Precision balances for reliable, large-range milligram measurement
Precision balances and weighing systems provide accurate milligram-level results across larger capacity ranges, delivering consistent measurements for quality control, production and formulation tasks. They serve laboratories, industry and trade by combining high accuracy with extended weighing ranges to improve throughput and traceability. Typical uses include sample analysis, batch formulation and incoming material checks, where precision, repeatability and capacity are critical performance criteria.
100 g Precision Laboratory Balance 0.001 g Readability, 81 mm Pan, LCD, Rechargeable Battery Option - KERN
Take advantage of high precision and compact design combined with reliable power options for consistent weighing results; order the balance directly via Metav Werkzeuge or consult our specialists for application advice. KERN PCB.100-3 Laboratory Balance — 100 g capacity, 0.001 g readability A compact KERN PCB.100-3 laboratory balance designed for accurate weighing and small-parts counting in laboratories and workshops. 100 g capacity, 0.001 g readability Antistatic plastic weighing pan 81 mm Clear 15 mm LCD digits Mains adapter and 9 V battery operation Precision that supports reliable decisions The balance delivers 0.001 g readability and ±0.003 g linearity, ensuring measurements can be relied on for quality control and sample preparation. The instrument uses a strain gauge weighing system, which converts force into a stable electrical signal; this method minimises drift and supports reproducible results with a repeatability of 0.001 g. Such technical performance reduces rework and accelerates decision-making in production and laboratory environments, making the device suitable where traceable, repeatable weighing matters. Compact layout for flexible use and quick setup A compact footprint (163 × 245 × 79 mm) and a conductive-coated plastic pan with an 81 mm diameter allow installation on crowded benches without sacrificing functionality. The LCD with 15 mm digits provides clear readouts even from a short distance, reducing reading errors. Power options include a mains adapter (100–240 V AC) with CH, EURO, UK and US plugs and a 9 V block battery with approximately 20 h runtime; battery charging requires about 8 h. Operating conditions are suited to typical indoor environments (5 °C–35 °C, max 80% relative humidity), which supports deployment across labs and shop floors. Practical performance for routine tasks Beyond basic weighing, the instrument supports piece counting with a smallest reference weight of 2 mg in laboratory mode and 20 mg in normal mode, enabling efficient inventory tasks and component checks. A wear-resistant, conductive pan simplifies handling of small or static-prone items. The combination of precision, compactness and portable power delivery enables a smoother workflow for sample preparation, component verification and routine quality checks, reducing handling time and improving throughput. Contact Metav Werkzeuge for tailored procurement from Emmerich — our consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss suitability and delivery options Technical data Article number: PCB SKU: PCB.100-3 GTIN: 4045761085404 Manufacturer: KERN Country of origin: CN Facts Maximum capacity: 100 g Readability: 0.001 g Repeatability: 0.001 g Linearity: ±0.003 g Weighing pan diameter: 81 mm Display digit height: 15 mm Weight: 1 kg Operating temperature: 5 °C–35 °C Max relative humidity: 80% Battery type: 9 V block Battery life: 20 h Battery charge time (if applicable): 8 h Input voltage (adapter): 100–240 V AC 50/60 Hz 0.5 A Special features Weighing system: strain gauge Weighing pan material: conductive-coated plastic Display type: LCD Power supply: mains adapter (CH; EURO; UK; US) and battery operation Piece counting: smallest piece weight 2 mg (lab); 20 mg (normal) Housing dimensions: 163 × 245 × 79 mm Category: Laboratory balances ECLASS: 32120101 ETIM: EC002508 Commodity code: 90160010 FAQ What is the smallest increment the balance can display? The balance displays increments of 0.001 g, enabling fine measurement resolution for laboratory tasks. Can the instrument be used without mains power? Yes. The unit accepts a 9 V block battery and offers approximately 20 h of operation when battery-powered. Is the weighing surface suitable for static-prone samples? The pan is made of conductive-coated plastic and is described as antistatic, supporting handling of static-sensitive items. KERN — Country of origin: CN
1000 g Precision Lab Balance 0.01 g Readability, 130×130 mm Stainless Steel Pan, DMS, IoT‑Ready - KERN
Benefit from laboratory-grade accuracy, flexible Industry 4.0 connectivity and a compact stainless-steel design that keeps workflows efficient and reliable; order the device directly via Metav Werkzeuge or contact our consultants for tailored advice. KERN PCB 1000-2 — Compact precision laboratory balance with IoT-ready connectivity and 0.01 g readability The KERN PCB 1000-2 is a compact precision laboratory balance designed for laboratory, educational and light industrial applications, offering strain-gauge accuracy and modular connectivity for modern data workflows IoT-ready KERN Universal Port (KUP) Readability 0.01 g for fine results Stainless-steel weighing plate 130×130 mm PRE-TARE and recipe function for efficient dosing Consistent accuracy that supports confident decisions The PCB 1000-2 uses a strain-gauge (DMS) weighing system to deliver a readability of 0.01 g and a reproducibility of 0.01 g, which together reduce measurement uncertainty when documenting small quantities. For users accustomed to analogue balances, the stated linearity of ±0.03 g explains how deviations remain minimal across the weighing range; this numeric performance translates into reliable lot checks, sample preparation and quality-control records. The compact construction and stainless-steel weighing plate ensure measurements remain stable even in busy workstations. Seamless data transfer and Industry 4.0 compatibility Connectivity is a core strength: the integrated KERN Universal Port (KUP) accepts plug-in adapters for RS-232, USB, Bluetooth, WLAN or Ethernet without opening the housing, enabling straightforward retrofitting and network integration. The KERN Communication Protocol (KCP) allows remote querying and control from laboratory software or PLCs, simplifying data capture and reducing transcription errors. These features support automated logging and traceable documentation, making the balance a practical choice where digital data exchange and process integration are priorities. Practical functions that speed routine tasks Built-in utilities focus on workflow efficiency: PRE-TARE enables quick subtraction of known container weights, while the recipe function accumulates component weights for mixtures and displays the total for verification. Checkweighing with a visual signal assists portioning and sorting, reducing rejects and accelerating packing operations. A dedicated anti-shock mount between the weighing plate and sensor dampens vibrations, so readings settle faster and handling time is reduced—benefits that increase throughput without sacrificing precision. Designed for laboratory environments and uninterrupted operation The instrument is supplied with a protective draft shield and a multi-plug mains adapter set (CH, EU, UK, US) for immediate deployment in international settings. Battery operation is possible using a 9 V block with a typical runtime of up to 20 hours, while the rechargeable option charges in about 8 hours when used. Operating conditions are kept simple—sensible ambient ranges and a compact form factor mean the unit can be stationed where it is needed, and the moderate weight supports portability between benches or classrooms. Discuss KERN’s IoT-ready PCB 1000-2 with Metav Werkzeuge to plan integration into existing workflows — contact our consultants at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 for personalised advice and supply options Technical data Article number: PCB.1000-2 SKU: PCB.1000-2 GTIN: 4045761086494 Manufacturer: KERN Core figures Weighing range: 1000 g Readability: 0.01 g Reproducibility: 0.01 g Linearity: ±0.03 g Weighing plate (rectangular): 130×130 mm Display digit height: 21 mm Weighing system: Strain-gauge (DMS) Weight (device): 1.25 kg Battery: 9 V block; battery runtime 20 h; battery charging time 8 h Supply: 100–240 V AC 50/60 Hz 0.5 A (plug-in mains adapter CH, EU, UK, US) Operating temperature: 5 °C–35 °C Max ambient humidity: 80 % Special features IoT-ready KERN Universal Port (KUP) for modular adapters KERN Communication Protocol (KCP) for remote control and query PRE-TARE and recipe function for mixture weighing Checkweighing with optical signal for portioning and sorting Anti-shock system between plate and sensor for faster stabilisation Stainless-steel weighing plate Draft shield included Compatible with KERN EasyTouch software On-site calibration service available FAQ How precise is the balance for small samples? The KERN PCB 1000-2 achieves a readability of 0.01 g and a reproducibility of 0.01 g, making it suitable for precise sample preparation and fine dosing tasks. Can the balance be connected to laboratory software or a network? Yes. The KUP interface accepts adapters for USB, RS-232, Bluetooth, WLAN or Ethernet and the unit supports the KERN Communication Protocol (KCP) for remote query and control. Is battery operation possible for portable use? The device accepts a 9 V block battery with an approximate runtime of 20 hours; a rechargeable option is available and recharging takes about 8 hours. What practical functions speed up weighing procedures? Features such as PRE-TARE, the recipe function and a visual checkweighing signal support fast container tare, component accumulation and accurate portioning. Where is the device most suitable to use? The compact design and performance make it suitable for laboratory work, education, research and light industrial weighing where traceable digital data and reliable small-quantity accuracy are needed. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930 — WhatsApp +49 170 2837271
1000 g Precision Laboratory Balance 0.1 g Readability, 130×130 mm Stainless Steel Pan, DMS System - KERN
Take advantage of compact dimensions, precise 0.1 g readability and an integrated draft shield for dependable daily weighing; order the balance via Metav Werkzeuge or consult our specialists for technical advice. KERN 440-45N – compact precision balance, 1,000 g / 0.1 g readability KERN 440-45N is a compact precision balance for laboratory and routine weighing tasks, suitable where space is limited and reliable results are required Compact footprint for small benches 0.1 g readability for repeatable results Percent function for formulation and comparison Draft shield included for reproducibility Precision where space is limited The compact design delivers professional weighing performance in a small enclosure, making this instrument ideal for crowded benches. The balance features 0.1 g readability across a maximum capacity of 1,000 g, ensuring that both small and moderate loads are recorded with high resolution. The strain-gauge measuring principle (DMS) provides stable signals and low drift; explained simply, this means consistent readings during extended cycles and minimal need for frequent adjustments. Linearity of ±0.2 g and a reproducibility of 0.1 g underpin reliable data for documentation and quality control. Make routine tasks faster and more reproducible Integrated functions support everyday laboratory workflows: the percent function allows users to set a reference (100 %) and immediately identify deviations, which streamlines formulation, dosing and comparative checks. A supplied draft shield reduces air disturbance around the pan for more reproducible results with small samples. The stainless steel weighing pan (130×130 mm) is robust and easy to clean, reducing downtime between measurements and supporting traceable processes in regulated environments. Designed for flexible workplaces Power options and accessories suit mobile and fixed setups alike. The instrument accepts a mains adaptor (supplied with CH, EU, UK and US plugs) and runs on a 9 V block battery for portable use, with a typical battery life of 20 h for field tasks. The compact housing (165×230×80 mm) and low shipping weight (approx. 1.1 kg) make the unit easily repositionable. Operating conditions are typical for laboratory equipment, with an ambient temperature range of 5°C–35°C and a maximum relative humidity of 80 %, allowing use in standard lab and workshop environments. Practical accuracy for counting and analysis For piece counting and minimum-sample applications the balance provides defined limits: a minimum sample weight for USP considerations and counting thresholds adapted to laboratory and normal counting modes. The device’s clear LCD with 15 mm digit height supports quick reading of results, while the strain-gauge system minimises maintenance compared with more sensitive sensor technologies. Together, these attributes allow dependable everyday measurement and support efficient quality assurance processes without complex calibration procedures on a daily basis. For precise bench weighing and tailored advice, contact Metav Werkzeuge to discuss supply and technical specifications via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 440 SKU: 440-45N GTIN: 4045761013032 Manufacturer: KERN Country of origin: CN Core specifications Weighing range: 1,000 g Readability: 0.1 g Reproducibility: 0.1 g Linearity: ±0.2 g Weighing pan: 130×130 mm Display: LCD, digit height 15 mm Power: 100–240 V AC 50/60 Hz 0.5 A; battery operation via 9 V block Battery life: 20 h Dimensions (W×D×H): 165×230×80 mm Weight: 1.1 kg Operating temperature: 5°C–35°C Max. ambient humidity: 80 % Additional features Weighing system: strain-gauge (DMS) Material: stainless steel weighing pan Percent determination function included Draft shield supplied Minimum sample weight for USP guidance provided Adaptor plugs included: CH, EU, UK, US FAQ What is the maximum capacity and readability of this balance? The KERN 440-45N precision balance has a maximum capacity of 1,000 g with a readability of 0.1 g, suitable for routine laboratory use. Is a draft shield included and why is it important? Yes, a draft shield is supplied; the shield reduces air disturbance around the pan, improving repeatability for small or light samples. Can the balance be used on battery power for mobile tasks? The instrument accepts a 9 V block battery and provides around 20 h of operation, so the balance is suitable for temporary portable use without mains power. Does the balance offer functions for formulations or comparative weighing? The percent determination feature allows setting a reference value (100 %) and quickly measuring deviations, which supports formulation and comparative checks in production or lab routines. What connections and adaptors are supplied for international use? The balance includes a mains adaptor with CH, EU, UK and US plugs for broad compatibility in different regions. KERN; Origin: China; Distributor: Metav Werkzeuge — info@metav-werkzeuge.com, +49 2822 7131930
1000 g Precision Laboratory Balance 0.1 g Readability, 130×130 mm Stainless Steel Pan, LCD Display - KERN
