Precision angle gauges for reliable right-angle control
Angle gauges and inspection squares provide dependable verification of right-angle geometry and ensure accurate alignment in metalworking assemblies. Used for tasks ranging from rough marking with a machinist's square to high-precision verification with hardened and lapped control angles, these tools prevent fitment errors and functional faults by detecting even minute deviations from 90° and other set angles. For heavy-duty applications such as flange alignment in piping and vessel fabrication, robust flange squares offer stable seating on curved surfaces, while sine bars and adjustable angle gauges enable trigonometrically exact measurements for non‑standard angles. Regular calibration and inspection of leg flatness and wear are essential to maintain measurement integrity.
150x100 mm Inspection Square Flat Stainless Hardened, DIN 875/0 - Metav IndustryLine
Combine standard-compliant accuracy with a hardened, corrosion‑resistant construction to secure reliable squareness; the flat profile and compact 150 x 100 mm format enable close contact and repeatable checks. Order the inspection square directly via Metav Werkzeuge or consult our advisors if additional information is required. Inspection square 150 x 100 mm (DIN 875/0) — Metav IndustryLine, hardened stainless steel The Inspection square 150 x 100 mm (DIN 875/0) serves as a compact, workshop-grade reference angle for fast and repeatable squareness checks in production and quality control. DIN 875/0 accuracy standard Hardened stainless steel construction Flat profile for close surface contact Built for dependable squareness in routine inspection The compact reference angle is engineered to provide repeatable squareness in everyday workshop and quality‑control tasks. With a 150 x 100 mm footprint the tool offers a practical balance between reach and rigidity, enabling stable contact without unwieldy handling. The DIN 875/0 standard specifies the tolerance class, so the instrument can be relied upon for comparative checks, set‑up operations and quick go/no‑go verification where a consistent right angle is required. Practical benefits for production and bench work A flat design supports intimate contact with workpieces and fixtures, reducing the gap caused by surface irregularities and allowing more consistent readings when paired with scribers, height gauges or reference faces. The piece functions as a fixed angle reference for alignment, marking and visual inspection, helping to speed up process control and minimise rework. Its compact format suits bench tasks and machine set‑ups where space is limited but accuracy cannot be compromised. Robust materials and manufacturing for longevity Constructed from hardened stainless steel, the square combines wear resistance with corrosion protection for long service life in mixed workshop environments. Hardening increases edge and face durability, preserving the reference surfaces under repeated use, while the stainless composition resists oxidation in routine production settings. The combination of these material properties reduces drift and ensures a stable reference over time, lowering the need for frequent replacement. Why this reference angle fits a professional toolkit As a standardised inspection instrument, this square supports efficient quality workflows by providing a quick, visible measure of squareness that complements micrometre‑level control devices. The design emphasises usability and traceability: standard tolerances mean results are comparable across tools and shifts, while a durable finish helps to maintain the reference geometry under continuous use. The result is a cost‑effective component of a precise and reliable inspection strategy. Choose the Metav IndustryLine inspection square for consistent right‑angle checks and contact Metav Werkzeuge in Emmerich for ordering or technical guidance. Technical data Article number: M214.305 GTIN: 4054469107967 eClass: 21170119 Dimensions & standard Dimensions: 150 x 100 mm Standard: DIN 875/0 Tariff code: 90178090 Materials & features Material: hardened stainless steel Design: flat profile Surface: INOX (corrosion resistant) Category: Angle / inspection square FAQ What accuracy class does this inspection square comply with? The inspection square meets the DIN 875/0 tolerance class and is intended for routine squareness checks and comparative measurement tasks. Can the square be used directly on machined reference surfaces? Yes, the hardened stainless steel faces are designed for direct contact with machined surfaces and provide a stable reference for alignment and marking. Is the inspection square suitable for workshop and production use? The compact 150 x 100 mm format and robust finish make it well suited to workshop and production environments where repeatable right‑angle checks are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150x100 mm Inspection Square Flat Stainless Hardened, DIN 875/1 - Metav IndustryLine
Take advantage of the combination of hardened stainless steel, a flat reference surface and conformity to DIN 875/1 for reliable inspection and layout work; order the inspection square directly via Metav Werkzeuge or consult our specialists for application advice. Inspection square 150 x 100 mm — hardened stainless steel, DIN 875/1 (Metav IndustryLine) The inspection square 150 x 100 mm is a compact, flat reference angle intended for precision layout and quality control in metalworking and workshop inspection tasks. *Hardened stainless steel construction *Compliant with DIN 875/1 standard *Flat geometry for stable contact Precision that holds up in the workshop A hardened stainless-steel reference angle provides a stable seating and minimal wear over time, which directly supports consistent accuracy in repeated checks. Conformance with DIN 875/1 means the geometry is produced to an accepted metrological standard, enabling clear comparability between inspections. This combination reduces measurement variation and helps maintain process control on the shop floor. Designed for reliable inspection and layout The compact 150 x 100 mm format offers an optimal balance between reach and rigidity: the shorter leg ensures a stiff contact edge while the longer leg provides sufficient reference length for common layout tasks. The flat reference surface facilitates secure seating against workpieces and fixtures, improving repeatability when transferring angles or verifying squareness in assemblies and set-ups. Durability and corrosion resistance for everyday use Manufactured from hardened stainless steel, the tool resists corrosion in workshop environments and keeps contact faces free from rapid degradation. The flat design minimises deformation under light handling and supports consistent measurement over time, reducing the need for frequent replacement and contributing to long-term operational reliability. Clear identification and integration into inspection routines The inspection square is supplied with traceable identifiers suitable for workshop inventories and quality documentation. Its compact size and robust construction make it convenient for routine inspections, fixture set-ups and incoming inspection processes, supporting efficient workflow integration and measurable quality outcomes. Contact Metav Werkzeuge in Emmerich for procurement or technical advice on the Metav IndustryLine inspection square and ensure the right reference tool for your measurement routines; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M214.325 GTIN: 4054469108100 Standard: DIN 875/1 EClass: 21170119 Dimensions and measurable data Size: 150 x 100 mm Materials and special features Material: hardened stainless steel Design: flat Category: inspection square Tariff code: 90178090 Brand: Metav IndustryLine FAQ What materials is the inspection square made from? The inspection square is manufactured from hardened stainless steel, providing corrosion resistance and durable contact faces for repeated shop use. Is the geometry produced to an established standard? Yes, the geometry complies with DIN 875/1, ensuring standardised squareness suitable for workshop inspection and layout tasks. For which workshop tasks is the 150 x 100 mm format most suitable? The 150 x 100 mm form factor is ideal for fixture set-up, small-assembly squareness checks and general layout work where a compact, stiff reference is required. How does the flat design benefit measurement repeatability? A flat contact surface improves seating against workpieces and fixtures, reducing slippage and enabling more repeatable angle and squareness checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150x100 mm Inspection Square Flat, DIN 875/2, 0.21 kg - Metav IndustryLine
Take advantage of DIN 875/2 accuracy, a flat design and robust mild steel construction for repeatable right-angle checks in production and inspection. Order the inspection square directly via Metav Werkzeuge or ask our consultants if needed. Inspection square M214.554 — DIN 875/2, 150 × 100 mm (Metav IndustryLine) The inspection square M214.554 is a compact precision gauge designed for routine right-angle verification and workshop layout tasks, combining a measured working area with an industrial accuracy class for dependable alignment checks. DIN 875/2 accuracy class Flat design for secure seating 150 x 100 mm measurement area Mild steel construction with finished faces Consistent metrology for assembly and inspection The square is specified to DIN 875/2, which defines tight dimensional tolerances for angle gauges and ensures consistent performance across repeat checks. In practice, this accuracy class supports quality control routines where small angular deviations can cause downstream assembly errors. The conformity to a recognised standard simplifies comparison between tools and helps maintain traceable inspection records; the square therefore serves as a reliable reference for jig checks and fixture alignment in everyday workshop workflows. Robust form and handling for workshop use A flat design delivers stable contact between the stock and the workpiece, reducing the chance of rocking during measurement and improving repeatability. Constructed from mild steel, the tool balances toughness with machinability, making it suitable for frequent handling and the occasional light bump typical in machine shops. The compact 150 × 100 mm format gives a useful reach while remaining easy to position on small components and in confined setups, so right-angle verification can be integrated into set-up and run-off procedures without additional handling complexity. Practical benefits that reduce rework Used for incoming inspection, setup verification and quick on-machine checks, this angle gauge speeds up decision-making by providing an immediate visual and tactile reference for squareness. The clear, machined edges assist in aligning parts and marking layout lines, which in turn reduces the likelihood of rework and scrap. For production environments that prioritise throughput and traceability, the combination of a recognised accuracy class and a stable geometry supports efficient quality assurance steps and helps maintain consistent product standards. Contact Metav Werkzeuge for specification advice or to order the Metav IndustryLine inspection square M214.554 from Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M214.554 GTIN: 4054469109183 ECLASS: 21170119 Customs tariff number: 90178090 Facts Dimensions: 150 x 100 mm Accuracy class: DIN 875/2 Special features Material: mild steel Flat design Category: Angle (Winkel) Label: Inspection square 150 x 100 mm, DIN 875/2 FAQ What tolerance is associated with this angle gauge? The inspection square M214.554 conforms to DIN 875/2, providing the defined tolerance band for class 2 right-angle gauges used in routine inspection and workshop set-ups. Is the square suitable for use during machine set-up and fixture checks? Yes, the compact 150 x 100 mm format and flat design make the gauge well suited to on-bench verification, assembly alignment and quick machine set-up tasks. Which material is the tool made from and what does that mean for durability? The Metav IndustryLine inspection square M214.554 is made from mild steel, offering a robust balance of toughness and handling resilience for regular workshop use. Does the product come with a calibration certificate? Product data does not specify a calibration certificate; if traceable calibration is required, arrange calibration through an accredited service prior to use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150x100 mm Inspection Square Flat, Stainless Hardened, DIN 875/2 - Metav IndustryLine
