Precision specialist calipers for inaccessible measurements
Specialist calipers are engineered to measure fine grooves, deep bores and complex contours with reproducible accuracy down to the micrometre, delivering reliable results where standard calipers reach their limits. Designed with customised jaw shapes and robust materials such as carbide or ceramic tips, these calipers excel in measuring thin-walled aerospace structures, medical implants and intricate toolroom cavities while resisting coolants and abrasion. Available as digital, analogue and inductive variants, they offer options from quick-read displays and data transfer to extreme accuracy of ±0.001 mm for laboratory use. By combining tailored jaw geometries with durable construction, these precision tools improve inline quality control and support both prototype and series production.
55° Thread Measurement Adapter BSW 55° Angle - Microtech Metrology
Benefit from precise BSW 55° profiling and a defined pitch 4 mm for consistent thread inspection; the compact accessory delivers repeatable results for metrology benches and inspection rigs. Order the Measuring Attachment directly via Metav Werkzeuge or ask our consultants if needed. Measuring Attachment (BSW 55°) — Thread measurement accessory, Microtech Metrology The Measuring Attachment (BSW 55°) is a precision accessory for thread profile inspection, designed for metrology use where the British Standard Whitworth 55° form and a pitch of 4 mm must be verified reliably. BSW 55° thread profile compatibility Pitch reference 4 mm for consistent checks Compact metrology accessory for inspection benches Microtech Metrology manufactured quality Reliable measurement of Whitworth thread form The attachment is engineered to reference the BSW 55° profile directly, so thread angles are measured against a standard geometry rather than inferred from related dimensions. This approach reduces interpretation error and makes the accessory suitable for repeatable inspections where the 55° flank angle is critical. The primary benefit is clear: faster pass/fail assessments of Whitworth-threaded components while maintaining traceability to a defined profile. Clear pitch reference for efficient inspection routines With a specified pitch 4 mm, the unit provides an immediate physical reference for thread pitch checks, simplifying routine control procedures in production or quality assurance. Integrating this accessory into a measuring setup shortens setup time and lowers the risk of incorrect pitch interpretation, which contributes to a smoother workflow and fewer rework cycles. The measurable pitch value means inspection records can be correlated directly to the part specification. Compact format that supports standard metrology workflows Designed as an accessory for inspection equipment, the component’s compact footprint keeps the setup stable without requiring extensive fixture changes. The modest dimensions assist in retaining instrument rigidity during contact measurement and help maintain reproducible probe engagement. This results in reliable single-operator checks and consistent data capture across multiple parts or inspection rounds. Built for dependable use in workshop and laboratory environments Manufactured by Microtech Metrology, the accessory emphasises durability and dimensional fidelity. The construction focuses on maintaining the reference geometry under routine handling and integration, which supports long-term measurement stability. The moral appeal here is straightforward: a component made to professional standards that helps reduce uncertainty and supports quality assurance processes across small and larger-scale production settings. Contact Metav Werkzeuge for tailored advice on integrating the Microtech Metrology measuring attachment into existing inspection setups and to confirm delivery from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 141377207T GTIN: 4061905458804 Name: Measuring Attachment Manufacturer: Microtech Metrology Category: Accessory (metrology instruments) Facts Angle: 55° Pitch: 4 mm Special features Designed for BSW 55° thread profile measurement Intended as an accessory for inspection and metrology benches Compact reference geometry for repeatable checks FAQ What thread profile does this attachment support? The Measuring Attachment supports the British Standard Whitworth profile with a 55° flank angle, providing a direct geometric reference for BSW inspections. How is pitch specified for this accessory? The unit carries a defined pitch 4 mm reference, enabling straightforward verification of thread pitch during inspection routines. Can the attachment be integrated into existing metrology setups? Integration is intended for common inspection benches and metrology instruments; the accessory from Microtech Metrology is compact and designed for straightforward adaptation into established workflows. Is this accessory suitable for production control and laboratory use? Yes. The Measuring Attachment is manufactured to meet the durability and dimensional fidelity expected in both workshop production control and laboratory inspection contexts. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Adapter BSW 55°, - Microtech Metrology
Take advantage of a purpose-built measuring accessory that ensures reliable inspection of Whitworth profiles through its 55° geometry and defined pitch 8 specification; the combination of repeatable profile matching, compact handling and simple integration supports consistent quality control workflows. Order directly via Metav Werkzeuge or consult the team for compatibility advice. Measuring attachment BSW 55° — Thread measuring accessory by Microtech Metrology A compact measuring attachment, Measuring attachment BSW 55°, designed for precision inspection of Whitworth (BSW) thread profiles and suitable for use in metrology setups and accessory stations. BSW 55° geometry for Whitworth threads Precision 55° thread angle Designed for precision measuring setups Precise thread profile verification for consistent results The attachment is engineered to reproduce the classic BSW 55° flank geometry, enabling clear profile verification in standardised inspections. By matching the nominal thread angle, the device simplifies comparative checks against reference gauges and drawing data, reducing interpretation errors during visual or optical inspection. The compact design supports easy mounting and stable positioning in accessory holders, which contributes to consistent repeatability in routine checks and small-batch quality control. Streamlined inspection workflow for thread production and maintenance Integration of this accessory into an inspection station reduces handling steps compared with manual profile templates. The defined pitch 8 specification clarifies the nominal thread spacing to be inspected and assists in selecting the correct comparator or measuring procedure, shortening setup time and lowering the chance of incorrect gauge selection. The attachment is therefore well suited to environments where efficiency and traceability matter, for example workshop testing, incoming goods inspection and on-machine verification tasks. Built for metrology compatibility and traceable documentation As an accessory classified for metrology use, the unit is supplied with clear identification data that supports traceability within inspection protocols. Compatibility with established accessory interfaces allows the measuring attachment to be combined with optical comparators and standardised inspection stands, delivering a pragmatic solution for laboratories and industrial workshops that require documented, verifiable checks of Whitworth thread forms. The straightforward feature set keeps calibration and routine checks manageable within existing quality systems. For precision Whitworth thread inspection and integration support, contact Metav Werkzeuge in Emmerich for technical advice and procurement assistance from the local Metav team Technical data Article number: 141377202T GTIN: 4061905458613 Manufacturer: Microtech Metrology Model name: Messaufsatz BSW 55° Measurements / Core data Thread angle: 55° Pitch: 8 Category: Accessory SKU: 141377202T Special features / Application Designed for Whitworth (BSW) thread profile inspection Compact accessory for metrology and inspection setups Intended for integration with measuring stations and comparators FAQ What thread standard is this attachment designed for? The measuring attachment is configured for the Whitworth profile (BSW) with a 55° flank angle, allowing direct profile comparison and inspection. Can the accessory be used for threads other than BSW? Measurements are optimised for the BSW 55° geometry; using the unit for other thread standards would require verification that the flank angle and pitch are compatible. Which pitch does the attachment correspond to? The device is specified for pitch 8, which should be matched to the component thread before inspection to ensure correct assessment. Is this part supplied by the manufacturer Microtech Metrology? Yes, the attachment is provided by Microtech Metrology and is listed under article number 141377202T for identification and traceability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Adaptor, BSW 55° - Microtech Metrology
Take advantage of a purpose-built accessory that matches the 55° Whitworth profile and the 5 mm pitch for reliable thread verification; the result is fewer rework cycles and faster batch acceptance. Order the matching item directly via Metav Werkzeuge or consult our specialists for integration advice. Measuring attachment — 55° BSW thread profile, 5 mm pitch (Microtech Metrology) The Measuring attachment is a precision accessory for verifying 55° Whitworth (BSW) threads in metrology workflows and inspection stations 55° profile suited to BSW thread measurement Compatible with 5 mm thread pitch Precision accessory for metrology instruments Manufacturer Microtech Metrology Accurate thread-profile verification to reduce rework The accessory provides a defined 55° profile that matches the geometry used for Whitworth (BSW) threads, allowing straightforward verification of flank form and basic pitch conformity. By using a dedicated profile head the inspection task becomes repeatable: a consistent contact geometry lowers the risk of false rejections and shortens decision times in the control loop. The measurable 5 mm pitch is supported directly by the geometry, which helps to identify mismatches between component and specification at an early stage. Designed for integration into inspection routines This accessory has been produced by Microtech Metrology as a metrology spare part and is intended to integrate with instrument-based inspection setups. The defined profile simplifies comparison against thread standards during incoming inspection or in-process checks, enabling faster throughput without sacrificing traceability. Where production flow demands rapid checks, the attachment reduces the need for time-consuming manual gauging while keeping the inspection process comparable and documentable. Support for quality systems and supplier confidence As a component within a calibrated inspection chain, the measuring head contributes to reproducible results and clearer pass/fail decisions. When combined with sound measurement procedures and consistent fixturing, it supports adherence to internal quality plans and external supply requirements. Metav’s positioning as a precision partner means the accessory is supplied via a distributor with broad industry experience and a large catalogue, which helps to streamline procurement and ensures availability for routine operations. Secure the Microtech Metrology 55° BSW measuring attachment through Metav Werkzeuge for reliable thread verification — contact the Emmerich team for technical matching and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141377205T GTIN: 4061905458781 Manufacturer: Microtech Metrology Facts Profile angle: 55° Thread pitch: 5 mm Category: Metrology accessory Special features Intended for BSW (Whitworth) thread measurement Accessory for metrology instruments SKU: 141377205T FAQ Which thread form does this attachment inspect? The attachment inspects Whitworth (BSW) threads using a defined 55° profile suitable for the specified application and pitch. Is the accessory suitable for the 5 mm pitch? Yes — the geometry of the measuring head corresponds to a 5 mm thread pitch and is intended for verification tasks that reference that pitch. Can this part be used with other metrology systems? The accessory is supplied by Microtech Metrology and is designed as a precision spare for metrology instruments; compatibility depends on the receiving instrument’s accessory interface and fixturing. Does the head replace traditional go/no-go gauges in production? It supplements standard gauging by enabling instrument-based profile checks; when used within a controlled measurement procedure it reduces manual handling and supports faster quality decisions. How does the 55° Whitworth profile differ from metric threads? Whitworth threads use a 55° flank angle, whereas ISO metric threads use a 60° flank angle; this attachment is therefore specific to BSW geometry and not suitable as a substitute for metric thread checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Attachment BSF 55° Angle For Thread Gauging - Microtech Metrology
