Precision balances for reliable, large-range milligram measurement
Precision balances and weighing systems provide accurate milligram-level results across larger capacity ranges, delivering consistent measurements for quality control, production and formulation tasks. They serve laboratories, industry and trade by combining high accuracy with extended weighing ranges to improve throughput and traceability. Typical uses include sample analysis, batch formulation and incoming material checks, where precision, repeatability and capacity are critical performance criteria.
600 g Precision Caliper Scale 0.01 g Readability, Internal Auto-Calibration, Stainless Steel Pan, LCD 16.5 mm Display - KERN
Take advantage of the combination of reliable internal automatic calibration, fine 0.01 g readability and a compact stainless-steel weighing surface for accurate routine weighing and fast quality checks. Order the device directly via Metav Werkzeuge or consult our specialists for calibration and conformity options. KERN EWJ 600-2SM Compact precision balance — 600 g, 0.01 g readability The KERN EWJ 600-2SM is a compact precision balance designed for laboratory, jewellery and quality-control tasks where stable, repeatable results and simple operation are essential. Internal automatic calibration every 2 h Readability 0.01 g for fine measurement Windshield and removable weighing chamber Stainless steel weighing pan, 120 mm diameter Keep production and inspection within tight tolerances The balance combines a strain-gauge load cell with a high-resolution display to deliver repeatable 0.01 g readings across its 600 g range. This level of precision makes the instrument suitable for tasks that require consistent mass values, such as batch verification, component sorting and material sampling. The linearity ±0.03 g specification indicates small deviation across the range, providing confidence when comparing measurements over time or between workstations. Explanations of technical terms are included: a strain-gauge system converts mechanical deformation into an electrical signal, which the instrument processes to calculate weight reliably. Less downtime through integrated calibration and guided weighing Built-in internal automatic calibration, activated at timed intervals, reduces drift caused by temperature changes or daily use and minimises manual recalibration. The checkweighing mode with optical and acoustic signals supports fast sorting, dosing and portioning workflows by indicating under, within or over tolerance without additional calculation. The front panel follows a uniform operation philosophy with dedicated keys for main functions, simplifying routine tasks and reducing operator training time. A bargraph capacity indicator visibly shows remaining load capacity to prevent overloads. Flexible across laboratory and workshop environments This compact unit is delivered with a windshield and a removable weighing chamber (134 × 128 × 80 mm), protecting sensitive measurements from drafts while enabling easy cleaning and access for small samples. The stainless steel weighing pan resists corrosion and is simple to disinfect for jewellery, dental or polymer laboratories. Counting tasks benefit from low smallest-piece weights — down to 20 mg in laboratory counting mode — while routine piece-counting remains effective at higher thresholds. For legally regulated trade applications, the conformity calibration according to NAWI (2014/31/EU) is available but must be ordered at purchase. Built for practical operation and reliable supply Power flexibility comes from a universal plug-in adapter (100–240 V, 50/60 Hz) with CH, EU, UK and US plugs included, and an optional internal battery for portable use, charged in approximately 12 hours. The design tolerates normal laboratory climates (operating temperature 15–30 °C, up to 80% relative humidity) and a net weight of around 2.8 kg makes the unit straightforward to relocate between benches. With variants available without data interfaces, the device integrates into compact setups or remains a standalone, maintenance-light solution. Contact Metav Werkzeuge in Emmerich for tailored advice on the KERN EWJ 600-2SM, calibration options and conformity requirements — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: EWJ.600-2SM Manufacturer: KERN GTIN: 4045761194991 Country of origin: CN Tariff number: 90160010 Core specifications Weighing range: 600 g Readability: 0.01 g Repeatability: 0.01 g Linearity: ± 0.03 g Minimum weight (min): 0.5 g Smallest piece weight counting (laboratory): 20 mg Smallest piece weight counting (normal): 200 mg Display digit height: 16.5 mm Weighing pan diameter: 120 mm Net weight: 2.8 kg Operating temperature: 15–30 °C Max. ambient humidity: 80% Power supply: 100–240 V, 50/60 Hz (CH; EURO; UK; US plugs) Battery charge time: 12 h Features & versions Stainless steel weighing pan Strain-gauge load cell (Dehnungsmessstreifen) Internal automatic calibration, time-controlled every 2 h Checkweighing with optical and acoustic signals Windshield and removable weighing chamber 134×128×80 mm Protective cover included Option: calibration for legal-for-trade (NAWI 2014/31/EU) must be ordered with purchase Variants without data interfaces available Optional internal battery FAQ How accurate is the balance for routine weighing? The KERN EWJ 600-2SM achieves a readability of 0.01 g with repeatability of 0.01 g and linearity of ±0.03 g, suitable for precise routine inspections and small-batch quality checks. Can the balance be used for piece counting of small components? Yes; in laboratory counting mode the EWJ 600-2SM can resolve smallest piece weights down to 20 mg, while standard counting operates reliably at higher piece weights. Is legal-for-trade calibration available? Conformity calibration (NAWI 2014/31/EU) is available for the EWJ 600-2SM but must be ordered with the instrument; subsequent first-time verification cannot be performed without ordering the calibration during purchase. Does the balance require mains power only? The balance includes a universal plug-in adapter (100–240 V) with CH, EU, UK and US plugs; an optional internal battery is available for temporary portable use, charging in about 12 hours. How does the automatic calibration benefit daily operation? The instrument’s internal automatic calibration, executed at timed intervals, reduces manual intervention and stabilises results across temperature changes and prolonged use, improving uptime and consistency. KERN — Address: not provided; Contact: not provided
6000 g Precision Balance 0.1 g Readability, Internal Auto-Calibration, USB, Stainless Steel Pan 155×145 mm - KERN
Take advantage of a compact instrument that combines high-resolution weighing and automatic internal calibration to keep processes consistent and auditable; order the KERN EWJ 6000-1M via Metav Werkzeuge or consult our specialists for verification and application advice. KERN EWJ 6000-1M Precision balance — 6000 g / 0.1 g with internal calibration The KERN EWJ 6000-1M is a compact precision balance designed for laboratory and quality-control tasks, offering stable weighing, routine calibration and straightforward data transfer for regulated or internal workflows. 6000 g capacity with 0.1 g readability Internal automatic calibration every 2 h USB interface for direct data transfer Stainless-steel 155×145 mm rectangular pan Consistent accuracy for routine and regulated workflows The unit delivers 0.1 g readability across a 6000 g range, supported by a strain-gauge loadcell that provides reliable signal stability and ±0.3 g linearity. This level of precision and reproducibility makes the instrument suitable for tasks where repeatable results matter, such as component checking or material sampling. The technical specification emphasises measurable performance: repeatability at 0.1 g, a minimum routine tare/working weight of 5 g, and piece-counting capability down to 20 mg for laboratory counting, enabling confident evaluations and traceable records. Built-in calibration to reduce downtime and drift The balance features an internal automatic calibration that is time-controlled (every 2 hours), ensuring ongoing accuracy without manual intervention. For facilities requiring legal verification, an initial conformity assessment (Eichung) can be ordered at purchase; please note that first-time verification requires the full installation address and cannot be carried out retrospectively. The automatic adjustment function reduces calibration-related workflow interruptions and supports stable operation across different ambient conditions. Seamless data capture and task guidance Data transfer is handled via a USB data interface, enabling direct export of weighing results to a PC or compatible printer for documentation. The device incorporates an intuitive control layout where all main functions have dedicated keys, and a rising capacity bargraph indicates remaining weighing range at a glance. The integrated checkweighing mode provides both optical and acoustic signals to assist portioning, dosing or sorting tasks, which simplifies operator decisions and speeds up repetitive processes. A stainless-steel pan measuring 155×145 mm ensures a robust surface for routine use and easy cleaning. Practical design for laboratory and trade environments Constructed with a durable weighing pan and an included draft shield, the instrument balances compact footprint with user convenience: dimensions are 215×330×105 mm and the unit weighs 3.4 kg, making bench placement straightforward. The LCD display with 16.5 mm digit height provides clear readouts. Operational limits are specified: recommended ambient temperature 15–30 °C and maximum relative humidity 80%, while power is supplied via a multi-region plug adapter set (CH, EURO, UK, US). A rechargeable internal battery is available as an option; charge time is 12 h, supporting portable or intermittent use. For a reliable precision solution from KERN, contact Metav Werkzeuge for tailored advice, verification options and ordering—our consultants will advise on conformity requirements and application fit; eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical data Article number: EWJ.6000-1M Manufacturer: KERN GTIN: 4045761150768 Origin country: CN Numbers / Core technical data Weighing range: 6000 g Readability: 0.1 g Reproducibility: 0.1 g Linearity: ±0.3 g Minimum weight (routine): 5 g Pan size (rectangular): 155×145 mm Dimensions (W×D×H): 215×330×105 mm Weight: 3.4 kg Display digit height: 16.5 mm Operating temperature: 15–30 °C Max. ambient humidity: 80% Power input: 100–240 V, 50/60 Hz Battery charge time (optional): 12 h Special features Stainless-steel weighing pan Strain-gauge loadcell (Dehnungsmessstreifen) Internal automatic calibration, time-controlled (every 2 h) Checkweighing with optical and acoustic signals USB interface for data transfer Draft shield included Plug adapters supplied: CH; EURO; UK; US Optional initial legal verification (Eichung) — must be ordered with unit Piece counting: lab min piece weight 20 mg; normal 200 mg Typical applications: jewellery, quality control, laboratory, dental labs, plastics technology FAQ What is the maximum capacity and resolution of this balance? The KERN EWJ 6000-1M offers a weighing range up to 6000 g with a readability of 0.1 g, providing clear resolution for routine laboratory and quality-control tasks. Is the balance suitable for verified commercial use (legal-for-trade)? For applications requiring legal verification, the initial conformity assessment (Eichung) must be ordered at the time of purchase; the KERN EWJ 6000-1M can be supplied with this verification, subject to provision of the installation address. How does the automatic calibration work and what benefit does it provide? The instrument performs a time-controlled internal automatic calibration (every 2 hours), which minimises manual recalibration and maintains stable accuracy during continuous operation. Can measurement data be exported for documentation? Yes—the EWJ 6000-1M includes a USB data interface for direct transfer of weighing data to a PC or suitable printer, facilitating digital records and traceability. Which environments and applications is this balance intended for? The balance is designed for laboratory, jewellery, dental lab and quality-control environments; recommended ambient conditions are 15–30 °C and up to 80% relative humidity, making it suitable for standard indoor industrial and workshop settings. KERN – Origin: China; GTIN: 4045761150768; SKU: EWJ.6000-1M
6000 g Precision Calibrator Balance, Readability 0.05 g, Stainless Steel Pan, Checkweighing Function - KERN
Take advantage of a compact design with a 6000 g capacity and an integrated checkweighing function to speed up portioning and quality checks while saving bench space; order the KERN PFB 6000-2 directly via Metav Werkzeuge or ask our consultants if needed KERN PFB 6000-2 precision balance — 6000 g capacity with checkweighing The KERN PFB 6000-2 is a compact precision balance for laboratory, industrial and quality-control applications, offering rapid indication and a dedicated checkweighing mode for efficient portioning and sorting 6000 g capacity for larger samples Checkweighing with visual and audible signal Stainless steel weighing pan for easy cleaning Compact footprint for limited bench space Precise results without wasting bench space The PFB series delivers reliable weighing through a high-resolution strain-gauge measuring system, designed to maintain stability across the full 6000 g range. An ascending bargraph gives an at-a-glance view of remaining capacity, supporting quick decisions during batch preparation. With a clear LCD and 18 mm digit height, readings are easy to read even under busy laboratory lighting. Linearity of ±0.15 g and reproducibility of 0.05 g ensure consistent measurements for routine quality-control tasks, helping to reduce rework and speed throughput. Faster sorting and portioning with audiovisual guidance Equipped with an integrated checkweighing function, the instrument supports portioning and sorting by providing both optical and acoustic signals when items fall inside or outside set tolerances. Dedicated keys for primary functions follow KERN’s uniform operating philosophy, shortening training time and avoiding menu searches. For piece counting applications the balance distinguishes small parts reliably — the smallest piece weight for precision counting is specified at 200 mg, with standard counting down to 2 g — enabling efficient inventory checks and component batching without additional equipment. Robust build and straightforward operation for daily use Built for everyday laboratory and industrial environments, the unit features a stainless steel weighing pan for straightforward cleaning and corrosion resistance. A built-in spirit level and adjustable levelling feet permit precise levelling on uneven benches, which is essential for accurate results. Compact housing dimensions make the balance suitable for constrained workspaces while multiple country adapters (CH, EU, UK, US) are supplied for immediate use. Operating range of 15 °C–30 °C and a permitted ambient humidity up to 80% suit most indoor conditions encountered in production and testing areas. Contact Metav Werkzeuge to discuss the KERN PFB 6000-2, secure precise weighing solutions and benefit from reliable supply direct from Emmerich Technical data Article number: PFB-A SKU: PFB.6000-2 GTIN: 4045761202832 Manufacturer: KERN Country of origin: CN Tariff number: 90160010 Facts Capacity: 6000 g Reproducibility: 0.05 g Linearity: ±0.15 g Display digit height: 18 mm Weighing platform dimensions: 190×180×95 mm Housing dimensions (without detachable parts): 210×315×90 mm Net weight: 1.87 kg Operating temperature: 15 °C–30 °C Maximum ambient humidity: 80% Power input: 100 V–240 V, 50/60 Hz Smallest piece weight for counting (laboratory): 200 mg Display type: LCD Special features Checkweighing with optical and acoustic signal Strain-gauge (Dehnungsmessstreifen) measuring system Stainless steel weighing pan Capacity indicator bargraph Spirit level and adjustable feet included Uniform KERN operation with dedicated keys Power adapters included: CH; EU; UK; US Typical applications: Laboratory, Industrial, Quality control FAQ How accurate is the balance for routine laboratory checks? The KERN PFB 6000-2 offers reproducibility of 0.05 g and linearity of ±0.15 g, providing the stability required for standard laboratory and quality-control tasks. Can the instrument be used for portioning and sorting? Yes; the built-in checkweighing function provides both visual and audible signals to support precise portioning, dosing and sorting operations. Is the balance suitable for piece counting of small components? The device supports piece counting with a smallest piece weight for precision counting of 200 mg and normal counting down to 2 g, making it suitable for small-part inventories. What environmental conditions are acceptable for accurate weighing? Correct operation is specified for an ambient temperature range of 15 °C–30 °C and a maximum relative humidity of 80%, matching common indoor laboratory conditions. Are levelling and easy cleaning features included? Yes; a spirit level and adjustable levelling feet are supplied for precise setup, and the stainless steel weighing pan allows straightforward cleaning after use. Metav Werkzeuge — Emmerich am Rhein, Germany · info@metav-werkzeuge.com · +49 2822 7131930
