Twist Drill — left-cutting, 6 mm, 135° tip, HSS‑G, DIN 338 (Profi Line) by MetavCUT The Twist Drill is a left‑cutting HSS‑G metal drill designed for use in a Drilling Machine to remove broken screws and to bore hardened steels and non‑ferrous metals. Left‑cutting geometry for screw extraction 135° tip angle optimised for hard materials HSS‑G material for high wear resistance Conforms to DIN 338 for short cylindrical shank drills Profi Line by MetavCUT for workshop reliability Faster metal drilling with less force thanks to optimised geometry The left‑cutting Twist Drill from the Profi Line combines a 135° tip angle and HSS‑G alloy to reduce drilling time and operator effort. Because the cutting geometry is configured for left rotation, the bit can assist in unscrewing broken fasteners while drilling, making repair work more efficient. The specialised grind cuts up to 40% faster and requires about 50% less thrust than conventional HSS drills, which translates into less operator fatigue and shorter job times for workshop professionals. Built for workshop use and repair tasks — reliable in demanding applications Designed primarily for metalworking, this left‑cutting Twist Drill is suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non‑ferrous metals and hard plastics. Use in a compatible Drilling Machine with reverse (left) rotation is required to exploit the cutting direction. If uncertain whether this drill fits a specific machine or application, METAV Werkzeuge offers competent support and technical advice: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Standardised dimensions and production quality for consistent results Manufactured to DIN 338 standards, the Profi Line short Twist Drill delivers consistent geometry and a cylindrical shank suited to chucks and collets used in stationary and portable drilling equipment. The DIN classification describes short spiral drills with cylindrical shanks from high‑speed steel, ensuring interchangeable dimensions and predictable performance. Choosing a tool made to this norm simplifies tool selection and reduces the risk of incompatibility on production and service equipment. Practical handling, sharpening and tool life considerations A correctly ground tip reduces the cross‑cut edge at the drill point, lowering friction and required feed force while improving centring in the workpiece. The left‑cutting grind can be resharpened when blunt; HSS‑G substrate allows straightforward regrinding without losing core hardness, extending tool life and lowering waste. Proper cooling and moderate spindle speeds for the material drilled further enhance longevity and hole quality, delivering clean, repeatable results for skilled users. Strong recommendation: For dependable left‑cutting performance in metal repair and workshop applications choose the MetavCUT Profi Line Twist Drill — for personalised technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Designation: Twist Drill Brand: MetavCUT SKU: 60060-FDA Diameter: 6 mm Tip angle: 135° Execution: left‑cutting For drilling machine: Drilling Machine Material: HSS‑G Norm: DIN 338 Model series: Profi Line Application: Drills for Metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which applications suit it best? The MetavCUT Twist Drill is primarily used for drilling and extracting in high‑strength materials; it is especially effective when working with alloyed and unalloyed steels, cast materials and hard plastics where a left‑cutting action can aid removal of broken fasteners. Which three types of drill are commonly distinguished? Common drill categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill family and is optimised for metalworking tasks. Why are Twist Drills sharpened to a point? Pointed sharpening reduces the cross‑cut edge at the tip of the Twist Drill, which significantly lowers friction and the necessary feed force; this also improves centring of the tip in the workpiece for cleaner, more accurate holes. Can a metal Twist Drill be used for wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are inferior compared with a dedicated wood bit; metal drills are easier to resharpen and have less self‑pulling action. For which drilling depths is the Twist Drill most commonly used? Twist Drills are the standard choice for through‑hole drilling; for diameters up to 20 mm and depths up to 100 mm a Twist Drill is the most frequently used tool. Is HSS or HSSE better for my application? There is no universal superiority; HSSE is not automatically better than HSS in all cases. Evaluate working conditions and costs to decide whether the higher price of HSSE justifies your specific requirements.

Twist Drill — HSS‑G, 6 mm Diameter, 135° Tip, Model Spezial, with Multi‑Bevel Cutting Edge and Triangular Shank, DIN 338 The Twist Drill is a precision HSS‑G metal drill designed for fast, low‑force penetration in harder materials and suitable for hand drills and drilling machines. High-performance HSS‑G for metal drilling 135° tip for harder materials Triangular shank ensures secure clamping Conforms to DIN 338 for short twist drills Ground tip for burr‑free hole starts Drill faster with less effort for demanding metalwork Engineered for efficiency, the HSS‑G construction of this Twist Drill delivers notably higher cutting performance: the specially ground geometry enables up to 40% faster drilling while requiring around 50% less axial force compared with conventional HSS drills. This means less operator fatigue and shorter cycle times when working with alloyed and unalloyed Steel, Cast Steel and Tempered Castings. The reduced required pressure also lowers the risk of tool deflection, so holes remain concentric and tolerances easier to maintain. Clean entry and precise centring for high‑quality holes Thanks to the 135° tip angle and the ground point, the Twist Drill provides a controlled start and produces holes with minimal burr formation. A larger tip angle is particularly advantageous when penetrating harder materials such as Stainless Steel because it shortens the initial bite into the workpiece and reduces chattering. Users benefit from cleaner edges that reduce or eliminate secondary deburring steps and improve the fit for subsequent fastening or reaming operations. Robust design for portable and machine use The combination of a multi‑bevel cutting edge and a triangular shank makes this Twist Drill versatile for both cordless Hand Drills and stationary Drilling Machines. The 3‑flat shank prevents rotation in quick‑change chucks and adapters, improving torque transmission and safety in assembly environments. For technicians who switch between workshop benches and on‑site work, this design reduces setup time and ensures consistent performance across different drill drivers. Standards and application scope you can rely on Manufactured to DIN 338 as a short Twist Drill and offered in the Spezial series by MetavCUT, this tool is aimed at metalworking tasks where speed and surface quality matter. It is suitable for Steel, Cast Iron, Non‑Ferrous Metals, Aluminium and many hard Plastics. The clear standardisation under DIN 338 guarantees dimensional conformity and interchangeability, which simplifies tool management and replacement in professional shops. Strong recommendation: Choose the MetavCUT Twist Drill for demanding metal applications — for technical advice or to confirm suitability for your tasks, contact METAV Werkzeuge by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271; METAV Werkzeuge offers comprehensive and competent consultation to ensure the right tool selection. Bezeichnung: Twist Drill Brand: MetavCUT SKU: 55060-FDA Diameter: 6 mm Spiral Length: 57 mm Total Length: 93 mm Tip Angle: 135° Material: HSS‑G Series: Spezial Shank Execution: with multi‑bevel cutting edge and triangular shank Application: Drills for metal Standard: DIN 338 Suitable For Machine: Hand Drill / Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill suitable for? The MetavCUT Twist Drill is intended primarily for metalworking and performs well in alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Castings, Non‑Ferrous Metals and hard Plastics; its HSS‑G composition and ground geometry make it particularly effective where high penetration and edge quality are required. Can the MetavCUT Twist Drill be used in cordless drills? Yes, the MetavCUT Twist Drill with its Triangular Shank is designed for efficient use in cordless Hand Drills as well as in stationary Drilling Machines; the 3‑flat shank improves clamping security and torque transmission for portable applications. For what is a Twist Drill used? A Twist Drill is mainly used for machining high‑strength materials and larger drill diameters; its shape allows straightforward regrinding and it withstands substantial loads during cutting. Which three drill types exist? The main categories are metal drills (metal drill), wood drills (wood drill) and masonry/concrete drills (stone/concrete drill). Why are Twist Drills pointed? Pointing reduces the cross‑cut at the tip of the Twist Drill; by sharpening the point, friction forces are significantly lowered so that less feed force is necessary while the tip centres better in the workpiece. Can a Twist Drill be used to drill wood? A metal (HSS) drill such as the Twist Drill can be used in wood, but guidance is inferior and the finish is not as clean as with dedicated wood drills; however, HSS drills are easier to regrind and have lower self‑feeding tendencies. For which drilling depths is the Twist Drill the most used tool? A solid hole is typically made with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool. What is better, HSS or HSSE? The general belief that HSSE steels are categorically superior to standard HSS is incorrect; when choosing, consider whether the working conditions justify the higher acquisition cost of HSSE for your application.

