100mm Face Cutter Head 8 Inserts 45° Cutting Angle 50mm Overall Length M4x10 Torx T15 - Teknik Makina
Product information "100mm Face Cutter Head 8 Inserts 45° Cutting Angle 50mm Overall Length M4x10 Torx T15 - Teknik Makina"
Achieve stable, high‑capacity face milling with a 100 mm diameter cutter head, eight cutting edges and a 45° cutting angle for efficient chip control; order the tool directly via Metav Werkzeuge or consult our application specialists for tailored advice.
Face milling head T626TM – 100 mm diameter, for SNKX 1206 & ONHX 0505 indexable inserts (Teknik Makina)
Face milling head T626TM is a compact, robust cutter head engineered for medium‑duty face milling operations using SNKX 1206 and ONHX 0505 indexable inserts.
- 100 mm diameter for broad cutting paths
- Compatible with SNKX 1206 inserts
- Eight cutting edges for extended tool life
- 45° cutting angle for efficient chip control
Boosted material removal with efficient geometry
The T626TM cutter head delivers increased productivity through its 100 mm diameter and 45° cutting geometry. The inclined cutting angle reduces radial forces and promotes a favourable chip thinning effect, which in practice means smoother surface finishes and more consistent material removal rates. For machining setups that rely on stable, repeatable passes, this geometry translates into fewer tool passes and a shorter cycle time per workpiece.
Secure mounting and quick insert changes
Designed with a 32 mm mounting bore and a compact overall length of 50 mm, the head offers mechanical rigidity that helps to dampen vibration. Insert clamping is handled with an M4x10 Torx screw tightened by a T15 key, allowing fast and secure insert replacement. Indexable inserts are reversible or replaceable cutting pieces mounted in the head, so worn edges can be rotated or swapped without replacing the whole tool, reducing downtime and lowering running costs.
Broad compatibility for inventory flexibility
The head accepts the SNKX 1206 insert format and is also compatible with ONHX 0505 Palbit alternatives, providing flexibility across supply chains. Using standardised insert systems simplifies stock management and enables rapid adaptation to differing cutting tasks. The provision of eight cutting edges across the assembly increases cumulative edge life before a full service or resharpening is required, supporting longer intervals between maintenance actions.
Practical application and workshop advantages
This cutter head is suited to workshops and production lines that employ indexable insert systems and require a balance between cutting area and machine load. The combination of a moderate overall mass (1.813 kg) and compact design helps maintain toolholder stability while remaining manageable for routine handling and setup changes. For operations prioritising reproducible results and straightforward maintenance, the head provides a reliable option that integrates with common insert suppliers.
Contact Metav Werkzeuge for application guidance and to secure the Teknik Cutting Tools face milling head T626TM — Metav’s specialists in Emmerich will advise on insert choice, clamping and delivery options.
Technical data
- Article number: T626TM
- Designation: Face milling head for SNKX 1206 and ONHX 0505 indexable inserts
- Manufacturer: Teknik Makina
Facts
- Diameter: 100 mm
- Cutting edges: 8
- Overall length: 50 mm
- Mounting bore: 32 mm
- Weight: 1.813 kg
- Cutting angle: 45°
Special features
- Compatible inserts: SNKX 1206
- Alternative inserts: ONHX 0505 Palbit
- Torx screw: M4x10
- Torx key size: T15
FAQ
What insert types fit this cutter head?
The face milling head accepts SNKX 1206 indexable inserts and can also be fitted with ONHX 0505 Palbit alternatives for greater sourcing flexibility.
How is an insert secured in the head?
Inserts are clamped with an M4x10 Torx screw using a T15 key; the fastening method on the T626TM ensures repeatable seating and reliable cutting performance.
Which machines are suitable for this cutter head?
The cutter head is intended for machines that support a 32 mm mounting bore and the SNKX/ONHX insert systems; it is optimised for medium‑duty face milling where a 100 mm diameter tool is appropriate.
How does the 45° cutting angle affect machining?
A 45° cutting angle reduces radial cutting forces and improves chip evacuation, which typically results in smoother surfaces and steadier cutting behaviour on successive passes.
Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
| Cutting angle: | 45.0 |
|---|---|
| Designation: | Planmesserkopf |
| Diameter-1: | 100mm |
Zubehör
Take advantage of precise M5 threading and a compact 12 mm length for secure, space-saving fastening; the Torx drive reduces cam‑out and speeds assembly. Order directly via Metav Werkzeuge or consult our product specialists for application advice. Torx screw TC083TM — M5 x 12 mm, Torx drive (Teknik Makina) Torx screw TC083TM for mechanical assemblies where compact form and reliable torque transfer are required M5 thread for standard metric assemblies Head diameter 7 mm for defined seatings Compact 12 mm overall length for confined spaces Torx drive compatible with T20 bits Consistent M5 thread for secure connections The fastener is engineered with a defined M5 thread that provides consistent engagement and predictable clamping behaviour. Where repeatability matters, the metric thread profile reduces the risk of loosening under light vibration and simplifies torque setting during assembly. The specification supports common production and maintenance environments, enabling standardised tooling and fewer inventory variants. Space-saving dimensions that simplify assembly With an overall length of 12 mm and a head diameter of 7 mm, this component is designed for installations where clearance is limited. The compact geometry allows secure fastening without protruding components, which benefits stacked or nested assemblies. Small form factor screws like this shorten installation time in cluttered assemblies and often remove the need for additional countermeasures such as washers or spacers. Torx drive for efficient torque transfer and less wear A Torx drive provides improved engagement between tool and fastener, allowing higher torque transmission with reduced cam‑out compared with slotted or Phillips drives. The drive compatibility with T20 bits enables rapid screwdriving with cordless or pneumatic drivers while protecting both the bit and the screw head from premature damage. The result is faster cycle times and lower tool‑replacement costs in production and workshop settings. Designed for straightforward procurement and workshop use Supplied under the Teknik Makina designation, the TC083TM is a practical choice for procurement managers seeking an economical, repeatable fastening solution. The concise specification and common drive type simplify stockkeeping and tool selection. For workshops, the screw’s straightforward geometry and compatibility with standard Torx tooling support quick decisions on repair and retrofit operations. For reliable fastening from Teknik Makina, contact Metav Werkzeuge to discuss compatibility, availability or to place an order for the TC083TM fastener — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: TC083TM EClass: 21189290 Manufacturer: Teknik Makina Key measurements Diameter: 7 mm Thread: M5 Overall length: 12 mm Angle: 60° Weight: 0.1 kg Features and compatibility Drive type: Torx Compatible driver: T20 Torx key Fastener type: screw FAQ What driver is required for this screw? The screw is designed for a Torx drive and is compatible with a T20 Torx key or bit; this ensures efficient torque transfer for the TC083TM. Is the TC083TM suitable for tight assemblies? Yes, the overall length of 12 mm and a head diameter of 7 mm make the TC083TM appropriate for compact or recessed fastening applications. Which thread does this fastener use? The fastener uses a metric M5 thread, suitable for common metric assemblies and compatible with standard M5 threaded holes and inserts. Can this screw be used with power drivers? The Torx drive and T20 compatibility allow use with cordless and pneumatic drivers; correct torque settings should be observed to avoid over‑tightening. Who manufactures this screw? The screw is supplied under Teknik Makina and listed with article number TC083TM for procurement and stock purposes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com