Benefit from a hardened, corrosion‑resistant construction combined with DIN 875/2 inspection accuracy to ensure reliable squareness checks and repeatable results. Order the inspection tool directly via Metav Werkzeuge or consult their specialists for application advice and fast supply. Control square 150 × 100 mm (DIN 875/2) — Metav IndustryLine inspection square, hardened stainless steel The Control square 150 × 100 mm (DIN 875/2) is a compact inspection tool designed for workshop and quality‑control tasks, suited to checking squareness and flatness on machined parts and assemblies. Flat low-profile design Accuracy class DIN 875/2 Hardened stainless steel construction Compact 150 × 100 mm footprint Precision that fits the workshop The Control square 150 × 100 mm (DIN 875/2) is engineered for dependable squareness checks. Compliance with DIN 875/2 denotes a defined inspection class for angle accuracy, which translates into reproducible results when verifying jigs, vices and mating faces. The compact 150 × 100 mm format delivers a balance of reach and rigidity, permitting quick verification without the handling difficulties of larger gauges. This makes the tool an efficient addition to routine quality checks and machine set‑ups, reducing inspection time while keeping measurement uncertainty low. Robust construction for daily use Constructed from hardened stainless steel, the square offers both wear resistance and corrosion protection for everyday workshop conditions. The flat profile minimises obstruction when aligning components and helps maintain contact across the measuring faces. Hardened steel surfaces resist edge deformation under light knocks and repeated use, preserving squareness over the long term. Together, these attributes lower the likelihood of rework and support consistent inspection results in production and maintenance environments. Practical applications and handling benefits This inspection square is ideal for verifying right angles on housings, checking aligning seats and assessing the perpendicularity of mating parts in assembly operations. The compact dimensions suit bench work and make the tool easy to store in a small tool drawer or transport in a case. As a straightforward, standards‑based instrument, it supports faster decision‑making on the shop floor: simple checks with a calibrated reference square can prevent cascading errors and contribute to overall process reliability. Choose the Metav IndustryLine control square for corrosion‑resistant, hardened accuracy—contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for specification advice and reliable supply from Emmerich. Technical data Article number: M214.365 GTIN: 4054469108438 Standard: DIN 875/2 Facts Dimensions: 150 × 100 mm eClass: 21170119 Tariff number: 90178090 Special features Material: hardened stainless steel Flat profile Category: inspection square (Winkel) FAQ What tolerance class does this inspection square meet? The Control square 150 × 100 mm (DIN 875/2) is manufactured to the requirements of DIN 875/2, providing a defined inspection class for squareness suitable for workshop and production checks. Is the square suitable for use in humid or corrosive environments? Yes, the Metav IndustryLine control square is made from hardened stainless steel, which offers improved corrosion resistance compared with untreated carbon steels and is appropriate for most workshop atmospheres. Can this square be used for alignment and set‑up tasks on machines? Yes, the compact 150 × 100 mm format and flat profile make the square well suited to alignment, set‑up and quick perpendicularity checks on machines and fixtures. How should the inspection square be stored to retain accuracy? Store the inspection square clean and dry, ideally in a protective sleeve or drawer away from heavy tools; avoid impacts on the measuring edges to preserve the hardened faces and maintain reliable squareness. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150x100 mm Machinist's Angle With Stop, Galvanised Special Steel - Metav IndustryLine
Take advantage of a corrosion‑resistant, zinc‑plated construction paired with a practical stop for repeatable right‑angle work; the compact 150 x 100 mm format keeps handling nimble while delivering workshop‑grade stability. Order the item directly via Metav Werkzeuge or consult our technical team for application advice. Machinist's square M214.524 — 150 x 100 mm zinc‑plated right‑angle tool by Metav IndustryLine Machinist's square M214.524 is a compact right‑angle gauge designed for durable layout and light assembly work, featuring a fixed stop and corrosion‑resistant finish for reliable everyday use 150 x 100 mm working faces Zinc‑plated special steel for corrosion resistance Integral stop for repeatable positioning Lightweight 0.3 kg for easy handling Precise right angles that speed up layout work The M214.524 is engineered to bring consistent squareness to workshop tasks where repeatability matters. The combination of accurately ground faces and an integral stop reduces the need for re‑alignment, which cuts layout time and minimises errors during marking or assembly. The compact 150 x 100 mm size balances reach and rigidity, making the tool suitable for frequent use on small to medium components without the bulk of long‑arm squares. Emphasis is on predictable results that assist efficient production flows. Built to resist workshop conditions and last A zinc‑plated finish over special steel provides a protective layer against humidity and coolant splash, extending the service life in mixed‑use environments. The corrosion protection helps retain surface quality, which in turn preserves the contact geometry that determines squareness. In practice, fewer surface irregularities mean measurements and layout marks remain trustworthy over time, reducing rework and parts rejection rates for everyday fabrication tasks. Practical design for repeatable marking and checking The incorporated stop allows rapid positioning against edges and workpieces, turning a simple right‑angle check into a repeatable operation. This feature is particularly useful where a series of identical parts require identical reference marks. The tool’s low mass (around 0.3 kg) keeps handling comfortable during extended periods of use, while the robust sectional profile prevents easy distortion under normal workshop pressures. Workshop compatibility and quality assurance Manufactured to a consistent works standard, this right‑angle tool fits seamlessly into general fabricating, maintenance and assembly workflows. Its straightforward geometry means compatibility with common jigs and fixtures, and the zinc finish minimises the risk of staining or contamination on sensitive surfaces. As a Metav IndustryLine product, the item supports dependable restocking and consistent quality control for procurement teams seeking to standardise their toolbox. Contact Metav Werkzeuge for procurement details and technical guidance on the Metav IndustryLine machinist's square M214.524 — call +49 2822 7131930 or email info@metav-werkzeuge.com for availability and delivery options Technical data Article number: M214.524 GTIN: 4054469109022 Weight: 0.3 kg Norm: Werksnorm Facts Working faces: 150 x 100 mm Tariff number: 90178090 Special features Material: special steel Coating: zinc‑plated Feature: with stop Category: Winkel Manufacturer: Metav IndustryLine FAQ What materials is this square suitable for checking? The machinist's square M214.524 is a general‑purpose right‑angle tool suitable for layout and checking on most workshop materials; the zinc‑plated special steel resists corrosion during regular use. Does the square include any alignment or positioning aid? Yes, the unit is supplied with an integral stop, permitting rapid and repeatable positioning for marking and inspection tasks. How robust is the surface finish in a production environment? The zinc‑plated surface is designed to withstand typical workshop conditions such as humidity and occasional coolant exposure, helping to preserve the measuring faces. Is the product delivered with a certificate or specific calibration? The item is produced to works standard; no external calibration certificate is supplied with this right‑angle tool unless otherwise specified in the order. Which organisation supplies and supports this product? The tool is part of the Metav IndustryLine range and can be sourced through Metav Werkzeuge; stock and supply are coordinated from the Emmerich facility Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150x100 mm Stop Angle With Stop, DIN 875/2 - Metav IndustryLine
Take advantage of a compact, standards-based square that combines precise alignment, a sturdy steel profile and an integrated stop for repeatable setups. Benefit from a straightforward workshop tool that supports fast layout and inspection tasks — order via Metav Werkzeuge or contact our consultants for application advice. Engineer's square 150 x 100 mm — DIN 875/2, Metav IndustryLine The Engineer's square 150 x 100 mm is a compact layout and inspection square designed for workshop use and routine dimensional checks, offering a practical balance of reach and handling for metalworking and fabrication tasks. Engineer's square 150 x 100 mm, DIN 875/2 Constructed from carbon steel With integrated stop for locating Robust workshop geometry for repeatability Precision tailored to everyday inspection and layout The square is produced to DIN 875/2, a recognised accuracy class for workshop squares that ensures trustworthy alignment for marking and inspection. Its 150 x 100 mm footprint provides a concise measuring face suitable for small- to medium-sized components, enabling rapid squaring of parts and fixtures. Emphasis is placed on consistent contact geometry so that measurements and marks remain comparable across repeated operations, supporting efficient quality routines on the shop floor. Repeatable set-ups thanks to the integrated stop An integrated stop simplifies positioning for repeated operations, reducing setup time when several identical parts require the same squaring. The stop provides a reliable datum that improves repeatability during layout, assembly and inspection cycles. In production contexts where throughput and reproducibility matter, this feature translates into fewer adjustments and quicker transitions between tasks, thereby supporting a smoother workflow and predictable results. Durable construction for sustained workshop use Manufactured from carbon steel, the square is built to withstand everyday handling in busy workshops. The profile and joint design favour a robust geometry that resists distortion under normal use, preserving the right-angle reference over time. The material choice and workmanship make the tool a practical companion for machinists, fitters and maintenance technicians who require a stable reference instrument that endures the demands of routine use. Practical applications across fabrication and quality control This square is suited to a variety of tasks including component marking, jig and fixture checking, and bench inspection. Its compact format is especially convenient where space is limited or where fast changeovers are needed; the device supports accurate visual and tactile alignment for welding preparation, assembly checks and bench layout. The combination of clear standards compliance and a locating function makes it a pragmatic choice for production lines and small workshops aiming for consistent workmanship. Contact Metav Werkzeuge for detailed application advice or to secure supply of the Metav IndustryLine square; our team in Emmerich can advise on integration into existing inspection workflows. Technical data Article number: M214.574 GTIN: 4054469109268 eCl@ss: 21170119 Tariff number: 90178090 Core dimensions Dimensions (L x H): 150 x 100 mm Standard: DIN 875/2 Material: carbon steel Special features With integrated stop Category: Winkel (square) Brand: Metav IndustryLine FAQ What does the DIN 875/2 designation mean for workshop use? DIN 875/2 denotes the square's accuracy class, making the Engineer's square 150 x 100 mm suitable for reliable layout and inspection tasks in a workshop environment. Can the square be used to speed up repetitive layout work? Yes, the integrated stop on the Engineer's square allows for quick and repeatable positioning, which aids repeatability and reduces setup time during batch work. Is the material suitable for everyday workshop conditions? The square is manufactured from carbon steel, a material selected to provide a durable profile and stable contact faces for routine workshop handling. Which tasks are most appropriate for this square? Typical applications include marking out, checking right angles on assemblies, verifying jig alignment and support tasks in fabrication and small-series inspection. Does the product come from a specialised supplier? This square is supplied under the Metav IndustryLine brand, intended for straightforward integration into industrial and craft inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150x100mm 45° Bevel Square Flat Normal Steel, DIN 875/2 - Metav IndustryLine
