Precision angle gauges for reliable right-angle control
Angle gauges and inspection squares provide dependable verification of right-angle geometry and ensure accurate alignment in metalworking assemblies. Used for tasks ranging from rough marking with a machinist's square to high-precision verification with hardened and lapped control angles, these tools prevent fitment errors and functional faults by detecting even minute deviations from 90° and other set angles. For heavy-duty applications such as flange alignment in piping and vessel fabrication, robust flange squares offer stable seating on curved surfaces, while sine bars and adjustable angle gauges enable trigonometrically exact measurements for non‑standard angles. Regular calibration and inspection of leg flatness and wear are essential to maintain measurement integrity.
100x70 mm Locksmith Square With Stop, Zinc Plated, Special Steel Werksnorm - Metav IndustryLine
Take advantage of the combination of galvanised special steel, compact 100×70 mm geometry and an integrated stop for fast, repeatable layout and marking; order directly via Metav Werkzeuge or consult our specialists for tailored advice. M214.523 machinist's square 100×70 mm – galvanised special steel with integrated stop (Metav IndustryLine) The M214.523 machinist's square is a compact angle gauge for precise alignment and repeatable marking in workshop and maintenance environments, featuring a galvanised body and a fixed stop for consistent positioning Galvanised special steel construction Compact 100×70 mm format Integrated stop for repeatable marking Factory-standard finish for consistent edges Precision and durability for everyday workshop checks The compact leg geometry and galvanised finish combine to deliver a small but robust measuring aid that resists corrosion and keeps straight edges true under regular use. Built from special steel, the square gives a stable reference for scribing and checking right angles while its modest mass supports safe, controllable handling. The design prioritises consistent contact surfaces so that each check produces reliable comparative results rather than variable readings. Repeatable positioning that speeds up layout work An integrated stop turns manual layout into a repeatable process: the stop establishes a fixed datum for successive marks and reduces the need for clamping or temporary fixtures. This feature shortens setup time and improves throughput during series marking, aligning directly with efficiency goals on production benches and in maintenance tasks. The straightforward geometry means the tool functions as a dependable analogue reference wherever mechanical alignment is required. Workshop-ready handling and consistent workmanship With a lightweight build and a factory-standard finish, the square is easy to manoeuvre and to stow in a tool tray or rack. The combination of compact size and robust construction supports both handheld checks and use as a quick bench-mounted guide. Metav IndustryLine’s positioning as a precision partner emphasises accessible quality: the square is a pragmatic choice for workshops seeking dependable, low-hassle measuring tools that integrate into everyday workflows. Contact Metav Werkzeuge today to discuss the M214.523 machinist's square for reliable angle checks and practical layout solutions, delivered from Emmerich with expert advice and supply security. Technical data Article number: M214.523 GTIN: 4054469109015 SKU: M214.523 Facts Dimensions: 100×70 mm Weight: 0.2 kg Customs tariff number: 90178090 Special features Material: Special steel, galvanised Feature: with stop (integrated datum) Standard: Werksnorm FAQ What applications suit this square best? The M214.523 machinist's square (Metav IndustryLine) is intended for alignment, scribing and repeatable marking in workshop and maintenance environments where a compact, robust angle reference is required. Is the surface protected against corrosion? Yes; the square is made from special steel with a galvanised finish, which provides improved resistance to rust compared with untreated steel. How does the integrated stop improve workflow? The stop establishes a fixed datum so successive markings and components can be positioned identically, reducing setup time and increasing repeatability when using the M214.523 angle gauge. What does the factory standard 'Werksnorm' imply? Werksnorm indicates consistent in-house manufacturing tolerances and finishing; for the M214.523 this means straight edges and the stop are produced to the same internal quality criteria across units. Can this square be used for bench-mounted checks? Yes; its compact geometry and lightweight construction make it suitable for both handheld checks and quick bench-mounted alignment tasks as a repeatable reference. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x70 mm Precision Bevel Square With Stop, Hardened Measuring Edge, Stainless Steel, DIN 875/00 - Metav IndustryLine
Take advantage of the combination of DIN 875 Class 00 accuracy, a stainless steel, matt‑chrome finish with hardened measuring edge, and an integrated stop for fast, repeatable angle checks; order the Hairline Square directly via Metav Werkzeuge or consult our specialists for application advice. Hairline Square M214.104 (100 × 70 mm) – DIN 875 Class 00, stainless The Hairline Square M214.104 is a precision angle gauge with an integrated hairline and stop, engineered for fine layout and inspection work in toolrooms and production environments. DIN 875 Class 00 precision Stainless steel with hardened measuring edge Integrated hairline and stop Compact 100 × 70 mm format Precise alignment and repeatable inspection Built to DIN 875 Class 00, this angle gauge delivers the fine tolerances expected in precision inspection. The slender hairline provides an unambiguous reference for scribing and visual alignment, reducing set‑up time and rework. The hardened edge maintains a stable reference over repeated use, so measurements remain consistent and comparable across production runs — a clear efficiency gain for quality control processes. Durable construction for everyday workshop use The body is manufactured from stainless steel, matt‑chrome plated for reduced glare and improved handling, while the hardened measuring edge resists wear under frequent contact. An integrated stop facilitates quick positioning against parts and fixtures, ensuring reproducible seating without additional clamps. The compact 100 × 70 mm format keeps the gauge manoeuvrable at benches and in tight jigs, combining robustness with ergonomic convenience for daily tasks. Practical applications and handling guidance Suitable for layout, inspection and final checks in machine shops, toolmaking and service departments, the gauge supports precise right‑angle checks and edge alignment. Delivered in a protective transport box to avoid damage in transit, the instrument is ready for immediate use in the workshop. For complex setups or series inspections, Metav Werkzeuge’s product information helps match the square to specific workflow needs and fixture types. For reliable Class 00 angle verification and workshop‑grade durability, request the Hairline Square M214.104 from Metav Werkzeuge in Emmerich — technical advice and ordering available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.104 GTIN: 4054469106625 Norm: DIN 875/00 ECLASS: 21170127 Numbers / Core technical data Dimensions: 100 × 70 mm Customs tariff number: 90178090 Special features Material: stainless steel, matt‑chrome plated, hardened measuring edge Integrated hairline reference With stop for repeatable positioning Delivered in a protective transport box FAQ What tolerance class does the square conform to? The instrument conforms to DIN 875 Class 00, providing high‑precision angle control suitable for fine inspection tasks. What materials and surface treatment are used? The square is made from stainless steel with a matt‑chrome finish and a hardened measuring edge to reduce wear and preserve accuracy. Is the hairline suitable for scribing and optical alignment? Yes, the built‑in hairline gives a clear visual datum for scribing and edge alignment, improving speed and repeatability in layout work. How is the square delivered to protect accuracy in transit? Delivery includes a protective transport box to prevent impact and abrasion during shipment. Which workshop tasks benefit most from this square? Typical uses include toolroom layout, machine‑shop inspection and fixture set‑up where reliable right‑angle reference and quick positioning are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x70 mm Stop Square Hardened Stainless Steel, DIN 875/2, With Stop - Metav IndustryLine
Take advantage of the combination of hardened stainless steel construction, DIN 875/2 accuracy and an integrated stop for consistent alignment and durable performance on the shop floor. Order the reference angle directly via Metav Werkzeuge or contact our advisors for application guidance and delivery options. Reference angle 100 × 70 mm — precision square to DIN 875/2 (Metav IndustryLine) The Reference angle 100 × 70 mm is a hardened stainless steel precision square designed for workshop layout, machine set‑up and repeatable positioning; supplied with an integral stop to simplify fixture alignment and small-part inspection. Hardened stainless steel construction for longevity Meets DIN 875/2 accuracy class Compact 100 × 70 mm footprint for tight setups Supplied with integrated stop for repeatable positioning Precise alignment that reduces setup time This precision square provides a reliable datum for routine squaring and assembly tasks. The DIN 875/2 classification gives a clear, measurable tolerance that supports consistent results when aligning components or checking squareness on jigs and fixtures. The hardened stainless steel body resists abrasion and surface wear, so reference faces remain true longer than untreated alternatives. As a result, calibration intervals are extended and process stability improves, which is a practical advantage in production and quality control environments. Compact design with practical workshop benefits With a 100 × 70 mm footprint and an integrated stop, the instrument combines reach and accessibility in restricted spaces. The small size makes it easy to position against plates, small housings or machine tables while the stop provides a defined contact for repetitive operations. The compact reference fits neatly into inspection kits or tool trolleys, offering a balance of rigidity and manoeuvrability that supports efficient one‑person handling during setup and short series production. Durable, corrosion‑resistant solution for everyday use Manufactured from hardened stainless steel, the square stands up to the humid or variable conditions often found in busy workshops. Corrosion resistance preserves the contact geometry so measurements remain reproducible even after extended use. The presence of an integrated stop reduces handling variance, which together with the standardised tolerance class helps minimise rework and downtime. For traceability and stock keeping, the item is listed as M214.374 under the Metav IndustryLine range. For workshop-ready precision and dependable alignment, request the Metav IndustryLine reference angle through Metav Werkzeuge — contact our Emmerich team for advice on delivery and suitable inspection workflows. Technical data Article number: M214.374 GTIN: 4054469108506 Standard: DIN 875/2 Dimensions: 100 × 70 mm eClass: 21170119 Tariff number: 90178090 Facts Compact footprint 100 × 70 mm Material: stainless steel, hardened Integral stop for repeatable positioning Category: Angle (Winkel) SKU: M214.374 Special features Supplied with stop Corrosion‑resistant finish Metav IndustryLine product Intended for workshop and inspection use FAQ What tolerance does this reference angle meet? The reference angle meets DIN 875/2 tolerance class; this classification ensures repeatable squaring suitable for workshop and quality‑control tasks. Is the square suitable for humid or corrosive workshop environments? Yes. The item is made from hardened stainless steel, which gives corrosion resistance and preserves the reference faces during everyday use. Can the reference angle be used for fixture alignment and machine setup? Yes. The integrated stop and compact 100 × 70 mm design make it well suited for fixture alignment, machine set‑up and repeatable positioning in constrained assemblies. What is the Metav IndustryLine identification for this product? The product is listed under Metav IndustryLine with SKU M214.374 and GTIN 4054469108506, for easy ordering and stock handling. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x70mm 135° Mitre Square With Stop, Carbon Steel, DIN 875/2 - Metav IndustryLine
