Rapid and reliable thickness measurement for metalworking quality control
Thickness measurement ensures precise control of sheet and component dimensions in metalworking by providing immediate, process-integrated feedback that reduces scrap and rework. Handheld instruments such as the micrometer, caliper and fine‑needle thickness gauge serve distinct roles: the micrometer with its ratchet delivers a consistent contact pressure, the caliper offers versatility for general measurements, and the fine‑needle gauge provides reproducible results on elastic or very thin materials thanks to its defined spring force. Proper use demands attention to external influences like thermal expansion from body heat and regular calibration with reference gauges at room temperature to maintain accuracy. Employing these tools correctly enables rapid detection of deviations and supports corrective action directly at the workstation.
500mm Thickness Caliper With Colour 1.5" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Benefit from high-resolution readout and factory traceability: the calliper combines a 0.001 mm reading resolution with a stated accuracy of 0.05 mm and wired/wireless data transfer to support efficient quality checks. Order the Thickness calliper directly via Metav Werkzeuge or ask our consultants if needed. Thickness calliper – Microtech Metrology; 500 mm medium-range with touchscreen The Thickness calliper is a digital measuring instrument for thickness and profile checks, designed for medium-range workshop and toolroom applications with clear touchscreen readout and flexible data export. Colour 1.5" touchscreen display Wireless and USB data output ISO 17025 calibration certificate included 500 mm medium-range for workshop use High-resolution readout that boosts throughput and confidence The instrument offers a 0.001 mm reading resolution combined with a specified accuracy of 0.05 mm, which allows for reliable pass/fail decisions during routine inspections. This combination delivers practical precision: the fine display resolution supports exact positioning and repeatable readings, while the declared accuracy defines the measurement uncertainty to be used in reports. For production control, the result is fewer re-measures and faster cycle times—thanks to the precise digital readout and stable mechanical guidance. The calibration status and traceability reduce uncertainty in acceptance criteria and support documented quality routines. Medium-range design for workshop versatility With a maximum measuring length of 500 mm, the device sits in the medium-range class that balances reach and stiffness for general machine‑shop tasks. This dimension is ideal for components such as housings, fixtures and medium-sized assemblies where single-hand operation and rigidity are required. The stroke layout X:0–500 and Z:0–150 mm enables direct thickness checks and limited profile measurements without switching instruments, reducing handling and the risk of measurement error. The instrument’s construction keeps deflection low across the working span, ensuring consistent results across the full measuring range. Modern display and flexible data transfer for smoother workflows The 1.5" touchscreen presents readings and menus clearly, while the combined Wireless and USB data outputs allow direct logging into inspection software or portable data collectors. This removes manual transcription, shortens reporting time and lowers the likelihood of clerical mistakes. The touchscreen simplifies unit selection and zeroing operations, which speeds up repeated measurement tasks on the shop floor. Where traceable records are required, wireless transfer or a USB export streamlines integration with statistical process control and quality documentation systems. Calibrated delivery and supplier reliability for audit-ready use The instrument is supplied fully calibrated to ISO 17025, and a calibration certificate is included with delivery to document traceability and conformity. Such factory calibration supports internal audits and simplifies initial deployment into inspection procedures. The product is manufactured by Microtech Metrology and is distributed through Metav Werkzeuge’s European supply network, which provides consistent availability and a practical quality filter at the Emmerich site. This combination of traceable calibration and dependable distribution minimises downtime and supports continuous quality assurance in production. Contact Metav Werkzeuge for tailored advice and to arrange purchase of the Microtech Metrology Thickness calliper calibrated to ISO 17025 and ready for immediate dispatch from Emmerich Technical data Article number: 149020507 GTIN: 4061905045875 Manufacturer: Microtech Metrology Digital: yes Display: Colour 1.5" touchscreen Data output: Wireless + USB Accuracy: 0.05 mm Reading resolution: 0.001 mm Measuring range: X: 0–500 mm / Z: 0–150 mm Calibration: ISO 17025 certificate included Numbers Accuracy: 0.05 mm Resolution: 0.001 mm Display size: 1.5 inches Measuring range (max): 500 mm Special features Medium-range calliper construction for reduced deflection 2D-capable thickness and profile checks Dual data interface: wireless and USB Supplied calibrated with certificate for traceability Manufacturer: Microtech Metrology FAQ What calibration documentation is supplied with the instrument? The Thickness calliper from Microtech Metrology is delivered fully calibrated to ISO 17025 and includes a calibration certificate documenting traceability. Which measurement range is covered by this calliper? The device covers a measuring range up to 500 mm (X: 0–500 mm; Z: 0–150 mm), making it suitable for medium-range workshop and toolroom tasks. How precise are the readings and what is the stated accuracy? Readings are displayed to 0.001 mm resolution, with a stated accuracy of 0.05 mm; use the accuracy value when assessing measurement uncertainty for quality documentation. How can measurement data be exported from the instrument? Data can be transferred either wirelessly or via USB, enabling direct logging to inspection software or portable data collectors without manual entry. Is this instrument suitable for integration into production quality control? Yes; the combination of precise readout, dual data output and ISO 17025 calibration makes the calliper appropriate for routine production control and traceable documentation (SKU 149020507). Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50mm Digital Precision Caliper for Sheet Thickness Measurement, 10mm Round Jaws, Self-Closing, Metal Body, Kit - Metav IndustryLine