6000 g Precision Caliper Balance, 0.1 g Readability, Checkweighing, Stainless Steel Pan - KERN
Benefit from precise weighing with a readability of 0.1 g, rapid checkweighing and a compact footprint that suits constrained bench spaces; combine accuracy, ease of use and reliable repeatability for consistent laboratory and quality-control workflows. Order the KERN PFB 6000-1 directly via Metav Werkzeuge or ask our consultants for tailored advice. KERN PFB 6000-1 Precision balance — 6,000 g capacity, 0.1 g readability The KERN PFB 6000-1 is a compact precision balance designed for laboratory work, industrial quality control and routine weighing tasks where accuracy, quick results and a small footprint are essential Checkweighing with visual and audible signal Dedicated keys for all main functions Compact footprint for limited bench space Stainless-steel weighing pan with spirit level Consistent precision for routine and analytical tasks The balance delivers precision and predictable results through a strain-gauge weighing system and a readability of 0.1 g, making it suitable for tasks that demand reliable mass determination. The 6,000 g capacity is paired with a clear LCD readout (15 mm digits) so values are easy to read, while the built-in bargraph capacity indicator helps prevent overloads. By combining a stable weighing cell with simple operation, the instrument reduces measurement variability and shortens handling time during repetitive procedures. Faster portioning and controlled checkweighing Equipped with checkweighing that gives both optical and acoustic feedback, the instrument supports portioning, dosing and sorting processes by signalling when a sample is within tolerance. The device’s dedicated keys provide one-touch access to main functions, speeding up workflows and reducing training time for staff. The audible alert and display indications make it straightforward to implement in production lines or test benches where rapid decisions are needed. Reliable counting and reproducible results Counting tasks benefit from the balance’s low piece-weight capability: in laboratory mode it detects pieces down to 200 mg, while normal counting mode supports practical workshop use from 2 g. The instrument’s reproducibility of 0.1 g and linearity ±0.3 g ensure consistent batch-to-batch comparisons, and the supplied spirit level with levelling feet allows correct installation for the best possible repeatability. These features together help maintain traceable outcomes in quality-control routines. Robust, compact design for limited bench space The unit combines a stainless-steel weighing pan (190×180 mm) with a compact housing (210×315×90 mm) and a transport-friendly weight of 1.88 kg, so it fits small benches without compromising durability. Supplied power adapters for CH, EURO, UK and US markets and a universal input of 100 V–240 V, 50/60 Hz make deployment straightforward across different sites. With operation specified between 15 °C and 30 °C and a maximum ambient humidity of 80%, the balance is ready for typical laboratory and industrial environments where controlled conditions are maintained. For reliable precision from KERN and hands-on guidance, contact Metav Werkzeuge in Emmerich to discuss technical requirements or to place an order via email or phone Technical data Article number: PFB-A SKU: PFB.6000-1 GTIN: 4045761202870 Manufacturer: KERN Origin: China Facts Capacity: 6,000 g Readability: 0.1 g Reproducibility: 0.1 g Linearity: ±0.3 g Weighing pan size: 190×180 mm Housing dimensions: 210×315×90 mm Weight: 1.88 kg Operating temperature: 15 °C–30 °C Max. ambient humidity: 80 % Power input: 100 V–240 V, 50/60 Hz Display digit height: 15 mm Special features Weighing pan material: stainless steel Weighing system: strain-gauge Checkweighing with visual and audible signal Capacity bargraph display Spirit level and levelling feet included Power adapters included: CH; EURO; UK; US Display type: LCD FAQ What capacity and readability does the balance provide? The KERN PFB 6000-1 precision balance offers a capacity of 6,000 g with a readability of 0.1 g, suited to many laboratory and quality-control applications. Is a checkweighing function available on this instrument? Yes — the balance includes a checkweighing mode that provides both visual and audible signals to support portioning, dosing and sorting tasks. Can the instrument perform piece counting and how small can pieces be? In laboratory counting mode the instrument recognises pieces down to 200 mg; in normal counting mode it is suitable for items from around 2 g upwards, enabling efficient inventory and component counting. How is the balance levelled to ensure accurate results? The balance is supplied with a built-in spirit level and adjustable levelling feet, allowing straightforward alignment to ensure stable and repeatable measurements. What environmental conditions are required for reliable use? Reliable operation is specified between 15 °C and 30 °C with a maximum ambient humidity of 80 %, conditions commonly met in laboratory and controlled production areas. Which power supplies and adapters are provided? The unit accepts 100 V–240 V at 50/60 Hz and is supplied with adapters for CH, EURO, UK and US sockets for convenient international use. KERN, Origin: China; Contact: —
6000 g Precision Caliper Scale With Internal Auto-Calibration, 0.1 g Readability, 155×145 mm Pan - KERN
Take advantage of the combination of precise weighing performance, automated internal calibration and compact bench footprint for reliable results in laboratory and quality-control workflows. Order the balance directly via Metav Werkzeuge or contact our consultants for tailored technical advice. KERN EWJ 6000-1SM — Compact precision balance with 6,000 g capacity and internal calibration The KERN EWJ 6000-1SM is a compact precision balance designed for laboratory and quality-control environments, offering automatic internal calibration and intuitive operation for repeatable, traceable weighing. Internal automatic calibration every 2 h Readability 0.1 g with 6,000 g capacity Stainless steel weighing pan 155×145 mm Optical and acoustic checkweighing signal Accurate results you can rely on The compact laboratory scale delivers high precision with a maximum capacity of 6000 g and a readability of 0.1 g, supported by a strain-gauge weighing system that translates load into stable electrical signals. Linearity of ±0.3 g and reproducibility of 0.1 g reduce measurement uncertainty, making the instrument suitable for jewellery checks, dental laboratories and quality-control tasks. The internal automatic calibration, carried out at two-hour intervals, ensures that accuracy is maintained without manual intervention, which is particularly useful in environments where ambient conditions vary. Designed for efficient workflows and straightforward operation Operation follows a unified KERN philosophy: essential functions have dedicated keys for fast access and minimal training time, while a capacity bargraph gives an immediate visual indication of the remaining weighing range. Checkweighing is supported with both optical and acoustic signals to speed up sorting and portioning processes and to reduce handling errors. The stainless steel weighing pan (155×145 mm) is corrosion-resistant and easy to clean; a transparent dust cover is included to protect samples and maintain stable results in busy benches. Power is supplied via a multi-region adapter set (CH, EU, UK, US) and an optional internal battery is available for portable or uninterrupted use. Compliance, application scope and practical details The instrument is prepared for applications requiring legal conformity: it complies with the NAWI directive framework but requires the separate ordering of an official verification (Eichung) if used for trade or legal measurement purposes; first-time verification cannot be carried out retrospectively. The scale is therefore a reliable choice for laboratories, plastics technology, quality control and jewellery trading when the appropriate conformity assessment is ordered. Measures and limits such as minimum weighing of 5 g, smallest piece counting weight for laboratory use of 20 mg, and ambient temperature range 15 °C to 30 °C should be observed to sustain the specified performance and lifetime of the device. Contact Metav Werkzeuge for specialist advice on integrating the KERN EWJ 6000-1SM into the workflow and arrange prompt delivery from our Emmerich location (info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271) Technical Data Article number: EWJ.6000-1SM Manufacturer: KERN GTIN: 4045761195004 SKU: EWJ.6000-1SM Origin: CN Facts Capacity: 6000 g Readability: 0.1 g Reproducibility: 0.1 g Linearity: ± 0.3 g Minimum weight: 5 g Smallest piece weight (laboratory): 20 mg Display digit height: 16.5 mm Weighing pan (rectangular): 155×145 mm Housing dimensions (without removable parts): 215×330×105 mm Net weight: 3.3 kg Operating temperature: 15 °C to 30 °C Max. ambient humidity: 80% Power supply: 100 V–240 V, 50/60 Hz (plug adapters CH; EU; UK; US) Battery charge time: 12 h Legal class: II Verification resolution (eichwerte): 1 g Tariff number: 84238129 eClass: 32120101 Special features Weighing system: strain-gauge load cell Internal automatic calibration, timed every 2 h Checkweighing with optical and acoustic signal Dedicated keys for main functions (KERN operation philosophy) Capacity bargraph display Dust/protection cover included Variants without data interfaces available Optional internal battery Intended applications: jewellery, quality control, laboratories, dental labs, plastics technology Note on legal use: verification (Eichung) must be ordered at purchase for legally regulated applications FAQ Is this balance suitable for legal-for-trade applications? The KERN EWJ 6000-1SM can be used for legally regulated applications when ordered with the required verification (Eichung) in accordance with NAWI 2014/31/EU; the first verification must be requested at the time of purchase and requires the full installation address. How does the automatic calibration work and why is it useful? The internal automatic calibration of the EWJ 6000-1SM runs at set intervals (every two hours) to compensate for minor environmental changes, maintaining measurement accuracy without manual adjustment and reducing downtime for routine checks. Can the balance be used away from mains power? An optional internal battery is available for the KERN EWJ 6000-1SM; the supplied charging time is approximately 12 hours and the device also includes multi-region plug adapters for flexible mains use. What level of precision can be expected for repeated measurements? The instrument provides a reproducibility of 0.1 g and linearity within ±0.3 g, offering dependable repeatability for laboratory and quality-control tasks where consistent results are essential. Which sample types and sectors is this balance intended for? This precision balance is designed for jewellery and gold trade, laboratory applications, dental laboratories, plastics technology and general quality-control processes where a compact, accurate bench scale is required. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271
6000 g Precision Caliper Scale, 0.1 g Readability, Removable Indicator, Stainless Steel Pan, DMS Strain Gauge, IP‑not specified - KERN
Benefit from precision and flexibility: the balance combines 0.1 g readability, a removable indicator and a stainless‑steel weighing pan to support accurate routine checks and safe handling of hazardous samples; order through Metav Werkzeuge or consult our specialists for tailored advice. KERN PCD 6K-4 Precision Balance with Removable Indicator, 6000 g / 0.1 g The PCD 6K-4 is a compact precision balance with a detachable display unit, designed for laboratory and industrial quality‑control tasks including weighing in glove‑bags and under fume hoods. High resolution: 0.1 g readability Removable indicator for flexible setups Stainless steel weighing pan 160×160 mm Protective hood, levelling feet included Consistent accuracy that reduces rework and inspection time The balance delivers a readability of 0.1 g and a maximum capacity of 6000 g, supported by a strain gauge (DMS) weighing system that ensures stable results in routine quality‑control workflows. Repeatability is 0.1 g and linearity is specified at ±0.3 g, figures that translate into reliable batch checks and fewer repeat measurements. For operators unfamiliar with laboratory metrology, repeatability refers to the balance producing the same value under the same conditions, while linearity indicates how closely readings match across the weighing range. These technical parameters reduce process variability and support traceable results for production records. Flexible, safe workflows for sensitive and volatile samples Designed with a separate weighing platform and a removable indicator, this balance supports weighing inside glove‑bags or under fume hoods — a practical solution for toxic, volatile or otherwise contaminated substances. The unit includes a protective hood and levelling feet plus a built‑in spirit level for exact setup. The PRE‑TARE function enables a manual pre‑deduction of container weight, accelerating fill‑control tasks, while the freely programmable display permits direct readouts in alternative units such as g/m or g/m², simplifying routine conversions and reducing data‑entry errors during production or QC checks. Practical operation, portability and integration into the lab Operation is user‑centric: the clear LCD with 21 mm digit height and intuitive controls speed up routine tasks, while the stainless‑steel pan (160×160 mm) offers robust handling and easy cleaning. Power options include a 9 V block battery with approximately 12 h runtime and an optional rechargeable supply; mains operation is supported via the supplied adapter with CH, EURO, UK and US plugs (220–240 V AC, 50 Hz). The compact footprint (housing dimensions 165×280×75 mm) and weight of 1.7 kg make the unit straightforward to reposition within the laboratory. For customers requiring certified verification, on‑site calibration by an approved test service is available to maintain measurement traceability and regulatory compliance. Contact Metav Werkzeuge in Emmerich for personalised technical advice, calibration options and procurement support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: PCD SKU: PCD.6K-4 GTIN: 4045761192058 Manufacturer: KERN Origin: CN Key specifications Weighing capacity: 6000 g Readability: 0.1 g Repeatability: 0.1 g Linearity: ±0.3 g Weighing pan (rectangular): 160×160 mm Platform dimensions: 161×161×7 mm Display digit height: 21 mm Weight: 1.7 kg Battery runtime: 12 h Battery charging time: 10 h Operating temperature: 5°C–35°C Max ambient humidity: 80% Input voltage: 220 V–240 V AC, 50 Hz Features & materials Weighing pan material: stainless steel Weighing system: strain gauge (DMS) Removable display / indicator PRE‑TARE function Programmable units (e.g. g/m, g/m²) Levelling feet and spirit level included Protective hood included Supplied mains adaptor with CH; EURO; UK; US plugs LCD display 9 V block battery option FAQ How precise is the balance for routine QC tasks? The PCD 6K-4 offers 0.1 g readability with repeatability of 0.1 g and linearity ±0.3 g, providing stable performance for routine quality‑control and production checks. Can the weighing platform be used inside a glove‑bag? Yes, the separate weighing platform and removable indicator are specifically intended to allow weighing inside glove‑bags or under fume hoods while the indicator remains outside. What power options are available for flexible lab layouts? The unit supports mains operation (220–240 V AC) with supplied adaptors for CH, EURO, UK and US plugs and can run from a 9 V block battery for approximately 12 h. Is the display programmable for non‑standard units? The display unit accepts free programming of weighing units, allowing direct readouts in customised units such as g/m or g/m² for specific production applications. Does the balance come with protective accessories for hazardous samples? A protective hood is included and the stainless‑steel pan and levelling feet aid safe handling and repeatable setups; the detachable indicator supports separation between operator and sample. KERN · Origin: China · SKU: PCD.6K-4