Spiralbohrer Profi Line (7,5 mm, 135°, linksschneidend, HSS-G, DIN 338) von MetavCUT Der Spiralbohrer Profi Line ist ein linksschneidender HSS-G Bohrer für Metallbearbeitung, der speziell für Ausbohren festsitzender Schrauben und anspruchsvolle Werkstattaufgaben entwickelt wurde Linksschneidend für Ausbohren fest sitzender Schrauben 135° Spitzenwinkel für harte Werkstoffe HSS-G Material: hohe Zähigkeit und Wärmebeständigkeit Kurze Spiralform nach DIN 338 für stationäre Maschinen Schnelleres Bohren bei geringer Anpresskraft für effiziente Werkstattarbeit Der Profi Line Bohrer kombiniert das bewährte HSS-G Material mit einer linksschneidenden Geometrie, wodurch sich die Bohrleistung in vielen Anwendungen verbessert. Dank der speziellen Spanwinkel ist ein bis zu 40 % schnelleres Bohren möglich, und die benötigte Anpresskraft reduziert sich deutlich. Dies führt zu kürzeren Bearbeitungszeiten und geringerer Ermüdung beim Anwender, vor allem bei wiederkehrenden Reparaturarbeiten und Montageaufgaben. Verlässliche Materialeigenschaften und Normkonformität für sichere Auswahl Die Fertigung nach DIN 338 garantiert klare Spezifikationen für kurze Spiralbohrer mit Zylinderschaft. Das HSS-G legt die Grundlage für hohe Zähigkeit und Temperaturbeständigkeit beim Bohren in legierten und unlegierten Stählen. Der 135° Spitzenwinkel erleichtert das Anbohren harter Werkstoffe wie Edelstahl und reduziert das Auslaufen, was die Genauigkeit bei der Bohrung erhöht. Optimiert für die Praxis: Anwendung, Maschine und Material Dieser Bohrer ist besonders geeignet für die Bearbeitung von Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss und Nichteisenmetallen sowie Hartkunststoff. Die linksschneidende Ausführung unterstützt gezielt das Entfernen festsitzender Schrauben, sofern eine Bohrmaschine mit Linkslauf verwendet wird. In Werkstatt und Instandhaltung ermöglicht der Bohrer effiziente Eingriffe, die sowohl bei stationären Maschinen als auch bei geeigneten Handbohrmaschinen zum Einsatz kommen. Praxistipps für sicheres Arbeiten und lange Standzeiten Für präzise Ergebnisse empfiehlt sich bei kritischen Passungen vorheriges Anpunkten mit einem Zentrierbohrer; bei Durchmessern im Standardbereich reicht oft direktes Bohren aus. Kühlung und moderate Schnittgeschwindigkeiten verlängern die Standzeit des HSS-G Werkzeugs. Bei Unsicherheiten zur geeigneten Schnittgeschwindigkeit oder zur Wahl der Aufnahme empfiehlt sich die Beratung durch Fachpersonal, um Materialschäden und vorzeitigen Werkzeugverschleiß zu vermeiden Empfehlung: MetavCUT Profi Line wählen für professionelle Metallbearbeitung und bei fachspezifischen Fragen die Beratung von METAV Werkzeuge in Anspruch nehmen – info@metav-werkzeuge.com, Tel. +49 2822 7131930 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 60075-FDA Durchmesser: 7,5 mm Spitzenwinkel: 135° Material: HSS-G Ausführung: linksschneidend Norm: DIN 338 Modellserie: Profi Line Anwendung: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der MetavCUT Spiralbohrer Profi Line für das Ausbohren festsitzender Schrauben geeignet? Der MetavCUT Spiralbohrer Profi Line ist speziell linksschneidend geschliffen und damit für das Herausdrehen von Schraubenresten unter Verwendung einer Bohrmaschine mit Linkslauf besonders geeignet. In welche Materialien kann der MetavCUT Spiralbohrer Profi Line eingesetzt werden? Der MetavCUT Spiralbohrer Profi Line eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle sowie Hartkunststoff. Brauche ich eine spezielle Bohrmaschine für den MetavCUT Spiralbohrer Profi Line? Für den optimalen Einsatz des MetavCUT Spiralbohrer Profi Line wird eine Bohrmaschine mit Linkslauf empfohlen; für allgemeine Metallarbeiten ist der Bohrer auch an geeigneten Handbohrmaschinen einsetzbar. Entspricht der MetavCUT Spiralbohrer Profi Line der Norm DIN 338 und was bedeutet das? Ja, der MetavCUT Spiralbohrer Profi Line entspricht DIN 338, was die Einordnung als kurzer Spiralbohrer mit Zylinderschaft und damit klar definierte Fertigungs- und Leistungsmerkmale sicherstellt. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#60075-FDA","sku":"60075-FDA","mpn":"60075-FDA","name":"Spiralbohrer 60075-FDA","description":"Spiralbohrer Profi Line, 7,5 mm, 135° Spitzenwinkel, linksschneidend, HSS-G; Kurzspiralbohrer nach DIN 338 für Metallbearbeitung und Ausbohren festsitzender Schrauben; Geeignet für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"7,5 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Ausführung","value":"linksschneidend"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Modellserie","value":"Profi Line"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Preis netto","value":"6.94 EUR"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der MetavCUT Spiralbohrer Profi Line für das Ausbohren festsitzender Schrauben geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer Profi Line ist linksschneidend geschliffen und eignet sich für das Ausbohren festsitzender Schrauben bei Verwendung einer Bohrmaschine mit Linkslauf."}},{"@type":"Question","name":"In welche Materialien kann der MetavCUT Spiralbohrer Profi Line eingesetzt werden?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer Profi Line ist geeignet für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle sowie Hartkunststoff."}},{"@type":"Question","name":"Brauche ich eine spezielle Bohrmaschine für den MetavCUT Spiralbohrer Profi Line?","acceptedAnswer":{"@type":"Answer","text":"Für optimales Ergebnis wird eine Bohrmaschine mit Linkslauf empfohlen; für allgemeine Metallarbeiten ist der MetavCUT Spiralbohrer Profi Line auch an geeigneten Handbohrmaschinen einsetzbar."}},{"@type":"Question","name":"Entspricht der MetavCUT Spiralbohrer Profi Line der Norm DIN 338 und was bedeutet das?","acceptedAnswer":{"@type":"Answer","text":"Ja, der MetavCUT Spiralbohrer Profi Line entspricht DIN 338; das bedeutet Einordnung als kurzer Spiralbohrer mit Zylinderschaft und definierten Fertigungs‑ und Leistungsmerkmalen."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/spiralbohrer-60075-fda","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Profi Line"},{"@type":"Thing","name":"Linksschneidender HSS-G Bohrer"},{"@type":"Thing","name":"DIN 338 kurze Spiralbohrer"}],"mentions":[{"@type":"Thing","name":"Anwendung: Ausbohren festsitzender Schrauben"},{"@type":"Thing","name":"Geeignet für Stahl und Nichteisenmetalle"},{"@type":"Thing","name":"135° Spitzenwinkel für harte Werkstoffe"}]}]}

MetavCUT Twist Drill (Twist Drill, HSS‑G, Ø 7.5 mm, 135°) The MetavCUT Twist Drill is a precision metalworking Twist Drill designed for fast, clean holes in alloyed and unalloyed steels and other hard materials HSS‑G Material for high wear resistance 135° Tip angle for harder workpieces Triangular shank for secure tool retention Complies with DIN 338 for short twist drills Faster, cleaner metal drilling with less effort The specially ground HSS‑G geometry achieves notably higher productivity: tests show up to 40% faster drilling with approximately 50% less feed force compared with conventional HSS drills. This efficiency translates into reduced operator fatigue and shorter cycle times on both stationary and portable equipment. The optimised cutting edge aids in stable cutting, resulting in smoother hole walls and fewer rework operations. Robust design for professional workflows Constructed to DIN 338 standards, the short-cylinder form ensures consistent concentricity and repeatable performance in production environments. The triangular shank guarantees secure engagement in chucks and quick-change adaptors, preventing slippage during high-torque applications. The combination of a precision W-style tip and the hardened HSS‑G substrate provides extended tool life and resistance to the micro-welding that commonly affects drilling in tougher alloys. Broad suitability across demanding materials Engineered primarily as a Drill for Metal, this twist drill is suitable for alloyed and unalloyed steel, cast steel and cast iron, sintered and tempered materials, non‑ferrous metals such as aluminium and brass, and hard plastics. For softer materials such as wood or very soft plastics, performance is acceptable