Precision specialist calipers for inaccessible measurements
Specialist calipers are engineered to measure fine grooves, deep bores and complex contours with reproducible accuracy down to the micrometre, delivering reliable results where standard calipers reach their limits. Designed with customised jaw shapes and robust materials such as carbide or ceramic tips, these calipers excel in measuring thin-walled aerospace structures, medical implants and intricate toolroom cavities while resisting coolants and abrasion. Available as digital, analogue and inductive variants, they offer options from quick-read displays and data transfer to extreme accuracy of ±0.001 mm for laboratory use. By combining tailored jaw geometries with durable construction, these precision tools improve inline quality control and support both prototype and series production.
60° Thread Measurement Attachment For Calipers - Microtech Metrology
Precise 60° flank-angle verification and dedicated 6.5 mm pitch compatibility ensure repeatable inspection results; durable construction supports routine shop-floor use. Order the measuring attachment directly via Metav Werkzeuge or ask our consultants if needed. Measuring Attachment for 60° Thread Measurement by Microtech Metrology The Measuring Attachment is a compact accessory for quick verification of 60° thread profiles and components with a 6.5 mm pitch. 60° flank angle for standard thread checks Designed for 6.5 mm pitch verification Robust build for shop-floor use Compatible with common inspection tools Reliable thread-profile checks for production control The attachment offers a focused solution for thread profile verification where a defined flank geometry is required. With its 60° flank angle it matches the common standard for many metric threads, enabling consistent geometric checks without complex setups. The dedicated 6.5 mm pitch orientation reduces interpretation errors when comparing measured profiles to nominal values, so that assessments are faster and less dependent on operator estimation. This results in measurable time savings during repetitive inspections and supports a higher throughput in incoming‑goods and in‑process controls. Seamless fitting into inspection routines Engineered as an accessory for measuring equipment, the unit integrates into standard inspection routines and complements handheld gauges or bench fixtures. The compact form factor and clear reference surfaces simplify positioning, which lowers cycle times during sampling inspections. As an accessory, it reduces the need for bespoke gauges and enables technicians to retain familiar procedures while improving verification precision. The result is a pragmatic balance between shop-floor convenience and technical rigour, allowing production teams to maintain quality without interrupting workflow. Built for repeatability and durable performance Constructed for routine use in an industrial environment, the attachment emphasises reproducibility and serviceability. Stable contact geometries and a sturdy design minimise wear effects on the reference faces, supporting repeatable measurements across multiple shifts. The accessory’s function is focused on thread geometry control rather than general-purpose metrology, which makes it a specialist instrument for clear, repeatable results. For purchasers seeking traceable inventory control, the product is listed with GTIN and SKU for easy documentation and stock management. For precise and efficient thread verification, choose the Microtech Metrology measuring attachment and contact Metav Werkzeuge in Emmerich for tailored technical advice and reliable supply. Technical data Article number: 141377165T GTIN: 4061905458507 Manufacturer: Microtech Metrology Core specifications Angle: 60° Pitch: 6.5 mm Special features Thread profile verification Accessory for measuring instruments Category: Accessory (measuring instruments) Compact, shop-floor suitable design FAQ What thread angle does the attachment check? The attachment checks a 60° flank angle, matching standard thread geometry for profile verification. Is the product suitable for a 6.5 mm thread pitch? Yes, the device is designed for verification of a 6.5 mm pitch and supports direct comparison to that nominal value. Which instruments is the accessory compatible with? The accessory is intended for use with common inspection tools and fixtures used in thread-profile checks and general measuring workflows. How is the product identified for procurement and stock? Supplier identification: SKU 141377165T and GTIN 4061905458507 are provided for ordering and inventory tracking. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
60° Thread Measurement Attachment For Calipers - Microtech Metrology
Take advantage of a purpose-built 60° measuring geometry and a clear 7 mm pitch reference to standardise thread checks and reduce rework. Benefit from a compact metrology accessory that streamlines inspection routines and supports traceability; order the measurement attachment directly via Metav Werkzeuge or request application advice from our consultants. Measurement Attachment for Thread Inspection (60°) — Microtech Metrology The Measurement Attachment is a precision accessory designed for angle-specific thread inspection and metrological verification in workshop and production environments. Precision 60° measuring angle Designed for 7 mm thread pitch Accessory for metrology instruments Consistent geometry for reliable thread profiles The accessory uses a defined 60° measuring angle to match the profile geometry of standard metric threads, ensuring the measuring edge corresponds to the intended flank angle. That controlled geometry reduces interpretation errors during profile checks and improves the reproducibility of comparative measurements. By referencing the 7 mm pitch directly in the inspection set-up, operators gain a clear technical basis for decisions, which helps maintain production quality and reduces rejects. Compact accessory that speeds up inspection workflows Its purpose-built form factor keeps the measuring fixture lightweight and easy to handle while remaining stable enough for routine checks. The design supports faster alignment and repeatable engagement with threaded features, which increases inspection speed and enhances repeatability across batches. As an accessory component, it integrates into existing metrology routines without major process changes, delivering a pragmatic efficiency uplift for quality-control stations. Traceability and identification for quality systems Identification data such as GTIN and SKU make the component straightforward to record in inventory and quality documentation; this supports audit trails and part traceability within a calibration or inspection plan. The accessory is supplied as a clearly identifiable metrology item for thread measurement and complements standard inspection equipment in the lab or on the shop floor, aiding conformity with internal test procedures and external quality requirements. Purchase the Microtech Metrology measurement attachment (60°) via Metav Werkzeuge for consistent thread inspection, or contact Metav Werkzeuge in Emmerich for tailored application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 141377170T GTIN: 4061905458514 Manufacturer: Microtech Metrology Category: Accessory (metrology) Numbers / Core technical data Angle: 60° Thread pitch: 7 mm Designs / Special features For thread measurement Purpose-built 60° measuring geometry Accessory for metrology instruments FAQ What is the primary purpose of this attachment? The measurement attachment is intended for angle-specific thread inspection and provides a defined 60° measuring geometry for reliable profile checks. Which thread pitch does the accessory reference? This accessory is specified for a 7 mm thread pitch, enabling direct alignment with that pitch during inspection routines. Can this accessory be recorded in inventory and quality documentation? Yes. The component is identifiable by its GTIN: 4061905458514 and Article number: 141377170T, which supports traceability and documentation. Is the attachment suitable as a supplement to existing metrology equipment? Designed as an accessory for metrology instruments, the attachment complements standard inspection equipment and helps standardise thread checks. Does the 60° angle correspond to metric thread standards? The 60° measuring angle matches the typical flank angle used in standard metric thread profiles and is therefore appropriate for common thread inspection tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
60° Thread Measurement Attachment For Calipers - Microtech Metrology
Combine reliable 60° geometry with a clear specification for 1.5 mm thread pitch to support consistent inspection routines and efficient traceability. The combination of precise profile alignment, simple integration into existing metrology equipment and clear product identification supports dependable quality control. Order the measuring attachment directly via Metav Werkzeuge or ask our consultants if needed. Measuring attachment for 60° thread measurement — Microtech Metrology The measuring attachment from Microtech Metrology serves as a compact inspection aid for standard 60° thread profiles, designed to aid metrology processes and workshop quality checks. 