Take advantage of the combination of 0.1 g readability, 1,000 g capacity and a compact stainless steel pan for reliable bench-top weighing; order the item directly via Metav Werkzeuge or consult our experts for specification matching and delivery from Emmerich. KERN PCB.1000-1 Compact Laboratory Balance — 1,000 g capacity, 0.1 g readability The KERN PCB.1000-1 is a compact laboratory balance designed for precise routine weighing and piece counting in small laboratories, workshops and quality-control benches. Precise readability 0.1 g 1,000 g maximum capacity Stainless steel pan 130×130 mm Portable operation with 9 V battery Consistent results that speed quality checks The balance delivers 0.1 g readability with ±0.2 g linearity and 0.1 g reproducibility, ensured by a sensitive strain gauge weighing system. This level of precision reduces measurement variation across repeated tests and supports reliable decision-making in production control. Where traceable consistency is required for formulation, sampling or quality checks, the instrument offers a measurable improvement in reproducibility and lowers the need for repeat measurements, saving time and reducing material waste. Small footprint, flexible placement and long runtime With overall dimensions of 165×250×79 mm and a net weight of 1.27 kg, the instrument fits on crowded workbenches and mobile test stations. The stainless steel weighing pan (130×130 mm) resists corrosion and is easy to clean, making it suitable for mixed-use environments. Power flexibility is provided by a 9 V block battery with up to 20 h battery life or by the included mains adapter (plugs for CH, EU, UK and US), enabling uninterrupted operation across locations without frequent reconfiguration. Clear readings and practical counting features for efficiency A clear LCD with 21 mm digit height improves legibility under varied lighting, reducing transcription errors during shifts. The instrument supports piece-counting workflows with smallest piece weights of 200 mg for laboratory counting and 2 g for standard counting, turning the balance into a practical tool for inventory tasks, sample preparation and small-part verification. Simple visual feedback and stable display behaviour contribute to faster throughput on routine tasks. Built for everyday durability and controlled environments Constructed with a stainless steel pan and a robust strain gauge mechanism, the unit withstands frequent use while maintaining calibration stability. Operating specifications (ambient 5°C–35°C, relative humidity up to 80%) align with common laboratory and workshop conditions; adherence to these limits supports consistent measurement outcomes. The compact design and included mains adapter simplify installation and reduce downtime for routine lab operations. Contact Metav Werkzeuge for tailored advice or to request the KERN PCB.1000-1 for prompt delivery from our Emmerich warehouse Technical data Article number: PCB SKU: PCB.1000-1 Manufacturer: KERN GTIN: 4045761084827 Country of origin: CN Tariff code: 84238129 Facts Maximum capacity: 1,000 g Readability: 0.1 g Reproducibility: 0.1 g Linearity: ±0.2 g Weighing pan: 130×130 mm (rectangular) Housing dimensions: 165×250×79 mm Net weight: 1.27 kg Display digit height: 21 mm Battery life: 20 h Battery type: 9 V block Battery charging time: 8 h Operating temperature: 5°C–35°C Max relative humidity: 80% Power input: 100–240 V AC, 50/60 Hz, 0.5 A Special features Weighing pan material: stainless steel Weighing system: strain gauge (load cell) Display type: LCD Mains adapter included (CH; EURO; UK; US) Optional battery operation available Suitable for piece counting (smallest piece weight: 200 mg / 2 g) Compact, portable design for bench-top use FAQ What is the smallest weight increment the balance can reliably display? The KERN PCB.1000-1 shows increments of 0.1 g, providing fine resolution for typical laboratory and workshop tasks. Can the instrument be used away from mains power? Yes. The balance accepts a 9 V block battery and achieves up to 20 h battery life, allowing portable operation without a permanent mains connection. Is the weighing surface resistant to chemicals and easy to clean? The stainless steel pan offers good chemical resistance for common cleaning agents and can be wiped down quickly to maintain hygiene and minimise cross-contamination. Does the unit support piece counting for inventory tasks? Counting functionality is supported; the smallest piece weight for laboratory counting is 200 mg and 2 g for standard counting modes, enabling reliable small-part tallies. What environmental conditions are required for accurate weighing? Stable operation is specified between 5°C and 35°C with up to 80% relative humidity; staying within these ranges helps preserve accuracy and stability. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271
10000 g Precision Balance With Removable Indicator 1 g Readability Stainless Steel Pan, DMS System - KERN
Take advantage of a high-resolution 1 g readability combined with a 10,000 g capacity and a removable indicator for flexible installation. The separate weighing platform and included draft shield ensure safe, contamination-controlled handling of sensitive substances. Order the unit directly via Metav Werkzeuge or consult our advisors for configuration and supply. KERN PCD 10K-3 – Precision laboratory balance with removable indicator and separate platform The KERN PCD 10K-3 is a precision laboratory balance with a detachable display module, designed for safe weighing under glove-bags or inside fume hoods in quality control, industrial or laboratory environments Separate platform for glove-bag or fume-hood use PRE-TARE function for controlled filling and checks Removable indicator for flexible mounting Stainless steel weighing pan for easy cleaning Highest accuracy and predictable performance for production control Built around a strain gauge load cell, this compact precision instrument delivers 1 g readability across a 10,000 g capacity, supporting reliable measurements for process monitoring and incoming inspection. The system specification of ±3 g linearity and 1 g reproducibility provides a clear, numerical basis for decision-making and reduces rework caused by uncertain weighing results. The large, easy-to-read LCD with 21 mm digit height improves visibility in busy workspaces, while the weighing mechanism and electronics are optimised for repeatable output—key for laboratories where traceable results are required. Safe handling and flexible installation for sensitive samples The model features a separate weighing platform, allowing the display to remain outside glove-bags or under fume hoods while the pan sits inside a controlled environment. This arrangement minimises contamination risk when working with toxic, volatile or sterile samples. The built-in PRE-TARE function simplifies manual pre-deduction of known container weights, aiding filling checks and batch controls. A stainless steel pan supports routine cleaning and corrosion resistance, and the removable display enhances layout flexibility on crowded benches. Practical operation and long runtimes for uninterrupted workflows Designed for practical lab use, the unit includes a spirit level and adjustable feet for precise levelling and therefore best measurement stability. Power options comprise a plug-in adapter (EU/UK/US/CH adapters included) and a standard 9 V block battery; an optional rechargeable battery is available to extend operational mobility. Typical battery runtime is around 12 hours, with a full recharge taking approximately 10 hours, enabling continued operation during shift changes or temporary power interruptions. The instrument’s programmable weighing unit capability (for example display in g/m or g/m²) supports tailored measurement readouts for production-relevant tasks. Contact Metav Werkzeuge in Emmerich for tailored advice, configuration options and reliable supply of the KERN PCD 10K-3 precision balance Technical data Article number: PCD SKU: PCD.10K-3 Manufacturer: KERN GTIN: 4045761192027 Origin: CN Facts Weighing range: 10,000 g Readability: 1 g Reproducibility: 1 g Linearity: ± 3 g Weighing pan (rectangular): 160×160 mm Weighing platform dimensions: 165×165×73 mm Housing dimensions (without removable parts): 165×280×75 mm Display digit height: 21 mm Power supply: 220 V - 240 V AC, 50 Hz Battery: 9 V block Battery runtime: 12 h Battery charging time: 10 h Operating temperature: 5 °C–35 °C Max ambient humidity: 80 % Net weight: 1.66 kg Harmonised system code: 84238129 Special features Separate platform for glove-bag and fume-hood applications PRE-TARE function for manual pre-deduction Free-programmable weighing unit (e.g., g/m, g/m²) Level vial and adjustable feet for precise levelling Work protection hood (draft shield) included Strain gauge load cell weighing system Stainless steel weighing pan Removable indicator for flexible mounting Mains adapters included: CH; EURO; UK; US Power supply type: plug-in adapter Optional rechargeable battery available Intended applications: Quality assurance, industrial use, laboratory FAQ What is the maximum capacity and readability of this balance? The KERN PCD 10K-3 offers a maximum capacity of 10,000 g with a readability of 1 g, suitable for a wide range of QC and laboratory tasks. Can the display be placed outside a glove-bag or fume hood? Yes, the removable indicator allows the weighing pan to remain inside the glove-bag or fume hood while the display is mounted externally for safe and convenient reading. Is the balance suitable for counting small parts? The unit supports piece-counting; the smallest reliable piece weight for laboratory counting is 2 g, while for normal counting tasks the minimum is 20 g. What power options are available for continuous operation? The KERN PCD 10K-3 can be powered from the supplied plug-in adapter (220–240 V) and runs on a 9 V block battery for portable use; an optional rechargeable battery is available for extended mobile operation. Does the balance include features for precision set-up and contamination control? Yes, the instrument provides a spirit level and adjustable feet for accurate levelling and includes a work protection hood for controlled sample handling and contamination reduction. Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271
10000 g Precision Caliper Weighing Scale 0.1 g Readability, Stainless Steel Pan 160×200 mm, DMS System - KERN
Combine 0.1 g readability, a 10 kg capacity and IoT‑ready connectivity for reliable laboratory and industrial weighing — order the KERN 572-43 directly via Metav Werkzeuge or consult our specialists for tailored integration. KERN 572-43 Precision Balance — DMS system, 10 kg capacity, 0.1 g readability The KERN 572-43 is a DMS‑based precision balance designed for laboratory and industrial use, combining high accuracy with robust construction for routine quality control and sample analysis DMS technology for high precision 0.1 g 10 kg capacity with 160×200 mm stainless plate Robust aluminium die‑cast housing for daily use KERN Universal Port for RS‑232/USB/Bluetooth/Wi‑Fi Precision and performance for demanding workflows The balance delivers consistent precision through its strain‑gauge (DMS) weighing system, offering a readability of 0.1 g and a maximum capacity of 10 kg, which supports both delicate sample weighing and heavier process loads. With a reproducibility of 0.1 g and linearity of ±0.3 g, the instrument reduces measurement uncertainty in routine tasks and traceable quality checks. The combination of a flat stainless steel weighing surface (160×200 mm) and a clear LCD display with 21 mm digits makes readings quick to interpret and helps maintain throughput in busy workflows. Connectivity and automation for Industry 4.0 workflows Equipped with the KERN Universal Port (KUP), the instrument permits connection of external adapters for RS‑232, USB, Bluetooth, WLAN or Ethernet without installation work, enabling easy data exchange and automation. The KERN Communication Protocol (KCP) allows remote interrogation and control from automation systems or computers, so weighing results can be captured directly into laboratory information management systems or production databases. Compatibility with KERN EasyTouch software and the IoT‑ready design facilitates centralised data logging and process integration, supporting efficient data workflows and regulatory documentation. Built for reliability across environments A robust aluminium die‑cast housing protects the weighing mechanism against shocks and everyday wear, while the integrated levelling bubble and adjustable feet ensure a stable base and dependable results. The work protection hood is supplied as standard to reduce drafts and improve repeatability in sensitive tasks. Designed to operate between −10 °C and 40 °C and up to 80 % relative humidity, the unit withstands a wide range of laboratory and industrial conditions. The compact net weight (approx. 2.7 kg) and mains adapters included for CH, EURO, UK and US outlets make deployment straightforward across sites. Versatile functions that simplify daily tasks A range of laboratory and industrial functions increases utility beyond simple weighing: recipe and percent determination, programmable weighing units (for example g/m or g/m²), and piece counting with a minimum piece weight of 100 mg in lab mode (1 g in normal mode) streamline common processes. Vibration‑free weighing and a large weighing range support inventory checking, sample preparation and quality control alike, while programmable outputs and unit conversions reduce manual calculations and potential for error. For connected, robust precision choose KERN and contact Metav Werkzeuge in Emmerich for integration advice and reliable supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 572 SKU: 572-43 GTIN: 4045761014268 Manufacturer: KERN Country of origin: DE Product type: Precision balance Facts Capacity: 10,000 g Readability: 0.1 g Reproducibility: 0.1 g Linearity: ±0.3 g Weighing plate size: 160×200 mm Plate material: Stainless steel Weighing system: Strain gauge (DMS) Display: LCD, 21 mm digits Net weight: 2.7 kg Operating temperature: −10 °C to 40 °C Max humidity: 80 % Power input: 100 V–240 V Mains adapters included: CH; EURO; UK; US Battery: optional Battery charging time: 10 h Special features KERN Universal Port (KUP) for external interfaces KERN Communication Protocol (KCP) remote control Recipe function and percent determination Piece counting (min 100 mg lab / 1 g normal) Programmable weighing unit (e.g., g/m, g/m²) Vibration‑free weighing and large capacities Aluminium die‑cast housing and levelling bubble Work protection hood included Compatible with KERN EasyTouch software IoT‑ready segment FAQ What is the smallest weight the balance can reliably detect? The KERN 572-43 has a readability of 0.1 g, with counting functionality down to 100 mg in laboratory counting mode and 1 g in normal counting mode. Can the balance be integrated into an automated data capture system? Yes. The KERN 572-43 supports the KERN Universal Port (KUP) for external interface adapters and the KERN Communication Protocol (KCP) for remote interrogation and control, enabling straightforward integration into automated workflows. Is the instrument suitable for both laboratory and industrial environments? Its robust aluminium housing, vibration‑free weighing and extended operating range make the balance suitable for laboratory analysis as well as demanding industrial quality control applications. Does the balance include a draft shield and levelling aids? A work protection hood is supplied as standard, and the instrument includes a levelling bubble and adjustable feet to ensure stable set‑up and repeatable results. Which power options are available for field or mobile use? Mains adapters for CH, EURO, UK and US outlets are included; a battery is optional and charging time is indicated as 10 h. Manufacturer: KERN — Germany; Contact via Metav Werkzeuge: info@metav-werkzeuge.com / +49 2822 7131930
10000 g Precision Caliper-Style Laboratory Balance 0.1 g Readability, Removable Indicator, Stainless Steel Pan - KERN