6000 g Precision Caliper Style Laboratory Balance 0.1 g Readability, Stainless Steel Pan 150×170 mm, IoT-Ready KERN
Take advantage of the combination of IoT-ready connectivity via the KERN Universal Port (KUP), high accuracy with 0.1 g readability and a compact footprint for efficient laboratory workflows; order the unit directly via Metav Werkzeuge or contact our consultants for tailored integration advice. KERN PCB 6000-1 Compact precision laboratory scale — 6,000 g, 0.1 g readability The PCB 6000-1 is a compact precision laboratory scale designed for laboratory, research and industrial applications where reliable, networked weighing and clear measurement results are essential. IoT-ready with KERN Universal Port High accuracy: 0.1 g readability Weighing capacity up to 6,000 g Stainless steel weighing pan 150×170 mm Seamless Industry 4.0 connectivity for automated workflows With its KERN Universal Port (KUP) the instrument is IoT-ready, allowing simple retrofitting of interface modules such as RS‑232, USB, Bluetooth, WLAN or Ethernet without opening the housing. The modular approach reduces downtime and simplifies integration into existing data infrastructures; the KERN Communication Protocol (KCP) further enables remote querying and control from computers or PLCs. This connectivity translates to tangible efficiency gains in data logging and process control, making networked weighing practical for production checkpoints and laboratory automation. Reliable measurement performance that supports quality control Built on a strain gauge weighing system, the device provides a weighing range up to 6,000 g with 0.1 g readability, reproducibility of 0.1 g and linearity of ±0.3 g. The anti-shock mounting between pan and sensor reduces vibration influence and delivers faster, stable results. Practical functions such as PRE‑TARE, a recipe function for multi-component dosing and a visual checkweighing signal help maintain consistent quality and minimise rework. These technical features support accurate quantification while keeping procedures straightforward for operators with varying levels of metrology experience. Compact design and practical operation for daily lab use The compact housing (245 × 167 × 82 mm) and a stainless steel weighing pan sized 150 × 170 mm keep the instrument space-efficient while providing a robust loading surface. The clear LCD with 21 mm digit height ensures legible results at a glance. Power options include a supplied plug-in adapter (CH; EURO; UK; US) and the possibility to operate from a 9 V block battery for up to 20 hours, which supports flexible placement in teaching or field settings. Compatibility with KERN EasyTouch software and the option to run up to three adapters in parallel via the extension box KUP‑13 further extend usability across documentation and reporting tasks. For specific advice on integrating the KERN PCB 6000-1 into your processes or to discuss calibration and software options, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: PCB SKU: PCB.6000-1 Manufacturer: KERN GTIN: 4045761084803 Country of origin: CN Facts Weighing range: 6,000 g Readability: 0.1 g Reproducibility: 0.1 g Linearity: ±0.3 g Weighing pan (rectangular): 150×170 mm Housing dimensions (without detachable parts): 245×167×82 mm Display type: LCD Display digit height: 21 mm Weight: 1.65 kg Power input: 100–240 V AC 50/60 Hz 0.5 A Battery: 9 V block Battery operating time: 20 h Operating temperature: 5 °C–35 °C Max. relative humidity (non-condensing): 80 % Tariff number: 84238129 Special features Weighing system: strain gauge KERN Universal Port (KUP) for interface adapters KERN Communication Protocol (KCP) Extension box KUP‑13 supports up to three adapters PRE‑TARE function Recipe function for multi-component dosing Checkweighing with optical signal Anti‑shock system between pan and load cell Stainless steel weighing pan Work protection cover included Compatible with KERN EasyTouch Supplied plug-in adapters: CH; EURO; UK; US FAQ How can the scale be connected to a laboratory network? The scale supports modular interface adapters via the KERN Universal Port (KUP); with suitable adapters it can connect by RS‑232, USB, Bluetooth, WLAN or Ethernet and transfer weighing data to PCs, tablets or printers. Is the accuracy sufficient for routine analytical tasks? Yes, the instrument offers 0.1 g readability, reproducibility of 0.1 g and linearity ±0.3 g, making it suitable for many laboratory and production quality‑control applications. Can the scale run on battery power for mobile use? Operation from a 9 V block battery is possible; the specified battery operating time is up to 20 hours, supporting temporary mobile or classroom use. Does the device support automated dosing or recipe workflows? A recipe function is available for sequentially weighing components; combined with PRE‑TARE and the visual checkweighing signal, the system simplifies dosing and portion control. Is calibration or software integration available? Calibration services and compatibility with KERN EasyTouch are supported; Metav Werkzeuge can advise on calibration options and software integration for documentation needs. Manufacturer: KERN; Supplier: Metav Werkzeuge, Emmerich am Rhein; Email: info@metav-werkzeuge.com; Tel: +49 2822 7131930; WhatsApp: +49 170 2837271
6000 g Precision Caliper-Type Lab Balance 1 g Readability, 150×170 mm Stainless Steel Pan, DMS System IoT-Ready - KERN
Benefit from the combination of network-ready connectivity via the KUP interface, a robust stainless steel weighing plate and precise 6000 g / 1 g measurement for reliable process integration and fast results. Order the instrument directly through Metav Werkzeuge or contact our consultants for application advice. KERN PCB 6000-0 compact laboratory balance — 6000 g / 1 g, IoT-ready The PCB 6000-0 is a compact precision laboratory balance designed for routine laboratory, educational and light industrial weighing tasks, offering straightforward integration into Industry 4.0 environments. IoT-ready KERN Universal Port (KUP) 6000 g capacity with 1 g readability Stainless steel weighing plate 150×170 mm PRE-TARE and recipe function for dosing Precision and repeatability that supports quality control The compact balance delivers consistent reproducibility (1 g) and a linearity of ±2 g, making it suitable for routine checks and simple production control. The strain-gauge weighing system ensures stable measurement behaviour under normal laboratory conditions, while the modest footprint and a stainless steel weighing surface simplify cleaning and maintenance. These characteristics translate directly into fewer process interruptions and more dependable daily throughput. Flexible connectivity to simplify data transfer and automation Equipped with the IoT-ready KERN Universal Port (KUP), the instrument accepts plug-in interface adapters for RS-232, USB, Bluetooth, WLAN or Ethernet, enabling quick connection to PCs, tablets, printers and networks without opening the housing. The optional extension box (KUP-13) permits up to three adapters to run in parallel. For remote interrogation and control, the KERN Communication Protocol (KCP) supports automated data collection and basic command sequences, reducing manual entry and integration effort in production lines or laboratory information systems. Practical functions that support dosing and counting tasks Built-in routines such as PRE-TARE, a recipe function for multi-component weighing and checkweighing with an optical indicator support typical laboratory and educational workflows. The recipe feature stores component weights and displays total mass for verification, while the checkweighing mode provides a visual aid for portioning, speeding up repetitive tasks and lowering error rates. The display is an easy-to-read LCD with 21 mm digit height for quick result checks. Power options and robustness for workshop and classroom use Power is supplied via the included plug-in mains adapter (100–240 V AC), with a 9 V block battery option for up to 20 h of operation between charges (battery available as an option). The housing dimensions (163×245×79 mm) and a modest instrument weight of 1.65 kg make the unit portable within a facility, while the anti-shock mounting between pan and load cell reduces vibration influence for faster stabilisation and reliable readings. A protective cover is included for everyday protection of the weighing surface. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating KERN’s PCB 6000-0 into existing workflows and to arrange supply directly to your workshop. Technical Data SKU: PCB.6000-0 GTIN: 4045761084841 Manufacturer: KERN Origin: CN Facts Weighing range: 6000 g Readability: 1 g Reproducibility: 1 g Linearity: ± 2 g Weighing pan: 150×170 mm (rectangular) Housing dimensions: 163×245×79 mm Instrument weight: 1.65 kg Display digit height: 21 mm Operating temperature: 5 °C–35 °C Max. ambient humidity: 80% Power input: 100–240 V AC 50/60 Hz 0.5 A Battery: 9 V block (optional) Battery charging time: 8 h Battery runtime: 20 h Special features Strain-gauge weighing system (DMS) IoT-ready KERN Universal Port (KUP) for plug-in adapters Supports RS-232, USB, Bluetooth, WLAN, Ethernet via adapters Extension box KUP-13 for up to three adapters in parallel KERN Communication Protocol (KCP) for remote control and data query PRE-TARE function for known container weight subtraction Recipe function for multi-component weighing and total check Checkweighing with optical signal for dosing and sorting Anti-shock system between weighing pan and load cell Stainless steel weighing plate Protective dust/cover included Compatible with KERN EasyTouch software Mains adapters included: CH, EURO, UK, US FAQ What is the maximum capacity and readability of this balance? The balance has a maximum capacity of 6000 g and a readability of 1 g, making it suitable for routine laboratory and teaching tasks with moderate precision requirements. Can the balance be connected to a laboratory PC or network? Yes. The unit is IoT-ready via the KUP interface and accepts plug-in adapters for RS-232, USB, Bluetooth, WLAN or Ethernet; the KUP-13 extension box allows up to three adapters to operate simultaneously. Is remote control or automated data capture supported? Remote queries and basic control are possible using the KERN Communication Protocol (KCP), enabling integration of weighing data into automated workflows or database systems. Does the instrument support dosing or recipe workflows? The instrument offers a PRE-TARE function and a recipe mode that stores component weights and displays total mass, and it features checkweighing with an optical indicator to support portioning and sorting. What power options are available and how long does the battery last? The balance is supplied with a plug-in mains adapter (100–240 V AC). A 9 V block battery is available as an option and provides approximately 20 hours of operation after an 8-hour charge. KERN · Origin: China · GTIN: 4045761084841
6000 g Precision Lab Scale 0.1 g Readability, 150×170 mm Stainless Steel Pan - KERN
Compact footprint, reliable precision and user‑friendly operation combine to make this balance a practical choice for everyday laboratory tasks; the compact design, 0.1 g readability and 6,000 g capacity support consistent workflows. Order the instrument directly via Metav Werkzeuge or consult our specialists for tailored advice. KERN 440-49A compact precision laboratory balance — 6,000 g / 0.1 g The KERN 440-49A is a compact precision laboratory balance designed for routine weighing, percentage determinations and piece counting in space‑constrained workbenches. Compact footprint 168×230×80 mm Readability 0.1 g, reproducibility 0.1 g 6,000 g capacity with 150×170 mm pan Mains and battery operation, up to 20 h Reliable precision for routine workflows The instrument offers precision and repeatability for daily laboratory tasks thanks to a strain‑gauge DMS load cell and a reproducibility 0.1 g specification. The combination of 0.1 g readability and a maximum capacity of 6,000 g allows both small sample analysis and heavier batches to be processed without frequent scale changes, improving throughput and reducing handling time. Linearity of ± 0.3 g ensures consistent readings across the weighing range, which supports process control and documentation in regulated environments. Compact design that saves bench space With a compact footprint of 168×230×80 mm and a rectangular stainless steel weighing pan sized 150×170 mm, the balance is suited to laboratories with limited bench space. The clear LCD with 15 mm digit height presents results at a glance, while the included draft shield (work protection hood) reduces assay variability when handling small or lightweight samples. The modest instrument weight (1.18 kg) and robust housing make integration into mobile test stations straightforward. Practical functions that support daily tasks Equipped with a percent function for tare‑based target weighing and a piece‑counting mode with defined minimum piece weights for laboratory and normal counting, the unit simplifies repetitive tasks and minimises calculation errors. The balance accepts mains power (100–240 V AC) and offers battery operation (9 V block) with a battery runtime of up to 20 hours; an optional rechargeable battery and a charging time of 10 hours are available for extended field use. The package includes universal adapters (CH, EU, UK, US) for immediate deployment across locations. Compliance, calibration and handling explained The model follows standard expectations for everyday laboratory balances and provides a clear reference for minimum sample handling: the US minimum sample weight (USP) is a benchmark for the smallest permissible sample mass in standardised methods and should be observed when preparing regulated assays. For traceable performance, Metav Werkzeuge offers calibration services and can advise on compliance requirements and suitable procedures. The stainless steel pan and straightforward operating modes reduce maintenance time and support reliable long‑term operation. Contact Metav Werkzeuge to discuss delivery from Emmerich, calibration options and how the KERN 440-49A can be integrated into existing workflows Technical data SKU: 440-49A Manufacturer: KERN GTIN: 4045761068445 Category: Laboratory balances Numbers / Core technical data Weighing range: 6,000 g Readability: 0.1 g Reproducibility: 0.1 g Linearity: ± 0.3 g Weighing pan: 150×170 mm Housing dimensions: 168×230×80 mm Instrument weight: 1.18 kg Display digit height: 15 mm Operating temperature: 5–35 °C Max ambient humidity: 80% Battery runtime: 20 h Battery charging time (optional): 10 h Power input: 100–240 V AC 50/60 Hz 0.5 A Designs / Special features Weighing system: DMS load cell (strain gauge) Pan material: stainless steel weighing pan Percent determination function Draft shield / work protection hood included Piece counting modes (lab and normal) — min piece weight 200 mg / 2 g Power options: mains adapter (CH; EU; UK; US) and 9 V block battery Optional rechargeable battery available Origin: China FAQ What is the smallest increment this balance displays? The KERN 440-49A precision laboratory balance displays readings in 0.1 g increments, suitable for routine analytical tasks that require this resolution. Can the instrument perform percentage‑based weighing? Yes — the built‑in percent function enables tare‑based target weighing and quick assessment of deviation from a predefined 100% reference, ideal for formulation and QC checks. Is a draft shield included for small samples? A work protection hood (draft shield) is included with the unit to reduce air‑current effects and improve stability when weighing small or lightweight samples. What power options are available for field and bench use? The balance is supplied with a universal mains adapter (100–240 V AC) with CH, EU, UK and US plugs and supports 9 V block battery operation with up to 20 hours runtime; an optional rechargeable battery and 10‑hour charging time are listed. Is the balance suitable for piece counting and what are the minimum piece weights? Counting is supported with two reference modes: laboratory counting with a minimum piece weight of 200 mg and normal counting with a minimum of 2 g, providing flexibility depending on the application. KERN — Origin: China; Distributor: Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930