60° geometry for standard thread profiles Suited for 1.5 mm thread pitch checks Precision accessory for metrology instruments GTIN 4061905458736 for traceability Consistent profile verification for reliable output This accessory enables dependable thread measurement by matching the standard 60° flank angle used in most metric threads. By providing a defined contact geometry for the thread flanks, the attachment reduces ambiguity in profile checks and improves repeatability across multiple inspections. The clear specification for 1.5 mm pitch supports common M‑thread checks, making the item suitable for routine control tasks in maintenance bays and small production lines. The result is fewer measurement rechecks and a steadier production flow. Fast integration into inspection workflows Designed as an inspection aid rather than a standalone instrument, the attachment fits into established measuring setups and complements existing calipers and bench fixtures. Installation and removal are straightforward, allowing measurement sequences to remain efficient and focused on throughput. The compact format minimises handling effort and helps technicians maintain a steady inspection pace, which translates directly into time savings during batch checks and setup routines. Practical traceability and identification for quality records A clear GTIN and manufacturer reference support traceability within quality documentation and spare‑part logistics. Labelling and straightforward identification of the accessory simplify inventory and process documentation, reducing administrative overhead when logging inspection results. The defined geometry and pitch specification make it easier to record what was measured and with which attachment, supporting reproducible QA records and audit trails. Built to support professional metrology environments Although compact, the attachment is conceived for professional use in metrology and workshop contexts where consistent contact geometry is required. As a specialist accessory from Microtech Metrology, it complements measuring instruments used in inspection benches, service departments and quality control stations. The accessory helps bridge the gap between handheld checks and bench measurements by offering a standardised contact form for thread verification. Contact Metav Werkzeuge to specify the Microtech Metrology measuring attachment for 60° thread checks and obtain tailored advice and prompt shipment from Emmerich. Technical data Article number: 141377115T Name: Measuring attachment (Messaufsatz) Manufacturer: Microtech Metrology Core specifications Angle: 60° Pitch: 1.5 mm GTIN: 4061905458736 Features Intended for thread measurement Category: Accessories (metrology) Listed under: Messgeräte → Zubehör FAQ What thread profiles is this attachment suitable for? The measuring attachment is designed for 60° thread profiles and is specified for checks on common metric pitches such as 1.5 mm. Can the attachment be used with standard calipers or only specific instruments? The accessory is a precision aid intended to integrate with common metrology setups; compatibility depends on the instrument mounting and clamping provisions of the caliper or fixture. Is traceability provided for this accessory? Yes, the accessory is supplied with a clear identifier (GTIN 4061905458736) to support traceability and inventory management. Which manufacturer produces this measuring attachment? This accessory is produced by Microtech Metrology (see manufacturer details below). Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
60° Thread Measurement Attachment for Calipers, 60° Angle - Microtech Metrology
Benefit from a compact measuring solution that delivers repeatable results thanks to its 60° geometry and specific 4 mm pitch compatibility; the accessory simplifies thread inspection and speeds up routine checks. Order the measuring attachment directly via Metav Werkzeuge or consult their specialists for integration advice. Measuring attachment — 60° thread measuring accessory by Microtech Metrology (4 mm pitch) The Measuring attachment is a precision accessory for fast, repeatable 60° thread measurement, designed to check standard thread profiles with a pitch of 4 mm in routine inspection tasks. 60° geometry for standard thread profiles For threads with 4 mm pitch Precision accessory from Microtech Metrology Faster, more reliable verification of 60° thread profiles The accessory converts a manual or instrument-based routine into a focused thread measurement task by presenting a defined 60° contact geometry that matches common ISO/metric profiles. By fixing the contact angle, the measuring head reduces operator variability and improves repeatability during comparative checks. This is particularly useful when measuring threads with a 4 mm pitch, where consistent geometry is essential to assess flank form and pitch conformity. The measured benefit is a clearer go/no-go decision during first-off and in-process inspections, reducing rework and assembly rejects. Seamless integration with inspection equipment and workflows As a dedicated measuring accessory, it has been conceived for straightforward incorporation into existing metrology setups classified as instrument accessories. The compact design keeps handling simple and helps maintain throughput on the shop floor: inspections can be performed faster without sacrificing precision, supporting lean quality processes. For production environments that separate measurement and machining operations, the accessory enables short verification cycles at the bench or at incoming inspection, preserving traceability while maintaining cycle time targets. Robust manufacturing and consistent performance in routine use Made for repetitive use in workshop and laboratory environments, this accessory supports stable contact during measurement, lowering the risk of false readings caused by inconsistent probe orientation. The construction ensures long-term dimensional stability so that routine checks remain comparable over time. Where traceable documentation is required, the component's identity via SKU and GTIN facilitates record-keeping and inventory control, contributing to a coherent quality management process overseen by procurement and inspection teams. For ordering or technical clarification regarding the Microtech Metrology 60° measuring attachment (SKU 141377140T), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to request procurement details or compatibility notes Technical data SKU: 141377140T GTIN: 4061905458453 Manufacturer: Microtech Metrology Core data Angle: 60° Thread pitch: 4 mm Special features Accessory for thread measurement Category: Accessory (measuring instruments) Intended for inspection and verification tasks FAQ What thread angle does the accessory support? The accessory is configured for a 60° contact geometry suitable for standard metric thread profiles and flank-angle verification. Which thread pitch is this measuring attachment intended for? This accessory is specified for threads with a 4 mm pitch and is intended to assist in consistent pitch and flank checks. Is the measuring attachment a standalone instrument? The component is an accessory for measuring instruments and inspection setups; it is not a full measuring device on its own. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
60° Thread Measurement Attachment, for 1.25 Pitch Threads - Microtech Metrology
Take advantage of a compact solution for reliable thread checks: the attachment’s 60° profile and compatibility with a 1.25 mm thread pitch enable consistent identification of ISO metric thread form and reduce rework in inspection routines; order via Metav Werkzeuge or consult our specialists for application support. Measuring Attachment for Thread Measurement (60°) — 1.25 mm pitch, precision metrology accessory (Microtech Metrology) The Measuring Attachment for Thread Measurement (60°) is an accessory designed to assess ISO metric thread profiles with a defined 60° geometry, intended for use with workshop and laboratory inspection instruments to verify thread form and pitch. 60° measurement geometry for ISO metric threads Suitable for 1.25 mm thread pitch verification Designed as a precision metrology accessory Accurate thread profile verification for consistent inspection A defined 60° flank angle is the reference geometry for ISO metric threads; using an attachment that reproduces this profile simplifies the comparison between a measured thread and its nominal form. The accessory converts flank geometry into a repeatable contact condition, which helps to reveal profile deviations and pitch errors quickly. This focused verification reduces the need for destructive testing and supports faster decisions during quality control. Fast integration into inspection workflows and fewer rejects As a compact metrology accessory, the device is intended to be mounted on standard inspection fixtures and comparators, where it becomes part of a routine check rather than a separate, time‑consuming measurement step. Verifying the 1.25 mm pitch with a matching geometry shortens cycle times and improves throughput in batch inspections, delivering a clear operational advantage through faster acceptance or rejection criteria and lower downstream rework rates. Traceability, documentation and practical benefits Identification via GTIN and SKU ensures unambiguous traceability in instrument inventories and calibration records. The attachment supports a measurable, documented approach to thread inspection, enabling consistent reporting across shifts and sites. Combined with Metav’s distribution and advisory service, the accessory provides a pragmatic way to raise measurement reliability in production and service departments while fitting established metrology workflows. Contact Metav Werkzeuge today to discuss how the Microtech Metrology measuring attachment (SKU 141377112T) can be incorporated into existing inspection routines and to receive tailored application advice Technical data Article number: 141377112T GTIN: 4061905458729 Manufacturer: Microtech Metrology Name: Measuring attachment – 60° for thread measurement Core technical data Angle: 60° Thread pitch: 1.25 mm Special features Accessory for thread inspection Category: Accessories (Metrology) Images: 141377110T-main.png, 141377110T-detail.png FAQ What thread form is this attachment designed for? The measuring attachment is configured for ISO metric threads with a 60° flank geometry and is intended for thread form verification in inspection setups. Which thread pitch can be checked with this accessory? This accessory matches a 1.25 mm thread pitch and is suitable for verification of that pitch when used with compatible inspection instruments. How does the attachment improve inspection workflows? By reproducing the standard 60° profile, the accessory enables quick, repeatable checks of thread form and pitch, helping to reduce cycle times and minimise downstream rework; the product is supplied by Microtech Metrology (SKU 141377112T). Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
60° Thread Measurement Attachment, For 60° Threads - Microtech Metrology
