop use Constructed from special steel and supplied in a workshop execution, the item resists the surface wear that commonly affects small diameter plugs used every day on the shop floor. The 50 mm overall length provides sufficient reach for fixtures and gauge holders while keeping the pin rigid for consistent readings. The design focus on durability and repeatability ensures long service life under routine handling and frequent insertion cycles, which lowers replacement frequency and contributes to steady production throughput and cost efficiency. Practical integration into inspection and assembly workflows Compact and single‑piece in supply, the inspection pin integrates easily into standard pin blocks, fixture sockets and gauge holders. It works well in machine‑building, toolmaking and inspection benches where precise end measurements and alignment pins are required. The small mass and defined geometry simplify handling during repetitive checks and make the pin compatible with manual measuring benches as well as automated test stations. Where tighter control is needed, listing the pin’s numeric data in inspection plans helps technicians select the appropriate reference quickly and reduces setup time between batches. For measurement tasks requiring ±0.001 mm precision, contact Metav Werkzeuge in Emmerich for availability and expert advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M323.994 GTIN: 4061905062773 Description: Test pin, single, 9.94 mm, ±0.001 mm, 50 mm length Facts Diameter: 9.94 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.034 kg Special features Material: Special steel Workshop execution Single piece supply Category: Gauge pins FAQ What tolerance does the gauge pin offer? The gauge pin M323.994 from Metav IndustryLine is specified with a tolerance of ±0.001 mm for high‑precision end measurements. Is this pin suitable for fixture alignment and setting gauges? Yes. The 50 mm length and precise diameter make the inspection pin suitable for fixture alignment, gauge holders and reference applications in assembly and inspection workflows. Does the product come as a single item or in sets? This article is supplied as a single test pin; the entry describes a single‑piece delivery under SKU M323.994. Which industries benefit most from this type of pin? Machine construction, toolmaking and metrology stations benefit from the repeatability and compact design of this test pin produced under the Metav IndustryLine label. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.95mm Test Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
High-precision end‑measure control with a compact, workshop‑grade design: 9.95 mm diameter, ±0.001 mm tolerance and 50 mm length ensure repeatable fit checks and go/no‑go assessments; order directly via Metav Werkzeuge or consult our advisers for specification matching. Gauge pin M323.995 — 9.95 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.995 is a workshop‑grade inspection pin designed for precise end‑measure and fit testing in production and maintenance environments. Workshop‑grade construction Diameter 9.95 mm, tolerance ±0.001 mm Length 50 mm for fixture and bore checks Supplied in a protective transport box Precise dimensional control for end‑measure verification Accurate production relies on verifiable reference tools. The inspection pin provides a fixed 9.95 mm reference diameter with an accuracy of ±0.001 mm, making it suitable for tight tolerance checks and final acceptance testing. Its compact 50 mm shank is optimised for direct engagement with bores and locating features, reducing the need for intermediary gauges. The combination of a defined diameter and micrometric tolerance supports reliable pass/fail decisions and helps maintain process stability in machining and assembly operations. Robust workshop construction and handling benefits Manufactured from special steel and presented as a workshop‑version component, the pin is designed to withstand frequent use in industrial settings. The material choice balances hardness and corrosion resistance for sustained dimensional stability under normal workshop conditions. Delivery in a protective transport box simplifies storage and reduces handling damage during transit between toolrooms and shopfloor stations. The modest mass and compact form factor facilitate quick handling during inspection cycles while the solid construction maintains repeatability over many measurements. Practical integration into inspection routines As a dedicated end‑measure gauge, the pin serves as a straightforward reference for bore gauging, fixture set‑up and go/no‑go assessments. Its defined geometry minimises interpretation effort: simple insertion checks or comparative measurements with a calibrated measuring device provide immediate verification. For traceable quality records, the pin can be used alongside calibrated instruments to document conformity. Routine care—cleaning contact faces and avoiding impact—preserves the nominal dimension and the ±0.001 mm tolerance over repeated use, ensuring the tool remains a dependable element of the inspection toolkit. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and delivery from Emmerich Technical Data Article number: M323.995 GTIN: 4061905063138 SKU: M323.995 ECLASS: 21170231 Facts Diameter: 9.95 mm Tolerance/accuracy: ±0.001 mm Length: 50 mm Weight: 0.034 kg Special features Material: special steel Workshop version Supplied in protective transport box Label: Prüfstift, einzeln, 9,95mm, +/- 0.001 mm Länge 50 mm FAQ What is the primary use of this gauge pin? The gauge pin is intended for end‑measure and fit testing; the M323.995 gauge pin offers a fixed 9.95 mm reference with ±0.001 mm accuracy for bore checks and fixture verification. Is the pin suitable for production‑line use? Yes, the workshop‑grade construction and robust special steel make the pin appropriate for frequent use in production and maintenance inspection routines. How should the pin be stored between uses? Store the pin in its supplied protective transport box to prevent knocks and contamination; keeping contact faces clean preserves the nominal dimension and tolerance. Can the pin be used for calibration traceability? The pin functions as a reference in inspection workflows and, when used alongside calibrated instruments, supports traceable measurement records for quality documentation. What measures protect the dimensional stability of the pin? Avoid impact, remove debris from contact areas and store the tool in the transport box; the special steel construction mitigates corrosion and wear under normal workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.96mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Combine sub‑micrometre repeatability, robust special steel construction and a compact 50 mm length for consistent end‑measure checks; this results in fewer rejects and reliable inline verification. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.996 gauge pin — single test pin, 9.96 mm diameter, ±0.001 mm (Metav IndustryLine) M323.996 is a single‑piece gauge pin designed for high‑precision end‑measure inspections in workshop environments and quality control. 9.96 mm diameter with ±0.001 mm tolerance 50 mm effective length for stable seating Workshop execution for everyday use Precision that stabilises processes and reduces rework The pin offers an exceptional tolerance of ±0.001 mm (one micrometre), which turns small measurement deviations into predictable process data. In practice, that level of control supports tighter assembly fits and reduces the need for corrective rework; the result is measurable time savings on repeat inspections. The small 9.96 mm diameter makes the component suitable for fine inspection points where repeatability and minimal play are essential, while the short design minimises bending and operator influence during insertion. Compact workshop design for routine checking and layout work As a workshop execution component, the pin is tailored to regular shop‑floor use: the 50 mm length provides enough engagement to stabilise the part under test without becoming cumbersome. Supplied in a protective transport case, the item is protected during storage and transit, which preserves the dimensional integrity required for regular calibration cycles. Its modest mass and compact form factor make it suitable for bench‑top gauges, fixture checks and end‑of‑line verification tasks where space and handling speed matter. Robust material choice for consistent wear resistance Machined from special steel, the pin balances surface hardness with resistance to wear, delivering consistent contact geometry over many cycles. That material selection keeps the contact surface stable, so measurement uncertainty is driven by the tolerance itself rather than premature wear. For applications where traceable, repeatable checks are required, this combination of material and precision supports reliable quality decisions without frequent replacement. For consistent end‑measure accuracy and straightforward workshop integration, request the Metav IndustryLine M323.996 from Metav Werkzeuge or speak with our Emmerich consultants to confirm fitment and handling recommendations. Technical data Article number: M323.996 GTIN: 4061905063145 Brand: Metav IndustryLine Measurements Diameter: 9.96 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.034 kg Special features Material: special steel Workshop execution Supplied in transport case Category: gauge pin / test pin FAQ What is the intended use of this gauge pin? The M323.996 gauge pin is intended for end‑measure checks, fixture validation and end‑of‑line inspection tasks where a compact, high‑precision pin is required. Does the product include a calibration certificate? The product data does not state that a calibration certificate is supplied with the M323.996; please contact Metav Werkzeuge for clarification on calibration options. Is the 9.96 mm diameter suitable for fixture alignment? Yes, the 9.96 mm diameter and ±0.001 mm tolerance make the pin suitable for precise alignment points and repeatable seating in gauges and fixtures. What material is used and how does it affect longevity? The M323.996 is made from special steel, selected for wear resistance and stable contact geometry, which prolongs usable life under routine inspection cycles. Can this pin be used on the shop floor for frequent checks? Designed as a workshop execution item, the pin is intended for regular shop‑floor use and is supplied in a protective transport case to preserve dimensional integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com