Take advantage of a compact measuring tool that combines reliable repeatability, a clear digital readout and robust stainless‑steel construction for consistent sheet‑metal thickness checks; order directly via Metav Werkzeuge or contact our consultants for assistance. M240.076 Digital caliper for sheet‑metal thickness (0–50 mm) — Metav IndustryLine M240.076 is a compact digital caliper optimised for rapid and accurate sheet‑metal thickness measurement in workshop and production environments Digital display with mm/inch and zero function Hardened stainless‑steel construction Self‑closing spring mechanism Supplied in protective case Precise measurement where space and speed matter The compact design of this digital caliper delivers repeatable thickness checks for thin materials thanks to its 0–50 mm measuring range and fine resolution (0.01 mm). With a declared accuracy of ±0.05 mm, the instrument meets common workshop tolerances for quality control and production sampling. The round measuring faces reduce local deformation on thin sheets and, combined with the hardened stainless‑steel build, ensure measurements remain consistent even under frequent use. This results in fewer rechecks and smoother process control in sheet‑metal workflows. Faster checks and one‑hand operation to raise throughput A concise set of functions—on/off, mm/inch and zero—speeds up routine tasks and avoids unnecessary menu navigation. The self‑closing spring enables single‑handed operation for quick, repeatable readings, reducing cycle times on the shop floor. Supplied in a protective case, the caliper arrives ready for immediate use and safe transport between workstations. Classified as a Micro caliper (measuring range up to 100 mm), it is especially suited to precision trades and fine mechanical assemblies where compactness, ergonomics and fast handling are priorities. Built for reliable shop‑floor quality processes Constructed with a metal housing and hardened measuring surfaces, the tool withstands daily industrial use and provides a stable measuring reference. The clear digital readout mitigates reading errors associated with analogue scales, supporting traceable recording of thickness values in inspection routines. The modest weight aids handling without sacrificing stiffness, so measurements stay reproducible across multiple operators. For manufacturers and workshops requiring dependable thickness checks, this caliper integrates easily into standard quality workflows and inspection stations. Contact Metav Werkzeuge for order placement or technical advice on the Metav IndustryLine M240.076 and to confirm suitability for specific sheet‑metal applications via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M240.076 GTIN: 4054469112770 Manufacturer: Metav IndustryLine Facts Measuring range: 0–50 mm Resolution: 0.01 mm Resolution (inch): 0.0005 in Accuracy: ±0.05 mm Weight: 0.4 kg Special features Material: hardened stainless steel, metal housing Display: digital with on/off, mm/inch and zero functions Self‑closing spring mechanism Supplied in protective case Measuring faces: round Suited to sheet‑metal thickness measurement FAQ What measuring range does this caliper cover? The digital caliper covers a measuring range of 0–50 mm and is intended for sheet‑metal thickness checks. How accurate is the instrument for routine inspections? Accuracy is specified as ±0.05 mm, which is suitable for standard workshop quality control and production sampling. Is the caliper supplied ready for use and how is it protected? The caliper is supplied in a protective case for transport and immediate use on the shop floor. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Digital Test Indicator With 8mm Shank, Spring Plunger, 0.01mm Resolution, Supplied In Case - Metav IndustryLine
Take advantage of the combination of precise 0.01 mm resolution, a compact 0–50 mm measurement range and a spring‑loaded probe tip for reliable comparative checks; order the Digital probe 50 mm with 8 mm shank directly via Metav Werkzeuge or consult our advisers for application-specific guidance. Digital probe 50 mm with 8 mm shank – 0.01 mm resolution, digital display Digital probe 50 mm with 8 mm shank provides a compact, shop‑ready solution for comparative measurements and small‑part inspection across machine shops and inspection benches 0.01 mm digital resolution 0–50 mm measurement range Spring‑loaded probe tip Protective transport case included Precise results for routine quality checks The digital display and fine resolution of 0.01 mm make this measuring gauge suitable for routine dimensional checks and comparative inspection where reproducibility matters. With a stated accuracy of ±0.03 mm, the probe delivers repeatable readings that align with standard workshop tolerances; this level of performance supports entry‑level quality control, first article checks and setup verifications without the complexity of laboratory instruments. The numeric display with mm/inch switching and a zero function simplifies data reading and transfer to downstream documentation. Compact design that integrates easily into fixtures A robust 8 mm shank enables secure mounting in common holders and test stands while the spring‑loaded probe tip ensures controlled contact force during measurements. The limited measurement force (<2.5 N) reduces the risk of part deformation when checking delicate components, and the modest mass (0.23 kg) plus overall length (148 mm) keeps the device manoeuvrable for use at the bench or on portable inspection rigs. These features permit straightforward integration into existing measurement jigs and comparator setups, improving workflow efficiency. Practical operation and protected transport Operation is straightforward: the instrument offers an On/Off control, zeroing and quick mm/inch toggling on the display to support mixed workflows. Supplied in a protective case, the unit is configured for secure storage and transport between workshop and inspection areas. The compact format and clear readout reduce operator handling time during repetitive tasks, helping to keep inspection throughput steady while maintaining consistent results. For application advice or to discuss integration of the Metav IndustryLine digital probe into existing inspection processes, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical Data Article number: M240.128 GTIN: 4054469181301 Category: Messuhren Tariff number: 90173000 Facts Measurement range: 0–50 mm Resolution: 0.01 mm / 0.0005 in Accuracy: ±0.03 mm Shank diameter: 8 mm Length: 148 mm Weight: 0.23 kg Measurement force: <2.5 N Special features Digital display with On/Off, mm/inch and zero Spring‑loaded probe tip Protective transport case included Compact format for bench and portable inspection FAQ What resolution and accuracy does the Digital probe 50 mm with 8 mm shank provide? The Digital probe 50 mm with 8 mm shank has a resolution of 0.01 mm and an accuracy of ±0.03 mm, suitable for common workshop inspection tasks. Can the probe be mounted in standard holders or test stands? Yes, the device features an 8 mm shank for secure mounting in standard holders and comparator fixtures. Is the probe suitable for delicate parts? The probe's spring‑loaded tip and measurement force below 2.5 N reduce the chance of deforming sensitive components during contact checks. Does the delivery include a case for transport? A protective transport case is included with the product to facilitate safe storage and movement between workstations. Which display functions are available for quick measurements? The unit offers an On/Off switch, a zeroing function and mm/inch conversion on the digital display for rapid, unambiguous readings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Digital Test Indicator With Self‑Closing Measuring Jaws, 0.005mm Resolution, Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the 0–50 mm measuring range, the 0.005 mm display resolution and the robust stainless construction to achieve repeatable external measurements on small components; order the probe directly via Metav Werkzeuge or ask our consultants if needed. Digital measuring probe M240.077 — 0–50 mm range, 0.005 mm resolution (Metav IndustryLine) A Digital measuring probe M240.077 designed for precise external measurements on calipers and compact workshop components. 