Take advantage of a compact, purpose-built solution that matches standard thread geometry and the specified 3 mm pitch for reliable inspections; the combination of precise flank contact and straightforward mounting keeps inspection throughput high. Order this accessory directly via Metav Werkzeuge or contact our consultants for compatibility advice. Measuring attachment — 60° thread inspection accessory (3 mm pitch) by Microtech Metrology The Measuring attachment is a compact accessory engineered for thread inspection at a 60° flank angle, optimised for checks on threads with a 3 mm pitch and for use with compatible measurement instruments. 60° contact geometry for standard threads Designed for thread pitch 3 mm checks Precision accessory for measuring instruments Easy mounting on compatible gauges Precise contact geometry for dependable thread checks The accessory's 60° flank profile corresponds to the geometry used in standard metric threads, providing direct and reproducible contact with the thread flanks. This ensures precision in profile evaluation and reduces interpretative error during manual inspections. By converting flank geometry into a simple measurement interface, the unit helps organisations achieve faster verification without complex setup, supporting consistent repeatability across routine quality checks. Faster inspection routines with fewer handling steps Equipping a measuring device with this attachment streamlines the inspection workflow by eliminating the need for separate gauges or time‑consuming visual assessments. The available 3 mm pitch specification allows quick selection for relevant thread series, which enhances efficiency in batch testing and sample inspections. For production environments where throughput matters, the accessory offers a practical balance between ease of use and measurement reliability, helping to shorten cycle times and reduce non‑value‑adding handling. Practical design that suits workshop use Manufactured for robust everyday use, the accessory integrates cleanly into standard metrology setups and is intended as a reliable tool for thread verification tasks. Where precise flank contact is required, the unit provides a stable reference that reduces measurement variability introduced by inconsistent probing force. Sourcing from Microtech Metrology via Metav ensures traceable supply and consistent availability for workshop and production environments. Contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to confirm instrument compatibility and secure the Microtech Metrology measuring attachment (SKU 141377130T) for immediate dispatch Technical Data Article number: 141377130T GTIN: 4061905458439 Brand: Microtech Metrology Type: Measuring attachment Application: Thread inspection Facts GTIN: 4061905458439 Thread pitch: 3 mm Angle: 60° SKU: 141377130T Special features Designed for 60° flank thread profiles Intended for checks on 3 mm pitch threads Accessory for measurement instruments Category: Measurement accessories FAQ Which thread form does the 60° measuring geometry match? The 60° contact geometry matches standard metric thread flank angles; the Microtech Metrology measuring attachment (SKU 141377130T) is therefore suited for verification of such profiles. For which thread pitch is this accessory specified? This accessory is specified for a 3 mm thread pitch and is intended for inspections where that pitch is the reference. Can the attachment be used with digital callipers or other gauges? The unit is supplied as an accessory for compatible measurement instruments; confirm specific mounting options for the intended gauge and the Microtech Metrology SKU 141377130T. What documentation identifies the part and maker? Identification is via SKU 141377130T and GTIN 4061905458439; the accessory is produced by Microtech Metrology Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
60° Thread Measuring Attachment For 1.5–6mm Threads, Set Of 10 - Microtech Metrology
Achieve consistent verification of small threads with the combination of a true 60° profile, coverage for 1.5–6 mm threads and supply as a set of 10 measuring heads; this reduces inspection time and increases throughput on the shop floor. Order directly via Metav Werkzeuge or contact their consultants for selection support. Measuring attachment – 60° thread measurement accessory by Microtech Metrology A measuring attachment designed for precise inspection of 60° thread profiles in the 1.5–6 mm range, intended as an accessory for precision measuring instruments and delivered as a practical set. 60° profile for standard thread measurement Suitable for threads 1.5–6 mm Supplied as a ready set Compatible with precision measuring instruments Faster, more reliable small-thread inspection The 60° flank angle matches the common metric thread geometry, allowing direct comparison against established standards and reducing interpretation time during routine checks. Intended for use with precision measuring instruments, this measuring attachment covers 1.5–6 mm thread sizes and is supplied as a set of 10, which supports batch inspection and minimises interruptions due to tool change. The result is fewer false rejects, more consistent readings and a quicker decision process in production control. Engineered for consistent, repeatable results Constructed for compatibility with workshop metrology stands and dial or digital gauges, the accessory from Microtech Metrology is designed to produce repeatable contact geometry across multiple parts. The adherence to a 60° profile simplifies communication with machining and quality teams because it directly corresponds to the standard thread form; this reduces the need for complex conversions or secondary measurements. For users with limited metrology experience, the clear profile match means that readings are easier to interpret and integrate into inspection reports. Seamless integration into quality workflows Delivered as a complete set, the attachment enables a practical routine: keep one head mounted, use the spares for quick swaps or dedicated lines, and maintain stable throughput during longer production runs. The modular nature of the accessory supports a rational inspection strategy—dedicated tools per workcentre lower handling error and improve traceability. Combined with Metav’s supply reliability, the set supports predictable procurement and steady availability for small-thread verification tasks. For reliable small-thread inspection, request the Microtech Metrology 60° measuring attachment set via Metav Werkzeuge — Metav’s specialists can advise on compatibility and suitable gauge combinations; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to place an order or receive tailored advice Technical data Article number: 141377106T GTIN: 4061905458521 Brand: Microtech Metrology Product type: Measuring attachment for thread measurement Angle: 60° Thread range: 1.5–6 mm Set: Yes Pieces per set: 10 Key figures Angle: 60° Thread range: 1.5–6 mm Pieces per set: 10 GTIN: 4061905458521 Special features Designed for 60° metric thread profiles Supplied as a complete set for batch inspection Accessory for precision measuring instruments Facilitates quick tool swaps and consistent measurements FAQ What thread sizes can be checked with this attachment? The measuring attachment covers threads from 1.5–6 mm, enabling direct checks of small metric threads. Is the 60° profile compatible with standard metric threads? Yes, the 60° flank angle corresponds to the common ISO metric thread form used in many production environments. How is the product supplied and how many pieces are included? The item is supplied as a set; the delivery contains a set of 10 measuring heads (SKU 141377106T) from Microtech Metrology. Can this attachment be used with digital or dial gauges? The accessory is designed for compatibility with standard precision measuring instruments, allowing integration with both dial and digital gauge setups. What benefit does buying the set offer for a production line? A set of heads supports continuous operation by permitting quick swaps, dedicated tools per station and improved measurement consistency, which reduces downtime and rework. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
60° Thread Measuring Attachment for 60° Threads - Microtech Metrology
Take advantage of precise 60° geometry and compatibility with a 6 mm thread pitch to speed up routine inspections; the compact accessory delivers reproducible readings for standard thread checks. Order the item via Metav Werkzeuge or consult their specialists for application advice. Measuring attachment (Messaufsatz) by Microtech Metrology — 60° thread angle, 6 mm pitch The measuring attachment (Messaufsatz) is an accessory for precision measuring instruments, designed to check 60° thread profiles and facilitate consistent, repeatable thread inspections in workshop and quality‑control environments 60° geometry for standard thread checks Compatible with precision measuring devices Suitable for 6 mm thread pitch measurement Microtech Metrology accessory for traceable work Precise geometry for reliable thread inspection The 60° profile built into this accessory converts a general measuring device into a focused thread inspection tool, enabling fast and repeatable checks of standard metric threads. By relying on a defined geometry rather than subjective visual comparison, the module reduces variation between operators and shortens inspection cycles. Integration of a dedicated profile means that routine quality checks become faster and more consistent, supporting production throughput without altering existing measuring workflows. Practical integration with measurement equipment Designed as an add‑on for precision measuring instruments, the attachment fits into inspection processes where compactness and straightforward handling matter. The accessory is intended to sit on the instrument’s measurement face and provide a physical reference for the thread flank geometry; this compatibility reduces handling time and keeps the focus on numeric verification rather than manual estimation. The brand’s engineering focus ensures that the component interfaces cleanly with common metrology setups, improving efficiency during batch checks while keeping results traceable within established inspection routines. Suitable for standard thread pitches and routine quality control Optimised for a 6 mm thread pitch, the accessory supports the most common thread checks encountered in mechanical engineering and maintenance work. Using a dedicated thread measurement tool streamlines inspection protocols and makes results easier to document within quality systems. The accessory is therefore a pragmatic choice for workshops and inspection stations seeking a compact, reliable means to confirm thread geometry quickly, helping to reduce rework and maintain production rhythm. Contact Metav Werkzeuge to discuss the Microtech Metrology measuring attachment for 60° thread inspection and to request additional technical details or a quotation by e‑mail or phone Technical data Article number: 141377160T GTIN: 4061905458491 Manufacturer: Microtech Metrology Core data Thread angle: 60° Thread pitch: 6 mm Category: Messgeräte > Zubehör Special features Purpose: Thread measurement (60°) Accessory type: Measuring attachment Images: 141377110T-main.png, 141377110T-detail.png FAQ What is the primary use of this accessory? The measuring attachment is intended for 60° thread profile checks and, when mounted on a precision measuring device, facilitates repeatable inspection of standard metric threads; Microtech Metrology supplies the accessory under SKU 141377160T. Which thread pitches are supported by the attachment? The module is optimised for a 6 mm thread pitch and a 60° flank angle; it is therefore most suitable for routine checks of standard metric threads with those dimensions. Can this accessory be used with digital calipers or other instruments? The accessory is an add‑on for precision measuring equipment; compatibility depends on the instrument’s mounting and measurement faces—check the device interface before fitting the Microtech Metrology accessory (SKU 141377160T). How should measurement accuracy be ensured when using the accessory? Accuracy depends on correct seating and the precision of the host instrument; consistent fixturing and stable measuring conditions deliver reproducible results with the Microtech Metrology measuring attachment. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