Take advantage of high-resolution weighing, a detachable display for glove-bag workflows and a stainless-steel weighing plate to keep processes safe and reproducible; order directly via Metav Werkzeuge or contact our consultants for tailored advice. KERN PCD 10K0.1 precision balance — 10,000 g capacity, 0.1 g readability KERN PCD 10K0.1 is a compact precision balance with a removable indicator, designed for laboratory and industrial quality-assurance tasks where flexibility and contamination control are essential High resolution with 0.1 g readability Removable display for glove-bag workflows Stainless steel weighing plate 160×160 mm PRE-TARE and programmable units Flexible weighing where contamination control matters The detachable indicator enables the weighing pan to remain inside a controlled enclosure while the display sits outside, supporting procedures in glove bags or under a fume hood. This arrangement, combined with the removable indicator, reduces cross‑contamination risk and simplifies handling of hazardous or volatile samples. The separate unit design increases operational safety and allows weighing to be carried out where access is restricted without compromising data visibility. Reproducible results and traceable performance With a nominal range of 10,000 g and a readability of 0.1 g, the instrument delivers consistent readings suitable for routine laboratory and production control. The strain‑gauge load cell provides stable measurement behaviour; reproducibility 0.1 g and linearity ±0.3 g ensure differences are meaningful for quality checks. Integrated levelling aids — a spirit level and adjustable feet — allow precise alignment, which directly benefits repeatability and reduces rework in serial processes. Workflow efficiency through versatile functions Built-in functions such as PRE‑TARE and freely programmable units (for example display in g/m or g/m²) speed up common tasks and enable direct readout in industry‑specific measures. The balance supports counting operations with a minimum single‑piece weight of 200 mg in counting mode and 2 g in standard piece counting, which reduces time spent on secondary calculations. An LCD with 21 mm digit height improves legibility in busy environments, helping operators to read results quickly and reliably. Practical supply and operation for bench use and mobility The stainless‑steel weighing plate (160×160 mm) resists routine cleaning and holds up in chemical environments. Power options include a 9 V block battery with approximately 12 h operation and a mains adapter supplied with CH, EURO, UK and US plugs for immediate commissioning in international facilities. The compact footprint and total weight near 1.81 kg make the unit straightforward to reposition on workbenches or move between stations, supporting flexible laboratory layouts and fast process changes. For tailored advice or to request a formal quotation from Metav Werkzeuge, contact our precision team in Emmerich by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — expert consultants are available to assist with selection and delivery. Technical Data Article number: PCD.10K0.1 Manufacturer: KERN GTIN: 4045761133167 Origin: CN Category: Laboratory balances Facts Weighing range: 10,000 g Readability: 0.1 g Reproducibility: 0.1 g Linearity: ± 0.3 g Weighing plate (rectangular): 160×160 mm Housing dimensions (without removable parts): 165×280×75 mm Weighing platform dimensions: 165×165×73 mm Weight: 1.81 kg Operating temperature: 5 °C–35 °C Max. ambient humidity: 80 % Battery type: 9 V block Battery operating time: 12 h Power supply: 220 V–240 V AC, 50 Hz (adapter included) Display digit height: 21 mm Weighing system: strain‑gauge load cell Special features Removable display unit for remote indication PRE‑TARE function for known container weights Freely programmable weighing units (e.g. g/m, g/m²) Spirit level and levelling feet included Protective cover supplied Stainless‑steel weighing plate Counting mode: min. piece weight 200 mg (laboratory), 2 g (normal) Applications: quality assurance, industrial use, laboratory use FAQ What is the maximum capacity and resolution of this balance? The KERN PCD 10K0.1 offers a maximum capacity of 10,000 g with a readability of 0.1 g, suitable for many laboratory and industrial control tasks. Can the display be used outside a glove bag or fume hood? Yes, the removable indicator on the PCD 10K0.1 permits the weighing pan to remain inside a containment area while the display is positioned externally for safe monitoring. Is the balance suitable for counting small parts? The unit supports piece counting with a minimum single‑piece weight of 200 mg in laboratory counting mode and 2 g in normal counting, making it applicable for many inventory and production checks. What power options are available for mobile use? The PCD 10K0.1 can operate on a 9 V block battery for approximately 12 hours and is supplied with a multi‑plug mains adapter (CH, EURO, UK, US) for stationary operation. Which environments and applications are recommended for this instrument? The balance is designed for quality assurance, industrial applications and laboratory tasks, especially where separation of weighing and indication or contamination control is required. KERN — distributed by Metav Werkzeuge, Emmerich am Rhein; info@metav-werkzeuge.com; +49 2822 7131930
10000 g Precision Compact Laboratory Balance 0.1 g Readability, Stainless Steel Pan 150×170 mm - KERN
Take advantage of high-precision weighing, robust connectivity and flexible power options to streamline lab and production processes; the compact design and stainless-steel pan ensure easy cleaning and reliable use. Order the instrument directly via Metav Werkzeuge or ask our consultants for tailored integration advice. KERN PCB 10000-1 compact precision balance — 10 kg capacity, 0.1 g readability The KERN PCB 10000-1 is a compact laboratory balance designed for precise weighing tasks and IoT-enabled data transfer in research, education and industrial environments 10 kg capacity with 0.1 g readability KERN Universal Port (KUP) for modular connectivity Stainless-steel weighing plate for simple cleaning PRE-TARE and recipe function for process control Consistent, traceable results for daily weighing tasks The instrument uses a strain gauge weighing system that delivers 10 kg capacity with 0.1 g readability and reproducibility, ensuring consistent results for routine and critical measurements. The built-in anti‑shock interface between the pan and the load cell reduces vibration, producing stable readings faster and lowering the risk of measurement errors. Linearity of ±0.3 g supports reliable performance across the weighing range, making the balance suitable for both lab procedures and light industrial quality checks. Ready-made connectivity to integrate into Industry 4.0 workflows Equipped with the KERN Universal Port (KUP), the balance accepts plug‑in adapters for RS-232, USB, Bluetooth and Wi‑Fi, enabling straightforward data transfer to PCs, tablets or networked systems without opening the housing. The device supports the KERN Communication Protocol (KCP) for remote interrogation and control, while the optional KUP extension box permits parallel operation of multiple interfaces. This flexibility simplifies logging, process automation and centralised data capture in mixed IT environments. Functions that speed up handling and avoid manual errors Practical features such as the PRE‑TARE function for a known container weight, an integrated recipe function for stepwise component addition and checkweighing with visual tolerance signals support efficient portioning, dosing and assembly tasks. The stainless-steel weighing plate measuring 150 × 170 mm and the included draft shield make routine cleaning and handling straightforward. The clear LCD 21 mm digits enhance readability; battery operation is available with a 9 V block for up to 20 h, and a reacharge cycle of 8 h, allowing measurement away from mains sockets when required. Proven compatibility and service options for uninterrupted use Compatibility with KERN software such as EasyTouch enables simple capture and evaluation of weighing data, while the balance’s modular interface design supports future upgrades. For calibration needs, professional calibration and verification services are available to maintain measurement traceability; the instrument’s robust design and flexible connectivity reduce downtime and support systematic documentation for audits and quality management. Contact Metav Werkzeuge in Emmerich for advice on integrating this KERN balance into production or laboratory workflows — our specialists will recommend the appropriate adapters, accessories and calibration options to suit the application Technical data SKU: PCB.10000-1 Manufacturer: KERN GTIN: 4045761094215 Origin: CN Facts Capacity: 10000 g Readability: 0.1 g Reproducibility: 0.1 g Linearity: ± 0.3 g Smallest piece weight (counting, lab): 200 mg Display digit height: 21 mm Weighing pan: 150 × 170 mm Weight (net): 1.66 kg Operating temperature: 5 °C–35 °C Max ambient humidity: 80% Power input: 100–240 V AC 50/60 Hz 0.5 A Battery charge time: 8 h Battery operation: 20 h Battery type: 9 V block Special features Weighing system: strain gauge Weighing plate material: stainless steel IoT-ready via KERN Universal Port (KUP) Supports RS-232, USB, Bluetooth, Wi‑Fi adapters KERN Communication Protocol (KCP) for remote control PRE‑TARE, recipe function and checkweighing with visual signal Anti‑shock system and draft shield included Compatible with KERN EasyTouch software Extension box KUP‑13 allows parallel use of up to three adapters Mains adapters included: CH, EURO, UK, US FAQ What is the maximum capacity and resolution of the balance? The KERN PCB 10000-1 offers a maximum capacity of 10 kg with a resolution (readability) of 0.1 g, suitable for general laboratory and light industrial weighing tasks. Can the balance be connected to a network or PC? Yes. The balance is IoT-ready via the KERN Universal Port (KUP) and supports adapters for RS‑232, USB, Bluetooth and Wi‑Fi; the KERN Communication Protocol (KCP) enables remote querying and control. Is the instrument suitable for routine portioning and recipe work? The unit includes a recipe function and PRE‑TARE, plus checkweighing with an optical tolerance signal, so it is well suited to portioning, dosing and formulation tasks. How long does the battery operation last and what battery is used? With the optional battery fitted (9 V block), the KERN PCB 10000-1 can operate for up to 20 hours; charging takes approximately 8 hours. Which accessories improve connectivity for multiple devices? The KUP extension box (KUP‑13) allows up to three interface adapters to be used in parallel, enabling simultaneous connections to printers, PCs and mobile devices. Metav Werkzeuge — Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271
1200 g Precision Balance 0.001 g Readability Graphic LCD, Stainless Steel Pan ⌀110 mm, CAL Calibration Program - KERN
Take advantage of precise weighing, a wide 1,200 g range and an intuitive graphic display to accelerate laboratory workflows; the clear recipe storage and CAL calibration support reliable, repeatable results. Order the instrument directly via Metav Werkzeuge or contact our consultants for specification advice and accessory options. KERN PLS 1200-3A precision balance — 1,200 g range, 0.001 g readability The KERN PLS 1200-3A is a precision balance designed for laboratory, research and jewellery testing applications, combining a large weighing range with high resolution and a user-friendly graphic display 0.001 g readability for fine samples 1,200 g weighing range for larger batches Graphic LCD with clear guided menus Integrated recipe database for 99 recipes Accurate measurement for demanding laboratory tasks The instrument delivers laboratory-grade results thanks to 0.001 g readability and a reproducibility of 0.001 g, which together enable precise quantification of small masses and consistent batch-to-batch comparison. This degree of resolution is beneficial in research, environmental analysis and precious-metal testing, where even minor deviations affect outcomes. The large 1,200 g capacity reduces the need for multiple balances when working with mixed sample sizes, supporting more efficient sample handling. Streamlined dosing and recipe control for repeatable processes A built-in recipe database stores up to 99 recipes with up to 20 components each, allowing standard operating procedures to be reproduced quickly and without ambiguity. The guided menus on the graphic LCD present clear text prompts in multiple languages, reducing training time and user errors. The integrated dosing aid (high-stability mode and selectable filters) supports precise addition of components, turning manual weighing into a controlled step in a traceable production or analysis workflow. Robust design and traceable accuracy for quality assurance The balance features a stainless steel weighing pan and a ring-shaped wind shield supplied as standard to protect measurements from drafts; the weighing chamber measures Ø×H 150×60 mm while the pan diameter is 110 mm. The force-compensation weighing system contributes to stable readings and the instrument’s linearity ±0.003 g ensures measurements stay within tight tolerances across the full range. A CAL calibration programme is provided for adjusting accuracy; certified external weights are available as optional accessories for traceable calibration. Practical supply and trusted partnership for long-term use The instrument supports practical laboratory conditions with an operating temperature range of 15°C–35°C and a maximum relative humidity of 80%. Multilingual display guidance and internal memory for complete recipes simplify documentation and handover between operators. Metav Werkzeuge maintains a quality-filtered stock in Emmerich and offers decades of precision expertise, which helps ensure reliable supply and accessory availability for workshops and specialist laboratories across Europe. Contact Metav Werkzeuge for a detailed specification sheet, accessory recommendations and to discuss calibration options for KERN precision balances Technical data SKU: PLS.1200-3A Manufacturer: KERN GTIN: 4045761243293 Origin: China Category: Laboratory balances Core specifications Weighing range: 1,200 g Readability: 0.001 g Repeatability: 0.001 g Linearity: ±0.003 g Weighing pan diameter: 110 mm Weighing chamber Ø×H: 150×60 mm Dimensions (W×D×H): 210×345×100 mm Weight: 4.8 kg Display digit height: 15 mm Operating temperature: 15°C–35°C Max ambient humidity: 80% Power input: 100 V–240 V, 50/60 Hz Features & materials Weighing plate made from stainless steel Graphic LCD with clear text guidance Integrated recipe database (99 recipes × up to 20 components) Dosage aid: high-stability mode and selectable filters Internal storage for complete recipes CAL calibration programme included Ring-shaped wind shield supplied as standard Protective cover included Power adapters included: AUS, CH, EU, UK, US Weighing system: force compensation Minimum sample weight information (USP) provided FAQ What is the smallest sample the balance can measure reliably? For piece-counting mode the instrument can handle samples down to 5 mg in laboratory applications and about 50 mg in normal counting mode; the KERN PLS 1200-3A (SKU PLS.1200-3A) achieves a reproducibility of 0.001 g which supports these limits. Is this instrument suitable for jewellery and precious-metal testing? Yes — the combination of 0.001 g readability, a stainless steel pan and the wind shield make the balance well suited to jewellery and precious-metal checks, as cited in its laboratory and gemstone application areas. How is calibration handled for this balance? The balance includes a CAL programme for adjusting accuracy; certified external calibration weights are available as optional accessories to establish traceability and meet validation requirements. Does the balance support standard operating procedures and recipe workflows? Yes — the integrated recipe database stores up to 99 recipes with up to 20 components each, and the graphic display guides the operator step by step to ensure repeatability and documented dosing. Which power adapters are supplied with the instrument? Power adapters supplied cover AUS, CH, EU, UK and US plugs to match common international mains outlets for laboratory use. KERN — Origin: China
1200 g Precision Caliper Balance 0.001 g Readability, 110 mm Pan Ø, Graphic LCD, Internal Calibration - KERN