Take advantage of the combination of accurate 135° geometry, a compact 100 x 70 mm format and an integral stop to ensure repeatable layout and inspection results; order the tool directly via Metav Werkzeuge or consult our advisors for application advice. Mitre Angle 135° – 100 x 70 mm steel mitre square with stop (Metav IndustryLine) A Mitre Angle 135° designed as a compact steel mitre square for precise marking, inspection and repeatable position setting in metalworking and general workshop use. Fixed 135° angle for accurate mitre checks Compact 100 x 70 mm format for bench work Steel construction to DIN 875/2 Integral stop for repeatable positioning Consistent results for layout and inspection The compact construction delivers a stable reference that supports accurate marking and verification of 135° joints. Manufactured in mild steel to the specification DIN 875/2, this mitre device provides a reliable right‑angle analogue for mitre applications while remaining small enough for everyday bench use. The clearly defined geometry reduces readjustment time and simplifies visual inspection, improving throughput in repetitive tasks. Repeatability through an integrated stop An integral stop allows fast, repeatable positioning when marking multiple workpieces or checking a series of components. The stop ensures that the same datum is reproduced quickly without secondary fixtures, which translates into fewer handling errors and a steadier workflow. For workshops where speed and consistency matter, the combination of fixed geometry and stop yields measurable gains in process stability. Built to a workshop standard Conformity with DIN 875/2 means the tool meets established workshop tolerances for angle squares, making it suited to general machine‑shop and fabrication checks. The robust steel construction resists everyday knocks and maintains edge geometry during routine use, so layout and inspection remain dependable without frequent recalibration. The compact footprint also facilitates safe storage and rapid retrieval between tasks. Practical handling and care The modest dimensions and solid construction make the instrument straightforward to handle on bench layouts and in fixture checks. Clean the faces after use and avoid corrosive storage conditions to preserve the working surfaces. Where repeatability is required, the stop should be checked for alignment before long runs; its design supports quick verification without additional equipment. For reliable 135° layout and repeatable set‑ups choose the Metav IndustryLine Mitre Angle (M214.404) — contact Metav Werkzeuge for expert advice or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.404 GTIN: 4054469108575 Brand: Metav IndustryLine Standard: DIN 875/2 Dimensions and numeric data Angle: 135° Size: 100 x 70 mm Tariff code: 90178090 eClass: 21170138 Special features and materials Material: mild steel (Normalstahl) Feature: with stop (mit Anschlag) Category: angle / mitre square Application: marking and inspection of mitres FAQ What is the primary use of this mitre device? The Mitre Angle 135° is intended for precise marking and inspection of 135° mitres in workshop settings; the integral stop supports repeatable positioning for series work. Is the construction suitable for everyday workshop use? Yes, the Metav IndustryLine mitre square uses mild steel and is made to DIN 875/2, offering robust performance for routine metalworking and fabrication checks. How does the stop improve workflow? The integral stop enables quick, repeatable placement of components so successive markings or checks maintain the same datum without additional clamps or jigs. Can the mitre square be used in both metalworking and woodworking? The tool is designed for general workshop layout and inspection; the steel construction is particularly suited to metalworking but can also be used for woodworking marking tasks where a durable metal reference is required. What identification details should be quoted when ordering? Please refer to the article number M214.404 and the Metav IndustryLine brand when enquiring to ensure the correct 135° mitre square is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x70mm 45° Bevel Square With Stop, Hardened Steel, DIN 875/2 - Metav IndustryLine
Take advantage of the combination of precise 45° geometry, a compact 100 x 70 mm format and an integrated stop for repeatable setups; order the 45° bevel square (SKU M214.434) directly via Metav Werkzeuge or ask our consultants if needed. 45° bevel square M214.434 — Precision angle square, 100 x 70 mm, Metav IndustryLine The 45° bevel square is a compact, workshop-ready gauge designed for checking and setting 45° angles in fabrication, assembly and inspection tasks across metalworking and general mechanical workshops. Precision 45° angle to DIN 875/2 Dimensions 100 x 70 mm Integrated stop for repeatable positioning Robust standard-steel design Accurate 45° alignment that speeds up set-up and inspection The tool delivers a repeatable 45° datum that reduces alignment time at the bench and on the machine. Manufactured to DIN 875/2, the geometry complies with a recognised tolerance class so that angle checks and jigs can be trusted as part of quality routines. With the combination of defined angle faces and a compact footprint, the square minimises the need for iterative adjustments, improving throughput when multiple components require the same angle reference. The emphasis on measurable accuracy supports efficient process control and quick decision-making on the shop floor. Built to withstand everyday workshop conditions A straightforward construction in standard steel provides the balance between rigidity and handling expected in routine metalworking. The compact 100 x 70 mm size keeps the gauge stiff and easy to position, while the integrated stop enables consistent placement against workpieces or fixtures, supporting reproducible results across repeated operations. The design foregoes unnecessary complexity, so wear parts are minimal and maintenance is uncomplicated, which in practice translates into steady availability for production tasks and less downtime. Practical handling for precision tasks and fixtures The square’s form factor and the stop feature make it suitable for use in assembly, layout and inspection processes where a clear 45° reference is required. The faces are suited to quick visual checks as well as setting up small jigs and clamping arrangements; the tool therefore functions as both a checking instrument and a basic setting gauge. Confidence in repeatability fosters better traceability in routine checks and simpler integration into existing workplace procedures, helping quality teams to standardise angle verification without elaborate equipment. For robust angle control on the shop floor, choose the Metav IndustryLine 45° bevel square (M214.434) and contact Metav Werkzeuge in Emmerich for delivery details and application advice. Technical data Article number: M214.434 SKU: M214.434 GTIN: 4054469108742 Category: Angle Facts Angle: 45° Dimensions: 100 x 70 mm Customs tariff number: 90178090 ECLASS: 21170119 Special features Integrated stop for repeatable positioning Material: standard steel Standard: DIN 875/2 Label: Spitzwinkel 45°, 100x70mm, mit Anschlag FAQ What tolerance class does the square meet? The square is manufactured to DIN 875/2, which defines the geometric tolerance class for angle measuring gauges and supports reliable shop-floor verification. Can the integrated stop be used for repeated positioning? Yes, the integrated stop on the M214.434 provides repeatable positioning for multiple components, reducing setup variation during batch work. Is the square suitable for workshop and light fabrication use? The compact 100 x 70 mm format and robust standard-steel construction make the square well suited to workshop tasks such as layout, fixture setting and routine inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x70mm 45° Precision Bevel Square Flat, DIN 875/2 - Metav IndustryLine
Take advantage of precise 45° reference geometry and a compact, flat form for straightforward set-up and quality checks in the workshop; order through Metav Werkzeuge or consult the sales team for application advice. M214.424 — 45° acute-angle square, 100 x 70 mm, Metav IndustryLine The M214.424 45° acute-angle square is a compact, flat precision gauge intended for angle checks and layout tasks in metalworking, toolmaking and inspection routines. Precision 45° geometry per DIN 875/2 Compact 100 x 70 mm flat design Mild steel construction No stop for flexible positioning Ensure accurate 45° references for machining and inspection A reliable angle reference reduces setup time and scrap. The tool provides a 45° datum in accordance with DIN 875/2, making it suitable for fast verification of mitre cuts, jig alignment and component squareness. The calibrated geometry guarantees precision when checking fixtures or verifying tool offsets, so deviations are detected early and machining cycles are kept efficient. Robust, compact form that suits workshop handling The slim, flat configuration and 100 x 70 mm footprint allow quick placement on small parts and in confined fixturing. Constructed from mild steel, the gauge balances durability with manageable mass for routine use; its surface resists routine shop handling while remaining easy to clamp or hold during layout work. The absence of a fixed stop enables flexible positioning, which simplifies checks on irregular assemblies or when combined with other layout tools. Practical use cases that save time and reduce rework Ideal for inspection benches, assembly stations and toolmaking setups, this angle gauge supports visual and tactile checks as well as reference comparisons against master parts. The compact geometry is particularly useful when checking mitre angles, aligning components for welding or setting up cutters. Using a defined angle standard shortens inspection loops and contributes to measurable reductions in production rejects while improving repeatability across batches. For tailored advice on integrating the Metav IndustryLine 45° acute-angle square into existing workflows, contact Metav Werkzeuge in Emmerich or request detailed technical guidance from the sales team at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.424 GTIN: 4054469108681 ECLASS: 21170119 Tariff number: 90178090 Facts Dimensions: 100 x 70 mm Standard: DIN 875/2 Material: Mild steel Special features Flat design No stop for flexible positioning Category: Angle gauge / square Intended use: Angle inspection and layout FAQ What standard does this angle gauge conform to? The M214.424 acute-angle square conforms to DIN 875/2, providing a verified 45° reference suitable for workshop inspection and setup tasks. Is the gauge suitable for heavy workshop use? Yes, the Metav IndustryLine acute-angle square is made from mild steel and designed for regular shop handling and layout operations. Does the tool include a fixed stop for clamping? No, this model is supplied without a stop, allowing flexible positioning for a range of part geometries and assembly checks. What typical applications suit this 45° square? Common uses include mitre verification, fixture alignment, welding set-up and toolmaking layout; the compact size is particularly useful for small assemblies and inspection benches. How to ensure consistent results when using the gauge? Use consistent seating and clamping on the workpiece, clean mating surfaces and reference the DIN 875/2 geometry during routine checks to maintain repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100° Sine Bar With Table And Support Cylinders, Hardened Steel, 0.58 kg Kbox Included - Metav IndustryLine