60° Thread Measuring Attachment For Thread Angle Measurement - Microtech Metrology
Take advantage of a purpose-built 60° measuring head with a 5 mm thread pitch for reliable thread inspection; its compact accessory design speeds up checks and improves repeatability. Order the accessory via Metav Werkzeuge or consult the Metav advisors for integration guidance. Measuring Attachment — 60° thread measurement accessory by Microtech Metrology Measuring Attachment is an accessory designed to inspect 60° thread profiles on precision measuring instruments and gauges, providing a compact solution for reliable flank contact and repeatable readings. *60° geometry for ISO metric thread profiles *Designed as a precision measuring accessory *Compatible with standard measuring instruments Accurate fit for standard metric threads The 60° thread angle matches the standard metric thread profile, which ensures the measuring faces engage the thread flanks correctly and consistently. With a specified pitch of 5 mm, the accessory is configured for common metric threads, reducing interpretation errors during manual or semi‑automatic inspections. The dedicated geometry is particularly useful where correct flank contact is essential for deriving pitch diameter or verifying form, delivering a measurable improvement in inspection reliability over ad‑hoc probing methods. Faster inspection and greater reproducibility As an interchangeable head for precision gauges, this measuring element reduces set‑up time and simplifies repetitive checks. Integrating a dedicated attachment into an inspection routine leads to fewer adjustment steps and more reproducible results, supporting higher throughput in quality control tasks. The robust design and defined contact geometry contribute to consistent measurement force and positioning, which lowers measurement scatter and helps avoid unnecessary rework. Designed for workshop and laboratory workflows Manufactured by Microtech Metrology, the accessory is intended as a practical add‑on for benches or test stands that accept interchangeable measuring heads. Its compact form factor makes it suitable where space is limited, while the explicit 60° geometry ensures compatibility with ISO metric standards. For procurement and stock management the SKU 141377150T and GTIN 4061905458477 simplify ordering and traceability within existing inspection systems. Contact Metav Werkzeuge for tailored advice on integrating the Microtech Metrology measuring attachment (SKU 141377150T) into existing inspection setups or to request a procurement quote from our Emmerich warehouse Technical Data Article number: 141377150T GTIN: 4061905458477 Manufacturer: Microtech Metrology Core specifications Thread angle: 60° Thread pitch: 5 mm Category: Accessory Features & application Application: Thread measurement on precision measuring instruments Storytrigger: zubehör Categories: Messgeräte > Zubehör FAQ Which thread types is this accessory suited for? The measuring attachment from Microtech Metrology is designed for 60° thread profiles, corresponding to standard ISO metric threads; the built‑in 5 mm pitch specification targets common metric pitches. Can this accessory be fitted to existing precision gauges? The Microtech Metrology measuring attachment (SKU 141377150T) is intended as an interchangeable head for precision measuring instruments that accept swap‑in attachments; compatibility depends on the instrument interface. Does the 60° geometry comply with standard thread measurement practice? Yes — the 60° geometry corresponds to the standard metric thread flank angle and helps ensure correct flank contact for reliable inspection results. Is the accessory limited to measuring only 5 mm pitch threads? The specified pitch of 5 mm indicates the configuration supplied; different pitches require the corresponding measuring head or adapter to match the thread under inspection. What is included when ordering the attachment? Order items are delivered as the described measuring attachment; refer to SKU 141377150T and GTIN 4061905458477 in the technical data for identification and procurement. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
60° Thread Measuring Attachment For Thread Gauging - Microtech Metrology
Take advantage of the combination of precise 60° geometry, reliable pitch verification and robust industrial design for consistent thread inspection. Order the measuring attachment directly via Metav Werkzeuge or consult our specialists for integration advice. Measuring Attachment — 60° Thread‑Measurement Head by Microtech Metrology The Measuring Attachment is an accessory designed for 60° thread profile verification, ideal for integration with workshop and inspection instruments to support standard metric thread checks. 60° geometry for ISO thread measurement Fits standard measuring instruments Enables precise pitch checks (5.5 mm) Robust accessory from Microtech Metrology Accurate thread‑profile verification for routine inspection The Measuring Attachment provides a defined 60° contact geometry that matches the common metric thread profile, enabling repeatable assessment of flank form and clearance. By offering a fixed measurement angle, the accessory reduces interpretation error compared with improvised gauges, so that a single measuring set‑up yields consistent readings across batches. The clear mechanical reference makes it suitable for incoming inspection and in‑process checks where straightforward, verifiable results are required. Practical benefits when integrated into inspection workflows Fitted as an accessory to compatible gauges and comparators, the head simplifies the task of confirming thread pitch and profile without complex reprogramming of existing equipment. The specified pitch 5.5 mm can be checked directly against the profile contact, supporting fast decisions in production settings. This targeted functionality delivers a strong cost‑to‑benefit ratio: focused measurement capability with minimal additional training or fixturing, speeding routine quality checks and reducing throughput bottlenecks. Built for workshop resilience and ease of use Manufactured to industrial accessory standards, the component is designed for frequent handling and stable contact during measurement cycles. The compact form factor permits straightforward mounting and avoids unnecessary bulk on the measurement carriage, preserving instrument dynamics. As a purpose‑built attachment it contributes to lower measurement uncertainty by keeping the contact geometry fixed and reproducible, which is particularly valuable in medium‑volume production and maintenance environments. Contact Metav Werkzeuge today for advice on integrating the Microtech Metrology measuring attachment (SKU 141377155T) into the inspection setup and to place an order through our Emmerich distribution centre. Technical data Article number: 141377155T GTIN: 4061905458484 Brand: Microtech Metrology Facts Angle: 60° Pitch: 5.5 mm Category: Accessory for measuring devices Special features For thread measurement and profile checks Designed for integration with inspection instruments Robust industrial accessory suitable for routine inspection FAQ What thread profiles is this attachment intended for? The measuring attachment is designed for 60° thread profiles commonly used in metric threads and supports profile verification and pitch checks. Can the attachment check pitch 5.5 mm directly? Yes, the accessory is specified to enable direct pitch assessment for a 5.5 mm thread pitch when used with a suitable measuring instrument. Is this component compatible with all calipers and comparators? Compatibility depends on the host instrument’s mounting and geometry; the attachment is intended as an accessory for standard measuring instruments and should be checked for mechanical fit before purchase. Does the accessory require special handling or maintenance? Normal workshop care applies: keep contact faces clean and free from burrs, and store the part securely when not in use to avoid damage to the measurement geometry. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
70mm 2mm Tip Measuring Insert R0.5 x 2 x 40mm For Depth Measurements - Metav IndustryLine
Taking advantage of a precision R0.5 tip and a rigid 70 mm shank, this measuring insert provides repeatable contact in deep or recessed measurement points while remaining compact and easy to mount. Order the measuring insert directly via Metav Werkzeuge or consult Metav's specialists for application advice. Measuring insert with tip for caliper adapter – R0.5 × 2 × 40 mm, 70 mm shank (Metav IndustryLine) The measuring insert combines a fine rounded tip geometry with a 70 mm mounting shank for accurate access to deep features and a stable hold in caliper adapters. Fine rounded tip R0.5 for precise contact 70 mm shank for stable mounting Compatible with caliper adapters Suited for recessed and deep-point measurement Accuracy where access is restricted The finely formed R0.5 tip gives a small, defined contact area that reduces positional ambiguity when probing narrow bores, steps or recesses. By concentrating contact force through a small radius, the probe minimises lateral play and improves repeatability compared with blunt probes. The geometry labelled R0.5 × 2 × 40 mm indicates a tip radius of 0.5 mm with a shaft section suitable for confined spaces, making the insert particularly useful when standard jaws cannot reach. This results in faster inspection cycles and fewer rejected parts due to measurement uncertainty. Reliable mounting and workshop compatibility A 70 mm shank and Ø5 mounting interface ensure the insert seats securely in commercially available caliper adapters and fixtures. The compact mass (approx. 