Taking the combination of 45° geometry, conformity to DIN 875/2 and a deliberately flat profile yields a dependable workshop square for repeatable angular inspection and layout work; its compact dimensions keep handling straightforward while maintaining production reliability. Order the 45° bevel square directly via Metav Werkzeuge or ask our consultants if needed. 45° Bevel Square M214.426 — Plain steel, DIN 875/2 The 45° Bevel Square M214.426 is a compact precision layout tool for angular checking and marking in metalworking and general workshop inspection. Precision 45° angle, DIN 875/2 Flat profile for secure contact Plain steel construction Without stop for compact handling Reliable angle control for routine inspection The tool has been designed for consistent angular measurement and layout, meeting the DIN 875/2 standard for precision squares. The machined 45° face provides a stable reference edge that supports both inspection and marking tasks; used as a control square it reduces set‑up time and helps avoid rework. The choice of plain steel gives predictable thermal and mechanical behaviour in a workshop environment, so alignment and scribing operations remain repeatable under normal conditions. Compact dimensions that aid handling and versatility With a blade and body geometry of 150 x 100 mm, the unit combines reach with handable proportions for bench and on‑machine use. The flat profile ensures broad contact when squaring components or checking interfaces, while the absence of a fixed stop keeps the square suitable for recessed or awkward positions. The form factor supports quick placement and visual inspection without the bulk of larger layout squares, making it a practical everyday instrument for machinists and fitters. Durable construction for long service life Manufactured from plain steel and finished for workshop use, the square tolerates standard handling and cleaning routines; routine maintenance is limited to keeping contact faces free from debris and corrosion. The robust design maintains edge integrity for extended periods, which preserves the tool’s measuring function and reduces replacement frequency. As part of a disciplined measurement routine, this instrument contributes to consistent part conformity and smoother production flow. Contact Metav Werkzeuge today for procurement advice and to secure this Metav IndustryLine 45° bevel square for precise angular checking in the workshop Technical data Article number: M214.426 GTIN: 4054469108704 Standard: DIN 875/2 Facts Dimensions: 150 x 100 mm ECLASS: 21170119 Tariff code: 90178090 Special features 45° bevel angle Without stop Flat profile Material: plain steel Brand: Metav IndustryLine FAQ What level of accuracy does the 45° bevel square offer? The 45° Bevel Square M214.426 is manufactured to the tolerances associated with DIN 875/2, providing a level of accuracy appropriate for general workshop inspection and layout tasks. Is this square suitable for use on machined faces and layout benches? Yes, the flat profile and machined faces of the M214.426 make it suitable for checking machined surfaces and for transfer‑marking on layout benches in metalworking environments. How should the square be maintained to preserve accuracy? Keep the contact faces clean and free from burrs or corrosion; light corrosion can be removed and a thin protective oil film applied. Regular visual inspection of the edges will help ensure continued reliability of the M214.426. Can the square be used for marking internal angles or recessed features? The absence of a fixed stop and the compact form factor allow the square to be used in confined or recessed areas where larger squares would be impractical. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150x100mm Carpenter Square With Spirit Level And 23x10mm Stop - Metav IndustryLine
Take advantage of the combination of a lightweight aluminium body, an integrated spirit level and a clear mm scale for fast, repeatable right-angle checks on workshop components; order the carpenter's square directly via Metav Werkzeuge or contact our consultants for application advice. Metav IndustryLine Carpenter's Square M203.010 – Aluminium, 150 x 100 mm with spirit level The Metav IndustryLine Carpenter's Square M203.010 is a compact aluminium try square with an integrated spirit level, intended for precise 90° checks and layout tasks in woodworking and general workshop use Aluminium construction Integrated spirit level Metric mm scale Compact 150 x 100 mm size Reliable geometry for everyday layout and checking A compact layout tool built from aluminium provides a stable reference for routine work such as marking edges, squaring panels and checking fixture alignment. The 150 x 100 mm face delivers a practical reach for trims, joinery and small assemblies while remaining easy to handle. The visible mm scale enables quick dimensional checks without switching tools, reducing setup time and supporting a continuous workflow. The integrated spirit level adds a second verification axis so that both angle and horizontality can be confirmed with the same instrument, improving efficiency on repetitive tasks. Practical design that suits busy workshops The lightweight construction (approx. 0.1 kg) lowers fatigue during extended use and allows rapid repositioning across benches or ladders. A modest 23 x 10 mm stop provides a consistent contact area for secure seating against edges and faces, reducing play during layout. The tool’s simple geometry means it is inherently serviceable and easy to clean, making it suitable for carpentry, cabinetmaking and general maintenance where straightforward, dependable measuring aids are required. This practical form factor supports both quick spot checks and deliberate inspection routines. Measurable benefits and user-centred advantages Having a single tool that combines a clear metric scale, a stable aluminium body and a readable spirit level reduces tool changes and shortens cycle time on small to medium tasks. The combination promotes reproducible results: the rigid profile minimises bending under light pressure, while the integrated level enables immediate verification of horizontal planes. For workshops seeking predictable layout results without specialist metrology equipment, this square offers a cost-effective compromise between portability and functional precision. For reliable workshop layout and simple quality checks, choose the Metav IndustryLine carpenter's square M203.010 — contact Metav Werkzeuge in Emmerich for procurement or application guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M203.010 GTIN: 4054469102429 Manufacturer: Metav IndustryLine Facts Dimensions: 150 x 100 mm Stop dimensions: 23 x 10 mm Weight: 0.1 kg Special features Material: Aluminium Metric mm scale Integrated spirit level Category: Winkel FAQ What materials is the product made from? The Metav IndustryLine carpenter's square M203.010 is manufactured from aluminium, offering a balance of stiffness and low weight. Is the square suitable for carpentry and general workshop tasks? Yes, the carpenter's square M203.010 is intended for woodworking, joinery and general workshop layout where compact, repeatable 90° checks are needed. Does the tool include a measuring scale and spirit level? The instrument features a clear mm scale and an integrated spirit level for combined angle and horizontal checks. What are the exact dimensions and weight of the square? The face size is 150 x 100 mm, the stop measures 23 x 10 mm and the tool weighs approximately 0.1 kg. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150x100mm Miter Square 135° With Stop, Carbon Steel, DIN 875/2 - Metav IndustryLine
Take advantage of the combination of DIN 875/2 accuracy, compact 150 x 100 mm format and an integrated stop for efficient, repeatable marking — order the Mitre Square directly via Metav Werkzeuge or consult our specialists for application advice. Mitre Square 135° — Angle measuring square, 150 x 100 mm (Metav IndustryLine) The Mitre Square 135° is a workshop angle gauge for checking and marking 135° cuts and joints; designed for metalworking and general fabrication where a compact, robust measuring tool is required. 135° angle measurement DIN 875/2 accuracy class Integrated stop for repeatable marking Robust mild steel construction Accuracy that speeds up inspection and marking A 135° angle gauge in DIN 875/2 quality provides a clearly defined tolerance class for angle tools, which translates to predictable, comparable results during part inspection and layout work. The compact 150 x 100 mm geometry gives a favourable ratio between reach and rigidity, reducing the chance of twist during use and improving repeatability. With the square manufactured from mild steel and finished for a stable reference edge, machinists and fitters gain reliable alignment for both hand marking and bench checks; the normative reference ensures the tool fits into documented quality routines and inspection plans. Built-in stop for consistent setups and faster throughput The integrated stop allows rapid repositioning and positive locating against workpieces, eliminating the need for temporary clamps in many repetitive operations. This practical detail reduces set-up time and helps maintain the same datum for a series of parts, which is especially useful in short-run production or jig work. The tool’s low mass (approximately 0.3 kg) and compact profile make it easy to handle while providing enough mass to sit steadily on a bench, combining portability with operational stability for everyday shop use. Suited applications and practical care advice This angle square is tailored to metalworking, fitting and general fabrication tasks where a 135° reference is required: trimming mitred joints, checking weld preparations and aligning small assemblies. The mild steel construction offers strength for workshop use but benefits from routine care — keep the reference faces clean and lightly oiled to avoid corrosion and to preserve the accuracy of the measuring edges. When integrated into inspection routines, this square complements standard layout tools and supports consistent workmanship in production and repair environments. Specify the Metav IndustryLine Mitre Square M214.406 for DIN 875/2-class angle control — contact Metav Werkzeuge in Emmerich for order and supply guidance Technical data Article number: M214.406 GTIN: 4054469108599 eClass: 21170138 Category: Angle (Winkel) Manufacturer: Metav IndustryLine Facts Dimensions: 150 x 100 mm Weight: 0.3 kg Tariff number: 90178090 Standard: DIN 875/2 Special features 135° angle With stop (integrated Anschlag) Material: mild steel Designed for marking and inspection FAQ What tolerance class does the square meet? The tool meets the DIN 875/2 tolerance class, which defines the geometric accuracy expected from workshop squares and supports reliable inspection routines. Is this gauge suitable for repeated marking tasks? Yes — the integrated stop and compact design make the square well suited for repeatable set-ups and series marking in fabrication tasks. Which materials is the square intended for? Constructed from mild steel, the Mitre Square is intended for metalworking and general workshop use; it is robust enough for frequent handling but benefits from corrosion prevention. How portable is the tool for on-site or bench use? At approximately 0.3 kg and a 150 x 100 mm format, the gauge is lightweight and easy to carry between workstations while retaining a stable reference edge for bench operations. What is the product reference for ordering? Orderers can refer to the item by its article number M214.406 and the Metav IndustryLine designation to ensure the correct 135° mitre square is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150x100mm Point Angle 45° Adjustable Stop Steel, DIN 875/2 - Metav IndustryLine