Take advantage of the combination of accurate flank-angle verification and compact metrology integration for reliable thread inspection; the 55° flank geometry and compatibility with a 6 mm pitch support reproducible checks in production and QA. Order the measuring attachment directly via Metav Werkzeuge or ask the consultants for application advice. Measuring Attachment — Thread Measurement Accessory (55° flank angle, 6 mm pitch) by Microtech Metrology The Measuring Attachment is a compact inspection accessory intended for precise verification of thread profiles with a 55° flank angle, well suited to measuring tasks that require a defined 6 mm pitch. Thread measurement at 55° flank angle Suitable for 6 mm thread pitch Designed for precision metrology instruments Manufactured by Microtech Metrology Accurate verification where flank form matters This attachment performs targeted thread measurement using a defined 55° flank geometry, which is essential when the profile angle determines fit and function. By referencing the flank angle rather than relying on visual gauges, the accessory provides a repeatable datum for comparative checks, reducing subjective interpretation. The clear specification of a 6 mm pitch enables direct assessment of lead and form; in practice, this translates into fewer false rejects and faster decision-making on the shop floor. Fast integration into inspection routines Built as an accessory for metrology setups, the unit is intended for quick mounting and alignment in routine checks, shortening setup times and improving throughput. The measuring head concept keeps handling steps minimal and supports consistent positioning across batches, so inspection cycles become more predictable and efficient. For production-centric environments this means a clearer pass/fail outcome per component and fewer process interruptions. Reliability tailored to workshop conditions Produced under the Microtech Metrology label, the accessory is engineered with industrial use in mind; the construction and tolerances reflect expectations for metrology tooling. Its role as an inspection adaptor ensures that profile checks are repeatable under typical workshop conditions, which helps avoid rework and downstream assembly issues. The focus on precision and robustness supports sustained measurement performance across repeated cycles. Practical benefits for quality assurance Implementing this accessory into a measurement routine provides a measurable contribution to quality assurance: reduced inspection variability and a tighter control of thread geometry mean fewer warranty claims and improved component interchangeability. Used as part of a documented inspection procedure, the measuring head helps demonstrate that thread geometry was verified against a defined flank angle and pitch, strengthening audit evidence and supplier verification processes. Contact Metav Werkzeuge for tailored advice on integrating this Microtech Metrology thread measurement accessory into existing inspection workflows—call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability and delivery options Technical Data Article number: 141377216T GTIN: 4061905458859 Manufacturer: Microtech Metrology Category: Accessory Intended use: Thread inspection Angle: 55° Thread pitch: 6 mm Facts Angle: 55° Pitch: 6 mm SKU: 141377216T GTIN: 4061905458859 Special features Accessory for thread measurement Designed for metrology inspection setups Compact measuring head format Brand: Microtech Metrology FAQ What is the primary use of this accessory? The measuring attachment is intended for thread measurement where a defined 55° flank angle and a 6 mm pitch must be verified; it serves as an inspection adaptor for comparative checks. Which thread pitch does the accessory support? The unit is specified for a 6 mm pitch and for profile verification based on a 55° flank geometry, allowing direct checks of pitch and flank conformity. Which instruments can accept this attachment? The accessory is designed for use in standard metrology inspection setups and with compatible measuring heads and fixtures commonly used in workshop and QA environments. How does this attachment improve inspection reliability? By providing a defined flank-angle reference and consistent positioning, the accessory reduces subjective measurement error, improves repeatability and streamlines pass/fail decisions during quality control. How can the product be identified in procurement and inventory systems? Identification: SKU 141377216T, GTIN 4061905458859, Manufacturer Microtech Metrology Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Attachment BSW 4–9 TPI Set, 7 Pieces - Microtech Metrology
Take advantage of the precise 55° thread profile, the coverage of 4–9 TPI and the practical set format to speed up in‑process checks and reduce rework. Order the accessory directly via Metav Werkzeuge or consult the Metav specialists for application advice. Measuring Attachment BSW 55° — Thread measurement accessory with 4–9 TPI, set of 7 (Microtech Metrology) The Measuring Attachment BSW 55° is a precision accessory for thread inspection, designed to verify British Standard Whitworth (BSW) profiles across the common 4–9 TPI range in workshop and inspection routines 55° BSW thread profile Covers 4–9 TPI range Supplied as a set of 7 inserts Faster, standard-compliant thread checks that reduce downtime The 55° thread profile built into this insert matches the Whitworth geometry commonly used on imperial fasteners; this ensures measurements reflect the real mating profile rather than an approximation. With a 4–9 TPI range included in the set, the insert bundle covers the most frequently encountered coarse and medium BSW pitches, which streamlines incoming inspection and first‑off checks. By using a dedicated thread measurement insert instead of improvised gauges, the inspection routine becomes more repeatable and less prone to subjective interpretation, lowering the risk of scrap and unscheduled rework. Practical set design for quick exchange and consistent results Delivered as a set of 7, the package supplies a compact selection of inserts that can be rotated or replaced as wear occurs, extending effective service life without complex maintenance. The set format supports efficient shop‑floor workflows: thread checks can be completed faster at the bench or on a measuring instrument, and repeatability is improved because each insert conforms to the same 55° profile. Where traceable records are required, the defined set composition simplifies documentation and parts control in quality management processes. Seamless fit with metrology routines and production quality control As an accessory intended for metrology use, the insert set integrates with standard inspection stations and thread‑measuring fixtures, helping to maintain throughput during batch sampling and final inspection. The clear definition of thread profile and pitch range assists technicians in selecting the correct check quickly, which in turn supports consistent process capability and fewer line stops. For procurement and inventory, the SKU and GTIN support straightforward traceability back to the supplier and batch information. For reliable BSW thread inspection choose Microtech Metrology's Measuring Attachment BSW 55°—order via Metav Werkzeuge or contact their consultants at Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich; phone +49 2822 7131930; info@metav-werkzeuge.com for specification matching and availability Technical data SKU: 141377200T GTIN: 4061905458811 Manufacturer: Microtech Metrology Facts Angle: 55° TPI range: 4–9 TPI Pieces per set: 7 Special features BSW thread profile for Whitworth checks Accessory for thread measurement instruments Supplied as a set of inserts Category: accessory for metrology equipment FAQ What thread pitches are included with the insert set? The insert set covers the 4–9 TPI range, allowing verification of the most common BSW pitches with the Measuring Attachment BSW 55° from Microtech Metrology. Is the insert suitable for Whitworth (BSW) thread forms? Yes, the insert is manufactured to the 55° Whitworth geometry and is intended specifically for BSW thread measurement applications using the measuring attachment. How does the set help in a production quality process? Supplied as a set of 7, the Measuring Attachment BSW 55° allows quick exchange of worn inserts and consistent checks, supporting repeatable inspection results and smoother production sampling. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Attachment BSW 55° - Microtech Metrology
Take advantage of the combination of dependable thread profiling, a 55° flank angle and a clear pitch value of 9 to standardise inspection routines and reduce rework. Order the accessory directly via Metav Werkzeuge or consult the Metav team for integration advice. Thread measuring attachment BSW 55° – 55° thread profile (Microtech Metrology) The Thread measuring attachment BSW 55° is a precision accessory for inspecting British Standard Whitworth threads with a 55° flank angle, designed for workshop and inspection use 55° flank angle for BSW thread profiles Designed for precise thread assessment Compatible with standard measuring instruments Supplied by Microtech Metrology, reliable Accuracy tailored to BSW inspection The accessory was developed specifically to assess BSW thread geometry by referencing the characteristic 55° flank. Fitting the correct profile ensures that pitch and flank form are checked against the expected geometry rather than inferred from general gauges. This results in more consistent pass/fail outcomes during production checks and shorter calibration cycles for inspection equipment. The clearly defined pitch value of 9 is recorded in the specification, supporting traceable documentation and efficient part classification. Faster metrology workflows through clear compatibility Designed as an add-on for existing thread inspection setups, the attachment integrates with common metrology stands and comparators, enabling quicker sampling and fewer instrument changes. The straightforward profile fit reduces setup time between different thread types and simplifies measurement sequences, which increases throughput in workshop inspection. The practical benefit is reduced process interruptions and a simpler route from measurement to decision, helping teams keep projects on schedule. Built for repeatable workshop performance Constructed to withstand regular use in shop-floor environments, the accessory prioritises dependable contact geometry and handling ergonomics. That durability supports repeatability across multiple checks and operators, so measurement scatter is reduced even in routine inspections. The result is a reliable tool for quality control traces in manufacturing or refurbishment contexts, where reproducible thread assessment is essential for assembly integrity. For purchasing and integrating the Microtech thread measuring attachment, contact Metav Werkzeuge in Emmerich on +49 2822 7131930 or info@metav-werkzeuge.com to discuss delivery options and compatibility with existing inspection equipment Technical Data Article number (SKU): 141377201T GTIN: 4061905458361 Manufacturer: Microtech Metrology Specifications Angle: 55° Pitch: 9 Special features Intended for BSW 55° thread measurement Accessory for thread gauges and measuring instruments Product images and detail files available FAQ What thread form does the attachment check? The thread measuring attachment checks the BSW thread form with a 55° flank angle and is specified for assessment of that profile. Which manufacturer produces this accessory? This attachment is produced by Microtech Metrology and is listed under SKU 141377201T. Is the pitch indicated in the specification? Yes, the specification records a pitch value of 9 for reference when classifying or documenting threads. Can the accessory be used with standard measuring stands? The accessory is designed for compatibility with common measuring instruments and stands used in workshop inspection. What information is provided for traceability? The product listing includes GTIN 4061905458361 and the SKU 141377201T for traceability in procurement and quality records. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Attachment BSW, For 55° Thread Form - Microtech Metrology