but guidance on feed and speed should be adjusted. The 135° tip angle is particularly effective when working with stainless steels and other higher‑strength materials. Practical advantages and recommended use With a spiral length of 69 mm and an overall length of 109 mm, the geometry balances chip evacuation with rigidity for Ø 7.5 mm diameters. The reduced point angle lowers the tendency to "grab" on entry and improves centring on flat surfaces, so pre‑drilling or spot‑facing is often unnecessary for many production tasks. Use moderate cutting speeds, adequate coolant or lubrication for ferrous materials, and clamp the workpiece securely to exploit the drill’s full potential. Strong recommendation: Choose the MetavCUT high‑performance Twist Drill for faster, more precise metal holes — for technical advice or to confirm suitability for your application contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271_ Designation: Twist Drill Brand: MetavCUT SKU: 55075-FDA Diameter: 7.5 mm Spiral Length: 69 mm Overall Length: 109 mm Material: HSS‑G Tip Angle: 135° Shaft Execution: with multi‑bevel cutting edge and triangular shank Model Series: Spezial Application: Drills for metal For Drilling Machine: Drilling Machine Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill (Twist Drill) is primarily applied to machining high‑strength materials and larger diameters; it is easy to resharpen and remains stable under greater loads, making it suitable for demanding metalworking tasks where clean, burr‑free holes are required. Which three drill types exist? The main categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill family and is optimised for alloys, cast materials and hard plastics. Why are Twist Drills pointed? The pointing reduces the cross‑cut at the tip, which significantly lowers friction and therefore the required feed force; a sharpened tip helps centre the Twist Drill more reliably in the workpiece and reduces the tendency to wander on start.

Twist Drill — left-cutting HSS‑G metal drill, Ø 7 mm, 135° (DIN 338) by MetavCUT The Twist Drill is a left‑cutting metal drill bit for Drilling Machine use, designed for fast, precise removal of broken or seized screws and reliable machining of alloyed and unalloyed steels. Left‑cutting geometry for screw extraction and reverse drilling HSS‑G material for high wear resistance 135° point angle for harder materials like stainless steel Conforms to DIN 338 for short cylindrical shank bits Optimised cutting: up to 40% faster drilling with less thrust Faster results when extracting screws and working in reverse The left‑cutting geometry of this bit gives a decisive advantage when encountering broken or jammed screws: the cutting lips are ground so the drill cuts correctly in left rotation, which often helps to unscrew and remove the damaged fastener while drilling. This construction also reduces the tendency to pull the bit into the workpiece and, in many cases, allows for a more controlled extraction process. The left‑cutting feature therefore converts a common workshop problem into a predictable, solvable task. Durable performance through HSS‑G and Profi Line engineering Manufactured from HSS‑G, this Twist Drill offers elevated hardness and heat resistance compared with standard HSS grades, resulting in longer tool life under high loads. The Profi Line design emphasises dimensional accuracy and consistent edge geometry, so wear patterns remain predictable and regrinding is straightforward. For users who need repeatable performance in tougher materials, the combination of HSS‑G and professional series quality translates into fewer tool changes and less downtime. Optimised point angle for hard materials and reduced walking A 135° point angle is specified for improved centring and longer edge life when machining harder materials such as stainless steel and cast components. The flatter point reduces penetration shock and helps avoid chatter at the start of a hole. In practical terms, this means cleaner entry holes and better control when drilling alloys and tempered steels, especially in combination with an appropriate coolant and steady feed. Standardised dimensions for reliable machine compatibility This Twist Drill is produced to DIN 338, the classification for short twist drills with cylindrical shank, which ensures compatibility with a wide range of bench and portable drilling machines. The Ø 7 mm diameter and standard shank dimensions permit quick clamping and stable rotation in chucks and collets. Choosing a DIN‑compliant bit reduces the risk of misfits and simplifies tool inventory management for workshops and industrial operations. Practical benefits for workshop and maintenance applications Beyond material and geometry, this bit is tailored for real workshop needs: reduced thrust force during cutting can make hand‑held drilling less strenuous and improve operator control, while the left‑cutting option expands the bit’s usefulness for maintenance tasks such as extracting corroded or stripped screws. The resulting time savings and increased first‑pass success rate benefit both craftspersons and production teams with frequent metalworking demands. Simple explanation of key terms for everyday use If the terminology is unfamiliar, here is a brief guide: left‑cutting means the flutes and cutting edges are ground to cut effectively when the spindle turns counterclockwise; HSS‑G is a high‑speed steel grade with enhanced properties for heavy cutting; a 135° point angle produces a flatter tip suited to hard materials; and DIN 338 specifies short, cylindrical‑shank twist drills commonly used in metalworking. These characteristics combine to make the bit a specialist solution rather than a general‑purpose wood or masonry tool. Choose the MetavCUT Profi Line Twist Drill with 7 mm diameter and 135° point angle for demanding metalwork — for personalised technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Bezeichnung: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 60070-FDA Durchmesser: 7 mm Spitzenwinkel: 135° Ausführung: left cutting (linksschneidend) Typ: Twist Drill for Drilling Machine Material: HSS‑G Norm: DIN 338 Modellserie: Profi Line Anwendung: Drills for metal (Bohrer für Metall) Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill from MetavCUT best used for The MetavCUT Twist Drill is primarily intended for metalworking, with a particular strength in extracting broken or seized screws thanks to its left‑cutting geometry; it is also suitable for drilling alloyed and unalloyed steels when used in a Drilling Machine. Does the MetavCUT Profi Line Twist Drill require a special machine? The MetavCUT Profi Line Twist Drill needs a drilling machine capable of running in reverse (left rotation) to exploit the left‑cutting grind; for conventional forward drilling the same DIN 338 bit shape is compatible with standard chucks, but screw‑extraction performance requires left rotation. For what is a Twist Drill used A Twist Drill is mainly applied to the machining of high‑strength materials and larger drill diameters; the shape is easy to regrind and withstands higher loads, which makes it suitable for demanding metalwork and repair tasks. Which three drill types exist There are three principal drill types: Metal drills, Wood drills, and Stone/Concrete drills. Why are twist drills pointed Pointing a Twist Drill reduces the cross‑cut at the tip; this lowers friction and therefore reduces required thrust force while improving centring of the drill tip in the workpiece. Can a Twist Drill be used for wood A Metal drill can be used in wood, but guidance and finish will be inferior compared with a purpose‑made wood drill; metal drills are easier to regrind and usually have less self‑feeding action. For which drilling depths is the Twist Drill most used A through hole in solid material is commonly produced with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm the Twist Drill is the most frequently used tool. Is HSS or HSSE better The common belief that HSSE steels are always superior to HSS is incorrect; you should evaluate whether the working conditions justify the higher cost of HSSE before deciding.