Take advantage of a true workshop layout tool that combines DIN 875/2 conformity, a compact 150 x 100 mm footprint and a built‑in stop for repeatable 45° checks; order directly via Metav Werkzeuge or consult the Metav team for specification advice. 45° precision bevel square M214.436 — 150 x 100 mm, mild steel (Metav IndustryLine) The 45° precision bevel square M214.436 is a compact layout and inspection instrument designed for workshop and metalworking tasks where a certified 45° reference and a fixed stop are required. Accuracy to DIN 875/2 standard Robust mild steel construction Compact size 150 x 100 mm with stop Repeatable 45° reference for everyday workshop accuracy The beveled square provides a stable, certified 45° datum that supports precise marking and assembly tasks. Built to the DIN 875/2 specification, this angle plate ensures a reliable reference for repetitive checks and quick visual inspections. Using a hardened edge profile in mild steel yields a consistent right‑angle face that resists deformation under normal workshop loads, so layout and checking operations remain repeatable across shifts. This combination of standard conformity and robust material reduces the need for recalibration between routine uses and helps maintain production flow. Practical design for efficient handling and operation With a 150 x 100 mm body and a fitted stop, the instrument is optimised for single‑handed layout tasks and small assembly stations. The compact form factor keeps the tool rigid while allowing access to tight fixtures and components; the integrated stop simplifies alignment, saving set‑up time when placing the square against workpieces or assembly jigs. At roughly 0.3 kg, the square balances mass for stability with portability for use across benches and machines, supporting efficient workflow in metal fabrication and finishing areas. Clear benefits for shopfloor productivity The engraved angle and the fixed stop support faster, consistent marking and clamping, which in turn reduces rework and inspection time. As a mechanical reference tool, the bevel square requires no power source and provides immediate feedback during layout, cutting preparation and quality checks. The straightforward design means minimal training is needed for operatives to achieve dependable results, contributing to reduced cycle times and improved first‑pass yields in routine production tasks. Longevity, care and procurement confidence Constructed from mild steel and finished for workshop use, the square is robust under standard conditions; occasional light oiling and storage in a dry area will preserve the measuring faces. Procurement through a trusted partner ensures traceability and stock reliability: Metav IndustryLine’s distribution from Emmerich provides a quality filter for the European market and dependable availability for maintenance of toolsets and inspection benches. For facilities that value steady supply and clear specifications, this angle square is a practical addition to a metrology kit. For tailored advice on integrating the 45° precision bevel square M214.436 into existing inspection routines or to request delivery from Metav Werkzeuge, contact Metav Werkzeuge for specification support and supply from Emmerich. Technical Data Article number: M214.436 GTIN: 4054469108766 Tariff number: 90178090 Brand: Metav IndustryLine Data Dimensions: 150 x 100 mm Angle: 45° Weight: 0.3 kg Standard: DIN 875/2 Special features Material: mild steel With stop for repeatable alignment Category: angle / bevel square Suitable for workshop layout and inspection FAQ What accuracy standard does this angle comply with? The instrument conforms to DIN 875/2, providing a standard workshop reference for 45° checks and layout tasks. Which material is used for the square? The bevel square is manufactured from mild steel, chosen for its robustness and stable reference faces. Is a stop included and how does it help? Yes, the built‑in stop enables repeatable placement against edges and fixtures, improving alignment speed and consistency for the M214.436 bevel square. What are the main workshop applications for this tool? Typical uses include marking, assembly alignment, visual inspection and jig set‑up where a reliable 45° datum is required. How should the tool be maintained? Keep the faces clean and dry, apply light protective oil as required and store in a dry location to prevent corrosion and preserve measurement integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150x150mm Eight-Sided 135° Square, Plain Steel, Without Stop, DIN 875/2 - Metav IndustryLine
The combination of a compact 150 x 150 mm working face, a precise 135° geometry and robust mild steel construction delivers dependable angle checks and durable shop-floor performance; order the item via Metav Werkzeuge or contact the sales team for application advice. Metav IndustryLine Octagonal Angle 135°, 150 x 150 mm – Measuring Angle The Octagonal Angle 135° 150 x 150 mm is a compact measuring angle for layout, inspection and alignment tasks in workshops and production environments. 135° octagonal geometry for specialised angle checks 150 x 150 mm size for compact yet rigid handling Mild steel construction suited to everyday workshop use Compliant with DIN 875/2 for standardised angle inspection Reliable geometry for consistent angle inspection The octagonal measuring device features a defined 135° angle manufactured to the tolerances associated with DIN 875/2, providing a measurable basis for routine checks and set-ups. Compliance with this standard means the tool is suitable for verification tasks where repeatable angular references are required; the geometry supports inspection of machined components, fixturing and welded assemblies. As a simple, non-powered instrument, it delivers immediate, objective information about component geometry that integrates well with existing quality workflows. Built for practical shop-floor use and endurance With a compact footprint of 150 x 150 mm and an octagonal cross-section, the tool balances reach and stiffness for everyday handling. The mild steel body offers mechanical robustness against knocks and handling typical in production areas while remaining straightforward to store and transport. The design omits a fixed stop (delivered without stop) to allow free positioning against workpieces where a shoulder would restrict access; this feature benefits layout work and inspection of uneven or profiled surfaces. The result is a versatile, durable instrument that reduces set-up time and withstands regular use. Clear benefits for layout, inspection and assembly The instrument excels where compact, repeatable angle references are needed: marking out non-standard joints, checking tapered or chamfered features and aligning fixtures on jigs and machines. Its simple geometry reduces reliance on temporary aids and speeds up pass/fail decisions in production control. The lack of electronic parts or consumables means minimal maintenance and immediate readiness. Backed by Metav’s emphasis on dependable supply and application support, the tool integrates into workshop routines and contributes to higher process reliability. For robust, standards-based angle checks, ask Metav Werkzeuge for tailored advice or to arrange procurement directly via Metav Werkzeuge. Technical Data Article number: M214.415 SKU: M214.415 GTIN: 4054469108667 Customs tariff number: 90178090 Facts Angle: 135° Dimensions: 150 x 150 mm Standard: DIN 875/2 Special features Material: mild steel Geometry: octagonal cross-section Delivery: without stop Category: angle / measuring square FAQ What accuracy standard does this measuring angle follow? The octagonal measuring angle is manufactured to the specifications of DIN 875/2, so the product meets the expectations for standardised angle inspection used in workshop and production environments. Is the angle suitable for layout on welded assemblies and fixtures? Yes, the Octagonal Angle 135° 150 x 150 mm is well suited to marking out and checking welded assemblies, fixtures and machined parts where a compact, rigid reference is required. What is the material and how does it cope with shop-floor conditions? Constructed from mild steel, the tool offers robustness for everyday workshop handling and resists typical wear from mechanical contact; routine cleaning prevents corrosion in humid environments. Does the tool include a stop for repeatable positioning? The instrument is supplied without stop, allowing flexible placement on profiled or irregular surfaces where a fixed shoulder would be restrictive. Can this angle be used for inspection in a quality-control workflow? Yes, the angle’s compliance with DIN 875/2 makes it suitable as a reference instrument within standard quality-control procedures and for shop-floor inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160x100x20 mm Granite Square 90° Grade 0, DIN 875/0 - Metav IndustryLine
Take advantage of the combination of Grade 0 accuracy, a stable granite body and a compact footprint for reliable angle inspection; order directly via Metav Werkzeuge or consult our specialists for application support. Granite square M214.605 — Grade 0 90° inspection square, 160×100×20 mm (Metav IndustryLine) The Granite square M214.605 is a precision reference for controlled 90° checks on spindles and machined parts, designed for the workshop and toolroom environment. Grade 0 accuracy to DIN 875/0 Robust granite body for thermal stability Precision-ground 90° reference faces Compact 160×100×20 mm footprint Reliable 90° reference for workshop inspection The granite construction combined with Grade 0 classification (to DIN 875/0) provides a stable, wear‑resistant reference for angular inspection. With its 90° reference faces manufactured to precise tolerances, the square supports repeatable alignment and verification of machine spindles and workpieces. The compact 160×100×20 mm size keeps the instrument manageable on a bench while still offering sufficient bearing area for accurate contact. Built for thermal and dimensional stability Granite naturally damps temperature fluctuations and resists deformation under normal workshop conditions; this delivers thermal stability that steel alternatives find hard to match. The precision‑ground faces maintain flatness and right‑angle integrity over repeated use, reducing setup time and the need for adjustment. As a result, inspection cycles become more efficient and the risk of costly rework is reduced through consistent, measurable references. Practical handling for routine quality control The small footprint and sensible mass make this square straightforward to position on inspection plates or machine beds. Its precision-ground bearing surfaces simplify contact alignment and speed up checks without compromising accuracy. Maintenance is minimal: simple cleaning and storage preserve the reference faces, so downtime for upkeep is kept to a minimum and toolroom throughput remains high. Proven partner reliability and workshop support Offered under the Metav IndustryLine, this reference square benefits from Metav’s longstanding role in making precision accessible. Metav’s supply chain and quality filter in Emmerich support dependable availability and traceable product standards, reinforcing workshop confidence in routine measurement. The combination of practical design and trusted distribution supports a consistent production workflow. For verified workshop accuracy with a Grade 0 reference, contact Metav Werkzeuge in Emmerich to discuss availability of the M214.605 inspection square and application advice Technical Data Article number: M214.605 GTIN: 4054469109411 Material: Granite Standard: DIN 875/0 Category: Measurement devices / Squares eClass: 21170119 Facts Dimensions: 160×100×20 mm Angle: 90° Precision class: Grade 0 Tariff number: 68022300 Special features Precision-ground reference faces Granite body for thermal damping Designed for spindle and workpiece angle checks Compact design for bench and toolroom inspection FAQ What tolerance class does this inspection square meet? The M214.605 is manufactured to Grade 0 tolerance in accordance with DIN 875/0, providing a high‑precision 90° reference for workshop inspection. Can the square be used to check machine spindles directly? Yes — the granite body and precision‑ground faces of the M214.605 make it suitable for direct checks of spindle alignment and for verifying right angles on machined components. How should the granite square be cared for to maintain accuracy? Regular cleaning of the reference faces and dry storage are recommended; avoid exposure to cutting fluids and heavy impacts to preserve the ground surfaces and long‑term stability. What advantages does granite offer compared with steel squares? Granite provides superior thermal damping and corrosion resistance, resulting in improved repeatability and reduced need for adjustment in typical workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
185mm Rafter Square With Adjustable Stop For Marking Rafters And Angles, Black Anodised Aluminium - Metav IndustryLine