Take advantage of the combination of precise 55° flank geometry, compatibility with standard BSW pitches (4.5 mm) and a compact accessory form that keeps thread checks reproducible and efficient. Order the measuring attachment directly via Metav Werkzeuge or ask our consultants if needed. Measuring attachment — BSW 55° thread measurement accessory by Microtech Metrology Measuring attachment for rapid, repeatable inspection of BSW threads using a 55° flank angle; intended as an accessory for metrology instruments and gauges. Precision 55° flank geometry for BSW threads Compatible with 4.5 mm thread pitch Accessory for metrology instruments Reliable geometry for reproducible thread checks The accessory is engineered around the 55° flank angle required for BSW (British Standard Whitworth) threads, ensuring that contact occurs at the correct flank geometry and that measurement results are consistent across repeated checks. With a defined thread pitch 4.5 mm, the attachment aligns interrogation points so that a measurement system records the effective profile rather than artefacts from misaligned contact. This technical design reduces setup iterations and contributes to faster cycle times in incoming inspection and quality checks. The result is a measurable increase in repeatability and a lower likelihood of false rejects during batch verification. Seamless integration with metrology equipment Designed as an accessory for dial gauges, digital comparators or bench measuring fixtures, the attachment fits into existing inspection workflows without extensive modification. The compact interface and secure mounting promote stable contact during measurement sequences, which is particularly important when integrating with height gauges or bench comparators used in calibration labs and production testing. By providing a dedicated contact geometry for BSW threads, the component removes the need for improvised adapters and helps to standardise procedures for thread verification in the workshop and laboratory environment. This integration capability supports efficient quality assurance and shortens setup times for repeat inspections. Practical advantages for workshop and laboratory use As a specialised metrology accessory, the unit brings clear practical benefits: consistent contact geometry lowers operator influence, a repeatable pitch reference simplifies pass/fail decisions, and the accessory’s form factor keeps handling straightforward during routine checks. The part is best applied where BSW thread forms are present on components that require fast verification during assembly or final inspection. The compromise between focused functionality and simple handling is aimed at service departments, toolrooms and inspection benches that demand dependable results with minimal overhead. Built as a precision accessory by Microtech Metrology, the attachment supports structured inspection routines and contributes to a traceable quality record when used as part of an established measurement process. For precise BSW thread verification trust Microtech Metrology accessories—contact Metav Werkzeuge for procurement and technical consultation via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 141377206T GTIN: 4061905458798 Manufacturer: Microtech Metrology Facts Angle: 55° Thread pitch: 4.5 mm Category: Accessory for measuring instruments Special features Designed for BSW 55° thread measurement Intended as an accessory for metrology instruments and gauges Supplied as a precision measuring attachment for thread inspection FAQ What thread form is this attachment designed for? This attachment is designed specifically for BSW (British Standard Whitworth) threads using a 55° flank angle, providing the correct contact geometry for reliable checks. Which thread pitch does the accessory match? The accessory aligns to a thread pitch of 4.5 mm, matching common BSW specifications and enabling consistent profile interrogation. Can the accessory be used with digital comparators and height gauges? Yes. The attachment is intended as an accessory for metrology instruments and can be integrated with comparators and gauges used in inspection workflows. Who manufactures this measuring attachment? The measuring attachment is produced by Microtech Metrology and supplied as a precision accessory for thread inspection. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Attachment For 55° Thread Angle - Microtech Metrology
The combination of a true 55° profile and suitability for BSF/Whitworth threads ensures reliable verification of classic thread forms while reducing rework and inspection time; the attachment is matched to a 4.5 mm pitch for targeted measurements. Order the measuring attachment directly via Metav Werkzeuge or ask our consultants if needed. Measuring Attachment BSF 55° – Thread measuring attachment, 55° profile (Microtech Metrology) The Measuring Attachment BSF 55° is a precision accessory for comparative and profile-based thread inspection, designed to verify 55° BSF/Whitworth thread forms and intended for use with precision comparators and gauges 55° profile for BSF/Whitworth thread measurement Designed for 4.5 mm thread pitch verification Compatible with Microtech Metrology gauges Reliable profile control for classical thread standards The attachment provides a 55° flank geometry that matches the traditional BSF/Whitworth thread form, allowing straightforward verification of profile conformity. By offering a defined contact geometry for the flank faces, the device reduces interpretative errors during visual or comparator-assisted inspection. The controlled contact and dedicated geometry convert profile assessment into a repeatable, comparable measurement, which supports faster decisions in incoming inspection and in-process checks while maintaining documented traceability. Smooth integration with precision comparators and gauges Manufactured to interface with standard comparator fixtures, the accessory ensures simple mechanical compatibility with established measurement rigs from Microtech Metrology and similar systems. The matching to a 4.5 mm pitch makes it suitable for the specific BSF sizes where that pitch applies, avoiding over-generalisation and ensuring that the tool is used where it delivers best accuracy. The design prioritises robust seating and repeatable orientation so that each measurement cycle begins from the same reference, enabling consistent results across shifts and operators. Practical advantages for workshop and quality control applications With a focus on measurement efficiency and trustworthy verification, this thread measuring solution helps to reduce non‑conforming parts progressing through production. The defined profile contact simplifies operator training and shortens inspection times, which benefits both small toolrooms and larger quality departments. Where documentation is required, the attachment supports clear pass/fail decisions and can be combined with comparator readings for recorded evidence. The result is improved process stability and fewer returns or reworks due to thread-profile deviations. Contact Metav Werkzeuge to discuss specification matching or to order the Microtech Metrology measuring attachment with 55° profile for precise BSF thread verification Technical data Article number: 141377218T GTIN: 4061905458873 Brand: Microtech Metrology Numbers / Core technical data Angle: 55° Pitch: 4.5 mm SKU: 141377218T Special features / Applications Application: thread profile measurement (BSF/Whitworth) Function: profile verification for comparator-based inspection Category: accessory for measuring devices FAQ What thread form does this attachment check? The measuring attachment checks the BSF/Whitworth thread form by providing a matched 55° profile for comparator or gauge verification. Which thread pitch is the attachment intended for? This accessory is configured for a 4.5 mm thread pitch, making it suitable for BSF sizes that use that pitch specification. Is the attachment compatible with other gauge systems? The attachment is designed for mechanical compatibility with precision comparators and similar gauge fixtures and is produced by Microtech Metrology for reliable interfacing. Can this attachment be used for production testing and incoming inspection? Yes; the attachment supports both incoming inspection and in‑process profile checks to speed decision making and reduce rework. Which model or article number should be referenced when ordering? Reference article number 141377218T and the Microtech Metrology measuring attachment with 55° profile when enquiring or ordering. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Attachment For BSF Threads - Microtech Metrology
Take advantage of a compact, purpose-built measuring attachment that delivers precision for thread inspection; the 55° flank angle and defined pitch 5 mm make it a practical accessory to speed up checks and reduce rework. Order the measuring attachment directly via Metav Werkzeuge or consult our specialists for application advice. Measuring attachment BSF 55° — Thread-measuring attachment, 55° angle (Microtech Metrology) The Measuring attachment BSF 55° is a precision accessory for thread inspection, engineered for use with measuring instruments and gauges to assess 55° thread profiles and a nominal pitch of 5 mm. Precision 55° angle for ISO threads Designed for thread measurement applications Accessory compatible with Microtech Metrology devices Robust construction for repeatable readings Accurate flank geometry for reliable thread inspection The attachment provides a defined 55° flank geometry that aligns with common 55° thread profiles, enabling consistent contact with the flank during inspection. By fixing the angle and reference geometry, the component reduces operator-induced variation and supports more reliable pass/fail decisions during visual or tactile checks. This level of precision shortens inspection cycles and lowers the risk of rework caused by ambiguous readings, making the workflow measurably more efficient. Integration into existing metrology processes and improved throughput As an accessory intended for use with established measuring instruments, the head integrates into standard test setups without elaborate adjustments. Its purpose-built form facilitates quick mounting and repeatable positioning, so inspections can be carried out with stable reference points and repeatable readings. The result is an increase in throughput for batch checks and a reduction in cumulative measurement uncertainty, which benefits quality management and production planning by improving first-pass yield. Applications, suitability and assurance for workshop and lab use Suitable for quality control, workshops and metrology departments, this measuring head supports inspection of threaded components where a pitch of 5 mm and a 55° profile are present. The accessory concept is particularly useful where a dedicated thread-measuring head streamlines routine checks and reduces handling time compared with ad‑hoc methods. Combined with Metav’s European distribution and technical support, the solution delivers the reassurance of consistent availability and pragmatic expertise for professional users. For tailored advice or to secure the BSF 55° measuring attachment from Microtech Metrology, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 for prompt, expert support Technical data Article number: 141377217T GTIN: 4061905458866 Manufacturer: Microtech Metrology Facts Angle: 55° Pitch: 5 mm Category: Accessory for measuring instruments Special features Intended use: Thread measurement (55° profile) Delivery form: Measuring attachment accessory Application context: Quality control and workshop inspection FAQ What thread profile is the attachment designed for? The attachment is designed for a 55° thread profile and is intended to support thread measurement tasks with that flank geometry. Can the measuring attachment be used with other brands of gauges? The head is supplied by Microtech Metrology as an accessory for measuring instruments; compatibility depends on the instrument interface and mounting provisions of the gauge used. Does the attachment specify a thread pitch? Yes, the accessory is specified with a pitch indication of 5 mm, suitable for components that use this nominal spacing. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Attachment For Screw Gauge, 55° Profile - Microtech Metrology