Combining a 0–60° measurement range, fully hardened steel construction and reliable parallelism, this sine bar ensures reproducible angle setting for workshop and toolroom tasks; order directly via Metav Werkzeuge or contact our consultants for application advice. Sine bar 100 mm (M318.211) — fully hardened steel, 0–60° range, Metav IndustryLine Sine bar 100 mm (M318.211) for precise angle setting in machining and inspection applications, designed for robust workshop use and repeatable alignment tasks Fully hardened steel construction Measurement range 0–60° Includes table and support cylinders Compact footprint 24 x 32 Reliable angular set-up for everyday production The sine bar delivers a straightforward, physics-based method for setting and checking angles with a 0–60° range, translating trigonometric accuracy into a practical workshop routine. With fully hardened steel construction, the device resists wear and preserves datum integrity over repeated use, which reduces set-up variation and downtime. The tool’s parallelism specification supports consistent contact between datum surfaces and measuring faces, improving reproducibility when aligning fixtures, checking machinist setups or verifying component angles. This section explains how the basic sine principle produces highly accurate tilt values from a controlled support spacing. Designed for robust handling and straightforward integration A compact profile (24 x 32) and a defined support spacing of 100 mm enable comfortable placement on worktables and in inspection fixtures while keeping the bar rigid under standard clamping forces. The inclusion of a practical table and support cylinders simplifies the establishment of the base geometry: cylinders are used to set the rise while the table offers a stable reference. These features make the tool suitable for series set-ups in toolrooms and medium‑duty production environments, where a balance of stiffness, handling and repeatability is required. The construction focuses on longevity and a maintenance‑friendly design. Practical workflow: from set-up to verification Using the sine principle, a known rise on the support cylinders creates a reproducible angle that can be transferred to workpieces or used to verify machine settings; the supplied table and cylinders speed this sequence and reduce auxiliary set‑up time. Traceability is supported through clear, mechanical references rather than electronic adjustments, which is beneficial in environments that prefer straightforward, inspectable methods. For users needing rapid verification, the bar’s geometric stability and hardened surfaces give consistent contact conditions, lowering measurement uncertainty and ensuring trustworthy alignment for subsequent machining or inspection operations. For professional angle setting and workshop integration, request application advice or order the Metav IndustryLine sine bar through Metav Werkzeuge — our specialists can explain how the M318.211 fits specific set‑ups and tooling chains. Technical Data Article number: M318.211 GTIN: 4054469128139 ECLASS: 21170140 Label: Sinuslineal 100 mm 0,58 kg Facts Measuring range: 0–60° Support spacing: 100 Parallelism: 2.5 Accuracy: 2 Footprint: 24x32 Special features Material: fully hardened steel Includes table and support cylinders Tariff number: 90173000 Brand: Metav IndustryLine FAQ What is the measuring range of the sine bar? The sine bar provides a measuring range of 0–60°, allowing precise angle setting across a broad span for machining and inspection tasks. Are support cylinders included? Yes, the delivery includes support cylinders and a table to set the rise reliably for angle generation with the sine bar (M318.211). What material and finish does the instrument have? The unit is made from fully hardened steel, which preserves datum faces and maintains consistent contact conditions over long service life. Which applications suit this sine bar best? The device is intended for workshop and toolroom use: angular set‑up, fixture alignment and quick verification tasks where mechanical, repeatable references are preferred. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100×70 mm Angle Stop With Stop, DIN 875/1, Carbon Steel - Metav IndustryLine
Combine DIN 875/1 accuracy with a compact 100 x 70 mm format and robust mild steel construction for dependable squaring and repeatable stops; order the angle stop directly via Metav Werkzeuge or ask our consultants if needed. Angle stop M214.354 — 100 x 70 mm, DIN 875/1 Angle stop M214.354 designed for precision positioning and repeatable right‑angle references in general workshop and machine‑tool setups Compact 100 x 70 mm working face Manufactured to DIN 875/1 tolerance Mild steel construction for durability Integral stop for repeatable positioning Precision where it counts The DIN 875/1 specification guarantees a defined tolerance for squareness, so the tool provides a reliable right‑angle reference for layout and setup tasks. With a 100 x 70 mm working face the device offers a balance between reach and rigidity, making it suitable for fixture alignment, verification of square edges and repetitive positioning tasks. The clearly defined tolerance simplifies inspection procedures and reduces uncertainty during assembly and machining operations. Built to withstand daily use Constructed from mild steel, the squaring aid is robust enough for workshop environments while remaining easy to handle. The integrated stop permits quick, repeatable positioning of workpieces without additional clamping, reducing setup time and minimising handling errors. The compact format is convenient for bench work and fits common vice setups, offering a durable alternative to lightweight inspection squares where a sturdy contact surface is required. Practical benefits for production and inspection A consistent, mechanically simple design delivers tangible productivity gains: fewer alignment retries, faster setup cycles and improved repeatability across batches. The instrument's geometry supports both routine inspection and repetitive fixture work, helping to cut rework and scrap. As a standardised component, it integrates seamlessly into quality procedures and works well alongside other workshop gauges and inspection tools produced under the Metav IndustryLine range. Contact Metav Werkzeuge in Emmerich for technical advice or to place an order — Tel +49 2822 7131930, eMail info@metav-werkzeuge.com Technical data Article number: M214.354 GTIN: 4054469108346 Material: mild steel Standard: DIN 875/1 Tariff number: 90178090 Measurements Working faces: 100 x 70 mm Special features With integral stop Conforms to DIN 875/1 Category: Winkel (angle) Eclass: 21170119 FAQ What accuracy can be expected from this angle stop? The angle stop M214.354 is manufactured to DIN 875/1, which defines the tolerance class for squareness; this ensures consistent right‑angle references suitable for workshop inspection and setup. Which materials is the tool made from and how durable is it? The device is made from mild steel, providing robust mechanical resistance for daily use in machine shops and assembly environments while maintaining stable contact surfaces. Can the angle stop be used for repetitive positioning tasks? Yes, the integral stop on the M214.354 enables repeatable positioning of components, reducing setup time and improving process repeatability in production runs. Is this tool compatible with standard vices and fixtures? The compact 100 x 70 mm format of the angle stop fits common vice jaws and fixture arrangements, making it practical for bench work and small‑ to medium‑sized assemblies. How is the product identified for ordering or inventory? The angle stop is listed under SKU M214.354 and GTIN 4054469108346 for straightforward ordering and stock management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
120x80mm 45° Bevel Angle Square Flat Normal Steel No Stop, DIN 875/2 - Metav IndustryLine
Take advantage of DIN 875/2 conformity, a flat, high‑stiffness normal steel profile and a compact 120×80 mm layout for reliable right‑angle checks and fast workshop inspections. Order the (45° precision square) directly via (Metav Werkzeuge) or ask our consultants if needed. 45° Precision Square M214.425 — 120×80 mm, DIN 875/2 (Metav IndustryLine) A 45° precision square intended for quick squareness checks, layout and inspection tasks in metalworking and machine shops DIN 875/2 manufacturing tolerance Compact 120×80 mm working faces Flat profile for stable seating Normal steel construction with high stiffness Accuracy and standards for routine inspection Manufactured to DIN 875/2, this angle gauge provides a measurable baseline for squareness checks and layout work. The component’s 45° geometry is produced with controlled tolerances so that results are comparable across inspection cycles; this supports quality control routines and reduces rework. The use of normal steel ensures dimensional stability under typical workshop conditions while keeping production costs moderate — a practical balance between precision and economy. Stable seating and quick repeatable checks The flat working faces and compact 120×80 mm footprint make the gauge easy to position on workpieces and inspection plates, allowing fast verification of edges, stops and fixture faces. The solid profile minimises twist and gives consistent contact during measurement, which translates into more repeatable checks and fewer measurement errors. In practice, the tool is suited to rapid in‑process inspection where clear, unambiguous results are required to maintain production flow. Workshop usability and integration into inspection routines This compact angle is supplied without an angle stop, which makes it flexible for layout tasks and for checking small components where a fixed stop would be obstructive. The robust normal‑steel construction tolerates everyday handling while providing a tactile feel favoured by technicians for alignment tasks. As a DIN‑rated precision gauge from Metav IndustryLine, it integrates well into a measured quality system and supports documentation practices that favour traceability and consistent workmanship. For reliable, DIN‑rated squareness checks choose the Metav IndustryLine 45° precision square — contact Metav Werkzeuge for delivery details and expert advice from Emmerich. Technical Data SKU: M214.425 GTIN: 4054469108698 ECLASS: 21170119 Customs tariff code: 90178090 Facts Dimensions: 120×80 mm Standard: DIN 875/2 Special features Material: Normal steel Shape: Flat working faces Supplied without angle stop Category: Measuring angles / inspection tools FAQ What accuracy standard does this angle adhere to? The 45° precision square is manufactured to DIN 875/2, providing standardised tolerances suitable for workshop inspection and layout. Can the gauge be used for fixture alignment on machine beds? Yes; the flat faces and stiff normal‑steel construction make the tool suitable for quick checks of fixture faces and alignment tasks in machine shops. Is the product supplied with an angle stop or protective case? The item is supplied without an angle stop; there is no indication of a transport case included in the product data. Who produces this precision square and how can it be sourced? This angle is offered under Metav IndustryLine and listed with SKU M214.425; procurement and delivery are handled via Metav Werkzeuge from Emmerich. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
120x80mm 45° Precision Bevel Square With Stop, Carbon Steel, DIN 875/2 - Metav IndustryLine