0.05 kg) keeps the centre of gravity close to the adapter, reducing vibration and lever effects during manual measuring operations. As an accessory for analogue calipers, the probe integrates without electronics or data output, preserving the simplicity of traditional measuring workflows while extending the application range of existing tools. The robust design supports frequent in‑shop use and straightforward replacement when wear occurs. Practical benefits for quality control and inspection Designed as a practical metrology accessory, the insert shortens set‑up time for hard‑to‑reach checks and reduces the need for special fixturing. The product is categorised as measurement accessory and is intended to complement standard caliper equipment, improving the handling of recessed surfaces without altering the primary instrument. For specific measurement tasks or compatibility checks with a particular caliper adapter, Metav IndustryLine technical staff can provide guidance on fit and suitability to ensure the insert meets inspection requirements. Contact Metav Werkzeuge today to confirm adapter compatibility and arrange supply from Emmerich for prompt delivery and expert advice Technical data Article number: M240.321 GTIN: 4054469159546 Category: Accessory (measuring devices) Type: Analogue measuring insert Core measurements Shank length: 70 mm Mounting diameter: Ø5 mm Tip geometry: R0.5 × 2 × 40 mm Weight: 0.05 kg Customs tariff: 90178090 Design and features Intended use: Deep/recessed point measurement Compatibility: Caliper adapters (analogue) Construction: Probe tip and shaft for adapter mounting Delivery form: Single insert, accessory item FAQ What is the intended use of this insert? The measuring insert is intended for deep or recessed point measurements where standard caliper jaws cannot reach; it fits into caliper adapters to extend measurement capability. Which calipers or adapters are compatible with the insert? Compatibility depends on the adapter's mounting interface; the insert uses a Ø5 mm shank and is suitable for common caliper adapters designed to accept this diameter. Is the tip suitable for contact with soft surfaces? The R0.5 rounded geometry is small and precise; it reduces indentation risk compared with sharper probes but care is advised on very soft materials to avoid surface marking. Can the insert be used with digital calipers? The insert is a mechanical accessory; it can be used with calipers that accept the Ø5 shank, including digital models that have suitable adapters, but the insert itself provides no electronic output. How does the insert affect measurement repeatability? By providing a defined contact radius and a stable 70 mm shank, the probe improves positional consistency for recessed features, supporting more repeatable results in routine inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
70mm Digital Caliper Narrow Jaws Metal Body 30mm x 20° Resolution 0.01mm Three-Point, Includes Case - Metav IndustryLine
Compact 70 mm digital caliper combines 0.01 mm resolution with a hardened stainless steel construction for reliable, repeatable checks on small components. The narrow 30 mm jaw and four measurement functions enable precise work in confined spaces while the metal housing protects the electronics during daily use. Order or request advice via Metav Werkzeuge for supply and application guidance. Digital Caliper 70 mm – Narrow‑Jaw, Hardened Stainless Metal Housing (Metav IndustryLine) The Digital Caliper 70 mm is a compact, workshop‑grade measuring tool for precise external, internal, depth and step measurements on small parts and assemblies. 0.01 mm digital resolution Hardened stainless steel construction Narrow 30 mm jaw for confined spaces External, internal, depth and step measurement Precision in a micro format for small assemblies This caliper belongs to the micro measurement class (measurement range up to 10–100 mm) and is engineered for tasks where compactness meets accuracy. With a display resolution of 0.01 mm (approx. 0.0005 in) the instrument is suitable for standard inspection and quality control work on micro parts, tooling and fine mechanical components. The digital readout with mm/inch toggle and zero function reduces reading errors compared with analogue scales and speeds up repetitive checks, supporting consistent throughput in production checks or bench inspection. Robust design that endures workshop use Constructed from hardened stainless steel with a protective metal housing, this caliper is designed to resist corrosion and everyday wear. The narrow jaw geometry (30 mm × 20°) enables access to tight grooves and small features that standard jaws cannot reach, improving measurement access without compromising stiffness. At approximately 0.18 kg the instrument is lightweight enough for handheld operation yet rigid enough for repeatable results. The tool is supplied in a protective transport case to prevent damage during storage and transit. Fast, unambiguous measuring for efficient workflows The integrated digital electronics include an ON/OFF function, mm/inch selector and a zeroing key for quick set‑ups and relative measurements. Four measurement functions—external, internal, depth and step—cover the common checks required on small parts, reducing the need for multiple gauges. The compact footprint and clear display speed up inspection cycles and lower the risk of transcription errors, contributing to a smoother quality process and better productivity on the shop floor. For reliable micro‑range measurements choose Metav IndustryLine and contact Metav Werkzeuge for procurement and specification advice directly from Emmerich. Technical Data Article number: M240.016.1 GTIN: 4054469163109 Category: Calipers (measuring instruments) Facts Measurement range: 0–70 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.18 kg Jaw length: 30 mm / 14 mm Tariff number: 90173000 Special features Material: hardened stainless steel with metal housing Digital display with ON/OFF, mm/inch and zero Four measurement functions: external, internal, depth, step Supplied in protective transport case Narrow jaw geometry 30 mm × 20° FAQ What accuracy can be expected from this caliper? The caliper has a display resolution of 0.01 mm; this level of resolution is typical for standard digital calipers used in workshop quality control. Which measurements can be performed with the instrument? External, internal, depth and step measurements are all supported, covering the common inspection tasks for small parts. Is this caliper suitable for confined or narrow features? Yes. The narrow jaw (30 mm) and slim profile allow access to tight grooves and small features that standard jaws struggle to reach. What material is the caliper made from? The body is manufactured from hardened stainless steel and finished with a protective metal housing for enhanced durability and corrosion resistance. Does this item include a transport case? The instrument is supplied in a protective case suitable for transport and storage. Which brand and SKU identify this product? This is the Digital Caliper 70 mm from Metav IndustryLine, SKU M240.016.1. Hersteller: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-575 mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, Big Screen Swiss Electronics, kalibriert nach ISO 17025 - Microtech Metrology
Nutzen Sie die Kombination aus ISO 17025‑Kalibrierung, robustem IP 67‑Schutz und großem Messbereich für präzise und reproduzierbare Messungen. Bestellen Sie den Messschieber direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Messschieber von Microtech Metrology (Digitaler Messschieber) Der Messschieber ist ein digitaler Präzisionsschieber für reproduzierbare Außen‑ und Innenmessungen an mittelgroßen bis großformatigen Bauteilen. Messschieber von Microtech Metrology Big Screen Swiss Electronics Anzeige IP 67 Schutz gegen Staub und Wasser Messbereich 75–575 mm für große Werkstücke Kalibrierzeugnis nach ISO 17025 inklusive Präzision dank Kalibrierung und feinster Ablesung Die hochwertige Elektronik liefert eine Ablesung von 0,01 mm und eine geprüfte Genauigkeit ±0,05 mm, was verlässliche Messwerte in der Fertigung und Qualitätssicherung sichert. Durch die ISO 17025‑Kalibrierung wird das Messgerät mit einem Kalibrierzeugnis ausgeliefert; das bedeutet direkte Einsetzbarkeit in Prüfprozessen ohne zeitaufwändige Eigenkalibrierung. Für Anwender, die reproduzierbare Toleranznachweise benötigen, sorgt diese Kombination aus Auflösung und Kalibrierzertifikat für klare Entscheidungsgrundlagen. Robustheit für raue Werkstattbedingungen Der Schieber ist nach IP 67 geschützt, wodurch Staubdichtigkeit und kurzzeitiges Untertauchen gewährleistet sind; das erhöht die Lebensdauer unter widrigen Bedingungen. Mit einem maximalen Messbereich von 575 mm gehört das Werkzeug zur Klasse Mit Gross, also geeignet für großformatige Komponenten in Rohr‑ und Behälterbau sowie in der Schwerzerspanung. Diese Bauart verbindet ausreichende Reichweite mit der nötigen Profilsteifigkeit für reproduzierbare Längenmessungen. Lesbarkeit und Handhabung optimieren den Workflow Die Big Screen Swiss Electronics‑Anzeige bietet klare Ziffern und reduziert Messfehler durch schlechte Ablesbarkeit; das vereinfacht schnelle Prüfabläufe an der Fertigungsstraße. Das digitale Interface unterstützt einfache Null‑Setzung und Umrechnungseinheiten, wodurch Einmessungen beschleunigt werden. Für Werkstattmitarbeiter bedeutet das: weniger Suchen, mehr Messzyklen pro Schicht und damit höhere Prozessstabilität. Einsatzfelder und Empfänger dieses Messgeräts Dieses digitale Messgerät richtet sich an Qualitätsprüfstellen, Maschinenbau‑Betriebe und Montagewerkstätten, die präzise Messungen an mittelgroßen und großen Bauteilen durchführen. Typische Anwendungen sind Außen‑ und Innenmessungen an Spannmitteln, Aufnahmen und Gehäusen sowie die Nutzung als Nachweisgerät in Prüfberichten. Die robuste Ausführung macht das Instrument zudem tauglich für den Einsatz in anspruchsvollen Fertigungsumgebungen. Empfehlung: Für sofort einsatzbereite Präzision empfehlen wir den Erwerb des kalibrierten Microtech Metrology Messschiebers über Metav Werkzeuge; bei technischen Fragen oder Beratungsbedarf erreichen Sie uns per eMail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Produktmerkmale Artikelnummer: 141305153 Marke: Microtech Metrology Bezeichnung: Messschieber GTIN: 4061905452543 UID: 141305153 Fakten Ablesung: 0,01 mm Genauigkeit: ±0,05 mm Messbereich: 75–575 mm IP Schutz: IP 67 Besonderheiten Digitale Anzeige: Big Screen Swiss Electronics Kalibrierung: ISO 17025, Kalibrierzeugnis IP 67: Schutzklasse gegen Staub und Wasser Einordnung Messbereich: Mit Gross (500–1 000 mm) Digitales Messgerät FAQ Ist der Messschieber kalibriert geliefert? Ja, der Microtech Metrology Messschieber wird nach ISO 17025 kalibriert ausgeliefert und enthält ein Kalibrierzeugnis, sodass das Gerät sofort in Prüfabläufen eingesetzt werden kann. Welche Auflösung und Genauigkeit bietet das Messgerät? Die Anzeige unterstützt eine Ablesung von 0,01 mm; die geprüfte Genauigkeit beträgt ±0,05 mm, wodurch es für viele Fertigungs‑ und Prüfaufgaben geeignet ist. Eignet sich das Instrument für Außenmessungen an großen Werkstücken? Ja, mit einem Messbereich bis 575 mm und der Einordnung Mit Gross ist der Schieber für Außenmessungen an größeren Bauteilen ausgelegt. Welche Anzeige‑Technologie ist verbaut? Es ist die Big Screen Swiss Electronics‑Anzeige verbaut, die für gute Lesbarkeit und schnelle Messabläufe konzipiert ist. Welche SKU hat das Produkt für die Bestellung? Die Artikelnummer für Bestellungen lautet 141305153; bitte diese Nummer bei Anfragen an Metav Werkzeuge angeben. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
750mm Electronic Scale With Ø41mm Magnifier, Carbon Body, mm/inch Display, Proximity Output, Supplied In Case - Metav IndustryLine