Take advantage of precise 55° profile fidelity, compatibility with 11 TPI threads and robust construction for dependable thread inspection; order the measuring attachment directly via Metav Werkzeuge or consult our specialists for tailored advice. Measuring attachment BSF 55° – Thread measuring accessory (Microtech Metrology) A measuring attachment BSF 55° for precise inspection of British Standard Fine threads and routine thread-control tasks on comparators and gauge fixtures BSF 55° thread profile compatibility Suitable for 11 TPI thread pitches Precision metrology accessory for comparators Faster, more reliable thread inspection in production This accessory speeds up inspection routines by providing a dedicated contact geometry for BSF profiles. Fitting a dedicated profile head reduces setup time and eliminates repeated manual alignment, which increases throughput in quality control. The unit’s geometry is designed to reproduce the 55° flank angle consistently, helping to keep measurement scatter low and make pass/fail decisions quicker. Its focus on repeatable contact conditions supports efficient sampling for batch inspection and reduces rework rates in production. Designed specifically for BSF 55° profiles and 11 TPI pitches Engineered to match the British Standard Fine profile, the attachment is tailored for threads with 11 TPI, ensuring the correct flank angle and pitch engagement during measurement. This reduces the risk of misinterpretation that can occur when generic probes are used. The technical adaptation for the 55° form means the accessory can be used as a reliable reference when checking thread form and lead, giving a precise mechanical interface between the workpiece and the measuring instrument. For workshops that inspect British-standard components, this translates into clear, comparable results across multiple parts and operators. Built for integration, traceability and workshop use The accessory is suitable for mounting on common comparator and gauge setups, offering straightforward mechanical integration so inspection lines remain productive. Its robust design supports repeated use in workshop environments while maintaining measurement integrity. Where traceability is required, the accessory can be recorded as part of an inspection setup, aiding process documentation and quality systems. Combining precision geometry with easy fitting improves operator confidence in routine checks and contributes to a steady workflow in both small repair shops and larger inspection departments. Contact Metav Werkzeuge today for specification support and reliable delivery from Emmerich — our specialists will advise on compatibility with existing comparators and gauge systems Technical Data Article number: 141377211T GTIN: 4061905458354 Brand: Microtech Metrology Facts Angle: 55° Pitch: 11 TPI Category: Accessories Special features For thread inspection of BSF 55° profiles Designed for use with comparators and measuring instruments Intended for routine workshop and metrology use FAQ What thread form does this attachment support? The attachment is made for the BSF 55° thread form and reproduces the correct flank angle for reliable inspections. Is this accessory compatible with 11 TPI threads? Yes, the measuring head is specified for 11 TPI pitches and engages the profile accordingly for accurate checks. Can the accessory be mounted on standard comparators? The accessory is designed for integration with common comparator and gauge fixtures used in workshop inspection setups. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Head Attachment BSW 55° - Microtech Metrology
Take advantage of a purpose-built accessory that combines the 55° thread flank geometry with a 7 mm nominal pitch to deliver consistent thread profile checks; order the measurement attachment directly via Metav Werkzeuge or consult our specialists for application support. Measurement attachment (BSW 55°) — thread measurement accessory by Microtech Metrology Measurement attachment for metrological thread inspection, designed to replicate the 55° Whitworth flank for reliable thread form checks in workshops and inspection benches. 55° Whitworth geometry for thread profiles Designed for 7 mm nominal pitch verification Precision probe for metrological inspection Precise thread-form matching for reliable results The accessory matches the 55° flank angle common to Whitworth-style threads and the 7 mm pitch indicated in the technical data, so the contact geometry corresponds to the standard form rather than approximating it. This direct correspondence reduces interpretation errors during profile checks and makes dimension comparisons more reliable. The result is faster, more objective decisions in production control and quality assurance where repeatability matters. Built to integrate into existing measurement routines As a metrology accessory, the unit is intended for simple integration with thread inspection workflows. Its compact design keeps handling time low and reduces fixturing adjustments, which streamlines throughput in workshop and laboratory environments. By aligning the probe geometry with the thread form, the device shortens inspection sequences and supports consistent logging of inspection outcomes for traceable quality records. Practical choice for workshop and laboratory use The accessory is suited to routine thread verification and batch inspection of components where Whitworth geometry is present. The clear specification of angle and nominal pitch helps planners select the correct probe for the task, avoiding misfits that can cause rework or false rejects. Sourcing the part from an experienced precision partner adds supply reliability and helps maintain a stable inspection capability on the shop floor. For precise Whitworth thread checks, request Microtech Metrology’s 55° thread measurement attachment via Metav Werkzeuge — our team in Emmerich can advise on suitability and deliver quickly; eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: 141377203T GTIN: 4061905458620 Manufacturer: Microtech Metrology Facts Angle: 55° Nominal pitch: 7 mm Special features Category: Accessory (Zubehör) Application: thread measurement Product name: Measurement attachment FAQ What thread angle does the accessory check? The accessory checks a 55° flank angle, matching the Whitworth-style profile specified for this measurement attachment. Is the attachment suitable for a 7 mm pitch thread? Yes. The device is specified for a 7 mm nominal pitch, making it appropriate for thread forms that use this pitch. Can the accessory be used on standard metrology heads? The accessory is designed as a metrology attachment for thread inspection and is compatible with measurement workflows that accept accessory probes; confirm mounting interface with the measuring head before purchase. What is the item reference for ordering? Order reference: Microtech Metrology measurement attachment, SKU 141377203T, GTIN 4061905458620. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Head For Three-Point Thread Gauging - Microtech Metrology
Take advantage of the precise BSF 55° profile and defined 4 mm thread pitch to standardise thread checks and shorten inspection cycles; order the adapter directly via Metav Werkzeuge or consult the Metav specialists for integration advice. Measuring attachment — BSF 55° thread measurement adapter by Microtech Metrology (55° angle, 4 mm pitch) A Measuring attachment designed for BSF 55° thread inspection, serving as an accessory for precision measuring instruments and workshop metrology. BSF 55° geometry for accurate thread checks Suitable for 4 mm thread pitch measurements Compatible with Microtech Metrology measuring systems Accurate profile verification without guesswork The measuring head offers a dedicated BSF 55° contact geometry that converts a visual or manual check into a repeatable, measurable action. By matching the thread angle precisely, the adapter reduces ambiguity in profile assessment and helps to maintain consistent inspection criteria across batches. The defined 4 mm pitch further narrows the tolerance band during evaluation, so measurement routines can be standardised and documented for quality control purposes. This focused functionality makes the accessory particularly useful where reliable pass/fail decisions are needed quickly. Designed for straightforward integration and repeatability Engineered as an accessory for established metrology equipment, the adapter mounts cleanly to compatible measuring systems, preserving instrument geometry and minimising setup time. The robust contact design improves positional stability during measurement, which in turn enhances repeatability and reduces operator influence on results. Where traceability and documented inspection routines are important, the adapter supports efficient data capture when used with instruments that accept accessory inputs, thereby contributing to a smoother quality workflow. Benefit-driven performance for production and inspection Implementing a purpose-built thread measurement adapter streamlines inspection sequences and reduces rework by catching non-conforming threads early. The specialised construction targets the critical parameters of BSF-form threads—angle and pitch—so measurements are meaningful for both engineering verification and workshop acceptance. Where throughput matters, this accessory helps to balance speed with technical confidence, enabling teams to maintain output without compromising documented measurement integrity. Practical considerations for workshop use The adapter is supplied as a ready-to-fit accessory from Microtech Metrology and is intended for use in conjunction with compatible measuring devices. Its compact footprint and defined geometry make it suitable for bench-top metrology stations and modular inspection fixtures. Where multiple thread types are present in a production environment, keeping dedicated adapters avoids repeated adjustments and supports a more ergonomic inspection routine for operators. Contact Metav Werkzeuge today for technical matching or to reserve the Microtech Metrology BSF 55° measuring attachment — the Metav team in Emmerich will advise on compatibility and supply options Technical Data Article number: 141377219T GTIN: 4061905458880 Manufacturer: Microtech Metrology Angle: 55° Pitch: 4 mm Category: Accessory (Zubehör) Facts 55° thread profile 4 mm thread pitch SKU: 141377219T Brand: Microtech Metrology Special features BSF 55° geometry for thread measurement Accessory for precision measuring systems Compact measuring head for bench inspection FAQ What thread profile does the adapter check? The adapter is configured for the BSF 55° thread profile and is intended for verification of that specific angle. Which thread pitch is supported by this accessory? The accessory is set up for a 4 mm thread pitch, matching the data supplied for the adapter. Is the adapter compatible with other measuring instruments? The adapter is compatible with measuring systems that accept accessory measuring heads and is supplied by Microtech Metrology for integration with such devices. How does this accessory improve inspection routines? By providing a defined 55° contact geometry and a fixed pitch reference, the adapter increases repeatability and shortens setup time in routine checks. What identification is used for ordering and traceability? Order or reference the adapter using Article number 141377219T and GTIN 4061905458880 for clear traceability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Probe BSF For Thread Gauging - Microtech Metrology