Twist Drill (Twist Drill) – Ø 7 mm · 135° tip · HSS‑G · DIN 338 · with W‑point and triangular shank · Model: Spezial · Brand: MetavCUT The Twist Drill is a precision metal‑drilling tool for handheld and machine use, designed to deliver fast, centred holes in steels, non‑ferrous metals and engineering plastics. Rapid drilling performance with HSS‑G material 135° tip for cleaner entry in hard materials Triangular shank for secure grip in cordless drills Conforms to DIN 338 for short twist drills Special W‑point grind reduces required feed force Faster, cleaner holes in demanding materials The Twist Drill made from HSS‑G combines high cutting speed with good wear resistance, so drilling progress is noticeably quicker than with conventional HSS drills. The 135° tip angle is optimised for harder workpieces such as stainless steel and other tough alloys, meaning reduced wandering at the start and cleaner hole edges. For users this translates into less rework and more precise bores even under repetitive use. Efficient power transfer and easy handling with handheld tools The design with a triangular shank ensures a positive fit in chucks and quick torque transmission, ideal for use with a Drilling Machine or cordless hand drills. The integrated W‑point (multi‑bevel cutting edge) improves centring and reduces the required axial force, so less effort is needed during operation and the risk of drill deflection is lower. Professionals benefit from faster cycle times and safer handling on the job. Application range and target users This Spezial series Twist Drill is intended primarily for metalworking: alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. It is therefore particularly suitable for workshop technicians, toolmakers and maintenance teams who need a reliable general‑purpose metal drill. The robust geometry also makes it useful for occasional work in aluminium and wood where a durable, resharpenable drill is preferred. Standards, maintenance and technical advantages Manufactured to DIN 338, the short twist drill geometry ensures compatibility with industry expectations for short HSS drills with cylindrical or polygonal shanks. The HSS‑G substrate allows resharpening without significant loss of accuracy, extending tool life when compared to coated disposable types. A correctly reground W‑point preserves centring and chip evacuation, reducing heat build‑up and helping to maintain hole quality over repeated sharpening cycles. We recommend the MetavCUT Spezial Twist Drill for tradespeople and engineers who require fast, precise drilling in metals and engineering plastics; for further technical advice or to confirm suitability for a specific application please contact METAV Werkzeuge — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 55070-FDA Diameter: 7 mm Tip angle: 135° Material: HSS‑G Spiral length: 69 mm Overall length: 109 mm Shaft execution: with W‑point and triangular shank Model series: Spezial Norm: DIN 338 Application: Drills for metal For use with: Handbohrmaschine / Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill (Twist Drill) be used on? The MetavCUT Twist Drill is designed for metalworking and performs well in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals, aluminium and hard plastics; its geometry and HSS‑G material also allow occasional use in wood where a resharpenable metal drill is acceptable. What are the three main drill types? The three main drill types are metal drills, wood drills and stone/concrete drills, each optimised in geometry and material for the specific substrate and cutting conditions.

Twist Drill — Left-cutting Metal Drill, 8.5 mm, 135°, HSS‑G, DIN 338 (Profi Line by MetavCUT) The Twist Drill left‑cutting metal drill is designed for controlled drilling and extraction tasks in metalwork when used with a compatible Drilling Machine. Left‑cutting design for screw extraction Optimised for hard metals with 135° tip angle Made from durable HSS‑G for long tool life Conforms to DIN 338 for short cylindrical shank drills Profi Line quality from MetavCUT for professional use Faster metalworking with optimised HSS‑G performance The HSS‑G alloy provides a reliable balance of hardness and toughness, enabling consistent performance when machining alloyed and unalloyed steels. With an 8.5 mm cutting diameter and a 135° tip angle, this left‑cutting Twist Drill penetrates harder materials more smoothly and reduces the risk of workpiece damage. The hardened material and precise geometry translate into measurable time savings and lower tool wear during repetitive metal drilling tasks. Left‑cutting geometry that solves difficult jobs The left‑cutting (linksschneidend) grind is specifically made to cut correctly in counterclockwise rotation. This feature is particularly useful for removing broken or seized screws because the cutting action can aid in extracting the screw remnant as it drills. When used with a Drilling Machine capable of left rotation, the left‑cutting Twist Drill requires significantly less axial force and often completes extraction tasks with greater control than standard drills. Built for professionals and compliant with standards Manufactured in the Profi Line series and meeting DIN 338, this Twist Drill is intended for metalworking on stationary or portable machines. The short cylindrical shank design suits typical chucks and fixtures, while the standardised dimensions make tool replacement straightforward. For professionals demanding consistent results, the MetavCUT model offers reproducible hole quality and reliable centring thanks to its precise tip geometry. Practical explanation of key terms for informed use A 135° tip angle means the drill tip is flatter than a standard 118° geometry; this reduces initial bite when approaching tough metals and improves centring on hardened surfaces. "Left‑cutting" indicates the helix and cutting lips are ground to cut in left rotation; therefore a Drilling Machine must support reverse rotation for correct use. DIN 338 classifies short spiral drills with cylindrical shanks made of high‑speed steel, ensuring interchangeability and defined manufacturing tolerances. We recommend the MetavCUT Profi Line Left‑cutting Twist Drill for demanding metal extraction and drilling tasks — for expert advice or additional technical data contact METAV Werkzeuge at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Specifications Designation: Twist Drill Brand: MetavCUT SKU: 60085-FDA Diameter: 8.5 mm Tip Angle: 135° Execution: Left‑cutting For Drilling Machine: Drilling Machine (Handbohrmaschine) Material: HSS‑G Norm: DIN 338 Model Series: Profi Line Application: Drills for metal Packaging Unit: 5 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Can this left‑cutting Twist Drill be used in a standard drill? The MetavCUT left‑cutting Twist Drill is suitable for machines that offer left (counterclockwise) rotation; using it in a standard right‑hand rotation drill will prevent proper cutting action, so ensure the Drilling Machine supports reverse rotation before use. Which materials is the MetavCUT Twist Drill best for? The MetavCUT Twist Drill in HSS‑G is optimised for metals including alloyed and unalloyed steels, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics, offering reliable performance when machining these materials. For what is a Twist Drill used? A Twist Drill is primarily applied to the machining of high‑strength materials and larger hole diameters; its form is easy to regrind and withstands high loads, making it ideal for drilling into metals and for tasks such as drilling out broken or seized screws. Which 3 drill types exist? Common drill types are Metal drills, Wood drills, and Masonry/Concrete drills, each designed with geometries and materials suited to their specific applications.