Take advantage of DIN 875/2 accuracy, a compact 120×80 mm footprint and a built‑in stop for fast, repeatable set‑ups; order the tool via Metav Werkzeuge or consult the Metav team for application advice. Metav IndustryLine M214.435 — 45° precision mitre square, 120×80 mm The Metav IndustryLine M214.435 is a compact 45° precision mitre square designed for workshop layout, alignment and repeatable fixturing tasks. DIN 875/2 accuracy class Compact 120×80 mm footprint Robust carbon steel construction Integrated stop for repeatable setups Accurate alignment without compromise The 45° angle gauge is manufactured to DIN 875/2, delivering a reliable level of workshop precision that shortens set‑up time and reduces rejection rates. The compact 120×80 mm size provides a stable reference while staying easy to handle at the bench; this combination of accuracy and small footprint is particularly effective when aligning mitre joints, marking components or verifying jig geometry. The clearly defined angle and verified standard reduce uncertainty during inspection and layout tasks. Built for everyday workshop durability Constructed from carbon steel, the square balances stiffness and manageable weight (approx. 0.25 kg), making it robust enough for daily use without cumbersome bulk. The integrated stop enables repeatable positioning for series work, so operators can maintain consistent results across multiple parts. The simple, low‑maintenance design means fewer consumables and less downtime, contributing to higher throughput and predictable production cycles. Practical handling that speeds workflows A deliberately compact form and the plain‑steel surface allow quick clamping or reference against fixtures and workpieces, improving ergonomics and traceability in assembly and inspection routines. The instrument’s finish and geometry support rapid visual alignment and tactile feedback during use, which enhances operator confidence and reduces rework. Certification to a recognised standard ensures acceptance in procurement and quality control processes, supporting efficient process documentation and audit trails. For robust 45° alignment and repeatable set‑ups, contact Metav Werkzeuge to request the Metav IndustryLine M214.435 precision mitre square with integrated stop and DIN 875/2 conformity Technical data Article number: M214.435 Brand: Metav IndustryLine GTIN: 4054469108759 Facts Dimensions: 120×80 mm Weight: 0.25 kg Tariff code: 90178090 eCl@ss: 21170119 Special features Material: carbon steel (Normalstahl) Standard: DIN 875/2 Feature: with stop Category: angle gauge FAQ What is the primary use for this 45° mitre square? The Metav IndustryLine M214.435 precision mitre square is intended for layout, alignment and inspection tasks where a stable 45° reference is required, such as setting up fixtures or checking mitre joints. How precise is the angle on this tool? The instrument is manufactured to DIN 875/2, which provides a trusted workshop accuracy suitable for general machine‑building and metalworking applications. What material is the square made from and how should it be maintained? Manufactured from carbon steel (Normalstahl), the square should be kept dry and lightly oiled when stored to prevent surface corrosion; routine cleaning after use preserves accuracy. Does the integrated stop improve repeatability? Yes, the integrated stop is designed for repeatable positioning, enabling consistent set‑ups across series production and reducing adjustment time. Is this tool suitable for transfer from inspection to production use? The DIN 875/2 conformity and stable geometry of the Metav IndustryLine M214.435 make it suitable for both inspection and workshop use, bridging quality control and production needs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
120x80mm Miter Square 135° With Stop, Plain Steel, DIN 875/2 - Metav IndustryLine
Take advantage of the combination of DIN 875/2 conformity, a compact 120 × 80 mm format and a sturdy mild steel construction for repeatable miter checks and consistent workshop setup; order the tool directly via Metav Werkzeuge or request expert advice from our consultants. 135° miter square M214.405 – 120 × 80 mm, mild steel, Metav IndustryLine The 135° miter square M214.405 is a compact measuring square designed for precise angle verification and repeatable workpiece referencing in metalworking and toolrooms. 135° measurement angle for mitre checks 120 × 80 mm blade and stock dimensions Complies with DIN 875/2 accuracy Robust mild steel with locating stop Accurate angle verification for reliable setups The M214.405 is engineered to provide repeatable 135° checks, making it suitable for mitring, fixture setup and quality control tasks where consistency matters. The instrument’s compliance with DIN 875/2 guarantees a recognised tolerance class for angle squares, so assessments of squareness and mitre angles are comparable across tools and shops. A defined reference face and precise blade geometry reduce alignment ambiguity, resulting in faster, more certain set-up procedures and fewer reworks. Designed for repeatability and workflow efficiency A locating stop is integrated into the square to secure a definite datum during repetitive operations, which shortens cycle times on benches and assembly jigs. The compact 120 × 80 mm footprint balances reach and rigidity: it is long enough to span common features yet short enough to avoid torsional deflection during hand-held checks. The mild steel construction delivers a robust feel and resistance to shop knocks; when combined with regular inspection against a master gauge, the unit supports a stable measurement routine that improves throughput and reduces scrap. Practical workshop qualities and maintenance The simple geometry and solid material make the tool straightforward to clean and maintain; light corrosion protection and careful storage preserve accuracy. The square’s weight and form factor support quick alignment on workpieces and gauges, enabling efficient use within standard machine-shop workflows. For traceable control loops, the square can be integrated into standard calibration schedules in line with company quality procedures, ensuring long-term confidence in angle measurements. For procurement assistance or technical clarification on the Metav IndustryLine 135° miter square, contact Metav Werkzeuge GmbH in Emmerich — our consultants will advise on suitability for specific applications via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.405 GTIN: 4054469108582 SKU: M214.405 eClass: 21170138 Quantitative data Dimensions: 120 × 80 mm Measurement angle: 135° Weight: 0.3 kg Tariff number: 90178090 Materials and features Material: mild steel Standard: DIN 875/2 Feature: with locating stop Category: measuring square (miter square) FAQ What is the intended use of this miter square? The 135° miter square M214.405 is intended for angle verification, fixture alignment and repeatable positioning tasks in metalworking and workshop inspection routines. Does the tool meet a recognised standard for accuracy? Yes, the instrument complies with DIN 875/2, which defines the tolerance class and ensures consistent accuracy for angle squares used in industrial settings. What material is the square made from and how durable is it? The M214.405 is manufactured from mild steel, providing robust mechanical durability for everyday workshop use while requiring standard care to prevent surface corrosion. Can this square be used for production fixture setup? The locating stop and compact 120 × 80 mm format make the tool well suited for fixture setup and repeated checks where a fixed datum and repeatability are important. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Multiple-Angle Square With Stop, 1/25° Graduation, Carbon Steel - Metav IndustryLine
Take advantage of the 125 mm multi-angle gauge for rapid setup, reliable alignment and repeatable positioning — the combination of compact dimensions, factory 1/25° angular standard and a robust stop reduces adjustment time and rejects on the shop floor. Order directly via Metav Werkzeuge or contact the consultants for application advice. Multi-angle square 125 mm — compact, factory-standard angle master with stop (Metav IndustryLine) Multi-angle square 125 mm is a compact inspection and setting gauge for workshop and fixture use, combining a short, rigid body with a positive stop and factory angular standard for repeatable results. Compact 125 mm working length Factory standard 1/25° angular tolerance Made from robust mild steel Positive stop for repeatable positioning Faster, measurable alignment through defined angular tolerance The short, rigid body and factory standard 1/25° ensure that angular checks and set-ups are carried out with consistent results. The declared tolerance of 1/25° (~0.04°) converts a vague visual inspection into a quantifiable check, reducing rework and machine downtime. By defining the angular deviation numerically, the gauge supports faster decision-making during setup and inspection, which translates into measurable productivity gains on production lines and in toolrooms. Durable construction that keeps fixtures stable Forged from mild steel, the tool delivers dependable stiffness for contact checks and bench use while remaining lightweight at 0.2 kg. The robust material choice provides resistance against knocks and everyday workshop wear, yet keeps handling comfortable for single-person operation. The integrated stop locks the measuring face in a reproducible position, so repeat checks do not require complex clamping or additional fixturing — a straightforward way to increase throughput when working on jigs, small assemblies or maintenance tasks. Ready-made angle options for versatile inspection tasks A set of built-in references at 90°, 45°, 30° and 120° covers the most common control and set-up angles in metalworking, fabrication and assembly. This multi-angle approach removes the need to switch tools for routine checks and enables quick cross-referencing between datum faces, making the gauge a practical choice for quality control, bench setup and quick-change fixturing. The compact length of 125 mm balances reach and stiffness, making it ideal for confined spaces and precise corner controls. Precision combined with pragmatic workshop support Specification-led design allows the gauge to function as both a control instrument and a workshop tool: the factory angular standard simplifies incoming inspection routines and the compact form factor supports frequent, on-the-bench use. Complementary service from Metav IndustryLine and the Emmerich quality filter ensures that supplied items meet the stated characteristics and that technical guidance is available for integration into quality processes. For traceability, the item is identified by its article data and can be referenced in inspection protocols and equipment logs. Contact Metav Werkzeuge for tailored advice on integrating the Multi-angle square 125 mm into existing setup procedures or to request stock and delivery information from Emmerich. Technical Data Article number: M214.445 GTIN: 4054469108810 ECLASS: 21170139 Facts Length: 125 mm Angular tolerance: 1/25° (≈ 0.04°) Weight: 0.2 kg Tariff number: 90178090 Special features Material: mild steel (normal steel) Angles included: 90°, 45°, 30°, 120° Feature: with stop Norm: factory standard 1/25° FAQ What is the declared angular tolerance of the multi-angle square? The multi-angle square is supplied to a factory standard of 1/25° (approximately 0.04°), which provides a clear numerical basis for angular checks and setup documentation. Which angles are available on this gauge? The tool includes fixed references at 90°, 45°, 30° and 120°, enabling fast verification of common angles used in fixtures and assemblies. Is the gauge suitable for daily workshop use? Yes; manufactured in mild steel and weighing 0.2 kg, the square is designed for routine bench and workshop applications where a compact, robust angle master is required. How is the item identified for inventory and traceability? The product is listed as Article number M214.445 and GTIN 4054469108810 for procurement and inspection records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150 x 100 mm Carpenter's Square Flat Zinc-Plated, Werk Norm - Metav IndustryLine