Take advantage of a stable 55° thread profile and a defined pitch 8 to secure reproducible BSF thread inspections; combine precise profile control with easy integration into inspection benches for faster throughput. Order the measuring attachment directly via Metav Werkzeuge or consult the Metav team for application advice. Thread measuring attachment "BSF 55°" — 55° profile for BSF threads, pitch 8 — Microtech Metrology The Thread measuring attachment "BSF 55°" is a precision accessory designed to verify 55° BSF (Whitworth) thread profiles in workshop and laboratory measuring setups. 55° BSF profile for accurate thread checks Compatible with pitch 8 measurements Precision accessory by Microtech Metrology Accurate profile verification for BSF threads The attachment provides a fixed 55° profile tailored to the Whitworth/BSF thread form, enabling repeatable profile checks without iterative adjustment. By matching the geometry of the thread form, the accessory reduces measurement variability and supports consistent pass/fail decisions during quality control. The design focuses on precision and straightforward use, so inspection cycles are shorter and results are easier to interpret in production and testing environments. Easy integration with existing measurement equipment Engineered as a retrofittable metrology accessory, the unit offers mechanical compatibility with standard thread inspection fixtures and measuring benches. Installation requires minimal alignment, which accelerates setup and reduces downtime between measurement tasks. The accessory's predictable contact geometry supports automated and manual workflows alike, improving throughput while maintaining traceable inspection routines under a single measurement procedure. Dependable choice for workshop and lab environments Constructed to maintain geometry over repeated use, the accessory delivers repeatability required for serial inspections and incoming goods checks. Its purpose-built form ensures stable seating in measuring fixtures, which helps to avoid false rejects and unnecessary rework. For test benches and quality departments seeking robust thread verification without excessive complexity, this accessory offers a pragmatic balance of accuracy and operational reliability. Contact Metav Werkzeuge for tailored measurement advice and to source the Microtech Metrology thread measuring attachment in Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 for application support and procurement guidance Technical data Article number: 141377214T GTIN: 4061905458835 Manufacturer: Microtech Metrology Facts Angle: 55° Pitch: 8 Special features Thread profile: BSF (Whitworth 55° form) Intended use: Thread measurement accessory Category: Measurement accessories FAQ Is the attachment suitable for standard BSF thread inspection? Yes. The Thread measuring attachment "BSF 55°" from Microtech Metrology is designed specifically for BSF (Whitworth) thread profiles and provides the correct 55° geometry for reliable inspections. What pitch sizes does the accessory support? The accessory is specified with a pitch value of 8 and is intended for use where that pitch is applicable; check compatibility with the thread standard required in the inspection plan. Can the attachment be used in automated measuring setups? Yes. The accessory's defined profile and mounting compatibility allow integration into both manual benches and automated inspection fixtures, supporting consistent measurement routines. Which product identifiers should be used when ordering? Refer to article number 141377214T and GTIN 4061905458835 when enquiring or placing an order for the Microtech Metrology thread measuring attachment. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measuring Attachment BSF For Thread Inspection - Microtech Metrology
Take advantage of precise 55° profile control and compatibility with a 7 mm pitch for reliable thread inspection. Order the measuring attachment directly via Metav Werkzeuge or consult the team for specification matching and procurement. Measuring attachment BSF 55° — thread measurement accessory by Microtech Metrology The Measuring attachment BSF 55° is a precision accessory for thread inspection, engineered for 55° thread profiles and intended as a fitting for comparators and measuring fixtures in quality control environments. Precise 55° thread profile geometry Compatible with 7 mm thread pitch Accessory for comparators and fixtures Supplied as a single measuring attachment Ensure correct profile control for BSF threads Accurate reproduction of the 55° flank angle is essential for repeatable thread assessment; the measuring head replicates that geometry to enable consistent comparisons against go/no-go criteria. By focusing on the defining angle rather than general thread shape, the attachment reduces ambiguity in profile checks and supports faster decision-making during incoming inspections or in-process audits. The clear mechanical reference provided by the measuring geometry leads to fewer false rejections and a more efficient inspection loop, which is particularly valuable in production environments that handle legacy British Standard Fine (BSF) threads. Quick integration into existing metrology setups Designed as an accessory for comparators and measuring fixtures, the attachment interfaces with standard inspection equipment without extensive modification. Its compatibility with a 7 mm pitch makes it suitable for components that share that thread spacing; the concise form factor supports straightforward mounting and alignment, keeping setup time to a minimum. This practical compatibility translates into operational efficiency: fewer adjustments at changeover, quicker measurement cycles and more consistent throughput in routine quality checks. The result is a tangible improvement in throughput where thread verification is a recurring process. Built for dependable inspection routines and traceable inventory Manufactured by Microtech Metrology, the attachment is intended for systematic use in metrology labs and workshop inspection benches where reproducibility matters. As a dedicated accessory rather than a consumable, it supports repeatable checks across batches and production runs, helping to maintain stable statistical process control. Clear labelling with the product identifiers aids traceability in inspection protocols and stock management. When combined with disciplined measuring procedures, the accessory contributes to reduced rework rates and a steadier quality record for threaded components. Contact Metav Werkzeuge today to discuss integrating the Microtech Metrology BSF 55° measuring attachment into existing inspection workflows and to confirm suitability for the intended thread sizes Technical data Article number: 141377215T GTIN/EAN: 4061905458842 Manufacturer: Microtech Metrology Core specifications Thread angle: 55° Pitch: 7 mm Category: Accessory for measuring instruments Features and compatibility Intended for BSF 55° thread inspection Accessory for comparators and measuring fixtures Supplied individually (not a set) Accessory classification: measuring attachment FAQ Which thread form is the attachment designed for? The attachment is designed for BSF 55° thread profiles and reproduces the 55° flank geometry required for reliable inspections. What pitch is supported by this measuring accessory? This measuring attachment is specified for a 7 mm pitch and is intended for threads that match that spacing. Is the product supplied as a set or individually? The item is supplied individually; it is not delivered as a set and is intended as a single measuring attachment for integration into existing fixtures. Which applications are typical for this accessory? Typical applications include comparator-based thread inspection, workshop quality control, and routine verification of threaded components where BSF profiles are used. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measuring Attachment For 4–11 TPI Threads, Set Of 9 - Microtech Metrology
Take advantage of a compact, workshop-ready solution that combines a true 55° Whitworth profile, coverage for 4–11 TPI and a nine-piece set for quick thread verification; order directly via Metav Werkzeuge or consult the team for application support. Measuring Attachment BSF 55° — thread inspection attachment, 4–11 TPI, 9-piece set (Microtech Metrology) The Measuring Attachment BSF 55° is a compact thread-profile accessory designed for fast verification of BSF/Whitworth threads across the common 4–11 TPI range in production and service environments. 55° Whitworth thread profile for BSF inspection Covers 4–11 TPI range for common fine threads Supplied as a 9-piece precision set Microtech Metrology traceable accessory Faster, repeatable checks for thread inspection This accessory is intended to speed up routine thread checks by offering a dedicated 55° profile that corresponds to the Whitworth-based BSF form; the combination of a discrete 4–11 TPI range and a 9-piece set enables rapid selection of the correct gauge for the workpiece. By using a dedicated profile rather than improvised methods, inspection throughput increases and error sources tied to subjective comparison are reduced. The attachment is suited for inline usage as an accessory to existing measuring stands and comparators, converting a visual or tactile check into a repeatable verification step and supporting consistent production quality. Clear technical basis for decision-making The 55° angle is the defining geometric parameter of the thread form and ensures the profile matches BSF/Whitworth flanks; this alignment removes ambiguity when assessing form fit and thread condition. The designation 4–11 TPI specifies threads per inch, a common imperial metric for fine British threads, and the set of nine discrete sizes covers the typical workshop spectrum. Using the attachment simplifies the check to a go/no‑go style assessment or a profile-match inspection, which shortens measuring cycles and reduces rework through earlier detection of damaged or incorrect threads. Integrates with workshop process and documentation Delivered as a compact set, the accessory fits into routine metrology workflows as a repeatable instrument for production, maintenance and incoming inspection tasks. The form factor and set configuration reduce tool changes and help maintain a tidy inspection bench, while compatibility with established measuring fixtures allows easy retrofitting. Where traceability is required, the accessory can be documented as part of the inspection kit; its clear labelling and SKU simplify inventory management and ordering from stock suppliers. For reliable BSF thread verification, contact Metav Werkzeuge for supply and application advice — Microtech Metrology accessories and the 9-piece BSF 55° set are available from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 141377291T GTIN: 4061905458606 Name: Measuring attachment (BSF 55°) Range: 4–11 TPI Pieces per set: 9 Angle: 55° Set: yes Facts TPI range: 4–11 Pieces: 9 Angle: 55° Special features BSF / Whitworth 55° thread profile Accessory for thread inspection instruments Supplied as a matched nine-piece set FAQ What thread range does the attachment cover? The attachment covers the common BSF range from 4–11 TPI, supplied as a matched nine-piece set for discrete checks. Which thread form is represented by the 55° profile? The 55° profile corresponds to the Whitworth-based BSF thread form; the attachment reproduces the flank angle used for BSF inspection. Is the set suitable for production and workshop use? Yes, the nine-piece set is designed for workshop and production inspection tasks and integrates with standard measuring fixtures as an accessory. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measuring Attachment For BSW Threads - Microtech Metrology
Take advantage of the clear metrological definition and the precise 55° geometry combined with compatibility for a 6 mm thread pitch to ensure consistent thread inspections. Order the measuring attachment directly via Metav Werkzeuge or ask our consultants if a specific instrument interface is required. Measuring Attachment BSW 55° for Thread Measurement (Microtech Metrology) Measuring Attachment BSW 55° — a compact accessory created for reliable inspection of BSW thread profiles on workshop and laboratory measuring instruments Precision 55° measuring geometry Designed for BSW thread inspection Compatible with 6 mm thread pitch Manufacturer: Microtech Metrology Consistent results through defined thread geometry The attachment provides a 55° profile specifically matched to the BSW (British Standard Whitworth) form, ensuring repeatable reference points when assessing flank angles and crests. Fitting as an accessory to measuring instruments, this component reduces operator interpretation and speeds up standard inspections by delivering a defined contact geometry. The clear mechanical definition is particularly suited to quality control workflows where comparability and traceability are required. Integration and practical benefits for the workshop Designed as a dedicated accessory for thread measurement, the unit is optimised for rapid use on existing measuring stands and comparators, avoiding lengthy fixture changes. The declared 6 mm pitch compatibility streamlines sampling of commonly specified BSW threads and reduces setup time during batch checks. The compact construction supports straightforward handling, and the robust geometry maintains measurement integrity across routine inspection cycles. Why this accessory supports measurement strategy By supplying a defined measuring interface rather than a subjective visual check, the attachment helps convert manual thread inspection into a reproducible metrological task. The accessory complements established measuring equipment, enabling documented inspections that integrate into quality management processes. For workshops seeking to standardise thread checks without replacing instruments, the measuring head offers a cost-effective route to improved consistency. For tailored advice on instrument compatibility or to procure this Microtech Metrology measuring attachment, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 for technical guidance and order support Technical data Article number: 141377204T GTIN: 4061905458774 Manufacturer: Microtech Metrology Facts Angle: 55° Pitch: 6 mm Category: Accessory for measuring instruments Special features For BSW (British Standard Whitworth) thread profiles Accessory for thread inspection workflows Compact, robust measuring geometry FAQ What thread standard is this attachment intended for? This attachment is intended for BSW (British Standard Whitworth) thread profiles and provides the defined 55° flank geometry required for consistent inspections. Which pitch sizes are supported with this accessory? The attachment is specified for a 6 mm thread pitch as indicated in the product data and is suitable for common BSW measurements at that pitch. Can this accessory be used with any measuring instrument? The accessory is designed as an add-on for measuring instruments; compatibility depends on the instrument's mounting interface and the required fixture. Metav Werkzeuge can advise on instrument compatibility. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