6000 g Precision Laboratory Balance 1 g Readability Stainless Steel Pan 150×170 mm, 165×230×80 mm - KERN
Compact precision and a robust stainless steel weighing pan paired with a 6,000 g capacity and 1 g readability deliver dependable routine results; integrated percent-weighing and an included protective cover support repeatable workflows. Order the KERN 440-53N directly via Metav Werkzeuge or ask our consultants if needed. KERN 440-53N Laboratory Scale – 6,000 g capacity, 1 g readability The KERN 440-53N is a compact precision laboratory scale designed for routine weighing, percent determination and space-restricted benches Compact dimensions for tight lab spaces 6000 g capacity with 1 g readability Percent weighing for target-value checks Stainless steel weighing pan, protective cover included Precision where bench space is limited The compact footprint (165×230×80 mm) and low instrument weight make this scale an efficient choice for small laboratories and mobile testing stations. With a rectangular stainless steel weighing pan (150×170 mm) the instrument resists corrosion and cleans easily, supporting hygienic handling and fast changeovers. The modest overall size does not compromise usability: clearly readable figures on the LCD and a stable mechanical layout ensure reliable handling even in confined work areas. Repeatable results and compliance for everyday tasks With 1 g readability and reproducibility of 1 g, the scale is suitable for routine checks, batch preparation and quality-control tasks that demand repeatable outcomes. Linearity is specified as ±2 g across the range, and the device uses a strain gauge (DMS) weighing system for consistent performance. The built-in percent-weighing mode simplifies formulation and deviation checks by allowing items to be weighed against a defined 100% reference. The US minimum sample weight (USP) is indicated as a guideline for smallest acceptable sample masses in regulated workflows. Long runtime and clear information during operation Power flexibility helps keep operations continuous: the instrument accepts mains power (100–240 V AC 50/60 Hz) and can be used with a 9 V block battery, offering approximately 20 h runtime for occasional mobile use. A set of adapters for CH, EURO, UK and US sockets is included for straightforward international deployment. The LCD display with 15 mm digit height provides a legible readout at a glance, and the supplied protective cover reduces draught effects and contamination risks, preserving measurement stability. Efficient integration into laboratory routines Rated to 6,000 g, the model supports a wide range of daily tasks while remaining simple to operate and maintain. The combination of a corrosion-resistant weighing plate, compact housing and a proven load-cell principle makes this instrument a practical choice for educational, industrial and clinical environments where space and reliability matter. For traceable results and predictable service lifecycles, the device is ready for routine calibration and on-site verification through authorised service channels. For expert advice and secure supply of the KERN 440-53N, contact Metav Werkzeuge in Emmerich by email or phone to discuss calibration options and delivery. Technical data Article number: 440 SKU: 440-53N GTIN: 4045761013179 Manufacturer: KERN Country of origin: CN Core specifications Weighing range: 6000 g Readability: 1 g Reproducibility: 1 g Linearity: ±2 g Weighing pan: 150×170 mm Housing dimensions: 165×230×80 mm Instrument weight: 1.18 kg Display digit height: 15 mm Operating temperature: 5–35 °C Max ambient humidity: 80% Battery runtime: 20 h Features & materials Weighing pan material: stainless steel Weighing system: strain gauge (DMS) Percent weighing function Protective cover included Power supply: 100–240 V AC 50/60 Hz 0.5 A Power adapters included: CH; EURO; UK; US Display type: LCD Battery: 9 V block (optional) Minimum sample weight guidance: USP FAQ What is the smallest readable increment on this scale? The KERN 440-53N offers a readability of 1 g, making it suitable for routine laboratory tasks that require whole-gram precision. Can the instrument run on battery power? Yes. The model can operate from a 9 V block battery with an approximate runtime of 20 h, while mains power is supported via the supplied adapters. Is there a mode for percentage weighing or formulation control? A percent-weighing function is included, which allows items to be weighed against a predefined 100% reference for quick deviation and formulation checks. What materials and environments is the scale designed for? The weighing pan is made of stainless steel for corrosion resistance; the operating range is 5–35 °C with a maximum ambient humidity of 80%. How precise and repeatable are the measurements? Linearity is ±2 g and reproducibility is specified as 1 g, ensuring consistent results for everyday quality control and batch preparation. Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271
600g Precision Laboratory Balance 0.01g Readability, Stainless Steel Pan 105mm, Load Cell DMS, LCD - KERN
Take advantage of a compact, high-precision solution that combines reliable 0.01 g readability, robust strain-gauge technology and practical percent-weighing for consistent routine results — available via Metav Werkzeuge for tailored advice and acquisition. KERN 440-35A Compact Precision Laboratory Balance with 0.01 g Readability The KERN 440-35A is a compact precision laboratory balance designed for routine weighing and percentage determinations in small laboratories and production testing environments. Compact footprint for confined bench spaces Percent determination for target-value weighing Draft shield included for stable readings Consistent, traceable weighing for everyday laboratory tasks The balance uses a strain gauge load cell to deliver stable measurement behaviour and a readability of 0.01 g, giving a dependable basis for routine sample work and quality checks. Linearity of ±0.03 g and reproducibility of 0.01 g support reproducible results, while the unit is suitable where the USP minimum sample weight must be observed. This level of technical performance reduces retesting and increases throughput by cutting uncertainty at the point of measurement. Small footprint with portable power and clear display With a compact housing and a stainless-steel pan of 105 mm diameter, the instrument fits neatly onto crowded benches and mobile test stations. The 15 mm LCD digits ensure readings are easy to read at a glance. Power is provided via the included universal mains adapter (100–240 V AC, adapters for CH, EU, UK, US supplied); an optional 9 V battery offers up to 20 h of operation with a charging cycle of approximately 10 h, enabling short-distance portability and uninterrupted workflows during site moves or temporary stations. Practical functions that streamline weighing procedures Integrated percent determination simplifies tasks where ingredients or samples must match a preset reference value, reducing manual calculation and process steps. The supplied draft shield keeps airflow and environmental disturbances from affecting low-mass readings, improving accuracy for small sample masses. The stainless-steel weighing pan and robust construction allow easy cleaning and long service life, while the straightforward control layout supports fast staff training and consistent daily operation. For precision that fits the workbench, choose the KERN 440-35A and discuss application-specific options with Metav Werkzeuge — contact our Emmerich team by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for expert guidance and ordering. Technical data Article number: 440 SKU: 440-35A GTIN: 4045761068438 Manufacturer: KERN Country of origin: CN Eclass: 32120101 Tariff code: 90160010 Core specifications Readability: 0.01 g Weighing range: 600 g Weighing pan diameter: 105 mm Dimensions (W×D×H): 165×230×80 mm Weight: 0.96 kg Display digit height: 15 mm Power input: 100–240 V AC 50/60 Hz 0.5 A Battery type: 9 V block (optional) Battery runtime: 20 h Charging time: 10 h Operating temperature: 5 °C–35 °C Max. relative humidity: 80 % Linearity: ± 0.03 g Reproducibility: 0.01 g Materials & special features Weighing plate material: stainless steel Weighing system: strain gauge load cell Draft shield: included Function: percent determination Minimum sample weight: USP minimum sample weight note Adapters included: CH; EURO; UK; US Product category: Laboratory balances FAQ What accuracy can be expected for routine weighing with this balance? The KERN 440-35A delivers a readability of 0.01 g with reproducibility of 0.01 g and linearity of ±0.03 g, which is suitable for routine laboratory and quality-control tasks requiring consistent low-gram resolution. Is the balance suitable for percentage-based formulations? Yes. The balance includes a percent-determination function that enables weighing to a preset 100 % reference and quickly reports deviations from that target, streamlining formulation and dosing workflows. Can the unit be used away from a power outlet? An optional 9 V battery is supported; when fitted, the unit can operate for up to 20 hours, with a charging time of approximately 10 hours, making short-term portable use practical. How does the draft shield affect measurements? The supplied draft shield reduces the influence of air currents and thermal drafts on low-mass readings, improving stability and repeatability when measuring small sample quantities. What materials and environments is this balance suited to? The weighing plate is made of stainless steel, and the instrument is specified for operation between 5 °C and 35 °C at up to 80 % relative humidity, making it appropriate for most standard laboratory and workshop conditions. Manufacturer: KERN — Country of origin: China • Distributor: Metav Werkzeuge, Emmerich am Rhein • info@metav-werkzeuge.com • +49 2822 7131930
620 g Precision Balance Three-Point Tuning-Fork Weighing System 0.001 g Readability 158×130×78 mm Windshield Included - KERN
Benefit from the combination of ultra-fine readability (0.001 g), a robust tuning‑fork weighing system and stable temperature performance for reliable, repeatable results in routine laboratory workflows; order the balance directly via Metav Werkzeuge or consult our specialists for application advice. KERN EG 620-3NM — Precision balance with 620 g capacity and 0.001 g readability KERN EG 620-3NM is a precision balance designed for laboratory, pharmaceutical and precious‑metal applications, offering fine‑scale weighing with a protective windscreen and integrated work cover. Classic tuning‑fork weighing system Readability 0.001 g for ultra-fine results Stainless‑steel weighing pan, Ø 118 mm Integrated windscreen and work cover included Consistent accuracy for sensitive laboratory tasks The tuning‑fork weighing system provides a stable measuring principle that is less affected by environmental disturbances than many alternative sensors; this translates into fast settling times and a reproducibility of 0.001 g, ensuring dependable repeat measurements for trace‑sensitive tasks. An internal adjustment via a side knob allows precise recalibration on site, maintaining measurement confidence without complex procedures. Linearity is specified as ±0.004 g, which supports quantitative work where small deviations must be avoided. For users who require a clearly defined minimum sampling threshold, the instrument indicates a minimum sample weight of 0.1 g, aiding method planning and compliance with pharmacopoeial recommendations. Robust build and workplace integration reduce downtime Designed for everyday use, the unit combines a stainless‑steel weighing pan with high mechanical robustness and elevated corner‑load safety to withstand routine handling. Stable temperature behaviour reduces drift in environments between 10°C and 30°C, while a sealed weighing chamber (158×130×78 mm) and supplied windshield keep drafts from affecting results. The compact housing (240×185×75 mm) and a net weight of 1.95 kg make the instrument straightforward to site on a bench or in a controlled cabinet. Power is supplied by a plug‑in adapter with CH, EU, UK and US plugs included, and an optional battery is available for mobile or temporary installations. Practical functions that save time and cut error sources Operational aids focus on efficiency and error reduction: a rising bar‑graph capacity indicator visualises remaining range, while part‑counting with summation supports inventory and component analysis with a smallest piece weight down to 1 mg in laboratory counting mode. The LCD with 17 mm digits gives clear readout and the compact footprint eases workflow integration. For laboratories that require repeatable workflows, the combination of short settling time and user‑friendly display reduces handling time and the potential for operator error, improving throughput without sacrificing precision. Certified use and typical application areas The instrument is suitable for pharmacies, chemical industry, gold and precious‑metal trade, cosmetics production and general laboratory applications, where fine resolution and reproducibility are required. For applications that demand legal verification (NAWI 2014/31/EU), a conformity assessment must be ordered at the time of purchase, since subsequent initial verification is not possible; the full installation address is required for that process. The balance also supports USP considerations: the minimum sample weight helps users comply with pharmacopeial minimum sample requirements for accurate measurement. Manufactured by KERN in Japan, this model is a proven choice where repeatability and robust operation are decisive. Discuss the KERN EG 620-3NM with Metav Werkzeuge’s specialists in Emmerich for tailored advice or to arrange prompt supply directly from our warehouse in Emmerich am Rhein — contact via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: EG-AM SKU: EG.620-3NM GTIN: 4045761212633 Manufacturer: KERN Country of origin: JP Tariff code: 90160010 Facts Weighing range: 620 g Readability: 0.001 g Reproducibility: 0.001 g Linearity: ± 0.004 g Minimum weight: 0.1 g Smallest piece weight (counting lab): 1 mg Pan diameter: 118 mm Weighing chamber B×T×H: 158×130×78 mm Housing dimensions: 240×185×75 mm Weight: 1.95 kg Display digit height: 17 mm Operating temperature: 10°C–30°C Max relative humidity: 80% Input voltage: 220 V–240 V AC, 50 Hz Battery charging time: 12 h Special features Weighing system: tuning‑fork Weighing pan material: stainless steel Windshield: included Work cover: included Internal adjustment: side knob Capacity indicator: bar graph Summation and parts counting functions Power adapters included: CH; EU; UK; US Verification class: I Typical applications: pharmacies, chemical industry, precious‑metal trade, cosmetics, laboratories FAQ What is the smallest readable increment of this balance? The balance provides a readability of 0.001 g, enabling ultra‑fine measurements suitable for trace analyses. Can the instrument be used away from mains power? An optional battery is available for mobile use; battery charging time is specified as 12 hours. Is the device suitable for pharmaceutical use and legal verification? For legally verified use under NAWI 2014/31/EU, the balance requires a conformity assessment at purchase; a later initial verification cannot be performed without that prior order. How does the tuning‑fork system benefit daily laboratory work? The tuning‑fork weighing system ensures stable readings with short settling times and reduced susceptibility to environmental interference, improving throughput and repeatability. What accessories are included with delivery? The delivery includes a windshield, work cover and plug‑in adapter set for CH, EU, UK and US sockets. KERN — Japan — contact information not provided