Take advantage of the combination of corrosion resistance from a flat galvanised finish, compact 150 x 100 mm format and low weight for quick, repeatable layout work; order the machinist's square directly via Metav Werkzeuge or ask the consultants for application advice. Machinist's square M214.504 — flat galvanised, 150 x 100 mm (Metav IndustryLine) Machinist's square M214.504 is a compact, flat galvanised layout tool for straightforward alignment, marking and squaring tasks in metal workshops Flat galvanised finish Special steel construction Compact 150 x 100 mm profile Factory standard accuracy Reliable squaring where corrosion resistance matters The flat galvanised surface on this layout tool provides durable protection against rust and handling wear, ensuring a longer service life in busy workshop environments. Constructed from special steel, the square maintains a stable edge that resists deformation during frequent use. These material choices translate into fewer replacements and consistent reliable alignment for everyday fabrication and maintenance tasks. Compact format for fast layout and improved access With a 150 x 100 mm blade and a low mass of 0.2 kg, this square is designed for confined workspaces and quick one‑handed positioning. The compact profile allows easy access to tight joints and small components while the flat construction minimises interference when scribing or clamping. The result is faster set-up times and repeatable right angles for routine marking and assembly operations. Workshop-grade standard and supply confidence Built to a workshop or factory standard, the tool offers predictable performance without over‑specification. As part of the Metav IndustryLine, the square benefits from a reliable distribution channel and quality control that suits trade and industrial users. The combination of a corrosion‑resistant finish, compact geometry and sturdy steel construction supports a pragmatic workflow: durable tools that stay serviceable and are straightforward to integrate into daily production. For robust, corrosion‑resistant squaring choose the Metav IndustryLine machinist's square M214.504 and contact Metav Werkzeuge for ordering details or specific application advice. Technical data Article number: M214.504 GTIN: 4054469108919 Category: Messgeräte › Winkel Facts Dimensions: 150 x 100 mm Weight: 0.2 kg Tariff number: 90178090 Special features Material: Special steel, galvanised Finish: Flat galvanised Standard: Factory standard (Werksnorm) FAQ What materials is the machinist's square suitable for? The Machinist's square M214.504 is made from special steel with a galvanised finish; it is intended for layout and marking on metal components and routine workshop use. How compact is the layout tool for use in tight spaces? With a blade size of 150 x 100 mm and a weight of 0.2 kg, the square is purposely compact to access confined areas while remaining stable for reliable marking. Does the square come with a calibration certificate? The product is supplied to factory standard; no ISO 17025 calibration certificate is included for the Machinist's square M214.504 unless explicitly specified in a separate listing. Which standard governs the accuracy of this type of square? This layout tool is produced to a workshop (factory) norm; it is suitable for general metalworking and maintenance tasks rather than laboratory calibration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150 x 100 mm Hair Gauge, Grade 00 Black Patinated, Hardened Tool Steel Hair Edge, DIN 875/00, Supplied in Case - Metav IndustryLine
The combination of DIN 875 Class 00 conformity, a hardened tool steel measuring edge and a compact 150 x 100 mm format ensures repeatable right-angle checks and durable shop use; benefit from precise layout and inspection without compromise. Order directly via Metav Werkzeuge or consult our specialists for application advice. Hairline Square 150 x 100 mm – hardened tool steel, Class 00 (Metav IndustryLine) Hairline Square 150 x 100 mm for precision layout and inspection of right angles in metalworking and toolmaking DIN 875 Class 00 accuracy Hardened tool steel edge Black-oxidised hairline measuring edge Compact 150 x 100 mm size Repeatable right-angle checks with metrology-grade accuracy This square is manufactured to DIN 875 and delivered in Class 00, providing a measurement standard intended for the most demanding layout and inspection tasks. The geometry is held to tight tolerances so that right angles remain reproducible when used for scribing, checking mating faces or validating jig alignment. Conforming to this standard means the tool supplies an objective basis for quality control and reduces rework by identifying squareness errors early in the process. Durable construction for everyday workshop handling Built from tool steel with a hardened hairline edge and a black-oxidised finish, the instrument resists blunting and surface corrosion while preserving the fine measuring edge required for precise scribing and visual alignment. The hardened measuring edge reduces wear during repeated contact with metal and abrasive surfaces, extending the service life of the instrument and maintaining measurement stability over time. The protective finish also minimises reflections, improving visibility of the hairline in varied lighting. Practical dimensions and efficient layout workflow With a working face of 150 x 100 mm, the square offers a balance between reach and rigidity that suits bench work, toolmaking and general machine-shop tasks. Its compact size allows secure single‑hand positioning while the blunt masses typical of larger squares are avoided, which reduces measurement uncertainty due to flex. The hairline edge provides a crisp reference for scribing and optical alignment; when paired with standard layout blocks or surface-plate setups, this format helps maintain a fast and reliable workflow without sacrificing precision. Choose the Metav IndustryLine Hairline Square for reliable, standardised squareness checks and contact Metav Werkzeuge for tailored advice on fitment and inspection tasks — info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: M214.135 GTIN: 4054469106809 Standard: DIN 875/00 Dimensions: 150 x 100 mm Material: Tool steel with hardened, black-oxidised hairline measuring edge Customs tariff number: 90178090 Facts Accuracy class: 00 Application: Layout, inspection, right-angle verification Finish: Black-oxidised Mass information: see product labelling Special features Hairline measuring edge for scribing and optical alignment Hardened measuring face for improved wear resistance Compact format for bench and toolroom use Conforms to DIN 875 metrology standard FAQ What level of accuracy can be expected from this square? The instrument meets DIN 875 Class 00, delivering metrology-level squareness suitable for high-precision layout and inspection tasks with repeatable results. Is the measuring edge hard enough for routine shop use? Yes, the hardened tool steel measuring edge resists wear during regular contact with metal, preserving edge integrity for consistent marks and checks. Which tasks is the 150 x 100 mm format best suited to? This compact format is ideal for bench layout, jig inspection and toolmaking where a balance of reach and rigidity is required; it is commonly used for scribing, checking mating faces and validating fixture squareness. Does the product include any protective finish to reduce corrosion? The square is supplied with a black-oxidised finish, which reduces surface reflections and provides basic corrosion protection while improving hairline visibility. What is the product SKU for ordering or reference? The reference SKU is M214.135 and the item is offered under the Metav IndustryLine range for straightforward procurement and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150 x 100 mm Hair Square Flat Hardened Measuring Edge, Stainless Steel, DIN 875/00 - Metav IndustryLine
Take advantage of Grade 00 accuracy and a hardened measuring edge for reliable 90° references in inspection and layout work; the matt‑chrome, stainless construction combines corrosion resistance with durable service life. Order the hairline square directly via Metav Werkzeuge or request advice from the consultants if further specification is required. Hairline square 150 x 100 mm — Grade 00, stainless steel, DIN 875/00 (Metav IndustryLine) The hairline square 150 x 100 mm provides a compact, flat profile for high‑precision angle checks and layout tasks in toolrooms and inspection stations. Grade 00 accuracy to DIN 875/00 Hardened measuring edge, matt chrome finish Stainless steel construction, corrosion‑resistant Flat profile for confined or recessed applications Consistent right angles and measurable confidence The Grade 00 classification to DIN 875/00 ensures the right angle reference is held to the highest workshop standard for engineer's squares. This level of conformity reduces uncertainty during visual inspection, marking and set‑up, so that components can be registered against a reliable 90° datum. The hairline edge gives a fine, unambiguous line for scribing and optical alignment, improving repeatability on the shop floor and in quality control. Robust finish and edge retention for everyday use Manufactured from stainless steel with a matt chrome finish and a hardened measuring edge, the instrument resists corrosion and preserves its working face under frequent contact and cleaning. The flat profile eases access to tight joints and recessed shoulders, while the modest mass contributes to a stable feel without excessive bulk. These construction choices lower the need for early replacement and maintain the instrument’s measuring integrity over many inspection cycles. Designed for practical metrology and clear traceability The compact dimensions of 150 x 100 mm make this square a practical reference for layout benches, jigs and small assemblies where space is at a premium. The model is clearly identified as M214.005 and carries standard trade identifiers for inventory and traceability in production environments. As a precision tool with a hardened edge and corrosion‑resistant finish, it supports reliable routine checks and assists in maintaining machining tolerances and assembly fit. For precision layout and inspection tasks select the Metav IndustryLine hairline square and contact Metav Werkzeuge for purchasing or technical consultation. Technical Data Article number: M214.005 GTIN: 4054469106007 ECLASS: 21170127 Customs tariff number: 90178090 Facts Dimensions: 150 x 100 mm Weight: 0.4 kg Accuracy class: 00 Standard: DIN 875/00 Special features Material: stainless steel, matt chrome finish Hardened measuring edge Flat profile Category: Angle / Square FAQ How accurate is the hairline square for routine inspection? The hairline square meets Grade 00 to DIN 875/00, offering the highest standard of workshop accuracy for right‑angle references and layout checks. What materials and finish are used on this model? The square is made from stainless steel with a matt chrome finish and a hardened measuring edge, chosen to resist corrosion and prolong edge life in regular use. Which applications suit the 150 x 100 mm size? The 150 x 100 mm format is suited to toolroom layout, small‑assembly alignment and inspection benches where a compact, stable 90° reference is required. How can this model be identified in stock or documentation? This instrument is listed as M214.005 with GTIN 4054469106007 for clear traceability in procurement and asset management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150 x 100 mm Inspection Square Flat, DIN 875/1, Carbon Steel - Metav IndustryLine
Rely on a compact, flat control tool that combines DIN 875/1 accuracy with a practical 150 x 100 mm measuring face for consistent right‑angle verification; order via Metav Werkzeuge or consult our specialists for application advice. Inspection square M214.345 — control square 150 x 100 mm, DIN 875/1 (Metav IndustryLine) The Inspection square M214.345 is a flat control square designed for fast right‑angle checks and alignment tasks in workshop and quality‑control environments. DIN 875/1 accuracy class 1 Flat design for tight corner access Size 150 x 100 mm for workshop checks Made from standard steel Fast verification for repetitive checks The compact design brings reliable right‑angle verification to benchwork and machine set‑ups. With its 150 x 100 mm faces the tool excels where a balance of reach and stiffness is required: enough length for common jigs but short enough for steady handling. The calibrated geometric reference per DIN 875/1 ensures measurements are repeatable, reducing rework and downtime by cutting the time required for manual squaring operations. Robust flat profile for tight geometries A flat body profile allows access into confined corners and shallow fixtures where bulkier gauges fail to reach. Machined faces provide stable contact and the use of standard steel gives a solid, wear‑resistant surface that tolerates daily workshop use. The combination of a low‑profile form and hard working surfaces makes the piece suitable for quick alignment tasks and frequent comparative checks without compromising the integrity of mating components. Clarity for quality control documentation Designed with inspection workflows in mind, the tool supports rapid pass/fail decisions on assemblies and welded frames. The class‑rated accuracy (DIN 875/1) provides a clear technical basis for inspection records and traceability. For routine quality checks the instrument functions as a trusted reference in manufacturing lines, toolrooms and maintenance departments where consistent angle fidelity is necessary to meet drawing tolerances. Practical handling and storage guidance The compact format is easy to position and manoeuvre with one hand or alongside clamped workpieces, lowering measurement uncertainty from awkward handling. After use, short‑term protection from corrosion and knocks preserves the machined faces; a simple light oiling and secure storage prevents nicks. For workshops seeking a dependable, low‑maintenance right‑angle reference, the square combines straightforward care with industry‑grade accuracy. Choose the Metav IndustryLine control square for dependable inspection results; contact Metav Werkzeuge in Emmerich for tailored application advice and ordering assistance. Technical data Article number / SKU: M214.345 GTIN: 4054469108278 Tariff number: 90178090 Dimensions & accuracy Measuring faces: 150 x 100 mm Accuracy class: DIN 875/1 Classification: eClass 21170119 Materials & special features Material: standard steel Design: flat profile for close corner access Category: inspection square / angle FAQ How precise is this control square for workshop checks? The inspection square M214.345 is manufactured to DIN 875/1 and therefore provides a high‑accuracy reference suitable for most workshop and production quality checks. Can the square be used for alignment on welded frames and assemblies? Yes, the flat profile and machined faces make the control square well suited for alignment and right‑angle verification on welded frames, jigs and small assemblies. What material is the tool made from and how durable is it? The unit is made from standard steel, providing a durable, wear‑resistant contact surface appropriate for frequent use in industrial environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Angle Square, Steel Zinc-Plated With Wing Nut - Metav IndustryLine