Benefit from the combination of 0.001 g readability, a 1,200 g weighing range and reliable internal calibration to keep laboratory routines efficient and traceable; order the KERN PLJ 1200-3A via Metav Werkzeuge or consult our specialists for integration advice. KERN PLJ 1200-3A precision balance — 1,200 g capacity, 0.001 g readability A KERN PLJ 1200-3A precision balance engineered for laboratory use, research and precious-metal testing, offering an extensive weighing range and a clear graphic display for streamlined workflows Large 1,200 g weighing range, 0.001 g readability Integrated recipe memory for up to 99 formulations Ring windscreen and stainless-steel weighing pan Precise results that support quality-controlled workflows The balance delivers 0.001 g readability and a linearity of ±0.003 g, providing the numerical certainty required in analytical work and jewellery testing. The force-compensation weighing system ensures stable readings even under frequent use; reproducibility is specified at 0.001 g, which reduces the need for repeated measurements and speeds up sample throughput. For regulated environments the US Minimum Sample Weight (USP MSW) is supported, allowing assessment of whether the sample mass meets pharmacopeia recommendations. This combination of accuracy and traceable performance reduces rework and supports consistent process control. Faster preparation and fewer input errors through built-in recipe management A dedicated recipe database stores up to 99 recipe entries with up to 20 components each, including names and target values, which simplifies repetitive weighing tasks and minimises transcription errors. The graphic LCD with 15 mm digit height and clear-text multi-language guidance (DE, EN, FR, IT, ES, PT) directs operators through procedures and dosing steps; the dosage aid with high-stability mode and selectable filters helps achieve target masses precisely. These features translate into measurable efficiency gains: fewer manual calculations, faster batch set-up and more reliable documentation during routine or research operations. Durable design, location-independent accuracy and practical installation Constructed with a stainless-steel weighing pan and supplied with a ring-type windscreen (weighing chamber Ø×H 150×60 mm) and work-protection hood, the unit is designed for the practical demands of laboratories and production benches. An internal automatic calibration routine maintains accuracy without external weights, allowing operation in different rooms without manual recalibration. The housing dimensions (210×340×100 mm), net weight of 4.9 kg and universal adapter set (AUS, CH, EURO, UK, US) support simple installation. Operating limits are 15 °C–35 °C and up to 80% relative humidity, enabling reliable performance across typical lab conditions. Contact Metav Werkzeuge for tailored advice on integrating the KERN PLJ 1200-3A into your laboratory setup or for assistance with specifications and accessories Technical data Article number: TPLJG-A SKU: PLJ.1200-3A GTIN: 4045761243217 Manufacturer: KERN Country of origin: CN Facts Weighing range: 1,200 g Readability: 0.001 g Reproducibility: 0.001 g Linearity: ±0.003 g Weighing pan diameter: 110 mm Weighing chamber Ø×H: 150×60 mm Display digit height: 15 mm Weight: 4.9 kg Dimensions (W×D×H): 210×340×100 mm Operating temperature: 15 °C–35 °C Max. relative humidity: 80% Power input: 100 V–240 V, 50 / 60 Hz Adapter set included: AUS; CH; EURO; UK; US Special features Weighing system: force compensation Material: stainless-steel weighing pan Display: graphic LCD with clear-text guidance Internal automatic calibration Recipe memory: up to 99 recipes, up to 20 ingredients each Dosage aid with high-stability mode and filter settings Multi-language user guidance (DE, EN, FR, IT, ES, PT) Work protection hood included Ring windscreen supplied Application areas: laboratory, research and development, jewellery and precious-metal testing, environmental analysis, electronics industry FAQ How many recipes can be stored in the balance? The balance stores up to 99 recipes, each with up to 20 components, allowing predefined target values and names for consistent batch preparation. Is internal calibration available and how does it help? Yes, the PLJ series features internal automatic calibration, which maintains accuracy across locations and reduces the need for external calibration weights during routine operation. Can the balance be used for jewellery and precious-metal testing? Yes, the wide 1,200 g capacity combined with 0.001 g readability and excellent reproducibility makes it suitable for jewellery, alloy analysis and related quality checks. What environmental limits apply to stable measurements? Stable operation is specified between 15 °C and 35 °C with up to 80% relative humidity; the ring windscreen and hood help to reduce draft-related errors. Which power adapters are included for international use? A universal adapter set for AUS, CH, EURO, UK and US is supplied, enabling straightforward use in multiple regions. Metav Werkzeuge, Emmerich am Rhein — info@metav-werkzeuge.com — +49 2822 7131930 — WhatsApp: +49 170 2837271
1200 g Precision Caliper Balance 0.01 g Readability Checkweighing, Stainless Steel Pan 120 mm - KERN
Take advantage of reliable precision, fast readout and compact design for accurate lab and quality‑control routines. The combination of a fast 0.01 g readability, a robust stainless steel pan and an integrated checkweighing function supports repeatable results and efficient portioning. Order the KERN PFB 1200-2 directly via Metav Werkzeuge or ask our consultants if needed. KERN PFB 1200-2 — Compact precision balance, 1,200 g / 0.01 g KERN PFB 1200-2 is a compact precision balance designed for laboratory, industrial and quality‑control tasks where fast, repeatable weighing and simple portioning are required. Fast readout 0.01 g Checkweighing with visual and acoustic signals Stainless steel pan 120 mm Removable windscreen for drafts Rapid, dependable results for routine weighing The balance delivers a clear 0.01 g readability across a 1,200 g range, combining quick stabilisation with a strain‑gauge measurement system. This ensures reproducible results (0.01 g) and a linearity of ±0.03 g, which is essential when small deviations affect downstream processes. The bargraph capacity indicator visualises the remaining load margin, enabling safer use at high fill levels and reducing the risk of overload. Such measurable performance supports efficient decision‑making in both lab and production environments. Built‑in checkweighing to speed up portioning and sorting An integrated checkweighing mode provides optical and acoustic signals to guide portioning, dosing or sorting operations. The audible and visual feedback reduces handling time and the need for constant monitoring, turning repetitive tasks into a faster, more consistent workflow. The quick display and dedicated function keys follow a uniform operating philosophy, so main functions are immediately accessible and training time is minimised—helping teams stay productive from the first use. Compact footprint with robust materials for everyday use With compact dimensions (210×315×90 mm) and a stainless steel weighing pan of 120 mm diameter, this compact laboratory balance fits limited bench spaces while resisting everyday wear. A removable windscreen with a 140×150×65 mm weighing chamber protects measurements from drafts and is taken off easily when open weighing is required. Levelling is supported by a bubble level and adjustable feet to ensure the most accurate readings without time‑consuming setup procedures. Clear display and practical power options for flexible deployment The instrument uses an LCD display with a 15 mm digit height for straightforward reading in routine environments. It accepts a broad mains voltage range (100–240 V, 50/60 Hz) and includes adapter plugs for CH, EU, UK and US sockets, enabling immediate use across international sites. These design choices reduce installation complexity and support mobility between workstations or departments when process needs change. Contact Metav Werkzeuge for tailored advice on the KERN PFB 1200-2, with fast supply from Emmerich and personal consultant support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: PFB-A SKU: PFB.1200-2 GTIN: 4045761202801 Manufacturer: KERN Origin: CN Tariff number: 90160010 Core technical data Weighing range: 1,200 g Readability: 0.01 g Reproducibility: 0.01 g Linearity: ±0.03 g Pan diameter: 120 mm Display digit height: 15 mm Weight: 1.29 kg Operating temperature: 15 °C – 30 °C Max. relative humidity: 80% Special features Checkweighing with visual and acoustic signals Strain‑gauge (load cell) weighing system Quick‑display function Stainless steel weighing pan Removable windscreen; weighing chamber 140×150×65 mm Levelling bubble and adjustable feet included Smallest piece weight for counting (laboratory): 20 mg Adapter plugs included: CH; EU; UK; US Designed for laboratory, industrial and quality‑control applications Compact external dimensions: 210×315×90 mm FAQ What is the maximum capacity and readability of this balance? The KERN PFB 1200-2 precision balance offers a maximum capacity of 1,200 g with a readability of 0.01 g, making it suitable for fine laboratory and QC tasks. Does the instrument support checkweighing for portion control? Yes. The KERN PFB 1200-2 features a checkweighing mode with optical and acoustic signals to assist with portioning, dosing and sorting operations. What type of weighing system is used? This compact laboratory balance uses a strain‑gauge (load cell) system, ensuring stable measurements and reliable reproducibility. Is the windscreen removable for faster handling? The windscreen is removable; the weighing chamber measures 140×150×65 mm, allowing use with or without draft protection as required. Which power adapters are supplied with the device? The KERN PFB 1200-2 is supplied with adapters for CH, EU, UK and US sockets and accepts 100–240 V, 50/60 Hz mains input. KERN • Origin: CN • GTIN: 4045761202801
12000 g Precision Balance 0.05 g Readability, 160×200 mm Stainless Steel Pan, DMS, IoT-Ready - KERN
Take advantage of high-precision weighing, a robust aluminium die-cast housing and flexible IoT connectivity to keep processes reliable and traceable; order the KERN 572-45 directly via Metav Werkzeuge or ask our consultants for application support and configuration advice. KERN 572-45 precision scale — 12,000 g capacity, 0.05 g readability The KERN 572-45 is a precision scale designed for laboratory accuracy and industrial durability, suitable for quality control, sample analysis and workshop tasks. IoT-ready KERN Universal Port KUP 12,000 g capacity with 0.05 g readability Robust aluminium die-cast housing Recipe and percent functions for lab work Consistent accuracy that reduces rework and uncertainty The scale delivers 0.05 g readability and ±0.15 g linearity, providing the stable results required for processes where even small deviations matter. Built around a strain-gauge load cell, the instrument offers a high degree of repeatability — the reproducibility is specified at 0.05 g — which reduces sample re-measurement and supports traceable quality control. The clear LCD readout with 21 mm digits ensures readings are unambiguous, while the stainless steel weighing pan resists corrosion and simplifies cleaning, helping to maintain consistent results in regulated environments. Connectivity that supports Industry 4.0 workflows Equipped with the KERN Universal Port (KUP) and compatible with the KERN Communication Protocol (KCP), the unit integrates easily into digital workflows. External adapters for RS-232, USB, Bluetooth, WLAN or Ethernet can be connected without internal modifications, enabling data export and remote control from laboratory information systems or production monitoring software. This connectivity makes the scale an effective node in automated data capture chains and supports documentation demands for audits and reporting. Robust design for mixed lab and industrial use A robust aluminium die-cast housing protects the weighing technology during daily use in harsher environments. The unit includes a spirit level and adjustable feet for precise levelling and an included dust/protection cover to guard against environmental influences. With an operating temperature range of −10°C–40°C and ambient humidity tolerance up to 80%, the instrument remains reliable across typical laboratory and workshop conditions. The rectangular weighing surface (160×200 mm) provides ample area for vessels and sample containers while keeping a compact footprint (180×310×85 mm). Practical functions that speed routine tasks Built-in features such as a recipe function, percentage determination and piece-counting (with a smallest piece weight for lab counting of 50 mg) are engineered to streamline repetitive tasks and reduce manual calculation. The freely programmable weighing unit allows direct display of application-specific units (for example g/m or g/m²), making it easier to connect measurement results directly to production parameters. Battery operation is optional with a charge time of 10 hours where portability is needed, and an international plug set (CH, EU, UK, US) is supplied for immediate use. Contact Metav Werkzeuge for tailored advice on the KERN 572-45 and receive expert guidance from our Emmerich-based team to configure the best solution for the application. Technical data Article number: 572 SKU: 572-45 GTIN: 4045761014282 Manufacturer: KERN Country of origin: DE Tariff number: 84238129 Core data Capacity: 12,000 g Readability: 0.05 g Reproducibility: 0.05 g Linearity: ±0.15 g Weighing pan: 160×200 mm Housing dimensions: 180×310×85 mm Net weight: 2.7 kg Display digit height: 21 mm Weighing system: strain-gauge load cell Input voltage: 100 V–240 V Battery charge time: 10 h (battery optional) Operating temperature: −10°C–40°C Max ambient humidity: 80% Smallest piece weight (counting, lab): 50 mg Special features Material: stainless steel weighing pan Robust aluminium die-cast housing KERN Universal Port (KUP) for external adapters KERN Communication Protocol (KCP) for remote control Included: protection hood, international power adapters (CH, EU, UK, US) FAQ What is the maximum capacity and precision of this scale? The KERN 572-45 offers a maximum capacity of 12,000 g with a readability of 0.05 g and reproducibility of 0.05 g, suitable for precise laboratory and industrial tasks. Can the scale be integrated into automated data systems? Yes, the KERN 572-45 supports IoT integration via the KERN Universal Port (KUP) and KERN Communication Protocol (KCP), allowing connection to RS-232, USB, Bluetooth, WLAN or Ethernet adapters for data transfer and remote control. Is the unit suitable for both lab and workshop environments? The combination of a stainless steel weighing pan, robust aluminium die-cast housing and an operating range of −10°C–40°C makes the KERN 572-45 appropriate for laboratory analyses and demanding workshop applications. Does the scale support piece counting and recipe functions? Yes, the device includes a recipe function, percentage determination and piece-counting capabilities (smallest piece weight for lab counting: 50 mg), designed to accelerate routine workflows. Is a power adapter included and is battery operation possible? An international plug set (CH, EU, UK, US) is included; battery operation is optional and requires a 10-hour charging time. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271
12000 g Precision Balance With 0.1 g Readability, LCD Display, Stainless Steel Pan, Tare/Stability - KERN