575mm Digitaler Messschieber, 0,01mm, IP 67, Wireless, Kalibriert nach ISO 17025 - Microtech Metrology
Produktfazit Der Messschieber von Microtech Metrology verbindet hohe Messgenauigkeit mit praxisgerechter Robustheit und einfacher Datenerfassung. Nutzen Sie die Kombination aus ±0,05 mm Genauigkeit, ISO 17025 Kalibrierung und Wireless Datenausgang für transparente Prüfabläufe und lückenlose Dokumentation. Bestellen Sie das Gerät direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Messschieber digitaler Messschieber von Microtech Metrology Messschieber digitaler Schieber für präzise Längenmessungen mit Wireless Anbindung, Schutzklasse IP67 und Kalibrierzeugnis für Labor- und Werkstatteinsatz. Digitalanzeige Big Screen Swiss Electronics Messbereich bis 575 mm, handliches Langformat Datenausgang Wireless für einfache Dokumentation IP67 Schutz gegen Staub und Feuchtigkeit Kalibriert nach ISO 17025 mit Kalibrierzeugnis Präzision und Nachweisbare Kalibrierung für Qualitätsprüfungen Die Schieblehre liefert eine Ablesung von 0,01 mm und eine ausgewiesene Genauigkeit von ±0,05 mm, was verlässliche Ergebnisse für Standardprüfungen ermöglicht. Die Auslieferung erfolgt kalibriert; das beiliegende Kalibrierzeugnis nach ISO 17025 schafft Nachvollziehbarkeit für Prüfberichte und erleichtert die Integration in Qualitätsmanagement. Anwender profitieren so von reproduzierbaren Messwerten und dokumentierter Messsicherheit. Robustes Konzept für rauen Werkstattalltag und Baustelle Das Gehäuse und die Elektronik sind für den Einsatz unter anspruchsvollen Bedingungen ausgelegt; die Schutzart IP67 erlaubt Messungen in staubiger Umgebung und bei Spritzwasser. Mit einem Messbereich von maximal 575 mm fällt dieses Modell in die Kategorie „Mit Gross“, wodurch es ausreichend Reichweite für größere Baugruppen bietet, ohne an Handhabungskomfort zu verlieren. Die Konstruktion reduziert Verwindung und sorgt für stabile Messergebnisse über die ganze Länge. Effiziente Datenerfassung und sofortige Lesbarkeit Das Displaykonzept Big Screen Swiss Electronics sorgt für klare Ablesbarkeit, während der Wireless Datenausgang die direkte Übertragung an Auswertesoftware oder Messdatenerfassungssysteme erlaubt. Diese Kombination minimiert Übertragungsfehler, beschleunigt Prüfabläufe und reduziert Dokumentationsaufwand. Für Prüfplätze und Fertigungslinien bedeutet das weniger manuelle Eingaben und schnellere Rückmeldung in der Prozesskontrolle. Zielgruppe, Einsatzbereiche und Praxisnutzen Die Schieblehre richtet sich an Maschinenbau, Vorrichtungsbau, Formenbau und Werkstätten, die häufig Komponenten bis in den mittleren Längenbereich prüfen. Durch die Kalibrierung und den dokumentierten Nachweis eignet sich das Messgerät ebenso für Prüfmittelverwaltung und Stichprobenprüfungen in der Qualitätssicherung. Techniker und Messtechniker erhalten ein Werkzeug, das Reichweite, Robustheit und Dokumentationsfähigkeit in einem Gerät vereint. Empfehlung: Für verlässliche Messungen bis 575 mm empfiehlt sich der Microtech Metrology Messschieber mit Wireless Datenausgang und ISO 17025 Kalibrierung — bei Fragen zur Integration oder zur Bestellung wenden Sie sich an Metav Werkzeuge unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produkteigenschaften Artikelnummer: 141305154 Marke: Microtech Metrology Bezeichnung: Messschieber Daten Auflösung: 0,01 mm Genauigkeit: ±0,05 mm Messbereich min: 75 mm Messbereich max: 575 mm GTIN: 4061905452635 Besonderheiten Datenausgang: Wireless Digitalanzeige: Big Screen Swiss Electronics IP Schutz: IP 67 ISO 17025: Kalibriert, Kalibrierzeugnis Digital: true Schnabellänge: 300xØ3 FAQ Wie genau ist der Messschieber in der Praxis? Der Messschieber von Microtech Metrology erreicht eine Auflösung von 0,01 mm und eine angegebene Genauigkeit von ±0,05 mm, sodass er sich für Routineprüfungen und Werkstattmessungen eignet. Wird das Messgerät kalibriert geliefert? Ja, der Microtech Metrology Messschieber wird nach ISO 17025 kalibriert geliefert und enthält ein Kalibrierzeugnis, das die Dokumentation für Prüfmittelmanagement erleichtert. Welche Datenschnittstellen stehen zur Verfügung? Das Modell bietet einen Wireless Datenausgang, der die kabellose Übertragung von Messwerten an Auswertesoftware und Prüfsysteme ermöglicht. Ist das Gerät für den Einsatz im Freien geeignet? Durch die Schutzart IP67 ist der Schieber gegen Staub geschützt und gegen zeitweiliges Untertauchen dicht, somit kann er auch in anspruchsvolleren Umgebungen eingesetzt werden. Für welche Bauteillängen ist dieser Schieber vorgesehen? Mit einem maximalen Messbereich von 575 mm gehört das Gerät zur Kategorie Mit Gross und ist ideal für größere Bauteile, Spannmittel und Gehäuse im Werkstatt- und Produktionsumfeld. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
600mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, Wireless, Swiss Electric Display, ISO 17025 Kalibrierung - Microtech Metrology
Die Kombination aus Genauigkeit 0,03 mm, Wireless-Datenübertragung und ISO 17025 Kalibrierschein sorgt für zuverlässige Messergebnisse und dokumentierbare Qualität. Nutzen Sie diese Eigenschaften für standardisierte Prüfprozesse und bestellen Sie das passende Messwerkzeug direkt über Metav Werkzeuge oder fragen Sie bei Bedarf die technische Beratung an. Messschieber — Digitaler Messschieber von Microtech Metrology Der Messschieber ist ein digitaler Messschieber für präzise Außen-, Innen- und Stufenmessungen bis 600 mm mit robuster Bauweise und dokumentierbarer Kalibrierung. Digitalanzeige Swiss electric 14 mm Ablesung 0,01 mm, Genauigkeit 0,03 mm Messbereich 600 mm – Mit Gross Einordnung Wireless-Datenausgang für direkte Dokumentation ISO 17025 Kalibrierzeugnis inklusive Präzise Messergebnisse und nachvollziehbare Qualität Die digitale Anzeige mit einer Ablesung von 0,01 mm und die deklarierte Genauigkeit 0,03 mm ermöglichen reproduzierbare Messwerte für den Maschinenbau und die Produktionskontrolle. Durch das ABS-Messsystem werden Referenzpunkte zuverlässig verwaltet, was Messabläufe vereinfacht und Fehlerquellen reduziert. Für Anwender, die standardisierte Prüfprozesse umsetzen, ist die mitgelieferte ISO 17025 Kalibrierung ein klarer Vorteil, da sie die Rückverfolgbarkeit und die Akzeptanz der Messergebnisse gegenüber Prüfinstanzen und Kunden erhöht. Robuste Bauweise und Schutz für den Einsatz in Werkstattumgebungen Die Konstruktion mit einem Querschnitt von 23 x 6 mm und einer Schnabellänge von 100 mm sorgt für gute Führbarkeit bei längeren Messungen, ohne an Stabilität einzubüßen. Die Schutzklasse IP 67 erlaubt den Einsatz auch unter anspruchsvolleren Bedingungen mit Spritzwasser und kurzzeitigem Eintauchen, wodurch sich die Messtechnik in Fertigungshallen oder auf Montageeinsätzen bewährt. Das langlebige Materialbild und die praxisgerechte Geometrie reduzieren Verschleiß und sorgen für konstante Messbedingungen. Effiziente Datenerfassung und nahtlose Dokumentation Der integrierte Wireless-Datenausgang ermöglicht die sofortige Übertragung von Messwerten in Dokumentationssysteme oder auf mobile Endgeräte, was Nacharbeit reduziert und Prozesszeiten verkürzt. Die gut ablesbare Swiss electric Anzeige mit 14 mm Ziffernhöhe unterstützt die schnelle Kontrolle vor Ort. Für Betriebe, die Messdaten digital speichern und auswerten, bietet diese Funktion einen klaren Effizienzgewinn und erleichtert die Einbindung in Qualitätsmanagement-Prozesse. Einsatzbereich und Einordnung nach Messlänge Mit einem Messbereich von 600 mm gehört dieses Gerät zur Kategorie Mit Gross, die für großformatige Komponenten, Vorrichtungen und Serienbauteile ausgelegt ist. Diese Klasse vereint Reichweite und Profilsteifigkeit, sodass Messungen über die gesamte Länge reproduzierbar bleiben. Das Messgerät eignet sich daher für Werkstätten, Verzahnungsprüfungen und die spanende Fertigung, wo längere Schenkel erforderlich sind, ohne auf Ergonomie und Handhabung verzichten zu müssen. Empfehlung: Für reproduzierbare Prüfprozesse empfiehlt sich der Einsatz des Microtech Metrology Digitalmessschiebers mit ISO 17025 Kalibrierung; bei Fragen zur Anwendung oder zur Datenanbindung steht Metav Werkzeuge gern zur Verfügung — eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930. Produktmerkmale Artikelnummer: 141073691 Marke: Microtech Metrology Bezeichnung: Messschieber GTIN: 4061905454639 Messsystem: ABS Fakten Genauigkeit: 0,03 mm Ablesung: 0,01 mm Messbereich: 0-600 mm Schnabellänge: 100 mm Querschnitt: 23x6 Besonderheiten IP 67 Schutzklasse: schutz gegen Eindringen von Staub und zeitweiliges Eintauchen Wireless: kabellose Datenübertragung Digitalanzeige: Swiss electric Ziffernhöhe 14 mm ISO 17025: Kalibrierzeugnis wird mitgeliefert Messbereich-Kategorie: Mit Gross FAQ Welche Genauigkeit liefert dieses Messgerät? Der Microtech Metrology Messschieber (Artikelnummer 141073691) bietet eine deklarierte Genauigkeit von 0,03 mm bei einer Ablesung von 0,01 mm, geeignet für Qualitätskontrollen im Maschinenbau. Ist ein Kalibrierzertifikat enthalten? Ja, der Messschieber von Microtech Metrology wird mit einem ISO 17025 Kalibrierzeugnis ausgeliefert, wodurch die Messergebnisse dokumentierbar und rückverfolgbar sind. Wie werden die Messwerte dokumentiert? Die Übertragung erfolgt per Wireless-Schnittstelle, sodass Messwerte direkt in Dokumentationssysteme exportiert oder mobile Geräte angesteuert werden können. Für welche Messlängen ist das Gerät geeignet? Mit einem Messbereich bis 600 mm ist der Messschieber der Kategorie Mit Gross zuzuordnen und eignet sich für längere Bauteile und Vorrichtungen in Fertigung und Montage. Ist das Gerät gegen Staub und Spritzwasser geschützt? Ja, die Schutzklasse IP 67 ermöglicht den Einsatz unter raueren Bedingungen mit Schutz gegen Staub und zeitweiliges Eintauchen. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
600mm Digitaler Messschieber, Swiss Electric Display 0,01mm, IP 67, ISO 17025 Kalibriert - Microtech Metrology
Kombination aus ISO 17025 Kalibrierung, IP 67 Schutz und 0–600 mm Messbereich liefert präzise, reproduzierbare Messergebnisse für den Fertigungsalltag. Die 0,01 mm Ablesbarkeit und das robuste Gehäuse sorgen für dauerhafte Verlässlichkeit bei wiederkehrenden Prüfungen. Bestellen Sie das Gerät direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Messschieber – Digitaler Messschieber von Microtech Metrology Der Messschieber von Microtech Metrology ist ein kalibriertes, digitales Messinstrument mit hohem Schutzgrad und großer Reichweite für präzise Werkstatt‑ und Prüfaufgaben. Digitaler Messschieber mit IP67 Schutz Kalibriert nach ISO 17025 inklusive Kalibrierzeugnis Messbereich 0–600 mm für großformatige Bauteile Swiss electric Display mit 11 mm Ziffernhöhe Langlebigkeit und Schutz für anspruchsvolle Messaufgaben Die Konstruktion bietet IP 67 Schutz, was bedeutet, dass der Schieber staubdicht ist und gegen zeitweiliges Eintauchen geschützt ist. Diese Eigenschaft reduziert Ausfallzeiten durch Feuchtigkeit oder Schmutz in Werkstattumgebungen und verlängert die Standzeit des Geräts. Durch den robusten Querschnitt von 23x6 mm bleibt die Gleitschiene verwindungsarm, was die Reproduzierbarkeit von Messungen auch unter rauen Bedingungen erhöht. Präzision und Kalibrierung für verlässliche Ergebnisse Dank ISO 17025 Kalibrierung wird das Messinstrument mit einem offiziellen Kalibrierzeugnis ausgeliefert, das die Rückführbarkeit der Messergebnisse dokumentiert. Die Ablesbarkeit von 0,01 mm und die angegebene Genauigkeit von 0,03 mm machen das Gerät geeignet für Qualitätskontrolle und Fertigungsprüfung, wo nachvollziehbare Toleranzen erforderlich sind. Anwender profitieren von geringem Prüfaufwand und klaren Messwerten auf dem gut ablesbaren Display. Reichweite und Handhabung für große Werkstücke Mit einem Messbereich bis 600 mm fällt das Produkt in die Kategorie «Mit Gross», ideal für größere Spannmittel, Aufnahmen und Gehäuse. Die lange Schnabellänge von 100 mm erleichtert Greif‑ und Innenmessungen an tiefen Konturen. Das ABS Messsystem sorgt für stabile Nulleinstellungen und dauerhaft reproduzierbare Referenzpunkte, wodurch sich die Effizienz bei wiederholten Messläufen erhöht. Zielgruppenorientierte Einsatzfelder und Praxisnutzen Insbesondere für Maschinenbau, Vorrichtungsbau und Prüflabore ist das Instrument