0–50 mm measuring range 0.005 mm display resolution Stainless hardened construction Self-closing measuring jaws Precision built for small-part inspection The module delivers industrial-grade precision across its 0–50 mm range, combining a fine 0.005 mm display step with a rated accuracy of ±0.02 mm. Classified in the micro segment for calipers, this format is tailored to fine mechanical tasks where minimal jaw length and low torsion matter. The compact footprint preserves repeatability when checking thicknesses, grooves or thread profiles, providing a measurable improvement in quality-control throughput for workshops and small-series production. Durable design that simplifies handling Constructed from stainless steel that has been hardened for wear resistance, the probe withstands repeated workshop use while remaining straightforward to handle. The self-closing measuring jaws reduce setup time and improve contact consistency during external measurements, and the standard Ø 5 mm mount makes attachment to caliper fixtures fast and reliable. Supplied in a protective transport case, the unit balances robustness with portability so inspection routines remain efficient without sacrificing component protection. Clear readout and workflow compatibility The integrated digital display provides practical functions — ON/OFF/ORIG, mm/inch switching and ZERO/ABS — that support mixed workflows and quick zeroing on datum faces. With a lightweight construction of about 0.5 kg and a concise set of functions, the probe integrates smoothly into existing caliper-based setups and bench inspection stations. Designed for external measurement tasks such as thickness checks, groove and thread inspection, the ensemble reduces operator-induced variance and helps standardise inspecting procedures across small-part production lines. For precise caliper measurements choose the Metav IndustryLine solution—contact Metav Werkzeuge for technical guidance and reliable supply from Emmerich. Technical data Article number: M240.077 GTIN: 4054469151922 Tariff number: 90173000 Brand: Metav IndustryLine Facts Measuring range: 0–50 mm Resolution: 0.005 mm Accuracy: ±0.02 mm Weight: 0.5 kg Mount diameter: Ø 5 mm Special features Material: stainless steel, hardened Digital display functions: ON/OFF/ORIG, mm/inch, ZERO/ABS Intended use: external measurements (thickness, grooves, threads) Self-closing measuring jaws Supplied in a protective transport case FAQ What measuring range does the probe cover? The probe covers a measuring range of 0–50 mm; the Digital measuring probe M240.077 from Metav IndustryLine (SKU M240.077) is intended for fine external inspections within that span. What resolution and accuracy can be expected? The device shows readings in 0.005 mm steps with a stated accuracy of approximately ±0.02 mm, suitable for workshop quality control and small-part inspection. Can the probe be mounted on standard calipers? Yes, the probe uses a Ø 5 mm mount and is compatible with common caliper fixtures for external measurements such as thicknesses, grooves and threads. What material is the probe made from and how durable is it? The instrument is manufactured from hardened stainless steel, designed for repeated use; it is supplied in a protective transport case to reduce the risk of damage during storage and transit. Which display functions are available? The digital readout includes ON/OFF/ORIG control, mm/inch switching and ZERO/ABS functionality for quick datum setting and flexible measurement workflows with the Digital measuring probe M240.077. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Digital Thickness Caliper With 10mm Anvil, Self-Closing Spring, Stainless Steel, ISO Calibrated - Metav IndustryLine
Take advantage of accurate, repeatable sheet-thickness checks with a compact instrument that combines a 0–50 mm measuring range, a hardened stainless steel frame and a quick-reading digital display. The self-closing spring and included transport case protect the jaws and improve handling during repetitive measurement tasks. Order the unit directly via Metav Werkzeuge or ask the consultants for tailored advice. Digital Caliper M240.075 — 0–50 mm sheet-thickness caliper with hardened stainless-steel frame and digital display The Digital Caliper M240.075 is a compact, purpose-built caliper for precise sheet-metal thickness measurement in workshop and production environments, providing repeatable readings where fast decisions are required Compact sheet-thickness caliper 0–50 mm Hardened stainless-steel frame, metal housing Digital display with mm/inch and zero functions Self-closing spring for safe, repeatable measuring Accurate checks for sheet-metal production Thanks to a measuring range of 0–50 mm and a display resolution of 0.01 mm, this instrument delivers the fine gradation needed for routine quality control. The stated accuracy of ±0.05 mm suits typical inspection tasks in metalworking and fabrication, making it straightforward to identify material thickness outside specified tolerances. Classified in the micro caliper segment, the design prioritises low deflection and one-handed operation so that small components and thin sheets can be measured reliably without complex setups. Robust build reduces downtime and rework A hardened stainless steel construction with metal housing offers mechanical resilience in daily shop use; the self-closing spring protects the measuring faces during handling and helps maintain consistent contact pressure. The jaws feature round measuring faces and a 10 mm anvil suited to sheet-metal contact, while the supplied transport case ensures safe storage and reduces the risk of transport damage. These features combine to reduce maintenance interruptions and lower the probability of measurement-related rework on the production line. Faster decisions with clear digital operation The digital display provides straightforward unit selection between mm/inch and a convenient zero function for comparative checks or step measurements. The ON/OFF and zero buttons make repetitive controls intuitive, shortening inspection cycles and improving throughput. With a compact, lightweight design, the instrument makes fast acceptance checks possible directly at the machine or bench, removing the need to move components to a separate measuring station and thereby saving time. Practical fit for workshops and inspection benches Designed for sheet-metal applications and general workshop metrology, this caliper supports efficient inspection workflows and steady documentation of batch checks. The combination of repeatable mechanical design and a clear digital interface makes it suitable for production control, incoming goods