Take advantage of a robust tuning-fork weighing system and readability to 0.1 g for reliable dosing and repeatable quality checks; order the balance directly via Metav Werkzeuge or consult our specialists for conformity calibration advice. KERN PNJ 12000-1M Precision Balance – 12,000 g capacity, 0.1 g readability The KERN PNJ 12000-1M is a precision laboratory balance designed for accurate dosing, parts counting and quality-control tasks in laboratories, workshops and production environments Robust tuning-fork weighing system Readability 0.1 g for precise results Internal automatic calibration Stainless-steel weighing plate, shock-resistant Compact footprint ideal for small benches Consistent accuracy where measurements matter The balance uses a tuning-fork weighing system, a technology that converts mechanical displacement into a stable electronic signal, delivering stable readings and fast response times. Combined with internal automatic calibration, the instrument maintains measurement reliability across environmental changes, which reduces manual adjustments and supports reproducible results. With a readability of 0.1 g and a linearity specification of ±0.2 g, the device provides a clear traceable basis for dosing and quality control tasks that require tight tolerances. Faster counting and controlled stock management For counting applications the instrument offers automatic reference optimisation, which progressively refines average piece weight to improve counting accuracy. The split minimum piece weights (100 mg for precision counting modes, 1 g for standard counting) enable flexible workflows from fine component sorting to routine inventory checks. The integrated bargraph capacity indicator visualises remaining weighing range, helping to avoid overloads and supporting efficient throughput in production and laboratory environments. Durable design for everyday lab and shop usage Built with a stainless-steel weighing plate and a shock-resistant construction, the unit is engineered for frequent handling and a variety of materials. A protective draft shield is included to limit air-flow disturbances during sensitive measurements. Compact overall dimensions and a modest mass make the instrument suitable for constrained benches while preserving mechanical robustness needed for daily shop-floor or bench-top operation. Installation flexibility and operating conditions The balance accepts a standard 220–240 V AC, 50 Hz supply and is delivered with plug adaptors for CH, EURO, UK and US sockets, allowing immediate commissioning in many regions. Rated for operation between 5 °C and 40 °C and up to 80% relative humidity, it performs reliably under normal laboratory climates. The unit’s verification class II and a verification scale division of 1 g support regulated or legal-for-trade applications when conformity calibration is arranged. Contact Metav Werkzeuge for tailored guidance on the KERN PNJ 12000-1M, including required conformity calibration for legal-for-trade use; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss site requirements Technical data Article number: PNJ.12000-1M SKU: PNJ.12000-1M GTIN: 4045761179905 Manufacturer: KERN Origin: CN Tariff number: 90160010 Facts Capacity: 12,000 g Readability: 0.1 g Reproducibility: 0.1 g Linearity: ±0.2 g Minimum weighing weight: 5 g Smallest piece weight (counting, lab): 100 mg Display digit height: 16.5 mm Housing dimensions: 196 × 293 × 89 mm Weighing plate dimensions: 190 × 190 mm Weight: 3.62 kg Operating temperature: 5 °C–40 °C Max ambient humidity: 80 % Power input: 220–240 V AC, 50 Hz Special features Tuning-fork weighing system Internal automatic calibration Verification class: II Verification scale division: 1 g Stainless-steel weighing plate Draft shield included Parts counting with automatic reference optimisation Capacity bargraph indicator Plug-in power supply with CH; EURO; UK; US adaptors FAQ What verification class does the instrument have? The KERN PNJ 12000-1M is supplied in verification class II with a verification scale division of 1 g, suitable for many regulated weighing tasks when conformity calibration is ordered. Can the balance be used for precise parts counting? Yes, the unit features automatic reference optimisation and a minimum piece weight of 100 mg in laboratory counting mode, enabling accurate counting of small components. What environment is required for reliable operation? The instrument operates between 5 °C and 40 °C and up to 80% relative humidity; these conditions help ensure the stated accuracy and reproducibility. Which power options are supplied with the device? The balance is delivered with a plug-in power supply and adaptors for CH, EURO, UK and US sockets, allowing straightforward connection to standard mains supplies. Is the weighing plate suitable for industrial use? The stainless-steel weighing plate is shock-resistant and designed for routine use in laboratory and production environments, supporting robust daily operation. Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930
12000 g Precision Calibrator Balance With 0.1 g Readability, 190×190 mm Stainless Steel Pan, LCD Display - KERN
Take advantage of the combination of high capacity, fine readability 0.1 g and a robust tuning-fork weighing system for dependable, repeatable results in laboratory and quality-control workflows. Order the instrument directly via Metav Werkzeuge or consult our advisors for configuration and calibration options. KERN PNS 12000-1 Precision balance — 12,000 g capacity, 0.1 g readability The KERN PNS 12000-1 is a compact precision balance equipped with a robust tuning-fork weighing system, designed for laboratory, pharmacy and fine‑mechanical weighing tasks. High readability 0.1 g Fast-response tuning-fork system Stainless steel, shock‑resistant pan Integrated CAL adjustment programme Reliable accuracy for routine and critical weighing The instrument delivers capacity 12,000 g with readability 0.1 g, combining a wide weighing range with fine resolution to support both bulk and semi-micro tasks. The tuning-fork weighing system provides a fast, stable signal that improves repeatability and short stabilisation times; this is particularly valuable for repetitive dosing or where throughput matters. Linearity of ±0.2 g and a reproducibility of 0.1 g give a transparent, quantifiable basis for process control, while the bargraph capacity indicator visualises remaining load range to avoid overloads during operation. Practical features that simplify daily workflows A compact footprint and a large stainless steel pan (190×190 mm) make the balance suitable for constrained bench space without sacrificing handling convenience. The integrated CAL adjustment programme allows simple calibration routines, and the automatic reference optimisation improves the accuracy of piece counting down to a minimum reference of 100 mg in laboratory mode. The clear LCD display with 16.5 mm digit height ensures values are legible at a glance, supporting efficiency during long shifts and reducing reading errors. Built for controlled environments and continuous use Designed for standard laboratory conditions, the unit operates between 5 °C and 40 °C with a maximum ambient humidity of 80%, making it fit for a wide range of indoor industrial environments. The robust pan and shock‑resistant construction extend service life under regular handling. Included with the instrument is a draft shield that reduces air currents during sensitive weighings and protects the measurement area, while adapters for CH, EURO, UK and US sockets are supplied to simplify installation across regions. Fit for multiple sectors and precision demands This balance is tailored to pharmacies, quality assurance, electronics and precision engineering, dental laboratories and general laboratory applications where dependable results and reproducible counts are essential. The design supports straightforward integration into standard workflows: capacity visualisation, rapid stabilisation and repeatable readings help to reduce downtime and rework. For operators seeking a balance that pairs performance with a compact design, this model offers a solid, evidence‑based choice. Contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss configuration, calibration services and secure supply of the KERN PNS 12000-1. Technical data Article number: PNS.12000-1 Manufacturer: KERN GTIN: 4045761184008 Tariff number: 84238129 Country of origin: CN Core specifications Capacity: 12,000 g Readability: 0.1 g Repeatability: 0.1 g Linearity: ±0.2 g Pan size: 190×190 mm Housing dimensions: 196×293×89 mm Weight: 2.7 kg Operating temperature: 5 °C–40 °C Maximum ambient humidity: 80% Display type: LCD Display digit height: 16.5 mm Power input: 220–240 V AC, 50 Hz Features & applications Tuning-fork weighing system CAL adjustment programme for calibration Capacity bargraph indicator Automatic reference optimisation for accurate counting Stainless steel, shock-resistant weighing pan Draft shield included External test weights available (extra) Suitable for pharmacies, quality control, electronics, precision engineering, laboratories, dental labs Power adapters included: CH; EURO; UK; US FAQ How accurate is the balance for routine weighing tasks? The KERN PNS 12000-1 offers readability 0.1 g, repeatability of 0.1 g and linearity of ±0.2 g, providing consistent accuracy for both batch and sample weighings. Can the instrument perform piece counting for small parts? Yes. The automatic reference optimisation improves counting precision; the smallest reference for counting in laboratory mode is 100 mg, enabling reliable piece counts for small components. Is a calibration routine included and can it be performed on site? A CAL adjustment programme is integrated for routine calibration. Metav Werkzeuge can advise on calibration options and arrange professional calibration services if required. What environmental conditions does the balance require? The unit is specified for operation between 5 °C and 40 °C and up to 80% relative humidity; the draft shield helps maintain stability during sensitive measurements. Which industries is this balance best suited to? This precision balance is intended for pharmacies, quality control, electronics and fine mechanics, laboratories and dental labs where repeatable, documented weighing is needed. Manufacturer: KERN — Country of origin: CN — Article number: PNS.12000-1
120g Precision Balance 0.001g Readability With Checkweighing, Stainless Steel Pan, LCD - KERN
Combine 0.001 g readability with a 120 g capacity and compact dimensions for dependable laboratory weighing; order the KERN precision balance directly via Metav Werkzeuge or consult our technical advisors if further details are required. KERN PFB 120-3 — Compact precision balance, 120 g / 0.001 g readability KERN PFB 120-3 is a compact precision balance designed for laboratory, industrial and quality-control weighing where high resolution and fast response are essential. Fast 0.001 g readability for precise dosing Checkweighing with visual and audible signal Compact footprint for limited bench space Stainless steel pan, 80 mm diameter, removable windscreen Precise results for demanding measurement tasks The PFB 120-3 delivers 0.001 g readability and a 120 g capacity, combining fine resolution with a practical weighing range for small samples and dose-sensitive work. The instrument uses a strain gauge weighing system, which converts force into an electrical signal and ensures stable measurement values. Linearity and reproducibility are tightly controlled, so results are repeatable and documented precision is available for routine lab tasks and spot checks in production settings. This level of accuracy supports compliance with quality-control procedures and reduces uncertainty in small-mass determinations. Quick checkweighing to speed up sorting and portioning An integrated checkweighing function provides both optical and acoustic feedback to support portioning, dosing and sorting processes. A rising capacity bargraph indicates the remaining weighing range and prevents overloads, while the LCD display with 15 mm digit height ensures values are legible at a glance. Fast response times mean that the balance signals completion promptly, shortening handling times during repetitive tasks and increasing throughput without sacrificing accuracy. Space-saving design with professional handling features A compact housing and a small footprint make this precision balance well suited to constrained bench spaces. The supplied removable windscreen protects measurements from drafts while a built-in spirit level and adjustable feet enable precise levelling for the most accurate results. The stainless steel weighing pan is corrosion-resistant and easy to clean, supporting hygienic operation in laboratories and production areas where cleanliness matters. User-friendly operation and robust supply options Operating logic is simplified by dedicated main-function keys, so setting up tare, mode selection and checkweighing is straightforward even for occasional users. The clear LCD display and tactile controls reduce training time and help avoid input errors. Multiple plug adapters are supplied (CH; EURO; UK; US) for international compatibility and the wide input-voltage range ensures reliable operation across typical laboratory environments. Together, these practical features make the instrument a dependable tool for day-to-day metrology tasks. Contact Metav Werkzeuge for tailored advice and secure a KERN PFB 120-3 precision balance from our Emmerich distribution centre; our consultants will confirm specifications and delivery options to suit the workshop or laboratory. Technical data Article number: PFB-A SKU: PFB.120-3 GTIN: 4045761202863 Manufacturer: KERN Origin: CN Category: Laboratory balances Core specifications Capacity: 120 g Readability: 0.001 g Reproducibility: 0.001 g Linearity: ±0.003 g Pan diameter: 80 mm Weighing chamber (W×D×H): 140×150×65 mm Housing dimensions (W×D×H): 210×315×90 mm Display digit height: 15 mm Operating temperature: 15°C–30°C Max ambient humidity: 80% Weight: 1.23 kg Power supply: 100 V–240 V, 50/60 Hz Special features Weighing system: strain gauge (DMS) Checkweighing with optical and acoustic signal Removable windscreen Built-in spirit level and adjustable feet for levelling Capacity bargraph indicator LCD display with clear digits Fast response for efficient workflows Supplied adapters: CH; EURO; UK; US Suitable for laboratory and industrial quality-control applications FAQ What is the smallest increment this balance can display? The KERN PFB 120-3 precision balance displays increments of 0.001 g, enabling reliable measurement of very small mass changes. Is the balance suitable for piece counting? Yes, the instrument supports counting functions; the counting capability can handle small parts where the 0.001 g readability and minimum piece-weight specifications are appropriate. How does the checkweighing function help production tasks? Checkweighing on the PFB 120-3 gives visual and acoustic signals to indicate whether a sample is within the programmed tolerance, which speeds up sorting, portioning and quality checks. Can the balance be used internationally without additional adapters? The balance accepts 100 V–240 V input and is supplied with adapters for CH, EURO, UK and US plugs to match common regional sockets. What environmental conditions are required for accurate weighing? Stable room conditions are recommended; the PFB 120-3 is specified for operation between 15°C and 30°C and up to 80% relative humidity. KERN; Origin: China; GTIN: 4045761202863
15000 g Precision Balance For Heavy Samples 13 mm Display, 200×200 mm Stainless Steel Pan, Class II - KERN