620 g Precision Balance With 0.001 g Readability, Stainless Steel Pan 118 mm, LCD Display, Tare, Calibration Program - KERN
Benefit from a robust tuning‑fork weighing system, 0.001 g readability and a compact footprint for reliable laboratory throughput; order the KERN EW 620-3NM directly via Metav Werkzeuge or ask our consultants for application advice. KERN EW 620-3NM — Precision balance with tuning‑fork system and 620 g capacity The KERN EW 620-3NM is a precision balance designed for laboratory and industrial applications, combining a robust tuning‑fork weighing mechanism with high resolution for fine sample determination. Robust tuning-fork weighing system Readability 0.001 g for fine measurements Stainless-steel weighing pan, Ø 118 mm Wind shield and protective cover included Short settling time and stable temperature behaviour Accurate results where they matter most The KERN model delivers readability 0.001 g across a 620 g weighing range, making it suitable for precise determinations in analytical tasks and quality control. Its tuning‑fork system reduces susceptibility to mechanical drift and offers a consistently fast response, contributing to shorter cycle times in routine workflows. Linear behaviour is specified as ±0.003 g, while reproducibility is 0.001 g, providing an objective, traceable basis for documentation. These measurable specifications enable well-founded decisions when comparing balances or planning process tolerances. Practical features that improve daily handling A stainless-steel weighing pan (Ø 118 mm) and a factory‑supplied wind shield limit environmental influences and simplify sample handling. The unit includes a capacity bargraph that visualises remaining range and a counting function with minimum piece weights of 1 mg (lab mode) and 10 mg (normal mode), which supports repetitive counting tasks without changing instruments. The instrument’s compact dimensions and the included protective cover facilitate safe storage and clear bench organisation, reducing downtime between measurements. Designed for verification and robust performance Built-in CAL calibration program allows straightforward adjustment of the balance’s accuracy; external test weights can be used where formal verification is required (available at extra cost). The device demonstrates short settling times and stable temperature behaviour, ensuring consistent performance in environments between 10°C and 30°C and up to 80% relative humidity. High mechanical robustness and elevated corner-load safety minimise measurement errors due to off-centre loading, which supports reproducible results in daily laboratory operations. Proven application range and partner support This precision instrument is suitable for pharmacies, chemical production, gold and precious metal trade, cosmetics and general laboratory applications, where reliable small-mass determination is essential. For clients wishing to integrate the instrument into accredited workflows, Metav Werkzeuge provides technical advice and calibration services, including on-site calibration options via a qualified test service, ensuring conformity with internal and external quality requirements and reducing administrative effort. Contact Metav Werkzeuge for personalised advice on integrating the KERN EW 620-3NM into existing workflows, for calibration options and for assistance in selecting suitable test weights — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: EW.620-3NM Manufacturer: KERN GTIN: 4045761028883 Origin: JP Tariff number: 90160010 Facts Weighing range: 620 g Readability: 0.001 g Reproducibility: 0.001 g Linearity: ± 0.003 g Pan diameter: 118 mm Weighing chamber (W×D×H): 158×130×78 mm Display digit height: 17 mm Operating temperature: 10°C–30°C Max ambient humidity: 80% Power input: 220–240 V AC, 50 Hz Weight: 1.37 kg Battery charge time: 12 h Counting min. piece weight (lab): 1 mg; (normal): 10 mg Special features Weighing system: tuning‑fork Weighing plate: stainless steel Wind shield included Protective cover included CAL adjustment program Capacity bargraph display Short settling time High corner-load safety External test weights possible (extra cost) Typical applications: pharmacies, chemical industry, precious metals, cosmetics, laboratory use FAQ How precise is the balance for routine lab work? The KERN EW 620-3NM provides a readability of 0.001 g and a reproducibility of 0.001 g, suitable for fine analytical tasks and routine quality checks. Can the instrument be calibrated on site? Metav Werkzeuge offers on-site calibration services for the KERN EW 620-3NM through its authorised test service to support traceable verification. Is the weighing pan suitable for corrosive samples? The weighing pan is made from stainless steel, which provides resistance to common lab media; aggressive chemicals should still be handled with appropriate sampling procedures. What power options are available for the balance? The EW 620-3NM is supplied with a plug-in mains adapter for 220–240 V AC, 50 Hz; an optional battery is available for cordless operation. Which industries commonly use this balance? This precision balance is well suited for pharmacies, chemical processing, precious metal trade, cosmetics and general laboratory environments due to its combination of accuracy and durability. Metav Werkzeuge, Emmerich am Rhein, Germany · info@metav-werkzeuge.com · +49 2822 7131930
6200 g Precision Balance 0.01 g Readability 200×200 mm Stainless Steel Pan Stiffness Drive, 13 mm Display - KERN
Take advantage of the combination of high precision, robust stainless-steel construction and stable tuning-fork weighing for reliable results with heavy samples. Order the balance directly via Metav Werkzeuge or consult the technical advisors if additional specifications are required. KERN MPES.6200-2M Precision Balance — 6,200 g capacity, 0.01 g readability The KERN MPES.6200-2M is a precision balance designed for accurate weighing of heavy laboratory samples and industrial components, combining a large stainless-steel pan with a low-readability tuning-fork system. High precision 0.01 g readability 6,200 g capacity for heavy samples Stainless steel pan 200×200 mm Tuning-fork weighing system for stability Consistent accuracy that supports decision-making The balance delivers 0.01 g readability and reproducibility 0.01 g, producing reliably comparable results across repeated measurements. The instrument’s linearity ±0.03 g ensures small deviations are predictable, which reduces uncertainty in quality checks and inventory control. For laboratories and production lines that depend on traceable measurements, this level of precision helps to avoid costly rework and supports faster, evidence-based decisions. Built for heavier laboratory and workshop loads With a 6,200 g capacity and a 200×200 mm stainless steel weighing plate, the unit accommodates larger samples and small assemblies while keeping the weighing surface durable and easy to clean. The combination of a robust pan and a tuning-fork weighing system provides stable readings even when working with unevenly shaped items, making the instrument suitable for routine use in both lab benches and workshop environments. Simple operation and integration into workflows The instrument is powered by a standard 220–240 V AC, 50 Hz adapter (CH and EURO plugs included), with an optional battery and a charging time of 15 h for portable use. The 13 mm digit height on the display ensures results are legible at a glance, speeding up routine tasks. Clear numeric output and a compact footprint (220 × 333 × 93 mm) allow the balance to be positioned conveniently within existing workstations, reducing handling time and increasing throughput. Durable design with low-maintenance operation Constructed with a stainless-steel weighing surface and a tuning-fork mechanism, the balance minimises wear and reduces the frequency of service interventions. Operating specifications (10–30 °C and up to 80% relative humidity) match common laboratory environments, while the modest unit mass (4.34 kg) allows for repositioning when necessary. Confidence in long-term performance comes from a proven mechanical concept that balances sensitivity with robustness. Contact Metav Werkzeuge in Emmerich for tailored advice and supply: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical data Article number: PES SKU: MPES.6200-2M GTIN: 4045761076952 Manufacturer: KERN Country of origin: JP Customs tariff: 90160010 Core specifications Capacity: 6,200 g Readability: 0.01 g Linearity: ±0.03 g Reproducibility: 0.01 g Weighing plate: 200×200 mm Display digit height: 13 mm Unit weight: 4.34 kg Features & construction Weighing system: tuning-fork Weighing plate material: stainless steel Dimensions (W×D×H): 220×333×93 mm Power supply: 220–240 V AC, 50 Hz (plug-in adapter included CH; EURO) Battery: optional (charging time 15 h) Operating temperature range: 10–30 °C Max. ambient humidity: 80% Smallest piece weight (lab counting): 10 mg Smallest piece weight (normal counting): 100 mg FAQ What capacity and readability does the balance offer? The KERN MPES.6200-2M provides a 6,200 g capacity with 0.01 g readability, suitable for larger laboratory samples and precise small-mass determinations. Is the weighing surface suitable for industrial use? Yes, the unit features a stainless steel 200×200 mm weighing plate, making it robust and easy to clean for workshop and laboratory environments. Can the balance be used on battery power? An optional battery is available for portable operation; the charging time specified for the instrument is 15 hours. How stable are repeated measurements with this instrument? The balance offers reproducibility of 0.01 g and linearity ±0.03 g, providing stable, repeatable results for routine quality control and counting tasks. Which environments are suitable for operation? Normal operation is specified for 10–30 °C ambient temperature and up to 80% relative humidity, matching common lab and production-floor conditions. Manufacturer: KERN — Country of origin: JP — GTIN: 4045761076952 — SKU: MPES.6200-2M
6200 g Precision Balance 0.01 g Readability Graphic LCD 15 mm Display, Stainless Steel Pan 160 mm, IPXX? - KERN
Take advantage of precise high-resolution weighing and a broad 6,200 g capacity for reliable laboratory throughput; the clear graphic display and stainless-steel pan simplify handling and cleaning. Order the PLJ.6200-2AM directly via Metav Werkzeuge or ask our consultants for tailored advice. PLJ.6200-2AM Precision balance by KERN — 6,200 g capacity, 0.01 g readability The PLJ.6200-2AM is a precision balance designed for laboratory and quality-control applications, combining a wide 6,200 g range with fine 0.01 g resolution and a comfortable graphic display. High capacity 6,200 g range Fine readability 0.01 g Graphic LCD with 15 mm digits Stainless-steel pan Ø160 mm Reliable high-precision weighing for efficient workflows The balance delivers 0.01 g readability and reproducibility 0.01 g, enabling consistent results for serial measurements and quality checks. The force compensation weighing system maintains stability across the full range up to 6,200 g, reducing the need for repeated measurements and saving operator time. Linearity of ±0.03 g supports traceable results across the scale, so decisions based on measured values rest on a solid metrological foundation. Clear results and simple operation for everyday lab use A graphic LCD with 15 mm digit height presents measured values and menus with legible contrast, lowering the risk of misreads during busy shifts. The stainless-steel weighing plate with a diameter of 160 mm is durable and easy to clean, supporting hygienic routines. For piece-counting tasks the instrument offers minimum piece weights of 10 mg (laboratory) and 100 mg (standard), while the minimum sample weight is 0.5 g, allowing efficient inventory tasks and small-batch counts without excessive setup. Built to meet laboratory standards and environmental demands Certified as Class II, the balance supports verification workflows with a verification value of 0.1 g, meeting common regulatory requirements for many laboratories. The operating range of 15 °C–35 °C and maximum relative humidity of 80% ensure reliable performance in controlled environments. The unit includes a plug-in power supply compatible with AUS, CH, EURO, UK and US sockets and operates on 100 V–240 V, 50/60 Hz, making it adaptable for multi-site labs and international use. As a KERN instrument, it combines established manufacturing with straightforward handling for routine metrology tasks. Choose the KERN PLJ.6200-2AM for dependable high-resolution weighing and contact Metav Werkzeuge in Emmerich for personalised advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TPLJG-A SKU: PLJ.6200-2AM Manufacturer: KERN GTIN: 4045761243286 Origin: IT Warennummer: 90160010 eClass: 32120101 Key figures Weighing range max: 6,200 g Readability: 0.01 g Verification value: 0.1 g Minimum weight (min): 0.5 g Repeatability: 0.01 g Linearity: ±0.03 g Weighing pan diameter: 160 mm Display digit height: 15 mm Operating temperature: 15 °C–35 °C Max relative humidity: 80% Weight: 5.1 kg Power input: 100 V–240 V, 50/60 Hz Special features Weighing plate material: stainless steel Weighing system: force compensation Display type: Graphic LCD Approval class: Class II Power supply: Plug-in adapter for AUS; CH; EURO; UK; US Smallest piece weight (laboratory): 10 mg Smallest piece weight (normal): 100 mg FAQ What weighing capacity and resolution does the balance offer? The KERN PLJ.6200-2AM precision balance provides a maximum capacity of 6,200 g with a readability of 0.01 g for high-resolution laboratory tasks. Is the instrument suitable for piece counting and small parts? Yes — the PLJ.6200-2AM supports piece counting with minimum piece weights of 10 mg in laboratory mode and 100 mg in normal mode, and a minimum sample weight of 0.5 g for reliable counting workflows. Can the balance be used in standard laboratory conditions? The PLJ.6200-2AM operates reliably between 15 °C and 35 °C with up to 80% relative humidity; it also accepts 100 V–240 V, 50/60 Hz power, making it suitable for most laboratory environments. Does this model meet legal verification requirements? The instrument is Class II (eichklasse II) with a verification value of 0.1 g, which supports legally verifiable applications where this accuracy class is required. What are the main materials and user-facing features? The weighing plate is stainless steel with a 160 mm diameter and the display is a clear graphic LCD with 15 mm digits, designed for durability and easy reading during routine use. KERN — Origin: Italy; Address: not specified; Contact: not specified
6200 g Precision Balance 0.01 g Readability Graphic LCD, 160 mm Stainless Steel Pan, CAL, Recipe Memory - KERN