MetavCUT Twist Drill HSS‑G 8.5 mm (Twist Drill, DIN 338, 135°) The Twist Drill HSS‑G 8.5 mm is a precision metalworking drill designed for use with Hand and Stationary Drilling Machines, optimised for rapid, burr‑free holes in steel, cast iron and non‑ferrous materials. HSS‑G Material for high wear resistance 135° Tip for cleaner entry in hard materials Triangular shank for secure grip in Drilling Machines Conforms to DIN 338 short twist drill standard Rapid‑ground geometry reduces feed force and drilling time Faster metal drilling with less operator effort and consistent results The specially ground HSS‑G construction of this Twist Drill translates into tangible productivity: up to 40% faster drilling and approximately 50% less feed force compared with conventional HSS drills, as achieved by the optimized cutting geometry. This means shorter cycle times on production tasks and less physical strain during repetitive work. The 135° tip angle is tailored for harder materials, improving centring and reducing walking at the start of the hole to deliver neat, burr‑reduced results. Reliable performance across a wide range of engineering materials Designed for machining alloyed and unalloyed steels, cast and sintered irons, non‑ferrous metals, aluminium and hard plastics, the Twist Drill offers versatility for everyday workshop and industrial applications. The rapid ground point ensures clean hole edges and steady chip evacuation, which is particularly beneficial when working with tougher materials or when achieving a high surface quality of the bore is required. Secure clamping and compatibility with cordless and bench units The triangular shank (3‑flat shank) provides a positive drive in chucks and quick‑change holders, making the drill ideal for efficient use with cordless screwdrivers as well as conventional Drilling Machines. The overall length and flute geometry are matched to the DIN 338 classification for short twist drills, so users can expect consistent handling characteristics and straightforward integration into existing tool assortments. Practical advantages for professional workshops and assemblers Because the point geometry reduces required thrust, tool life can be extended and the risk of drill breakage diminished during deep or repetitive holes. The combination of rapid‑ground tip and HSS‑G material also simplifies regrinding for maintenance, giving workshops a cost‑efficient balance between performance and serviceability. For operators seeking both speed and longevity in metal drilling, this drill delivers measurable benefits. Expert support and technical consultation when needed If it is unclear whether this Twist Drill meets specific application demands or if additional technical data is required, METAV Werkzeuge offers comprehensive and competent consultation. Experienced advisers can help with material‑specific recommendations, suitable drilling speeds and feeds, or selection of complementary tooling to optimise your production process. Contact METAV Werkzeuge for tailored support by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 We recommend the MetavCUT Twist Drill HSS‑G for demanding metalworking applications — for personalised advice and application support please contact METAV Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Twist Drill (Twist Drill) Marke: MetavCUT SKU: 55085-FDA Diameter: 8.5 mm Material: HSS‑G Tip Angle: 135° Overall Length: 117 mm Spiral Length: 75 mm Shaft Execution: with multi‑bevel cutting edge and triangular shank Application: Drills for metal Standard: DIN 338 Series: Spezial (Special) Suitable For: Handbohrmaschine / Drilling Machine Packaging Unit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and where does the MetavCUT Twist Drill perform best? The MetavCUT Twist Drill is primarily used for drilling in high‑strength materials and larger diameters; it is especially suited to alloyed and unalloyed Steel, Cast Iron, Sintered Iron, Non‑Ferrous Metals and Hard Plastics. Its design allows easy regrinding and it withstands higher mechanical loads while delivering clean starts and burr‑reduced holes. Which three drill types exist and how does the MetavCUT Twist Drill relate to them? The three common drill types are Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill belongs to the Metal drill category and is optimised for use in metalworking applications rather than woodworking or masonry.

Spiralbohrer 8 mm, 135° Spitzenwinkel, linksschneidend, HSS‑G, DIN 338, Profi Line von MetavCUT Der Spiralbohrer ist ein linksschneidender HSS‑G Kurzspiralbohrer nach DIN 338 und wurde für effiziente Metallbearbeitung und das Ausbohren festsitzender Schrauben entwickelt. HSS‑G für erhöhte Verschleißfestigkeit 135° Spitzenwinkel für harte Werkstoffe Linksschneidend zum Ausdrehen festsitzender Schrauben DIN 338: kurze Spiralbohrer mit Zylinderschaft Kompatibel mit Handbohrmaschine und stationären Maschinen Schnelleres Bohren durch linksschneidende Geometrie Die linksschneidende Ausführung reduziert beim Einsatz in Linkslauf die erforderliche Anpresskraft und erleichtert besonders das Ausbohren von abgebrochenen oder festsitzenden Schrauben. Ein geschliffener HSS‑Bohrer dieser Geometrie kann das Bohren um bis zu 40 % beschleunigen und benötigt bis zu 50 % weniger Anpresskraft im Vergleich zu herkömmlichen HSS‑Bohrern. Dadurch werden Arbeitstempo und Ergonomie in Werkstatt und Montage spürbar verbessert, ohne das Material unnötig zu belasten. Robustheit und Standzeit dank HSS‑G und Normkonformität Die Verwendung von HSS‑G sorgt für hohe Zähigkeit und thermische Beständigkeit bei der Bearbeitung von legierten und unlegierten Stählen sowie Gusswerkstoffen. Die Einhaltung der DIN 338 garantiert die typische Formgebung kurzer Spiralbohrer mit Zylinderschaft und damit reproduzierbare Maße und Toleranzen für den industriellen Einsatz. Für Anwender bedeutet das planbare Standzeiten und einfache Austauschbarkeit in Werkzeughaltern. Geeignet für verschiedene Maschinen und Materialien Dieser Kurzspiralbohrer ist ausgelegt für den Einsatz in Handgeführten Bohrmaschinen ebenso wie in stationären Geräten mit Zylinderschaftaufnahme. Der 135° Spitzenwinkel vereinfacht das Anbohren von härteren Werkstoffen wie Edelstahl und reduziert das Durchbiegen bei schmalen Bohrdurchmessern. Empfohlen wird das gezielte Vorbohren bei tiefen Bohrungen und das Anpassen von Schnitt- und Vorschubwerten an das jeweilige Werkstoffverhalten. Zielgruppe und besondere Anwendungsvorteile Mechaniker, Instandhalter und Metallverarbeiter profitieren von der Kombination aus Linkslauf‑Funktion und robuster Materialwahl. Die linksschneidende Schneide ist speziell für Reparaturfälle konzipiert, in denen das gleichzeitige Bohren und Herausdrehen festsitzender Schrauben Zeit spart. Die Profi Line‑Ausführung von MetavCUT stellt zudem sicher, dass das Werkzeug wiederholbar präzise Ergebnisse in Werkstatt und Produktion liefert. Bestellen Sie den MetavCUT Profi Line Spiralbohrer mit 8 mm Durchmesser und 135° Spitzenwinkel für effiziente und sichere Metallbearbeitung – bei Fragen berät METAV Werkzeuge gern per eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 60080-FDA Durchmesser: 8 mm Spitzenwinkel: 135° Ausführung: linksschneidend Material: HSS‑G Modellserie: Profi Line Norm: DIN 338 Anwendung: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine, stationäre Maschinen geeignet Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der Spiralbohrer von MetavCUT in Profi Line Ausführung mit 135° Spitzenwinkel eignet sich gut für härtere Werkstoffe wie Edelstahl, da der flachere Spitzenwinkel das Eindringen erleichtert und die Kerbwirkung reduziert. Kann ich den Spiralbohrer MetavCUT mit einer normalen Handbohrmaschine verwenden? Ja, der Spiralbohrer von MetavCUT ist für die Verwendung in Handbohrmaschine und stationären Maschinen ausgelegt; bei linksschneidender Nutzung wird jedoch eine Bohrmaschine mit Linkslauf benötigt, um den vollen Nutzen beim Ausdrehen festsitzender Schrauben zu erzielen. Wie unterscheidet sich der HSS‑G Spiralbohrer von anderen Schnellarbeitsstählen? Der HSS‑G Werkstoff des Spiralbohrers von MetavCUT bietet eine hohe Zähigkeit und Temperaturbeständigkeit, was vor allem beim Bohren in legierten Stählen und Gussmaterialien zu längeren Standzeiten führt. Brauche ich ein Vorbohren vor dem Einsatz des Spiralbohrers von MetavCUT bei großen Tiefen? Bei tiefen Bohrungen empfiehlt es sich, vor allem bei Durchmessern über das Fünffache der Bohrtiefe, mit einem kleineren Zentrierbohrer vorzubohren; der Spiralbohrer von MetavCUT ist primär als Kurzspiralbohrer für präzise, nicht-extrem tiefe Bohrungen nach DIN 338 konzipiert. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#60080-FDA","sku":"60080-FDA","mpn":"60080-FDA","name":"Spiralbohrer 8 mm 60080-FDA","description":"Linksschneidender HSS-G Kurzspiralbohrer nach DIN 338 mit 8 mm Durchmesser und 135° Spitzenwinkel, entwickelt für effiziente Metallbearbeitung und das Ausbohren festsitzender Schrauben; geeignet für Handbohrmaschine und stationäre Maschinen; Profi Line von MetavCUT.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"8 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Ausführung","value":"linksschneidend"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Modellserie","value":"Profi Line"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine, stationäre Maschinen geeignet"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer MetavCUT Spiralbohrer mit 8 mm Durchmesser und 135° Spitzenwinkel eignet sich gut für härtere Werkstoffe wie Edelstahl, da der flachere Spitzenwinkel das Eindringen erleichtert und die Kerbwirkung reduziert."}},{"@type":"Question","name":"Kann ich den Spiralbohrer MetavCUT mit einer normalen Handbohrmaschine verwenden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer MetavCUT Spiralbohrer ist für die Verwendung in Handbohrmaschine und stationären Maschinen ausgelegt; für den vollen Nutzen der linksschneidenden Ausführung wird eine Bohrmaschine mit Linkslauf benötigt."}},{"@type":"Question","name":"Worin unterscheidet sich der HSS-G Spiralbohrer von anderen Schnellarbeitsstählen?","acceptedAnswer":{"@type":"Answer","text":"Der HSS-G Werkstoff des Spiralbohrers MetavCUT Spiralbohrer bietet hohe Zähigkeit und Temperaturbeständigkeit, was beim Bohren in legierten Stählen und Gussmaterialien zu längeren Standzeiten führt."}},{"@type":"Question","name":"Brauche ich ein Vorbohren bei großen Tiefen mit dem MetavCUT Spiralbohrer?","acceptedAnswer":{"@type":"Answer","text":"Bei tiefen Bohrungen empfiehlt sich Vorbohren; der MetavCUT Spiralbohrer ist als Kurzspiralbohrer nach DIN 338 primär für präzise, nicht-extrem tiefe Bohrungen konzipiert."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/spiralbohrer-60080-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Serie Profi Line"},{"@type":"Thing","name":"Kurzspiralbohrer nach DIN 338"},{"@type":"Thing","name":"Linksschneidende Ausführung für Ausbohren festsitzender Schrauben"}],"mentions":[{"@type":"Thing","name":"HSS-G Material"},{"@type":"Thing","name":"135° Spitzenwinkel"},{"@type":"Thing","name":"Handbohrmaschine und stationäre Maschinen kompatibel"}]}]}

Twist Drill Spezial – 8 mm, 135° point, HSS‑G, DIN 338, with multi‑bevel cutting edge and triangular shank (MetavCUT) The Twist Drill Spezial is a precision metal drilling tool designed for drilling machines and cordless drills, optimised for hard and alloyed steels as well as a wide range of metals. High‑performance HSS‑G for durable drilling 135° point for clean starts in hard materials Triangular shank ensures secure grip in chucks Conforms to DIN 338 for standardised short twist drills Faster, more efficient metalworking for demanding tasks The specially ground HSS‑G geometry of this tool delivers up to 40% faster drilling and requires around 50% less feed force compared with conventional HSS drills, which directly reduces operator fatigue and cycle times. This performance advantage means fewer tool changes and higher throughput in workshop environments. For fabrication and production settings where speed and repeatability matter, the reduced thrust requirement also lowers the load on cordless and stationary machines, extending battery life and reducing wear on the machine spindle. Durable material and tip design for precise, burr‑free holes Made from HSS‑G, the drill combines toughness and heat resistance to resist softening at elevated cutting temperatures; this yields longer tool life on steel and cast materials. The 135° point angle is tailored for harder workpieces and reduces walking at the start of a hole, delivering clean, burr‑free edges. The specially sharpened tip also improves centring and helps to maintain roundness of the drilled hole, which is particularly beneficial when tolerance and surface quality are critical. Wide application range and machine compatibility This Twist Drill Spezial is intended primarily for metalworking and is suitable for alloyed and unalloyed steels, cast steels, cast irons, sintered irons, non‑ferrous metals, hard plastics and even wood where a metal drill is acceptable. The triangular shank offers reliable torque transmission and is especially practical for use with cordless drills and portable machines, while compatibility with stationary drilling machines supports workshop and production use. Users who need a versatile metal drill will appreciate the balance between cutting speed and hole quality. Standards, handling and recommended use for safe results Manufactured to DIN 338, the product meets the standard definition for short twist drills with cylindrical shank, aiding selection and interchangeability. For best results use appropriate cutting fluids when drilling steels and consider slower spindle speeds for larger diameters or harder materials. The 75 mm spiral length and 117 mm overall length are optimised for through‑holes and common workshop applications; the 135° point angle shortens the initial penetration time in harder materials and improves centring during the pilot phase. MetavCUT recommends the Twist Drill Spezial for precision metal drilling — for technical advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com or by phone +49 2822 7131930, WhatsApp +49 170 2837271 Precise Technical Data for Planning and Setup Designation: Twist Drill Spezial 8 mm Brand: MetavCUT SKU: 55080-FDA Type/Series: Spezial Diameter: 8 mm Spiral Length: 75 mm Overall Length: 117 mm Point Angle: 135° Material: HSS‑G Shaft Execution: with multi‑bevel cutting edge and triangular shank Application: Drills for metal For drilling machine: Drilling Machine (Handbohrmaschine) Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The MetavCUT Twist Drill Spezial is mainly used for the machining of high‑strength workpieces and larger drill diameters; it is particularly suitable for alloyed and unalloyed steel, cast materials and non‑ferrous metals. The design allows easier regrinding and maintains performance under higher loads. Which 3 drill types are there? The three common drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Spezial belongs to the metal drill category and is optimised for metalworking tasks. Are you unsure whether this tool meets your requirements or need additional technical data? METAV Werkzeuge provides comprehensive, competent advice for complex or high‑precision tools — contact us by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271.