Take advantage of the balance's combination of high capacity, dependable accuracy and practical design for continuous laboratory or workshop use. The device delivers repeatable results thanks to a tuning‑fork weighing system, clear 13 mm digits and a robust stainless steel pan, ensuring efficient handling of heavy samples; order the MPES.15000-1M Precision Balance directly via Metav Werkzeuge or ask our consultants if needed. MPES.15000-1M Precision Balance (KERN) — 15,000 g capacity, 0.1 g readability The MPES.15000-1M is a precision balance designed for heavy samples in laboratory and industrial settings, offering robust construction and reliable performance for weighing, counting and quality checks 15,000 g capacity with 0.1 g readability Stainless steel pan 200×200 mm ±0.2 g linearity for consistent results Plug-in power supply, optional rechargeable battery Precise high-capacity weighing for consistent quality control The balance combines a high nominal capacity of 15,000 g with a fine readability of 0.1 g, delivering dependable numerical stability for bulk samples and medium-fine measurements. The tuning‑fork weighing system, a proven force-restoration principle, stabilises the measuring element quickly and reduces sensitivity to minor environmental disturbances; this translates into repeatability of 0.1 g and a linearity of ±0.2 g, which together support repeatable parts counts and reproducible process checks. Such specifications allow confident application in production sampling and laboratory routines where consistent results are essential. Practical layout and robust components for daily use A 200×200 mm stainless steel pan provides a corrosion-resistant working surface that is easy to clean after frequent use, while the compact housing (220×333×93 mm) and modest weight (~4.28 kg) keep the instrument portable within the workspace. The display features 13 mm high digits for fast reading across the bench, and the supplied plug-in power supply (220–240 V AC, 50 Hz) includes adapters for CH and EURO outlets; an optional rechargeable battery is available with a charging time of 15 hours if mains-free operation is needed. These design decisions reduce handling time and improve ergonomic interaction at the workstation. Versatile functionality for counting, compliance and integration Counting capability is supported with a smallest piece weight of 100 mg in laboratory mode and 1 g in normal mode, enabling efficient inventory checks and piece-count routines. The balance meets Class II approval requirements, making it suitable for many regulated workflows where traceable, compliant measurements are required. Built by KERN in Japan, the instrument is geared toward users who prioritise a balance of capacity and accuracy without sacrificing durability; the compact footprint and robust feature set facilitate integration into quality-control stations and mixed-use production benches. Contact Metav Werkzeuge to request a tailored quote, discuss integration options for the MPES.15000-1M or arrange technical advice from our consultants at Emmerich. Technical data SKU: MPES.15000-1M Manufacturer: KERN GTIN: 4045761076976 Article number: PES Origin: JP eCl@ss: 32120101 Tariff number: 84238129 Facts Capacity: 15,000 g Readability: 0.1 g Repeatability: 0.1 g Linearity: ±0.2 g Pan size: 200×200 mm Pan material: stainless steel Housing dimensions: 220×333×93 mm Instrument weight: 4.28 kg Display digit height: 13 mm Operating temperature: 10°C–30°C Max ambient humidity: 80% Approval class: II Special features Weighing system: tuning‑fork principle Power supply: 220–240 V AC, 50 Hz (plug-in) Power adapters included: CH, EURO Battery: optional, charge time 15 h Smallest piece weight (lab mode): 100 mg Smallest piece weight (normal mode): 1 g FAQ What level of accuracy can be expected for large samples? The MPES.15000-1M delivers a readability of 0.1 g with linearity ±0.2 g, making it suitable for large batches where consistent, repeatable readings are required for quality control. Is the instrument suitable for legal-for-trade applications? The instrument is specified as Class II, which aligns it with many regulated applications; for specific trade approvals and local legal-use requirements, refer to the applicable national regulations and calibration procedures. How does the tuning‑fork weighing system benefit day-to-day use? A tuning‑fork mechanism provides rapid stabilisation and reduced susceptibility to small vibrations, ensuring faster settling times and stable readings in routine laboratory and workshop environments. Can the balance be used for piece counting and small parts? Yes; counting is supported with a smallest piece weight of 100 mg in laboratory mode and 1 g in normal mode, enabling efficient inventory and assembly checks. What power options are available for mobile benches? The instrument is supplied with a 220–240 V AC plug-in adapter (CH and EURO plugs included), and an optional rechargeable battery (charge time 15 h) is available for locations without permanent mains access. Manufacturer: KERN — Origin: Japan. Seller: Metav Werkzeuge, Emmerich am Rhein. Email: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271
1600g Precision Balance 0.01g Readability, Stainless Steel Pan 150mm, DMS, IoT-Ready - KERN
Take advantage of the combination of high-precision weighing (0.01 g), a 1,600 g capacity and robust connectivity for Industry 4.0 integration to maintain reliable process control. Order the KERN 572-33 directly via Metav Werkzeuge or ask our consultants for application advice. KERN 572-33 Precision Balance — 1,600 g capacity, 0.01 g readability The KERN 572-33 is a precision balance for laboratory and industrial environments, offering high-resolution weighing with flexible interfaces for automated workflows. Allrounder model for lab and industry High precision: readability 0.01 g Robust aluminium die-cast housing KERN Universal Port for flexible I/O Consistent accuracy that supports quality assurance The instrument relies on a strain gauge (DMS) weighing system, delivering a readability of 0.01 g and reproducibility of 0.01 g, with linearity of ±0.03 g. Such specifications mean repeatable results for routine analyses and quality control tasks, reducing measurement uncertainty and rework. Linearity and reproducibility figures explain how close repeated measurements stay to one another and to the true value, which is essential for documented processes in laboratories and production. Seamless data flow for automated processes Equipped with the KERN Universal Port (KUP) and support for the KERN Communication Protocol (KCP), the device permits connection of RS‑232, USB, Bluetooth, WLAN or Ethernet adapters without installation effort. This flexible connectivity enables direct data capture, instrument remote control and integration into Industry 4.0 systems, streamlining traceability and reducing manual data entry. The balance’s IoT-ready design supports centralised logging and automated quality workflows. Durable build for everyday industrial use A stainless steel weighing plate (Ø 150 mm) and a robust aluminium die-cast housing protect the weighing cell in demanding environments. Vibration‑free weighing and a supplied draft shield maintain stability in less-than-ideal conditions, while the integrated levelling spirit and adjustable feet ensure exact setup. The unit operates between −10 °C and 40 °C and tolerates up to 80% relative humidity, making it suitable for many laboratory benches and workshop areas. Practical functions that save time in routine tasks Built-in features such as the recipe function, percent determination and flexible piece counting convert technical performance into everyday efficiency: handle batching, incoming inspection and inventory checks with fewer steps. The display uses a clear LCD with 21 mm digits for easy reading; programmable units and a freely programmable weighing unit allow direct results in application-specific measures, supporting fast, error‑reduced decision making during production or testing. Compatibility with the KERN EasyTouch software facilitates data analysis and documentation. Choose the KERN 572-33 when reliable, connected precision matters — contact Metav Werkzeuge in Emmerich for tailored recommendations and integration support. Technical data Article number: 572 SKU: 572-33 GTIN: 4045761014169 Manufacturer: KERN Country of origin: DE HS code: 90160010 Facts Weighing range: 1,600 g Readability: 0.01 g Reproducibility: 0.01 g Linearity: ±0.03 g Weighing plate diameter: 150 mm Display digit height: 21 mm Weighing system: strain gauge (DMS) Weight: 2.3 kg Operating temperature: −10 °C to 40 °C Max. relative humidity: 80% Power input: 100 V–240 V Battery charging time: 10 h Special features Material: stainless steel weighing plate Housing: aluminium die-cast KERN Universal Port (KUP) for RS‑232, USB, Bluetooth, WLAN, Ethernet KERN Communication Protocol (KCP) for remote control and data querying Functions: recipe, percent, piece counting, vibration-free weighing Draft shield and levelling spirit included Power adapter with CH/EU/UK/US plugs IoT-ready for Industry 4.0 applications Compatible with KERN EasyTouch software FAQ What accuracy can be expected for routine weighing tasks? The KERN 572-33 provides a readability of 0.01 g and reproducibility of 0.01 g, which ensures consistent, high-resolution results suitable for many laboratory and quality-control applications. Can the balance be integrated into an automated data-collection system? Yes. The balance supports the KERN Universal Port (KUP) and KERN Communication Protocol (KCP), enabling connection via RS‑232, USB, Bluetooth, WLAN or Ethernet for centralised data capture and remote control. Is the weighing plate resistant to corrosive samples? The device is supplied with a stainless steel weighing plate, offering robust surface resistance for common laboratory and workshop samples. Does the instrument include accessories for reliable setup? A draft shield is included to reduce environmental effects, and levelling spirit and adjustable feet are supplied for precise alignment during installation. Which applications suit this precision balance best? The balance is designed as an allrounder for laboratory analyses, quality control, workshop tasks and food industry sampling, where precise weighing and connectivity are required. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271
16kg Precision Balance DMS, Readability 0.1 g, 160×200 mm Stainless Steel Pan, IoT-Ready, KERN - KERN
Take advantage of high-precision weighing, robust industrial design and seamless connectivity to support reproducible results across lab and workshop environments. Order the instrument directly via Metav Werkzeuge or ask the Metav consultants for tailored technical advice. KERN 572-49 Precision balance — 16 kg range, 0.0001 kg readability (IoT-ready) The KERN 572-49 is a precision balance designed for laboratory and industrial use, combining strain-gauge weighing technology with extensive data-interface options for quality control, recipe formulation and production counting Readability 0.0001 kg and reproducibility 0.1 g Robust aluminium die-cast housing KERN Universal Port for RS‑232/USB/Bluetooth 16 kg capacity with 160×200 mm pan Consistent laboratory-grade results for routine and critical tasks The balance delivers high-precision readings with a capacity of 16,000 g and a readability of 0.0001 kg (0.1 g), enabling reliable preparation, sample analysis and quality control. The strain‑gauge weighing system ensures stable output under varying loads; linearity of ±0.3 g and reproducibility 0.1 g support repeatable measurement chains. Lab-type functions such as a recipe function and percentage determination translate the raw measurement into actionable process data, reducing follow-up correction and documentation time. Streamlined data handling and Industry 4.0 compatibility Equipped with the KERN Universal Port (KUP) and the KERN Communication Protocol (KCP), the instrument is prepared for modern data workflows: external adapters allow RS‑232, USB, Bluetooth, WLAN or Ethernet connections without internal modification. This IoT‑ready connectivity simplifies integration into LIMS or production control systems and enables remote queries and control. The clear LCD with 21 mm digit height supports fast visual checks while electronic interfaces secure automated logging for traceability. Built for daily use in workshops and production environments A stainless-steel weighing pan (160×200 mm) and a sturdy aluminium die-cast housing provide mechanical protection and a stable working base. The balance includes a work protection cover, spirit level and adjustable feet for precise levelling; adapters for CH, EU, UK and US plugs are supplied for immediate operation. Operating conditions from −10 °C to 40 °C and a compact unit mass of 2.7 kg make the instrument suitable where space is limited but accuracy remains essential. Practical functions such as piece counting and vibration‑compensated weighing support industrial throughput without sacrificing precision. Contact Metav Werkzeuge for expert guidance on selecting and integrating the KERN 572-49 into your measurement workflow; Metav’s specialists in Emmerich are available to advise on configuration and compatibility Technical data Article number: 572 SKU: 572-49 GTIN: 4045761014350 Manufacturer: KERN Origin: DE Facts Capacity: 16,000 g Readability: 0.0001 kg (0.1 g) Reproducibility: 0.1 g Linearity: ±0.3 g Pan size: 160×200 mm Display digit height: 21 mm Operating temperature: −10 °C to 40 °C Weight: 2.7 kg Power input: 100–240 V Special features Strain‑gauge weighing system Stainless-steel weighing pan Aluminium die-cast housing KERN Universal Port (KUP) for external adapters KERN Communication Protocol (KCP) for remote control Recipe function and percentage determination Piece-counting and vibration‑free weighing Work protection cover included Plug adapters: CH; EU; UK; US IoT‑ready for Industry 4.0 applications FAQ What is the maximum capacity and resolution of the balance? The balance offers a maximum capacity of 16,000 g with a resolution of 0.0001 kg (0.1 g), suitable for both laboratory dosing and industrial parts weighing. Can measurement data be exported directly to a computer or network? Yes, the KERN 572-49 supports external adapters via the KERN Universal Port and can connect using RS‑232, USB, Bluetooth, WLAN or Ethernet for data export and system integration. Is the balance suitable for piece counting and recipe preparation? The instrument includes a piece-counting function and a recipe mode that convert weight values into direct production parameters, supporting efficient batch preparation and inventory checks. How robust is the construction for workshop use? With an aluminium die-cast housing, stainless-steel pan and vibration‑compensated weighing, the balance is engineered for daily workshop and industrial environments while maintaining laboratory-grade precision. Does the balance include levelling aids and protection accessories? Yes, a spirit level, adjustable feet and a work protection cover are supplied to ensure accurate levelling and secure operation during routine use. Manufacturer: KERN · Country: Germany · GTIN: 4045761014350
2000 g Precision Caliper Balance 0.01 g Readability, Checkweighing Function, Stainless Steel Pan - KERN