Take advantage of robust mild steel construction, a zinc-plated finish and quick wing-nut adjustment for dependable positioning and low-maintenance use — order the M214.941 adjustable angle bracket directly via Metav Werkzeuge or contact our consultants for integration advice. Adjustable angle bracket, 150 mm, mild steel, zinc-plated — Metav IndustryLine An adjustable angle bracket, 150 mm, mild steel, zinc-plated, designed for positioning, bracing and simple fixturing in workshop and metalworking environments Zinc-plated mild steel construction Compact 150 mm length for tight spaces Integrated wing nut for quick clamping Suitable for general workshop fixturing Precise, corrosion-resistant support for everyday fixturing The compact 150 mm bracket combines mild steel body and zinc-plated surface to deliver a balance of stiffness and corrosion resistance that suits repeated workshop use. Its short span keeps deflection low so that positional accuracy remains stable during assembly tasks; this makes the component particularly suitable where a reliable right-angle stop or temporary brace is required. The construction prioritises mechanical simplicity, which reduces failure modes and supports continuous production workflows. Fast setup and straightforward integration into jigs A simple wing nut fastening enables fast clamping and release, shortening setup times at assembly benches and on small jigs. The fastening concept allows coarse positioning followed by quick tightening, so fixtures can be adapted on the fly without special tools. Where repeated adjustments are needed, the bracket’s compact geometry simplifies handling and storage, supporting lean processes and saving operator time during routine changeovers. Robust design for low maintenance and long service life The choice of mild steel with a zinc-plated finish provides a cost-effective, durable solution that resists surface corrosion and abrasion in standard workshop atmospheres. The bracket’s plain, proven design minimises the need for lubrication or special care and reduces lifecycle costs compared with more complex fixturing components. For operations that require dependable, long-term support without intensive upkeep, this bracket offers consistent performance. Typical uses where compact, reliable support matters The bracket is ideal for light to medium fixturing tasks: temporary stops, edge supports, small assembly jigs and simple bracing in metalworking or general workshop applications. Its compact 150 mm length suits tight layouts and subassemblies where larger angle stops would be impractical. Where uncomplicated, repeatable positioning is needed, the part serves as a practical and economical element within a broader fixturing strategy. Speak to Metav Werkzeuge for delivery from Emmerich and technical guidance on integrating the M214.941 adjustable angle bracket into workshop fixtures Technical data Article number: M214.941 Manufacturer: Metav IndustryLine Description: Adjustable angle bracket, 150 mm, mild steel, zinc-plated Facts Length: 150 mm SKU: M214.941 Special features Mild steel construction Zinc-plated finish Wing nut fastening FAQ What materials form the basic construction of this bracket? The M214.941 adjustable angle bracket is made from mild steel and is zinc-plated to provide surface corrosion protection. Is the zinc-plated coating suitable for workshop environments? Yes, the zinc-plated finish on the Metav IndustryLine bracket offers reliable corrosion resistance for typical workshop and indoor metalworking conditions. How is the bracket secured in position? Positioning is achieved using the integrated wing nut, allowing quick manual tightening and straightforward adjustment without tools. What applications suit the 150 mm length best? The 150 mm length is ideal for compact fixtures, temporary stops, small jigs and subassembly supports where space is limited but stable positioning is required. Can the bracket be used as a permanent fixture component? The robust mild steel construction and zinc-plated finish make the M214.941 suitable for long-term use in many workshop applications when mounted correctly and maintained as part of standard shop practice. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Hexagon Square 120° Steel No Stop, DIN 875/2 - Metav IndustryLine
Combine robust mild steel construction, conformity to DIN 875/2 and compact 150 x 150 mm measuring faces for dependable workshop alignment; order via Metav Werkzeuge or ask our consultants for specification support. Hexagonal Angle 120° – 150 x 150 mm Angle Gauge, Mild Steel (Metav IndustryLine) The Hexagonal Angle 120° is a compact angle gauge for workshop layout and inspection, offering stable measuring faces and conformity with common metrological practice. 120° precision angle DIN 875/2 150 x 150 mm measuring faces Made from mild steel No stop for unrestricted alignment Accurate alignment for production and inspection The 120° hexagonal angle is designed for repeatable alignment tasks and quick inspection routines. The combination of defined geometry and reference faces delivers precision when checking compound angles, layout work or simple set‑up procedures. Conformity with DIN 875/2 ensures that the gauge meets recognised tolerance frameworks, which simplifies integration into existing quality control procedures and supports traceable inspection records. Practical design that fits the workshop With 150 x 150 mm measuring faces in a compact form, this gauge balances reach and handling. The mild steel construction gives robust behaviour under everyday workshop stresses while remaining easy to position and manoeuvre. The version supplied without stop allows unobstructed placement against irregular or large components, enabling flexible use on assembly benches, fixtures and machine set‑ups where a fixed stop would limit access. Material choice and usability benefits Manufactured from mild steel, the gauge offers a pragmatic compromise between durability and cost‑efficiency for general metalworking applications. The material supports straightforward maintenance and long service life when kept free from corrosive environments and lubricated as part of routine care. The compact geometry enables quick visual checks and reliable reference surfaces for grinding, welding and inspection tasks, contributing to smoother workflows on the shop floor. For reliable workshop alignment and standards‑based inspection, contact Metav Werkzeuge for more information on the Metav IndustryLine hexagonal angle (SKU M214.455) and receive tailored advice for your application. Technical data Article number: M214.455 GTIN: 4054469108889 eCl@ss: 21170119 Facts Dimensions: 150 x 150 mm Material: Mild steel Standard: DIN 875/2 Tariff code: 90178090 Special features Hexagonal angle at 120° Without stop Category: Angle gauges (Winkel) FAQ What is the intended use for this hexagonal angle? The hexagonal angle is intended for alignment, layout and inspection tasks where a defined 120° reference and compact measuring faces are required. Does the gauge comply with recognised standards? Yes, the tool is produced to the tolerances and format referenced under DIN 875/2, making it suitable for standard workshop and inspection duties. Which material is the angle made from and what are the benefits? The angle is made from mild steel, offering a durable, workshop‑friendly balance between strength and ease of maintenance for general metalworking. Is there a version with a stop or vice compatibility mentioned? This model is supplied without stop, allowing flexible placement against larger or irregular components; compatibility with specific vices depends on the vice geometry. How is the product identified for ordering or inventory? The product is listed under SKU M214.455 and GTIN 4054469108889 for straightforward ordering and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Multi-Angle Square With Stop, 90°/45°/30°/120°, Factory Standard 1/25° - Metav IndustryLine
Compact multi-angle square combining 150 mm measuring length with robust normal steel construction and a factory Werksnorm 1/25° reference; benefits include repeatable angle checks and a practical integrated stop. Order the gauge directly via Metav Werkzeuge or consult our technical advisors for application support. Multi-angle square M214.446 — 150 mm workshop gauge, Werksnorm 1/25° (Metav IndustryLine) The Multi-angle square M214.446 is a compact precision gauge for workshop layout, assembly checks and quick inspection tasks; it provides a stable reference for angular and edge alignment across standard machine‑shop assemblies. 150 mm measuring length Werksnorm 1/25° for consistent angular references Normal steel construction with integrated stop Repeatable accuracy: 0.04 mm Precision and consistent results for production work Built to deliver repeatable checks, this multi-angle gauge offers an accuracy of 0.04 mm, making it suitable for routine inspection and setup tasks where consistent angular references are required. The Werksnorm 1/25° marking ensures that angular positions are referenced to a factory standard rather than being left to approximation, which reduces set‑up time and prevents avoidable rework. For workshop personnel who need dependable, fast checks rather than laboratory-level metrology, the result is measurable time savings and fewer setup iterations. Robust design that supports daily handling Manufactured from normal steel, the gauge balances toughness with manageable weight (0.2 kg), so it withstands routine workshop use while remaining easy to handle. The integrated stop enhances positioning stability during marking and alignment operations, which is particularly helpful when clamping or supporting larger assemblies. The compact profile and durable construction make the tool a practical addition to the standard toolset for machinists, fitters and assembly technicians who require a reliable physical reference rather than a temporary makeshift jig. Where this gauge adds immediate value Classified in the standard range for handheld layout tools (measurement range up to 300 mm), this multi-angle square is intended for general machine‑ and metal‑working environments. Typical uses include angle verification during fixture assembly, quick squaring of housings and positional checks on welded components. The simple form factor supports straightforward, one-handed handling and fast repetition of the same check across multiple parts, improving workflow continuity on both the shop floor and bench‑level inspection points. For product enquiries or to secure a supply from our European warehouse, contact Metav Werkzeuge for tailored advice or to place an order by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M214.446 GTIN: 4054469108827 Measurement length: 150 mm Accuracy: 0.04 mm Weight: 0.2 kg Material: Normal steel Standard: Werksnorm 1/25° Customs tariff number: 90178090 Measured values Measuring range classification: Standard (≤ 300 mm) Repeatability: workshop-grade repeatability indicated by accuracy value Suitable for routine angle and edge checks Materials & features Integrated stop for stable positioning Robust normal steel body for everyday handling Compact format for one‑hand operation FAQ What accuracy can be expected from this multi-angle square? The Multi-angle square M214.446 from Metav IndustryLine is specified with an accuracy of 0.04 mm, suitable for repeatable workshop checks and setup tasks. Is the tool suitable for precision inspection or only for layout work? This gauge is intended for reliable workshop layout and routine inspection; it provides consistent angular references but is not a substitute for laboratory-grade metrology instruments. What materials is the gauge made from and how does that affect use? Constructed from normal steel, the M214.446 combines durability with a compact weight profile, making it robust for daily shop use while remaining easy to handle. Which measurement range category does the gauge belong to? With a measuring length of 150 mm, the instrument falls into the standard classification for workshop calipers and gauges (up to 300 mm), offering a balance between reach and stiffness. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150x100 mm Angle Plate With Stop, Hardened Stainless Steel DIN 875/0 - Metav IndustryLine