inspection and rapid in-process checks. Supplied by Metav IndustryLine, the instrument benefits from a manufacturer network that emphasises dependable supply and tailored metrology solutions for industrial customers. For reliable, workshop-ready sheet-thickness inspection, contact Metav Werkzeuge to request a quotation for the Metav IndustryLine digital caliper M240.075 or to speak with a consultant at +49 2822 7131930 Technical data SKU: M240.075 GTIN: 4054469112763 ECLASS: 21170344 Tariff number: 90173000 Range: 0–50 mm Resolution: 0.01 mm / 0.0005 in Accuracy: ±0.05 mm Weight: 0.4 kg Facts Measuring range max: 50 mm Anvil diameter: 10 mm Display units: mm / inch Reading increment: 0.01 mm Housing: metal Special features Hardened stainless-steel construction Metal housing Digital display with ON/OFF, mm/inch and zero Self-closing spring Delivered in transport case Measuring faces: round Manufacturer: Metav IndustryLine FAQ What measuring range does this caliper cover? The instrument measures from 0 to 50 mm, making it suitable for thin sheet and small-part thickness checks with the compact range required in metalworking. What resolution and accuracy can be expected? The caliper offers a resolution of 0.01 mm and an accuracy of ±0.05 mm, which supports reliable thickness assessment for routine inspection tasks. Is the tool designed specifically for sheet-metal thickness measurement? Yes, the geometry and a 10 mm anvil are tailored for sheet-metal contact, and the device is described as a sheet-thickness caliper for straightforward thickness verification. How are readings displayed and switched between units? Readings appear on a digital display with selectable mm/inch units and a zero function for comparative measurements. Does the instrument come with protection for transport? The caliper is supplied with a transport case to protect the measuring faces and electronics during storage and movement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Thickness Dial Gauge 0.01mm Resolution 800mm Depth ISO 17025 Calibrated - Microtech Metrology
For repeatable thickness measurement in workshop and production settings, rely on a compact analogue instrument with 0.01 mm dial divisions, an accuracy of ±0.09 mm and an extended 800 mm measuring depth; the unit is supplied fully calibrated with an ISO 17025 calibration certificate. Order the thickness gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thickness gauge with dial indicator — Microtech Metrology, 0–50 mm range, 0.01 mm resolution Thickness gauge with dial indicator is an analogue instrument for precise material-thickness checks and quality control tasks in machine shops and inspection benches, covering a measuring range of 0–50 mm with an 800 mm reach. Dial display with 0.01 mm resolution ISO 17025 calibrated with certificate Large 800 mm measuring depth Precision that reduces rework and inspection time The instrument combines an analogue dial indicator with fine graduations (0.01 mm) and a well-defined accuracy of ±0.09 mm, making it suitable where rapid, verifiable thickness checks are required. The clear dial and simple mechanics allow quick readings without the delay of power-up routines, which supports faster in-line or batch inspections. The difference between resolution and accuracy is explained at the point of use: while the dial shows increments of 0.01 mm, the stated accuracy specifies the permissible deviation, enabling planners to assess measurement uncertainty for process control. Robust design optimised for repetitive workshop use Built for repetitive handling, the gauge features a compact measuring head and a long measuring depth of 800 mm, permitting checks on large components or deep profiles without improvised fixturing. The analogue mechanism minimises sensitivity to electronic interference and is easy to operate with gloved hands, which improves throughput on the shop floor. The mechanical construction emphasises repeatability and low-maintenance operation, reducing downtime for routine checks and supporting a stable production rhythm. Calibrated traceability that fits quality systems Delivered with an ISO 17025 calibration certificate, this thickness gauge provides traceable measurement results suitable for documented quality procedures and audit trails. The supplied certificate confirms that the instrument was calibrated under an accredited laboratory regime and can be entered directly into a quality management system. For suppliers and inspection departments that must demonstrate metrological rigour, the included calibration reduces administrative steps and supports conformity with internal and external inspection requirements. Discuss application-specific setups or request the ISO 17025 calibration certificate through Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance. Technical data Article number: 137050801 GTIN: 4061905045325 Manufacturer: Microtech Metrology Facts Measuring range: 0–50 mm Resolution (dial divisions): 0.01 mm Stated accuracy: ±0.09 mm Measuring depth: 800 mm Display type: Analogue dial Calibration: ISO 17025 certificate included Special features Category: Dial gauge / thickness gauge Messtiefe 800 mm for deep-reach measurements Suitable for workshop and inspection bench use FAQ What is the smallest increment visible on the dial? The dial shows 0.01 mm divisions, enabling fine readback on each measurement with the analogue display. Is the instrument supplied with a calibration certificate? Yes, the thickness gauge from Microtech Metrology is delivered fully calibrated and includes an ISO 17025 calibration certificate. Which measuring range does the gauge cover? The instrument covers a measuring range of 0–50 mm, suitable for thin to moderate-thickness components. Can the gauge reach into deep or recessed parts? The design provides an 800 mm measuring depth, allowing measurement of recessed features and larger workpieces without additional fixtures. Is this an electronic instrument? No, it is an analogue dial instrument, chosen for quick mechanical readout and simple, robust operation. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50mm Thickness Gauge Dial Indicator Readout, 300mm Depth, Calibrated to ISO 17025 - Microtech Metrology