Introducing the Twist Drill — Left-cutting HSS-G Twist Drill for Drilling Machine, 9.5 mm, 135° (DIN 338) by MetavCUT The Twist Drill is a left-cutting HSS-G drill for Drilling Machines, optimised for metalworking and particularly suitable for extracting broken or seized screws in counterclockwise operations. Left-cutting geometry for screw extraction 9.5 mm Diameter for medium-size metal holes 135° Point Angle for harder materials Manufactured to DIN 338 standard HSS-G material for high wear resistance Faster metalworking and safer screw extraction with left-cutting geometry Left-cutting drills are designed to cut effectively in counterclockwise rotation, which makes them especially useful when a drilling task aims to remove broken or stuck screws. The Left-cutting grind reduces torsional stresses on the workpiece and often causes the screw remnant to rotate out as the drill advances. In practice, this means less time spent on difficult extractions and a reduced need for secondary extraction tools. The left-hand design also helps to prevent accidental forward self-feed in certain setups, increasing process control during repair work. High-performance HSS-G for durability under stress Made from HSS-G, this drill offers a balance of hardness and toughness that suits alloyed and unalloyed steels, Cast Steel, Cast Iron, and non-ferrous metals. The material choice provides improved heat resistance and wear performance during continuous metal cutting tasks. For users who need dependable tool life in workshop or on-site repairs, the HSS-G composition reduces the frequency of regrinding and replacement compared with softer grades, translating into lower downtime and higher overall efficiency. Optimised 135° point angle for demanding materials A 135° point angle reduces the tendency to wander at the start of a hole and improves centring when working with harder materials such as stainless steel. This geometry distributes cutting forces over a larger area, shortening the initial bite time and often allowing faster feed without compromising hole quality. For precise repair operations or when working with tougher alloys, the sharper angle contributes to cleaner entry and more consistent hole profiles. Compliance with DIN 338 and suitability for machine applications Produced to DIN 338, this short twist drill with cylindrical shank follows established dimensions and tolerances for machine use. Conformance to the standard ensures interchangeability and predictable behaviour in rotating machine tools, whether stationary or portable Drilling Machines. The standardised form also simplifies tool selection for workshops that require consistent performance across different diameters and makes reconditioning processes more straightforward. Who benefits from this drill and how to apply it Crafted for technicians, maintenance engineers and professional metalworkers, the left-cutting Twist Drill from MetavCUT excels where controlled counter-rotation and resilience are required. It is ideal for extraction tasks, repair operations and general metal drilling up to medium diameters. When used with a machine capable of left-hand rotation and appropriate coolant or cutting lubricant, the drill achieves higher penetration rates and reduced operator effort compared with conventional HSS variants. For reliable left-cutting performance choose the MetavCUT Twist Drill — for product advice or technical support contact METAV Werkzeuge: info@metav-werkzeuge.com • Tel +49 2822 7131930 • WhatsApp +49 170 2837271 Bezeichnung: Twist Drill Brand: MetavCUT SKU: 60095-FDA Diameter: 9.5 mm Point Angle: 135° Execution: Left-cutting Material: HSS-G Standard: DIN 338 Model Series: Profi Line For Machine Type: Drilling Machine Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and when is left-cutting advantageous? The MetavCUT Twist Drill with left-cutting geometry is mainly used for machining high-strength materials and for larger diameter holes where counterclockwise cutting helps. Left-cutting is particularly advantageous for extracting broken or seized screws because the reverse rotation often aids removal while reducing required feed force. Which three drill types exist and where does the Twist Drill fit? Common types are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for metallic materials and machine-driven operations. Why are Twist Drills re-ground to a point angle and what does a 135° angle achieve? Re-sharpening adjusts the Cutting Edges and the Point Angle to reduce the chisel edge and lower friction. A 135° Point Angle, as used on the MetavCUT Twist Drill, shortens initial penetration time and improves centring in harder materials, allowing smoother drilling with less tendency to wander. Can the MetavCUT Twist Drill be used for wood drilling? A metal Twist Drill can be used in wood, but guidance and finish are generally inferior compared with a dedicated wood drill. The MetavCUT Twist Drill will drill wood but may give a rougher hole and less precise guidance, while being easier to re-sharpen and having a lower self-feed tendency. For which hole depths is the Twist Drill the most used tool? A full-through drilling operation is commonly executed with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill such as the MetavCUT model is the most frequently used tool in workshops and machine shops.

Twist Drill HSS‑G 9.5 mm — 135° Tip, Triangular Shank, DIN 338, Spezial Execution by MetavCUT The Twist Drill HSS‑G from MetavCUT is a precision metal‑drilling bit designed for demanding work in alloyed and unalloyed steels and other hard materials using a Drilling Machine or cordless drill. Twist Drill Rapid HSS‑G 9.5 mm 135° tip Ground geometry for up to 40% faster drilling Requires 50% less axial pressure for easier use Triangular shank for secure grip in cordless drills Conforms to DIN 338 for short HSS twist drills Faster, cleaner holes thanks to precision ground geometry The specially ground HSS‑G cutting geometry reduces cutting forces and enables drilling up to 40% faster, which translates into measurable time savings on repetitive tasks. Because the bit needs 50% less axial pressure, work with portable Drilling Machines becomes noticeably easier and less fatiguing. This technical advantage delivers both higher productivity and reduced tool wear, making the HSS‑G bit a pragmatic choice for production environments and trade workshops. Reliable centering and durable tip for hard materials A 135° tip angle supports secure entry and reduced walking when working with hard materials such as stainless steel; the blunted tip geometry also helps produce holes with grat‑free edges. The Rapid grinding and the W‑style cutting edge improve chip formation and evacuation, so each hole comes out cleaner with lower burr formation. These traits make the bit particularly suitable where precision and surface quality matter. Secure fastening and easy tool change with triangular shank The three‑flat (triangular) shank ensures positive engagement in quick‑change chucks and cordless drills, reducing slippage under load and improving torque transfer. This simple mechanical feature increases efficiency on the job and lowers the risk of damage to both the tool and the workpiece. For mobile tradespeople and maintenance teams, the shank design helps maintain steady operation even under intermittent, demanding use. Conformance to standards and recommended applications Manufactured according to DIN 338 for short HSS twist drills, this Spezial series Twist Drill is optimised for drilling in alloyed and unalloyed Steel, Cast Iron, Non‑Ferrous Metals, Aluminium, Hard Plastics and also suitable for occasional woodworking tasks. The specification and grinding method make the bit a robust option for both stationary machine tools and handheld cordless applications where dependable performance is required. Designed for craftsmen and production alike Whether used in repair shops, fabrication, or on‑site installations, this HSS‑G bit targets professionals who require repeatable precision and reduced effort. The Rapid‑style grinding and sturdy construction aim to extend tool life and minimise rework, offering a compelling combination of efficiency and reliability for industrial and trade users. We recommend the MetavCUT Rapid HSS‑G Twist Drill for professionals seeking faster, cleaner metal drilling; for expert advice on suitability and dimensions contact METAV Werkzeuge — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 55095-FDA Diameter: 9.5 mm Tip angle: 135° Material: HSS‑G Overall length: 125 mm Spiral length: 81 mm Shank execution: with multi‑bevel cutting edge and triangular shank Model series: Spezial Application: Drills for metal For drilling machine: Drilling Machine Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The Twist Drill by MetavCUT (HSS‑G, 9.5 mm) is primarily used for drilling high‑strength materials and larger diameters; it excels in alloyed and unalloyed Steel, Cast Iron, Non‑Ferrous Metals, Aluminium and Hard Plastics. The bit’s ground geometry allows faster progress while maintaining clean hole edges, making it a reliable choice for metalworking tasks. Which three drill types are commonly distinguished? Commonly, the three main drill categories are Metal Drill, Wood Drill, and Masonry/Concrete Drill; the MetavCUT Twist Drill belongs to the metal drill group and is engineered for metalworking performance.