Take advantage of the combination of DIN 875/0 accuracy, hardened stainless steel construction and a built‑in stop for reliable, repeatable squaring in both workshop and inspection tasks. Order the item directly via Metav Werkzeuge or consult our advisers for application guidance. Metav IndustryLine Precision Engineer's Square M214.315 — 150×100 mm, DIN 875/0 (stainless steel) The Precision Engineer's Square M214.315 is a compact, hardened stainless steel squaring tool with an integrated stop, designed for accurate layout and alignment work in machining and quality control environments. Precision grade DIN 875/0 accuracy Hardened stainless steel construction Built-in stop for repeat positioning Compact 150×100 mm footprint Reduce rework with consistent squaring Manufactured to DIN 875/0, the square delivers the high precision required for critical setup and inspection operations. The DIN grading guarantees a defined tolerance band, which supports fast decision‑making on the shop floor and reduces rework caused by uncertain reference geometry. The hardened stainless steel blade maintains a true edge under frequent contact, preserving the reference over many cycles and ensuring reproducible alignment when checking housings, faces or mating surfaces. Faster setup through compact, repeatable positioning The compact 150×100 mm format combines reach and rigidity for everyday bench tasks while remaining easy to handle. The integrated stop enables rapid, repeatable positioning of components for marking, drilling or inspection without the need for additional fixturing. Its footprint suits workbenches and measuring tables where space is limited, offering a practical balance between reach and control that supports efficient, single‑person workflows in production and maintenance. Corrosion resistance and workshop durability Constructed from hardened stainless steel, the tool resists corrosion and preserves measurement integrity in typical industrial atmospheres. The robust build tolerates routine contact and light knocks without compromising the squaring face, which helps maintain traceable reference geometry over long service intervals. As a precision tool supplied by Metav IndustryLine, it aligns with a parts‑centric approach to quality — providing a trustworthy reference instrument for layout, inspection and fixture checks. For reliable squaring in assembly, inspection or layout, contact Metav Werkzeuge to check availability of the Metav IndustryLine Precision Engineer's Square M214.315 and to receive tailored advice for the intended application. Technical data Article number: M214.315 GTIN: 4054469108032 Standard: DIN 875/0 Material: hardened stainless steel Dimensions: 150 x 100 mm Tariff number: 90178090 Facts Accuracy class: DIN 875/0 Format: 150×100 mm EClass: 21170119 SKU: M214.315 Special features With integrated stop Hardened stainless steel construction Compact footprint for bench and inspection use Suitable for layout and squaring tasks FAQ What level of accuracy does this square provide? The Metav IndustryLine Precision Engineer's Square M214.315 conforms to DIN 875/0, providing the high accuracy expected for workshop inspections and precise setup tasks. What material is the tool made from and how does that help? The square is made of hardened stainless steel, which offers corrosion resistance and long‑term preservation of the squaring faces under routine use. Is the built‑in stop suitable for repeated positioning? Yes, the integrated stop enables repeatable positioning for marking, drilling and inspection, reducing the need for additional fixtures during repetitive work. Which applications match the 150×100 mm format? The compact 150×100 mm footprint is ideal for bench‑top layout, fixture checks and small to medium workpieces where a rigid, easy‑to‑handle reference is required. What identifiers should be used when ordering or referencing this tool? Use the SKU M214.315 or GTIN 4054469108032 to reference the Metav IndustryLine Precision Engineer's Square M214.315 reliably. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150x100 mm Angle Stop With Stop, Hardened Stainless Steel, DIN 875/1 - Metav IndustryLine
Combine hardened stainless-steel construction with DIN 875/1 conformity to secure a stable, corrosion‑resistant right‑angle reference for workshop use. The 150×100 mm format provides a practical balance of reach and stiffness for routine layout and inspection tasks. Order the precision square directly via Metav Werkzeuge or consult our specialists for application guidance. Engineer's square M214.335 – 150×100 mm, hardened stainless steel (Metav IndustryLine) A robust Engineer's square M214.335 designed for right‑angle referencing and layout in metalworking and general workshop environments, compliant with DIN 875/1 Hardened stainless‑steel construction DIN 875/1 accuracy class Compact 150×100 mm format Integrated stop for repeatable placement Consistent right‑angle reference that endures The hardened stainless‑steel construction delivers durability and corrosion resistance, ensuring stable performance in workshop and production environments. Conforming to DIN 875/1 provides a recognisable quality benchmark for right‑angle accuracy, which in practice means reliable squaring for assembly, set‑up and inspection tasks. The robust build reduces wear at the blade and stock junction, preserving the squaring over prolonged use and minimising rework. Practical size with secure handling and repeatability The 150×100 mm footprint offers sufficient reach for typical engineering components while retaining the stiffness needed for reproducible measurements. The moderate mass and form factor give a stable platform for manual positioning; an integrated stop facilitates consistent placement against fixtures or workpieces, reducing cycle time during repeated layout operations. This combination supports efficient workflow without sacrificing the rigidity required for precise right‑angle checks. Clear benefits for shopfloor and inspection use Made to withstand daily use, the angle is suited for routine layout, assembly checks and as a reference during jig and fixture alignment. The hardened finish extends service life and helps retain edge geometry, while the stainless surface makes the tool low‑maintenance in mixed workshop conditions. As a standardised reference tool, it supports traceable processes and helps maintain conformity across production steps, delivering both operational efficiency and dependable results. For dependable squaring in the workshop, select the Metav IndustryLine M214.335 from Metav Werkzeuge; contact Metav Werkzeuge for tailored advice on how this precision square can be integrated into existing inspection routines or production processes. Technical data Article number: M214.335 GTIN: 4054469108193 Category path: Messgeräte › Winkel eClass: 21170119 Facts Dimensions: 150×100 mm Customs tariff code: 90178090 Special features Material: stainless steel, hardened Standard: DIN 875/1 Feature: with integrated stop Label: Anschlagwinkel 150x100 mm, INOX FAQ What level of accuracy does this square offer? The Metav IndustryLine M214.335 meets DIN 875/1, providing a standardised accuracy class suitable for workshop and general inspection tasks where a recognised right‑angle reference is required. Is the material suitable for harsh workshop environments? Yes, the square is made of hardened stainless steel, giving good corrosion resistance and robust wear characteristics for typical shopfloor conditions. Can the tool be used for repeated layout against fixtures? The integrated stop allows the square to be positioned repeatedly with consistent contact, making it well suited for cyclical layout operations and fixture alignment. Which dimensions should be expected when planning jigs? The working dimensions are 150×100 mm, offering a compromise between reach and rigidity that fits common fixture and component sizes. Does the M214.335 require special maintenance to retain accuracy? Routine cleaning and avoidance of heavy impacts will preserve the hardened edges and squareness; no special surface treatment is required beyond standard workshop care. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150x100 mm Angle Stop With Stop, Hardened Stainless Steel, DIN 875/2 - Metav IndustryLine
Angle stop combines sturdy, hardened stainless steel construction with DIN 875/2 accuracy and an integrated stop for repeatable fixturing — ideal for production and inspection tasks. Order the item directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. Angle stop 150 x 100 mm (DIN 875/2) — Machinist's square, hardened stainless (Metav IndustryLine) The Angle stop 150 x 100 mm (DIN 875/2) is a hardened stainless-steel machinist's square with an integrated stop, designed to provide repeatable right-angle referencing and fixturing for workshop and inspection environments. Hardened stainless-steel construction DIN 875/2 tolerance grade Integrated stop for repeatable fixturing Consistent right-angle control for production and inspection The combination of a machined face and DIN 875/2 tolerance ensures reliable squaring where dimensional conformity matters. As a machinist's square, it provides a stable reference for setting up workpieces, verifying fixture alignment and checking assembly squareness. The clear assignment of tolerance communicates measurable expectations and reduces uncertainty during incoming inspection, helping to lower scrap rates and rework through repeatable verification. Durable stainless design minimises downtime Made from hardened stainless steel, the tool resists corrosion and maintains edge integrity under regular workshop use. This material choice reduces the need for frequent surface maintenance and guards against dimensional drift caused by surface wear. The result is a long-lived reference tool that supports continuous production, sustaining measurement quality without frequent replacement. Integrated stop for efficient, repeatable fixturing The built-in stop converts the square into a rapid indexing aid for repetitive tasks; workpieces can be presented to the same datum quickly, cutting setup time. This pragmatic feature streamlines fixtures and assembly jigs by providing a positive abutment, which translates into faster cycle times and more consistent part orientation on the bench or in a light assembly cell. A practical choice from a dependable partner Supplied under the Metav IndustryLine label, the component pairs workshop practicality with industry-focused availability. Metav’s position as a European distribution and quality filter means access to a broad product range and consolidated sourcing; this angle stop fits into a system approach where tooling reliability and supply stability matter. For operations seeking predictable measurement references, the product delivers straightforward performance where it is needed most. Contact Metav Werkzeuge in Emmerich for specification matching and to discuss how the Metav IndustryLine angle stop can be integrated into existing inspection routines — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M214.375 GTIN: 4054469108513 Customs tariff number: 90178090 ECLASS: 21170119 Standard: DIN 875/2 Dimensions & core data Dimension: 150 x 100 mm Special features Hardened stainless steel With integrated stop Grade: DIN 875/2 Category: Angle / Machinist's square FAQ What accuracy does this square provide according to DIN 875/2? The Angle stop 150 x 100 mm (DIN 875/2) meets the DIN 875/2 tolerance, offering a level of squaring accuracy suited for workshop and inspection tasks that require confirmed right angles. Can the tool be used for repeatable fixturing operations? Yes — the integrated stop converts the machinist's square into a repeatable abutment for quick, consistent workpiece positioning during series setups. Is the angle stop suitable for use in humid or workshop environments? Constructed from hardened stainless steel, the device resists corrosion and is well suited to typical workshop conditions where moisture or coolant exposure may occur. How should this square be maintained to preserve accuracy? Routine cleaning and protection from heavy knocks will preserve the machined faces; the hardened stainless finish reduces maintenance frequency compared with untreated steels. Which applications is this item intended for? The component is intended for squaring, fixture set-up and inspection tasks where a stable right-angle reference and repeatable abutment are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150x100 mm Angle Stop, With Stop, DIN 875/1, Carbon Steel - Metav IndustryLine