Benefit from pinpoint weighing performance, compact bench-space design and an integrated checkweighing function for faster portioning and reliable quality control — order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. KERN PFB 2000-2 Precision Balance — compact lab balance with 0.01 g readability The KERN PFB 2000-2 is a compact precision balance designed for laboratory use and industrial quality control, offering fast indication and a built‑in checkweighing mode for portioning, dosing and sorting tasks Rapid results with 0.01 g readability Built-in checkweighing with visual and acoustic signal Stainless-steel weighing pan, Ø 120 mm Compact housing 210×315×90 mm saves bench space Strain-gauge system for reliable precision Precise measurements that speed up quality control The KERN instrument delivers 0.01 g readability across a 2000 g range, combining fine resolution with an ample capacity for routine laboratory samples. The load is measured by a strain‑gauge system, a robust principle that converts force into an electrical signal; this provides consistent, repeatable data and helps to reduce drift compared with purely mechanical mechanisms. The result is a device suited to tasks where small mass differences matter, such as analytical sample preparation or inspection routines that require verifiable tolerance limits. Built-in checkweighing and practical aids for efficient workflows An integrated checkweighing mode emits visual and acoustic signals to indicate whether a sample lies within predefined limits, streamlining portioning, dosing and sorting operations without additional equipment. A rising capacity indicator bargraph shows remaining weighing range at a glance, while the supplied wind shield and removable weighing chamber (140×150×65 mm) minimise air currents that could disturb light loads. Level adjustment is made simple by the included spirit level and adjustable feet, ensuring reproducible results on any benchtop. Compact design and clear readout for routine tasks The housing of the instrument measures 210×315×90 mm and weighs approximately 1.51 kg, making it easy to position on crowded benches or transport between workstations. The stainless‑steel pan (Ø 120 mm) resists chemical exposure and is simple to clean. Readings appear on an LCD with 15 mm digit height for rapid interpretation, and the quick‑indication feature supports fast decision making in production or testing environments. Electrical supply is universal (100–240 V, 50/60 Hz) and adapters for CH, EURO, UK and US plugs are included, enabling immediate use in diverse locations. Performance metrics include reproducibility 0.02 g and linearity ±0.05 g, providing a verifiable basis for routine quality-control records. Discuss application suitability and delivery options for the KERN PFB 2000-2 with Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and efficient supply from our Emmerich site Technical data Article number: PFB-A SKU: PFB.2000-2 Manufacturer: KERN GTIN: 4045761202818 Origin: CN Core specifications Weighing range: 2000 g Readability: 0.01 g Reproducibility: 0.02 g Linearity: ±0.05 g Pan diameter: 120 mm Weighing chamber (B×T×H): 140×150×65 mm Housing dimensions (without removable parts): 210×315×90 mm Weight: 1.51 kg Display type: LCD Display digit height: 15 mm Power supply: 100 V - 240 V, 50 / 60 Hz Operating temperature: 15 °C - 30 °C Max. relative humidity: 80 % Customs tariff code: 90160010 Design & features Weighing system: strain‑gauge system Wind shield included, removable Checkweighing with visual and acoustic signals Capacity bargraph indicator Spirit level and adjustable feet for levelling Stainless‑steel weighing pan Quick‑indication (fast display) feature Power adapters included: CH; EURO; UK; US On‑site calibration service available through inspection service FAQ How accurate is the balance for small samples? The KERN PFB 2000-2 provides a readability of 0.01 g and reproducibility of 0.02 g, making it suitable for small sample work where fine resolution is required. Can the device be used for routine portioning and sorting? Yes, the built‑in checkweighing mode uses visual and acoustic cues to support portioning, dosing and sorting operations without extra peripherals. What environment is recommended for reliable use? Stable room conditions are advised; the balance is specified for operation between 15 °C and 30 °C and up to 80% relative humidity to maintain rated performance. Is the weighing chamber protected against drafts? A removable wind shield is supplied and the chamber dimensions are 140×150×65 mm, which helps to stabilise readings for light masses. Which power options are supplied with the instrument? The unit accepts 100–240 V, 50/60 Hz and is delivered with adapters for CH, EURO, UK and US plugs to allow immediate use in different regions. Manufacturer: KERN — Origin: CN — No additional manufacturer contact details available
2000 g Precision Caliper-Style Laboratory Balance 0.1 g Readability, Stainless Steel Pan, DMS Weighing System - KERN
Take advantage of the combination of precise 2000 g / 0.1 g weighing, flexible IoT connectivity and a compact, durable stainless steel design for reliable process integration and traceable results; order via Metav Werkzeuge or consult the technical team for configuration advice. KERN PCB 2000-1 Compact IoT-ready Precision Laboratory Balance, 2000 g / 0.1 g The KERN PCB 2000-1 is a compact precision laboratory balance engineered for laboratory, education and industrial process weighing, offering modular interface expansion and stable results for routine and research tasks. IoT-ready KUP port for flexible interfaces High precision: 2000 g / 0.1 g readability Stainless steel weighing pan 130×130 mm PRE-TARE and recipe functions for dosing High-precision weighing that improves process reliability The compact precision balance delivers consistent results through a strain gauge weighing system with a maximum capacity of 2000 g and a readability of 0.1 g. Tight performance is supported by a reproducibility of 0.1 g and a linearity of ±0.2 g, which reduces uncertainty in routine checks and formulation tasks. The stainless steel weighing pan (130×130 mm) and integrated anti-shock mounting between pan and load cell limit vibrations, producing faster stabilisation and fewer reweighs—benefits that translate into improved throughput and less scrap in production or teaching environments. Modular connectivity for Industry 4.0 workflows Equipped with the KERN Universal Port (KUP), the instrument accepts plug-in adapters (RS-232, USB, Bluetooth, WLAN, Ethernet) so data transfer and control can be added without opening the housing. Combined with the KERN Communication Protocol (KCP), remote interrogation and automation become straightforward: weight data, control commands and batch inputs can be routed to PCs, networks or mobile devices, enabling traceable data collection and seamless integration into digital lab and production systems. The KUP-13 extension box permits parallel use of up to three adapters for multi-interface setups, simplifying connection to label printers, LIMS or MES. Practical functions and power options for flexible use Built-in functions such as PRE-TARE, a recipe mode for staged additions and checkweighing with optical signalling support dosing, sorting and filling tasks without add-on software. The display is an easy-to-read LCD with 21 mm digit height and an included draft shield protects results during sensitive measurements. Portability and continuous operation are supported by a 9 V block battery option with about 20 hours runtime and an 8-hour recharge time; mains operation uses the supplied plug-in power adapter (CH; EURO; UK; US). Compatibility with KERN EasyTouch software further supports data logging and evaluation in educational and R&D settings. Contact Metav Werkzeuge in Emmerich for tailored configuration, interface advice and fast delivery of the KERN PCB 2000-1; technical consultants are available by email, phone or WhatsApp to discuss adapter options and calibration services. Technical data Article number: PCB SKU: PCB.2000-1 GTIN: 4045761084780 Manufacturer: KERN Origin: CN Capacity: 2000 g Readability: 0.1 g Reproducibility: 0.1 g Linearity: ±0.2 g Weighing pan: 130×130 mm Housing dimensions: 166×249×80 mm Net weight: 1.4 kg Minimum piece weight (counting, lab): 200 mg Minimum piece weight (counting, normal): 2 g Display digit height: 21 mm Operating temperature: 5 °C–35 °C Max. relative humidity: 80% Power input: 100–240 V AC 50/60 Hz 0.5 A Battery: 9 V block, approx. 20 h runtime Battery charging time: 8 h Weighing system: strain gauge Weighing pan material: stainless steel Interface modularity: KUP universal port Communication protocol: KCP Functions: PRE-TARE, recipe mode, checkweighing, free programmable unit Anti-shock system between pan and load cell Draft shield (work protection hood) included Supplied adapters: CH; EURO; UK; US Software compatibility: KERN EasyTouch Extension option: KUP-13 for up to three adapters FAQ How accurate is the balance for routine laboratory work? The KERN PCB 2000-1 provides a readability of 0.1 g with reproducibility of 0.1 g and a linearity of ±0.2 g, delivering consistent accuracy suitable for routine lab, education and many industrial tasks. Can the balance be connected to a network or a PC? Yes. The KUP universal port accepts modular adapters (e.g. RS-232, USB, Bluetooth, WLAN, Ethernet) and, together with the KERN Communication Protocol (KCP), allows data transfer and remote control from computers and networked systems. Is there a battery option for mobile use? The instrument supports a 9 V block battery with approximately 20 hours operation and an 8-hour recharge time, enabling temporary use without mains power. Does the balance support checkweighing and dosing workflows? Built-in checkweighing with optical signalling, PRE-TARE and a recipe function allow controlled dosing, portioning and staged additions for production and laboratory processes. Is calibration and data capture supported? Calibration can be managed via standard procedures and the balance is compatible with KERN EasyTouch software for data capture and evaluation; local calibration services are also available through Metav Werkzeuge partners. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930
20000 g Precision Balance 0.1 g Readability, Graphic LCD, Stainless Steel Pan, DMS System - KERN
Take advantage of the combination of a large 20,000 g capacity, 0.1 g readability and an intuitive graphic display to maintain efficient, traceable weighing processes. Order the balance directly via Metav Werkzeuge or request tailored advice from our consultants. KERN PLS 20000-1F Precision balance — 20,000 g range, 0.1 g readability The PLS 20000-1F is a precision balance designed for laboratory and industrial environments, offering a wide weighing range combined with a comfortable graphic display for guided workflows. Large 20,000 g capacity, 0.1 g readability Graphic LCD for fast, guided operation Built-in recipe database with 99 entries Stainless-steel weighing pan and draft shield Reliable measurement for broad laboratory tasks The balance delivers a 20,000 g capacity with 0.1 g readability, supported by a strain-gauge weighing system that ensures stable and consistent results. Reproducibility is specified at 0.1 g and linearity at ±0.4 g, figures that translate into dependable performance for routine analysis, sample preparation and quality checks. These measurable parameters make the instrument suitable where traceable, repeatable weighing is required and provide a clear technical basis for process control. Faster processes through guided display and recipe management An integrated graphic LCD simplifies operation with clear, language-selectable on-screen instructions and a display digit height of 15 mm for easy reading. The internal recipe database stores up to 99 recipes with up to 20 components each, saving complete recipe names and target weights to accelerate repetitive dosing tasks. The balance also provides a dosing aid with a high-stability mode and selectable filter settings, which together reduce calculation steps and help to avoid rework during formulation or sample distribution. Practical design for laboratory conditions and compliance A stainless-steel weighing pan and included draft shield support hygienic handling and protect results from drafts. The unit features a CAL programme for straightforward adjustment of accuracy; external calibration weights are available separately for verification when required. The instrument operates reliably between 15 °C and 35 °C and in relative humidity up to 80%, meeting typical laboratory environmental ranges while remaining compact and portable at approximately 3.2 kg. Contact Metav Werkzeuge in Emmerich for personalised specification advice, calibration options and dependable delivery of the KERN PLS 20000-1F Technical data Article number: TPLSG-A SKU: PLS.20000-1F GTIN: 4045761243354 Manufacturer: KERN Country of origin: CN Facts Weighing range: 20000 g Readability: 0.1 g Reproducibility: 0.1 g Linearity: ±0.4 g Weighing pan (rectangular): 200×175 mm Weighing pan thickness: 15 mm Housing dimensions: 210×345×100 mm Display digit height: 15 mm Operating temperature: 15 °C–35 °C Max. ambient humidity: 80% Weight: 3.2 kg Power input: 100 V–240 V, 50 / 60 Hz Special features Weighing system: strain-gauge (DMS) Display: graphic LCD with multilingual cleartext guidance (DE/EN/FR/IT/ES/PT) Internal memory: full recipe storage with name and target values Recipe database: up to 99 recipes, up to 20 components each Dosage aids: high-stability mode and selectable filters CAL calibration programme for accuracy adjustment Draft shield and work-protection hood included Weighing plate material: stainless steel Power adapters included: AUS; CH; EURO; UK; US Typical applications: laboratory work, R&D, jewellery and precious-metal testing, environmental analysis, electronics industry FAQ What is the smallest change in mass the balance can register? The KERN PLS 20000-1F provides a readability of 0.1 g and reproducibility of 0.1 g, enabling detection of small mass changes suitable for many laboratory tasks. Can recipes be saved and reused for recurring formulations? Yes. The balance features an internal recipe database that stores up to 99 recipes with up to 20 components each, allowing repeated processes to be executed quickly and consistently. Is the balance suitable for counting applications? Counting functions are supported; the instrument provides reference piece weights with laboratory counting down to 500 mg and standard counting down to 5 g, depending on the application and accuracy requirements. How is accuracy maintained over time? Accuracy can be verified and adjusted via the integrated CAL programme; for formal verification, external calibration weights are recommended and available separately to perform traceable checks. Which accessories are supplied with the unit? The KERN PLS 20000-1F is supplied with a stainless-steel weighing pan and a work-protection hood (draft shield), plus a set of international power adapters (AUS, CH, EURO, UK, US). Metav Werkzeuge, Emmerich am Rhein, Germany — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271
2000g Precision Laboratory Balance 0.1g Readability Stainless Steel Pan 130×130mm DMS, LCD Display, 20h Battery - KERN
Benefit from a compact weighing solution that combines readability 0.1 g, a 2,000 g capacity and a stainless-steel pan for reliable everyday laboratory results; order the balance directly via Metav Werkzeuge or consult our specialists for application advice. KERN 440-47N — Compact precision laboratory balance, 2,000 g / 0.1 g A compact KERN 440-47N precision balance for routine laboratory and quality-control weighing Compact dimensions for limited bench space Readability 0.1 g for precise results Percentage function for target-value weighing Dependable accuracy for routine analytical tasks The balance delivers readability 0.1 g across a 2,000 g capacity, backed by a strain gauge system that provides consistent results for routine laboratory and production-control tasks. Low reproducibility (0.1 g) and linearity ±0.2 g reduce retests and increase throughput, which supports efficient process control. The clear LCD display with 15 mm digits improves legibility in busy environments while the stainless steel weighing pan (130×130 mm) resists corrosion and simplifies cleaning, ensuring the unit remains a reliable part of daily workflows. Space-saving design and practical functions that aid workflow Designed for confined workbenches, the instrument’s compact dimensions (165×230×74 mm) and included draft shield make it suitable for precise weighing in restricted spaces. The integrated percentage function allows results to be shown relative to a set target (100 %) and to display deviations quickly, which streamlines formulation and process checks. Power options include mains operation (100–240 V AC) and battery operation (9 V block), enabling flexible placement and up to 20 hours of battery runtime for occasional portable use. Traceable handling, counting support and compliant sample guidance Counting tasks are supported with a smallest piece weight down to 200 mg in counting mode for laboratory use and 2 g under normal conditions, enabling efficient inventory and component checks. For compliance, the instrument references the USP minimum sample weight principle to indicate the smallest recommended load for a given accuracy class, helping to interpret results for standards-driven workflows. The balance’s compact construction and tested specifications make it suitable for laboratories, training benches and quality-control stations where documented, traceable results are required. Choose the KERN 440-47N for compact, dependable laboratory weighing and contact Metav Werkzeuge for tailored advice and secure supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: 440-47N Article number: 440 Manufacturer: KERN GTIN: 4045761013063 Category: Laboratory balances Origin: CN Facts Readability: 0.1 g Weighing range: 2,000 g Display digit height: 15 mm Weighing pan: 130×130 mm Weight: 1.1 kg Reproducibility: 0.1 g Linearity: ±0.2 g Battery type: 9 V block Battery runtime: 20 h Battery charge time: 10 h Operating temperature: 5 °C–35 °C Max. ambient humidity: 80 % Power input: 100–240 V AC 50/60 Hz 0.5 A Special features Weighing system: strain gauge Weighing pan material: stainless steel Percentage determination: enabled Draft shield: included Power options: mains adapter with CH, EURO, UK, US plugs; battery optional Minimum sample weight guidance: USP referenced Display type: LCD Product group: precision balances FAQ What level of accuracy can be expected for routine weighing? The KERN 440-47N provides a readability of 0.1 g with reproducibility of 0.1 g and linearity of ±0.2 g, delivering reliable results for routine laboratory applications. Is the balance suitable for piece counting and small parts? Yes; counting mode supports a smallest piece weight of 200 mg for laboratory counting and 2 g under normal counting conditions, which helps streamline inventory and component checks. Can the instrument be used without mains power? Battery operation is possible with a 9 V block and an estimated runtime of 20 hours, allowing temporary portable use away from mains supply. Does the balance include protection against draughts during sensitive measurements? A draft shield is included to reduce air disturbances and improve stability for small-sample and high-precision weighing tasks. How does the percentage function help in daily routines? The percentage determination enables weighing to a defined target value (100 %) and quickly shows deviations, simplifying formulation and comparative checks. KERN · Origin: China · Dealer contact: info@metav-werkzeuge.com | +49 2822 7131930