Take advantage of a carbon beam for high stiffness, a digital display with mm/inch and preset, and Proximity data output for simple integration into inspection routines; these features combine to deliver reliable, fast large-format measurement and traceable results. Order the measuring device directly via Metav Werkzeuge or consult our specialists for application advice. M838.716 measuring scale — Carbon beam with digital display The M838.716 is an electronic measuring scale designed for large-format workshop and inspection tasks, combining a rigid carbon profile with a clear digital readout and proximity data output for integration into quality workflows. Carbon beam for high stiffness and low weight Digital display with mm/inch and preset functions Resolution 0.01 mm with ±0.03 mm accuracy Proximity data output for inspection systems Large-beam measurement tailored for heavy components This measuring device is engineered for the 500–1,000 mm large-beam category, offering a measurement range 0–750 mm that suits oversized fixtures, housings and components commonly found in machine and plant construction. The carbon construction keeps the instrument stiff while limiting mass, which helps to reduce deflection over the measuring span and enables consistent readings. The combination of a long, rigid beam and a compact carriage supports repeatable linear measurements without excessive operator effort, improving throughput during routine checks and batch inspection. Precise digital readout and system-ready data transfer Equipped with a digital display that switches between mm/inch and includes Reset/Preset keys, the scale offers a clear, immediate readout and straightforward datum handling. The unit delivers a resolution of 0.01 mm and a stated accuracy of ±0.03 mm, making it suitable for workshop-level quality control and assembly inspection. The Proximity data output provides a simple, contactless interface for feeding measurement values into inspection software or data-loggers, reducing transcription errors and speeding up documentation. Power is supplied by a single CR2023 battery, ensuring dependable on-bench operation with minimal maintenance. Practical handling and inspection support for everyday use A large magnifier Ø41 mm mounted on the carriage helps with fine alignment of scale marks and improves usability under workshop lighting, while the instrument’s overall length 1,020 mm and weight 1.9 kg balance reach and manoeuvrability for single-person handling. The design emphasises reduced operator influence on results: clear mechanical guidance and a high-contrast electronic display cut reading time and lower the chance of mistakes. Backed by Metav IndustryLine’s quality filter and broad product range, this scale supports a pragmatic route to consistent measurements across production and service departments. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine M838.716 measuring scale with Proximity data output can be integrated into existing inspection processes and quality documentation workflows. Technical data SKU: M838.716 GTIN: 4061905449055 Manufacturer: Metav IndustryLine Facts Measurement range: 0–750 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Overall length: 1,020 mm Weight: 1.9 kg Power: 1x CR2023 Special features Carbon beam construction Digital display with mm/inch and Reset/Preset Proximity data output Integrated magnifier Ø41 mm FAQ What measurement range does the scale cover? The M838.716 measuring scale covers a range of 0–750 mm, placing it in the 500–1,000 mm large-beam class for sizeable components. How precise is the readout on this instrument? The unit provides a resolution of 0.01 mm and an accuracy of ±0.03 mm, suitable for workshop-quality control and assembly checks. Can the digital output be integrated into inspection software? Yes, the Proximity data output on the M838.716 allows straightforward integration with data-loggers and inspection systems to automate measurement capture. What power source is required for the display? The display is powered by a single CR2023 battery, offering reliable on-bench operation and simple replacement. Is there any feature to aid fine alignment during measurement? An integrated magnifier with a diameter of Ø41 mm assists alignment of scale marks and improves readability for precise placement. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Digital Brake Disc Caliper Long Measuring Probe Hold Function Stainless Steel - Metav IndustryLine
Take advantage of its stainless steel construction, long 32 mm probe and digital readout with Hold to measure brake-disc thickness precisely and reproducibly; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital Brake-Disc Caliper M240.182 — long-probe digital caliper, 0–80 mm, Metav IndustryLine The Digital Brake-Disc Caliper M240.182 is a long-probe digital caliper designed for quick, reliable measurement of brake-disc thickness in workshop and garage environments. Long 32 mm measuring probe for recesses Hardened stainless steel construction Digital display with Hold and Zero functions Supplied in protective transport case Precision where it matters: repeatable brake-disc checks The long-probe digital gauge is optimised for brake disc measurement, offering a measuring span of 0–80 mm that falls into the micro-range for compact, high-precision calipers. With a display resolution of 0.01 mm and the specified reading accuracy of 0.05 mm, the instrument gives a verifiable numerical result that supports maintenance decisions and quality control routines. The hardened stainless steel frame maintains profile rigidity during repeated use, reducing measurement drift and ensuring consistent results across serial inspections. Built for workshop use: robustness and handling benefits Corrosion-resistant, hardened stainless-steel construction provides durability in everyday workshop conditions while keeping the instrument balanced at 0.44 kg. The extended probe (32 mm) accesses recessed braking surfaces and caliper housings without the need for disassembly, which reduces inspection time and risk of handling damage. The compact form factor and tactile slide enable single‑hand operation, so technicians can complete checks faster with fewer interruptions to the service workflow. Practical digital functions that save time and prevent errors The instrument features a clear digital display with ON/OFF, UNIT, HOLD and ZERO keys for straightforward operation and immediate data capture. The HOLD function secures readings when access is awkward; ZERO allows relative measurements for thickness loss compared with reference points. An integrated RB 5 data output is available for logging measurements or transferring values to a workshop database, simplifying traceability and documentation where required. Supplied in a protective transport case, the caliper is ready for safe storage and mobile use. Choose the Metav IndustryLine M240.182 for dependable brake-disc measurement and contact Metav Werkzeuge in Emmerich for tailored advice via info@metav-werkzeuge.com or on +49 2822 7131930 Technical data Article number: M240.182 GTIN: 4061905038341 Brand: Metav IndustryLine Material: hardened stainless steel Measuring range: 0–80 mm Resolution: 0.01 mm Indicated accuracy: 0.05 mm Probe length: 32 mm Weight: 0.44 kg Power supply: 3 V Data output: RB 5 Facts Measuring range max: 80 mm Display increments: 0.01 mm Net weight: 0.44 kg Probe length: 32 mm Voltage: 3 V Tariff number: 90173000 Special features Designed for brake disc measurement Digital display with ON/OFF, UNIT, HOLD, ZERO Hardened stainless-steel construction Long measuring probe for recessed areas Supplied in protective transport case RB 5 compatible data output FAQ How accurate is the measurement with this caliper? The Metav IndustryLine digital brake-disc caliper provides a display resolution of 0.01 mm and the specified reading accuracy of 0.05 mm for practical workshop checks. Can the caliper record measurements electronically? Yes, the M240.182 includes an RB 5 data output for connection to logging equipment or a workshop PC to simplify traceability and record keeping. Is the instrument suitable for mobile workshop work? The caliper is supplied in a protective transport case and its hardened stainless-steel construction plus 32 mm probe make it well suited to mobile inspections and routine garage use. What makes this caliper suitable specifically for brake discs? The long probe and compact measuring span allow access to recessed braking surfaces and provide repeatable thickness readings tailored to brake-disc inspection procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90mm Precision Caliper Curved Jaws, Locking Screw - Metav IndustryLine
Compact, corrosion‑resistant construction and a simple locking lever deliver repeatable results for precision micro‑work; combined with a fine 0–90 mm measuring range and 0.1 mm reading, this instrument streamlines small‑part inspection and assembly. Order directly via Metav Werkzeuge or consult our specialists for application advice. Caliper M201.007 — precision caliper, 0–90 mm range, 0.1 mm resolution (Metav IndustryLine) The Caliper M201.007 is a compact precision tool for specialist fine‑mechanical measurements, designed for external and depth checks where small jaws and a light, stiff frame make handling and repeatable readings straightforward Compact 0–90 mm measuring range 0.1 mm reading for quick verification Stainless steel construction for durability Curved measuring jaws for small contours Locking lever for repeatable measurements Precise micro‑measurements with clear benefits This caliper offers a 0–90 mm measuring range classified as micro, which is ideal where reach is limited but stiffness and precision are essential. The 0.1 mm vernier reading provides a straightforward, verifiable value for common inspection tasks; as an analogue instrument it requires no batteries and gives immediate, tactile feedback. The stainless steel construction resists workshop environments while the curved jaws allow secure contact on small or rounded components, reducing the need for supplementary fixtures and saving set‑up time. Designed for consistent workflow and easy handling A low mass of around 0.1 kg and a compact jaw length of 23 mm make the instrument easy to manoeuvre in one hand during repetitive checks. The integrated locking lever fixes the slider for transfer measurements and repeatability, turning individual readings into reproducible data points on the shop floor. For quick depth checks and external measurements the simple scale and clamp arrangement reduce operator variation, improving throughput without complex procedure changes. Practical applications and workshop suitability Classified for micro measurement work, this caliper suits fine‑mechanical workshops, small component inspection and specialist production tasks that value compactness over long reach. The curved tips help when measuring small bores or contours, while the robust stainless construction supports daily use. As a dedicated verification tool for short spans, it complements larger calipers in a metrology kit and serves as a reliable go‑to for routine dimensional checks. For precision