High-resolution weighing with a 0.01 g readability, broad 6,200 g capacity and an integrated recipe database delivers reliable, repeatable results for laboratory and quality-control workflows; order the unit via Metav Werkzeuge or consult our specialists for configuration and calibration options. PLS.6200-2A Precision balance by KERN — 6,200 g range, 0.01 g readability The PLS.6200-2A is a precision laboratory balance designed for research, jewellery testing and environmental analysis, combining a large weighing range with fine resolution and guided operation. 6,200 g capacity with 0.01 g readability Graphic LCD with 15 mm digit height Recipe database for up to 99 formulas Draft shield and CAL calibration programme included High-precision weighing for demanding workflows The balance offers 0.01 g readability across a 6,200 g capacity, using a force compensation weighing system that yields tight reproducibility and linearity. These technical characteristics translate directly into dependable measurement results: repeat measurements remain consistent thanks to a reproducibility of 0.01 g and linearity of ±0.03 g, making the instrument suitable for analytical tasks where traceable, high-resolution data are required. The stainless steel weighing pan (Ø 160 mm) provides a corrosion-resistant surface that is easy to clean, while the compact housing (210 × 345 × 100 mm) and a mass of 4.8 kg keep bench footprint and handling manageable. Streamlined dosing and recipe handling to save time A built-in recipe database stores up to 99 procedures with up to 20 components each, enabling straightforward repeat production of formulations and sample preparations. The graphic LCD with clear text prompts supports multilingual user guidance and simplifies operation for teams with varying language needs. A dedicated CAL programme allows controlled calibration routines, and the balance’s dosing aid with a high-stability mode improves the accuracy of manual additions. Together, these functions reduce process steps and the risk of transcription errors, improving throughput in laboratories and small production environments. Robust design and easy integration into laboratory setups The instrument is supplied with a draft shield to protect samples from air currents and to stabilise readings during fine measurements. Power is handled by a universal 100–240 V (50/60 Hz) adapter with country plugs included for AUS, CH, EURO, UK and US sockets, enabling immediate commissioning in a range of locations. Operating limits are straightforward: a recommended ambient temperature range of 15 °C–35 °C and a maximum relative humidity of 80% ensure stable performance when the balance is placed in a controlled workspace. The combination of compact dimensions and a 160 mm pan diameter supports both small-sample precision work and larger component weighing tasks. Quality assurance and readiness for regulated environments Traceability and repeatability are supported by the balance’s calibration features and clear measurement specifications. The PLS.6200-2A includes a work-protection hood and a clear minimum sample weight concept for compliance with pharmacopeial guidelines, aiding documentation of valid weighing practices. For laboratories seeking a reliable supply chain, Metav Werkzeuge acts as a quality filter for the European market, offering technical competence and logistics from Emmerich; this ensures consistent product quality and accessory availability, from external test weights to calibration services. For tailored advice on configuration, calibration options and delivery from Metav Werkzeuge in Emmerich, contact our consultants by email or phone to discuss the KERN PLS.6200-2A and available accessories Technical data Article number: TPLSG-A SKU: PLS.6200-2A GTIN: 4045761243330 Manufacturer: KERN Country of origin: CN Facts Weighing capacity: 6,200 g Readability: 0.01 g Reproducibility: 0.01 g Linearity: ±0.03 g Weighing pan diameter: 160 mm Display digit height: 15 mm Weight: 4.8 kg Dimensions (W×D×H): 210 × 345 × 100 mm Operating temperature: 15 °C–35 °C Max. ambient humidity: 80% Power supply: 100 V–240 V, 50 / 60 Hz Special features Graphic LCD with clear-text user guidance (DE, EN, FR, IT, ES, PT) Internal memory for complete recipes (up to 99 recipes × 20 components) Dosage aid with high-stability mode and selectable filters CAL calibration programme included Draft shield (work protection hood) supplied Stainless steel weighing pan Weighing system: force compensation Minimum piece weight for counting: 50 mg (laboratory) / 500 mg (normal) Suitable applications: laboratory work, research & development, jewellery and precious metal testing, environmental analysis, electronics industry FAQ How precise is the PLS.6200-2A for fine analytical tasks? The KERN PLS.6200-2A delivers 0.01 g readability, with reproducibility of 0.01 g and linearity of ±0.03 g, making it suitable for analytical and quality-control tasks that require high resolution and stable results. Can the balance store and recall formulation data? Yes — the unit features an internal recipe database that can save up to 99 recipes with up to 20 components each, enabling fast recall of formulations and standardised preparation steps. Is a calibration routine included with the balance? The balance provides a built-in CAL programme for calibration procedures; external test weights are available separately for verification and official calibration when traceability is required. Does the instrument include a draft shield for small samples? A work-protection draft shield is supplied with the balance to reduce air current effects and support stable readings, especially when weighing small sample masses. What power options are provided for international use? The balance is supplied with a universal 100–240 V power adapter and country-specific plugs for AUS, CH, EURO, UK and US, allowing immediate use in different regions. Which applications and materials are suitable for this balance? The instrument is designed for laboratory applications, research and development, jewellery and precious-metal testing, environmental analysis and electronics industry tasks where precise mass determination and recipe management are required. Manufacturer: KERN — Origin: CN — Distributor: Metav Werkzeuge, Emmerich — Contact: info@metav-werkzeuge.com, +49 2822 7131930
6200 g Precision Balance 0.01 g Readability Graphic LCD, Stainless Steel Pan 160 mm, Internal Calibration - KERN
Take advantage of the combination of high-capacity weighing, fine readability and integrated recipe management for reliable laboratory workflows. Order the balance directly via Metav Werkzeuge or consult our specialists for application-specific advice. KERN PLJ 6200-2A Precision Balance – 6,200 g capacity, 0.01 g readability The KERN PLJ 6200-2A is a precision balance designed for laboratory, R&D and quality-control applications, offering a large weighing range combined with a user-friendly graphic display for efficient sample handling. Precision 0.01 g readability Large 6,200 g weighing range Built-in recipe database and memory Internal calibration and stainless-steel pan Consistent, traceable results for demanding lab tasks The balance delivers precision across a wide working range thanks to a force compensation weighing system and a readability of 0.01 g, which ensures reliable determination of mass even for small sample changes. With a reproducibility of 0.01 g and linearity of ± 0.03 g, measurement uncertainty is reduced and documentation becomes easier to justify during audits. The stainless-steel weighing pan and robust construction support routine laboratory handling while the included draft shield protects readings from air currents and incidental disturbance. Streamlined workflows through recipe and display functions Efficient processing is supported by a clear graphic display and a programmable recipe database that stores up to 99 recipes with up to 20 components each, enabling repeatable dosing and formulation work. An internal memory holds complete recipes with names and target values, so operators switch between tasks without reprogramming. The dosaging aid, including high-stability mode and selectable filters, assists in faster attainment of target masses and reduces rework, which improves throughput in busy analytical or production labs. Built for reliability, calibration and flexible use An internal calibration routine maintains measurement accuracy independent of location or operator and reduces the need for frequent external adjustments. The balance accepts multiple plug types (AUS; CH; EURO; UK; US) for global deployment and operates within a typical laboratory temperature range. Compact dimensions and a weight of 4.9 kg make installation straightforward; regular calibration and the durable finish support long-term serviceability and predictable performance in regulated environments. Request tailored advice from Metav Werkzeuge in Emmerich to ensure the KERN PLJ 6200-2A fits the specific requirements of the laboratory and to arrange delivery or technical details Technical data Article number: TPLJG-A SKU: PLJ.6200-2A GTIN: 4045761243279 Manufacturer: KERN Origin: CN HS code: 90160010 Facts Weighing range: 6,200 g Readability: 0.01 g Reproducibility: 0.01 g Linearity: ± 0.03 g Pan diameter: 160 mm Housing dimensions: 210×340×100 mm Weight: 4.9 kg Operating temperature: 15 °C – 35 °C Max. ambient humidity: 80 % Display digit height: 15 mm Power input: 100 V – 240 V, 50 / 60 Hz Special features Weighing system: Force compensation Display type: Graphic LCD Weighing pan: Stainless-steel Internal calibration Recipe database (up to 99 recipes, up to 20 components each) Internal memory for complete recipes User guidance in DE, EN, FR, IT, ES, PT Dosage aid: High-stability mode and selectable filters Supplied with draft shield Power adapters included: AUS; CH; EURO; UK; US FAQ What laboratory applications is this balance suited for? The KERN PLJ 6200-2A is suitable for laboratory analyses, research and development, jewellery and precious-metal testing, environmental analysis and electronic component weighing thanks to its large range and fine readability. How does internal calibration benefit routine use? Internal calibration in the KERN PLJ 6200-2A maintains accuracy without external weights on site, which simplifies compliance routines and reduces downtime between measurement sessions. How many recipes can be stored and how are they used? Up to 99 recipes with up to 20 components each can be stored in the unit’s internal memory; the PLJ 6200-2A uses these entries to guide dosing and to recall target masses for repeatable production processes. Is the balance protected against drafts and environmental influence? Yes, the KERN PLJ 6200-2A is supplied with a draft shield to protect readings from air movement, and selectable filters plus a high-stability mode help achieve stable results under varying conditions. Which power adapters are supplied with the device? The PLJ 6200-2A is supplied with plug adapters for AUS, CH, EURO, UK and US, allowing immediate use in different markets without additional accessories. Manufacturer: KERN · Origin: China · Seller: Metav Werkzeuge, Emmerich · Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930
6200 g Precision Balance 0.01 g Readability, Stainless Steel Pan 180×160 mm, Vibration‑Resistant Stemma‑Fork System - KERN
Take advantage of the combination of a robust tuning-fork weigh system, high precision with 0.01 g readability, and stable performance for regulated workflows — order the KERN EW 6200-2NM Precision balance directly via Metav Werkzeuge or ask our consultants if needed. KERN EW 6200-2NM Precision balance — 6,200 g capacity, 0.01 g readability The KERN EW 6200-2NM is a precision laboratory balance equipped with a robust tuning-fork weigh system, designed for pharmaceutical, chemical and precious-metal applications where repeatable accuracy and traceable results are required. 6,200 g capacity with 0.01 g readability Robust tuning-fork weigh system Stainless-steel weighing pan Short settling time and stable temperature Consistent precision for regulated processes The EW 6200-2NM provides reproducibility of 0.01 g and a linearity of ±0.03 g, delivering repeatable measurements appropriate for controlled environments. The instrument’s tuning-fork weigh system is inherently resistant to environmental disturbances compared with more delicate sensor types, which reduces drift and the need for frequent adjustments. This reliability supports audit trails and helps to maintain product quality when used in laboratories or production-support roles. Fast results and adjustable calibration for operational efficiency A short settling time means more weighments per hour and less idle time at the bench, improving throughput in busy labs. The balance features a CAL adjustment program for internal calibration and accepts external test weights (available at extra cost) for traceable verification. The integrated capacity bargraph gives an immediate visual indication of remaining weighing range, helping to avoid overloads and to manage sample placement during routine tasks. Built to withstand daily laboratory use Mechanical robustness and high corner-load security ensure stable readings even when samples are not perfectly centred. The stainless-steel weighing pan (180×160 mm) resists corrosion and simplifies cleaning after handling aggressive media. The housing dimensions of 192×270×87 mm and a compact overall weight make the instrument straightforward to fit into existing workstations without compromising workspace ergonomics. Versatile function set for counting, summing and traceability The balance supports summation of counted parts and counting modes with a minimum single-part weight of 10 mg (laboratory counting) and 100 mg (standard counting), facilitating inventory and production tasks. An LCD display with 17 mm digit height offers clear readout; the instrument operates within 10°C–30°C and up to 80% relative humidity, matching typical laboratory ambient conditions. For battery-powered use a rechargeable option is available, with a 12 h charge time for portable workflows. Contact Metav Werkzeuge for tailored advice on integrating the KERN EW 6200-2NM into production or lab routines — Metav’s team in Emmerich am Rhein can advise on calibration options and suitability for specific applications (info@metav-werkzeuge.com | +49 2822 7131930) Technical data SKU: EW.6200-2NM Manufacturer: KERN GTIN: 4045761028906 Article number: EW-N Country of origin: JP Facts Capacity: 6,200 g Readability: 0.01 g Reproducibility: 0.01 g Linearity: ±0.03 g Weighing pan: 180×160 mm Housing dimensions: 192×270×87 mm Weight: 2.87 kg Operating temperature: 10°C–30°C Max. ambient humidity: 80% Display: LCD, digit height 17 mm Power supply: 220–240 V AC, 50 Hz Battery charge time: 12 h (battery optional) eClass: 32120101 HS code: 90160010 Special features Tuning-fork weigh system Stainless-steel weighing pan CAL adjustment program External test weights available (extra cost) Stable temperature behaviour Short settling time High mechanical robustness High corner-load security Capacity bargraph indicator Summation & counting functions Work protection hood (draft shield) included Mains adapters included: CH; EURO Suitable for: pharmacies; chemical industry; gold and precious-metal trade; cosmetics industry; laboratory applications FAQ What is the smallest increment the balance can display? The EW 6200-2NM displays increments of 0.01 g, allowing fine resolution for many laboratory and quality-control tasks. Is on-board calibration available, or are external weights required? A built-in CAL adjustment program is provided; for traceable verification external test weights can be used and are available at extra cost. Can the balance be used for piece counting? Yes — the instrument supports counting with a smallest single-part weight of 10 mg for laboratory counting and 100 mg for standard counting modes. What environmental conditions does the instrument require for accurate results? The balance is specified for use between 10°C and 30°C and up to 80% relative humidity; stable ambient conditions support best performance. Is the weighing pan material suitable for routine cleaning and corrosive samples? The stainless-steel weighing pan resists corrosion and is easy to clean, making it suitable for routine laboratory maintenance and many sample types. Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271
620g Precision Balance For Heavy Samples 0.001g Readability 140×120mm Stainless Steel Pan Stigmatic System - KERN