Take advantage of a compact, corrosion-resistant layout tool that combines a black anodised aluminium body with an adjustable stop for repeatable angle and rafter marking; its 185 mm length and 0.2 kg weight support fast, portable use on site. Order directly via Metav Werkzeuge or consult the advisors for application-specific guidance. Adjustable aluminium rafter square M203.043 — black anodised, adjustable stop The Adjustable aluminium rafter square M203.043 is a compact layout tool for marking angles and rafters on timber and sheet materials, designed for carpenters, joiners and site work. Adjustable stop for repeatable layout Black anodised aluminium construction Compact 185 mm length for portability Suitable for angles 0–90° and rafter marking Durable, lightweight construction that speeds routine marking The body is made from black anodised aluminium, which offers a good balance of rigidity and corrosion resistance while keeping the tool lightweight at around 0.2 kg. This reduces fatigue when moving between workpieces and makes the tool simple to carry in a pocket or small kit. The low mass does not compromise stiffness for short-span layout tasks; the compact form is especially suited to tight spaces where larger squares are cumbersome. For repetitive marking jobs, the combination of material and design contributes to faster, more ergonomic working cycles and fewer measurement interruptions. Repeatable, adjustable stop for precise angle and rafter layout An adjustable stop with a contact face of 22 x 4.7 mm provides a defined datum for repetitive marks. The stop is engineered to hold a set position so that identical cuts and scribe lines can be transferred quickly across multiple members. The tool covers angle marking from 0–90° and rafter marking increments typically used in roof carpentry, which supports consistent joinery and reduces rework. In practice, the adjustable stop transforms a simple square into a small production jig for batches of identical rafters or bevels, saving time on layout and helping to maintain uniformity across assemblies. Practical features for carpentry, joinery and site use The square is configured for direct layout of mm dimensions and includes markings and geometry suitable for Gratsparren and common rafter profiles (marking range 1–30). Its compact 185 mm overall length makes it easy to manoeuvre in confined work areas, and the tool’s straightforward handling suits both seasoned tradespeople and apprentices. The black anodised finish not only resists wear but also reduces surface glare under strong site lighting, improving visibility of scribed lines. This tool is a pragmatic choice where quick, repeatable layout beats the need for larger drafting squares. For reliable rafter marking and professional layout solutions contact Metav Werkzeuge in Emmerich for tailored advice and supply — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M203.043 GTIN: 4054469183312 Manufacturer: Metav IndustryLine Facts Total length: 185 mm Weight: 0.2 kg Stop contact: 22 x 4.7 mm Angle range: 0–90° Rafter marking range: 1–30 Features Material: Aluminium, black anodised Adjustable stop for repeatable marks Compact, portable design Suitable for mm marking and rafter layout FAQ Is this square suitable for on-site rafter layout? The adjustable aluminium rafter square M203.043 is designed for on-site rafter and angle marking and is compact enough for everyday site use. How does the adjustable stop improve workflow? The adjustable stop on the M203.043 locks a datum position so identical marks can be made quickly, reducing setup time for repetitive cuts. What materials is the tool intended for? The tool is intended primarily for timber and sheet materials used in carpentry; the aluminium construction aids portability without compromising short-span stiffness. What are the key dimensions and weight of the tool? The square measures 185 mm overall and weighs approximately 0.2 kg, making it practical for handheld layout tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
185mm Rafter Square With Stop For Angle And Rafter Marking, Black Anodised Aluminium - Metav IndustryLine
Compact, repeatable marking and a corrosion‑resistant finish make this rafter square a practical choice for timber work; the 185 mm aluminium body and integrated stop deliver fast, consistent angle and rafter layout. Order directly via Metav Werkzeuge or contact our advisers for specification advice. Rafter square in aluminium with stop, 185 mm (M203.041) — Metav IndustryLine A robust Rafter square in aluminium with stop, 185 mm designed for marking angles, birdsmouths and rafter layouts in carpentry and timber framing Compact 185 mm length for tight spaces Black anodised for wear resistance Integrated stop for repeatable marking Precise angle marking 0–90° and rafter layout Mark angles faster with repeatable accuracy The compact design focuses on practical efficiency: a short, rigid body enables accurate scribing and reduces play when transferring angles from layout to timber. The integrated stop supplies a fixed reference, enabling repeatable marking of birdsmouths and rafter tails without re‑measuring. For routine roof layout tasks this reduces cycle time and minimises marking errors, so fewer adjustments are needed at the bench and on the roof — a direct productivity gain for busy workshops and site teams. Built to withstand daily use while staying light to carry Manufactured from black anodised aluminium, the instrument combines surface durability with low weight, easing handling on ladders and scaffolding. At approximately 0.2 kg the tool is easy to carry in a tool belt yet rigid enough for clear scribe lines. The corrosion‑resistant finish keeps edges true and readable over prolonged use, so the workshop benefits from a consistent, long‑lasting layout aid rather than a frequently replaced consumable. Practical features tailored to carpentry applications The tool covers the full 0–90° marking range and is suitable for laying out hip and common rafters (1–30) and standard millimetre markings, helping to bridge the gap between quick site marking and precise workshop layout. The stop dimension of 22 x 4.7 mm gives a secure locating face for repetitive scribing; the compact 185 mm length is especially useful where larger squares are unwieldy. If bespoke marking patterns or additional verification are required, the instrument works well alongside calipers and layout gauges to integrate into existing workflow. Choose the Metav IndustryLine rafter square for reliable, repeatable marking and contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M203.041 GTIN: 4054469183305 ECLASS: 21170119 Label: Rafter square in aluminium with stop, 185 mm for marking angles and rafters Numbers / Core technical data Length: 185 mm Weight: 0.2 kg Stop dimensions: 22 x 4.7 mm Angle range: 0–90° Designs / Special features Material: Aluminium, black anodised finish Suitable for marking millimetres, angle layout, birdsmouths and rafter tails Compact format for confined work areas Integrated stop for repeatable scribing FAQ Which tasks is this square best suited for? The rafter square in aluminium with stop, 185 mm (Metav IndustryLine, M203.041) is intended for timber framing tasks such as angle marking, birdsmouth layout and routine rafter marking where a compact, repeatable reference is beneficial. Is the finish suitable for outdoor site use? Yes — the black anodised surface provides enhanced resistance to wear and corrosion, so the measuring faces remain legible after regular on‑site use. Can the tool be used for both hip and common rafters? The design supports layout for hip and common rafters (1–30) and supplies a fixed stop that simplifies repeated scribing of identical elements. How does the integrated stop improve workflow? By providing a fixed locating face (22 x 4.7 mm), the stop reduces the need to re‑measure reference points, enabling faster, more consistent marking across multiple parts. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 x 130 mm Carpenter's Square Flat Galvanised, Steel - Metav IndustryLine
Take advantage of the combination of durable flat galvanised protection, precise 200 x 130 mm reference faces and lightweight handling to keep layout and marking work efficient and consistent; order via Metav Werkzeuge or consult the technical team for application advice. Locksmith's square M214.505 – Flat galvanised steel angle, 200 x 130 mm (Metav IndustryLine) The Locksmith's square M214.505 is a flat, galvanised angle gauge for routine squaring, marking and alignment tasks in metalworking and general workshop use. *Flat galvanised finish *Special steel construction *200 x 130 mm measurement face *Lightweight 0.3 kg for easy handling Reliable reference for everyday layout The flat, right-angled faces provide a consistent datum for marking and checking assemblies, making the tool a dependable choice where reproducible squaring is required. The 200 x 130 mm dimensions balance reach and stiffness: the longer blade extends marking range while the compact stock retains rigidity for repeatable results. A clear advantage in production and repair work is the reduced need for secondary checks, which supports more efficient workflows and fewer reworks. The flat galvanised finish adds a protective layer that helps maintain the reference faces in workshop environments. Built for durability and low maintenance Constructed from special steel and finished with galvanisation, this angle combines mechanical strength with corrosion resistance for a long service life in routine shop use. The flat design minimises catching on fixtures and allows neat storage in tool trays or on shelving, reducing the risk of damage between tasks. At approximately 0.3 kg, the square is light enough for single‑handed handling during marking operations while remaining substantial enough to give tactile control when aligning edges. These attributes result in lower lifetime maintenance and dependable performance on the shop floor. Practical integration into metalworking workflows The straightforward geometry and factory standard manufacturing of this angle make it suitable for layout, simple squaring, and quick visual checks on workpieces, jigs and welded assemblies. The robust finish reduces surface corrosion that can compromise reference lines, and the compact footprint supports use at the bench or on larger components where larger squares are impractical. For procurement and inventory control the item is identified as SKU M214.505, facilitating straightforward replenishment and traceability within production systems. The combination of practical design and durable coating supports steady productivity in machine shops, maintenance departments and fabrication environments. For corrosion-resistant, dependable squaring select the Metav IndustryLine Locksmith's square M214.505 — contact Metav Werkzeuge in Emmerich for application guidance and assured supply. Technical data Article number: M214.505 GTIN: 4054469108926 SKU: M214.505 Tariff number: 90178090 Facts Dimensions: 200 x 130 mm Weight: 0.3 kg eClass: 21170129 Special features Material: Special steel, galvanised Finish: Flat, galvanised Category: Angle (measuring instrument) Manufacturing standard: Werksnorm FAQ What is the primary use of this angle? The locksmith's square M214.505 is intended for squaring, marking and alignment tasks in metalworking and general workshop applications. What are the material and surface treatment? Made from special steel with a flat galvanised finish, the square offers mechanical strength and improved resistance to corrosion. How large are the measuring faces? The product provides a 200 x 130 mm reference face, combining reach and rigidity for routine layout work. Is the tool suitable for heavy fabrication environments? The galvanised surface and solid construction make the M214.505 suitable for routine fabrication and maintenance tasks; for extreme industrial conditions, complementary inspection practices are recommended. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 x 130 mm Hair Square Flat Hardened Bevelled Edge, Stainless Steel, Supplied in Case - Metav IndustryLine
Take advantage of DIN 875 Grade 00 accuracy and a hardened measuring edge finished in matt chrome for reliable layout and inspection. The compact 200 × 130 mm format combines stiffness with reach for everyday workshop tasks. Order the hairline square directly via Metav Werkzeuge or ask our consultants if needed. Hairline square 200 x 130 mm (Grade 00 DIN 875) — stainless, hardened edge — Metav IndustryLine A Hairline square 200 x 130 mm designed for precision layout and squareness checks in metalworking, toolmaking and quality inspection. Grade 00 accuracy DIN 875 Hardened measuring edge, matt chrome finish Corrosion‑resistant stainless steel Compact 200 × 130 mm format Faster, traceable inspection with Grade 00 precision The Grade 00 conformity to DIN 875 guarantees a reproducible reference angle for acceptance testing and setup tasks. Thanks to the hardened measuring edge, wear is minimised and the reference remains stable over repeated use, which reduces rework and downtime. This level of geometric certainty supports efficient quality control routines and makes the tool suitable for bench checks in machine shops and for toolmakers who require a reliable 90° reference. Durable finish that protects dimensional integrity A matt‑chrome plating over stainless steel provides both a neutral surface for marking and a degree of corrosion resistance that preserves measurement performance in humid workshop environments. The flat profile improves contact stability against workpieces, reducing tilt and ensuring a clean hairline alignment when scribing. The robust construction therefore contributes to long service life and consistent results, lowering lifecycle cost through reduced replacement frequency. Practical handling and workshop benefits With a compact 200 × 130 mm footprint the square is easy to handle on jigs, fixtures and moderate‑sized assemblies while still offering sufficient reach for most layout tasks. The flat geometry aids clamping and visual alignment, and the light but rigid design simplifies use during repetitive inspections. For tasks that demand a dependable right angle and clear scribe guidance, this hairline square is a practical addition to standard inspection sets and job benches. Choose the Metav IndustryLine hairline square for dependable Grade 00 reference and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and supply options Technical data Article number: M214.006 GTIN: 4054469106014 ECLASS: 21170127 Standard: DIN 875/00 Dimensions: 200 x 130 mm Material: stainless steel, matt chrome-plated, hardened measuring edge Facts Measuring dimensions: 200 x 130 mm Tariff number: 90178090 Special features Grade 00 accuracy (DIN 875) Hardened measuring edge Flat profile Corrosion-resistant stainless steel Matt chrome finish Category: Angle (Winkel) Product type: Hairline square FAQ What level of accuracy does this square provide? The hairline square delivers Grade 00 accuracy in accordance with DIN 875, offering a reproducible 90° reference suitable for demanding workshop inspections. Which materials is the square made from and how does that affect durability? Constructed from stainless steel with a matt chrome finish and a hardened measuring edge, the square resists corrosion and wear, keeping reference surfaces stable over time. Is the 200 × 130 mm format suitable for toolmaking and assembly checks? Yes, the compact 200 × 130 mm format balances reach and stiffness, making the square well suited to toolmaking, fixture checks and bench‑top assembly tasks. How should the hairline square be stored to preserve accuracy? Store the square clean and dry, preferably in a protective sleeve or box when not in use to avoid knocks to the hardened edge and to maintain the matt chrome surface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 x 130 mm Inspection Square Flat, DIN 875/1, Carbon Steel - Metav IndustryLine