micro‑work choose the Metav IndustryLine Caliper M201.007 — contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M201.007 GTIN: 4054469183206 Weight: 0.1 kg Material: stainless steel Measuring range: 0–90 mm Resolution: 0.1 mm Jaw length: 23 mm Special feature: locking lever Jaw tips: curved Facts Measuring range max: 90 mm Measuring range min: 0 mm Resolution/display: 0.1 mm Weight: 0.1 kg Jaw length: 23 mm Special features Suitable for external and depth measurements Curved measuring jaws for small contours Stainless steel construction Category: Special caliper Range class: Micro (max 10–100 mm) FAQ What accuracy can be expected from this caliper? The Caliper M201.007 from Metav IndustryLine provides a vernier reading at 0.1 mm resolution, suitable for reliable shop‑floor verification and everyday dimensional checks. Which measurement types are possible with this instrument? External and depth measurements are supported by the design; the curved jaws also assist with measurements on small contours and rounded features. Is the caliper resistant to corrosion in a workshop environment? Yes, the stainless steel construction of the Caliper M201.007 offers good resistance to typical workshop conditions and frequent handling. Does the instrument include a calibration certificate? This product is supplied without an ISO 17025 calibration certificate by default; specific calibration services can be arranged separately if required. What advantages does the locking lever provide in routine use? The locking lever fixes the slider for transfer and repeat measurements, improving repeatability and reducing operator‑induced variation during inspection runs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M2-30 Gear Tooth Caliper With Fine Adjustment, Digital Readout 0.01mm, Stainless Hardened, Supplied In Case - Metav IndustryLine
Take advantage of the combination of 0.01 mm resolution, hardened stainless steel construction and a fine-adjustment spindle for repeatable, production-ready gear inspections; order the instrument directly via Metav Werkzeuge or ask our consultants for specification support. Digital gear-tooth caliper M240.111 – Digital readout with fine adjustment for modules M2–M30 (Metav IndustryLine) The Digital gear-tooth caliper M240.111 is a specialist measurement instrument designed for quick and reliable checks of gear tooth widths and clearances on modules M2–M30, suited to workshop inspection, maintenance and component verification. Digital readout with mm/inch and zero function Fine adjustment for controlled, repeatable contact Fully hardened stainless steel construction Resolution 0.01 mm / 0.0005 in display Consistent, reproducible gear measurements with fine control Measuring gear tooth widths demands both resolution and steady contact. The instrument combines a digital display with a fine-adjustment spindle that permits slow, controlled closure of the jaws; this reduces operator variability and helps to achieve reproducible results on successive parts. With a display step of 0.01 mm (0.0005 in) the device supports routine acceptance tests and process checks where micro-scale differences in tooth thickness affect gear meshing and noise. The instrument’s design translates measurement data into actionable pass/fail decisions faster than manual gauges, improving throughput and reducing rework. Built to withstand the workshop – stable and corrosion-resistant A measuring tool must stay accurate under daily use. Constructed from fully hardened stainless steel, the caliper resists wear, maintains jaw geometry and stands up to workshop conditions where lubricants, coolant mist or handling are present. The hardened material ensures long-term dimensional stability, which in turn preserves measurement traceability across inspection sequences. For organisations that rely on repeat measurements for assembly or incoming inspection, the robust build reduces the need for frequent mechanical adjustment and keeps measurement uncertainty low over time. User-friendly digital features for efficient documentation Practical operation speeds up inspection routines: the instrument’s digital readout offers on/off control, a mm/inch toggle and a zero function for incremental measurements, enabling rapid checks without complex setup. The compact display format makes readings clear in confined inspection benches, while the fine-adjustment control allows sensitive approach to the tooth flank. These features help inspectors record consistent values and integrate results into quality logs more reliably than analogue alternatives, supporting faster decision-making on the shop floor. Where this caliper delivers value in production and servicing The instrument is optimised for small to medium gear components, pinions and sprockets within the M2–M30 module range, commonly found in precision drives, small gearboxes and toolmaking tasks. By combining a high-resolution readout with mechanical fine adjustment and hardened construction, the tool reduces measurement-related uncertainty and shortens cycle time for repeat inspections. The result is improved component interchangeability and fewer assembly issues stemming from incorrect tooth profiles or inconsistent clearances. For specification advice or to secure the Metav IndustryLine digital gear-tooth caliper (M240.111) directly, contact Metav Werkzeuge for tailored delivery and technical guidance Technical data Article number: M240.111 GTIN: 4054469112831 ECLASS: 21170344 TARIC / HS code: 90173000 Label: Digital gear-tooth caliper, M2–30 with fine adjustment Numbers / Core technical data Resolution: 0.01 mm Resolution (inch): 0.0005 in Measuring range: M2–M30 Jaw length: 30.5 mm Special features / Design Material: fully hardened stainless steel Digital display: on/off, mm/inch, zero Fine adjustment: for controlled closing FAQ How accurate is the instrument for gear tooth measurements? The caliper offers a display resolution of 0.01 mm (0.0005 in) and a fine-adjustment spindle for controlled contact, which supports reproducible width measurements and reliable comparative checks across series. Which gear sizes and modules can be inspected? Modules from M2 up to M30 are covered, making the device suitable for small to medium gears, pinions and similar transmission components within that module range. Is the construction suitable for daily workshop use? Yes. The caliper is made from fully hardened stainless steel, providing wear resistance and dimensional stability under routine handling in production and maintenance environments. What digital functions are available on the display? The instrument includes on/off control, a mm/inch toggle and a zero function to permit incremental measurements and straightforward data reading during inspection workflows. Does the data sheet specify any certification or calibration status? The product data does not list a supplied calibration certificate or an ISO 17025 calibration; the available specification focuses on construction, display functions and measuring range. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M5-50 Tooth Gauge Digital Caliper With Fine Adjustment, 0.01mm Resolution, Stainless Hardened, Supplied In Case - Metav IndustryLine
Take advantage of the combination of digital readout, fine-adjustment control and hardened stainless-steel construction for repeatable gear-tooth measurements and efficient quality checks. Order the unit directly via Metav Werkzeuge or consult the Metav team for specification advice and delivery from Emmerich. Digital Gear Tooth Caliper M5–50, fine adjustment — Metav IndustryLine The Digital Gear Tooth Caliper M5–50 is a specialised digital caliper designed for precise measurement of gear tooth widths and small profiles, suitable for workshop quality control and maintenance tasks. Digital display with mm/inch and zero Fine-adjustment thumb screw for precise setting Hardened stainless-steel construction 0.01 mm resolution for consistent readings Faster, measurable inspection results The caliper combines a clear digital display with a standard 0.01 mm resolution, enabling rapid, reproducible readings that shorten inspection cycles. The integrated mm/inch toggle and zero function simplify comparative checks and part-to-part verification, while the fine-adjustment mechanism allows controlled approach to contact points, reducing overshoot and measurement errors. These technical advantages translate into fewer reworks and a steadier production flow for small-series and maintenance jobs. Robust build for regular workshop use Manufactured from fully hardened stainless steel, the instrument resists shop-floor wear and maintains measurement geometry under typical handling. The compact jaw geometry, including a jaw length of 50.5 mm, provides access to narrow tooth spaces and small gears without sacrificing stiffness. The fine-adjustment thumb screw improves repeatability when setting the caliper on gear flanks, while the robust construction contributes to long service intervals and predictable performance in routine quality-control stations. Practical fit for inspection and repair tasks Designed for targeted gear inspection, the caliper supports quick checks during set-up, maintenance and incoming-parts inspection. The instrument’s control set (ON/OFF, mm/inch, ZERO) reduces training time and avoids ambiguity in recorded values, making it suitable for both craftspeople and shop-floor metrology. With its clear readout and precise adjustment, the tool aids process stability and decision-making in small-batch production environments. For precision gear measurement with Metav IndustryLine quality, contact Metav Werkzeuge in Emmerich for consultation and reliable supply from stock. Technical data Article number: M240.112 GTIN: 4054469112848 ECLASS: 21170344 Tariff number: 90173000 Measuring range: M5-50 Digital: yes Display functions: ON/OFF, mm/inch, ZERO Material: stainless steel, fully hardened Core specifications Resolution (display): 0.01 mm / 0.0005 in Jaw length: 50.5 mm SKU: M240.112 Features and materials Fine-adjustment thumb screw Digital readout with mm/inch and zero Hardened stainless-steel construction Intended for gear-tooth width and small-profile measurements FAQ What accuracy can be expected from this caliper? The caliper delivers a display resolution of 0.01 mm, which provides reliable repeatability for routine workshop and inspection tasks using the digital readout. Is the instrument suitable for measuring narrow gear tooth spaces? Yes, the combination of compact jaws and a 50.5 mm jaw length is intended to reach into narrow gear profiles while maintaining stiffness for consistent readings. Which display functions are available on the device? The unit features ON/OFF control, mm/inch conversion and a zero button to support comparative measurements and easy set-up of reference points. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Magnifying Glass With Standard Template - Metav IndustryLine