Take advantage of the instrument’s combination of reliable analogue measurement, fine resolution and certified calibration for reproducible thickness checks in the workshop; order directly via Metav Werkzeuge or contact our consultants for application advice. Thickness Gauge – Dial Indicator, 0–50 mm, Microtech Metrology The Thickness Gauge is a compact dial-based measuring instrument for precise thickness and depth checks in fine mechanical and quality-control environments. Calibrated to ISO 17025 with certificate Measuring range 0–50 mm 0.01 mm readout resolution 300 mm measuring depth Accuracy that reduces rework and speeds inspection The dial instrument delivers a 0.01 mm readout combined with a stated accuracy of 0.06 mm, which provides a reliable balance between fine resolution and robust workshop performance. This level of precision is suitable for routine quality control tasks where repeatable thickness checks prevent scrap and reduce set-up time. Being an analogue dial indicator, the measurement is immediate and intuitive, enabling fast decision-making on the shop floor without electronic setup. Designed for deeper checks and practical workshop use With a measuring depth of 300 mm the gauge allows inspection of parts that require an extended reach while keeping the instrument compact enough for single-person handling. The mechanical design avoids the need for batteries, reducing downtime and simplifying maintenance. A clear dial face ensures readings remain legible under workbench lighting; the analogue operation combined with a stable spindle makes it particularly effective for thickness and depth assessments on sheets, small assemblies and fitted components. Traceable calibration for documented quality assurance The unit is delivered calibrated to ISO 17025, with a traceable certificate supplied, supporting audit requirements and internal quality procedures. This documented calibration status ensures measurement results can be integrated into inspection records and compliance workflows. Supplied by a recognised metrology maker, the instrument supports consistent process control and contributes to a demonstrable reduction in measurement uncertainty in repetitive inspections. Contact Metav Werkzeuge for tailored application guidance, ISO 17025 calibration documentation and to discuss how this Microtech Metrology dial thickness gauge (SKU 137050301) fits into existing inspection routines Technical Data Article number: 137050301 GTIN: 4061905043741 Manufacturer: Microtech Metrology Facts Measuring range: 0–50 mm Readout resolution: 0.01 mm Stated accuracy: 0.06 mm Measuring depth: 300 mm Display: Analogue dial Special features Calibrated to ISO 17025; certificate included Category: Dial gauge / thickness measuring instrument Analog operation; no battery required Image asset available (SKU 137050301) FAQ How precise is the measurement on this thickness gauge? The thickness gauge from Microtech Metrology provides a readout resolution of 0.01 mm and a stated accuracy of 0.06 mm, suitable for standard workshop inspections and routine quality control. Is the instrument delivered with calibration documentation? Yes, the instrument is supplied calibrated to ISO 17025 and includes a traceable calibration certificate with the delivery. What is the useful measuring range and reach? The device covers a measuring range of 0–50 mm and a measuring depth (reach) of 300 mm, enabling checks on shallow and moderately deep features. Does the analogue dial require batteries or regular electronic maintenance? No. The analogue dial operation requires no battery power, which reduces maintenance and ensures immediate availability on the shop floor. For which workshop tasks is this dial thickness gauge best suited? It is optimised for thickness and depth checks on sheet materials, small components and assemblies where quick, repeatable readings and documented calibration are required; the ISO 17025 certificate supports integration into formal inspection routines. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50mm Thickness Gauge Digital Indicator Depth 800mm ISO 17025 Calibrated - Microtech Metrology
Taking advantage of ISO 17025 traceable calibration, a fine display resolution and a compact measuring range, this instrument delivers reliable thickness control for production and inspection workflows; order directly via Metav Werkzeuge or consult our specialists for application matching. Thickness Gauge with Digital Indicator (0–50 mm) — Microtech Metrology The Thickness Gauge is a compact, ISO‑calibrated digital measuring instrument designed for precise thickness checks in workshops and laboratories. ISO 17025 calibrated delivery certificate Measuring range 0–50 mm Readout resolution 0.001 mm Measuring faces Ø10 mm Consistent measurement performance for production control Built for repeatable checks, this instrument combines a digital indicator with a fine display step of 0.001 mm, allowing detailed readouts that support fast decision‑making on the shop floor. The specified nominal accuracy of ±0.04 mm provides an objective tolerance framework for quality control; paired with regular calibration, the result is a measurement routine that reduces rejects and rework. The digital display simplifies data reading and shortens inspection cycles, which improves throughput without sacrificing documented reliability. Compact form that fits fine mechanical applications With a measuring range of 0–50 mm, the tool falls into the micro class for compact calipers and gauges, making it suitable for fine mechanical components where stiffness and short jaws help avoid deformation. The measuring faces Ø10 mm give a defined contact area for consistent pressure distribution, while the long reach — measuring depth 800 mm — facilitates measurements on parts requiring deeper access than typical bench gauges. The compact footprint and ergonomic handling reduce operator fatigue during repetitive tasks and maintain measurement stability for small parts production. Calibrated delivery and documentation for audits The instrument is supplied fully calibrated under ISO 17025, and a calibration certificate is included with delivery, ensuring traceable calibration for internal audits and supplier control records. This certified status streamlines quality assurance processes, minimises administrative follow‑up and demonstrates conformity to external inspection requirements. The combination of documented calibration and clear numerical performance specifications supports procurement decisions where auditability and documented accuracy are mandatory. Contact Metav Werkzeuge for a technical match and request the included ISO 17025 calibration certificate to ensure this Microtech Metrology thickness gauge suits the application Technical Data Article number: 137050808 GTIN: 4061905045332 Manufacturer: Microtech Metrology Digital: yes ISO 17025: yes Numbers / Core technical data Measuring range: 0–50 mm Resolution: 0.001 mm Nominal accuracy: ±0.04 mm Measuring faces diameter: 10 mm Measuring depth: 800 mm Special features / Versions Digital indicator readout Supplied with ISO 17025 calibration certificate Category: Dial gauges / measuring instruments Compact micro class suitable for fine mechanical parts FAQ What is the display resolution of this gauge? The display resolution is 0.001 mm, allowing fine incremental readings on the digital indicator. Is the instrument delivered calibrated? Yes, the gauge is supplied fully calibrated under ISO 17025 and includes the calibration certificate with delivery. What measurement range does the instrument cover? The measuring range is 0–50 mm, classifying it in the micro segment for compact precision tasks. Can this gauge be used for small, delicate components? The compact design, measuring faces Ø10 mm and micro classification make the gauge suitable for fine mechanical and delicate parts inspection. What accuracy can be expected during routine checks? Routine measurements should be considered against the nominal accuracy of ±0.04 mm, with traceable calibration ensuring results are auditable. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50mm Thickness Gauge Digital Indicator, 0.001mm Resolution, ISO 17025 Calibrated - Microtech Metrology