Take advantage of the combination of DIN 875/1 accuracy, a rigid 200 x 130 mm working area and a flat, stable profile for repeatable right-angle checks; order directly via Metav Werkzeuge or consult our specialists for application advice. Inspection square M214.346 – DIN 875/1 accuracy, 200 x 130 mm The Inspection square M214.346 is a compact, DIN 875/1‑compliant right‑angle gauge designed for workshop inspection, setup and quality control tasks Inspection square M214.346 by Metav IndustryLine DIN 875/1 standard for right-angle accuracy Robust standard carbon steel construction Flat profile for stable contact and alignment Precision where it counts The square is manufactured to DIN 875/1, which ensures a defined tolerance for right‑angle accuracy and makes it suitable for routine verification and reference tasks in the metalworking shop. The standardised tolerance delivers a measurable basis for fixture alignment and machine setup, reducing rework and downtime. With its right‑angle reference and flat contact face, the tool provides a reliable datum for squareness checks and comparative measurement, making inspection faster and more reproducible. Robust construction for everyday use Constructed from standard carbon steel, the gauge offers durability and tactile stability during handling and measurement. The flat profile provides consistent contact across the measured surface, which helps maintain alignment when checking edges, faces or assemblies. This combination of material and geometry yields a tool that resists deformation under normal workshop use and stands up to repeated contact with machined parts, supporting dependable inspection routines and longer service life. Practical dimensions and workshop benefits With a working size of 200 x 130 mm, the square balances reach and manoeuvrability for benches and machine tools alike. The compact footprint is ideal for routine checks of smaller components while still offering sufficient leg length for set‑up tasks. Compliance with DIN 875/1 means the calibration basis is clear and compatible with standard inspection procedures, enabling straightforward documentation in quality records and audit trails. The compact, flat design also simplifies storage and handling between uses. For reliable right‑angle verification and workshop integration, contact Metav Werkzeuge to discuss availability and technical suitability for the inspection square M214.346 Technical data Article number: M214.346 GTIN: 4054469108285 eClass: 21170119 Norm: DIN 875/1 Manufacturer: Metav IndustryLine Tariff number: 90178090 Core specifications Dimensions: 200 x 130 mm Label: Kontrollwinkel 200 x 130 mm, DIN 875/1 Weight: see product label Features and materials Material: Normalstahl (standard carbon steel) Profile: flat Intended use: right‑angle inspection, setup, quality control FAQ What level of accuracy does this square provide? The inspection square M214.346 is manufactured to DIN 875/1, providing a defined tolerance class for right‑angle accuracy suitable for standard workshop inspection tasks. Can the square be used for machine setup and fixture alignment? Yes, the flat profile and rigid construction make the Metav IndustryLine inspection square suitable for machine setup, fixture alignment and comparative squareness checks. What are the dimensions and handling advantages? The working size of 200 x 130 mm offers a practical balance between reach and manoeuvrability, allowing precise checks on small to medium components without compromising control. Is the material resistant to workshop wear? Constructed from standard carbon steel, the square is designed for routine workshop use and provides robust contact surfaces for repeated inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Adjustable Angle Bracket Zinc-Plated Plain Steel - Metav IndustryLine
Benefit from galvanised corrosion resistance and the compact 200 mm bar length combined with a user-friendly wing nut that enables quick, reliable clamping. Order the adjustable angle bracket directly via Metav Werkzeuge or ask our consultants if needed. Adjustable angle bracket — 200 mm galvanised mild steel with wing nut (Metav IndustryLine) The Adjustable angle bracket is a compact positioning aid for workshop and fixture applications, providing secure angular alignment and repeatable stops in metalworking and general assembly tasks. Robust galvanised mild steel construction 200 mm bar length for standard workshop tasks Quick clamping with integrated wing nut Suitable for jigs, fixtures and alignment work Reliable positioning for everyday workshop tasks Built from galvanised mild steel, this bracket combines corrosion resistance with structural reliability, making it suitable for routine use in machine shops and general maintenance. The 200 mm bar length offers a pragmatic balance between reach and rigidity, allowing precise seating against workpieces without excessive flex. Thanks to the simple geometry, the bracket integrates easily into existing assemblies and provides a stable reference edge for repeat operations, reducing setup time and supporting consistent production flow. Fast adjustments and secure clamping that save time The integrated wing nut enables rapid manual tightening and loosening, turning positional adjustments into a single-handed operation. This quick-clamp behaviour is particularly effective when used in jigs and fixtures, where frequent repositioning is required; it reduces cycle time and minimises the need for additional fastening tools. The plain, direct clamping mechanism also lowers the risk of over-torque, which helps preserve component surfaces and keeps fixturing precise and repeatable. Durability and straightforward handling for workshop reliability With minimal maintenance demands and a straightforward design, the bracket delivers long service life under normal workshop conditions. The galvanised finish protects the steel substrate from moisture and workshop contaminants, while the uncomplicated fastening interface makes the part accessible for users with varying experience levels. As part of the Metav IndustryLine range, this component supports the goal of making reliable, industrial-grade fixturing affordable and easy to source for everyday manufacturing and repair tasks. For durable, galvanised positioning hardware choose the Metav IndustryLine adjustable angle bracket and contact Metav Werkzeuge in Emmerich for specification advice and rapid dispatch Technical Data Article number: M214.942 Name: Adjustable angle bracket, 200 mm, galvanised mild steel Manufacturer: Metav IndustryLine Core data Bar length: 200 mm Fastening: wing nut Material: mild steel (galvanised) Features Corrosion-resistant galvanised finish Simple, reliable wing nut clamping Designed for jigs, fixtures and alignment tasks FAQ What material is the bracket made from? The adjustable angle bracket M214.942 is made from galvanised mild steel, providing corrosion resistance suitable for workshop environments. What is the effective length of the bracket? The bar length is 200 mm, a standard dimension that balances reach and stiffness for general metalworking and assembly applications. How is the bracket fixed in position? Positioning is secured with an integrated wing nut, allowing quick manual clamping and easy readjustment on jigs and fixtures. Which applications suit this bracket best? The component is intended for jigs, fixtures, alignment stops and general workshop fixturing where a compact, robust positioning aid is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Multiple-Angle Square, Factory Standard 1/25°, Stop Feature, Hardened Carbon Steel - Metav IndustryLine
Take advantage of the combination of factory-grade angular accuracy and a compact, robust build for consistent layout work; the integrated stop speeds repeat checks while the 200 mm length keeps handling precise and manageable. Order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Multi-angle square M214.447 — 200 mm precision layout square (Metav IndustryLine) The Multi-angle square M214.447 is a 200 mm precision layout square designed for workshop angle verification and repeatable setting tasks, supplied in mild steel with an integrated stop. 200 mm precision length Factory accuracy 1/25° Mild steel construction Integrated stop for repeatability Consistent angular accuracy for reliable setup The instrument delivers factory-standard 1/25° conformity, corresponding to an angular accuracy of ±0.04°, which supports repeatable alignment and inspection tasks in production and maintenance. Built to a simple but robust specification, the tool reduces setup rework: the specified tolerance ensures that angle checks performed with this layout gauge are directly comparable across different shifts and fixtures. This technical precision is particularly valuable where small angular deviations cascade into larger assembly or machining errors, so measurable improvement in process stability can be expected. Robust material and compact handling improve daily throughput Manufactured from mild steel, the square balances stiffness with manageable weight (0.2 kg) for quick one‑hand handling and stable placement on workpieces. The 200 mm length offers the best compromise between reach and rigidity, making it suitable as a universal shop standard for marking, squaring and checking smaller assemblies. The compact profile minimises flex and helps to keep contact surfaces aligned, which translates into fewer retests and a smoother workflow on the shop floor. Integrated stop for efficient, repeatable operations An integrated stop allows rapid repeat settings without the need for auxiliary fixtures, speeding up batch inspection and layout tasks. Where multiple identical components must be checked or marked, the stop ensures consistent seating and reduces operator variance. The straightforward design also keeps maintenance simple: there are no electronic parts or consumables, which supports uninterrupted use in heavy‑duty workshop environments. Practical uses and suitability for industrial tasks The square is intended for general metrology and layout work in machine shops, jigs and fixture assembly, and quality control stations. As a compact angle gauge it complements existing measurement sets, providing a reliable reference for squaring, checking perpendicularity and establishing basic angular references. Its categorical fit in industrial metrology means it pairs well with calipers, height gauges and dial indicators to form a concise inspection toolkit for everyday use. Choose the Metav IndustryLine Multi-angle square for dependable angular checks — contact Metav Werkzeuge in Emmerich for tailored advice or specification support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M214.447 GTIN: 4054469108834 Material: Mild steel Weight: 0.2 kg Length: 200 mm Norm: Werksnorm 1/25° Accuracy: 0.04° Core specifications Accuracy: ±0.04° (Werksnorm 1/25°) Length: 200 mm Weight: 0.2 kg Tariff code: 90178090 eClass: 21170139 Features & design Integrated stop for repeatable settings Mild steel construction Factory standard conformity Compact layout square / angle gauge FAQ What level of angular accuracy does this square offer? The Multi-angle square M214.447 is manufactured to a Werksnorm 1/25°, equivalent to an angular accuracy of about ±0.04°, suitable for routine workshop alignment and inspection tasks. Which material is the tool made from and how does that affect use? The body is made of mild steel, giving the square a robust surface and stable seating on workpieces while keeping the weight low at 0.2 kg, which aids handling during repetitive checks. Is the integrated stop suitable for batch measurements? Yes, the integrated stop on the Multi-angle square M214.447 enables rapid, repeatable seating for batch inspection and marking, reducing setup time and operator variance. Can this square replace more complex angle-measuring instruments? The square serves as a reliable layout and reference tool for everyday tasks; for sub‑degree laboratory measurements other specialised instruments may be more appropriate, but this square provides a cost‑efficient, workshop‑grade solution. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Six-Point 120° Steel Square Without Stop, DIN 875/2 - Metav IndustryLine