konzipiert, weil es große Bauteile präzise und dokumentiert messbar macht. Kleinere Fertigungsbetriebe profitieren gleichermaßen von der einfachen Ablesbarkeit und der robusten Ausführung, während Kalibrierlaboratorien die Nachweisführung über das mitgelieferte Zertifikat schätzen. Die Kombination aus Reichweite, Schutzklasse und Kalibrierung bietet einen klaren Nutzen für prozesssichere Fertigung. Mit dem kalibrierten Microtech Messschieber die Messsicherheit in Ihrer Fertigung steigern — direkt bei Metav Werkzeuge anfragen: info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 141073611 Marke: Microtech Metrology Bezeichnung: Messschieber GTIN: 4061905454875 Daten Messbereich: 0–600 mm Messbereich Max: 600 mm Ablesung: 0,01 mm Genauigkeit: 0,03 mm Schnabellänge: 100 mm Querschnitt: 23x6 mm Digital Anzeige: Swiss electric Digit Höhe 11mm Besonderheiten IP 67 — Staubdicht, Schutz gegen zeitweiliges Eintauchen ISO 17025 — Akkreditierte Kalibrierung, Kalibrierzeugnis liegt bei Messsystem: ABS — Achsbezugssystem für stabile Nullreferenz Digital — mit elektronischer Anzeige für einfache Ablesung FAQ Wie genau ist der Messschieber in der Praxis? Der Microtech Messschieber erreicht eine Ablesbarkeit von 0,01 mm und eine angegebene Genauigkeit von 0,03 mm, wodurch er für die meisten Qualitätskontrollen im Maschinenbau und in Prüflaboren geeignet ist. Wird der Messschieber kalibriert geliefert? Ja, der Messschieber von Microtech Metrology wird vollständig kalibriert ausgeliefert; das ISO 17025 Kalibrierzeugnis liegt dem Gerät bei und dokumentiert die Rückführbarkeit der Messergebnisse. Für welche Anwendungen eignet sich der Messschieber mit 600 mm Reichweite? Der Messbereich bis 600 mm macht das Gerät ideal für größere Komponenten wie Aufnahmen, Gehäuse oder Vorrichtungen im Vorrichtungs‑ und Formenbau sowie in der Serienfertigung. Wie widerstandsfähig ist das Gerät gegenüber Feuchtigkeit und Schmutz? Mit IP 67 Schutz ist das Gerät staubdicht und gegen zeitweiliges Eintauchen geschützt, was es für den robusten Einsatz in Werkstätten prädestiniert. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
60° Thread Measurement Attachment - Microtech Metrology
Take advantage of the precise 60° thread profile and dedicated 4.5 mm pitch compatibility to streamline thread inspection and reduce rework; order the accessory directly via Metav Werkzeuge or consult our specialists for application advice. Measuring attachment – 60° thread gauge by Microtech Metrology The Measuring attachment is a purpose-built accessory for metrology applications, providing a 60° contact profile for reliable thread form checks and pitch verification. 60° profile for standard metric thread checks Designed for 4.5 mm thread pitch verification Precision accessory by Microtech Metrology Make thread-form checks consistent and traceable The 60° contact geometry is a standard reference for metric thread profiles, enabling consistent assessment of flank form and alignment. Fitted as an inspection accessory, the component converts comparative readings into a repeatable check routine and supports quality control workflows where form conformity is essential. The clear definition of the contact angle reduces interpretational variance compared with ad‑hoc methods, so occasional rejects become measurable process improvements rather than anecdotal complaints. Reduce inspection time with a purpose-designed pitch reference A dedicated pitch specification of 4.5 mm means the accessory is tuned for that thread spacing, simplifying quick verification tasks and accelerating batch sign‑offs. By providing an immediate physical reference for the pitch, the device shortens the time spent on manual calculations and visual estimation. This logical optimisation supports lean inspection protocols in workshops and inspection labs, where throughput and reliable pass/fail criteria translate directly into operational efficiency. Precision manufacturing that supports consistent results Manufactured under the Microtech Metrology label, this accessory is a precision‑graded part intended for repeat use within inspection chains. The compact design and defined profile permit uncomplicated integration into existing measuring arrangements while preserving alignment and contact fidelity. The result is a dependable accessory that helps maintain consistent measurement conditions and protects traceability chains during routine thread inspections. For tailored application guidance on the Microtech Metrology measuring attachment and to ensure the correct accessory for specific inspection equipment, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: 141377145T GTIN: 4061905458460 Manufacturer: Microtech Metrology Facts Angle: 60° Thread pitch: 4.5 mm Set composition: single item Special features Application: thread profile measurement Category: accessory (Zubehör) Story trigger: accessory for measuring instruments FAQ How is the attachment used for thread inspection? The attachment positions a defined 60° contact profile against the thread flank so comparative checks and profile assessments can be carried out reliably with standard metrology equipment. Which thread pitch is supported by this accessory? This measuring attachment is specified for 4.5 mm thread pitch verification and is optimised for quick pitch checks and flank alignment assessments. Is the accessory supplied as a set or single item? The product is supplied as a single accessory unit intended for integration into existing inspection procedures. Can the attachment be used on any measuring instrument? Compatibility depends on the instrument's mounting and interface. The accessory is designed as a metrology component; suitability should be checked against the instrument's fixture or adapter configuration. Who manufactures the attachment? The part is manufactured by Microtech Metrology and is intended for precision inspection workflows. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
60° Thread Measurement Attachment - Microtech Metrology
Benefit from precise 60° thread inspection combined with a defined 1 mm pitch reference for consistent quality control; robust construction ensures repeatable readings in workshop and inspection environments. Order the attachment directly via Metav Werkzeuge or consult the team for application support. Measurement Attachment – 60° Thread Measurement Attachment, 1 mm Pitch (Microtech Metrology) A Measurement Attachment designed for accurate 60° thread verification and pitch assessment in metrology and workshop quality-control workflows Precise 60° geometry for standard thread checks Defined 1 mm pitch reference for repeatable inspection Compact design for easy integration into gauges Manufactured for consistent measurement results Accurate thread verification that supports reliable quality decisions The compact measurement head provides a defined 60° geometry that matches common thread profiles, enabling straightforward verification of flank angles during incoming inspection and in-process checks. By referencing the 1 mm pitch, the device supports rapid identification of pitch-related deviations without complex setup. This focused design reduces measurement uncertainty and speeds up comparison against technical drawings or gauge masters, delivering a clear, performance-driven improvement to routine metrology tasks. Seamless integration into existing inspection setups Engineered as an accessory for metrology systems and hand gauges, the attachment mounts with minimal adaptation and aligns with standard inspection workflows. The precise geometry and pitch reference allow easy pairing with calipers, height gauges and dedicated thread inspection fixtures, maintaining repeatability across multiple operators and shifts. Clear mechanical reference features mean that no extensive retraining is required, so throughput and process reliability are enhanced without lengthy commissioning. Consistent workshop use for production and QA environments Built for regular use in production and laboratory settings, the accessory emphasises reproducible measurement rather than complex electronics. Its straightforward function reduces potential user error and supports consistent results during serial checks or sampling routines. Where traceability is required, the attachment’s compatibility with recognised metrology practices helps embed reliable inspection steps into quality-management routines and supports informed decision-making on acceptance or rework. For precise 60° thread inspection rely on Microtech Metrology’s attachment — contact Metav Werkzeuge in Emmerich for delivery options and technical guidance. Technical Data Article number: 141377110T GTIN: 4061905458330 Manufacturer: Microtech Metrology Facts Thread angle: 60° Thread pitch: 1 mm Category: Accessory (measurement) Special features Purpose: Thread measurement accessory Application: Workshop and quality control inspection Compatibility: Designed for integration with standard gauges FAQ What is the primary purpose of this measurement attachment? The Measurement Attachment from Microtech Metrology (SKU 141377110T) is intended for 60° thread inspection and verification of a 1 mm pitch during quality checks. Can the attachment be used with existing calipers or gauges? Yes, the accessory is designed for simple integration with standard inspection gauges and measuring setups commonly used in workshops and inspection benches. Is this accessory suitable for production sampling or laboratory use? The attachment is suitable for both production sampling and laboratory checks where a defined 60° geometry and 1 mm pitch reference are required for repeatable results. Does the product include calibration or certification? Product documentation does not list calibration details; calibration status should be confirmed with Metav Werkzeuge when ordering. Which manufacturer makes this attachment? This accessory is produced by Microtech Metrology and supplied under SKU 141377110T. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
60° Thread Measurement Attachment for Caliper, - Microtech Metrology
Take advantage of precise 60° geometry and a dedicated 2 mm pitch reference to streamline thread inspections; order directly via Metav Werkzeuge or consult our specialists for application support. Measuring Attachment – 60° thread head, pitch 2 mm (Microtech Metrology) The Measuring Attachment is a compact accessory designed for precise 60° metric thread checks on inspection gauges and measuring setups, enabling reliable verification of standard thread geometries. 60° geometry for metric thread measurement Suited for 2 mm thread pitch checks Accessory compatible with inspection devices Consistent geometric reference for faster inspections The 60° angle is the established standard for many metric thread profiles, so the attachment provides a stable, repeatable contact geometry that reduces interpretation variability during checks. With a dedicated pitch 2 mm reference built into the head, the accessory simplifies comparison tasks and shortens cycle times in incoming‑goods inspection or workshop quality checks. This focused design supports faster decisions on conformity and helps maintain a steady production flow by removing the need for improvised fixtures. Easy integration into established measuring setups Designed as an accessory for measurement devices and gauges, the head mounts with minimal adaptation and does not require complex recalibration of whole systems. The compact form factor keeps handling straightforward, improving ergonomics during repetitive checks and decreasing setup time between batches. As a result, inspection procedures become more efficient while retaining the same procedural discipline, which is particularly useful in machine shops and small-series production where throughput and traceability matter equally. Improves repeatability and supports quality workflows Using a defined contact geometry and pitch reference increases repeatability across operators and shifts, which reduces scrap and rework costs in the medium term. The attachment acts as a standardised tool within existing inspection routines, supporting documented procedures and audit trails. When combined with Metav’s distribution and quality assurance approach, this accessory becomes part of a reliable supply chain for metrology consumables and accessories that aim to make precision accessible on the shop floor. Discuss integration and delivery with Metav Werkzeuge – contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to confirm suitability, availability and next steps Technical data Article number: 141377120T GTIN: 4061905458743 Manufacturer: Microtech Metrology Numbers / Core technical data Angle: 60° Pitch reference: 2 mm Designs / Special features Accessory for measurement devices and gauges Intended for metric thread measurement Category: Zubehör (Accessories) FAQ What is the measuring attachment used for? The measuring attachment (Microtech Metrology, accessory for inspection devices, SKU 141377120T) is used for checking metric threads with a 60° profile and reference to a 2 mm pitch. Can the attachment be used for different thread pitches? The attachment provides a fixed pitch 2 mm reference; for other pitches, alternative heads or procedures should be selected to match the required thread specification. Is special calibration required before first use? Standard practice is to verify the attachment within the existing inspection procedure; the accessory itself does not include a separate calibration certificate unless supplied as part of a specific calibrated set. Which applications benefit most from this accessory? Small-series production, incoming‑goods inspection and workshop checks where repeatable geometric reference for metric threads accelerates go/no‑go decisions benefit most from this accessory. Does the accessory fit all measurement systems? The accessory is intended for integration with compatible gauges and measuring setups; confirm mechanical interface and fixture compatibility with the measuring system in use and reference the SKU 141377120T for specification checks. Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