Take advantage of 620 g capacity, 0.001 g readability and proven tuning-fork technology for reliable laboratory weighing. Benefit from robust stainless-steel construction and flexible power options—order directly via Metav Werkzeuge or ask our consultants for tailored advice. MPES.620-3M Precision balance by KERN — 620 g capacity, 0.001 g readability A precision balance designed for heavier laboratory samples that combines high resolution with a compact footprint, ideal for routine analysis and quality control tasks High-resolution 0.001 g readability 620 g maximum capacity for heavier samples Stainless-steel weighing plate, 140×120 mm Battery operation optional for mobile use Consistent accuracy that supports lab workflows The MPES.620-3M delivers repeatable results through a tuning-fork weighing system that stabilises readings quickly and reduces susceptibility to environmental vibration. With a readability of 0.001 g, reproducibility of 0.001 g and linearity ±0.003 g, assessments meet tight tolerance requirements typical in analytical and QC environments. For teams less familiar with balance technology, tuning-fork systems translate into a practical benefit: faster stabilisation means more throughput and fewer retakes, helping to maintain steady sample throughput without compromising data integrity. Built for everyday robustness and straightforward handling A rectangular stainless-steel weighing plate (140×120 mm) provides a durable contact surface that resists corrosion and is simple to clean, supporting hygienic procedures and long service life. The instrument’s compact housing (220×330×90 mm) and modest weight (3.6 kg) make it easy to relocate within a lab or workbench. The bright display with 14 mm digit height ensures clear readability of measurements, reducing operator error during busy routines. The balance is supplied with a plug-in power adaptor (CH; EURO) and is designed for standard mains voltage (220–240 V AC, 50 Hz). Flexible power and environmental specifications for reliable operation For situations requiring mobility or where mains access is limited, an optional battery is supported; the available charging cycle is 15 h, offering an alternative power mode for temporary use. Environmental operating limits—10 °C to 30 °C and up to 80% relative humidity—are consistent with typical laboratory environments; keeping the instrument within these ranges preserves calibration stability and measurement performance. The design emphasises practical deployment: a clear weighing area, precise electronics and documented performance figures aid in complying with internal quality procedures. Contact Metav Werkzeuge in Emmerich for personalised advice on integrating the KERN MPES.620-3M into measurement workflows or to arrange supply directly from our European stock. Technical data SKU: MPES.620-3M Manufacturer: KERN GTIN: 4045761086340 Origin: JP Facts Maximum capacity: 620 g Readability: 0.001 g Reproducibility: 0.001 g Linearity: ±0.003 g Weighing pan (rectangular): 140×120 mm Housing dimensions: 220×330×90 mm Weight: 3.6 kg Display digit height: 14 mm Operating temperature: 10 °C–30 °C Supply: 220 V–240 V AC, 50 Hz Maximum ambient humidity: 80% Battery charge time (where fitted): 15 h Special features Weighing system: tuning-fork Weighing plate material: stainless steel Battery: optional Power adaptor included: CH; EURO Category: Laboratory scales eCl@ss: 32120101 Commodity code: 90160010 FAQ What level of resolution can be expected for analytical tasks? The KERN MPES.620-3M offers a readability of 0.001 g and a reproducibility of 0.001 g, suitable for fine analytical work where milligram precision is required. Is the instrument suitable for counting small parts? Yes; for laboratory counting applications the MPES.620-3M specifies a minimum piece weight of 1 mg under laboratory conditions, and 10 mg for normal counting tasks. Can the balance be used away from mains power? An optional battery can be fitted for portable or temporary operation; the documented charging cycle is 15 h. How robust is the weighing surface for routine cleaning? The rectangular stainless-steel weighing plate (140×120 mm) resists corrosion and withstands routine cleaning, supporting hygienic workflows. What environmental conditions ensure stable performance? Stable performance is expected within 10 °C–30 °C and up to 80% relative humidity; adherence to these ranges helps maintain calibration and repeatability. Manufacturer: KERN — Origin: Japan. For local supply and sales contact Metav Werkzeuge, Emmerich: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271
620g Precision Balance For Heavy Samples 0.001g Readability Rectangular Stainless Steel Pan 140×120mm IP54 - KERN
Take advantage of the combination of 620 g capacity, 0.001 g readability and a robust stainless-steel pan for reliable laboratory throughput; order directly via Metav Werkzeuge or consult our experts for specification matching. Precision Balance MPEJ.620-3M — 620 g capacity, 0.001 g readability (KERN) The Precision Balance MPEJ.620-3M is a laboratory instrument designed for precise determination of heavier sample masses while maintaining sub-milligram stability, suitable for QC benches and research environments 0.001 g readability and reproducibility 620 g maximum weighing range Stainless-steel pan 140×120 mm, rectangular Tuning-fork weighing mechanism for stability 13 mm high-contrast display digits Consistent high-precision results for quality control The tuning-fork weighing mechanism combined with a readability of 0.001 g delivers consistent, repeatable measurements that support documented quality-control routines. Linearity of ±0.003 g and a reproducibility of 0.001 g mean less uncertainty when performing comparative analyses or batch checks. A declared minimum weight of 0.1 g protects result validity when weighing small portions, and the balance’s classification under Class I verification provides traceable operation where legal-for-trade accuracy is required. These characteristics reduce rework and speed decision-making in routine laboratory workflows. Robust design that endures daily workshop demands A stainless-steel weighing pan (140×120 mm) and a compact housing (220×333×93 mm) combine solidity with a small footprint for benches where space is at a premium. The instrument’s net weight of 4.3 kg means it is stable during operation yet portable between stations. The unit is engineered for operation in standard laboratory conditions (ambient 10°C–30°C, relative humidity up to 80%), and supplied with CH / EURO plug adapters for immediate use across European facilities. These construction choices minimise maintenance needs and preserve measurement integrity under frequent use. Efficient operation and clear readout to save time A 13 mm digit height on the backlit display ensures readings are visible across the bench, reducing errors when logging results. Piece-counting capability supports production sampling with a laboratory minimum piece weight of 1 mg (normal mode 10 mg), improving parts-count workflows. The device accepts mains supply 220–240 V AC, 50 Hz via a plug-in adapter for straightforward installation. The product design focuses on rapid stabilisation and clear numeric feedback so technicians spend less time waiting and more time on value-adding tasks. Contact Metav Werkzeuge for tailored advice on integrating the KERN Precision Balance MPEJ.620-3M into your process — direct dispatch from Emmerich with technical consultation available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: MPEJ.620-3M GTIN: 4045761086319 Manufacturer: KERN Origin: JP eClass: 32120101 HS Tariff: 90160010 Core specifications Weighing range max: 620 g Readability: 0.001 g Minimum weight: 0.1 g Linearity: ± 0.003 g Reproducibility: 0.001 g Weighing pan: 140×120 mm (rectangular) Display digit height: 13 mm Weighing system: tuning-fork principle Housing dimensions: 220×333×93 mm Net weight: 4.3 kg Features and operating conditions Verification class: I Smallest piece weight (counting, lab): 1 mg Smallest piece weight (counting, normal): 10 mg Operating temperature: 10°C–30°C Max ambient humidity: 80% Power input: 220 V–240 V AC, 50 Hz Power supply: plug-in adapter (CH; EURO) FAQ How precise is the balance for small-sample work? The KERN Precision Balance MPEJ.620-3M offers a readability of 0.001 g, with reproducibility at 0.001 g and linearity of ±0.003 g, supporting accurate small-sample analyses in laboratory settings. Can the instrument be used for piece counting in production sampling? Yes, the device includes piece-counting functionality; the MPEJ.620-3M supports a laboratory minimum piece weight of 1 mg and normal-mode counting from 10 mg, making it suitable for sample-based counting tasks. What conditions are required for reliable operation? Stable operation is achieved within 10°C–30°C ambient temperature and up to 80% relative humidity; the tuning-fork mechanism and recommended environment preserve accuracy and reduce drift. Is the weighing pan suitable for routine cleaning and chemical exposure? The balance features a stainless-steel weighing pan (140×120 mm), offering corrosion resistance and simple cleaning procedures appropriate for typical laboratory reagents. What power connections are supplied with the balance? The unit is supplied with a plug-in adapter compatible with CH and EURO sockets and operates on 220–240 V AC, 50 Hz, facilitating rapid installation in European labs. Manufacturer: KERN — Origin: Japan — Distributor contact: info@metav-werkzeuge.com | +49 2822 7131930
620g Precision Balance With 0.001g Readability, 140mm Stainless Steel Pan, Fork Weighing System, LCD Display - KERN
Reliable laboratory weighing with 0.001 g readability and a 620 g capacity delivers precise, repeatable results for demanding workflows; the robust tuning-fork weighing system enables fast stabilisation and low drift. Order the KERN MPNS.600-3 directly via Metav Werkzeuge or contact our consultants for tailored advice and delivery from Emmerich. MPNS.600-3 precision balance by KERN — 620 g range, 0.001 g readability The MPNS.600-3 is a precision laboratory balance with a robust tuning-fork weighing system, designed for accurate weighing and piece counting in research and quality-control environments. 0.001 g readability 620 g maximum capacity Tuning-fork weighing system Stainless steel pan 140 mm Faster, measurable confidence in every measurement The instrument combines a high readability of 0.001 g with reproducibility 0.001 g, giving a quantifiable basis for process decisions and documentation. Because the balance uses a tuning-fork weighing system, stabilisation times are reduced and measurement noise is minimised, which translates into more samples processed per shift and fewer repeated cycles. Technical values such as linearity ±0.004 g and a clearly legible LCD with a 16.5 mm digit height support traceable procedures and easy visual verification of results. Reliable results that support quality workflows Built for routine laboratory use, the balance offers a stainless steel weighing pan with a 140 mm diameter that withstands cleaning and chemical exposure typical in labs. The unit’s reproducibility and low linearity error reduce uncertainty in weighing results, which assists in meeting internal QA thresholds and external audit requirements. Operating limits of 5 °C – 40 °C and up to 80% relative humidity define the environmental range where the instrument maintains specified performance, helping to plan placement and ambient control in production or testing areas. Practical connectivity and handling for everyday use Weighting is displayed on an easy-to-read LCD and the instrument is powered by a supplied plug-in adaptor with country-specific plugs (CH, EURO, UK, US), enabling rapid installation across international sites. With compact dimensions of 196 × 293 × 266 mm and a net weight of 2.09 kg, the unit is transportable between benches or workstations without complex mounting. The balance also supports reliable piece-counting workflows, with minimum part weights for laboratory counting down to 1 mg and standard counting from 10 mg, offering versatility for component inspection and procurement verification. For personalised guidance on integrating KERN precision balances into your workflow, contact Metav Werkzeuge in Emmerich for expert consultation and dependable supply — email info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical Data Article number: MPNS.600-3 SKU: MPNS.600-3 Manufacturer: KERN GTIN: 4045761183995 Customs tariff number: 90160010 Origin country: CN Facts Readability: 0.001 g Maximum weighing range: 620 g Reproducibility: 0.001 g Linearity: ± 0.004 g Display digit height: 16.5 mm Weighing pan diameter: 140 mm Minimum piece weight (lab counting): 1 mg Minimum piece weight (standard counting): 10 mg Operating temperature: 5 °C – 40 °C Max ambient humidity: 80% Power input: 220 V – 240 V AC, 50 Hz Net weight: 2.09 kg Dimensions (W × D × H): 196 × 293 × 266 mm Special features Weighing system: tuning-fork Weighing pan material: stainless steel Display type: LCD Power supply type: plug-in adaptor Included adaptors: CH, EURO, UK, US Category: laboratory balance FAQ What is the smallest readable increment and how reliable is it? The balance offers a readability of 0.001 g and reproducibility of 0.001 g, which supports precise measurements and consistent repeatability for laboratory tasks with the MPNS.600-3. Can this balance be used for piece counting of very small components? Yes, piece counting is supported; the MPNS.600-3 has a minimum piece weight for laboratory counting of 1 mg and typical counting from 10 mg, making it suitable for small-component inventory checks and inspection. Which power options are included for international use? A plug-in power adaptor is supplied with country-specific plugs for CH, EURO, UK and US, allowing immediate use in different regions without additional accessories. What environmental conditions are required for accurate results? Stable operation is specified for 5 °C – 40 °C and up to 80% relative humidity; keeping the balance within these limits helps maintain the stated linearity and reproducibility. Manufacturer: KERN — Origin: China; Supplier contact: Metav Werkzeuge, Emmerich am Rhein — info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271
620g Precision Balance With 0.001g Readability, Stainless Steel Pan, Glass Draft Shield, Internal Calibration - KERN
Benefit from the combination of a robust tuning-fork weighing system, 0.001 g resolution and automatic internal adjustment for consistent, traceable results in the lab. Order the KERN PNJ 600-3M directly via Metav Werkzeuge or consult our specialists for tailored advice. KERN PNJ 600-3M — Precision balance with 620 g capacity and 0.001 g readability The KERN PNJ 600-3M is a laboratory precision balance featuring a sturdy tuning-fork weighing mechanism, designed for exact dosing, piece counting and applications that require legal-for-trade verification High resolution 0.001 g Robust tuning-fork weighing system Internal automatic adjustment Large 3-slide glass draft shield Accurate results through a stable weighing principle The instrument uses a tuning-fork weighing system, which provides fast responses and excellent mechanical robustness compared with conventional load-cell designs. This results in stable measurements and a high resolution of 0.001 g, making the device suitable for precise dosing and quality-control tasks. Repeatability of 0.001 g and a linearity of ±0.004 g ensure consistent reading behaviour, while the integrated internal automatic adjustment neutralises small environmental drifts to maintain measurement integrity over time. Designed for practical laboratory workflows A clear LCD display with 16.5 mm digit height and a visual capacity bargraph make reading and process control straightforward, while the compact housing (196 × 293 × 266 mm) fits tight bench spaces. The stainless-steel weighing pan and a large glass windscreen with three sliding doors provide both durability and easy access to samples, reducing handling time and contamination risk. The instrument’s weighing chamber (172 × 171 × 160 mm) and a pan diameter of 140 mm support a broad range of sample types without occupying excessive bench space. Enhanced functionality for counting and efficiency For inventory and assembly tasks, the built-in counting function offers automatic reference optimisation to improve the average part-weight calculation, lowering handling time for piece-count routines. The visible capacity indicator allows operators to remain within the usable weighing range, preventing overloads and minimising rework. With adapters for CH, EURO, UK and US mains included, the unit integrates quickly into international lab environments and production areas. Compliance, calibration and workplace suitability The device is available in a configuration suitable for legal-for-trade use; verification (conformity assessment) under NAWI 2014/31/EU must be ordered at the point of purchase and requires the full installation address for registration. A