Take advantage of the combination of precise 120° geometry, robust mild steel construction and compatibility with DIN 875/2 tolerances to ensure repeatable alignment checks and reliable workshop handling; order via Metav Werkzeuge or contact our consultants for specific application advice. Hexagonal angle 120° M214.456 — 200 × 200 mm precision measuring angle (Metav IndustryLine) A Hexagonal angle 120° M214.456 precision measuring square designed for alignment and inspection tasks in metalworking and general workshop measurement, 200 × 200 mm measuring faces, manufactured from mild steel and supplied without a stop. 120° hexagonal precision angle 200 × 200 mm measuring faces Made from mild steel, DIN 875/2 Supplied without stop for flexible use Consistent angular reference for alignment and inspection The 120° geometry delivers a defined angular reference that supports repeatable set-ups and go/no-go checks. Built to the DIN 875/2 tolerance class, the component provides confidence when comparing machined edges or verifying fixture alignment; this adherence to a recognised standard simplifies documentation in quality procedures and reduces uncertainty in serial checks. The rigid form factor translates geometric accuracy into fewer calibration adjustments and less rework. Durable workshop construction with clear measuring faces Manufactured from mild steel, the tool balances robustness with machinability for everyday shop use. The 200 × 200 mm measuring faces are large enough to span typical component edges while remaining compact for bench handling and storage. Smooth, machined faces aid secure contact against workpieces; the absence of an integrated stop allows flexible positioning and pairing with bespoke fixtures or clamping solutions without interference. Practical size for routine production and inspection The chosen dimensions keep the device stable under hand positioning yet manageable for single-person operation on benches and inspection tables. The combination of 120° geometry and the stated face size suits tasks such as checking bevels, fixture squareness and angular indexing on assemblies. When a defined stop is not required, the tool’s no stop configuration permits customised fixturing and unobstructed measurement of irregular parts. Traceability and procurement details for workshop integration Identification data such as SKU M214.456 and GTIN 4054469108896 support inventory control and procurement processes. Classification under the measuring-instrument category aids technical ordering and ensures compatibility with existing workshop quality documentation. The simple, standard-compliant design eases replacement planning and integration into tool cabinets or inspection kits. For workshop-grade angular checks and fixture setup, choose the Metav IndustryLine hexagonal angle and consult Metav Werkzeuge for tailored advice or to arrange supply via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data SKU: M214.456 GTIN: 4054469108896 ECLASS: 21170119 Facts Angle: 120° Measuring faces: 200 × 200 mm Tariff number: 90178090 Special features Material: mild steel Standard: DIN 875/2 Supplied without stop Category: measuring instrument — angle Manufacturer: Metav IndustryLine FAQ What materials is this angle suitable for? The Hexagonal angle 120° M214.456 is constructed from mild steel and serves as a reference tool for checking machined steel and similar materials in workshop inspection tasks. Does the angle comply with a recognised tolerance standard? Yes — the tool is manufactured to DIN 875/2, which defines the geometric tolerances for reference squares and supports consistent measurement quality. What does “supplied without stop” mean for practical use? Supplied without a stop means the angle has no fixed abutment; this M214.456 variant permits free positioning and is intended for flexible fixturing or applications where an integrated stop would impede measurement. Can the angle be used for serial inspection on a production line? The robust design and DIN 875/2 compliance make this angle suitable for routine inspection tasks and alignment work in production environments where a stable angular reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200x130 mm Angle Plate With Stop, DIN 875/1, Mild Steel - Metav IndustryLine
The combination of DIN 875/1 conformity, a compact 200 x 130 mm footprint and an integrated stop delivers reliable right-angle references for routine layout and inspection tasks; order this specialist square through Metav Werkzeuge or consult our advisors for matching accessories and delivery details. Metav IndustryLine Engineer's Square M214.356 — 200 x 130 mm, DIN 875/1, Mild Steel The Metav IndustryLine Engineer's Square is a robust right-angle reference tool for metalworking layout, inspection and fixture setup, designed to give a stable datum for repetitive positioning tasks. DIN 875/1 accuracy in mild steel construction Integrated stop for repeatable positioning Compact 200 x 130 mm blade and stock Durable, workshop-ready finish at 0.77 kg Accurate right-angles that speed inspection Manufactured to DIN 875/1, this square provides a dependable reference for right-angle checks and transfer marks. The 200 x 130 mm blade and stock offer a balance between reach and rigidity, giving a stable datum for marking, layout and inspection without excessive overhang. Machined mating faces ensure contact across the full length of the stock and blade, reducing measurement variation; the weight of 0.77 kg adds stability when holding the tool against workpieces. For workshops that prioritise reproducible setups, the combination of standardized geometry and sturdy mild steel construction supports consistent results across repeated operations. Faster set-ups through repeatable positioning An integrated stop simplifies repetitive tasks: once set, the stop keeps components aligned for sequential operations, cutting setup time and lowering the risk of layout errors. The compact format is well suited to benches and jigs where one-handed handling and quick orientation are important, while the solid construction tolerates everyday workshop handling. The tool’s attributes serve rational needs—reduced throughput times and fewer quality escapes—making it a practical investment for production areas, toolrooms and maintenance shops that rely on efficient, error-minimised processes. Built for workshop life with dependable sourcing Constructed from durable mild steel, the square is intended for regular shop-floor use; its mass and finish assist repeatable contact under normal handling. Sourced via Metav, customers benefit from a European quality filter and direct distribution from Emmerich, ensuring consistent supply and quality control. Metav’s experience in precision tooling and a broad catalogue simplifies procurement: matching the square to a broader set of workshop gauges or clamping accessories is straightforward thanks to available technical advice and an established logistics network. The result is practical reliability backed by an experienced supplier. Contact Metav Werkzeuge for product matching, delivery options and tailored advice from Emmerich – request guidance to ensure the engineer's square fits the intended workshop application Technical Data Article number: M214.356 GTIN: 4054469108360 Manufacturer: Metav IndustryLine Material: Mild steel Facts Size: 200 x 130 mm Weight: 0.77 kg Standard: DIN 875/1 Tariff number: 90178090 eCl@ss: 21170119 Features & compliance Integrated stop (mit Anschlag) Designed for layout, inspection and fixture setup Category: Angles / precision squares Workshop-oriented construction and handling FAQ What level of accuracy does this square provide? The Metav IndustryLine Engineer's Square M214.356 is produced to DIN 875/1, delivering a workshop-grade right-angle reference suitable for layout and inspection tasks requiring reproducible contact and alignment. Is the square suitable for use in jig and fixture set-up? Yes, the integrated stop and stable 200 x 130 mm geometry make this square well suited for jig and fixture positioning where repetitive, consistent alignment is required. How heavy and portable is the tool for bench work? At 0.77 kg, the square is heavy enough to provide stability on the workpiece yet compact enough for convenient bench use and one-person handling. What material is the square made from and how does that affect maintenance? Manufactured from mild steel, the square withstands routine workshop use; periodic inspection for burrs and light corrosion control will preserve the contact faces and ensure consistent performance. Can the square be used for inspection on larger assemblies? The compact design is intended for component-level layout and inspection; for larger castings or assemblies, combine the square with appropriate support and fixturing to maintain reliable contact and alignment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200x130 mm Angle Plate With Stop, Stainless Hardened, DIN 875/0 - Metav IndustryLine
Take advantage of the combination of high accuracy and robust stainless‑steel construction for repeatable right‑angle checks and efficient layout work; order or request advice via Metav Werkzeuge for prompt delivery and technical guidance. M214.316 Precision stop square — 200 x 130 mm, DIN 875/0 (Metav IndustryLine) The M214.316 precision stop square is designed for right‑angle verification and layout tasks in metalworking, inspection and toolroom environments. DIN 875/0 accuracy class Hardened stainless steel construction Integrated stop for repeatable positioning Accuracy that protects production quality The M214.316 is manufactured to DIN 875/0, the highest square accuracy class for workshop squares, delivering reproducible right angles that reduce setup errors and rework. The defined tolerance of this class ensures that angle checks meet stringent inspection criteria, which is essential for component assembly and quality assurance processes. Using a certified precision square streamlines inspection workflows and provides a verifiable basis for acceptance or correction during incoming or in‑process checks. Robust construction for everyday shop use Built from stainless steel and hardened for wear resistance, the tool resists deformation and surface corrosion in demanding workshop conditions. The hardened blade and body preserve flatness across repeated measurements, maintaining measurement integrity over time. An integrated stop simplifies repetitive marking and positioning, enabling faster fixture checks and layout work without compromising accuracy. The solid construction supports routine handling on the shop floor while minimising thermal and mechanical drift. Quick inspections and reliable layout for improved throughput This precision angle instrument speeds up routine checks and layout tasks by combining a stable reference face with easy positioning. The resulting repeatability lowers process variability and supports lean production practices: faster verification, fewer rejected parts and less downtime. Suitable for machine shops, toolrooms and inspection benches, the square is a practical choice where consistent right angles are a requirement. For specification clarifications or advice on integration into existing inspection routines, Metav Werkzeuge provides technical support and product availability information. For precision right‑angle control and purchasing guidance contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for local availability and expert advice. Technical data Article number: M214.316 GTIN: 4054469108049 ECLASS: 21170119 Facts Dimensions: 200 x 130 mm Accuracy: DIN 875/0 Tariff number: 90178090 Special features Material: stainless steel, hardened Integrated stop for repeatable positioning Category: precision angle square FAQ What level of accuracy does this square provide? The M214.316 precision stop square is manufactured to DIN 875/0, offering the highest workshop accuracy for right‑angle verification. Is the square suitable for use at an inspection bench? Yes. The hardened stainless steel construction and DIN 875/0 accuracy make the square appropriate for inspection benches and metrology applications. Can the integrated stop be used for repetitive marking operations? Yes. The integrated stop simplifies repeatable positioning for layout and marking tasks, reducing setup times. What materials is the square made from and how does that affect longevity? The square is made from stainless steel and hardened to resist wear and corrosion, preserving flatness and accuracy over prolonged use. Which industries or workshops benefit most from this tool? Machine shops, toolrooms, quality control labs and any workshop requiring reliable right‑angle checks will find the instrument valuable. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200x130 mm Angle Stop With Backstop, Hardened Stainless Steel DIN 875/2 - Metav IndustryLine