200g Precision Caliper Balance 0.001g Readability, Checkweighing, Stainless Steel Pan 80mm, LCD 15mm - KERN
Take advantage of precise weighing, rapid response and an integrated checkweighing aid for consistent batch control; order the unit directly via Metav Werkzeuge or consult our specialists for application advice. KERN PFB 200-3 – Precision laboratory balance with 200 g capacity and 0.001 g readability The KERN PFB 200-3 is a compact precision balance designed for laboratory and industrial quality-control tasks where fine resolution and rapid feedback are required. Fast-response precision balance Checkweighing with visual and audible alarm High resolution 0.001 g readability Compact footprint 210×315×90 mm Accurate measurement for routine and critical tasks The KERN PFB 200-3 delivers high-resolution weighing with a readability of 0.001 g across a 200 g capacity, making it suitable for laboratory analyses and quality assurance where small mass differences matter. The balance uses a strain-gauge weighing system, which supports stable readings and a reproducibility of 0.002 g, so process decisions are based on reliable figures. The documented linearity of ±0.005 g provides predictable performance across the load range; this translates into fewer retests and faster throughput for repetitive tasks. Built-in checkweighing streamlines sorting and dosing An integrated checkweighing function offers an optical bargraph and an audible signal to indicate whether a sample is under, within, or over a defined tolerance band, supporting fast sorting, dosing and portion control. The clear LCD with 15 mm digit height and an ascending capacity indicator help operators assess remaining range at a glance. For shop-floor environments and routine QC stations, this combination reduces handling time and minimises error rates while preserving traceable results. Compact design that fits limited bench space With overall dimensions of 210×315×90 mm and a pan diameter of 80 mm, the unit has a compact footprint that suits confined workstations without compromising functionality. A removable draft shield (weighing chamber 140×150×65 mm) enables precise handling of small masses while allowing quick access for cleaning and sample placement. The stainless steel weighing plate combines durability with easy maintenance, keeping hygiene and corrosion resistance straightforward in daily use. Practical features for reliable operation Level adjustment via a built-in levelling vial and adjustable feet is supplied as standard to ensure accurate levelling and repeatable results. The balance is supplied with a universal mains adapter (100–240 V, 50/60 Hz) including CH, EURO, UK and US plugs for immediate deployment in multi‑location operations. Counting capability is supported with a smallest piece weight of 2 mg for laboratory counting and 20 mg under normal settings; this makes the instrument suitable for both precise mass measurement and simple inventory-count tasks. For precision dosing and dependable QC, contact Metav Werkzeuge to arrange delivery of the KERN PFB 200-3 or to discuss which setup best suits the laboratory or production line in Emmerich. Technical data Article number: PFB-A SKU: PFB.200-3 GTIN: 4045761202849 Manufacturer: KERN Category: Laboratory balances Origin: CN Numbers / Core technical data Weighing capacity: 200 g Readability: 0.001 g Reproducibility: 0.002 g Linearity: ±0.005 g Weighing pan diameter: 80 mm Weighing chamber (W×D×H): 140×150×65 mm Display digit height: 15 mm Overall dimensions (W×D×H): 210×315×90 mm Weight: 1.22 kg Operating temperature: 15 °C–30 °C Max. relative humidity: 80 % Designs / Special features Weighing plate material: stainless steel Weighing system: strain-gauge (DMS) Checkweighing: visual bargraph and audible signal Draft shield: removable Levelling vial and adjustable feet: standard Power supply: mains adapter 100–240 V, 50/60 Hz (CH; EURO; UK; US plugs) Counting mode: smallest piece weight 2 mg (laboratory) / 20 mg (normal) Fast-response display and capacity indicator Application areas: laboratory use, industrial applications, quality control FAQ How accurate is the balance for fine laboratory work? The KERN PFB 200-3 achieves a readability of 0.001 g with reproducibility of 0.002 g and linearity of ±0.005 g, which supports precise measurements for analytical and QC tasks. Can the unit be used for checkweighing and sorting tasks? Yes. The integrated checkweighing function provides both visual and audible signals to indicate whether a sample is below, within or above set tolerances, making it suitable for dosing and sorting applications. Is the balance suitable for counting small parts? Counting is supported; the instrument specifies a smallest piece weight of 2 mg in laboratory counting mode and 20 mg in normal counting mode, enabling both high-resolution counting and routine inventory checks. What environmental conditions are required for optimal performance? Stable operation is ensured between 15 °C and 30 °C with relative humidity up to 80%; levelling via the built-in vial is recommended for best accuracy with the KERN precision balance. Which power options are supplied with the balance? The unit includes a mains adapter compatible with 100–240 V, 50/60 Hz and is supplied with CH, EURO, UK and US plugs for immediate use at different locations. How easy is it to clean and maintain the weighing area? The removable draft shield and stainless steel weighing plate allow quick cleaning and access, aiding routine maintenance and ensuring hygienic conditions for laboratory procedures. Metav Werkzeuge, Emmerich am Rhein, Germany · info@metav-werkzeuge.com · +49 2822 7131930 · WhatsApp +49 170 2837271
200g Precision Compact Laboratory Balance 0.01g Readability, Stainless Steel Pan 105mm, LCD Display - KERN
Take advantage of high-precision readability, compact handling and reliable power options to streamline weighing tasks in the lab or workshop; order the instrument directly via Metav Werkzeuge or ask our consultants for tailored advice. KERN PCB.200-2 Compact laboratory balance — 200 g capacity, 0.01 g readability The KERN PCB.200-2 is a compact laboratory balance designed for precise weighing, piece counting and routine quality-control tasks in laboratories, inspection stations and small-scale production. 200 g capacity with 0.01 g readability Stainless-steel weighing pan, Ø 105 mm Battery operation and mains adapter included Strain-gauge system for stable results Precision where it counts The compact instrument delivers 0.01 g readability and a linearity of ±0.02 g, which together ensure repeatable results for fine analytical tasks. Built around a strain-gauge weighing system, the balance converts force into stable electrical signals, reducing drift and improving short-term reproducibility. The documented reproducibility of 0.01 g makes it suitable for routine laboratory checks and component verification, while the clear 15 mm LCD digits support quick reading of measured values. This combination of technical accuracy and simple readout speeds up decision-making in quality control and inventory tasks. Designed for efficient daily operation A practical layout and robust materials reduce downtime and simplify handling. The stainless-steel weighing pan (Ø 105 mm) resists corrosion and is easy to clean after repeated use. With a compact footprint (166 × 249 × 83 mm) and a total weight of 1.02 kg, the instrument fits easily on crowded benches or inspection tables. Power is flexible: the balance accepts a 9 V block battery with an estimated 20 h battery life and includes a mains adapter with CH, EU, UK and US plugs for international usability. The wide input range (100–240 V AC, 50/60 Hz) supports global workshop environments and reduces the need for additional converters. Reliable performance across common work conditions Built to perform under normal laboratory conditions, the balance operates between 5 °C and 35 °C and tolerates up to 80 % relative humidity. For piece-counting tasks, the instrument distinguishes very small parts, offering a smallest piece weight for lab counting of 20 mg and 200 mg under standard counting settings, which helps when controlling inventory of fasteners or precision components. The robust weighing system and durable pan mean consistent results even during frequent handling, giving technicians confidence when documenting batches or conducting incoming inspections. Choose the KERN PCB.200-2 for dependable precision and contact Metav Werkzeuge in Emmerich for buying advice or further technical details at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: PCB SKU: PCB.200-2 Manufacturer: KERN GTIN: 4045761084872 Measurements & performance Capacity: 200 g Readability: 0.01 g Reproducibility: 0.01 g Linearity: ± 0.02 g Weighing pan diameter: 105 mm Dimensions: 166 × 249 × 83 mm Weight: 1.02 kg Display digit height: 15 mm Operating temperature: 5 °C to 35 °C Max relative humidity: 80 % Battery life: 20 h Features & design Weighing pan material: stainless steel Weighing system: strain gauge Power: 9 V block battery or mains adapter Adapter plugs included: CH, EU, UK, US Input voltage: 100–240 V AC 50/60 Hz 0.5 A Smallest piece weight (counting lab): 20 mg Smallest piece weight (counting normal): 200 mg Origin: CN FAQ Is this balance suitable for accurate piece counting of small components? The KERN PCB.200-2 supports piece counting with a smallest piece weight of 20 mg under laboratory counting conditions and 200 mg in standard counting mode, making it suitable for small components and fasteners. What power options are available and how long does the battery last? The instrument accepts a 9 V block battery with approximately 20 h runtime and is supplied with a mains adapter compatible with CH, EU, UK and US plugs for flexible use. How precise and stable are measurements with this balance? This compact balance offers 0.01 g readability, 0.01 g reproducibility and ±0.02 g linearity, based on a strain-gauge weighing system designed for stable daily results. Can the balance be used at workshop benches or in ambient conditions? Yes; the device operates reliably between 5 °C and 35 °C with up to 80 % relative humidity, and its stainless-steel pan and compact form factor suit workshop and lab benches. KERN — Emmerich seller: Metav Werkzeuge, Emmerich am Rhein — info@metav-werkzeuge.com — +49 2822 7131930
precision balances for milligram accuracy and larger samples
Precision balances are designed for exact measurement of larger samples in the milligram range, offering a balance between fine resolution and extended weighing capacity. Also referred to as precision scales or precision weighing instruments, they serve quality control, production and formulation tasks where both accuracy and throughput matter.
how they work and where they fit in the workflow
These precision balances combine a high-resolution load cell with a wider weighing range to measure samples that are too large for analytical balances yet still require milligram-level precision. Typical applications include routine quality control checks, batch formulation in production lines and incoming material inspections in trade and distribution. The instruments function by converting mechanical force into electrical signals that are processed to give stable, repeatable mass readings suitable for process control and documentation.
tangible benefits that improve daily production
- Faster, reliable measurements that reduce inspection cycle time and improve throughput
- Consistent milligram-level resolution across larger sample sizes, lowering rework and scrap rates
- Stable readings under normal workshop conditions, supporting reproducible formulation recipes
- Flexible application: suitable for laboratory tasks as well as industrial and commercial weighing needs
why Metav is the practical partner for your weighing needs
Metav stands for democratisation of precision. With a pragmatic supply hub in Emmerich and a catalogue exceeding 250,000 items, Metav combines decades of expertise with dependable logistics. Over 48,000 customers trust Metav’s selection and quality filter, making the Metav assortment the sensible choice for workshops and industrial procurement seeking reliable precision balances and precision scales.
technical data at a glance
- measurement resolution: milligram range
- weighing capacity: larger weighing ranges (suitable for bigger samples)
- typical applications: quality control, production, formulation
- suitable environments: laboratory, industry, trade
summary: precise, flexible weighing for production and lab use
Precision balances deliver milligram-level accuracy with extended capacity, making them a flexible solution for laboratory, industrial and commercial weighing tasks where both precision and sample size matter.
FAQ
What is the main difference between precision balances and analytical balances?
Precision balances provide milligram-level resolution across larger weighing ranges, whereas analytical balances are optimised for microgram resolution with smaller maximum capacities. Use a precision balance when sample size or throughput requires greater capacity without sacrificing fine accuracy.
Can precision balances be used on the production floor?
Yes. Precision balances are suitable for production environments and are designed to deliver stable readings for quality control and formulation tasks in industrial settings.
Which industries benefit most from precision balances?
Precision balances are commonly used in manufacturing quality control, chemical and pharmaceutical formulation, and trade departments that require reliable mass measurements of larger samples.
How do precision balances support reproducible formulations?
By combining consistent milligram resolution with larger weighing ranges, precision balances ensure recipe components are measured accurately, reducing batch variability and improving product quality.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com