Take advantage of the combination of DIN 875/1 conformity, robust normal steel construction and an integrated stop for consistent layout and quicker setup times. Order the angle directly via Metav Werkzeuge or consult our advisors if specific workshop requirements need clarification. Engineer’s square 150 x 100 mm — DIN 875/1, normal steel (Metav IndustryLine) Engineer’s square 150 x 100 mm for precise right‑angle referencing, marking and inspection tasks in machine shops and metalworking environments DIN 875/1 accuracy class Hardened normal steel blade and stock Size 150 x 100 mm for workshop tasks Integrated stop for repeatable layout Reliable reference for workshop layout The engineer’s square 150 x 100 mm provides a stable, certified reference for right‑angle checks and layout work. Compliant with DIN 875/1, it meets established tolerances for workshop squares, which translates into measurably lower rework and faster set‑up cycles. The standardised accuracy allows qualification against inspection routines and supports consistent recording of tolerances in production documentation, improving traceability during quality assessments. Stiff construction that supports repeatability Made from normal steel with a stout profile, this angle square delivers a well‑balanced mix of rigidity and manageable handling for bench and hand‑held tasks. The 150 x 100 mm footprint covers the most common component sizes while keeping bending and deflection to a minimum compared with longer instruments. That mechanical stability results in more repeatable markings and a dependable datum when transferring measurements between workpieces or fixtures. Built for throughput and workshop conditions An integrated stop simplifies serial marking and jig set‑up by providing a quick datum for repeated transfers, which reduces cycle time in small‑batch production. The finished faces withstand routine workshop exposure and integrate smoothly with inspection benches and layout tables. For planning and specification queries, technical advisors can advise on how this angle best fits into existing measurement routines and production flows. For dependable workshop squaring choose the Metav IndustryLine engineer’s square and contact Metav Werkzeuge in Emmerich for ordering or specification advice: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M214.355 GTIN: 4054469108353 ECLASS: 21170119 Category: Angles Facts Dimensions: 150 x 100 mm Tariff number: 90178090 Special features Material: Normal steel Standard: DIN 875/1 Feature: with stop Manufacturer: Metav IndustryLine FAQ What accuracy class does this square conform to? The square conforms to DIN 875/1, providing the accuracy class specified for workshop engineer’s squares. Which tasks is the square suitable for? This engineer’s square is suitable for layout, marking and right‑angle inspection in machine shops and metalworking environments. Does the product include any special features to aid serial marking? Yes, the integrated stop on the angle simplifies repeated datum transfers and improves throughput for small series operations. What material is used and how does that affect durability? Constructed from normal steel, the square offers robust service in standard workshop conditions while maintaining a stable reference surface. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150x100 mm Bevel Square With Stop, Stainless Steel Hardened Edge, DIN 875/00, Supplied In Case - Metav IndustryLine
Take advantage of the combination of DIN 875 Class 00 accuracy, a hardened measuring edge and a corrosion‑resistant stainless construction for repeatable 90° inspections; order or request advice directly via Metav Werkzeuge for seamless supply and technical guidance. Hairline square 150 x 100 mm with stop — Precision inspection square (DIN 875/00) Hairline square 150 x 100 mm with stop for exact 90° alignment in toolrooms and inspection benches; a compact precision right‑angle gauge for layout, inspection and fixture checks Precision DIN 875 Class 00 accuracy Hardened measuring edge for wear resistance Stainless steel body with matt chrome finish Supplied in protective transport case Accurate right‑angle checks that save rework time The inspection square delivers measurable benefits where angle fidelity matters: the DIN 875 specification and Class 00 tolerance ensure minimal deviation when checking jigs, machined components and assembly fixtures. The integrated hairline reference improves sighting for layout and inspection tasks, reducing measurement ambiguity. By combining standardised accuracy with a compact form, the tool supports faster decision making on the shopfloor and lowers the risk of costly rework. Robust construction for daily workshop use Built from stainless steel with a matt chrome finish and a hardened measuring edge, this right‑angle gauge resists wear and corrosion in production environments. The added stop provides a fixed reference for repetitive positioning, improving consistency during serial checks or setup operations. The overall design balances rigidity and handling ease so that repeatable measurements are achievable without specialised fixtures, supporting efficient inspection routines in toolmaking and maintenance. Practical applications and compatibility with inspection processes Suited for layout work, incoming inspection and verification of 90° squareness in assemblies, the square is a compact solution for both bench and machine‑side checks. The tool functions as a dependable reference for aligning fixtures, verifying datum faces and confirming perpendicularity of housings and covers. Supplied in a protective transport case, the gauge is ready for secure storage and safe transfer between workstations while retaining its calibration window for traceable results. For reliable squareness in precision workshops, specify the Hairline square from Metav IndustryLine and contact Metav Werkzeuge for order details or technical consultation. Technical data Article number: M214.105 GTIN: 4054469106632 Material: stainless steel, matt chrome plated with hardened measuring edge Standard: DIN 875/00 Dimensions: 150 x 100 mm Facts Accuracy class: 00 Tariff code: 90178090 Special features With stop for fixed positioning Protective transport case included Corrosion‑resistant finish Inspection square for 90° checks FAQ What level of accuracy does this inspection square offer? The square conforms to DIN 875 Class 00, providing the high level of angular precision required for toolroom and inspection tasks. Is the measuring edge durable for regular workshop use? Yes; the hardened measuring edge and matt chrome finish on this inspection square give increased wear and corrosion resistance for daily operations. Does the Hairline square 150 x 100 mm with stop include a case? The product is supplied with a protective transport case to ensure secure handling and safe storage during transfers between workstations. Which applications suit this right‑angle gauge? This precision square is intended for layout, fixture alignment, incoming inspection and verification of perpendicularity in component and assembly checks. What is the article number for ordering or reference? The article number for the Hairline square is M214.105, listed under the Metav IndustryLine series. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ensure right angles every time with precision angle gauges
Angle measurement is decisive in metalworking, where even the smallest deviation from a 90° geometry can cause assembly errors or functional faults. The category covers both fixed verification tools and variable measuring instruments, presented here as angle gauges, with common synonyms control squares and sine bars used throughout.
Where and how these tools make the difference on the shop floor
For basic layout and rough alignment, the engineer’s square (a simple flat or bench square) serves as the workshop baseline; it is useful for marking and quick checks but not intended for precision components. When higher accuracy is required, control squares with hardened and lapped faces are used; they are produced in accuracy classes referenced by DIN 875 and designed for the light gap method, which reveals form errors by inspecting the gap between gauge and workpiece under illumination. In pipeline and vessel fabrication, the flange square provides a robust contact geometry to align flanged faces to pipe axes and to withstand high mechanical loading. For angles other than 90°, a sine bar enables trigonometrical determination by using end measures, achieving resolutions into the seconds of arc when set up correctly. Regular calibration and checks for wear and flatness of the legs are essential, since a rounded or damaged leg will distort results.
Practical advantages that reduce rework and speed production
- Reduced fitting errors through repeatable reference geometry using control squares.
- Clear detection of form errors with the light gap method (fast visual indication).
- Durable contact surfaces thanks to hardened and lapped faces, extending service life.
- Accurate non-90° measurement via sine bar setups, enabling fine angular adjustments.
- Stable alignment of flanged components with purpose-built flange squares, lowering assembly time.
Why Metav is the reliable partner for precision angle measurement
Metav stands for democratisation of precision. As an experienced precision partner, Metav combines decades of know-how with a comprehensive range for industry, craft and trade; over 48,000 customers trust this quality filter based in Emmerich. With a broad assortment and consistent supply, Metav simplifies procurement and ensures a dependable source for angle gauges, calibration accessories and workshop standards.
Quick summary
Accurate angle gauges — from basic engineer’s squares to high-precision control squares and sine bars — prevent costly fit problems and support reliable, repeatable manufacture. Choose tools matched to the required accuracy class and maintain them regularly to keep measurement integrity.
FAQ
What is the difference between an engineer’s square and a control square?
An engineer’s square is a workshop baseline for marking and rough checks, while a control square features hardened and lapped faces and is manufactured to tighter tolerances (per DIN 875) for inspection and detection of form errors.
How does the light gap method work for checking right angles?
The light gap method places the workpiece against a control square; uneven gaps visible under a light source indicate deviations from perpendicularity, providing an immediate visual assessment of form errors.
When should I use a sine bar instead of a fixed angle gauge?
Use a sine bar when you need precise angles other than 90°. By stacking end measures you set the desired angle trigonometrically, achieving much finer resolution than most fixed gauges allow.
How often should angle gauges be checked for wear?
Regular inspection of flatness and leg condition is mandatory; any rounding or damage to the legs can significantly falsify measurements, so schedule checks according to usage intensity and your quality control procedures.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com