Take advantage of DIN 875/2 accuracy and a hardened stainless steel construction for dependable squaring and repeatable set-ups; order the Right‑Angle Stop directly via Metav Werkzeuge or ask our consultants if needed. Right‑Angle Stop 200 × 130 mm (DIN 875/2) — Metav IndustryLine, hardened stainless steel The Right‑Angle Stop 200 × 130 mm (DIN 875/2) is a hardened stainless steel precision square designed for workshop inspection, layout and jig alignment tasks where a compact, repeatable reference is required. DIN 875/2 precision class Hardened stainless steel construction Compact 200 × 130 mm footprint Integrated stop for repeatable setup Reliable tolerance and what DIN 875/2 means for production The square is manufactured to DIN 875/2, which defines the permissible angular deviation for engineer's squares and ensures a consistent reference across routine inspection tasks. Meeting this standard delivers a measurable tolerance appropriate for workshop and general engineering use, providing a reliable baseline for squaring components and checking right‑angle assemblies. The combination of standard conformity and a hardened stainless steel body reduces wear at the reference edges, so the tool maintains its geometry under frequent use and gives traceable results during repeated set‑ups. Compact design that speeds up repetitive set‑ups With a 200 × 130 mm footprint and a mass close to 0.8 kg, the device offers an excellent balance between reach and manoeuvrability. The integrated stop simplifies repetitive operations: workpieces can be presented against the stop and referenced against the square face without secondary fixturing, reducing cycle time and setup variation. The compact format supports quick handlings, such as checking mounted fixtures, setting up workpieces for machining, or confirming perpendicular faces during assembly, while remaining rigid enough for dependable alignment in everyday workshop environments. Materials, durability and workshop suitability Constructed from hardened stainless steel, the component resists corrosion in humid workshop conditions and tolerates handling without rapid surface degradation. The hardened finish protects the critical edges from premature rounding and maintains the reference surface longer than untreated steels. This material choice also simplifies maintenance: a quick wipe with a mild solvent and a light oil film for storage will preserve the working surfaces. The robust construction suits metalworking, toolroom inspection and general fabrication tasks where a durable right‑angle reference is required. Application scenarios and added value for production workflows The precision square is well‑suited to bench inspection, jig and fixture alignment, layout work and pre‑machining checks. As a reference instrument in small series production or prototype development, it contributes to stable quality control by offering a fast, repeatable right‑angle reference. Paired with other workshop metrology, the square supports interface checks and helps to reduce downstream rework. Distributed through Metav IndustryLine, the product benefits from a quality‑controlled supply chain and practical availability for workshops seeking consistent measurement tools. Choose the Metav IndustryLine right‑angle stop for dependable squaring — contact Metav Werkzeuge in Emmerich for specification advice and procurement: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M214.376 GTIN: 4054469108520 Dimensions: 200 × 130 mm Weight: 0.8 kg Facts Standard: DIN 875/2 Material: Hardened stainless steel Tariff code: 90178090 Special features Integrated stop eClass: 21170119 Category: Angles Manufacturer: Metav IndustryLine FAQ What accuracy class does this square meet? The Right‑Angle Stop meets DIN 875/2; the Metav IndustryLine square (SKU M214.376) therefore provides the precision expected for general engineering and workshop inspection tasks. Is the material corrosion‑resistant for shop use? Yes — the body is made from hardened stainless steel, which offers enhanced resistance to corrosion and wear compared with untreated steels, making it suitable for routine shop environments. How does the integrated stop improve workflow? The integrated stop enables quick, repeatable positioning of parts against the square face so setups can be repeated with less variation, which is particularly useful for batch checks and fixture alignment. Can this tool be used for fixture alignment and layout work? Absolutely — the compact footprint and rigid construction make it ideal for layout, jig alignment and preliminary inspection tasks where a reliable right‑angle reference is required. What maintenance is recommended to preserve accuracy? Keep the faces clean and free of burrs, apply a light protective oil for storage, and avoid impacts to the reference edges; the hardened stainless construction helps maintain geometry under normal workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200x130 mm Angle Stop With Stop, DIN 875/2 Normal Steel - Metav IndustryLine
Take advantage of a precision-engineered checking square that combines DIN 875/2 accuracy, compact 200 x 130 mm format and robust normal‑steel construction for consistent squaring and fast setup on the shop floor; order via Metav Werkzeuge or consult our specialists for delivery and application advice. Precision Reference Square M214.575 — 200 x 130 mm, DIN 875/2 The Precision Reference Square M214.575 is a compact, workshop-grade squaring tool designed for accurate edge alignment and repeatable positioning in metalworking and quality control tasks. Certified DIN 875/2 accuracy Robust normal steel construction Compact 200 x 130 mm working faces Integrated stop for repeatable positioning Fast, verifiable squaring for everyday production A compact reference square with DIN 875/2 tolerance gives a clear, measurable basis for alignment tasks and inspection routines. The 200 x 130 mm working faces provide a balance between reach and rigidity, enabling quick checks on components without sacrificing stability. Because the square is manufactured from normal steel, it offers predictable thermal and mechanical behaviour in standard workshop conditions; this supports reproducible results when used as a layout or inspection aid. The integrated stop simplifies repeated set‑ups, reducing cycle time during batch work and aiding process control by limiting setup variation. Built to withstand workshop use and provide long service life The construction emphasises durability and straightforward handling: a machined contact face ensures consistent seating against datum edges while the body resists everyday knocks. The robust material choice and sound manufacturing tolerance reduce the need for frequent readjustment, so downtime is minimised and throughput increases. For environments where ease of handling matters, the compact format allows single‑hand positioning and rapid interchange between stations, which helps keep fixtures and gauging operations moving without complex fixturing. Practical benefits for inspection and fixture building Used as a reference for squaring, marking out or verifying right angles, this tool fits into inspection benches and assembly jigs alike. The DIN 875/2 classification makes the square suitable for routine quality control and component set‑up where industrial standard accuracy is required. The integrated stop enhances repeatability for serial tasks, while the clear dimensional specification supports traceable process documentation. For teams seeking a pragmatic, long‑lasting solution, the design reduces operator variability and supports a predictable production flow. Contact Metav Werkzeuge today to discuss application suitability, availability and logistics from Emmerich — our specialists will advise on the best use of the Precision Reference Square and arrange delivery to your site Technical data SKU: M214.575 GTIN: 4054469109275 ECLASS: 21170119 Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/f3/f7/f4/62/62f4f7f367010652197d157c/m214353-main.jpg Facts Dimensions: 200 x 130 mm Tariff number: 90178090 Category path: Messgeräte › Winkel Special features Material: normal steel Standard: DIN 875/2 Feature: with stop Label: Precision reference square, nominal 200 x 130 mm FAQ What accuracy class does this square conform to? The square conforms to DIN 875/2, which provides a defined industrial tolerance suitable for routine workshop inspection and squaring tasks. Can the square be used for repeatable positioning in fixture work? Yes, the integrated stop is intended to provide repeatable positioning for serial set‑ups and marking operations using the Precision Reference Square M214.575. Is the square suitable for temperature‑sensitive environments? The body is made from normal steel, offering standard thermal behaviour; for critical temperature‑controlled metrology, environmental compensation should be considered. What are the primary applications for this tool? Typical uses include layout and marking, right‑angle verification, jig and fixture alignment, and routine quality control checks in metalworking and mechanical workshops. How is the instrument supplied and where can further documentation be obtained? The square is supplied with standard documentation; for further details, certification copies or application advice, Metav Werkzeuge can provide technical information and delivery options. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ensure right angles every time with precision angle gauges
Angle measurement is decisive in metalworking, where even the smallest deviation from a 90° geometry can cause assembly errors or functional faults. The category covers both fixed verification tools and variable measuring instruments, presented here as angle gauges, with common synonyms control squares and sine bars used throughout.
Where and how these tools make the difference on the shop floor
For basic layout and rough alignment, the engineer’s square (a simple flat or bench square) serves as the workshop baseline; it is useful for marking and quick checks but not intended for precision components. When higher accuracy is required, control squares with hardened and lapped faces are used; they are produced in accuracy classes referenced by DIN 875 and designed for the light gap method, which reveals form errors by inspecting the gap between gauge and workpiece under illumination. In pipeline and vessel fabrication, the flange square provides a robust contact geometry to align flanged faces to pipe axes and to withstand high mechanical loading. For angles other than 90°, a sine bar enables trigonometrical determination by using end measures, achieving resolutions into the seconds of arc when set up correctly. Regular calibration and checks for wear and flatness of the legs are essential, since a rounded or damaged leg will distort results.
Practical advantages that reduce rework and speed production
- Reduced fitting errors through repeatable reference geometry using control squares.
- Clear detection of form errors with the light gap method (fast visual indication).
- Durable contact surfaces thanks to hardened and lapped faces, extending service life.
- Accurate non-90° measurement via sine bar setups, enabling fine angular adjustments.
- Stable alignment of flanged components with purpose-built flange squares, lowering assembly time.
Why Metav is the reliable partner for precision angle measurement
Metav stands for democratisation of precision. As an experienced precision partner, Metav combines decades of know-how with a comprehensive range for industry, craft and trade; over 48,000 customers trust this quality filter based in Emmerich. With a broad assortment and consistent supply, Metav simplifies procurement and ensures a dependable source for angle gauges, calibration accessories and workshop standards.
Quick summary
Accurate angle gauges — from basic engineer’s squares to high-precision control squares and sine bars — prevent costly fit problems and support reliable, repeatable manufacture. Choose tools matched to the required accuracy class and maintain them regularly to keep measurement integrity.
FAQ
What is the difference between an engineer’s square and a control square?
An engineer’s square is a workshop baseline for marking and rough checks, while a control square features hardened and lapped faces and is manufactured to tighter tolerances (per DIN 875) for inspection and detection of form errors.
How does the light gap method work for checking right angles?
The light gap method places the workpiece against a control square; uneven gaps visible under a light source indicate deviations from perpendicularity, providing an immediate visual assessment of form errors.
When should I use a sine bar instead of a fixed angle gauge?
Use a sine bar when you need precise angles other than 90°. By stacking end measures you set the desired angle trigonometrically, achieving much finer resolution than most fixed gauges allow.
How often should angle gauges be checked for wear?
Regular inspection of flatness and leg condition is mandatory; any rounding or damage to the legs can significantly falsify measurements, so schedule checks according to usage intensity and your quality control procedures.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com