The practical combination of clear optics and a handheld format supports efficient close inspection and routine visual checks in workshop and quality-control environments. Benefit from Metav IndustryLine consistency and traceability when integrating this tool into inspection workflows. Order the magnifier directly via Metav Werkzeuge or ask our consultants if needed. Magnifier M905.180 — handheld inspection magnifier by Metav IndustryLine Magnifier M905.180 is a compact handheld inspection tool designed for close visual checks and simple quality-control tasks across workshops and service benches. Handheld design for close inspection Clear optics for enlarged detail Metav IndustryLine build quality Faster, more reliable close inspection with clear optics The M905.180 supports visual tasks where detail matters: surface checks, printed-mark verification and component inspection. Its handheld format enables quick positioning and steady observation, reducing the need for repetitive handling during routine checks. Clear magnification assists in recognising fine defects and surface irregularities, improving throughput in inspection steps while maintaining visual comfort for repeated use. Durable design that suits workshop routines Constructed to be easily handled on the shop floor, this inspection tool combines everyday usability with a design that withstands regular handling. The association with Metav IndustryLine signifies consistent sourcing and a focus on availability for industrial customers. The compact form simplifies storage on tool boards or in inspection kits, supporting a reliable workflow without introducing complex maintenance requirements. Practical integration for quality-control processes As a straightforward optical aid, the magnifier assists operators and technicians in verifying small details quickly, shortening non-value-adding time spent at inspection stations. The tool complements measuring equipment and visual gauges by offering an immediate, low-effort method to confirm markings, labels or minor surface flaws. Its simplicity makes it suitable as a standard item in workshops, service departments and production lines where rapid visual validation is needed. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine magnifier M905.180 can be added to workshop inspection kits; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M905.180 GTIN: 4061905450068 Brand: Metav IndustryLine Facts No numerical specifications provided Special features Handheld magnifier for inspection and reading Compact design for quick visual checks FAQ What is the intended use of this magnifier? The Metav IndustryLine magnifier M905.180 is intended for close visual inspection, simple quality-control checks and reading small details in workshop and service environments. Which identification numbers belong to the product? The item is listed as SKU M905.180 with GTIN 4061905450068 for catalogue and inventory purposes. Is the magnifier part of a larger product range? Yes, the tool is supplied under the Metav IndustryLine brand, reflecting availability within a broad selection of workshop and measurement equipment. Are optical power or dimensions specified for this magnifier? No numerical specifications for optical power or dimensions are provided in the available product data Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø5 Internal Groove Measuring Insert From 15 mm, Max Depth 1.4 mm Width 1.2 mm - Metav IndustryLine
The compact measuring insert combines a secure Ø5 mm shank connection with a slim profile for reliable inspection of internal grooves from 15 mm; the defined 1.4 mm maximum depth and 1.2 mm width deliver repeatable results and reduced rework. Take advantage of the insert’s precise fit and quick mounting to maintain steady production flow. Order the M240.325 directly via Metav Werkzeuge or ask our consultants if needed. M240.325 Internal-groove measuring insert for caliper adapters — 1.2 mm width, 1.4 mm depth (Metav IndustryLine) A M240.325 internal-groove measuring insert designed for use with caliper adapters, suitable for internal grooves from 15 mm with a maximum depth of 1.4 mm and a width of 1.2 mm. Precision-ground insert for internal grooves Designed for grooves from 15 mm diameter Max depth 1.4 mm, width 1.2 mm Faster, repeatable internal-groove inspections The measuring insert is engineered to speed up routine checks while keeping results consistent. Fitted on a caliper adapter, the Ø5 mm shank secures the insert in the holder so measurements are taken with minimal play, improving repeatability and lowering measurement scatter. The clearly defined 1.4 mm depth limit and 1.2 mm width make it straightforward to confirm compliance for narrow grooves, which reduces the need for rework and shortens inspection cycles on the shop floor. Designed for tight grooves and reliable fit A slim profile and precisely machined contact faces ensure the insert reaches confined internal features without damaging edges. The geometry is optimised for internal keyways and narrow channels starting at 15 mm, providing a firm seating against the groove flanks and improving reading stability. Where speed of inspection matters, the insert’s design permits quick engagement and withdrawal from the groove, enabling efficient quality control on assemblies and components. Workshop integration that keeps production moving As an accessory for caliper adapters, this insert integrates directly into existing digital or analogue calipers equipped with compatible holders, avoiding the need for a separate specialised gauge. Lightweight at approximately 0.05 kg and with a compact 70 mm overall length, it is easy to store and swap between tasks. The insert supports a pragmatic inspection workflow: defined limits, secure mounting and rapid handling translate into lower inspection times and more predictable throughput for repetitive measurements. Contact Metav Werkzeuge for application advice or to secure spare inserts for Metav IndustryLine products: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M240.325 GTIN: 4054469159577 Weight: 0.05 kg Length: 70 mm Shank diameter: Ø5 mm Max. measuring depth: 1.4 mm Width: 1.2 mm Facts Suitable groove start: from 15 mm diameter Category: Accessory (measuring devices) SKU: M240.325 ECLASS: 21170324 Special features For internal grooves / keyways Mounts on caliper adapters Compact, lightweight design Ideal for narrow, shallow grooves FAQ What groove sizes can be measured with this insert? The insert is intended for internal grooves starting at 15 mm diameter and is specified for a maximum depth of 1.4 mm and width of 1.2 mm; this makes it suitable for narrow keyways and similar features. Is the insert compatible with digital and analogue calipers? Yes. The M240.325 mounts via a Ø5 mm shank into standard caliper adapters, so it can be used with both digital and analogue calipers that accept the compatible holder. How does the insert improve measurement repeatability? Secure mounting and precise contact geometry reduce movement and operator influence, resulting in more consistent readings and improved repeatability during series inspections. Can the insert be used for external measurements or other tasks? This insert is specifically designed for internal groove inspection and is supplied for use with caliper adapters; external measurements require suitably configured jaws or other dedicated inserts. What is the weight and size of the insert for handling and storage? The insert weighs approximately 0.05 kg and measures 70 mm in length, offering a compact, lightweight solution that is simple to handle in the workshop. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision where standard calipers reach their limits
Specialised calipers (also available as specialist calipers and precision calipers) are engineered for measurements that conventional calipers cannot perform reliably. With custom‑shaped jaws, extended measuring ranges and advanced materials, these tools deliver reproducible results down to the micrometre range, making them indispensable for difficult‑to‑access features such as fine grooves, deep bores and complex contours.
How these calipers tackle demanding measurement tasks
Specialised calipers work by adapting jaw geometry and sensing technology to the application: pointed, blade‑shaped, round or offset jaws capture inside and outside dimensions in confined geometries, while digital, analogue and inductive sensing cover different shop and lab requirements. Digital variants offer quick readouts and data transfer via Bluetooth/USB; analogue models remain reliable in humid or rough workshop environments; inductive versions provide extreme accuracy of ±0.001 mm (1 μm), suited to inspection rooms and laboratories. Wear‑resistant materials such as carbide or ceramic tips withstand coolants, abrasion and corrosion for sustained accuracy.
Measurable benefits for production and inspection
- Faster, repeatable measurements in constrained geometries, reducing inspection time.
- Reproducible results to the micrometre range, raising process reliability.
- Longer service life thanks to carbide or ceramic tips, lowering tool replacement frequency.
- Seamless data integration: digital specialised calipers can feed results directly into CAQ systems via Bluetooth/USB, supporting inline quality control.
- Robust performance across environments—from workshop floors to clean labs—thanks to analogue and inductive options.
Metav as a dependable partner for precision measurement
Metav combines decades of expertise with a comprehensive selection for industry, craft and trade. From Emmerich, Metav operates as a quality filter for the European market, supplying high‑precision tools across more than 250,000 product lines. Trusted by over 48,000 customers, Metav makes high accuracy accessible to every workshop while ensuring reliable fulfilment and consistent product quality.
FAQ
What accuracy can I expect from specialised calipers?
Inductive specialised calipers achieve extreme accuracy of ±0.001 mm (1 μm); digital models enable quick readout and transfer, while analogue versions provide reliable shop‑floor stability.
Which jaw shapes are available and what are they best for?
Specialised calipers come with pointed, blade‑shaped, round and offset jaws designed to measure features such as wall thickness of glass ampoules, gear tooth profiles and O‑ring grooves that standard calipers cannot access.
Can specialised calipers be used for inline quality control?
Yes. Digital specialised calipers with Bluetooth/USB support direct data transfer to CAQ systems, enabling inline testing and automated documentation in series production.
Are there variants suited to harsh workshop environments?
Analogue specialised calipers are less sensitive to moisture and rough handling, and units fitted with carbide or ceramic tips resist coolants, abrasion and corrosion for durable, accurate performance.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com