Taking advantage of traceable calibration, ultra-fine display resolution and a 300 mm probe depth facilitates precise thickness control across production and inspection tasks; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital Thickness Gauge — Microtech Metrology | 0–50 mm, 0.001 mm resolution The Digital Thickness Gauge is a compact measuring instrument for precise thickness checks in workshop environments and quality control, offering a digital display for fast, repeatable readings across small and medium-sized components. 0–50 mm measuring range 0.001 mm display resolution ISO 17025 calibrated with certificate 300 mm probe depth for recessed parts Reliable measurement performance for quality assurance With a measuring range of 0–50 mm and a display resolution of 0.001 mm, the instrument delivers measurement detail that supports tight tolerance control and rapid decision-making on the shopfloor. The specified accuracy of 0.025 mm gives a clear technical yardstick for inspection plans and reduction of scrap rates. The digital display speeds up read‑out and reduces transcription errors compared with analogue alternatives, which translates into measurable productivity gains during batch inspections and incoming‑goods checks. Practical design for workshop integration and versatile use A probe reach of 300 mm and 10 mm measuring faces provide access to recessed or awkwardly positioned test points, making the tool suitable for components, panels and assemblies where conventional gauges cannot reach. The compact form factor supports single‑handed operation and quick repositioning between measurement points, helping maintain throughput without compromising measurement repeatability. Where traceable documentation is required, the combination of digital read‑out and rugged probe geometry simplifies routine checks and reduces operator setup time. Traceable calibration and documentation for audits Delivered fully calibrated to ISO 17025 with a calibration certificate included, the gauge ensures measurement traceability for internal quality systems and external audits. The Microtech Metrology provenance indicates a focus on metrological competence and enables consistent reporting across inspection routines. This traceability supports supplier qualification and regulatory compliance tasks and allows the device to be integrated into formal quality records with confidence. Choose Microtech Metrology’s Digital Thickness Gauge for traceable, workshop‑ready measurement — contact Metav Werkzeuge in Emmerich for tailored technical advice and quick supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 137050308 GTIN: 4061905043994 Manufacturer: Microtech Metrology Category: Dial gauges Facts Measuring range: 0–50 mm Resolution (display): 0.001 mm Accuracy: 0.025 mm Measuring faces: 10 mm Measuring depth: 300 mm Digital: yes Special features ISO 17025 calibration certificate included Compact design for workshop use Suitable for production and laboratory inspection Microtech Metrology brand FAQ What measuring range does the gauge cover? The Digital Thickness Gauge covers a measuring range of 0–50 mm, suitable for small to medium components. What resolution and accuracy can be expected? Readings are delivered at a resolution of 0.001 mm with an accuracy rating of 0.025 mm, which supports fine tolerance checks. Is the instrument delivered calibrated? Yes; the gauge is supplied with an ISO 17025 calibration and an accompanying certificate for traceability. Can recessed parts be measured with this instrument? The 300 mm probe depth and 10 mm measuring faces allow access to recessed and awkwardly positioned surfaces for reliable thickness checks. Who manufactures this gauge and what is the SKU? The gauge is produced by Microtech Metrology and listed as SKU 137050308 Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50mm Thickness Gauge Digital Wireless USB, 0.0001mm Resolution, ISO 17025 Calibrated - Microtech Metrology
High-resolution measurement, reliable data transfer and ISO 17025 traceability make this instrument a practical choice for demanding quality-control workflows; benefit from a 0.0001 mm readout, Wireless + USB data output and a supplied calibration certificate. Order directly via Metav Werkzeuge or contact our consultants for specification advice. Thickness Gauge with Microcomputer — Digital, Wireless+USB (Microtech Metrology) The thickness gauge with microcomputer is a digital measuring instrument designed for precise material-thickness checks in laboratory and production inspection environments. *Digital readout with 0.0001 mm resolution *Wireless and USB data output *ISO 17025 calibrated with certificate *50 mm measuring range, 300 mm measuring depth Precision and traceability tailored to quality control High-frequency production and laboratory testing require both fine resolution and documented traceability. The instrument delivers a 0.0001 mm display increment together with an assessed accuracy of ±0.021 mm, which supports more consistent pass/fail decisions than coarser indicators. The combination of fine resolution and documented measurement uncertainty reduces rework and scrap, and the supplied calibration certificate demonstrates that readings can be traced to national standards, simplifying audit preparation and long-term quality records. Faster, error‑resistant data capture for process integration Integrated Wireless and USB outputs, controlled by the built-in microcomputer, enable direct transfer of measured values into inspection logs and statistical software. Automated data export removes manual transcription, accelerates batch reporting and lowers the risk of logging errors; this improves throughput in busy metrology stations. Compatibility with common data‑logging workflows means the device functions as both an immediate measuring tool and a consistent source of digital measurement data for process control. Practical design for workshop and laboratory use The instrument covers a 0–50 mm measuring range while offering a 300 mm measuring depth for access to recessed areas and fixtures; contact faces 10 mm support repeatable seating on flat or contoured samples. The digital construction and compact control electronics make the unit robust enough for shop‑floor handling while remaining suitable for detailed laboratory tasks. Delivered fully calibrated to ISO 17025, the instrument arrives ready for immediate use with full documentation, supporting rapid integration into existing quality systems supplied by Microtech Metrology. Contact Metav Werkzeuge for procurement and technical advice on Microtech Metrology thickness gauges; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 137050307 GTIN: 4061905044007 Manufacturer: Microtech Metrology Core specifications Measuring range: 0–50 mm Resolution (display): 0.0001 mm Accuracy: ±0.021 mm Measuring depth: 300 mm Contact faces: 10 mm Special features Data output: Wireless + USB Delivered calibrated to ISO 17025 with calibration certificate Microcomputer-controlled digital readout Digital instrument suitable for laboratory and shop use FAQ What resolution and accuracy does the instrument provide? The thickness gauge with microcomputer offers a resolution of 0.0001 mm and an assessed accuracy of ±0.021 mm, suitable for stringent inspection tasks. Is the instrument supplied with official calibration documentation? Yes. The Microtech Metrology thickness gauge is supplied fully calibrated to ISO 17025 and includes a calibration certificate for traceability. How can measurement data be exported for analysis? Measurement values are exported via Wireless or USB interfaces, enabling direct capture into inspection software or data‑logging systems. What measurement range and access depth are available? The device covers 0–50 mm for thickness and provides a 300 mm measuring depth for reaching recessed measurement points. Is the unit suitable for both workshop and laboratory environments? The instrument is designed for shop‑floor robustness and laboratory accuracy, making it appropriate for production inspection and detailed quality control. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50mm Thickness Gauge Digital Wireless USB, ISO 17025 Calibrated, 0.0001mm Resolution - Microtech Metrology
The combination of high accuracy (0.045 mm), wireless + USB data output and delivery with an ISO 17025 calibration certificate ensures reliable, traceable thickness measurements for workshop and laboratory use. Order directly via Metav Werkzeuge or consult our specialists for application advice. Thickness Gauge – Digital Thickness Gauge by Microtech Metrology (Wireless + USB) The Thickness Gauge is a digital measuring instrument designed for precise thickness checks in workshops and inspection labs, covering a measuring range up to 50 mm and optimised for compact, repeatable measurements. High accuracy 0.045 mm Measurement range 0–50 mm Wireless and USB data output Supplied with ISO 17025 calibration Traceable results for quality control and process reliability This digital instrument delivers traceable measurement results, combining a declared accuracy of 0.045 mm with a fine display step of 0.0001 mm for clear readouts. The included ISO 17025 calibration certificate documents the instrument's conformity to international calibration standards and reduces administrative overhead during incoming inspection or internal audits. For production environments that require documented verification, the certified delivery removes the need for an immediate external calibration and speeds up qualification of tooling or incoming batches. Seamless data transfer to speed inspection workflows Equipped with Wireless + USB data output, the gauge simplifies data capture and logging during routine checks and small-batch inspections. Digital transmission reduces transcription errors and enables direct integration into inspection spreadsheets or measurement software, improving traceability and saving operator time. The combination of a stable wireless link and wired USB option supports both flexible shop-floor checks and desk-based documentation, enhancing throughput without compromising measurement integrity. Compact dimensions suited to fine and precision tasks With a measuring span limited to 0–50 mm, this device fits the micro class of gauges commonly used for fine mechanical and watchmaking tasks, model checks and small component series. The compact form factor is easy to position on small parts and remains torsion‑resistant during single‑handed operation, which helps maintain repeatable contact conditions and consistent results. The instrument is therefore particularly suited where handling space is restricted and high repeatability is required. Practical compliance and reduced setup time Delivered fully calibrated under ISO 17025, the gauge arrives ready for immediate use with a calibration certificate included. This saves set‑up time in controlled environments and provides confidence when the instrument is used for initial sample approvals or quality gate checks. The digital readout and standardised data interfaces ease integration into existing measurement routines, providing a pragmatic balance between usability and metrological rigour. Contact Metav Werkzeuge for tailored advice on application suitability or to secure the Microtech Metrology Thickness Gauge with ISO 17025 certification directly from our stock in Emmerich Technical Data Article number: 137050807 GTIN: 4061905045349 Manufacturer: Microtech Metrology Product: Thickness Gauge Facts Measurement range: 0–50 mm Accuracy: 0.045 mm Readability: 0.0001 mm Measuring depth: 800 mm Measuring faces: 10 Digital: yes Data output: Wireless + USB ECLASS: 21170535 Special features Supplied with ISO 17025 calibration certificate Compact design for micro-range measurements Suitable for workshop and laboratory use SKU: 137050807 FAQ What measuring range does the gauge cover? The Microtech Metrology Thickness Gauge covers a measuring range from 0 to 50 mm, making it suitable for fine mechanical and small-component inspections. Is a calibration certificate included with delivery? Yes, the device is supplied fully calibrated under ISO 17025 and includes the corresponding calibration certificate for traceable documentation. How are measurements exported from the instrument? Measurements can be transmitted wirelessly or via USB; the gauge supports both modes to integrate with inspection software or data logging systems. What level of accuracy can be expected in routine use? The instrument is specified with an accuracy of 0.045 mm and a display step of 0.0001 mm, providing reliable repeatability for standard workshop and laboratory checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
50mm Thickness Gauge Digital With 0.0001mm Resolution, Ø35/56mm Measuring Faces, 60s Timer - Microtech Metrology
Take advantage of a digital instrument that combines a compact 0–50 mm measuring range with laboratory-grade repeatability and a built-in 60 s timer; the result is fast, reproducible thickness control for soft and compressed materials. Order directly via Metav Werkzeuge or consult Metav's specialists for technical matching and supply. Thickness Gauge (0–50 mm) by Microtech Metrology — Digital, DIN 53855-1 The Thickness Gauge is a digital measuring instrument for precise thickness control of soft and compressed materials in production and laboratory environments Digital display with 0.01 mm resolution Measurement range 0–50 mm Accuracy 0.01–0.02 mm per DIN 53855-1 Integrated 60 s timer function Reliable thickness control for repeatable processes The compact digital instrument delivers a 0–50 mm measuring range that is ideally suited to close-tolerance checks on soft materials. With an indicated accuracy of 0.01–0.02 mm and conformance to DIN 53855-1, the device reduces uncertainty in routine inspections and in-process control. The short measuring span keeps the mechanical path stiff and stable, which translates into fewer re-measurements and a more efficient quality workflow. This combination of standard compliance and measurable precision supports traceable decisions in production environments. Clear readouts and consistent contact conditions A digital readout and fine resolution enable fast visual decisions while the instrument's defined measuring forces improve reproducibility between