protective work hood is supplied and humidity operation is rated up to 80%, while the operating temperature range is 5 °C to 40 °C, ensuring dependable performance within typical laboratory conditions. These features support traceable measurement processes and contribute to reproducible quality control. For precise laboratory weighing with KERN’s reliable tuning-fork system, contact Metav Werkzeuge for ordering and expert advice via info@metav-werkzeuge.com or by phone at +49 2822 7131930 — our team in Emmerich is ready to help with verification and configuration details. Technical Data Article number: PNJ.600-3M Manufacturer: KERN GTIN: 4045761179882 Country of origin: CN Commodity code: 90160010 Facts Weighing range: 620 g Readability: 0.001 g Repeatability: 0.001 g Linearity: ±0.004 g Minimum weight: 0.02 g Smallest piece weight (counting, lab): 1 mg Smallest piece weight (counting, normal): 10 mg Weighing pan diameter: 140 mm Weighing chamber (W×D×H): 172×171×160 mm Housing dimensions: 196×293×266 mm Net weight: 4.17 kg Display type: LCD, digit height 16.5 mm Operating temperature: 5 °C to 40 °C Max ambient humidity: 80 % Power supply: 220 V – 240 V AC, 50 Hz Mains adapters included: CH; EURO; UK; US Special features Weighing system: tuning-fork Internal automatic adjustment Large glass windscreen with three sliding doors Stainless-steel weighing pan Capacity bargraph display Accurate counting with automatic reference optimisation Work protection hood included Suitable for legal-for-trade applications (verification available) Compact bench footprint for limited spaces FAQ How precise is the balance for analytical tasks? The KERN PNJ 600-3M delivers a readability of 0.001 g with repeatability of 0.001 g, providing the precision required for fine dosing and analytical quality checks. Can the instrument be used for legal-for-trade measurements? Yes, the device can be configured for legal-for-trade use; however, the verification under NAWI 2014/31/EU must be ordered at the time of purchase and requires the full installation address. What advantages does the tuning-fork weighing system offer? The tuning-fork weighing system used in this precision balance offers rapid stabilisation, robust mechanical behaviour and reliable performance in routine laboratory and production environments. Is the balance suitable for piece counting in a production environment? The built-in counting function with automatic reference optimisation on the KERN PNJ 600-3M improves average part-weight calculation and reduces handling time for counting tasks. What environmental conditions are required for optimal performance? Optimal operation is within 5 °C to 40 °C and up to 80% relative humidity; the internal automatic adjustment helps maintain accuracy under normal laboratory conditions. KERN — Address: not provided — Contact: not provided
620g Precision Laboratory Balance Single-Cell, 0.001g Readability, Stainless Steel Pan, Multifunctional - KERN
Combine 0.001 g readability with a 620 g capacity and a compact footprint for dependable laboratory weighing; the robust Single‑Cell system and stainless steel pan ensure consistent linearity and reproducibility. Order the MPBS.620-3M directly via Metav Werkzeuge or ask our consultants if needed. MPBS.620-3M Laboratory Balance — Single‑Cell system, 620 g capacity (KERN) The MPBS.620-3M is a laboratory balance with a single‑cell weighing system, designed for precise routine weighing, reliable piece counting and compact integration in labs and workshops. High precision readability 0.001 g 620 g capacity with ±0.002 g linearity Stainless steel weighing pan 108×105 mm Clear LCD display with 14 mm digits Consistent accuracy for routine and critical tasks The balance delivers 0.001 g readability and a linearity of ±0.002 g, providing consistent results for dosing, sample preparation and quality checks. The Single‑Cell weighing system concentrates the load path, which contributes to uniform responses across the weighing range and supports the stated reproducibility 0.001 g. These measurable properties make the instrument suitable for laboratories and production environments that require repeatable, verifiable readings. Space‑saving design that integrates with workflows With an overall footprint of 209×322×78 mm and a weigh pan of 108×105 mm, the unit fits small benches while still allowing comfortable handling of samples. The stainless steel pan resists contamination and is easy to clean, reducing downtime between tasks. The compact construction and a net weight of 3.1 kg facilitate repositioning and use in shared workspaces without compromising stability or performance. Practical functions that speed up daily processes Equipped with an LCD display featuring 14 mm digit height, the readout is legible in typical laboratory lighting and speeds decision making. The balance supports piece counting with a smallest piece weight of 1 mg in lab mode (10 mg in normal mode), allowing both accurate quantity checks and bulk parts counting. Multiple international power adapters (CH, EU, UK, US) are included for straightforward setup in global environments. Operational reliability and measurement transparency Operating conditions of 10°C–30°C and maximum ambient humidity of 80% are specified for stable results; adherence to these limits helps protect long‑term performance. The supplied external adapter (220–240 V AC, 50 Hz) and the documented specifications such as GTIN 4045761094437 and ETIM EC002508 support traceability and procurement processes. The combination of clear technical parameters and robust construction fosters trust in routine measurements. Choose the KERN MPBS.620-3M for precise, repeatable weighing and contact Metav Werkzeuge in Emmerich for tailored advice, stock details and ordering via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: MPBS.620-3M Manufacturer: KERN GTIN: 4045761094437 Commodity code: 90160010 eClass: 32120101 ETIM: EC002508 Country of origin: PH Facts Capacity: 620 g Readability: 0.001 g Linearity: ± 0.002 g Reproducibility: 0.001 g Weighing pan: 108×105 mm Overall dimensions: 209×322×78 mm Display digit height: 14 mm Operating temperature: 10°C–30°C Max ambient humidity: 80% Weight: 3.1 kg Input voltage: 220 V–240 V AC, 50 Hz Special features Single‑Cell weighing system Stainless steel weighing pan LCD display Multifunctional operation Power adapters included: CH, EU, UK, US Piece counting: smallest piece weight 1 mg (lab) / 10 mg (normal) Suitable for laboratory and light production use FAQ What is the smallest weight increment the balance can display? The MPBS.620-3M displays increments down to 0.001 g, enabling fine measurement steps for analytical tasks. Which maximum load can be weighed on this device? Maximum capacity is 620 g, with a specified linearity of ±0.002 g across the range. Is the weighing surface suitable for regular cleaning and laboratory use? Yes, the stainless steel weighing pan (108×105 mm) on the MPBS.620-3M is designed for easy cleaning and routine laboratory handling. Does the device support piece counting and what are the limits? The MPBS.620-3M supports piece counting; the smallest piece weight for counting is 1 mg in lab mode and 10 mg in normal mode. What power supply and adapters are supplied with the balance? A plug‑in power supply (220–240 V AC, 50 Hz) is supplied with adapters for CH, EU, UK and US. KERN; Product origin: Philippines; Metav Werkzeuge — Emmerich am Rhein; Email: info@metav-werkzeuge.com; Tel: +49 2822 7131930
720 g Precision Balance 0.001 g Readability Graphic LCD, Stainless Steel Pan Ø110 mm, CAL Routine - KERN
Benefit from the combination of high resolution, robust construction and efficient workflow features for reliable laboratory weighing. Choose the KERN PLS 720-3A for consistent results and simple integration into lab processes; order via Metav Werkzeuge or request consultancy for calibration and setup. KERN PLS 720-3A Precision Balance — 720 g range, 0.001 g resolution The KERN PLS 720-3A is a laboratory precision balance designed for research, development and precious-metal testing, offering a large weighing range combined with high resolution and a user-friendly graphic display. High resolution 0.001 g readability Graphic LCD with 15 mm digits Generous 720 g weighing range Stainless steel pan Ø110 mm Consistent accuracy for exact results The balance employs a force compensation weighing system and delivers 0.001 g readability with a linearity of ±0.002 g, which supports reproducible measurements in sensitive analytical tasks. These specifications reduce measurement uncertainty and make the instrument suitable for applications that demand traceable results. The combination of repeatability and a wide weighing range ensures that small samples and heavier batches can be processed on a single instrument, lowering handling time and potential transfer errors. Streamlined dosing and recipe management Integrated recipe database functionality stores complete formulations—up to 99 recipes with 20 components each—allowing clear recipe names and target values to be recalled quickly. The graphic LCD with 15 mm digit height provides guided, plain-text operation in multiple languages, which accelerates routine tasks and reduces training time. Dosage support and selectable filter settings, including a high-stability mode, help achieve fast, stable readings during dispensing and mixing operations, improving throughput in production and laboratory workflows. Built for stable measurements and simple verification A ring-shaped windscreen and a draft-shielded weighing chamber (Ø×H 150×60 mm) are supplied as standard to protect sensitive readings from air currents. The instrument includes a CAL calibration program for routine accuracy adjustment; external test weights are available as an option for official verification. The weighing pan is stainless steel, providing chemical resistance and easy cleaning, while the protective cover is included to guard the instrument when not in use, supporting long-term reliability in busy environments. Suitability across laboratory and industrial tasks Designed for labs, R&D, environmental analysis and the electronics sector, the balance supports piece-counting tasks with minimum piece weights specified for high-precision and standard counting modes. The robust construction and clear user guidance make it suitable for jewellery and precious-metal testing as well as routine analytical work. Compact dimensions and a transport weight of 4.8 kg simplify repositioning between workstations or benches when required. Discuss supply, calibration options and delivery from Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange further technical details Technical Data Article number: TPLSG-A SKU: PLS.720-3A GTIN: 4045761243316 Manufacturer: KERN Country of origin: CN HS code: 90160010 Core specifications Weighing range: 720 g Readability: 0.001 g Reproducibility: 0.001 g Linearity: ±0.002 g Weighing pan diameter: 110 mm Display digit height: 15 mm Operating temperature: 15 °C–35 °C Max. ambient humidity: 80 % Net weight: 4.8 kg Power input: 100 V–240 V, 50/60 Hz Features & Materials Weighing plate material: stainless steel Weighing system: force compensation Draft shield: ring-shaped windscreen included Weighing chamber Ø×H: 150×60 mm Recipe storage: up to 99 recipes, 20 components each User interface: graphic LCD, multilingual (DE, EN, FR, IT, ES, PT) Calibration: CAL program; external test weights optional Accessories: protective cover included Power adapters included: AUS; CH; EURO; UK; US FAQ Is the balance suitable for precious-metal testing? The KERN PLS 720-3A is suitable for precious-metal testing thanks to its high resolution and stable weighing performance, enabling precise mass determination of small items and alloys. What does the minimum sample weight (USP) mean for this instrument? The US minimum sample weight (USP) is a guideline for the smallest permissible sample to meet a defined accuracy level; the PLS 720-3A's high readability reduces the required sample mass compared with lower-resolution balances. How is calibration performed on this balance? The balance features an internal CAL calibration routine for adjusting accuracy; for official certification, external test weights can be used in conjunction with the CAL program. Can this instrument be used for piece counting applications? Yes. Piece-counting is supported; the instrument specifies minimal piece weights for laboratory and standard counting modes, enabling reliable counting of small components when appropriate reference samples are used. Which power adapters are supplied? The instrument is supplied with adapters for AUS, CH, EURO, UK and US regions and accepts 100 V–240 V, 50/60 Hz input. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271
precision balances for milligram accuracy and larger samples
Precision balances are designed for exact measurement of larger samples in the milligram range, offering a balance between fine resolution and extended weighing capacity. Also referred to as precision scales or precision weighing instruments, they serve quality control, production and formulation tasks where both accuracy and throughput matter.
how they work and where they fit in the workflow
These precision balances combine a high-resolution load cell with a wider weighing range to measure samples that are too large for analytical balances yet still require milligram-level precision. Typical applications include routine quality control checks, batch formulation in production lines and incoming material inspections in trade and distribution. The instruments function by converting mechanical force into electrical signals that are processed to give stable, repeatable mass readings suitable for process control and documentation.
tangible benefits that improve daily production
- Faster, reliable measurements that reduce inspection cycle time and improve throughput
- Consistent milligram-level resolution across larger sample sizes, lowering rework and scrap rates
- Stable readings under normal workshop conditions, supporting reproducible formulation recipes
- Flexible application: suitable for laboratory tasks as well as industrial and commercial weighing needs
why Metav is the practical partner for your weighing needs
Metav stands for democratisation of precision. With a pragmatic supply hub in Emmerich and a catalogue exceeding 250,000 items, Metav combines decades of expertise with dependable logistics. Over 48,000 customers trust Metav’s selection and quality filter, making the Metav assortment the sensible choice for workshops and industrial procurement seeking reliable precision balances and precision scales.
technical data at a glance
- measurement resolution: milligram range
- weighing capacity: larger weighing ranges (suitable for bigger samples)
- typical applications: quality control, production, formulation
- suitable environments: laboratory, industry, trade
summary: precise, flexible weighing for production and lab use
Precision balances deliver milligram-level accuracy with extended capacity, making them a flexible solution for laboratory, industrial and commercial weighing tasks where both precision and sample size matter.
FAQ
What is the main difference between precision balances and analytical balances?
Precision balances provide milligram-level resolution across larger weighing ranges, whereas analytical balances are optimised for microgram resolution with smaller maximum capacities. Use a precision balance when sample size or throughput requires greater capacity without sacrificing fine accuracy.
Can precision balances be used on the production floor?
Yes. Precision balances are suitable for production environments and are designed to deliver stable readings for quality control and formulation tasks in industrial settings.
Which industries benefit most from precision balances?
Precision balances are commonly used in manufacturing quality control, chemical and pharmaceutical formulation, and trade departments that require reliable mass measurements of larger samples.
How do precision balances support reproducible formulations?
By combining consistent milligram resolution with larger weighing ranges, precision balances ensure recipe components are measured accurately, reducing batch variability and improving product quality.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com