60° Thread Measurement Attachment For Calipers - Microtech Metrology
The combination of a defined 60° profile and compatibility with common metric thread pitches (notably 2.5 mm) delivers reliable thread-profile inspection with minimal setup time; benefit from reduced rework and consistent quality control. Order the measuring head directly via Metav Werkzeuge or consult the Metav specialists for integration advice. Measuring Attachment 60° for Thread Measurement — Microtech Metrology A Measuring Attachment 60° engineered as an accessory for precision measuring devices, enabling clear assessment of standard thread profiles in inspection and quality‑control workflows. 60° profile for standard thread gauges Compatible with precision measuring fixtures Suitable for 2.5 mm pitch thread checks Reliable inspection where thread form matters The accessory provides a defined 60° contact geometry that standardises how thread flanks are engaged during inspection. By fixing the profile angle, the component reduces operator variability and supports consistent repeatability across batches. In practice, the described geometry is used to verify flank form and effective thread shape on samples, making it a pragmatic choice for workshop and laboratory setups that require clear pass/fail criteria without lengthy adjustments. Fast integration into measuring routines Designed as a measuring accessory rather than a complete instrument, the unit fits into existing metrology setups and measuring fixtures, shortening commissioning times. The simple geometry—optimised for 2.5 mm pitch threads—permits rapid checks during incoming inspection or final quality control, improving throughput while maintaining precision standards. Fewer adjustments lead to reduced cycle time per part and lower risk of measurement-induced rework. Clear technical basis for decision‑making The attachment’s defined angle and pitch specification make its purpose transparent for procurement and QA documentation: a tool for thread profile verification at 60° suitable for metric threads with the stated pitch. This factual clarity supports comparison with alternative solutions and enables specification-driven purchasing decisions. The accessory’s role as a measuring head is explicit and therefore straightforward to justify in quality plans and inspection procedures. Built for practical workshop use and traceable supply As an accessory from Microtech Metrology, the head is intended for professional inspection environments where compatibility and supply reliability matter. Sourcing through a specialist distributor ensures spare availability and advice on fixture adaptation. The association with a trusted supplier like Metav reinforces dependable logistics and access to further metrology products, which helps maintain continuous measurement capability on the shop floor. For integration guidance or to arrange delivery of the Microtech Metrology measuring attachment, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 — Metav’s specialists can advise on fixture compatibility and ordering. Technical Data Article number: 141377125T GTIN: 4061905458750 Brand: Microtech Metrology Data Angle: 60° Thread pitch: 2.5 mm Category: Accessory / Measuring equipment Special features Accessory for thread-profile inspection Designed for integration with precision fixtures Intended for standard metric thread checks FAQ What is the primary purpose of this measuring accessory? The measuring attachment is intended for thread‑profile inspection at a defined 60° flank angle and is used to assess thread shape and flank form for standard metric threads; the product is sold as the Microtech Metrology measuring attachment, SKU 141377125T. Which thread pitches can be inspected with this head? The accessory is specified for 2.5 mm pitch threads and is compatible with other metric thread inspections where a 60° profile is required; Microtech Metrology’s design targets common metric standards. Can the accessory be fitted to existing measuring fixtures? Yes, the attachment is designed as an accessory for precision measuring devices and fixtures; compatibility should be checked against the fixture interface and mounting provisions before installation. Does the head support repeatable quality checks in production environments? The defined contact geometry and clear specification for pitch make the accessory suitable for repeatable in‑process and incoming‑inspection checks, contributing to stable quality routines. Is the measuring attachment suitable for laboratory and workshop use? The accessory is appropriate for both workshop inspection and laboratory sample checks where a standardised 60° thread‑profile assessment is required; for integration advice refer to Metav Werkzeuge. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
60° Thread Measurement Attachment For Calipers - Microtech Metrology
Take advantage of the precise 60° geometry and defined 3.5 mm pitch specification to streamline thread inspections and reduce rejects; the result is faster quality decisions and improved repeatability. Order the measuring attachment directly via Metav Werkzeuge or ask our consultants if needed. Measuring Attachment — 60° thread measurement accessory by Microtech Metrology Measuring Attachment designed for precise verification of standard 60° thread profiles in metrology and inspection tasks 60° geometry for standard thread profiles Suitable for 3.5 mm pitch control Precision accessory by Microtech Metrology Faster, evidence-based thread verification The 60° contact geometry permits reliable evaluation of standard thread forms, providing a consistent reference for profile checks. By using this specialised attachment, inspection routines gain a clear, comparable datum for each measurement, which supports traceable pass/fail decisions and reduces corrective work downstream. The defined 3.5 mm pitch specification makes the tool immediately applicable to threads manufactured to that pitch, shortening setup time and improving throughput in batch inspections. Integrates into quality workflows with clear benefits As a purpose-made accessory from Microtech Metrology, the head enhances existing metrology processes by supplying a repeatable contact interface tailored to thread assessment. The accessory’s role is to convert a thread profile into a measurable contact condition, enabling technicians to capture the relevant geometric information quickly. This focused design reduces ambiguity in inspection results, thereby supporting faster production releases and more efficient use of shop-floor inspection time. Practical use and inspection strategy In practice, the measuring head is used where a defined contact angle is required to assess flank form and engagement for a particular thread pitch. The attachment is particularly useful in quality control stations and incoming‑inspection tasks where standardised comparisons are necessary. Documented measurement routines that reference the 60° contact help maintain consistency across operators and shifts, contributing to a reproducible sampling strategy and clearer statistical process control. Contact Metav Werkzeuge today to discuss integration requirements for the Microtech Metrology 60° measuring attachment (SKU 141377135T) and to confirm fitment with existing inspection equipment Technical Data Article number: 141377135T GTIN: 4061905458446 Manufacturer: Microtech Metrology Data Angle: 60° Thread pitch: 3.5 mm Special features Application: thread measurement accessory Category: accessory for metrology instruments Storytrigger: zubehör FAQ What thread profiles is this attachment designed for? The attachment is specified for standard 60° thread profiles and is suitable for measurement routines referencing that contact geometry. Which pitch does the accessory support? This Microtech Metrology accessory is specified for a 3.5 mm pitch and is intended to be used where that pitch is the inspection target; SKU 141377135T identifies this configuration. Can the attachment be used with any measuring instrument? The head is an accessory intended for integration into established metrology setups; compatibility depends on the instrument’s mounting and measurement concept and should be verified against instrument documentation. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Precision where standard calipers reach their limits
Specialised calipers (also available as specialist calipers and precision calipers) are engineered for measurements that conventional calipers cannot perform reliably. With custom‑shaped jaws, extended measuring ranges and advanced materials, these tools deliver reproducible results down to the micrometre range, making them indispensable for difficult‑to‑access features such as fine grooves, deep bores and complex contours.
How these calipers tackle demanding measurement tasks
Specialised calipers work by adapting jaw geometry and sensing technology to the application: pointed, blade‑shaped, round or offset jaws capture inside and outside dimensions in confined geometries, while digital, analogue and inductive sensing cover different shop and lab requirements. Digital variants offer quick readouts and data transfer via Bluetooth/USB; analogue models remain reliable in humid or rough workshop environments; inductive versions provide extreme accuracy of ±0.001 mm (1 μm), suited to inspection rooms and laboratories. Wear‑resistant materials such as carbide or ceramic tips withstand coolants, abrasion and corrosion for sustained accuracy.
Measurable benefits for production and inspection
- Faster, repeatable measurements in constrained geometries, reducing inspection time.
- Reproducible results to the micrometre range, raising process reliability.
- Longer service life thanks to carbide or ceramic tips, lowering tool replacement frequency.
- Seamless data integration: digital specialised calipers can feed results directly into CAQ systems via Bluetooth/USB, supporting inline quality control.
- Robust performance across environments—from workshop floors to clean labs—thanks to analogue and inductive options.
Metav as a dependable partner for precision measurement
Metav combines decades of expertise with a comprehensive selection for industry, craft and trade. From Emmerich, Metav operates as a quality filter for the European market, supplying high‑precision tools across more than 250,000 product lines. Trusted by over 48,000 customers, Metav makes high accuracy accessible to every workshop while ensuring reliable fulfilment and consistent product quality.
FAQ
What accuracy can I expect from specialised calipers?
Inductive specialised calipers achieve extreme accuracy of ±0.001 mm (1 μm); digital models enable quick readout and transfer, while analogue versions provide reliable shop‑floor stability.
Which jaw shapes are available and what are they best for?
Specialised calipers come with pointed, blade‑shaped, round and offset jaws designed to measure features such as wall thickness of glass ampoules, gear tooth profiles and O‑ring grooves that standard calipers cannot access.
Can specialised calipers be used for inline quality control?
Yes. Digital specialised calipers with Bluetooth/USB support direct data transfer to CAQ systems, enabling inline testing and automated documentation in series production.
Are there variants suited to harsh workshop environments?
Analogue specialised calipers are less sensitive to moisture and rough handling, and units fitted with carbide or ceramic tips resist coolants, abrasion and corrosion for durable, accurate performance.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com