operators. The unit records four selectable contact forces (0.49 / 2.45 / 1.23 / 6.13 N), allowing adaptation to delicate surfaces without damage and ensuring consistent compression of soft specimens. Larger and smaller measuring faces (Ø 35.69 mm / 56.34 mm) permit repeatable contact geometry for both small samples and broader textile swatches, which helps maintain statistical comparability across batches. Designed for soft and compressed materials testing This gauge is purpose-built for soft materials, including compressed textiles and technical nonwovens, where controlled force and contact area are essential. The integrated 60 s timer supports dwell-time measurements and reduces operator variation by allowing a standardised measurement interval. For manufacturers and testing labs assessing material compressibility or thickness retention, the instrument supplies meaningful, repeatable results that feed directly into production decisions or specification compliance. Practical features that speed up measurement tasks The measuring instrument is digital and compact, making it suitable for bench-top quality control or a small laboratory setting. A clear numerical display and quick measurement cycle reduce handling time and help maintain throughput without sacrificing accuracy. The compact format and defined force settings simplify operator training and improve first-pass acceptance rates, while the compliance with DIN 53855-1 underlines its suitability for formalised testing routines. For procurement, the device represents a focused solution where precise thickness control of soft goods is required. Contact Metav Werkzeuge for tailored technical advice and procurement of Microtech Metrology's digital thickness gauge with 0–50 mm range and integrated 60 s timer Technical Data Article number: 137331263 GTIN: 4061905451669 Brand: Microtech Metrology Category: Dial gauges / thickness instruments Facts Measurement range: 0–50 mm Display resolution (reading): 0.0001 Indicated accuracy: 0.01–0.02 mm Measuring faces: Ø 35.69 mm / 56.34 mm Measuring force: 0.49 N / 2.45 N / 1.23 N / 6.13 N Standard: DIN 53855-1 Special features Digital readout Integrated 60 s timer Suitable for compressed textiles Compact bench-top format SKU: 137331263 FAQ What is the measuring range of this instrument? The measuring range is 0–50 mm; the compact span is optimised for precise thickness checks on soft materials. How accurate are the readings and which standard applies? The instrument provides an indicated accuracy of 0.01–0.02 mm and is specified to DIN 53855-1 for material thickness testing. Can the device handle delicate textiles without damage? Yes—selectable measuring forces (0.49 / 2.45 / 1.23 / 6.13 N) and two measuring face diameters ensure controlled contact suitable for compressed textiles. Is there a timed measurement option to standardise readings? An integrated 60 s timer is included to support dwell-time measurements and reduce operator influence on results. Which product identifier should be used when ordering or requesting data sheets? Refer to Microtech Metrology thickness gauge, SKU 137331263, and GTIN 4061905451669 for enquiries and order references. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
Reliable thickness measurement at the workbench
Thickness measurement, also referred to as thickness gauging or thickness testing, is a core quality assurance routine in metalworking and workshop environments. It covers fast, flexible checks at the workbench and ensures that dimensional tolerances are monitored during production.
How the common hand tools work and where to use them
The most frequently used instrument for thickness measurement is the outside micrometer with ratchet, which ensures a constant measuring pressure and thus reduces subjective operator influence. For universal tasks, the caliper remains indispensable; however, because a caliper lacks a defined contact pressure it is more susceptible to pivoting errors, particularly on softer materials. When measuring elastic or very thin workpieces, dial thickness gauges with a defined spring force are often used because they keep the contact force independent of the operator and deliver high reproducibility. External influences must be considered for all hand tools: thermal expansion caused by body heat can affect readings, so instruments should not be held for long periods and must be checked against reference gauge blocks at room temperature.
Practical benefits that improve shop-floor performance
- Reduced operator influence through constant measuring pressure provided by the outside micrometer with ratchet.
- Higher reproducibility when using dial thickness gauges with defined spring force.
- Faster in-process control, enabling immediate corrective action when tolerances deviate.
- Versatility across measurement tasks thanks to the combination of calipers for general checks and micrometres or thickness gauges for precision points.
- Lower rework rates by catching deviations early in the process.
Metav: a dependable precision partner for everyday precision
Metav democratises precision: from its site in Emmerich on the Rhine the company acts as a quality filter for the European market, making high-accuracy measurement accessible to workshops and industry alike. With more than 48,000 customers and a catalogue exceeding 250,000 products, Metav combines decades of technical expertise with a comprehensive range for industry, trades and distributors. For advice on selecting the right thickness measurement tools or on calibration practices, Metav’s specialists can provide tailored guidance to match specific workshop conditions.
Summary
Accurate thickness measurement is the basis for process-related quality control: using the right mix of outside micrometers, calipers and dial thickness gauges minimises operator error, improves reproducibility and allows immediate intervention in the manufacturing process.
FAQ
Which instrument gives the most reproducible thickness reading for thin, elastic materials?
For thin or elastic parts, a dial thickness gauge with a defined spring force typically provides the most reproducible results; within thickness measurement practice, an outside micrometer with ratchet is preferred for general high-precision readings.
How can thermal influence be minimised during hand measurement?
Thermal influence is reduced by avoiding prolonged handling of the instrument, allowing tools to equilibrate at room temperature and routinely checking them against reference gauge blocks as part of thickness measurement procedures.
When is a caliper still appropriate despite its lack of defined contact pressure?
A caliper is appropriate for universal and quick checks, larger features or when speed is required; for critical tolerances within thickness measurement, complementing the caliper with a micrometer or thickness gauge is recommended.
What routine checks maintain accuracy of hand measuring tools?
Regular zero checks, calibration against reference gauge blocks and inspection of the micrometer ratchet or the spring force of thickness gauges are standard procedures to ensure reliable thickness measurement.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com