Twist Drill — Profi Line left-cutting HSS-G 9 mm, 135° (DIN 338) by MetavCUT The Twist Drill left-cutting HSS-G 9 mm is a metal drill bit designed for use in drilling machines and hand drills for efficient extraction and precise metal drilling. Left-cutting geometry for screw extraction and tough tasks 9 mm Diameter for standard metal drilling 135° Tip angle for harder materials like stainless steel HSS-G Material for wear resistance and durability Conforms to DIN 338 for short twist drills with cylindrical shank Superior Performance in Hard Materials thanks to the 135° Tip Angle The Profi Line short twist drill features a 135° tip angle, which reduces entry forces and shortens the pilot time when penetrating harder materials. This geometry is particularly advantageous for stainless steel and other high-strength alloys because it spreads cutting load and decreases the risk of tip wandering. The result is cleaner holes and improved centring in demanding Metal applications. One direct advantage for workshops is fewer rejects and less rework when machining tougher components. Left-cutting Design: Fast Extraction and Lower Feed Force A left-cutting grind means the bit is ground to cut when the spindle turns counterclockwise; this is ideal for removing broken or seized screws and studs. The MetavCUT left-cutting twist drill is optimised for such operations and, according to the manufacturer data, can achieve up to 40% faster drilling while requiring up to 50% less axial feed force compared with conventional HSS drills. For technicians, this translates into reduced operator strain and faster job turnaround when working on repair or disassembly tasks. Material and Standard: HSS-G and DIN 338 for Reliable Use Manufactured from HSS-G, this drill offers a balance of toughness and heat resistance suited for sustained metal cutting. The product is made to DIN 338, the standard describing short twist drills with a cylindrical shank; this ensures consistent shank dimensions, compatible fitting in standard chucks, and predictable performance across production workflows. For buyers this means reliable interchangeability in tool holders and consistent hole quality in serial work. Where this Drill Excels and Who Benefits Most This twist drill is aimed at professionals and maintenance technicians who work with both alloyed and unalloyed steels, cast steels, cast iron, sintered metals, non-ferrous metals and hard plastics. Its left-cutting version is especially useful in repair shops and assembly lines where removal of broken fasteners is frequent. The Profi Line series positions the bit as a practical choice for workshops that require a robust, short drill with dependable centring and reduced push-down effort. For demanding metalwork choose the MetavCUT Profi Line Twist Drill for reliable extraction and efficient drilling — METAV Werkzeuge offers expert advice and comprehensive support, contact via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical Information Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 60090-FDA Diameter: 9 mm Tip Angle: 135° Execution: left-cutting (linksschneidend) For: Drilling Machine / Hand Drill Material: HSS-G Standard: DIN 338 Model Series: Profi Line Packaging unit: 5 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The MetavCUT Twist Drill is primarily applied to the machining of high-strength materials and larger drill diameters; it is especially suited for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non-ferrous metals and hard plastics. Its shape allows relatively simple resharpening while maintaining resistance under heavy loads. Which three drill types are there? Commonly distinguished drill types are metal drill bits, wood drill bits and masonry/concrete drill bits. The MetavCUT Twist Drill belongs to the metal drill bit group. Why are twist drills resharpened at the tip? Resharpening the tip of a twist drill reduces the cross-cut edge at the point. By regrinding the point, friction is significantly lowered and less feed force is required; at the same time the bit centres more reliably in the workpiece. Can a Twist Drill be used to drill wood? A metal twist drill such as the MetavCUT Twist Drill can be used in wood, but guidance is inferior and hole quality is usually less clean than with a dedicated wood bit. Metal bits are easier to resharpen and typically exhibit lower self-feeding tendencies. For which drilling depths is the Twist Drill most used? A through hole in solid material is typically produced with a twist drill. For diameters up to 20 mm and drilling depths up to 100 mm, the twist drill is the most commonly used tool. What is better, HSS or HSSE? The common belief that HSSE steels are always superior to standard HSS steels is not universally correct. When choosing between HSS and HSSE, evaluate whether the specific working conditions justify the higher acquisition cost of HSSE.

Twist Drill — Metal Drill HSS‑G, Ø 9 mm, 135° Point, Spezial, DIN 338, with multi‑bevel cutting edge and triangular shank, MetavCUT The Twist Drill HSS‑G metal drill is designed for fast, precise holes in steel and other hard materials, suitable for hand and stationary drilling machines. Fast drilling: up to 40% quicker than standard HSS Requires 50% less feed force 135° point for harder materials 3‑flat shank for secure grip in cordless drills Conforms to DIN 338 for short twist drills Faster metalworking with less effort This HSS‑G tool delivers a measurable productivity gain thanks to a specially ground geometry that enables up to 40% faster drilling while needing 50% less feed force than conventional HSS drills. The result is reduced operator fatigue and higher throughput in repetitive tasks. For workshops and industrial users who value cycle time, the shortened drilling time translates directly into improved efficiency and lower labour costs per hole without compromising hole quality. Cleaner entry and reliable centring in hard materials The 135° point is optimised for harder workpiece materials such as stainless steel and tempered alloys; it reduces wandering at the start of the hole and shortens the required plunge distance. By decreasing the chisel edge width, the point geometry lowers friction and cutting forces, which helps produce burr‑reduced, clean hole edges. For users unfamiliar with tip angles: a larger point angle typically penetrates harder materials more easily and provides better centring. Secure clamping and compatibility for hand tools The design with a triangular shank (3‑flat shank) ensures slip‑free engagement in chucks of cordless and hand drills, improving torque transfer and reducing slippage during exertion. Conformance to DIN 338 classifies this as a short twist drill with a cylindrical shank made of high‑speed steel, so it fits standard toolholders and is suitable for both mobile and stationary applications. METAV Werkzeuge offers expert consultation if there are questions about drill retention or machine compatibility. Tailored for demanding applications and varied materials Manufactured from HSS‑G, this Rapid‑type drill is suitable for a broad spectrum of materials including alloyed and unalloyed steels, cast and temper‑cast steels, non‑ferrous metals, hard plastics and also for occasional use in wood. Its geometry focuses on reliable performance in metalworking environments; the short configuration is particularly advantageous where rigidity and minimal runout are required. For precision shops, maintenance teams or professionals, this tool combines robustness with straightforward resharpening. Strong recommendation: For professionals seeking faster, cleaner holes in tough materials, choose the MetavCUT HSS‑G Twist Drill — METAV Werkzeuge provides comprehensive technical advice and support via email, phone and WhatsApp: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 55090-FDA Diameter: 9 mm Point angle: 135° Spiral length: 81 mm Total length: 125 mm Shaft execution: with multi‑bevel cutting edge and triangular shank Model series: Spezial Material: HSS‑G Standard: DIN 338 Application: Drill for metal Suitable for: Drilling Machine (hand drill) Packaging unit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The MetavCUT Twist Drill is primarily applied to the machining of high‑strength materials and larger bore diameters; its shape is easy to regrind and it withstands greater loads, making it ideal for demanding metalworking operations. Which three drill types exist? Common drill types are metal drills, wood drills and stone/concrete drills, and the MetavCUT Twist Drill belongs to the metal drill category tailored for metal machining. Why are Twist Drills pointed? Pointing reduces the chisel edge at the tip of the Twist Drill, which significantly lowers friction and therefore requires less feed force; at the same time the point improves centring of the drill in the workpiece. Can a Twist Drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance is inferior and the finish is less clean; however these drills are easier to resharpen and show less self‑feed. At which drilling depths is the Twist Drill most used? A full‑bore hole is often executed with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm the Twist Drill is the most commonly used tool. What is better, HSS or HSSE? The general belief that HSSE steels are inherently superior to normal HSS is incorrect; when choosing between HSS and HSSE for a MetavCUT Twist Drill, assess working conditions carefully to determine whether the higher purchase cost of HSSE is justified.